Attachment 678003 Details for Bug 894929 – File: dmesg

File: dmesg

dmesg (text/plain), 224.65 KB, created by Steevithak on 2013-01-14 03:15:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Steevithak

Created: 2013-01-14 03:15:19 UTC

Size: 224.65 KB

patch

obsolete

>[257439.421424] firewire_core 0000:07:00.3: rediscovered device fw0
>[257441.722016] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[257441.727536] ata1.00: configured for UDMA/133
>[257441.727675] sd 0:0:0:0: [sda] Starting disk
>[257441.730142] Extended CMOS year: 2000
>[257441.750501] PM: resume of devices complete after 2885.273 msecs
>[257441.750633] PM: Finishing wakeup.
>[257441.750634] Restarting tasks ... done.
>[257441.781009] video LNXVIDEO:00: Restoring backlight state
>[257441.978073] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[257441.985099] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[257442.100848] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[257442.169334] r8169 0000:09:00.0: p12p1: link down
>[257442.169382] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[257447.797537] wlan0: authenticate with 20:cf:30:c6:2e:84
>[257447.821080] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[257447.822988] wlan0: authenticated
>[257447.824023] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[257447.827350] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=2)
>[257447.829938] wlan0: associated
>[257447.829987] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[286199.317172] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[286199.363031] cfg80211: Calling CRDA to update world regulatory domain
>[286199.448109] cfg80211: World regulatory domain updated:
>[286199.448115] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[286199.448118] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[286199.448121] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[286199.448123] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[286199.448125] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[286199.448128] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[286199.448141] cfg80211: Calling CRDA for country: US
>[286199.450858] cfg80211: Regulatory domain changed to country: US
>[286199.450860] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[286199.450862] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[286199.450864] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[286199.450865] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[286199.450867] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[286199.450868] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[286199.450869] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[286201.749920] PM: Syncing filesystems ... done.
>[286201.760859] PM: Preparing system for mem sleep
>[286202.447325] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[286202.458927] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[286202.469864] PM: Entering mem sleep
>[286202.469969] Suspending console(s) (use no_console_suspend to debug)
>[286202.470350] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[286202.470545] sd 0:0:0:0: [sda] Stopping disk
>[286202.515829] ACPI handle has no context!
>[286204.445035] PM: suspend of devices complete after 1978.759 msecs
>[286204.445205] PM: late suspend of devices complete after 0.168 msecs
>[286204.445386] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[286204.467068] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[286204.499870] PM: noirq suspend of devices complete after 54.764 msecs
>[286204.500089] ACPI: Preparing to enter system sleep state S3
>[286204.503333] PM: Saving platform NVS memory
>[286204.505799] Disabling non-boot CPUs ...
>[286204.506162] Broke affinity for irq 44
>[286204.507378] smpboot: CPU 1 is now offline
>[286204.509206] smpboot: CPU 2 is now offline
>[286204.509961] Broke affinity for irq 23
>[286204.510984] smpboot: CPU 3 is now offline
>[286204.511514] Extended CMOS year: 2000
>[286204.512240] ACPI: Low-level resume complete
>[286204.512301] PM: Restoring platform NVS memory
>[286204.512802] Extended CMOS year: 2000
>[286204.512838] CPU0: Thermal monitoring handled by SMI
>[286204.513065] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[286204.513113] Enabling non-boot CPUs ...
>[286204.513257] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[286204.524283] CPU1: Thermal monitoring handled by SMI
>[286204.527910] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[286204.527915] CPU1 is up
>[286204.527977] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[286204.539002] CPU2: Thermal monitoring handled by SMI
>[286204.541776] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[286204.541780] CPU2 is up
>[286204.541841] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[286204.552864] CPU3: Thermal monitoring handled by SMI
>[286204.555707] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[286204.555712] CPU3 is up
>[286204.558402] ACPI: Waking up from system sleep state S3
>[286204.607972] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[286204.684970] PM: noirq resume of devices complete after 121.166 msecs
>[286204.685123] PM: early resume of devices complete after 0.039 msecs
>[286204.685180] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[286204.685233] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[286204.685261] pci 0000:00:1e.0: setting latency timer to 64
>[286204.685262] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[286204.685281] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[286204.685284] ahci 0000:00:1f.2: setting latency timer to 64
>[286204.685423] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[286204.685472] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[286204.685500] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[286204.686304] mei 0000:00:16.0: wd: failed to find the client
>[286204.687435] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[286204.708892] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[286204.708988] radeon 0000:02:00.0: WB enabled
>[286204.708991] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[286204.755631] [drm] ring test on 0 succeeded in 0 usecs
>[286204.755653] [drm] ib test on ring 0 succeeded in 0 usecs
>[286204.915613] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[286204.991172] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[286204.993164] ata5: SATA link down (SStatus 0 SControl 300)
>[286205.018891] ata2.00: configured for UDMA/100
>[286205.184778] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[286205.255667] firewire_core 0000:07:00.3: rediscovered device fw0
>[286207.483355] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[286207.495457] ata1.00: configured for UDMA/133
>[286207.495635] sd 0:0:0:0: [sda] Starting disk
>[286207.497472] Extended CMOS year: 2000
>[286207.518197] PM: resume of devices complete after 2838.578 msecs
>[286207.518388] PM: Finishing wakeup.
>[286207.518389] Restarting tasks ... done.
