Attachment 671251 Details for Bug 891161 – File: dmesg

File: dmesg

dmesg (text/plain), 222.49 KB, created by Frank on 2013-01-02 04:53:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Frank

Created: 2013-01-02 04:53:33 UTC

Size: 222.49 KB

patch

obsolete

>[104934.134384] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[104934.155348] [drm] nouveau 0000:01:00.0: Restoring mode...
>[104934.177371] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[104934.286959] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[104934.341834] firewire_core 0000:0d:00.3: rediscovered device fw0
>[104935.934775] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[104935.942370] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[104935.942374] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[104935.942682] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[104935.942686] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[104935.945608] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[104935.945612] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[104935.945900] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[104935.945904] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[104935.947297] ata1.00: configured for UDMA/100
>[104935.947450] sd 0:0:0:0: [sda] Starting disk
>[104935.968143] PM: resume of devices complete after 2186.257 msecs
>[104935.968264] PM: Finishing wakeup.
>[104935.968265] Restarting tasks ... done.
>[104935.984396] video LNXVIDEO:01: Restoring backlight state
>[104937.773202] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[104937.873899] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[104937.874031] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[104937.898377] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[104937.898577] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[104938.005490] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[104938.051516] usb 1-1.4: new full-speed USB device number 31 using ehci_hcd
>[104938.140139] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[104938.140150] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[104938.140156] usb 1-1.4: Product: Broadcom Bluetooth Device
>[104938.140162] usb 1-1.4: Manufacturer: Broadcom Corp
>[104938.140167] usb 1-1.4: SerialNumber: 78DD08A62030
>[104944.213516] wlan0: authenticate with 00:19:5b:50:46:9d
>[104944.222393] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[104944.224269] wlan0: authenticated
>[104944.224688] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[104944.227900] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=7)
>[104944.230058] wlan0: associated
>[104944.230090] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[105963.577432] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[105963.632587] cfg80211: Calling CRDA to update world regulatory domain
>[105964.845353] cfg80211: World regulatory domain updated:
>[105964.845357] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[105964.845358] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[105964.845359] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[105964.845361] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[105964.845411] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[105964.845420] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[105964.845435] cfg80211: Calling CRDA for country: US
>[105964.933372] usb 1-1.4: USB disconnect, device number 31
>[105964.957253] cfg80211: Regulatory domain changed to country: US
>[105964.957257] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[105964.957259] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[105964.957260] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[105964.957262] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[105964.957264] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[105964.957265] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[105964.957267] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[105965.462521] PM: Syncing filesystems ... done.
>[105965.466434] PM: Preparing system for mem sleep
>[105965.825835] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[105965.837055] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[105965.847969] PM: Entering mem sleep
>[105965.848096] Suspending console(s) (use no_console_suspend to debug)
>[105966.035467] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[105966.035556] sd 0:0:0:0: [sda] Stopping disk
>[105966.095351] [drm] nouveau 0000:01:00.0: Disabling display...
>[105966.096428] ACPI handle has no context!
>[105966.121696] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[105966.657089] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[105966.657105] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[105966.657182] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[105967.552464] [drm] nouveau 0000:01:00.0: Idling channels...
>[105967.553247] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[105971.307662] [drm] nouveau 0000:01:00.0: And we're gone!
>[105971.318099] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[105971.318208] PM: suspend of devices complete after 5483.784 msecs
>[105971.318436] PM: late suspend of devices complete after 0.225 msecs
>[105971.329177] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[105971.339974] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[105971.340218] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[105971.350942] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[105971.362023] PM: noirq suspend of devices complete after 43.694 msecs
>[105971.362483] ACPI: Preparing to enter system sleep state S3
>[105971.411824] PM: Saving platform NVS memory
>[105971.414389] Disabling non-boot CPUs ...
>[105971.415738] smpboot: CPU 1 is now offline
>[105971.416468] Broke affinity for irq 44
>[105971.417648] smpboot: CPU 2 is now offline
>[105971.418368] Broke affinity for irq 23
>[105971.419387] smpboot: CPU 3 is now offline
>[105971.419818] Extended CMOS year: 2000
>[105971.420853] ACPI: Low-level resume complete
>[105971.420914] PM: Restoring platform NVS memory
>[105971.421642] Extended CMOS year: 2000
>[105971.421733] Enabling non-boot CPUs ...
>[105971.421870] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[105971.443620] CPU1 is up
>[105971.443684] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[105971.464561] CPU2 is up
>[105971.464628] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[105971.485511] CPU3 is up
>[105971.488486] ACPI: Waking up from system sleep state S3
>[105971.589236] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[105971.600211] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[105971.611421] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[105971.622153] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[105971.633224] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[105971.688140] PM: noirq resume of devices complete after 121.200 msecs
>[105971.688202] PM: early resume of devices complete after 0.033 msecs
>[105971.688247] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[105971.688285] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[105971.688375] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[105971.688425] pci 0000:00:1e.0: setting latency timer to 64
>[105971.688431] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[105971.688452] ahci 0000:00:1f.2: setting latency timer to 64
>[105971.688453] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[105971.688484] [drm] nouveau 0000:01:00.0: POSTing device...
>[105971.688486] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[105971.688490] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[105971.688928] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[105971.729322] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[105971.757095] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[105971.757134] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[105971.758199] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[105971.758200] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[105971.778188] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[105971.920564] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[105971.995203] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[105971.997584] ata5: SATA link down (SStatus 0 SControl 300)
>[105971.999177] ata6: SATA link down (SStatus 0 SControl 300)
>[105972.037473] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[105972.058428] [drm] nouveau 0000:01:00.0: Restoring mode...
>[105972.082243] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[105972.173931] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[105972.174769] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[105972.187734] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[105972.188938] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[105972.189361] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[105972.191098] ata2.00: configured for UDMA/100
>[105972.238647] firewire_core 0000:0d:00.3: rediscovered device fw0
>[105973.955278] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[105973.961898] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[105973.961902] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[105973.962170] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[105973.962173] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[105973.964989] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[105973.964994] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[105973.965238] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[105973.965242] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[105973.966492] ata1.00: configured for UDMA/100
>[105973.966596] sd 0:0:0:0: [sda] Starting disk
>[105973.987702] PM: resume of devices complete after 2305.307 msecs
>[105973.987822] PM: Finishing wakeup.
>[105973.987823] Restarting tasks ... done.
>[105974.015699] video LNXVIDEO:01: Restoring backlight state
>[105974.219798] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[105974.320397] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[105974.320667] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[105974.322814] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[105974.323119] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[105974.445661] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[105974.676509] usb 1-1.4: new full-speed USB device number 32 using ehci_hcd
>[105974.765776] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[105974.765781] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[105974.765783] usb 1-1.4: Product: Broadcom Bluetooth Device
>[105974.765785] usb 1-1.4: Manufacturer: Broadcom Corp
>[105974.765787] usb 1-1.4: SerialNumber: 78DD08A62030
>[105979.788612] wlan0: authenticate with 00:19:5b:50:46:9d
>[105979.799023] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[105979.800877] wlan0: authenticated
>[105979.801443] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[105979.804715] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=11)
>[105979.807068] wlan0: associated
>[105979.807110] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[106131.341523] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[106131.389761] cfg80211: Calling CRDA to update world regulatory domain
>[106131.424383] cfg80211: World regulatory domain updated:
>[106131.424388] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[106131.424390] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106131.424392] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[106131.424394] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[106131.424395] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106131.424396] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106131.424414] cfg80211: Calling CRDA for country: US
>[106131.433674] cfg80211: Regulatory domain changed to country: US
>[106131.433678] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[106131.433680] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[106131.433681] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[106131.433683] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106131.433684] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106131.433686] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106131.433687] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[106132.056686] usb 1-1.4: USB disconnect, device number 32
>[106132.433332] PM: Syncing filesystems ... done.
>[106132.437275] PM: Preparing system for mem sleep
>[106132.802858] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[106132.814175] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[106132.825108] PM: Entering mem sleep
>[106132.825246] Suspending console(s) (use no_console_suspend to debug)
>[106133.012828] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[106133.013039] sd 0:0:0:0: [sda] Stopping disk
>[106133.071617] [drm] nouveau 0000:01:00.0: Disabling display...
>[106133.073480] ACPI handle has no context!
>[106133.097232] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[106133.634281] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[106133.634309] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[106133.634384] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[106134.484564] [drm] nouveau 0000:01:00.0: Idling channels...
>[106134.485302] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[106138.201565] [drm] nouveau 0000:01:00.0: And we're gone!
>[106138.212754] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[106138.212919] PM: suspend of devices complete after 5400.910 msecs
>[106138.213142] PM: late suspend of devices complete after 0.220 msecs
>[106138.223773] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[106138.234555] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[106138.234803] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[106138.245522] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[106138.256600] PM: noirq suspend of devices complete after 43.563 msecs
>[106138.257061] ACPI: Preparing to enter system sleep state S3
>[106138.306405] PM: Saving platform NVS memory
>[106138.308957] Disabling non-boot CPUs ...
>[106138.310301] smpboot: CPU 1 is now offline
>[106138.311041] Broke affinity for irq 44
>[106138.312222] smpboot: CPU 2 is now offline
>[106138.312909] Broke affinity for irq 23
>[106138.313927] smpboot: CPU 3 is now offline
>[106138.314412] Extended CMOS year: 2000
>[106138.315448] ACPI: Low-level resume complete
>[106138.315509] PM: Restoring platform NVS memory
>[106138.316245] Extended CMOS year: 2000
>[106138.316336] Enabling non-boot CPUs ...
>[106138.316452] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[106138.338213] CPU1 is up
>[106138.338270] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[106138.359157] CPU2 is up
>[106138.359223] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[106138.380109] CPU3 is up
>[106138.383078] ACPI: Waking up from system sleep state S3
>[106138.483835] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[106138.494814] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[106138.506025] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[106138.516756] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[106138.527828] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[106138.582744] PM: noirq resume of devices complete after 121.198 msecs
>[106138.582804] PM: early resume of devices complete after 0.033 msecs
>[106138.582850] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[106138.582887] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[106138.582948] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[106138.582980] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[106138.583025] pci 0000:00:1e.0: setting latency timer to 64
>[106138.583030] ahci 0000:00:1f.2: setting latency timer to 64
>[106138.583048] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[106138.583052] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[106138.583079] [drm] nouveau 0000:01:00.0: POSTing device...
>[106138.583081] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[106138.583270] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[106138.624061] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[106138.651837] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[106138.651877] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[106138.652942] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[106138.652943] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[106138.672931] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[106138.816160] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[106138.890809] ata6: SATA link down (SStatus 0 SControl 300)
>[106138.892816] ata5: SATA link down (SStatus 0 SControl 300)
>[106138.894812] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[106138.932337] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[106138.953296] [drm] nouveau 0000:01:00.0: Restoring mode...
>[106138.973773] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[106139.068980] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[106139.069808] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[106139.082360] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[106139.083949] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[106139.084411] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[106139.086148] ata2.00: configured for UDMA/100
>[106139.137228] firewire_core 0000:0d:00.3: rediscovered device fw0
>[106140.850005] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[106140.861099] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[106140.861103] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[106140.861361] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[106140.861364] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[106140.864093] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[106140.864097] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[106140.864351] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[106140.864355] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[106140.865607] ata1.00: configured for UDMA/100
>[106140.865769] sd 0:0:0:0: [sda] Starting disk
>[106140.886716] PM: resume of devices complete after 2309.604 msecs
>[106140.886841] PM: Finishing wakeup.
>[106140.886842] Restarting tasks ... done.
>[106140.900245] video LNXVIDEO:01: Restoring backlight state
>[106141.088662] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[106141.189257] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[106141.189527] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[106141.194039] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[106141.194465] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[106141.320640] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[106141.320826] usb 1-1.4: new full-speed USB device number 33 using ehci_hcd
>[106141.409348] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[106141.409353] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[106141.409355] usb 1-1.4: Product: Broadcom Bluetooth Device
>[106141.409357] usb 1-1.4: Manufacturer: Broadcom Corp
>[106141.409359] usb 1-1.4: SerialNumber: 78DD08A62030
>[106146.650059] wlan0: authenticate with 00:19:5b:50:46:9d
>[106146.658864] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[106146.660655] wlan0: authenticated
>[106146.661653] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[106146.664875] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=4)
>[106146.667098] wlan0: associated
>[106146.667141] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[106490.538422] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[106490.579138] cfg80211: Calling CRDA to update world regulatory domain
>[106490.610970] cfg80211: World regulatory domain updated:
>[106490.610973] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[106490.610974] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106490.610976] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[106490.610977] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[106490.610978] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106490.610979] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106490.610989] cfg80211: Calling CRDA for country: US
>[106490.612919] cfg80211: Regulatory domain changed to country: US
>[106490.612921] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[106490.612923] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[106490.612924] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[106490.612925] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106490.612926] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106490.612927] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106490.612928] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[106491.238486] usb 1-1.4: USB disconnect, device number 33
>[106491.525432] PM: Syncing filesystems ... done.
>[106491.529259] PM: Preparing system for mem sleep
>[106491.898465] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[106491.909901] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[106491.920833] PM: Entering mem sleep
>[106491.920969] Suspending console(s) (use no_console_suspend to debug)
>[106492.109870] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[106492.109948] sd 0:0:0:0: [sda] Stopping disk
>[106492.172884] [drm] nouveau 0000:01:00.0: Disabling display...
>[106492.174261] ACPI handle has no context!
>[106492.197436] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[106492.728483] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[106492.728490] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[106492.728549] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[106493.616486] [drm] nouveau 0000:01:00.0: Idling channels...
>[106493.617314] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[106497.362352] [drm] nouveau 0000:01:00.0: And we're gone!
>[106497.372784] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[106497.372893] PM: suspend of devices complete after 5463.832 msecs
>[106497.373073] PM: late suspend of devices complete after 0.177 msecs
>[106497.383829] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[106497.394627] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[106497.394870] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[106497.405597] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[106497.416678] PM: noirq suspend of devices complete after 43.698 msecs
>[106497.417124] ACPI: Preparing to enter system sleep state S3
>[106497.466501] PM: Saving platform NVS memory
>[106497.469114] Disabling non-boot CPUs ...
>[106497.470460] smpboot: CPU 1 is now offline
>[106497.471184] Broke affinity for irq 44
>[106497.472366] smpboot: CPU 2 is now offline
>[106497.473057] Broke affinity for irq 23
>[106497.474074] smpboot: CPU 3 is now offline
>[106497.474539] Extended CMOS year: 2000
>[106497.475572] ACPI: Low-level resume complete
>[106497.475635] PM: Restoring platform NVS memory
>[106497.476363] Extended CMOS year: 2000
>[106497.476453] Enabling non-boot CPUs ...
>[106497.476588] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[106497.498305] CPU1 is up
>[106497.498363] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[106497.519256] CPU2 is up
>[106497.519323] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[106497.540223] CPU3 is up
>[106497.543164] ACPI: Waking up from system sleep state S3
>[106497.643968] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[106497.654946] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[106497.666160] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[106497.676899] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[106497.687974] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[106497.742903] PM: noirq resume of devices complete after 121.195 msecs
>[106497.742965] PM: early resume of devices complete after 0.033 msecs
>[106497.743012] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[106497.743047] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[106497.743140] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[106497.743145] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[106497.743193] pci 0000:00:1e.0: setting latency timer to 64
>[106497.743222] ahci 0000:00:1f.2: setting latency timer to 64
>[106497.743226] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[106497.743249] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[106497.743302] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[106497.743323] [drm] nouveau 0000:01:00.0: POSTing device...
>[106497.743325] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[106497.784108] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[106497.811882] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[106497.811922] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[106497.812986] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[106497.812987] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[106497.832975] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[106497.975412] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[106498.048092] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[106498.050445] ata5: SATA link down (SStatus 0 SControl 300)
>[106498.055069] ata6: SATA link down (SStatus 0 SControl 300)
>[106498.098213] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[106498.119169] [drm] nouveau 0000:01:00.0: Restoring mode...
>[106498.133032] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[106498.232362] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[106498.233194] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[106498.242683] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[106498.247351] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[106498.247788] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[106498.249539] ata2.00: configured for UDMA/100
>[106498.296568] firewire_core 0000:0d:00.3: rediscovered device fw0
>[106500.067655] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[106500.071799] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[106500.071802] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[106500.072044] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[106500.072047] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[106500.074741] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[106500.074745] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[106500.074994] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[106500.074997] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[106500.076358] ata1.00: configured for UDMA/100
>[106500.076541] sd 0:0:0:0: [sda] Starting disk
>[106500.097514] PM: resume of devices complete after 2359.717 msecs
>[106500.097639] PM: Finishing wakeup.
