Attachment 669009 Details for Bug 890220 – File: dmesg

File: dmesg

dmesg (text/plain), 133.20 KB, created by jnikyliak on 2012-12-25 21:14:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: jnikyliak

Created: 2012-12-25 21:14:58 UTC

Size: 133.20 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 3.6.10-2.fc17.i686 (mockbuild@) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #1 SMP Tue Dec 11 18:33:15 UTC 2012
>[    0.000000] Disabled fast string operations
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000e3fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f6dffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000001f6e0000-0x000000001f6fffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000001f700000-0x000000001fffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>[    0.000000] DMI present.
>[    0.000000] DMI: LENOVO 892228S/CAPELL VALLEY(NAPA) CRB, BIOS 63ET58WW 12/19/06
>[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x1f6e0 max_arch_pfn = 0x100000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CFFFF write-protect
>[    0.000000]   D0000-DFFFF uncachable
>[    0.000000]   E0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask FE0000000 write-back
>[    0.000000]   1 base 01F700000 mask FFFF00000 uncachable
>[    0.000000]   2 base 01F800000 mask FFF800000 uncachable
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] PAT not supported by CPU.
>[    0.000000] original variable MTRRs
>[    0.000000] reg 0, base: 0GB, range: 512MB, type WB
>[    0.000000] reg 1, base: 503MB, range: 1MB, type UC
>[    0.000000] reg 2, base: 504MB, range: 8MB, type UC
>[    0.000000] total RAM covered: 503M
>[    0.000000] Found optimal setting for mtrr clean up
>[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
>[    0.000000] New variable MTRRs
>[    0.000000] reg 0, base: 0GB, range: 512MB, type WB
>[    0.000000] reg 1, base: 503MB, range: 1MB, type UC
>[    0.000000] reg 2, base: 504MB, range: 8MB, type UC
>[    0.000000] found SMP MP-table at [mem 0x000f6790-0x000f679f] mapped at [c00f6790]
>[    0.000000] initial memory mapped: [mem 0x00000000-0x00ffffff]
>[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x1f6dffff]
>[    0.000000]  [mem 0x00000000-0x003fffff] page 4k
>[    0.000000]  [mem 0x00400000-0x1f3fffff] page 2M
>[    0.000000]  [mem 0x1f400000-0x1f6dffff] page 4k
>[    0.000000] kernel direct mapping tables up to 0x1f6dffff @ [mem 0x00ff9000-0x00ffffff]
>[    0.000000] RAMDISK: [mem 0x1d7cb000-0x1e87bfff]
>[    0.000000] ACPI: RSDP 000f6710 00024 (v02 LENOVO)
>[    0.000000] ACPI: XSDT 1f6e7c07 00094 (v01 LENOVO TP-63    00000058  LTP 00000000)
>[    0.000000] ACPI: FACP 1f6edbd2 000F4 (v03 INTEL  TP-63    00000058 ALAN 00000001)
>[    0.000000] ACPI: DSDT 1f6e95cb 04593 (v01 LENOVO TP-63    00000058 INTL 20060608)
>[    0.000000] ACPI: FACS 1f6eefc0 00040
>[    0.000000] ACPI: APIC 1f6edcc6 00068 (v01 INTEL  TP-63    00000058 LOHR 0000005A)
>[    0.000000] ACPI: HPET 1f6edd2e 00038 (v01 INTEL  TP-63    00000058 LOHR 0000005A)
>[    0.000000] ACPI: MCFG 1f6edd66 0003C (v01 INTEL  TP-63    00000058 LOHR 0000005A)
>[    0.000000] ACPI: TCPA 1f6edda2 00032 (v01 Phoeni TP-63    00000058  TL  00000000)
>[    0.000000] ACPI: SLIC 1f6eddd4 00176 (v01 LENOVO TP-63    00000058 TBD  00000001)
>[    0.000000] ACPI: DBGP 1f6edf4a 00034 (v01 LENOVO TP-63    00000058 LOHR 00000000)
>[    0.000000] ACPI: APIC 1f6edf7e 0005A (v01 PTLTD  TP-63    00000058  LTP 00000000)
>[    0.000000] ACPI: BOOT 1f6edfd8 00028 (v01 PTLTD  TP-63    00000058  LTP 00000001)
>[    0.000000] ACPI: SSDT 1f6e8f7c 0064F (v01 SataRe  SataPri 00001000 INTL 20050624)
>[    0.000000] ACPI: SSDT 1f6e88ea 00692 (v01 SataRe  SataSec 00001000 INTL 20050624)
>[    0.000000] ACPI: SSDT 1f6e8402 004E8 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>[    0.000000] ACPI: SSDT 1f6e81a3 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
>[    0.000000] ACPI: SSDT 1f6e7c9b 00508 (v01  PmRef    CpuPm 00003000 INTL 20050624)
>[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
>[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 0MB HIGHMEM available.
>[    0.000000] 502MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 1f6e0000
>[    0.000000]   low ram: 0 - 1f6e0000
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
>[    0.000000]   Normal   [mem 0x01000000-0x1f6dffff]
>[    0.000000]   HighMem  empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0x1f6dffff]
>[    0.000000] On node 0 totalpages: 128623
>[    0.000000] free_area_init_node: node 0, pgdat c0be69c0, node_mem_map df2ef200
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
>[    0.000000]   Normal zone: 974 pages used for memmap
>[    0.000000]   Normal zone: 123666 pages, LIFO batch:31
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e4000
>[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 00000000000e8000
>[    0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
>[    0.000000] e820: [mem 0x20000000-0xdfffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 13 pages/cpu @df2d0000 s32256 r0 d20992 u53248
>[    0.000000] pcpu-alloc: s32256 r0 d20992 u53248 alloc=13*4096
>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127617
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.6.10-2.fc17.i686 root=/dev/mapper/vg_edk-lv_root ro rd.md=0 rd.dm=0 rd.lvm.lv=vg_edk/lv_swap SYSFONT=True rd.lvm.lv=vg_edk/lv_root rd.luks=0 LANG=es_ES.UTF-8 KEYTABLE=es rhgb quiet
>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>[    0.000000] __ex_table already sorted, skipping sort
>[    0.000000] Initializing CPU#0
>[    0.000000] allocated 1029760 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
>[    0.000000] Memory: 481980k/514944k available (5492k kernel code, 32512k reserved, 2689k data, 628k init, 0k highmem)
>[    0.000000] virtual kernel memory layout:
>[    0.000000]     fixmap  : 0xffa96000 - 0xfffff000   (5540 kB)
>[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>[    0.000000]     vmalloc : 0xdfee0000 - 0xff3fe000   ( 501 MB)
>[    0.000000]     lowmem  : 0xc0000000 - 0xdf6e0000   ( 502 MB)
>[    0.000000]       .init : 0xc0bfe000 - 0xc0c9b000   ( 628 kB)
>[    0.000000]       .data : 0xc095d16d - 0xc0bfd5c0   (2689 kB)
>[    0.000000]       .text : 0xc0400000 - 0xc095d16d   (5492 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
>[    0.000000] NR_IRQS:2304 nr_irqs:512 16
>[    0.000000] CPU 0 irqstacks, hard=dec08000 soft=dec0a000
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1595.915 MHz processor
>[    0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.83 BogoMIPS (lpj=1595915)
>[    0.001007] pid_max: default: 32768 minimum: 301
>[    0.001053] Security Framework initialized
>[    0.001065] SELinux:  Initializing.
>[    0.001077] SELinux:  Starting in permissive mode
>[    0.001153] Mount-cache hash table entries: 512
>[    0.002007] Initializing cgroup subsys cpuacct
>[    0.002011] Initializing cgroup subsys memory
>[    0.002023] Initializing cgroup subsys devices
>[    0.002025] Initializing cgroup subsys freezer
>[    0.002028] Initializing cgroup subsys net_cls
>[    0.002031] Initializing cgroup subsys blkio
>[    0.002034] Initializing cgroup subsys perf_event
>[    0.002073] Disabled fast string operations
>[    0.002080] mce: CPU supports 6 MCE banks
>[    0.002091] CPU0: Thermal monitoring handled by SMI
>[    0.002095] process: using mwait in idle threads
>[    0.002107] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
>[    0.002107] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
>[    0.002107] tlb_flushall_shift is 0x6
>[    0.002216] SMP alternatives: switching to UP code
>[    0.010271] ACPI: Core revision 20120711
>[    0.015011] ftrace: allocating 22691 entries in 45 pages
>[    0.025096] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.025569] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.035909] smpboot: CPU0: Intel(R) Celeron(R) M CPU        420  @ 1.60GHz stepping 08
>[    0.035994] Performance Events: Core events, core PMU driver.
>[    0.035994] ... version:                1
>[    0.035994] ... bit width:              40
>[    0.035994] ... generic registers:      2
>[    0.035994] ... value mask:             000000ffffffffff
>[    0.035994] ... max period:             000000007fffffff
>[    0.035994] ... fixed-purpose events:   0
>[    0.035994] ... event mask:             0000000000000003
>[    0.036111] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.036183] Brought up 1 CPUs
>[    0.036187] smpboot: Total of 1 processors activated (3191.83 BogoMIPS)
>[    0.037071] devtmpfs: initialized
>[    0.037698] PM: Registering ACPI NVS region [mem 0x1f6e0000-0x1f6fffff] (131072 bytes)
>[    0.039148] atomic64 test passed for i586+ platform with CX8 and with SSE
>[    0.039188] RTC time: 14:07:39, date: 12/25/12
>[    0.039261] NET: Registered protocol family 16
>[    0.039815] ACPI: bus type pci registered
>[    0.039897] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.039902] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.039904] PCI: Using MMCONFIG for extended config space
>[    0.039906] PCI: Using configuration type 1 for base access
>[    0.041657] bio: create slab <bio-0> at 0
>[    0.041999] ACPI: Added _OSI(Module Device)
>[    0.042003] ACPI: Added _OSI(Processor Device)
>[    0.042006] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.042008] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.043527] ACPI: EC: Look up EC in DSDT
>[    0.046013] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.054041] ACPI: EC: GPE storm detected, transactions will use polling mode
>[    0.108005] ACPI: Interpreter enabled
>[    0.108015] ACPI: (supports S0 S3 S4 S5)
>[    0.108039] ACPI: Using IOAPIC for interrupt routing
>[    0.151899] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
>[    0.152064] ACPI: No dock devices found.
