Attachment 668768 Details for Bug 890111 – guest kernel log when do S4.

guest kernel log when do S4.

guest kernel log when do S4.txt (text/plain), 19.63 KB, created by Sibiao Luo on 2012-12-25 07:50:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sibiao Luo

Created: 2012-12-25 07:50:40 UTC

Size: 19.63 KB

patch

obsolete

># nc -U /tmp/ttyS0 
>PM: Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Preallocating image memory... done (allocated 377248 pages)
>PM: Allocated 1508992 kbytes in 0.25 seconds (6035.96 MB/s)
>Suspending console(s) (use no_console_suspend to debug)
>virtio-pci 0000:00:07.0: PCI INT A disabled
>virtio-pci 0000:00:06.0: PCI INT A disabled
>virtio-pci 0000:00:05.0: PCI INT A disabled
>sd 2:0:0:0: [sda] Synchronizing SCSI cache
>virtio-pci 0000:00:09.0: PCI INT A disabled
>virtio-pci 0000:00:08.0: PCI INT A disabled
>virtio-pci 0000:00:04.0: PCI INT A disabled
>virtio-pci 0000:00:03.0: PCI INT A disabled
>ACPI: Preparing to enter system sleep state S4
>PM: Saving platform NVS memory
>Disabling non-boot CPUs ...
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>PM: Creating hibernation image: 
>PM: Need to copy 128874 pages
>PM: Hibernation image created (128874 pages copied)
>kvm-clock: cpu 0, msr 0:2216681, primary cpu clock, resume
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting Node 0 Processor 1 APIC 0x1
>kvm-clock: cpu 1, msr 0:2316681, secondary cpu clock
>Disabled fast string operations
>kvm-stealtime: cpu 1, msr 230e840
>CPU1 is up
>ACPI: Waking up from system sleep state S4
>virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
>virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
>virtio-pci 0000:00:08.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
>virtio-pci 0000:00:09.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
>virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
>virtio-pci 0000:00:07.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
>ata2.00: configured for MWDMA2
>PM: Saving image data pages (129126 pages) ... done
>PM: Wrote 516504 kbytes in 10.19 seconds (50.68 MB/s)
>PM: S|
>Suspending console(s) (use no_console_suspend to debug)
>
>
>
>
>
># nc -U /tmp/ttyS0 
>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.32-351.el6.x86_64 (mockbuild@x86-003.build.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Thu Dec 20 16:13:16 EST 2012
>Command line: ro root=/dev/mapper/vg_sluo-lv_root rd_NO_LUKS rd_LVM_LV=vg_sluo/lv_swap LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=vg_sluo/lv_root SYSFONT=latarcyrheb-sun16 crashkernel=128M  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb console=tty0 console=ttyS0,115200
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>Disabled fast string operations
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
> BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fffd000 (usable)
> BIOS-e820: 000000007fffd000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>SMBIOS version 2.4 @ 0xFD9E0
>last_pfn = 0x7fffd max_arch_pfn = 0x400000000
>x86 PAT enabled: cpu 0, old 0x70106, new 0x7010600070106
>init_memory_mapping: 0000000000000000-000000007fffd000
>RAMDISK: 37023000 - 37fef6ac
>ACPI: RSDP 00000000000fd9b0 00014 (v00 BOCHS )
>ACPI: RSDT 000000007fffd640 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
>ACPI: FACP 000000007ffffe20 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
>ACPI: DSDT 000000007fffd8c0 024F1 (v01   BXPC   BXDSDT 00000001 INTL 20090123)
>ACPI: FACS 000000007ffffdc0 00040
>ACPI: SSDT 000000007fffd7c0 000FF (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
>ACPI: APIC 000000007fffd6d0 00080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
>ACPI: SSDT 000000007fffd680 0004E (v01   BXPC BXSSDTPC 00000001 INTL 20090123)
>Setting APIC routing to flat.
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fffd000
>Bootmem setup node 0 0000000000000000-000000007fffd000
>  NODE_DATA [000000000000a000 - 000000000003dfff]
>  bootmap [000000000003e000 -  000000000004dfff] pages 10
>(7 early reservations) ==> bootmem [0000000000 - 007fffd000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 000201c8e4]    TEXT DATA BSS ==> [0001000000 - 000201c8e4]
>  #3 [0037023000 - 0037fef6ac]          RAMDISK ==> [0037023000 - 0037fef6ac]
>  #4 [000009bc00 - 0000100000]    BIOS reserved ==> [000009bc00 - 0000100000]
>  #5 [000201d000 - 000201d081]              BRK ==> [000201d000 - 000201d081]
>  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
>found SMP MP-table at [ffff8800000fda00] fda00
>Reserving 128MB of memory at 48MB for crashkernel (System RAM: 2047MB)
>kvm-clock: Using msrs 4b564d01 and 4b564d00
>kvm-clock: cpu 0, msr 0:1c25681, boot clock
>Zone PFN ranges:
>  DMA      0x00000001 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000001 -> 0x0000009b
>    0: 0x00000100 -> 0x0007fffd
>ACPI: PM-Timer IO Port: 0xb008
>Setting APIC routing to flat.
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009b000 - 000000000009c000
>PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:7ffbc000)
>Booting paravirtualized kernel on KVM
>NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 31 pages/cpu @ffff880002200000 s94552 r8192 d24232 u1048576
>pcpu-alloc: s94552 r8192 d24232 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>kvm-clock: cpu 0, msr 0:2216681, primary cpu clock
>kvm-stealtime: cpu 0, msr 220e840
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516910
>Policy zone: DMA32
>Kernel command line: ro root=/dev/mapper/vg_sluo-lv_root rd_NO_LUKS rd_LVM_LV=vg_sluo/lv_swap LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=vg_sluo/lv_root SYSFONT=latarcyrheb-sun16 crashkernel=128M  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb console=tty0 console=ttyS0,115200
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>Memory: 1903552k/2097140k available (5219k kernel code, 408k absent, 193180k reserved, 7122k data, 1264k init)
>Hierarchical RCU implementation.
>NR_IRQS:33024 nr_irqs:424
>Console: colour VGA+ 80x25
>console [tty0] enabled
>console [ttyS0] enabled
>allocated 8388608 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Detected 2666.760 MHz processor.
>Calibrating delay loop (skipped) preset value.. 5333.52 BogoMIPS (lpj=2666760)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>SELinux:  Initializing.
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>Initializing cgroup subsys perf_event
>Initializing cgroup subsys net_prio
>Disabled fast string operations
>mce: CPU supports 10 MCE banks
>alternatives: switching to unfair spinlock
>ACPI: Core revision 20090903
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 21428 entries in 85 pages
>Enabling x2apic
>Enabled x2apic
>Setting APIC routing to physical x2apic
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) stepping 01
>Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
>NMI watchdog disabled (cpu0): hardware events not enabled
>Booting Node   0, Processors  #1 Ok.
>kvm-clock: cpu 1, msr 0:2316681, secondary cpu clock
>Disabled fast string operations
>kvm-stealtime: cpu 1, msr 230e840
>Brought up 2 CPUs
>Total of 2 processors activated (10667.04 BogoMIPS).
>devtmpfs: initialized
>regulator: core version 0.5
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
>pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
>ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:02.0
>SCSI subsystem initialized
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Switching to clocksource kvm-clock
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 7 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:00:02.0: BAR 1: assigned [mem 0x80000000-0x83ffffff]
>pci 0000:00:02.0: BAR 1: set to [mem 0x80000000-0x83ffffff] (PCI address [0x80000000-0x83ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>pci 0000:00:01.0: PIIX3: Enabling Passive Release
>pci 0000:00:01.0: Activating ISA DMA hang workarounds
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
>pci 0000:00:01.2: PCI INT D disabled
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>pci 0000:00:10.0: PCI INT D -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
>pci 0000:00:10.0: PCI INT D disabled
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 16177k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1356419113.516:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 3749
>alg: No test for stdrng (krng)
>ksign: Installing public key data
>Loading keyring
>- Added public key EF50BFAFB089A7B6
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>- Added public key D4A26C9CCD09BEDA
>- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>acpiphp: Slot [1] registered
>acpiphp: Slot [2] registered
>acpiphp: Slot [3] registered
>acpiphp: Slot [4] registered
>acpiphp: Slot [5] registered
>acpiphp: Slot [6] registered
>acpiphp: Slot [7] registered
>acpiphp: Slot [8] registered
>acpiphp: Slot [9] registered
>acpiphp: Slot [10] registered
>acpiphp: Slot [11] registered
>acpiphp: Slot [12] registered
>acpiphp: Slot [13] registered
>acpiphp: Slot [14] registered
>acpiphp: Slot [15] registered
>acpiphp: Slot [16] registered
>acpiphp: Slot [17] registered
>acpiphp: Slot [18] registered
>acpiphp: Slot [19] registered
>acpiphp: Slot [20] registered
>acpiphp: Slot [21] registered
>acpiphp: Slot [22] registered
>acpiphp: Slot [23] registered
>acpiphp: Slot [24] registered
>acpiphp: Slot [25] registered
>acpiphp: Slot [26] registered
>acpiphp: Slot [27] registered