>[106500.097640] Restarting tasks ... done.
>[106500.111118] video LNXVIDEO:01: Restoring backlight state
>[106500.298203] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[106500.398982] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[106500.399113] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[106500.400692] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[106500.401002] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[106500.515742] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[106500.731214] usb 1-1.4: new full-speed USB device number 34 using ehci_hcd
>[106500.821001] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[106500.821008] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[106500.821015] usb 1-1.4: Product: Broadcom Bluetooth Device
>[106500.821085] usb 1-1.4: Manufacturer: Broadcom Corp
>[106500.821087] usb 1-1.4: SerialNumber: 78DD08A62030
>[106505.828667] wlan0: authenticate with 00:19:5b:50:46:9d
>[106505.837692] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[106505.839555] wlan0: authenticated
>[106505.839934] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[106505.843098] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=4)
>[106505.845526] wlan0: associated
>[106505.845576] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[108067.546280] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[108067.586700] cfg80211: Calling CRDA to update world regulatory domain
>[108069.228665] cfg80211: World regulatory domain updated:
>[108069.228670] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[108069.228672] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[108069.228675] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[108069.228677] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[108069.228678] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[108069.228680] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[108069.228692] cfg80211: Calling CRDA for country: US
>[108069.231734] cfg80211: Regulatory domain changed to country: US
>[108069.231737] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[108069.231740] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[108069.231742] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[108069.231744] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[108069.231746] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[108069.231747] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[108069.231749] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[108070.763068] usb 1-1.4: USB disconnect, device number 34
>[108072.440040] PM: Syncing filesystems ... done.
>[108075.579765] PM: Preparing system for mem sleep
>[108075.941918] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[108075.953424] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[108075.964326] PM: Entering mem sleep
>[108075.964460] Suspending console(s) (use no_console_suspend to debug)
>[108076.152770] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[108076.152859] sd 0:0:0:0: [sda] Stopping disk
>[108076.218438] [drm] nouveau 0000:01:00.0: Disabling display...
>[108076.219684] ACPI handle has no context!
>[108076.242922] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[108076.773094] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[108076.773138] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[108076.773257] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[108077.726682] [drm] nouveau 0000:01:00.0: Idling channels...
>[108077.727421] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[108081.449473] [drm] nouveau 0000:01:00.0: And we're gone!
>[108081.460405] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[108081.460520] PM: suspend of devices complete after 5509.844 msecs
>[108081.460702] PM: late suspend of devices complete after 0.179 msecs
>[108081.471447] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[108081.482245] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[108081.482488] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[108081.493215] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[108081.504291] PM: noirq suspend of devices complete after 43.698 msecs
>[108081.504743] ACPI: Preparing to enter system sleep state S3
>[108081.554097] PM: Saving platform NVS memory
>[108081.556590] Disabling non-boot CPUs ...
>[108081.558173] smpboot: CPU 1 is now offline
>[108081.558837] Broke affinity for irq 44
>[108081.560019] smpboot: CPU 2 is now offline
>[108081.560756] Broke affinity for irq 23
>[108081.561776] smpboot: CPU 3 is now offline
>[108081.562247] Extended CMOS year: 2000
>[108081.563283] ACPI: Low-level resume complete
>[108081.563345] PM: Restoring platform NVS memory
>[108081.564064] Extended CMOS year: 2000
>[108081.564156] Enabling non-boot CPUs ...
>[108081.564291] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[108081.585892] CPU1 is up
>[108081.585956] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[108081.606828] CPU2 is up
>[108081.606898] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[108081.627779] CPU3 is up
>[108081.630730] ACPI: Waking up from system sleep state S3
>[108081.731500] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[108081.742476] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[108081.753688] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[108081.764419] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[108081.775489] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[108081.830404] PM: noirq resume of devices complete after 121.197 msecs
>[108081.830464] PM: early resume of devices complete after 0.033 msecs
>[108081.830501] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[108081.830534] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[108081.830605] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[108081.830630] pci 0000:00:1e.0: setting latency timer to 64
>[108081.830645] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[108081.830655] ahci 0000:00:1f.2: setting latency timer to 64
>[108081.830683] [drm] nouveau 0000:01:00.0: POSTing device...
>[108081.830689] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[108081.830757] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
>[108081.830900] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[108081.831034] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[108081.871393] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[108081.899167] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[108081.899207] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[108081.900272] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[108081.900272] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[108081.920259] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[108082.062716] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[108082.134458] ata5: SATA link down (SStatus 0 SControl 300)
>[108082.136456] ata6: SATA link down (SStatus 0 SControl 300)
>[108082.139459] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[108082.180062] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[108082.201018] [drm] nouveau 0000:01:00.0: Restoring mode...
>[108082.224366] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[108082.320886] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[108082.321734] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[108082.329991] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[108082.335918] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[108082.336399] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[108082.338164] ata2.00: configured for UDMA/100
>[108082.384891] firewire_core 0000:0d:00.3: rediscovered device fw0
>[108084.082565] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[108084.088519] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[108084.088523] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[108084.088802] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[108084.088806] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[108084.091697] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[108084.091701] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[108084.091969] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[108084.091972] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[108084.093304] ata1.00: configured for UDMA/100
>[108084.093524] sd 0:0:0:0: [sda] Starting disk
>[108084.114390] PM: resume of devices complete after 2289.712 msecs
>[108084.114506] PM: Finishing wakeup.
>[108084.114507] Restarting tasks ... done.
>[108084.156432] video LNXVIDEO:01: Restoring backlight state
>[108084.369050] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[108084.469701] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[108084.469992] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[108084.471978] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[108084.472616] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[108084.585748] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[108084.817699] usb 1-1.4: new full-speed USB device number 35 using ehci_hcd
>[108084.906326] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[108084.906330] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[108084.906332] usb 1-1.4: Product: Broadcom Bluetooth Device
>[108084.906334] usb 1-1.4: Manufacturer: Broadcom Corp
>[108084.906335] usb 1-1.4: SerialNumber: 78DD08A62030
>[108089.939514] wlan0: authenticate with 00:19:5b:50:46:9d
>[108089.948440] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[108089.950331] wlan0: authenticated
>[108089.950607] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[108089.953916] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=4)
>[108089.956344] wlan0: associated
>[108089.956386] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[108145.090262] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[108145.140929] cfg80211: Calling CRDA to update world regulatory domain
>[108145.162557] cfg80211: World regulatory domain updated:
>[108145.162561] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[108145.162563] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[108145.162564] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[108145.162566] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[108145.162568] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[108145.162569] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[108145.162584] cfg80211: Calling CRDA for country: US
>[108145.167894] cfg80211: Regulatory domain changed to country: US
>[108145.167899] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[108145.167900] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[108145.167902] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[108145.167904] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[108145.167905] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[108145.167906] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[108145.167908] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[108145.927920] usb 1-1.4: USB disconnect, device number 35
>[108146.231559] PM: Syncing filesystems ... done.
>[108146.238648] PM: Preparing system for mem sleep
>[108146.588772] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[108146.600275] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[108146.611237] PM: Entering mem sleep
>[108146.611370] Suspending console(s) (use no_console_suspend to debug)
>[108146.799179] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[108146.799861] sd 0:0:0:0: [sda] Stopping disk
>[108146.862388] [drm] nouveau 0000:01:00.0: Disabling display...
>[108146.863631] ACPI handle has no context!
>[108146.887191] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[108147.419115] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[108147.419135] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[108147.419218] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[108148.141347] [drm] nouveau 0000:01:00.0: Idling channels...
>[108148.142084] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[108151.806187] [drm] nouveau 0000:01:00.0: And we're gone!
>[108151.817045] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[108151.817149] PM: suspend of devices complete after 5218.814 msecs
>[108151.817331] PM: late suspend of devices complete after 0.179 msecs
>[108151.828093] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[108151.838886] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[108151.839131] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[108151.849856] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[108151.860932] PM: noirq suspend of devices complete after 43.710 msecs
>[108151.861377] ACPI: Preparing to enter system sleep state S3
>[108151.910737] PM: Saving platform NVS memory
>[108151.913249] Disabling non-boot CPUs ...
>[108151.914834] smpboot: CPU 1 is now offline
>[108151.915563] Broke affinity for irq 44
>[108151.916750] smpboot: CPU 2 is now offline
>[108151.917373] Broke affinity for irq 23
>[108151.918395] smpboot: CPU 3 is now offline
>[108151.918848] Extended CMOS year: 2000
>[108151.919885] ACPI: Low-level resume complete
>[108151.919946] PM: Restoring platform NVS memory
>[108151.920670] Extended CMOS year: 2000
>[108151.920759] Enabling non-boot CPUs ...
>[108151.920892] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[108151.942535] CPU1 is up
>[108151.942598] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[108151.963474] CPU2 is up
>[108151.963544] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[108151.984424] CPU3 is up
>[108151.987371] ACPI: Waking up from system sleep state S3
>[108152.088146] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[108152.099121] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[108152.110332] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[108152.121064] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[108152.132138] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[108152.187048] PM: noirq resume of devices complete after 121.197 msecs
>[108152.187111] PM: early resume of devices complete after 0.033 msecs
>[108152.187152] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[108152.187219] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[108152.187265] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[108152.187331] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[108152.187342] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[108152.187361] pci 0000:00:1e.0: setting latency timer to 64
>[108152.187378] ahci 0000:00:1f.2: setting latency timer to 64
>[108152.187390] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[108152.187435] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[108152.187458] [drm] nouveau 0000:01:00.0: POSTing device...
>[108152.187460] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[108152.228381] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[108152.256156] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[108152.256195] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[108152.257259] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[108152.257260] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[108152.277249] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[108152.419479] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[108152.494106] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[108152.497107] ata5: SATA link down (SStatus 0 SControl 300)
>[108152.499091] ata6: SATA link down (SStatus 0 SControl 300)
>[108152.541415] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[108152.562377] [drm] nouveau 0000:01:00.0: Restoring mode...
>[108152.577108] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[108152.673564] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[108152.674405] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[108152.686631] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[108152.688576] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[108152.689009] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[108152.690753] ata2.00: configured for UDMA/100
>[108153.132063] firewire_core 0000:0d:00.3: rediscovered device fw0
>[108154.459164] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[108154.463605] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[108154.463609] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[108154.463850] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[108154.463853] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[108154.466566] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[108154.466570] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[108154.466820] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[108154.466824] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[108154.468019] ata1.00: configured for UDMA/100
>[108154.468120] sd 0:0:0:0: [sda] Starting disk
>[108154.497792] PM: resume of devices complete after 2316.530 msecs
>[108154.497909] PM: Finishing wakeup.
>[108154.497910] Restarting tasks ... done.
>[108154.512363] video LNXVIDEO:01: Restoring backlight state
>[108154.723730] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[108154.824280] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[108154.824443] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[108154.826892] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[108154.827265] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[108154.942755] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[108155.175403] usb 1-1.4: new full-speed USB device number 36 using ehci_hcd
>[108155.263927] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[108155.263931] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[108155.263934] usb 1-1.4: Product: Broadcom Bluetooth Device
>[108155.263936] usb 1-1.4: Manufacturer: Broadcom Corp
>[108155.263938] usb 1-1.4: SerialNumber: 78DD08A62030
>[108160.332149] wlan0: authenticate with 00:19:5b:50:46:9d
>[108160.344540] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[108160.346460] wlan0: authenticated
>[108160.347204] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[108160.350463] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=4)
>[108160.352890] wlan0: associated
>[108160.352928] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[109357.506797] sock: process `skype' is using obsolete setsockopt SO_BSDCOMPAT
>[109526.741030] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[109526.778192] cfg80211: Calling CRDA to update world regulatory domain
>[109526.806725] cfg80211: World regulatory domain updated:
>[109526.806732] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[109526.806737] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109526.806742] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[109526.806747] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[109526.806753] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109526.806755] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109526.806770] cfg80211: Calling CRDA for country: US
>[109526.812034] cfg80211: Regulatory domain changed to country: US
>[109526.812039] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[109526.812041] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[109526.812042] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[109526.812044] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109526.812045] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109526.812047] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109526.812048] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[109527.558388] usb 1-1.4: USB disconnect, device number 36
>[109528.099946] PM: Syncing filesystems ... done.
>[109528.305386] PM: Preparing system for mem sleep
>[109528.641210] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[109528.652347] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[109528.663256] PM: Entering mem sleep
>[109528.663406] Suspending console(s) (use no_console_suspend to debug)
>[109528.850230] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[109528.850326] sd 0:0:0:0: [sda] Stopping disk
>[109528.910263] [drm] nouveau 0000:01:00.0: Disabling display...
>[109528.911652] ACPI handle has no context!
>[109528.935366] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[109529.472629] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[109529.472705] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[109529.472802] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[109530.460091] [drm] nouveau 0000:01:00.0: Idling channels...
>[109530.460882] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[109534.227259] [drm] nouveau 0000:01:00.0: And we're gone!
>[109534.238090] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[109534.238207] PM: suspend of devices complete after 5588.808 msecs
>[109534.238412] PM: late suspend of devices complete after 0.203 msecs
>[109534.249173] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[109534.259972] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[109534.260219] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[109534.270934] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[109534.282011] PM: noirq suspend of devices complete after 43.708 msecs
>[109534.282457] ACPI: Preparing to enter system sleep state S3
>[109534.331813] PM: Saving platform NVS memory
>[109534.334385] Disabling non-boot CPUs ...
>[109534.335793] smpboot: CPU 1 is now offline
>[109534.336512] Broke affinity for irq 44
>[109534.337693] smpboot: CPU 2 is now offline
>[109534.338398] Broke affinity for irq 23
>[109534.339417] smpboot: CPU 3 is now offline
>[109534.339852] Extended CMOS year: 2000
>[109534.340887] ACPI: Low-level resume complete
>[109534.340948] PM: Restoring platform NVS memory
>[109534.341684] Extended CMOS year: 2000
>[109534.341772] Enabling non-boot CPUs ...
>[109534.341906] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[109534.363615] CPU1 is up
>[109534.363677] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[109534.384556] CPU2 is up
>[109534.384624] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[109534.405507] CPU3 is up
>[109534.408483] ACPI: Waking up from system sleep state S3
>[109534.509230] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[109534.520206] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[109534.531415] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[109534.542149] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[109534.553219] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[109534.608134] PM: noirq resume of devices complete after 121.200 msecs
>[109534.608196] PM: early resume of devices complete after 0.033 msecs
>[109534.608240] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[109534.608313] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[109534.608344] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[109534.608403] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[109534.608436] pci 0000:00:1e.0: setting latency timer to 64
>[109534.608467] ahci 0000:00:1f.2: setting latency timer to 64
>[109534.608468] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[109534.608469] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[109534.608494] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[109534.608498] [drm] nouveau 0000:01:00.0: POSTing device...
>[109534.608500] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[109534.649244] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[109534.677019] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[109534.677058] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[109534.678122] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[109534.678122] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[109534.698110] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[109534.840421] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[109534.916139] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[109534.918483] ata6: SATA link down (SStatus 0 SControl 300)
>[109534.920125] ata5: SATA link down (SStatus 0 SControl 300)
>[109534.956031] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[109534.976994] [drm] nouveau 0000:01:00.0: Restoring mode...
>[109534.998214] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[109535.097249] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[109535.098104] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[109535.107716] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[109535.112279] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[109535.112779] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[109535.114528] ata2.00: configured for UDMA/100
>[109535.158613] firewire_core 0000:0d:00.3: rediscovered device fw0
>[109535.487876] mei 0000:00:16.0: wd: unable to register watchdog device.
>[109536.962025] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[109536.966591] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[109536.966595] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[109536.966864] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[109536.966867] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[109536.969718] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[109536.969722] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[109536.970010] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[109536.970014] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[109536.971414] ata1.00: configured for UDMA/100
>[109536.971602] sd 0:0:0:0: [sda] Starting disk
>[109536.992434] PM: resume of devices complete after 2390.289 msecs
>[109536.992580] PM: Finishing wakeup.
>[109536.992581] Restarting tasks ... done.
