Attachment 672173 Details for Bug 862862 – rhel5 hvm guest kernel crash with 2.6.18-308.20.1.el5.bz862862_ixgbevf_crash_3 with udev info

rhel5 hvm guest kernel crash with 2.6.18-308.20.1.el5.bz862862_ixgbevf_crash_3 with udev info

crash-log-2.6.18-308.20.1.el5.bz862862_ixgbevf_crash_3-with-udev-info.txt (text/plain), 247.18 KB, created by Pasi Karkkainen on 2013-01-03 19:25:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pasi Karkkainen

Created: 2013-01-03 19:25:28 UTC

Size: 247.18 KB

patch

obsolete

>Linux version 2.6.18-308.20.1.el5.bz862862_ixgbevf_crash_3 (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Wed Nov 28 22:48:33 EST 2012
>Command line: ro root=/dev/VolGroup00/LogVol00 ignore_loglevel console=tty0 console=ttyS0,115200,8n1
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000010000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fffac00 (usable)
> BIOS-e820: 000000003fffac00 - 0000000040000000 (reserved)
>DMI 2.4 present.
>DMI: Red Hat HVM domU, BIOS 3.1.2-308.13.1.el5 09/27/2012
>ACPI: RSDP (v002    Xen                                ) @ 0x00000000000eb340
>ACPI: XSDT (v001    Xen      HVM 0x00000000 HVML 0x00000000) @ 0x00000000000eb2b0
>ACPI: FADT (v004    Xen      HVM 0x00000000 HVML 0x00000000) @ 0x00000000000eb0c0
>ACPI: MADT (v002    Xen      HVM 0x00000000 HVML 0x00000000) @ 0x00000000000eb1c0
>ACPI: HPET (v001    Xen      HVM 0x00000000 HVML 0x00000000) @ 0x00000000000eb240
>ACPI: SSDT (v002    Xen      HVM 0x00000000 HVML 0x00000000) @ 0x00000000000eb278
>ACPI: DSDT (v002    Xen      HVM 0x00000000 INTL 0x20110413) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003fffa000
>Bootmem setup node 0 0000000000000000-000000003fffa000
>bootmap start 18000 pages 8
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>Setting up node 0 0-3fffa
>On node 0 totalpages: 256941
>  DMA zone: 2426 pages, LIFO batch:0
>  DMA32 zone: 254515 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1f48
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:12 APIC version 20
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 7 low level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ5 used by override.
>ACPI: IRQ7 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ10 used by override.
>ACPI: IRQ11 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e0000
>Nosave address range: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>Built 1 zonelists.  Total pages: 256941
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 ignore_loglevel console=tty0 console=ttyS0,115200,8n1
>debug: ignoring loglevel setting.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>ACPI: DMAR not present
>Memory: 1022448k/1048552k available (2620k kernel code, 25652k reserved, 1673k data, 224k init)
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.58 BogoMIPS (lpj=2266794)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 12288K
>MCE: Machine Check Exception Reporting is disabled.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 32k freed
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>WARNING calibrate_APIC_clock: the APIC timer calibration may be wrong.
>Detected 6.250 MHz APIC timer.
>Brought up 1 CPUs
>time.c: Using 70.837629 MHz WALL HPET GTOD HPET/TSC timer.
>time.c: Detected 2266.794 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=216 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=248 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 3419k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1f40-1f7f claimed by PIIX4 ACPI
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 70837629 Hz
>ACPI: DMAR not present
>PCI-GART: No AMD northbridge found.
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:02: ioport range 0x10c0-0x10c2 has been reserved
>pnp: 00:02: ioport range 0xb044-0xb047 has been reserved
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>type=2000 audit(1357240067.352:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>alg: No test for crc32c (crc32c-generic)
>ksign: Installing public key data
>Loading keyring
>- Added public key 8379E9C3FEB0A48
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
>Activating ISA DMA hang workarounds.
>Boot video device is 0000:00:02.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
>brd: module loaded
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX3: IDE controller at PCI slot 0000:00:01.1
>PIIX3: chipset revision 0
>PIIX3: not 100% native mode: will probe irqs later
>PCI: Setting latency timer of device 0000:00:01.1 to 64
>    ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: QEMU HARDDISK, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 41943040 sectors (21474 MB) w/256KiB Cache, CHS=16383/255/63, (U)DMA
>hda: cache flushes supported
> hda: hda1 hda2
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>input: AT Translated Set 2 keyboard as /class/input/input0
>ACPI: (supports S5)
>Initalizing network drop monitor service
>Freeing unused kernel memory: 224k freed
>Write protecting the kernel read-only data: 531k
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
>Creating block device nodes.
>Loading ehci-hcd.ko module
>Loading ohci-hcd.ko module
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:01.3[D] -> GSI 23 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.3 to 64
>uhci_hcd 0000:00:01.3: UHCI Host Controller
>uhci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:01.3: irq 169, io base 0x0000c020
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>libata version 3.00 loaded.
>Loading ata_piix.ko module
>Loading dm-mod.ko module
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
>Loading dm-log.ko module
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Loading dm-mem-cache.ko module
>Loading dm-region_hash.ko module
>Loading dm-message.ko module
>Loading dm-raid45.ko module
>device-mapper: dm-raid45: initialized v0.2594l
>Waiting for driver initialization.
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>input: QEMU 0.8.2 QEMU USB Tablet as /class/input/input2
>input,hidraw0: USB HID v0.01 Pointer [QEMU 0.8.2 QEMU USB Tablet] on usb-0000:00:01.3-2
>Scanning and configuring dmraid supported devices
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VolGroup00" using metadata type lvm2
>Activating logical volumes
>  2 logical volume(s) in volume group "VolGroup00" now active
>Trying to resume from /dev/VolGroup00/LogVol01
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1357240090.885:2): selinux=0 auid=4294967295 ses=4294967295
>
INIT: version 2.86 booting

>		Welcome to Red Hat Enterprise Linux Server
>		Press 'I' to enter interactive startup.
>Setting clock  (localtime): Thu Jan  3 19:08:12 EET 2013 [  OK  ]

>Starting udev: udevd[389]: main: will daemonize

>udevd[390]: main: initialize max_childs to 378

>udevd[390]: main: initialize max_childs_running to 16

>udevd[390]: udev_event_run: seq 330 forked, pid [392], 'add' 'mem', 0 seconds old

>udevd-event[392]: udev_rules_get_name: no node name set, will use kernel name 'oldmem'

>udevd-event[392]: udev_db_get_device: no db file to read /dev/.udev/db/class@mem@oldmem: No such file or directory

>udevd[390]: udev_event_run: seq 331 forked, pid [393], 'add' 'mem', 0 seconds old

>udevd-event[393]: udev_rules_get_name: no node name set, will use kernel name 'kmsg'

>udevd[390]: udev_event_run: seq 332 forked, pid [395], 'add' 'mem', 0 seconds old

>udevd[390]: udev_event_run: seq 333 forked, pid [396], 'add' 'mem', 0 seconds old

>udevd[390]: udev_event_run: seq 334 forked, pid [397], 'add' 'mem', 0 seconds old

>udevd[390]: udev_event_run: seq 335 forked, pid [398], 'add' 'mem', 0 seconds old

>udevd[390]: udev_event_run: seq 336 forked, pid [399], 'add' 'mem', 0 seconds old

>udevd-event[392]: udev_node_add: creating device node '/dev/oldmem', major = '1', minor = '12', mode = '0600', uid = '0', gid = '0'

>udevd-event[392]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[392]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[393]: udev_db_get_device: no db file to read /dev/.udev/db/class@mem@kmsg: No such file or directory

>udevd-event[393]: udev_node_add: creating device node '/dev/kmsg', major = '1', minor = '11', mode = '0600', uid = '0', gid = '0'

>udevd-event[393]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[393]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[393]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[393]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[395]: udev_rules_get_name: no node name set, will use kernel name 'urandom'

>udevd-event[395]: udev_db_get_device: no db file to read /dev/.udev/db/class@mem@urandom: No such file or directory

>udevd-event[395]: udev_node_add: creating device node '/dev/urandom', major = '1', minor = '9', mode = '0444', uid = '0', gid = '0'

>udevd-event[395]: udev_node_mknod: preserve file '/dev/urandom', because it has correct dev_t

>udevd-event[395]: udev_event_run: seq 332 finished

>udevd-event[396]: udev_rules_get_name: no node name set, will use kernel name 'random'

>udevd-event[396]: udev_db_get_device: no db file to read /dev/.udev/db/class@mem@random: No such file or directory

>udevd-event[396]: udev_node_add: creating device node '/dev/random', major = '1', minor = '8', mode = '0666', uid = '0', gid = '0'

>udevd-event[396]: udev_event_run: seq 333 finished

>udevd-event[397]: udev_rules_get_name: no node name set, will use kernel name 'full'

>udevd-event[397]: udev_db_get_device: no db file to read /dev/.udev/db/class@mem@full: No such file or directory

>udevd-event[397]: udev_node_add: creating device node '/dev/full', major = '1', minor = '7', mode = '0666', uid = '0', gid = '0'

>udevd-event[397]: udev_event_run: seq 334 finished

>udevd-event[398]: udev_rules_get_name: no node name set, will use kernel name 'zero'

>udevd-event[398]: udev_db_get_device: no db file to read /dev/.udev/db/class@mem@zero: No such file or directory

>udevd-event[399]: udev_rules_get_name: no node name set, will use kernel name 'port'

>udevd-event[392]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[392]: run_program: '/lib/udev/udev_run_devd'

>udevd[390]: udev_done: seq 332, pid [395] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 333, pid [396] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 334, pid [397] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 337 forked, pid [405], 'add' 'mem', 0 seconds old

>udevd[390]: udev_event_run: seq 338 forked, pid [406], 'add' 'mem', 0 seconds old

>udevd[390]: udev_event_run: seq 339 forked, pid [407], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 340 forked, pid [408], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 341 forked, pid [409], 'add' 'tty', 0 seconds old

>udevd-event[398]: udev_node_add: creating device node '/dev/zero', major = '1', minor = '5', mode = '0666', uid = '0', gid = '0'

>udevd-event[398]: udev_node_mknod: preserve file '/dev/zero', because it has correct dev_t

>udevd-event[398]: udev_event_run: seq 335 finished

>udevd-event[399]: udev_db_get_device: no db file to read /dev/.udev/db/class@mem@port: No such file or directory

>udevd-event[399]: udev_node_add: creating device node '/dev/port', major = '1', minor = '4', mode = '0640', uid = '0', gid = '9'

>udevd-event[399]: udev_event_run: seq 336 finished

>udevd-event[405]: udev_rules_get_name: no node name set, will use kernel name 'null'

>udevd-event[405]: udev_db_get_device: no db file to read /dev/.udev/db/class@mem@null: No such file or directory

>udevd-event[393]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[393]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[393]: run_program: '/sbin/pam_console_apply /dev/kmsg '

>udevd-event[405]: udev_node_add: creating device node '/dev/null', major = '1', minor = '3', mode = '0666', uid = '0', gid = '0'

>udevd-event[405]: udev_node_mknod: preserve file '/dev/null', because it has correct dev_t

>udevd-event[405]: udev_event_run: seq 337 finished

>udevd-event[406]: udev_rules_get_name: no node name set, will use kernel name 'mem'

>udevd-event[406]: udev_db_get_device: no db file to read /dev/.udev/db/class@mem@mem: No such file or directory

>udevd-event[406]: udev_node_add: creating device node '/dev/mem', major = '1', minor = '1', mode = '0640', uid = '0', gid = '9'

>udevd-event[406]: udev_event_run: seq 338 finished

>udevd-event[407]: udev_rules_get_name: rule applied, 'ttyS0' becomes 'ttyS0'

>udevd-event[407]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@ttyS0: No such file or directory

>udevd-event[407]: udev_node_add: creating device node '/dev/ttyS0', major = '4', minor = '64', mode = '0660', uid = '0', gid = '14'

>udevd-event[407]: udev_node_mknod: preserve file '/dev/ttyS0', because it has correct dev_t

>udevd-event[407]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[408]: udev_rules_get_name: rule applied, 'ttyS3' becomes 'ttyS3'

>udevd-event[408]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@ttyS3: No such file or directory

>udevd-event[393]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[393]: udev_event_run: seq 331 finished

>udevd-event[409]: udev_rules_get_name: rule applied, 'ttyS2' becomes 'ttyS2'

>udevd-event[392]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[392]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[392]: run_program: '/sbin/pam_console_apply /dev/oldmem '

>udevd-event[392]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[392]: udev_event_run: seq 330 finished

>udevd[390]: udev_done: seq 330, pid [392] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 331, pid [393] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 335, pid [398] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 336, pid [399] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 337, pid [405] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 338, pid [406] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 342 forked, pid [412], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 343 forked, pid [413], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 344 forked, pid [414], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 345 forked, pid [415], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 346 forked, pid [416], 'add' 'tty', 0 seconds old

>udevd-event[407]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[407]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[407]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[407]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[407]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[407]: run_program: '/sbin/pam_console_apply /dev/ttyS0 '

>udevd-event[407]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[407]: udev_event_run: seq 339 finished

>udevd-event[408]: udev_node_add: creating device node '/dev/ttyS3', major = '4', minor = '67', mode = '0660', uid = '0', gid = '14'

>udevd-event[408]: udev_node_mknod: preserve file '/dev/ttyS3', because it has correct dev_t

>udevd-event[408]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[408]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[408]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[408]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[408]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[408]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[408]: run_program: '/sbin/pam_console_apply /dev/ttyS3 '

>udevd-event[408]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[408]: udev_event_run: seq 340 finished

>udevd-event[409]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@ttyS2: No such file or directory

>udevd-event[409]: udev_node_add: creating device node '/dev/ttyS2', major = '4', minor = '66', mode = '0660', uid = '0', gid = '14'

>udevd-event[409]: udev_node_mknod: preserve file '/dev/ttyS2', because it has correct dev_t

>udevd-event[409]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[409]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[409]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[409]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[409]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[409]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[409]: run_program: '/sbin/pam_console_apply /dev/ttyS2 '

>udevd-event[409]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[409]: udev_event_run: seq 341 finished

>udevd-event[412]: udev_rules_get_name: rule applied, 'ttyS1' becomes 'ttyS1'

>udevd-event[412]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@ttyS1: No such file or directory

>udevd-event[412]: udev_node_add: creating device node '/dev/ttyS1', major = '4', minor = '65', mode = '0660', uid = '0', gid = '14'

>udevd-event[412]: udev_node_mknod: preserve file '/dev/ttyS1', because it has correct dev_t

>udevd-event[412]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[412]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[412]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[412]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[412]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[412]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[412]: run_program: '/sbin/pam_console_apply /dev/ttyS1 '

>udevd-event[412]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[412]: udev_event_run: seq 342 finished

>udevd-event[413]: udev_rules_get_name: rule applied, 'tty63' becomes 'tty63'

>udevd-event[413]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty63: No such file or directory

>udevd-event[413]: udev_node_add: creating device node '/dev/tty63', major = '4', minor = '63', mode = '0660', uid = '0', gid = '5'

>udevd-event[413]: udev_event_run: seq 343 finished

>udevd-event[414]: udev_rules_get_name: rule applied, 'tty62' becomes 'tty62'

>udevd-event[414]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty62: No such file or directory

>udevd-event[414]: udev_node_add: creating device node '/dev/tty62', major = '4', minor = '62', mode = '0660', uid = '0', gid = '5'

>udevd-event[414]: udev_event_run: seq 344 finished

>udevd-event[415]: udev_rules_get_name: rule applied, 'tty61' becomes 'tty61'

>udevd-event[415]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty61: No such file or directory

>udevd-event[416]: udev_rules_get_name: rule applied, 'tty60' becomes 'tty60'

>udevd[390]: udev_done: seq 339, pid [407] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 340, pid [408] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 341, pid [409] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 342, pid [412] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 343, pid [413] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 344, pid [414] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 347 forked, pid [429], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 348 forked, pid [430], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 349 forked, pid [431], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 350 forked, pid [432], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 351 forked, pid [433], 'add' 'tty', 0 seconds old

>udevd-event[415]: udev_node_add: creating device node '/dev/tty61', major = '4', minor = '61', mode = '0660', uid = '0', gid = '5'

>udevd-event[415]: udev_event_run: seq 345 finished

>udevd-event[416]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty60: No such file or directory

>udevd-event[416]: udev_node_add: creating device node '/dev/tty60', major = '4', minor = '60', mode = '0660', uid = '0', gid = '5'

>udevd-event[416]: udev_event_run: seq 346 finished

>udevd-event[429]: udev_rules_get_name: rule applied, 'tty59' becomes 'tty59'

>udevd-event[429]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty59: No such file or directory

>udevd-event[429]: udev_node_add: creating device node '/dev/tty59', major = '4', minor = '59', mode = '0660', uid = '0', gid = '5'

>udevd-event[429]: udev_event_run: seq 347 finished

>udevd-event[430]: udev_rules_get_name: rule applied, 'tty58' becomes 'tty58'

>udevd-event[430]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty58: No such file or directory

>udevd-event[430]: udev_node_add: creating device node '/dev/tty58', major = '4', minor = '58', mode = '0660', uid = '0', gid = '5'

>udevd-event[430]: udev_event_run: seq 348 finished

>udevd-event[431]: udev_rules_get_name: rule applied, 'tty57' becomes 'tty57'

>udevd-event[431]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty57: No such file or directory

>udevd-event[431]: udev_node_add: creating device node '/dev/tty57', major = '4', minor = '57', mode = '0660', uid = '0', gid = '5'

>udevd-event[431]: udev_event_run: seq 349 finished

>udevd-event[432]: udev_rules_get_name: rule applied, 'tty56' becomes 'tty56'

>udevd-event[432]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty56: No such file or directory

>udevd-event[432]: udev_node_add: creating device node '/dev/tty56', major = '4', minor = '56', mode = '0660', uid = '0', gid = '5'

>udevd-event[433]: udev_rules_get_name: rule applied, 'tty55' becomes 'tty55'

>udevd[390]: udev_done: seq 345, pid [415] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 346, pid [416] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 347, pid [429] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 348, pid [430] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 349, pid [431] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 352 forked, pid [434], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 353 forked, pid [435], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 354 forked, pid [436], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 355 forked, pid [437], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 356 forked, pid [438], 'add' 'tty', 0 seconds old

>udevd-event[432]: udev_event_run: seq 350 finished

>udevd-event[433]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty55: No such file or directory

>udevd-event[433]: udev_node_add: creating device node '/dev/tty55', major = '4', minor = '55', mode = '0660', uid = '0', gid = '5'

>udevd-event[433]: udev_event_run: seq 351 finished

>udevd-event[434]: udev_rules_get_name: rule applied, 'tty54' becomes 'tty54'

>udevd-event[434]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty54: No such file or directory

>udevd-event[434]: udev_node_add: creating device node '/dev/tty54', major = '4', minor = '54', mode = '0660', uid = '0', gid = '5'

>udevd-event[434]: udev_event_run: seq 352 finished

>udevd-event[435]: udev_rules_get_name: rule applied, 'tty53' becomes 'tty53'

>udevd-event[435]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty53: No such file or directory

>udevd-event[435]: udev_node_add: creating device node '/dev/tty53', major = '4', minor = '53', mode = '0660', uid = '0', gid = '5'

>udevd-event[435]: udev_event_run: seq 353 finished

>udevd-event[436]: udev_rules_get_name: rule applied, 'tty52' becomes 'tty52'

>udevd-event[436]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty52: No such file or directory

>udevd-event[436]: udev_node_add: creating device node '/dev/tty52', major = '4', minor = '52', mode = '0660', uid = '0', gid = '5'

>udevd-event[436]: udev_event_run: seq 354 finished

>udevd-event[437]: udev_rules_get_name: rule applied, 'tty51' becomes 'tty51'

>udevd-event[437]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty51: No such file or directory

>udevd-event[437]: udev_node_add: creating device node '/dev/tty51', major = '4', minor = '51', mode = '0660', uid = '0', gid = '5'

>udevd-event[438]: udev_rules_get_name: rule applied, 'tty50' becomes 'tty50'

>udevd[390]: udev_done: seq 350, pid [432] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 351, pid [433] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 352, pid [434] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 353, pid [435] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 354, pid [436] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 357 forked, pid [439], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 358 forked, pid [440], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 359 forked, pid [441], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 360 forked, pid [442], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 361 forked, pid [443], 'add' 'tty', 0 seconds old

>udevd-event[437]: udev_event_run: seq 355 finished

>udevd-event[438]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty50: No such file or directory

>udevd-event[438]: udev_node_add: creating device node '/dev/tty50', major = '4', minor = '50', mode = '0660', uid = '0', gid = '5'

>udevd-event[438]: udev_event_run: seq 356 finished

>udevd-event[439]: udev_rules_get_name: rule applied, 'tty49' becomes 'tty49'

>udevd-event[439]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty49: No such file or directory

>udevd-event[439]: udev_node_add: creating device node '/dev/tty49', major = '4', minor = '49', mode = '0660', uid = '0', gid = '5'

>udevd-event[439]: udev_event_run: seq 357 finished

>udevd-event[440]: udev_rules_get_name: rule applied, 'tty48' becomes 'tty48'

>udevd-event[440]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty48: No such file or directory

>udevd-event[440]: udev_node_add: creating device node '/dev/tty48', major = '4', minor = '48', mode = '0660', uid = '0', gid = '5'

>udevd-event[440]: udev_event_run: seq 358 finished

>udevd-event[441]: udev_rules_get_name: rule applied, 'tty47' becomes 'tty47'

>udevd-event[441]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty47: No such file or directory

>udevd-event[441]: udev_node_add: creating device node '/dev/tty47', major = '4', minor = '47', mode = '0660', uid = '0', gid = '5'

>udevd-event[441]: udev_event_run: seq 359 finished

>udevd-event[442]: udev_rules_get_name: rule applied, 'tty46' becomes 'tty46'

>udevd-event[442]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty46: No such file or directory

>udevd-event[442]: udev_node_add: creating device node '/dev/tty46', major = '4', minor = '46', mode = '0660', uid = '0', gid = '5'

>udevd-event[443]: udev_rules_get_name: rule applied, 'tty45' becomes 'tty45'

>udevd[390]: udev_done: seq 355, pid [437] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 356, pid [438] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 357, pid [439] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 358, pid [440] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 359, pid [441] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 362 forked, pid [444], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 363 forked, pid [445], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 364 forked, pid [446], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 365 forked, pid [447], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 366 forked, pid [448], 'add' 'tty', 0 seconds old

>udevd-event[442]: udev_event_run: seq 360 finished

>udevd-event[443]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty45: No such file or directory

>udevd-event[443]: udev_node_add: creating device node '/dev/tty45', major = '4', minor = '45', mode = '0660', uid = '0', gid = '5'

>udevd-event[443]: udev_event_run: seq 361 finished

>udevd-event[444]: udev_rules_get_name: rule applied, 'tty44' becomes 'tty44'

>udevd-event[444]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty44: No such file or directory

>udevd-event[444]: udev_node_add: creating device node '/dev/tty44', major = '4', minor = '44', mode = '0660', uid = '0', gid = '5'

>udevd-event[444]: udev_event_run: seq 362 finished

>udevd-event[445]: udev_rules_get_name: rule applied, 'tty43' becomes 'tty43'

>udevd-event[445]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty43: No such file or directory

>udevd-event[445]: udev_node_add: creating device node '/dev/tty43', major = '4', minor = '43', mode = '0660', uid = '0', gid = '5'

>udevd-event[445]: udev_event_run: seq 363 finished

>udevd-event[446]: udev_rules_get_name: rule applied, 'tty42' becomes 'tty42'

>udevd-event[446]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty42: No such file or directory

>udevd-event[446]: udev_node_add: creating device node '/dev/tty42', major = '4', minor = '42', mode = '0660', uid = '0', gid = '5'

>udevd-event[446]: udev_event_run: seq 364 finished

>udevd-event[447]: udev_rules_get_name: rule applied, 'tty41' becomes 'tty41'

>udevd-event[447]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty41: No such file or directory

>udevd-event[447]: udev_node_add: creating device node '/dev/tty41', major = '4', minor = '41', mode = '0660', uid = '0', gid = '5'

>udevd-event[448]: udev_rules_get_name: rule applied, 'tty40' becomes 'tty40'

>udevd[390]: udev_done: seq 360, pid [442] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 361, pid [443] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 362, pid [444] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 363, pid [445] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 364, pid [446] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 367 forked, pid [449], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 368 forked, pid [450], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 369 forked, pid [451], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 370 forked, pid [452], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 371 forked, pid [453], 'add' 'tty', 0 seconds old

>udevd-event[447]: udev_event_run: seq 365 finished

>udevd-event[448]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty40: No such file or directory

