Attachment 675538 Details for Bug 893562 – logs

logs

engine-setup_2013_01_09_02_53_02.log (text/x-log), 14.32 KB, created by Kiril Nesenko on 2013-01-09 13:09:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kiril Nesenko

Created: 2013-01-09 13:09:01 UTC

Size: 14.32 KB

patch

obsolete

>2013-01-09 02:53:02::DEBUG::engine-setup::2088::root:: importing module example_plugin_000, from file example_plugin_000.py
>2013-01-09 02:53:02::DEBUG::example_plugin_000::17::root:: plugin example_plugin_000 loaded
>2013-01-09 02:53:02::DEBUG::common_utils::427::root:: Executing command --> '/sbin/ip addr'
>2013-01-09 02:53:02::DEBUG::common_utils::465::root:: output = 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
>    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>    inet 127.0.0.1/8 scope host lo
>    inet6 ::1/128 scope host 
>       valid_lft forever preferred_lft forever
>2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
>    link/ether 00:1a:4a:23:10:e7 brd ff:ff:ff:ff:ff:ff
>    inet 10.35.17.135/22 brd 10.35.19.255 scope global eth0
>    inet6 fe80::21a:4aff:fe23:10e7/64 scope link 
>       valid_lft forever preferred_lft forever
>
>2013-01-09 02:53:02::DEBUG::common_utils::466::root:: stderr = 
>2013-01-09 02:53:02::DEBUG::common_utils::467::root:: retcode = 0
>2013-01-09 02:53:02::DEBUG::common_utils::586::root:: Found IP Address: 10.35.17.135
>2013-01-09 02:53:02::DEBUG::engine-setup::2037::root:: initiating command line option parser
>2013-01-09 02:53:02::DEBUG::engine-setup::2004::root:: checking total memory
>2013-01-09 02:53:02::DEBUG::common_utils::427::root:: Executing command --> '/usr/bin/free -m'
>2013-01-09 02:53:02::DEBUG::common_utils::465::root:: output =              total       used       free     shared    buffers     cached
>Mem:          2939       1845       1093          0         91       1547
>-/+ buffers/cache:        206       2732
>Swap:         9519          0       9519
>
>2013-01-09 02:53:02::DEBUG::common_utils::466::root:: stderr = 
>2013-01-09 02:53:02::DEBUG::common_utils::467::root:: retcode = 0
>2013-01-09 02:53:02::DEBUG::engine-setup::2016::root:: Found a match, amount of memory: 2939
>2013-01-09 02:53:02::WARNING::engine-setup::2027::root:: There is less then 4096 available memory 
>2013-01-09 02:53:02::DEBUG::common_utils::324::root:: YUM: VERB: Loaded plugins: versionlock
>2013-01-09 02:53:02::DEBUG::engine-setup::1918::root:: Entered main(configFile='None')
>2013-01-09 02:53:02::DEBUG::engine-setup::1712::root:: stopping ovirt-engine service
>2013-01-09 02:53:02::DEBUG::common_utils::964::root:: asking user: Would you like to stop the ovirt-engine service? (yes|no): 
>2013-01-09 02:53:03::DEBUG::common_utils::968::root:: user answered: yes
>2013-01-09 02:53:03::DEBUG::common_utils::1208::root:: stopping ovirt-engine
>2013-01-09 02:53:03::DEBUG::common_utils::1245::root:: executing action ovirt-engine on service stop
>2013-01-09 02:53:03::DEBUG::common_utils::427::root:: Executing command --> '/sbin/service ovirt-engine stop'
>2013-01-09 02:53:03::DEBUG::common_utils::465::root:: output = 
>2013-01-09 02:53:03::DEBUG::common_utils::466::root:: stderr = Redirecting to /bin/systemctl stop  ovirt-engine.service
>
>2013-01-09 02:53:03::DEBUG::common_utils::467::root:: retcode = 0
>2013-01-09 02:53:03::DEBUG::engine-setup::1442::root:: going over group PORTS
>2013-01-09 02:53:03::DEBUG::common_utils::1269::root:: retrieving version for ipa-server rpm
>2013-01-09 02:53:03::DEBUG::common_utils::324::root:: YUM: VERB: Loaded plugins: versionlock
>2013-01-09 02:53:04::DEBUG::common_utils::1290::root:: getRpmVersion failed
>Traceback (most recent call last):
>  File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1287, in installed
>    getRpmVersion(rpmName=rpm)
