Attachment 663271 Details for Bug 887056 – File: dmesg

File: dmesg

dmesg (text/plain), 199.00 KB, created by J L on 2012-12-14 00:20:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: J L

Created: 2012-12-14 00:20:57 UTC

Size: 199.00 KB

patch

obsolete

>[    0.127609] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.127616] pci 0000:00:02.0: reg 20: [io  0x6000-0x6007]
>[    0.127659] pci 0000:00:02.1: [8086:2a13] type 00 class 0x038000
>[    0.127672] pci 0000:00:02.1: reg 10: [mem 0xe8500000-0xe85fffff 64bit]
>[    0.127769] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
>[    0.127829] pci 0000:00:1a.0: reg 20: [io  0x6020-0x603f]
>[    0.127891] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
>[    0.127917] pci 0000:00:1a.7: reg 10: [mem 0xe8600000-0xe86003ff]
>[    0.128033] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>[    0.128070] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
>[    0.128094] pci 0000:00:1b.0: reg 10: [mem 0xe8604000-0xe8607fff 64bit]
>[    0.128205] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.128240] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
>[    0.128356] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.128395] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
>[    0.128512] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.128553] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
>[    0.128671] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[    0.128709] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
>[    0.128825] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>[    0.128860] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
>[    0.128919] pci 0000:00:1d.0: reg 20: [io  0x6040-0x605f]
>[    0.128964] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
>[    0.129029] pci 0000:00:1d.1: reg 20: [io  0x6060-0x607f]
>[    0.129075] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
>[    0.129134] pci 0000:00:1d.2: reg 20: [io  0x6080-0x609f]
>[    0.129196] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
>[    0.129221] pci 0000:00:1d.7: reg 10: [mem 0xe8608000-0xe86083ff]
>[    0.129334] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.129363] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.129467] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
>[    0.129585] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
>[    0.129592] pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 GPIO
>[    0.129597] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
>[    0.129606] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
>[    0.129665] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
>[    0.129683] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>[    0.129696] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>[    0.129708] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
>[    0.129721] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
>[    0.129734] pci 0000:00:1f.1: reg 20: [io  0x60a0-0x60af]
>[    0.129791] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
>[    0.129820] pci 0000:00:1f.2: reg 10: [io  0x13f0-0x13f7]
>[    0.129833] pci 0000:00:1f.2: reg 14: [io  0x15f4-0x15f7]
>[    0.129846] pci 0000:00:1f.2: reg 18: [io  0x1370-0x1377]
>[    0.129858] pci 0000:00:1f.2: reg 1c: [io  0x1574-0x1577]
>[    0.129871] pci 0000:00:1f.2: reg 20: [io  0x60e0-0x60ff]
>[    0.129885] pci 0000:00:1f.2: reg 24: [mem 0xe8609000-0xe86097ff]
>[    0.129955] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.130045] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
>[    0.130050] pci 0000:00:1c.0: PCI bridge to [bus 08]
>[    0.130125] pci_bus 0000:10: busn_res: [bus 10] is inserted under [bus 00-ff]
>[    0.130201] pci 0000:10:00.0: [8086:4237] type 00 class 0x028000
>[    0.130265] pci 0000:10:00.0: reg 10: [mem 0xe8000000-0xe8001fff 64bit]
>[    0.130510] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
>[    0.132041] pci 0000:00:1c.1: PCI bridge to [bus 10]
>[    0.132051] pci 0000:00:1c.1:   bridge window [mem 0xe8000000-0xe80fffff]
>[    0.132121] pci_bus 0000:28: busn_res: [bus 28] is inserted under [bus 00-ff]
>[    0.132125] pci 0000:00:1c.4: PCI bridge to [bus 28]
>[    0.132131] pci 0000:00:1c.4:   bridge window [io  0x4000-0x5fff]
>[    0.132137] pci 0000:00:1c.4:   bridge window [mem 0xe4000000-0xe7ffffff]
>[    0.132206] pci_bus 0000:30: busn_res: [bus 30] is inserted under [bus 00-ff]
>[    0.132241] pci 0000:30:00.0: [11ab:4357] type 00 class 0x020000
>[    0.132277] pci 0000:30:00.0: reg 10: [mem 0xe0000000-0xe0003fff 64bit]
>[    0.132297] pci 0000:30:00.0: reg 18: [io  0x2000-0x20ff]
>[    0.132454] pci 0000:30:00.0: supports D1 D2
>[    0.132457] pci 0000:30:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.134001] pci 0000:00:1c.5: PCI bridge to [bus 30]
>[    0.134007] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
>[    0.134013] pci 0000:00:1c.5:   bridge window [mem 0xe0000000-0xe00fffff]
>[    0.134054] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
>[    0.134124] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
>[    0.134139] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.134142] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.134145] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.134148] pci 0000:00:1e.0:   bridge window [mem 0xbf800000-0xfedfffff] (subtractive decode)
>[    0.134151] pci 0000:00:1e.0:   bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
>[    0.134153] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000dffff] (subtractive decode)
>[    0.134188] pci_bus 0000:00: on NUMA node 0
>[    0.134192] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
>[    0.134435] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B6._PRT]
>[    0.134514] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C125._PRT]
>[    0.134567] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C139._PRT]
>[    0.134626] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13C._PRT]
>[    0.134712] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C13D._PRT]
>[    0.134773]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
>[    0.134775]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
>[    0.151631] ACPI: PCI Interrupt Link [C135] (IRQs *10 11)
>[    0.151724] ACPI: PCI Interrupt Link [C136] (IRQs *10 11)
>[    0.151813] ACPI: PCI Interrupt Link [C137] (IRQs 10 *11)
>[    0.151894] ACPI: PCI Interrupt Link [C138] (IRQs 10 11) *0, disabled.
>[    0.151989] ACPI: PCI Interrupt Link [C148] (IRQs *10 11)
>[    0.152077] ACPI: PCI Interrupt Link [C149] (IRQs *10 11)
>[    0.152158] ACPI: PCI Interrupt Link [C14A] (IRQs 10 11) *0, disabled.
>[    0.152197] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20120711/pci_link-184)
>[    0.152268] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.152268] vgaarb: loaded
>[    0.152268] vgaarb: bridge control possible 0000:00:02.0
>[    0.152268] SCSI subsystem initialized
>[    0.152268] ACPI: bus type scsi registered
>[    0.152268] libata version 3.00 loaded.
>[    0.152268] ACPI: bus type usb registered
>[    0.152268] usbcore: registered new interface driver usbfs
>[    0.152268] usbcore: registered new interface driver hub
>[    0.152268] usbcore: registered new device driver usb
>[    0.152268] PCI: Using ACPI for IRQ routing
>[    0.154410] PCI: pci_cache_line_size set to 64 bytes
>[    0.154549] Expanded resource reserved due to conflict with PCI Bus 0000:00
>[    0.154553] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>[    0.154556] e820: reserve RAM buffer [mem 0xbf7b0000-0xbfffffff]
>[    0.154667] NetLabel: Initializing
>[    0.154669] NetLabel:  domain hash size = 128
>[    0.154671] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.154682] NetLabel:  unlabeled traffic allowed by default
>[    0.154852] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.154858] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.154863] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.157992] Switching to clocksource hpet
>[    0.167476] pnp: PnP ACPI init
>[    0.167498] ACPI: bus type pnp registered
>[    0.167615] pnp 00:00: [mem 0x00000000-0x0009ffff]
>[    0.167618] pnp 00:00: [mem 0x000e0000-0x000fffff]
>[    0.167621] pnp 00:00: [mem 0x00100000-0xbf7fffff]
>[    0.167681] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.167685] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
>[    0.167688] system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved
>[    0.167693] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.171028] pnp 00:01: [bus 00-ff]
>[    0.171032] pnp 00:01: [io  0x0cf8-0x0cff]
>[    0.171037] pnp 00:01: [io  0x0000-0x0cf7 window]
>[    0.171040] pnp 00:01: [io  0x0d00-0xffff window]
>[    0.171042] pnp 00:01: [mem 0x000a0000-0x000bffff window]
>[    0.171045] pnp 00:01: [mem 0xbf800000-0xfedfffff window]
>[    0.171048] pnp 00:01: [mem 0xfee01000-0xffffffff window]
>[    0.171050] pnp 00:01: [mem 0x000d4000-0x000dffff window]
>[    0.171125] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>[    0.171305] pnp 00:02: [io  0x00f0-0x00ff]
>[    0.171320] pnp 00:02: [irq 13]
>[    0.171350] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.171363] pnp 00:03: [io  0x0000-0x000f]
>[    0.171365] pnp 00:03: [io  0x0080-0x008f]
>[    0.171368] pnp 00:03: [io  0x00c0-0x00df]
>[    0.171370] pnp 00:03: [dma 4]
>[    0.171402] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.171411] pnp 00:04: [io  0x0061]
>[    0.171440] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.171450] pnp 00:05: [io  0x0070-0x0071]
>[    0.171453] pnp 00:05: [io  0x0072-0x0073]
>[    0.171459] pnp 00:05: [irq 8]
>[    0.171488] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.171557] pnp 00:06: [mem 0xfed00000-0xfed003ff]
>[    0.171591] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.171602] pnp 00:07: [io  0x0060]
>[    0.171604] pnp 00:07: [io  0x0064]
>[    0.171610] pnp 00:07: [irq 1]
>[    0.171641] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.171654] pnp 00:08: [irq 12]
>[    0.171686] pnp 00:08: Plug and Play ACPI device, IDs SYN0159 SYN0100 SYN0002 PNP0f13 (active)
>[    0.171766] pnp 00:09: [io  0x0010-0x001f]
>[    0.171769] pnp 00:09: [io  0x0024-0x003f]
>[    0.171771] pnp 00:09: [io  0x004e-0x004f]
>[    0.171774] pnp 00:09: [io  0x0050-0x0053]
>[    0.171776] pnp 00:09: [io  0x0063]
>[    0.171778] pnp 00:09: [io  0x0065]
>[    0.171780] pnp 00:09: [io  0x0067]
>[    0.171783] pnp 00:09: [io  0x0074-0x0077]
>[    0.171785] pnp 00:09: [io  0x0090-0x009f]
>[    0.171788] pnp 00:09: [io  0x00a4-0x00bd]
>[    0.171790] pnp 00:09: [io  0x0500-0x057f]
>[    0.171792] pnp 00:09: [io  0x0800-0x080f]
>[    0.171795] pnp 00:09: [mem 0xffb00000-0xffbfffff]
>[    0.171797] pnp 00:09: [mem 0xfff00000-0xffffffff]
>[    0.171861] system 00:09: [io  0x0500-0x057f] has been reserved
>[    0.171864] system 00:09: [io  0x0800-0x080f] has been reserved
>[    0.171868] system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
>[    0.171871] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
>[    0.171875] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.172541] pnp 00:0a: [io  0x04d0-0x04d1]
>[    0.172544] pnp 00:0a: [io  0x1000-0x107f]
>[    0.172547] pnp 00:0a: [io  0x1100-0x113f]
>[    0.172549] pnp 00:0a: [io  0x1200-0x121f]
>[    0.172552] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
>[    0.172554] pnp 00:0a: [mem 0xfec00000-0xfec000ff]
>[    0.172557] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
>[    0.172559] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
>[    0.172562] pnp 00:0a: [mem 0xfed90000-0xfed99fff]
>[    0.172635] system 00:0a: [io  0x04d0-0x04d1] has been reserved
>[    0.172638] system 00:0a: [io  0x1000-0x107f] has been reserved
>[    0.172641] system 00:0a: [io  0x1100-0x113f] has been reserved
>[    0.172644] system 00:0a: [io  0x1200-0x121f] has been reserved
>[    0.172648] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.172651] system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved
>[    0.172654] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.172657] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.172660] system 00:0a: [mem 0xfed90000-0xfed99fff] has been reserved
>[    0.172664] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.173618] pnp 00:0b: [mem 0x000cec00-0x000cffff]
>[    0.173621] pnp 00:0b: [mem 0x000d1000-0x000d3fff]
>[    0.173624] pnp 00:0b: [mem 0xfeda0000-0xfedbffff]
>[    0.173627] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
>[    0.173703] system 00:0b: [mem 0x000cec00-0x000cffff] has been reserved
>[    0.173706] system 00:0b: [mem 0x000d1000-0x000d3fff] has been reserved
>[    0.173709] system 00:0b: [mem 0xfeda0000-0xfedbffff] has been reserved
>[    0.173712] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.173716] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.173731] pnp: PnP ACPI: found 12 devices
>[    0.173733] ACPI: ACPI bus type pnp unregistered
>[    0.210917] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 10] add_size 1000
>[    0.210922] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10] add_size 200000
>[    0.210935] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 28] add_size 200000
>[    0.210961] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.210964] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.210967] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.210973] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
>[    0.210977] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
>[    0.210981] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
>[    0.210984] pci 0000:00:1c.0: PCI bridge to [bus 08]
>[    0.211010] pci 0000:00:1c.1: PCI bridge to [bus 10]
>[    0.211015] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>[    0.211022] pci 0000:00:1c.1:   bridge window [mem 0xe8000000-0xe80fffff]
>[    0.211028] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
>[    0.211036] pci 0000:00:1c.4: PCI bridge to [bus 28]
>[    0.211040] pci 0000:00:1c.4:   bridge window [io  0x4000-0x5fff]
>[    0.211047] pci 0000:00:1c.4:   bridge window [mem 0xe4000000-0xe7ffffff]
>[    0.211053] pci 0000:00:1c.4:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
>[    0.211061] pci 0000:00:1c.5: PCI bridge to [bus 30]
>[    0.211065] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
>[    0.211072] pci 0000:00:1c.5:   bridge window [mem 0xe0000000-0xe00fffff]
>[    0.211084] pci 0000:00:1e.0: PCI bridge to [bus 02]
>[    0.211140] pci 0000:00:1e.0: setting latency timer to 64
>[    0.211145] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.211147] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.211150] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.211153] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xfedfffff]
>[    0.211155] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
>[    0.211158] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000dffff]
>[    0.211161] pci_bus 0000:10: resource 0 [io  0x3000-0x3fff]
>[    0.211163] pci_bus 0000:10: resource 1 [mem 0xe8000000-0xe80fffff]
>[    0.211166] pci_bus 0000:10: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
>[    0.211169] pci_bus 0000:28: resource 0 [io  0x4000-0x5fff]
>[    0.211171] pci_bus 0000:28: resource 1 [mem 0xe4000000-0xe7ffffff]
>[    0.211174] pci_bus 0000:28: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
>[    0.211176] pci_bus 0000:30: resource 0 [io  0x2000-0x2fff]
>[    0.211179] pci_bus 0000:30: resource 1 [mem 0xe0000000-0xe00fffff]
>[    0.211182] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
>[    0.211185] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
>[    0.211187] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.211190] pci_bus 0000:02: resource 7 [mem 0xbf800000-0xfedfffff]
>[    0.211192] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
>[    0.211195] pci_bus 0000:02: resource 9 [mem 0x000d4000-0x000dffff]
>[    0.211237] NET: Registered protocol family 2
>[    0.211416] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.211873] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.212082] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.212104] TCP: reno registered
>[    0.212108] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.212116] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.212195] NET: Registered protocol family 1
>[    0.212214] pci 0000:00:02.0: Boot video device
>[    0.212453] PCI: CLS 64 bytes, default 64
>[    0.212510] Unpacking initramfs...
>[    0.620931] Freeing initrd memory: 16712k freed
>[    0.629965] apm: BIOS not found.
>[    0.630364] audit: initializing netlink socket (disabled)
>[    0.630380] type=2000 audit(1355199261.629:1): initialized
>[    0.650949] bounce pool size: 64 pages
>[    0.650962] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    0.652939] VFS: Disk quotas dquot_6.5.2
>[    0.652996] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.653552] msgmni has been set to 1686
>[    0.653625] SELinux:  Registering netfilter hooks
>[    0.654235] alg: No test for stdrng (krng)
>[    0.654244] NET: Registered protocol family 38
>[    0.654286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    0.654317] io scheduler noop registered
>[    0.654320] io scheduler deadline registered
>[    0.654329] io scheduler cfq registered (default)
>[    0.654529] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>[    0.654673] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
>[    0.654812] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
>[    0.654954] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
>[    0.655075] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.655098] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.655100] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.655361] acpiphp: Slot [1] registered
>[    0.655558] intel_idle: does not run on family 6 model 15
>[    0.659884] ACPI: AC Adapter [C244] (on-line)
>[    0.660140] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
>[    0.660145] ACPI: Sleep Button [C2BE]
>[    0.660192] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>[    0.660227] ACPI: Lid Switch [C15B]
>[    0.660276] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    0.660279] ACPI: Power Button [PWRF]
>[    0.660378] ACPI: Fan [C3C6] (off)
>[    0.660437] ACPI: Fan [C3C7] (off)
>[    0.660496] ACPI: Fan [C3C8] (off)
>[    0.660552] ACPI: Fan [C3C9] (off)
>[    0.660609] ACPI: Fan [C3CA] (off)
>[    0.660841] ACPI: Requesting acpi_cpufreq
>[    0.664499] Monitor-Mwait will be used to enter C-1 state
>[    0.664506] Monitor-Mwait will be used to enter C-2 state
>[    0.664510] Monitor-Mwait will be used to enter C-3 state
>[    0.664514] tsc: Marking TSC unstable due to TSC halts in idle
>[    0.664524] ACPI: acpi_idle registered with cpuidle
>[    0.673315] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.673318] ACPI: Thermal Zone [TZ3] (50 C)
>[    0.684039] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.684042] ACPI: Thermal Zone [TZ4] (31 C)
>[    0.687767] thermal LNXTHERM:02: registered as thermal_zone2
>[    0.687769] ACPI: Thermal Zone [TZ5] (74 C)
>[    0.705810] thermal LNXTHERM:03: registered as thermal_zone3
>[    0.705812] ACPI: Thermal Zone [TZ0] (63 C)
>[    0.709193] thermal LNXTHERM:04: registered as thermal_zone4
>[    0.709195] ACPI: Thermal Zone [TZ1] (59 C)
>[    0.709237] GHES: HEST is not enabled!