>udevd-event[448]: udev_node_add: creating device node '/dev/tty40', major = '4', minor = '40', mode = '0660', uid = '0', gid = '5'

>udevd-event[448]: udev_event_run: seq 366 finished

>udevd-event[449]: udev_rules_get_name: rule applied, 'tty39' becomes 'tty39'

>udevd-event[449]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty39: No such file or directory

>udevd-event[449]: udev_node_add: creating device node '/dev/tty39', major = '4', minor = '39', mode = '0660', uid = '0', gid = '5'

>udevd-event[449]: udev_event_run: seq 367 finished

>udevd-event[450]: udev_rules_get_name: rule applied, 'tty38' becomes 'tty38'

>udevd-event[450]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty38: No such file or directory

>udevd-event[450]: udev_node_add: creating device node '/dev/tty38', major = '4', minor = '38', mode = '0660', uid = '0', gid = '5'

>udevd-event[450]: udev_event_run: seq 368 finished

>udevd-event[451]: udev_rules_get_name: rule applied, 'tty37' becomes 'tty37'

>udevd-event[451]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty37: No such file or directory

>udevd-event[451]: udev_node_add: creating device node '/dev/tty37', major = '4', minor = '37', mode = '0660', uid = '0', gid = '5'

>udevd-event[451]: udev_event_run: seq 369 finished

>udevd-event[452]: udev_rules_get_name: rule applied, 'tty36' becomes 'tty36'

>udevd-event[452]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty36: No such file or directory

>udevd-event[452]: udev_node_add: creating device node '/dev/tty36', major = '4', minor = '36', mode = '0660', uid = '0', gid = '5'

>udevd-event[453]: udev_rules_get_name: rule applied, 'tty35' becomes 'tty35'

>udevd-event[453]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty35: No such file or directory

>udevd[390]: udev_done: seq 365, pid [447] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 366, pid [448] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 367, pid [449] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 368, pid [450] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 369, pid [451] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 372 forked, pid [454], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 373 forked, pid [455], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 374 forked, pid [456], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 375 forked, pid [457], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 376 forked, pid [458], 'add' 'tty', 0 seconds old

>udevd-event[452]: udev_event_run: seq 370 finished

>udevd-event[453]: udev_node_add: creating device node '/dev/tty35', major = '4', minor = '35', mode = '0660', uid = '0', gid = '5'

>udevd-event[453]: udev_event_run: seq 371 finished

>udevd-event[454]: udev_rules_get_name: rule applied, 'tty34' becomes 'tty34'

>udevd-event[454]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty34: No such file or directory

>udevd-event[454]: udev_node_add: creating device node '/dev/tty34', major = '4', minor = '34', mode = '0660', uid = '0', gid = '5'

>udevd-event[454]: udev_event_run: seq 372 finished

>udevd-event[455]: udev_rules_get_name: rule applied, 'tty33' becomes 'tty33'

>udevd-event[455]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty33: No such file or directory

>udevd-event[455]: udev_node_add: creating device node '/dev/tty33', major = '4', minor = '33', mode = '0660', uid = '0', gid = '5'

>udevd-event[455]: udev_event_run: seq 373 finished

>udevd-event[456]: udev_rules_get_name: rule applied, 'tty32' becomes 'tty32'

>udevd-event[456]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty32: No such file or directory

>udevd-event[456]: udev_node_add: creating device node '/dev/tty32', major = '4', minor = '32', mode = '0660', uid = '0', gid = '5'

>udevd-event[456]: udev_event_run: seq 374 finished

>udevd-event[457]: udev_rules_get_name: rule applied, 'tty31' becomes 'tty31'

>udevd-event[457]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty31: No such file or directory

>udevd-event[457]: udev_node_add: creating device node '/dev/tty31', major = '4', minor = '31', mode = '0660', uid = '0', gid = '5'

>udevd-event[458]: udev_rules_get_name: rule applied, 'tty30' becomes 'tty30'

>udevd-event[458]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty30: No such file or directory

>udevd[390]: udev_done: seq 370, pid [452] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 371, pid [453] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 372, pid [454] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 373, pid [455] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 374, pid [456] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 377 forked, pid [459], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 378 forked, pid [460], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 379 forked, pid [461], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 380 forked, pid [462], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 381 forked, pid [463], 'add' 'tty', 0 seconds old

>udevd-event[457]: udev_event_run: seq 375 finished

>udevd-event[458]: udev_node_add: creating device node '/dev/tty30', major = '4', minor = '30', mode = '0660', uid = '0', gid = '5'

>udevd-event[458]: udev_event_run: seq 376 finished

>udevd-event[459]: udev_rules_get_name: rule applied, 'tty29' becomes 'tty29'

>udevd-event[459]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty29: No such file or directory

>udevd-event[459]: udev_node_add: creating device node '/dev/tty29', major = '4', minor = '29', mode = '0660', uid = '0', gid = '5'

>udevd-event[459]: udev_event_run: seq 377 finished

>udevd-event[460]: udev_rules_get_name: rule applied, 'tty28' becomes 'tty28'

>udevd-event[460]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty28: No such file or directory

>udevd-event[460]: udev_node_add: creating device node '/dev/tty28', major = '4', minor = '28', mode = '0660', uid = '0', gid = '5'

>udevd-event[460]: udev_event_run: seq 378 finished

>udevd-event[461]: udev_rules_get_name: rule applied, 'tty27' becomes 'tty27'

>udevd-event[461]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty27: No such file or directory

>udevd-event[461]: udev_node_add: creating device node '/dev/tty27', major = '4', minor = '27', mode = '0660', uid = '0', gid = '5'

>udevd-event[461]: udev_event_run: seq 379 finished

>udevd-event[462]: udev_rules_get_name: rule applied, 'tty26' becomes 'tty26'

>udevd-event[462]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty26: No such file or directory

>udevd-event[462]: udev_node_add: creating device node '/dev/tty26', major = '4', minor = '26', mode = '0660', uid = '0', gid = '5'

>udevd-event[463]: udev_rules_get_name: rule applied, 'tty25' becomes 'tty25'

>udevd[390]: udev_done: seq 375, pid [457] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 376, pid [458] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 377, pid [459] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 378, pid [460] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 379, pid [461] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 382 forked, pid [464], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 383 forked, pid [465], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 384 forked, pid [466], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 385 forked, pid [467], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 386 forked, pid [468], 'add' 'tty', 0 seconds old

>udevd-event[462]: udev_event_run: seq 380 finished

>udevd-event[463]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty25: No such file or directory

>udevd-event[463]: udev_node_add: creating device node '/dev/tty25', major = '4', minor = '25', mode = '0660', uid = '0', gid = '5'

>udevd-event[463]: udev_event_run: seq 381 finished

>udevd-event[464]: udev_rules_get_name: rule applied, 'tty24' becomes 'tty24'

>udevd-event[464]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty24: No such file or directory

>udevd-event[464]: udev_node_add: creating device node '/dev/tty24', major = '4', minor = '24', mode = '0660', uid = '0', gid = '5'

>udevd-event[464]: udev_event_run: seq 382 finished

>udevd-event[465]: udev_rules_get_name: rule applied, 'tty23' becomes 'tty23'

>udevd-event[465]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty23: No such file or directory

>udevd-event[465]: udev_node_add: creating device node '/dev/tty23', major = '4', minor = '23', mode = '0660', uid = '0', gid = '5'

>udevd-event[465]: udev_event_run: seq 383 finished

>udevd-event[466]: udev_rules_get_name: rule applied, 'tty22' becomes 'tty22'

>udevd-event[466]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty22: No such file or directory

>udevd-event[466]: udev_node_add: creating device node '/dev/tty22', major = '4', minor = '22', mode = '0660', uid = '0', gid = '5'

>udevd-event[466]: udev_event_run: seq 384 finished

>udevd-event[467]: udev_rules_get_name: rule applied, 'tty21' becomes 'tty21'

>udevd-event[467]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty21: No such file or directory

>udevd-event[467]: udev_node_add: creating device node '/dev/tty21', major = '4', minor = '21', mode = '0660', uid = '0', gid = '5'

>udevd-event[468]: udev_rules_get_name: rule applied, 'tty20' becomes 'tty20'

>udevd-event[468]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty20: No such file or directory

>udevd[390]: udev_done: seq 380, pid [462] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 381, pid [463] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 382, pid [464] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 383, pid [465] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 384, pid [466] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 387 forked, pid [469], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 388 forked, pid [470], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 389 forked, pid [471], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 390 forked, pid [472], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 391 forked, pid [473], 'add' 'tty', 0 seconds old

>udevd-event[467]: udev_event_run: seq 385 finished

>udevd-event[468]: udev_node_add: creating device node '/dev/tty20', major = '4', minor = '20', mode = '0660', uid = '0', gid = '5'

>udevd-event[468]: udev_event_run: seq 386 finished

>udevd-event[469]: udev_rules_get_name: rule applied, 'tty19' becomes 'tty19'

>udevd-event[469]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty19: No such file or directory

>udevd-event[469]: udev_node_add: creating device node '/dev/tty19', major = '4', minor = '19', mode = '0660', uid = '0', gid = '5'

>udevd-event[469]: udev_event_run: seq 387 finished

>udevd-event[470]: udev_rules_get_name: rule applied, 'tty18' becomes 'tty18'

>udevd-event[470]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty18: No such file or directory

>udevd-event[470]: udev_node_add: creating device node '/dev/tty18', major = '4', minor = '18', mode = '0660', uid = '0', gid = '5'

>udevd-event[470]: udev_event_run: seq 388 finished

>udevd-event[471]: udev_rules_get_name: rule applied, 'tty17' becomes 'tty17'

>udevd-event[471]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty17: No such file or directory

>udevd-event[471]: udev_node_add: creating device node '/dev/tty17', major = '4', minor = '17', mode = '0660', uid = '0', gid = '5'

>udevd-event[471]: udev_event_run: seq 389 finished

>udevd-event[472]: udev_rules_get_name: rule applied, 'tty16' becomes 'tty16'

>udevd-event[472]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty16: No such file or directory

>udevd-event[472]: udev_node_add: creating device node '/dev/tty16', major = '4', minor = '16', mode = '0660', uid = '0', gid = '5'

>udevd-event[473]: udev_rules_get_name: rule applied, 'tty15' becomes 'tty15'

>udevd-event[473]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty15: No such file or directory

>udevd[390]: udev_event_run: seq 392 forked, pid [474], 'add' 'tty', 0 seconds old

>udevd[390]: udev_done: seq 385, pid [467] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 386, pid [468] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 387, pid [469] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 388, pid [470] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 389, pid [471] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 393 forked, pid [475], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 394 forked, pid [476], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 395 forked, pid [477], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 396 forked, pid [478], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 397 forked, pid [479], 'add' 'tty', 0 seconds old

>udevd-event[472]: udev_event_run: seq 390 finished

>udevd-event[473]: udev_node_add: creating device node '/dev/tty15', major = '4', minor = '15', mode = '0660', uid = '0', gid = '5'

>udevd-event[473]: udev_event_run: seq 391 finished

>udevd-event[474]: udev_rules_get_name: rule applied, 'tty14' becomes 'tty14'

>udevd-event[475]: udev_rules_get_name: rule applied, 'tty13' becomes 'tty13'

>udevd-event[475]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty13: No such file or directory

>udevd-event[475]: udev_node_add: creating device node '/dev/tty13', major = '4', minor = '13', mode = '0660', uid = '0', gid = '5'

>udevd-event[475]: udev_event_run: seq 393 finished

>udevd-event[476]: udev_rules_get_name: rule applied, 'tty12' becomes 'tty12'

>udevd-event[476]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty12: No such file or directory

>udevd-event[476]: udev_node_add: creating device node '/dev/tty12', major = '4', minor = '12', mode = '0660', uid = '0', gid = '5'

>udevd-event[476]: udev_node_mknod: preserve file '/dev/tty12', because it has correct dev_t

>udevd-event[476]: udev_event_run: seq 394 finished

>udevd-event[477]: udev_rules_get_name: rule applied, 'tty11' becomes 'tty11'

>udevd-event[477]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty11: No such file or directory

>udevd-event[477]: udev_node_add: creating device node '/dev/tty11', major = '4', minor = '11', mode = '0660', uid = '0', gid = '5'

>udevd-event[477]: udev_node_mknod: preserve file '/dev/tty11', because it has correct dev_t

>udevd-event[477]: udev_event_run: seq 395 finished

>udevd-event[478]: udev_rules_get_name: rule applied, 'tty10' becomes 'tty10'

>udevd-event[478]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty10: No such file or directory

>udevd-event[478]: udev_node_add: creating device node '/dev/tty10', major = '4', minor = '10', mode = '0660', uid = '0', gid = '5'

>udevd-event[479]: udev_rules_get_name: rule applied, 'tty9' becomes 'tty9'

>udevd-event[479]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty9: No such file or directory

>udevd[390]: udev_event_run: seq 398 forked, pid [480], 'add' 'tty', 1 seconds old

>udevd[390]: udev_done: seq 390, pid [472] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 391, pid [473] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 393, pid [475] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 394, pid [476] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 395, pid [477] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 399 forked, pid [481], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 400 forked, pid [482], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 401 forked, pid [483], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 402 forked, pid [484], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 403 forked, pid [485], 'add' 'tty', 0 seconds old

>udevd-event[474]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty14: No such file or directory

>udevd-event[474]: udev_node_add: creating device node '/dev/tty14', major = '4', minor = '14', mode = '0660', uid = '0', gid = '5'

>udevd-event[474]: udev_event_run: seq 392 finished

>udevd-event[478]: udev_node_mknod: preserve file '/dev/tty10', because it has correct dev_t

>udevd-event[478]: udev_event_run: seq 396 finished

>udevd-event[479]: udev_node_add: creating device node '/dev/tty9', major = '4', minor = '9', mode = '0660', uid = '0', gid = '5'

>udevd-event[479]: udev_node_mknod: preserve file '/dev/tty9', because it has correct dev_t

>udevd-event[479]: udev_event_run: seq 397 finished

>udevd-event[480]: udev_rules_get_name: rule applied, 'tty8' becomes 'tty8'

>udevd-event[481]: udev_rules_get_name: rule applied, 'tty7' becomes 'tty7'

>udevd-event[481]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty7: No such file or directory

>udevd-event[481]: udev_node_add: creating device node '/dev/tty7', major = '4', minor = '7', mode = '0660', uid = '0', gid = '5'

>udevd-event[481]: udev_node_mknod: preserve file '/dev/tty7', because it has correct dev_t

>udevd-event[481]: udev_event_run: seq 399 finished

>udevd-event[482]: udev_rules_get_name: rule applied, 'tty6' becomes 'tty6'

>udevd-event[482]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty6: No such file or directory

>udevd-event[482]: udev_node_add: creating device node '/dev/tty6', major = '4', minor = '6', mode = '0660', uid = '0', gid = '5'

>udevd-event[482]: udev_node_mknod: preserve file '/dev/tty6', because it has correct dev_t

>udevd-event[482]: udev_event_run: seq 400 finished

>udevd-event[483]: udev_rules_get_name: rule applied, 'tty5' becomes 'tty5'

>udevd-event[483]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty5: No such file or directory

>udevd-event[483]: udev_node_add: creating device node '/dev/tty5', major = '4', minor = '5', mode = '0660', uid = '0', gid = '5'

>udevd-event[483]: udev_node_mknod: preserve file '/dev/tty5', because it has correct dev_t

>udevd-event[483]: udev_event_run: seq 401 finished

>udevd-event[484]: udev_rules_get_name: rule applied, 'tty4' becomes 'tty4'

>udevd-event[484]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty4: No such file or directory

>udevd-event[484]: udev_node_add: creating device node '/dev/tty4', major = '4', minor = '4', mode = '0660', uid = '0', gid = '5'

>udevd-event[485]: udev_rules_get_name: rule applied, 'tty3' becomes 'tty3'

>udevd-event[485]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty3: No such file or directory

>udevd[390]: udev_event_run: seq 404 forked, pid [486], 'add' 'tty', 0 seconds old

>udevd[390]: udev_done: seq 392, pid [474] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 396, pid [478] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 397, pid [479] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 399, pid [481] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 400, pid [482] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 401, pid [483] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 405 forked, pid [487], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 406 forked, pid [488], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 407 forked, pid [489], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 408 forked, pid [490], 'add' 'tty', 0 seconds old

>udevd[390]: udev_event_run: seq 409 forked, pid [491], 'add' 'tty', 0 seconds old

>udevd-event[480]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty8: No such file or directory

>udevd-event[480]: udev_node_add: creating device node '/dev/tty8', major = '4', minor = '8', mode = '0660', uid = '0', gid = '5'

>udevd-event[480]: udev_node_mknod: preserve file '/dev/tty8', because it has correct dev_t

>udevd-event[480]: udev_event_run: seq 398 finished

>udevd-event[484]: udev_node_mknod: preserve file '/dev/tty4', because it has correct dev_t

>udevd-event[484]: udev_event_run: seq 402 finished

>udevd-event[485]: udev_node_add: creating device node '/dev/tty3', major = '4', minor = '3', mode = '0660', uid = '0', gid = '5'

>udevd-event[485]: udev_node_mknod: preserve file '/dev/tty3', because it has correct dev_t

>udevd-event[485]: udev_event_run: seq 403 finished

>udevd-event[486]: udev_rules_get_name: rule applied, 'tty2' becomes 'tty2'

>udevd-event[487]: udev_rules_get_name: rule applied, 'tty1' becomes 'tty1'

>udevd-event[487]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty1: No such file or directory

>udevd-event[487]: udev_node_add: creating device node '/dev/tty1', major = '4', minor = '1', mode = '0660', uid = '0', gid = '5'

>udevd-event[487]: udev_node_mknod: preserve file '/dev/tty1', because it has correct dev_t

>udevd-event[487]: udev_event_run: seq 405 finished

>udevd-event[488]: udev_rules_get_name: rule applied, 'tty0' becomes 'tty0'

>udevd-event[488]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty0: No such file or directory

>udevd-event[488]: udev_node_add: creating device node '/dev/tty0', major = '4', minor = '0', mode = '0660', uid = '0', gid = '5'

>udevd-event[488]: udev_node_mknod: preserve file '/dev/tty0', because it has correct dev_t

>udevd-event[488]: udev_event_run: seq 406 finished

>udevd-event[489]: udev_rules_get_name: rule applied, 'ptmx' becomes 'ptmx'

>udevd-event[489]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@ptmx: No such file or directory

>udevd-event[489]: udev_node_add: creating device node '/dev/ptmx', major = '5', minor = '2', mode = '0666', uid = '0', gid = '5'

>udevd-event[489]: udev_node_mknod: preserve file '/dev/ptmx', because it has correct dev_t

>udevd-event[489]: udev_event_run: seq 407 finished

>udevd-event[490]: udev_rules_get_name: rule applied, 'console' becomes 'console'

>udevd-event[490]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@console: No such file or directory

>udevd-event[490]: udev_node_add: creating device node '/dev/console', major = '5', minor = '1', mode = '0600', uid = '0', gid = '0'

>udevd-event[491]: udev_rules_get_name: rule applied, 'tty' becomes 'tty'

>udevd-event[491]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty: No such file or directory

>udevd[390]: udev_event_run: seq 410 forked, pid [492], 'add' 'ide', 0 seconds old

>udevd[390]: udev_done: seq 398, pid [480] exit with 0, 1 seconds old

>udevd[390]: udev_done: seq 402, pid [484] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 403, pid [485] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 405, pid [487] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 406, pid [488] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 407, pid [489] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 411 forked, pid [493], 'add' 'ide', 0 seconds old

>udevd[390]: udev_event_run: seq 412 forked, pid [494], 'add' 'serio', 0 seconds old

>udevd[390]: udev_event_run: seq 413 forked, pid [495], 'add' 'serio', 0 seconds old

>udevd[390]: udev_event_run: seq 414 forked, pid [496], 'add' 'usb', 0 seconds old

>udevd[390]: udev_event_run: seq 416 forked, pid [497], 'add' 'usb', 0 seconds old

>udevd-event[486]: udev_db_get_device: no db file to read /dev/.udev/db/class@tty@tty2: No such file or directory

>udevd-event[486]: udev_node_add: creating device node '/dev/tty2', major = '4', minor = '2', mode = '0660', uid = '0', gid = '5'

>udevd-event[486]: udev_node_mknod: preserve file '/dev/tty2', because it has correct dev_t

>udevd-event[486]: udev_event_run: seq 404 finished

>udevd-event[490]: udev_node_mknod: preserve file '/dev/console', because it has correct dev_t

>udevd-event[490]: udev_event_run: seq 408 finished

>udevd-event[491]: udev_node_add: creating device node '/dev/tty', major = '5', minor = '0', mode = '0666', uid = '0', gid = '5'

>udevd-event[491]: udev_node_mknod: preserve file '/dev/tty', because it has correct dev_t

>udevd-event[491]: udev_event_run: seq 409 finished

>udevd-event[492]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:01.1/ide1/1.0/bus' appeared after 0 loops

>udevd-event[493]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:01.1/ide0/0.0/bus' appeared after 0 loops

>udevd-event[493]: run_program: 'modprobe  ide:m-disk'

>udevd-event[494]: wait_for_sysfs: file '/sys/devices/platform/i8042/serio1/bus' appeared after 0 loops

>udevd-event[494]: run_program: 'modprobe  serio:ty01pr00id00ex00'

>udevd-event[495]: wait_for_sysfs: file '/sys/devices/platform/i8042/serio0/bus' appeared after 0 loops

>udevd-event[495]: run_program: 'modprobe  serio:ty06pr00id00ex00'

>udevd-event[496]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:01.3/usb1/1-2/1-2:1.0/bus' appeared after 0 loops

>udevd-event[496]: run_program: 'modprobe  usb:v0627p0001d0000dc00dsc00dp00ic03isc01ip02'

>udevd-event[497]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:01.3/usb1/1-0:1.0/bus' appeared after 0 loops

>udevd[390]: udev_event_run: seq 418 forked, pid [498], 'add' 'pnp', 0 seconds old

>udevd[390]: udev_done: seq 404, pid [486] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 408, pid [490] exit with 0, 0 seconds old

>udevd[390]: udev_done: seq 409, pid [491] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 419 forked, pid [507], 'add' 'pnp', 0 seconds old

>udevd[390]: udev_event_run: seq 420 forked, pid [508], 'add' 'pnp', 0 seconds old

>udevd[390]: udev_event_run: seq 421 forked, pid [509], 'add' 'pnp', 0 seconds old

>udevd[390]: udev_event_run: seq 422 forked, pid [510], 'add' 'pnp', 0 seconds old

>udevd[390]: udev_event_run: seq 423 forked, pid [511], 'add' 'pnp', 0 seconds old

>udevd[390]: udev_event_run: seq 424 forked, pid [512], 'add' 'pnp', 0 seconds old

>udevd-event[492]: run_program: 'modprobe  ide:m-cdrom'

>udevd-event[497]: run_program: 'modprobe  usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00'

>udevd-event[498]: wait_for_sysfs: file '/sys/devices/pnp0/00:0b/bus' appeared after 0 loops

>udevd-event[507]: wait_for_sysfs: file '/sys/devices/pnp0/00:0a/bus' appeared after 0 loops

>udevd-event[507]: run_program: '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:0a/id''

>udevd-event[508]: wait_for_sysfs: file '/sys/devices/pnp0/00:09/bus' appeared after 0 loops

>udevd-event[508]: run_program: '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:09/id''

>udevd-event[509]: wait_for_sysfs: file '/sys/devices/pnp0/00:08/bus' appeared after 0 loops

>udevd-event[509]: run_program: '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:08/id''

>udevd-event[510]: wait_for_sysfs: file '/sys/devices/pnp0/00:07/bus' appeared after 0 loops

>udevd-event[510]: run_program: '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:07/id''

>udevd-event[511]: wait_for_sysfs: file '/sys/devices/pnp0/00:06/bus' appeared after 0 loops

>udevd-event[511]: run_program: '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:06/id''

>udevd-event[512]: wait_for_sysfs: file '/sys/devices/pnp0/00:05/bus' appeared after 0 loops

>udevd[390]: udev_event_run: seq 425 forked, pid [529], 'add' 'pnp', 0 seconds old

>udevd[390]: udev_event_run: seq 426 forked, pid [530], 'add' 'pnp', 0 seconds old

>udevd[390]: udev_event_run: seq 427 forked, pid [531], 'add' 'pnp', 0 seconds old

>udevd[390]: udev_event_run: seq 428 forked, pid [532], 'add' 'pnp', 0 seconds old

>udevd[390]: udev_event_run: seq 429 forked, pid [533], 'add' 'pnp', 0 seconds old

>udevd[390]: udev_event_run: seq 430 forked, pid [534], 'add' 'acpi', 0 seconds old

>udevd-event[498]: run_program: '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:0b/id''

>udevd-event[512]: run_program: '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:05/id''

>udevd-event[529]: wait_for_sysfs: file '/sys/devices/pnp0/00:04/bus' appeared after 0 loops

>udevd-event[529]: run_program: '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:04/id''

>udevd-event[530]: wait_for_sysfs: file '/sys/devices/pnp0/00:03/bus' appeared after 0 loops

>udevd-event[530]: run_program: '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:03/id''

>udevd-event[531]: wait_for_sysfs: file '/sys/devices/pnp0/00:02/bus' appeared after 0 loops

>udevd-event[531]: run_program: '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:02/id''

>udevd-event[532]: wait_for_sysfs: file '/sys/devices/pnp0/00:01/bus' appeared after 0 loops

>udevd-event[532]: run_program: '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:01/id''

>udevd-event[533]: wait_for_sysfs: file '/sys/devices/pnp0/00:00/bus' appeared after 0 loops

>udevd-event[533]: run_program: '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:00/id''

>udevd-event[534]: wait_for_sysfs: file '/sys/devices/acpi/bus' appeared after 0 loops

>udevd[390]: udev_event_run: seq 431 forked, pid [556], 'add' 'pci', 0 seconds old

>udevd[390]: udev_event_run: seq 432 forked, pid [557], 'add' 'pci', 0 seconds old

>udevd[390]: udev_event_run: seq 433 forked, pid [558], 'add' 'pci', 0 seconds old

>udevd[390]: udev_event_run: seq 434 forked, pid [559], 'add' 'pci', 0 seconds old

>udevd-event[496]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module usb:v0627p0001d0000dc00dsc00dp00ic03isc01ip02 not found.'