>[    0.152072] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>[    0.152446] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.153145] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>[    0.153150] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>[    0.153154] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>[    0.153158] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
>[    0.153161] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
>[    0.153165] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
>[    0.153169] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
>[    0.153173] pci_root PNP0A08:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
>[    0.153176] PCI: root bus 00: using default resources
>[    0.153219] PCI host bridge to bus 0000:00
>[    0.153224] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
>[    0.153228] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.153231] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>[    0.153235] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
>[    0.153250] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
>[    0.153311] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
>[    0.153326] pci 0000:00:02.0: reg 10: [mem 0xd0200000-0xd027ffff]
>[    0.153334] pci 0000:00:02.0: reg 14: [io  0x1800-0x1807]
>[    0.153343] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
>[    0.153351] pci 0000:00:02.0: reg 1c: [mem 0xd0300000-0xd033ffff]
>[    0.153402] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
>[    0.153414] pci 0000:00:02.1: reg 10: [mem 0xd0280000-0xd02fffff]
>[    0.153531] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
>[    0.153556] pci 0000:00:1b.0: reg 10: [mem 0xd0340000-0xd0343fff 64bit]
>[    0.153667] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.153702] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
>[    0.153819] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.153857] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
>[    0.153974] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.154020] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
>[    0.154080] pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
>[    0.154126] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
>[    0.154186] pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
>[    0.154233] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
>[    0.154292] pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
>[    0.154339] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
>[    0.154398] pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
>[    0.154457] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
>[    0.154484] pci 0000:00:1d.7: reg 10: [mem 0xd0544000-0xd05443ff]
>[    0.154597] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.154627] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.154731] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
>[    0.154850] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
>[    0.154857] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
>[    0.154863] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1670 (mask 0003)
>[    0.154869] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 007f)
>[    0.154876] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at ff2c (mask 0003)
>[    0.154945] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
>[    0.154968] pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
>[    0.154989] pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
>[    0.155003] pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
>[    0.155016] pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
>[    0.155030] pci 0000:00:1f.2: reg 20: [io  0x18b0-0x18bf]
>[    0.155091] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.155114] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
>[    0.155191] pci 0000:00:1f.3: reg 20: [io  0x18c0-0x18df]
>[    0.155305] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
>[    0.155311] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.155386] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
>[    0.155469] pci 0000:03:00.0: [14e4:4311] type 00 class 0x028000
>[    0.155537] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xd0003fff]
>[    0.156031] pci 0000:03:00.0: supports D1 D2
>[    0.156116] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.156143] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.156153] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd00fffff]
>[    0.156194] pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 00-ff]
>[    0.156215] pci 0000:05:01.0: [10ec:8139] type 00 class 0x020000
>[    0.156243] pci 0000:05:01.0: reg 10: [io  0x2000-0x20ff]
>[    0.156259] pci 0000:05:01.0: reg 14: [mem 0xd0100000-0xd01000ff]
>[    0.156365] pci 0000:05:01.0: supports D1 D2
>[    0.156368] pci 0000:05:01.0: PME# supported from D1 D2 D3hot D3cold
>[    0.156403] pci 0000:05:04.0: [1524:1410] type 02 class 0x060700
>[    0.156431] pci 0000:05:04.0: reg 10: [mem 0x00000000-0x00000fff]
>[    0.156477] pci 0000:05:04.0: supports D1 D2
>[    0.156480] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.156511] pci 0000:05:06.0: [1180:0832] type 00 class 0x0c0010
>[    0.156529] pci 0000:05:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[    0.156532] pci 0000:05:06.0: MMC cards are now supported by standard SDHCI controller
>[    0.156550] pci 0000:05:06.0: reg 10: [mem 0xd0100800-0xd0100fff]
>[    0.156655] pci 0000:05:06.0: supports D1 D2
>[    0.156658] pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.156685] pci 0000:05:06.1: [1180:0822] type 00 class 0x080500
>[    0.156710] pci 0000:05:06.1: reg 10: [mem 0xd0100400-0xd01004ff]
>[    0.156815] pci 0000:05:06.1: supports D1 D2
>[    0.156818] pci 0000:05:06.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.156845] pci 0000:05:06.2: [1180:0592] type 00 class 0x088000
>[    0.156869] pci 0000:05:06.2: reg 10: [mem 0xd0101400-0xd01014ff]
>[    0.156981] pci 0000:05:06.2: supports D1 D2
>[    0.156984] pci 0000:05:06.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.157012] pci 0000:05:06.3: [1180:0852] type 00 class 0x088000
>[    0.157036] pci 0000:05:06.3: reg 10: [mem 0xd0101800-0xd01018ff]
>[    0.157140] pci 0000:05:06.3: supports D1 D2
>[    0.157144] pci 0000:05:06.3: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.157212] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
>[    0.157219] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
>[    0.157225] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd01fffff]
>[    0.157235] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>[    0.157238] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>[    0.157244] pci 0000:05:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>[    0.157294] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 05] (conflicts with (null) [bus 05])
>[    0.157301] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
>[    0.157305] pci_bus 0000:06: busn_res: can not insert [bus 06-09] under [bus 05] (conflicts with (null) [bus 05])
>[    0.157312] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05]
>[    0.157337] pci_bus 0000:00: on NUMA node 0
>[    0.157341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.157542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>[    0.157603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>[    0.157685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>[    0.157758]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
>[    0.157761]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
>[    0.161940] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.162015] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>[    0.162080] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>[    0.162145] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>[    0.162209] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>[    0.162274] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>[    0.162338] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>[    0.162403] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
>[    0.162519] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.162530] vgaarb: loaded
>[    0.162532] vgaarb: bridge control possible 0000:00:02.0
>[    0.162673] SCSI subsystem initialized
>[    0.162677] ACPI: bus type scsi registered
>[    0.162739] libata version 3.00 loaded.
>[    0.162772] ACPI: bus type usb registered
>[    0.162801] usbcore: registered new interface driver usbfs
>[    0.162815] usbcore: registered new interface driver hub
>[    0.162845] usbcore: registered new device driver usb
>[    0.162932] PCI: Using ACPI for IRQ routing
>[    0.174306] PCI: pci_cache_line_size set to 64 bytes
>[    0.174411] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
>[    0.174415] e820: reserve RAM buffer [mem 0x1f6e0000-0x1fffffff]
>[    0.174555] NetLabel: Initializing
>[    0.174558] NetLabel:  domain hash size = 128
>[    0.174559] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.174574] NetLabel:  unlabeled traffic allowed by default
>[    0.174785] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.174793] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.174799] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.177029] Switching to clocksource hpet
>[    0.187766] pnp: PnP ACPI init
>[    0.187795] ACPI: bus type pnp registered
>[    0.188259] pnp 00:00: [bus 00-ff]
>[    0.188264] pnp 00:00: [io  0x0000-0x0cf7 window]
>[    0.188268] pnp 00:00: [io  0x0cf8-0x0cff]
>[    0.188271] pnp 00:00: [io  0x0d00-0xffff window]
>[    0.188275] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>[    0.188278] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>[    0.188282] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>[    0.188285] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>[    0.188288] pnp 00:00: [mem 0x000cc000-0x000cffff window]
>[    0.188292] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>[    0.188295] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>[    0.188298] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>[    0.188302] pnp 00:00: [mem 0x000dc000-0x000dffff window]
>[    0.188305] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>[    0.188308] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>[    0.188312] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>[    0.188315] pnp 00:00: [mem 0x000ec000-0x000effff window]
>[    0.188322] pnp 00:00: [mem 0x000f0000-0x000fffff window]
>[    0.188326] pnp 00:00: [mem 0x20000000-0xfebfffff window]
>[    0.188329] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>[    0.188409] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>[    0.188444] pnp 00:01: [mem 0xe0000000-0xefffffff]
>[    0.188448] pnp 00:01: [mem 0xfed14000-0xfed17fff]
>[    0.188451] pnp 00:01: [mem 0xfed18000-0xfed18fff]
>[    0.188455] pnp 00:01: [mem 0xfed19000-0xfed19fff]
>[    0.188458] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
>[    0.188461] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
>[    0.188464] pnp 00:01: [mem 0xfed40000-0xfed44fff]
>[    0.188467] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
>[    0.188533] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.188537] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
>[    0.188541] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.188545] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.188549] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.188553] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.188557] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.188561] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.188566] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.188812] pnp 00:02: [io  0x0000-0x001f]
>[    0.188816] pnp 00:02: [io  0x0081-0x0091]
>[    0.188819] pnp 00:02: [io  0x0093-0x009f]
>[    0.188822] pnp 00:02: [io  0x00c0-0x00df]
>[    0.188826] pnp 00:02: [dma 4]
>[    0.188873] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.188886] pnp 00:03: [mem 0xff000000-0xffffffff]
>[    0.188926] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.189031] pnp 00:04: [mem 0xfed00000-0xfed003ff]
>[    0.189075] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.189091] pnp 00:05: [io  0x00f0]
>[    0.189109] pnp 00:05: [irq 13]
>[    0.189156] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.189173] pnp 00:06: [io  0x002e-0x002f]
>[    0.189176] pnp 00:06: [io  0x0061]
>[    0.189179] pnp 00:06: [io  0x0063]
>[    0.189182] pnp 00:06: [io  0x0065]
>[    0.189185] pnp 00:06: [io  0x0067]
>[    0.189188] pnp 00:06: [io  0x0070]
>[    0.189191] pnp 00:06: [io  0x0080]
>[    0.189193] pnp 00:06: [io  0x0092]
>[    0.189197] pnp 00:06: [io  0x00b2-0x00b3]
>[    0.189200] pnp 00:06: [io  0x0680-0x069f]
>[    0.189203] pnp 00:06: [io  0x0800-0x080f]
>[    0.189206] pnp 00:06: [io  0x1000-0x107f]
>[    0.189209] pnp 00:06: [io  0x1180-0x11bf]
>[    0.189212] pnp 00:06: [io  0x1640-0x164f]
>[    0.189215] pnp 00:06: [io  0xff00-0xff7f]
>[    0.189291] system 00:06: [io  0x0680-0x069f] has been reserved
>[    0.189295] system 00:06: [io  0x0800-0x080f] has been reserved
>[    0.189299] system 00:06: [io  0x1000-0x107f] has been reserved
>[    0.189303] system 00:06: [io  0x1180-0x11bf] has been reserved
>[    0.189307] system 00:06: [io  0x1640-0x164f] has been reserved
>[    0.189311] system 00:06: [io  0xff00-0xff7f] has been reserved
>[    0.189315] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.189350] pnp 00:07: [io  0x06a0-0x06af]
>[    0.189353] pnp 00:07: [io  0x06b0-0x06ff]
>[    0.189417] system 00:07: [io  0x06a0-0x06af] has been reserved
>[    0.189421] system 00:07: [io  0x06b0-0x06ff] has been reserved
>[    0.189426] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.189439] pnp 00:08: [io  0x0070-0x0077]
>[    0.189446] pnp 00:08: [irq 8]
>[    0.189493] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.209055] pnp 00:09: [io  0x0060]
>[    0.209059] pnp 00:09: [io  0x0064]
>[    0.209067] pnp 00:09: [irq 1]
>[    0.209112] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.209130] pnp 00:0a: [irq 12]
>[    0.209173] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
>[    0.209208] pnp: PnP ACPI: found 11 devices
>[    0.209210] ACPI: ACPI bus type pnp unregistered
>[    0.246168] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
>[    0.246176] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
>[    0.246181] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
>[    0.246195] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
>[    0.246200] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
>[    0.246223] pci 0000:05:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
>[    0.246228] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 05] add_size 4000000
>[    0.246239] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
>[    0.246243] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>[    0.246247] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.246251] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.246255] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.246259] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.246267] pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
>[    0.246271] pci 0000:00:1c.0: BAR 14: assigned [mem 0x24000000-0x241fffff]
>[    0.246276] pci 0000:00:1c.0: BAR 15: assigned [mem 0x24200000-0x243fffff 64bit pref]
>[    0.246281] pci 0000:00:1c.1: BAR 15: assigned [mem 0x24400000-0x245fffff 64bit pref]
>[    0.246286] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
>[    0.246291] pci 0000:00:1c.1: BAR 13: assigned [io  0x4000-0x4fff]
>[    0.246296] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.246301] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>[    0.246309] pci 0000:00:1c.0:   bridge window [mem 0x24000000-0x241fffff]
>[    0.246316] pci 0000:00:1c.0:   bridge window [mem 0x24200000-0x243fffff 64bit pref]
>[    0.246325] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.246330] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
>[    0.246337] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd00fffff]
>[    0.246344] pci 0000:00:1c.1:   bridge window [mem 0x24400000-0x245fffff 64bit pref]
>[    0.246356] pci 0000:05:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
>[    0.246360] pci 0000:05:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
>[    0.246364] pci 0000:05:04.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
>[    0.246368] pci 0000:05:04.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
>[    0.246374] pci 0000:05:04.0: BAR 0: assigned [mem 0x28000000-0x28000fff]
>[    0.246382] pci 0000:05:04.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
>[    0.246387] pci 0000:05:04.0: BAR 16: assigned [mem 0x2c000000-0x2fffffff]
>[    0.246391] pci 0000:05:04.0: BAR 13: assigned [io  0x2400-0x24ff]
>[    0.246395] pci 0000:05:04.0: BAR 14: assigned [io  0x2800-0x28ff]
>[    0.246399] pci 0000:05:04.0: CardBus bridge to [bus 06-09]
>[    0.246402] pci 0000:05:04.0:   bridge window [io  0x2400-0x24ff]
>[    0.246409] pci 0000:05:04.0:   bridge window [io  0x2800-0x28ff]
>[    0.246416] pci 0000:05:04.0:   bridge window [mem 0x20000000-0x23ffffff pref]
>[    0.246423] pci 0000:05:04.0:   bridge window [mem 0x2c000000-0x2fffffff]
>[    0.246430] pci 0000:00:1e.0: PCI bridge to [bus 05]
>[    0.246435] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
>[    0.246443] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd01fffff]
>[    0.246449] pci 0000:00:1e.0:   bridge window [mem 0x20000000-0x23ffffff pref]
>[    0.246494] pci 0000:00:1e.0: enabling device (0004 -> 0007)
>[    0.246502] pci 0000:00:1e.0: setting latency timer to 64
>[    0.246516] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>[    0.246520] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
>[    0.246523] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
>[    0.246527] pci_bus 0000:02: resource 1 [mem 0x24000000-0x241fffff]
>[    0.246531] pci_bus 0000:02: resource 2 [mem 0x24200000-0x243fffff 64bit pref]
>[    0.246534] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
>[    0.246538] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd00fffff]
>[    0.246542] pci_bus 0000:03: resource 2 [mem 0x24400000-0x245fffff 64bit pref]
>[    0.246545] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
>[    0.246549] pci_bus 0000:05: resource 1 [mem 0xd0100000-0xd01fffff]
>[    0.246552] pci_bus 0000:05: resource 2 [mem 0x20000000-0x23ffffff pref]
>[    0.246556] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
>[    0.246559] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
>[    0.246563] pci_bus 0000:06: resource 0 [io  0x2400-0x24ff]
>[    0.246566] pci_bus 0000:06: resource 1 [io  0x2800-0x28ff]
>[    0.246570] pci_bus 0000:06: resource 2 [mem 0x20000000-0x23ffffff pref]
>[    0.246573] pci_bus 0000:06: resource 3 [mem 0x2c000000-0x2fffffff]
>[    0.246631] NET: Registered protocol family 2
>[    0.246859] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.246965] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.247082] TCP: Hash tables configured (established 16384 bind 16384)
>[    0.247102] TCP: reno registered
>[    0.247106] UDP hash table entries: 256 (order: 1, 8192 bytes)
>[    0.247114] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
>[    0.247204] NET: Registered protocol family 1
>[    0.247224] pci 0000:00:02.0: Boot video device
>[    0.247419] PCI: CLS mismatch (64 != 32), using 64 bytes
>[    0.247493] Unpacking initramfs...