>[286207.554897] video LNXVIDEO:00: Restoring backlight state
>[286207.803663] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[286207.812435] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[286207.918471] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[286207.977703] r8169 0000:09:00.0: p12p1: link down
>[286207.977748] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[286213.316467] wlan0: authenticate with 20:cf:30:c6:2e:84
>[286213.359767] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[286213.361721] wlan0: authenticated
>[286213.361997] wlan0: waiting for beacon from 20:cf:30:c6:2e:84
>[286213.458731] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[286213.462099] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[286213.464304] wlan0: associated
>[286213.464366] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[289843.569242] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[289843.632681] cfg80211: Calling CRDA to update world regulatory domain
>[289843.670474] cfg80211: World regulatory domain updated:
>[289843.670480] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[289843.670483] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[289843.670485] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[289843.670487] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[289843.670489] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[289843.670491] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[289843.670505] cfg80211: Calling CRDA for country: US
>[289843.673857] cfg80211: Regulatory domain changed to country: US
>[289843.673862] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[289843.673865] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[289843.673867] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[289843.673868] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[289843.673870] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[289843.673872] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[289843.673874] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[289845.234597] PM: Syncing filesystems ... done.
>[289845.245450] PM: Preparing system for mem sleep
>[289845.921146] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[289845.932796] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[289845.943722] PM: Entering mem sleep
>[289845.943822] Suspending console(s) (use no_console_suspend to debug)
>[289845.944218] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[289845.944284] sd 0:0:0:0: [sda] Stopping disk
>[289845.946198] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[289845.990610] ACPI handle has no context!
>[289847.797090] PM: suspend of devices complete after 1856.727 msecs
>[289847.797261] PM: late suspend of devices complete after 0.169 msecs
>[289847.797490] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[289847.819159] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[289847.851971] PM: noirq suspend of devices complete after 54.813 msecs
>[289847.852115] ACPI: Preparing to enter system sleep state S3
>[289847.855429] PM: Saving platform NVS memory
>[289847.857910] Disabling non-boot CPUs ...
>[289847.858248] Broke affinity for irq 44
>[289847.859457] smpboot: CPU 1 is now offline
>[289847.861236] smpboot: CPU 2 is now offline
>[289847.861898] Broke affinity for irq 23
>[289847.862928] smpboot: CPU 3 is now offline
>[289847.863407] Extended CMOS year: 2000
>[289847.864135] ACPI: Low-level resume complete
>[289847.864195] PM: Restoring platform NVS memory
>[289847.864695] Extended CMOS year: 2000
>[289847.864730] CPU0: Thermal monitoring handled by SMI
>[289847.864954] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[289847.864984] Enabling non-boot CPUs ...
>[289847.876368] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[289847.887394] CPU1: Thermal monitoring handled by SMI
>[289847.890988] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[289847.890995] CPU1 is up
>[289847.891057] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[289847.902081] CPU2: Thermal monitoring handled by SMI
>[289847.904898] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[289847.904903] CPU2 is up
>[289847.904960] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[289847.915983] CPU3: Thermal monitoring handled by SMI
>[289847.918816] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[289847.918820] CPU3 is up
>[289847.921510] ACPI: Waking up from system sleep state S3
>[289847.973048] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[289848.050043] PM: noirq resume of devices complete after 121.166 msecs
>[289848.050199] PM: early resume of devices complete after 0.039 msecs
>[289848.050253] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[289848.050294] pci 0000:00:1e.0: setting latency timer to 64
>[289848.050298] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[289848.050312] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[289848.050318] ahci 0000:00:1f.2: setting latency timer to 64
>[289848.050358] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[289848.050531] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[289848.050563] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[289848.050646] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[289848.051361] mei 0000:00:16.0: wd: failed to find the client
>[289848.052429] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[289848.074641] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[289848.074750] radeon 0000:02:00.0: WB enabled
>[289848.074753] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[289848.121352] [drm] ring test on 0 succeeded in 1 usecs
>[289848.121373] [drm] ib test on ring 0 succeeded in 0 usecs
>[289848.282625] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[289848.356262] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[289848.359204] ata5: SATA link down (SStatus 0 SControl 300)
>[289848.383714] ata2.00: configured for UDMA/100
>[289848.549862] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[289848.755111] firewire_core 0000:07:00.3: rediscovered device fw0
>[289850.899321] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[289850.905222] ata1.00: configured for UDMA/133
>[289850.905463] sd 0:0:0:0: [sda] Starting disk
>[289850.927959] PM: resume of devices complete after 2883.355 msecs
>[289850.928087] PM: Finishing wakeup.
>[289850.928089] Restarting tasks ... done.
>[289850.967695] video LNXVIDEO:00: Restoring backlight state
>[289851.144936] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[289851.158495] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[289851.275909] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[289851.340298] r8169 0000:09:00.0: p12p1: link down
>[289851.340586] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[289854.027467] usb 2-1.1: new low-speed USB device number 11 using ehci_hcd
>[289854.107036] usb 2-1.1: New USB device found, idVendor=413c, idProduct=3012
>[289854.107042] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[289854.107046] usb 2-1.1: Product: Dell USB Optical Mouse
>[289854.107049] usb 2-1.1: Manufacturer: Dell
>[289854.111097] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input12
>[289854.112029] hid-generic 0003:413C:3012.0002: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[289856.455892] wlan0: authenticate with 58:6d:8f:07:37:43
>[289856.524710] wlan0: send auth to 58:6d:8f:07:37:43 (try 1/3)
>[289856.525960] wlan0: authenticated
>[289856.526175] wlan0: waiting for beacon from 58:6d:8f:07:37:43
>[289856.549320] wlan0: associate with 58:6d:8f:07:37:43 (try 1/3)
>[289856.551092] wlan0: RX AssocResp from 58:6d:8f:07:37:43 (capab=0x11 status=0 aid=2)
>[289856.554380] wlan0: associated
>[289856.554435] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[312716.308144] wlan0: deauthenticating from 58:6d:8f:07:37:43 by local choice (reason=3)
>[312716.346427] cfg80211: Calling CRDA to update world regulatory domain
>[312716.485306] cfg80211: World regulatory domain updated:
>[312716.485310] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[312716.485312] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[312716.485313] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[312716.485315] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[312716.485316] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[312716.485318] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[312716.485333] cfg80211: Calling CRDA for country: US
>[312716.488271] cfg80211: Regulatory domain changed to country: US
>[312716.488274] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[312716.488277] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[312716.488279] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[312716.488281] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[312716.488283] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[312716.488285] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[312716.488287] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[312721.309725] PM: Syncing filesystems ... done.