>acpiphp: Slot [28] registered
>acpiphp: Slot [29] registered
>acpiphp: Slot [30] registered
>acpiphp: Slot [31] registered
>ipmi message handler version 39.2
>IPMI System Interface driver.
>ipmi_si: Adding default-specified kcs state machine
>ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
>ipmi_si: Interface detection failed
>ipmi_si: Adding default-specified smic state machine
>ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
>ipmi_si: Interface detection failed
>ipmi_si: Adding default-specified bt state machine
>ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
>ipmi_si: Interface detection failed
>ipmi_si: Unable to find any System Interface(s)
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>ERST: Table is not found!
>GHES: HEST is not enabled!
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>crash memory driver: version 1.1
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>ï¿½serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input1
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:10.0: PCI INT D -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
>ehci_hcd 0000:00:10.0: EHCI Host Controller
>ehci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.0: irq 10, io mem 0xf40a0000
>ehci_hcd 0000:00:10.0: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32-351.el6.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:10.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
>uhci_hcd 0000:00:01.2: UHCI Host Controller
>uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.32-351.el6.x86_64 uhci_hcd
>usb usb2: SerialNumber: 0000:00:01.2
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:01: RTC can wake from S4
>rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day, 114 bytes nvram
>cpuidle: using governor ladder
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>rtc_cmos 00:01: setting system clock to 2012-12-25 15:05:13 UTC (1356447913)
>Initalizing network drop monitor service
>Freeing unused kernel memory: 1264k freed
>Write protecting the kernel read-only data: 10240k
>Freeing unused kernel memory: 904k freed
>Freeing unused kernel memory: 1676k freed
>dracut: dracut-004-302.el6
>dracut: rd_NO_LUKS: removing cryptoluks activation
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.22.7-ioctl (2012-06-01) initialised: dm-devel@redhat.com
>udev: starting version 147
>dracut: Starting plymouth daemon
>dracut: rd_NO_DM: removing DM RAID activation
>dracut: rd_NO_MD: removing MD RAID activation
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
>ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
>usb 2-1: new full speed USB device number 2 using uhci_hcd
>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
>ata2.00: ATAPI: QEMU DVD-ROM, 0.12.1, max UDMA/100
>ata2.00: configured for MWDMA2
>scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     0.12 PQ: 0 ANSI: 5
>Refined TSC clocksource calibration: 2666.763 MHz.
>virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
>virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
>virtio-pci 0000:00:08.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
>virtio-pci 0000:00:09.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
>sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
>Uniform CD-ROM driver Revision: 3.20
> vda: vda1 vda2
>scsi2 : Virtio SCSI HBA
>scsi 2:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: unknown partition table
>sd 2:0:0:0: [sda] Attached SCSI disk
>usb 2-1: New USB device found, idVendor=0627, idProduct=0001
>usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
>usb 2-1: Product: QEMU USB Tablet
>usb 2-1: Manufacturer: QEMU 0.12.1
>usb 2-1: SerialNumber: 42
>usb 2-1: configuration #1 chosen from 1 choice
>input: QEMU 0.12.1 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb2/2-1/2-1:1.0/input/input4
>generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.12.1 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
>dracut: Scanning devices vda2  for LVM logical volumes vg_sluo/lv_swap vg_sluo/lv_root 
>dracut: inactive '/dev/vg_sluo/lv_root' [15.57 GiB] inherit
>dracut: inactive '/dev/vg_sluo/lv_swap' [3.94 GiB] inherit
>PM: Starting manual resume from disk
>Freezing user space processes ... 
>EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
>EXT4-fs (dm-0): write access will be enabled during recovery
>EXT4-fs (dm-0): recovery complete
>EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: 
>(elapsed 0.29 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Loading image data pages (129126 pages) ... done
>PM: Read 516504 kbytes in 10.12 seconds (51.03 MB/s)
>Suspending console(s) (use no_console_suspend to debug)
>

Actions: View

Attachments on bug 890111: 668766 | 668768