>udevd-event[495]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module serio:ty06pr00id00ex00 not found.'

>udevd-event[495]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[495]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[495]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[493]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module ide:m_disk not found.'

>udevd-event[497]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00 not found.'

>udevd-event[497]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[497]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[497]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[497]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[497]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[497]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[497]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[497]: udev_event_run: seq 416 finished

>udevd-event[493]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[493]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[493]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[493]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[493]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[493]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[493]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[493]: udev_event_run: seq 411 finished

>hdc: ATAPI 4X CD-ROM drive, 512kB Cache, (U)DMA
>Uniform CD-ROM driver Revision: 3.20
>udevd-event[492]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[492]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[492]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[492]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[492]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[492]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[492]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[492]: udev_event_run: seq 410 finished

>udevd-event[494]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[494]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[494]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[494]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[494]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[494]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[494]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[494]: udev_event_run: seq 412 finished

>udevd-event[534]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[534]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[534]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[534]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[534]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[534]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[534]: udev_event_run: seq 430 finished

>udevd-event[556]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:07.0/bus' appeared after 0 loops

>udevd-event[556]: run_program: 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00'

>udevd-event[557]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:06.0/bus' appeared after 0 loops

>udevd-event[557]: run_program: 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00'

>udevd-event[507]: run_program: Waiting 1 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:0a/id'(517)'

>udevd-event[508]: run_program: Waiting 1 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:09/id'(520)'

>udevd-event[510]: run_program: Waiting 1 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:07/id'(526)'

>udevd-event[558]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:04.0/bus' appeared after 0 loops

>udevd-event[509]: run_program: Waiting 1 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:08/id'(523)'

>udevd-event[498]: run_program: Waiting 1 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:0b/id'(535)'

>udevd-event[511]: run_program: Waiting 1 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:06/id'(538)'

>udevd-event[512]: run_program: Waiting 1 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:05/id'(541)'

>udevd-event[529]: run_program: Waiting 1 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:04/id'(544)'

>udevd-event[559]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:03.0/bus' appeared after 0 loops

>udevd-event[496]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[496]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[530]: run_program: Waiting 1 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:03/id'(547)'

>udevd-event[531]: run_program: Waiting 1 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:02/id'(550)'

>udevd-event[496]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[529]: run_program: '/bin/sh' returned with status 0

>udevd-event[529]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[529]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[529]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[556]: run_program: Waiting 1 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[529]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[529]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[529]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[532]: run_program: Waiting 1 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:01/id'(553)'

>udevd-event[533]: run_program: Waiting 1 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:00/id'(574)'

>udevd-event[507]: run_program: Waiting 2 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:0a/id'(517)'

>udevd-event[508]: run_program: Waiting 2 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:09/id'(520)'

>udevd-event[510]: run_program: Waiting 2 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:07/id'(526)'

>udevd-event[509]: run_program: Waiting 2 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:08/id'(523)'

>udevd-event[498]: run_program: Waiting 2 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:0b/id'(535)'

>udevd-event[511]: run_program: Waiting 2 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:06/id'(538)'

>udevd-event[512]: run_program: Waiting 2 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:05/id'(541)'

>udevd-event[495]: run_program: Waiting 1 seconds for output of '/lib/udev/udev_run_hotplugd(560)'

>udevd-event[507]: run_program: '/bin/sh' returned with status 0

>udevd-event[530]: run_program: Waiting 2 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:03/id'(547)'

>udevd-event[531]: run_program: Waiting 2 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:02/id'(550)'

>udevd-event[507]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[507]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[507]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[507]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[556]: run_program: Waiting 2 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[507]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[507]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[498]: run_program: '/bin/sh' returned with status 0

>udevd-event[498]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[532]: run_program: Waiting 2 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:01/id'(553)'

>udevd-event[533]: run_program: Waiting 2 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:00/id'(574)'

>udevd-event[508]: run_program: Waiting 3 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:09/id'(520)'

>udevd-event[510]: run_program: Waiting 3 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:07/id'(526)'

>udevd-event[509]: run_program: Waiting 3 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:08/id'(523)'

>udevd-event[511]: run_program: Waiting 3 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:06/id'(538)'

>udevd-event[512]: run_program: Waiting 3 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:05/id'(541)'

>udevd-event[495]: run_program: Waiting 2 seconds for output of '/lib/udev/udev_run_hotplugd(560)'

>udevd-event[498]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[530]: run_program: Waiting 3 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:03/id'(547)'

>udevd-event[531]: run_program: Waiting 3 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:02/id'(550)'

>udevd-event[498]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[498]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[498]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[511]: run_program: '/bin/sh' returned with status 0

>udevd-event[511]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[556]: run_program: Waiting 3 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[511]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[511]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[511]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[532]: run_program: Waiting 3 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:01/id'(553)'

>udevd-event[533]: run_program: Waiting 3 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:00/id'(574)'

>udevd-event[511]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[508]: run_program: Waiting 4 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:09/id'(520)'

>udevd-event[510]: run_program: Waiting 4 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:07/id'(526)'

>udevd-event[509]: run_program: Waiting 4 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:08/id'(523)'

>udevd-event[512]: run_program: Waiting 4 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:05/id'(541)'

>udevd-event[495]: run_program: Waiting 3 seconds for output of '/lib/udev/udev_run_hotplugd(560)'

>udevd-event[510]: run_program: '/bin/sh' returned with status 0

>udevd-event[530]: run_program: Waiting 4 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:03/id'(547)'

>udevd-event[531]: run_program: Waiting 4 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:02/id'(550)'

>udevd-event[510]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[510]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[510]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[510]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[556]: run_program: Waiting 4 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[510]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[531]: run_program: '/bin/sh' returned with status 0

>udevd-event[532]: run_program: Waiting 4 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:01/id'(553)'

>udevd-event[533]: run_program: Waiting 4 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:00/id'(574)'

>udevd-event[531]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[508]: run_program: Waiting 5 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:09/id'(520)'

>udevd-event[509]: run_program: Waiting 5 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:08/id'(523)'

>udevd-event[512]: run_program: Waiting 5 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:05/id'(541)'

>udevd-event[495]: run_program: Waiting 4 seconds for output of '/lib/udev/udev_run_hotplugd(560)'

>udevd-event[531]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[530]: run_program: Waiting 5 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:03/id'(547)'

>udevd-event[531]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[531]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[531]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[531]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[556]: run_program: Waiting 5 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[533]: run_program: '/bin/sh' returned with status 0

>udevd-event[533]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[533]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[532]: run_program: Waiting 5 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:01/id'(553)'

>udevd-event[533]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[508]: run_program: Waiting 6 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:09/id'(520)'

>udevd-event[509]: run_program: Waiting 6 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:08/id'(523)'

>udevd-event[512]: run_program: Waiting 6 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:05/id'(541)'

>udevd-event[495]: run_program: Waiting 5 seconds for output of '/lib/udev/udev_run_hotplugd(560)'

>udevd-event[533]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[530]: run_program: Waiting 6 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:03/id'(547)'

>udevd-event[533]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[512]: run_program: '/bin/sh' returned with status 0

>udevd-event[512]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[529]: udev_event_run: seq 425 finished

>udevd-event[556]: run_program: Waiting 6 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[507]: udev_event_run: seq 419 finished

>udevd-event[498]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[532]: run_program: Waiting 6 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:01/id'(553)'

>udevd-event[511]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[508]: run_program: Waiting 7 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:09/id'(520)'

>udevd-event[509]: run_program: Waiting 7 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:08/id'(523)'

>udevd-event[495]: run_program: Waiting 6 seconds for output of '/lib/udev/udev_run_hotplugd(560)'

>udevd-event[510]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[530]: run_program: Waiting 7 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:03/id'(547)'

>udevd-event[498]: udev_event_run: seq 418 finished

>udevd-event[511]: udev_event_run: seq 423 finished

>udevd-event[510]: udev_event_run: seq 422 finished

>udevd[390]: udev_event_run: seq 435 forked, pid [600], 'add' 'pci', 31 seconds old

>udevd-event[556]: run_program: Waiting 7 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd[390]: udev_done: seq 410, pid [492] exit with 0, 33 seconds old

>udevd-event[530]: run_program: '/bin/sh' returned with status 0

>udevd-event[532]: run_program: Waiting 7 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:01/id'(553)'

>udevd-event[530]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[530]: run_program: '/lib/udev/udev_run_hotplugd'

>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>All bugs added by David S. Miller <davem@redhat.com>
>udevd-event[558]: run_program: 'modprobe  pci:v00008086d0000100Esv00000000sd00000000bc02sc00i00'

>udevd-event[495]: run_program: Waiting 7 seconds for output of '/lib/udev/udev_run_hotplugd(560)'

>udevd-event[559]: run_program: 'modprobe  pci:v00005853d00000001sv00005853sd00000001bc01sc00i00'

>udevd-event[600]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:02.0/bus' appeared after 0 loops

>udevd-event[600]: run_program: 'modprobe  pci:v00001013d000000B8sv00005853sd00000001bc03sc00i00'

>udevd-event[532]: run_program: '/bin/sh' returned with status 0

>udevd-event[532]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[532]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[512]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[512]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[512]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[512]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[557]: run_program: Waiting 1 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(602)'

>udevd-event[530]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[532]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[530]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[532]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[508]: run_program: Waiting 8 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:09/id'(520)'

>udevd-event[509]: run_program: Waiting 8 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:08/id'(523)'

>udevd-event[556]: run_program: Waiting 8 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[495]: run_program: Waiting 8 seconds for output of '/lib/udev/udev_run_hotplugd(560)'

>udevd-event[530]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[532]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[531]: udev_event_run: seq 427 finished

>udevd-event[533]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[512]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[530]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[557]: run_program: Waiting 2 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(602)'

>udevd-event[532]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[533]: udev_event_run: seq 429 finished

>udevd-event[558]: run_program: Waiting 1 seconds for output of 'modprobe  pci:v00008086d0000100Esv00000000sd00000000bc02sc00i00(604)'

>udevd-event[512]: udev_event_run: seq 424 finished

>udevd-event[508]: run_program: Waiting 9 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:09/id'(520)'

>udevd-event[509]: run_program: Waiting 9 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:08/id'(523)'

>udevd-event[556]: run_program: Waiting 9 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[495]: run_program: Waiting 9 seconds for output of '/lib/udev/udev_run_hotplugd(560)'

>udevd-event[530]: udev_event_run: seq 426 finished

>udevd-event[532]: udev_event_run: seq 428 finished

>udevd-event[495]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[495]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[495]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[495]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[495]: udev_event_run: seq 413 finished

>udevd-event[557]: run_program: Waiting 3 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(602)'

>udevd-event[496]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[496]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[558]: run_program: Waiting 2 seconds for output of 'modprobe  pci:v00008086d0000100Esv00000000sd00000000bc02sc00i00(604)'

>udevd-event[496]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[508]: run_program: Waiting 10 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:09/id'(520)'

>udevd-event[509]: run_program: Waiting 10 seconds for output of '/bin/sh -c 'while read id; do /lib/udev/modprobe pnp:d$id; done < /sys//devices/pnp0/00:08/id'(523)'

>udevd-event[556]: run_program: Waiting 10 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[509]: run_program: '/bin/sh' returned with status 0

>udevd-event[559]: run_program: Waiting 1 seconds for output of 'modprobe  pci:v00005853d00000001sv00005853sd00000001bc01sc00i00(606)'

>udevd-event[509]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[509]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[508]: run_program: '/bin/sh' returned with status 0

>udevd-event[508]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[508]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[557]: run_program: Waiting 4 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(602)'

>udevd[390]: udev_done: seq 411, pid [493] exit with 1, 46 seconds old

>udevd[390]: udev_done: seq 412, pid [494] exit with 0, 46 seconds old

>udevd-event[558]: run_program: Waiting 3 seconds for output of 'modprobe  pci:v00008086d0000100Esv00000000sd00000000bc02sc00i00(604)'

>udevd[390]: udev_done: seq 413, pid [495] exit with 1, 47 seconds old

>udevd[390]: udev_done: seq 416, pid [497] exit with 1, 47 seconds old

>udevd-event[556]: run_program: Waiting 11 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 28 (level, low) -> IRQ 177
>udevd-event[559]: run_program: Waiting 2 seconds for output of 'modprobe  pci:v00005853d00000001sv00005853sd00000001bc01sc00i00(606)'

>udevd-event[600]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module pci:v00001013d000000B8sv00005853sd00000001bc03sc00i00 not found.'

>udevd-event[509]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[508]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.1.0-k
>Copyright (c) 2009 - 2010 Intel Corporation.
>udevd-event[509]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[557]: run_program: Waiting 5 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(602)'

>udevd-event[508]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[509]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[558]: run_program: Waiting 4 seconds for output of 'modprobe  pci:v00008086d0000100Esv00000000sd00000000bc02sc00i00(604)'

>udevd-event[508]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[509]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[508]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[559]: run_program: Waiting 3 seconds for output of 'modprobe  pci:v00005853d00000001sv00005853sd00000001bc01sc00i00(606)'

>udevd-event[509]: udev_event_run: seq 421 finished

>udevd-event[556]: run_program: Waiting 12 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[508]: udev_event_run: seq 420 finished

>Xen version 3.1.
>Hypercall area is 1 pages.
>Grant table initialized
>udevd[390]: udev_done: seq 418, pid [498] exit with 0, 51 seconds old

>udevd[390]: udev_done: seq 419, pid [507] exit with 0, 51 seconds old

>ixgbevf 0000:00:06.0: ixgbevf_probe() entry
>ixgbevf 0000:00:06.0: ixgbevf_probe() pci_using_dac=1
>udevd-event[557]: run_program: Waiting 6 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(602)'

>PCI: Setting latency timer of device 0000:00:06.0 to 64
>ixgbevf 0000:00:06.0: ixgbevf_assign_netdev_ops() entry
>ixgbevf 0000:00:06.0: ixgbevf_assign_netdev_ops() exit
>ixgbevf 0000:00:06.0: ixgbevf_sw_init() entry
>Intel(R) PRO/1000 Network Driver - version 7.3.21-k4-3-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>udevd-event[558]: run_program: Waiting 5 seconds for output of 'modprobe  pci:v00008086d0000100Esv00000000sd00000000bc02sc00i00(604)'

>ixgbevf 0000:00:06.0: ixgbevf_sw_init() init_hw OK
>ixgbevf 0000:00:06.0: ixgbevf_sw_init() exit (0)
>ixgbevf 0000:00:06.0: ixgbevf_probe() ixgbevf_sw_init=0 (ignored)
>ixgbevf 0000:00:06.0: ixgbevf_init_interrupt_scheme() entry
>ixgbevf 0000:00:06.0: ixgbevf_set_num_queues() entry
>ixgbevf 0000:00:06.0: ixgbevf_set_num_queues() exit
>ixgbevf 0000:00:06.0: ixgbevf_set_interrupt_capability() entry
>ixgbevf 0000:00:06.0: ixgbevf_set_interrupt_capability() num_rx_queues=1 num_tx_queues=1 v_budget=3
>ixgbevf 0000:00:06.0: ixgbevf_set_interrupt_capability() v_budget alloc OK
>ixgbevf 0000:00:06.0: ixgbevf_acquire_msix_vectors() entry: vectors=3
>ixgbevf 0000:00:06.0: ixgbevf_acquire_msix_vectors() acquiring vectors=3
>ixgbevf 0000:00:06.0: ixgbevf_acquire_msix_vectors() success
>ixgbevf 0000:00:06.0: ixgbevf_acquire_msix_vectors(): allocated 3 MSI-X interrupts
>ixgbevf 0000:00:06.0: ixgbevf_acquire_msix_vectors() exit
>ixgbevf 0000:00:06.0: ixgbevf_set_interrupt_capability() exit (0)
>ixgbevf 0000:00:06.0: ixgbevf_alloc_q_vectors() entry num_msix_vectors=3 num_q_vectors=2 napi_vectors=1
>udevd-event[559]: run_program: Waiting 4 seconds for output of 'modprobe  pci:v00005853d00000001sv00005853sd00000001bc01sc00i00(606)'

>ixgbevf 0000:00:06.0: ixgbevf_alloc_q_vectors() exit (success)
>ixgbevf 0000:00:06.0: ixgbevf_alloc_queues() entry num_tx_queues=1 num_rx_queues=1 tx_ring_count=1024 rx_ring_count=512
>udevd-event[556]: run_program: Waiting 13 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>ixgbevf 0000:00:06.0: ixgbevf_alloc_queues() tx_ring[0] @ ffff810001910640
>ixgbevf 0000:00:06.0: ixgbevf_alloc_queues() rx_ring[0] @ ffff81003f8500c0
>ixgbevf 0000:00:06.0: ixgbevf_alloc_queues() exit (success)
>ixgbevf 0000:00:06.0: ixgbevf_init_interrupt_scheme() exit (success) num_rx_queues=1 num_tx_queues=1
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_probe() registered with name=eth0
>ixgbevf 0000:00:06.0: ixgbevf_init_last_counter_stats() entry
>ixgbevf 0000:00:06.0: ixgbevf_init_last_counter_stats() exit
>ixgbevf 0000:00:06.0: ixgbevf_probe() exit (OK) hw_mac_type=1 mac=02:9C:00:8D:36:F0 cards_found=1
>ixgbevf 0000:00:07.0: ixgbevf_probe() entry
>ixgbevf 0000:00:07.0: ixgbevf_probe() pci_using_dac=1
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ixgbevf 0000:00:07.0: ixgbevf_assign_netdev_ops() entry
>ixgbevf 0000:00:07.0: ixgbevf_assign_netdev_ops() exit
>ixgbevf 0000:00:07.0: ixgbevf_sw_init() entry
>udevd-event[557]: run_program: Waiting 7 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(602)'

>ixgbevf 0000:00:07.0: ixgbevf_sw_init() init_hw OK
>ixgbevf 0000:00:07.0: ixgbevf_sw_init() exit (0)
>ixgbevf 0000:00:07.0: ixgbevf_probe() ixgbevf_sw_init=0 (ignored)
>ixgbevf 0000:00:07.0: ixgbevf_init_interrupt_scheme() entry
>ixgbevf 0000:00:07.0: ixgbevf_set_num_queues() entry
>ixgbevf 0000:00:07.0: ixgbevf_set_num_queues() exit
>ixgbevf 0000:00:07.0: ixgbevf_set_interrupt_capability() entry
>ixgbevf 0000:00:07.0: ixgbevf_set_interrupt_capability() num_rx_queues=1 num_tx_queues=1 v_budget=3
>ixgbevf 0000:00:07.0: ixgbevf_set_interrupt_capability() v_budget alloc OK
>ixgbevf 0000:00:07.0: ixgbevf_acquire_msix_vectors() entry: vectors=3
>ixgbevf 0000:00:07.0: ixgbevf_acquire_msix_vectors() acquiring vectors=3
>udevd-event[558]: run_program: Waiting 6 seconds for output of 'modprobe  pci:v00008086d0000100Esv00000000sd00000000bc02sc00i00(604)'

>ixgbevf 0000:00:07.0: ixgbevf_acquire_msix_vectors() success
>ixgbevf 0000:00:07.0: ixgbevf_acquire_msix_vectors(): allocated 3 MSI-X interrupts
>ixgbevf 0000:00:07.0: ixgbevf_acquire_msix_vectors() exit
>ixgbevf 0000:00:07.0: ixgbevf_set_interrupt_capability() exit (0)
>ixgbevf 0000:00:07.0: ixgbevf_alloc_q_vectors() entry num_msix_vectors=3 num_q_vectors=2 napi_vectors=1
>udevd[390]: udev_done: seq 420, pid [508] exit with 0, 57 seconds old

>udevd[390]: udev_done: seq 421, pid [509] exit with 0, 57 seconds old

>udevd-event[559]: run_program: Waiting 5 seconds for output of 'modprobe  pci:v00005853d00000001sv00005853sd00000001bc01sc00i00(606)'

>udevd-event[496]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[556]: run_program: Waiting 14 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[496]: udev_event_run: seq 414 finished

>udevd-event[600]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[600]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[600]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[557]: run_program: Waiting 8 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(602)'

>ixgbevf 0000:00:07.0: ixgbevf_alloc_q_vectors() exit (success)
>ixgbevf 0000:00:07.0: ixgbevf_alloc_queues() entry num_tx_queues=1 num_rx_queues=1 tx_ring_count=1024 rx_ring_count=512
>ixgbevf 0000:00:07.0: ixgbevf_alloc_queues() tx_ring[0] @ ffff81003f850d40
>ixgbevf 0000:00:07.0: ixgbevf_alloc_queues() rx_ring[0] @ ffff81003eb78e40
>ixgbevf 0000:00:07.0: ixgbevf_alloc_queues() exit (success)
>ixgbevf 0000:00:07.0: ixgbevf_init_interrupt_scheme() exit (success) num_rx_queues=1 num_tx_queues=1
>udevd-event[558]: run_program: Waiting 7 seconds for output of 'modprobe  pci:v00008086d0000100Esv00000000sd00000000bc02sc00i00(604)'

>udevd[390]: udev_done: seq 414, pid [496] exit with 1, 59 seconds old

>udevd[390]: udev_done: seq 422, pid [510] exit with 0, 59 seconds old

>udevd[390]: udev_done: seq 423, pid [511] exit with 0, 60 seconds old

>udevd-event[559]: run_program: Waiting 6 seconds for output of 'modprobe  pci:v00005853d00000001sv00005853sd00000001bc01sc00i00(606)'

>udevd[390]: udev_done: seq 424, pid [512] exit with 0, 60 seconds old

>udevd-event[556]: run_program: Waiting 15 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[600]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[600]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[600]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_probe() registered with name=eth1
>ixgbevf 0000:00:07.0: ixgbevf_init_last_counter_stats() entry
>ixgbevf 0000:00:07.0: ixgbevf_init_last_counter_stats() exit
>ixgbevf 0000:00:07.0: ixgbevf_probe() exit (OK) hw_mac_type=1 mac=4A:45:2E:CF:3B:E0 cards_found=2
>udevd-event[557]: run_program: Waiting 9 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(602)'

>GSI 18 sharing vector 0x32 and IRQ 18
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 32 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>udevd[390]: udev_done: seq 425, pid [529] exit with 0, 62 seconds old

>udevd-event[559]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[557]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[558]: run_program: Waiting 8 seconds for output of 'modprobe  pci:v00008086d0000100Esv00000000sd00000000bc02sc00i00(604)'

>udevd-event[559]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[557]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[559]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[557]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[559]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[559]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[559]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[557]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[556]: run_program: Waiting 16 seconds for output of 'modprobe  pci:v00008086d000010EDsv00008086sd00007A11bc02sc00i00(579)'

>udevd-event[557]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[557]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[557]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[557]: udev_event_run: seq 432 finished

>udevd-event[558]: run_program: Waiting 9 seconds for output of 'modprobe  pci:v00008086d0000100Esv00000000sd00000000bc02sc00i00(604)'

>udevd-event[559]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[556]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[556]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[556]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[556]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[556]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[556]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[556]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[559]: udev_event_run: seq 434 finished

>e1000: 0000:00:04.0: e1000_probe: (PCI:33MHz:32-bit) 00:26:9f:15:15:25
>udevd-event[556]: udev_event_run: seq 431 finished

>udevd[390]: udev_done: seq 426, pid [530] exit with 0, 67 seconds old

>udevd[390]: udev_done: seq 427, pid [531] exit with 0, 67 seconds old

>e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
>udevd[390]: udev_done: seq 428, pid [532] exit with 0, 67 seconds old

>udevd-event[558]: run_program: Waiting 10 seconds for 'modprobe  pci:v00008086d0000100Esv00000000sd00000000bc02sc00i00(604)'

>udevd-event[558]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[558]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd[390]: udev_done: seq 429, pid [533] exit with 0, 66 seconds old

>udevd[390]: udev_done: seq 430, pid [534] exit with 0, 67 seconds old

>udevd-event[600]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[600]: udev_event_run: seq 435 finished

>udevd-event[558]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[558]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[558]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[558]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[558]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[558]: udev_event_run: seq 433 finished

>udevd[390]: udev_done: seq 431, pid [556] exit with 0, 68 seconds old

>udevd[390]: udev_done: seq 432, pid [557] exit with 0, 68 seconds old

>udevd[390]: udev_done: seq 433, pid [558] exit with 0, 68 seconds old

>udevd[390]: udev_done: seq 434, pid [559] exit with 0, 68 seconds old

>udevd[390]: udev_done: seq 435, pid [600] exit with 1, 69 seconds old

>udevd[390]: udev_event_run: seq 415 forked, pid [638], 'add' 'usb', 70 seconds old

>udevd-event[638]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:01.3/usb1/1-2/bus' appeared after 0 loops

>udevd[390]: udev_event_run: seq 437 forked, pid [639], 'add' 'pci', 69 seconds old

>udevd[390]: udev_event_run: seq 438 forked, pid [640], 'add' 'pci', 69 seconds old

>udevd-event[638]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[638]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[638]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[639]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:01.2/bus' appeared after 0 loops

>udevd-event[639]: run_program: 'modprobe  pci:v00008086d00007113sv00000000sd00000000bc06sc80i00'

>udevd-event[640]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:01.1/bus' appeared after 0 loops

>udevd[390]: udev_event_run: seq 439 forked, pid [642], 'add' 'pci', 71 seconds old

>udevd[390]: udev_event_run: seq 440 forked, pid [643], 'add' 'pci', 71 seconds old

>udevd-event[638]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[638]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[638]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[640]: run_program: 'modprobe  pci:v00008086d00007010sv00005853sd00000001bc01sc01i80'

>udevd-event[642]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:01.0/bus' appeared after 0 loops

>udevd-event[642]: run_program: 'modprobe  pci:v00008086d00007000sv00000000sd00000000bc06sc01i00'

>udevd-event[643]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:00.0/bus' appeared after 0 loops

>udevd[390]: udev_event_run: seq 441 forked, pid [649], 'add' 'platform', 72 seconds old

>udevd[390]: udev_event_run: seq 442 forked, pid [650], 'add' 'platform', 72 seconds old

>udevd-event[638]: udev_event_run: seq 415 finished

>udevd-event[642]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module pci:v00008086d00007000sv00000000sd00000000bc06sc01i00 not found.'