>[312721.742508] PM: Preparing system for mem sleep
>[312722.488296] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[312722.500422] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[312722.511279] PM: Entering mem sleep
>[312722.511425] Suspending console(s) (use no_console_suspend to debug)
>[312722.512983] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[312722.513052] sd 0:0:0:0: [sda] Stopping disk
>[312722.559157] ACPI handle has no context!
>[312724.250869] PM: suspend of devices complete after 1742.696 msecs
>[312724.251045] PM: late suspend of devices complete after 0.173 msecs
>[312724.251277] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[312724.272898] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[312724.305721] PM: noirq suspend of devices complete after 54.779 msecs
>[312724.305939] ACPI: Preparing to enter system sleep state S3
>[312724.309187] PM: Saving platform NVS memory
>[312724.310905] Disabling non-boot CPUs ...
>[312724.311259] Broke affinity for irq 44
>[312724.312299] smpboot: CPU 1 is now offline
>[312724.314168] smpboot: CPU 2 is now offline
>[312724.314867] Broke affinity for irq 23
>[312724.315889] smpboot: CPU 3 is now offline
>[312724.316394] Extended CMOS year: 2000
>[312724.317121] ACPI: Low-level resume complete
>[312724.317181] PM: Restoring platform NVS memory
>[312724.317679] Extended CMOS year: 2000
>[312724.317714] CPU0: Thermal monitoring handled by SMI
>[312724.317940] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[312724.317985] Enabling non-boot CPUs ...
>[312724.318114] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[312724.329139] CPU1: Thermal monitoring handled by SMI
>[312724.332736] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[312724.332742] CPU1 is up
>[312724.332803] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[312724.343827] CPU2: Thermal monitoring handled by SMI
>[312724.346613] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[312724.346617] CPU2 is up
>[312724.346679] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[312724.357701] CPU3: Thermal monitoring handled by SMI
>[312724.360540] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[312724.360545] CPU3 is up
>[312724.363249] ACPI: Waking up from system sleep state S3
>[312724.412823] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[312724.489818] PM: noirq resume of devices complete after 121.167 msecs
>[312724.489973] PM: early resume of devices complete after 0.040 msecs
>[312724.490030] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[312724.490071] pci 0000:00:1e.0: setting latency timer to 64
>[312724.490077] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[312724.490090] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[312724.490096] ahci 0000:00:1f.2: setting latency timer to 64
>[312724.490136] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[312724.490262] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[312724.490331] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[312724.490335] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[312724.491386] mei 0000:00:16.0: wd: failed to find the client
>[312724.492225] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[312724.513772] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[312724.513866] radeon 0000:02:00.0: WB enabled
>[312724.513869] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[312724.560480] [drm] ring test on 0 succeeded in 1 usecs
>[312724.560502] [drm] ib test on ring 0 succeeded in 0 usecs
>[312724.722291] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[312724.797031] ata5: SATA link down (SStatus 0 SControl 300)
>[312724.799036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[312724.826757] ata2.00: configured for UDMA/100
>[312724.989650] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[312725.040543] firewire_core 0000:07:00.3: rediscovered device fw0
>[312727.288170] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[312727.300665] ata1.00: configured for UDMA/133
>[312727.300802] sd 0:0:0:0: [sda] Starting disk
>[312727.303392] Extended CMOS year: 2000
>[312727.323407] PM: resume of devices complete after 2838.971 msecs
>[312727.323540] PM: Finishing wakeup.
>[312727.326755] usb 2-1.1: USB disconnect, device number 11
>[312727.323541] Restarting tasks ... done.
>[312727.383531] video LNXVIDEO:00: Restoring backlight state
>[312728.144910] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[312728.154059] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[312728.286142] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[312728.346410] r8169 0000:09:00.0: p12p1: link down
>[312728.346477] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[312733.791028] wlan0: authenticate with 20:cf:30:c6:2e:84
>[312733.846018] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[312733.849925] wlan0: authenticated
>[312733.850279] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[312733.858118] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[312733.861581] wlan0: associated
>[312733.861622] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[333762.117288] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[333762.147226] cfg80211: Calling CRDA to update world regulatory domain
>[333762.203549] cfg80211: World regulatory domain updated:
>[333762.203555] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[333762.203557] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[333762.203559] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[333762.203561] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[333762.203563] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[333762.203565] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[333762.203583] cfg80211: Calling CRDA for country: US
>[333762.207799] cfg80211: Regulatory domain changed to country: US
>[333762.207804] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[333762.207807] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[333762.207809] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[333762.207811] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[333762.207813] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[333762.207815] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[333762.207818] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[333763.638580] PM: Syncing filesystems ... done.
>[333763.646831] PM: Preparing system for mem sleep
>[333764.337370] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[333764.349020] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[333764.359947] PM: Entering mem sleep
>[333764.360043] Suspending console(s) (use no_console_suspend to debug)
>[333764.360408] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[333764.360578] sd 0:0:0:0: [sda] Stopping disk
>[333764.410838] ACPI handle has no context!