>[    0.709305] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.709986] Non-volatile memory driver v1.3
>[    0.709988] Linux agpgart interface v0.103
>[    0.710122] agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
>[    0.710162] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>[    0.710630] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>[    0.710809] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[    0.711797] loop: module loaded
>[    0.711872] ahci 0000:00:1f.2: version 3.0
>[    0.711935] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
>[    0.711974] ahci: SSS flag set, parallel bus scan disabled
>[    0.712021] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>[    0.712025] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc 
>[    0.712031] ahci 0000:00:1f.2: setting latency timer to 64
>[    0.712493] scsi0 : ahci
>[    0.712586] scsi1 : ahci
>[    0.712662] scsi2 : ahci
>[    0.712714] ata1: SATA max UDMA/133 abar m2048@0xe8609000 port 0xe8609100 irq 44
>[    0.712719] ata2: SATA max UDMA/133 abar m2048@0xe8609000 port 0xe8609180 irq 44
>[    0.712723] ata3: SATA max UDMA/133 abar m2048@0xe8609000 port 0xe8609200 irq 44
>[    0.712768] ata_piix 0000:00:1f.1: version 2.13
>[    0.712835] ata_piix 0000:00:1f.1: setting latency timer to 64
>[    0.713158] scsi3 : ata_piix
>[    0.713507] scsi4 : ata_piix
>[    0.713563] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
>[    0.713565] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
>[    0.713642] ata5: port disabled--ignoring
>[    0.713644] libphy: Fixed MDIO Bus: probed
>[    0.713848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.713879] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[    0.713884] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>[    0.713929] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>[    0.717837] ehci_hcd 0000:00:1a.7: debug port 1
>[    0.717847] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[    0.717867] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8600000
>[    0.723026] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>[    0.723062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.723065] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.723068] usb usb1: Product: EHCI Host Controller
>[    0.723070] usb usb1: Manufacturer: Linux 3.6.9-2.fc17.i686 ehci_hcd
>[    0.723072] usb usb1: SerialNumber: 0000:00:1a.7
>[    0.723270] hub 1-0:1.0: USB hub found
>[    0.723275] hub 1-0:1.0: 4 ports detected
>[    0.723373] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    0.723377] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    0.723427] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>[    0.727328] ehci_hcd 0000:00:1d.7: debug port 1
>[    0.727337] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[    0.727353] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8608000
>[    0.733023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    0.733056] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.733059] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.733061] usb usb2: Product: EHCI Host Controller
>[    0.733064] usb usb2: Manufacturer: Linux 3.6.9-2.fc17.i686 ehci_hcd
>[    0.733066] usb usb2: SerialNumber: 0000:00:1d.7
>[    0.733224] hub 2-0:1.0: USB hub found
>[    0.733229] hub 2-0:1.0: 6 ports detected
>[    0.733312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.733327] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.733352] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[    0.733356] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    0.733401] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[    0.733440] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00006020
>[    0.733475] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.733478] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.733481] usb usb3: Product: UHCI Host Controller
>[    0.733483] usb usb3: Manufacturer: Linux 3.6.9-2.fc17.i686 uhci_hcd
>[    0.733485] usb usb3: SerialNumber: 0000:00:1a.0
>[    0.733605] hub 3-0:1.0: USB hub found
>[    0.733609] hub 3-0:1.0: 2 ports detected
>[    0.733688] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    0.733692] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    0.733735] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>[    0.733765] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006040
>[    0.733806] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.733808] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.733811] usb usb4: Product: UHCI Host Controller
>[    0.733813] usb usb4: Manufacturer: Linux 3.6.9-2.fc17.i686 uhci_hcd
>[    0.733816] usb usb4: SerialNumber: 0000:00:1d.0
>[    0.733933] hub 4-0:1.0: USB hub found
>[    0.733939] hub 4-0:1.0: 2 ports detected
>[    0.734026] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    0.734030] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    0.734075] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>[    0.734115] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006060
>[    0.734150] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.734152] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.734155] usb usb5: Product: UHCI Host Controller
>[    0.734157] usb usb5: Manufacturer: Linux 3.6.9-2.fc17.i686 uhci_hcd
>[    0.734160] usb usb5: SerialNumber: 0000:00:1d.1
>[    0.734279] hub 5-0:1.0: USB hub found
>[    0.734283] hub 5-0:1.0: 2 ports detected
>[    0.734359] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    0.734363] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    0.734409] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>[    0.734438] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006080
>[    0.734472] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.734475] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.734477] usb usb6: Product: UHCI Host Controller
>[    0.734480] usb usb6: Manufacturer: Linux 3.6.9-2.fc17.i686 uhci_hcd
>[    0.734482] usb usb6: SerialNumber: 0000:00:1d.2
>[    0.734595] hub 6-0:1.0: USB hub found
>[    0.734599] hub 6-0:1.0: 2 ports detected
>[    0.734713] usbcore: registered new interface driver usbserial
>[    0.734725] usbcore: registered new interface driver usbserial_generic
>[    0.734733] USB Serial support registered for generic
>[    0.734736] usbserial: USB Serial Driver core
>[    0.734791] i8042: PNP: PS/2 Controller [PNP0303:C2A2,PNP0f13:C2A3] at 0x60,0x64 irq 1,12
>[    0.736439] i8042: Detected active multiplexing controller, rev 1.1
>[    0.737119] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.737125] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    0.737157] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    0.737182] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    0.737207] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    0.737344] mousedev: PS/2 mouse device common for all mice
>[    0.737571] rtc_cmos 00:05: RTC can wake from S4
>[    0.737784] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    0.737817] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    0.737923] device-mapper: uevent: version 1.0.3
>[    0.738057] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
>[    0.738155] cpuidle: using governor ladder
>[    0.738219] cpuidle: using governor menu
>[    0.738348] EFI Variables Facility v0.08 2004-May-17
>[    0.738472] usbcore: registered new interface driver usbhid
>[    0.738474] usbhid: USB HID core driver
>[    0.738502] drop_monitor: Initializing network drop monitor service
>[    0.738628] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    0.738669] TCP: cubic registered
>[    0.738671] Initializing XFRM netlink socket
>[    0.738798] NET: Registered protocol family 10
>[    0.739044] mip6: Mobile IPv6
>[    0.739047] NET: Registered protocol family 17
>[    0.739355] Using IPI No-Shortcut mode
>[    0.739502] PM: Hibernation image not present or could not be loaded.
>[    0.739512] registered taskstats version 1
>[    0.740055]   Magic number: 8:452:211
>[    0.740184] rtc_cmos 00:05: setting system clock to 2012-12-11 04:14:22 UTC (1355199262)
>[    0.747886] ACPI: Battery Slot [C245] (battery present)
>[    0.759156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    1.017140] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.021482] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.021493] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    1.021722] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[    1.021732] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.022774] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40J, max UDMA/100
>[    1.022782] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.027321] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.027331] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    1.027558] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[    1.027567] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.028611] ata1.00: configured for UDMA/100
>[    1.028967] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
>[    1.029340] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>[    1.029382] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.029469] sd 0:0:0:0: [sda] Write Protect is off
>[    1.029477] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.029534] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.049682]  sda: sda1 sda2
>[    1.050594] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.127148] usb 2-4: new high-speed USB device number 2 using ehci_hcd
>[    1.242686] usb 2-4: New USB device found, idVendor=058f, idProduct=6366
>[    1.242694] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.242701] usb 2-4: Product: Mass Storage Device
>[    1.242707] usb 2-4: Manufacturer: Generic
>[    1.242713] usb 2-4: SerialNumber: 058F63666433
>[    1.334132] ata2: SATA link down (SStatus 0 SControl 300)
>[    1.345141] usb 2-5: new high-speed USB device number 3 using ehci_hcd
>[    1.497935] usb 2-5: New USB device found, idVendor=04f2, idProduct=b159
>[    1.497943] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>[    1.497950] usb 2-5: Product: CNF8243
>[    1.497956] usb 2-5: Manufacturer: Chicony Electronics Co., Ltd.
>[    1.497962] usb 2-5: SerialNumber: SN0001
>[    1.621485] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
>[    1.639108] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.643234] ata3.00: ATAPI: hp       DVDRAM GT20L, DC05, max UDMA/100
>[    1.648062] ata3.00: configured for UDMA/100
>[    1.653558] scsi 2:0:0:0: CD-ROM            hp       DVDRAM GT20L     DC05 PQ: 0 ANSI: 5
>[    1.658561] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.658567] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.658868] sr 2:0:0:0: Attached scsi CD-ROM sr0
>[    1.659059] sr 2:0:0:0: Attached scsi generic sg1 type 5
>[    1.659428] Freeing unused kernel memory: 628k freed
>[    1.659984] Write protecting the kernel text: 5496k
>[    1.660126] Write protecting the kernel read-only data: 2164k
>[    1.671118] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4
>[    1.707038] usb 3-1: new full-speed USB device number 2 using uhci_hcd
>[    1.727671] dracut: dracut-018-105.git20120927.fc17
>[    1.760203] dracut: rd.luks=0: removing cryptoluks activation
>[    1.781814] udevd[119]: starting version 182
>[    1.817863] [drm] Initialized drm 1.1.0 20060810
>[    1.837841] i915 0000:00:02.0: setting latency timer to 64
>[    1.838114] i915 0000:00:02.0: irq 45 for MSI/MSI-X
>[    1.838124] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    1.838126] [drm] Driver supports precise vblank timestamp query.
>[    1.838169] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.863525] usb 3-1: New USB device found, idVendor=03f0, idProduct=231d
>[    1.863535] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.863542] usb 3-1: Product: HP Integrated Module
>[    1.863548] usb 3-1: Manufacturer: Broadcom Corp
>[    2.123870] [drm] initialized overlay support
>[    2.280725] fbcon: inteldrmfb (fb0) is primary device
>[    1.029556] ACPI: Invalid Power Resource to register!
>[    2.599641] Console: switching to colour frame buffer device 170x48
>[    2.611172] fb0: inteldrmfb frame buffer device
>[    2.611176] drm: registered panic notifier
>[    2.612753] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20120711/exoparg2-418)
>[    2.612766] ACPI Error: Method parse/execution failed [\_SB_.C003.C09E._DOD] (Node f3c376d8), AE_AML_PACKAGE_LIMIT (20120711/psparse-536)
>[    2.612775] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20120711/video-1149)
>[    2.615809] acpi device:01: registered as cooling_device7
>[    2.616101] ACPI: Video Device [C09E] (multi-head: yes  rom: no  post: no)
>[    2.616163] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    2.616580] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    2.620355] dracut: Starting plymouth daemon
>[    3.058511] dracut: rd.dm=0: removing DM RAID activation
>[    3.071757] dracut: rd.md=0: removing MD RAID activation
>[    3.183716] wmi: Mapper loaded
>[    3.196202] Initializing USB Mass Storage driver...
>[    3.203213] scsi5 : usb-storage 2-4:1.0
>[    3.203340] usbcore: registered new interface driver usb-storage
>[    3.203343] USB Mass Storage support registered.
>[    3.415706] dracut: Scanning devices sda2  for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root
>[    3.426294] dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit
>[    3.426501] dracut: inactive '/dev/VolGroup/lv_home' [177.44 GiB] inherit
>[    3.426692] dracut: inactive '/dev/VolGroup/lv_swap' [4.94 GiB] inherit
>[    3.942191] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
>[    4.049840] dracut: Checking ext4: /dev/mapper/VolGroup-lv_root
>[    4.050349] dracut: issuing e2fsck -a  /dev/mapper/VolGroup-lv_root
>[    4.108691] dracut: _Fedora-14-i686-: clean, 300211/3276800 files, 3506864/13107200 blocks
>[    4.109907] dracut: Remounting /dev/mapper/VolGroup-lv_root with -o ro
>[    4.160870] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
>[    4.165166] dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
>[    4.332703] scsi 5:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
>[    4.333427] sd 5:0:0:0: Attached scsi generic sg2 type 0
>[    4.406820] dracut: Switching root
>[    4.904065] usb 2-2: new high-speed USB device number 4 using ehci_hcd
>[    5.202710] SELinux: 2048 avtab hash slots, 103464 rules.
>[    5.230117] SELinux: 2048 avtab hash slots, 103464 rules.
>[    5.262546] usb 2-2: New USB device found, idVendor=12d1, idProduct=1c24
>[    5.262552] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[    5.262555] usb 2-2: Product: HUAWEI Mobile
>[    5.262558] usb 2-2: Manufacturer: HUAWEI
>[    5.264553] scsi6 : usb-storage 2-2:1.0
>[    5.264739] scsi7 : usb-storage 2-2:1.1
>[    5.279563] sd 5:0:0:0: [sdb] 7729152 512-byte logical blocks: (3.95 GB/3.68 GiB)
>[    5.280311] sd 5:0:0:0: [sdb] Write Protect is off
>[    5.280316] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
>[    5.281063] sd 5:0:0:0: [sdb] No Caching mode page present
>[    5.281068] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[    5.284312] sd 5:0:0:0: [sdb] No Caching mode page present
>[    5.284318] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[    5.285635]  sdb: sdb1
>[    5.288176] sd 5:0:0:0: [sdb] No Caching mode page present
>[    5.288181] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[    5.288185] sd 5:0:0:0: [sdb] Attached SCSI removable disk
>[    5.381570] SELinux:  9 users, 15 roles, 4213 types, 231 bools, 1 sens, 1024 cats
>[    5.381575] SELinux:  83 classes, 103464 rules
>[    5.387736] SELinux:  Permission wake_alarm in class capability2 not defined in policy.
>[    5.387740] SELinux:  Permission block_suspend in class capability2 not defined in policy.
>[    5.387746] SELinux: the above unknown classes and permissions will be allowed
>[    5.387755] SELinux:  Completing initialization.
>[    5.387756] SELinux:  Setting up existing superblocks.
>[    5.387763] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    5.387768] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>[    5.387784] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>[    5.387789] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[    5.387799] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    5.387819] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>[    5.388328] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>[    5.388333] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>[    5.389719] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>[    5.389725] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>[    5.389729] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>[    5.389743] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    5.389750] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[    5.389757] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>[    5.389778] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    5.390586] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    5.390591] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    5.390625] SELinux: initialized (dev dm-0, type ext4), uses xattr
>[    5.390831] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>[    5.410397] type=1403 audit(1355199267.168:2): policy loaded auid=4294967295 ses=4294967295
>[    5.441018] systemd[1]: Successfully loaded SELinux policy in 425ms 94us.
>[    5.609962] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    5.615115] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.675873] systemd[1]: Relabelled /dev and /run in 60ms 628us.
>[    5.720114] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.728101] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.733223] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.738147] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.743143] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.748146] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.753216] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.758136] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.758290] systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
>[    5.794568] systemd[1]: Set hostname to <localhost.localdomain>.
>[    6.267084] scsi 6:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
>[    6.267092] scsi 7:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[    6.268184] sd 7:0:0:0: Attached scsi generic sg3 type 0
>[    6.270309] sd 7:0:0:0: [sdc] Attached SCSI removable disk
>[    6.270435] sr1: scsi-1 drive
>[    6.270690] sr 6:0:0:0: Attached scsi CD-ROM sr1
>[    6.270844] sr 6:0:0:0: Attached scsi generic sg4 type 5
>[    7.928565] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[    7.972835] systemd[1]: media.mount: Directory /media to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)
>[    8.227799] systemd-journald[423]: Fixed max_use=151.1M max_size=18.8M min_size=64.0K keep_free=75.5M
>[    8.344252] systemd-journald[423]: Vacuuming...
>[    9.787439] udevd[422]: starting version 182
>[    9.862555] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
>[    9.863168] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    9.863491] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    9.884831] EXT4-fs (dm-0): re-mounted. Opts: (null)
>[    9.922628] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>[   13.046362] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
>[   13.110466] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[   13.110479] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
>[   13.111855] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[   13.111911] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   13.489150] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.C003.C004.C0D8 1 (20120711/utaddress-251)
>[   13.489163] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   13.489169] ACPI Warning: 0x00001100-0x0000113f SystemIO conflicts with Region \_SB_.C003.C004.C0EA 1 (20120711/utaddress-251)
>[   13.489175] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   13.489177] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   13.504827] iTCO_vendor_support: vendor-support=0
>[   13.505385] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[   13.505428] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>[   13.505753] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   13.577669] sky2: driver version 1.30
>[   13.577753] sky2 0000:30:00.0: Yukon-2 FE+ chip revision 0
>[   13.577870] sky2 0000:30:00.0: irq 46 for MSI/MSI-X
>[   13.578212] sky2 0000:30:00.0: eth0: addr 18:a9:05:d2:a8:d6
>[   13.791084] cfg80211: Calling CRDA to update world regulatory domain
>[   13.846344] Intel(R) Wireless WiFi driver for Linux, in-tree:d
>[   13.846348] Copyright(c) 2003-2012 Intel Corporation
>[   13.846446] iwlwifi 0000:10:00.0: pci_resource_len = 0x00002000
>[   13.846449] iwlwifi 0000:10:00.0: pci_resource_base = f7d14000
>[   13.846452] iwlwifi 0000:10:00.0: HW Revision ID = 0x0
>[   13.846605] iwlwifi 0000:10:00.0: irq 47 for MSI/MSI-X
>[   13.848643] iwlwifi 0000:10:00.0: loaded firmware version 8.83.5.1 build 33692
>[   13.872592] input: HP WMI hotkeys as /devices/virtual/input/input6
>[   13.886875] Bluetooth: Core ver 2.16
>[   13.886909] NET: Registered protocol family 31
>[   13.886911] Bluetooth: HCI device and connection manager initialized
>[   13.886914] Bluetooth: HCI socket layer initialized
>[   13.886916] Bluetooth: L2CAP socket layer initialized
>[   13.886921] Bluetooth: SCO socket layer initialized
>[   13.976139] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
>[   13.976143] iwldvm: Copyright(c) 2003-2012 Intel Corporation
>[   13.976167] iwlwifi 0000:10:00.0: CONFIG_IWLWIFI_DEBUG enabled
>[   13.976170] iwlwifi 0000:10:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
>[   13.976172] iwlwifi 0000:10:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
>[   13.976174] iwlwifi 0000:10:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
>[   13.976177] iwlwifi 0000:10:00.0: CONFIG_IWLWIFI_P2P disabled
>[   13.976180] iwlwifi 0000:10:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
>[   13.976289] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[   13.979301] iwlwifi 0000:10:00.0: RF_KILL bit toggled to enable radio.
