Attachment 669860 Details for Bug 890653 – File: dmesg

File: dmesg

dmesg (text/plain), 187.08 KB, created by Václav Jansa on 2012-12-28 13:56:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Václav Jansa

Created: 2012-12-28 13:56:02 UTC

Size: 187.08 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 3.6.10-2.fc17.x86_64 (mockbuild@) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #1 SMP Tue Dec 11 18:07:34 UTC 2012
>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.6.10-2.fc17.x86_64 root=/dev/mapper/vg_mozart-root ro rd.md=0 rd.dm=0 rd.lvm.lv=vg_mozart/root KEYTABLE=us quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 rd.lvm.lv=vg_mozart/swap LANG=en_US.UTF-8
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000beebdfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000beebe000-0x00000000bf6bdfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000bf6be000-0x00000000bf7bdfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000bf7be000-0x00000000bf7fefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023dffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI 2.6 present.
>[    0.000000] DMI: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.08 08/26/2011
>[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x23e000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
>[    0.000000]   1 base 000000000 mask F80000000 write-back
>[    0.000000]   2 base 080000000 mask FC0000000 write-back
>[    0.000000]   3 base 100000000 mask F00000000 write-back
>[    0.000000]   4 base 200000000 mask FC0000000 write-back
>[    0.000000]   5 base 23E000000 mask FFE000000 uncachable
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
>[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
>[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
>[    0.000000] init_memory_mapping: [mem 0x00000000-0xbf7fffff]
>[    0.000000]  [mem 0x00000000-0xbf7fffff] page 2M
>[    0.000000] kernel direct mapping tables up to 0xbf7fffff @ [mem 0x1fffc000-0x1fffffff]
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x23dffffff]
>[    0.000000]  [mem 0x100000000-0x23dffffff] page 2M
>[    0.000000] kernel direct mapping tables up to 0x23dffffff @ [mem 0xbeeb8000-0xbeebdfff]
>[    0.000000] RAMDISK: [mem 0x35c86000-0x36e3afff]
>[    0.000000] ACPI: RSDP 00000000000f2f60 00024 (v02 HPQOEM)
>[    0.000000] ACPI: XSDT 00000000bf7fe120 00084 (v01 HPQOEM SLIC-MPC 0000000F      01000013)
>[    0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v03 HPQOEM 161E     0000000F HP   00000001)
>[    0.000000] ACPI: DSDT 00000000bf7d2000 24780 (v02 HPQOEM 161E     00000001 INTL 20060912)
>[    0.000000] ACPI: FACS 00000000bf7a6000 00040
>[    0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 HPQOEM 161E     00000001 HP   00000001)
>[    0.000000] ACPI: APIC 00000000bf7fa000 000BC (v01 HPQOEM 161E     00000001 HP   00000001)
>[    0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 HPQOEM 161E     00000001 HP   00000001)
>[    0.000000] ACPI: TCPA 00000000bf7f7000 00032 (v02 HPQOEM 161E     00000000 HP   00000001)
>[    0.000000] ACPI: SSDT 00000000bf7cf000 00266 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
>[    0.000000] ACPI: SSDT 00000000bf7ce000 0048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
>[    0.000000] ACPI: SLIC 00000000bf7cd000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
>[    0.000000] ACPI: SSDT 00000000bf7cc000 00810 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
>[    0.000000] ACPI: SSDT 00000000bf7cb000 009B1 (v01  PmRef    CpuPm 00003000 INTL 20060912)
>[    0.000000] ACPI: DMAR 00000000bf7ca000 000B0 (v01 INTEL      SNB  00000001 INTL 00000001)
>[    0.000000] ACPI: ASF! 00000000bf7f8000 000A5 (v32 HPQOEM 161E     00000001 HP   00000001)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023dffffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23dffffff]
>[    0.000000]   NODE_DATA [mem 0x23dfec000-0x23dffffff]
>[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880235600000-ffff88023d5fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x23dffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00010000-0x0009dfff]
>[    0.000000]   node   0: [mem 0x00100000-0xbeebdfff]
>[    0.000000]   node   0: [mem 0xbf7ff000-0xbf7fffff]
>[    0.000000]   node   0: [mem 0x100000000-0x23dffffff]
>[    0.000000] On node 0 totalpages: 2084429
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 6 pages reserved
>[    0.000000]   DMA zone: 3912 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 16320 pages used for memmap
>[    0.000000]   DMA32 zone: 761599 pages, LIFO batch:31
>[    0.000000]   Normal zone: 20352 pages used for memmap
>[    0.000000]   Normal zone: 1282176 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>[    0.000000] PM: Registered nosave memory: 00000000beebe000 - 00000000bf6be000
>[    0.000000] PM: Registered nosave memory: 00000000bf6be000 - 00000000bf7be000
>[    0.000000] PM: Registered nosave memory: 00000000bf7be000 - 00000000bf7ff000
>[    0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
>[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
>[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
>[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
>[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
>[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
>[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
>[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
>[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
>[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
>[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
>[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000
>[    0.000000] PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
>[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023dc00000 s84288 r8192 d22208 u262144
>[    0.000000] pcpu-alloc: s84288 r8192 d22208 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2047687
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.6.10-2.fc17.x86_64 root=/dev/mapper/vg_mozart-root ro rd.md=0 rd.dm=0 rd.lvm.lv=vg_mozart/root KEYTABLE=us quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 rd.lvm.lv=vg_mozart/swap LANG=en_US.UTF-8
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] __ex_table already sorted, skipping sort
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Memory: 8105256k/9404416k available (6315k kernel code, 1066700k absent, 232460k reserved, 6887k data, 1032k init)
>[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
>[    0.000000] NR_IRQS:8448 nr_irqs:744 16
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] allocated 33554432 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration failed
>[    0.002000] tsc: PIT calibration matches HPET. 1 loops
>[    0.002000] tsc: Detected 2593.960 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.92 BogoMIPS (lpj=2593960)
>[    0.000004] pid_max: default: 32768 minimum: 301
>[    0.000029] Security Framework initialized
>[    0.000035] SELinux:  Initializing.
>[    0.000041] SELinux:  Starting in permissive mode
>[    0.000650] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.002256] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.002905] Mount-cache hash table entries: 256
>[    0.003064] Initializing cgroup subsys cpuacct
>[    0.003065] Initializing cgroup subsys memory
>[    0.003075] Initializing cgroup subsys devices
>[    0.003076] Initializing cgroup subsys freezer
>[    0.003077] Initializing cgroup subsys net_cls
>[    0.003078] Initializing cgroup subsys blkio
>[    0.003079] Initializing cgroup subsys perf_event
>[    0.003118] CPU: Physical Processor ID: 0
>[    0.003119] CPU: Processor Core ID: 0
>[    0.003123] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.003123] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.003125] mce: CPU supports 7 MCE banks
>[    0.003135] CPU0: Thermal monitoring enabled (TM1)
>[    0.003142] process: using mwait in idle threads
>[    0.003145] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
>[    0.003145] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
>[    0.003145] tlb_flushall_shift is 0x5
>[    0.004456] ACPI: Core revision 20120711
>[    0.025138] ftrace: allocating 23454 entries in 92 pages
>[    0.036037] dmar: Host address width 36
>[    0.036040] dmar: DRHD base: 0x000000fed91000 flags: 0x1
>[    0.036047] dmar: IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
>[    0.036048] dmar: RMRR base: 0x000000bf69b000 end: 0x000000bf6bafff
>[    0.036117] IOAPIC id 0 under DRHD base  0xfed91000 IOMMU 0
>[    0.036118] HPET id 0 under DRHD base 0xfed91000
>[    0.036119] HPET id 0 under DRHD base 0xfed91000
>[    0.036120] HPET id 0 under DRHD base 0xfed91000
>[    0.036121] HPET id 0 under DRHD base 0xfed91000
>[    0.036122] HPET id 0 under DRHD base 0xfed91000
>[    0.036122] HPET id 0 under DRHD base 0xfed91000
>[    0.036123] HPET id 0 under DRHD base 0xfed91000
>[    0.036124] HPET id 0 under DRHD base 0xfed91000
>[    0.036209] Enabled IRQ remapping in x2apic mode
>[    0.036210] Enabling x2apic
>[    0.036211] Enabled x2apic
>[    0.036216] Switched APIC routing to cluster x2apic.
>[    0.036655] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.046638] smpboot: CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz stepping 07
>[    0.147822] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
>[    0.147827] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
>[    0.147829] ... version:                3
>[    0.147830] ... bit width:              48
>[    0.147830] ... generic registers:      4
>[    0.147831] ... value mask:             0000ffffffffffff
>[    0.147832] ... max period:             000000007fffffff
>[    0.147833] ... fixed-purpose events:   3
>[    0.147834] ... event mask:             000000070000000f
>[    0.148321] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.148415] smpboot: Booting Node   0, Processors  #1 #2 #3
>[    0.187969] Brought up 4 CPUs
>[    0.187972] smpboot: Total of 4 processors activated (20751.68 BogoMIPS)
>[    0.191030] devtmpfs: initialized
>[    0.191205] PM: Registering ACPI NVS region [mem 0xbf6be000-0xbf7bdfff] (1048576 bytes)
>[    0.191800] atomic64 test passed for x86-64 platform with CX8 and with SSE
>[    0.191826] RTC time: 20:07:08, date: 12/18/12
>[    0.191862] NET: Registered protocol family 16
>[    0.192001] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.192003] ACPI: bus type pci registered
>[    0.192063] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.192065] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.210762] PCI: Using configuration type 1 for base access
>[    0.211415] bio: create slab <bio-0> at 0
>[    0.211473] ACPI: Added _OSI(Module Device)
>[    0.211475] ACPI: Added _OSI(Processor Device)
>[    0.211476] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.211477] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.213010] ACPI: EC: Look up EC in DSDT
>[    0.214800] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.223760] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.239648] ACPI: SSDT 00000000bf646718 0069C (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
>[    0.240033] ACPI: Dynamic OEM Table Load:
>[    0.240035] ACPI: SSDT           (null) 0069C (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
>[    0.242905] ACPI: SSDT 00000000bf647a98 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
>[    0.243315] ACPI: Dynamic OEM Table Load:
>[    0.243317] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
>[    0.245791] ACPI: SSDT 00000000bf645d98 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
>[    0.246176] ACPI: Dynamic OEM Table Load:
>[    0.246177] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
>[    0.675244] ACPI: Interpreter enabled
>[    0.675247] ACPI: (supports S0 S3 S4 S5)
>[    0.675262] ACPI: Using IOAPIC for interrupt routing
>[    0.676473] ACPI: Power Resource [APPR] (off)
>[    0.680353] ACPI: Power Resource [COMP] (on)
>[    0.680617] ACPI: Power Resource [LPP] (on)
>[    0.682689] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>[    0.682855] ACPI: No dock devices found.
>[    0.682858] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.683390] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.683840] PCI host bridge to bus 0000:00
>[    0.683843] pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff]
>[    0.683844] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.683846] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.683847] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.683849] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.683850] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
>[    0.683852] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
>[    0.683853] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
>[    0.683861] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
>[    0.683893] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
>[    0.683920] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.683962] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
>[    0.683986] pci 0000:00:16.0: reg 10: [mem 0xd4524000-0xd452400f 64bit]
>[    0.684061] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.684084] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
>[    0.684101] pci 0000:00:16.3: reg 10: [io  0x5050-0x5057]
>[    0.684111] pci 0000:00:16.3: reg 14: [mem 0xd452b000-0xd452bfff]
>[    0.684206] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>[    0.684224] pci 0000:00:19.0: reg 10: [mem 0xd4500000-0xd451ffff]
>[    0.684232] pci 0000:00:19.0: reg 14: [mem 0xd452a000-0xd452afff]
>[    0.684241] pci 0000:00:19.0: reg 18: [io  0x5020-0x503f]
>[    0.684302] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.684326] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>[    0.684346] pci 0000:00:1a.0: reg 10: [mem 0xd4529000-0xd45293ff]
>[    0.684433] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.684461] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
>[    0.684476] pci 0000:00:1b.0: reg 10: [mem 0xd4520000-0xd4523fff 64bit]
>[    0.684542] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.684565] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>[    0.684641] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.684666] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
>[    0.684746] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.684771] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
>[    0.684847] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.684871] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
>[    0.684948] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.684975] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
>[    0.685051] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
>[    0.685079] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>[    0.685100] pci 0000:00:1d.0: reg 10: [mem 0xd4528000-0xd45283ff]
>[    0.685188] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.685214] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
>[    0.685337] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
>[    0.685355] pci 0000:00:1f.2: reg 10: [io  0x5048-0x504f]
>[    0.685363] pci 0000:00:1f.2: reg 14: [io  0x505c-0x505f]
>[    0.685371] pci 0000:00:1f.2: reg 18: [io  0x5040-0x5047]
>[    0.685379] pci 0000:00:1f.2: reg 1c: [io  0x5058-0x505b]
>[    0.685387] pci 0000:00:1f.2: reg 20: [io  0x5000-0x501f]
>[    0.685394] pci 0000:00:1f.2: reg 24: [mem 0xd4527000-0xd45277ff]
>[    0.685437] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.685472] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-3e]
>[    0.685484] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
>[    0.685499] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.685510] pci 0000:01:00.0: reg 18: [mem 0xd4400000-0xd441ffff 64bit]
>[    0.685517] pci 0000:01:00.0: reg 20: [io  0x4000-0x40ff]
>[    0.685532] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
>[    0.685565] pci 0000:01:00.0: supports D1 D2
>[    0.685586] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
>[    0.685600] pci 0000:01:00.1: reg 10: [mem 0xd4420000-0xd4423fff 64bit]
>[    0.685661] pci 0000:01:00.1: supports D1 D2
>[    0.686765] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.686773] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
>[    0.686780] pci 0000:00:01.0:   bridge window [mem 0xd4400000-0xd44fffff]
>[    0.686789] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.686876] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-3e]
>[    0.686879] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.686885] pci 0000:00:1c.0:   bridge window [mem 0xd4300000-0xd43fffff]
>[    0.686931] pci_bus 0000:03: busn_res: [bus 03-23] is inserted under [bus 00-3e]
>[    0.686935] pci 0000:00:1c.1: PCI bridge to [bus 03-23]
>[    0.686939] pci 0000:00:1c.1:   bridge window [io  0x2000-0x3fff]
>[    0.686943] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd3ffffff]
>[    0.686989] pci_bus 0000:24: busn_res: [bus 24] is inserted under [bus 00-3e]
>[    0.687019] pci 0000:24:00.0: [197b:2380] type 00 class 0x0c0010
>[    0.687050] pci 0000:24:00.0: reg 10: [mem 0xd4200000-0xd42007ff]
>[    0.687071] pci 0000:24:00.0: reg 14: [mem 0xd4205000-0xd42050ff]
>[    0.687314] pci 0000:24:00.1: [197b:2392] type 00 class 0x088000
>[    0.687340] pci 0000:24:00.1: reg 10: [mem 0xd4204000-0xd42040ff]
>[    0.687445] pci 0000:24:00.1: reg 30: [mem 0xffff8000-0xffffffff pref]
>[    0.687580] pci 0000:24:00.2: [197b:2391] type 00 class 0x080501
>[    0.687605] pci 0000:24:00.2: reg 10: [mem 0xd4203000-0xd42030ff]
>[    0.689790] pci 0000:00:1c.2: PCI bridge to [bus 24]
>[    0.689805] pci 0000:00:1c.2:   bridge window [mem 0xd4200000-0xd42fffff]
>[    0.689882] pci_bus 0000:25: busn_res: [bus 25] is inserted under [bus 00-3e]
>[    0.690007] pci 0000:25:00.0: [8086:0085] type 00 class 0x028000
>[    0.690106] pci 0000:25:00.0: reg 10: [mem 0xd4100000-0xd4101fff 64bit]
>[    0.690545] pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
>[    0.691841] pci 0000:00:1c.3: PCI bridge to [bus 25]
>[    0.691857] pci 0000:00:1c.3:   bridge window [mem 0xd4100000-0xd41fffff]
>[    0.691903] pci_bus 0000:26: busn_res: [bus 26] is inserted under [bus 00-3e]
>[    0.691942] pci 0000:26:00.0: [1033:0194] type 00 class 0x0c0330
>[    0.691970] pci 0000:26:00.0: reg 10: [mem 0xd4000000-0xd4001fff 64bit]
>[    0.692116] pci 0000:26:00.0: PME# supported from D0 D3hot D3cold
>[    0.693761] pci 0000:00:1c.7: PCI bridge to [bus 26]
>[    0.693774] pci 0000:00:1c.7:   bridge window [mem 0xd4000000-0xd40fffff]
>[    0.693848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.693962] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>[    0.694011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>[    0.694035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>[    0.694077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>[    0.694112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>[    0.694139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
>[    0.694472]  pci0000:00: Requesting ACPI _OSC control (0x1d)
>[    0.695386]  pci0000:00: ACPI _OSC control (0x1d) granted
>[    0.699746] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.699780] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>[    0.699813] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.699846] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>[    0.699878] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.699911] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.699943] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>[    0.699975] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.700055] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.700057] vgaarb: loaded
>[    0.700058] vgaarb: bridge control possible 0000:01:00.0
>[    0.700113] SCSI subsystem initialized
>[    0.700115] ACPI: bus type scsi registered
>[    0.700147] libata version 3.00 loaded.