>[333766.139407] PM: suspend of devices complete after 1782.684 msecs
>[333766.139580] PM: late suspend of devices complete after 0.170 msecs
>[333766.139762] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[333766.161515] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[333766.194329] PM: noirq suspend of devices complete after 54.853 msecs
>[333766.194517] ACPI: Preparing to enter system sleep state S3
>[333766.198788] PM: Saving platform NVS memory
>[333766.200495] Disabling non-boot CPUs ...
>[333766.200854] Broke affinity for irq 44
>[333766.202063] smpboot: CPU 1 is now offline
>[333766.203901] smpboot: CPU 2 is now offline
>[333766.204636] Broke affinity for irq 23
>[333766.205660] smpboot: CPU 3 is now offline
>[333766.206179] Extended CMOS year: 2000
>[333766.206906] ACPI: Low-level resume complete
>[333766.206966] PM: Restoring platform NVS memory
>[333766.207467] Extended CMOS year: 2000
>[333766.207503] CPU0: Thermal monitoring handled by SMI
>[333766.207730] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[333766.207775] Enabling non-boot CPUs ...
>[333766.207902] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[333766.218928] CPU1: Thermal monitoring handled by SMI
>[333766.222935] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[333766.222940] CPU1 is up
>[333766.223003] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[333766.234026] CPU2: Thermal monitoring handled by SMI
>[333766.236846] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[333766.236852] CPU2 is up
>[333766.236908] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[333766.247931] CPU3: Thermal monitoring handled by SMI
>[333766.250768] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[333766.250772] CPU3 is up
>[333766.253471] ACPI: Waking up from system sleep state S3
>[333766.303427] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[333766.380424] PM: noirq resume of devices complete after 121.164 msecs
>[333766.380493] PM: early resume of devices complete after 0.040 msecs
>[333766.380596] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[333766.380598] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[333766.380670] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[333766.380680] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[333766.380694] pci 0000:00:1e.0: setting latency timer to 64
>[333766.380711] ahci 0000:00:1f.2: setting latency timer to 64
>[333766.380877] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[333766.380881] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[333766.381019] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[333766.382813] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[333766.404303] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[333766.404421] radeon 0000:02:00.0: WB enabled
>[333766.404424] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[333766.435888] mei 0000:00:16.0: wd: failed to find the client
>[333766.451067] [drm] ring test on 0 succeeded in 1 usecs
>[333766.451089] [drm] ib test on ring 0 succeeded in 0 usecs
>[333766.634962] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[333766.686645] ata5: SATA link down (SStatus 0 SControl 300)
>[333766.688642] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[333766.716540] ata2.00: configured for UDMA/100
>[333766.880264] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[333766.931178] firewire_core 0000:07:00.3: rediscovered device fw0
>[333769.178755] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[333769.191196] ata1.00: configured for UDMA/133
>[333769.191356] sd 0:0:0:0: [sda] Starting disk
>[333769.193156] Extended CMOS year: 2000
>[333769.213987] PM: resume of devices complete after 2839.011 msecs
>[333769.214115] PM: Finishing wakeup.
>[333769.214116] Restarting tasks ... done.
>[333769.244231] video LNXVIDEO:00: Restoring backlight state
>[333769.409767] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[333769.420834] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[333769.529356] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[333769.588286] r8169 0000:09:00.0: p12p1: link down
>[333769.588339] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[333775.088817] wlan0: authenticate with 20:cf:30:c6:2e:84
>[333775.122932] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[333775.126217] wlan0: authenticated
>[333775.127165] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[333775.143685] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[333775.145956] wlan0: associated
>[333775.145996] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[337956.011886] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[337956.053775] cfg80211: Calling CRDA to update world regulatory domain
>[337956.061035] cfg80211: World regulatory domain updated:
>[337956.061039] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[337956.061041] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[337956.061042] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[337956.061044] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[337956.061045] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[337956.061047] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[337956.061064] cfg80211: Calling CRDA for country: US
>[337956.063179] cfg80211: Regulatory domain changed to country: US
>[337956.063182] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[337956.063184] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[337956.063186] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[337956.063187] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[337956.063189] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[337956.063190] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[337956.063191] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[337957.295598] PM: Syncing filesystems ... done.
>[337957.303778] PM: Preparing system for mem sleep
>[337957.987098] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[337957.998881] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[337958.009811] PM: Entering mem sleep
>[337958.009909] Suspending console(s) (use no_console_suspend to debug)
>[337958.010278] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[337958.010348] sd 0:0:0:0: [sda] Stopping disk
>[337958.012297] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[337958.056725] ACPI handle has no context!
>[337959.760527] PM: suspend of devices complete after 1753.866 msecs
>[337959.760729] PM: late suspend of devices complete after 0.198 msecs
>[337959.760958] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[337959.782448] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[337959.815263] PM: noirq suspend of devices complete after 54.634 msecs
>[337959.815433] ACPI: Preparing to enter system sleep state S3
>[337959.818725] PM: Saving platform NVS memory
>[337959.820411] Disabling non-boot CPUs ...
>[337959.820795] Broke affinity for irq 44
>[337959.822009] smpboot: CPU 1 is now offline
>[337959.823971] smpboot: CPU 2 is now offline
>[337959.824673] Broke affinity for irq 23
>[337959.825697] smpboot: CPU 3 is now offline
>[337959.826194] Extended CMOS year: 2000
>[337959.826920] ACPI: Low-level resume complete
>[337959.826980] PM: Restoring platform NVS memory
>[337959.827485] Extended CMOS year: 2000
>[337959.827520] CPU0: Thermal monitoring handled by SMI
>[337959.827747] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[337959.827778] Enabling non-boot CPUs ...