>[   14.001097] iwlwifi 0000:10:00.0: device EEPROM VER=0x11f, CALIB=0x4
>[   14.001100] iwlwifi 0000:10:00.0: Device SKU: 0xF0
>[   14.001103] iwlwifi 0000:10:00.0: Valid Tx ant: 0x2, Valid Rx ant: 0x3
>[   14.001182] Registered led device: phy0-led
>[   14.047362] usbcore: registered new interface driver btusb
>[   14.049767] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>[   14.682502] Linux media interface: v0.10
>[   14.902728] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[   15.066292] Linux video capture interface: v2.00
>[   15.878648] ALSA sound/pci/hda/patch_sigmatel.c:5892 mute LED gpio 8 polarity 1
>[   15.878658] ALSA sound/pci/hda/hda_auto_parser.c:322 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
>[   15.878661] ALSA sound/pci/hda/hda_auto_parser.c:326    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   15.878664] ALSA sound/pci/hda/hda_auto_parser.c:330    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
>[   15.878666] ALSA sound/pci/hda/hda_auto_parser.c:331    mono: mono_out=0x0
>[   15.878668] ALSA sound/pci/hda/hda_auto_parser.c:335    inputs:
>[   15.878670] ALSA sound/pci/hda/hda_auto_parser.c:339      Mic=0xb
>[   15.878672] ALSA sound/pci/hda/hda_auto_parser.c:339      Internal Mic=0xc
>[   15.878868] ALSA sound/pci/hda/patch_sigmatel.c:3103 stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)
>[   15.892629] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>[   15.892860] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>[   16.039914] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
>[   16.085318] usb 2-2: usbfs: process 603 (usb_modeswitch) did not claim interface 0 before use
>[   16.086217] usb 2-2: USB disconnect, device number 4
>[   16.097880] input: CNF8243 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input9
>[   16.098023] usbcore: registered new interface driver uvcvideo
>[   16.098025] USB Video Class driver (1.1.1)
>[   16.322286] cfg80211: World regulatory domain updated:
>[   16.322291] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   16.322294] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   16.322297] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   16.322300] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   16.322302] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   16.322305] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   17.913282] cfg80211: Calling CRDA for country: MX
>[   17.916265] cfg80211: Regulatory domain changed to country: MX
>[   17.916268] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   17.916271] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[   17.916273] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[   17.916275] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[   17.916277] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[   18.030141] Adding 5177340k swap on /dev/mapper/VolGroup-lv_swap.  Priority:0 extents:1 across:5177340k 
>[   18.358074] usb 2-2: new high-speed USB device number 5 using ehci_hcd
>[   18.475308] usb 2-2: New USB device found, idVendor=12d1, idProduct=1c23
>[   18.475313] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[   18.475317] usb 2-2: Product: HUAWEI Mobile
>[   18.475320] usb 2-2: Manufacturer: HUAWEI
>[   18.476940] scsi8 : usb-storage 2-2:1.4
>[   19.353586] usbcore: registered new interface driver option
>[   19.353604] USB Serial support registered for GSM modem (1-port)
>[   19.481092] scsi 8:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[   19.482120] sd 8:0:0:0: Attached scsi generic sg3 type 0
>[   19.484189] sd 8:0:0:0: [sdc] Attached SCSI removable disk
>[   19.570571] option 2-2:1.0: GSM modem (1-port) converter detected
>[   19.570793] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
>[   19.570842] option 2-2:1.1: GSM modem (1-port) converter detected
>[   19.570928] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
>[   19.570974] option 2-2:1.2: GSM modem (1-port) converter detected
>[   19.571100] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
>[   19.571151] option 2-2:1.3: GSM modem (1-port) converter detected
>[   19.571271] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
>[   23.778532] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[   24.084814] SELinux: initialized (dev sda1, type ext4), uses xattr
>[   24.779251] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
>[   24.779263] SELinux: initialized (dev dm-2, type ext4), uses xattr
>[   28.529259] type=1400 audit(1355199290.286:3): avc:  denied  { read } for  pid=788 comm="systemd-tmpfile" name="lock" dev="dm-0" ino=4646 scontext=system_u:system_r:systemd_tmpfiles_t:s0 tcontext=system_u:object_r:var_t:s0 tclass=lnk_file
>[   29.175657] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   29.175661] Bluetooth: BNEP filters: protocol multicast
>[   29.269369] Bluetooth: RFCOMM TTY layer initialized
>[   29.269376] Bluetooth: RFCOMM socket layer initialized
>[   29.269378] Bluetooth: RFCOMM ver 1.11
>[   29.382283] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   29.384687] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   30.174421] Loading iSCSI transport class v2.0-870.
>[   30.611549] iscsi: registered transport (tcp)
>[   30.620531] iscsi: registered transport (iser)
>[   30.623796] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
>[   30.623800] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
>[   30.628346] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
>[   30.628383] iscsi: registered transport (cxgb3i)
>[   30.633201] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
>[   30.633236] iscsi: registered transport (cxgb4i)
>[   30.636958] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
>[   30.637993] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
>[   30.638055] iscsi: registered transport (bnx2i)
>[   30.642651] iscsi: registered transport (be2iscsi)
>[   31.913581] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[   31.916779] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[   32.038862] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[   32.041919] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[   32.091954] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   32.125290] sky2 0000:30:00.0: eth0: enabling interface
>[   32.128473] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   35.700916] wlan0: authenticate with b8:a3:86:bc:24:2a
>[   35.703221] wlan0: send auth to b8:a3:86:bc:24:2a (try 1/3)
>[   35.709297] wlan0: authenticated
>[   35.710054] wlan0: associate with b8:a3:86:bc:24:2a (try 1/3)
>[   35.719747] wlan0: RX AssocResp from b8:a3:86:bc:24:2a (capab=0x411 status=0 aid=1)
>[   35.725788] wlan0: associated
>[   35.725847] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[   35.725961] cfg80211: Calling CRDA for country: US
>[   35.741521] cfg80211: Regulatory domain changed to country: US
>[   35.741529] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   35.741535] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[   35.741541] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[   35.741547] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   35.741552] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   35.741557] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   35.741562] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[   54.031631] fuse init (API version 7.20)
>[   54.049364] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>[   54.173532] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[   61.677976] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>[  101.100520] EXT4-fs (sdb1): warning: mounting fs with errors, running e2fsck is recommended
>[  101.304166] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
>[  101.304183] SELinux: initialized (dev sdb1, type ext4), uses xattr
>[  263.056067] usb 2-2: USB disconnect, device number 5
>[  263.056818] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[  263.056856] option 2-2:1.0: device disconnected
>[  263.057380] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[  263.057415] option 2-2:1.1: device disconnected
>[  263.059059] option1 ttyUSB2: option_instat_callback: error -108
>[  263.059282] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[  263.059317] option 2-2:1.2: device disconnected
>[  263.061030] option1 ttyUSB3: option_instat_callback: error -108
>[  263.061255] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[  263.061292] option 2-2:1.3: device disconnected
>[  270.192077] usb 2-2: new high-speed USB device number 6 using ehci_hcd
>[  270.547830] usb 2-2: New USB device found, idVendor=12d1, idProduct=1c24
>[  270.547838] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[  270.547843] usb 2-2: Product: HUAWEI Mobile
>[  270.547847] usb 2-2: Manufacturer: HUAWEI
>[  270.551265] scsi9 : usb-storage 2-2:1.0
>[  270.551520] scsi10 : usb-storage 2-2:1.1
>[  270.763499] usb 2-2: usbfs: process 2358 (usb_modeswitch) did not claim interface 0 before use
>[  270.764077] usb 2-2: USB disconnect, device number 6
>[  273.243082] usb 2-2: new high-speed USB device number 7 using ehci_hcd
>[  273.359004] usb 2-2: New USB device found, idVendor=12d1, idProduct=1c23
>[  273.359039] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[  273.359050] usb 2-2: Product: HUAWEI Mobile
>[  273.359056] usb 2-2: Manufacturer: HUAWEI
>[  273.360583] option 2-2:1.0: GSM modem (1-port) converter detected
>[  273.360905] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
>[  273.361212] option 2-2:1.1: GSM modem (1-port) converter detected
>[  273.361531] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
>[  273.361800] option 2-2:1.2: GSM modem (1-port) converter detected
>[  273.362159] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
>[  273.362455] option 2-2:1.3: GSM modem (1-port) converter detected
>[  273.362756] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
>[  273.363695] scsi11 : usb-storage 2-2:1.4
>[  274.365059] scsi 11:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[  274.366957] sd 11:0:0:0: Attached scsi generic sg3 type 0
>[  274.369646] sd 11:0:0:0: [sdc] Attached SCSI removable disk
>[  329.611661] usb 2-2: USB disconnect, device number 7
>[  329.612658] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[  329.612699] option 2-2:1.0: device disconnected
>[  329.613274] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[  329.613309] option 2-2:1.1: device disconnected
>[  329.615046] option1 ttyUSB2: option_instat_callback: error -108
>[  329.615514] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[  329.615549] option 2-2:1.2: device disconnected
>[  329.617030] option1 ttyUSB3: option_instat_callback: error -108
>[  329.617498] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[  329.617535] option 2-2:1.3: device disconnected
>[  353.642717] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[  402.400064] EXT4-fs (sdb1): error count: 1
>[  402.400069] EXT4-fs (sdb1): initial error at 1348664344: __ext4_get_inode_loc:3561: inode 1049: block 334
>[  402.400074] EXT4-fs (sdb1): last error at 1348664344: __ext4_get_inode_loc:3561: inode 1049: block 334
>[ 1176.983064] usb 2-2: new high-speed USB device number 8 using ehci_hcd
>[ 1177.339944] usb 2-2: New USB device found, idVendor=12d1, idProduct=1c24
>[ 1177.339948] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[ 1177.339957] usb 2-2: Product: HUAWEI Mobile
>[ 1177.339959] usb 2-2: Manufacturer: HUAWEI
>[ 1177.342677] scsi12 : usb-storage 2-2:1.0
>[ 1177.342934] scsi13 : usb-storage 2-2:1.1
>[ 1177.758989] usb 2-2: usbfs: process 3048 (usb_modeswitch) did not claim interface 0 before use
>[ 1177.759487] usb 2-2: USB disconnect, device number 8
>[ 1180.165059] usb 2-2: new high-speed USB device number 9 using ehci_hcd
>[ 1180.280335] usb 2-2: New USB device found, idVendor=12d1, idProduct=1c23
>[ 1180.280341] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[ 1180.280345] usb 2-2: Product: HUAWEI Mobile
>[ 1180.280348] usb 2-2: Manufacturer: HUAWEI
>[ 1180.281536] option 2-2:1.0: GSM modem (1-port) converter detected
>[ 1180.281820] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
>[ 1180.281962] option 2-2:1.1: GSM modem (1-port) converter detected
>[ 1180.282097] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
>[ 1180.282229] option 2-2:1.2: GSM modem (1-port) converter detected
>[ 1180.282385] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
>[ 1180.282535] option 2-2:1.3: GSM modem (1-port) converter detected
>[ 1180.282700] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
>[ 1180.282941] scsi14 : usb-storage 2-2:1.4
>[ 1181.284893] scsi 14:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[ 1181.285987] sd 14:0:0:0: Attached scsi generic sg3 type 0
>[ 1181.287469] sd 14:0:0:0: [sdc] Attached SCSI removable disk
>[ 1289.532195] wlan0: deauthenticating from b8:a3:86:bc:24:2a by local choice (reason=3)
>[ 1289.568080] cfg80211: Calling CRDA to update world regulatory domain
>[ 1289.591017] iwlwifi 0000:10:00.0: RF_KILL bit toggled to disable radio.
>[ 1289.649024] cfg80211: World regulatory domain updated:
>[ 1289.649029] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1289.649032] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1289.649034] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1289.649037] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1289.649039] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1289.649041] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1289.649304] cfg80211: Calling CRDA for country: MX
>[ 1289.651815] cfg80211: Regulatory domain changed to country: MX
>[ 1289.651819] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1289.651821] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 1289.651824] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 1289.651826] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[ 1289.651828] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 1298.573152] usb 2-2: USB disconnect, device number 9
>[ 1298.573732] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[ 1298.573776] option 2-2:1.0: device disconnected
>[ 1298.576309] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[ 1298.576353] option 2-2:1.1: device disconnected
>[ 1298.577774] option1 ttyUSB2: option_instat_callback: error -108
>[ 1298.578052] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[ 1298.578094] option 2-2:1.2: device disconnected
>[ 1298.579542] option1 ttyUSB3: option_instat_callback: error -108
>[ 1298.580824] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[ 1298.580865] option 2-2:1.3: device disconnected
>[ 1306.739081] usb 2-1: new high-speed USB device number 10 using ehci_hcd
>[ 1307.096156] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c24
>[ 1307.096167] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[ 1307.096175] usb 2-1: Product: HUAWEI Mobile
>[ 1307.096181] usb 2-1: Manufacturer: HUAWEI
>[ 1307.098848] scsi15 : usb-storage 2-1:1.0
>[ 1307.099434] scsi16 : usb-storage 2-1:1.1
>[ 1307.359164] usb 2-1: usbfs: process 3256 (usb_modeswitch) did not claim interface 0 before use
>[ 1307.359803] usb 2-1: USB disconnect, device number 10
>[ 1309.791074] usb 2-1: new high-speed USB device number 11 using ehci_hcd
>[ 1309.906505] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c23
>[ 1309.906511] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[ 1309.906514] usb 2-1: Product: HUAWEI Mobile
>[ 1309.906517] usb 2-1: Manufacturer: HUAWEI
>[ 1309.907616] option 2-1:1.0: GSM modem (1-port) converter detected
>[ 1309.907895] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
>[ 1309.908036] option 2-1:1.1: GSM modem (1-port) converter detected
>[ 1309.908240] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
>[ 1309.908356] option 2-1:1.2: GSM modem (1-port) converter detected
>[ 1309.908495] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
>[ 1309.908617] option 2-1:1.3: GSM modem (1-port) converter detected
>[ 1309.908755] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
>[ 1309.917064] scsi17 : usb-storage 2-1:1.4
>[ 1310.920954] scsi 17:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[ 1310.922994] sd 17:0:0:0: Attached scsi generic sg3 type 0
>[ 1310.925203] sd 17:0:0:0: [sdc] Attached SCSI removable disk
>[ 1602.229864] usb 2-1: USB disconnect, device number 11
>[ 1602.230641] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[ 1602.230685] option 2-1:1.0: device disconnected
>[ 1602.236163] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[ 1602.236214] option 2-1:1.1: device disconnected
>[ 1602.238032] option1 ttyUSB2: option_instat_callback: error -108
>[ 1602.238261] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[ 1602.238301] option 2-1:1.2: device disconnected
>[ 1602.240027] option1 ttyUSB3: option_instat_callback: error -108
>[ 1602.240280] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[ 1602.240320] option 2-1:1.3: device disconnected
>[ 1611.631110] usb 2-1: new high-speed USB device number 12 using ehci_hcd
>[ 1611.987894] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c24
>[ 1611.987905] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[ 1611.987912] usb 2-1: Product: HUAWEI Mobile
>[ 1611.987919] usb 2-1: Manufacturer: HUAWEI
>[ 1611.991422] scsi18 : usb-storage 2-1:1.0
>[ 1611.991893] scsi19 : usb-storage 2-1:1.1
>[ 1612.249922] usb 2-1: usbfs: process 3470 (usb_modeswitch) did not claim interface 0 before use
>[ 1612.250536] usb 2-1: USB disconnect, device number 12
>[ 1614.683090] usb 2-1: new high-speed USB device number 13 using ehci_hcd
>[ 1614.798666] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c23
>[ 1614.798677] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[ 1614.798684] usb 2-1: Product: HUAWEI Mobile
>[ 1614.798690] usb 2-1: Manufacturer: HUAWEI
>[ 1614.800148] option 2-1:1.0: GSM modem (1-port) converter detected
>[ 1614.800811] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
>[ 1614.801120] option 2-1:1.1: GSM modem (1-port) converter detected
>[ 1614.801593] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
>[ 1614.801862] option 2-1:1.2: GSM modem (1-port) converter detected
>[ 1614.802390] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
>[ 1614.802699] option 2-1:1.3: GSM modem (1-port) converter detected
>[ 1614.804056] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
>[ 1614.804931] scsi20 : usb-storage 2-1:1.4
>[ 1615.809233] scsi 20:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[ 1615.811172] sd 20:0:0:0: Attached scsi generic sg3 type 0
>[ 1615.814924] sd 20:0:0:0: [sdc] Attached SCSI removable disk
>[ 1631.174029] iwlwifi 0000:10:00.0: RF_KILL bit toggled to enable radio.
>[ 1631.211788] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[ 1631.214832] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[ 1631.259617] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 1633.054205] usb 2-1: USB disconnect, device number 13
>[ 1633.054524] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[ 1633.054548] option 2-1:1.0: device disconnected
>[ 1633.056653] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[ 1633.056675] option 2-1:1.1: device disconnected
>[ 1633.058021] option1 ttyUSB2: option_instat_callback: error -108
>[ 1633.058155] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[ 1633.058174] option 2-1:1.2: device disconnected
>[ 1633.060022] option1 ttyUSB3: option_instat_callback: error -108
>[ 1633.060504] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[ 1633.060522] option 2-1:1.3: device disconnected
>[ 1634.709121] wlan0: authenticate with b8:a3:86:bc:24:2a
>[ 1634.711310] wlan0: send auth to b8:a3:86:bc:24:2a (try 1/3)
>[ 1634.713227] wlan0: authenticated
>[ 1634.714038] wlan0: associate with b8:a3:86:bc:24:2a (try 1/3)
>[ 1634.718147] wlan0: RX AssocResp from b8:a3:86:bc:24:2a (capab=0x411 status=0 aid=1)
>[ 1634.723751] wlan0: associated
>[ 1634.723814] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 1634.723970] cfg80211: Calling CRDA for country: US
>[ 1634.730165] cfg80211: Regulatory domain changed to country: US
>[ 1634.730173] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1634.730179] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 1634.730185] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 1634.730191] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1634.730196] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1634.730201] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1634.730207] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 2231.592083] usb 2-2: new high-speed USB device number 14 using ehci_hcd
>[ 2231.956291] usb 2-2: New USB device found, idVendor=12d1, idProduct=1c24
>[ 2231.956302] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[ 2231.956310] usb 2-2: Product: HUAWEI Mobile
>[ 2231.956316] usb 2-2: Manufacturer: HUAWEI
>[ 2231.961693] scsi21 : usb-storage 2-2:1.0
>[ 2231.962302] scsi22 : usb-storage 2-2:1.1
>[ 2232.218930] usb 2-2: usbfs: process 3892 (usb_modeswitch) did not claim interface 0 before use
>[ 2232.219563] usb 2-2: USB disconnect, device number 14
>[ 2234.651082] usb 2-2: new high-speed USB device number 15 using ehci_hcd
>[ 2234.766423] usb 2-2: New USB device found, idVendor=12d1, idProduct=1c23
>[ 2234.766428] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[ 2234.766431] usb 2-2: Product: HUAWEI Mobile
>[ 2234.766434] usb 2-2: Manufacturer: HUAWEI
>[ 2234.767517] option 2-2:1.0: GSM modem (1-port) converter detected
>[ 2234.767903] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
>[ 2234.768036] option 2-2:1.1: GSM modem (1-port) converter detected
>[ 2234.768238] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
>[ 2234.768345] option 2-2:1.2: GSM modem (1-port) converter detected
>[ 2234.768559] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
>[ 2234.768679] option 2-2:1.3: GSM modem (1-port) converter detected
>[ 2234.768888] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
>[ 2234.775387] scsi23 : usb-storage 2-2:1.4
>[ 2235.776946] scsi 23:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[ 2235.777960] sd 23:0:0:0: Attached scsi generic sg3 type 0
>[ 2235.779551] sd 23:0:0:0: [sdc] Attached SCSI removable disk
>[ 2252.115197] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 2371.537121] usb 2-2: USB disconnect, device number 15
>[ 2371.537916] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[ 2371.537955] option 2-2:1.0: device disconnected
>[ 2371.538520] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[ 2371.538554] option 2-2:1.1: device disconnected
>[ 2371.540029] option1 ttyUSB2: option_instat_callback: error -108
>[ 2371.540496] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[ 2371.540538] option 2-2:1.2: device disconnected
>[ 2371.542031] option1 ttyUSB3: option_instat_callback: error -108
>[ 2371.542492] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[ 2371.542530] option 2-2:1.3: device disconnected
>[ 2633.110092] usb 4-2: new low-speed USB device number 2 using uhci_hcd
>[ 2633.267130] usb 4-2: New USB device found, idVendor=2188, idProduct=0ae1
>[ 2633.267140] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[ 2633.267147] usb 4-2: Product:  USB OPTICAL MOUSE
>[ 2633.287859] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input10
>[ 2633.288606] hid-generic 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
>[ 2896.637568] wlan0: deauthenticating from b8:a3:86:bc:24:2a by local choice (reason=3)
>[ 2896.665771] cfg80211: Calling CRDA to update world regulatory domain
>[ 2896.679938] cfg80211: World regulatory domain updated:
>[ 2896.679947] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2896.679954] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2896.679960] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2896.679965] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2896.679971] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2896.679976] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2896.680031] cfg80211: Calling CRDA for country: MX
>[ 2896.683414] cfg80211: Regulatory domain changed to country: MX
>[ 2896.683419] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2896.683421] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 2896.683424] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 2896.683426] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[ 2896.683428] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 2896.701414] sky2 0000:30:00.0: eth0: disabling interface
>[ 2898.860338] PM: Syncing filesystems ... done.