>[    0.820698] Freeing initrd memory: 17092k freed
>[    0.832960] Simple Boot Flag at 0x36 set to 0x1
>[    0.833265] apm: BIOS not found.
>[    0.833665] audit: initializing netlink socket (disabled)
>[    0.833686] type=2000 audit(1356444459.832:1): initialized
>[    0.860294] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    0.862344] VFS: Disk quotas dquot_6.5.2
>[    0.862417] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.863099] msgmni has been set to 974
>[    0.863203] SELinux:  Registering netfilter hooks
>[    0.863800] alg: No test for stdrng (krng)
>[    0.863807] NET: Registered protocol family 38
>[    0.863866] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    0.863902] io scheduler noop registered
>[    0.863904] io scheduler deadline registered
>[    0.863917] io scheduler cfq registered (default)
>[    0.864186] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>[    0.864336] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
>[    0.864458] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.864487] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.864490] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.864822] vesafb: mode is 1024x768x32, linelength=4096, pages=0
>[    0.864825] vesafb: scrolling: redraw
>[    0.864828] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.865088] vesafb: framebuffer at 0xc0000000, mapped to 0xdff00000, using 3072k, total 3072k
>[    0.865211] Console: switching to colour frame buffer device 128x48
>[    0.901312] fb0: VESA VGA frame buffer device
>[    0.901342] intel_idle: does not run on family 6 model 14
>[    0.914042] ACPI: AC Adapter [ACAD] (on-line)
>[    0.914161] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>[    0.914184] ACPI: Lid Switch [LID0]
>[    0.914241] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>[    0.914246] ACPI: Power Button [PWRB]
>[    0.914311] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    0.914314] ACPI: Power Button [PWRF]
>[    0.950072] tsc: Marking TSC unstable due to TSC halts in idle
>[    0.950080] ACPI: acpi_idle registered with cpuidle
>[    0.992308] ACPI: Invalid active0 threshold
>[    1.004079] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.004082] ACPI: Thermal Zone [TZ00] (35 C)
>[    1.004147] GHES: HEST is not enabled!
>[    1.004236] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.005023] Non-volatile memory driver v1.3
>[    1.005027] Linux agpgart interface v0.103
>[    1.005131] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
>[    1.005186] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
>[    1.005376] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>[    1.005524] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>[    1.006768] loop: module loaded
>[    1.006893] ata_piix 0000:00:1f.2: version 2.13
>[    1.006913] ata_piix 0000:00:1f.2: MAP [
>[    1.006915]  P0 P2 IDE IDE ]
>[    1.124400] ACPI: Battery Slot [BAT1] (battery present)
>[    1.157025] ata_piix 0000:00:1f.2: setting latency timer to 64
>[    1.157412] scsi0 : ata_piix
>[    1.157859] scsi1 : ata_piix
>[    1.158284] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
>[    1.158288] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
>[    1.158366] libphy: Fixed MDIO Bus: probed
>[    1.158519] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.158559] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    1.158564] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    1.158618] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    1.162551] ehci_hcd 0000:00:1d.7: debug port 1
>[    1.162561] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[    1.162591] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
>[    1.168023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    1.168081] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.168085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.168088] usb usb1: Product: EHCI Host Controller
>[    1.168091] usb usb1: Manufacturer: Linux 3.6.10-2.fc17.i686 ehci_hcd
>[    1.168095] usb usb1: SerialNumber: 0000:00:1d.7
>[    1.168244] hub 1-0:1.0: USB hub found
>[    1.168251] hub 1-0:1.0: 8 ports detected
>[    1.168354] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.168373] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.168406] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    1.168411] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    1.168460] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.168493] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
>[    1.168538] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.168542] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.168545] usb usb2: Product: UHCI Host Controller
>[    1.168548] usb usb2: Manufacturer: Linux 3.6.10-2.fc17.i686 uhci_hcd
>[    1.168552] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.168671] hub 2-0:1.0: USB hub found
>[    1.168677] hub 2-0:1.0: 2 ports detected
>[    1.168764] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    1.168769] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    1.168815] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    1.168862] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
>[    1.168903] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.168906] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.168910] usb usb3: Product: UHCI Host Controller
>[    1.168913] usb usb3: Manufacturer: Linux 3.6.10-2.fc17.i686 uhci_hcd
>[    1.168916] usb usb3: SerialNumber: 0000:00:1d.1
>[    1.169053] hub 3-0:1.0: USB hub found
>[    1.169059] hub 3-0:1.0: 2 ports detected
>[    1.169136] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    1.169141] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    1.169197] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    1.169239] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>[    1.169279] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.169282] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.169286] usb usb4: Product: UHCI Host Controller
>[    1.169289] usb usb4: Manufacturer: Linux 3.6.10-2.fc17.i686 uhci_hcd
>[    1.169292] usb usb4: SerialNumber: 0000:00:1d.2
>[    1.169410] hub 4-0:1.0: USB hub found
>[    1.169415] hub 4-0:1.0: 2 ports detected
>[    1.169496] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[    1.169501] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    1.169550] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    1.169592] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
>[    1.169632] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.169635] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.169639] usb usb5: Product: UHCI Host Controller
>[    1.169642] usb usb5: Manufacturer: Linux 3.6.10-2.fc17.i686 uhci_hcd
>[    1.169645] usb usb5: SerialNumber: 0000:00:1d.3
>[    1.169762] hub 5-0:1.0: USB hub found
>[    1.169768] hub 5-0:1.0: 2 ports detected
>[    1.169897] usbcore: registered new interface driver usbserial
>[    1.169914] usbcore: registered new interface driver usbserial_generic
>[    1.169925] USB Serial support registered for generic
>[    1.169928] usbserial: USB Serial Driver core
>[    1.169995] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.188903] i8042: Detected active multiplexing controller, rev 1.1
>[    1.211081] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.211087] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    1.211090] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    1.211093] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    1.211096] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    1.211153] mousedev: PS/2 mouse device common for all mice
>[    1.211362] rtc_cmos 00:08: RTC can wake from S4
>[    1.211527] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>[    1.211563] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.211697] device-mapper: uevent: version 1.0.3
>[    1.211795] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
>[    1.211884] cpuidle: using governor ladder
>[    1.211912] cpuidle: using governor menu
>[    1.212349] EFI Variables Facility v0.08 2004-May-17
>[    1.212499] usbcore: registered new interface driver usbhid
>[    1.212501] usbhid: USB HID core driver
>[    1.212537] drop_monitor: Initializing network drop monitor service
>[    1.212694] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.212729] TCP: cubic registered
>[    1.212732] Initializing XFRM netlink socket
>[    1.212891] NET: Registered protocol family 10
>[    1.213175] mip6: Mobile IPv6
>[    1.213179] NET: Registered protocol family 17
>[    1.213517] Using IPI No-Shortcut mode
>[    1.213616] PM: Hibernation image not present or could not be loaded.
>[    1.213632] registered taskstats version 1
>[    1.214035]   Magic number: 8:465:132
>[    1.214112] acpi device:07: hash matches
>[    1.214158] rtc_cmos 00:08: setting system clock to 2012-12-25 14:07:40 UTC (1356444460)
>[    1.214205] ondemand governor failed, too long transition latency of HW, fallback to performance governor
>[    1.214212] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>[    1.229326] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    1.317319] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850, RB31, max UDMA/33
>[    1.317509] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60R, max UDMA/100
>[    1.317513] ata1.00: 156301488 sectors, multi 16: LBA48 
>[    1.322174] ata1.00: configured for UDMA/100
>[    1.322334] scsi 0:0:0:0: Direct-Access     ATA      HTS541080G9SA00  MB4I PQ: 0 ANSI: 5
>[    1.322633] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>[    1.322706] sd 0:0:0:0: [sda] Write Protect is off
>[    1.322711] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.322741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.323142] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.324458] ata2.00: configured for UDMA/33
>[    1.327422] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850   RB31 PQ: 0 ANSI: 5
>[    1.331442] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.331446] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.331572] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    1.331739] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    1.323289] ACPI: Invalid Power Resource to register!
>[    1.331867] ACPI: Invalid Power Resource to register!<6>[    1.342713]  sda: sda1 sda2
>[    1.343078] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.343110] Freeing unused kernel memory: 628k freed
>[    1.343437] Write protecting the kernel text: 5496k
>[    1.343485] Write protecting the kernel read-only data: 2168k
>[    1.426983] dracut: dracut-018-105.git20120927.fc17
>[    1.470555] dracut: rd.luks=0: removing cryptoluks activation
>[    1.501281] udevd[104]: starting version 182
>[    1.532974] [drm] Initialized drm 1.1.0 20060810
>[    1.575103] ACPI Warning: _BQC returned an invalid level (20120711/video-472)
>[    1.585166] acpi device:05: registered as cooling_device1
>[    1.585226] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.585297] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
>[    1.591884] checking generic (c0000000 300000) vs hw (c0000000 10000000)
>[    1.591891] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>[    1.591921] Console: switching to colour dummy device 80x25
>[    1.592463] i915 0000:00:02.0: setting latency timer to 64
>[    1.593443] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    1.593448] [drm] Driver supports precise vblank timestamp query.
>[    1.619057] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.657128] [drm:intel_panel_setup_backlight] *ERROR* Failed to get maximum backlight value
>[    1.747035] usb 5-1: new low-speed USB device number 2 using uhci_hcd
>[    1.912375] [drm] initialized overlay support
>[    1.923273] usb 5-1: New USB device found, idVendor=04d9, idProduct=1135
>[    1.923278] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.961653] input: HID 04d9:1135 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input5
>[    1.963331] hid-generic 0003:04D9:1135.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:1135] on usb-0000:00:1d.3-1/input0
>[    2.139730] fbcon: inteldrmfb (fb0) is primary device
>[    2.299553] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 264775
>[    2.352023] i915: fixme: max PWM is zero
>[    2.352036] Console: switching to colour frame buffer device 128x48
>[    2.356597] fb0: inteldrmfb frame buffer device
>[    2.356599] drm: registered panic notifier
>[    2.358093] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    2.364784] dracut: Starting plymouth daemon
>[    2.372241] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
>[    2.893744] dracut: rd.dm=0: removing DM RAID activation
>[    2.909906] dracut: rd.md=0: removing MD RAID activation
>[    3.084579] yenta_cardbus 0000:05:04.0: CardBus bridge found [17aa:3828]
>[    3.084610] yenta_cardbus 0000:05:04.0: Using CSCINT to route CSC interrupts to PCI
>[    3.084613] yenta_cardbus 0000:05:04.0: Routing CardBus interrupts to PCI
>[    3.084620] yenta_cardbus 0000:05:04.0: TI: mfunc 0x01111c12, devctl 0x44
>[    3.088019] sdhci: Secure Digital Host Controller Interface driver
>[    3.088024] sdhci: Copyright(c) Pierre Ossman
>[    3.307834] yenta_cardbus 0000:05:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
>[    3.307842] yenta_cardbus 0000:05:04.0: Socket status: 30000006
>[    3.307848] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #05 to #09
>[    3.307861] yenta_cardbus 0000:05:04.0: pcmcia: parent PCI bridge window: [io  0x2000-0x2fff]
>[    3.307865] yenta_cardbus 0000:05:04.0: pcmcia: parent PCI bridge window: [mem 0xd0100000-0xd01fffff]
>[    3.307870] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0100000-0xd01fffff:
>[    3.307876]  excluding 0xd0100000-0xd010ffff
>[    3.307891] yenta_cardbus 0000:05:04.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x23ffffff pref]
>[    3.307895] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x23ffffff:
>[    3.307905]  excluding 0x20000000-0x23ffffff
>[    3.308649] sdhci-pci 0000:05:06.1: SDHCI controller found [1180:0822] (rev 19)
>[    3.308664] sdhci-pci 0000:05:06.1: enabling device (0000 -> 0002)
>[    3.309703] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.309713] sdhci-pci 0000:05:06.1: setting latency timer to 64
>[    3.310733] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.312361] Registered led device: mmc0::
>[    3.340123] mmc0: SDHCI controller on PCI [0000:05:06.1] using DMA
>[    3.340442] firewire_ohci 0000:05:06.0: enabling device (0000 -> 0002)
>[    3.340477] firewire_ohci 0000:05:06.0: setting latency timer to 64
>[    3.371073] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.399181] firewire_ohci 0000:05:06.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
>[    3.432062] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.492024] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.504496] dracut: Scanning devices sda2  for LVM logical volumes vg_edk/lv_swap vg_edk/lv_root
>[    3.520754] dracut: inactive '/dev/vg_edk/lv_swap' [992.00 MiB] inherit
>[    3.521071] dracut: inactive '/dev/vg_edk/lv_home' [24.34 GiB] inherit
>[    3.521333] dracut: inactive '/dev/vg_edk/lv_root' [48.72 GiB] inherit
>[    3.552630] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.900169] firewire_core 0000:05:06.0: created device fw0: GUID 00023f6ca0413ad6, S400
>[    4.000734] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    4.139905] dracut: Checking ext4: /dev/mapper/vg_edk-lv_root
>[    4.140221] dracut: issuing e2fsck -a  /dev/mapper/vg_edk-lv_root
>[    4.213494] dracut: _Fedora-17-i686-: clean, 230806/3194880 files, 1862321/12771328 blocks
>[    4.214868] dracut: Remounting /dev/mapper/vg_edk-lv_root with -o ro
>[    4.246508] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    4.268074] dracut: Mounted root filesystem /dev/mapper/vg_edk-lv_root
>[    4.456359] dracut: Switching root
>[    5.499025] type=1404 audit(1356444464.783:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>[    5.759743] SELinux: 2048 avtab hash slots, 103464 rules.