>  File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1281, in getRpmVersion
>    raise Exception(output_messages.ERR_READ_RPM_VER % rpmName)
>Exception: Error reading version number for package ipa-server
>2013-01-09 02:53:04::DEBUG::common_utils::1269::root:: retrieving version for freeipa-server rpm
>2013-01-09 02:53:04::DEBUG::common_utils::324::root:: YUM: VERB: Loaded plugins: versionlock
>2013-01-09 02:53:04::DEBUG::common_utils::1290::root:: getRpmVersion failed
>Traceback (most recent call last):
>  File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1287, in installed
>    getRpmVersion(rpmName=rpm)
>  File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1281, in getRpmVersion
>    raise Exception(output_messages.ERR_READ_RPM_VER % rpmName)
>Exception: Error reading version number for package freeipa-server
>2013-01-09 02:53:04::INFO::engine-setup::1451::root:: Comparing pre-conditions; condition: 'True', and match: 'True'
>2013-01-09 02:53:06::INFO::engine_validators::199::root:: validateOverrideHttpdConfAndChangePortsAccordingly yes as part of ['yes', 'no']
>2013-01-09 02:53:06::INFO::engine_validators::182::root:: Validating yes as part of ['yes', 'no']
>2013-01-09 02:53:06::DEBUG::engine_validators::207::root:: stopping httpd service
>2013-01-09 02:53:06::DEBUG::common_utils::1208::root:: stopping httpd
>2013-01-09 02:53:06::DEBUG::common_utils::1245::root:: executing action httpd on service stop
>2013-01-09 02:53:06::DEBUG::common_utils::427::root:: Executing command --> '/sbin/service httpd stop'
>2013-01-09 02:53:06::DEBUG::common_utils::465::root:: output = 
>2013-01-09 02:53:06::DEBUG::common_utils::466::root:: stderr = Redirecting to /bin/systemctl stop  httpd.service
>
>2013-01-09 02:53:06::DEBUG::common_utils::467::root:: retcode = 0
>2013-01-09 02:53:12::DEBUG::engine_validators::62::root:: Validating 80 as a valid TCP Port
>2013-01-09 02:53:12::DEBUG::common_utils::391::root:: Checking if TCP port 80 is open by any process
>2013-01-09 02:53:12::DEBUG::common_utils::427::root:: Executing command --> '/usr/sbin/lsof -i -n -P'
>2013-01-09 02:53:12::DEBUG::common_utils::465::root:: output = COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
>dhclient  742 root    6u  IPv4  13811      0t0  UDP *:68 
>dhclient  742 root   20u  IPv4  13790      0t0  UDP *:51341 
>dhclient  742 root   21u  IPv6  13791      0t0  UDP *:3327 
>sendmail  811 root    4u  IPv4  14916      0t0  TCP 127.0.0.1:25 (LISTEN)
>sshd      836 root    3u  IPv4  15126      0t0  TCP *:22 (LISTEN)
>sshd      836 root    4u  IPv6  15136      0t0  TCP *:22 (LISTEN)
>sshd     8782 root    3u  IPv4  23608      0t0  TCP 10.35.17.135:22->10.35.203.67:53167 (ESTABLISHED)
>
>2013-01-09 02:53:12::DEBUG::common_utils::466::root:: stderr = 
>2013-01-09 02:53:12::DEBUG::common_utils::467::root:: retcode = 0
>2013-01-09 02:53:12::DEBUG::common_utils::427::root:: Executing command --> '/usr/sbin/semanage port -l'
>2013-01-09 02:53:12::DEBUG::common_utils::465::root:: output = 
>2013-01-09 02:53:12::DEBUG::common_utils::466::root:: stderr = ERROR: Could not determine running system's policy version.
>ERROR: Unable to open policy /etc/selinux/targeted/policy/policy.27.
>Traceback (most recent call last):
>  File "/usr/sbin/semanage", line 25, in <module>
>    import seobject
>  File "/usr/lib64/python2.7/site-packages/seobject.py", line 27, in <module>
>    import sepolicy
>  File "/usr/lib64/python2.7/site-packages/sepolicy/__init__.py", line 61, in <module>
>    policy(policy_file)
>  File "/usr/lib64/python2.7/site-packages/sepolicy/__init__.py", line 54, in policy
>    raise ValueError(_("Failed to read % policy file") % policy_file)
>ValueError: unsupported format character 'p' (0x70) at index 17
>