>[ 2899.140960] PM: Preparing system for mem sleep
>[ 2899.259149] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 2899.270146] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 2899.281120] PM: Entering mem sleep
>[ 2899.281145] Suspending console(s) (use no_console_suspend to debug)
>[ 2899.281619] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 2899.281775] sd 0:0:0:0: [sda] Stopping disk
>[ 2899.542071] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[ 2899.788124] PM: suspend of devices complete after 506.754 msecs
>[ 2899.788279] PM: late suspend of devices complete after 0.152 msecs
>[ 2899.950163] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[ 2899.961126] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[ 2899.961216] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[ 2899.961303] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[ 2899.961347] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[ 2899.972114] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[ 2899.972166] PM: noirq suspend of devices complete after 183.884 msecs
>[ 2899.972383] ACPI: Preparing to enter system sleep state S3
>[ 2899.972483] PM: Saving platform NVS memory
>[ 2899.972646] Disabling non-boot CPUs ...
>[ 2899.973973] smpboot: CPU 1 is now offline
>[ 2899.974462] CPU 1 offline: Remove Rx thread
>[ 2899.974573] Extended CMOS year: 2000
>[ 2899.974573] ACPI: Low-level resume complete
>[ 2899.974573] PM: Restoring platform NVS memory
>[ 2899.974573] Extended CMOS year: 2000
>[ 2899.974573] CPU0: Thermal monitoring handled by SMI
>[ 2899.974573] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[ 2899.974573] Enabling non-boot CPUs ...
>[ 2899.975168] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 2899.973840] Initializing CPU#1
>[ 2899.973840] CPU1: Thermal monitoring handled by SMI
>[ 2899.987533] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[ 2899.987537] bnx2i: CPU 1 online: Create Rx thread
>[ 2899.988021] CPU1 is up
>[ 2899.989393] ACPI: Waking up from system sleep state S3
>[ 2900.035324] Monitor-Mwait will be used to enter C-3 state
>[ 2900.047291] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[ 2900.058194] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[ 2900.063149] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[ 2900.074616] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[ 2900.074678] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[ 2900.074739] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[ 2900.085191] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[ 2900.258423] PM: noirq resume of devices complete after 222.115 msecs
>[ 2900.258546] PM: early resume of devices complete after 0.084 msecs
>[ 2900.258573] i915 0000:00:02.0: setting latency timer to 64
>[ 2900.259011] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[ 2900.259105] usb usb3: root hub lost power or was reset
>[ 2900.260209] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[ 2900.263252] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[ 2900.263366] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 2900.263395] usb usb4: root hub lost power or was reset
>[ 2900.263410] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 2900.263439] usb usb5: root hub lost power or was reset
>[ 2900.263456] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 2900.263485] usb usb6: root hub lost power or was reset
>[ 2900.263503] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 2900.263528] pci 0000:00:1e.0: setting latency timer to 64
>[ 2900.263541] ata_piix 0000:00:1f.1: setting latency timer to 64
>[ 2900.263553] ahci 0000:00:1f.2: setting latency timer to 64
>[ 2900.319118] ata5: port disabled--ignoring
>[ 2900.598065] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[ 2900.623068] ata2: SATA link down (SStatus 0 SControl 300)
>[ 2900.624084] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 2900.632535] ata3.00: configured for UDMA/100
>[ 2900.734000] btusb 3-1:1.0: no reset_resume for driver btusb?
>[ 2900.734011] btusb 3-1:1.1: no reset_resume for driver btusb?
>[ 2900.825077] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[ 2901.191085] usb 4-2: reset low-speed USB device number 2 using uhci_hcd
>[ 2902.255086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[ 2902.257700] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[ 2902.257703] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[ 2902.262541] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[ 2902.262546] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[ 2902.266829] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[ 2902.266832] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[ 2902.267100] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[ 2902.267104] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[ 2902.268429] ata1.00: configured for UDMA/100
>[ 2902.268481] sd 0:0:0:0: [sda] Starting disk
>[ 2902.444576] PM: resume of devices complete after 2186.027 msecs
>[ 2902.445109] PM: Finishing wakeup.
>[ 2902.445111] Restarting tasks ... done.
>[ 2902.478769] video LNXVIDEO:00: Restoring backlight state
>[ 2902.615957] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[ 2902.620167] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[ 2902.664426] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 2902.678994] sky2 0000:30:00.0: eth0: enabling interface
>[ 2902.684961] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[ 2906.136431] wlan0: authenticate with b8:a3:86:bc:24:2a
>[ 2906.138662] wlan0: send auth to b8:a3:86:bc:24:2a (try 1/3)
>[ 2906.146787] wlan0: authenticated
>[ 2906.148057] wlan0: associate with b8:a3:86:bc:24:2a (try 1/3)
>[ 2906.152201] wlan0: RX AssocResp from b8:a3:86:bc:24:2a (capab=0x411 status=0 aid=1)
>[ 2906.156831] wlan0: associated
>[ 2906.156891] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 2906.157068] cfg80211: Calling CRDA for country: US
>[ 2906.165384] cfg80211: Regulatory domain changed to country: US
>[ 2906.165389] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2906.165391] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 2906.165394] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 2906.165396] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2906.165398] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2906.165400] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2906.165402] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 2906.902287] sd 5:0:0:0: [sdb] No Caching mode page present
>[ 2906.902309] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[ 3635.780722] CE: hpet increased min_delta_ns to 20113 nsec
>[ 4215.977510] wlan0: deauthenticating from b8:a3:86:bc:24:2a by local choice (reason=3)
>[ 4216.003275] cfg80211: Calling CRDA to update world regulatory domain
>[ 4216.032451] sky2 0000:30:00.0: eth0: disabling interface
>[ 4216.046124] cfg80211: World regulatory domain updated:
>[ 4216.046129] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 4216.046131] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4216.046134] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 4216.046136] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 4216.046138] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4216.046145] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4216.046167] cfg80211: Calling CRDA for country: MX
>[ 4216.056617] cfg80211: Regulatory domain changed to country: MX
>[ 4216.056621] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 4216.056624] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 4216.056626] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 4216.056628] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[ 4216.056631] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 4217.765310] PM: Syncing filesystems ... done.
>[ 4218.092670] PM: Preparing system for mem sleep
>[ 4218.193554] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 4218.205171] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 4218.216161] PM: Entering mem sleep
>[ 4218.216196] Suspending console(s) (use no_console_suspend to debug)
>[ 4218.216670] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 4218.275032] sd 0:0:0:0: [sda] Stopping disk
>[ 4218.480698] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[ 4218.775104] PM: suspend of devices complete after 558.685 msecs
>[ 4218.775286] PM: late suspend of devices complete after 0.178 msecs
>[ 4218.937160] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[ 4218.948122] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[ 4218.948211] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[ 4218.948300] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[ 4218.948537] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[ 4218.959113] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[ 4218.959165] PM: noirq suspend of devices complete after 183.876 msecs
>[ 4218.959385] ACPI: Preparing to enter system sleep state S3
>[ 4218.959486] PM: Saving platform NVS memory
>[ 4218.959603] Disabling non-boot CPUs ...
>[ 4218.960954] smpboot: CPU 1 is now offline
>[ 4218.961401] CPU 1 offline: Remove Rx thread
>[ 4218.961508] Extended CMOS year: 2000
>[ 4218.961508] ACPI: Low-level resume complete
>[ 4218.961508] PM: Restoring platform NVS memory
>[ 4218.961508] Extended CMOS year: 2000
>[ 4218.961508] CPU0: Thermal monitoring handled by SMI
>[ 4218.961508] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[ 4218.961508] Enabling non-boot CPUs ...
>[ 4218.962060] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 4218.960824] Initializing CPU#1
>[ 4218.960824] CPU1: Thermal monitoring handled by SMI
>[ 4218.974420] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[ 4218.974424] bnx2i: CPU 1 online: Create Rx thread
>[ 4218.975020] CPU1 is up
>[ 4218.976371] ACPI: Waking up from system sleep state S3
>[ 4219.032140] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[ 4219.043080] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[ 4219.048035] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[ 4219.059488] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[ 4219.059554] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[ 4219.059620] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[ 4219.070079] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[ 4219.243310] PM: noirq resume of devices complete after 222.086 msecs
>[ 4219.243430] PM: early resume of devices complete after 0.085 msecs
>[ 4219.243511] i915 0000:00:02.0: setting latency timer to 64
>[ 4219.243516] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[ 4219.244031] usb usb3: root hub lost power or was reset
>[ 4219.245560] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[ 4219.248188] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 4219.248218] usb usb4: root hub lost power or was reset
>[ 4219.248235] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 4219.248264] usb usb5: root hub lost power or was reset
>[ 4219.248280] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 4219.248309] usb usb6: root hub lost power or was reset
>[ 4219.248327] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 4219.248352] pci 0000:00:1e.0: setting latency timer to 64
>[ 4219.248365] ata_piix 0000:00:1f.1: setting latency timer to 64
>[ 4219.248377] ahci 0000:00:1f.2: setting latency timer to 64
>[ 4219.248539] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[ 4219.340363] ata5: port disabled--ignoring
>[ 4219.492061] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[ 4219.643077] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 4219.643102] ata2: SATA link down (SStatus 0 SControl 300)
>[ 4219.651839] ata3.00: configured for UDMA/100
>[ 4219.858081] usb 4-2: reset low-speed USB device number 2 using uhci_hcd
>[ 4220.241078] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[ 4220.375953] btusb 3-1:1.0: no reset_resume for driver btusb?
>[ 4220.375955] btusb 3-1:1.1: no reset_resume for driver btusb?
>[ 4221.224094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[ 4221.226508] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[ 4221.226510] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[ 4221.234997] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[ 4221.234999] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[ 4221.238983] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[ 4221.238986] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[ 4221.239252] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[ 4221.239256] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[ 4221.240601] ata1.00: configured for UDMA/100
>[ 4221.240650] sd 0:0:0:0: [sda] Starting disk
>[ 4221.420469] PM: resume of devices complete after 2177.035 msecs
>[ 4221.420992] PM: Finishing wakeup.
>[ 4221.420993] Restarting tasks ... done.
>[ 4221.440255] video LNXVIDEO:00: Restoring backlight state
>[ 4221.674541] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[ 4221.677801] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[ 4221.726340] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 4221.735430] sky2 0000:30:00.0: eth0: enabling interface
>[ 4221.736247] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[ 4225.229340] wlan0: authenticate with b8:a3:86:bc:24:2a
>[ 4225.231144] wlan0: send auth to b8:a3:86:bc:24:2a (try 1/3)
>[ 4225.232986] wlan0: authenticated
>[ 4225.234020] wlan0: associate with b8:a3:86:bc:24:2a (try 1/3)
>[ 4225.238079] wlan0: RX AssocResp from b8:a3:86:bc:24:2a (capab=0x411 status=0 aid=1)
>[ 4225.242692] wlan0: associated
>[ 4225.242727] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 4225.242803] cfg80211: Calling CRDA for country: US
>[ 4225.247613] cfg80211: Regulatory domain changed to country: US
>[ 4225.247617] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 4225.247619] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 4225.247621] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 4225.247623] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4225.247625] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4225.247627] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4225.247629] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 4225.814363] sd 5:0:0:0: [sdb] No Caching mode page present
>[ 4225.814374] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[ 7298.564405] midori[4942]: segfault at 6566667f ip a0a019fe sp bfa05ca0 error 4 in libflashplayer.so[a04c6000+1014000]
>[12627.727743] midori[7299]: segfault at 64b0b6a7 ip ae08f440 sp bfbbb9fc error 6
>[15058.606849] midori[7875]: segfault at 64697c ip a1b1d9fe sp bfc28430 error 4 in libflashplayer.so[a15e2000+1014000]
>[15062.264893] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[19025.287563] midori[8228]: segfault at 70697a73 ip a0fa59fe sp bf8e8060 error 4 in libflashplayer.so[a0a6a000+1014000]
>[19059.474581] midori[9078]: segfault at 87e0459d ip ae92ec44 sp bf8e8e5c error 6
>[21999.902758] wlan0: deauthenticating from b8:a3:86:bc:24:2a by local choice (reason=3)
>[21999.939149] cfg80211: Calling CRDA to update world regulatory domain
>[21999.972052] sky2 0000:30:00.0: eth0: disabling interface
>[22000.001312] cfg80211: World regulatory domain updated:
>[22000.001317] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[22000.001319] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[22000.001322] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[22000.001324] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[22000.001326] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[22000.001328] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[22000.001340] cfg80211: Calling CRDA for country: MX
>[22000.006298] cfg80211: Regulatory domain changed to country: MX
>[22000.006302] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[22000.006304] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[22000.006307] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[22000.006309] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[22000.006311] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[22002.181586] PM: Syncing filesystems ... done.
>[22002.502753] PM: Preparing system for mem sleep
>[22002.638148] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[22002.649253] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[22002.660234] PM: Entering mem sleep
>[22002.660265] Suspending console(s) (use no_console_suspend to debug)
>[22002.660753] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[22002.699010] sd 0:0:0:0: [sda] Stopping disk
>[22003.927589] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[22003.927654] PM: suspend of devices complete after 1267.151 msecs
>[22003.927851] PM: late suspend of devices complete after 0.193 msecs
>[22004.090174] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[22004.101118] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[22004.101207] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[22004.101295] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[22004.101528] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[22004.112115] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[22004.112166] PM: noirq suspend of devices complete after 184.312 msecs
>[22004.112383] ACPI: Preparing to enter system sleep state S3
>[22004.112481] PM: Saving platform NVS memory
>[22004.112613] Disabling non-boot CPUs ...
>[22004.113955] smpboot: CPU 1 is now offline
>[22004.114457] CPU 1 offline: Remove Rx thread
>[22004.114562] Extended CMOS year: 2000
>[22004.114562] ACPI: Low-level resume complete
>[22004.114562] PM: Restoring platform NVS memory
>[22004.114562] Extended CMOS year: 2000
>[22004.114562] CPU0: Thermal monitoring handled by SMI
>[22004.114562] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[22004.114562] Enabling non-boot CPUs ...
>[22004.115118] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[22004.113824] Initializing CPU#1
>[22004.113824] CPU1: Thermal monitoring handled by SMI
>[22004.127478] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[22004.127483] bnx2i: CPU 1 online: Create Rx thread
>[22004.128024] CPU1 is up
>[22004.129391] ACPI: Waking up from system sleep state S3
>[22004.190137] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[22004.201080] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[22004.207034] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[22004.218479] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[22004.218542] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[22004.218605] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[22004.229077] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[22004.402310] PM: noirq resume of devices complete after 223.173 msecs
>[22004.402429] PM: early resume of devices complete after 0.083 msecs
>[22004.402509] i915 0000:00:02.0: setting latency timer to 64
>[22004.402514] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[22004.403030] usb usb3: root hub lost power or was reset
>[22004.403867] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[22004.407185] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[22004.407287] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[22004.407316] usb usb4: root hub lost power or was reset
>[22004.407333] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[22004.407362] usb usb5: root hub lost power or was reset
>[22004.407377] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[22004.407406] usb usb6: root hub lost power or was reset
>[22004.407424] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[22004.407449] pci 0000:00:1e.0: setting latency timer to 64
>[22004.407462] ata_piix 0000:00:1f.1: setting latency timer to 64
>[22004.407475] ahci 0000:00:1f.2: setting latency timer to 64
>[22004.471653] ata5: port disabled--ignoring
>[22004.742075] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[22004.772081] ata2: SATA link down (SStatus 0 SControl 300)
>[22004.774086] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[22004.782538] ata3.00: configured for UDMA/100
>[22004.876942] btusb 3-1:1.0: no reset_resume for driver btusb?
>[22004.876945] btusb 3-1:1.1: no reset_resume for driver btusb?
>[22004.967079] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[22006.355135] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[22006.357567] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[22006.357570] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[22006.366998] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[22006.367002] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[22006.371024] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[22006.371026] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[22006.371293] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[22006.371297] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[22006.372641] ata1.00: configured for UDMA/100
>[22006.372704] sd 0:0:0:0: [sda] Starting disk
>[22006.374474] Extended CMOS year: 2000
>[22006.556624] PM: resume of devices complete after 2154.191 msecs
>[22006.557224] PM: Finishing wakeup.
>[22006.557581] usb 4-2: USB disconnect, device number 2
>[22006.557225] Restarting tasks ... done.