>[    5.792403] SELinux: 2048 avtab hash slots, 103464 rules.
>[    6.160598] SELinux:  9 users, 15 roles, 4213 types, 231 bools, 1 sens, 1024 cats
>[    6.160607] SELinux:  83 classes, 103464 rules
>[    6.168611] SELinux:  Permission wake_alarm in class capability2 not defined in policy.
>[    6.168619] SELinux:  Permission block_suspend in class capability2 not defined in policy.
>[    6.168627] SELinux: the above unknown classes and permissions will be allowed
>[    6.168643] SELinux:  Completing initialization.
>[    6.168644] SELinux:  Setting up existing superblocks.
>[    6.168660] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    6.168668] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>[    6.168687] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>[    6.168696] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[    6.168711] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.168746] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>[    6.169456] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>[    6.169463] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>[    6.170885] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>[    6.170902] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>[    6.170907] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>[    6.170936] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    6.170947] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[    6.170957] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>[    6.170978] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    6.171642] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.171659] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.171708] SELinux: initialized (dev dm-1, type ext4), uses xattr
>[    6.171999] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>[    6.174596] type=1403 audit(1356444465.458:3): policy loaded auid=4294967295 ses=4294967295
>[    6.182432] systemd[1]: Successfully loaded SELinux policy in 745ms 486us.
>[    6.338078] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.338679] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.439390] systemd[1]: Relabelled /dev and /run in 100ms 512us.
>[    6.483936] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.484276] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.484713] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.484977] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.485267] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.485513] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.485794] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.486068] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.486189] systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
>[    6.565040] systemd[1]: Set hostname to <EDK>.
>[    8.484956] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[    9.526816] systemd-journald[354]: Fixed max_use=24.4M max_size=3.0M min_size=64.0K keep_free=12.2M
>[    9.537179] systemd-journald[354]: Vacuuming...
>[    9.834365] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    9.835817] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    9.840926] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
>[    9.870636] EXT4-fs (dm-1): re-mounted. Opts: (null)
>[   10.006837] udevd[357]: starting version 182
>[   13.909814] intel_rng: FWH not detected
>[   13.910512] microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
>[   13.910854] ACPI Warning: 0x000018c0-0x000018df SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
>[   13.910862] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   14.141958] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   14.286080] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
>[   14.286095] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
>[   14.286104] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
>[   14.286114] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
>[   14.286123] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
>[   14.298878] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
>[   14.298890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   14.298895] ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
>[   14.298901] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   14.298904] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   14.299631] leds_ss4200: no LED devices found
>[   14.304109] iTCO_vendor_support: vendor-support=0
>[   14.304950] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[   14.304991] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
>[   14.306148] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   14.311133] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
>[   14.459739] r592 0000:05:06.2: enabling device (0000 -> 0002)
>[   14.459760] r592 0000:05:06.2: setting latency timer to 64
>[   14.460519] r592: driver successfully loaded
>[   14.824062] cfg80211: Calling CRDA to update world regulatory domain
>[   15.061328] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>[   15.061362] 8139cp 0000:05:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
>[   15.869387] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
>[   15.869398]  excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xe3fff 0xe8000-0xfffff
>[   15.869482] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
>[   15.869497]  clean.
>[   15.869566] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
>[   15.869581]  clean.
>[   15.955212] 8139too: 8139too Fast Ethernet driver 0.9.28
>[   15.955293] 8139too 0000:05:01.0: setting latency timer to 64
>[   15.955983] 8139too 0000:05:01.0: eth0: RealTek RTL8139 at 0xdff0e000, 00:0f:b0:d1:88:a3, IRQ 21
>[   16.721527] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[   16.741030] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
>[   16.763154] Broadcom 43xx driver loaded [ Features: PMNLS ]
>[   16.794837] cfg80211: World regulatory domain updated:
>[   16.794845] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   16.794848] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   16.794851] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   16.794854] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   16.794857] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   16.794860] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   16.856851] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[   16.857235] Registered led device: b43-phy0::tx
>[   16.857265] Registered led device: b43-phy0::rx
>[   16.857294] Registered led device: b43-phy0::radio
>[   17.080112] ALSA sound/pci/hda/hda_auto_parser.c:322 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[   17.080120] ALSA sound/pci/hda/hda_auto_parser.c:326    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   17.080123] ALSA sound/pci/hda/hda_auto_parser.c:330    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[   17.080126] ALSA sound/pci/hda/hda_auto_parser.c:331    mono: mono_out=0x0
>[   17.080128] ALSA sound/pci/hda/hda_auto_parser.c:335    inputs:
>[   17.080132] ALSA sound/pci/hda/hda_auto_parser.c:339      Mic=0x18
>[   17.080134] ALSA sound/pci/hda/hda_auto_parser.c:339      Internal Mic=0x19
>[   17.081501] ALSA sound/pci/hda/patch_realtek.c:1352 realtek: Enabling init ASM_ID=0x8e2d CODEC_ID=10ec0862
>[   17.097596] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>[   17.097999] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>[   17.822169] Adding 1015804k swap on /dev/mapper/vg_edk-lv_swap.  Priority:0 extents:1 across:1015804k 
>[   18.162431] cfg80211: Calling CRDA for country: CL
>[   18.167042] cfg80211: Regulatory domain changed to country: CL
>[   18.167047] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   18.167050] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   18.167053] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   18.167055] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   18.167058] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   22.239353] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[   22.508040] SELinux: initialized (dev sda1, type ext4), uses xattr
>[   25.831334] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
>[   25.831351] SELinux: initialized (dev dm-2, type ext4), uses xattr
>[   31.052206] nf_conntrack version 0.5.0 (7807 buckets, 31228 max)
>[   31.055507] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   38.747388] Bluetooth: Core ver 2.16
>[   38.747491] NET: Registered protocol family 31
>[   38.747493] Bluetooth: HCI device and connection manager initialized
>[   38.747496] Bluetooth: HCI socket layer initialized
>[   38.747499] Bluetooth: L2CAP socket layer initialized
>[   38.747504] Bluetooth: SCO socket layer initialized
>[   38.804186] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   38.804193] Bluetooth: BNEP filters: protocol multicast
>[   38.825053] b43-phy0: Loading OpenSource firmware version 410.31754
>[   38.825060] b43-phy0: Hardware crypto acceleration not supported by firmware
>[   38.881080] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   38.899306] 8139too 0000:05:01.0: em1: link down
>[   38.900113] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[   41.798206] wlan0: authenticate with 5c:33:8e:ad:84:ec
>[   41.815282] wlan0: send auth to 5c:33:8e:ad:84:ec (try 1/3)
>[   41.817170] wlan0: authenticated
>[   41.819948] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported
>[   41.821040] wlan0: associate with 5c:33:8e:ad:84:ec (try 1/3)
>[   41.823607] wlan0: RX AssocResp from 5c:33:8e:ad:84:ec (capab=0xc31 status=0 aid=2)
>[   41.823907] wlan0: associated
>[   41.823940] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[   41.824023] cfg80211: Calling CRDA for country: CL
>[   41.851790] cfg80211: Regulatory domain changed to country: CL
>[   41.851796] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   41.851799] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   41.851802] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   41.851805] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   41.851807] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   53.778917] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 4
>[   53.782047] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[   53.794812] psmouse serio4: TouchPad at isa0060/serio4/input0 - driver resynced.
>[   55.571084] fuse init (API version 7.20)
>[   55.579514] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[   64.234435] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[   89.832057] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[  980.836680] wlan0: deauthenticating from 5c:33:8e:ad:84:ec by local choice (reason=3)
>[  980.839275] cfg80211: Calling CRDA to update world regulatory domain
>[  981.650157] cfg80211: World regulatory domain updated:
>[  981.650164] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  981.650167] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  981.650170] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  981.650173] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  981.650176] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  981.650179] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  981.650200] cfg80211: Calling CRDA for country: CL
>[  981.653437] cfg80211: Regulatory domain changed to country: CL
>[  981.653443] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  981.653446] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  981.653449] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  981.653451] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  981.653454] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  989.022720] PM: Syncing filesystems ... done.
>[  989.318262] PM: Preparing system for mem sleep
>[  989.655059] Freezing user space processes ... (elapsed 0.19 seconds) done.
>[  989.853110] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  989.864095] PM: Entering mem sleep
>[  989.864133] Suspending console(s) (use no_console_suspend to debug)
>[  989.864432] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  989.864559] sd 0:0:0:0: [sda] Stopping disk
>[  989.955080] ACPI handle has no context!
>[  990.367046] PM: suspend of devices complete after 502.748 msecs
>[  990.367177] PM: late suspend of devices complete after 0.126 msecs
>[  990.389170] PM: noirq suspend of devices complete after 21.988 msecs
>[  990.389325] ACPI: Preparing to enter system sleep state S3
>[  990.404057] PM: Saving platform NVS memory
>[  990.404237] Disabling non-boot CPUs ...
>[  990.404285] Extended CMOS year: 2000
>[  990.404285] ACPI: Low-level resume complete
>[  990.404285] PM: Restoring platform NVS memory
>[  990.404285] Extended CMOS year: 2000
>[  990.404285] CPU0: Thermal monitoring handled by SMI
>[  990.404285] ACPI: Waking up from system sleep state S3
>[  990.708085] firewire_ohci 0000:05:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[  990.708087] firewire_ohci 0000:05:06.0: MMC cards are now supported by standard SDHCI controller
>[  990.730364] PM: noirq resume of devices complete after 88.284 msecs
>[  990.730552] PM: early resume of devices complete after 0.050 msecs
>[  990.730615] i915 0000:00:02.0: setting latency timer to 64
>[  990.776613] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[  990.776692] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  990.776721] usb usb2: root hub lost power or was reset
>[  990.776739] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  990.776767] usb usb3: root hub lost power or was reset
>[  990.776784] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[  990.776811] usb usb4: root hub lost power or was reset
>[  990.776827] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[  990.776854] usb usb5: root hub lost power or was reset
>[  990.776873] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  990.776899] pci 0000:00:1e.0: setting latency timer to 64
>[  990.776915] ata_piix 0000:00:1f.2: setting latency timer to 64
>[  990.776965] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[  990.777979] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[  990.984581] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[  990.984584] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[  990.990471] ata2.00: configured for UDMA/33
>[  991.246046] usb 5-1: reset low-speed USB device number 2 using uhci_hcd
>[  991.330056] firewire_core 0000:05:06.0: rediscovered device fw0
>[  993.906261] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[  993.906264] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[  993.912588] ata1.00: configured for UDMA/100
>[  993.944335] sd 0:0:0:0: [sda] Starting disk
>[  993.944491] Extended CMOS year: 2000
>[  994.092130] PM: resume of devices complete after 3361.571 msecs
>[  994.092271] PM: Finishing wakeup.
>[  994.092273] Restarting tasks ... done.
>[  994.182344] video LNXVIDEO:01: Restoring backlight state
>[  994.253088] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[  994.315025] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[  994.379232] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[  994.444306] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[  994.713050] b43-phy0: Loading OpenSource firmware version 410.31754
>[  994.713058] b43-phy0: Hardware crypto acceleration not supported by firmware
>[  994.779190] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  994.791573] 8139too 0000:05:01.0: em1: link down
>[  994.794827] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[  997.854831] wlan0: authenticate with 5c:33:8e:ad:84:ec
>[  997.857371] wlan0: send auth to 5c:33:8e:ad:84:ec (try 1/3)
>[  997.862203] wlan0: authenticated
>[  997.862455] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported
>[  997.863045] wlan0: associate with 5c:33:8e:ad:84:ec (try 1/3)
>[  997.867904] wlan0: RX AssocResp from 5c:33:8e:ad:84:ec (capab=0xc31 status=0 aid=2)
>[  997.868247] wlan0: associated
>[  997.868286] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[  997.868372] cfg80211: Calling CRDA for country: CL
>[  997.887868] cfg80211: Regulatory domain changed to country: CL
>[  997.887875] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  997.887878] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  997.887881] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  997.887883] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  997.887886] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1006.717149] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 1284.012993] wlan0: deauthenticating from 5c:33:8e:ad:84:ec by local choice (reason=3)
>[ 1284.022160] cfg80211: Calling CRDA to update world regulatory domain
>[ 1285.749808] cfg80211: World regulatory domain updated:
>[ 1285.749816] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1285.749819] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1285.749822] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1285.749825] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1285.749828] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1285.749831] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1285.749854] cfg80211: Calling CRDA for country: CL
>[ 1285.753558] cfg80211: Regulatory domain changed to country: CL
>[ 1285.753564] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1285.753567] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1285.753570] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1285.753573] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1285.753575] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1288.815074] PM: Syncing filesystems ... done.