>[    0.700164] ACPI: bus type usb registered
>[    0.700176] usbcore: registered new interface driver usbfs
>[    0.700182] usbcore: registered new interface driver hub
>[    0.700199] usbcore: registered new device driver usb
>[    0.700241] PCI: Using ACPI for IRQ routing
>[    0.706565] PCI: pci_cache_line_size set to 64 bytes
>[    0.706656] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
>[    0.706658] e820: reserve RAM buffer [mem 0xbeebe000-0xbfffffff]
>[    0.706659] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
>[    0.706660] e820: reserve RAM buffer [mem 0x23e000000-0x23fffffff]
>[    0.706732] NetLabel: Initializing
>[    0.706734] NetLabel:  domain hash size = 128
>[    0.706734] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.706742] NetLabel:  unlabeled traffic allowed by default
>[    0.706788] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.706792] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.708805] Switching to clocksource hpet
>[    0.713696] pnp: PnP ACPI init
>[    0.713709] ACPI: bus type pnp registered
>[    0.713977] pnp 00:00: [bus 00-3e]
>[    0.713980] pnp 00:00: [io  0x0000-0x0cf7 window]
>[    0.713981] pnp 00:00: [io  0x0cf8-0x0cff]
>[    0.713983] pnp 00:00: [io  0x0d00-0xffff window]
>[    0.713985] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>[    0.713986] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>[    0.713988] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>[    0.713989] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>[    0.713991] pnp 00:00: [mem 0x000cc000-0x000cffff window]
>[    0.713992] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>[    0.713994] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>[    0.713995] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>[    0.713996] pnp 00:00: [mem 0x000dc000-0x000dffff window]
>[    0.713998] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>[    0.713999] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>[    0.714001] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>[    0.714002] pnp 00:00: [mem 0x000ec000-0x000effff window]
>[    0.714004] pnp 00:00: [mem 0x000f0000-0x000fffff window]
>[    0.714005] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
>[    0.714007] pnp 00:00: [mem 0xf0000000-0xfedfffff window]
>[    0.714008] pnp 00:00: [mem 0xfee01000-0xffffffff window]
>[    0.714074] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>[    0.714144] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
>[    0.714146] pnp 00:01: [mem 0xfed10000-0xfed17fff]
>[    0.714147] pnp 00:01: [mem 0xfed18000-0xfed18fff]
>[    0.714149] pnp 00:01: [mem 0x00000000-0x00000fff]
>[    0.714150] pnp 00:01: [mem 0xd4600000-0xd4600fff]
>[    0.714151] pnp 00:01: [mem 0xe0000000-0xefffffff]
>[    0.714153] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
>[    0.714154] pnp 00:01: [mem 0xfed90000-0xfed93fff]
>[    0.714155] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
>[    0.714157] pnp 00:01: [mem 0xfec00000-0xfec00fff]
>[    0.714192] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.714194] system 00:01: [mem 0xfed10000-0xfed17fff] could not be reserved
>[    0.714196] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.714197] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
>[    0.714199] system 00:01: [mem 0xd4600000-0xd4600fff] has been reserved
>[    0.714201] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.714202] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.714204] system 00:01: [mem 0xfed90000-0xfed93fff] could not be reserved
>[    0.714206] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.714207] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.714210] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.714271] pnp 00:02: [io  0x0000-0x001f]
>[    0.714273] pnp 00:02: [io  0x0081-0x0091]
>[    0.714274] pnp 00:02: [io  0x0093-0x009f]
>[    0.714275] pnp 00:02: [io  0x00c0-0x00df]
>[    0.714277] pnp 00:02: [dma 4]
>[    0.714299] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.714305] pnp 00:03: [mem 0xff000000-0xffffffff]
>[    0.714324] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.714362] pnp 00:04: [io  0xfe00-0xfe0f]
>[    0.714364] pnp 00:04: [io  0xfe80-0xfe8f]
>[    0.714365] pnp 00:04: [mem 0xfed40000-0xfed44fff]
>[    0.714388] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
>[    0.714452] pnp 00:05: [mem 0xfed00000-0xfed003ff]
>[    0.714473] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.714481] pnp 00:06: [io  0x00f0]
>[    0.714494] pnp 00:06: [irq 13]
>[    0.714517] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.714525] pnp 00:07: [io  0x002e-0x002f]
>[    0.714526] pnp 00:07: [io  0x004e-0x004f]
>[    0.714527] pnp 00:07: [io  0x0061]
>[    0.714529] pnp 00:07: [io  0x0063]
>[    0.714530] pnp 00:07: [io  0x0065]
>[    0.714531] pnp 00:07: [io  0x0067]
>[    0.714532] pnp 00:07: [io  0x0070]
>[    0.714533] pnp 00:07: [io  0x0080]
>[    0.714535] pnp 00:07: [io  0x0092]
>[    0.714536] pnp 00:07: [io  0x00b2-0x00b3]
>[    0.714537] pnp 00:07: [io  0x0200-0x027f]
>[    0.714539] pnp 00:07: [io  0x1000-0x100f]
>[    0.714540] pnp 00:07: [io  0xffff]
>[    0.714541] pnp 00:07: [io  0xffff]
>[    0.714542] pnp 00:07: [io  0x0400-0x047f]
>[    0.714544] pnp 00:07: [io  0x0500-0x057f]
>[    0.714545] pnp 00:07: [io  0xef80-0xef9f]
>[    0.714579] system 00:07: [io  0x0200-0x027f] has been reserved
>[    0.714581] system 00:07: [io  0x1000-0x100f] has been reserved
>[    0.714582] system 00:07: [io  0xffff] has been reserved
>[    0.714584] system 00:07: [io  0xffff] has been reserved
>[    0.714585] system 00:07: [io  0x0400-0x047f] has been reserved
>[    0.714587] system 00:07: [io  0x0500-0x057f] has been reserved
>[    0.714589] system 00:07: [io  0xef80-0xef9f] has been reserved
>[    0.714591] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.714596] pnp 00:08: [io  0x0070-0x0077]
>[    0.714602] pnp 00:08: [irq 8]
>[    0.714625] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.714925] pnp 00:09: [io  0x03f8-0x03ff]
>[    0.714932] pnp 00:09: [irq 4]
>[    0.714977] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
>[    0.715236] pnp 00:0a: [io  0x0378-0x037f]
>[    0.715238] pnp 00:0a: [io  0x0778-0x077a]
>[    0.715244] pnp 00:0a: [irq 5]
>[    0.715245] pnp 00:0a: [dma 0 disabled]
>[    0.715316] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
>[    0.715322] pnp 00:0b: [io  0x0060]
>[    0.715324] pnp 00:0b: [io  0x0064]
>[    0.715329] pnp 00:0b: [irq 1]
>[    0.715353] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.715363] pnp 00:0c: [irq 12]
>[    0.715386] pnp 00:0c: Plug and Play ACPI device, IDs SYN017b SYN0100 SYN0002 PNP0f13 (active)
>[    0.715561] pnp 00:0d: [irq 23]
>[    0.715592] pnp 00:0d: Plug and Play ACPI device, IDs HPQ0004 (active)
>[    0.715764] pnp: PnP ACPI: found 14 devices
>[    0.715765] ACPI: ACPI bus type pnp unregistered
>[    0.721953] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
>[    0.721956] pci 0000:24:00.1: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
>[    0.721979] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-23] add_size 200000
>[    0.722005] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.722009] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4700000-0xd48fffff 64bit pref]
>[    0.722012] pci 0000:00:1c.2: BAR 15: assigned [mem 0xd4900000-0xd49fffff pref]
>[    0.722014] pci 0000:01:00.0: BAR 6: assigned [mem 0xd4440000-0xd445ffff pref]
>[    0.722016] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.722018] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
>[    0.722021] pci 0000:00:01.0:   bridge window [mem 0xd4400000-0xd44fffff]
>[    0.722023] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.722026] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.722031] pci 0000:00:1c.0:   bridge window [mem 0xd4300000-0xd43fffff]
>[    0.722039] pci 0000:00:1c.1: PCI bridge to [bus 03-23]
>[    0.722042] pci 0000:00:1c.1:   bridge window [io  0x2000-0x3fff]
>[    0.722047] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd3ffffff]
>[    0.722051] pci 0000:00:1c.1:   bridge window [mem 0xd4700000-0xd48fffff 64bit pref]
>[    0.722057] pci 0000:24:00.1: BAR 6: assigned [mem 0xd4900000-0xd4907fff pref]
>[    0.722059] pci 0000:00:1c.2: PCI bridge to [bus 24]
>[    0.722064] pci 0000:00:1c.2:   bridge window [mem 0xd4200000-0xd42fffff]
>[    0.722068] pci 0000:00:1c.2:   bridge window [mem 0xd4900000-0xd49fffff pref]
>[    0.722074] pci 0000:00:1c.3: PCI bridge to [bus 25]
>[    0.722079] pci 0000:00:1c.3:   bridge window [mem 0xd4100000-0xd41fffff]
>[    0.722087] pci 0000:00:1c.7: PCI bridge to [bus 26]
>[    0.722092] pci 0000:00:1c.7:   bridge window [mem 0xd4000000-0xd40fffff]
>[    0.722138] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.722140] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.722142] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.722143] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
>[    0.722144] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
>[    0.722146] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
>[    0.722148] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
>[    0.722149] pci_bus 0000:01: resource 1 [mem 0xd4400000-0xd44fffff]
>[    0.722150] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.722152] pci_bus 0000:02: resource 1 [mem 0xd4300000-0xd43fffff]
>[    0.722154] pci_bus 0000:03: resource 0 [io  0x2000-0x3fff]
>[    0.722155] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd3ffffff]
>[    0.722157] pci_bus 0000:03: resource 2 [mem 0xd4700000-0xd48fffff 64bit pref]
>[    0.722158] pci_bus 0000:24: resource 1 [mem 0xd4200000-0xd42fffff]
>[    0.722160] pci_bus 0000:24: resource 2 [mem 0xd4900000-0xd49fffff pref]
>[    0.722161] pci_bus 0000:25: resource 1 [mem 0xd4100000-0xd41fffff]
>[    0.722163] pci_bus 0000:26: resource 1 [mem 0xd4000000-0xd40fffff]
>[    0.722192] NET: Registered protocol family 2
>[    0.722823] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>[    0.723940] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.724058] TCP: Hash tables configured (established 524288 bind 65536)
>[    0.724071] TCP: reno registered
>[    0.724083] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.724115] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.724197] NET: Registered protocol family 1
>[    0.724505] pci 0000:01:00.0: Boot video device
>[    0.724560] PCI: CLS 64 bytes, default 64
>[    0.724599] Unpacking initramfs...
>[    1.016228] Freeing initrd memory: 18132k freed
>[    1.018370] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    1.018374] software IO TLB [mem 0xbaeb8000-0xbeeb7fff] (64MB) mapped at [ffff8800baeb8000-ffff8800beeb7fff]
>[    1.020579] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
>[    1.020800] audit: initializing netlink socket (disabled)
>[    1.020809] type=2000 audit(1355861228.900:1): initialized
>[    1.037982] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.039374] VFS: Disk quotas dquot_6.5.2
>[    1.039408] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.039719] msgmni has been set to 15865
>[    1.039767] SELinux:  Registering netfilter hooks
>[    1.040195] alg: No test for stdrng (krng)
>[    1.040201] NET: Registered protocol family 38
>[    1.040229] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    1.040249] io scheduler noop registered
>[    1.040251] io scheduler deadline registered
>[    1.040273] io scheduler cfq registered (default)
>[    1.040384] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
>[    1.040468] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
>[    1.040567] pcieport 0000:00:1c.1: irq 43 for MSI/MSI-X
>[    1.040670] pcieport 0000:00:1c.2: irq 44 for MSI/MSI-X
>[    1.040769] pcieport 0000:00:1c.3: irq 45 for MSI/MSI-X
>[    1.040865] pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X
>[    1.040943] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
>[    1.040945] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
>[    1.040946] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
>[    1.040948] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
>[    1.040962] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
>[    1.040967] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
>[    1.040981] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
>[    1.040985] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
>[    1.040998] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
>[    1.041000] pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
>[    1.041001] pci 0000:24:00.1: Signaling PME through PCIe PME interrupt
>[    1.041003] pci 0000:24:00.2: Signaling PME through PCIe PME interrupt
>[    1.041007] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
>[    1.041020] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
>[    1.041022] pci 0000:25:00.0: Signaling PME through PCIe PME interrupt
>[    1.041026] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
>[    1.041040] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
>[    1.041041] pci 0000:26:00.0: Signaling PME through PCIe PME interrupt
>[    1.041045] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
>[    1.041057] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.041100] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 1c12 ss_vid 103c ss_did 161c
>[    1.041115] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
>[    1.041118] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    1.041119] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    1.041469] intel_idle: MWAIT substates: 0x21120
>[    1.041471] intel_idle: v0.4 model 0x2A
>[    1.041471] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    1.041622] ACPI: AC Adapter [AC] (on-line)
>[    1.041768] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
>[    1.041771] ACPI: Sleep Button [SLPB]
>[    1.041798] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>[    1.041817] ACPI: Lid Switch [LID]
>[    1.041842] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    1.041844] ACPI: Power Button [PWRF]
>[    1.041998] ACPI: Requesting acpi_cpufreq
>[    1.065347] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.065349] ACPI: Thermal Zone [CPUZ] (73 C)
>[    1.084240] thermal LNXTHERM:01: registered as thermal_zone1
>[    1.084241] ACPI: Thermal Zone [GFXZ] (61 C)
>[    1.094135] thermal LNXTHERM:02: registered as thermal_zone2
>[    1.094136] ACPI: Thermal Zone [EXTZ] (54 C)
>[    1.104061] thermal LNXTHERM:03: registered as thermal_zone3
>[    1.104062] ACPI: Thermal Zone [LOCZ] (56 C)
>[    1.114007] thermal LNXTHERM:04: registered as thermal_zone4
>[    1.114009] ACPI: Thermal Zone [BATZ] (35 C)
>[    1.114186] thermal LNXTHERM:05: registered as thermal_zone5
>[    1.114188] ACPI: Thermal Zone [PCHZ] (0 C)
>[    1.114245] thermal LNXTHERM:06: registered as thermal_zone6
>[    1.114246] ACPI: Thermal Zone [DM1Z] (0 C)
>[    1.114299] thermal LNXTHERM:07: registered as thermal_zone7
>[    1.114300] ACPI: Thermal Zone [DM2Z] (0 C)
>[    1.114318] GHES: HEST is not enabled!
>[    1.114386] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.135163] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.156136] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.162184] ACPI: Battery Slot [BAT0] (battery present)
>[    1.162221] ACPI: Battery Slot [BAT1] (battery absent)
>[    1.176575] 0000:00:16.3: ttyS1 at I/O 0x5050 (irq = 17) is a 16550A
>[    1.176815] Non-volatile memory driver v1.3
>[    1.176817] Linux agpgart interface v0.103
>[    1.177410] loop: module loaded
>[    1.177451] ahci 0000:00:1f.2: version 3.0
>[    1.177498] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
>[    1.177524] ahci: SSS flag set, parallel bus scan disabled
>[    1.188066] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
>[    1.188074] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
>[    1.188085] ahci 0000:00:1f.2: setting latency timer to 64
>[    1.196378] scsi0 : ahci
>[    1.196435] scsi1 : ahci
>[    1.196481] scsi2 : ahci
>[    1.196525] scsi3 : ahci
>[    1.196570] scsi4 : ahci
>[    1.196619] scsi5 : ahci
>[    1.196648] ata1: SATA max UDMA/133 abar m2048@0xd4527000 port 0xd4527100 irq 47
>[    1.196650] ata2: SATA max UDMA/133 abar m2048@0xd4527000 port 0xd4527180 irq 47
>[    1.196651] ata3: DUMMY
>[    1.196654] ata4: SATA max UDMA/133 abar m2048@0xd4527000 port 0xd4527280 irq 47
>[    1.196656] ata5: SATA max UDMA/133 abar m2048@0xd4527000 port 0xd4527300 irq 47
>[    1.196659] ata6: SATA max UDMA/133 abar m2048@0xd4527000 port 0xd4527380 irq 47
>[    1.196713] libphy: Fixed MDIO Bus: probed
>[    1.196758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.196783] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[    1.196786] ehci_hcd 0000:00:1a.0: EHCI Host Controller
>[    1.196821] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    1.200710] ehci_hcd 0000:00:1a.0: debug port 2
>[    1.200717] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>[    1.200733] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4529000
>[    1.205996] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    1.206051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.206056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.206061] usb usb1: Product: EHCI Host Controller
>[    1.206065] usb usb1: Manufacturer: Linux 3.6.10-2.fc17.x86_64 ehci_hcd
>[    1.206069] usb usb1: SerialNumber: 0000:00:1a.0
>[    1.206177] hub 1-0:1.0: USB hub found
>[    1.206181] hub 1-0:1.0: 3 ports detected
>[    1.206238] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[    1.206241] ehci_hcd 0000:00:1d.0: EHCI Host Controller
>[    1.206279] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.210183] ehci_hcd 0000:00:1d.0: debug port 2
>[    1.210189] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>[    1.210198] ehci_hcd 0000:00:1d.0: irq 16, io mem 0xd4528000
>[    1.216166] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    1.216187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.216188] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.216190] usb usb2: Product: EHCI Host Controller
>[    1.216191] usb usb2: Manufacturer: Linux 3.6.10-2.fc17.x86_64 ehci_hcd
>[    1.216192] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.216270] hub 2-0:1.0: USB hub found
>[    1.216272] hub 2-0:1.0: 3 ports detected
>[    1.216315] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.216321] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.216357] xhci_hcd 0000:26:00.0: xHCI Host Controller
>[    1.216390] xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 3
>[    1.216569] xhci_hcd 0000:26:00.0: irq 19, io mem 0xd4000000
>[    1.216635] xhci_hcd 0000:26:00.0: irq 48 for MSI/MSI-X
>[    1.216641] xhci_hcd 0000:26:00.0: irq 49 for MSI/MSI-X
>[    1.216646] xhci_hcd 0000:26:00.0: irq 50 for MSI/MSI-X
>[    1.216651] xhci_hcd 0000:26:00.0: irq 51 for MSI/MSI-X
>[    1.216656] xhci_hcd 0000:26:00.0: irq 52 for MSI/MSI-X
>[    1.216768] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.216770] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.216771] usb usb3: Product: xHCI Host Controller
>[    1.216772] usb usb3: Manufacturer: Linux 3.6.10-2.fc17.x86_64 xhci_hcd
>[    1.216774] usb usb3: SerialNumber: 0000:26:00.0
>[    1.216823] xHCI xhci_add_endpoint called for root hub
>[    1.216825] xHCI xhci_check_bandwidth called for root hub
>[    1.216841] hub 3-0:1.0: USB hub found
>[    1.216848] hub 3-0:1.0: 2 ports detected
>[    1.216888] xhci_hcd 0000:26:00.0: xHCI Host Controller
>[    1.216916] xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 4
>[    1.219987] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.219989] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.219990] usb usb4: Product: xHCI Host Controller
>[    1.219992] usb usb4: Manufacturer: Linux 3.6.10-2.fc17.x86_64 xhci_hcd
>[    1.219993] usb usb4: SerialNumber: 0000:26:00.0
>[    1.220048] xHCI xhci_add_endpoint called for root hub
>[    1.220050] xHCI xhci_check_bandwidth called for root hub
>[    1.220065] hub 4-0:1.0: USB hub found
>[    1.220071] hub 4-0:1.0: 2 ports detected
>[    1.230010] usbcore: registered new interface driver usbserial
>[    1.230030] usbcore: registered new interface driver usbserial_generic
>[    1.230051] USB Serial support registered for generic
>[    1.230052] usbserial: USB Serial Driver core
>[    1.230079] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.231894] i8042: Detected active multiplexing controller, rev 1.1
>[    1.232661] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.232665] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    1.232684] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    1.232696] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    1.232709] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    1.232765] mousedev: PS/2 mouse device common for all mice
>[    1.232891] rtc_cmos 00:08: RTC can wake from S4
>[    1.233019] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>[    1.233046] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.233103] device-mapper: uevent: version 1.0.3
>[    1.233151] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
>[    1.233250] cpuidle: using governor ladder
>[    1.233323] cpuidle: using governor menu
>[    1.233491] EFI Variables Facility v0.08 2004-May-17
>[    1.233555] usbcore: registered new interface driver usbhid
>[    1.233556] usbhid: USB HID core driver
>[    1.233576] drop_monitor: Initializing network drop monitor service
>[    1.233641] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.233669] TCP: cubic registered
>[    1.233671] Initializing XFRM netlink socket
>[    1.233753] NET: Registered protocol family 10
>[    1.233875] mip6: Mobile IPv6
>[    1.233876] NET: Registered protocol family 17
>[    1.234222] PM: Hibernation image not present or could not be loaded.