>[337959.827907] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[337959.838932] CPU1: Thermal monitoring handled by SMI
>[337959.842548] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[337959.842561] CPU1 is up
>[337959.842619] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[337959.853643] CPU2: Thermal monitoring handled by SMI
>[337959.856418] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[337959.856422] CPU2 is up
>[337959.856477] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[337959.867500] CPU3: Thermal monitoring handled by SMI
>[337959.870333] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[337959.870337] CPU3 is up
>[337959.873037] ACPI: Waking up from system sleep state S3
>[337959.922376] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[337959.999370] PM: noirq resume of devices complete after 121.167 msecs
>[337959.999438] PM: early resume of devices complete after 0.039 msecs
>[337959.999505] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[337959.999555] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[337959.999572] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[337959.999584] pci 0000:00:1e.0: setting latency timer to 64
>[337959.999586] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[337959.999611] ahci 0000:00:1f.2: setting latency timer to 64
>[337959.999750] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[337959.999784] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[337959.999802] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[337960.001650] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[337960.004273] mei 0000:00:16.0: wd: failed to find the client
>[337960.023615] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[337960.023712] radeon 0000:02:00.0: WB enabled
>[337960.023715] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[337960.070280] [drm] ring test on 0 succeeded in 1 usecs
>[337960.070301] [drm] ib test on ring 0 succeeded in 0 usecs
>[337960.230867] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[337960.305595] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[337960.307580] ata5: SATA link down (SStatus 0 SControl 300)
>[337960.333598] ata2.00: configured for UDMA/100
>[337960.499192] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[337960.550096] firewire_core 0000:07:00.3: rediscovered device fw0
>[337962.848679] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[337962.854036] ata1.00: configured for UDMA/133
>[337962.854267] sd 0:0:0:0: [sda] Starting disk
>[337962.855936] Extended CMOS year: 2000
>[337962.885233] PM: resume of devices complete after 2891.396 msecs
>[337962.885358] PM: Finishing wakeup.
>[337962.885359] Restarting tasks ... done.
>[337962.930191] video LNXVIDEO:00: Restoring backlight state
>[337962.951564] usb 2-1.1: new low-speed USB device number 12 using ehci_hcd
>[337963.017237] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[337963.024343] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[337963.040511] usb 2-1.1: New USB device found, idVendor=413c, idProduct=3012
>[337963.040517] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[337963.040521] usb 2-1.1: Product: Dell USB Optical Mouse
>[337963.040523] usb 2-1.1: Manufacturer: Dell
>[337963.043402] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input13
>[337963.044068] hid-generic 0003:413C:3012.0003: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[337963.149377] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[337963.209220] r8169 0000:09:00.0: p12p1: link down
>[337963.209268] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[337968.640603] wlan0: authenticate with 58:6d:8f:07:37:43
>[337968.687886] wlan0: send auth to 58:6d:8f:07:37:43 (try 1/3)
>[337968.691921] wlan0: authenticated
>[337968.693251] wlan0: associate with 58:6d:8f:07:37:43 (try 1/3)
>[337968.695080] wlan0: RX AssocResp from 58:6d:8f:07:37:43 (capab=0x11 status=0 aid=1)
>[337968.697631] wlan0: associated
>[337968.697690] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[367425.448142] wlan0: deauthenticating from 58:6d:8f:07:37:43 by local choice (reason=3)
>[367425.490180] cfg80211: Calling CRDA to update world regulatory domain
>[367425.584798] cfg80211: World regulatory domain updated:
>[367425.584804] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[367425.584807] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[367425.584809] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[367425.584812] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[367425.584814] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[367425.584816] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[367425.584835] cfg80211: Calling CRDA for country: US
>[367425.588486] cfg80211: Regulatory domain changed to country: US
>[367425.588491] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[367425.588493] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[367425.588495] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[367425.588498] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[367425.588500] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[367425.588502] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[367425.588504] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[367429.163227] PM: Syncing filesystems ... done.
>[367429.723552] PM: Preparing system for mem sleep
>[367430.491347] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[367430.503061] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[367430.513982] PM: Entering mem sleep
>[367430.514139] Suspending console(s) (use no_console_suspend to debug)
>[367430.514528] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[367430.514595] sd 0:0:0:0: [sda] Stopping disk
>[367430.565836] ACPI handle has no context!
>[367432.298558] PM: suspend of devices complete after 1787.753 msecs
>[367432.298768] PM: late suspend of devices complete after 0.207 msecs
>[367432.299002] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[367432.320506] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[367432.353325] PM: noirq suspend of devices complete after 54.655 msecs
>[367432.353540] ACPI: Preparing to enter system sleep state S3
>[367432.356787] PM: Saving platform NVS memory
>[367432.358484] Disabling non-boot CPUs ...
>[367432.358823] Broke affinity for irq 44
>[367432.360041] smpboot: CPU 1 is now offline
>[367432.362001] smpboot: CPU 2 is now offline
>[367432.362690] Broke affinity for irq 23
>[367432.363713] smpboot: CPU 3 is now offline
>[367432.364195] Extended CMOS year: 2000
>[367432.364922] ACPI: Low-level resume complete
>[367432.364981] PM: Restoring platform NVS memory
>[367432.365484] Extended CMOS year: 2000
>[367432.365519] CPU0: Thermal monitoring handled by SMI
>[367432.365746] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[367432.365790] Enabling non-boot CPUs ...