>[ 1288.816345] PM: Preparing system for mem sleep
>[ 1288.833364] Freezing user space processes ... (elapsed 0.05 seconds) done.
>[ 1288.888121] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 1288.899106] PM: Entering mem sleep
>[ 1288.899151] Suspending console(s) (use no_console_suspend to debug)
>[ 1288.899471] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 1288.988072] ACPI handle has no context!
>[ 1289.124812] sd 0:0:0:0: [sda] Stopping disk
>[ 1289.568043] PM: suspend of devices complete after 668.716 msecs
>[ 1289.568160] PM: late suspend of devices complete after 0.113 msecs
>[ 1289.590264] PM: noirq suspend of devices complete after 22.100 msecs
>[ 1289.590413] ACPI: Preparing to enter system sleep state S3
>[ 1289.603057] PM: Saving platform NVS memory
>[ 1289.603239] Disabling non-boot CPUs ...
>[ 1289.603287] Extended CMOS year: 2000
>[ 1289.603287] ACPI: Low-level resume complete
>[ 1289.603287] PM: Restoring platform NVS memory
>[ 1289.603287] Extended CMOS year: 2000
>[ 1289.603287] CPU0: Thermal monitoring handled by SMI
>[ 1289.603287] ACPI: Waking up from system sleep state S3
>[ 1289.908086] firewire_ohci 0000:05:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[ 1289.908089] firewire_ohci 0000:05:06.0: MMC cards are now supported by standard SDHCI controller
>[ 1289.930363] PM: noirq resume of devices complete after 88.234 msecs
>[ 1289.930548] PM: early resume of devices complete after 0.051 msecs
>[ 1289.930616] i915 0000:00:02.0: setting latency timer to 64
>[ 1289.982264] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[ 1289.982343] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 1289.982373] usb usb2: root hub lost power or was reset
>[ 1289.982391] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 1289.982418] usb usb3: root hub lost power or was reset
>[ 1289.982435] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 1289.982462] usb usb4: root hub lost power or was reset
>[ 1289.982479] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[ 1289.982506] usb usb5: root hub lost power or was reset
>[ 1289.982524] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 1289.982551] pci 0000:00:1e.0: setting latency timer to 64
>[ 1289.982566] ata_piix 0000:00:1f.2: setting latency timer to 64
>[ 1289.982616] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1289.983630] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1290.139613] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 1290.139617] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[ 1290.145467] ata2.00: configured for UDMA/33
>[ 1290.450044] usb 5-1: reset low-speed USB device number 2 using uhci_hcd
>[ 1290.537057] firewire_core 0000:05:06.0: rediscovered device fw0
>[ 1293.164265] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 1293.164268] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[ 1293.170591] ata1.00: configured for UDMA/100
>[ 1293.202493] sd 0:0:0:0: [sda] Starting disk
>[ 1293.202650] Extended CMOS year: 2000
>[ 1293.353134] PM: resume of devices complete after 3422.580 msecs
>[ 1293.353277] PM: Finishing wakeup.
>[ 1293.353279] Restarting tasks ... done.
>[ 1293.447944] video LNXVIDEO:01: Restoring backlight state
>[ 1293.523760] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1293.606735] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1293.716718] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1293.793636] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1294.073061] b43-phy0: Loading OpenSource firmware version 410.31754
>[ 1294.073070] b43-phy0: Hardware crypto acceleration not supported by firmware
>[ 1294.140073] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 1294.145587] 8139too 0000:05:01.0: em1: link down
>[ 1294.145719] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[ 1296.340264] wlan0: authenticate with 5c:33:8e:ad:84:ec
>[ 1296.349033] wlan0: send auth to 5c:33:8e:ad:84:ec (try 1/3)
>[ 1296.350767] wlan0: authenticated
>[ 1296.351773] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1296.352033] wlan0: associate with 5c:33:8e:ad:84:ec (try 1/3)
>[ 1296.354373] wlan0: RX AssocResp from 5c:33:8e:ad:84:ec (capab=0xc31 status=0 aid=3)
>[ 1296.354724] wlan0: associated
>[ 1296.354765] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 1296.354846] cfg80211: Calling CRDA for country: CL
>[ 1296.364447] cfg80211: Regulatory domain changed to country: CL
>[ 1296.364454] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1296.364457] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1296.364460] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1296.364463] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1296.364465] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1300.957067] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 1800.835592] wlan0: deauthenticating from 5c:33:8e:ad:84:ec by local choice (reason=3)
>[ 1800.838450] cfg80211: Calling CRDA to update world regulatory domain
>[ 1803.739845] cfg80211: World regulatory domain updated:
>[ 1803.739876] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1803.739879] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1803.739904] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1803.739907] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1803.739909] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1803.739934] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1803.739975] cfg80211: Calling CRDA for country: CL
>[ 1803.852969] cfg80211: Regulatory domain changed to country: CL
>[ 1803.852975] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1803.853000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1803.853064] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1803.853067] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1803.853069] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1809.343978] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[ 1809.344067] PM: Basic memory bitmaps created
>[ 1809.344070] PM: Syncing filesystems ... done.
>[ 1809.776222] Freezing user space processes ... (elapsed 0.11 seconds) done.
>[ 1809.887450] PM: Preallocating image memory... done (allocated 78862 pages)
>[ 1816.256105] PM: Allocated 315448 kbytes in 6.36 seconds (49.59 MB/s)
>[ 1816.256108] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 1816.268064] Suspending console(s) (use no_console_suspend to debug)
>[ 1816.272270] ACPI handle has no context!
>[ 1816.469125] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 1816.685130] PM: freeze of devices complete after 417.036 msecs
>[ 1816.685637] PM: late freeze of devices complete after 0.480 msecs
>[ 1816.687670] PM: noirq freeze of devices complete after 2.028 msecs
>[ 1816.687880] ACPI: Preparing to enter system sleep state S4
>[ 1816.744156] PM: Saving platform NVS memory
>[ 1816.744763] Disabling non-boot CPUs ...
>[ 1816.744921] Extended CMOS year: 2000
>[ 1816.745028] PM: Creating hibernation image:
>[ 1816.745028] PM: Need to copy 48267 pages
>[ 1816.745028] PM: Normal pages needed: 48267 + 1024, available pages: 80345
>[ 1816.745028] PM: Restoring platform NVS memory
>[ 1816.745028] Extended CMOS year: 2000
>[ 1816.745028] CPU0: Thermal monitoring handled by SMI
>[ 1816.745074] ACPI: Waking up from system sleep state S4
>[ 1816.840470] PM: noirq restore of devices complete after 33.412 msecs
>[ 1816.840551] PM: early restore of devices complete after 0.045 msecs
>[ 1816.861181] i915 0000:00:02.0: setting latency timer to 64
>[ 1816.866384] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[ 1816.866462] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 1816.866490] usb usb2: root hub lost power or was reset
>[ 1816.866504] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 1816.866529] usb usb3: root hub lost power or was reset
>[ 1816.866541] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 1816.866566] usb usb4: root hub lost power or was reset
>[ 1816.866579] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[ 1816.866604] usb usb5: root hub lost power or was reset
>[ 1816.866620] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 1816.866640] usb usb1: root hub lost power or was reset
>[ 1816.870542] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[ 1816.870567] ata_piix 0000:00:1f.2: setting latency timer to 64
>[ 1816.870679] pci 0000:00:1e.0: setting latency timer to 64
>[ 1817.025266] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 1817.025269] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[ 1817.026559] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 1817.026562] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[ 1817.031508] ata1.00: configured for UDMA/100
>[ 1817.031562] sd 0:0:0:0: [sda] Starting disk
>[ 1817.032458] ata2.00: configured for UDMA/33
>[ 1817.124794] Extended CMOS year: 2000
>[ 1817.376054] usb 5-1: reset low-speed USB device number 2 using uhci_hcd
>[ 1817.426064] firewire_core 0000:05:06.0: rediscovered device fw0
>[ 1817.869168] PM: restore of devices complete after 1008.167 msecs
>[ 1817.869361] PM: Image restored successfully.
>[ 1817.869364] Restarting tasks ... done.
>[ 1817.874033] PM: Basic memory bitmaps freed
>[ 1817.874265] video LNXVIDEO:01: Restoring backlight state
>[ 1817.954149] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1818.013219] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1818.076127] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1818.140986] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1842.500067] b43-phy0: Loading OpenSource firmware version 410.31754
>[ 1842.500074] b43-phy0: Hardware crypto acceleration not supported by firmware
>[ 1842.559572] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 1842.785391] 8139too 0000:05:01.0: em1: link down
>[ 1842.785450] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[ 1846.109098] wlan0: authenticate with 5c:33:8e:ad:84:ec
>[ 1846.109466] wlan0: send auth to 5c:33:8e:ad:84:ec (try 1/3)
>[ 1846.111276] wlan0: authenticated
>[ 1846.112398] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1846.113042] wlan0: associate with 5c:33:8e:ad:84:ec (try 1/3)
>[ 1846.115750] wlan0: RX AssocResp from 5c:33:8e:ad:84:ec (capab=0xc31 status=0 aid=2)
>[ 1846.116088] wlan0: associated
>[ 1846.116126] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 1846.116207] cfg80211: Calling CRDA for country: CL
>[ 1847.704272] cfg80211: Regulatory domain changed to country: CL
>[ 1847.704280] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1847.704283] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1847.704286] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1847.704289] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1847.704291] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1856.750076] usb 5-1: USB disconnect, device number 2
>[ 1903.487550] wlan0: deauthenticating from 5c:33:8e:ad:84:ec by local choice (reason=3)
>[ 1903.489848] cfg80211: Calling CRDA to update world regulatory domain
>[ 1903.736702] cfg80211: World regulatory domain updated:
>[ 1903.736731] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1903.736734] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1903.736738] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1903.736762] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1903.736765] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1903.736768] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1903.736828] cfg80211: Calling CRDA for country: CL
>[ 1903.785140] cfg80211: Regulatory domain changed to country: CL
>[ 1903.785167] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1903.785170] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1903.785173] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1903.785176] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1903.785200] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1908.017715] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[ 1908.017721] PM: Basic memory bitmaps created
>[ 1908.017723] PM: Syncing filesystems ... done.
>[ 1908.332296] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 1908.766304] kworker/0:3: page allocation failure: order:0, mode:0x80d0
>[ 1908.766312] Pid: 42, comm: kworker/0:3 Not tainted 3.6.10-2.fc17.i686 #1
>[ 1908.766315] Call Trace:
>[ 1908.343174] PM: Preallocating image memory... 