>[22006.578325] video LNXVIDEO:00: Restoring backlight state
>[22006.716657] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[22006.719765] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[22006.770925] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[22006.776240] sky2 0000:30:00.0: eth0: enabling interface
>[22006.778880] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[22010.304502] wlan0: authenticate with b8:a3:86:bc:24:2a
>[22010.316156] wlan0: send auth to b8:a3:86:bc:24:2a (try 1/3)
>[22010.318084] wlan0: authenticated
>[22010.319052] wlan0: associate with b8:a3:86:bc:24:2a (try 1/3)
>[22010.323127] wlan0: RX AssocResp from b8:a3:86:bc:24:2a (capab=0x411 status=0 aid=1)
>[22010.327435] wlan0: associated
>[22010.327480] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[22010.327554] cfg80211: Calling CRDA for country: US
>[22010.338620] cfg80211: Regulatory domain changed to country: US
>[22010.338624] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[22010.338627] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[22010.338629] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[22010.338632] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[22010.338634] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[22010.338636] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[22010.338638] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[22010.646241] sd 5:0:0:0: [sdb] No Caching mode page present
>[22010.646253] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[22025.012087] usb 4-2: new low-speed USB device number 3 using uhci_hcd
>[22025.171114] usb 4-2: New USB device found, idVendor=2188, idProduct=0ae1
>[22025.171125] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[22025.171133] usb 4-2: Product:  USB OPTICAL MOUSE
>[22025.190941] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input11
>[22025.191723] hid-generic 0003:2188:0AE1.0002: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
>[27424.500109] usb 4-2: USB disconnect, device number 3
>[28172.342117] usb 4-2: new low-speed USB device number 4 using uhci_hcd
>[28172.501138] usb 4-2: New USB device found, idVendor=2188, idProduct=0ae1
>[28172.501149] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[28172.501157] usb 4-2: Product:  USB OPTICAL MOUSE
>[28172.521822] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input12
>[28172.522648] hid-generic 0003:2188:0AE1.0003: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
>[28941.250123] usb 4-2: USB disconnect, device number 4
>[28952.628077] usb 2-2: new high-speed USB device number 19 using ehci_hcd
>[28952.991265] usb 2-2: New USB device found, idVendor=12d1, idProduct=1c24
>[28952.991276] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[28952.991284] usb 2-2: Product: HUAWEI Mobile
>[28952.991290] usb 2-2: Manufacturer: HUAWEI
>[28952.994638] scsi24 : usb-storage 2-2:1.0
>[28952.995333] scsi25 : usb-storage 2-2:1.1
>[28953.266663] usb 2-2: usbfs: process 11835 (usb_modeswitch) did not claim interface 0 before use
>[28953.267748] usb 2-2: USB disconnect, device number 19
>[28955.716074] usb 2-2: new high-speed USB device number 20 using ehci_hcd
>[28955.831671] usb 2-2: New USB device found, idVendor=12d1, idProduct=1c23
>[28955.831681] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[28955.831688] usb 2-2: Product: HUAWEI Mobile
>[28955.831699] usb 2-2: Manufacturer: HUAWEI
>[28955.833251] option 2-2:1.0: GSM modem (1-port) converter detected
>[28955.833681] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
>[28955.833952] option 2-2:1.1: GSM modem (1-port) converter detected
>[28955.834195] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
>[28955.834445] option 2-2:1.2: GSM modem (1-port) converter detected
>[28955.834725] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
>[28955.835036] option 2-2:1.3: GSM modem (1-port) converter detected
>[28955.835341] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
>[28955.837156] scsi26 : usb-storage 2-2:1.4
>[28956.840946] scsi 26:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[28956.842001] sd 26:0:0:0: Attached scsi generic sg3 type 0
>[28956.844072] sd 26:0:0:0: [sdc] Attached SCSI removable disk
>[28993.485067] usb 4-1: new low-speed USB device number 5 using uhci_hcd
>[28993.642141] usb 4-1: New USB device found, idVendor=2188, idProduct=0ae1
>[28993.642150] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[28993.642157] usb 4-1: Product:  USB OPTICAL MOUSE
>[28993.661502] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input13
>[28993.662478] hid-generic 0003:2188:0AE1.0004: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
>[31992.250078] usb 4-1: USB disconnect, device number 5
>[31993.263111] usb 2-2: USB disconnect, device number 20
>[31993.263393] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[31993.263411] option 2-2:1.0: device disconnected
>[31993.263541] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[31993.263555] option 2-2:1.1: device disconnected
>[31993.265021] option1 ttyUSB2: option_instat_callback: error -108
>[31993.265144] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[31993.265160] option 2-2:1.2: device disconnected
>[31993.267017] option1 ttyUSB3: option_instat_callback: error -108
>[31993.267139] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[31993.267157] option 2-2:1.3: device disconnected
>[32002.491037] usb 2-1: new high-speed USB device number 22 using ehci_hcd
>[32002.847073] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c24
>[32002.847084] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[32002.847091] usb 2-1: Product: HUAWEI Mobile
>[32002.847098] usb 2-1: Manufacturer: HUAWEI
>[32002.850908] scsi27 : usb-storage 2-1:1.0
>[32002.851491] scsi28 : usb-storage 2-1:1.1
>[32003.109485] usb 2-1: usbfs: process 14281 (usb_modeswitch) did not claim interface 0 before use
>[32003.110120] usb 2-1: USB disconnect, device number 22
>[32005.542076] usb 2-1: new high-speed USB device number 23 using ehci_hcd
>[32005.657726] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c23
>[32005.657737] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[32005.657744] usb 2-1: Product: HUAWEI Mobile
>[32005.657750] usb 2-1: Manufacturer: HUAWEI
>[32005.659218] option 2-1:1.0: GSM modem (1-port) converter detected
>[32005.659556] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
>[32005.659835] option 2-1:1.1: GSM modem (1-port) converter detected
>[32005.660590] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
>[32005.660866] option 2-1:1.2: GSM modem (1-port) converter detected
>[32005.661407] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
>[32005.661713] option 2-1:1.3: GSM modem (1-port) converter detected
>[32005.662285] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
>[32005.663045] scsi29 : usb-storage 2-1:1.4
>[32006.665188] scsi 29:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[32006.667508] sd 29:0:0:0: Attached scsi generic sg3 type 0
>[32006.669871] sd 29:0:0:0: [sdc] Attached SCSI removable disk
>[32488.761366] wlan0: deauthenticating from b8:a3:86:bc:24:2a by local choice (reason=3)
>[32488.812265] cfg80211: Calling CRDA to update world regulatory domain
>[32488.834389] sky2 0000:30:00.0: eth0: disabling interface
>[32488.861560] cfg80211: World regulatory domain updated:
>[32488.861564] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[32488.861567] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32488.861570] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[32488.861572] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[32488.861574] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32488.861576] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32488.861586] cfg80211: Calling CRDA for country: MX
>[32488.864767] cfg80211: Regulatory domain changed to country: MX
>[32488.864771] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[32488.864774] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[32488.864776] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[32488.864778] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[32488.864780] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[32488.957472] usb 2-1: USB disconnect, device number 23
>[32488.957800] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[32488.957820] option 2-1:1.0: device disconnected
>[32488.958138] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[32488.958152] option 2-1:1.1: device disconnected
>[32488.960019] option1 ttyUSB2: option_instat_callback: error -108
>[32488.960273] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[32488.960290] option 2-1:1.2: device disconnected
>[32488.962023] option1 ttyUSB3: option_instat_callback: error -108
>[32488.962306] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[32488.962325] option 2-1:1.3: device disconnected
>[32490.416540] PM: Syncing filesystems ... done.
>[32490.426426] PM: Preparing system for mem sleep
>[32490.545403] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[32490.556158] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[32490.567163] PM: Entering mem sleep
>[32490.567200] Suspending console(s) (use no_console_suspend to debug)
>[32490.567628] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[32490.677605] sd 0:0:0:0: [sda] Stopping disk
>[32490.831525] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[32491.181105] PM: suspend of devices complete after 613.675 msecs
>[32491.181262] PM: late suspend of devices complete after 0.153 msecs
>[32491.343161] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[32491.354124] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[32491.354215] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[32491.354304] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[32491.354537] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[32491.365115] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[32491.365166] PM: noirq suspend of devices complete after 183.901 msecs
>[32491.365385] ACPI: Preparing to enter system sleep state S3
>[32491.365486] PM: Saving platform NVS memory
>[32491.365612] Disabling non-boot CPUs ...
>[32491.366963] smpboot: CPU 1 is now offline
>[32491.367467] CPU 1 offline: Remove Rx thread
>[32491.367595] Extended CMOS year: 2000
>[32491.367595] ACPI: Low-level resume complete
>[32491.367595] PM: Restoring platform NVS memory
>[32491.367595] Extended CMOS year: 2000
>[32491.367595] CPU0: Thermal monitoring handled by SMI
>[32491.367595] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[32491.368037] Enabling non-boot CPUs ...
>[32491.368209] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[32491.366835] Initializing CPU#1
>[32491.366835] CPU1: Thermal monitoring handled by SMI
>[32491.380568] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[32491.380573] bnx2i: CPU 1 online: Create Rx thread
>[32491.381020] CPU1 is up
>[32491.382404] ACPI: Waking up from system sleep state S3
>[32491.443138] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[32491.454080] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[32491.459034] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[32491.470483] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[32491.470546] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[32491.470609] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[32491.481079] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[32491.654307] PM: noirq resume of devices complete after 222.170 msecs
>[32491.654424] PM: early resume of devices complete after 0.082 msecs
>[32491.654500] i915 0000:00:02.0: setting latency timer to 64
>[32491.654506] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[32491.655486] usb usb3: root hub lost power or was reset
>[32491.656734] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[32491.659188] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[32491.659218] usb usb4: root hub lost power or was reset
>[32491.659235] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[32491.659263] usb usb5: root hub lost power or was reset
>[32491.659280] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[32491.659308] usb usb6: root hub lost power or was reset
>[32491.659326] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[32491.659351] pci 0000:00:1e.0: setting latency timer to 64
>[32491.659364] ata_piix 0000:00:1f.1: setting latency timer to 64
>[32491.659376] ahci 0000:00:1f.2: setting latency timer to 64
>[32491.659539] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[32491.723241] ata5: port disabled--ignoring
>[32491.882051] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[32492.026074] ata2: SATA link down (SStatus 0 SControl 300)
>[32492.026101] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[32492.034543] ata3.00: configured for UDMA/100
>[32492.098078] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[32492.232917] btusb 3-1:1.0: no reset_resume for driver btusb?
>[32492.232919] btusb 3-1:1.1: no reset_resume for driver btusb?
>[32493.607082] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[32493.609429] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[32493.609432] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[32493.617180] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[32493.617183] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[32493.621132] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[32493.621135] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[32493.621409] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[32493.621412] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[32493.622758] ata1.00: configured for UDMA/100
>[32493.622809] sd 0:0:0:0: [sda] Starting disk
>[32493.796502] PM: resume of devices complete after 2142.074 msecs
>[32493.797052] PM: Finishing wakeup.
>[32493.797053] Restarting tasks ... done.
>[32493.837171] video LNXVIDEO:00: Restoring backlight state
>[32493.969219] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[32493.972287] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[32494.016646] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[32494.023621] sky2 0000:30:00.0: eth0: enabling interface
>[32494.023788] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[32494.211039] usb 4-2: new low-speed USB device number 6 using uhci_hcd
>[32494.371056] usb 4-2: New USB device found, idVendor=2188, idProduct=0ae1
>[32494.371061] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[32494.371064] usb 4-2: Product:  USB OPTICAL MOUSE
>[32494.390799] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input14
>[32494.394781] hid-generic 0003:2188:0AE1.0005: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
>[32497.525292] wlan0: authenticate with b8:a3:86:bc:24:2a
>[32497.527376] wlan0: send auth to b8:a3:86:bc:24:2a (try 1/3)
>[32497.529339] wlan0: authenticated
>[32497.530060] wlan0: associate with b8:a3:86:bc:24:2a (try 1/3)
>[32497.534172] wlan0: RX AssocResp from b8:a3:86:bc:24:2a (capab=0x411 status=0 aid=1)
>[32497.539121] wlan0: associated
>[32497.539178] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[32497.539354] cfg80211: Calling CRDA for country: US
>[32497.548091] cfg80211: Regulatory domain changed to country: US
>[32497.548100] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[32497.548106] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[32497.548112] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[32497.548117] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32497.548123] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32497.548128] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32497.548133] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[32497.942430] sd 5:0:0:0: [sdb] No Caching mode page present
>[32497.942435] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[33883.165102] wlan0: deauthenticating from b8:a3:86:bc:24:2a by local choice (reason=3)
>[33883.195139] cfg80211: Calling CRDA to update world regulatory domain
>[33883.199468] cfg80211: World regulatory domain updated:
>[33883.199472] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[33883.199475] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33883.199477] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[33883.199480] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[33883.199482] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33883.199484] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33883.199500] cfg80211: Calling CRDA for country: MX
>[33883.210659] sky2 0000:30:00.0: eth0: disabling interface
>[33883.223245] cfg80211: Regulatory domain changed to country: MX
>[33883.223249] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[33883.223252] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[33883.223254] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[33883.223257] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[33883.223259] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[33884.867496] PM: Syncing filesystems ... done.
>[33884.877846] PM: Preparing system for mem sleep
>[33885.029137] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[33885.040159] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[33885.051082] PM: Entering mem sleep
>[33885.051106] Suspending console(s) (use no_console_suspend to debug)
>[33885.051563] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[33885.051728] sd 0:0:0:0: [sda] Stopping disk
>[33885.316371] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[33885.575107] PM: suspend of devices complete after 523.786 msecs
>[33885.575265] PM: late suspend of devices complete after 0.155 msecs
>[33885.737161] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[33885.748121] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[33885.748208] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[33885.748294] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[33885.748530] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[33885.759114] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[33885.759166] PM: noirq suspend of devices complete after 183.897 msecs
>[33885.759381] ACPI: Preparing to enter system sleep state S3
>[33885.759480] PM: Saving platform NVS memory
>[33885.759609] Disabling non-boot CPUs ...
>[33885.760958] smpboot: CPU 1 is now offline
>[33885.761401] CPU 1 offline: Remove Rx thread
>[33885.761495] Extended CMOS year: 2000
>[33885.761495] ACPI: Low-level resume complete
>[33885.761495] PM: Restoring platform NVS memory
>[33885.761495] Extended CMOS year: 2000
>[33885.761495] CPU0: Thermal monitoring handled by SMI
>[33885.761495] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[33885.761495] Enabling non-boot CPUs ...
>[33885.762048] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[33885.760828] Initializing CPU#1
>[33885.760828] CPU1: Thermal monitoring handled by SMI
>[33885.774411] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[33885.774416] bnx2i: CPU 1 online: Create Rx thread
>[33885.775020] CPU1 is up
>[33885.776389] ACPI: Waking up from system sleep state S3
>[33885.831297] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[33885.842197] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[33885.847147] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[33885.858620] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[33885.858680] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[33885.858739] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[33885.869198] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[33886.042421] PM: noirq resume of devices complete after 222.187 msecs
>[33886.042546] PM: early resume of devices complete after 0.086 msecs
>[33886.042624] i915 0000:00:02.0: setting latency timer to 64
>[33886.042630] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[33886.043104] usb usb3: root hub lost power or was reset
>[33886.043945] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[33886.047282] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[33886.047310] usb usb4: root hub lost power or was reset
>[33886.047327] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[33886.047356] usb usb5: root hub lost power or was reset
>[33886.047373] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[33886.047402] usb usb6: root hub lost power or was reset
>[33886.047420] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[33886.047444] pci 0000:00:1e.0: setting latency timer to 64
>[33886.047457] ata_piix 0000:00:1f.1: setting latency timer to 64
>[33886.047469] ahci 0000:00:1f.2: setting latency timer to 64
>[33886.047631] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[33886.124603] ata5: port disabled--ignoring
>[33886.382066] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[33886.427061] ata2: SATA link down (SStatus 0 SControl 300)
>[33886.427091] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[33886.435541] ata3.00: configured for UDMA/100
>[33886.516987] btusb 3-1:1.0: no reset_resume for driver btusb?
>[33886.516990] btusb 3-1:1.1: no reset_resume for driver btusb?
>[33886.608079] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[33888.007099] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[33888.009512] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[33888.009515] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[33888.017640] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[33888.017645] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[33888.021665] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[33888.021668] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[33888.021934] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[33888.021938] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[33888.023281] ata1.00: configured for UDMA/100
>[33888.023344] sd 0:0:0:0: [sda] Starting disk
>[33888.209648] PM: resume of devices complete after 2167.097 msecs
>[33888.210194] PM: Finishing wakeup.
>[33888.210956] usb 4-2: USB disconnect, device number 6
>[33888.210195] Restarting tasks ... done.
>[33888.236738] video LNXVIDEO:00: Restoring backlight state
>[33888.443543] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[33888.448918] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[33888.497686] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[33888.503241] sky2 0000:30:00.0: eth0: enabling interface
>[33888.503591] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[33892.119049] sd 5:0:0:0: [sdb] No Caching mode page present
>[33892.119061] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[35600.606821] sky2 0000:30:00.0: eth0: disabling interface
>[35601.988599] PM: Syncing filesystems ... done.
>[35601.998982] PM: Preparing system for mem sleep
>[35602.103131] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[35602.114235] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[35602.125204] PM: Entering mem sleep
>[35602.125238] Suspending console(s) (use no_console_suspend to debug)
>[35602.125713] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[35602.125877] sd 0:0:0:0: [sda] Stopping disk
>[35602.390911] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[35602.644161] PM: suspend of devices complete after 518.677 msecs
>[35602.644359] PM: late suspend of devices complete after 0.194 msecs
>[35602.806161] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[35602.817118] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[35602.817204] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[35602.817289] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[35602.817522] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[35602.828111] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[35602.828162] PM: noirq suspend of devices complete after 183.800 msecs
>[35602.828381] ACPI: Preparing to enter system sleep state S3
>[35602.828478] PM: Saving platform NVS memory
>[35602.828621] Disabling non-boot CPUs ...
>[35602.829970] smpboot: CPU 1 is now offline
>[35602.830752] CPU 1 offline: Remove Rx thread
>[35602.830856] Extended CMOS year: 2000
>[35602.830856] ACPI: Low-level resume complete
>[35602.830856] PM: Restoring platform NVS memory
>[35602.830856] Extended CMOS year: 2000
>[35602.830856] CPU0: Thermal monitoring handled by SMI
>[35602.830856] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[35602.831292] Enabling non-boot CPUs ...
>[35602.831412] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[35602.829841] Initializing CPU#1
>[35602.829841] CPU1: Thermal monitoring handled by SMI
>[35602.843775] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[35602.843779] bnx2i: CPU 1 online: Create Rx thread
>[35602.844021] CPU1 is up
>[35602.845389] ACPI: Waking up from system sleep state S3
>[35602.902202] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[35602.913133] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[35602.918084] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[35602.929549] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[35602.929610] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[35602.929669] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[35602.940137] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[35603.113338] PM: noirq resume of devices complete after 222.109 msecs
>[35603.113460] PM: early resume of devices complete after 0.082 msecs
>[35603.113535] i915 0000:00:02.0: setting latency timer to 64
>[35603.114232] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[35603.115000] usb usb3: root hub lost power or was reset
>[35603.115546] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[35603.118214] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[35603.118992] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[35603.119007] usb usb4: root hub lost power or was reset
>[35603.119049] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[35603.119078] usb usb5: root hub lost power or was reset
>[35603.119095] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[35603.119122] usb usb6: root hub lost power or was reset
>[35603.119141] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[35603.119166] pci 0000:00:1e.0: setting latency timer to 64
>[35603.119178] ata_piix 0000:00:1f.1: setting latency timer to 64
>[35603.119191] ahci 0000:00:1f.2: setting latency timer to 64
>[35603.119774] ata5: port disabled--ignoring
>[35603.342051] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[35603.425081] ata2: SATA link down (SStatus 0 SControl 300)
>[35603.428093] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[35603.436537] ata3.00: configured for UDMA/100
>[35603.558073] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[35603.695017] btusb 3-1:1.0: no reset_resume for driver btusb?
>[35603.695019] btusb 3-1:1.1: no reset_resume for driver btusb?
>[35605.057064] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[35605.059432] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[35605.059435] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[35605.062899] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[35605.062902] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[35605.066856] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[35605.066858] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[35605.067139] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[35605.067143] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[35605.068491] ata1.00: configured for UDMA/100
>[35605.068538] sd 0:0:0:0: [sda] Starting disk
>[35605.248466] PM: resume of devices complete after 2135.002 msecs
>[35605.248973] PM: Finishing wakeup.
>[35605.248974] Restarting tasks ... done.
>[35605.274290] video LNXVIDEO:00: Restoring backlight state
>[35605.419314] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[35605.425227] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[35605.470490] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[35605.478185] sky2 0000:30:00.0: eth0: enabling interface
>[35605.486882] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[35605.662028] usb 4-2: new low-speed USB device number 7 using uhci_hcd
>[35605.823069] usb 4-2: New USB device found, idVendor=2188, idProduct=0ae1
>[35605.823074] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[35605.823077] usb 4-2: Product:  USB OPTICAL MOUSE
>[35605.841864] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input15
>[35605.842346] hid-generic 0003:2188:0AE1.0006: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
>[35609.055578] wlan0: authenticate with b8:a3:86:bc:24:2a
>[35609.057790] wlan0: send auth to b8:a3:86:bc:24:2a (try 1/3)
>[35609.059668] wlan0: authenticated
>[35609.062045] wlan0: associate with b8:a3:86:bc:24:2a (try 1/3)
>[35609.066151] wlan0: RX AssocResp from b8:a3:86:bc:24:2a (capab=0x411 status=0 aid=1)
>[35609.073109] wlan0: associated
>[35609.073177] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[35609.073331] cfg80211: Calling CRDA for country: US
>[35609.081385] cfg80211: Regulatory domain changed to country: US
>[35609.081394] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[35609.081401] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[35609.081407] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[35609.081412] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35609.081417] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35609.081423] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35609.081428] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[35609.363758] sd 5:0:0:0: [sdb] No Caching mode page present
>[35609.363764] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[42391.863550] wlan0: deauthenticating from b8:a3:86:bc:24:2a by local choice (reason=3)
>[42391.911300] cfg80211: Calling CRDA to update world regulatory domain
>[42391.946136] cfg80211: World regulatory domain updated:
>[42391.946140] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[42391.946143] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42391.946145] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[42391.946147] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[42391.946149] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42391.946152] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42391.946165] cfg80211: Calling CRDA for country: MX
>[42391.958031] sky2 0000:30:00.0: eth0: disabling interface
>[42391.960743] cfg80211: Regulatory domain changed to country: MX
>[42391.960747] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[42391.960749] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[42391.960751] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[42391.960754] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[42391.960756] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[42393.882024] PM: Syncing filesystems ... done.