>[    1.234229] registered taskstats version 1
>[    1.234852]   Magic number: 8:576:144
>[    1.234866] ata_port ata1: hash matches
>[    1.234867]  ata1: hash matches
>[    1.234898] acpi device:15: hash matches
>[    1.234951] rtc_cmos 00:08: setting system clock to 2012-12-18 20:07:09 UTC (1355861229)
>[    1.254118] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    1.500581] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.501958] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    1.502128] ata1.00: ATA-8: TOSHIBA MK5061GSYN, MH000C, max UDMA/100
>[    1.502136] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.503701] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    1.503874] ata1.00: configured for UDMA/100
>[    1.504328] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK5061GS MH00 PQ: 0 ANSI: 5
>[    1.504825] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.504832] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>[    1.504906] sd 0:0:0:0: [sda] Write Protect is off
>[    1.504909] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.504922] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.507489] usb 1-1: new high-speed USB device number 2 using ehci_hcd
>[    1.566701]  sda: sda1 sda2 sda4
>[    1.567402] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.622094] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.622105] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.622901] hub 1-1:1.0: USB hub found
>[    1.623000] hub 1-1:1.0: 6 ports detected
>[    1.726134] usb 2-1: new high-speed USB device number 2 using ehci_hcd
>[    1.809002] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.814406] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    1.814423] ata2.00: ATAPI: hp      DVDRAM GT31L, MR52, max UDMA/100
>[    1.820392] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    1.820412] ata2.00: configured for UDMA/100
>[    1.823760] scsi 1:0:0:0: CD-ROM            hp       DVDRAM GT31L     MR52 PQ: 0 ANSI: 5
>[    1.827968] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.827978] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.828398] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    1.828622] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    1.505112] ACPI: Invalid Power Resource to register!
>[    1.828979] ACPI: Invalid Power Resource to register!<6>[    1.840476] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.840486] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.841234] hub 2-1:1.0: USB hub found
>[    1.841396] hub 2-1:1.0: 8 ports detected
>[    1.916025] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
>[    1.976672] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
>[    2.002522] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c
>[    2.002537] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
>[    2.002545] usb 1-1.1: SerialNumber: 00a0b64da388
>[    2.017555] tsc: Refined TSC clocksource calibration: 2594.106 MHz
>[    2.017567] Switching to clocksource tsc
>[    2.076587] usb 1-1.4: new high-speed USB device number 4 using ehci_hcd
>[    2.133381] ata4: SATA link down (SStatus 0 SControl 300)
>[    2.162070] usb 1-1.4: New USB device found, idVendor=0424, idProduct=2514
>[    2.162080] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.162899] hub 1-1.4:1.0: USB hub found
>[    2.162991] hub 1-1.4:1.0: 4 ports detected
>[    2.237450] usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
>[    2.372158] usb 2-1.4: New USB device found, idVendor=0461, idProduct=4dce
>[    2.372168] usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>[    2.372174] usb 2-1.4: Product: HP HD Webcam [Fixed]
>[    2.372178] usb 2-1.4: Manufacturer: Primax Electronics Ltd.
>[    2.372183] usb 2-1.4: SerialNumber: PMX02
>[    2.437807] ata5: SATA link down (SStatus 0 SControl 300)
>[    2.451050] usb 1-1.4.2: new full-speed USB device number 5 using ehci_hcd
>[    2.536361] usb 1-1.4.2: New USB device found, idVendor=0557, idProduct=7000
>[    2.536371] usb 1-1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.536921] hub 1-1.4.2:1.0: USB hub found
>[    2.537078] hub 1-1.4.2:1.0: 4 ports detected
>[    2.742230] ata6: SATA link down (SStatus 0 SControl 300)
>[    2.746410] Freeing unused kernel memory: 1032k freed
>[    2.746739] Write protecting the kernel read-only data: 12288k
>[    2.759898] Freeing unused kernel memory: 1864k freed
>[    2.770503] Freeing unused kernel memory: 1416k freed
>[    2.800166] usb 1-1.4.2.1: new low-speed USB device number 6 using ehci_hcd
>[    2.858043] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400, board id: 1623, fw id: 790122
>[    2.869608] dracut: dracut-018-105.git20120927.fc17
>[    2.904659] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
>[    2.909834] usb 1-1.4.2.1: New USB device found, idVendor=1c4f, idProduct=0002
>[    2.909846] usb 1-1.4.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.909854] usb 1-1.4.2.1: Product: USB Keykoard
>[    2.909861] usb 1-1.4.2.1: Manufacturer: USB
>[    2.924936] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.1/1-1.4.2.1:1.0/input/input6
>[    2.925331] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.4.2.1/input0
>[    2.931047] dracut: rd.luks=0: removing cryptoluks activation
>[    2.937592] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.1/1-1.4.2.1:1.1/input/input7
>[    2.937840] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.4.2.1/input1
>[    2.976785] udevd[154]: starting version 182
>[    3.000791] usb 1-1.4.2.4: new low-speed USB device number 7 using ehci_hcd
>[    3.024917] [drm] Initialized drm 1.1.0 20060810
>[    3.028954] [drm] radeon defaulting to kernel modesetting.
>[    3.028957] [drm] radeon kernel modesetting enabled.
>[    3.030681] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x161E).
>[    3.030716] [drm] register mmio base: 0xD4400000
>[    3.030717] [drm] register mmio size: 131072
>[    3.031114] ATOM BIOS: HP
>[    3.031475] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
>[    3.031477] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
>[    3.033484] [drm] Detected VRAM RAM=1024M, BAR=256M
>[    3.033488] [drm] RAM width 64bits DDR
>[    3.033876] [TTM] Zone  kernel: Available graphics memory: 4063850 kiB
>[    3.033878] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[    3.033879] [TTM] Initializing pool allocator
>[    3.033883] [TTM] Initializing DMA pool allocator
>[    3.033904] [drm] radeon: 1024M of VRAM memory ready
>[    3.033906] [drm] radeon: 512M of GTT memory ready.
>[    3.033926] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    3.033927] [drm] Driver supports precise vblank timestamp query.
>[    3.033971] radeon 0000:01:00.0: irq 53 for MSI/MSI-X
>[    3.033981] radeon 0000:01:00.0: radeon: using MSI.
>[    3.034011] [drm] radeon: irq initialized.
>[    3.034016] [drm] GART: num cpu pages 131072, num gpu pages 131072
>[    3.034370] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[    3.034372] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[    3.034451] [drm] Loading CAICOS Microcode
>[    3.081637] usb 1-1.4.2.4: New USB device found, idVendor=046d, idProduct=c046
>[    3.081641] usb 1-1.4.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.081644] usb 1-1.4.2.4: Product: USB Optical Mouse
>[    3.081646] usb 1-1.4.2.4: Manufacturer: Logitech
>[    3.085309] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.4/1-1.4.2.4:1.0/input/input8
>[    3.085458] hid-generic 0003:046D:C046.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.4.2.4/input0
>[    3.780702] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[    3.780940] radeon 0000:01:00.0: WB enabled
>[    3.780949] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022d078c00
>[    3.798217] [drm] ring test on 0 succeeded in 2 usecs
>[    3.798851] [drm] ib test on ring 0 succeeded in 0 usecs
>[    3.800777] [drm] Radeon Display Connectors
>[    3.800781] [drm] Connector 0:
>[    3.800784] [drm]   LVDS-1
>[    3.800789] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
>[    3.800791] [drm]   Encoders:
>[    3.800794] [drm]     LCD1: INTERNAL_UNIPHY
>[    3.800797] [drm] Connector 1:
>[    3.800800] [drm]   DP-1
>[    3.800802] [drm]   HPD1
>[    3.800806] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[    3.800808] [drm]   Encoders:
>[    3.800811] [drm]     DFP1: INTERNAL_UNIPHY1
>[    3.800813] [drm] Connector 2:
>[    3.800816] [drm]   DP-2
>[    3.800818] [drm]   HPD2
>[    3.800822] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
>[    3.800824] [drm]   Encoders:
>[    3.800826] [drm]     DFP2: INTERNAL_UNIPHY1
>[    3.800829] [drm] Connector 3:
>[    3.800831] [drm]   DP-3
>[    3.800834] [drm]   HPD3
>[    3.800837] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
>[    3.800840] [drm]   Encoders:
>[    3.800842] [drm]     DFP3: INTERNAL_UNIPHY2
>[    3.800844] [drm] Connector 4:
>[    3.800847] [drm]   VGA-1
>[    3.800851] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
>[    3.800862] [drm]   Encoders:
>[    3.800863] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[    3.800992] [drm] Internal thermal controller with fan control
>[    3.802136] [drm] radeon: power management initialized
>[    3.917404] [drm] fb mappable at 0xC0142000
>[    3.917411] [drm] vram apper at 0xC0000000
>[    3.917414] [drm] size 8294400
>[    3.917417] [drm] fb depth is 24
>[    3.917420] [drm]    pitch is 7680
>[    3.917595] fbcon: radeondrmfb (fb0) is primary device
>[    4.196139] Console: switching to colour frame buffer device 200x56
>[    4.205379] fb0: radeondrmfb frame buffer device
>[    4.205382] drm: registered panic notifier
>[    4.205427] [drm] Initialized radeon 2.24.0 20080528 for 0000:01:00.0 on minor 0
>[    4.209782] dracut: Starting plymouth daemon
>[    4.400652] dracut: rd.dm=0: removing DM RAID activation
>[    4.424041] dracut: rd.md=0: removing MD RAID activation
>[    4.496681] acpi device:02: registered as cooling_device4
>[    4.497270] ACPI: Video Device [DGFX] (multi-head: yes  rom: no  post: no)
>[    4.497322] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input9
>[    4.503675] wmi: Mapper loaded
>[    4.507908] sdhci: Secure Digital Host Controller Interface driver
>[    4.507910] sdhci: Copyright(c) Pierre Ossman
>[    4.508122] sdhci-pci 0000:24:00.1: SDHCI controller found [197b:2392] (rev 30)
>[    4.508220] Registered led device: mmc0::
>[    4.530727] mmc0: SDHCI controller on PCI [0000:24:00.1] using DMA
>[    4.530753] sdhci-pci 0000:24:00.2: SDHCI controller found [197b:2391] (rev 30)
>[    4.530778] sdhci-pci 0000:24:00.2: Refusing to bind to secondary interface.
>[    4.583840] firewire_ohci 0000:24:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
>[    4.868549] dracut: Scanning devices sda2  for LVM logical volumes vg_mozart/root vg_mozart/swap
>[    4.883852] dracut: inactive '/dev/vg_mozart/swap' [7.81 GiB] inherit
>[    4.884183] dracut: inactive '/dev/vg_mozart/root' [39.06 GiB] inherit
>[    4.884448] dracut: inactive '/dev/vg_mozart/home' [48.84 GiB] inherit
>[    4.884701] dracut: inactive '/dev/vg_mozart/data' [200.00 GiB] inherit
>[    4.884957] dracut: inactive '/dev/vg_mozart/lv_centOS' [10.00 GiB] inherit
>[    4.885255] dracut: inactive '/dev/vg_mozart/evergreen1' [10.00 GiB] inherit
>[    4.885506] dracut: inactive '/dev/vg_mozart/WinXP' [20.00 GiB] inherit
>[    5.083947] firewire_core 0000:24:00.0: created device fw0: GUID ffe473fffffffffe, S400
>[    5.278873] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    5.413775] dracut: Checking ext4: /dev/mapper/vg_mozart-root
>[    5.414238] dracut: issuing e2fsck -a  /dev/mapper/vg_mozart-root
>[    5.468160] dracut: /dev/mapper/vg_mozart-root: clean, 605760/2564096 files, 6425086/10240000 blocks
>[    5.469257] dracut: Remounting /dev/mapper/vg_mozart-root with -o ro
>[    5.536653] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    5.585276] dracut: Mounted root filesystem /dev/mapper/vg_mozart-root
>[    5.790196] dracut: Switching root
>[    6.516793] SELinux: 2048 avtab hash slots, 103464 rules.
>[    6.529969] SELinux: 2048 avtab hash slots, 103464 rules.
>[    6.657320] SELinux:  9 users, 15 roles, 4213 types, 231 bools, 1 sens, 1024 cats
>[    6.657323] SELinux:  83 classes, 103464 rules
>[    6.660283] SELinux:  Permission wake_alarm in class capability2 not defined in policy.
>[    6.660285] SELinux:  Permission block_suspend in class capability2 not defined in policy.
>[    6.660287] SELinux: the above unknown classes and permissions will be allowed
>[    6.660292] SELinux:  Completing initialization.
>[    6.660293] SELinux:  Setting up existing superblocks.
>[    6.660297] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    6.660300] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>[    6.660307] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>[    6.660310] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[    6.660314] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.660333] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>[    6.660650] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>[    6.660653] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>[    6.661040] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>[    6.661045] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>[    6.661047] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>[    6.661057] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    6.661063] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[    6.661067] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>[    6.661074] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    6.661334] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.661338] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.661357] SELinux: initialized (dev dm-1, type ext4), uses xattr
>[    6.661466] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>[    6.679136] type=1403 audit(1355861234.953:2): policy loaded auid=4294967295 ses=4294967295
>[    6.699491] systemd[1]: Successfully loaded SELinux policy in 342ms 473us.
>[    6.794050] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.798620] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.832831] systemd[1]: Relabelled /dev and /run in 34ms 118us.
>[    6.863477] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.871435] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.879450] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.884389] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.889361] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.894354] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.899404] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.904332] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.904516] systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
>[    6.929658] systemd[1]: Set hostname to <mozart.ntkcz.cz>.
>[    8.365578] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[    9.522637] systemd-journald[422]: Fixed max_use=396.8M max_size=49.6M min_size=64.0K keep_free=198.4M
>[    9.590130] udevd[421]: starting version 182
>[    9.780026] systemd-journald[422]: Vacuuming...
>[    9.947975] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    9.948258] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    9.948489] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
>[   10.132177] EXT4-fs (dm-1): re-mounted. Opts: (null)
>[   11.145338] RPC: Registered named UNIX socket transport module.
>[   11.145340] RPC: Registered udp transport module.
>[   11.145341] RPC: Registered tcp transport module.
>[   11.145342] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   11.148960] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>[   11.468600] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[   11.469396] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>[   12.315788] parport_pc 00:0a: reported by Plug and Play ACPI
>[   12.315868] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
>[   12.343484] ppdev: user-space parallel port driver
>[   12.369516] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
>[   12.369524] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   12.369528] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
>[   12.369532] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   12.369533] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   12.393101] iTCO_vendor_support: vendor-support=0
>[   12.393976] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[   12.394004] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
>[   12.394296] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   12.415388] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
>[   12.415392] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
>[   12.415450] e1000e 0000:00:19.0: setting latency timer to 64
>[   12.415557] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[   12.415601] e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
>[   12.615752] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 2c:41:38:0a:f4:24
>[   12.615754] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>[   12.615805] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
>[   12.635254] type=1400 audit(1355861240.920:3): avc:  denied  { mmap_zero } for  pid=497 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
>[   12.742453] input: HP WMI hotkeys as /devices/virtual/input/input10
>[   12.794799] tun: Universal TUN/TAP device driver, 1.6
>[   12.794803] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[   12.976643] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x18
>[   13.006975] mei 0000:00:16.0: setting latency timer to 64
>[   13.007030] mei 0000:00:16.0: irq 55 for MSI/MSI-X
>[   13.010710] hp_accel: hardware type HPB64xx found
>[   13.011371] lis3lv02d: 8 bits 3DC sensor found
>[   13.045846] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input11
>[   13.046063] Registered led device: hp::hddprotect
>[   13.046077] hp_accel: driver loaded
>[   13.416344] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
>[   13.416364] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x18
>[   13.417636] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[   13.417645] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x18
>[   13.418937] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[   13.418942] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x18
>[   13.420178] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[   13.420194] perf_event_intel: PEBS enabled due to microcode update
>[   13.420230] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   13.690522] cfg80211: Calling CRDA to update world regulatory domain
>[   13.723020] Intel(R) Wireless WiFi driver for Linux, in-tree:d
>[   13.723025] Copyright(c) 2003-2012 Intel Corporation
>[   13.723103] iwlwifi 0000:25:00.0: pci_resource_len = 0x00002000
>[   13.723105] iwlwifi 0000:25:00.0: pci_resource_base = ffffc90011660000
>[   13.723108] iwlwifi 0000:25:00.0: HW Revision ID = 0x34
>[   13.723204] iwlwifi 0000:25:00.0: irq 56 for MSI/MSI-X
>[   13.781575] Linux media interface: v0.10
>[   13.781781] snd_hda_intel 0000:00:1b.0: irq 57 for MSI/MSI-X
>[   13.846824] Linux video capture interface: v2.00
>[   14.211179] Adding 8191996k swap on /dev/mapper/vg_mozart-swap.  Priority:0 extents:1 across:8191996k 
>[   14.234813] iwlwifi 0000:25:00.0: loaded firmware version 17.168.5.3 build 42301
>[   14.568518] ALSA sound/pci/hda/patch_sigmatel.c:5586 mute LED gpio 1 polarity 0
>[   14.568523] ALSA sound/pci/hda/hda_auto_parser.c:322 autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
>[   14.568524] ALSA sound/pci/hda/hda_auto_parser.c:326    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
>[   14.568526] ALSA sound/pci/hda/hda_auto_parser.c:330    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
>[   14.568527] ALSA sound/pci/hda/hda_auto_parser.c:331    mono: mono_out=0x0
>[   14.568528] ALSA sound/pci/hda/hda_auto_parser.c:335    inputs:
>[   14.568529] ALSA sound/pci/hda/hda_auto_parser.c:339      Mic=0xc
>[   14.568530] ALSA sound/pci/hda/hda_auto_parser.c:339      Line=0xf
>[   14.569129] ALSA sound/pci/hda/patch_sigmatel.c:3103 stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
>[   14.577327] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>[   14.577562] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
>[   14.577637] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
>[   14.577711] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
>[   14.582240] ALSA sound/pci/hda/hda_intel.c:2595 0000:01:00.1: Handle VGA-switcheroo audio client
>[   14.582243] ALSA sound/pci/hda/hda_intel.c:2779 Using LPIB position fix
>[   14.582311] snd_hda_intel 0000:01:00.1: irq 58 for MSI/MSI-X
>[   14.585922] ALSA sound/pci/hda/hda_intel.c:1633 Enable sync_write for stable communication
>[   14.964893] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (0461:4dce)
>[   15.093909] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
>[   15.222943] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input17
>[   15.223141] usbcore: registered new interface driver uvcvideo
>[   15.223144] USB Video Class driver (1.1.1)
>[   15.246539] cfg80211: World regulatory domain updated:
>[   15.246541] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   15.246543] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   15.246545] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   15.246547] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   15.246548] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   15.246549] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   15.381312] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
>[   15.381316] iwldvm: Copyright(c) 2003-2012 Intel Corporation
>[   15.381348] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUG enabled
>[   15.381352] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
>[   15.381356] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
>[   15.381360] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
>[   15.381363] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_P2P disabled
>[   15.381368] iwlwifi 0000:25:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
>[   15.381450] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
>[   15.381589] iwlwifi 0000:25:00.0: RF_KILL bit toggled to disable radio.
>[   15.392299] iwlwifi 0000:25:00.0: device EEPROM VER=0x715, CALIB=0x6
>[   15.392304] iwlwifi 0000:25:00.0: Device SKU: 0x1F0
>[   15.392308] iwlwifi 0000:25:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
>[   15.392425] Registered led device: phy0-led
>[   15.437323] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>[   16.763193] cfg80211: Calling CRDA for country: CZ
>[   16.766410] cfg80211: Regulatory domain changed to country: CZ
>[   16.766416] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   16.766421] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   16.766426] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
>[   16.766429] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   16.766433] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>[   19.534974] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[   19.544996] SELinux: initialized (dev sda1, type ext4), uses xattr
>[   22.850572] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
>[   22.850579] SELinux: initialized (dev dm-3, type ext4), uses xattr
>[   36.115259] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
>[   36.115276] SELinux: initialized (dev dm-7, type ext4), uses xattr
>[   36.756174] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>[   36.995058] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   37.004608] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   37.067062] Loading iSCSI transport class v2.0-870.