>[ 1908.766320]  [<c04f952d>] warn_alloc_failed+0xad/0xf0
>[ 1908.766333]  [<c04fc2df>] __alloc_pages_nodemask+0x55f/0x7d0
>[ 1908.766339]  [<c04fc5de>] __get_free_pages+0x2e/0x60
>[ 1908.766343]  [<c04fc672>] get_zeroed_page+0x12/0x20
>[ 1908.766349]  [<c07f4b17>] power_supply_uevent+0x87/0x2b0
>[ 1908.766356]  [<c066ffff>] ? format_decode+0x2ef/0x3b0
>[ 1908.766362]  [<c0730ac7>] dev_uevent+0xa7/0x260
>[ 1908.766367]  [<c066ab78>] ? add_uevent_var+0x38/0xc0
>[ 1908.766371]  [<c0730a20>] ? device_get_devnode+0xd0/0xd0
>[ 1908.766375]  [<c066af3e>] kobject_uevent_env+0x2ee/0x650
>[ 1908.766380]  [<c082a84f>] ? led_trigger_blink+0x1f/0x30
>[ 1908.766385]  [<c0730a20>] ? device_get_devnode+0xd0/0xd0
>[ 1908.766389]  [<c066b2aa>] kobject_uevent+0xa/0x10
>[ 1908.766393]  [<c07f4341>] power_supply_changed_work+0x51/0x80
>[ 1908.766398]  [<c07f43d0>] ? __power_supply_is_system_supplied+0x60/0x60
>[ 1908.766404]  [<c04559f0>] process_one_work+0x120/0x3e0
>[ 1908.766410]  [<c0955a25>] ? apic_timer_interrupt+0x31/0x38
>[ 1908.766416]  [<c049ee50>] ? init_root_id+0xa0/0xa0
>[ 1908.766420]  [<c07f42f0>] ? power_supply_am_i_supplied+0x70/0x70
>[ 1908.766425]  [<c0457341>] worker_thread+0x111/0x3b0
>[ 1908.766430]  [<c046778e>] ? complete+0x4e/0x60
>[ 1908.766435]  [<c0457230>] ? manage_workers+0x2a0/0x2a0
>[ 1908.766439]  [<c045bd22>] kthread+0x72/0x80
>[ 1908.766443]  [<c045bcb0>] ? kthread_freezable_should_stop+0x60/0x60
>[ 1908.766449]  [<c095c63e>] kernel_thread_helper+0x6/0x10
>[ 1908.766451] Mem-Info:
>[ 1908.766454] DMA per-cpu:
>[ 1908.766456] CPU    0: hi:    0, btch:   1 usd:   0
>[ 1908.766458] Normal per-cpu:
>[ 1908.766460] CPU    0: hi:  186, btch:  31 usd: 209
>[ 1908.766466] active_anon:24358 inactive_anon:24382 isolated_anon:64
>[ 1908.766466]  active_file:0 inactive_file:20 isolated_file:0
>[ 1908.766466]  unevictable:4 dirty:1 writeback:7824 unstable:0
>[ 1908.766466]  free:1167 slab_reclaimable:2378 slab_unreclaimable:5962
>[ 1908.766466]  mapped:132 shmem:16837 pagetables:1484 bounce:0
>[ 1908.766478] DMA free:2012kB min:88kB low:108kB high:132kB active_anon:244kB inactive_anon:264kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15804kB mlocked:0kB dirty:0kB writeback:256kB mapped:0kB shmem:12kB slab_reclaimable:8kB slab_unreclaimable:188kB kernel_stack:0kB pagetables:12kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:814 all_unreclaimable? no
>[ 1908.766481] lowmem_reserve[]: 0 483 483 483
>[ 1908.766492] Normal free:2656kB min:2764kB low:3452kB high:4144kB active_anon:97188kB inactive_anon:97264kB active_file:0kB inactive_file:80kB unevictable:16kB isolated(anon):256kB isolated(file):0kB present:494664kB mlocked:16kB dirty:4kB writeback:31040kB mapped:528kB shmem:67336kB slab_reclaimable:9504kB slab_unreclaimable:23660kB kernel_stack:2448kB pagetables:5924kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:137581 all_unreclaimable? no
>[ 1908.766495] lowmem_reserve[]: 0 0 0 0
>[ 1908.766500] DMA: 35*4kB 22*8kB 16*16kB 23*32kB 9*64kB 1*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2012kB
>[ 1908.766512] Normal: 664*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2656kB
>[ 1908.766523] 30433 total pagecache pages
>[ 1908.766525] 13580 pages in swap cache
>[ 1908.766528] Swap cache stats: add 142458, delete 128878, find 38893/44119
>[ 1908.766530] Free swap  = 753732kB
>[ 1908.766531] Total swap = 1015804kB
>[ 1908.768803] 128720 pages RAM
>[ 1908.768806] 0 pages HighMem
>[ 1908.768808] 3801 pages reserved
>[ 1908.768809] 22933 pages shared
>[ 1908.768811] 100647 pages non-shared
>[ 1908.807547] 
>[ 1908.832889] Restarting tasks ... done.
>[ 1908.836326] PM: Basic memory bitmaps freed
>[ 1908.836563] video LNXVIDEO:01: Restoring backlight state
>[ 1908.897259] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1908.954239] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1909.011275] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1909.068242] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1928.254480] b43-phy0: Loading OpenSource firmware version 410.31754
>[ 1928.254487] b43-phy0: Hardware crypto acceleration not supported by firmware
>[ 1928.344276] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 1928.961091] 8139too 0000:05:01.0: em1: link down
>[ 1928.961282] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[ 1934.766207] wlan0: authenticate with 5c:33:8e:ad:84:ec
>[ 1934.767885] wlan0: send auth to 5c:33:8e:ad:84:ec (try 1/3)
>[ 1934.769957] wlan0: authenticated
>[ 1934.772284] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1934.773114] wlan0: associate with 5c:33:8e:ad:84:ec (try 1/3)
>[ 1934.775864] wlan0: RX AssocResp from 5c:33:8e:ad:84:ec (capab=0xc31 status=0 aid=2)
>[ 1934.777831] wlan0: associated
>[ 1934.777867] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 1934.782355] cfg80211: Calling CRDA for country: CL
>[ 1936.146285] cfg80211: Regulatory domain changed to country: CL
>[ 1936.146317] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1936.146320] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1936.146323] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1936.146347] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1936.146349] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1955.739877] wlan0: deauthenticating from 5c:33:8e:ad:84:ec by local choice (reason=3)
>[ 1955.744857] cfg80211: Calling CRDA to update world regulatory domain
>[ 1955.981838] cfg80211: World regulatory domain updated:
>[ 1955.981867] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1955.981870] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1955.981873] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1955.981897] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1955.981900] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1955.981903] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1955.981992] cfg80211: Calling CRDA for country: CL
>[ 1956.125478] cfg80211: Regulatory domain changed to country: CL
>[ 1956.125483] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1956.125508] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1956.125511] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1956.125513] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1956.125516] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1960.889191] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[ 1960.889220] PM: Basic memory bitmaps created
>[ 1960.889222] PM: Syncing filesystems ... done.
>[ 1961.220887] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 1961.233703] PM: Preallocating image memory... done (allocated 73889 pages)
>[ 1963.896712] PM: Allocated 295556 kbytes in 2.66 seconds (111.11 MB/s)
>[ 1963.896716] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 1963.917087] Suspending console(s) (use no_console_suspend to debug)
>[ 1963.917477] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 1963.921283] ACPI handle has no context!
>[ 1964.333153] PM: freeze of devices complete after 416.032 msecs
>[ 1964.333513] PM: late freeze of devices complete after 0.356 msecs
>[ 1964.335567] PM: noirq freeze of devices complete after 2.006 msecs
>[ 1964.335753] ACPI: Preparing to enter system sleep state S4
>[ 1964.390148] PM: Saving platform NVS memory
>[ 1964.390721] Disabling non-boot CPUs ...
>[ 1964.390876] Extended CMOS year: 2000
>[ 1964.391019] PM: Creating hibernation image:
>[ 1964.391019] PM: Need to copy 52959 pages
>[ 1964.391019] PM: Normal pages needed: 52959 + 1024, available pages: 75653
>[ 1964.391019] PM: Restoring platform NVS memory
>[ 1964.391019] Extended CMOS year: 2000
>[ 1964.391019] CPU0: Thermal monitoring handled by SMI
>[ 1964.391390] ACPI: Waking up from system sleep state S4
>[ 1964.503438] PM: noirq restore of devices complete after 35.255 msecs
>[ 1964.503669] PM: early restore of devices complete after 0.131 msecs
>[ 1964.575307] i915 0000:00:02.0: setting latency timer to 64
>[ 1964.734947] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[ 1964.735303] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 1964.735397] usb usb2: root hub lost power or was reset
>[ 1964.735455] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 1964.735523] usb usb3: root hub lost power or was reset
>[ 1964.735558] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 1964.735625] usb usb4: root hub lost power or was reset
>[ 1964.735683] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[ 1964.735750] usb usb5: root hub lost power or was reset
>[ 1964.735787] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 1964.735872] usb usb1: root hub lost power or was reset
>[ 1964.739780] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[ 1964.739847] ata_piix 0000:00:1f.2: setting latency timer to 64
>[ 1964.749232] pci 0000:00:1e.0: setting latency timer to 64
>[ 1964.903466] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 1964.903494] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[ 1964.905441] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 1964.905466] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[ 1964.910776] ata2.00: configured for UDMA/33
>[ 1964.911072] ata1.00: configured for UDMA/100
>[ 1964.911261] sd 0:0:0:0: [sda] Starting disk
>[ 1964.994720] Extended CMOS year: 2000
>[ 1965.303161] firewire_core 0000:05:06.0: rediscovered device fw0
>[ 1965.591445] PM: restore of devices complete after 1016.671 msecs
>[ 1965.591917] PM: Image restored successfully.
>[ 1965.591920] Restarting tasks ... done.
>[ 1965.607872] PM: Basic memory bitmaps freed
>[ 1965.608643] video LNXVIDEO:01: Restoring backlight state
>[ 1965.684567] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1965.746963] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1965.812485] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1965.876544] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 1987.849161] b43-phy0: Loading OpenSource firmware version 410.31754
>[ 1987.849191] b43-phy0: Hardware crypto acceleration not supported by firmware
>[ 1987.932795] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 1988.540247] 8139too 0000:05:01.0: em1: link down
>[ 1988.541550] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[ 1994.985836] wlan0: authenticate with 5c:33:8e:ad:84:ec
>[ 1994.988316] wlan0: send auth to 5c:33:8e:ad:84:ec (try 1/3)
>[ 1994.990303] wlan0: authenticated
>[ 1994.993924] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1994.995108] wlan0: associate with 5c:33:8e:ad:84:ec (try 1/3)
>[ 1994.997923] wlan0: RX AssocResp from 5c:33:8e:ad:84:ec (capab=0xc31 status=0 aid=2)
>[ 1995.001061] wlan0: associated
>[ 1995.001122] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 1995.001702] cfg80211: Calling CRDA for country: CL
>[ 1995.807961] cfg80211: Regulatory domain changed to country: CL
>[ 1995.807991] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1995.807994] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1995.808006] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1995.808120] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1995.808123] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2035.580927] wlan0: deauthenticating from 5c:33:8e:ad:84:ec by local choice (reason=3)
>[ 2035.586227] cfg80211: Calling CRDA to update world regulatory domain
>[ 2035.757931] cfg80211: World regulatory domain updated:
>[ 2035.757937] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2035.757962] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2035.757965] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2035.757968] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2035.757971] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2035.757996] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2035.758831] cfg80211: Calling CRDA for country: CL
>[ 2035.801121] cfg80211: Regulatory domain changed to country: CL
>[ 2035.801152] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2035.801155] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2035.801158] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2035.801182] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2035.801185] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2038.781269] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[ 2038.781298] PM: Basic memory bitmaps created
>[ 2038.781300] PM: Syncing filesystems ... done.
>[ 2038.897632] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 2038.910787] PM: Preallocating image memory... done (allocated 76072 pages)
>[ 2041.889088] PM: Allocated 304288 kbytes in 2.97 seconds (102.45 MB/s)
>[ 2041.889093] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 2041.901056] Suspending console(s) (use no_console_suspend to debug)
>[ 2041.904795] ACPI handle has no context!
>[ 2042.102125] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 2042.317130] PM: freeze of devices complete after 416.044 msecs
>[ 2042.317601] PM: late freeze of devices complete after 0.444 msecs
>[ 2042.319661] PM: noirq freeze of devices complete after 2.034 msecs
>[ 2042.319846] ACPI: Preparing to enter system sleep state S4
>[ 2042.372155] PM: Saving platform NVS memory
>[ 2042.372732] Disabling non-boot CPUs ...
>[ 2042.372888] Extended CMOS year: 2000
>[ 2042.373028] PM: Creating hibernation image:
>[ 2042.373028] PM: Need to copy 51138 pages
>[ 2042.373028] PM: Normal pages needed: 51138 + 1024, available pages: 77474
>[ 2042.373028] PM: Restoring platform NVS memory
>[ 2042.373028] Extended CMOS year: 2000
>[ 2042.373028] CPU0: Thermal monitoring handled by SMI
>[ 2042.373425] ACPI: Waking up from system sleep state S4
>[ 2042.487475] PM: noirq restore of devices complete after 35.334 msecs
>[ 2042.487731] PM: early restore of devices complete after 0.155 msecs
>[ 2042.557591] i915 0000:00:02.0: setting latency timer to 64
>[ 2042.698858] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[ 2042.699207] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 2042.699279] usb usb2: root hub lost power or was reset
>[ 2042.699337] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 2042.699403] usb usb3: root hub lost power or was reset
>[ 2042.699438] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 2042.699529] usb usb4: root hub lost power or was reset
>[ 2042.699564] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[ 2042.699627] usb usb5: root hub lost power or was reset
>[ 2042.699664] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 2042.699729] usb usb1: root hub lost power or was reset
>[ 2042.703697] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[ 2042.703766] ata_piix 0000:00:1f.2: setting latency timer to 64
>[ 2042.717085] pci 0000:00:1e.0: setting latency timer to 64
>[ 2042.866920] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 2042.866924] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[ 2042.872831] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 2042.872834] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[ 2042.873868] ata1.00: configured for UDMA/100
>[ 2042.874121] sd 0:0:0:0: [sda] Starting disk
>[ 2042.880037] ata2.00: configured for UDMA/33
>[ 2042.959457] Extended CMOS year: 2000
>[ 2043.271187] firewire_core 0000:05:06.0: rediscovered device fw0
>[ 2043.609021] PM: restore of devices complete after 1052.041 msecs
>[ 2043.609573] PM: Image restored successfully.