>[109537.020278] video LNXVIDEO:01: Restoring backlight state
>[109537.202621] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[109537.303217] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[109537.303366] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[109537.305822] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[109537.306152] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[109537.421071] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[109537.585585] usb 1-1.4: new full-speed USB device number 37 using ehci_hcd
>[109537.673930] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[109537.673935] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[109537.673938] usb 1-1.4: Product: Broadcom Bluetooth Device
>[109537.673940] usb 1-1.4: Manufacturer: Broadcom Corp
>[109537.673942] usb 1-1.4: SerialNumber: 78DD08A62030
>[109542.829814] wlan0: authenticate with 00:19:5b:50:46:9d
>[109542.839289] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[109542.841208] wlan0: authenticated
>[109542.842051] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[109542.845333] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=6)
>[109542.847735] wlan0: associated
>[109542.847784] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[111297.875030] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[111297.919269] cfg80211: Calling CRDA to update world regulatory domain
>[111297.942093] cfg80211: World regulatory domain updated:
>[111297.942097] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[111297.942100] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111297.942101] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[111297.942103] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[111297.942104] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111297.942106] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111297.942121] cfg80211: Calling CRDA for country: US
>[111297.946786] cfg80211: Regulatory domain changed to country: US
>[111297.946790] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[111297.946792] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[111297.946793] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[111297.946795] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111297.946796] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111297.946797] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111297.946799] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[111298.637230] usb 1-1.4: USB disconnect, device number 37
>[111299.631315] PM: Syncing filesystems ... done.
>[111300.390324] PM: Preparing system for mem sleep
>[111300.758973] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[111300.769992] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[111300.780909] PM: Entering mem sleep
>[111300.781048] Suspending console(s) (use no_console_suspend to debug)
>[111300.970415] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[111300.970522] sd 0:0:0:0: [sda] Stopping disk
>[111301.029580] [drm] nouveau 0000:01:00.0: Disabling display...
>[111301.031290] ACPI handle has no context!
>[111301.055770] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[111301.590387] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[111301.590396] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[111301.590483] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[111302.590022] [drm] nouveau 0000:01:00.0: Idling channels...
>[111302.590766] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[111306.342887] [drm] nouveau 0000:01:00.0: And we're gone!
>[111306.353678] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[111306.353856] PM: suspend of devices complete after 5586.806 msecs
>[111306.354074] PM: late suspend of devices complete after 0.215 msecs
>[111306.364706] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[111306.375504] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[111306.375751] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[111306.386474] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[111306.397551] PM: noirq suspend of devices complete after 43.586 msecs
>[111306.397999] ACPI: Preparing to enter system sleep state S3
>[111306.447354] PM: Saving platform NVS memory
>[111306.449862] Disabling non-boot CPUs ...
>[111306.451456] smpboot: CPU 1 is now offline
>[111306.452149] Broke affinity for irq 44
>[111306.453167] smpboot: CPU 2 is now offline
>[111306.453810] Broke affinity for irq 23
>[111306.454833] smpboot: CPU 3 is now offline
>[111306.455287] Extended CMOS year: 2000
>[111306.456321] ACPI: Low-level resume complete
>[111306.456383] PM: Restoring platform NVS memory
>[111306.457106] Extended CMOS year: 2000
>[111306.457209] Enabling non-boot CPUs ...
>[111306.457342] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[111306.479144] CPU1 is up
>[111306.479211] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[111306.500086] CPU2 is up
>[111306.500157] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[111306.521036] CPU3 is up
>[111306.523968] ACPI: Waking up from system sleep state S3
>[111306.624756] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[111306.635732] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[111306.646942] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[111306.657673] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[111306.668745] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[111306.723655] PM: noirq resume of devices complete after 121.195 msecs
>[111306.723716] PM: early resume of devices complete after 0.033 msecs
>[111306.723760] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[111306.723797] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[111306.723891] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[111306.723893] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[111306.723943] pci 0000:00:1e.0: setting latency timer to 64
>[111306.723969] ahci 0000:00:1f.2: setting latency timer to 64
>[111306.723986] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[111306.723990] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[111306.724045] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[111306.724061] [drm] nouveau 0000:01:00.0: POSTing device...
>[111306.724063] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[111306.764714] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[111306.792488] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[111306.792528] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[111306.793593] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[111306.793594] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[111306.813581] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[111306.956048] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[111307.030703] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[111307.033079] ata5: SATA link down (SStatus 0 SControl 300)
>[111307.034695] ata6: SATA link down (SStatus 0 SControl 300)
>[111307.071593] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[111307.092555] [drm] nouveau 0000:01:00.0: Restoring mode...
>[111307.113664] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[111307.214632] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[111307.215465] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[111307.223295] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[111307.229629] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[111307.230052] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[111307.231788] ata2.00: configured for UDMA/100
>[111307.276140] firewire_core 0000:0d:00.3: rediscovered device fw0
>[111307.598673] mei 0000:00:16.0: wd: unable to register watchdog device.
>[111309.024651] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[111309.032592] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[111309.032595] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[111309.032860] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[111309.032863] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[111309.035725] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[111309.035729] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[111309.036002] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[111309.036006] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[111309.037324] ata1.00: configured for UDMA/100
>[111309.037477] sd 0:0:0:0: [sda] Starting disk
>[111309.058267] PM: resume of devices complete after 2340.508 msecs
>[111309.058422] PM: Finishing wakeup.
>[111309.058423] Restarting tasks ... done.
>[111309.117172] video LNXVIDEO:01: Restoring backlight state
>[111309.326153] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[111309.426696] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[111309.426852] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[111309.427940] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[111309.428255] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[111309.541421] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[111309.712971] usb 1-1.4: new full-speed USB device number 38 using ehci_hcd
>[111309.801749] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[111309.801754] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[111309.801757] usb 1-1.4: Product: Broadcom Bluetooth Device
>[111309.801759] usb 1-1.4: Manufacturer: Broadcom Corp
>[111309.801761] usb 1-1.4: SerialNumber: 78DD08A62030
>[111315.052288] wlan0: authenticate with 00:19:5b:50:46:9d
>[111315.061287] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[111315.063189] wlan0: authenticated
>[111315.064211] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[111315.067433] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=15)
>[111315.070119] wlan0: associated
>[111315.070185] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[113173.351019] cfg80211: Calling CRDA to update world regulatory domain
>[113173.383211] cfg80211: World regulatory domain updated:
>[113173.383216] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[113173.383220] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[113173.383223] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[113173.383226] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[113173.383229] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[113173.383231] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[113173.383255] cfg80211: Calling CRDA for country: US
>[113173.386921] cfg80211: Regulatory domain changed to country: US
>[113173.386925] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[113173.386929] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[113173.386932] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[113173.386935] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[113173.386937] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[113173.386940] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[113173.386943] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[113183.598934] wlan0: authenticate with 00:19:5b:50:46:9d
>[113183.602819] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[113183.604908] wlan0: authenticated
>[113183.605157] wlan0: waiting for beacon from 00:19:5b:50:46:9d
>[113183.613763] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[113183.617522] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=15)
>[113183.620657] wlan0: associated
>[116455.706493] thinkpad_acpi: EC reports that Thermal Table has changed
>[118642.302096] thinkpad_acpi: EC reports that Thermal Table has changed
>[132956.214674] iwlwifi 0000:03:00.0: fail to flush all tx fifo queues
>[143468.509848] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[143468.572718] cfg80211: Calling CRDA to update world regulatory domain
>[143471.360857] usb 1-1.4: USB disconnect, device number 38
>[143472.061586] cfg80211: World regulatory domain updated:
>[143472.061590] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[143472.061591] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[143472.061592] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[143472.061593] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[143472.061594] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[143472.061595] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[143472.061604] cfg80211: Calling CRDA for country: US
>[143472.079329] cfg80211: Regulatory domain changed to country: US
>[143472.079333] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[143472.079335] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[143472.079337] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[143472.079339] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[143472.079341] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[143472.079342] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[143472.079344] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[143472.468539] PM: Syncing filesystems ... done.
>[143472.470796] PM: Preparing system for mem sleep
>[143473.071669] Freezing user space processes ... (elapsed 0.04 seconds) done.
>[143473.116181] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[143473.127149] PM: Entering mem sleep
>[143473.127314] Suspending console(s) (use no_console_suspend to debug)
>[143473.316475] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[143473.316732] sd 0:0:0:0: [sda] Stopping disk
>[143473.377280] [drm] nouveau 0000:01:00.0: Disabling display...
>[143473.378502] ACPI handle has no context!
>[143473.401757] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[143473.936355] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[143473.936368] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[143473.936445] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[143474.719832] [drm] nouveau 0000:01:00.0: Idling channels...
>[143474.720569] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[143478.408192] [drm] nouveau 0000:01:00.0: And we're gone!
>[143478.418734] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[143478.418865] PM: suspend of devices complete after 5304.806 msecs
>[143478.419049] PM: late suspend of devices complete after 0.182 msecs
>[143478.429788] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[143478.440578] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[143478.440825] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[143478.451547] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[143478.462631] PM: noirq suspend of devices complete after 43.690 msecs
>[143478.463077] ACPI: Preparing to enter system sleep state S3
>[143478.512427] PM: Saving platform NVS memory
>[143478.514930] Disabling non-boot CPUs ...
>[143478.516515] smpboot: CPU 1 is now offline
>[143478.517227] Broke affinity for irq 44
>[143478.518415] smpboot: CPU 2 is now offline
>[143478.519053] Broke affinity for irq 23
>[143478.520074] smpboot: CPU 3 is now offline
>[143478.520513] Extended CMOS year: 2000
>[143478.521546] ACPI: Low-level resume complete
>[143478.521608] PM: Restoring platform NVS memory
>[143478.522346] Extended CMOS year: 2000
>[143478.522438] Enabling non-boot CPUs ...
>[143478.522582] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[143478.544234] CPU1 is up
>[143478.544297] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[143478.565174] CPU2 is up
>[143478.565244] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[143478.586132] CPU3 is up
>[143478.589047] ACPI: Waking up from system sleep state S3
>[143478.689845] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[143478.700821] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[143478.712034] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[143478.722766] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[143478.733839] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[143478.788752] PM: noirq resume of devices complete after 121.199 msecs
>[143478.788813] PM: early resume of devices complete after 0.033 msecs
>[143478.788868] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[143478.788889] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[143478.788969] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[143478.788980] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[143478.789022] pci 0000:00:1e.0: setting latency timer to 64
>[143478.789045] ahci 0000:00:1f.2: setting latency timer to 64
>[143478.789049] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[143478.789125] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[143478.789152] [drm] nouveau 0000:01:00.0: POSTing device...
>[143478.789153] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[143478.789249] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[143478.829925] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[143478.857700] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[143478.857739] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[143478.858804] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[143478.858805] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[143478.878792] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[143479.021178] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[143479.095812] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[143479.098170] ata6: SATA link down (SStatus 0 SControl 300)
>[143479.099790] ata5: SATA link down (SStatus 0 SControl 300)
>[143479.138664] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[143479.159632] [drm] nouveau 0000:01:00.0: Restoring mode...
>[143479.178798] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[143479.278472] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[143479.279275] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[143479.288384] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[143479.293449] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[143479.293914] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[143479.295650] ata2.00: configured for UDMA/100
>[143479.343223] firewire_core 0000:0d:00.3: rediscovered device fw0
>[143479.668576] mei 0000:00:16.0: wd: unable to register watchdog device.
>[143480.990042] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[143480.995665] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[143480.995669] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[143480.995918] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[143480.995921] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[143480.998904] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[143480.998908] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[143480.999168] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[143480.999172] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[143481.000414] ata1.00: configured for UDMA/100
>[143481.000642] sd 0:0:0:0: [sda] Starting disk
>[143481.021501] PM: resume of devices complete after 2238.339 msecs
>[143481.021648] PM: Finishing wakeup.
>[143481.021648] Restarting tasks ... done.
>[143481.030527] video LNXVIDEO:01: Restoring backlight state
>[143481.184061] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[143481.284301] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[143481.284536] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[143481.287452] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[143481.287647] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[143481.394697] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[143481.520737] usb 1-1.4: new full-speed USB device number 39 using ehci_hcd
>[143481.610391] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[143481.610396] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[143481.610398] usb 1-1.4: Product: Broadcom Bluetooth Device
>[143481.610399] usb 1-1.4: Manufacturer: Broadcom Corp
>[143481.610401] usb 1-1.4: SerialNumber: 78DD08A62030
>[143487.311882] wlan0: authenticate with 00:19:5b:50:46:9d
>[143487.323103] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[143487.324973] wlan0: authenticated
>[143487.325934] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[143487.329234] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=4)
>[143487.331695] wlan0: associated
>[143487.331725] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[145865.010134] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[145865.073376] cfg80211: Calling CRDA to update world regulatory domain
>[145865.155527] cfg80211: World regulatory domain updated:
>[145865.155530] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[145865.155531] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[145865.155533] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[145865.155534] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[145865.155535] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[145865.155536] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[145865.155545] cfg80211: Calling CRDA for country: US
>[145865.158455] cfg80211: Regulatory domain changed to country: US
>[145865.158457] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[145865.158458] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[145865.158459] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[145865.158460] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[145865.158461] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[145865.158462] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[145865.158463] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[145866.917701] usb 1-1.4: USB disconnect, device number 39
>[145868.420641] PM: Syncing filesystems ... done.
>[145869.680534] PM: Preparing system for mem sleep
>[145870.276516] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[145870.287571] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[145870.298514] PM: Entering mem sleep
>[145870.298681] Suspending console(s) (use no_console_suspend to debug)
>[145870.487455] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[145870.504447] sd 0:0:0:0: [sda] Stopping disk
>[145870.546531] [drm] nouveau 0000:01:00.0: Disabling display...
>[145870.547919] ACPI handle has no context!
>[145870.571603] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[145871.107900] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[145871.107913] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[145871.107992] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[145872.100592] [drm] nouveau 0000:01:00.0: Idling channels...
>[145872.101329] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[145875.837929] [drm] nouveau 0000:01:00.0: And we're gone!
>[145875.848958] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[145875.849134] PM: suspend of devices complete after 5564.919 msecs
>[145875.849358] PM: late suspend of devices complete after 0.222 msecs
>[145875.859961] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[145875.870757] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[145875.871003] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[145875.881727] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[145875.892801] PM: noirq suspend of devices complete after 43.556 msecs
>[145875.893263] ACPI: Preparing to enter system sleep state S3
>[145875.942600] PM: Saving platform NVS memory
>[145875.945089] Disabling non-boot CPUs ...
>[145875.946698] smpboot: CPU 1 is now offline
>[145875.947351] Broke affinity for irq 44
>[145875.948527] smpboot: CPU 2 is now offline
>[145875.949216] Broke affinity for irq 23
>[145875.950238] smpboot: CPU 3 is now offline
>[145875.950681] Extended CMOS year: 2000
>[145875.951714] ACPI: Low-level resume complete
>[145875.951775] PM: Restoring platform NVS memory
>[145875.952514] Extended CMOS year: 2000
>[145875.952602] Enabling non-boot CPUs ...
>[145875.952719] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[145875.974403] CPU1 is up
>[145875.974464] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[145875.995341] CPU2 is up
>[145875.995407] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[145876.016289] CPU3 is up
>[145876.019249] ACPI: Waking up from system sleep state S3
>[145876.120003] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[145876.130978] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[145876.142188] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[145876.152918] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[145876.163989] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[145876.218896] PM: noirq resume of devices complete after 121.199 msecs
>[145876.218957] PM: early resume of devices complete after 0.033 msecs
>[145876.219000] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[145876.219033] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[145876.219127] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[145876.219138] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[145876.219184] pci 0000:00:1e.0: setting latency timer to 64
>[145876.219210] ahci 0000:00:1f.2: setting latency timer to 64
>[145876.219212] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[145876.219225] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[145876.219226] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[145876.219245] [drm] nouveau 0000:01:00.0: POSTing device...
>[145876.219247] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[145876.260069] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[145876.287844] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[145876.287884] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[145876.288948] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[145876.288949] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[145876.308937] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[145876.451293] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[145876.525927] ata6: SATA link down (SStatus 0 SControl 300)
>[145876.528931] ata5: SATA link down (SStatus 0 SControl 300)
>[145876.530915] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[145876.575653] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[145876.596614] [drm] nouveau 0000:01:00.0: Restoring mode...
>[145876.608917] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[145876.710809] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[145876.711615] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[145876.718431] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[145876.725739] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[145876.726170] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[145876.727903] ata2.00: configured for UDMA/100
>[145877.096444] firewire_core 0000:0d:00.3: rediscovered device fw0
>[145877.102676] mei 0000:00:16.0: wd: unable to register watchdog device.
>[145878.558609] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[145878.566339] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[145878.566343] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[145878.566620] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[145878.566623] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[145878.569502] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[145878.569506] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[145878.569785] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[145878.569789] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[145878.571231] ata1.00: configured for UDMA/100
>[145878.571333] sd 0:0:0:0: [sda] Starting disk
>[145878.592010] PM: resume of devices complete after 2379.300 msecs
>[145878.592166] PM: Finishing wakeup.
>[145878.592167] Restarting tasks ... done.