>[42393.891555] PM: Preparing system for mem sleep
>[42394.024411] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[42394.036166] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[42394.047147] PM: Entering mem sleep
>[42394.047185] Suspending console(s) (use no_console_suspend to debug)
>[42394.047677] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[42394.070636] sd 0:0:0:0: [sda] Stopping disk
>[42394.311961] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[42394.580104] PM: suspend of devices complete after 532.691 msecs
>[42394.580262] PM: late suspend of devices complete after 0.154 msecs
>[42394.742162] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[42394.753119] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[42394.753205] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[42394.753289] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[42394.753528] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[42394.764111] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[42394.764163] PM: noirq suspend of devices complete after 183.898 msecs
>[42394.764377] ACPI: Preparing to enter system sleep state S3
>[42394.764474] PM: Saving platform NVS memory
>[42394.764638] Disabling non-boot CPUs ...
>[42394.765987] smpboot: CPU 1 is now offline
>[42394.766452] CPU 1 offline: Remove Rx thread
>[42394.766556] Extended CMOS year: 2000
>[42394.766556] ACPI: Low-level resume complete
>[42394.766556] PM: Restoring platform NVS memory
>[42394.766556] Extended CMOS year: 2000
>[42394.766556] CPU0: Thermal monitoring handled by SMI
>[42394.766556] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[42394.766556] Enabling non-boot CPUs ...
>[42394.767113] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[42394.765859] Initializing CPU#1
>[42394.765859] CPU1: Thermal monitoring handled by SMI
>[42394.779468] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[42394.779472] bnx2i: CPU 1 online: Create Rx thread
>[42394.780024] CPU1 is up
>[42394.781390] ACPI: Waking up from system sleep state S3
>[42394.839295] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[42394.850199] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[42394.855147] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[42394.866619] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[42394.866680] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[42394.866739] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[42394.877197] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[42395.050422] PM: noirq resume of devices complete after 222.124 msecs
>[42395.050546] PM: early resume of devices complete after 0.084 msecs
>[42395.050623] i915 0000:00:02.0: setting latency timer to 64
>[42395.050629] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[42395.051005] usb usb3: root hub lost power or was reset
>[42395.051841] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[42395.055306] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[42395.055336] usb usb4: root hub lost power or was reset
>[42395.055352] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[42395.055382] usb usb5: root hub lost power or was reset
>[42395.055398] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[42395.055427] usb usb6: root hub lost power or was reset
>[42395.055446] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[42395.055471] pci 0000:00:1e.0: setting latency timer to 64
>[42395.055484] ata_piix 0000:00:1f.1: setting latency timer to 64
>[42395.055496] ahci 0000:00:1f.2: setting latency timer to 64
>[42395.055659] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[42395.118134] ata5: port disabled--ignoring
>[42395.390081] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[42395.422080] ata2: SATA link down (SStatus 0 SControl 300)
>[42395.423057] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[42395.431450] ata3.00: configured for UDMA/100
>[42395.606089] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[42395.743074] btusb 3-1:1.0: no reset_resume for driver btusb?
>[42395.743078] btusb 3-1:1.1: no reset_resume for driver btusb?
>[42397.054087] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[42397.056506] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[42397.056509] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[42397.058875] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[42397.058879] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[42397.062833] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[42397.062835] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[42397.063100] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[42397.063104] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[42397.064448] ata1.00: configured for UDMA/100
>[42397.064512] sd 0:0:0:0: [sda] Starting disk
>[42397.066270] Extended CMOS year: 2000
>[42397.248580] PM: resume of devices complete after 2198.031 msecs
>[42397.249107] PM: Finishing wakeup.
>[42397.249734] usb 4-2: USB disconnect, device number 7
>[42397.249108] Restarting tasks ... done.
>[42397.283497] video LNXVIDEO:00: Restoring backlight state
>[42397.425008] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[42397.431898] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[42397.476746] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[42397.482842] sky2 0000:30:00.0: eth0: enabling interface
>[42397.483257] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[42401.578230] sd 5:0:0:0: [sdb] No Caching mode page present
>[42401.578242] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[43048.797077] sky2 0000:30:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx
>[43048.797116] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[43072.985242] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[47219.390032] sky2 0000:30:00.0: eth0: disabling interface
>[47221.197475] PM: Syncing filesystems ... done.
>[47221.344959] PM: Preparing system for mem sleep
>[47221.448028] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[47221.459162] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[47221.470104] PM: Entering mem sleep
>[47221.470128] Suspending console(s) (use no_console_suspend to debug)
>[47221.470574] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[47221.470720] sd 0:0:0:0: [sda] Stopping disk
>[47221.734640] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[47221.978105] PM: suspend of devices complete after 507.766 msecs
>[47221.978267] PM: late suspend of devices complete after 0.159 msecs
>[47222.140169] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[47222.151120] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[47222.151208] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[47222.151294] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[47222.151530] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[47222.162113] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[47222.162165] PM: noirq suspend of devices complete after 183.894 msecs
>[47222.162380] ACPI: Preparing to enter system sleep state S3
>[47222.162477] PM: Saving platform NVS memory
>[47222.162650] Disabling non-boot CPUs ...
>[47222.163995] smpboot: CPU 1 is now offline
>[47222.164456] CPU 1 offline: Remove Rx thread
>[47222.164564] Extended CMOS year: 2000
>[47222.164564] ACPI: Low-level resume complete
>[47222.164564] PM: Restoring platform NVS memory
>[47222.164564] Extended CMOS year: 2000
>[47222.164564] CPU0: Thermal monitoring handled by SMI
>[47222.164564] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[47222.164564] Enabling non-boot CPUs ...
>[47222.165164] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[47222.163863] Initializing CPU#1
>[47222.163863] CPU1: Thermal monitoring handled by SMI
>[47222.177515] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[47222.177520] bnx2i: CPU 1 online: Create Rx thread
>[47222.178020] CPU1 is up
>[47222.179403] ACPI: Waking up from system sleep state S3
>[47222.240137] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[47222.251080] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[47222.256034] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[47222.267481] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[47222.267544] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[47222.267607] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[47222.278078] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[47222.451306] PM: noirq resume of devices complete after 222.169 msecs
>[47222.451422] PM: early resume of devices complete after 0.082 msecs
>[47222.451496] i915 0000:00:02.0: setting latency timer to 64
>[47222.451750] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[47222.452299] usb usb3: root hub lost power or was reset
>[47222.453653] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[47222.456186] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[47222.456960] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[47222.456990] usb usb4: root hub lost power or was reset
>[47222.457018] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[47222.457048] usb usb5: root hub lost power or was reset
>[47222.457065] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[47222.457093] usb usb6: root hub lost power or was reset
>[47222.457111] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[47222.457137] pci 0000:00:1e.0: setting latency timer to 64
>[47222.457150] ata_piix 0000:00:1f.1: setting latency timer to 64
>[47222.457162] ahci 0000:00:1f.2: setting latency timer to 64
>[47222.459132] ata5: port disabled--ignoring
>[47222.682060] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[47222.762070] ata2: SATA link down (SStatus 0 SControl 300)
>[47222.762101] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[47222.770542] ata3.00: configured for UDMA/100
>[47222.898099] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[47223.032327] btusb 3-1:1.0: no reset_resume for driver btusb?
>[47223.032329] btusb 3-1:1.1: no reset_resume for driver btusb?
>[47224.394094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[47224.396455] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[47224.396457] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[47224.403253] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[47224.403256] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[47224.407232] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[47224.407234] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[47224.407497] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[47224.407499] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[47224.408844] ata1.00: configured for UDMA/100
>[47224.408892] sd 0:0:0:0: [sda] Starting disk
>[47224.410597] Extended CMOS year: 2000
>[47224.589466] PM: resume of devices complete after 2138.040 msecs
>[47224.589969] PM: Finishing wakeup.
>[47224.589971] Restarting tasks ... done.
>[47224.640083] video LNXVIDEO:00: Restoring backlight state
>[47224.831994] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[47224.835113] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[47224.882805] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[47224.891354] sky2 0000:30:00.0: eth0: enabling interface
>[47224.891840] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[47228.475171] wlan0: authenticate with b8:a3:86:bc:24:2a
>[47228.487178] wlan0: send auth to b8:a3:86:bc:24:2a (try 1/3)
>[47228.489015] wlan0: authenticated
>[47228.490059] wlan0: associate with b8:a3:86:bc:24:2a (try 1/3)
>[47228.495347] wlan0: RX AssocResp from b8:a3:86:bc:24:2a (capab=0x411 status=0 aid=1)
>[47228.499321] wlan0: associated
>[47228.499351] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[47228.499426] cfg80211: Calling CRDA for country: US
>[47228.530244] cfg80211: Regulatory domain changed to country: US
>[47228.530257] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[47228.530260] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[47228.530262] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[47228.530265] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[47228.530267] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[47228.530269] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[47228.530271] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[47228.715837] sd 5:0:0:0: [sdb] No Caching mode page present
>[47228.715849] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[47270.220052] usb 4-2: new low-speed USB device number 8 using uhci_hcd
>[47270.376145] usb 4-2: New USB device found, idVendor=2188, idProduct=0ae1
>[47270.376155] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[47270.376163] usb 4-2: Product:  USB OPTICAL MOUSE
>[47270.396926] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input16
>[47270.397761] hid-generic 0003:2188:0AE1.0007: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
>[52711.783237] wlan0: deauthenticating from b8:a3:86:bc:24:2a by local choice (reason=3)
>[52711.829959] cfg80211: Calling CRDA to update world regulatory domain
>[52711.861366] sky2 0000:30:00.0: eth0: disabling interface
>[52711.863756] cfg80211: World regulatory domain updated:
>[52711.863760] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[52711.863762] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[52711.863765] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[52711.863767] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[52711.863769] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[52711.863771] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[52711.863784] cfg80211: Calling CRDA for country: MX
>[52711.871079] cfg80211: Regulatory domain changed to country: MX
>[52711.871083] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[52711.871086] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[52711.871088] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[52711.871091] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[52711.871093] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[52713.544463] PM: Syncing filesystems ... done.
>[52713.812674] PM: Preparing system for mem sleep
>[52713.948160] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[52713.959179] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[52713.970142] PM: Entering mem sleep
>[52713.970180] Suspending console(s) (use no_console_suspend to debug)
>[52713.970700] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[52714.001543] sd 0:0:0:0: [sda] Stopping disk
>[52714.234067] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[52714.516106] PM: suspend of devices complete after 545.663 msecs
>[52714.516272] PM: late suspend of devices complete after 0.162 msecs
>[52714.678161] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[52714.689121] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[52714.689210] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[52714.689297] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[52714.689531] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[52714.700113] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[52714.700165] PM: noirq suspend of devices complete after 183.890 msecs
>[52714.700379] ACPI: Preparing to enter system sleep state S3
>[52714.700477] PM: Saving platform NVS memory
>[52714.700606] Disabling non-boot CPUs ...
>[52714.701955] smpboot: CPU 1 is now offline
>[52714.702404] CPU 1 offline: Remove Rx thread
>[52714.702498] Extended CMOS year: 2000
>[52714.702498] ACPI: Low-level resume complete
>[52714.702498] PM: Restoring platform NVS memory
>[52714.702498] Extended CMOS year: 2000
>[52714.702498] CPU0: Thermal monitoring handled by SMI
>[52714.702498] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[52714.702498] Enabling non-boot CPUs ...
>[52714.703054] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[52714.701827] Initializing CPU#1
>[52714.701827] CPU1: Thermal monitoring handled by SMI
>[52714.715420] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[52714.715424] bnx2i: CPU 1 online: Create Rx thread
>[52714.716024] CPU1 is up
>[52714.717387] ACPI: Waking up from system sleep state S3
>[52714.774137] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[52714.785080] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[52714.790033] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[52714.801485] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[52714.801548] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[52714.801610] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[52714.812078] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[52714.985309] PM: noirq resume of devices complete after 222.173 msecs
>[52714.985429] PM: early resume of devices complete after 0.083 msecs
>[52714.985504] i915 0000:00:02.0: setting latency timer to 64
>[52714.986019] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[52714.987006] usb usb3: root hub lost power or was reset
>[52714.988011] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[52714.990193] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[52714.991084] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[52714.991113] usb usb4: root hub lost power or was reset
>[52714.991130] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[52714.991159] usb usb5: root hub lost power or was reset
>[52714.991176] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[52714.991205] usb usb6: root hub lost power or was reset
>[52714.991224] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[52714.991249] pci 0000:00:1e.0: setting latency timer to 64
>[52714.991262] ata_piix 0000:00:1f.1: setting latency timer to 64
>[52714.991274] ahci 0000:00:1f.2: setting latency timer to 64
>[52714.993216] ata5: port disabled--ignoring
>[52715.296070] ata2: SATA link down (SStatus 0 SControl 300)
>[52715.296096] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[52715.304540] ata3.00: configured for UDMA/100
>[52715.328065] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[52715.462507] btusb 3-1:1.0: no reset_resume for driver btusb?
>[52715.462508] btusb 3-1:1.1: no reset_resume for driver btusb?
>[52715.553080] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[52715.919090] usb 4-2: reset low-speed USB device number 8 using uhci_hcd
>[52716.928082] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[52716.930412] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[52716.930415] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[52716.938470] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[52716.938472] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[52716.942411] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[52716.942413] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[52716.942676] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[52716.942679] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[52716.944023] ata1.00: configured for UDMA/100
>[52716.944072] sd 0:0:0:0: [sda] Starting disk
>[52717.128470] PM: resume of devices complete after 2143.037 msecs
>[52717.128999] PM: Finishing wakeup.
>[52717.129000] Restarting tasks ... done.
>[52717.158570] video LNXVIDEO:00: Restoring backlight state
>[52717.313826] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[52717.319621] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[52717.373125] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[52717.381329] sky2 0000:30:00.0: eth0: enabling interface
>[52717.383523] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[52720.906748] wlan0: authenticate with b8:a3:86:bc:24:2a
>[52720.909296] wlan0: send auth to b8:a3:86:bc:24:2a (try 1/3)
>[52720.911207] wlan0: authenticated
>[52720.912032] wlan0: associate with b8:a3:86:bc:24:2a (try 1/3)
>[52720.916079] wlan0: RX AssocResp from b8:a3:86:bc:24:2a (capab=0x411 status=0 aid=1)
>[52720.920784] wlan0: associated
>[52720.920831] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[52720.920920] cfg80211: Calling CRDA for country: US
>[52720.925322] cfg80211: Regulatory domain changed to country: US
>[52720.925326] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[52720.925329] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[52720.925331] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[52720.925333] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[52720.925335] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[52720.925338] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[52720.925340] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[52720.935021] sd 5:0:0:0: [sdb] No Caching mode page present
>[52720.935029] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[55384.659430] wlan0: deauthenticating from b8:a3:86:bc:24:2a by local choice (reason=3)
>[55384.691437] cfg80211: Calling CRDA to update world regulatory domain
>[55384.695848] cfg80211: World regulatory domain updated:
>[55384.695853] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[55384.695856] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[55384.695858] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[55384.695860] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[55384.695862] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[55384.695865] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[55384.695886] cfg80211: Calling CRDA for country: MX
>[55384.700486] cfg80211: Regulatory domain changed to country: MX
>[55384.700491] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[55384.700494] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[55384.700496] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[55384.700498] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[55384.700500] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[55384.710387] sky2 0000:30:00.0: eth0: disabling interface
>[55386.363431] PM: Syncing filesystems ... done.
>[55386.600162] PM: Preparing system for mem sleep
>[55386.736335] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[55386.748182] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[55386.759175] PM: Entering mem sleep
>[55386.759210] Suspending console(s) (use no_console_suspend to debug)
>[55386.759634] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[55386.759790] sd 0:0:0:0: [sda] Stopping disk
>[55387.023733] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[55387.280108] PM: suspend of devices complete after 520.679 msecs
>[55387.280274] PM: late suspend of devices complete after 0.163 msecs
>[55387.442163] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[55387.453122] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[55387.453211] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[55387.453298] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[55387.453534] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[55387.464114] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[55387.464166] PM: noirq suspend of devices complete after 183.888 msecs
>[55387.464381] ACPI: Preparing to enter system sleep state S3
>[55387.464479] PM: Saving platform NVS memory
>[55387.464686] Disabling non-boot CPUs ...
>[55387.466032] smpboot: CPU 1 is now offline
>[55387.466480] CPU 1 offline: Remove Rx thread
>[55387.466573] Extended CMOS year: 2000
>[55387.466573] ACPI: Low-level resume complete
>[55387.466573] PM: Restoring platform NVS memory
>[55387.466573] Extended CMOS year: 2000
>[55387.466573] CPU0: Thermal monitoring handled by SMI
>[55387.466573] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[55387.466573] Enabling non-boot CPUs ...
>[55387.467135] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[55387.465903] Initializing CPU#1
>[55387.465903] CPU1: Thermal monitoring handled by SMI
>[55387.479499] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[55387.479503] bnx2i: CPU 1 online: Create Rx thread
>[55387.480024] CPU1 is up
>[55387.481393] ACPI: Waking up from system sleep state S3
>[55387.540137] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[55387.551080] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[55387.557033] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[55387.568485] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[55387.568548] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[55387.568611] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[55387.579078] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[55387.752308] PM: noirq resume of devices complete after 223.171 msecs
>[55387.752427] PM: early resume of devices complete after 0.083 msecs
>[55387.752505] i915 0000:00:02.0: setting latency timer to 64
>[55387.752511] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[55387.752988] usb usb3: root hub lost power or was reset
>[55387.753144] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[55387.757188] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[55387.757217] usb usb4: root hub lost power or was reset
>[55387.757233] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[55387.757263] usb usb5: root hub lost power or was reset
>[55387.757279] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[55387.757307] usb usb6: root hub lost power or was reset
>[55387.757325] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[55387.757351] pci 0000:00:1e.0: setting latency timer to 64
>[55387.757363] ata_piix 0000:00:1f.1: setting latency timer to 64
>[55387.757376] ahci 0000:00:1f.2: setting latency timer to 64
>[55387.757539] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[55387.830528] ata5: port disabled--ignoring
>[55388.001058] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[55388.134070] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[55388.134102] ata2: SATA link down (SStatus 0 SControl 300)
>[55388.149136] ata3.00: configured for UDMA/100
>[55388.367079] usb 4-2: reset low-speed USB device number 8 using uhci_hcd
>[55388.750110] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[55388.884956] btusb 3-1:1.0: no reset_resume for driver btusb?