>[ 2043.609576] Restarting tasks ... done.
>[ 2043.623452] PM: Basic memory bitmaps freed
>[ 2043.624345] video LNXVIDEO:01: Restoring backlight state
>[ 2043.700089] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2043.765596] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2043.830860] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2043.894289] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2060.276214] b43-phy0: Loading OpenSource firmware version 410.31754
>[ 2060.276250] b43-phy0: Hardware crypto acceleration not supported by firmware
>[ 2060.370842] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 2060.457332] 8139too 0000:05:01.0: em1: link down
>[ 2060.457547] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[ 2066.148940] wlan0: authenticate with 5c:33:8e:ad:84:ec
>[ 2066.151540] wlan0: send auth to 5c:33:8e:ad:84:ec (try 1/3)
>[ 2066.164171] wlan0: authenticated
>[ 2066.171666] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported
>[ 2066.176072] wlan0: associate with 5c:33:8e:ad:84:ec (try 1/3)
>[ 2066.178752] wlan0: RX AssocResp from 5c:33:8e:ad:84:ec (capab=0xc31 status=0 aid=3)
>[ 2066.181333] wlan0: associated
>[ 2066.181402] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 2066.185159] cfg80211: Calling CRDA for country: CL
>[ 2067.559919] cfg80211: Regulatory domain changed to country: CL
>[ 2067.559948] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2067.559951] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2067.559976] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2067.559978] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2067.559981] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2107.576398] wlan0: deauthenticating from 5c:33:8e:ad:84:ec by local choice (reason=3)
>[ 2107.583084] cfg80211: Calling CRDA to update world regulatory domain
>[ 2107.648802] cfg80211: World regulatory domain updated:
>[ 2107.648830] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2107.648834] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2107.648858] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2107.648861] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2107.648864] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2107.648867] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2107.648961] cfg80211: Calling CRDA for country: CL
>[ 2107.661892] cfg80211: Regulatory domain changed to country: CL
>[ 2107.661920] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2107.661923] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2107.661926] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2107.661929] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2107.661953] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2110.995185] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[ 2110.995214] PM: Basic memory bitmaps created
>[ 2110.995216] PM: Syncing filesystems ... done.
>[ 2111.500284] Freezing user space processes ... (elapsed 0.04 seconds) done.
>[ 2111.545599] PM: Preallocating image memory... 
>[ 2111.575174] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 2111.576802] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 2111.578521] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 2111.580146] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 2111.582347] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 2111.582373] psmouse serio4: issuing reconnect request
>[ 2112.619330] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 4
>[ 2112.631321] psmouse serio4: TouchPad at isa0060/serio4/input0 - driver resynced.
>[ 2113.157952] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 4
>[ 2113.159515] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 2113.169967] psmouse serio4: TouchPad at isa0060/serio4/input0 - driver resynced.
>[ 2113.213608] done (allocated 76083 pages)
>[ 2113.213640] PM: Allocated 304332 kbytes in 1.66 seconds (183.33 MB/s)
>[ 2113.222752] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 2113.213664] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 2113.227711] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 2113.232615] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 2113.233113] Suspending console(s) (use no_console_suspend to debug)
>[ 2113.234235] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 2113.237214] ACPI handle has no context!
>[ 2113.243846] psmouse serio4: TouchPad at isa0060/serio4/input0 - driver resynced.
>[ 2113.649131] PM: freeze of devices complete after 416.011 msecs
>[ 2113.649544] PM: late freeze of devices complete after 0.386 msecs
>[ 2113.651542] PM: noirq freeze of devices complete after 1.994 msecs
>[ 2113.651776] ACPI: Preparing to enter system sleep state S4
>[ 2113.710154] PM: Saving platform NVS memory
>[ 2113.710853] Disabling non-boot CPUs ...
>[ 2113.711012] Extended CMOS year: 2000
>[ 2113.711024] PM: Creating hibernation image:
>[ 2113.711024] PM: Need to copy 49931 pages
>[ 2113.711024] PM: Normal pages needed: 49931 + 1024, available pages: 78681
>[ 2113.711024] PM: Restoring platform NVS memory
>[ 2113.711024] Extended CMOS year: 2000
>[ 2113.711024] CPU0: Thermal monitoring handled by SMI
>[ 2113.711164] ACPI: Waking up from system sleep state S4
>[ 2113.809465] PM: noirq restore of devices complete after 33.410 msecs
>[ 2113.809661] PM: early restore of devices complete after 0.052 msecs
>[ 2113.831683] i915 0000:00:02.0: setting latency timer to 64
>[ 2113.878149] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[ 2113.878231] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 2113.878259] usb usb2: root hub lost power or was reset
>[ 2113.878274] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 2113.878299] usb usb3: root hub lost power or was reset
>[ 2113.878312] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 2113.878337] usb usb4: root hub lost power or was reset
>[ 2113.878350] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[ 2113.878375] usb usb5: root hub lost power or was reset
>[ 2113.878390] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 2113.878410] usb usb1: root hub lost power or was reset
>[ 2113.882289] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[ 2113.882312] ata_piix 0000:00:1f.2: setting latency timer to 64
>[ 2113.884364] pci 0000:00:1e.0: setting latency timer to 64
>[ 2114.037264] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 2114.037268] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[ 2114.038555] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 2114.038558] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[ 2114.043570] ata1.00: configured for UDMA/100
>[ 2114.043623] sd 0:0:0:0: [sda] Starting disk
>[ 2114.046477] ata2.00: configured for UDMA/33
>[ 2114.129507] Extended CMOS year: 2000
>[ 2114.438054] firewire_core 0000:05:06.0: rediscovered device fw0
>[ 2114.690123] PM: restore of devices complete after 858.610 msecs
>[ 2114.690253] PM: Image restored successfully.
>[ 2114.690256] Restarting tasks ... done.
>[ 2114.693332] PM: Basic memory bitmaps freed
>[ 2114.693557] video LNXVIDEO:01: Restoring backlight state
>[ 2114.766543] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2114.830193] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2114.893038] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2114.956716] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2130.364049] b43-phy0: Loading OpenSource firmware version 410.31754
>[ 2130.364057] b43-phy0: Hardware crypto acceleration not supported by firmware
>[ 2130.420706] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 2130.694398] 8139too 0000:05:01.0: em1: link down
>[ 2130.694529] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[ 2200.705348] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 2204.371434] wlan0: authenticate with 5c:33:8e:ad:84:ec
>[ 2204.371797] wlan0: send auth to 5c:33:8e:ad:84:ec (try 1/3)
>[ 2204.373653] wlan0: authenticated
>[ 2204.373881] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported
>[ 2204.374036] wlan0: associate with 5c:33:8e:ad:84:ec (try 1/3)
>[ 2204.376294] wlan0: RX AssocResp from 5c:33:8e:ad:84:ec (capab=0xc31 status=0 aid=2)
>[ 2204.379089] wlan0: associated
>[ 2204.379134] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 2204.379214] cfg80211: Calling CRDA for country: CL
>[ 2204.604938] cfg80211: Regulatory domain changed to country: CL
>[ 2204.604945] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2204.604948] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2204.604950] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2204.604953] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2204.604956] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3171.335964] wlan0: deauthenticating from 5c:33:8e:ad:84:ec by local choice (reason=3)
>[ 3171.337259] cfg80211: Calling CRDA to update world regulatory domain
>[ 3171.604735] cfg80211: World regulatory domain updated:
>[ 3171.604743] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 3171.604746] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3171.604749] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 3171.604752] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 3171.604755] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3171.604758] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3171.604782] cfg80211: Calling CRDA for country: CL
>[ 3171.608881] cfg80211: Regulatory domain changed to country: CL
>[ 3171.608887] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 3171.608890] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3171.608893] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3171.608895] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3171.608898] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3174.002318] PM: Syncing filesystems ... done.
>[ 3174.003184] PM: Preparing system for mem sleep
>[ 3174.055790] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 3174.067144] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 3174.078091] PM: Entering mem sleep
>[ 3174.078134] Suspending console(s) (use no_console_suspend to debug)
>[ 3174.078408] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 3174.162072] ACPI handle has no context!
>[ 3174.202896] sd 0:0:0:0: [sda] Stopping disk
>[ 3174.643047] PM: suspend of devices complete after 564.743 msecs
>[ 3174.643180] PM: late suspend of devices complete after 0.128 msecs
>[ 3174.665263] PM: noirq suspend of devices complete after 22.080 msecs
>[ 3174.665417] ACPI: Preparing to enter system sleep state S3
>[ 3174.683057] PM: Saving platform NVS memory
>[ 3174.683243] Disabling non-boot CPUs ...
>[ 3174.683292] Extended CMOS year: 2000
>[ 3174.683292] ACPI: Low-level resume complete
>[ 3174.683292] PM: Restoring platform NVS memory
>[ 3174.683292] Extended CMOS year: 2000
>[ 3174.683292] CPU0: Thermal monitoring handled by SMI
>[ 3174.683292] ACPI: Waking up from system sleep state S3
>[ 3174.988087] firewire_ohci 0000:05:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[ 3174.988089] firewire_ohci 0000:05:06.0: MMC cards are now supported by standard SDHCI controller
>[ 3175.010369] PM: noirq resume of devices complete after 88.237 msecs
>[ 3175.010555] PM: early resume of devices complete after 0.050 msecs
>[ 3175.010614] i915 0000:00:02.0: setting latency timer to 64
>[ 3175.054620] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[ 3175.054694] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 3175.054725] usb usb2: root hub lost power or was reset
>[ 3175.054739] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 3175.054766] usb usb3: root hub lost power or was reset
>[ 3175.054779] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 3175.054805] usb usb4: root hub lost power or was reset
>[ 3175.054818] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[ 3175.054845] usb usb5: root hub lost power or was reset
>[ 3175.054860] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 3175.054886] pci 0000:00:1e.0: setting latency timer to 64
>[ 3175.054902] ata_piix 0000:00:1f.2: setting latency timer to 64
>[ 3175.054952] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3175.055966] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3175.262581] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 3175.262585] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[ 3175.268466] ata2.00: configured for UDMA/33
>[ 3175.609058] firewire_core 0000:05:06.0: rediscovered device fw0
>[ 3178.184256] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 3178.184260] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[ 3178.190583] ata1.00: configured for UDMA/100
>[ 3178.222794] sd 0:0:0:0: [sda] Starting disk
>[ 3178.222948] Extended CMOS year: 2000
>[ 3178.381141] PM: resume of devices complete after 3370.580 msecs
>[ 3178.381284] PM: Finishing wakeup.
>[ 3178.381286] Restarting tasks ... done.
>[ 3178.493802] video LNXVIDEO:01: Restoring backlight state
>[ 3178.563040] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3178.645052] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3178.708028] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3178.791032] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3179.154049] b43-phy0: Loading OpenSource firmware version 410.31754
>[ 3179.154058] b43-phy0: Hardware crypto acceleration not supported by firmware
>[ 3179.225666] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 3179.230846] 8139too 0000:05:01.0: em1: link down
>[ 3179.231888] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[ 3730.404671] PM: Syncing filesystems ... done.
>[ 3730.405577] PM: Preparing system for mem sleep
>[ 3730.463910] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 3730.475120] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 3730.486093] PM: Entering mem sleep
>[ 3730.486135] Suspending console(s) (use no_console_suspend to debug)
>[ 3730.486409] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 3730.522888] sd 0:0:0:0: [sda] Stopping disk
>[ 3730.570072] ACPI handle has no context!
>[ 3730.982046] PM: suspend of devices complete after 495.744 msecs
>[ 3730.982178] PM: late suspend of devices complete after 0.127 msecs
>[ 3731.004270] PM: noirq suspend of devices complete after 22.088 msecs
>[ 3731.004426] ACPI: Preparing to enter system sleep state S3
>[ 3731.021057] PM: Saving platform NVS memory
>[ 3731.021250] Disabling non-boot CPUs ...
>[ 3731.021298] Extended CMOS year: 2000
>[ 3731.021298] ACPI: Low-level resume complete
>[ 3731.021298] PM: Restoring platform NVS memory
>[ 3731.021298] Extended CMOS year: 2000
>[ 3731.021298] CPU0: Thermal monitoring handled by SMI
>[ 3731.021298] ACPI: Waking up from system sleep state S3
>[ 3731.326084] firewire_ohci 0000:05:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[ 3731.326087] firewire_ohci 0000:05:06.0: MMC cards are now supported by standard SDHCI controller
>[ 3731.348359] PM: noirq resume of devices complete after 88.280 msecs
>[ 3731.348544] PM: early resume of devices complete after 0.049 msecs
>[ 3731.348604] i915 0000:00:02.0: setting latency timer to 64
>[ 3731.386852] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[ 3731.386928] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 3731.386957] usb usb2: root hub lost power or was reset
>[ 3731.386971] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 3731.386998] usb usb3: root hub lost power or was reset
>[ 3731.387027] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 3731.387053] usb usb4: root hub lost power or was reset
>[ 3731.387066] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[ 3731.387093] usb usb5: root hub lost power or was reset
>[ 3731.387107] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 3731.387133] pci 0000:00:1e.0: setting latency timer to 64
>[ 3731.387150] ata_piix 0000:00:1f.2: setting latency timer to 64
>[ 3731.387200] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3731.388214] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3731.594578] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 3731.594581] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[ 3731.600468] ata2.00: configured for UDMA/33
>[ 3731.941055] firewire_core 0000:05:06.0: rediscovered device fw0
>[ 3734.058256] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 3734.058259] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[ 3734.064591] ata1.00: configured for UDMA/100
>[ 3734.096090] sd 0:0:0:0: [sda] Starting disk
>[ 3734.247134] PM: resume of devices complete after 2898.585 msecs
>[ 3734.247282] PM: Finishing wakeup.