>[367432.365921] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[367432.376946] CPU1: Thermal monitoring handled by SMI
>[367432.380569] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[367432.380582] CPU1 is up
>[367432.380641] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[367432.391665] CPU2: Thermal monitoring handled by SMI
>[367432.394435] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[367432.394439] CPU2 is up
>[367432.394502] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[367432.405525] CPU3: Thermal monitoring handled by SMI
>[367432.408357] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[367432.408361] CPU3 is up
>[367432.411054] ACPI: Waking up from system sleep state S3
>[367432.460434] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[367432.537427] PM: noirq resume of devices complete after 121.167 msecs
>[367432.537582] PM: early resume of devices complete after 0.039 msecs
>[367432.537639] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[367432.537671] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[367432.537681] pci 0000:00:1e.0: setting latency timer to 64
>[367432.537709] ahci 0000:00:1f.2: setting latency timer to 64
>[367432.537723] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[367432.537750] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[367432.537848] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[367432.537934] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[367432.537968] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[367432.538825] mei 0000:00:16.0: wd: failed to find the client
>[367432.539822] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[367432.563165] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[367432.563258] radeon 0000:02:00.0: WB enabled
>[367432.563262] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[367432.609827] [drm] ring test on 0 succeeded in 1 usecs
>[367432.609847] [drm] ib test on ring 0 succeeded in 0 usecs
>[367432.770034] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[367432.843639] ata5: SATA link down (SStatus 0 SControl 300)
>[367432.845635] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[367432.873371] ata2.00: configured for UDMA/100
>[367433.037248] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[367433.088175] firewire_core 0000:07:00.3: rediscovered device fw0
>[367435.340652] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[367435.351348] ata1.00: configured for UDMA/133
>[367435.351525] sd 0:0:0:0: [sda] Starting disk
>[367435.353333] Extended CMOS year: 2000
>[367435.382511] PM: resume of devices complete after 2850.488 msecs
>[367435.382692] PM: Finishing wakeup.
>[367435.382693] Restarting tasks ... done.
>[367435.388613] usb 2-1.1: USB disconnect, device number 12
>[367435.398500] video LNXVIDEO:00: Restoring backlight state
>[367435.776630] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[367435.783778] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[367435.900238] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[367435.958853] r8169 0000:09:00.0: p12p1: link down
>[367435.958908] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[367441.514691] wlan0: authenticate with 20:cf:30:c6:2e:84
>[367441.569751] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[367441.571644] wlan0: authenticated
>[367441.572523] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[367441.575812] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[367441.577848] wlan0: associated
>[367441.577880] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[374747.897742] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[374747.958698] cfg80211: Calling CRDA to update world regulatory domain
>[374747.986542] cfg80211: World regulatory domain updated:
>[374747.986548] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[374747.986552] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[374747.986554] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[374747.986556] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[374747.986558] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[374747.986560] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[374747.986906] cfg80211: Calling CRDA for country: US
>[374747.990711] cfg80211: Regulatory domain changed to country: US
>[374747.990715] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[374747.990718] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[374747.990720] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[374747.990723] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[374747.990725] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[374747.990727] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[374747.990729] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[374749.589657] PM: Syncing filesystems ... done.
>[374749.868534] PM: Preparing system for mem sleep
>[374750.550087] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[374750.561794] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[374750.572717] PM: Entering mem sleep
>[374750.572812] Suspending console(s) (use no_console_suspend to debug)
>[374750.573168] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[374750.573241] sd 0:0:0:0: [sda] Stopping disk
>[374750.773343] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[374750.821259] ACPI handle has no context!
>[374752.585768] PM: suspend of devices complete after 2016.732 msecs
>[374752.585937] PM: late suspend of devices complete after 0.166 msecs
>[374752.586166] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[374752.607825] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[374752.640641] PM: noirq suspend of devices complete after 54.804 msecs
>[374752.640870] ACPI: Preparing to enter system sleep state S3
>[374752.644104] PM: Saving platform NVS memory
>[374752.645846] Disabling non-boot CPUs ...
>[374752.646182] Broke affinity for irq 44
>[374752.647400] smpboot: CPU 1 is now offline
>[374752.649404] smpboot: CPU 2 is now offline
>[374752.650257] Broke affinity for irq 23
>[374752.651280] smpboot: CPU 3 is now offline
>[374752.651795] Extended CMOS year: 2000
>[374752.652522] ACPI: Low-level resume complete
>[374752.652582] PM: Restoring platform NVS memory
>[374752.653087] Extended CMOS year: 2000
>[374752.653122] CPU0: Thermal monitoring handled by SMI
>[374752.653350] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[374752.653383] Enabling non-boot CPUs ...
>[374752.653511] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[374752.664553] CPU1: Thermal monitoring handled by SMI
>[374752.668221] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[374752.668226] CPU1 is up
>[374752.668285] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[374752.679317] CPU2: Thermal monitoring handled by SMI
>[374752.682102] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[374752.682106] CPU2 is up
>[374752.682159] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[374752.693181] CPU3: Thermal monitoring handled by SMI
>[374752.696028] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[374752.696033] CPU3 is up
>[374752.698750] ACPI: Waking up from system sleep state S3
>[374752.748752] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[374752.825735] PM: noirq resume of devices complete after 121.158 msecs
>[374752.825890] PM: early resume of devices complete after 0.039 msecs
>[374752.825946] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[374752.825981] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[374752.825989] pci 0000:00:1e.0: setting latency timer to 64
>[374752.826014] ahci 0000:00:1f.2: setting latency timer to 64
>[374752.826039] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[374752.826076] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[374752.826199] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[374752.826249] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[374752.826288] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[374752.828049] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[374752.851947] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[374752.852045] radeon 0000:02:00.0: WB enabled
>[374752.852049] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[374752.857933] mei 0000:00:16.0: wd: failed to find the client
>[374752.898569] [drm] ring test on 0 succeeded in 1 usecs
>[374752.898589] [drm] ib test on ring 0 succeeded in 0 usecs
>[374753.057237] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[374753.129961] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[374753.131965] ata5: SATA link down (SStatus 0 SControl 300)
>[374753.157692] ata2.00: configured for UDMA/100
>[374753.325528] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[374753.376446] firewire_core 0000:07:00.3: rediscovered device fw0
>[374755.628175] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[374755.638681] ata1.00: configured for UDMA/133
>[374755.638835] sd 0:0:0:0: [sda] Starting disk
>[374755.640803] Extended CMOS year: 2000
>[374755.661455] PM: resume of devices complete after 2841.086 msecs
>[374755.661586] PM: Finishing wakeup.