>[   37.079319] iscsi: registered transport (tcp)
>[   37.886538] iscsi: registered transport (iser)
>[   37.921227] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
>[   37.921230] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
>[   38.009438] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
>[   38.009458] iscsi: registered transport (cxgb3i)
>[   38.050375] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
>[   38.050423] iscsi: registered transport (cxgb4i)
>[   38.085811] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
>[   38.098817] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
>[   38.098867] iscsi: registered transport (bnx2i)
>[   38.297513] iscsi: registered transport (be2iscsi)
>[   39.137734] e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
>[   39.238508] e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
>[   39.238744] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   39.316560] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>[   39.316746] NFSD: starting 90-second grace period
>[   40.053184] Bridge firewalling registered
>[   40.083551] device virbr0-nic entered promiscuous mode
>[   40.937745] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
>[   41.393833] Ebtables v2.0 registered
>[   42.574697] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[   42.574735] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[   42.782978] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[   42.783082] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[   42.830659] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[   42.830767] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[   81.538246] fuse init (API version 7.20)
>[   81.570251] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>[   81.586934] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[  496.425339] xhci_hcd 0000:26:00.0: Timeout while waiting for address device command
>[  501.616329] xhci_hcd 0000:26:00.0: Timeout while waiting for address device command
>[  501.816988] usb 4-2: device not accepting address 2, error -62
>[  501.817303] xhci_hcd 0000:26:00.0: Bad Slot ID 1
>[  501.817312] xhci_hcd 0000:26:00.0: Could not allocate xHCI USB device data structures
>[  501.817322] hub 4-0:1.0: couldn't allocate port 2 usb_device
>[  530.144868] xhci_hcd 0000:26:00.0: Timeout while waiting for address device command
>[  535.335973] xhci_hcd 0000:26:00.0: Timeout while waiting for address device command
>[  535.540537] usb 4-2: device not accepting address 3, error -62
>[  535.540851] xhci_hcd 0000:26:00.0: Bad Slot ID 2
>[  535.540857] xhci_hcd 0000:26:00.0: Could not allocate xHCI USB device data structures
>[  535.540866] hub 4-0:1.0: couldn't allocate port 2 usb_device
>[  552.112906] xhci_hcd 0000:26:00.0: Timeout while waiting for address device command
>[  557.304042] xhci_hcd 0000:26:00.0: Timeout while waiting for address device command
>[  557.506596] usb 4-2: device not accepting address 4, error -62
>[  557.506917] xhci_hcd 0000:26:00.0: Bad Slot ID 3
>[  557.506925] xhci_hcd 0000:26:00.0: Could not allocate xHCI USB device data structures
>[  557.506935] hub 4-0:1.0: couldn't allocate port 2 usb_device
>[  570.308287] xhci_hcd 0000:26:00.0: Timeout while waiting for address device command
>[  575.499276] xhci_hcd 0000:26:00.0: Timeout while waiting for address device command
>[  575.699908] usb 4-1: device not accepting address 5, error -62
>[  575.700175] xhci_hcd 0000:26:00.0: Bad Slot ID 4
>[  575.700184] xhci_hcd 0000:26:00.0: Could not allocate xHCI USB device data structures
>[  575.700194] hub 4-0:1.0: couldn't allocate port 1 usb_device
>[  600.354743] hub 3-0:1.0: unable to enumerate USB device on port 1
>[  600.560660] usb 4-1: new SuperSpeed USB device number 6 using xhci_hcd
>[  600.573054] usb 4-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
>[  600.575821] usb 4-1: New USB device found, idVendor=0bc2, idProduct=2332
>[  600.575830] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[  600.575835] usb 4-1: Product: Portable
>[  600.575839] usb 4-1: Manufacturer: Seagate
>[  600.575844] usb 4-1: SerialNumber: 2GHH9B9X
>[  601.029172] Initializing USB Mass Storage driver...
>[  601.029284] scsi6 : usb-storage 4-1:1.0
>[  601.029380] usbcore: registered new interface driver usb-storage
>[  601.029381] USB Mass Storage support registered.
>[  602.031658] scsi 6:0:0:0: Direct-Access     Seagate  Portable         SF06 PQ: 0 ANSI: 4
>[  602.033890] sd 6:0:0:0: Attached scsi generic sg2 type 0
>[  602.033974] sd 6:0:0:0: [sdb] 1953525164 512-byte logical blocks: (1.00 TB/931 GiB)
>[  602.034391] sd 6:0:0:0: [sdb] Write Protect is off
>[  602.034403] sd 6:0:0:0: [sdb] Mode Sense: bf 00 00 00
>[  602.034816] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[  602.060195]  sdb: sdb1
>[  602.061842] sd 6:0:0:0: [sdb] Attached SCSI disk
>[  603.040888] SELinux: initialized (dev sdb1, type fuseblk), uses genfs_contexts
>[  615.432065] mmc0: new SDHC card at address e624
>[  615.469650] mmcblk0: mmc0:e624 SD16G 14.8 GiB 
>[  615.479022]  mmcblk0: p1
>[  616.037263] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
>[ 2069.175376] type=1400 audit(1355776908.450:4): avc:  denied  { open } for  pid=3546 comm="openvpn" path="/home/vagojan/.cert/v.jansa@stk.cz-cert.pem" dev="dm-7" ino=2626537 scontext=system_u:system_r:openvpn_t:s0 tcontext=unconfined_u:object_r:user_home_t:s0 tclass=file
>[40108.296033] mmc0: card e624 removed
>[41907.814379] mmc0: new SDHC card at address e624
>[41907.814856] mmcblk0: mmc0:e624 SD16G 14.8 GiB 
>[41907.824460]  mmcblk0: p1
>[41908.470883] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
>[77200.970840] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
>[77201.059209] usb 2-1.2: New USB device found, idVendor=1307, idProduct=0163
>[77201.059219] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[77201.059225] usb 2-1.2: Product: Flash Disk
>[77201.059230] usb 2-1.2: Manufacturer: USB 2.0
>[77201.059234] usb 2-1.2: SerialNumber: a003615528d66f
>[77201.060660] scsi7 : usb-storage 2-1.2:1.0
>[77202.062105] scsi 7:0:0:0: Direct-Access     USB 2.0  Flash Disk       0.00 PQ: 0 ANSI: 2
>[77202.064523] sd 7:0:0:0: Attached scsi generic sg3 type 0
>[77202.065259] sd 7:0:0:0: [sdc] 4014079 512-byte logical blocks: (2.05 GB/1.91 GiB)
>[77202.066249] sd 7:0:0:0: [sdc] Write Protect is off
>[77202.066256] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00
>[77202.067259] sd 7:0:0:0: [sdc] Asking for cache data failed
>[77202.067268] sd 7:0:0:0: [sdc] Assuming drive cache: write through
>[77202.073376] sd 7:0:0:0: [sdc] Asking for cache data failed
>[77202.073389] sd 7:0:0:0: [sdc] Assuming drive cache: write through
>[77202.129020]  sdc: sdc1
>[77202.132736] sd 7:0:0:0: [sdc] Asking for cache data failed
>[77202.132741] sd 7:0:0:0: [sdc] Assuming drive cache: write through
>[77202.132745] sd 7:0:0:0: [sdc] Attached SCSI removable disk
>[77219.797040] SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts
>[77393.124002] sdc: detected capacity change from 2055208448 to 0
>[77402.797421] usb 2-1.2: USB disconnect, device number 4
>[124341.596498] gnome-shell[1769]: segfault at ffffffff ip 000000317526188f sp 00007fffc3d369b0 error 4 in libglib-2.0.so.0.3200.4[3175200000+11d000]
>[124840.076752] PM: Syncing filesystems ... done.
>[124840.759054] PM: Preparing system for mem sleep
>[124841.350751] mmc0: card e624 removed
>[124841.354030] Freezing user space processes ... (elapsed 0.09 seconds) done.
>[124841.453226] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[124841.464214] PM: Entering mem sleep
>[124841.464300] Suspending console(s) (use no_console_suspend to debug)
>[124841.464808] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[124841.465031] sd 0:0:0:0: [sda] Stopping disk
>[124841.524691] parport_pc 00:0a: disabled
>[124841.524881] serial 00:09: disabled
>[124841.525266] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[124841.525369] ACPI handle has no context!
>[124841.577208] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[124841.738567] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[124842.473204] PM: suspend of devices complete after 1010.724 msecs
>[124842.473326] PM: late suspend of devices complete after 0.120 msecs
>[124842.473461] pcieport 0000:00:1c.7: wake-up capability enabled by ACPI
>[124842.495207] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[124842.506075] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[124842.528032] PM: noirq suspend of devices complete after 54.806 msecs
>[124842.528697] ACPI: Preparing to enter system sleep state S3
>[124842.534106] PM: Saving platform NVS memory
>[124842.537041] Disabling non-boot CPUs ...
>[124842.538519] smpboot: CPU 1 is now offline
>[124842.538792] CPU 1 offline: Remove Rx thread
>[124842.540075] smpboot: CPU 2 is now offline
>[124842.540402] CPU 2 offline: Remove Rx thread
>[124842.540627] Broke affinity for irq 16
>[124842.540630] Broke affinity for irq 41
>[124842.540633] Broke affinity for irq 43
>[124842.540636] Broke affinity for irq 45
>[124842.540641] Broke affinity for irq 49
>[124842.540644] Broke affinity for irq 51
>[124842.541662] smpboot: CPU 3 is now offline
>[124842.541902] CPU 3 offline: Remove Rx thread
>[124842.542016] Extended CMOS year: 2000
>[124842.542874] ACPI: Low-level resume complete
>[124842.542912] PM: Restoring platform NVS memory
>[124842.543377] Extended CMOS year: 2000
>[124842.543956] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
>[124842.543960] Enabling non-boot CPUs ...
>[124842.544066] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[124842.558717] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[124842.558721] bnx2i: CPU 1 online: Create Rx thread
>[124842.558741] CPU1 is up
>[124842.558785] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[124842.572627] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[124842.572630] bnx2i: CPU 2 online: Create Rx thread
>[124842.572647] CPU2 is up
>[124842.572682] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[124842.586549] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[124842.586553] bnx2i: CPU 3 online: Create Rx thread
>[124842.586574] CPU3 is up
>[124842.589841] ACPI: Waking up from system sleep state S3
>[124842.675140] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[124842.685074] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[124842.707074] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[124842.783987] pcieport 0000:00:1c.7: wake-up capability disabled by ACPI
>[124842.784055] PM: noirq resume of devices complete after 152.751 msecs
>[124842.784129] PM: early resume of devices complete after 0.040 msecs
>[124842.784176] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[124842.784192] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[124842.784225] mei 0000:00:16.0: irq 54 for MSI/MSI-X
>[124842.784278] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[124842.784299] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
>[124842.784320] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[124842.784323] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[124842.784325] ahci 0000:00:1f.2: setting latency timer to 64
>[124842.784488] snd_hda_intel 0000:01:00.1: irq 58 for MSI/MSI-X
>[124842.784492] iwlwifi 0000:25:00.0: RF_KILL bit toggled to disable radio.
>[124842.787276] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[124842.787277] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[124842.913683] serial 00:09: activated
>[124842.914542] parport_pc 00:0a: activated
>[124843.017517] usb 2-1.4: reset high-speed USB device number 3 using ehci_hcd
>[124843.111234] ata4: SATA link down (SStatus 0 SControl 300)
>[124843.111280] ata5: SATA link down (SStatus 0 SControl 300)
>[124843.115227] ata6: SATA link down (SStatus 0 SControl 300)
>[124843.215032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[124843.218325] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[124843.222036] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[124843.222039] ata2.00: configured for UDMA/100
>[124843.972084] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[124843.972193] radeon 0000:01:00.0: WB enabled
>[124843.972195] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022d078c00
>[124843.988510] [drm] ring test on 0 succeeded in 3 usecs
>[124843.988570] [drm] ib test on ring 0 succeeded in 0 usecs
>[124844.463755] firewire_core 0000:24:00.0: rediscovered device fw0
>[124845.398952] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[124845.400089] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[124845.401469] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[124845.401619] ata1.00: configured for UDMA/100
>[124845.401741] sd 0:0:0:0: [sda] Starting disk
>[124847.120260] PM: resume of devices complete after 4344.388 msecs
>[124847.120387] PM: Finishing wakeup.
>[124847.120388] Restarting tasks ... done.
>[124847.139699] video LNXVIDEO:00: Restoring backlight state
>[124847.331409] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[124847.431108] mmc0: new SDHC card at address e624
>[124847.431783] mmcblk0: mmc0:e624 SD16G 14.8 GiB 
>[124847.432044] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[124847.432239] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[124847.441362]  mmcblk0: p1
>[124850.747395] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[124850.747456] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[124857.569443] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
>[124862.716062] mmc0: card e624 removed
>[124877.651325] usb 4-1: USB disconnect, device number 6
>[124898.187128] PM: Syncing filesystems ... done.
>[124898.207085] PM: Preparing system for mem sleep
>[124898.575737] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[124898.587446] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[124898.598510] PM: Entering mem sleep
>[124898.598596] Suspending console(s) (use no_console_suspend to debug)
>[124898.598904] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[124898.598970] sd 0:0:0:0: [sda] Stopping disk
>[124898.659991] parport_pc 00:0a: disabled
>[124898.660176] serial 00:09: disabled
>[124898.660389] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[124898.660456] ACPI handle has no context!
>[124898.712360] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[124898.877126] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[124899.507647] PM: suspend of devices complete after 910.682 msecs
>[124899.507766] PM: late suspend of devices complete after 0.117 msecs
>[124899.507900] pcieport 0000:00:1c.7: wake-up capability enabled by ACPI
>[124899.529644] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[124899.540715] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[124899.562498] PM: noirq suspend of devices complete after 54.832 msecs
>[124899.563163] ACPI: Preparing to enter system sleep state S3
>[124899.568554] PM: Saving platform NVS memory
>[124899.571457] Disabling non-boot CPUs ...
>[124899.572925] smpboot: CPU 1 is now offline
>[124899.573187] CPU 1 offline: Remove Rx thread
>[124899.574476] smpboot: CPU 2 is now offline
>[124899.574674] CPU 2 offline: Remove Rx thread
>[124899.574940] Broke affinity for irq 16
>[124899.574944] Broke affinity for irq 41
>[124899.574946] Broke affinity for irq 43
>[124899.574949] Broke affinity for irq 45
>[124899.574954] Broke affinity for irq 49
>[124899.574956] Broke affinity for irq 51
>[124899.575974] smpboot: CPU 3 is now offline
>[124899.576214] CPU 3 offline: Remove Rx thread
>[124899.576323] Extended CMOS year: 2000
>[124899.577186] ACPI: Low-level resume complete
>[124899.577224] PM: Restoring platform NVS memory
>[124899.577689] Extended CMOS year: 2000
>[124899.578292] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
>[124899.578321] Enabling non-boot CPUs ...
>[124899.578406] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[124899.592782] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[124899.592790] bnx2i: CPU 1 online: Create Rx thread
>[124899.592810] CPU1 is up
>[124899.592853] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[124899.606671] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[124899.606678] bnx2i: CPU 2 online: Create Rx thread
>[124899.606695] CPU2 is up
>[124899.606730] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[124899.620534] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[124899.620537] bnx2i: CPU 3 online: Create Rx thread
>[124899.620554] CPU3 is up
>[124899.623923] ACPI: Waking up from system sleep state S3
>[124899.708597] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[124899.718522] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[124899.740522] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[124899.817431] pcieport 0000:00:1c.7: wake-up capability disabled by ACPI
>[124899.817494] PM: noirq resume of devices complete after 152.738 msecs
>[124899.817568] PM: early resume of devices complete after 0.037 msecs
>[124899.817614] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[124899.817632] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[124899.817672] mei 0000:00:16.0: irq 54 for MSI/MSI-X
>[124899.817714] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[124899.817738] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
>[124899.817746] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[124899.817749] ahci 0000:00:1f.2: setting latency timer to 64
>[124899.817759] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[124899.817883] snd_hda_intel 0000:01:00.1: irq 58 for MSI/MSI-X
>[124899.818018] iwlwifi 0000:25:00.0: RF_KILL bit toggled to disable radio.
>[124899.820687] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[124899.820688] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[124900.047959] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd
>[124900.148665] ata5: SATA link down (SStatus 0 SControl 300)
>[124900.150685] ata6: SATA link down (SStatus 0 SControl 300)
>[124900.152672] ata4: SATA link down (SStatus 0 SControl 300)
>[124900.205656] usb 2-1.4: reset high-speed USB device number 3 using ehci_hcd
>[124900.248477] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[124900.251789] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[124900.255291] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[124900.255293] ata2.00: configured for UDMA/100
>[124900.368245] firewire_core 0000:24:00.0: rediscovered device fw0
>[124900.408276] usb 1-1.4.2: reset full-speed USB device number 5 using ehci_hcd
>[124900.495217] serial 00:09: activated
>[124900.495995] parport_pc 00:0a: activated
>[124900.947263] usb 1-1.4.2.1: reset low-speed USB device number 6 using ehci_hcd
>[124901.007862] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[124901.007967] radeon 0000:01:00.0: WB enabled
>[124901.007968] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022d078c00
>[124901.024259] [drm] ring test on 0 succeeded in 3 usecs
>[124901.024319] [drm] ib test on ring 0 succeeded in 0 usecs
>[124901.472462] usb 1-1.4.2.4: reset low-speed USB device number 7 using ehci_hcd
>[124902.384502] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[124902.385659] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[124902.387038] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[124902.387191] ata1.00: configured for UDMA/100
>[124902.387361] sd 0:0:0:0: [sda] Starting disk
>[124902.389082] Extended CMOS year: 2000
>[124902.573340] PM: resume of devices complete after 2761.022 msecs
>[124902.573444] PM: Finishing wakeup.
>[124902.573445] Restarting tasks ... done.