>[145878.632645] video LNXVIDEO:01: Restoring backlight state
>[145878.935831] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[145879.037209] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[145879.037453] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[145879.043958] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[145879.044216] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[145879.168363] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[145879.206965] usb 1-1.4: new full-speed USB device number 40 using ehci_hcd
>[145879.295732] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[145879.295737] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[145879.295740] usb 1-1.4: Product: Broadcom Bluetooth Device
>[145879.295742] usb 1-1.4: Manufacturer: Broadcom Corp
>[145879.295744] usb 1-1.4: SerialNumber: 78DD08A62030
>[145884.424145] wlan0: authenticate with 00:19:5b:50:46:9d
>[145884.433861] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[145884.435801] wlan0: authenticated
>[145884.436042] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[145884.441698] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=8)
>[145884.444651] wlan0: associated
>[145884.444691] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[146835.143078] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[147081.701197] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[153135.306162] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[153135.357095] cfg80211: Calling CRDA to update world regulatory domain
>[153135.454863] cfg80211: World regulatory domain updated:
>[153135.454867] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[153135.454870] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[153135.454872] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[153135.454874] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[153135.454876] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[153135.454877] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[153135.454890] cfg80211: Calling CRDA for country: US
>[153135.459131] cfg80211: Regulatory domain changed to country: US
>[153135.459135] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[153135.459139] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[153135.459142] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[153135.459145] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[153135.459147] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[153135.459150] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[153135.459153] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[153136.361347] usb 1-1.4: USB disconnect, device number 40
>[153136.947531] PM: Syncing filesystems ... done.
>[153136.952087] PM: Preparing system for mem sleep
>[153137.310197] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[153137.320960] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[153137.331896] PM: Entering mem sleep
>[153137.332046] Suspending console(s) (use no_console_suspend to debug)
>[153137.516333] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[153137.516442] sd 0:0:0:0: [sda] Stopping disk
>[153137.575755] [drm] nouveau 0000:01:00.0: Disabling display...
>[153137.577339] ACPI handle has no context!
>[153137.601825] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[153138.124967] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[153138.124984] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[153138.125068] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[153139.170547] [drm] nouveau 0000:01:00.0: Idling channels...
>[153139.171335] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[153142.910656] [drm] nouveau 0000:01:00.0: And we're gone!
>[153142.921756] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[153142.921875] PM: suspend of devices complete after 5603.840 msecs
>[153142.922098] PM: late suspend of devices complete after 0.220 msecs
>[153142.932795] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[153142.943594] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[153142.943841] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[153142.954564] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[153142.965640] PM: noirq suspend of devices complete after 43.650 msecs
>[153142.966096] ACPI: Preparing to enter system sleep state S3
>[153143.015446] PM: Saving platform NVS memory
>[153143.018008] Disabling non-boot CPUs ...
>[153143.019615] smpboot: CPU 1 is now offline
>[153143.020360] Broke affinity for irq 44
>[153143.021538] smpboot: CPU 2 is now offline
>[153143.022194] Broke affinity for irq 23
>[153143.023217] smpboot: CPU 3 is now offline
>[153143.023693] Extended CMOS year: 2000
>[153143.024729] ACPI: Low-level resume complete
>[153143.024792] PM: Restoring platform NVS memory
>[153143.025528] Extended CMOS year: 2000
>[153143.025619] Enabling non-boot CPUs ...
>[153143.025763] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[153143.048250] CPU1 is up
>[153143.048315] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[153143.069191] CPU2 is up
>[153143.069261] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[153143.090142] CPU3 is up
>[153143.093089] ACPI: Waking up from system sleep state S3
>[153143.193866] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[153143.204841] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[153143.216050] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[153143.226784] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[153143.237854] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[153143.292769] PM: noirq resume of devices complete after 121.197 msecs
>[153143.292831] PM: early resume of devices complete after 0.033 msecs
>[153143.292871] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[153143.292911] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[153143.292967] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[153143.293008] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[153143.293035] pci 0000:00:1e.0: setting latency timer to 64
>[153143.293060] ahci 0000:00:1f.2: setting latency timer to 64
>[153143.293064] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[153143.293143] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[153143.293174] [drm] nouveau 0000:01:00.0: POSTing device...
>[153143.293176] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[153143.293177] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[153143.334030] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[153143.361804] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[153143.361843] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[153143.362908] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[153143.362908] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[153143.382896] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[153143.525191] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[153143.599827] ata6: SATA link down (SStatus 0 SControl 300)
>[153143.603821] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[153143.604803] ata5: SATA link down (SStatus 0 SControl 300)
>[153143.642467] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[153143.663426] [drm] nouveau 0000:01:00.0: Restoring mode...
>[153143.682777] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[153143.781099] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[153143.781940] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[153143.792358] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[153143.796083] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[153143.796494] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[153143.798243] ata2.00: configured for UDMA/100
>[153143.847252] firewire_core 0000:0d:00.3: rediscovered device fw0
>[153144.176127] mei 0000:00:16.0: wd: unable to register watchdog device.
>[153145.559895] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[153145.569734] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[153145.569738] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[153145.570005] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[153145.570008] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[153145.572869] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[153145.572873] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[153145.573158] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[153145.573162] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[153145.574524] ata1.00: configured for UDMA/100
>[153145.574684] sd 0:0:0:0: [sda] Starting disk
>[153145.595466] PM: resume of devices complete after 2308.465 msecs
>[153145.595619] PM: Finishing wakeup.
>[153145.595620] Restarting tasks ... done.
>[153145.612656] video LNXVIDEO:01: Restoring backlight state
>[153145.836519] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[153145.936990] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[153145.937118] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[153145.938119] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[153145.938428] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[153146.063924] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[153146.280116] usb 1-1.4: new full-speed USB device number 41 using ehci_hcd
>[153146.369377] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[153146.369382] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[153146.369384] usb 1-1.4: Product: Broadcom Bluetooth Device
>[153146.369387] usb 1-1.4: Manufacturer: Broadcom Corp
>[153146.369389] usb 1-1.4: SerialNumber: 78DD08A62030
>[153151.410322] wlan0: authenticate with 00:19:5b:50:46:9d
>[153151.422300] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[153151.424210] wlan0: authenticated
>[153151.424992] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[153151.428246] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=4)
>[153151.430450] wlan0: associated
>[153151.430494] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[154213.830319] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[154213.870024] cfg80211: Calling CRDA to update world regulatory domain
>[154213.899953] cfg80211: World regulatory domain updated:
>[154213.899958] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[154213.899961] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[154213.899962] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[154213.899964] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[154213.899966] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[154213.899968] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[154213.899982] cfg80211: Calling CRDA for country: US
>[154213.904187] cfg80211: Regulatory domain changed to country: US
>[154213.904191] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[154213.904192] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[154213.904194] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[154213.904195] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[154213.904197] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[154213.904198] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[154213.904200] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[154214.785698] usb 1-1.4: USB disconnect, device number 41
>[154215.534309] PM: Syncing filesystems ... done.
>[154215.826680] PM: Preparing system for mem sleep
>[154216.169909] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[154216.181075] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[154216.192009] PM: Entering mem sleep
>[154216.192152] Suspending console(s) (use no_console_suspend to debug)
>[154216.379837] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[154216.379921] sd 0:0:0:0: [sda] Stopping disk
>[154216.440522] [drm] nouveau 0000:01:00.0: Disabling display...
>[154216.442426] ACPI handle has no context!
>[154216.466342] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[154217.001330] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[154217.001333] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[154217.001394] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[154217.808187] [drm] nouveau 0000:01:00.0: Idling channels...
>[154217.808979] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[154221.569153] [drm] nouveau 0000:01:00.0: And we're gone!
>[154221.579433] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[154221.579604] PM: suspend of devices complete after 5400.934 msecs
>[154221.579834] PM: late suspend of devices complete after 0.228 msecs
>[154221.590439] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[154221.601236] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[154221.601482] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[154221.612207] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[154221.623283] PM: noirq suspend of devices complete after 43.556 msecs
>[154221.623740] ACPI: Preparing to enter system sleep state S3
>[154221.673088] PM: Saving platform NVS memory
>[154221.675713] Disabling non-boot CPUs ...
>[154221.677308] smpboot: CPU 1 is now offline
>[154221.677974] Broke affinity for irq 44
>[154221.679162] smpboot: CPU 2 is now offline
>[154221.679900] Broke affinity for irq 23
>[154221.680931] smpboot: CPU 3 is now offline
>[154221.681372] Extended CMOS year: 2000
>[154221.682407] ACPI: Low-level resume complete
>[154221.682468] PM: Restoring platform NVS memory
>[154221.683201] Extended CMOS year: 2000
>[154221.683290] Enabling non-boot CPUs ...
>[154221.683407] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[154221.704890] CPU1 is up
>[154221.704949] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[154221.725831] CPU2 is up
>[154221.725898] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[154221.746792] CPU3 is up
>[154221.749748] ACPI: Waking up from system sleep state S3
>[154221.850505] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[154221.861480] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[154221.872693] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[154221.883423] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[154221.894495] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[154221.949409] PM: noirq resume of devices complete after 121.198 msecs
>[154221.949471] PM: early resume of devices complete after 0.033 msecs
>[154221.949517] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[154221.949553] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[154221.949647] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[154221.949649] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[154221.949695] pci 0000:00:1e.0: setting latency timer to 64
>[154221.949720] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[154221.949721] ahci 0000:00:1f.2: setting latency timer to 64
>[154221.949754] [drm] nouveau 0000:01:00.0: POSTing device...
>[154221.949756] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[154221.949773] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[154221.950213] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[154221.990634] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[154222.018409] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[154222.018449] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[154222.019513] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[154222.019514] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[154222.039501] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[154222.181804] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[154222.256460] ata6: SATA link down (SStatus 0 SControl 300)
>[154222.258457] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[154222.301878] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[154222.322836] [drm] nouveau 0000:01:00.0: Restoring mode...
>[154222.339419] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[154222.449011] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[154222.455808] ata5: SATA link down (SStatus 0 SControl 300)
>[154222.456137] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[154222.456502] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[154222.461207] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[154222.461529] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[154222.463235] ata2.00: configured for UDMA/100
>[154222.499821] firewire_core 0000:0d:00.3: rediscovered device fw0
>[154222.831261] mei 0000:00:16.0: wd: unable to register watchdog device.
>[154224.235493] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[154224.247082] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[154224.247086] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[154224.247355] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[154224.247358] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[154224.250289] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[154224.250293] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[154224.250547] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[154224.250551] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[154224.251838] ata1.00: configured for UDMA/100
>[154224.251962] sd 0:0:0:0: [sda] Starting disk
>[154224.272941] PM: resume of devices complete after 2329.346 msecs
>[154224.273060] PM: Finishing wakeup.
>[154224.273061] Restarting tasks ... done.
>[154224.282599] video LNXVIDEO:01: Restoring backlight state
>[154224.452229] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[154224.552759] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[154224.552931] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[154224.555336] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[154224.555669] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[154224.669413] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[154224.682390] usb 1-1.4: new full-speed USB device number 42 using ehci_hcd
>[154224.771548] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[154224.771552] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[154224.771554] usb 1-1.4: Product: Broadcom Bluetooth Device
>[154224.771555] usb 1-1.4: Manufacturer: Broadcom Corp
>[154224.771556] usb 1-1.4: SerialNumber: 78DD08A62030
>[154229.976607] wlan0: authenticate with 00:19:5b:50:46:9d
>[154229.985709] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[154230.015923] wlan0: authenticated
>[154230.016780] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[154230.022518] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=12)
>[154230.024665] wlan0: associated
>[154230.024701] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[155517.159160] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[155517.207662] cfg80211: Calling CRDA to update world regulatory domain
>[155517.232978] cfg80211: World regulatory domain updated:
>[155517.232983] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[155517.232985] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[155517.232987] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[155517.232989] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[155517.232991] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[155517.232992] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[155517.233011] cfg80211: Calling CRDA for country: US
>[155517.238105] cfg80211: Regulatory domain changed to country: US
>[155517.238109] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[155517.238111] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[155517.238113] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[155517.238115] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[155517.238117] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[155517.238119] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[155517.238120] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[155517.903949] usb 1-1.4: USB disconnect, device number 42
>[155518.468416] PM: Syncing filesystems ... done.
>[155518.688215] PM: Preparing system for mem sleep
>[155519.036659] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[155519.048085] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[155519.059016] PM: Entering mem sleep
>[155519.059155] Suspending console(s) (use no_console_suspend to debug)
>[155519.247275] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[155519.247351] sd 0:0:0:0: [sda] Stopping disk
>[155519.306237] [drm] nouveau 0000:01:00.0: Disabling display...
>[155519.307428] ACPI handle has no context!
>[155519.331066] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[155519.868073] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[155519.868080] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[155519.868158] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[155520.987337] [drm] nouveau 0000:01:00.0: Idling channels...
>[155520.988155] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[155524.748158] [drm] nouveau 0000:01:00.0: And we're gone!
>[155524.758589] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[155524.758718] PM: suspend of devices complete after 5713.844 msecs
>[155524.758930] PM: late suspend of devices complete after 0.210 msecs
>[155524.769625] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[155524.780425] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[155524.780671] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[155524.791392] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[155524.802472] PM: noirq suspend of devices complete after 43.650 msecs
>[155524.802911] ACPI: Preparing to enter system sleep state S3
>[155524.852272] PM: Saving platform NVS memory
>[155524.854832] Disabling non-boot CPUs ...
>[155524.856444] smpboot: CPU 1 is now offline
>[155524.857126] Broke affinity for irq 44
>[155524.858312] smpboot: CPU 2 is now offline
>[155524.858996] Broke affinity for irq 23
>[155524.860016] smpboot: CPU 3 is now offline
>[155524.860435] Extended CMOS year: 2000
>[155524.861471] ACPI: Low-level resume complete
>[155524.861532] PM: Restoring platform NVS memory
>[155524.862268] Extended CMOS year: 2000
>[155524.862357] Enabling non-boot CPUs ...
>[155524.862493] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[155524.885071] CPU1 is up
>[155524.885141] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[155524.906018] CPU2 is up
>[155524.906093] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[155524.926966] CPU3 is up
>[155524.929940] ACPI: Waking up from system sleep state S3
>[155525.030689] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[155525.041665] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[155525.052875] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[155525.063607] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[155525.074680] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[155525.129597] PM: noirq resume of devices complete after 121.201 msecs
>[155525.129695] PM: early resume of devices complete after 0.035 msecs
>[155525.129731] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[155525.129769] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[155525.129826] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[155525.129915] pci 0000:00:1e.0: setting latency timer to 64
>[155525.129939] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[155525.129945] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[155525.129946] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[155525.129948] ahci 0000:00:1f.2: setting latency timer to 64
>[155525.129974] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[155525.130003] [drm] nouveau 0000:01:00.0: POSTing device...
>[155525.130005] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[155525.170717] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[155525.198492] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[155525.198531] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[155525.199596] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[155525.199597] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[155525.219585] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[155525.361917] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[155525.436665] ata5: SATA link down (SStatus 0 SControl 300)
>[155525.438648] ata6: SATA link down (SStatus 0 SControl 300)
>[155525.440644] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[155525.486398] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[155525.507358] [drm] nouveau 0000:01:00.0: Restoring mode...
>[155525.519711] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[155525.617953] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[155525.618783] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[155525.629196] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[155525.632924] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[155525.633333] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[155525.635106] ata2.00: configured for UDMA/100
>[155526.007221] firewire_core 0000:0d:00.3: rediscovered device fw0
>[155526.008015] mei 0000:00:16.0: wd: unable to register watchdog device.
>[155527.418665] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[155527.427125] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[155527.427128] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[155527.427421] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[155527.427425] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[155527.430261] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[155527.430266] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[155527.430543] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[155527.430547] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[155527.431904] ata1.00: configured for UDMA/100
>[155527.432134] sd 0:0:0:0: [sda] Starting disk
>[155527.453032] PM: resume of devices complete after 2329.217 msecs
>[155527.453176] PM: Finishing wakeup.
>[155527.453176] Restarting tasks ... done.