>[374755.661587] Restarting tasks ... done.
>[374755.712580] video LNXVIDEO:00: Restoring backlight state
>[374755.806645] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[374755.814009] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[374755.922771] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[374755.981695] r8169 0000:09:00.0: p12p1: link down
>[374755.981888] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[374761.340149] wlan0: authenticate with 20:cf:30:c6:2e:84
>[374761.360262] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[374761.362187] wlan0: authenticated
>[374761.362893] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[374761.370138] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[374761.374253] wlan0: associated
>[374761.374306] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[377448.013179] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[377448.050692] cfg80211: Calling CRDA to update world regulatory domain
>[377448.086311] cfg80211: World regulatory domain updated:
>[377448.086316] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[377448.086318] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[377448.086321] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[377448.086323] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[377448.086325] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[377448.086327] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[377448.086346] cfg80211: Calling CRDA for country: US
>[377448.094201] cfg80211: Regulatory domain changed to country: US
>[377448.094206] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[377448.094209] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[377448.094211] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[377448.094213] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[377448.094215] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[377448.094216] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[377448.094218] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[377449.606314] PM: Syncing filesystems ... done.
>[377449.614689] PM: Preparing system for mem sleep
>[377450.300692] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[377450.312395] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[377450.323330] PM: Entering mem sleep
>[377450.323428] Suspending console(s) (use no_console_suspend to debug)
>[377450.323784] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[377450.323874] sd 0:0:0:0: [sda] Stopping disk
>[377450.325830] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[377450.373197] ACPI handle has no context!
>[377452.069897] PM: suspend of devices complete after 1749.722 msecs
>[377452.070069] PM: late suspend of devices complete after 0.170 msecs
>[377452.070276] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[377452.091949] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[377452.124764] PM: noirq suspend of devices complete after 54.798 msecs
>[377452.124947] ACPI: Preparing to enter system sleep state S3
>[377452.128229] PM: Saving platform NVS memory
>[377452.129950] Disabling non-boot CPUs ...
>[377452.130287] Broke affinity for irq 44
>[377452.131531] smpboot: CPU 1 is now offline
>[377452.133484] smpboot: CPU 2 is now offline
>[377452.134215] Broke affinity for irq 23
>[377452.135238] smpboot: CPU 3 is now offline
>[377452.135738] Extended CMOS year: 2000
>[377452.136465] ACPI: Low-level resume complete
>[377452.136526] PM: Restoring platform NVS memory
>[377452.137021] Extended CMOS year: 2000
>[377452.137055] CPU0: Thermal monitoring handled by SMI
>[377452.137293] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[377452.137327] Enabling non-boot CPUs ...
>[377452.137457] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[377452.148482] CPU1: Thermal monitoring handled by SMI
>[377452.152088] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[377452.152101] CPU1 is up
>[377452.152161] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[377452.163184] CPU2: Thermal monitoring handled by SMI
>[377452.165960] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[377452.165965] CPU2 is up
>[377452.166020] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[377452.177043] CPU3: Thermal monitoring handled by SMI
>[377452.179881] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[377452.179885] CPU3 is up
>[377452.182595] ACPI: Waking up from system sleep state S3
>[377452.232862] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[377452.309852] PM: noirq resume of devices complete after 121.155 msecs
>[377452.310007] PM: early resume of devices complete after 0.039 msecs
>[377452.310065] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[377452.310107] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[377452.310110] pci 0000:00:1e.0: setting latency timer to 64
>[377452.310122] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[377452.310133] ahci 0000:00:1f.2: setting latency timer to 64
>[377452.310169] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[377452.310363] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[377452.310389] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[377452.310456] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[377452.311133] mei 0000:00:16.0: wd: failed to find the client
>[377452.312251] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[377452.333684] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[377452.333776] radeon 0000:02:00.0: WB enabled
>[377452.333779] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[377452.380344] [drm] ring test on 0 succeeded in 1 usecs
>[377452.380366] [drm] ib test on ring 0 succeeded in 0 usecs
>[377452.542452] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[377452.616084] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[377452.618081] ata5: SATA link down (SStatus 0 SControl 300)
>[377452.643841] ata2.00: configured for UDMA/100
>[377452.809665] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[377452.860596] firewire_core 0000:07:00.3: rediscovered device fw0
>[377455.108255] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[377455.116665] ata1.00: configured for UDMA/133
>[377455.116808] sd 0:0:0:0: [sda] Starting disk
>[377455.118621] Extended CMOS year: 2000
>[377455.139515] PM: resume of devices complete after 2835.015 msecs
>[377455.139645] PM: Finishing wakeup.
>[377455.139646] Restarting tasks ... done.