>[124902.578012] video LNXVIDEO:00: Restoring backlight state
>[124902.799243] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[124902.899700] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[124902.899979] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[124906.341664] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[124906.341731] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[127700.476681] usb 1-1.4.4: new low-speed USB device number 8 using ehci_hcd
>[127700.577185] usb 1-1.4.4: New USB device found, idVendor=04d9, idProduct=2519
>[127700.577195] usb 1-1.4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[127700.577241] usb 1-1.4.4: Product: VISENTA V1 
>[127700.590832] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/input/input18
>[127700.591663] hid-generic 0003:04D9:2519.0004: input,hidraw3: USB HID v1.10 Keyboard [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input0
>[127700.606782] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/input/input19
>[127700.607694] hid-generic 0003:04D9:2519.0005: input,hidraw4: USB HID v1.10 Mouse [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input1
>[127746.293549] usb 1-1.4.4: USB disconnect, device number 8
>[127752.347045] usb 1-1.4.4: new low-speed USB device number 9 using ehci_hcd
>[127752.448282] usb 1-1.4.4: New USB device found, idVendor=04d9, idProduct=2519
>[127752.448292] usb 1-1.4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[127752.448298] usb 1-1.4.4: Product: VISENTA V1 
>[127752.462620] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/input/input20
>[127752.463222] hid-generic 0003:04D9:2519.0006: input,hidraw3: USB HID v1.10 Keyboard [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input0
>[127752.478866] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/input/input21
>[127752.479763] hid-generic 0003:04D9:2519.0007: input,hidraw4: USB HID v1.10 Mouse [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input1
>[158658.577521] usb 1-1.4.4: USB disconnect, device number 9
>[158662.842136] usb 1-1.4.4: new low-speed USB device number 10 using ehci_hcd
>[158662.943045] usb 1-1.4.4: New USB device found, idVendor=04d9, idProduct=2519
>[158662.943055] usb 1-1.4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[158662.943061] usb 1-1.4.4: Product: VISENTA V1 
>[158662.957387] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/input/input22
>[158662.958090] hid-generic 0003:04D9:2519.0008: input,hidraw3: USB HID v1.10 Keyboard [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input0
>[158662.973410] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/input/input23
>[158662.974507] hid-generic 0003:04D9:2519.0009: input,hidraw4: USB HID v1.10 Mouse [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input1
>[158698.949094] usb 1-1.4.4: USB disconnect, device number 10
>[158701.936602] usb 1-1.4.4: new low-speed USB device number 11 using ehci_hcd
>[158702.038289] usb 1-1.4.4: New USB device found, idVendor=04d9, idProduct=2519
>[158702.038300] usb 1-1.4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[158702.038305] usb 1-1.4.4: Product: VISENTA V1 
>[158702.051998] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/input/input24
>[158702.052728] hid-generic 0003:04D9:2519.000A: input,hidraw3: USB HID v1.10 Keyboard [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input0
>[158702.068141] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/input/input25
>[158702.069168] hid-generic 0003:04D9:2519.000B: input,hidraw4: USB HID v1.10 Mouse [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input1
>[158835.402313] PM: Syncing filesystems ... done.
>[158835.422305] PM: Preparing system for mem sleep
>[158835.809861] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[158835.821479] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[158835.832547] PM: Entering mem sleep
>[158835.832632] Suspending console(s) (use no_console_suspend to debug)
>[158835.833133] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[158835.833406] sd 0:0:0:0: [sda] Stopping disk
>[158835.893513] parport_pc 00:0a: disabled
>[158835.893695] serial 00:09: disabled
>[158835.894099] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[158835.894205] ACPI handle has no context!
>[158835.946061] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[158836.111509] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[158836.829545] PM: suspend of devices complete after 998.709 msecs
>[158836.829664] PM: late suspend of devices complete after 0.118 msecs
>[158836.829825] pcieport 0000:00:1c.7: wake-up capability enabled by ACPI
>[158836.851536] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[158836.862606] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[158836.884387] PM: noirq suspend of devices complete after 54.823 msecs
>[158836.885052] ACPI: Preparing to enter system sleep state S3
>[158836.890443] PM: Saving platform NVS memory
>[158836.893449] Disabling non-boot CPUs ...
>[158836.894908] smpboot: CPU 1 is now offline
>[158836.895157] CPU 1 offline: Remove Rx thread
>[158836.896443] smpboot: CPU 2 is now offline
>[158836.896643] CPU 2 offline: Remove Rx thread
>[158836.896906] Broke affinity for irq 16
>[158836.896910] Broke affinity for irq 41
>[158836.896913] Broke affinity for irq 43
>[158836.896915] Broke affinity for irq 45
>[158836.896920] Broke affinity for irq 49
>[158836.896923] Broke affinity for irq 51
>[158836.897942] smpboot: CPU 3 is now offline
>[158836.898138] CPU 3 offline: Remove Rx thread
>[158836.898251] Extended CMOS year: 2000
>[158836.899114] ACPI: Low-level resume complete
>[158836.899153] PM: Restoring platform NVS memory
>[158836.899619] Extended CMOS year: 2000
>[158836.900169] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
>[158836.900198] Enabling non-boot CPUs ...
>[158836.900285] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[158836.914684] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[158836.914692] bnx2i: CPU 1 online: Create Rx thread
>[158836.914711] CPU1 is up
>[158836.914754] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[158836.928577] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[158836.928580] bnx2i: CPU 2 online: Create Rx thread
>[158836.928599] CPU2 is up
>[158836.928633] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[158836.942441] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[158836.942444] bnx2i: CPU 3 online: Create Rx thread
>[158836.942459] CPU3 is up
>[158836.945824] ACPI: Waking up from system sleep state S3
>[158837.045458] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[158837.055381] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[158837.077383] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[158837.154292] pcieport 0000:00:1c.7: wake-up capability disabled by ACPI
>[158837.154359] PM: noirq resume of devices complete after 152.810 msecs
>[158837.154434] PM: early resume of devices complete after 0.039 msecs
>[158837.154491] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[158837.154527] mei 0000:00:16.0: irq 54 for MSI/MSI-X
>[158837.154565] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[158837.154571] e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
>[158837.154649] snd_hda_intel 0000:00:1b.0: irq 57 for MSI/MSI-X
>[158837.154701] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[158837.154736] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[158837.154761] ahci 0000:00:1f.2: setting latency timer to 64
>[158837.156194] snd_hda_intel 0000:01:00.1: irq 58 for MSI/MSI-X
>[158837.156337] iwlwifi 0000:25:00.0: RF_KILL bit toggled to disable radio.
>[158837.159316] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[158837.159317] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[158837.310624] serial 00:09: activated
>[158837.311481] parport_pc 00:0a: activated
>[158837.387848] usb 2-1.4: reset high-speed USB device number 3 using ehci_hcd
>[158837.469562] ata6: SATA link down (SStatus 0 SControl 300)
>[158837.471569] ata5: SATA link down (SStatus 0 SControl 300)
>[158837.475553] ata4: SATA link down (SStatus 0 SControl 300)
>[158837.546551] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd
>[158837.575347] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[158837.578659] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[158837.582203] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[158837.582205] ata2.00: configured for UDMA/100
>[158837.707097] firewire_core 0000:24:00.0: rediscovered device fw0
>[158838.335439] mei 0000:00:16.0: unexpected reset.
>[158838.343601] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[158838.343708] radeon 0000:01:00.0: WB enabled
>[158838.343710] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022d078c00
>[158838.360022] [drm] ring test on 0 succeeded in 3 usecs
>[158838.360082] [drm] ib test on ring 0 succeeded in 0 usecs
>[158839.768274] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[158839.769382] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[158839.770625] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[158839.770775] ata1.00: configured for UDMA/100
>[158839.770864] sd 0:0:0:0: [sda] Starting disk
>[158839.772672] Extended CMOS year: 2000
>[158839.901245] PM: resume of devices complete after 2752.044 msecs
>[158839.901349] PM: Finishing wakeup.
>[158839.901350] Restarting tasks ... done.
>[158839.902717] video LNXVIDEO:00: Restoring backlight state
>[158839.905087] usb 1-1.4.2: USB disconnect, device number 5
>[158839.905091] usb 1-1.4.2.1: USB disconnect, device number 6
>[158839.939036] usb 1-1.4.2.4: USB disconnect, device number 7
>[158839.953357] usb 1-1.4.4: USB disconnect, device number 11
>[158840.114661] e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
>[158840.215494] e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
>[158840.215777] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[158841.735377] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
>[158841.735384] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
>[158841.735435] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[158963.885264] type=1400 audit(1355986959.495:5): avc:  denied  { open } for  pid=13242 comm="openvpn" path="/home/vagojan/.cert/sava/Vasek.crt" dev="dm-7" ino=2626542 scontext=system_u:system_r:openvpn_t:s0 tcontext=unconfined_u:object_r:user_home_t:s0 tclass=file
>[187958.297501] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[188063.339549] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[188418.348202] PM: Syncing filesystems ... done.
>[188418.663143] PM: Preparing system for mem sleep
>[188419.288366] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[188419.300119] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[188419.311131] PM: Entering mem sleep
>[188419.311206] Suspending console(s) (use no_console_suspend to debug)
>[188419.311533] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[188419.325742] sd 0:0:0:0: [sda] Stopping disk
>[188419.375390] parport_pc 00:0a: disabled
>[188419.375574] serial 00:09: disabled
>[188419.375931] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[188419.376012] ACPI handle has no context!
>[188419.440615] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[188419.593461] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[188420.162370] PM: suspend of devices complete after 852.683 msecs
>[188420.162499] PM: late suspend of devices complete after 0.113 msecs
>[188420.162655] pcieport 0000:00:1c.7: wake-up capability enabled by ACPI
>[188420.184410] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[188420.195466] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[188420.217247] PM: noirq suspend of devices complete after 54.847 msecs
>[188420.217913] ACPI: Preparing to enter system sleep state S3
>[188420.223298] PM: Saving platform NVS memory
>[188420.226209] Disabling non-boot CPUs ...
>[188420.227696] smpboot: CPU 1 is now offline
>[188420.227994] CPU 1 offline: Remove Rx thread
>[188420.229273] smpboot: CPU 2 is now offline
>[188420.229510] CPU 2 offline: Remove Rx thread
>[188420.229733] Broke affinity for irq 16
>[188420.229736] Broke affinity for irq 41
>[188420.229740] Broke affinity for irq 43
>[188420.229742] Broke affinity for irq 45
>[188420.229747] Broke affinity for irq 49
>[188420.229750] Broke affinity for irq 51
>[188420.230767] smpboot: CPU 3 is now offline
>[188420.231014] CPU 3 offline: Remove Rx thread
>[188420.231111] Extended CMOS year: 2000
>[188420.231971] ACPI: Low-level resume complete
>[188420.232010] PM: Restoring platform NVS memory
>[188420.232467] Extended CMOS year: 2000
>[188420.233018] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
>[188420.233048] Enabling non-boot CPUs ...
>[188420.233135] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[188420.247489] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[188420.247495] bnx2i: CPU 1 online: Create Rx thread
>[188420.247516] CPU1 is up
>[188420.247561] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[188420.261385] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[188420.261388] bnx2i: CPU 2 online: Create Rx thread
>[188420.261415] CPU2 is up
>[188420.261454] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[188420.275290] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[188420.275293] bnx2i: CPU 3 online: Create Rx thread
>[188420.275310] CPU3 is up
>[188420.278649] ACPI: Waking up from system sleep state S3
>[188420.358340] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[188420.367269] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[188420.389267] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[188420.466179] pcieport 0000:00:1c.7: wake-up capability disabled by ACPI
>[188420.466241] PM: noirq resume of devices complete after 151.741 msecs
>[188420.466314] PM: early resume of devices complete after 0.036 msecs
>[188420.466386] mei 0000:00:16.0: irq 54 for MSI/MSI-X
>[188420.466393] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[188420.466418] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[188420.466442] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[188420.466481] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[188420.466488] ahci 0000:00:1f.2: setting latency timer to 64
>[188420.466517] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
>[188420.466589] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[188420.466673] snd_hda_intel 0000:01:00.1: irq 58 for MSI/MSI-X
>[188420.466834] iwlwifi 0000:25:00.0: RF_KILL bit toggled to disable radio.
>[188420.469730] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[188420.469731] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[188420.625858] serial 00:09: activated
>[188420.626697] parport_pc 00:0a: activated
>[188420.696688] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd
>[188420.777459] ata4: SATA link down (SStatus 0 SControl 300)
>[188420.779459] ata6: SATA link down (SStatus 0 SControl 300)
>[188420.781456] ata5: SATA link down (SStatus 0 SControl 300)
>[188420.854382] usb 2-1.4: reset high-speed USB device number 3 using ehci_hcd
>[188420.885236] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[188420.888505] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[188420.892516] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[188420.892519] ata2.00: configured for UDMA/100
>[188421.019041] firewire_core 0000:24:00.0: rediscovered device fw0
>[188421.656097] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[188421.656201] radeon 0000:01:00.0: WB enabled
>[188421.656203] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022d078c00
>[188421.672492] [drm] ring test on 0 succeeded in 3 usecs
>[188421.672552] [drm] ib test on ring 0 succeeded in 0 usecs
>[188423.066269] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[188423.067387] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[188423.068768] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[188423.068919] ata1.00: configured for UDMA/100
>[188423.069074] sd 0:0:0:0: [sda] Starting disk
>[188423.070728] Extended CMOS year: 2000
>[188423.475609] PM: resume of devices complete after 3015.028 msecs
>[188423.475711] PM: Finishing wakeup.
>[188423.475712] Restarting tasks ... done.
>[188423.495416] video LNXVIDEO:00: Restoring backlight state
>[188423.719048] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[188423.820314] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[188423.820574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[188425.341797] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
>[188425.341814] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
>[188425.342243] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[188436.045465] type=1400 audit(1356074612.638:6): avc:  denied  { open } for  pid=20116 comm="openvpn" path="/home/vagojan/.cert/sava/Vasek.crt" dev="dm-7" ino=2626542 scontext=system_u:system_r:openvpn_t:s0 tcontext=unconfined_u:object_r:user_home_t:s0 tclass=file
>[210303.658231] PM: Syncing filesystems ... done.
>[210304.057045] PM: Preparing system for mem sleep
>[210304.154318] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[210304.166113] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[210304.177102] PM: Entering mem sleep
>[210304.177188] Suspending console(s) (use no_console_suspend to debug)
>[210304.177730] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[210304.177899] sd 0:0:0:0: [sda] Stopping disk
>[210304.238519] parport_pc 00:0a: disabled
>[210304.238712] serial 00:09: disabled
>[210304.239048] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[210304.239143] ACPI handle has no context!
>[210304.303097] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[210304.457113] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[210304.926588] PM: suspend of devices complete after 750.723 msecs
>[210304.926700] PM: late suspend of devices complete after 0.109 msecs
>[210304.926857] pcieport 0000:00:1c.7: wake-up capability enabled by ACPI
>[210304.948579] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[210304.959651] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[210304.981433] PM: noirq suspend of devices complete after 54.833 msecs
>[210304.982098] ACPI: Preparing to enter system sleep state S3
>[210304.987485] PM: Saving platform NVS memory
>[210304.990591] Disabling non-boot CPUs ...
>[210304.992039] smpboot: CPU 1 is now offline
>[210304.992284] CPU 1 offline: Remove Rx thread
>[210304.993561] smpboot: CPU 2 is now offline
>[210304.993804] CPU 2 offline: Remove Rx thread
>[210304.994046] Broke affinity for irq 16
>[210304.994049] Broke affinity for irq 41
>[210304.994052] Broke affinity for irq 43
>[210304.994055] Broke affinity for irq 45
>[210304.994060] Broke affinity for irq 49
>[210304.994062] Broke affinity for irq 51
>[210304.995079] smpboot: CPU 3 is now offline
>[210304.995335] CPU 3 offline: Remove Rx thread
>[210304.995434] Extended CMOS year: 2000
>[210304.996295] ACPI: Low-level resume complete
>[210304.996334] PM: Restoring platform NVS memory
>[210304.996798] Extended CMOS year: 2000
>[210304.997360] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
>[210304.997383] Enabling non-boot CPUs ...
>[210304.997473] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[210305.011847] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[210305.011854] bnx2i: CPU 1 online: Create Rx thread
>[210305.011873] CPU1 is up
>[210305.011916] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[210305.025740] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[210305.025743] bnx2i: CPU 2 online: Create Rx thread
>[210305.025764] CPU2 is up
>[210305.025798] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[210305.039652] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[210305.039660] bnx2i: CPU 3 online: Create Rx thread
>[210305.039680] CPU3 is up
>[210305.043101] ACPI: Waking up from system sleep state S3
>[210305.133514] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[210305.141444] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[210305.163444] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[210305.240355] pcieport 0000:00:1c.7: wake-up capability disabled by ACPI
>[210305.240416] PM: noirq resume of devices complete after 150.746 msecs
>[210305.240489] PM: early resume of devices complete after 0.036 msecs
>[210305.240564] mei 0000:00:16.0: irq 54 for MSI/MSI-X
>[210305.240576] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[210305.240589] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[210305.240622] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[210305.240658] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[210305.240659] ahci 0000:00:1f.2: setting latency timer to 64
>[210305.240676] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
>[210305.240737] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[210305.240829] snd_hda_intel 0000:01:00.1: irq 58 for MSI/MSI-X
>[210305.240959] iwlwifi 0000:25:00.0: RF_KILL bit toggled to disable radio.
>[210305.243926] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[210305.243927] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[210305.399240] serial 00:09: activated
>[210305.400126] parport_pc 00:0a: activated
>[210305.471944] usb 2-1.4: reset high-speed USB device number 3 using ehci_hcd
>[210305.555627] ata4: SATA link down (SStatus 0 SControl 300)
>[210305.557624] ata5: SATA link down (SStatus 0 SControl 300)
>[210305.559609] ata6: SATA link down (SStatus 0 SControl 300)
>[210305.630522] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd
>[210305.665416] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[210305.668631] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[210305.672176] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[210305.672179] ata2.00: configured for UDMA/100
>[210305.791175] firewire_core 0000:24:00.0: rediscovered device fw0
>[210306.430540] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[210306.430645] radeon 0000:01:00.0: WB enabled
>[210306.430647] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022d078c00
>[210306.446945] [drm] ring test on 0 succeeded in 3 usecs
>[210306.447005] [drm] ib test on ring 0 succeeded in 0 usecs
>[210307.674802] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[210307.674803] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[210307.851343] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[210307.852483] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[210307.853858] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[210307.854009] ata1.00: configured for UDMA/100
>[210307.854124] sd 0:0:0:0: [sda] Starting disk
>[210307.855916] Extended CMOS year: 2000
>[210308.178163] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[210308.178164] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[210308.242779] PM: resume of devices complete after 3008.008 msecs
>[210308.242956] PM: Finishing wakeup.
>[210308.242957] Restarting tasks ... done.
>[210308.250984] video LNXVIDEO:00: Restoring backlight state
>[210308.319039] usb 1-1.4.2: new full-speed USB device number 12 using ehci_hcd
>[210308.403794] usb 1-1.4.2: New USB device found, idVendor=0557, idProduct=7000
>[210308.403797] usb 1-1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[210308.404286] hub 1-1.4.2:1.0: USB hub found
>[210308.404378] hub 1-1.4.2:1.0: 4 ports detected
>[210308.441915] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[210308.478120] usb 1-1.4.4: new low-speed USB device number 13 using ehci_hcd
>[210308.542076] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[210308.542391] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[210308.577822] usb 1-1.4.4: New USB device found, idVendor=04d9, idProduct=2519
>[210308.577864] usb 1-1.4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[210308.577877] usb 1-1.4.4: Product: VISENTA V1 
>[210308.590262] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/input/input26
>[210308.590835] hid-generic 0003:04D9:2519.000C: input,hidraw0: USB HID v1.10 Keyboard [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input0
>[210308.605938] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/input/input27
>[210308.606545] hid-generic 0003:04D9:2519.000D: input,hidraw1: USB HID v1.10 Mouse [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input1
>[210308.679956] usb 1-1.4.2.1: new low-speed USB device number 14 using ehci_hcd
>[210308.789916] usb 1-1.4.2.1: New USB device found, idVendor=1c4f, idProduct=0002
>[210308.789926] usb 1-1.4.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[210308.789932] usb 1-1.4.2.1: Product: USB Keykoard
>[210308.789936] usb 1-1.4.2.1: Manufacturer: USB
>[210308.803248] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.1/1-1.4.2.1:1.0/input/input28
>[210308.803806] hid-generic 0003:1C4F:0002.000E: input,hidraw2: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.4.2.1/input0
>[210308.816321] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.1/1-1.4.2.1:1.1/input/input29
>[210308.816818] hid-generic 0003:1C4F:0002.000F: input,hidraw3: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.4.2.1/input1
>[210308.889636] usb 1-1.4.2.4: new low-speed USB device number 15 using ehci_hcd
>[210308.970647] usb 1-1.4.2.4: New USB device found, idVendor=046d, idProduct=c046
>[210308.970657] usb 1-1.4.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[210308.970663] usb 1-1.4.2.4: Product: USB Optical Mouse
>[210308.970667] usb 1-1.4.2.4: Manufacturer: Logitech
>[210308.975511] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.4/1-1.4.2.4:1.0/input/input30
>[210308.976259] hid-generic 0003:046D:C046.0010: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.4.2.4/input0
>[210311.849356] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[210311.849411] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[210345.212792] type=1400 audit(1356108184.539:7): avc:  denied  { open } for  pid=25151 comm="openvpn" path="/home/vagojan/.cert/v.jansa@stk.cz-cert.pem" dev="dm-7" ino=2626537 scontext=system_u:system_r:openvpn_t:s0 tcontext=unconfined_u:object_r:user_home_t:s0 tclass=file
>[214028.501973] PM: Syncing filesystems ... done.