>[155527.475668] video LNXVIDEO:01: Restoring backlight state
>[155527.670294] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[155527.770827] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[155527.770988] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[155527.772976] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[155527.773287] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[155527.888361] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[155528.117016] usb 1-1.4: new full-speed USB device number 43 using ehci_hcd
>[155528.207291] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[155528.207295] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[155528.207297] usb 1-1.4: Product: Broadcom Bluetooth Device
>[155528.207298] usb 1-1.4: Manufacturer: Broadcom Corp
>[155528.207300] usb 1-1.4: SerialNumber: 78DD08A62030
>[155533.190545] wlan0: authenticate with 00:19:5b:50:46:9d
>[155533.203378] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[155533.205223] wlan0: authenticated
>[155533.205958] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[155533.209179] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=12)
>[155533.211654] wlan0: associated
>[155533.211698] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[155577.262730] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[155577.301253] cfg80211: Calling CRDA to update world regulatory domain
>[155577.326037] cfg80211: World regulatory domain updated:
>[155577.326041] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[155577.326043] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[155577.326045] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[155577.326046] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[155577.326048] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[155577.326049] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[155577.326068] cfg80211: Calling CRDA for country: US
>[155577.331260] cfg80211: Regulatory domain changed to country: US
>[155577.331264] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[155577.331266] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[155577.331267] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[155577.331269] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[155577.331270] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[155577.331272] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[155577.331273] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[155577.991364] usb 1-1.4: USB disconnect, device number 43
>[155578.355940] PM: Syncing filesystems ... done.
>[155578.534994] PM: Preparing system for mem sleep
>[155578.870583] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[155578.882028] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[155578.892976] PM: Entering mem sleep
>[155578.893114] Suspending console(s) (use no_console_suspend to debug)
>[155579.083190] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[155579.083966] sd 0:0:0:0: [sda] Stopping disk
>[155579.143539] [drm] nouveau 0000:01:00.0: Disabling display...
>[155579.145049] ACPI handle has no context!
>[155579.169832] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[155579.701950] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[155579.701966] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[155579.702045] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[155580.561511] [drm] nouveau 0000:01:00.0: Idling channels...
>[155580.562299] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[155584.320618] [drm] nouveau 0000:01:00.0: And we're gone!
>[155584.331244] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[155584.331461] PM: suspend of devices complete after 5457.937 msecs
>[155584.331690] PM: late suspend of devices complete after 0.227 msecs
>[155584.342262] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[155584.353052] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[155584.353297] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[155584.364012] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[155584.375080] PM: noirq suspend of devices complete after 43.537 msecs
>[155584.375524] ACPI: Preparing to enter system sleep state S3
>[155584.424831] PM: Saving platform NVS memory
>[155584.427288] Disabling non-boot CPUs ...
>[155584.428896] smpboot: CPU 1 is now offline
>[155584.429531] Broke affinity for irq 44
>[155584.430552] smpboot: CPU 2 is now offline
>[155584.431230] Broke affinity for irq 23
>[155584.432251] smpboot: CPU 3 is now offline
>[155584.432692] Extended CMOS year: 2000
>[155584.433725] ACPI: Low-level resume complete
>[155584.433787] PM: Restoring platform NVS memory
>[155584.434519] Extended CMOS year: 2000
>[155584.434624] Enabling non-boot CPUs ...
>[155584.434740] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[155584.456602] CPU1 is up
>[155584.456667] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[155584.477526] CPU2 is up
>[155584.477601] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[155584.498457] CPU3 is up
>[155584.501419] ACPI: Waking up from system sleep state S3
>[155584.602094] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[155584.613060] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[155584.624263] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[155584.634983] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[155584.646044] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[155584.700908] PM: noirq resume of devices complete after 121.208 msecs
>[155584.700969] PM: early resume of devices complete after 0.033 msecs
>[155584.701016] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[155584.701044] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[155584.701145] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[155584.701195] pci 0000:00:1e.0: setting latency timer to 64
>[155584.701200] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[155584.701219] ahci 0000:00:1f.2: setting latency timer to 64
>[155584.701239] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[155584.701252] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[155584.701253] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[155584.701284] [drm] nouveau 0000:01:00.0: POSTing device...
>[155584.701286] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[155584.742135] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[155584.769910] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[155584.769949] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[155584.771015] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[155584.771015] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[155584.791004] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[155584.933010] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[155585.007686] ata6: SATA link down (SStatus 0 SControl 300)
>[155585.009678] ata5: SATA link down (SStatus 0 SControl 300)
>[155585.011673] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[155585.057998] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[155585.078960] [drm] nouveau 0000:01:00.0: Restoring mode...
>[155585.090529] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[155585.182660] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[155585.183498] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[155585.197705] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[155585.198135] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[155585.199877] ata2.00: configured for UDMA/100
>[155585.200068] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[155585.577765] firewire_core 0000:0d:00.3: rediscovered device fw0
>[155585.580758] mei 0000:00:16.0: wd: unable to register watchdog device.
>[155586.988104] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[155586.999183] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[155586.999187] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[155586.999469] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[155586.999473] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[155587.002448] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[155587.002452] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[155587.002738] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[155587.002741] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[155587.004082] ata1.00: configured for UDMA/100
>[155587.004280] sd 0:0:0:0: [sda] Starting disk
>[155587.033419] PM: resume of devices complete after 2340.299 msecs
>[155587.033566] PM: Finishing wakeup.
>[155587.033567] Restarting tasks ... done.
>[155587.053995] video LNXVIDEO:01: Restoring backlight state
>[155587.254053] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[155587.354899] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[155587.355075] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[155587.357148] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[155587.359878] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[155587.472118] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[155587.688852] usb 1-1.4: new full-speed USB device number 44 using ehci_hcd
>[155587.777350] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[155587.777354] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[155587.777356] usb 1-1.4: Product: Broadcom Bluetooth Device
>[155587.777358] usb 1-1.4: Manufacturer: Broadcom Corp
>[155587.777360] usb 1-1.4: SerialNumber: 78DD08A62030
>[155592.795654] wlan0: authenticate with 00:19:5b:50:46:9d
>[155592.805179] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[155592.807091] wlan0: authenticated
>[155592.807494] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[155592.810843] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=12)
>[155592.813323] wlan0: associated
>[155592.813364] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[156060.571300] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[156060.612471] cfg80211: Calling CRDA to update world regulatory domain
>[156060.658085] cfg80211: World regulatory domain updated:
>[156060.658089] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[156060.658091] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156060.658093] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[156060.658094] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[156060.658096] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156060.658097] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156060.658114] cfg80211: Calling CRDA for country: US
>[156060.661010] cfg80211: Regulatory domain changed to country: US
>[156060.661014] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[156060.661016] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[156060.661018] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[156060.661019] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156060.661021] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156060.661022] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156060.661023] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[156061.460309] usb 1-1.4: USB disconnect, device number 44
>[156061.837207] PM: Syncing filesystems ... done.
>[156062.008080] PM: Preparing system for mem sleep
>[156062.347579] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[156062.358456] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[156062.369514] PM: Entering mem sleep
>[156062.369662] Suspending console(s) (use no_console_suspend to debug)
>[156062.557946] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[156062.558031] sd 0:0:0:0: [sda] Stopping disk
>[156062.621373] [drm] nouveau 0000:01:00.0: Disabling display...
>[156062.622912] ACPI handle has no context!
>[156062.646498] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[156063.178834] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[156063.178841] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[156063.178901] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[156064.029405] [drm] nouveau 0000:01:00.0: Idling channels...
>[156064.030141] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[156067.764412] [drm] nouveau 0000:01:00.0: And we're gone!
>[156067.774825] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[156067.775071] PM: suspend of devices complete after 5418.929 msecs
>[156067.775293] PM: late suspend of devices complete after 0.220 msecs
>[156067.785857] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[156067.796656] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[156067.796902] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[156067.807627] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[156067.818702] PM: noirq suspend of devices complete after 43.516 msecs
>[156067.819153] ACPI: Preparing to enter system sleep state S3
>[156067.868508] PM: Saving platform NVS memory
>[156067.871157] Disabling non-boot CPUs ...
>[156067.872755] smpboot: CPU 1 is now offline
>[156067.873392] Broke affinity for irq 44
>[156067.874580] smpboot: CPU 2 is now offline
>[156067.875215] Broke affinity for irq 23
>[156067.876234] smpboot: CPU 3 is now offline
>[156067.876643] Extended CMOS year: 2000
>[156067.877677] ACPI: Low-level resume complete
>[156067.877739] PM: Restoring platform NVS memory
>[156067.878470] Extended CMOS year: 2000
>[156067.878562] Enabling non-boot CPUs ...
>[156067.878695] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[156067.900307] CPU1 is up
>[156067.900366] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[156067.921250] CPU2 is up
>[156067.921316] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[156067.942202] CPU3 is up
>[156067.945195] ACPI: Waking up from system sleep state S3
>[156068.045922] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[156068.056896] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[156068.068108] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[156068.078841] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[156068.089912] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[156068.144826] PM: noirq resume of devices complete after 121.198 msecs
>[156068.144888] PM: early resume of devices complete after 0.033 msecs
>[156068.144931] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[156068.144968] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[156068.145039] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[156068.145043] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[156068.145082] pci 0000:00:1e.0: setting latency timer to 64
>[156068.145108] ahci 0000:00:1f.2: setting latency timer to 64
>[156068.145135] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[156068.145194] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[156068.145221] [drm] nouveau 0000:01:00.0: POSTing device...
>[156068.145223] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[156068.145361] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[156068.185949] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[156068.213724] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[156068.213764] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[156068.214829] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[156068.214829] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[156068.234817] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[156068.377198] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[156068.449906] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[156068.452260] ata5: SATA link down (SStatus 0 SControl 300)
>[156068.455866] ata6: SATA link down (SStatus 0 SControl 300)
>[156068.493780] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[156068.514742] [drm] nouveau 0000:01:00.0: Restoring mode...
>[156068.534796] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[156068.634189] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[156068.635022] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[156068.644457] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[156068.649164] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[156068.649579] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[156068.651365] ata2.00: configured for UDMA/100
>[156068.699316] firewire_core 0000:0d:00.3: rediscovered device fw0
>[156069.032098] mei 0000:00:16.0: wd: unable to register watchdog device.
>[156070.396002] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[156070.402534] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[156070.402538] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[156070.402807] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[156070.402810] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[156070.405636] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[156070.405640] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[156070.405915] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[156070.405918] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[156070.407273] ata1.00: configured for UDMA/100
>[156070.407445] sd 0:0:0:0: [sda] Starting disk
>[156070.428278] PM: resume of devices complete after 2289.162 msecs
>[156070.428425] PM: Finishing wakeup.
>[156070.428425] Restarting tasks ... done.
>[156070.445554] video LNXVIDEO:01: Restoring backlight state
>[156070.624593] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[156070.726216] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[156070.726382] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[156070.728200] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[156070.728511] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[156070.844810] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[156070.877747] usb 1-1.4: new full-speed USB device number 45 using ehci_hcd
>[156070.966539] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[156070.966547] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[156070.966553] usb 1-1.4: Product: Broadcom Bluetooth Device
>[156070.966558] usb 1-1.4: Manufacturer: Broadcom Corp
>[156070.966563] usb 1-1.4: SerialNumber: 78DD08A62030
>[156076.123287] wlan0: authenticate with 00:19:5b:50:46:9d
>[156076.135146] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[156076.136980] wlan0: authenticated
>[156076.160384] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[156076.163699] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=2)
>[156076.166276] wlan0: associated
>[156076.166343] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[156511.966685] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[156512.114147] cfg80211: Calling CRDA to update world regulatory domain
>[156512.143120] cfg80211: World regulatory domain updated:
>[156512.143124] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[156512.143126] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156512.143127] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[156512.143129] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[156512.143131] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156512.143132] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156512.143144] cfg80211: Calling CRDA for country: US
>[156512.145069] cfg80211: Regulatory domain changed to country: US
>[156512.145071] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[156512.145073] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[156512.145074] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[156512.145075] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156512.145076] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156512.145077] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156512.145078] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[156512.473364] usb 1-1.4: USB disconnect, device number 45
>[156513.788102] PM: Syncing filesystems ... done.
>[156514.438419] PM: Preparing system for mem sleep
>[156514.790243] Freezing user space processes ... (elapsed 0.11 seconds) done.
>[156514.899999] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[156514.910966] PM: Entering mem sleep
>[156514.911105] Suspending console(s) (use no_console_suspend to debug)
>[156515.098498] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[156515.098614] sd 0:0:0:0: [sda] Stopping disk
>[156515.161547] [drm] nouveau 0000:01:00.0: Disabling display...
>[156515.163422] ACPI handle has no context!
>[156515.186517] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[156515.721430] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[156515.721483] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[156515.721569] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[156516.625830] [drm] nouveau 0000:01:00.0: Idling channels...
>[156516.626620] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[156520.371829] [drm] nouveau 0000:01:00.0: And we're gone!
>[156520.382102] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[156520.382161] PM: suspend of devices complete after 5484.781 msecs
>[156520.382344] PM: late suspend of devices complete after 0.181 msecs
>[156520.393149] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[156520.403949] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[156520.404194] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[156520.414922] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[156520.426001] PM: noirq suspend of devices complete after 43.766 msecs
>[156520.426440] ACPI: Preparing to enter system sleep state S3
>[156520.475803] PM: Saving platform NVS memory
>[156520.478342] Disabling non-boot CPUs ...
>[156520.479973] smpboot: CPU 1 is now offline
>[156520.480651] Broke affinity for irq 44
>[156520.481672] smpboot: CPU 2 is now offline
>[156520.482333] Broke affinity for irq 23
>[156520.483357] smpboot: CPU 3 is now offline
>[156520.483800] Extended CMOS year: 2000
>[156520.484833] ACPI: Low-level resume complete
>[156520.484895] PM: Restoring platform NVS memory
>[156520.485626] Extended CMOS year: 2000
>[156520.485714] Enabling non-boot CPUs ...
>[156520.485849] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[156520.507599] CPU1 is up
>[156520.507662] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[156520.528540] CPU2 is up
>[156520.528609] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[156520.549491] CPU3 is up
>[156520.552449] ACPI: Waking up from system sleep state S3
>[156520.653214] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[156520.664189] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[156520.675400] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[156520.686133] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[156520.697205] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[156520.752118] PM: noirq resume of devices complete after 121.200 msecs
>[156520.752179] PM: early resume of devices complete after 0.033 msecs
>[156520.752214] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[156520.752255] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[156520.752304] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[156520.752323] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[156520.752333] pci 0000:00:1e.0: setting latency timer to 64
>[156520.752360] ahci 0000:00:1f.2: setting latency timer to 64
>[156520.752379] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[156520.752380] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[156520.752416] [drm] nouveau 0000:01:00.0: POSTing device...
>[156520.752419] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[156520.752477] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[156520.793112] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[156520.820887] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[156520.820925] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[156520.821991] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[156520.821991] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[156520.841979] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[156520.984512] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[156521.059180] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[156521.062167] ata6: SATA link down (SStatus 0 SControl 300)
>[156521.063153] ata5: SATA link down (SStatus 0 SControl 300)
>[156521.103257] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[156521.124215] [drm] nouveau 0000:01:00.0: Restoring mode...
>[156521.142284] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[156521.241275] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[156521.242078] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[156521.251702] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[156521.256243] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[156521.256685] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[156521.258435] ata2.00: configured for UDMA/100
>[156521.306587] firewire_core 0000:0d:00.3: rediscovered device fw0
>[156521.639889] mei 0000:00:16.0: wd: unable to register watchdog device.
>[156523.057138] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[156523.061235] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[156523.061239] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[156523.061500] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[156523.061504] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[156523.064170] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[156523.064174] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[156523.064419] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[156523.064422] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[156523.065655] ata1.00: configured for UDMA/100
>[156523.065786] sd 0:0:0:0: [sda] Starting disk
>[156523.086970] PM: resume of devices complete after 2340.708 msecs
>[156523.087124] PM: Finishing wakeup.
>[156523.087124] Restarting tasks ... done.
>[156523.115944] video LNXVIDEO:01: Restoring backlight state
>[156523.294743] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[156523.395313] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[156523.395466] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[156523.396858] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[156523.397165] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[156523.509837] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[156523.740433] usb 1-1.4: new full-speed USB device number 46 using ehci_hcd
>[156523.830249] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[156523.830253] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[156523.830256] usb 1-1.4: Product: Broadcom Bluetooth Device
>[156523.830258] usb 1-1.4: Manufacturer: Broadcom Corp
>[156523.830260] usb 1-1.4: SerialNumber: 78DD08A62030
>[156528.835789] wlan0: authenticate with 00:19:5b:50:46:9d
>[156528.845217] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[156528.847297] wlan0: authenticated
>[156528.848401] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[156528.851637] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=2)
>[156528.854019] wlan0: associated
>[156528.854047] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[156593.922555] thinkpad_acpi: EC reports that Thermal Table has changed
>[156612.142519] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[156612.214820] cfg80211: Calling CRDA to update world regulatory domain
>[156612.247151] cfg80211: World regulatory domain updated:
>[156612.247156] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[156612.247158] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156612.247160] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[156612.247162] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[156612.247164] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156612.247165] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156612.247183] cfg80211: Calling CRDA for country: US
>[156612.251196] cfg80211: Regulatory domain changed to country: US
>[156612.251202] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[156612.251204] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[156612.251207] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[156612.251209] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156612.251210] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156612.251211] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[156612.251213] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[156612.939283] usb 1-1.4: USB disconnect, device number 46
>[156613.174608] PM: Syncing filesystems ... done.