>udevd-event[640]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[640]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[643]: run_program: 'modprobe  pci:v00008086d00001237sv00000000sd00000000bc06sc00i00'

>udevd-event[639]: run_program: Waiting 1 seconds for 'modprobe  pci:v00008086d00007113sv00000000sd00000000bc06sc80i00(645)'

>udevd-event[643]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module pci:v00008086d00001237sv00000000sd00000000bc06sc00i00 not found.'

>udevd-event[649]: wait_for_sysfs: file '/sys/devices/platform/i8042/bus' appeared after 0 loops

>udevd-event[649]: run_program: 'modprobe  i8042'

>udevd-event[650]: wait_for_sysfs: file '/sys/devices/platform/serial8250/bus' appeared after 0 loops

>udevd-event[639]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[639]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[639]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[640]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[640]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[640]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[640]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[639]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[639]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[639]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[640]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[639]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[640]: udev_event_run: seq 438 finished

>udevd-event[639]: udev_event_run: seq 437 finished

>udevd[390]: udev_event_run: seq 443 forked, pid [661], 'add' 'platform', 77 seconds old

>udevd[390]: udev_event_run: seq 444 forked, pid [662], 'add' 'platform', 78 seconds old

>udevd-event[642]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[642]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[642]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[643]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[643]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[643]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[649]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module i8042 not found.'

>udevd-event[649]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[649]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[650]: run_program: 'modprobe  serial8250'

>udevd-event[650]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module serial8250 not found.'

>udevd-event[661]: wait_for_sysfs: file '/sys/devices/platform/vesafb.0/bus' appeared after 0 loops

>udevd-event[661]: run_program: 'modprobe  vesafb'

>udevd-event[662]: wait_for_sysfs: file '/sys/devices/platform/pcspkr/bus' appeared after 0 loops

>udevd[390]: udev_event_run: seq 447 forked, pid [667], 'add' 'usb_endpoint', 80 seconds old

>udevd[390]: udev_event_run: seq 449 forked, pid [668], 'add' 'raw', 80 seconds old

>udevd-event[642]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[642]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[642]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[643]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[643]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[643]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[649]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[649]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[649]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[649]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[650]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[650]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[650]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[661]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module vesafb not found.'

>udevd-event[661]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[661]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[662]: run_program: 'modprobe  pcspkr'

>udevd-event[667]: udev_rules_get_name: no node name set, will use kernel name 'usbdev1.1_ep81'

>udevd-event[667]: udev_db_get_device: no db file to read /dev/.udev/db/devices@pci0000:00@0000:00:01.3@usb1@1-0:1.0@usbdev1.1_ep81: No such file or directory

>udevd-event[668]: udev_rules_get_name: no node name set, will use kernel name 'rawctl'

>input: PC Speaker as /class/input/input3
>udevd[390]: udev_event_run: seq 450 forked, pid [680], 'add' 'vc', 84 seconds old

>udevd-event[662]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[662]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[662]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[662]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[662]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[662]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[662]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[662]: udev_event_run: seq 444 finished

>udevd[390]: udev_event_run: seq 451 forked, pid [683], 'add' 'vc', 85 seconds old

>udevd-event[642]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[642]: udev_event_run: seq 439 finished

>udevd-event[643]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[643]: udev_event_run: seq 440 finished

>udevd-event[649]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[649]: udev_event_run: seq 441 finished

>udevd-event[650]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[650]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[650]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[661]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[661]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[661]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[661]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[667]: udev_node_add: creating device node '/dev/usbdev1.1_ep81', major = '442', minor = '0', mode = '0600', uid = '0', gid = '0'

>udevd-event[667]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[668]: udev_db_get_device: no db file to read /dev/.udev/db/class@raw@rawctl: No such file or directory

>udevd-event[668]: udev_node_add: creating device node '/dev/rawctl', major = '162', minor = '0', mode = '0600', uid = '0', gid = '0'

>udevd-event[680]: udev_rules_get_name: rule applied, 'vcsa' becomes 'vcsa'

>udevd-event[680]: udev_db_get_device: no db file to read /dev/.udev/db/class@vc@vcsa: No such file or directory

>udevd-event[683]: udev_rules_get_name: rule applied, 'vcs' becomes 'vcs'

>udevd[390]: udev_event_run: seq 452 forked, pid [688], 'add' 'cpuid', 89 seconds old

>udevd[390]: udev_event_run: seq 453 forked, pid [689], 'add' 'msr', 89 seconds old

>udevd-event[650]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[650]: udev_event_run: seq 442 finished

>udevd-event[661]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[661]: udev_event_run: seq 443 finished

>udevd-event[667]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[667]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[667]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[667]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[668]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[668]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[668]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[680]: udev_node_add: creating device node '/dev/vcsa', major = '7', minor = '128', mode = '0600', uid = '69', gid = '5'

>udevd-event[680]: udev_event_run: seq 450 finished

>udevd-event[683]: udev_db_get_device: no db file to read /dev/.udev/db/class@vc@vcs: No such file or directory

>udevd-event[683]: udev_node_add: creating device node '/dev/vcs', major = '7', minor = '0', mode = '0600', uid = '69', gid = '5'

>udevd-event[688]: udev_rules_get_name: rule applied, 'cpu0' becomes 'cpu/0/cpuid'

>udevd-event[688]: udev_db_get_device: no db file to read /dev/.udev/db/class@cpuid@cpu0: No such file or directory

>udevd-event[689]: udev_rules_get_name: rule applied, 'msr0' becomes 'cpu/0/msr'

>udevd[390]: udev_event_run: seq 454 forked, pid [693], 'add' 'net', 93 seconds old

>udevd[390]: udev_done: seq 415, pid [638] exit with 0, 94 seconds old

>udevd-event[667]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[667]: run_program: '/sbin/pam_console_apply /dev/usbdev1.1_ep81 '

>udevd-event[667]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[668]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[668]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[668]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[683]: udev_event_run: seq 451 finished

>udevd-event[688]: udev_node_add: creating device node '/dev/cpu/0/cpuid', major = '203', minor = '0', mode = '0600', uid = '0', gid = '0'

>udevd-event[688]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[689]: udev_db_get_device: no db file to read /dev/.udev/db/class@msr@msr0: No such file or directory

>udevd-event[689]: udev_node_add: creating device node '/dev/cpu/0/msr', major = '202', minor = '0', mode = '0600', uid = '0', gid = '0'

>udevd-event[693]: wait_for_sysfs: file '/sys/class/net/lo/address' appeared after 0 loops

>udevd-event[693]: run_program: '/lib/udev/rename_device'

>udevd[390]: udev_done: seq 437, pid [639] exit with 0, 95 seconds old

>udevd[390]: udev_done: seq 438, pid [640] exit with 0, 96 seconds old

>udevd[390]: udev_done: seq 439, pid [642] exit with 1, 96 seconds old

>udevd[390]: udev_done: seq 440, pid [643] exit with 1, 96 seconds old

>udevd-event[667]: udev_event_run: seq 447 finished

>udevd-event[668]: run_program: '/sbin/pam_console_apply /dev/rawctl '

>udevd-event[668]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[668]: udev_event_run: seq 449 finished

>udevd-event[688]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[688]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[688]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[688]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[689]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[689]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[689]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd[390]: udev_done: seq 441, pid [649] exit with 1, 98 seconds old

>udevd[390]: udev_done: seq 442, pid [650] exit with 1, 98 seconds old

>udevd[390]: udev_done: seq 443, pid [661] exit with 1, 98 seconds old

>udevd[390]: udev_done: seq 444, pid [662] exit with 0, 98 seconds old

>udevd-event[688]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[688]: run_program: '/sbin/pam_console_apply /dev/cpu/0/cpuid '

>udevd-event[688]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[689]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[689]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[689]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd[390]: udev_done: seq 447, pid [667] exit with 0, 99 seconds old

>udevd[390]: udev_done: seq 449, pid [668] exit with 0, 99 seconds old

>udevd[390]: udev_done: seq 450, pid [680] exit with 0, 99 seconds old

>udevd-event[693]: run_program: Waiting 1 seconds for output of '/lib/udev/rename_device(700)'

>udevd[390]: udev_done: seq 451, pid [683] exit with 0, 100 seconds old

>udevd-event[688]: udev_event_run: seq 452 finished

>udevd-event[689]: run_program: '/sbin/pam_console_apply /dev/cpu/0/msr '

>udevd-event[689]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[689]: udev_event_run: seq 453 finished

>udevd[390]: udev_done: seq 452, pid [688] exit with 0, 100 seconds old

>udevd[390]: udev_done: seq 453, pid [689] exit with 0, 101 seconds old

>udevd[390]: udev_event_run: seq 417 forked, pid [704], 'add' 'usb', 102 seconds old

>udevd-event[704]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:01.3/usb1/bus' appeared after 0 loops

>udevd[390]: udev_event_run: seq 458 forked, pid [705], 'add' 'input', 8 seconds old

>udevd-event[693]: run_program: Waiting 2 seconds for output of '/lib/udev/rename_device(700)'

>udevd[390]: udev_event_run: seq 459 forked, pid [706], 'add' 'input', 0 seconds old

>udevd-event[704]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[704]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[704]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[705]: udev_rules_get_name: rule applied, 'event1' becomes 'input/event1'

>udevd-event[705]: udev_db_get_device: no db file to read /dev/.udev/db/class@input@input1@event1: No such file or directory

>udevd-event[706]: udev_rules_get_name: rule applied, 'mouse0' becomes 'input/mouse0'

>udevd[390]: udev_event_run: seq 461 forked, pid [708], 'add' 'input', 0 seconds old

>udevd[390]: udev_event_run: seq 463 forked, pid [709], 'add' 'input', 0 seconds old

>udevd-event[704]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[693]: run_program: Waiting 3 seconds for output of '/lib/udev/rename_device(700)'

>udevd-event[704]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[704]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[705]: udev_node_add: creating device node '/dev/input/event1', major = '13', minor = '65', mode = '0600', uid = '0', gid = '0'

>udevd-event[705]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[706]: udev_db_get_device: no db file to read /dev/.udev/db/class@input@input1@mouse0: No such file or directory

>udevd-event[706]: udev_node_add: creating device node '/dev/input/mouse0', major = '13', minor = '32', mode = '0600', uid = '0', gid = '0'

>udevd-event[708]: udev_rules_get_name: rule applied, 'event0' becomes 'input/event0'

>udevd-event[708]: udev_db_get_device: no db file to read /dev/.udev/db/class@input@input0@event0: No such file or directory

>udevd-event[709]: udev_rules_get_name: rule applied, 'mice' becomes 'input/mice'

>udevd[390]: udev_event_run: seq 467 forked, pid [711], 'add' 'misc', 0 seconds old

>udevd-event[693]: run_program: Waiting 4 seconds for output of '/lib/udev/rename_device(700)'

>udevd[390]: udev_event_run: seq 468 forked, pid [712], 'add' 'misc', 0 seconds old

>udevd-event[704]: udev_event_run: seq 417 finished

>udevd-event[705]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[705]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[705]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[705]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[706]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[706]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[706]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[708]: udev_node_add: creating device node '/dev/input/event0', major = '13', minor = '64', mode = '0600', uid = '0', gid = '0'

>udevd-event[693]: run_program: Waiting 5 seconds for output of '/lib/udev/rename_device(700)'

>udevd-event[708]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[709]: udev_db_get_device: no db file to read /dev/.udev/db/class@input@mice: No such file or directory

>udevd-event[709]: udev_node_add: creating device node '/dev/input/mice', major = '13', minor = '63', mode = '0600', uid = '0', gid = '0'

>udevd-event[711]: udev_rules_get_name: rule applied, 'device-mapper' becomes 'mapper/control'

>udevd-event[711]: udev_db_get_device: no db file to read /dev/.udev/db/class@misc@device-mapper: No such file or directory

>udevd-event[712]: udev_rules_get_name: no node name set, will use kernel name 'network_throughput'

>udevd[390]: udev_done: seq 417, pid [704] exit with 0, 111 seconds old

>udevd[390]: udev_event_run: seq 436 forked, pid [716], 'add' 'pci', 110 seconds old

>udevd-event[705]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[705]: run_program: '/sbin/pam_console_apply /dev/input/event1 '

>udevd-event[693]: run_program: Waiting 6 seconds for output of '/lib/udev/rename_device(700)'

>udevd-event[705]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[706]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[706]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[706]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[708]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[708]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[708]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[708]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[709]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[709]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[709]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[711]: udev_node_add: creating device node '/dev/mapper/control', major = '10', minor = '60', mode = '0600', uid = '0', gid = '0'

>udevd-event[711]: udev_node_mknod: preserve file '/dev/mapper/control', because it has correct dev_t

>udevd-event[712]: udev_db_get_device: no db file to read /dev/.udev/db/class@misc@network_throughput: No such file or directory

>udevd-event[712]: udev_node_add: creating device node '/dev/network_throughput', major = '10', minor = '61', mode = '0600', uid = '0', gid = '0'

>udevd-event[716]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:01.3/bus' appeared after 0 loops

>udevd-event[693]: run_program: '/lib/udev/rename_device' returned with status 1

>udevd-event[693]: udev_rules_get_name: no node name set, will use kernel name 'lo'

>udevd-event[693]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[693]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[693]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[693]: run_program: '/lib/udev/udev_run_devd'

>udevd[390]: udev_event_run: seq 469 forked, pid [723], 'add' 'misc', 4 seconds old

>udevd[390]: udev_event_run: seq 470 forked, pid [724], 'add' 'misc', 0 seconds old

>udevd-event[705]: udev_event_run: seq 458 finished

>udevd-event[706]: run_program: '/sbin/pam_console_apply /dev/input/mouse0 '

>udevd-event[706]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[706]: udev_event_run: seq 459 finished

>udevd-event[708]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[708]: run_program: '/sbin/pam_console_apply /dev/input/event0 '

>udevd-event[708]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[709]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[709]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[709]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[711]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[711]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[711]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[712]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[712]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[712]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[716]: run_program: 'modprobe  pci:v00008086d00007020sv00008086sd00000000bc0Csc03i00'

>udevd-event[723]: udev_rules_get_name: no node name set, will use kernel name 'network_latency'

>udevd-event[723]: udev_db_get_device: no db file to read /dev/.udev/db/class@misc@network_latency: No such file or directory

>udevd-event[724]: udev_rules_get_name: no node name set, will use kernel name 'cpu_dma_latency'

>udevd-event[693]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[693]: run_program: '/etc/sysconfig/network-scripts/net.hotplug'

>udevd[390]: udev_done: seq 458, pid [705] exit with 0, 25 seconds old

>udevd[390]: udev_done: seq 459, pid [706] exit with 0, 18 seconds old

>udevd[390]: udev_event_run: seq 460 forked, pid [734], 'add' 'input', 16 seconds old

>udevd-event[708]: udev_event_run: seq 461 finished

>udevd-event[709]: run_program: '/sbin/pam_console_apply /dev/input/mice '

>udevd-event[693]: run_program: '/etc/sysconfig/network-scripts/net.hotplug' returned with status 0

>udevd-event[716]: run_program: Waiting 1 seconds for output of 'modprobe  pci:v00008086d00007020sv00008086sd00000000bc0Csc03i00(730)'

>udevd-event[709]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[709]: udev_event_run: seq 463 finished

>udevd-event[711]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[711]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[711]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[712]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[712]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[712]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[723]: udev_node_add: creating device node '/dev/network_latency', major = '10', minor = '62', mode = '0600', uid = '0', gid = '0'

>udevd-event[723]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[724]: udev_db_get_device: no db file to read /dev/.udev/db/class@misc@cpu_dma_latency: No such file or directory

>udevd-event[724]: udev_node_add: creating device node '/dev/cpu_dma_latency', major = '10', minor = '63', mode = '0600', uid = '0', gid = '0'

>udevd-event[734]: run_program: 'modprobe  input:b0011v0002p0006e0000-e0,1,2,k110,111,112,113,114,r0,1,6,8,amlsfw'

>udevd-event[716]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[716]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[716]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[693]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[716]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[693]: udev_event_run: seq 454 finished

>udevd-event[716]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[716]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[716]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[716]: udev_event_run: seq 436 finished

>udevd[390]: udev_event_run: seq 471 forked, pid [742], 'add' 'misc', 6 seconds old

>udevd[390]: udev_done: seq 454, pid [693] exit with 0, 124 seconds old

>udevd-event[711]: run_program: '/sbin/pam_console_apply /dev/mapper/control '

>udevd-event[711]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[711]: udev_event_run: seq 467 finished

>udevd-event[712]: run_program: '/sbin/pam_console_apply /dev/network_throughput '

>udevd-event[712]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[712]: udev_event_run: seq 468 finished

>udevd-event[723]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[723]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[723]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[723]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[724]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[724]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[724]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[734]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module input:b0011v0002p0006e0000_e0,1,2,k110,111,112,113,114,r0,1,6,8,amlsfw not found.'

>udevd-event[742]: udev_rules_get_name: no node name set, will use kernel name 'nvram'

>udevd-event[742]: udev_db_get_device: no db file to read /dev/.udev/db/class@misc@nvram: No such file or directory

>udevd[390]: udev_done: seq 461, pid [708] exit with 0, 24 seconds old

>udevd[390]: udev_done: seq 463, pid [709] exit with 0, 24 seconds old

>udevd[390]: udev_done: seq 467, pid [711] exit with 0, 22 seconds old

>udevd[390]: udev_done: seq 436, pid [716] exit with 0, 127 seconds old

>udevd-event[723]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[723]: run_program: '/sbin/pam_console_apply /dev/network_latency '

>udevd-event[723]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[724]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[724]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[724]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[734]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[734]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[734]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[742]: udev_node_add: creating device node '/dev/nvram', major = '10', minor = '144', mode = '0660', uid = '0', gid = '0'

>udevd-event[742]: run_program: 'load_floppy_module.sh'

>udevd[390]: udev_done: seq 468, pid [712] exit with 0, 23 seconds old

>udevd[390]: udev_event_run: seq 445 forked, pid [753], 'add' 'usb_endpoint', 129 seconds old

>udevd-event[723]: udev_event_run: seq 469 finished

>udevd-event[724]: run_program: '/sbin/pam_console_apply /dev/cpu_dma_latency '

>udevd-event[724]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[724]: udev_event_run: seq 470 finished

>udevd-event[734]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[734]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[734]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[753]: udev_rules_get_name: no node name set, will use kernel name 'usbdev1.2_ep81'

>udevd[390]: udev_event_run: seq 446 forked, pid [760], 'add' 'usb_endpoint', 131 seconds old

>udevd-event[742]: run_program: Waiting 1 seconds for output of 'load_floppy_module.sh(752)'

>udevd[390]: udev_event_run: seq 448 forked, pid [761], 'add' 'hidraw', 131 seconds old

>udevd-event[734]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[734]: udev_event_run: seq 460 finished

>udevd-event[753]: udev_db_get_device: no db file to read /dev/.udev/db/devices@pci0000:00@0000:00:01.3@usb1@1-2@1-2:1.0@usbdev1.2_ep81: No such file or directory

>udevd-event[753]: udev_node_add: creating device node '/dev/usbdev1.2_ep81', major = '442', minor = '1', mode = '0600', uid = '0', gid = '0'

>udevd-event[760]: udev_rules_get_name: no node name set, will use kernel name 'usbdev1.2_ep00'

>udevd-event[760]: udev_db_get_device: no db file to read /dev/.udev/db/devices@pci0000:00@0000:00:01.3@usb1@1-2@usbdev1.2_ep00: No such file or directory

>udevd-event[761]: udev_rules_get_name: no node name set, will use kernel name 'hidraw0'

>udevd[390]: udev_event_run: seq 462 forked, pid [763], 'add' 'input', 30 seconds old

>udevd-event[742]: run_program: '/lib/udev/load_floppy_module.sh' returned with status 0

>udevd-event[742]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[742]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[742]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[742]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[742]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[742]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[742]: run_program: '/sbin/pam_console_apply /dev/nvram '

>udevd-event[742]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[742]: udev_event_run: seq 471 finished

>udevd[390]: udev_event_run: seq 472 forked, pid [767], 'add' 'misc', 11 seconds old

>udevd-event[753]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[753]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[753]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[760]: udev_node_add: creating device node '/dev/usbdev1.2_ep00', major = '442', minor = '1', mode = '0600', uid = '0', gid = '0'

>udevd-event[760]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[761]: udev_db_get_device: no db file to read /dev/.udev/db/devices@pci0000:00@0000:00:01.3@usb1@1-2@hidraw0: No such file or directory

>udevd-event[761]: udev_node_add: creating device node '/dev/hidraw0', major = '253', minor = '0', mode = '0600', uid = '0', gid = '0'

>udevd-event[763]: run_program: 'modprobe  input:b0011v0001p0001eAB83-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,96,9B,9C,9D,9E,9F,A3,A4,A5,A6,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw'

>udevd-event[767]: udev_rules_get_name: no node name set, will use kernel name 'hpet'

>udevd[390]: udev_done: seq 469, pid [723] exit with 0, 27 seconds old

>udevd[390]: udev_done: seq 470, pid [724] exit with 0, 22 seconds old

>udevd[390]: udev_done: seq 460, pid [734] exit with 1, 34 seconds old

>udevd[390]: udev_done: seq 471, pid [742] exit with 0, 19 seconds old

>udevd-event[753]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[753]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[753]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[760]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[760]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[760]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[760]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[761]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[761]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[761]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[763]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module input:b0011v0001p0001eAB83_e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,96,9B,9C,9D,9E,9F,A3,A4,A5,A6,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw not found.'