>[55388.884958] btusb 3-1:1.1: no reset_resume for driver btusb?
>[55389.766098] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[55389.768433] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[55389.768435] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[55389.775969] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[55389.775972] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[55389.779896] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[55389.779898] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[55389.780164] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[55389.780168] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[55389.781526] ata1.00: configured for UDMA/100
>[55389.781574] sd 0:0:0:0: [sda] Starting disk
>[55389.965458] PM: resume of devices complete after 2213.027 msecs
>[55389.965984] PM: Finishing wakeup.
>[55389.965985] Restarting tasks ... done.
>[55389.994368] video LNXVIDEO:00: Restoring backlight state
>[55390.191488] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[55390.197509] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[55390.241694] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[55390.247129] sky2 0000:30:00.0: eth0: enabling interface
>[55390.251490] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[55393.922246] wlan0: authenticate with b8:a3:86:bc:24:2a
>[55393.924305] wlan0: send auth to b8:a3:86:bc:24:2a (try 1/3)
>[55393.926235] wlan0: authenticated
>[55393.927059] wlan0: associate with b8:a3:86:bc:24:2a (try 1/3)
>[55393.931165] wlan0: RX AssocResp from b8:a3:86:bc:24:2a (capab=0x411 status=0 aid=1)
>[55393.936584] wlan0: associated
>[55393.936618] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[55393.936695] cfg80211: Calling CRDA for country: US
>[55393.942298] cfg80211: Regulatory domain changed to country: US
>[55393.942304] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[55393.942308] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[55393.942312] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[55393.942316] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[55393.942320] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[55393.942323] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[55393.942327] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[55394.093998] sd 5:0:0:0: [sdb] No Caching mode page present
>[55394.094022] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[57359.710498] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[57731.515105] usb 2-1: new high-speed USB device number 27 using ehci_hcd
>[57731.871284] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c24
>[57731.871295] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[57731.871303] usb 2-1: Product: HUAWEI Mobile
>[57731.871309] usb 2-1: Manufacturer: HUAWEI
>[57731.878077] scsi30 : usb-storage 2-1:1.0
>[57731.878807] scsi31 : usb-storage 2-1:1.1
>[57732.291206] usb 2-1: usbfs: process 24442 (usb_modeswitch) did not claim interface 0 before use
>[57732.291688] usb 2-1: USB disconnect, device number 27
>[57734.697084] usb 2-1: new high-speed USB device number 28 using ehci_hcd
>[57734.812573] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c23
>[57734.812584] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[57734.812596] usb 2-1: Product: HUAWEI Mobile
>[57734.812602] usb 2-1: Manufacturer: HUAWEI
>[57734.814179] option 2-1:1.0: GSM modem (1-port) converter detected
>[57734.814650] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
>[57734.814950] option 2-1:1.1: GSM modem (1-port) converter detected
>[57734.815222] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
>[57734.815510] option 2-1:1.2: GSM modem (1-port) converter detected
>[57734.815822] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
>[57734.816171] option 2-1:1.3: GSM modem (1-port) converter detected
>[57734.816509] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
>[57734.816936] scsi32 : usb-storage 2-1:1.4
>[57735.820975] scsi 32:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[57735.822405] sd 32:0:0:0: Attached scsi generic sg3 type 0
>[57735.824065] sd 32:0:0:0: [sdc] Attached SCSI removable disk
>[58587.837198] usb 2-1: USB disconnect, device number 28
>[58587.837959] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[58587.838031] option 2-1:1.0: device disconnected
>[58587.838503] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[58587.838540] option 2-1:1.1: device disconnected
>[58587.840041] option1 ttyUSB2: option_instat_callback: error -108
>[58587.840277] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[58587.840317] option 2-1:1.2: device disconnected
>[58587.842583] option1 ttyUSB3: option_instat_callback: error -108
>[58587.842817] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[58587.842857] option 2-1:1.3: device disconnected
>[58595.987089] usb 2-1: new high-speed USB device number 29 using ehci_hcd
>[58596.349962] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c24
>[58596.349983] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[58596.349990] usb 2-1: Product: HUAWEI Mobile
>[58596.349996] usb 2-1: Manufacturer: HUAWEI
>[58596.353495] scsi33 : usb-storage 2-1:1.0
>[58596.353995] scsi34 : usb-storage 2-1:1.1
>[58596.565620] usb 2-1: usbfs: process 24735 (usb_modeswitch) did not claim interface 0 before use
>[58596.566122] usb 2-1: USB disconnect, device number 29
>[58599.045067] usb 2-1: new high-speed USB device number 30 using ehci_hcd
>[58599.160500] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c23
>[58599.160515] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[58599.160523] usb 2-1: Product: HUAWEI Mobile
>[58599.160529] usb 2-1: Manufacturer: HUAWEI
>[58599.162481] option 2-1:1.0: GSM modem (1-port) converter detected
>[58599.162822] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
>[58599.163145] option 2-1:1.1: GSM modem (1-port) converter detected
>[58599.163475] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
>[58599.163760] option 2-1:1.2: GSM modem (1-port) converter detected
>[58599.164089] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
>[58599.164410] option 2-1:1.3: GSM modem (1-port) converter detected
>[58599.165024] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
>[58599.165426] scsi35 : usb-storage 2-1:1.4
>[58600.169075] scsi 35:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[58600.173214] sd 35:0:0:0: Attached scsi generic sg3 type 0
>[58600.174898] sd 35:0:0:0: [sdc] Attached SCSI removable disk
>[58622.127557] usb 2-1: USB disconnect, device number 30
>[58622.127975] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[58622.128056] option 2-1:1.0: device disconnected
>[58622.128545] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[58622.128582] option 2-1:1.1: device disconnected
>[58622.130042] option1 ttyUSB2: option_instat_callback: error -108
>[58622.130289] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[58622.130328] option 2-1:1.2: device disconnected
>[58622.132026] option1 ttyUSB3: option_instat_callback: error -108
>[58622.132231] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[58622.132270] option 2-1:1.3: device disconnected
>[58623.000239] usb 4-2: USB disconnect, device number 8
>[58666.743049] usb 2-1: new high-speed USB device number 31 using ehci_hcd
>[58667.104808] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c24
>[58667.104813] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[58667.104821] usb 2-1: Product: HUAWEI Mobile
>[58667.104823] usb 2-1: Manufacturer: HUAWEI
>[58667.110332] scsi36 : usb-storage 2-1:1.0
>[58667.115029] scsi37 : usb-storage 2-1:1.1
>[58667.365701] usb 2-1: usbfs: process 24950 (usb_modeswitch) did not claim interface 0 before use
>[58667.366349] usb 2-1: USB disconnect, device number 31
>[58667.451945] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[58669.798038] usb 2-1: new high-speed USB device number 32 using ehci_hcd
>[58669.913735] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c23
>[58669.913751] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[58669.913758] usb 2-1: Product: HUAWEI Mobile
>[58669.913765] usb 2-1: Manufacturer: HUAWEI
>[58669.915468] option 2-1:1.0: GSM modem (1-port) converter detected
>[58669.915894] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
>[58669.916208] option 2-1:1.1: GSM modem (1-port) converter detected
>[58669.916531] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
>[58669.916813] option 2-1:1.2: GSM modem (1-port) converter detected
>[58669.917112] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
>[58669.917440] option 2-1:1.3: GSM modem (1-port) converter detected
>[58669.917773] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
>[58669.918187] scsi38 : usb-storage 2-1:1.4
>[58670.921049] scsi 38:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[58670.922168] sd 38:0:0:0: Attached scsi generic sg3 type 0
>[58670.926241] sd 38:0:0:0: [sdc] Attached SCSI removable disk
>[58880.424150] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[58924.673330] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[60512.622444] usb 2-1: USB disconnect, device number 32
>[60512.623569] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[60512.623612] option 2-1:1.0: device disconnected
>[60512.624562] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[60512.624603] option 2-1:1.1: device disconnected
>[60512.626049] option1 ttyUSB2: option_instat_callback: error -108
>[60512.626251] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[60512.626290] option 2-1:1.2: device disconnected
>[60512.628055] option1 ttyUSB3: option_instat_callback: error -108
>[60512.628270] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[60512.628309] option 2-1:1.3: device disconnected
>[60521.088073] usb 2-1: new high-speed USB device number 33 using ehci_hcd
>[60521.444479] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c24
>[60521.444494] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[60521.444502] usb 2-1: Product: HUAWEI Mobile
>[60521.444508] usb 2-1: Manufacturer: HUAWEI
>[60521.448364] scsi39 : usb-storage 2-1:1.0
>[60521.448803] scsi40 : usb-storage 2-1:1.1
>[60521.864005] usb 2-1: usbfs: process 27885 (usb_modeswitch) did not claim interface 0 before use
>[60521.864639] usb 2-1: USB disconnect, device number 33
>[60524.269072] usb 2-1: new high-speed USB device number 34 using ehci_hcd
>[60524.384630] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c23
>[60524.384642] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[60524.384649] usb 2-1: Product: HUAWEI Mobile
>[60524.384656] usb 2-1: Manufacturer: HUAWEI
>[60524.386123] option 2-1:1.0: GSM modem (1-port) converter detected
>[60524.386785] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
>[60524.387097] option 2-1:1.1: GSM modem (1-port) converter detected
>[60524.387572] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
>[60524.387846] option 2-1:1.2: GSM modem (1-port) converter detected
>[60524.388400] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
>[60524.388709] option 2-1:1.3: GSM modem (1-port) converter detected
>[60524.389294] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
>[60524.389733] scsi41 : usb-storage 2-1:1.4
>[60525.392914] scsi 41:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[60525.394928] sd 41:0:0:0: Attached scsi generic sg3 type 0
>[60525.397911] sd 41:0:0:0: [sdc] Attached SCSI removable disk
>[60533.771274] usb 2-1: USB disconnect, device number 34
>[60533.771657] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[60533.771698] option 2-1:1.0: device disconnected
>[60533.772081] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[60533.772120] option 2-1:1.1: device disconnected
>[60533.774027] option1 ttyUSB2: option_instat_callback: error -108
>[60533.774258] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[60533.774300] option 2-1:1.2: device disconnected
>[60533.776047] option1 ttyUSB3: option_instat_callback: error -108
>[60533.776230] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[60533.776268] option 2-1:1.3: device disconnected
>[60540.675082] usb 2-2: new high-speed USB device number 35 using ehci_hcd
>[60541.031067] usb 2-2: New USB device found, idVendor=12d1, idProduct=1c24
>[60541.031078] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[60541.031086] usb 2-2: Product: HUAWEI Mobile
>[60541.031092] usb 2-2: Manufacturer: HUAWEI
>[60541.039083] scsi42 : usb-storage 2-2:1.0
>[60541.046025] scsi43 : usb-storage 2-2:1.1
>[60541.293921] usb 2-2: usbfs: process 27974 (usb_modeswitch) did not claim interface 0 before use
>[60541.294432] usb 2-2: USB disconnect, device number 35
>[60543.726081] usb 2-2: new high-speed USB device number 36 using ehci_hcd
>[60543.841833] usb 2-2: New USB device found, idVendor=12d1, idProduct=1c23
>[60543.841844] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[60543.841856] usb 2-2: Product: HUAWEI Mobile
>[60543.841862] usb 2-2: Manufacturer: HUAWEI
>[60543.843301] option 2-2:1.0: GSM modem (1-port) converter detected
>[60543.843598] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB0
>[60543.843875] option 2-2:1.1: GSM modem (1-port) converter detected
>[60543.844141] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1
>[60543.844413] option 2-2:1.2: GSM modem (1-port) converter detected
>[60543.845145] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB2
>[60543.845482] option 2-2:1.3: GSM modem (1-port) converter detected
>[60543.845806] usb 2-2: GSM modem (1-port) converter now attached to ttyUSB3
>[60543.846532] scsi44 : usb-storage 2-2:1.4
>[60544.849156] scsi 44:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[60544.851386] sd 44:0:0:0: Attached scsi generic sg3 type 0
>[60544.854355] sd 44:0:0:0: [sdc] Attached SCSI removable disk
>[60689.898212] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[60731.435193] usb 2-2: USB disconnect, device number 36
>[60731.435937] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[60731.435976] option 2-2:1.0: device disconnected
>[60731.436820] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[60731.436854] option 2-2:1.1: device disconnected
>[60731.439034] option1 ttyUSB2: option_instat_callback: error -108
>[60731.440324] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[60731.440367] option 2-2:1.2: device disconnected
>[60731.442050] option1 ttyUSB3: option_instat_callback: error -108
>[60731.442515] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[60731.442549] option 2-2:1.3: device disconnected
>[60737.995088] usb 2-1: new high-speed USB device number 37 using ehci_hcd
>[60738.356721] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c24
>[60738.356733] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[60738.356740] usb 2-1: Product: HUAWEI Mobile
>[60738.356746] usb 2-1: Manufacturer: HUAWEI
>[60738.370065] scsi45 : usb-storage 2-1:1.0
>[60738.387707] scsi46 : usb-storage 2-1:1.1
>[60738.619507] usb 2-1: usbfs: process 29234 (usb_modeswitch) did not claim interface 0 before use
>[60738.620140] usb 2-1: USB disconnect, device number 37
>[60741.052107] usb 2-1: new high-speed USB device number 38 using ehci_hcd
>[60741.167878] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c23
>[60741.167890] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[60741.167897] usb 2-1: Product: HUAWEI Mobile
>[60741.167904] usb 2-1: Manufacturer: HUAWEI
>[60741.169349] option 2-1:1.0: GSM modem (1-port) converter detected
>[60741.170179] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
>[60741.170471] option 2-1:1.1: GSM modem (1-port) converter detected
>[60741.170955] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
>[60741.171257] option 2-1:1.2: GSM modem (1-port) converter detected
>[60741.171760] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
>[60741.172101] option 2-1:1.3: GSM modem (1-port) converter detected
>[60741.172659] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
>[60741.173092] scsi47 : usb-storage 2-1:1.4
>[60742.177077] scsi 47:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[60742.179459] sd 47:0:0:0: Attached scsi generic sg3 type 0
>[60742.181137] sd 47:0:0:0: [sdc] Attached SCSI removable disk
>[61780.635065] usb 4-2: new low-speed USB device number 9 using uhci_hcd
>[61780.749081] usb 4-2: device descriptor read/64, error -71
>[61780.964066] usb 4-2: device descriptor read/64, error -71
>[61781.167077] usb 4-2: new low-speed USB device number 10 using uhci_hcd
>[61781.281070] usb 4-2: device descriptor read/64, error -71
>[61781.495086] usb 4-2: device descriptor read/64, error -71
>[61781.698071] usb 4-2: new low-speed USB device number 11 using uhci_hcd
>[61782.108058] usb 4-2: device not accepting address 11, error -71
>[61782.210093] usb 4-2: new low-speed USB device number 12 using uhci_hcd
>[61782.619071] usb 4-2: device not accepting address 12, error -71
>[61782.619106] hub 4-0:1.0: unable to enumerate USB device on port 2
>[61790.584073] usb 2-1: USB disconnect, device number 38
>[61790.584689] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[61790.584726] option 2-1:1.0: device disconnected
>[61790.585077] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[61790.585110] option 2-1:1.1: device disconnected
>[61790.587038] option1 ttyUSB2: option_instat_callback: error -108
>[61790.587252] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[61790.587287] option 2-1:1.2: device disconnected
>[61790.589045] option1 ttyUSB3: option_instat_callback: error -108
>[61790.589336] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[61790.589371] option 2-1:1.3: device disconnected
>[61791.872104] usb 4-2: new low-speed USB device number 13 using uhci_hcd
>[61792.031102] usb 4-2: New USB device found, idVendor=2188, idProduct=0ae1
>[61792.031113] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[61792.031121] usb 4-2: Product:  USB OPTICAL MOUSE
>[61792.051777] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input17
>[61792.053161] hid-generic 0003:2188:0AE1.0008: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
>[61798.605107] usb 2-1: new high-speed USB device number 40 using ehci_hcd
>[61798.961700] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c24
>[61798.961712] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[61798.961720] usb 2-1: Product: HUAWEI Mobile
>[61798.961726] usb 2-1: Manufacturer: HUAWEI
>[61798.964463] scsi48 : usb-storage 2-1:1.0
>[61798.964941] scsi49 : usb-storage 2-1:1.1
>[61799.163825] usb 2-1: usbfs: process 29453 (usb_modeswitch) did not claim interface 0 before use
>[61799.164233] usb 2-1: USB disconnect, device number 40
>[61801.647058] usb 2-1: new high-speed USB device number 41 using ehci_hcd
>[61801.762752] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c23
>[61801.762763] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[61801.762775] usb 2-1: Product: HUAWEI Mobile
>[61801.762781] usb 2-1: Manufacturer: HUAWEI
>[61801.764236] option 2-1:1.0: GSM modem (1-port) converter detected
>[61801.764574] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
>[61801.764862] option 2-1:1.1: GSM modem (1-port) converter detected
>[61801.765120] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
>[61801.765405] option 2-1:1.2: GSM modem (1-port) converter detected
>[61801.766551] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
>[61801.766927] option 2-1:1.3: GSM modem (1-port) converter detected
>[61801.767723] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
>[61801.768185] scsi50 : usb-storage 2-1:1.4
>[61802.771199] scsi 50:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[61802.773434] sd 50:0:0:0: Attached scsi generic sg3 type 0
>[61802.777004] sd 50:0:0:0: [sdc] Attached SCSI removable disk
>[61860.156558] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[64164.073285] usb 2-1: USB disconnect, device number 41
>[64164.073771] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[64164.073790] option 2-1:1.0: device disconnected
>[64164.074741] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[64164.074781] option 2-1:1.1: device disconnected
>[64164.076214] option1 ttyUSB2: option_instat_callback: error -108
>[64164.076454] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[64164.076495] option 2-1:1.2: device disconnected
>[64164.078039] option1 ttyUSB3: option_instat_callback: error -108
>[64164.078610] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[64164.078656] option 2-1:1.3: device disconnected
>[64170.560100] usb 2-1: new high-speed USB device number 42 using ehci_hcd
>[64170.925075] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c24
>[64170.925085] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[64170.925097] usb 2-1: Product: HUAWEI Mobile
>[64170.925104] usb 2-1: Manufacturer: HUAWEI
>[64170.933034] scsi51 : usb-storage 2-1:1.0
>[64170.950044] scsi52 : usb-storage 2-1:1.1
>[64171.344233] usb 2-1: usbfs: process 30220 (usb_modeswitch) did not claim interface 0 before use
>[64171.344749] usb 2-1: USB disconnect, device number 42
>[64173.750121] usb 2-1: new high-speed USB device number 43 using ehci_hcd
>[64173.865487] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c23
>[64173.865497] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[64173.865504] usb 2-1: Product: HUAWEI Mobile
>[64173.865515] usb 2-1: Manufacturer: HUAWEI
>[64173.866958] option 2-1:1.0: GSM modem (1-port) converter detected
>[64173.867326] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
>[64173.867611] option 2-1:1.1: GSM modem (1-port) converter detected
>[64173.867854] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
>[64173.868154] option 2-1:1.2: GSM modem (1-port) converter detected
>[64173.868543] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
>[64173.868853] option 2-1:1.3: GSM modem (1-port) converter detected
>[64173.869184] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
>[64173.869625] scsi53 : usb-storage 2-1:1.4
>[64174.873067] scsi 53:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[64174.875125] sd 53:0:0:0: Attached scsi generic sg3 type 0
>[64174.877501] sd 53:0:0:0: [sdc] Attached SCSI removable disk
>[65776.924674] usb 2-1: USB disconnect, device number 43
>[65776.925655] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[65776.925698] option 2-1:1.0: device disconnected
>[65776.926636] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[65776.926675] option 2-1:1.1: device disconnected
>[65776.929029] option1 ttyUSB2: option_instat_callback: error -108
>[65776.930107] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[65776.930149] option 2-1:1.2: device disconnected
>[65776.932022] option1 ttyUSB3: option_instat_callback: error -108
>[65776.932113] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[65776.932129] option 2-1:1.3: device disconnected
>[65786.641067] usb 2-1: new high-speed USB device number 44 using ehci_hcd
>[65787.004209] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c24
>[65787.004223] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[65787.004230] usb 2-1: Product: HUAWEI Mobile
>[65787.004237] usb 2-1: Manufacturer: HUAWEI
>[65787.019037] scsi54 : usb-storage 2-1:1.0
>[65787.025043] scsi55 : usb-storage 2-1:1.1
>[65787.267360] usb 2-1: usbfs: process 30658 (usb_modeswitch) did not claim interface 0 before use
>[65787.267882] usb 2-1: USB disconnect, device number 44
>[65789.699075] usb 2-1: new high-speed USB device number 45 using ehci_hcd
>[65789.814860] usb 2-1: New USB device found, idVendor=12d1, idProduct=1c23
>[65789.814870] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
>[65789.814877] usb 2-1: Product: HUAWEI Mobile
>[65789.814884] usb 2-1: Manufacturer: HUAWEI
>[65789.816340] option 2-1:1.0: GSM modem (1-port) converter detected
>[65789.816683] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
>[65789.816968] option 2-1:1.1: GSM modem (1-port) converter detected
>[65789.817236] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
>[65789.817510] option 2-1:1.2: GSM modem (1-port) converter detected
>[65789.817799] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
>[65789.818146] option 2-1:1.3: GSM modem (1-port) converter detected
>[65789.818559] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
>[65789.818984] scsi56 : usb-storage 2-1:1.4
>[65790.821094] scsi 56:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
>[65790.823365] sd 56:0:0:0: Attached scsi generic sg3 type 0
>[65790.825391] sd 56:0:0:0: [sdc] Attached SCSI removable disk
>[66308.872638] usb 2-1: USB disconnect, device number 45
>[66308.873080] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
>[66308.873120] option 2-1:1.0: device disconnected
>[66308.873722] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
>[66308.873758] option 2-1:1.1: device disconnected
>[66308.876028] option1 ttyUSB2: option_instat_callback: error -108
>[66308.876250] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
>[66308.876288] option 2-1:1.2: device disconnected
>[66308.878024] option1 ttyUSB3: option_instat_callback: error -108
>[66308.878204] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
>[66308.878239] option 2-1:1.3: device disconnected
>[69360.801116] wlan0: deauthenticating from b8:a3:86:bc:24:2a by local choice (reason=3)
>[69360.843113] cfg80211: Calling CRDA to update world regulatory domain
>[69360.863046] sky2 0000:30:00.0: eth0: disabling interface
>[69361.029932] cfg80211: World regulatory domain updated:
>[69361.029938] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[69361.029941] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[69361.029944] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[69361.029947] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[69361.029950] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[69361.029952] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[69361.029965] cfg80211: Calling CRDA for country: MX
>[69361.033394] cfg80211: Regulatory domain changed to country: MX
>[69361.033398] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[69361.033401] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[69361.033403] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[69361.033405] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[69361.033407] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[69362.250062] usb 4-2: USB disconnect, device number 13
>[69362.900933] PM: Syncing filesystems ... done.