>[156613.370655] PM: Preparing system for mem sleep
>[156613.711825] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[156613.722749] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[156613.733670] PM: Entering mem sleep
>[156613.733800] Suspending console(s) (use no_console_suspend to debug)
>[156613.921702] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[156613.921847] sd 0:0:0:0: [sda] Stopping disk
>[156613.982653] [drm] nouveau 0000:01:00.0: Disabling display...
>[156613.983707] ACPI handle has no context!
>[156614.007952] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[156614.543252] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[156614.543255] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[156614.543315] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[156615.520013] [drm] nouveau 0000:01:00.0: Idling channels...
>[156615.520786] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[156616.579221] thinkpad_acpi: EC reports that Thermal Table has changed
>[156619.270364] [drm] nouveau 0000:01:00.0: And we're gone!
>[156619.281031] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[156619.281169] PM: suspend of devices complete after 5567.815 msecs
>[156619.281370] PM: late suspend of devices complete after 0.199 msecs
>[156619.292097] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[156619.302881] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[156619.303126] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[156619.313840] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[156619.324910] PM: noirq suspend of devices complete after 43.690 msecs
>[156619.325352] ACPI: Preparing to enter system sleep state S3
>[156619.374654] PM: Saving platform NVS memory
>[156619.377306] Disabling non-boot CPUs ...
>[156619.378914] smpboot: CPU 1 is now offline
>[156619.379574] Broke affinity for irq 44
>[156619.380753] smpboot: CPU 2 is now offline
>[156619.381407] Broke affinity for irq 23
>[156619.382442] smpboot: CPU 3 is now offline
>[156619.382880] Extended CMOS year: 2000
>[156619.383915] ACPI: Low-level resume complete
>[156619.383976] PM: Restoring platform NVS memory
>[156619.384699] Extended CMOS year: 2000
>[156619.384790] Enabling non-boot CPUs ...
>[156619.384909] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[156619.407416] CPU1 is up
>[156619.407476] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[156619.428336] CPU2 is up
>[156619.428404] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[156619.449267] CPU3 is up
>[156619.452237] ACPI: Waking up from system sleep state S3
>[156619.552900] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[156619.563865] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[156619.575065] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[156619.585788] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[156619.596847] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[156619.651710] PM: noirq resume of devices complete after 121.207 msecs
>[156619.651771] PM: early resume of devices complete after 0.033 msecs
>[156619.651817] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[156619.651886] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[156619.651906] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[156619.651967] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[156619.652006] pci 0000:00:1e.0: setting latency timer to 64
>[156619.652018] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[156619.652024] ahci 0000:00:1f.2: setting latency timer to 64
>[156619.652050] [drm] nouveau 0000:01:00.0: POSTing device...
>[156619.652053] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[156619.652054] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[156619.652130] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[156619.692775] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[156619.720549] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[156619.720589] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[156619.721654] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[156619.721655] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[156619.741645] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[156619.883766] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[156619.958464] ata6: SATA link down (SStatus 0 SControl 300)
>[156619.960454] ata5: SATA link down (SStatus 0 SControl 300)
>[156619.962455] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[156619.999860] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[156620.020818] [drm] nouveau 0000:01:00.0: Restoring mode...
>[156620.041434] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[156620.141752] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[156620.142548] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[156620.150814] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[156620.156707] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[156620.157123] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[156620.158834] ata2.00: configured for UDMA/100
>[156620.204714] firewire_core 0000:0d:00.3: rediscovered device fw0
>[156620.537934] mei 0000:00:16.0: wd: unable to register watchdog device.
>[156621.951714] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[156621.956668] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[156621.956671] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[156621.956935] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[156621.956938] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[156621.959752] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[156621.959756] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[156621.960030] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[156621.960033] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[156621.961423] ata1.00: configured for UDMA/100
>[156621.961560] sd 0:0:0:0: [sda] Starting disk
>[156621.982295] PM: resume of devices complete after 2338.476 msecs
>[156621.982437] PM: Finishing wakeup.
>[156621.982437] Restarting tasks ... done.
>[156622.001704] video LNXVIDEO:01: Restoring backlight state
>[156622.185200] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[156622.285662] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[156622.285823] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[156622.287920] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[156622.288236] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[156622.408903] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[156622.639480] usb 1-1.4: new full-speed USB device number 47 using ehci_hcd
>[156622.728024] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[156622.728028] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[156622.728030] usb 1-1.4: Product: Broadcom Bluetooth Device
>[156622.728042] usb 1-1.4: Manufacturer: Broadcom Corp
>[156622.728045] usb 1-1.4: SerialNumber: 78DD08A62030
>[156627.655840] wlan0: authenticate with 00:19:5b:50:46:9d
>[156627.664780] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[156627.666681] wlan0: authenticated
>[156627.667285] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[156627.670518] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=2)
>[156627.673106] wlan0: associated
>[156627.673154] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[167800.286288] thinkpad_acpi: EC reports that Thermal Table has changed
>[168082.372858] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[168082.410480] cfg80211: Calling CRDA to update world regulatory domain
>[168082.449306] cfg80211: World regulatory domain updated:
>[168082.449310] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[168082.449313] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[168082.449315] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[168082.449316] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[168082.449318] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[168082.449320] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[168082.449332] cfg80211: Calling CRDA for country: US
>[168082.451599] cfg80211: Regulatory domain changed to country: US
>[168082.451603] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[168082.451604] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[168082.451606] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[168082.451607] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[168082.451608] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[168082.451609] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[168082.451611] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[168083.275207] usb 1-1.4: USB disconnect, device number 47
>[168083.597757] PM: Syncing filesystems ... done.
>[168083.602203] PM: Preparing system for mem sleep
>[168083.947870] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[168083.959417] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[168083.970402] PM: Entering mem sleep
>[168083.970537] Suspending console(s) (use no_console_suspend to debug)
>[168084.178780] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[168084.178869] sd 0:0:0:0: [sda] Stopping disk
>[168084.240583] [drm] nouveau 0000:01:00.0: Disabling display...
>[168084.241688] ACPI handle has no context!
>[168084.265197] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[168084.795935] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[168084.795958] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[168084.796038] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[168085.671699] [drm] nouveau 0000:01:00.0: Idling channels...
>[168085.672438] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[168089.360953] [drm] nouveau 0000:01:00.0: And we're gone!
>[168089.371660] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[168089.371925] PM: suspend of devices complete after 5414.909 msecs
>[168089.372147] PM: late suspend of devices complete after 0.219 msecs
>[168089.382732] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[168089.393534] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[168089.393777] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[168089.404504] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[168089.415575] PM: noirq suspend of devices complete after 43.536 msecs
>[168089.416030] ACPI: Preparing to enter system sleep state S3
>[168089.463389] PM: Saving platform NVS memory
>[168089.466380] Disabling non-boot CPUs ...
>[168089.467732] smpboot: CPU 1 is now offline
>[168089.468503] Broke affinity for irq 44
>[168089.469682] smpboot: CPU 2 is now offline
>[168089.470363] Broke affinity for irq 23
>[168089.471388] smpboot: CPU 3 is now offline
>[168089.471830] Extended CMOS year: 2000
>[168089.472864] ACPI: Low-level resume complete
>[168089.472925] PM: Restoring platform NVS memory
>[168089.473648] Extended CMOS year: 2000
>[168089.473740] Enabling non-boot CPUs ...
>[168089.473868] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[168089.492202] CPU1 is up
>[168089.492258] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[168089.509154] CPU2 is up
>[168089.509214] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[168089.526117] CPU3 is up
>[168089.529249] ACPI: Waking up from system sleep state S3
>[168089.625834] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[168089.636809] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[168089.648020] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[168089.658753] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[168089.669823] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[168089.724736] PM: noirq resume of devices complete after 121.196 msecs
>[168089.724804] PM: early resume of devices complete after 0.038 msecs
>[168089.724847] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[168089.724888] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[168089.724950] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[168089.724988] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[168089.725016] pci 0000:00:1e.0: setting latency timer to 64
>[168089.725040] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[168089.725044] ahci 0000:00:1f.2: setting latency timer to 64
>[168089.725131] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[168089.725152] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[168089.725163] [drm] nouveau 0000:01:00.0: POSTing device...
>[168089.725165] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[168089.765982] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[168089.793758] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[168089.793797] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[168089.794863] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[168089.794863] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[168089.814852] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[168089.957016] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[168090.028810] ata5: SATA link down (SStatus 0 SControl 300)
>[168090.030749] ata6: SATA link down (SStatus 0 SControl 300)
>[168090.033777] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[168090.118344] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[168090.139210] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[168090.139286] [drm] nouveau 0000:01:00.0: Restoring mode...
>[168090.218075] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[168090.218930] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[168090.224319] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[168090.233070] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[168090.233514] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[168090.235261] ata2.00: configured for UDMA/100
>[168090.279210] firewire_core 0000:0d:00.3: rediscovered device fw0
>[168090.620590] mei 0000:00:16.0: wd: unable to register watchdog device.
>[168092.020794] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[168092.031387] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[168092.031391] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[168092.031700] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[168092.031704] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[168092.034555] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[168092.034559] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[168092.034848] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[168092.034852] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[168092.036169] ata1.00: configured for UDMA/100
>[168092.036368] sd 0:0:0:0: [sda] Starting disk
>[168092.057400] PM: resume of devices complete after 2338.499 msecs
>[168092.057563] PM: Finishing wakeup.
>[168092.057563] Restarting tasks ... done.
>[168092.073882] video LNXVIDEO:01: Restoring backlight state
>[168092.259594] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[168092.359999] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[168092.360217] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[168092.363772] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[168092.364034] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[168092.483626] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[168092.712098] usb 1-1.4: new full-speed USB device number 48 using ehci_hcd
>[168092.801157] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[168092.801162] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[168092.801164] usb 1-1.4: Product: Broadcom Bluetooth Device
>[168092.801166] usb 1-1.4: Manufacturer: Broadcom Corp
>[168092.801167] usb 1-1.4: SerialNumber: 78DD08A62030
>[168097.831186] wlan0: authenticate with 00:19:5b:50:46:9d
>[168097.841647] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[168097.843546] wlan0: authenticated
>[168097.843964] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[168097.847199] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=2)
>[168097.849420] wlan0: associated
>[168097.849461] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[168367.265689] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[168367.317209] cfg80211: Calling CRDA to update world regulatory domain
>[168367.348865] cfg80211: World regulatory domain updated:
>[168367.348869] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[168367.348871] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[168367.348872] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[168367.348873] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[168367.348875] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[168367.348876] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[168367.348887] cfg80211: Calling CRDA for country: US
>[168367.350847] cfg80211: Regulatory domain changed to country: US
>[168367.350849] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[168367.350850] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[168367.350851] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[168367.350853] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[168367.350854] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[168367.350855] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[168367.350856] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[168368.069393] usb 1-1.4: USB disconnect, device number 48
>[168368.409142] PM: Syncing filesystems ... done.
>[168369.026149] PM: Preparing system for mem sleep
>[168369.157447] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[168369.168518] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[168369.179466] PM: Entering mem sleep
>[168369.179587] Suspending console(s) (use no_console_suspend to debug)
>[168369.369961] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[168369.370041] sd 0:0:0:0: [sda] Stopping disk
>[168369.429293] [drm] nouveau 0000:01:00.0: Disabling display...
>[168369.430833] ACPI handle has no context!
>[168369.453904] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[168369.988610] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[168369.988622] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[168369.988706] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[168370.924574] [drm] nouveau 0000:01:00.0: Idling channels...
>[168370.925349] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[168374.601035] [drm] nouveau 0000:01:00.0: And we're gone!
>[168374.611826] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[168374.612093] PM: suspend of devices complete after 5445.958 msecs
>[168374.612315] PM: late suspend of devices complete after 0.220 msecs
>[168374.622944] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[168374.633713] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[168374.633955] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[168374.644684] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[168374.655740] PM: noirq suspend of devices complete after 43.531 msecs
>[168374.656192] ACPI: Preparing to enter system sleep state S3
>[168374.703559] PM: Saving platform NVS memory
>[168374.706458] Disabling non-boot CPUs ...
>[168374.707838] smpboot: CPU 1 is now offline
>[168374.708633] Broke affinity for irq 44
>[168374.709818] smpboot: CPU 2 is now offline
>[168374.710540] Broke affinity for irq 23
>[168374.711566] smpboot: CPU 3 is now offline
>[168374.712008] Extended CMOS year: 2000
>[168374.713043] ACPI: Low-level resume complete
>[168374.713105] PM: Restoring platform NVS memory
>[168374.713837] Extended CMOS year: 2000
>[168374.713930] Enabling non-boot CPUs ...
>[168374.714061] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[168374.732379] CPU1 is up
>[168374.732435] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[168374.749334] CPU2 is up
>[168374.749394] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[168374.766295] CPU3 is up
>[168374.769389] ACPI: Waking up from system sleep state S3
>[168374.866017] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[168374.876992] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[168374.888202] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[168374.898935] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[168374.910004] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[168374.964921] PM: noirq resume of devices complete after 121.198 msecs
>[168374.964989] PM: early resume of devices complete after 0.038 msecs
>[168374.965033] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[168374.965067] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[168374.965122] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[168374.965128] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[168374.965155] pci 0000:00:1e.0: setting latency timer to 64
>[168374.965176] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[168374.965180] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[168374.965182] ahci 0000:00:1f.2: setting latency timer to 64
>[168374.965211] [drm] nouveau 0000:01:00.0: POSTing device...
>[168374.965213] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[168374.965359] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[168375.005917] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[168375.033693] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[168375.033732] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[168375.034797] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[168375.034797] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[168375.054786] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[168375.197286] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[168375.271996] ata5: SATA link down (SStatus 0 SControl 300)
>[168375.273996] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[168375.276436] ata6: SATA link down (SStatus 0 SControl 300)
>[168375.354857] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[168375.358821] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[168375.379766] [drm] nouveau 0000:01:00.0: Restoring mode...
>[168375.464518] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[168375.467844] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[168375.468708] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[168375.482879] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[168375.483285] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[168375.485022] ata2.00: configured for UDMA/100
>[168375.515416] firewire_core 0000:0d:00.3: rediscovered device fw0
>[168375.867007] mei 0000:00:16.0: wd: unable to register watchdog device.
>[168377.261038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[168377.272857] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[168377.272861] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[168377.273145] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[168377.273149] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[168377.276073] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[168377.276077] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[168377.276352] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[168377.276355] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[168377.277737] ata1.00: configured for UDMA/100
>[168377.277917] sd 0:0:0:0: [sda] Starting disk
>[168377.298687] PM: resume of devices complete after 2339.541 msecs
>[168377.298891] PM: Finishing wakeup.
>[168377.298891] Restarting tasks ... done.
>[168377.320923] video LNXVIDEO:01: Restoring backlight state
>[168377.515608] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[168377.616209] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[168377.616390] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[168377.617805] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[168377.618130] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[168377.732944] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[168377.919871] thinkpad_acpi: EC reports that Thermal Table has changed
>[168377.953329] usb 1-1.4: new full-speed USB device number 49 using ehci_hcd
>[168378.041969] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[168378.041974] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[168378.041976] usb 1-1.4: Product: Broadcom Bluetooth Device
>[168378.041988] usb 1-1.4: Manufacturer: Broadcom Corp
>[168378.041989] usb 1-1.4: SerialNumber: 78DD08A62030
>[168383.113849] wlan0: authenticate with 00:19:5b:50:46:9d
>[168383.125548] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[168383.127443] wlan0: authenticated
>[168383.128285] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[168383.131544] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=2)
>[168383.133942] wlan0: associated
>[168383.133982] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[169839.755883] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[169839.801463] cfg80211: Calling CRDA to update world regulatory domain
>[169839.823798] cfg80211: World regulatory domain updated:
>[169839.823803] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[169839.823805] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169839.823807] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[169839.823808] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[169839.823809] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169839.823811] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169839.823829] cfg80211: Calling CRDA for country: US
>[169839.827652] cfg80211: Regulatory domain changed to country: US
>[169839.827656] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[169839.827658] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[169839.827659] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[169839.827661] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169839.827662] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169839.827664] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169839.827665] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[169840.478230] usb 1-1.4: USB disconnect, device number 49
>[169840.899405] PM: Syncing filesystems ... done.