>udevd-event[767]: udev_db_get_device: no db file to read /dev/.udev/db/class@misc@hpet: No such file or directory

>udevd-event[767]: udev_node_add: creating device node '/dev/hpet', major = '10', minor = '228', mode = '0600', uid = '0', gid = '0'

>udevd[390]: udev_event_run: seq 473 forked, pid [775], 'add' 'misc', 3 seconds old

>udevd[390]: udev_event_run: seq 474 forked, pid [776], 'add' 'misc', 0 seconds old

>udevd-event[753]: run_program: '/sbin/pam_console_apply /dev/usbdev1.2_ep81 '

>udevd-event[753]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[753]: udev_event_run: seq 445 finished

>udevd-event[760]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[760]: run_program: '/sbin/pam_console_apply /dev/usbdev1.2_ep00 '

>udevd-event[760]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[761]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[761]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[761]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[763]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[763]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[763]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[767]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[767]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[767]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[775]: udev_rules_get_name: no node name set, will use kernel name 'rtc'

>udevd-event[775]: udev_db_get_device: no db file to read /dev/.udev/db/class@misc@rtc: No such file or directory

>udevd-event[776]: udev_rules_get_name: no node name set, will use kernel name 'snapshot'

>udevd[390]: udev_done: seq 445, pid [753] exit with 0, 144 seconds old

>udevd[390]: udev_event_run: seq 455 forked, pid [781], 'add' 'input', 144 seconds old

>udevd-event[760]: udev_event_run: seq 446 finished

>udevd-event[761]: run_program: '/sbin/pam_console_apply /dev/hidraw0 '

>udevd-event[761]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[761]: udev_event_run: seq 448 finished

>udevd-event[763]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[763]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[763]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[767]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[767]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[767]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[775]: udev_node_add: creating device node '/dev/rtc', major = '10', minor = '135', mode = '0644', uid = '0', gid = '0'

>udevd-event[775]: udev_node_mknod: preserve file '/dev/rtc', because it has correct dev_t

>udevd-event[776]: udev_db_get_device: no db file to read /dev/.udev/db/class@misc@snapshot: No such file or directory

>udevd-event[776]: udev_node_add: creating device node '/dev/snapshot', major = '10', minor = '231', mode = '0600', uid = '0', gid = '0'

>udevd-event[781]: udev_rules_get_name: rule applied, 'event2' becomes 'input/event2'

>udevd[390]: udev_event_run: seq 456 forked, pid [786], 'add' 'input', 147 seconds old

>udevd[390]: udev_event_run: seq 475 forked, pid [787], 'add' 'misc', 3 seconds old

>udevd-event[763]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[763]: udev_event_run: seq 462 finished

>udevd-event[767]: run_program: '/sbin/pam_console_apply /dev/hpet '

>udevd-event[767]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[767]: udev_event_run: seq 472 finished

>udevd-event[775]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[775]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[775]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[776]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[776]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[776]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[781]: udev_db_get_device: no db file to read /dev/.udev/db/class@input@input2@event2: No such file or directory

>udevd-event[781]: udev_node_add: creating device node '/dev/input/event2', major = '13', minor = '66', mode = '0600', uid = '0', gid = '0'

>udevd-event[786]: udev_rules_get_name: rule applied, 'mouse1' becomes 'input/mouse1'

>udevd-event[786]: udev_db_get_device: no db file to read /dev/.udev/db/class@input@input2@mouse1: No such file or directory

>udevd-event[787]: udev_rules_get_name: no node name set, will use kernel name 'mcelog'

>udevd[390]: udev_done: seq 446, pid [760] exit with 0, 150 seconds old

>udevd[390]: udev_done: seq 448, pid [761] exit with 0, 150 seconds old

>udevd[390]: udev_done: seq 462, pid [763] exit with 1, 47 seconds old

>udevd[390]: udev_done: seq 472, pid [767] exit with 0, 27 seconds old

>udevd-event[775]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[775]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[775]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[776]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[776]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[776]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[781]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[781]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[781]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[786]: udev_node_add: creating device node '/dev/input/mouse1', major = '13', minor = '33', mode = '0600', uid = '0', gid = '0'

>udevd-event[786]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[787]: udev_db_get_device: no db file to read /dev/.udev/db/class@misc@mcelog: No such file or directory

>udevd-event[787]: udev_node_add: creating device node '/dev/mcelog', major = '10', minor = '227', mode = '0600', uid = '0', gid = '0'

>udevd[390]: udev_event_run: seq 464 forked, pid [794], 'add' 'usb_device', 48 seconds old

>udevd[390]: udev_event_run: seq 465 forked, pid [795], 'add' 'usb_device', 48 seconds old

>udevd-event[775]: run_program: '/sbin/pam_console_apply /dev/rtc '

>udevd-event[775]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[775]: udev_event_run: seq 473 finished

>udevd-event[776]: run_program: '/sbin/pam_console_apply /dev/snapshot '

>udevd-event[776]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[776]: udev_event_run: seq 474 finished

>udevd-event[781]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[781]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[781]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[786]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[786]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[786]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[786]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[787]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[787]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[787]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[794]: run_program: '/bin/sh -c 'K=usbdev1.2; K=${K#usbdev}; printf bus/usb/%03i/%03i ${K%%.*} ${K#*.}''

>udevd-event[794]: run_program: '/bin/sh' (stdout) 'bus/usb/001/002'

>udevd-event[795]: run_program: '/bin/sh -c 'K=usbdev1.1; K=${K#usbdev}; printf bus/usb/%03i/%03i ${K%%.*} ${K#*.}''

>udevd[390]: udev_event_run: seq 466 forked, pid [803], 'add' 'usb_host', 51 seconds old

>udevd[390]: udev_event_run: seq 476 forked, pid [804], 'add' 'graphics', 7 seconds old

>udevd-event[781]: run_program: '/sbin/pam_console_apply /dev/input/event2 '

>udevd-event[781]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[781]: udev_event_run: seq 455 finished

>udevd-event[786]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[786]: run_program: '/sbin/pam_console_apply /dev/input/mouse1 '

>udevd-event[786]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[787]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[787]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[787]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[794]: run_program: '/bin/sh' returned with status 0

>udevd-event[794]: udev_rules_get_name: rule applied, 'usbdev1.2' becomes 'bus/usb/001/002'

>udevd-event[794]: udev_db_get_device: no db file to read /dev/.udev/db/class@usb_device@usbdev1.2: No such file or directory

>udevd-event[795]: run_program: '/bin/sh' (stdout) 'bus/usb/001/001'

>udevd-event[795]: run_program: '/bin/sh' returned with status 0

>udevd-event[795]: udev_rules_get_name: rule applied, 'usbdev1.1' becomes 'bus/usb/001/001'

>udevd-event[803]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[803]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[804]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd[390]: udev_done: seq 473, pid [775] exit with 0, 23 seconds old

>udevd[390]: udev_done: seq 474, pid [776] exit with 0, 20 seconds old

>udevd[390]: udev_done: seq 455, pid [781] exit with 0, 160 seconds old

>udevd[390]: udev_event_run: seq 477 forked, pid [809], 'add' 'vtconsole', 0 seconds old

>udevd-event[786]: udev_event_run: seq 456 finished

>udevd-event[787]: run_program: '/sbin/pam_console_apply /dev/mcelog '

>udevd-event[787]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[787]: udev_event_run: seq 475 finished

>udevd-event[794]: udev_node_add: creating device node '/dev/bus/usb/001/002', major = '189', minor = '1', mode = '0644', uid = '0', gid = '0'

>udevd-event[794]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[795]: udev_db_get_device: no db file to read /dev/.udev/db/class@usb_device@usbdev1.1: No such file or directory

>udevd-event[795]: udev_node_add: creating device node '/dev/bus/usb/001/001', major = '189', minor = '0', mode = '0644', uid = '0', gid = '0'

>udevd-event[803]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[803]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[803]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[804]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[804]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[804]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[804]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[809]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd[390]: udev_done: seq 456, pid [786] exit with 0, 163 seconds old

>udevd[390]: udev_done: seq 475, pid [787] exit with 0, 19 seconds old

>udevd[390]: udev_event_run: seq 457 forked, pid [815], 'add' 'input', 131 seconds old

>udevd-event[794]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[794]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[794]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[794]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[795]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[795]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[795]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[803]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[803]: udev_event_run: seq 466 finished

>udevd-event[804]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[804]: udev_event_run: seq 476 finished

>udevd-event[809]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[809]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[809]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[809]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[815]: run_program: 'modprobe  input:b0003v0627p0001e0000-e0,1,2,3,k110,111,112,r8,a0,1,mlsfw'

>udevd[390]: udev_event_run: seq 478 forked, pid [821], 'add' 'pci_bus', 3 seconds old

>udevd[390]: udev_done: seq 466, pid [803] exit with 0, 61 seconds old

>udevd-event[794]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[794]: run_program: '/sbin/pam_console_apply /dev/bus/usb/001/002 '

>udevd-event[794]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[795]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[795]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[795]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[809]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[809]: udev_event_run: seq 477 finished

>udevd-event[821]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[821]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[815]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[815]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[815]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd[390]: udev_done: seq 476, pid [804] exit with 0, 19 seconds old

>udevd[390]: udev_done: seq 477, pid [809] exit with 0, 9 seconds old

>udevd[390]: udev_event_run: seq 479 forked, pid [827], 'add' 'block', 3 seconds old

>udevd-event[815]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[815]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[815]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[794]: udev_event_run: seq 464 finished

>udevd-event[795]: run_program: '/sbin/pam_console_apply /dev/bus/usb/001/001 '

>udevd-event[795]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[795]: udev_event_run: seq 465 finished

>udevd-event[821]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[821]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[821]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[827]: run_program: '/lib/udev/ata_id --export /dev/.tmp-3-0'

>udevd[390]: udev_done: seq 464, pid [794] exit with 0, 66 seconds old

>udevd[390]: udev_done: seq 465, pid [795] exit with 0, 66 seconds old

>udevd[390]: udev_event_run: seq 482 forked, pid [833], 'add' 'block', 0 seconds old

>udevd-event[815]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[815]: udev_event_run: seq 457 finished

>udevd-event[821]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[821]: udev_event_run: seq 478 finished

>udevd-event[833]: udev_rules_get_name: no node name set, will use kernel name 'ram15'

>udevd[390]: udev_done: seq 457, pid [815] exit with 0, 140 seconds old

>udevd[390]: udev_done: seq 478, pid [821] exit with 0, 9 seconds old

>udevd[390]: udev_event_run: seq 483 forked, pid [835], 'add' 'block', 0 seconds old

>udevd-event[833]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram15: No such file or directory

>udevd-event[833]: udev_node_add: creating device node '/dev/ram15', major = '1', minor = '15', mode = '0640', uid = '0', gid = '6'

>udevd-event[835]: udev_rules_get_name: no node name set, will use kernel name 'ram14'

>udevd[390]: udev_event_run: seq 484 forked, pid [836], 'add' 'block', 0 seconds old

>udevd[390]: udev_event_run: seq 485 forked, pid [837], 'add' 'block', 0 seconds old

>udevd-event[833]: udev_node_mknod: preserve file '/dev/ram15', because it has correct dev_t

>udevd-event[827]: run_program: Waiting 1 seconds for output of '/lib/udev/ata_id --export /dev/.tmp-3-0(834)'

>udevd-event[833]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[833]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[835]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram14: No such file or directory

>udevd-event[835]: udev_node_add: creating device node '/dev/ram14', major = '1', minor = '14', mode = '0640', uid = '0', gid = '6'

>udevd-event[836]: udev_rules_get_name: no node name set, will use kernel name 'ram13'

>udevd-event[836]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram13: No such file or directory

>udevd-event[837]: udev_rules_get_name: no node name set, will use kernel name 'ram12'

>udevd[390]: udev_event_run: seq 486 forked, pid [838], 'add' 'block', 0 seconds old

>udevd[390]: udev_event_run: seq 487 forked, pid [839], 'add' 'block', 0 seconds old

>udevd-event[833]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[833]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[833]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[835]: udev_node_mknod: preserve file '/dev/ram14', because it has correct dev_t

>udevd-event[835]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[835]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[836]: udev_node_add: creating device node '/dev/ram13', major = '1', minor = '13', mode = '0640', uid = '0', gid = '6'

>udevd-event[836]: udev_node_mknod: preserve file '/dev/ram13', because it has correct dev_t

>udevd-event[827]: run_program: Waiting 2 seconds for output of '/lib/udev/ata_id --export /dev/.tmp-3-0(834)'

>udevd-event[837]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram12: No such file or directory

>udevd-event[837]: udev_node_add: creating device node '/dev/ram12', major = '1', minor = '12', mode = '0640', uid = '0', gid = '6'

>udevd-event[838]: udev_rules_get_name: no node name set, will use kernel name 'ram11'

>udevd-event[838]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram11: No such file or directory

>udevd-event[839]: udev_rules_get_name: no node name set, will use kernel name 'ram10'

>udevd[390]: udev_event_run: seq 488 forked, pid [842], 'add' 'block', 0 seconds old

>udevd[390]: udev_event_run: seq 489 forked, pid [843], 'add' 'block', 0 seconds old

>udevd-event[833]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[833]: run_program: '/sbin/pam_console_apply /dev/ram15 '

>udevd-event[833]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[827]: run_program: Waiting 3 seconds for output of '/lib/udev/ata_id --export /dev/.tmp-3-0(834)'

>udevd-event[835]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[835]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[835]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[836]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[836]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[836]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[837]: udev_node_mknod: preserve file '/dev/ram12', because it has correct dev_t

>udevd-event[837]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[837]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[838]: udev_node_add: creating device node '/dev/ram11', major = '1', minor = '11', mode = '0640', uid = '0', gid = '6'

>udevd-event[838]: udev_node_mknod: preserve file '/dev/ram11', because it has correct dev_t

>udevd-event[839]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram10: No such file or directory

>udevd-event[839]: udev_node_add: creating device node '/dev/ram10', major = '1', minor = '10', mode = '0640', uid = '0', gid = '6'

>udevd-event[842]: udev_rules_get_name: no node name set, will use kernel name 'ram9'

>udevd-event[842]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram9: No such file or directory

>udevd-event[843]: udev_rules_get_name: no node name set, will use kernel name 'ram8'

>udevd-event[827]: run_program: '/lib/udev/ata_id' (stdout) 'ID_TYPE=disk'

>udevd-event[827]: run_program: '/lib/udev/ata_id' (stdout) 'ID_MODEL=QEMU_HARDDISK'

>udevd-event[827]: run_program: '/lib/udev/ata_id' (stdout) 'ID_SERIAL=QM00001'

>udevd-event[827]: run_program: '/lib/udev/ata_id' (stdout) 'ID_REVISION=0.8.2'

>udevd-event[827]: run_program: '/lib/udev/ata_id' (stdout) 'ID_BUS=ata'

>udevd-event[827]: run_program: '/lib/udev/ata_id' returned with status 0

>udevd-event[827]: udev_rules_get_name: add symlink 'disk/by-id/ata-QEMU_HARDDISK_QM00001'

>udevd-event[827]: run_program: '/lib/udev/path_id /block/hda'

>udevd[390]: udev_event_run: seq 490 forked, pid [849], 'add' 'block', 0 seconds old

>udevd-event[827]: run_program: '/lib/udev/path_id' (stdout) 'ID_PATH=pci-0000:00:01.1-ide-0:0'

>udevd[390]: udev_event_run: seq 491 forked, pid [853], 'add' 'block', 0 seconds old

>udevd-event[827]: run_program: '/lib/udev/path_id' returned with status 0

>udevd-event[827]: udev_rules_get_name: add symlink 'disk/by-path/pci-0000:00:01.1-ide-0:0'

>udevd-event[827]: run_program: '/lib/udev/vol_id --export /dev/.tmp-3-0'

>udevd-event[833]: udev_event_run: seq 482 finished

>udevd-event[835]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[835]: run_program: '/sbin/pam_console_apply /dev/ram14 '

>udevd-event[835]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[836]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[836]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[836]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[837]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[837]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[837]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[838]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[838]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[838]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[839]: udev_node_mknod: preserve file '/dev/ram10', because it has correct dev_t

>udevd-event[839]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[839]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[842]: udev_node_add: creating device node '/dev/ram9', major = '1', minor = '9', mode = '0640', uid = '0', gid = '6'

>udevd-event[842]: udev_node_mknod: preserve file '/dev/ram9', because it has correct dev_t

>udevd-event[843]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram8: No such file or directory

>udevd-event[843]: udev_node_add: creating device node '/dev/ram8', major = '1', minor = '8', mode = '0640', uid = '0', gid = '6'

>udevd-event[849]: udev_rules_get_name: no node name set, will use kernel name 'ram7'

>udevd-event[849]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram7: No such file or directory

>udevd-event[853]: udev_rules_get_name: no node name set, will use kernel name 'ram6'

>udevd[390]: udev_done: seq 482, pid [833] exit with 0, 19 seconds old

>udevd[390]: udev_event_run: seq 492 forked, pid [860], 'add' 'block', 0 seconds old

>udevd-event[835]: udev_event_run: seq 483 finished

>udevd-event[836]: run_program: '/sbin/pam_console_apply /dev/ram13 '

>udevd-event[836]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[836]: udev_event_run: seq 484 finished

>udevd-event[837]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[837]: run_program: '/sbin/pam_console_apply /dev/ram12 '

>udevd-event[837]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[838]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[827]: run_program: Waiting 1 seconds for output of '/lib/udev/vol_id --export /dev/.tmp-3-0(859)'

>udevd-event[838]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[838]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[839]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[839]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[839]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[842]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[842]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[842]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[843]: udev_node_mknod: preserve file '/dev/ram8', because it has correct dev_t

>udevd-event[843]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[843]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[849]: udev_node_add: creating device node '/dev/ram7', major = '1', minor = '7', mode = '0640', uid = '0', gid = '6'

>udevd-event[849]: udev_node_mknod: preserve file '/dev/ram7', because it has correct dev_t

>udevd-event[853]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram6: No such file or directory

>udevd-event[853]: udev_node_add: creating device node '/dev/ram6', major = '1', minor = '6', mode = '0640', uid = '0', gid = '6'

>udevd-event[860]: udev_rules_get_name: no node name set, will use kernel name 'ram5'

>udevd-event[827]: run_program: '/lib/udev/vol_id' returned with status 4

>udevd-event[827]: run_program: '/lib/udev/edd_id --export /dev/.tmp-3-0'

>udevd[390]: udev_done: seq 483, pid [835] exit with 0, 23 seconds old

>udevd[390]: udev_done: seq 484, pid [836] exit with 0, 22 seconds old

>udevd[390]: udev_event_run: seq 493 forked, pid [868], 'add' 'block', 0 seconds old

>udevd-event[837]: udev_event_run: seq 485 finished

>udevd-event[838]: run_program: '/sbin/pam_console_apply /dev/ram11 '

>udevd-event[838]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[838]: udev_event_run: seq 486 finished

>udevd-event[839]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[839]: run_program: '/sbin/pam_console_apply /dev/ram10 '

>udevd-event[827]: run_program: '/lib/udev/edd_id' (stderr) 'no kernel EDD support'

>udevd-event[839]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[842]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[842]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[842]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[843]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[843]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[843]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[849]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[849]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[849]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[853]: udev_node_mknod: preserve file '/dev/ram6', because it has correct dev_t

>udevd-event[853]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[853]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[860]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram5: No such file or directory

>udevd-event[860]: udev_node_add: creating device node '/dev/ram5', major = '1', minor = '5', mode = '0640', uid = '0', gid = '6'

>udevd-event[868]: udev_rules_get_name: no node name set, will use kernel name 'ram4'

>udevd-event[827]: run_program: '/lib/udev/edd_id' returned with status 2

>udevd-event[827]: udev_rules_get_name: no node name set, will use kernel name 'hda'

>udevd-event[827]: udev_db_get_device: no db file to read /dev/.udev/db/block@hda: No such file or directory

>udevd-event[827]: udev_node_add: creating device node '/dev/hda', major = '3', minor = '0', mode = '0640', uid = '0', gid = '6'

>udevd-event[827]: udev_node_mknod: preserve file '/dev/hda', because it has correct dev_t

>udevd-event[827]: udev_node_add: creating symlink '/dev/disk/by-id/ata-QEMU_HARDDISK_QM00001' to '../../hda'

>udevd-event[827]: udev_node_symlink: creating symlink '/dev/disk/by-id/ata-QEMU_HARDDISK_QM00001' to '../../hda'

>udevd-event[827]: udev_node_add: creating symlink '/dev/disk/by-path/pci-0000:00:01.1-ide-0:0' to '../../hda'

>udevd-event[827]: udev_node_symlink: creating symlink '/dev/disk/by-path/pci-0000:00:01.1-ide-0:0' to '../../hda'

>udevd-event[827]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[827]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[827]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[827]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[827]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd[390]: udev_done: seq 485, pid [837] exit with 0, 28 seconds old

>udevd[390]: udev_done: seq 486, pid [838] exit with 0, 26 seconds old

>udevd[390]: udev_event_run: seq 494 forked, pid [877], 'add' 'block', 1 seconds old

>udevd-event[839]: udev_event_run: seq 487 finished

>udevd-event[842]: run_program: '/sbin/pam_console_apply /dev/ram9 '

>udevd-event[842]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[842]: udev_event_run: seq 488 finished

>udevd-event[843]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[843]: run_program: '/sbin/pam_console_apply /dev/ram8 '

>udevd-event[843]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[849]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[849]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[849]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[853]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[853]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[853]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[860]: udev_node_mknod: preserve file '/dev/ram5', because it has correct dev_t

>udevd-event[860]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[860]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[868]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram4: No such file or directory

>udevd-event[868]: udev_node_add: creating device node '/dev/ram4', major = '1', minor = '4', mode = '0640', uid = '0', gid = '6'

>udevd-event[877]: udev_rules_get_name: no node name set, will use kernel name 'ram3'

>udevd-event[827]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[827]: run_program: '/sbin/pam_console_apply /dev/hda /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001 /dev/disk/by-path/pci-0000:00:01.1-ide-0:0'

>udevd[390]: udev_done: seq 487, pid [839] exit with 0, 30 seconds old

>udevd[390]: udev_done: seq 488, pid [842] exit with 0, 27 seconds old

>udevd[390]: udev_event_run: seq 495 forked, pid [883], 'add' 'block', 0 seconds old

>udevd-event[843]: udev_event_run: seq 489 finished

>udevd-event[849]: run_program: '/sbin/pam_console_apply /dev/ram7 '

>udevd-event[849]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[849]: udev_event_run: seq 490 finished

>udevd-event[853]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[853]: run_program: '/sbin/pam_console_apply /dev/ram6 '

>udevd-event[853]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[860]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[860]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[860]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[868]: udev_node_mknod: preserve file '/dev/ram4', because it has correct dev_t

>udevd-event[868]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[868]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[877]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram3: No such file or directory

>udevd-event[877]: udev_node_add: creating device node '/dev/ram3', major = '1', minor = '3', mode = '0640', uid = '0', gid = '6'

>udevd-event[883]: udev_rules_get_name: no node name set, will use kernel name 'ram2'

>udevd-event[827]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[827]: udev_event_run: seq 479 finished

>udevd[390]: udev_done: seq 479, pid [827] exit with 0, 43 seconds old

>udevd[390]: udev_done: seq 489, pid [843] exit with 0, 31 seconds old

>udevd[390]: udev_done: seq 490, pid [849] exit with 0, 26 seconds old

>udevd[390]: udev_event_run: seq 480 forked, pid [889], 'add' 'block', 39 seconds old

>udevd-event[853]: udev_event_run: seq 491 finished

>udevd-event[860]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[860]: run_program: '/sbin/pam_console_apply /dev/ram5 '

>udevd-event[860]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[868]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[868]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[868]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[877]: udev_node_mknod: preserve file '/dev/ram3', because it has correct dev_t

>udevd-event[877]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[877]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[883]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram2: No such file or directory

>udevd-event[883]: udev_node_add: creating device node '/dev/ram2', major = '1', minor = '2', mode = '0640', uid = '0', gid = '6'

>udevd-event[889]: udev_rules_get_name: add symlink 'disk/by-id/ata-QEMU_HARDDISK_QM00001-part2'

>udevd[390]: udev_event_run: seq 481 forked, pid [893], 'add' 'block', 41 seconds old

>udevd[390]: udev_event_run: seq 496 forked, pid [894], 'add' 'block', 4 seconds old

>udevd-event[860]: udev_event_run: seq 492 finished

>udevd-event[868]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[868]: run_program: '/sbin/pam_console_apply /dev/ram4 '

>udevd-event[868]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[877]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[877]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[877]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[883]: udev_node_mknod: preserve file '/dev/ram2', because it has correct dev_t

>udevd-event[883]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[883]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[889]: udev_rules_get_name: add symlink 'disk/by-path/pci-0000:00:01.1-ide-0:0-part2'