>[214028.780523] PM: Preparing system for mem sleep
>[214029.187005] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[214029.187006] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[214029.189200] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[214029.189200] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[214029.222820] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[214029.222821] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[214029.237275] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[214029.248956] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[214029.260026] PM: Entering mem sleep
>[214029.260113] Suspending console(s) (use no_console_suspend to debug)
>[214029.261017] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[214029.261101] sd 0:0:0:0: [sda] Stopping disk
>[214029.322379] parport_pc 00:0a: disabled
>[214029.322570] serial 00:09: disabled
>[214029.322823] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[214029.322945] ACPI handle has no context!
>[214029.374674] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[214029.540954] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[214030.272988] PM: suspend of devices complete after 1014.700 msecs
>[214030.273111] PM: late suspend of devices complete after 0.121 msecs
>[214030.273269] pcieport 0000:00:1c.7: wake-up capability enabled by ACPI
>[214030.294988] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[214030.306073] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[214030.327847] PM: noirq suspend of devices complete after 54.836 msecs
>[214030.328513] ACPI: Preparing to enter system sleep state S3
>[214030.333905] PM: Saving platform NVS memory
>[214030.337043] Disabling non-boot CPUs ...
>[214030.338485] smpboot: CPU 1 is now offline
>[214030.338741] CPU 1 offline: Remove Rx thread
>[214030.340013] smpboot: CPU 2 is now offline
>[214030.340209] CPU 2 offline: Remove Rx thread
>[214030.340467] Broke affinity for irq 16
>[214030.340471] Broke affinity for irq 41
>[214030.340474] Broke affinity for irq 43
>[214030.340476] Broke affinity for irq 45
>[214030.340481] Broke affinity for irq 49
>[214030.340484] Broke affinity for irq 51
>[214030.341502] smpboot: CPU 3 is now offline
>[214030.341731] CPU 3 offline: Remove Rx thread
>[214030.341837] Extended CMOS year: 2000
>[214030.342697] ACPI: Low-level resume complete
>[214030.342736] PM: Restoring platform NVS memory
>[214030.343200] Extended CMOS year: 2000
>[214030.343779] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
>[214030.343801] Enabling non-boot CPUs ...
>[214030.343890] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[214030.358285] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[214030.358293] bnx2i: CPU 1 online: Create Rx thread
>[214030.358314] CPU1 is up
>[214030.358357] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[214030.372173] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[214030.372176] bnx2i: CPU 2 online: Create Rx thread
>[214030.372194] CPU2 is up
>[214030.372230] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[214030.386082] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[214030.386090] bnx2i: CPU 3 online: Create Rx thread
>[214030.386111] CPU3 is up
>[214030.389552] ACPI: Waking up from system sleep state S3
>[214030.478917] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[214030.484858] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[214030.506857] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[214030.583768] pcieport 0000:00:1c.7: wake-up capability disabled by ACPI
>[214030.583833] PM: noirq resume of devices complete after 148.754 msecs
>[214030.583907] PM: early resume of devices complete after 0.039 msecs
>[214030.583954] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[214030.584012] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[214030.584013] mei 0000:00:16.0: irq 54 for MSI/MSI-X
>[214030.584058] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[214030.584080] e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
>[214030.584083] snd_hda_intel 0000:00:1b.0: irq 57 for MSI/MSI-X
>[214030.584110] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[214030.584117] ahci 0000:00:1f.2: setting latency timer to 64
>[214030.584245] snd_hda_intel 0000:01:00.1: irq 58 for MSI/MSI-X
>[214030.584366] iwlwifi 0000:25:00.0: RF_KILL bit toggled to disable radio.
>[214030.587340] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[214030.587340] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[214030.816272] usb 2-1.4: reset high-speed USB device number 3 using ehci_hcd
>[214030.901059] ata5: SATA link down (SStatus 0 SControl 300)
>[214030.903035] ata6: SATA link down (SStatus 0 SControl 300)
>[214030.907013] ata4: SATA link down (SStatus 0 SControl 300)
>[214031.002848] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[214031.134598] firewire_core 0000:24:00.0: rediscovered device fw0
>[214031.773155] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[214031.773259] radeon 0000:01:00.0: WB enabled
>[214031.773260] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022d078c00
>[214031.789546] [drm] ring test on 0 succeeded in 3 usecs
>[214031.789606] [drm] ib test on ring 0 succeeded in 0 usecs
>[214031.865475] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[214031.868826] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[214031.868835] ata2.00: configured for UDMA/100
>[214031.877436] serial 00:09: activated
>[214031.878112] parport_pc 00:0a: activated
>[214032.099293] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[214032.099293] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[214032.102051] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[214032.102051] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[214033.198743] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[214033.199857] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[214033.201159] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[214033.201309] ata1.00: configured for UDMA/100
>[214033.201393] sd 0:0:0:0: [sda] Starting disk
>[214033.203211] Extended CMOS year: 2000
>[214033.727000] PM: resume of devices complete after 3149.081 msecs
>[214033.727185] PM: Finishing wakeup.
>[214033.728136] usb 1-1.4: USB disconnect, device number 4
>[214033.728140] usb 1-1.4.2: USB disconnect, device number 12
>[214033.728142] usb 1-1.4.2.1: USB disconnect, device number 14
>[214033.727186] Restarting tasks ... done.
>[214033.731292] video LNXVIDEO:00: Restoring backlight state
>[214033.757688] usb 1-1.4.2.4: USB disconnect, device number 15
>[214033.768882] usb 1-1.4.4: USB disconnect, device number 13
>[214033.947685] e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
>[214034.048200] e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
>[214034.048513] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[214060.941354] iwlwifi 0000:25:00.0: RF_KILL bit toggled to enable radio.
>[214060.959721] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
>[214060.959921] iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0
>[214061.245819] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
>[214061.245970] iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0
>[214061.362418] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[214066.979739] wlan0: authenticate with 00:1f:1f:6b:a2:58
>[214067.002406] wlan0: send auth to 00:1f:1f:6b:a2:58 (try 1/3)
>[214067.004297] wlan0: authenticated
>[214067.004617] wlan0: waiting for beacon from 00:1f:1f:6b:a2:58
>[214067.097053] wlan0: associate with 00:1f:1f:6b:a2:58 (try 1/3)
>[214067.102722] wlan0: RX AssocResp from 00:1f:1f:6b:a2:58 (capab=0x411 status=0 aid=4)
>[214067.106923] wlan0: associated
>[214067.107028] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[214071.435096] type=1400 audit(1356113082.925:8): avc:  denied  { open } for  pid=26410 comm="openvpn" path="/home/vagojan/.cert/v.jansa@stk.cz-cert.pem" dev="dm-7" ino=2626537 scontext=system_u:system_r:openvpn_t:s0 tcontext=unconfined_u:object_r:user_home_t:s0 tclass=file
>[214194.506493] wlan0: deauthenticating from 00:1f:1f:6b:a2:58 by local choice (reason=3)
>[214194.558226] cfg80211: Calling CRDA to update world regulatory domain
>[214194.620948] cfg80211: World regulatory domain updated:
>[214194.620952] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[214194.620954] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[214194.620956] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[214194.620957] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[214194.620958] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[214194.620960] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[214194.623571] cfg80211: Calling CRDA for country: CZ
>[214194.625773] cfg80211: Regulatory domain changed to country: CZ
>[214194.625776] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[214194.625778] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[214194.625780] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
>[214194.625781] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[214194.625783] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>[214195.650095] PM: Syncing filesystems ... done.
>[214195.670809] PM: Preparing system for mem sleep
>[214195.769881] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[214195.769882] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[214195.772115] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[214195.772115] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[214195.822681] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[214195.822681] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[214195.856009] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[214195.867900] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[214195.878940] PM: Entering mem sleep
>[214195.879028] Suspending console(s) (use no_console_suspend to debug)
>[214195.879335] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[214195.893165] sd 0:0:0:0: [sda] Stopping disk
>[214195.939740] parport_pc 00:0a: disabled
>[214195.939928] serial 00:09: disabled
>[214195.940229] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[214195.940273] ACPI handle has no context!
>[214195.992145] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[214196.156671] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[214196.608360] PM: suspend of devices complete after 730.616 msecs
>[214196.608502] PM: late suspend of devices complete after 0.140 msecs
>[214196.608633] pcieport 0000:00:1c.7: wake-up capability enabled by ACPI
>[214196.630414] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[214196.641486] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[214196.663269] PM: noirq suspend of devices complete after 54.868 msecs
>[214196.663935] ACPI: Preparing to enter system sleep state S3
>[214196.669330] PM: Saving platform NVS memory
>[214196.672508] Disabling non-boot CPUs ...
>[214196.673964] smpboot: CPU 1 is now offline
>[214196.674207] CPU 1 offline: Remove Rx thread
>[214196.675486] smpboot: CPU 2 is now offline
>[214196.675657] CPU 2 offline: Remove Rx thread
>[214196.675938] Broke affinity for irq 16
>[214196.675942] Broke affinity for irq 41
>[214196.675945] Broke affinity for irq 43
>[214196.675947] Broke affinity for irq 45
>[214196.675952] Broke affinity for irq 49
>[214196.675955] Broke affinity for irq 51
>[214196.676973] smpboot: CPU 3 is now offline
>[214196.677187] CPU 3 offline: Remove Rx thread
>[214196.677309] Extended CMOS year: 2000
>[214196.678171] ACPI: Low-level resume complete
>[214196.678210] PM: Restoring platform NVS memory
>[214196.678674] Extended CMOS year: 2000
>[214196.679258] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
>[214196.679280] Enabling non-boot CPUs ...
>[214196.679366] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[214196.693774] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[214196.693777] bnx2i: CPU 1 online: Create Rx thread
>[214196.693798] CPU1 is up
>[214196.693842] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[214196.707678] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[214196.707681] bnx2i: CPU 2 online: Create Rx thread
>[214196.707701] CPU2 is up
>[214196.707735] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[214196.721536] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[214196.721539] bnx2i: CPU 3 online: Create Rx thread
>[214196.721556] CPU3 is up
>[214196.725038] ACPI: Waking up from system sleep state S3
>[214196.807369] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[214196.815299] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[214196.837299] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[214196.914207] pcieport 0000:00:1c.7: wake-up capability disabled by ACPI
>[214196.914270] PM: noirq resume of devices complete after 150.722 msecs
>[214196.914345] PM: early resume of devices complete after 0.036 msecs
>[214196.914392] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[214196.914409] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[214196.914448] mei 0000:00:16.0: irq 54 for MSI/MSI-X
>[214196.914456] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[214196.914495] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
>[214196.914508] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[214196.914531] ahci 0000:00:1f.2: setting latency timer to 64
>[214196.914552] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[214196.914723] snd_hda_intel 0000:01:00.1: irq 58 for MSI/MSI-X
>[214196.917501] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[214196.917502] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[214197.094120] serial 00:09: activated
>[214197.095017] parport_pc 00:0a: activated
>[214197.145780] usb 2-1.4: reset high-speed USB device number 3 using ehci_hcd
>[214197.243461] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[214197.245448] ata6: SATA link down (SStatus 0 SControl 300)
>[214197.246260] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[214197.247435] ata4: SATA link down (SStatus 0 SControl 300)
>[214197.249300] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[214197.249302] ata2.00: configured for UDMA/100
>[214197.249439] ata5: SATA link down (SStatus 0 SControl 300)
>[214197.465048] firewire_core 0000:24:00.0: rediscovered device fw0
>[214198.102766] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[214198.102875] radeon 0000:01:00.0: WB enabled
>[214198.102877] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022d078c00
>[214198.119196] [drm] ring test on 0 succeeded in 3 usecs
>[214198.119255] [drm] ib test on ring 0 succeeded in 0 usecs
>[214198.429649] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[214198.429650] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[214198.432398] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[214198.432398] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[214199.481267] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[214199.482431] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[214199.483807] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[214199.483955] ata1.00: configured for UDMA/100
>[214199.484119] sd 0:0:0:0: [sda] Starting disk
>[214199.485903] Extended CMOS year: 2000
>[214200.137237] PM: resume of devices complete after 3229.031 msecs
>[214200.137413] PM: Finishing wakeup.
>[214200.137414] Restarting tasks ... done.
>[214200.141062] video LNXVIDEO:00: Restoring backlight state
>[214200.324990] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[214200.425516] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[214200.425732] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[214200.427674] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
>[214200.427817] iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0
>[214200.550054] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[214205.914539] wlan0: authenticate with 00:1f:1f:6b:a2:58
>[214205.923298] wlan0: send auth to 00:1f:1f:6b:a2:58 (try 1/3)
>[214205.929163] wlan0: authenticated
>[214205.929888] wlan0: associate with 00:1f:1f:6b:a2:58 (try 1/3)
>[214205.934963] wlan0: RX AssocResp from 00:1f:1f:6b:a2:58 (capab=0x411 status=0 aid=3)
>[214205.938344] wlan0: associated
>[214205.938394] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[214216.694287] type=1400 audit(1356123098.797:9): avc:  denied  { open } for  pid=26904 comm="openvpn" path="/home/vagojan/.cert/v.jansa@stk.cz-cert.pem" dev="dm-7" ino=2626537 scontext=system_u:system_r:openvpn_t:s0 tcontext=unconfined_u:object_r:user_home_t:s0 tclass=file
>[220097.764716] usb 1-1.4: new high-speed USB device number 16 using ehci_hcd
>[220097.850037] usb 1-1.4: New USB device found, idVendor=0424, idProduct=2514
>[220097.850047] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[220097.852244] hub 1-1.4:1.0: USB hub found
>[220097.852327] hub 1-1.4:1.0: 4 ports detected
>[220098.125833] usb 1-1.4.2: new full-speed USB device number 17 using ehci_hcd
>[220098.211404] usb 1-1.4.2: New USB device found, idVendor=0557, idProduct=7000
>[220098.211414] usb 1-1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[220098.212239] hub 1-1.4.2:1.0: USB hub found
>[220098.212396] hub 1-1.4.2:1.0: 4 ports detected
>[220098.286714] usb 1-1.4.4: new low-speed USB device number 18 using ehci_hcd
>[220098.386959] usb 1-1.4.4: New USB device found, idVendor=04d9, idProduct=2519
>[220098.386969] usb 1-1.4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[220098.386974] usb 1-1.4.4: Product: VISENTA V1 
>[220098.400336] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/input/input31
>[220098.400966] hid-generic 0003:04D9:2519.0011: input,hidraw0: USB HID v1.10 Keyboard [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input0
>[220098.416310] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/input/input32
>[220098.417223] hid-generic 0003:04D9:2519.0012: input,hidraw1: USB HID v1.10 Mouse [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input1
>[220098.479138] usb 1-1.4.2.1: new low-speed USB device number 19 using ehci_hcd
>[220098.599685] usb 1-1.4.2.1: New USB device found, idVendor=1c4f, idProduct=0002
>[220098.599688] usb 1-1.4.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[220098.599690] usb 1-1.4.2.1: Product: USB Keykoard
>[220098.599691] usb 1-1.4.2.1: Manufacturer: USB
>[220098.611968] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.1/1-1.4.2.1:1.0/input/input33
>[220098.612435] hid-generic 0003:1C4F:0002.0013: input,hidraw2: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.4.2.1/input0
>[220098.625541] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.1/1-1.4.2.1:1.1/input/input34
>[220098.625920] hid-generic 0003:1C4F:0002.0014: input,hidraw3: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.4.2.1/input1
>[220098.687739] usb 1-1.4.2.4: new low-speed USB device number 20 using ehci_hcd
>[220098.768599] usb 1-1.4.2.4: New USB device found, idVendor=046d, idProduct=c046
>[220098.768611] usb 1-1.4.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[220098.768619] usb 1-1.4.2.4: Product: USB Optical Mouse
>[220098.768626] usb 1-1.4.2.4: Manufacturer: Logitech
>[220098.773853] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.4/1-1.4.2.4:1.0/input/input35
>[220098.774486] hid-generic 0003:046D:C046.0015: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.4.2.4/input0
>[220100.374134] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[220100.374193] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[220101.805549] hp_wmi: Unknown event_id - 8 - 0x1
>[263704.098167] gnome-shell[6012]: segfault at ffffffff ip 0000003175260efc sp 00007fff00b82fc0 error 4 in libglib-2.0.so.0.3200.4[3175200000+11d000]
>[304971.175564] wlan0: deauthenticated from 00:1f:1f:6b:a2:58 (Reason: 6)
>[304971.206381] cfg80211: Calling CRDA to update world regulatory domain
>[304971.221627] cfg80211: World regulatory domain updated:
>[304971.221634] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[304971.221640] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[304971.221644] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[304971.221648] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[304971.221652] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[304971.221656] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[304971.221693] cfg80211: Calling CRDA for country: CZ
>[304971.227291] cfg80211: Regulatory domain changed to country: CZ
>[304971.227298] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[304971.227303] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[304971.227307] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
>[304971.227311] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[304971.227314] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>[304973.961762] wlan0: authenticate with 00:1f:1f:6b:a2:58
>[304973.963853] wlan0: send auth to 00:1f:1f:6b:a2:58 (try 1/3)
>[304973.973868] wlan0: authenticated
>[304973.974854] wlan0: associate with 00:1f:1f:6b:a2:58 (try 1/3)
>[304973.993339] wlan0: RX AssocResp from 00:1f:1f:6b:a2:58 (capab=0x411 status=0 aid=2)
>[304973.998723] wlan0: associated
>[304977.233016] wlan0: deauthenticated from 00:1f:1f:6b:a2:58 (Reason: 15)
>[304977.250432] cfg80211: Calling CRDA to update world regulatory domain
>[304977.255108] cfg80211: World regulatory domain updated:
>[304977.255115] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[304977.255120] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[304977.255124] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[304977.255128] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[304977.255132] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[304977.255136] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[304977.255171] cfg80211: Calling CRDA for country: CZ
>[304977.259666] cfg80211: Regulatory domain changed to country: CZ
>[304977.259672] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[304977.259677] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[304977.259681] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
>[304977.259685] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[304977.259689] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>[304980.148588] wlan0: authenticate with 00:1f:1f:6b:a2:58
>[304980.153097] wlan0: send auth to 00:1f:1f:6b:a2:58 (try 1/3)
>[304980.173692] wlan0: authenticated
>[304980.175063] wlan0: associate with 00:1f:1f:6b:a2:58 (try 1/3)
>[304980.186074] wlan0: RX AssocResp from 00:1f:1f:6b:a2:58 (capab=0x411 status=0 aid=2)
>[304980.191812] wlan0: associated
>[304983.455533] wlan0: deauthenticated from 00:1f:1f:6b:a2:58 (Reason: 15)
>[304983.463641] cfg80211: Calling CRDA to update world regulatory domain
>[304983.468575] cfg80211: World regulatory domain updated:
>[304983.468581] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[304983.468587] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[304983.468591] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[304983.468595] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[304983.468598] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[304983.468602] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[304983.468635] cfg80211: Calling CRDA for country: CZ
>[304983.473177] cfg80211: Regulatory domain changed to country: CZ
>[304983.473183] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[304983.473188] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[304983.473193] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
>[304983.473197] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[304983.473200] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>[304986.194899] wlan0: authenticate with 00:1f:1f:6b:a2:58
>[304986.196480] wlan0: send auth to 00:1f:1f:6b:a2:58 (try 1/3)
>[304986.210167] wlan0: authenticated
>[304986.211561] wlan0: associate with 00:1f:1f:6b:a2:58 (try 1/3)
>[304986.225890] wlan0: RX AssocResp from 00:1f:1f:6b:a2:58 (capab=0x411 status=0 aid=2)
>[304986.233512] wlan0: associated
>[304987.876222] wlan0: deauthenticating from 00:1f:1f:6b:a2:58 by local choice (reason=3)
>[304987.899552] cfg80211: Calling CRDA to update world regulatory domain
>[304987.905899] cfg80211: World regulatory domain updated:
>[304987.905903] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[304987.905905] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[304987.905906] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[304987.905908] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[304987.905909] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[304987.905910] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[304987.905927] cfg80211: Calling CRDA for country: CZ
>[304987.907705] cfg80211: Regulatory domain changed to country: CZ
>[304987.907707] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[304987.907708] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[304987.907710] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
>[304987.907711] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[304987.907712] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>[304992.336251] wlan0: authenticate with 00:1f:1f:6b:a2:58
>[304992.339248] wlan0: send auth to 00:1f:1f:6b:a2:58 (try 1/3)
>[304992.341027] wlan0: authenticated
>[304992.341842] wlan0: associate with 00:1f:1f:6b:a2:58 (try 1/3)
>[304992.345713] wlan0: RX AssocResp from 00:1f:1f:6b:a2:58 (capab=0x411 status=0 aid=2)
>[304992.349742] wlan0: associated
>[430605.416114] usb 1-1.4.4: USB disconnect, device number 18
>[558614.680636] mmc0: new SDHC card at address e624
>[558614.681196] mmcblk0: mmc0:e624 SD16G 14.8 GiB 
>[558614.690817]  mmcblk0: p1
>[558629.690699] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
>[559348.639903] xhci_hcd 0000:26:00.0: Timeout while waiting for address device command
>[559353.831124] xhci_hcd 0000:26:00.0: Timeout while waiting for address device command
>[559354.033735] usb 4-2: device not accepting address 7, error -62
>[559354.034072] xhci_hcd 0000:26:00.0: Bad Slot ID 5
>[559354.034081] xhci_hcd 0000:26:00.0: Could not allocate xHCI USB device data structures
>[559354.034092] hub 4-0:1.0: couldn't allocate port 2 usb_device
>[559373.684288] xhci_hcd 0000:26:00.0: Timeout while waiting for address device command
>[559378.875315] xhci_hcd 0000:26:00.0: Timeout while waiting for address device command
>[559379.079016] usb 4-2: device not accepting address 8, error -62
>[559379.079350] xhci_hcd 0000:26:00.0: Bad Slot ID 6
>[559379.079359] xhci_hcd 0000:26:00.0: Could not allocate xHCI USB device data structures
>[559379.079370] hub 4-0:1.0: couldn't allocate port 2 usb_device
>[559398.106778] hub 3-0:1.0: unable to enumerate USB device on port 1
>[559398.312633] usb 4-1: new SuperSpeed USB device number 9 using xhci_hcd
>[559398.324973] usb 4-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
>[559398.327728] usb 4-1: New USB device found, idVendor=0bc2, idProduct=2332
>[559398.327737] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[559398.327742] usb 4-1: Product: Portable
>[559398.327747] usb 4-1: Manufacturer: Seagate
>[559398.327752] usb 4-1: SerialNumber: 2GHH9B9X
>[559398.331765] scsi8 : usb-storage 4-1:1.0
>[559399.333454] scsi 8:0:0:0: Direct-Access     Seagate  Portable         SF06 PQ: 0 ANSI: 4
>[559399.335826] sd 8:0:0:0: [sdb] 1953525164 512-byte logical blocks: (1.00 TB/931 GiB)
>[559399.336195] sd 8:0:0:0: [sdb] Write Protect is off
>[559399.336204] sd 8:0:0:0: [sdb] Mode Sense: bf 00 00 00
>[559399.336629] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[559399.336938] sd 8:0:0:0: Attached scsi generic sg2 type 0
>[559399.358600]  sdb: sdb1
>[559399.360337] sd 8:0:0:0: [sdb] Attached SCSI disk
>[559401.535384] SELinux: initialized (dev sdb1, type fuseblk), uses genfs_contexts
>[560519.023003] type=1400 audit(1356470060.624:10): avc:  denied  { open } for  pid=20526 comm="openvpn" path="/home/vagojan/.cert/v.jansa@stk.cz-cert.pem" dev="dm-7" ino=2626537 scontext=system_u:system_r:openvpn_t:s0 tcontext=unconfined_u:object_r:user_home_t:s0 tclass=file
>[601030.320806] usb 1-1.4.4: new low-speed USB device number 21 using ehci_hcd
>[601030.422001] usb 1-1.4.4: New USB device found, idVendor=04d9, idProduct=2519
>[601030.422011] usb 1-1.4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[601030.422017] usb 1-1.4.4: Product: VISENTA V1 
>[601030.436410] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/input/input36
>[601030.437035] hid-generic 0003:04D9:2519.0016: input,hidraw0: USB HID v1.10 Keyboard [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input0
>[601030.452524] input: VISENTA V1  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/input/input37
>[601030.452995] hid-generic 0003:04D9:2519.0017: input,hidraw1: USB HID v1.10 Mouse [VISENTA V1 ] on usb-0000:00:1a.0-1.4.4/input1
>[601203.896499] usb 1-1.4.4: USB disconnect, device number 21
>[601206.107614] usb 3-2: new low-speed USB device number 4 using xhci_hcd
>[601206.200041] usb 3-2: New USB device found, idVendor=04d9, idProduct=2519
>[601206.200051] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[601206.200057] usb 3-2: Product: VISENTA V1 
>[601206.200568] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[601206.200595] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
>[601206.267624] input: VISENTA V1  as /devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb3/3-2/3-2:1.0/input/input38
>[601206.267941] hid-generic 0003:04D9:2519.0018: input,hidraw0: USB HID v1.10 Keyboard [VISENTA V1 ] on usb-0000:26:00.0-2/input0
>[601206.351522] input: VISENTA V1  as /devices/pci0000:00/0000:00:1c.7/0000:26:00.0/usb3/3-2/3-2:1.1/input/input39
>[601206.352408] hid-generic 0003:04D9:2519.0019: input,hidraw1: USB HID v1.10 Mouse [VISENTA V1 ] on usb-0000:26:00.0-2/input1
>[601227.766326] usb 3-2: USB disconnect, device number 4
>[612617.647350] wlan0: deauthenticating from 00:1f:1f:6b:a2:58 by local choice (reason=3)
>[612617.682278] cfg80211: Calling CRDA to update world regulatory domain
>[612617.893103] iwlwifi 0000:25:00.0: RF_KILL bit toggled to disable radio.
>[612617.939266] cfg80211: World regulatory domain updated:
>[612617.939270] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[612617.939272] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[612617.939274] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[612617.939276] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[612617.939278] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[612617.939279] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[612617.939293] cfg80211: Calling CRDA for country: CZ
>[612617.940918] cfg80211: Regulatory domain changed to country: CZ
>[612617.940920] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[612617.940921] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[612617.940923] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
>[612617.940924] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[612617.940925] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>[627615.146059] traps: java[27059] trap int3 ip:317524e991 sp:7f989e3a4a70 error:0
>[703362.328035] mmc0: card e624 removed
>[717342.771958] usb 4-1: USB disconnect, device number 9
>[717368.054610] hid-generic 0003:1C4F:0002.0013: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[717368.056211] hid-generic 0003:046D:C046.0015: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[717368.058666] usb 1-1.4: clear tt 2 (0130) error -71
>[717368.062935] hid-generic 0003:1C4F:0002.0014: can't reset device, 0000:00:1a.0-1.4.2.1/input1, status -71
>[717368.063046] usb 1-1.4: clear tt 2 (0140) error -71
>[717368.067376] usb 1-1.4: clear tt 2 (0130) error -71
>[717368.071612] hid-generic 0003:046D:C046.0015: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[717368.071707] hid-generic 0003:1C4F:0002.0013: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[717368.076379] usb 1-1.4: clear tt 2 (0140) error -71
>[717368.080498] usb 1-1.4: clear tt 2 (0130) error -71
>[717368.084817] hid-generic 0003:1C4F:0002.0014: can't reset device, 0000:00:1a.0-1.4.2.1/input1, status -71
>[717368.087454] hid-generic 0003:046D:C046.0015: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[717368.088848] usb 1-1.4: clear tt 2 (0130) error -71
>[717368.093059] hid-generic 0003:1C4F:0002.0013: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[717368.093061] usb 1-1.4: clear tt 2 (0140) error -71
>[717368.097734] usb 1-1.4: clear tt 2 (0130) error -71
>[717368.101703] hid-generic 0003:1C4F:0002.0014: can't reset device, 0000:00:1a.0-1.4.2.1/input1, status -71
>[717368.103114] hid-generic 0003:046D:C046.0015: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[717368.106067] usb 1-1.4: clear tt 2 (0130) error -71
>[717368.110267] hid-generic 0003:1C4F:0002.0013: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[717368.110270] usb 1-1.4: clear tt 2 (0140) error -71
>[717368.114209] usb 1-1.4: clear tt 2 (0130) error -71
>[717368.114767] hid-generic 0003:046D:C046.0015: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[717368.118719] hid-generic 0003:1C4F:0002.0014: can't reset device, 0000:00:1a.0-1.4.2.1/input1, status -71
>[717368.118802] usb 1-1.4: clear tt 2 (0140) error -71
>[717368.121293] usb 1-1.4: USB disconnect, device number 16
>[717368.121299] usb 1-1.4.2: USB disconnect, device number 17
>[717368.121304] usb 1-1.4.2.1: USB disconnect, device number 19
>[717368.123416] usb 1-1.4: clear tt 2 (0130) error -71
>[717368.127705] hid-generic 0003:1C4F:0002.0013: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[717368.127708] usb 1-1.4: clear tt 2 (0130) error -19
>[717368.158626] usb 1-1.4.2.4: USB disconnect, device number 20
>[717369.798281] PM: Syncing filesystems ... done.
>[717370.383523] PM: Preparing system for mem sleep
>[717370.958939] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[717370.958939] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[717370.961206] [drm:radeon_dp_link_train_cr] *ERROR* displayport link status failed
>[717370.961207] [drm:radeon_dp_link_train_cr] *ERROR* clock recovery failed
>[717371.725387] Freezing user space processes ... (elapsed 0.13 seconds) done.
>[717371.857662] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[717371.868656] PM: Entering mem sleep
>[717371.868742] Suspending console(s) (use no_console_suspend to debug)
>[717371.869930] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[717371.870030] sd 0:0:0:0: [sda] Stopping disk
>[717371.929969] parport_pc 00:0a: disabled
>[717371.930163] serial 00:09: disabled
>[717371.930571] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[717371.931313] ACPI handle has no context!
>[717371.982459] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[717372.148357] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[717372.870637] PM: suspend of devices complete after 1003.706 msecs
>[717372.870756] PM: late suspend of devices complete after 0.117 msecs
>[717372.870911] pcieport 0000:00:1c.7: wake-up capability enabled by ACPI
>[717372.892624] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[717372.903701] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[717372.925477] PM: noirq suspend of devices complete after 54.821 msecs
>[717372.926144] ACPI: Preparing to enter system sleep state S3
>[717372.931550] PM: Saving platform NVS memory
>[717372.935008] Disabling non-boot CPUs ...
>[717372.936482] smpboot: CPU 1 is now offline
>[717372.936757] CPU 1 offline: Remove Rx thread
>[717372.938049] smpboot: CPU 2 is now offline
>[717372.938289] CPU 2 offline: Remove Rx thread
>[717372.938531] Broke affinity for irq 16
>[717372.938535] Broke affinity for irq 41
>[717372.938538] Broke affinity for irq 43
>[717372.938540] Broke affinity for irq 45
>[717372.938545] Broke affinity for irq 49
>[717372.938548] Broke affinity for irq 51
>[717372.939567] smpboot: CPU 3 is now offline
>[717372.939774] CPU 3 offline: Remove Rx thread
>[717372.939896] Extended CMOS year: 2000
>[717372.940759] ACPI: Low-level resume complete
>[717372.940797] PM: Restoring platform NVS memory
>[717372.941256] Extended CMOS year: 2000
>[717372.941834] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
>[717372.941848] Enabling non-boot CPUs ...
>[717372.941955] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[717372.956330] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[717372.956333] bnx2i: CPU 1 online: Create Rx thread
>[717372.956354] CPU1 is up
>[717372.956398] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[717372.970207] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[717372.970211] bnx2i: CPU 2 online: Create Rx thread
>[717372.970228] CPU2 is up
>[717372.970267] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[717372.984090] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[717372.984093] bnx2i: CPU 3 online: Create Rx thread
>[717372.984112] CPU3 is up
>[717372.987690] ACPI: Waking up from system sleep state S3
>[717373.076559] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[717373.084495] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[717373.106495] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[717373.183407] pcieport 0000:00:1c.7: wake-up capability disabled by ACPI
>[717373.183470] PM: noirq resume of devices complete after 150.718 msecs
>[717373.183541] PM: early resume of devices complete after 0.036 msecs
>[717373.183578] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[717373.183594] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[717373.183623] mei 0000:00:16.0: irq 54 for MSI/MSI-X
>[717373.183662] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[717373.183700] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
>[717373.183709] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[717373.183710] ahci 0000:00:1f.2: setting latency timer to 64
>[717373.183727] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[717373.183861] iwlwifi 0000:25:00.0: RF_KILL bit toggled to disable radio.
>[717373.183886] snd_hda_intel 0000:01:00.1: irq 58 for MSI/MSI-X
>[717373.186898] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[717373.186899] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[717373.364678] serial 00:09: activated
>[717373.365910] parport_pc 00:0a: activated
>[717373.414862] usb 2-1.4: reset high-speed USB device number 3 using ehci_hcd
>[717373.510659] ata4: SATA link down (SStatus 0 SControl 300)
>[717373.514645] ata6: SATA link down (SStatus 0 SControl 300)
>[717373.516647] ata5: SATA link down (SStatus 0 SControl 300)
>[717373.614446] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[717373.617736] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[717373.621291] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[717373.621294] ata2.00: configured for UDMA/100
>[717373.734213] firewire_core 0000:24:00.0: rediscovered device fw0
>[717374.374073] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[717374.374178] radeon 0000:01:00.0: WB enabled
>[717374.374179] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022d078c00
>[717374.390499] [drm] ring test on 0 succeeded in 3 usecs
>[717374.390559] [drm] ib test on ring 0 succeeded in 0 usecs
>[717375.801370] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[717375.802495] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[717375.803874] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[717375.804023] ata1.00: configured for UDMA/100
>[717375.804115] sd 0:0:0:0: [sda] Starting disk
>[717375.888432] PM: resume of devices complete after 2710.043 msecs
>[717375.888535] PM: Finishing wakeup.
>[717375.888536] Restarting tasks ... done.
>[717375.947702] video LNXVIDEO:00: Restoring backlight state
>[717377.220384] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[717377.320549] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[717377.320817] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[717408.963737] iwlwifi 0000:25:00.0: RF_KILL bit toggled to enable radio.