>[169840.903999] PM: Preparing system for mem sleep
>[169841.248047] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[169841.259366] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[169841.270301] PM: Entering mem sleep
>[169841.270434] Suspending console(s) (use no_console_suspend to debug)
>[169841.458855] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[169841.458948] sd 0:0:0:0: [sda] Stopping disk
>[169841.521171] [drm] nouveau 0000:01:00.0: Disabling display...
>[169841.522648] ACPI handle has no context!
>[169841.555483] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[169842.079476] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[169842.079492] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[169842.079570] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[169842.949683] [drm] nouveau 0000:01:00.0: Idling channels...
>[169842.950471] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[169846.719641] [drm] nouveau 0000:01:00.0: And we're gone!
>[169846.730475] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[169846.730721] PM: suspend of devices complete after 5473.966 msecs
>[169846.730950] PM: late suspend of devices complete after 0.226 msecs
>[169846.741511] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[169846.752306] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[169846.752551] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[169846.763277] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[169846.774353] PM: noirq suspend of devices complete after 43.511 msecs
>[169846.774818] ACPI: Preparing to enter system sleep state S3
>[169846.824158] PM: Saving platform NVS memory
>[169846.826749] Disabling non-boot CPUs ...
>[169846.828350] smpboot: CPU 1 is now offline
>[169846.829018] Broke affinity for irq 44
>[169846.830205] smpboot: CPU 2 is now offline
>[169846.830943] Broke affinity for irq 23
>[169846.831974] smpboot: CPU 3 is now offline
>[169846.832446] Extended CMOS year: 2000
>[169846.833481] ACPI: Low-level resume complete
>[169846.833544] PM: Restoring platform NVS memory
>[169846.834274] Extended CMOS year: 2000
>[169846.834364] Enabling non-boot CPUs ...
>[169846.834483] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[169846.852965] CPU1 is up
>[169846.853022] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[169846.869917] CPU2 is up
>[169846.869984] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[169846.886876] CPU3 is up
>[169846.889845] ACPI: Waking up from system sleep state S3
>[169846.968698] thinkpad_acpi: EC reports that Thermal Table has changed
>[169847.011546] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[169847.022526] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[169847.033731] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[169847.044466] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[169847.055534] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[169847.110453] PM: noirq resume of devices complete after 121.199 msecs
>[169847.110520] PM: early resume of devices complete after 0.038 msecs
>[169847.110573] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[169847.110656] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[169847.110700] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[169847.110736] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[169847.110747] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[169847.110783] pci 0000:00:1e.0: setting latency timer to 64
>[169847.110806] ahci 0000:00:1f.2: setting latency timer to 64
>[169847.110828] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[169847.110859] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[169847.110862] [drm] nouveau 0000:01:00.0: POSTing device...
>[169847.110865] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[169847.151650] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[169847.179425] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[169847.179464] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[169847.180529] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[169847.180530] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[169847.200519] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[169847.342807] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[169847.417517] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[169847.420019] ata6: SATA link down (SStatus 0 SControl 300)
>[169847.424494] ata5: SATA link down (SStatus 0 SControl 300)
>[169847.500551] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[169847.521492] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[169847.521492] [drm] nouveau 0000:01:00.0: Restoring mode...
>[169847.586393] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[169847.587206] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[169847.601412] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[169847.601863] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[169847.603600] ata2.00: configured for UDMA/100
>[169847.610004] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[169847.660929] firewire_core 0000:0d:00.3: rediscovered device fw0
>[169847.980935] mei 0000:00:16.0: wd: unable to register watchdog device.
>[169849.403513] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[169849.414892] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[169849.414895] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[169849.415165] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[169849.415169] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[169849.418020] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[169849.418023] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[169849.418299] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[169849.418302] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[169849.419653] ata1.00: configured for UDMA/100
>[169849.419780] sd 0:0:0:0: [sda] Starting disk
>[169849.440756] PM: resume of devices complete after 2336.134 msecs
>[169849.440919] PM: Finishing wakeup.
>[169849.440920] Restarting tasks ... done.
>[169849.459707] video LNXVIDEO:01: Restoring backlight state
>[169849.687566] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[169849.787629] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[169849.787801] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[169849.790456] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[169849.790782] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[169849.908771] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[169850.098883] usb 1-1.4: new full-speed USB device number 50 using ehci_hcd
>[169850.187596] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[169850.187601] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[169850.187604] usb 1-1.4: Product: Broadcom Bluetooth Device
>[169850.187606] usb 1-1.4: Manufacturer: Broadcom Corp
>[169850.187608] usb 1-1.4: SerialNumber: 78DD08A62030
>[169855.326475] wlan0: authenticate with 00:19:5b:50:46:9d
>[169855.333294] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[169855.335178] wlan0: authenticated
>[169855.335496] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[169855.338799] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=5)
>[169855.341399] wlan0: associated
>[169855.341441] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[173035.194143] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[173035.226745] cfg80211: Calling CRDA to update world regulatory domain
>[173035.260545] cfg80211: World regulatory domain updated:
>[173035.260549] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[173035.260552] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[173035.260554] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[173035.260555] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[173035.260557] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[173035.260559] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[173035.260576] cfg80211: Calling CRDA for country: US
>[173035.265622] cfg80211: Regulatory domain changed to country: US
>[173035.265626] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[173035.265628] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[173035.265630] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[173035.265631] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[173035.265633] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[173035.265634] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[173035.265636] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[173036.048775] usb 1-1.4: USB disconnect, device number 50
>[173036.295206] PM: Syncing filesystems ... done.
>[173036.455236] PM: Preparing system for mem sleep
>[173036.814756] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[173036.825504] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[173036.836520] PM: Entering mem sleep
>[173036.836654] Suspending console(s) (use no_console_suspend to debug)
>[173037.025267] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[173037.025363] sd 0:0:0:0: [sda] Stopping disk
>[173037.084706] [drm] nouveau 0000:01:00.0: Disabling display...
>[173037.085918] ACPI handle has no context!
>[173037.109335] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[173037.646177] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[173037.646198] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[173037.646271] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[173038.587287] [drm] nouveau 0000:01:00.0: Idling channels...
>[173038.588061] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[173042.298089] [drm] nouveau 0000:01:00.0: And we're gone!
>[173042.308730] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[173042.308857] PM: suspend of devices complete after 5485.905 msecs
>[173042.309082] PM: late suspend of devices complete after 0.222 msecs
>[173042.319723] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[173042.330531] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[173042.330774] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[173042.341491] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[173042.352557] PM: noirq suspend of devices complete after 43.583 msecs
>[173042.353016] ACPI: Preparing to enter system sleep state S3
>[173042.400375] PM: Saving platform NVS memory
>[173042.403258] Disabling non-boot CPUs ...
>[173042.404878] smpboot: CPU 1 is now offline
>[173042.405561] Broke affinity for irq 44
>[173042.406739] smpboot: CPU 2 is now offline
>[173042.407467] Broke affinity for irq 23
>[173042.408486] smpboot: CPU 3 is now offline
>[173042.408973] Extended CMOS year: 2000
>[173042.410009] ACPI: Low-level resume complete
>[173042.410071] PM: Restoring platform NVS memory
>[173042.410795] Extended CMOS year: 2000
>[173042.410886] Enabling non-boot CPUs ...
>[173042.410999] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[173042.429192] CPU1 is up
>[173042.429249] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[173042.446142] CPU2 is up
>[173042.446198] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[173042.463102] CPU3 is up
>[173042.466214] ACPI: Waking up from system sleep state S3
>[173042.562822] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[173042.573802] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[173042.585006] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[173042.595740] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[173042.606811] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[173042.661725] PM: noirq resume of devices complete after 121.197 msecs
>[173042.661794] PM: early resume of devices complete after 0.038 msecs
>[173042.661846] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[173042.661915] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[173042.661932] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[173042.661984] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[173042.662018] pci 0000:00:1e.0: setting latency timer to 64
>[173042.662033] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[173042.662044] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[173042.662047] ahci 0000:00:1f.2: setting latency timer to 64
>[173042.662061] [drm] nouveau 0000:01:00.0: POSTing device...
>[173042.662063] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[173042.662230] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[173042.702767] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[173042.730542] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[173042.730582] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[173042.731647] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[173042.731647] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[173042.751637] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[173042.895087] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[173042.968770] ata6: SATA link down (SStatus 0 SControl 300)
>[173042.970765] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[173042.973200] ata5: SATA link down (SStatus 0 SControl 300)
>[173043.052680] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[173043.053460] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[173043.074399] [drm] nouveau 0000:01:00.0: Restoring mode...
>[173043.161341] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[173043.163357] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[173043.164189] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[173043.178336] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[173043.178801] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[173043.180615] ata2.00: configured for UDMA/100
>[173043.215195] firewire_core 0000:0d:00.3: rediscovered device fw0
>[173043.556899] mei 0000:00:16.0: wd: unable to register watchdog device.
>[173044.955786] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[173044.960876] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[173044.960879] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[173044.961161] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[173044.961164] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[173044.964061] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[173044.964065] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[173044.964350] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[173044.964354] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[173044.965703] ata1.00: configured for UDMA/100
>[173044.965873] sd 0:0:0:0: [sda] Starting disk
>[173044.986721] PM: resume of devices complete after 2330.813 msecs
>[173044.986887] PM: Finishing wakeup.
>[173044.986888] Restarting tasks ... done.
>[173044.998057] video LNXVIDEO:01: Restoring backlight state
>[173045.221222] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[173045.321909] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[173045.322128] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[173045.328473] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[173045.328804] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[173045.445914] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[173045.651035] usb 1-1.4: new full-speed USB device number 51 using ehci_hcd
>[173045.741043] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[173045.741049] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[173045.741053] usb 1-1.4: Product: Broadcom Bluetooth Device
>[173045.741056] usb 1-1.4: Manufacturer: Broadcom Corp
>[173045.741058] usb 1-1.4: SerialNumber: 78DD08A62030
>[173050.835454] wlan0: authenticate with 00:19:5b:50:46:9d
>[173050.846845] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[173050.848620] wlan0: authenticated
>[173050.849813] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[173050.853070] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=3)
>[173050.855345] wlan0: associated
>[173050.855395] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[178057.983915] thinkpad_acpi: EC reports that Thermal Table has changed
>[178905.982658] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[178906.039817] cfg80211: Calling CRDA to update world regulatory domain
>[178906.071854] cfg80211: World regulatory domain updated:
>[178906.071858] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[178906.071860] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[178906.071861] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[178906.071862] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[178906.071863] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[178906.071864] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[178906.071878] cfg80211: Calling CRDA for country: US
>[178906.073967] cfg80211: Regulatory domain changed to country: US
>[178906.073969] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[178906.073970] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[178906.073971] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[178906.073972] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[178906.073973] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[178906.073975] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[178906.073976] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[178906.751444] usb 1-1.4: USB disconnect, device number 51
>[178907.444498] PM: Syncing filesystems ... done.
>[178907.450046] PM: Preparing system for mem sleep
>[178907.795825] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[178907.807214] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[178907.818174] PM: Entering mem sleep
>[178907.818307] Suspending console(s) (use no_console_suspend to debug)
>[178908.016809] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[178908.016893] sd 0:0:0:0: [sda] Stopping disk
>[178908.080707] [drm] nouveau 0000:01:00.0: Disabling display...
>[178908.082497] ACPI handle has no context!
>[178908.105371] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[178908.643889] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[178908.643904] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[178908.644031] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[178909.710839] [drm] nouveau 0000:01:00.0: Idling channels...
>[178909.711636] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[178913.450050] [drm] nouveau 0000:01:00.0: And we're gone!
>[178913.460881] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[178913.460990] PM: suspend of devices complete after 5656.822 msecs
>[178913.461172] PM: late suspend of devices complete after 0.180 msecs
>[178913.471925] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[178913.482716] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[178913.482962] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[178913.493682] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[178913.504767] PM: noirq suspend of devices complete after 43.703 msecs
>[178913.505210] ACPI: Preparing to enter system sleep state S3
>[178913.554562] PM: Saving platform NVS memory
>[178913.557183] Disabling non-boot CPUs ...
>[178913.558801] smpboot: CPU 1 is now offline
>[178913.559477] Broke affinity for irq 44
>[178913.560658] smpboot: CPU 2 is now offline
>[178913.561366] Broke affinity for irq 23
>[178913.562388] smpboot: CPU 3 is now offline
>[178913.562826] Extended CMOS year: 2000
>[178913.563862] ACPI: Low-level resume complete
>[178913.563924] PM: Restoring platform NVS memory
>[178913.564662] Extended CMOS year: 2000
>[178913.564753] Enabling non-boot CPUs ...
>[178913.564889] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[178913.586370] CPU1 is up
>[178913.586430] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[178913.607309] CPU2 is up
>[178913.607379] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[178913.628269] CPU3 is up
>[178913.631221] ACPI: Waking up from system sleep state S3
>[178913.731982] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[178913.742958] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[178913.754169] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[178913.764904] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[178913.775976] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[178913.830887] PM: noirq resume of devices complete after 121.199 msecs
>[178913.830948] PM: early resume of devices complete after 0.033 msecs
>[178913.830994] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[178913.831101] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[178913.831110] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[178913.831155] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[178913.831211] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[178913.831219] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[178913.831234] pci 0000:00:1e.0: setting latency timer to 64
>[178913.831280] ahci 0000:00:1f.2: setting latency timer to 64
>[178913.831299] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[178913.831321] [drm] nouveau 0000:01:00.0: POSTing device...
>[178913.831324] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[178913.872098] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[178913.899872] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[178913.899911] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[178913.900975] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[178913.900976] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[178913.920963] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[178914.063273] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[178914.135956] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[178914.138311] ata5: SATA link down (SStatus 0 SControl 300)
>[178914.141938] ata6: SATA link down (SStatus 0 SControl 300)
>[178914.181533] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[178914.202491] [drm] nouveau 0000:01:00.0: Restoring mode...
>[178914.220905] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[178914.319162] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[178914.319990] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[178914.330491] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[178914.334137] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[178914.334553] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[178914.336303] ata2.00: configured for UDMA/100
>[178914.382363] firewire_core 0000:0d:00.3: rediscovered device fw0
>[178916.134921] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[178916.145049] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[178916.145053] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[178916.145315] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[178916.145319] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[178916.148278] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[178916.148282] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[178916.148567] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[178916.148570] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[178916.149887] ata1.00: configured for UDMA/100
>[178916.149998] sd 0:0:0:0: [sda] Starting disk
>[178916.170671] PM: resume of devices complete after 2345.646 msecs
>[178916.170798] PM: Finishing wakeup.
>[178916.170799] Restarting tasks ... done.
>[178916.201699] video LNXVIDEO:01: Restoring backlight state
>[178916.454196] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[178916.554890] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[178916.555107] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[178916.557722] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[178916.558021] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[178916.673473] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[178916.818196] usb 1-1.4: new full-speed USB device number 52 using ehci_hcd
>[178916.906726] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[178916.906732] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[178916.906735] usb 1-1.4: Product: Broadcom Bluetooth Device
>[178916.906737] usb 1-1.4: Manufacturer: Broadcom Corp
>[178916.906740] usb 1-1.4: SerialNumber: 78DD08A62030
>[178918.313780] mei 0000:00:16.0: wd: unable to register watchdog device.
>[178921.978370] wlan0: authenticate with 00:19:5b:50:46:9d
>[178921.986685] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[178921.988572] wlan0: authenticated
>[178921.989030] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[178921.992322] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=7)
>[178921.994765] wlan0: associated
>[178921.994809] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[180787.018402] thinkpad_acpi: EC reports that Thermal Table has changed
>[184444.110899] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[184444.153581] cfg80211: Calling CRDA to update world regulatory domain
>[184444.257493] cfg80211: World regulatory domain updated:
>[184444.257497] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[184444.257499] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[184444.257500] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[184444.257502] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[184444.257503] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[184444.257504] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[184444.257514] cfg80211: Calling CRDA for country: US
>[184444.260018] cfg80211: Regulatory domain changed to country: US
>[184444.260021] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[184444.260023] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[184444.260025] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[184444.260027] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[184444.260028] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[184444.260030] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[184444.260032] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[184445.186150] usb 1-1.4: USB disconnect, device number 52
>[184445.903686] PM: Syncing filesystems ... done.
>[184446.148374] PM: Preparing system for mem sleep
>[184446.485196] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[184446.496641] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[184446.507602] PM: Entering mem sleep
>[184446.507734] Suspending console(s) (use no_console_suspend to debug)
>[184446.699390] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[184446.699467] sd 0:0:0:0: [sda] Stopping disk
>[184446.758707] [drm] nouveau 0000:01:00.0: Disabling display...
>[184446.759997] ACPI handle has no context!