>[ 3734.247284] Restarting tasks ... done.
>[ 3734.337518] video LNXVIDEO:01: Restoring backlight state
>[ 3734.402032] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3734.482031] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3734.589012] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3734.664822] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 3734.951046] b43-phy0: Loading OpenSource firmware version 410.31754
>[ 3734.951054] b43-phy0: Hardware crypto acceleration not supported by firmware
>[ 3735.034676] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 3735.039468] 8139too 0000:05:01.0: em1: link down
>[ 3735.041131] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[ 3735.277769] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 3735.279835] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 3735.281357] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 3735.283305] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 3735.284802] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>[ 3735.284806] psmouse serio4: issuing reconnect request
>[ 3741.665300] gnome-shell[1115]: segfault at 20 ip 4fcaa6ad sp bff4f350 error 4 in libgnome-shell.so[4fc78000+9a000]
>[ 3788.571695] psmouse serio4: TouchPad at isa0060/serio4/input0 lost sync at byte 4
>[ 3788.585827] psmouse serio4: TouchPad at isa0060/serio4/input0 - driver resynced.
>[ 3799.711072] b43-phy0: Loading OpenSource firmware version 410.31754
>[ 3799.711081] b43-phy0: Hardware crypto acceleration not supported by firmware
>[ 3799.779596] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 3805.041676] wlan0: authenticate with 5c:33:8e:ad:84:ec
>[ 3805.042402] wlan0: send auth to 5c:33:8e:ad:84:ec (try 1/3)
>[ 3805.044081] wlan0: authenticated
>[ 3805.045591] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported
>[ 3805.046041] wlan0: associate with 5c:33:8e:ad:84:ec (try 1/3)
>[ 3805.048190] wlan0: RX AssocResp from 5c:33:8e:ad:84:ec (capab=0xc31 status=0 aid=3)
>[ 3805.048758] wlan0: associated
>[ 3805.048793] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 3805.048872] cfg80211: Calling CRDA for country: CL
>[ 3805.095192] cfg80211: Regulatory domain changed to country: CL
>[ 3805.095200] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 3805.095203] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3805.095206] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3805.095208] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3805.095211] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3818.189791] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 4485.047519] wlan0: deauthenticating from 5c:33:8e:ad:84:ec by local choice (reason=3)
>[ 4485.050296] cfg80211: Calling CRDA to update world regulatory domain
>[ 4489.588506] cfg80211: World regulatory domain updated:
>[ 4489.588514] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 4489.588518] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4489.588521] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 4489.588524] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 4489.588527] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4489.588530] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4489.588553] cfg80211: Calling CRDA for country: CL
>[ 4489.623332] cfg80211: Regulatory domain changed to country: CL
>[ 4489.623338] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 4489.623341] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 4489.623344] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 4489.623346] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 4489.623349] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 4493.357155] PM: Syncing filesystems ... done.
>[ 4493.358182] PM: Preparing system for mem sleep
>[ 4493.551247] Freezing user space processes ... (elapsed 0.19 seconds) done.
>[ 4493.749107] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 4493.760115] PM: Entering mem sleep
>[ 4493.760158] Suspending console(s) (use no_console_suspend to debug)
>[ 4493.760435] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 4493.800692] sd 0:0:0:0: [sda] Stopping disk
>[ 4493.848080] ACPI handle has no context!
>[ 4494.261047] PM: suspend of devices complete after 500.719 msecs
>[ 4494.261189] PM: late suspend of devices complete after 0.138 msecs
>[ 4494.283264] PM: noirq suspend of devices complete after 22.071 msecs
>[ 4494.283420] ACPI: Preparing to enter system sleep state S3
>[ 4494.297057] PM: Saving platform NVS memory
>[ 4494.297255] Disabling non-boot CPUs ...
>[ 4494.297304] Extended CMOS year: 2000
>[ 4494.297304] ACPI: Low-level resume complete
>[ 4494.297304] PM: Restoring platform NVS memory
>[ 4494.297304] Extended CMOS year: 2000
>[ 4494.297304] CPU0: Thermal monitoring handled by SMI
>[ 4494.297304] ACPI: Waking up from system sleep state S3
>[ 4494.601085] firewire_ohci 0000:05:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[ 4494.601088] firewire_ohci 0000:05:06.0: MMC cards are now supported by standard SDHCI controller
>[ 4494.623358] PM: noirq resume of devices complete after 88.278 msecs
>[ 4494.623544] PM: early resume of devices complete after 0.050 msecs
>[ 4494.623606] i915 0000:00:02.0: setting latency timer to 64
>[ 4494.668720] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[ 4494.668797] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 4494.668828] usb usb2: root hub lost power or was reset
>[ 4494.668842] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 4494.668869] usb usb3: root hub lost power or was reset
>[ 4494.668882] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 4494.668909] usb usb4: root hub lost power or was reset
>[ 4494.668921] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[ 4494.668949] usb usb5: root hub lost power or was reset
>[ 4494.668963] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 4494.668990] pci 0000:00:1e.0: setting latency timer to 64
>[ 4494.669027] ata_piix 0000:00:1f.2: setting latency timer to 64
>[ 4494.669078] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 4494.670092] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 4494.876591] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 4494.876595] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[ 4494.882460] ata2.00: configured for UDMA/33
>[ 4495.223055] firewire_core 0000:05:06.0: rediscovered device fw0
>[ 4497.900257] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 4497.900261] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[ 4497.906592] ata1.00: configured for UDMA/100
>[ 4497.938754] sd 0:0:0:0: [sda] Starting disk
>[ 4497.938909] Extended CMOS year: 2000
>[ 4498.089133] PM: resume of devices complete after 3465.583 msecs
>[ 4498.089276] PM: Finishing wakeup.
>[ 4498.089278] Restarting tasks ... done.
>[ 4498.200623] video LNXVIDEO:01: Restoring backlight state
>[ 4498.262906] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 4498.323034] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 4498.386669] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 4498.447559] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 4498.959045] b43-phy0: Loading OpenSource firmware version 410.31754
>[ 4498.959054] b43-phy0: Hardware crypto acceleration not supported by firmware
>[ 4499.067699] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 4499.075930] 8139too 0000:05:01.0: em1: link down
>[ 4499.076644] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[ 4501.341063] wlan0: authenticate with 5c:33:8e:ad:84:ec
>[ 4501.349403] wlan0: send auth to 5c:33:8e:ad:84:ec (try 1/3)
>[ 4501.352119] wlan0: authenticated
>[ 4501.352362] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported
>[ 4501.353046] wlan0: associate with 5c:33:8e:ad:84:ec (try 1/3)
>[ 4501.355499] wlan0: RX AssocResp from 5c:33:8e:ad:84:ec (capab=0xc31 status=0 aid=5)
>[ 4501.355825] wlan0: associated
>[ 4501.355864] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 4501.355944] cfg80211: Calling CRDA for country: CL
>[ 4501.371503] cfg80211: Regulatory domain changed to country: CL
>[ 4501.371510] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 4501.371513] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 4501.371515] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 4501.371518] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 4501.371521] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 4579.101525] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 6893.633092] wlan0: deauthenticating from 5c:33:8e:ad:84:ec by local choice (reason=3)
>[ 6893.635563] cfg80211: Calling CRDA to update world regulatory domain
>[ 6896.563799] cfg80211: World regulatory domain updated:
>[ 6896.563829] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 6896.563854] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 6896.563857] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 6896.563860] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 6896.563863] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 6896.563887] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 6896.563952] cfg80211: Calling CRDA for country: CL
>[ 6896.613200] cfg80211: Regulatory domain changed to country: CL
>[ 6896.613229] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 6896.613232] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6896.613235] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6896.613259] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6896.613262] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6901.700223] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[ 6901.700253] PM: Basic memory bitmaps created
>[ 6901.700256] PM: Syncing filesystems ... done.
>[ 6902.100866] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 6902.113543] PM: Preallocating image memory... done (allocated 78862 pages)
>[ 6909.920797] PM: Allocated 315448 kbytes in 7.80 seconds (40.44 MB/s)
>[ 6909.920801] Freezing remaining freezable tasks ... (elapsed 0.11 seconds) done.
>[ 6910.032862] Suspending console(s) (use no_console_suspend to debug)
>[ 6910.037215] ACPI handle has no context!
>[ 6910.234123] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 6910.451158] PM: freeze of devices complete after 418.264 msecs
>[ 6910.451636] PM: late freeze of devices complete after 0.450 msecs
>[ 6910.453665] PM: noirq freeze of devices complete after 2.025 msecs
>[ 6910.453842] ACPI: Preparing to enter system sleep state S4
>[ 6910.506161] PM: Saving platform NVS memory
>[ 6910.506794] Disabling non-boot CPUs ...
>[ 6910.506953] Extended CMOS year: 2000
>[ 6910.507029] PM: Creating hibernation image:
>[ 6910.507029] PM: Need to copy 47566 pages
>[ 6910.507029] PM: Normal pages needed: 47566 + 1024, available pages: 81046
>[ 6910.507029] PM: Restoring platform NVS memory
>[ 6910.507029] Extended CMOS year: 2000
>[ 6910.507029] CPU0: Thermal monitoring handled by SMI
>[ 6910.507116] ACPI: Waking up from system sleep state S4
>[ 6910.602460] PM: noirq restore of devices complete after 33.405 msecs
>[ 6910.602539] PM: early restore of devices complete after 0.043 msecs
>[ 6910.623181] i915 0000:00:02.0: setting latency timer to 64
>[ 6910.628380] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[ 6910.628457] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 6910.628485] usb usb2: root hub lost power or was reset
>[ 6910.628499] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 6910.628523] usb usb3: root hub lost power or was reset
>[ 6910.628537] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 6910.628561] usb usb4: root hub lost power or was reset
>[ 6910.628575] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[ 6910.628600] usb usb5: root hub lost power or was reset
>[ 6910.628614] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 6910.628633] usb usb1: root hub lost power or was reset
>[ 6910.632537] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[ 6910.632560] ata_piix 0000:00:1f.2: setting latency timer to 64
>[ 6910.632670] pci 0000:00:1e.0: setting latency timer to 64
>[ 6910.787266] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 6910.787270] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[ 6910.788559] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 6910.788562] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
>[ 6910.793507] ata1.00: configured for UDMA/100
>[ 6910.793561] sd 0:0:0:0: [sda] Starting disk
>[ 6910.794480] ata2.00: configured for UDMA/33
>[ 6911.188061] firewire_core 0000:05:06.0: rediscovered device fw0
>[ 6911.486162] PM: restore of devices complete after 863.143 msecs
>[ 6911.486352] PM: Image restored successfully.
>[ 6911.486354] Restarting tasks ... done.
>[ 6911.490591] PM: Basic memory bitmaps freed
>[ 6911.490830] video LNXVIDEO:01: Restoring backlight state
>[ 6911.579560] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 6911.641402] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 6911.704278] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 6911.768364] sdhci-pci 0000:05:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 6930.421049] b43-phy0: Loading OpenSource firmware version 410.31754
>[ 6930.421057] b43-phy0: Hardware crypto acceleration not supported by firmware
>[ 6930.475696] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 6946.665248] 8139too 0000:05:01.0: em1: link down
>[ 6946.665385] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[ 6949.969196] wlan0: authenticate with 5c:33:8e:ad:84:ec
>[ 6949.973361] wlan0: send auth to 5c:33:8e:ad:84:ec (try 1/3)
>[ 6949.974883] wlan0: authenticated
>[ 6949.975192] b43 ssb0:0: wlan0: disabling HT as WMM/QoS is not supported
>[ 6949.976036] wlan0: associate with 5c:33:8e:ad:84:ec (try 1/3)
>[ 6949.980073] wlan0: RX AssocResp from 5c:33:8e:ad:84:ec (capab=0xc31 status=0 aid=4)
>[ 6949.983104] wlan0: associated
>[ 6949.983145] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 6949.983226] cfg80211: Calling CRDA for country: CL
>[ 6950.856116] cfg80211: Regulatory domain changed to country: CL
>[ 6950.856124] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 6950.856127] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6950.856130] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6950.856132] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6950.856135] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)

Actions: View

Attachments on bug 890220: 669005 | 669006 | 669007 | 669008 | 669009 | 669010