>udevd-event[889]: run_program: '/lib/udev/vol_id --export /dev/.tmp-3-2'

>udevd-event[893]: udev_rules_get_name: add symlink 'disk/by-id/ata-QEMU_HARDDISK_QM00001-part1'

>udevd-event[893]: udev_rules_get_name: add symlink 'disk/by-path/pci-0000:00:01.1-ide-0:0-part1'

>udevd-event[894]: udev_rules_get_name: add symlink 'ram'

>udevd[390]: udev_done: seq 491, pid [853] exit with 0, 30 seconds old

>udevd[390]: udev_done: seq 492, pid [860] exit with 0, 25 seconds old

>udevd[390]: udev_event_run: seq 497 forked, pid [899], 'add' 'block', 0 seconds old

>udevd-event[868]: udev_event_run: seq 493 finished

>udevd-event[877]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[877]: run_program: '/sbin/pam_console_apply /dev/ram3 '

>udevd-event[877]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[889]: run_program: Waiting 1 seconds for output of '/lib/udev/vol_id --export /dev/.tmp-3-2(898)'

>udevd-event[883]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[883]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[883]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[893]: run_program: '/lib/udev/vol_id --export /dev/.tmp-3-1'

>udevd-event[894]: udev_rules_get_name: no node name set, will use kernel name 'ram1'

>udevd-event[894]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram1: No such file or directory

>udevd-event[894]: udev_node_add: creating device node '/dev/ram1', major = '1', minor = '1', mode = '0640', uid = '0', gid = '6'

>udevd-event[899]: udev_rules_get_name: add symlink 'ramdisk'

>udevd[390]: udev_done: seq 493, pid [868] exit with 0, 23 seconds old

>udevd[390]: udev_event_run: seq 498 forked, pid [904], 'add' 'block', 0 seconds old

>udevd-event[877]: udev_event_run: seq 494 finished

>udevd-event[889]: run_program: '/lib/udev/vol_id' (stdout) 'ID_FS_USAGE=raid'

>udevd-event[889]: run_program: '/lib/udev/vol_id' (stdout) 'ID_FS_TYPE=LVM2_member'

>udevd-event[889]: run_program: '/lib/udev/vol_id' (stdout) 'ID_FS_VERSION=LVM2 001'

>udevd-event[893]: run_program: Waiting 1 seconds for output of '/lib/udev/vol_id --export /dev/.tmp-3-1(903)'

>udevd-event[883]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[883]: run_program: '/sbin/pam_console_apply /dev/ram2 '

>udevd-event[883]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[894]: udev_node_mknod: preserve file '/dev/ram1', because it has correct dev_t

>udevd-event[894]: udev_node_add: creating symlink '/dev/ram' to 'ram1'

>udevd-event[894]: udev_node_symlink: creating symlink '/dev/ram' to 'ram1'

>udevd-event[899]: udev_rules_get_name: no node name set, will use kernel name 'ram0'

>udevd-event[899]: udev_db_get_device: no db file to read /dev/.udev/db/block@ram0: No such file or directory

>udevd-event[899]: udev_node_add: creating device node '/dev/ram0', major = '1', minor = '0', mode = '0640', uid = '0', gid = '6'

>udevd-event[904]: run_program: '/sbin/mpath_wait 253 1'

>udevd-event[889]: run_program: '/lib/udev/vol_id' (stdout) 'ID_FS_UUID='

>udevd-event[889]: run_program: '/lib/udev/vol_id' (stdout) 'ID_FS_LABEL='

>udevd-event[889]: run_program: '/lib/udev/vol_id' (stdout) 'ID_FS_LABEL_SAFE='

>udevd-event[889]: run_program: '/lib/udev/vol_id' returned with status 0

>udevd-event[889]: udev_rules_get_name: no node name set, will use kernel name 'hda2'

>udevd-event[889]: udev_db_get_device: no db file to read /dev/.udev/db/block@hda@hda2: No such file or directory

>udevd-event[889]: udev_node_add: creating device node '/dev/hda2', major = '3', minor = '2', mode = '0640', uid = '0', gid = '6'

>udevd-event[889]: udev_node_mknod: preserve file '/dev/hda2', because it has correct dev_t

>udevd[390]: udev_done: seq 494, pid [877] exit with 0, 21 seconds old

>udevd[390]: udev_event_run: seq 499 forked, pid [907], 'add' 'block', 0 seconds old

>udevd-event[893]: run_program: Waiting 2 seconds for output of '/lib/udev/vol_id --export /dev/.tmp-3-1(903)'

>udevd-event[883]: udev_event_run: seq 495 finished

>udevd-event[894]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[894]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[894]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[893]: run_program: '/lib/udev/vol_id' (stdout) 'ID_FS_USAGE=filesystem'

>udevd-event[893]: run_program: '/lib/udev/vol_id' (stdout) 'ID_FS_TYPE=ext3'

>udevd-event[899]: udev_node_mknod: preserve file '/dev/ram0', because it has correct dev_t

>udevd-event[899]: udev_node_add: creating symlink '/dev/ramdisk' to 'ram0'

>udevd-event[899]: udev_node_symlink: creating symlink '/dev/ramdisk' to 'ram0'

>udevd-event[907]: run_program: '/sbin/mpath_wait 253 0'

>udevd-event[904]: run_program: Waiting 1 seconds for output of '/sbin/mpath_wait 253 1(906)'

>udevd-event[893]: run_program: '/lib/udev/vol_id' (stdout) 'ID_FS_VERSION=1.0'

>udevd-event[893]: run_program: '/lib/udev/vol_id' (stdout) 'ID_FS_UUID=e9c69da4-9587-4380-83c4-937bb439da97'

>udevd-event[893]: run_program: '/lib/udev/vol_id' (stdout) 'ID_FS_LABEL=/boot'

>udevd-event[893]: run_program: '/lib/udev/vol_id' (stdout) 'ID_FS_LABEL_SAFE=boot'

>udevd-event[893]: run_program: '/lib/udev/vol_id' returned with status 0

>udevd-event[893]: udev_rules_get_name: add symlink 'disk/by-uuid/e9c69da4-9587-4380-83c4-937bb439da97'

>udevd-event[893]: udev_rules_get_name: add symlink 'disk/by-label/boot'

>udevd-event[893]: udev_rules_get_name: no node name set, will use kernel name 'hda1'

>udevd-event[893]: udev_db_get_device: no db file to read /dev/.udev/db/block@hda@hda1: No such file or directory

>udevd-event[893]: udev_node_add: creating device node '/dev/hda1', major = '3', minor = '1', mode = '0640', uid = '0', gid = '6'

>udevd-event[904]: run_program: Waiting 2 seconds for output of '/sbin/mpath_wait 253 1(906)'

>udevd-event[893]: udev_node_mknod: preserve file '/dev/hda1', because it has correct dev_t

>udevd-event[893]: udev_node_add: creating symlink '/dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part1' to '../../hda1'

>udevd-event[893]: udev_node_symlink: creating symlink '/dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part1' to '../../hda1'

>udevd-event[889]: udev_node_add: creating symlink '/dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part2' to '../../hda2'

>udevd-event[889]: udev_node_symlink: creating symlink '/dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part2' to '../../hda2'

>udevd[390]: udev_done: seq 495, pid [883] exit with 0, 22 seconds old

>udevd[390]: udev_event_run: seq 500 forked, pid [914], 'add' 'module', 0 seconds old

>udevd-event[894]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[894]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[894]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[904]: run_program: Waiting 3 seconds for output of '/sbin/mpath_wait 253 1(906)'

>udevd-event[899]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[907]: run_program: '/sbin/mpath_wait' returned with status 0

>udevd-event[904]: run_program: '/sbin/mpath_wait' returned with status 0

>udevd-event[899]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[899]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[914]: udev_rules_get_run: rule applied, 'cdrom' is ignored

>udevd-event[914]: udev_device_event: device event will be ignored

>udevd-event[907]: run_program: '/sbin/dmsetup info -c --noheadings -j 253 -m 0'

>udevd-event[904]: run_program: '/sbin/dmsetup info -c --noheadings -j 253 -m 1'

>udevd-event[907]: run_program: '/sbin/dmsetup' (stdout) 'VolGroup00-LogVol00:253:0:L--w:1:1:0:LVM-zgFkuetFm9bY2hS9gi97DuIIac7kfLPPpFKCuPXRpJ4j3pwgDE6FGiEb86QD4ZWq'

>udevd-event[904]: run_program: '/sbin/dmsetup' (stdout) 'VolGroup00-LogVol01:253:1:L--w:0:1:0:LVM-zgFkuetFm9bY2hS9gi97DuIIac7kfLPP2xqA0XUsH1eoQ9hoSeeKSscbeyxgPQ1X'

>udevd-event[907]: run_program: '/sbin/dmsetup' returned with status 0

>udevd-event[904]: run_program: '/sbin/dmsetup' returned with status 0

>udevd-event[907]: udev_rules_get_name: rule applied, 'dm-0' is ignored

>udevd-event[904]: udev_rules_get_name: rule applied, 'dm-1' is ignored

>udevd-event[907]: udev_device_event: device event will be ignored

>udevd-event[904]: udev_device_event: device event will be ignored

>udevd-event[907]: udev_event_run: seq 499 finished

>udevd-event[904]: udev_event_run: seq 498 finished

>udevd-event[893]: udev_node_add: creating symlink '/dev/disk/by-path/pci-0000:00:01.1-ide-0:0-part1' to '../../hda1'

>udevd-event[893]: udev_node_symlink: creating symlink '/dev/disk/by-path/pci-0000:00:01.1-ide-0:0-part1' to '../../hda1'

>udevd-event[889]: udev_node_add: creating symlink '/dev/disk/by-path/pci-0000:00:01.1-ide-0:0-part2' to '../../hda2'

>udevd-event[889]: udev_node_symlink: creating symlink '/dev/disk/by-path/pci-0000:00:01.1-ide-0:0-part2' to '../../hda2'

>udevd[390]: udev_done: seq 498, pid [904] exit with 0, 15 seconds old

>udevd[390]: udev_done: seq 499, pid [907] exit with 0, 11 seconds old

>udevd[390]: udev_event_run: seq 501 forked, pid [919], 'add' 'module', 0 seconds old

>udevd-event[894]: run_program: '/sbin/pam_console_apply /dev/ram1 /dev/ram'

>udevd-event[894]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[894]: udev_event_run: seq 496 finished

>udevd-event[899]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[899]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[899]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[914]: udev_event_run: seq 500 finished

>udevd-event[919]: udev_rules_get_run: rule applied, 'serio_raw' is ignored

>udevd-event[893]: udev_node_add: creating symlink '/dev/disk/by-uuid/e9c69da4-9587-4380-83c4-937bb439da97' to '../../hda1'

>udevd-event[893]: udev_node_symlink: creating symlink '/dev/disk/by-uuid/e9c69da4-9587-4380-83c4-937bb439da97' to '../../hda1'

>udevd-event[889]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[889]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[889]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd[390]: udev_done: seq 496, pid [894] exit with 0, 26 seconds old

>udevd[390]: udev_done: seq 500, pid [914] exit with 0, 8 seconds old

>udevd[390]: udev_event_run: seq 502 forked, pid [923], 'add' 'drivers', 1 seconds old

>udevd-event[899]: run_program: '/sbin/pam_console_apply /dev/ram0 /dev/ramdisk'

>udevd-event[899]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[899]: udev_event_run: seq 497 finished

>udevd-event[919]: udev_device_event: device event will be ignored

>udevd-event[919]: udev_event_run: seq 501 finished

>udevd-event[923]: udev_rules_get_run: rule applied, 'serio_raw' is ignored

>udevd-event[893]: udev_node_add: creating symlink '/dev/disk/by-label/boot' to '../../hda1'

>udevd-event[893]: udev_node_symlink: creating symlink '/dev/disk/by-label/boot' to '../../hda1'

>udevd-event[893]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd[390]: udev_done: seq 497, pid [899] exit with 0, 22 seconds old

>udevd[390]: udev_done: seq 501, pid [919] exit with 0, 4 seconds old

>udevd[390]: udev_event_run: seq 503 forked, pid [925], 'add' 'module', 1 seconds old

>udevd-event[889]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[889]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[889]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[923]: udev_device_event: device event will be ignored

>udevd-event[923]: udev_event_run: seq 502 finished

>udevd-event[925]: udev_rules_get_run: rule applied, 'ide_cd' is ignored

>udevd[390]: udev_done: seq 502, pid [923] exit with 0, 4 seconds old

>udevd[390]: udev_event_run: seq 504 forked, pid [927], 'add' 'drivers', 0 seconds old

>udevd-event[893]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[893]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[893]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[893]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[889]: run_program: '/sbin/pam_console_apply /dev/hda2 /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part2 /dev/disk/by-path/pci-0000:00:01.1-ide-0:0-part2'

>udevd-event[889]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[925]: udev_device_event: device event will be ignored

>udevd-event[925]: udev_event_run: seq 503 finished

>udevd-event[927]: udev_rules_get_run: rule applied, 'ide-cdrom' is ignored

>udevd-event[927]: udev_device_event: device event will be ignored

>udevd[390]: udev_done: seq 503, pid [925] exit with 0, 4 seconds old

>udevd[390]: udev_event_run: seq 505 forked, pid [931], 'add' 'block', 0 seconds old

>udevd-event[893]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[893]: run_program: '/sbin/pam_console_apply /dev/hda1 /dev/disk/by-id/ata-QEMU_HARDDISK_QM00001-part1 /dev/disk/by-path/pci-0000:00:01.1-ide-0:0-part1 /dev/disk/by-uuid/e9c69da4-9587-4380-83c4-937bb439da97 /dev/disk/by-label/boot'

>udevd-event[889]: udev_event_run: seq 480 finished

>udevd-event[927]: udev_event_run: seq 504 finished

>udevd-event[931]: udev_rules_get_name: add symlink 'cdrom'

>udevd-event[931]: udev_rules_get_name: add symlink 'cdrom-hdc'

>udevd[390]: udev_done: seq 480, pid [889] exit with 0, 71 seconds old

>udevd[390]: udev_done: seq 504, pid [927] exit with 0, 4 seconds old

>udevd[390]: udev_event_run: seq 506 forked, pid [932], 'add' 'module', 1 seconds old

>udevd-event[893]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[893]: udev_event_run: seq 481 finished

>udevd-event[931]: run_program: 'check-cdrom.sh hdc DVD'

>udevd-event[932]: udev_rules_get_run: rule applied, 'tpm_bios' is ignored

>udevd[390]: udev_done: seq 481, pid [893] exit with 0, 73 seconds old

>udevd[390]: udev_event_run: seq 507 forked, pid [937], 'add' 'module', 0 seconds old

>udevd-event[931]: run_program: '/lib/udev/check-cdrom.sh' returned with status 1

>udevd-event[931]: run_program: 'check-cdrom.sh hdc CD-R'

>udevd-event[931]: run_program: '/lib/udev/check-cdrom.sh' returned with status 1

>udevd-event[932]: udev_device_event: device event will be ignored

>udevd-event[932]: udev_event_run: seq 506 finished

>udevd-event[937]: udev_rules_get_run: rule applied, 'tpm' is ignored

>udevd-event[937]: udev_device_event: device event will be ignored

>udevd[390]: udev_done: seq 506, pid [932] exit with 0, 3 seconds old

>udevd[390]: udev_event_run: seq 508 forked, pid [941], 'add' 'module', 0 seconds old

>udevd-event[931]: run_program: 'check-cdrom.sh hdc DVD-R'

>udevd-event[931]: run_program: '/lib/udev/check-cdrom.sh' returned with status 1

>udevd-event[931]: run_program: '/lib/udev/ata_id --export /dev/.tmp-22-0'

>udevd-event[931]: run_program: '/lib/udev/ata_id' (stdout) 'ID_TYPE=cd'

>udevd-event[937]: udev_event_run: seq 507 finished

>udevd-event[941]: udev_rules_get_run: rule applied, 'tpm_tis' is ignored

>udevd-event[941]: udev_device_event: device event will be ignored

>udevd[390]: udev_done: seq 507, pid [937] exit with 0, 2 seconds old

>udevd[390]: udev_event_run: seq 509 forked, pid [946], 'add' 'drivers', 0 seconds old

>udevd-event[931]: run_program: '/lib/udev/ata_id' (stdout) 'ID_MODEL=QEMU_CD-ROM'

>udevd-event[931]: run_program: '/lib/udev/ata_id' (stdout) 'ID_SERIAL=QM00003'

>udevd-event[931]: run_program: '/lib/udev/ata_id' (stdout) 'ID_REVISION=0.8.2'

>udevd-event[941]: udev_event_run: seq 508 finished

>udevd-event[946]: udev_rules_get_run: rule applied, 'tpm_tis' is ignored

>udevd-event[946]: udev_device_event: device event will be ignored

>udevd[390]: udev_done: seq 508, pid [941] exit with 0, 3 seconds old

>udevd[390]: udev_event_run: seq 510 forked, pid [947], 'add' 'module', 0 seconds old

>udevd-event[931]: run_program: '/lib/udev/ata_id' (stdout) 'ID_BUS=ata'

>udevd-event[931]: run_program: '/lib/udev/ata_id' returned with status 0

>udevd-event[931]: udev_rules_get_name: add symlink 'disk/by-id/ata-QEMU_CD-ROM_QM00003'

>udevd-event[946]: udev_event_run: seq 509 finished

>udevd-event[947]: udev_rules_get_run: rule applied, '8021q' is ignored

>udevd-event[947]: udev_device_event: device event will be ignored

>udevd[390]: udev_done: seq 509, pid [946] exit with 0, 3 seconds old

>udevd[390]: udev_event_run: seq 511 forked, pid [948], 'add' 'module', 0 seconds old

>udevd-event[931]: run_program: '/lib/udev/path_id /block/hdc'

>udevd-event[931]: run_program: '/lib/udev/path_id' (stdout) 'ID_PATH=pci-0000:00:01.1-ide-1:0'

>udevd-event[947]: udev_event_run: seq 510 finished

>udevd-event[948]: udev_rules_get_run: rule applied, 'xen_platform_pci' is ignored

>udevd[390]: udev_done: seq 510, pid [947] exit with 0, 2 seconds old

>udevd[390]: udev_event_run: seq 512 forked, pid [953], 'add' 'drivers', 0 seconds old

>udevd-event[931]: run_program: '/lib/udev/path_id' returned with status 0

>udevd-event[931]: udev_rules_get_name: add symlink 'disk/by-path/pci-0000:00:01.1-ide-1:0'

>udevd-event[931]: udev_rules_get_name: no node name set, will use kernel name 'hdc'

>udevd-event[948]: udev_device_event: device event will be ignored

>udevd-event[948]: udev_event_run: seq 511 finished

>udevd-event[953]: udev_rules_get_run: rule applied, 'xen-platform-pci' is ignored

>udevd[390]: udev_done: seq 511, pid [948] exit with 0, 2 seconds old

>udevd[390]: udev_event_run: seq 513 forked, pid [954], 'add' 'module', 0 seconds old

>udevd-event[931]: udev_db_get_device: no db file to read /dev/.udev/db/block@hdc: No such file or directory

>udevd-event[931]: udev_node_add: creating device node '/dev/hdc', major = '22', minor = '0', mode = '0640', uid = '0', gid = '6'

>udevd-event[953]: udev_device_event: device event will be ignored

>udevd-event[953]: udev_event_run: seq 512 finished

>udevd-event[954]: udev_rules_get_run: rule applied, 'ixgbevf' is ignored

>udevd-event[954]: udev_device_event: device event will be ignored

>udevd[390]: udev_done: seq 512, pid [953] exit with 0, 2 seconds old

>udevd[390]: udev_event_run: seq 514 forked, pid [955], 'add' 'drivers', 0 seconds old

>udevd-event[931]: udev_node_add: creating symlink '/dev/cdrom' to 'hdc'

>udevd-event[931]: udev_node_symlink: creating symlink '/dev/cdrom' to 'hdc'

>udevd-event[931]: udev_node_add: creating symlink '/dev/cdrom-hdc' to 'hdc'

>udevd-event[954]: udev_event_run: seq 513 finished

>udevd-event[955]: udev_rules_get_run: rule applied, 'ixgbevf' is ignored

>udevd-event[955]: udev_device_event: device event will be ignored

>udevd[390]: udev_done: seq 513, pid [954] exit with 0, 2 seconds old

>udevd[390]: udev_event_run: seq 515 forked, pid [956], 'add' 'xen', 1 seconds old

>udevd[390]: udev_event_run: seq 516 forked, pid [957], 'add' 'xen', 0 seconds old

>udevd-event[931]: udev_node_symlink: creating symlink '/dev/cdrom-hdc' to 'hdc'

>udevd-event[931]: udev_node_add: creating symlink '/dev/disk/by-id/ata-QEMU_CD-ROM_QM00003' to '../../hdc'

>udevd-event[931]: udev_node_symlink: creating symlink '/dev/disk/by-id/ata-QEMU_CD-ROM_QM00003' to '../../hdc'

>udevd-event[955]: udev_event_run: seq 514 finished

>udevd-event[956]: wait_for_sysfs: file '/sys/devices/xen/vbd-768/bus' appeared after 0 loops

>udevd-event[957]: wait_for_sysfs: file '/sys/devices/xen/vbd-5632/bus' appeared after 0 loops

>udevd[390]: udev_done: seq 514, pid [955] exit with 0, 3 seconds old

>udevd[390]: udev_event_run: seq 517 forked, pid [958], 'add' 'xen', 0 seconds old

>udevd-event[931]: udev_node_add: creating symlink '/dev/disk/by-path/pci-0000:00:01.1-ide-1:0' to '../../hdc'

>udevd-event[931]: udev_node_symlink: creating symlink '/dev/disk/by-path/pci-0000:00:01.1-ide-1:0' to '../../hdc'

>udevd-event[956]: run_program: 'modprobe  xen:vbd'

>udevd-event[957]: run_program: 'modprobe  xen:vbd'

>udevd-event[958]: wait_for_sysfs: file '/sys/devices/xen/pci-0/bus' appeared after 0 loops

>udevd-event[958]: run_program: 'modprobe  xen:pci'

>udevd[390]: udev_event_run: seq 518 forked, pid [963], 'add' 'xen', 0 seconds old

>udevd[390]: udev_event_run: seq 519 forked, pid [964], 'add' 'module', 0 seconds old

>udevd-event[931]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[931]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[931]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[957]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>Registering block device major 3
>register_blkdev: cannot get major 3 for ide
>xen_blk: can't get major 3 with name ide
>vbd vbd-768: 19 xlvbd_add at /local/domain/0/backend/vbd/9/768
>Registering block device major 22
>register_blkdev: cannot get major 22 for ide
>xen_blk: can't get major 22 with name ide
>vbd vbd-5632: 19 xlvbd_add at /local/domain/0/backend/vbd/9/5632
>udevd-event[956]: run_program: Waiting 1 seconds for 'modprobe  xen:vbd(959)'

>udevd-event[956]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[958]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module xen:pci not found.'