>[184446.783258] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[184447.316359] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[184447.316363] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[184447.316459] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[184448.399360] [drm] nouveau 0000:01:00.0: Idling channels...
>[184448.400097] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[184452.092272] [drm] nouveau 0000:01:00.0: And we're gone!
>[184452.102432] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[184452.102537] PM: suspend of devices complete after 5608.815 msecs
>[184452.102754] PM: late suspend of devices complete after 0.214 msecs
>[184452.113481] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[184452.124277] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[184452.124520] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[184452.135243] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[184452.146322] PM: noirq suspend of devices complete after 43.676 msecs
>[184452.146772] ACPI: Preparing to enter system sleep state S3
>[184452.194129] PM: Saving platform NVS memory
>[184452.197057] Disabling non-boot CPUs ...
>[184452.198657] smpboot: CPU 1 is now offline
>[184452.199404] Broke affinity for irq 44
>[184452.200424] smpboot: CPU 2 is now offline
>[184452.201124] Broke affinity for irq 23
>[184452.202152] smpboot: CPU 3 is now offline
>[184452.202626] Extended CMOS year: 2000
>[184452.203665] ACPI: Low-level resume complete
>[184452.203728] PM: Restoring platform NVS memory
>[184452.204459] Extended CMOS year: 2000
>[184452.204550] Enabling non-boot CPUs ...
>[184452.204661] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[184452.222956] CPU1 is up
>[184452.223013] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[184452.239907] CPU2 is up
>[184452.239968] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[184452.256865] CPU3 is up
>[184452.259971] ACPI: Waking up from system sleep state S3
>[184452.356586] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[184452.367563] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[184452.378768] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[184452.389505] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[184452.400573] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[184452.455488] PM: noirq resume of devices complete after 121.198 msecs
>[184452.455556] PM: early resume of devices complete after 0.038 msecs
>[184452.455602] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[184452.455669] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[184452.455721] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[184452.455784] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[184452.455790] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[184452.455815] pci 0000:00:1e.0: setting latency timer to 64
>[184452.455828] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[184452.455830] ahci 0000:00:1f.2: setting latency timer to 64
>[184452.455886] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[184452.455909] [drm] nouveau 0000:01:00.0: POSTing device...
>[184452.455911] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[184452.496797] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[184452.524575] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[184452.524614] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[184452.525680] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[184452.525680] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[184452.545670] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[184452.687816] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[184452.762551] ata5: SATA link down (SStatus 0 SControl 300)
>[184452.764526] ata6: SATA link down (SStatus 0 SControl 300)
>[184452.767546] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[184452.845403] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[184452.854427] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[184452.875448] [drm] nouveau 0000:01:00.0: Restoring mode...
>[184452.955053] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[184452.956452] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[184452.957266] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[184452.971442] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[184452.971849] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[184452.973661] ata2.00: configured for UDMA/100
>[184453.353864] mei 0000:00:16.0: wd: unable to register watchdog device.
>[184453.445394] firewire_core 0000:0d:00.3: rediscovered device fw0
>[184454.756531] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[184454.764947] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[184454.764951] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[184454.765234] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[184454.765237] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[184454.768112] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[184454.768116] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[184454.768393] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[184454.768396] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[184454.769752] ata1.00: configured for UDMA/100
>[184454.769931] sd 0:0:0:0: [sda] Starting disk
>[184454.790906] PM: resume of devices complete after 2341.262 msecs
>[184454.791069] PM: Finishing wakeup.
>[184454.791070] Restarting tasks ... done.
>[184454.806349] video LNXVIDEO:01: Restoring backlight state
>[184454.979177] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[184455.079779] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[184455.079952] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[184455.082184] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[184455.082500] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[184455.201645] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[184455.442866] usb 1-1.4: new full-speed USB device number 53 using ehci_hcd
>[184455.531515] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[184455.531521] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[184455.531524] usb 1-1.4: Product: Broadcom Bluetooth Device
>[184455.531527] usb 1-1.4: Manufacturer: Broadcom Corp
>[184455.531529] usb 1-1.4: SerialNumber: 78DD08A62030
>[184460.522727] wlan0: authenticate with 00:19:5b:50:46:9d
>[184460.534178] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[184460.535991] wlan0: authenticated
>[184460.536824] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[184460.540116] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=2)
>[184460.542789] wlan0: associated
>[184460.542831] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[185452.491529] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[185452.594770] cfg80211: Calling CRDA to update world regulatory domain
>[185452.635349] cfg80211: World regulatory domain updated:
>[185452.635354] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[185452.635356] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[185452.635359] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[185452.635361] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[185452.635362] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[185452.635364] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[185452.635381] cfg80211: Calling CRDA for country: US
>[185452.639564] cfg80211: Regulatory domain changed to country: US
>[185452.639568] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[185452.639570] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[185452.639572] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[185452.639574] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[185452.639575] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[185452.639577] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[185452.639578] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[185453.213573] usb 1-1.4: USB disconnect, device number 53
>[185453.524972] PM: Syncing filesystems ... done.
>[185453.536119] PM: Preparing system for mem sleep
>[185453.883372] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[185453.894372] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[185453.905333] PM: Entering mem sleep
>[185453.905473] Suspending console(s) (use no_console_suspend to debug)
>[185454.097321] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[185454.097428] sd 0:0:0:0: [sda] Stopping disk
>[185454.162119] [drm] nouveau 0000:01:00.0: Disabling display...
>[185454.163731] ACPI handle has no context!
>[185454.187136] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[185454.714794] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[185454.714813] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[185454.714892] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[185455.784370] [drm] nouveau 0000:01:00.0: Idling channels...
>[185455.785107] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[185459.479541] [drm] nouveau 0000:01:00.0: And we're gone!
>[185459.490308] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[185459.490607] PM: suspend of devices complete after 5599.028 msecs
>[185459.490827] PM: late suspend of devices complete after 0.217 msecs
>[185459.501352] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[185459.512147] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[185459.512390] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[185459.523112] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[185459.534190] PM: noirq suspend of devices complete after 43.469 msecs
>[185459.534646] ACPI: Preparing to enter system sleep state S3
>[185459.581999] PM: Saving platform NVS memory
>[185459.584942] Disabling non-boot CPUs ...
>[185459.586311] smpboot: CPU 1 is now offline
>[185459.587079] Broke affinity for irq 44
>[185459.588252] smpboot: CPU 2 is now offline
>[185459.588958] Broke affinity for irq 23
>[185459.589984] smpboot: CPU 3 is now offline
>[185459.590398] Extended CMOS year: 2000
>[185459.591433] ACPI: Low-level resume complete
>[185459.591496] PM: Restoring platform NVS memory
>[185459.592226] Extended CMOS year: 2000
>[185459.592315] Enabling non-boot CPUs ...
>[185459.592443] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[185459.610818] CPU1 is up
>[185459.610874] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[185459.627776] CPU2 is up
>[185459.627837] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[185459.644734] CPU3 is up
>[185459.647870] ACPI: Waking up from system sleep state S3
>[185459.744454] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[185459.755431] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[185459.766638] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[185459.777373] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[185459.788444] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[185459.843358] PM: noirq resume of devices complete after 121.199 msecs
>[185459.843426] PM: early resume of devices complete after 0.038 msecs
>[185459.843474] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[185459.843512] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[185459.843602] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[185459.843608] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[185459.843654] pci 0000:00:1e.0: setting latency timer to 64
>[185459.843685] ahci 0000:00:1f.2: setting latency timer to 64
>[185459.843702] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[185459.843704] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[185459.843741] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[185459.843768] [drm] nouveau 0000:01:00.0: POSTing device...
>[185459.843770] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[185459.884882] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[185459.912658] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[185459.912697] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[185459.913762] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[185459.913763] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[185459.933753] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[185460.075742] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[185460.150405] ata5: SATA link down (SStatus 0 SControl 300)
>[185460.153399] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[185460.154418] ata6: SATA link down (SStatus 0 SControl 300)
>[185460.233337] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[185460.242946] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[185460.263992] [drm] nouveau 0000:01:00.0: Restoring mode...
>[185460.342949] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[185460.344587] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[185460.345484] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[185460.359667] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[185460.360164] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[185460.361899] ata2.00: configured for UDMA/100
>[185460.732703] mei 0000:00:16.0: wd: unable to register watchdog device.
>[185460.763872] firewire_core 0000:0d:00.3: rediscovered device fw0
>[185462.145424] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[185462.152226] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[185462.152230] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[185462.152496] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[185462.152499] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[185462.155359] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[185462.155363] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[185462.155646] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[185462.155650] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[185462.156955] ata1.00: configured for UDMA/100
>[185462.157124] sd 0:0:0:0: [sda] Starting disk
>[185462.186358] PM: resume of devices complete after 2348.832 msecs
>[185462.186521] PM: Finishing wakeup.
>[185462.186522] Restarting tasks ... done.
>[185462.194706] video LNXVIDEO:01: Restoring backlight state
>[185462.407906] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[185462.508580] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[185462.508751] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[185462.510497] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[185462.510811] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[185462.630754] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[185462.831677] usb 1-1.4: new full-speed USB device number 54 using ehci_hcd
>[185462.932302] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[185462.932307] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[185462.932310] usb 1-1.4: Product: Broadcom Bluetooth Device
>[185462.932312] usb 1-1.4: Manufacturer: Broadcom Corp
>[185462.932314] usb 1-1.4: SerialNumber: 78DD08A62030
>[185467.961169] wlan0: authenticate with 00:19:5b:50:46:9d
>[185467.972902] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[185467.974732] wlan0: authenticated
>[185467.975639] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[185467.978944] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=2)
>[185467.981497] wlan0: associated
>[185467.981548] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[185844.459719] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[185844.544575] cfg80211: Calling CRDA to update world regulatory domain
>[185844.573260] cfg80211: World regulatory domain updated:
>[185844.573264] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[185844.573267] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[185844.573269] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[185844.573270] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[185844.573272] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[185844.573274] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[185844.573290] cfg80211: Calling CRDA for country: US
>[185844.578634] cfg80211: Regulatory domain changed to country: US
>[185844.578637] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[185844.578639] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[185844.578640] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[185844.578641] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[185844.578642] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[185844.578644] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[185844.578645] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[185845.183895] usb 1-1.4: USB disconnect, device number 54
>[185845.642220] PM: Syncing filesystems ... done.
>[185845.653262] PM: Preparing system for mem sleep
>[185845.998084] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[185846.009743] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[185846.020719] PM: Entering mem sleep
>[185846.020853] Suspending console(s) (use no_console_suspend to debug)
>[185846.207213] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[185846.207292] sd 0:0:0:0: [sda] Stopping disk
>[185846.266529] [drm] nouveau 0000:01:00.0: Disabling display...
>[185846.268124] ACPI handle has no context!
>[185846.292588] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[185846.829499] [drm] nouveau 0000:01:00.0: Disabling fbcon...
>[185846.829511] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[185846.829643] [drm] nouveau 0000:01:00.0: Evicting buffers...
>[185847.789523] [drm] nouveau 0000:01:00.0: Idling channels...
>[185847.790299] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[185851.478838] [drm] nouveau 0000:01:00.0: And we're gone!
>[185851.489865] nouveau 0000:01:00.0: power state changed by ACPI to D3hot
>[185851.490129] PM: suspend of devices complete after 5482.970 msecs
>[185851.490351] PM: late suspend of devices complete after 0.219 msecs
>[185851.500900] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[185851.511697] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[185851.511941] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[185851.522667] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[185851.533735] PM: noirq suspend of devices complete after 43.492 msecs
>[185851.534193] ACPI: Preparing to enter system sleep state S3
>[185851.581555] PM: Saving platform NVS memory
>[185851.584523] Disabling non-boot CPUs ...
>[185851.586130] smpboot: CPU 1 is now offline
>[185851.586876] Broke affinity for irq 44
>[185851.587896] smpboot: CPU 2 is now offline
>[185851.588589] Broke affinity for irq 23
>[185851.589607] smpboot: CPU 3 is now offline
>[185851.590034] Extended CMOS year: 2000
>[185851.591068] ACPI: Low-level resume complete
>[185851.591130] PM: Restoring platform NVS memory
>[185851.591860] Extended CMOS year: 2000
>[185851.591948] Enabling non-boot CPUs ...
>[185851.592079] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[185851.610374] CPU1 is up
>[185851.610433] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[185851.627332] CPU2 is up
>[185851.627386] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[185851.644288] CPU3 is up
>[185851.647416] ACPI: Waking up from system sleep state S3
>[185851.744003] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[185851.754983] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[185851.766193] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[185851.776923] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[185851.787993] nouveau 0000:01:00.0: power state changed by ACPI to D0
>[185851.842906] PM: noirq resume of devices complete after 121.196 msecs
>[185851.842974] PM: early resume of devices complete after 0.038 msecs
>[185851.843021] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[185851.843059] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[185851.843152] mei 0000:00:16.0: irq 42 for MSI/MSI-X
>[185851.843160] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[185851.843205] pci 0000:00:1e.0: setting latency timer to 64
>[185851.843232] ahci 0000:00:1f.2: setting latency timer to 64
>[185851.843252] [drm] nouveau 0000:01:00.0: We're back, enabling device...
>[185851.843254] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[185851.843258] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[185851.843276] [drm] nouveau 0000:01:00.0: POSTing device...
>[185851.843278] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE817
>[185851.884156] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xECDD
>[185851.911931] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xFBA8
>[185851.911971] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xFBC1
>[185851.913036] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xFCA8
>[185851.913037] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xFD0D
>[185851.933028] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[185852.077255] usb 1-1.3: reset full-speed USB device number 3 using ehci_hcd
>[185852.152947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[185852.152975] ata5: SATA link down (SStatus 0 SControl 300)
>[185852.155381] ata6: SATA link down (SStatus 0 SControl 300)
>[185852.234828] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[185852.242448] [drm] nouveau 0000:01:00.0: Reinitialising engines...
>[185852.263434] [drm] nouveau 0000:01:00.0: Restoring mode...
>[185852.342381] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[185852.343213] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[185852.344486] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[185852.357314] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[185852.357820] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[185852.359653] ata2.00: configured for UDMA/100
>[185852.736865] mei 0000:00:16.0: wd: unable to register watchdog device.
>[185852.762412] firewire_core 0000:0d:00.3: rediscovered device fw0
>[185854.144943] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[185854.154108] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[185854.154112] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[185854.154370] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[185854.154373] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[185854.157165] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[185854.157169] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[185854.157412] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
>[185854.157416] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[185854.158731] ata1.00: configured for UDMA/100
>[185854.158883] sd 0:0:0:0: [sda] Starting disk
>[185854.179888] PM: resume of devices complete after 2342.830 msecs
>[185854.180054] PM: Finishing wakeup.
>[185854.180055] Restarting tasks ... done.
>[185854.202306] video LNXVIDEO:01: Restoring backlight state
>[185854.397573] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[185854.498101] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[185854.498267] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[185854.500627] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[185854.500954] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
>[185854.615088] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[185854.833177] usb 1-1.4: new full-speed USB device number 55 using ehci_hcd
>[185854.921939] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>[185854.921945] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[185854.921948] usb 1-1.4: Product: Broadcom Bluetooth Device
>[185854.921951] usb 1-1.4: Manufacturer: Broadcom Corp
>[185854.921953] usb 1-1.4: SerialNumber: 78DD08A62030
>[185859.984874] wlan0: authenticate with 00:19:5b:50:46:9d
>[185860.004313] wlan0: send auth to 00:19:5b:50:46:9d (try 1/3)
>[185860.006179] wlan0: authenticated
>[185860.007047] wlan0: associate with 00:19:5b:50:46:9d (try 1/3)
>[185860.010336] wlan0: RX AssocResp from 00:19:5b:50:46:9d (capab=0x431 status=0 aid=2)
>[185860.012740] wlan0: associated
>[185860.012792] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[187019.819372] wlan0: deauthenticating from 00:19:5b:50:46:9d by local choice (reason=3)
>[187019.857465] cfg80211: Calling CRDA to update world regulatory domain
>[187019.886463] cfg80211: World regulatory domain updated:
>[187019.886466] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[187019.886468] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[187019.886470] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[187019.886471] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[187019.886472] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[187019.886473] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[187019.886487] cfg80211: Calling CRDA for country: US
>[187019.889323] cfg80211: Regulatory domain changed to country: US
>[187019.889326] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[187019.889328] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[187019.889329] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[187019.889331] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[187019.889332] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[187019.889333] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[187019.889334] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[187020.630294] usb 1-1.4: USB disconnect, device number 55

Actions: View

Attachments on bug 891161: 671247 | 671248 | 671249 | 671250 | 671251 | 671252