>[717408.982132] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
>[717408.982276] iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0
>[717409.103239] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[717414.781243] wlan0: authenticate with 00:1f:1f:6b:a2:58
>[717414.787616] wlan0: send auth to 00:1f:1f:6b:a2:58 (try 1/3)
>[717414.789385] wlan0: authenticated
>[717414.789984] wlan0: associate with 00:1f:1f:6b:a2:58 (try 1/3)
>[717414.793903] wlan0: RX AssocResp from 00:1f:1f:6b:a2:58 (capab=0x411 status=0 aid=3)
>[717414.799495] wlan0: associated
>[717414.799557] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[731648.117749] usb 1-1.4: new high-speed USB device number 22 using ehci_hcd
>[731648.202806] usb 1-1.4: New USB device found, idVendor=0424, idProduct=2514
>[731648.202816] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[731648.204742] hub 1-1.4:1.0: USB hub found
>[731648.204914] hub 1-1.4:1.0: 4 ports detected
>[731648.478121] usb 1-1.4.2: new full-speed USB device number 23 using ehci_hcd
>[731648.563520] usb 1-1.4.2: New USB device found, idVendor=0557, idProduct=7000
>[731648.563523] usb 1-1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[731648.563896] hub 1-1.4.2:1.0: USB hub found
>[731648.564094] hub 1-1.4.2:1.0: 4 ports detected
>[731648.837570] usb 1-1.4.2.1: new low-speed USB device number 24 using ehci_hcd
>[731648.947965] usb 1-1.4.2.1: New USB device found, idVendor=1c4f, idProduct=0002
>[731648.947974] usb 1-1.4.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[731648.947980] usb 1-1.4.2.1: Product: USB Keykoard
>[731648.947985] usb 1-1.4.2.1: Manufacturer: USB
>[731648.961713] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.1/1-1.4.2.1:1.0/input/input40
>[731648.962742] hid-generic 0003:1C4F:0002.001A: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.4.2.1/input0
>[731650.651458] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[731650.651586] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[731673.914702] usbhid 1-1.4.2.1:1.1: can't add hid device: -110
>[731673.914741] usbhid: probe of 1-1.4.2.1:1.1 failed with error -110
>[731673.988535] usb 1-1.4.2.4: new low-speed USB device number 25 using ehci_hcd
>[731674.069963] usb 1-1.4.2.4: New USB device found, idVendor=046d, idProduct=c046
>[731674.069966] usb 1-1.4.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[731674.069968] usb 1-1.4.2.4: Product: USB Optical Mouse
>[731674.069969] usb 1-1.4.2.4: Manufacturer: Logitech
>[731674.074649] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.4/1-1.4.2.4:1.0/input/input41
>[731674.075223] hid-generic 0003:046D:C046.001B: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.4.2.4/input0
>[774475.388168] hid-generic 0003:1C4F:0002.001A: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774475.390336] hid-generic 0003:046D:C046.001B: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774475.392132] usb 1-1.4: clear tt 2 (0180) error -71
>[774475.396231] usb 1-1.4: clear tt 2 (0190) error -71
>[774475.403994] hid-generic 0003:1C4F:0002.001A: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774475.405255] hid-generic 0003:046D:C046.001B: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774475.407961] usb 1-1.4: clear tt 2 (0180) error -71
>[774475.412206] usb 1-1.4: clear tt 2 (0190) error -71
>[774475.412230] hid-generic 0003:1C4F:0002.001A: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774475.416336] usb 1-1.4: clear tt 2 (0180) error -71
>[774475.420985] hid-generic 0003:046D:C046.001B: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774475.424934] usb 1-1.4: clear tt 2 (0190) error -71
>[774475.427834] hid-generic 0003:1C4F:0002.001A: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774475.429204] hid-generic 0003:046D:C046.001B: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774475.431788] usb 1-1.4: clear tt 2 (0180) error -71
>[774475.436680] usb 1-1.4: clear tt 2 (0190) error -71
>[774475.444101] hid-generic 0003:1C4F:0002.001A: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774475.444807] hid-generic 0003:046D:C046.001B: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774475.448133] usb 1-1.4: clear tt 2 (0180) error -71
>[774475.452251] usb 1-1.4: clear tt 2 (0190) error -71
>[774475.460064] hid-generic 0003:1C4F:0002.001A: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774475.460772] hid-generic 0003:046D:C046.001B: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774475.464089] usb 1-1.4: clear tt 2 (0180) error -71
>[774475.468233] usb 1-1.4: clear tt 2 (0190) error -71
>[774475.475888] hid-generic 0003:1C4F:0002.001A: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774475.476769] hid-generic 0003:046D:C046.001B: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774475.479961] usb 1-1.4: clear tt 2 (0180) error -71
>[774475.484073] usb 1-1.4: clear tt 2 (0190) error -71
>[774475.492807] hid-generic 0003:046D:C046.001B: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774475.492819] hid-generic 0003:1C4F:0002.001A: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774475.496798] usb 1-1.4: clear tt 2 (0190) error -71
>[774475.500900] usb 1-1.4: clear tt 2 (0180) error -71
>[774475.501068] hid-generic 0003:046D:C046.001B: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774475.505024] usb 1-1.4: clear tt 2 (0190) error -71
>[774475.507704] hid-generic 0003:1C4F:0002.001A: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774475.511769] usb 1-1.4: clear tt 2 (0180) error -71
>[774475.516168] hid-generic 0003:1C4F:0002.001A: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774475.516666] hid-generic 0003:046D:C046.001B: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774475.520110] usb 1-1.4: clear tt 2 (0180) error -71
>[774475.524152] hid-generic 0003:1C4F:0002.001A: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774475.524238] usb 1-1.4: clear tt 2 (0190) error -71
>[774475.528352] usb 1-1.4: clear tt 2 (0180) error -71
>[774475.528981] usb 1-1.4: USB disconnect, device number 22
>[774475.528988] usb 1-1.4.2: USB disconnect, device number 23
>[774475.528993] usb 1-1.4.2.1: USB disconnect, device number 24
>[774475.532733] hid-generic 0003:046D:C046.001B: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774475.532742] usb 1-1.4: clear tt 2 (0190) error -19
>[774475.549724] usb 1-1.4.2.4: USB disconnect, device number 25
>[774475.613811] e1000e: eth0 NIC Link is Down
>[774475.746342] usb 1-1.4: new high-speed USB device number 26 using ehci_hcd
>[774475.831316] usb 1-1.4: New USB device found, idVendor=0424, idProduct=2514
>[774475.831321] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[774475.832083] hub 1-1.4:1.0: USB hub found
>[774475.832146] hub 1-1.4:1.0: 4 ports detected
>[774476.105541] usb 1-1.4.2: new full-speed USB device number 27 using ehci_hcd
>[774476.190981] usb 1-1.4.2: New USB device found, idVendor=0557, idProduct=7000
>[774476.190988] usb 1-1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[774476.191369] hub 1-1.4.2:1.0: USB hub found
>[774476.191605] hub 1-1.4.2:1.0: 4 ports detected
>[774476.454057] usb 1-1.4.2.1: new low-speed USB device number 28 using ehci_hcd
>[774476.564725] usb 1-1.4.2.1: New USB device found, idVendor=1c4f, idProduct=0002
>[774476.564735] usb 1-1.4.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[774476.564740] usb 1-1.4.2.1: Product: USB Keykoard
>[774476.564745] usb 1-1.4.2.1: Manufacturer: USB
>[774476.577110] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.1/1-1.4.2.1:1.0/input/input42
>[774476.577344] hid-generic 0003:1C4F:0002.001C: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.4.2.1/input0
>[774476.590015] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.1/1-1.4.2.1:1.1/input/input43
>[774476.590241] hid-generic 0003:1C4F:0002.001D: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.4.2.1/input1
>[774476.652670] usb 1-1.4.2.4: new low-speed USB device number 29 using ehci_hcd
>[774476.733840] usb 1-1.4.2.4: New USB device found, idVendor=046d, idProduct=c046
>[774476.733849] usb 1-1.4.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[774476.733855] usb 1-1.4.2.4: Product: USB Optical Mouse
>[774476.733860] usb 1-1.4.2.4: Manufacturer: Logitech
>[774476.738139] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.4/1-1.4.2.4:1.0/input/input44
>[774476.738717] hid-generic 0003:046D:C046.001E: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.4.2.4/input0
>[774479.200230] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[774479.305345] hid-generic 0003:1C4F:0002.001C: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774479.307928] hid-generic 0003:046D:C046.001E: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774479.310294] usb 1-1.4: clear tt 2 (01c0) error -71
>[774479.315606] usb 1-1.4: clear tt 2 (01d0) error -71
>[774479.315664] hid-generic 0003:1C4F:0002.001D: can't reset device, 0000:00:1a.0-1.4.2.1/input1, status -71
>[774479.319708] usb 1-1.4: clear tt 2 (01c0) error -71
>[774479.323658] hid-generic 0003:046D:C046.001E: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774479.325054] hid-generic 0003:1C4F:0002.001C: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774479.328223] usb 1-1.4: clear tt 2 (01d0) error -71
>[774479.333564] usb 1-1.4: clear tt 2 (01c0) error -71
>[774479.339178] hid-generic 0003:1C4F:0002.001D: can't reset device, 0000:00:1a.0-1.4.2.1/input1, status -71
>[774479.339245] hid-generic 0003:046D:C046.001E: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774479.344202] usb 1-1.4: clear tt 2 (01c0) error -71
>[774479.348484] usb 1-1.4: clear tt 2 (01d0) error -71
>[774479.348803] hid-generic 0003:1C4F:0002.001C: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[774479.353976] usb 1-1.4: clear tt 2 (01c0) error -71
>[774479.355546] hid-generic 0003:046D:C046.001E: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[774479.358039] hid-generic 0003:1C4F:0002.001D: can't reset device, 0000:00:1a.0-1.4.2.1/input1, status -71
>[774479.359515] usb 1-1.4: clear tt 2 (01d0) error -71
>[774479.361621] usb 1-1.4: USB disconnect, device number 26
>[774479.361628] usb 1-1.4.2: USB disconnect, device number 27
>[774479.361634] usb 1-1.4.2.1: USB disconnect, device number 28
>[774479.364518] usb 1-1.4: clear tt 2 (01c0) error -71
>[774479.407555] usb 1-1.4.2.4: USB disconnect, device number 29
>[774479.651132] e1000e: eth0 NIC Link is Down
>[774549.269162] wlan0: deauthenticating from 00:1f:1f:6b:a2:58 by local choice (reason=3)
>[774549.306147] cfg80211: Calling CRDA to update world regulatory domain
>[774550.238346] cfg80211: World regulatory domain updated:
>[774550.238350] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[774550.238354] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[774550.238356] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[774550.238358] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[774550.238361] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[774550.238363] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[774550.238377] cfg80211: Calling CRDA for country: CZ
>[774550.240748] cfg80211: Regulatory domain changed to country: CZ
>[774550.240750] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[774550.240752] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[774550.240753] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
>[774550.240754] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[774550.240755] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>[774553.784818] PM: Syncing filesystems ... done.
>[774554.319370] PM: Preparing system for mem sleep
>[774556.434756] Freezing user space processes ... (elapsed 0.12 seconds) done.
>[774556.556335] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[774556.567385] PM: Entering mem sleep
>[774556.567470] Suspending console(s) (use no_console_suspend to debug)
>[774556.568372] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[774556.581312] sd 0:0:0:0: [sda] Stopping disk
>[774556.627943] parport_pc 00:0a: disabled
>[774556.628146] serial 00:09: disabled
>[774556.628530] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[774556.628633] ACPI handle has no context!
>[774556.680477] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[774556.845413] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[774557.876805] PM: suspend of devices complete after 1311.730 msecs
>[774557.876921] PM: late suspend of devices complete after 0.114 msecs
>[774557.877071] pcieport 0000:00:1c.7: wake-up capability enabled by ACPI
>[774557.898795] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[774557.909864] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[774557.931645] PM: noirq suspend of devices complete after 54.824 msecs
>[774557.932312] ACPI: Preparing to enter system sleep state S3
>[774557.937726] PM: Saving platform NVS memory
>[774557.941262] Disabling non-boot CPUs ...
>[774557.942576] smpboot: CPU 1 is now offline
>[774557.942849] CPU 1 offline: Remove Rx thread
>[774557.944131] smpboot: CPU 2 is now offline
>[774557.944391] CPU 2 offline: Remove Rx thread
>[774557.944649] Broke affinity for irq 16
>[774557.944653] Broke affinity for irq 41
>[774557.944656] Broke affinity for irq 43
>[774557.944658] Broke affinity for irq 45
>[774557.944663] Broke affinity for irq 49
>[774557.944666] Broke affinity for irq 51
>[774557.945681] smpboot: CPU 3 is now offline
>[774557.945882] CPU 3 offline: Remove Rx thread
>[774557.946008] Extended CMOS year: 2000
>[774557.946870] ACPI: Low-level resume complete
>[774557.946910] PM: Restoring platform NVS memory
>[774557.947376] Extended CMOS year: 2000
>[774557.947949] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
>[774557.947979] Enabling non-boot CPUs ...
>[774560.124389] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[774560.138824] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[774560.138831] bnx2i: CPU 1 online: Create Rx thread
>[774560.138850] CPU1 is up
>[774560.138890] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[774560.152678] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[774560.152681] bnx2i: CPU 2 online: Create Rx thread
>[774560.152702] CPU2 is up
>[774560.152733] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[774560.166550] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[774560.166553] bnx2i: CPU 3 online: Create Rx thread
>[774560.166568] CPU3 is up
>[774560.169744] ACPI: Waking up from system sleep state S3
>[774560.258582] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[774560.264522] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[774560.286521] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[774560.363437] pcieport 0000:00:1c.7: wake-up capability disabled by ACPI
>[774560.363498] PM: noirq resume of devices complete after 148.752 msecs
>[774560.363566] PM: early resume of devices complete after 0.033 msecs
>[774560.363610] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[774560.363626] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[774560.363665] mei 0000:00:16.0: irq 54 for MSI/MSI-X
>[774560.363699] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[774560.363724] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
>[774560.363741] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[774560.363749] ahci 0000:00:1f.2: setting latency timer to 64
>[774560.363752] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[774560.363969] snd_hda_intel 0000:01:00.1: irq 58 for MSI/MSI-X
>[774560.366599] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[774560.366600] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[774560.540098] serial 00:09: activated
>[774560.540891] parport_pc 00:0a: activated
>[774560.608882] usb 2-1.4: reset high-speed USB device number 3 using ehci_hcd
>[774560.692690] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[774560.694679] ata6: SATA link down (SStatus 0 SControl 300)
>[774560.695496] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[774560.696661] ata5: SATA link down (SStatus 0 SControl 300)
>[774560.698596] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[774560.698599] ata2.00: configured for UDMA/100
>[774560.698666] ata4: SATA link down (SStatus 0 SControl 300)
>[774560.792485] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[774560.793421] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[774560.794526] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[774560.794601] ata1.00: configured for UDMA/100
>[774560.794650] sd 0:0:0:0: [sda] Starting disk
>[774560.796499] Extended CMOS year: 2000
>[774561.568777] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[774561.568883] radeon 0000:01:00.0: WB enabled
>[774561.568885] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022d078c00
>[774561.585176] [drm] ring test on 0 succeeded in 3 usecs
>[774561.585236] [drm] ib test on ring 0 succeeded in 0 usecs
>[774562.060109] firewire_core 0000:24:00.0: rediscovered device fw0
>[774562.512480] PM: resume of devices complete after 2153.005 msecs
>[774562.512587] PM: Finishing wakeup.
>[774562.512588] Restarting tasks ... done.
>[774562.536209] video LNXVIDEO:00: Restoring backlight state
>[774574.292660] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[774574.392691] e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>[774574.392915] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[774574.394269] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
>[774574.394411] iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0
>[774574.512030] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[774581.565131] wlan0: authenticate with 00:1f:1f:6b:a2:58
>[774581.571129] wlan0: send auth to 00:1f:1f:6b:a2:58 (try 1/3)
>[774581.572712] wlan0: authenticated
>[774581.572864] wlan0: associate with 00:1f:1f:6b:a2:58 (try 1/3)
>[774581.579549] wlan0: RX AssocResp from 00:1f:1f:6b:a2:58 (capab=0x411 status=0 aid=3)
>[774581.583509] wlan0: associated
>[774581.583532] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[779020.604360] usb 1-1.4: new high-speed USB device number 30 using ehci_hcd
>[779020.689615] usb 1-1.4: New USB device found, idVendor=0424, idProduct=2514
>[779020.689625] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[779020.690961] hub 1-1.4:1.0: USB hub found
>[779020.691051] hub 1-1.4:1.0: 4 ports detected
>[779020.963869] usb 1-1.4.2: new full-speed USB device number 31 using ehci_hcd
>[779021.049011] usb 1-1.4.2: New USB device found, idVendor=0557, idProduct=7000
>[779021.049021] usb 1-1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[779021.050678] hub 1-1.4.2:1.0: USB hub found
>[779021.050881] hub 1-1.4.2:1.0: 4 ports detected
>[779021.313150] usb 1-1.4.2.1: new low-speed USB device number 32 using ehci_hcd
>[779021.424119] usb 1-1.4.2.1: New USB device found, idVendor=1c4f, idProduct=0002
>[779021.424128] usb 1-1.4.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[779021.424134] usb 1-1.4.2.1: Product: USB Keykoard
>[779021.424139] usb 1-1.4.2.1: Manufacturer: USB
>[779021.438489] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.1/1-1.4.2.1:1.0/input/input45
>[779021.439203] hid-generic 0003:1C4F:0002.001F: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.4.2.1/input0
>[779023.057943] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[779023.057986] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[779046.391219] usbhid 1-1.4.2.1:1.1: can't add hid device: -110
>[779046.391260] usbhid: probe of 1-1.4.2.1:1.1 failed with error -110
>[779046.464261] usb 1-1.4.2.4: new low-speed USB device number 33 using ehci_hcd
>[779046.545134] usb 1-1.4.2.4: New USB device found, idVendor=046d, idProduct=c046
>[779046.545144] usb 1-1.4.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[779046.545149] usb 1-1.4.2.4: Product: USB Optical Mouse
>[779046.545154] usb 1-1.4.2.4: Manufacturer: Logitech
>[779046.551175] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.4/1-1.4.2.4:1.0/input/input46
>[779046.551802] hid-generic 0003:046D:C046.0020: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.4.2.4/input0
>[779103.518698] usb 1-1.4.2.4: USB disconnect, device number 33
>[779886.973718] usb 1-1.4.2.4: new low-speed USB device number 34 using ehci_hcd
>[779887.054547] usb 1-1.4.2.4: New USB device found, idVendor=046d, idProduct=c046
>[779887.054557] usb 1-1.4.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[779887.054563] usb 1-1.4.2.4: Product: USB Optical Mouse
>[779887.054568] usb 1-1.4.2.4: Manufacturer: Logitech
>[779887.059975] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2.4/1-1.4.2.4:1.0/input/input47
>[779887.060624] hid-generic 0003:046D:C046.0021: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.4.2.4/input0
>[780239.520279] wlan0: deauthenticating from 00:1f:1f:6b:a2:58 by local choice (reason=3)
>[780239.557785] cfg80211: Calling CRDA to update world regulatory domain
>[780239.635258] iwlwifi 0000:25:00.0: RF_KILL bit toggled to disable radio.
>[780239.803689] cfg80211: World regulatory domain updated:
>[780239.803692] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[780239.803693] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[780239.803694] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[780239.803695] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[780239.803696] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[780239.803697] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[780239.803706] cfg80211: Calling CRDA for country: CZ
>[780239.806429] cfg80211: Regulatory domain changed to country: CZ
>[780239.806434] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[780239.806438] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[780239.806442] cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
>[780239.806445] cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[780239.806448] cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>[781731.172793] hid-generic 0003:1C4F:0002.001F: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[781731.173652] hid-generic 0003:046D:C046.0021: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[781731.176841] usb 1-1.4: clear tt 2 (0200) error -71
>[781731.181054] hid-generic 0003:1C4F:0002.001F: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[781731.181132] usb 1-1.4: clear tt 2 (0220) error -71
>[781731.185276] usb 1-1.4: clear tt 2 (0200) error -71
>[781731.191745] hid-generic 0003:1C4F:0002.001F: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[781731.191789] hid-generic 0003:046D:C046.0021: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[781731.195838] usb 1-1.4: clear tt 2 (0200) error -71
>[781731.199951] usb 1-1.4: clear tt 2 (0220) error -71
>[781731.206130] hid-generic 0003:046D:C046.0021: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[781731.211423] usb 1-1.4: clear tt 2 (0220) error -71
>[781731.212854] hid-generic 0003:1C4F:0002.001F: can't reset device, 0000:00:1a.0-1.4.2.1/input0, status -71
>[781731.215484] hid-generic 0003:046D:C046.0021: can't reset device, 0000:00:1a.0-1.4.2.4/input0, status -71
>[781731.215795] usb 1-1.4: USB disconnect, device number 30
>[781731.215803] usb 1-1.4.2: USB disconnect, device number 31
>[781731.215809] usb 1-1.4.2.1: USB disconnect, device number 32
>[781731.216912] usb 1-1.4: clear tt 2 (0200) error -71
>[781731.216927] usb 1-1.4: clear tt 2 (0220) error -19
>[781731.253751] usb 1-1.4.2.4: USB disconnect, device number 34
>[781731.506526] e1000e: eth0 NIC Link is Down
>[781917.055487] iwlwifi 0000:25:00.0: RF_KILL bit toggled to enable radio.
>[781917.074973] iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
>[781917.075116] iwlwifi 0000:25:00.0: Radio type=0x1-0x2-0x0
>[781917.206819] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[781922.821230] wlan0: authenticate with 00:1f:1f:6b:a2:58
>[781922.827709] wlan0: send auth to 00:1f:1f:6b:a2:58 (try 1/3)
>[781922.829597] wlan0: authenticated
>[781922.830839] wlan0: associate with 00:1f:1f:6b:a2:58 (try 1/3)
>[781922.834657] wlan0: RX AssocResp from 00:1f:1f:6b:a2:58 (capab=0x411 status=0 aid=3)
>[781922.838459] wlan0: associated
>[781922.838519] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[784270.107330] type=1400 audit(1356694285.186:11): avc:  denied  { open } for  pid=2844 comm="openvpn" path="/home/vagojan/.cert/v.jansa@stk.cz-cert.pem" dev="dm-7" ino=2626537 scontext=system_u:system_r:openvpn_t:s0 tcontext=unconfined_u:object_r:user_home_t:s0 tclass=file

Actions: View

Attachments on bug 890653: 669856 | 669857 | 669858 | 669859 | 669860 | 669861