>udevd-event[958]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[958]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[963]: wait_for_sysfs: file '/sys/devices/xen/vif-0/bus' appeared after 0 loops

>udevd-event[963]: run_program: 'modprobe  xen:vif'

>udevd-event[964]: udev_rules_get_run: rule applied, 'e1000' is ignored

>udevd-event[957]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[956]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[957]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[956]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[957]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[956]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[957]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[956]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[956]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[956]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[957]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[956]: udev_event_run: seq 515 finished

>udevd-event[957]: udev_event_run: seq 516 finished

>udevd[390]: udev_done: seq 515, pid [956] exit with 0, 8 seconds old

>udevd[390]: udev_done: seq 516, pid [957] exit with 0, 7 seconds old

>udevd[390]: udev_event_run: seq 520 forked, pid [973], 'add' 'net', 1 seconds old

>udevd-event[931]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[931]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[931]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[958]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[958]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[958]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[958]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[964]: udev_device_event: device event will be ignored

>udevd-event[964]: udev_event_run: seq 519 finished

>udevd-event[973]: wait_for_sysfs: file '/sys/class/net/eth0/address' appeared after 0 loops

>udevd[390]: udev_done: seq 519, pid [964] exit with 0, 7 seconds old

>udevd[390]: udev_event_run: seq 521 forked, pid [979], 'add' 'drivers', 0 seconds old

>udevd-event[931]: run_program: '/sbin/pam_console_apply /dev/hdc /dev/cdrom /dev/cdrom-hdc /dev/disk/by-id/ata-QEMU_CD-ROM_QM00003 /dev/disk/by-path/pci-0000:00:01.1-ide-1:0'

>udevd-event[931]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[958]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[958]: udev_event_run: seq 517 finished

>udevd-event[973]: run_program: '/lib/udev/rename_device'

>udevd-event[963]: run_program: Waiting 1 seconds for output of 'modprobe  xen:vif(977)'

>udevd-event[979]: udev_rules_get_run: rule applied, 'e1000' is ignored

>udevd-event[979]: udev_device_event: device event will be ignored

>xen_mem: Initialising balloon driver.
>udevd[390]: udev_done: seq 517, pid [958] exit with 1, 10 seconds old

>udevd[390]: udev_event_run: seq 522 forked, pid [983], 'add' 'net', 0 seconds old

>udevd[390]: udev_event_run: seq 523 forked, pid [984], 'add' 'net', 0 seconds old

>udevd-event[931]: udev_event_run: seq 505 finished

>udevd-event[979]: udev_event_run: seq 521 finished

>udevd-event[983]: wait_for_sysfs: file '/sys/class/net/eth1/address' appeared after 0 loops

>netfront: Initialising virtual ethernet driver.
>udevd-event[984]: wait_for_sysfs: file '/sys/class/net/eth2/address' appeared after 0 loops

>udevd[390]: udev_done: seq 505, pid [931] exit with 0, 25 seconds old

>udevd-event[963]: run_program: Waiting 2 seconds for output of 'modprobe  xen:vif(977)'

>udevd-event[973]: run_program: Waiting 1 seconds for output of '/lib/udev/rename_device(981)'

>udevd[390]: udev_done: seq 521, pid [979] exit with 0, 4 seconds old

>udevd-event[963]: run_program: '/lib/udev/modprobe' returned with status 0

>udevd-event[963]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[963]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[963]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[963]: run_program: '/lib/udev/udev_run_devd'

>netfront: device eth3 has copying receive path.
>udevd-event[963]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[963]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[963]: udev_event_run: seq 518 finished

>udevd[390]: udev_done: seq 518, pid [963] exit with 0, 12 seconds old

>udevd[390]: udev_event_run: seq 524 forked, pid [988], 'add' 'module', 2 seconds old

>udevd-event[983]: run_program: '/lib/udev/rename_device'

>udevd-event[973]: run_program: Waiting 2 seconds for output of '/lib/udev/rename_device(981)'

>udevd-event[984]: run_program: '/lib/udev/rename_device'

>udevd-event[988]: udev_rules_get_run: rule applied, 'i2c_core' is ignored

>udevd[390]: udev_event_run: seq 525 forked, pid [991], 'add' 'drivers', 0 seconds old

>udevd[390]: udev_event_run: seq 526 forked, pid [992], 'add' 'module', 0 seconds old

>udevd-event[973]: run_program: '/lib/udev/rename_device' returned with status 0

>udevd-event[973]: udev_rules_get_name: no node name set, will use kernel name 'eth0'

>udevd-event[973]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[983]: run_program: '/lib/udev/rename_device' returned with status 0

>udevd-event[983]: udev_rules_get_name: no node name set, will use kernel name 'eth1'

>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>udevd-event[984]: run_program: '/lib/udev/rename_device' (stdout) 'INTERFACE=eth0'

>udevd-event[988]: udev_device_event: device event will be ignored

>udevd-event[988]: udev_event_run: seq 524 finished

>udevd-event[991]: udev_rules_get_run: rule applied, 'i2c_adapter' is ignored

>udevd-event[991]: udev_device_event: device event will be ignored

>udevd-event[992]: udev_rules_get_run: rule applied, 'i2c_piix4' is ignored

>udevd-event[983]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[983]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[983]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[983]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[983]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[983]: run_program: '/etc/sysconfig/network-scripts/net.hotplug'

>udevd-event[973]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[983]: run_program: '/etc/sysconfig/network-scripts/net.hotplug' returned with status 0

>udevd-event[973]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[983]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[973]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[973]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[984]: run_program: '/lib/udev/rename_device' (stdout) 'DEVPATH=/class/net/eth0'

>udevd-event[983]: udev_event_run: seq 522 finished

>udevd-event[984]: run_program: '/lib/udev/rename_device' returned with status 0

>udevd-event[984]: udev_rules_get_name: no node name set, will use kernel name 'eth2'

>udevd-event[984]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd[390]: udev_done: seq 522, pid [983] exit with 0, 9 seconds old

>udevd[390]: udev_done: seq 524, pid [988] exit with 0, 8 seconds old

>udevd[390]: udev_event_run: seq 527 forked, pid [1000], 'add' 'drivers', 0 seconds old

>udevd-event[991]: udev_event_run: seq 525 finished

>udevd-event[992]: udev_device_event: device event will be ignored

>udevd-event[992]: udev_event_run: seq 526 finished

>udevd-event[1000]: udev_rules_get_run: rule applied, 'piix4_smbus' is ignored

>udevd-event[973]: run_program: '/etc/sysconfig/network-scripts/net.hotplug'

>udevd-event[973]: run_program: '/etc/sysconfig/network-scripts/net.hotplug' returned with status 0

>udevd-event[973]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[984]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[984]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[984]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[984]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd[390]: udev_done: seq 525, pid [991] exit with 0, 7 seconds old

>udevd[390]: udev_done: seq 526, pid [992] exit with 0, 8 seconds old

>udevd[390]: udev_event_run: seq 528 forked, pid [1006], 'add' 'module', 1 seconds old

>udevd-event[1000]: udev_device_event: device event will be ignored

>udevd-event[1000]: udev_event_run: seq 527 finished

>udevd-event[1006]: udev_rules_get_run: rule applied, 'pcspkr' is ignored

>udevd-event[973]: udev_event_run: seq 520 finished

>udevd-event[984]: run_program: '/etc/sysconfig/network-scripts/net.hotplug'

>udevd-event[984]: run_program: '/etc/sysconfig/network-scripts/net.hotplug' returned with status 0

>udevd-event[984]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd[390]: udev_done: seq 520, pid [973] exit with 0, 17 seconds old

>udevd[390]: udev_done: seq 527, pid [1000] exit with 0, 4 seconds old

>udevd[390]: udev_event_run: seq 529 forked, pid [1010], 'add' 'drivers', 0 seconds old

>udevd-event[1006]: udev_device_event: device event will be ignored

>udevd-event[1006]: udev_event_run: seq 528 finished

>udevd-event[1010]: udev_rules_get_run: rule applied, 'pcspkr' is ignored

>udevd[390]: udev_done: seq 528, pid [1006] exit with 0, 3 seconds old

>udevd[390]: udev_event_run: seq 530 forked, pid [1011], 'add' 'input', 0 seconds old

>udevd-event[984]: udev_event_run: seq 523 finished

>udevd-event[1010]: udev_device_event: device event will be ignored

>udevd-event[1010]: udev_event_run: seq 529 finished

>udevd-event[1011]: run_program: 'modprobe  input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw'

>udevd[390]: udev_done: seq 523, pid [984] exit with 0, 15 seconds old

>udevd[390]: udev_done: seq 529, pid [1010] exit with 0, 2 seconds old

>udevd[390]: udev_event_run: seq 532 forked, pid [1012], 'add' 'module', 0 seconds old

>udevd-event[1011]: run_program: '/lib/udev/modprobe' (stderr) 'FATAL: Module input:b0010v001Fp0001e0100_e0,12,kramls1,2,fw not found.'

>udevd-event[1012]: udev_rules_get_run: rule applied, 'joydev' is ignored

>udevd[390]: udev_event_run: seq 533 forked, pid [1015], 'add' 'input', 0 seconds old

>udevd[390]: udev_event_run: seq 534 forked, pid [1016], 'add' 'module', 0 seconds old

>udevd-event[1011]: run_program: '/lib/udev/modprobe' returned with status 1

>udevd-event[1011]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[1011]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[1012]: udev_device_event: device event will be ignored

>udevd-event[1012]: udev_event_run: seq 532 finished

>udevd-event[1015]: udev_rules_get_name: add symlink 'js0'

>udevd-event[1015]: udev_rules_get_name: rule applied, 'js0' becomes 'input/js0'

>udevd-event[1016]: udev_rules_get_run: rule applied, 'xen_vbd' is ignored

>udevd[390]: udev_done: seq 532, pid [1012] exit with 0, 2 seconds old

>udevd[390]: udev_event_run: seq 535 forked, pid [1017], 'add' 'drivers', 0 seconds old

>udevd-event[1011]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[1011]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[1011]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[1015]: udev_db_get_device: no db file to read /dev/.udev/db/class@input@input2@js0: No such file or directory

>udevd-event[1015]: udev_node_add: creating device node '/dev/input/js0', major = '13', minor = '0', mode = '0644', uid = '0', gid = '0'

>udevd-event[1016]: udev_device_event: device event will be ignored

>udevd-event[1016]: udev_event_run: seq 534 finished

>udevd-event[1017]: udev_rules_get_run: rule applied, 'vbd' is ignored

>udevd-event[1017]: udev_device_event: device event will be ignored

>udevd[390]: udev_done: seq 534, pid [1016] exit with 0, 3 seconds old

>udevd[390]: udev_event_run: seq 536 forked, pid [1020], 'add' 'module', 0 seconds old

>udevd-event[1011]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[1011]: udev_event_run: seq 530 finished

>udevd-event[1015]: udev_node_add: creating symlink '/dev/js0' to 'input/js0'

>udevd-event[1015]: udev_node_symlink: creating symlink '/dev/js0' to 'input/js0'

>udevd-event[1015]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[1017]: udev_event_run: seq 535 finished

>udevd-event[1020]: udev_rules_get_run: rule applied, 'xen_balloon' is ignored

>udevd-event[1020]: udev_device_event: device event will be ignored

>udevd[390]: udev_done: seq 530, pid [1011] exit with 1, 7 seconds old

>udevd[390]: udev_done: seq 535, pid [1017] exit with 0, 4 seconds old

>udevd[390]: udev_event_run: seq 531 forked, pid [1021], 'add' 'input', 6 seconds old

>udevd-event[1015]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[1015]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[1015]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[1015]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[1020]: udev_event_run: seq 536 finished

>udevd-event[1021]: udev_rules_get_name: rule applied, 'event3' becomes 'input/event3'

>udevd[390]: udev_event_run: seq 537 forked, pid [1024], 'add' 'module', 1 seconds old

>udevd[390]: udev_done: seq 536, pid [1020] exit with 0, 3 seconds old

>udevd-event[1015]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[1015]: run_program: '/sbin/pam_console_apply /dev/input/js0 /dev/js0'

>udevd-event[1015]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[1021]: udev_db_get_device: no db file to read /dev/.udev/db/class@input@input3@event3: No such file or directory

>udevd-event[1021]: udev_node_add: creating device node '/dev/input/event3', major = '13', minor = '67', mode = '0600', uid = '0', gid = '0'

>udevd-event[1024]: udev_rules_get_run: rule applied, 'xen_vnif' is ignored

>udevd-event[1024]: udev_device_event: device event will be ignored

>udevd[390]: udev_event_run: seq 538 forked, pid [1026], 'add' 'drivers', 2 seconds old

>udevd[390]: udev_event_run: seq 539 forked, pid [1027], 'add' 'net', 0 seconds old

>udevd-event[1015]: udev_event_run: seq 533 finished

>udevd-event[1021]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[1021]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[1021]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[1024]: udev_event_run: seq 537 finished

>udevd-event[1026]: udev_rules_get_run: rule applied, 'vif' is ignored

>udevd-event[1026]: udev_device_event: device event will be ignored

>udevd-event[1027]: wait_for_sysfs: file '/sys/class/net/eth3/address' appeared after 0 loops

>udevd[390]: udev_done: seq 533, pid [1015] exit with 0, 9 seconds old

>udevd[390]: udev_done: seq 537, pid [1024] exit with 0, 5 seconds old

>udevd-event[1021]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[1021]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[1021]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[1026]: udev_event_run: seq 538 finished

>udevd[390]: udev_done: seq 538, pid [1026] exit with 0, 4 seconds old

>udevd-event[1027]: run_program: '/lib/udev/rename_device'

>udevd-event[1027]: run_program: '/lib/udev/rename_device' returned with status 1

>udevd-event[1027]: udev_rules_get_name: no node name set, will use kernel name 'eth3'

>udevd-event[1021]: run_program: '/sbin/pam_console_apply /dev/input/event3 '

>udevd-event[1021]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[1021]: udev_event_run: seq 531 finished

>udevd[390]: udev_done: seq 531, pid [1021] exit with 0, 13 seconds old

>udevd-event[1027]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[1027]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[1027]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[1027]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[1027]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[1027]: run_program: '/etc/sysconfig/network-scripts/net.hotplug'

>udevd-event[1027]: run_program: '/etc/sysconfig/network-scripts/net.hotplug' returned with status 0

>udevd-event[1027]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[1027]: udev_event_run: seq 539 finished

>udevd[390]: udev_done: seq 539, pid [1027] exit with 0, 5 seconds old

>udevsettle[404]: main: queue is empty

>udevsettle[404]: main: kernel seqnum = 539

>udevsettle[404]: main: udev seqnum = 539

>udevsettle[404]: main: queue is empty and no pending events left

>[  OK  ]

>udevd[390]: udev_event_run: seq 540 forked, pid [1040], 'add' 'module', 0 seconds old

>udevd-event[1040]: udev_rules_get_run: rule applied, 'floppy' is ignored

>udevd-event[1040]: udev_device_event: device event will be ignored

>udevd-event[1040]: udev_event_run: seq 540 finished

>udevd[390]: udev_done: seq 540, pid [1040] exit with 0, 0 seconds old

>FDC 0 is a S82078B
>udevd[390]: udev_event_run: seq 541 forked, pid [1043], 'add' 'module', 0 seconds old

>udevd-event[1043]: udev_rules_get_run: rule applied, 'parport' is ignored

>udevd-event[1043]: udev_device_event: device event will be ignored

>udevd-event[1043]: udev_event_run: seq 541 finished

>udevd[390]: udev_done: seq 541, pid [1043] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 542 forked, pid [1046], 'add' 'module', 0 seconds old

>udevd-event[1046]: udev_rules_get_run: rule applied, 'lp' is ignored

>udevd-event[1046]: udev_device_event: device event will be ignored

>udevd-event[1046]: udev_event_run: seq 542 finished

>udevd[390]: udev_done: seq 542, pid [1046] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 543 forked, pid [1050], 'add' 'module', 0 seconds old

>udevd[390]: udev_event_run: seq 544 forked, pid [1052], 'add' 'drivers', 0 seconds old

>udevd[390]: udev_event_run: seq 545 forked, pid [1053], 'add' 'drivers', 0 seconds old

>udevd-event[1050]: udev_rules_get_run: rule applied, 'parport_pc' is ignored

>udevd-event[1050]: udev_device_event: device event will be ignored

>udevd-event[1052]: udev_rules_get_run: rule applied, 'parport_pc' is ignored

>udevd-event[1050]: udev_event_run: seq 543 finished

>udevd[390]: udev_done: seq 543, pid [1050] exit with 0, 1 seconds old

>lp: driver loaded but no devices found
>udevd-event[1053]: udev_rules_get_run: rule applied, 'parport_pc' is ignored

>udevd-event[1053]: udev_device_event: device event will be ignored

>udevd-event[1052]: udev_device_event: device event will be ignored

>udevd-event[1052]: udev_event_run: seq 544 finished

>udevd[390]: udev_done: seq 544, pid [1052] exit with 0, 2 seconds old

>udevd-event[1053]: udev_event_run: seq 545 finished

>udevd[390]: udev_done: seq 545, pid [1053] exit with 0, 2 seconds old

>Loading default keymap (fi): [  OK  ]

>Setting hostname rhel58x64hvm01.localdomain:  [  OK  ]

>udevd[390]: udev_event_run: seq 546 forked, pid [1061], 'add' 'module', 0 seconds old

>udevd-event[1061]: udev_rules_get_run: rule applied, 'ac' is ignored

>udevd-event[1061]: udev_device_event: device event will be ignored

>udevd-event[1061]: udev_event_run: seq 546 finished

>udevd[390]: udev_done: seq 546, pid [1061] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 547 forked, pid [1064], 'add' 'module', 0 seconds old

>udevd-event[1064]: udev_rules_get_run: rule applied, 'acpi_memhotplug' is ignored

>udevd-event[1064]: udev_device_event: device event will be ignored

>udevd-event[1064]: udev_event_run: seq 547 finished

>udevd[390]: udev_done: seq 547, pid [1064] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 548 forked, pid [1067], 'add' 'module', 0 seconds old

>udevd-event[1067]: udev_rules_get_run: rule applied, 'asus_acpi' is ignored

>udevd-event[1067]: udev_device_event: device event will be ignored

>udevd-event[1067]: udev_event_run: seq 548 finished

>udevd[390]: udev_done: seq 548, pid [1067] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 549 forked, pid [1070], 'add' 'module', 0 seconds old

>udevd-event[1070]: udev_rules_get_run: rule applied, 'battery' is ignored

>udevd-event[1070]: udev_device_event: device event will be ignored

>udevd-event[1070]: udev_event_run: seq 549 finished

>udevd[390]: udev_done: seq 549, pid [1070] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 550 forked, pid [1073], 'add' 'module', 0 seconds old

>udevd-event[1073]: udev_rules_get_run: rule applied, 'button' is ignored

>udevd-event[1073]: udev_device_event: device event will be ignored

>udevd-event[1073]: udev_event_run: seq 550 finished

>udevd[390]: udev_done: seq 550, pid [1073] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 551 forked, pid [1076], 'add' 'module', 0 seconds old

>udevd-event[1076]: udev_rules_get_run: rule applied, 'wmi' is ignored

>udevd-event[1076]: udev_device_event: device event will be ignored

>udevd-event[1076]: udev_event_run: seq 551 finished

>udevd[390]: udev_done: seq 551, pid [1076] exit with 0, 0 seconds old

>ACPI: Mapper loaded
>udevd[390]: udev_event_run: seq 552 forked, pid [1078], 'add' 'module', 0 seconds old

>udevd-event[1078]: udev_rules_get_run: rule applied, 'dell_wmi' is ignored

>udevd-event[1078]: udev_device_event: device event will be ignored

>udevd-event[1078]: udev_event_run: seq 552 finished

>udevd[390]: udev_done: seq 552, pid [1078] exit with 0, 0 seconds old

>dell-wmi: No known WMI GUID found
>udevd[390]: udev_event_run: seq 553 forked, pid [1081], 'add' 'module', 0 seconds old

>udevd-event[1081]: udev_rules_get_run: rule applied, 'i2c_ec' is ignored

>udevd-event[1081]: udev_device_event: device event will be ignored

>udevd-event[1081]: udev_event_run: seq 553 finished

>udevd[390]: udev_done: seq 553, pid [1081] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 554 forked, pid [1084], 'add' 'module', 0 seconds old

>udevd-event[1084]: udev_rules_get_run: rule applied, 'hwmon' is ignored

>udevd-event[1084]: udev_device_event: device event will be ignored

>udevd-event[1084]: udev_event_run: seq 554 finished

>udevd[390]: udev_done: seq 554, pid [1084] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 555 forked, pid [1086], 'add' 'module', 0 seconds old

>udevd-event[1086]: udev_rules_get_run: rule applied, 'power_meter' is ignored

>udevd-event[1086]: udev_device_event: device event will be ignored

>udevd-event[1086]: udev_event_run: seq 555 finished

>udevd[390]: udev_done: seq 555, pid [1086] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 556 forked, pid [1089], 'add' 'module', 0 seconds old

>udevd-event[1089]: udev_rules_get_run: rule applied, 'sbs' is ignored

>udevd-event[1089]: udev_device_event: device event will be ignored

>udevd-event[1089]: udev_event_run: seq 556 finished

>udevd[390]: udev_done: seq 556, pid [1089] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 557 forked, pid [1092], 'add' 'module', 0 seconds old

>udevd-event[1092]: udev_rules_get_run: rule applied, 'backlight' is ignored

>udevd-event[1092]: udev_device_event: device event will be ignored

>udevd-event[1092]: udev_event_run: seq 557 finished

>udevd[390]: udev_done: seq 557, pid [1092] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 558 forked, pid [1094], 'add' 'module', 0 seconds old

>udevd-event[1094]: udev_rules_get_run: rule applied, 'thinkpad_acpi' is ignored

>udevd-event[1094]: udev_device_event: device event will be ignored

>udevd-event[1094]: udev_event_run: seq 558 finished

>udevd[390]: udev_done: seq 558, pid [1094] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 559 forked, pid [1097], 'remove' 'module', 0 seconds old

>udevd-event[1097]: udev_rules_get_run: rule applied, 'thinkpad_acpi' is ignored

>udevd-event[1097]: udev_device_event: device event will be ignored

>udevd-event[1097]: udev_event_run: seq 559 finished

>udevd[390]: udev_done: seq 559, pid [1097] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 560 forked, pid [1099], 'add' 'module', 0 seconds old

>udevd-event[1099]: udev_rules_get_run: rule applied, 'toshiba_acpi' is ignored

>udevd-event[1099]: udev_device_event: device event will be ignored

>udevd-event[1099]: udev_event_run: seq 560 finished

>udevd[390]: udev_done: seq 560, pid [1099] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 561 forked, pid [1102], 'remove' 'module', 0 seconds old

>udevd-event[1102]: udev_rules_get_run: rule applied, 'toshiba_acpi' is ignored

>udevd-event[1102]: udev_device_event: device event will be ignored

>udevd-event[1102]: udev_event_run: seq 561 finished

>udevd[390]: udev_done: seq 561, pid [1102] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 562 forked, pid [1104], 'add' 'module', 0 seconds old

>udevd-event[1104]: udev_rules_get_run: rule applied, 'video' is ignored

>udevd-event[1104]: udev_device_event: device event will be ignored

>udevd-event[1104]: udev_event_run: seq 562 finished

>udevd[390]: udev_done: seq 562, pid [1104] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 563 forked, pid [1109], 'add' 'block', 0 seconds old

>udevd-event[1109]: run_program: '/lib/udev/vol_id --export /dev/.tmp-9-0'

>udevd-event[1109]: run_program: '/lib/udev/vol_id' returned with status 4

>udevd-event[1109]: udev_rules_get_name: no node name set, will use kernel name 'md0'

>udevd-event[1109]: udev_db_get_device: no db file to read /dev/.udev/db/block@md0: No such file or directory

>udevd-event[1109]: udev_node_add: creating device node '/dev/md0', major = '9', minor = '0', mode = '0640', uid = '0', gid = '6'

>udevd-event[1109]: udev_node_mknod: preserve file '/dev/md0', because it has correct dev_t

>udevd-event[1109]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[1109]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[1109]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>udevd-event[1109]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[1109]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[1109]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[1109]: run_program: '/sbin/pam_console_apply /dev/md0 '

>udevd-event[1109]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[1109]: udev_event_run: seq 563 finished

>udevd[390]: udev_done: seq 563, pid [1109] exit with 0, 3 seconds old

>udevd[390]: udev_event_run: seq 564 forked, pid [1120], 'add' 'module', 0 seconds old

>udevd-event[1120]: udev_rules_get_run: rule applied, 'scsi_dh' is ignored

>udevd-event[1120]: udev_device_event: device event will be ignored

>udevd-event[1120]: udev_event_run: seq 564 finished

>udevd[390]: udev_done: seq 564, pid [1120] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 565 forked, pid [1122], 'add' 'module', 0 seconds old

>udevd-event[1122]: udev_rules_get_run: rule applied, 'dm_multipath' is ignored

>udevd-event[1122]: udev_device_event: device event will be ignored

>udevd-event[1122]: udev_event_run: seq 565 finished

>udevd[390]: udev_done: seq 565, pid [1122] exit with 0, 1 seconds old

>device-mapper: multipath: version 1.0.6 loaded
>Setting up Logical Volume Management:   2 logical volume(s) in volume group "VolGroup00" now active
>[  OK  ]

>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00 
>/dev/VolGroup00/LogVol00: clean, 126037/4597728 files, 1157902/4595712 blocks
>[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/hda1 
>/boot: clean, 47/128520 files, 51275/514048 blocks
>[  OK  ]

>Remounting root filesystem in read-write mode:  EXT3 FS on dm-0, internal journal
>[  OK  ]

>Mounting local filesystems:  kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>udevd[390]: udev_event_run: seq 566 forked, pid [1145], 'mount' 'block', 0 seconds old

>udevd-event[1145]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[1145]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[1145]: udev_event_run: seq 566 finished

>udevd[390]: udev_done: seq 566, pid [1145] exit with 0, 1 seconds old

>[  OK  ]

>Enabling local filesystem quotas:  [  OK  ]

>Enabling /etc/fstab swaps:  Adding 2064376k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2064376k
>[  OK  ]
>
INIT: Entering runlevel: 3

>Entering non-interactive startup
>Applying Intel CPU microcode update: udevd[390]: udev_event_run: seq 567 forked, pid [1217], 'add' 'module', 0 seconds old