>2013-01-09 02:53:12::DEBUG::common_utils::467::root:: retcode = 1
>2013-01-09 02:53:12::WARNING::engine_validators::88::root:: Error: failed adding port 80 to http_port_t because it is already preallocated in selinux.
>2013-01-09 02:53:19::DEBUG::engine_validators::62::root:: Validating 8080 as a valid TCP Port
>2013-01-09 02:53:19::DEBUG::common_utils::391::root:: Checking if TCP port 8080 is open by any process
>2013-01-09 02:53:19::DEBUG::common_utils::427::root:: Executing command --> '/usr/sbin/lsof -i -n -P'
>2013-01-09 02:53:19::DEBUG::common_utils::465::root:: output = COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
>dhclient  742 root    6u  IPv4  13811      0t0  UDP *:68 
>dhclient  742 root   20u  IPv4  13790      0t0  UDP *:51341 
>dhclient  742 root   21u  IPv6  13791      0t0  UDP *:3327 
>sendmail  811 root    4u  IPv4  14916      0t0  TCP 127.0.0.1:25 (LISTEN)
>sshd      836 root    3u  IPv4  15126      0t0  TCP *:22 (LISTEN)
>sshd      836 root    4u  IPv6  15136      0t0  TCP *:22 (LISTEN)
>sshd     8782 root    3u  IPv4  23608      0t0  TCP 10.35.17.135:22->10.35.203.67:53167 (ESTABLISHED)
>
>2013-01-09 02:53:19::DEBUG::common_utils::466::root:: stderr = 
>2013-01-09 02:53:19::DEBUG::common_utils::467::root:: retcode = 0
>2013-01-09 02:53:19::DEBUG::common_utils::427::root:: Executing command --> '/usr/sbin/semanage port -l'
>2013-01-09 02:53:19::DEBUG::common_utils::465::root:: output = 
>2013-01-09 02:53:19::DEBUG::common_utils::466::root:: stderr = ERROR: Could not determine running system's policy version.
>ERROR: Unable to open policy /etc/selinux/targeted/policy/policy.27.
>Traceback (most recent call last):
>  File "/usr/sbin/semanage", line 25, in <module>
>    import seobject
>  File "/usr/lib64/python2.7/site-packages/seobject.py", line 27, in <module>
>    import sepolicy
>  File "/usr/lib64/python2.7/site-packages/sepolicy/__init__.py", line 61, in <module>
>    policy(policy_file)
>  File "/usr/lib64/python2.7/site-packages/sepolicy/__init__.py", line 54, in policy
>    raise ValueError(_("Failed to read % policy file") % policy_file)
>ValueError: unsupported format character 'p' (0x70) at index 17
>
>2013-01-09 02:53:19::DEBUG::common_utils::467::root:: retcode = 1
>2013-01-09 02:53:19::WARNING::engine_validators::88::root:: Error: failed adding port 8080 to http_port_t because it is already preallocated in selinux.
>2013-01-09 02:53:26::DEBUG::engine_validators::62::root:: Validating 9999 as a valid TCP Port
>2013-01-09 02:53:26::DEBUG::common_utils::391::root:: Checking if TCP port 9999 is open by any process
>2013-01-09 02:53:26::DEBUG::common_utils::427::root:: Executing command --> '/usr/sbin/lsof -i -n -P'
>2013-01-09 02:53:26::DEBUG::common_utils::465::root:: output = COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
>dhclient  742 root    6u  IPv4  13811      0t0  UDP *:68 
>dhclient  742 root   20u  IPv4  13790      0t0  UDP *:51341 
>dhclient  742 root   21u  IPv6  13791      0t0  UDP *:3327 
>sendmail  811 root    4u  IPv4  14916      0t0  TCP 127.0.0.1:25 (LISTEN)
>sshd      836 root    3u  IPv4  15126      0t0  TCP *:22 (LISTEN)
>sshd      836 root    4u  IPv6  15136      0t0  TCP *:22 (LISTEN)
>sshd     8782 root    3u  IPv4  23608      0t0  TCP 10.35.17.135:22->10.35.203.67:53167 (ESTABLISHED)
>
>2013-01-09 02:53:26::DEBUG::common_utils::466::root:: stderr = 
>2013-01-09 02:53:26::DEBUG::common_utils::467::root:: retcode = 0
>2013-01-09 02:53:26::DEBUG::common_utils::427::root:: Executing command --> '/usr/sbin/semanage port -l'
>2013-01-09 02:53:26::DEBUG::common_utils::465::root:: output = 
>2013-01-09 02:53:26::DEBUG::common_utils::466::root:: stderr = ERROR: Could not determine running system's policy version.
>ERROR: Unable to open policy /etc/selinux/targeted/policy/policy.27.