>[69363.179301] PM: Preparing system for mem sleep
>[69363.315430] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[69363.326138] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[69363.337140] PM: Entering mem sleep
>[69363.337179] Suspending console(s) (use no_console_suspend to debug)
>[69363.338178] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[69363.385061] sd 0:0:0:0: [sda] Stopping disk
>[69363.602736] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[69363.886100] PM: suspend of devices complete after 548.689 msecs
>[69363.886263] PM: late suspend of devices complete after 0.159 msecs
>[69364.048170] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[69364.059119] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[69364.059205] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[69364.059289] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[69364.059525] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[69364.070112] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[69364.070164] PM: noirq suspend of devices complete after 183.898 msecs
>[69364.070378] ACPI: Preparing to enter system sleep state S3
>[69364.070474] PM: Saving platform NVS memory
>[69364.070705] Disabling non-boot CPUs ...
>[69364.072048] smpboot: CPU 1 is now offline
>[69364.072543] CPU 1 offline: Remove Rx thread
>[69364.072650] Extended CMOS year: 2000
>[69364.072650] ACPI: Low-level resume complete
>[69364.072650] PM: Restoring platform NVS memory
>[69364.072650] Extended CMOS year: 2000
>[69364.072650] CPU0: Thermal monitoring handled by SMI
>[69364.072650] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[69364.073090] Enabling non-boot CPUs ...
>[69364.073207] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[69364.071919] Initializing CPU#1
>[69364.071919] CPU1: Thermal monitoring handled by SMI
>[69364.085568] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[69364.085573] bnx2i: CPU 1 online: Create Rx thread
>[69364.086024] CPU1 is up
>[69364.087392] ACPI: Waking up from system sleep state S3
>[69364.149138] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[69364.160080] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[69364.166034] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[69364.177483] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[69364.177546] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[69364.177609] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[69364.188078] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[69364.361307] PM: noirq resume of devices complete after 223.172 msecs
>[69364.361426] PM: early resume of devices complete after 0.083 msecs
>[69364.361503] i915 0000:00:02.0: setting latency timer to 64
>[69364.361509] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[69364.362003] usb usb3: root hub lost power or was reset
>[69364.363012] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[69364.366188] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[69364.366216] usb usb4: root hub lost power or was reset
>[69364.366233] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[69364.366262] usb usb5: root hub lost power or was reset
>[69364.366277] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[69364.366306] usb usb6: root hub lost power or was reset
>[69364.366324] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[69364.366349] pci 0000:00:1e.0: setting latency timer to 64
>[69364.366361] ata_piix 0000:00:1f.1: setting latency timer to 64
>[69364.366374] ahci 0000:00:1f.2: setting latency timer to 64
>[69364.366538] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[69364.416701] ata5: port disabled--ignoring
>[69364.589075] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[69364.718060] ata2: SATA link down (SStatus 0 SControl 300)
>[69364.719080] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[69364.727520] ata3.00: configured for UDMA/100
>[69364.805081] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[69364.939949] btusb 3-1:1.0: no reset_resume for driver btusb?
>[69364.939951] btusb 3-1:1.1: no reset_resume for driver btusb?
>[69366.299094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[69366.301445] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[69366.301448] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[69366.308624] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[69366.308627] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[69366.312589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[69366.312591] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[69366.312853] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[69366.312855] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[69366.314202] ata1.00: configured for UDMA/100
>[69366.314252] sd 0:0:0:0: [sda] Starting disk
>[69366.492589] PM: resume of devices complete after 2131.158 msecs
>[69366.493117] PM: Finishing wakeup.
>[69366.493118] Restarting tasks ... done.
>[69366.522789] video LNXVIDEO:00: Restoring backlight state
>[69366.812576] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[69366.817595] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[69366.867836] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[69366.875676] sky2 0000:30:00.0: eth0: enabling interface
>[69366.880250] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[69370.296101] wlan0: authenticate with b8:a3:86:bc:24:2a
>[69370.298620] wlan0: send auth to b8:a3:86:bc:24:2a (try 1/3)
>[69370.300527] wlan0: authenticated
>[69370.302040] wlan0: associate with b8:a3:86:bc:24:2a (try 1/3)
>[69370.306158] wlan0: RX AssocResp from b8:a3:86:bc:24:2a (capab=0x411 status=0 aid=1)
>[69370.311253] wlan0: associated
>[69370.311329] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[69370.311483] cfg80211: Calling CRDA for country: US
>[69370.344238] cfg80211: Regulatory domain changed to country: US
>[69370.344242] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[69370.344245] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[69370.344247] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[69370.344249] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[69370.344251] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[69370.344254] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[69370.344256] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[69370.642828] sd 5:0:0:0: [sdb] No Caching mode page present
>[69370.642834] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[71590.009058] usb 4-2: new low-speed USB device number 14 using uhci_hcd
>[71590.168103] usb 4-2: New USB device found, idVendor=2188, idProduct=0ae1
>[71590.168113] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[71590.168120] usb 4-2: Product:  USB OPTICAL MOUSE
>[71590.186818] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input18
>[71590.187186] hid-generic 0003:2188:0AE1.0009: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
>[73172.142044] type=1400 audit(1355418897.883:4): avc:  denied  { read } for  pid=32621 comm="pool" name="/" dev="sdb1" ino=2 scontext=unconfined_u:unconfined_r:mozilla_plugin_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=dir
>[73172.147593] type=1400 audit(1355418897.889:5): avc:  denied  { getattr } for  pid=32621 comm="pool" path=2F72756E2F6D656469612F4A4F53454C5549532F566F6C756D656E206E7565766F2F4D69636861656C5F4A61636B736F6E5F546872696C6C65725F70747261636B696E672E666C76 dev="sdb1" ino=191 scontext=unconfined_u:unconfined_r:mozilla_plugin_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:file_t:s0 tclass=file
>[73172.147791] type=1400 audit(1355418897.889:6): avc:  denied  { getattr } for  pid=32621 comm="pool" path=2F72756E2F6D656469612F4A4F53454C5549532F566F6C756D656E206E7565766F2F566963656E7465206665726E616E64657A202041206D69206D616E657261204B6172616F6B656D70672E617669 dev="sdb1" ino=1044 scontext=unconfined_u:unconfined_r:mozilla_plugin_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
>[73172.147942] type=1400 audit(1355418897.889:7): avc:  denied  { read } for  pid=32621 comm="pool" name="prueba_ruben" dev="sdb1" ino=1049 scontext=unconfined_u:unconfined_r:mozilla_plugin_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
>[73172.147977] type=1400 audit(1355418897.889:8): avc:  denied  { open } for  pid=32621 comm="pool" path=2F72756E2F6D656469612F4A4F53454C5549532F566F6C756D656E206E7565766F2F7072756562615F727562656E dev="sdb1" ino=1049 scontext=unconfined_u:unconfined_r:mozilla_plugin_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
>[73172.148323] type=1400 audit(1355418897.890:9): avc:  denied  { read } for  pid=32621 comm="pool" name="file.aspx" dev="sdb1" ino=1089 scontext=unconfined_u:unconfined_r:mozilla_plugin_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:file_t:s0 tclass=file
>[73172.148358] type=1400 audit(1355418897.890:10): avc:  denied  { open } for  pid=32621 comm="pool" path=2F72756E2F6D656469612F4A4F53454C5549532F566F6C756D656E206E7565766F2F66696C652E61737078 dev="sdb1" ino=1089 scontext=unconfined_u:unconfined_r:mozilla_plugin_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:file_t:s0 tclass=file
>[73193.178986] type=1400 audit(1355418918.920:11): avc:  denied  { write } for  pid=32521 comm="acroread" name="/" dev="sdb1" ino=2 scontext=unconfined_u:unconfined_r:mozilla_plugin_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=dir
>[73193.179100] type=1400 audit(1355418918.920:12): avc:  denied  { add_name } for  pid=32521 comm="acroread" name="clinicas_colima.pdf" scontext=unconfined_u:unconfined_r:mozilla_plugin_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=dir
>[73193.179267] type=1400 audit(1355418918.921:13): avc:  denied  { create } for  pid=32521 comm="acroread" name="clinicas_colima.pdf" scontext=unconfined_u:unconfined_r:mozilla_plugin_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:file_t:s0 tclass=file
>[73193.181593] type=1400 audit(1355418918.923:14): avc:  denied  { write } for  pid=32521 comm="acroread" path=2F72756E2F6D656469612F4A4F53454C5549532F566F6C756D656E206E7565766F2F636C696E696361735F636F6C696D612E706466 dev="sdb1" ino=446 scontext=unconfined_u:unconfined_r:mozilla_plugin_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:file_t:s0 tclass=file
>[85782.877088] usb 4-2: USB disconnect, device number 14
>[86807.520046] EXT4-fs (sdb1): error count: 1
>[86807.520057] EXT4-fs (sdb1): initial error at 1348664344: __ext4_get_inode_loc:3561: inode 1049: block 334
>[86807.520070] EXT4-fs (sdb1): last error at 1348664344: __ext4_get_inode_loc:3561: inode 1049: block 334
>[87435.309923] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[88505.599081] usb 4-2: new low-speed USB device number 15 using uhci_hcd
>[88505.756137] usb 4-2: New USB device found, idVendor=2188, idProduct=0ae1
>[88505.756147] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[88505.756155] usb 4-2: Product:  USB OPTICAL MOUSE
>[88505.775826] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input19
>[88505.776233] hid-generic 0003:2188:0AE1.000A: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
>[93733.511838] wlan0: deauthenticating from b8:a3:86:bc:24:2a by local choice (reason=3)
>[93733.547813] cfg80211: Calling CRDA to update world regulatory domain
>[93733.776402] sky2 0000:30:00.0: eth0: disabling interface
>[93733.865155] cfg80211: World regulatory domain updated:
>[93733.865160] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[93733.865164] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[93733.865170] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[93733.865173] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[93733.865175] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[93733.865178] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[93733.865191] cfg80211: Calling CRDA for country: MX
>[93733.868601] cfg80211: Regulatory domain changed to country: MX
>[93733.868606] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[93733.868609] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[93733.868612] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[93733.868615] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[93733.868617] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[93739.507359] PM: Syncing filesystems ... done.
>[93739.797397] PM: Preparing system for mem sleep
>[93740.033278] Freezing user space processes ... (elapsed 0.04 seconds) done.
>[93740.077152] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[93740.088136] PM: Entering mem sleep
>[93740.088164] Suspending console(s) (use no_console_suspend to debug)
>[93740.088592] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[93740.105242] sd 0:0:0:0: [sda] Stopping disk
>[93740.352727] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[93740.622105] PM: suspend of devices complete after 533.723 msecs
>[93740.622262] PM: late suspend of devices complete after 0.153 msecs
>[93740.784162] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[93740.795120] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[93740.795206] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[93740.795292] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[93740.795526] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[93740.806113] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[93740.806165] PM: noirq suspend of devices complete after 183.900 msecs
>[93740.806381] ACPI: Preparing to enter system sleep state S3
>[93740.806477] PM: Saving platform NVS memory
>[93740.806631] Disabling non-boot CPUs ...
>[93740.807955] smpboot: CPU 1 is now offline
>[93740.808451] CPU 1 offline: Remove Rx thread
>[93740.808557] Extended CMOS year: 2000
>[93740.808557] ACPI: Low-level resume complete
>[93740.808557] PM: Restoring platform NVS memory
>[93740.808557] Extended CMOS year: 2000
>[93740.808557] CPU0: Thermal monitoring handled by SMI
>[93740.808557] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[93740.808557] Enabling non-boot CPUs ...
>[93740.809112] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[93740.807825] Initializing CPU#1
>[93740.807825] CPU1: Thermal monitoring handled by SMI
>[93740.821475] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[93740.821479] bnx2i: CPU 1 online: Create Rx thread
>[93740.822024] CPU1 is up
>[93740.823389] ACPI: Waking up from system sleep state S3
>[93740.883137] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[93740.894080] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[93740.900033] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[93740.911484] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[93740.911548] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[93740.911610] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[93740.922078] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[93741.095310] PM: noirq resume of devices complete after 223.173 msecs
>[93741.095431] PM: early resume of devices complete after 0.084 msecs
>[93741.095460] i915 0000:00:02.0: setting latency timer to 64
>[93741.096101] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[93741.096817] usb usb3: root hub lost power or was reset
>[93741.097689] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[93741.100138] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[93741.100166] usb usb4: root hub lost power or was reset
>[93741.100183] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[93741.100212] usb usb5: root hub lost power or was reset
>[93741.100227] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[93741.100257] usb usb6: root hub lost power or was reset
>[93741.100275] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[93741.100300] pci 0000:00:1e.0: setting latency timer to 64
>[93741.100313] ata_piix 0000:00:1f.1: setting latency timer to 64
>[93741.100325] ahci 0000:00:1f.2: setting latency timer to 64
>[93741.100774] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[93741.102328] ata5: port disabled--ignoring
>[93741.346054] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[93741.405072] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[93741.408075] ata2: SATA link down (SStatus 0 SControl 300)
>[93741.413512] ata3.00: configured for UDMA/100
>[93741.712077] usb 4-2: reset low-speed USB device number 15 using uhci_hcd
>[93742.092089] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[93742.226565] btusb 3-1:1.0: no reset_resume for driver btusb?
>[93742.226567] btusb 3-1:1.1: no reset_resume for driver btusb?
>[93743.088094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[93743.090417] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[93743.090419] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[93743.093256] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[93743.093259] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[93743.097196] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[93743.097198] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>[93743.097461] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>[93743.097463] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[93743.098808] ata1.00: configured for UDMA/100
>[93743.098855] sd 0:0:0:0: [sda] Starting disk
>[93743.277468] PM: resume of devices complete after 2182.033 msecs
>[93743.278030] PM: Finishing wakeup.
>[93743.278032] Restarting tasks ... done.
>[93743.327897] video LNXVIDEO:00: Restoring backlight state
>[93743.524230] iwlwifi 0000:10:00.0: L1 Enabled; Disabling L0S
>[93743.527352] iwlwifi 0000:10:00.0: Radio type=0x1-0x2-0x0
>[93743.572090] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[93743.577524] sky2 0000:30:00.0: eth0: enabling interface
>[93743.577899] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[93747.366178] wlan0: authenticate with b8:a3:86:bc:24:2a
>[93747.369464] wlan0: send auth to b8:a3:86:bc:24:2a (try 1/3)
>[93747.371331] wlan0: authenticated
>[93747.372052] wlan0: associate with b8:a3:86:bc:24:2a (try 1/3)
>[93747.376157] wlan0: RX AssocResp from b8:a3:86:bc:24:2a (capab=0x411 status=0 aid=1)
>[93747.381740] wlan0: associated
>[93747.381801] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[93747.381945] cfg80211: Calling CRDA for country: US
>[93747.421520] cfg80211: Regulatory domain changed to country: US
>[93747.421524] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[93747.421527] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[93747.421529] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[93747.421532] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[93747.421534] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[93747.421536] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[93747.421538] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[93747.500868] sd 5:0:0:0: [sdb] No Caching mode page present
>[93747.500876] sd 5:0:0:0: [sdb] Assuming drive cache: write through
>[95298.706701] midori[4260]: segfault at 20000c ip b530a3a4 sp bfa26d9c error 6 in libwebkitgtk-1.0.so.0.13.4[b5188000+187a000]

Actions: View

Attachments on bug 887056: 663268 | 663269 | 663270 | 663271 | 663272 | 663273