>udevd-event[1217]: udev_rules_get_run: rule applied, 'microcode' is ignored

>udevd-event[1217]: udev_device_event: device event will be ignored

>udevd-event[1217]: udev_event_run: seq 567 finished

>udevd[390]: udev_done: seq 567, pid [1217] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 568 forked, pid [1219], 'add' 'misc', 0 seconds old

>udevd-event[1219]: udev_rules_get_name: rule applied, 'microcode' becomes 'cpu/microcode'

>udevd-event[1219]: udev_db_get_device: no db file to read /dev/.udev/db/class@misc@microcode: No such file or directory

>udevd-event[1219]: udev_node_add: creating device node '/dev/cpu/microcode', major = '10', minor = '184', mode = '0600', uid = '0', gid = '0'

>udevd-event[1219]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[1219]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[1219]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>udevd-event[1219]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[1219]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[1219]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[1219]: run_program: '/sbin/pam_console_apply /dev/cpu/microcode '

>udevd-event[1219]: run_program: '/sbin/pam_console_apply' returned with status 0

>udevd-event[1219]: udev_event_run: seq 568 finished

>udevd[390]: udev_done: seq 568, pid [1219] exit with 0, 2 seconds old

>[  OK  ]
udevd[390]: udev_event_run: seq 569 forked, pid [1227], 'remove' 'misc', 0 seconds old

>udevd-event[1227]: udev_node_remove: removing device node '/dev/cpu/microcode'

>udevd-event[1227]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[1227]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd[390]: udev_event_run: seq 570 forked, pid [1230], 'remove' 'module', 0 seconds old

>udevd-event[1230]: udev_rules_get_run: rule applied, 'microcode' is ignored

>udevd-event[1230]: udev_device_event: device event will be ignored

>udevd-event[1230]: udev_event_run: seq 570 finished

>udevd[390]: udev_done: seq 570, pid [1230] exit with 0, 1 seconds old

>
>udevd-event[1227]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[1227]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[1227]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[1227]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[1227]: udev_event_run: seq 569 finished

>udevd[390]: udev_done: seq 569, pid [1227] exit with 0, 2 seconds old

>Starting background readahead: [  OK  ]

>Checking for hardware changes [  OK  ]

>Applying ip6tables firewall rules: udevd[390]: udev_event_run: seq 571 forked, pid [1261], 'add' 'module', 0 seconds old

>udevd-event[1261]: udev_rules_get_run: rule applied, 'crypto_api' is ignored

>udevd-event[1261]: udev_device_event: device event will be ignored

>udevd-event[1261]: udev_event_run: seq 571 finished

>udevd[390]: udev_done: seq 571, pid [1261] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 572 forked, pid [1263], 'add' 'module', 0 seconds old

>udevd-event[1263]: udev_rules_get_run: rule applied, 'xfrm_nalgo' is ignored

>udevd-event[1263]: udev_device_event: device event will be ignored

>udevd-event[1263]: udev_event_run: seq 572 finished

>udevd[390]: udev_done: seq 572, pid [1263] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 573 forked, pid [1265], 'add' 'module', 0 seconds old

>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>udevd[390]: udev_event_run: seq 574 forked, pid [1267], 'add' 'net', 0 seconds old

>sit0: Disabled Privacy Extensions
>udevd-event[1265]: udev_rules_get_run: rule applied, 'ipv6' is ignored

>udevd-event[1267]: wait_for_sysfs: file '/sys/class/net/sit0/address' appeared after 0 loops

>udevd-event[1265]: udev_device_event: device event will be ignored

>udevd-event[1267]: run_program: '/lib/udev/rename_device'

>udevd-event[1265]: udev_event_run: seq 573 finished

>udevd-event[1267]: run_program: '/lib/udev/rename_device' returned with status 0

>udevd[390]: udev_done: seq 573, pid [1265] exit with 0, 1 seconds old

>udevd-event[1267]: udev_rules_get_name: no node name set, will use kernel name 'sit0'

>udevd-event[1267]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',

>udevd-event[1267]: run_program: '/lib/udev/udev_run_hotplugd'

>udevd-event[1267]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0

>udevd-event[1267]: run_program: '/lib/udev/udev_run_devd'

>udevd-event[1267]: run_program: '/lib/udev/udev_run_devd' returned with status 0

>udevd-event[1267]: run_program: '/etc/sysconfig/network-scripts/net.hotplug'

>udevd-event[1267]: run_program: '/etc/sysconfig/network-scripts/net.hotplug' returned with status 0

>udevd-event[1267]: pass_env_to_socket: passed -1 bytes to socket '/org/freedesktop/hal/udev_event',

>udevd-event[1267]: udev_event_run: seq 574 finished

>udevd[390]: udev_done: seq 574, pid [1267] exit with 0, 3 seconds old

>udevd[390]: udev_event_run: seq 575 forked, pid [1275], 'add' 'module', 0 seconds old

>udevd-event[1275]: udev_rules_get_run: rule applied, 'x_tables' is ignored

>udevd-event[1275]: udev_device_event: device event will be ignored

>udevd-event[1275]: udev_event_run: seq 575 finished

>udevd[390]: udev_done: seq 575, pid [1275] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 576 forked, pid [1277], 'add' 'module', 0 seconds old

>udevd-event[1277]: udev_rules_get_run: rule applied, 'ip6_tables' is ignored

>udevd-event[1277]: udev_device_event: device event will be ignored

>udevd-event[1277]: udev_event_run: seq 576 finished

>udevd[390]: udev_done: seq 576, pid [1277] exit with 0, 0 seconds old

>ip6_tables: (C) 2000-2006 Netfilter Core Team
>udevd[390]: udev_event_run: seq 577 forked, pid [1281], 'add' 'module', 0 seconds old

>udevd-event[1281]: udev_rules_get_run: rule applied, 'ip6table_filter' is ignored

>udevd-event[1281]: udev_device_event: device event will be ignored

>udevd-event[1281]: udev_event_run: seq 577 finished

>udevd[390]: udev_done: seq 577, pid [1281] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 578 forked, pid [1285], 'add' 'module', 0 seconds old

>udevd-event[1285]: udev_rules_get_run: rule applied, 'xt_tcpudp' is ignored

>udevd-event[1285]: udev_device_event: device event will be ignored

>udevd-event[1285]: udev_event_run: seq 578 finished

>udevd[390]: udev_done: seq 578, pid [1285] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 579 forked, pid [1289], 'add' 'module', 0 seconds old

>udevd-event[1289]: udev_rules_get_run: rule applied, 'ip6t_REJECT' is ignored

>udevd-event[1289]: udev_device_event: device event will be ignored

>udevd-event[1289]: udev_event_run: seq 579 finished

>udevd[390]: udev_done: seq 579, pid [1289] exit with 0, 0 seconds old

>[  OK  ]

>Applying iptables firewall rules: udevd[390]: udev_event_run: seq 580 forked, pid [1302], 'add' 'module', 0 seconds old

>udevd-event[1302]: udev_rules_get_run: rule applied, 'ip_tables' is ignored

>udevd-event[1302]: udev_device_event: device event will be ignored

>udevd-event[1302]: udev_event_run: seq 580 finished

>udevd[390]: udev_done: seq 580, pid [1302] exit with 0, 0 seconds old

>ip_tables: (C) 2000-2006 Netfilter Core Team
>udevd[390]: udev_event_run: seq 581 forked, pid [1306], 'add' 'module', 0 seconds old

>udevd-event[1306]: udev_rules_get_run: rule applied, 'iptable_filter' is ignored

>udevd-event[1306]: udev_device_event: device event will be ignored

>udevd-event[1306]: udev_event_run: seq 581 finished

>udevd[390]: udev_done: seq 581, pid [1306] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 582 forked, pid [1310], 'add' 'module', 0 seconds old

>Netfilter messages via NETLINK v0.30.
>udevd-event[1310]: udev_rules_get_run: rule applied, 'nfnetlink' is ignored

>udevd-event[1310]: udev_device_event: device event will be ignored

>udevd-event[1310]: udev_event_run: seq 582 finished

>udevd[390]: udev_event_run: seq 583 forked, pid [1312], 'add' 'module', 0 seconds old

>ip_conntrack version 2.4 (4095 buckets, 32760 max) - 304 bytes per conntrack
>udevd-event[1312]: udev_rules_get_run: rule applied, 'ip_conntrack' is ignored

>udevd[390]: udev_done: seq 582, pid [1310] exit with 0, 1 seconds old

>udevd-event[1312]: udev_device_event: device event will be ignored

>udevd-event[1312]: udev_event_run: seq 583 finished

>udevd[390]: udev_done: seq 583, pid [1312] exit with 0, 1 seconds old

>udevd[390]: udev_event_run: seq 584 forked, pid [1314], 'add' 'module', 0 seconds old

>udevd-event[1314]: udev_rules_get_run: rule applied, 'xt_state' is ignored

>udevd-event[1314]: udev_device_event: device event will be ignored

>udevd-event[1314]: udev_event_run: seq 584 finished

>udevd[390]: udev_done: seq 584, pid [1314] exit with 0, 0 seconds old

>udevd[390]: udev_event_run: seq 585 forked, pid [1318], 'add' 'module', 0 seconds old

>udevd-event[1318]: udev_rules_get_run: rule applied, 'ipt_REJECT' is ignored

>udevd-event[1318]: udev_device_event: device event will be ignored

>udevd-event[1318]: udev_event_run: seq 585 finished

>udevd[390]: udev_done: seq 585, pid [1318] exit with 0, 0 seconds old

>[  OK  ]

>Loading additional iptables modules: ip_conntrack_netbios_ns udevd[390]: udev_event_run: seq 586 forked, pid [1321], 'add' 'module', 0 seconds old

>udevd-event[1321]: udev_rules_get_run: rule applied, 'ip_conntrack_netbios_ns' is ignored

>udevd-event[1321]: udev_device_event: device event will be ignored

>udevd-event[1321]: udev_event_run: seq 586 finished

>udevd[390]: udev_done: seq 586, pid [1321] exit with 0, 1 seconds old

>[  OK  ]

>Bringing up loopback interface:  ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>[  OK  ]

>Bringing up interface eth0:  
>Determining IP information for eth0...ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>8021q: adding VLAN 0 to HW filter on device eth0
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
> done.
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>[  OK  ]

>Starting system logger: [  OK  ]

>Starting kernel logger: [  OK  ]

>Starting irqbalance: [  OK  ]

>Mounting other filesystems:  [  OK  ]

>Starting acpi daemon: [  OK  ]

>Starting monitoring for VG VolGroup00:   2 logical volume(s) in volume group "VolGroup00" monitored
>[  OK  ]

>Starting sshd: [  OK  ]

>Starting xinetd: [  OK  ]

>Starting console mouse services: [  OK  ]

>Starting crond: [  OK  ]

>Starting anacron: [  OK  ]

>Starting atd: [  OK  ]
[  OK  ]

>Starting rhsmcertd 240 1440[  OK  ]

>Starting yum-updatesd: [  OK  ]

>Starting smartd: [  OK  ]

>
>Red Hat Enterprise Linux Server release 5.8 (Tikanga)
>Kernel 2.6.18-308.20.1.el5.bz862862_ixgbevf_crash_3 on an x86_64
>
>rhel58x64hvm01.localdomain login: eth0: no IPv6 routers present
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:07.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_open() entry
>ixgbevf 0000:00:06.0: ixgbevf_setup_all_tx_resources() entry
>ixgbevf 0000:00:06.0: ixgbevf_setup_tx_resources() entry tx_ring=ffff810001910640
>ixgbevf 0000:00:06.0: ixgbevf_setup_tx_resources() exit (OK)
>ixgbevf 0000:00:06.0: ixgbevf_setup_all_tx_resources() exit (0)
>ixgbevf 0000:00:06.0: ixgbevf_setup_all_rx_resources() entry
>ixgbevf 0000:00:06.0: ixgbevf_setup_rx_resources() entry rx_ring=ffff81003f8500c0
>ixgbevf 0000:00:06.0: ixgbevf_setup_rx_resources() exit (OK)
>ixgbevf 0000:00:06.0: ixgbevf_setup_all_rx_resources() exit (0)
>ixgbevf 0000:00:06.0: ixgbevf_configure() entry
>ixgbevf 0000:00:06.0: ixgbevf_set_rx_mode() entry mc_count=1
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() entry
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() exit addr=ffff81003f88e988
>ixgbevf 0000:00:06.0: ixgbevf_set_rx_mode() exit
>ixgbevf 0000:00:06.0: ixgbevf_restore_vlan() entry
>ixgbevf 0000:00:06.0: ixgbevf_vlan_rx_register() entry
>ixgbevf 0000:00:06.0: ixgbevf_vlan_rx_register() exit
>ixgbevf 0000:00:06.0: ixgbevf_restore_vlan() exit
>ixgbevf 0000:00:06.0: ixgbevf_configure_tx() entry
>ixgbevf 0000:00:06.0: ixgbevf_configure_tx() exit
>ixgbevf 0000:00:06.0: ixgbevf_configure_rx() entry
>ixgbevf 0000:00:06.0: ixgbevf_configure_rx() mtu=1500 flags=0x00000003 rx_buf_len=1522 rdlen=8192
>ixgbevf 0000:00:06.0: ixgbevf_configure_srrctl() entry index=0
>ixgbevf 0000:00:06.0: ixgbevf_configure_srrctl() not IXGBE_FLAG_RX_PS_ENABLED
>ixgbevf 0000:00:06.0: ixgbevf_configure_srrctl() MAXIMUM_ETHERNET_VLAN_SIZE
>ixgbevf 0000:00:06.0: ixgbevf_configure_srrctl() exit
>ixgbevf 0000:00:06.0: ixgbevf_configure_rx() exit
>ixgbevf 0000:00:06.0: ixgbevf_configure() exit
>ixgbevf 0000:00:06.0: ixgbevf_map_rings_to_vectors() entry num_msix_vectors=3 q_vectors=2 num_rx_queues=1 num_tx_queues=1
>ixgbevf 0000:00:06.0: ixgbevf_map_rings_to_vectors() one queue per vector
>ixgbevf 0000:00:06.0: map_vector_to_rxq() entry v_idx=0 r_idx=0
>ixgbevf 0000:00:06.0: map_vector_to_rxq() exit rxr_count=1
>ixgbevf 0000:00:06.0: map_vector_to_txq() entry v_idx=1 t_idx=0
>ixgbevf 0000:00:06.0: map_vector_to_txq() exit txr_count=1
>ixgbevf 0000:00:06.0: ixgbevf_map_rings_to_vectors() exit (0)
>ixgbevf 0000:00:06.0: ixgbevf_up_complete() entry hw_mac_type=1
>ixgbevf 0000:00:06.0: ixgbevf_rx_desc_queue_enable() entry rxr=0
>ixgbevf 0000:00:06.0: ixgbevf_rx_desc_queue_enable() exit
>ixgbevf 0000:00:06.0: ixgbevf_configure_msix() entry num_msix_vectors=3 q_vectors=2
>ixgbevf 0000:00:06.0: ixgbevf_configure_msix() configuring RX queues for MSI-X v_idx=0 rxr_count=1
>ixgbevf 0000:00:06.0: ixgbevf_configure_msix() rx_ring_idx=0
>ixgbevf 0000:00:06.0: ixgbevf_set_ivar() entry direction=0 queue=0 msix_vector=0
>ixgbevf 0000:00:06.0: ixgbevf_set_ivar() exit
>ixgbevf 0000:00:06.0: ixgbevf_configure_msix() configuring TX queues for MSI-X v_idx=0 txr_count=0
>ixgbevf 0000:00:06.0: ixgbevf_configure_msix() configuring RX queues for MSI-X v_idx=1 rxr_count=0
>ixgbevf 0000:00:06.0: ixgbevf_configure_msix() configuring TX queues for MSI-X v_idx=1 txr_count=1
>ixgbevf 0000:00:06.0: ixgbevf_configure_msix() tx_ring_idx=0
>ixgbevf 0000:00:06.0: ixgbevf_set_ivar() entry direction=1 queue=0 msix_vector=1
>ixgbevf 0000:00:06.0: ixgbevf_set_ivar() exit
>ixgbevf 0000:00:06.0: ixgbevf_set_ivar() entry direction=-1 queue=1 msix_vector=2
>ixgbevf 0000:00:06.0: ixgbevf_set_ivar() exit
>ixgbevf 0000:00:06.0: ixgbevf_configure_msix() exit
>ixgbevf 0000:00:06.0: ixgbevf_up_complete() addr=02:9C:00:8D:36:F0
>ixgbevf 0000:00:06.0: ixgbevf_up_complete() set_rar=0
>ixgbevf 0000:00:06.0: ixgbevf_napi_enable_all() entry num_msix_vectors=3 q_vectors=2
>ixgbevf 0000:00:06.0: ixgbevf_napi_enable_all() q_idx=0 rxr_count=1
>ixgbevf 0000:00:06.0: ixgbevf_napi_enable_all() q_idx=1 rxr_count=0
>ixgbevf 0000:00:06.0: ixgbevf_napi_enable_all() exit
>ixgbevf 0000:00:06.0: ixgbevf_save_reset_stats() entry save=0
>ixgbevf 0000:00:06.0: ixgbevf_save_reset_stats() exit
>ixgbevf 0000:00:06.0: ixgbevf_init_last_counter_stats() entry
>ixgbevf 0000:00:06.0: ixgbevf_init_last_counter_stats() exit
>ixgbevf 0000:00:06.0: ixgbevf_up_complete() exit (OK)
>ixgbevf 0000:00:06.0: ixgbevf_request_irq() entry
>ixgbevf 0000:00:06.0: ixgbevf_request_msix_irqs() entry num_msix_vectors=3 q_vectors=2
>ixgbevf 0000:00:06.0: ixgbevf_request_msix_irqs() requesting irq=193 for vector=0 with name=__tmp73526586-rx-0
>ixgbevf 0000:00:06.0: ixgbevf_watchdog_task() NIC Link is Up, 10 Gbps
>ixgbevf 0000:00:06.0: ixgbevf_request_msix_irqs() requesting irq=201 for vector=1 with name=__tmp73526586-tx-0
>ixgbevf 0000:00:06.0: ixgbevf_request_msix_irqs() exit (OK)
>ixgbevf 0000:00:06.0: ixgbevf_request_irq() exit (0)
>ixgbevf 0000:00:06.0: ixgbevf_irq_enable() entry queues=1 flush=1
>ixgbevf 0000:00:06.0: ixgbevf_irq_enable() exit
>ixgbevf 0000:00:06.0: ixgbevf_open() exit (OK)
>ixgbevf 0000:00:06.0: ixgbevf_set_rx_mode() entry mc_count=1
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() entry
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() exit addr=ffff81003f88e988
>ixgbevf 0000:00:06.0: ixgbevf_set_rx_mode() exit
>ixgbevf 0000:00:06.0: ixgbevf_get_stats() entry / exit
>ixgbevf 0000:00:06.0: ixgbevf_set_rx_mode() entry mc_count=2
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() entry
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() exit addr=ffff81003393a2c8
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() entry
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() exit addr=ffff81003f88e988
>ixgbevf 0000:00:06.0: ixgbevf_set_rx_mode() exit
>8021q: adding VLAN 0 to HW filter on device __tmp73526586
>ixgbevf 0000:00:06.0: ixgbevf_vlan_rx_add_vid() entry vid=0
>ixgbevf 0000:00:06.0: ixgbevf_vlan_rx_add_vid() set_vfta=0
>ixgbevf 0000:00:06.0: ixgbevf_vlan_rx_add_vid() exit
>ixgbevf 0000:00:06.0: ixgbevf_set_rx_mode() entry mc_count=3
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() entry
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() exit addr=ffff81003393a288
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() entry
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() exit addr=ffff81003393a2c8
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() entry
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() exit addr=ffff81003f88e988
>ixgbevf 0000:00:06.0: ixgbevf_set_rx_mode() exit
>ixgbevf 0000:00:06.0: ixgbevf_set_rx_mode() entry mc_count=3
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() entry
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() exit addr=ffff81003393a288
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() entry
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() exit addr=ffff81003393a2c8
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() entry
>ixgbevf 0000:00:06.0: ixgbevf_addr_list_itr() exit addr=ffff81003f88e988
>ixgbevf 0000:00:06.0: ixgbevf_set_rx_mode() exit
>stack segment: 0000 [1] SMP 
>last sysfs file: /block/ram0/dev
>CPU 0 
>Modules linked in: ip_conntrack_netbios_ns ipt_REJECT xt_state ip_conntrack nfnetlink iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 xfrm_nalgo crypto_api dm_multipath scsi_dh video backlight sbs power_meter hwmon i2c_ec dell_wmi wmi button battery asus_acpi acpi_memhotplug ac parport_pc lp parport floppy xen_vnif xen_balloon xen_vbd joydev pcspkr i2c_piix4 i2c_core e1000 ixgbevf xen_platform_pci 8021q tpm_tis tpm tpm_bios ide_cd serio_raw cdrom dm_raid45 dm_message dm_region_hash dm_mem_cache dm_snapshot dm_zero dm_mirror dm_log dm_mod ata_piix libata sd_mod scsi_mod ext3 jbd uhci_hcd ohci_hcd ehci_hcd
>Pid: 1916, comm: ifconfig Not tainted 2.6.18-308.20.1.el5.bz862862_ixgbevf_crash_3 #1
>RIP: 0010:[<ffffffff88212cd7>]  [<ffffffff88212cd7>] :ixgbevf:ixgbevf_xmit_frame+0x4b1/0x8b1
>RSP: 0018:ffffffff804b1d58  EFLAGS: 00010246
>RAX: 0000000000000000 RBX: 000000000000005a RCX: 0000000000000001
>RDX: ffff810037f60000 RSI: ffff81000078626d RDI: 0000000000000000
>RBP: ff805854c0ffffdf R08: 0000000000000000 R09: 000000000000004c
>R10: 0000000080000000 R11: ffffffff8844e9c0 R12: 0000000090ffffff
>R13: ffff810033895ac0 R14: 000000000000005a R15: ffff81000078626d
>FS:  00002b09dc9f2710(0000) GS:ffffffff80432000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 00002b09dc36da9c CR3: 0000000033bd9000 CR4: 00000000000006a0
>Process ifconfig (pid: 1916, threadinfo ffff8100340d6000, task ffff810037fe67e0)
>Stack:  ffff81003ebe3000 ffff81003ebe3500 0000000090ffffff ffffffff0044e9f4
> 0000000100000000 000000000000005a ffff810037f60000 00000000804b1eb8
> 000000000000005a ffffffff804b1e38 ffff81003ebe3000 ffff81003ebe3000
>Call Trace:
> <IRQ>  [<ffffffff8023a081>] dev_hard_start_xmit+0x1b7/0x28a
> [<ffffffff8024a191>] __qdisc_run+0x136/0x1f6
> [<ffffffff883e27eb>] :ipv6:mld_dev_queue_xmit+0x0/0xc4
> [<ffffffff8002f701>] dev_queue_xmit+0x17e/0x2a3
> [<ffffffff883e21f8>] :ipv6:mld_sendpack+0x1fe/0x339
> [<ffffffff8006f862>] main_timer_handler+0x371/0x559
> [<ffffffff883e2fc7>] :ipv6:mld_ifc_timer_expire+0x1dc/0x20c
> [<ffffffff883e2deb>] :ipv6:mld_ifc_timer_expire+0x0/0x20c
> [<ffffffff8009a217>] run_timer_softirq+0x18d/0x23a
> [<ffffffff8001258d>] __do_softirq+0x89/0x133
> [<ffffffff8005e2fc>] call_softirq+0x1c/0x28
> <EOI>  [<ffffffff8006d646>] do_softirq+0x2c/0x7d
> [<ffffffff80096e9c>] local_bh_enable_ip+0x48/0x5a
> [<ffffffff80239336>] dev_change_flags+0x69/0x119
> [<ffffffff8026db05>] devinet_ioctl+0x235/0x59c
> [<ffffffff8023021b>] sock_ioctl+0x1c1/0x1e5
> [<ffffffff80041fb1>] do_ioctl+0x21/0x6b
> [<ffffffff8002fffc>] vfs_ioctl+0x457/0x4b9
> [<ffffffff8001aed1>] remove_vma+0x5d/0x64
> [<ffffffff8004c3b5>] sys_ioctl+0x59/0x78
> [<ffffffff8005d116>] system_call+0x7e/0x83
>
>
>Code: 66 44 89 75 18 66 c7 45 1c 00 00 48 8b 54 24 08 8b 74 24 2c 
>RIP  [<ffffffff88212cd7>] :ixgbevf:ixgbevf_xmit_frame+0x4b1/0x8b1
> RSP <ffffffff804b1d58>
> <0>Kernel panic - not syncing: Fatal exception
>

Actions: View

Attachments on bug 862862: 624960 | 629093 | 653948 | 653952 | 663166 | 663204 | 663206 | 672173 | 672220 | 674634 | 674635 | 674871 | 674973 | 675360 | 675802