>Traceback (most recent call last):
>  File "/usr/sbin/semanage", line 25, in <module>
>    import seobject
>  File "/usr/lib64/python2.7/site-packages/seobject.py", line 27, in <module>
>    import sepolicy
>  File "/usr/lib64/python2.7/site-packages/sepolicy/__init__.py", line 61, in <module>
>    policy(policy_file)
>  File "/usr/lib64/python2.7/site-packages/sepolicy/__init__.py", line 54, in policy
>    raise ValueError(_("Failed to read % policy file") % policy_file)
>ValueError: unsupported format character 'p' (0x70) at index 17
>
>2013-01-09 02:53:26::DEBUG::common_utils::467::root:: retcode = 1
>2013-01-09 02:53:26::WARNING::engine_validators::88::root:: Error: failed adding port 9999 to http_port_t because it is already preallocated in selinux.
>2013-01-09 02:53:36::DEBUG::engine_validators::62::root:: Validating 5678 as a valid TCP Port
>2013-01-09 02:53:36::DEBUG::common_utils::391::root:: Checking if TCP port 5678 is open by any process
>2013-01-09 02:53:36::DEBUG::common_utils::427::root:: Executing command --> '/usr/sbin/lsof -i -n -P'
>2013-01-09 02:53:36::DEBUG::common_utils::465::root:: output = COMMAND   PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
>dhclient  742 root    6u  IPv4  13811      0t0  UDP *:68 
>dhclient  742 root   20u  IPv4  13790      0t0  UDP *:51341 
>dhclient  742 root   21u  IPv6  13791      0t0  UDP *:3327 
>sendmail  811 root    4u  IPv4  14916      0t0  TCP 127.0.0.1:25 (LISTEN)
>sshd      836 root    3u  IPv4  15126      0t0  TCP *:22 (LISTEN)
>sshd      836 root    4u  IPv6  15136      0t0  TCP *:22 (LISTEN)
>sshd     8782 root    3u  IPv4  23608      0t0  TCP 10.35.17.135:22->10.35.203.67:53167 (ESTABLISHED)
>
>2013-01-09 02:53:36::DEBUG::common_utils::466::root:: stderr = 
>2013-01-09 02:53:36::DEBUG::common_utils::467::root:: retcode = 0
>2013-01-09 02:53:36::DEBUG::common_utils::427::root:: Executing command --> '/usr/sbin/semanage port -l'
>2013-01-09 02:53:36::DEBUG::common_utils::465::root:: output = 
>2013-01-09 02:53:36::DEBUG::common_utils::466::root:: stderr = ERROR: Could not determine running system's policy version.
>ERROR: Unable to open policy /etc/selinux/targeted/policy/policy.27.
>Traceback (most recent call last):
>  File "/usr/sbin/semanage", line 25, in <module>
>    import seobject
>  File "/usr/lib64/python2.7/site-packages/seobject.py", line 27, in <module>
>    import sepolicy
>  File "/usr/lib64/python2.7/site-packages/sepolicy/__init__.py", line 61, in <module>
>    policy(policy_file)
>  File "/usr/lib64/python2.7/site-packages/sepolicy/__init__.py", line 54, in policy
>    raise ValueError(_("Failed to read % policy file") % policy_file)
>ValueError: unsupported format character 'p' (0x70) at index 17
>
>2013-01-09 02:53:36::DEBUG::common_utils::467::root:: retcode = 1
>2013-01-09 02:53:36::WARNING::engine_validators::88::root:: Error: failed adding port 5678 to http_port_t because it is already preallocated in selinux.
>2013-01-09 02:53:38::ERROR::engine-setup::1484::root:: keyboard interrupt caught
>2013-01-09 02:53:38::DEBUG::engine-setup::1785::root:: *** The following params were used as user input:
>2013-01-09 02:53:38::DEBUG::engine-setup::1790::root:: override-httpd-config: yes
>2013-01-09 02:53:38::ERROR::engine-setup::2194::root:: Traceback (most recent call last):
>  File "/usr/bin/engine-setup", line 2188, in <module>
>    main(confFile)
>  File "/usr/bin/engine-setup", line 1938, in main
>    _handleParams(configFile)
>  File "/usr/bin/engine-setup", line 1499, in _handleParams
>    _handleInteractiveParams()
>  File "/usr/bin/engine-setup", line 1485, in _handleInteractiveParams
>    raise Exception(output_messages.ERR_EXP_KEYBOARD_INTERRUPT)
>Exception: Keyboard interrupt caught.
>

Actions: View

Attachments on bug 893562: 675538