>[377455.191140] video LNXVIDEO:00: Restoring backlight state
>[377455.209131] usb 2-1.1: new low-speed USB device number 13 using ehci_hcd
>[377455.298218] usb 2-1.1: New USB device found, idVendor=413c, idProduct=3012
>[377455.298225] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[377455.298228] usb 2-1.1: Product: Dell USB Optical Mouse
>[377455.298230] usb 2-1.1: Manufacturer: Dell
>[377455.301179] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input14
>[377455.302412] hid-generic 0003:413C:3012.0004: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[377455.309406] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[377455.316408] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[377455.430719] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[377455.489789] r8169 0000:09:00.0: p12p1: link down
>[377455.489835] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[377460.798975] wlan0: authenticate with 58:6d:8f:07:37:43
>[377460.838702] wlan0: send auth to 58:6d:8f:07:37:43 (try 1/3)
>[377461.038704] wlan0: send auth to 58:6d:8f:07:37:43 (try 2/3)
>[377461.039704] wlan0: authenticated
>[377461.040646] wlan0: associate with 58:6d:8f:07:37:43 (try 1/3)
>[377461.041814] wlan0: RX AssocResp from 58:6d:8f:07:37:43 (capab=0x11 status=0 aid=1)
>[377461.044580] wlan0: associated
>[377461.044650] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[409270.189959] usb 2-1.1: USB disconnect, device number 13
>[410343.971091] wlan0: deauthenticating from 58:6d:8f:07:37:43 by local choice (reason=3)
>[410344.016649] cfg80211: Calling CRDA to update world regulatory domain
>[410345.462016] cfg80211: World regulatory domain updated:
>[410345.462020] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[410345.462022] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[410345.462024] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[410345.462025] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[410345.462027] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[410345.462028] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[410345.462261] cfg80211: Calling CRDA for country: US
>[410345.464377] cfg80211: Regulatory domain changed to country: US
>[410345.464379] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[410345.464381] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[410345.464383] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[410345.464384] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[410345.464385] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[410345.464387] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[410345.464388] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[410348.841477] PM: Syncing filesystems ... done.
>[410349.474120] PM: Preparing system for mem sleep
>[410350.224442] Freezing user space processes ... (elapsed 0.05 seconds) done.
>[410350.279423] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[410350.290366] PM: Entering mem sleep
>[410350.290520] Suspending console(s) (use no_console_suspend to debug)
>[410350.290920] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[410350.290979] sd 0:0:0:0: [sda] Stopping disk
>[410350.339248] ACPI handle has no context!
>[410352.095824] PM: suspend of devices complete after 1808.683 msecs
>[410352.096009] PM: late suspend of devices complete after 0.181 msecs
>[410352.096238] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[410352.117866] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[410352.150681] PM: noirq suspend of devices complete after 54.776 msecs
>[410352.150887] ACPI: Preparing to enter system sleep state S3
>[410352.154132] PM: Saving platform NVS memory
>[410352.155868] Disabling non-boot CPUs ...
>[410352.156191] Broke affinity for irq 44
>[410352.157427] smpboot: CPU 1 is now offline
>[410352.159382] smpboot: CPU 2 is now offline
>[410352.160099] Broke affinity for irq 23
>[410352.161122] smpboot: CPU 3 is now offline
>[410352.161629] Extended CMOS year: 2000
>[410352.162353] ACPI: Low-level resume complete
>[410352.162413] PM: Restoring platform NVS memory
>[410352.162917] Extended CMOS year: 2000
>[410352.162953] CPU0: Thermal monitoring handled by SMI
>[410352.163178] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[410352.163213] Enabling non-boot CPUs ...
>[410352.163345] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[410352.174376] CPU1: Thermal monitoring handled by SMI
>[410352.177983] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[410352.177996] CPU1 is up
>[410352.178056] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[410352.189080] CPU2: Thermal monitoring handled by SMI
>[410352.191853] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[410352.191857] CPU2 is up
>[410352.191913] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[410352.202936] CPU3: Thermal monitoring handled by SMI
>[410352.205775] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[410352.205780] CPU3 is up
>[410352.208460] ACPI: Waking up from system sleep state S3
>[410352.257777] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[410352.334769] PM: noirq resume of devices complete after 121.163 msecs
>[410352.334924] PM: early resume of devices complete after 0.039 msecs
>[410352.334976] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[410352.335018] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[410352.335020] pci 0000:00:1e.0: setting latency timer to 64
>[410352.335048] ahci 0000:00:1f.2: setting latency timer to 64
>[410352.335066] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[410352.335096] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[410352.335184] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[410352.335234] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[410352.335276] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[410352.336223] mei 0000:00:16.0: wd: failed to find the client
>[410352.337154] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[410352.359778] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[410352.359870] radeon 0000:02:00.0: WB enabled
>[410352.359874] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[410352.406436] [drm] ring test on 0 succeeded in 1 usecs
>[410352.406457] [drm] ib test on ring 0 succeeded in 0 usecs
>[410352.566274] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[410352.640992] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[410352.642981] ata5: SATA link down (SStatus 0 SControl 300)
>[410352.668575] ata2.00: configured for UDMA/100
>[410352.834598] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[410352.886494] firewire_core 0000:07:00.3: rediscovered device fw0
>[410355.133140] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[410355.146174] ata1.00: configured for UDMA/133
>[410355.146349] sd 0:0:0:0: [sda] Starting disk
>[410355.148378] Extended CMOS year: 2000
>[410355.169111] PM: resume of devices complete after 2839.724 msecs
>[410355.169237] PM: Finishing wakeup.
>[410355.169238] Restarting tasks ... done.
>[410355.196226] video LNXVIDEO:00: Restoring backlight state
>[410356.281450] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[410356.288431] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[410356.435237] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[410356.494765] r8169 0000:09:00.0: p12p1: link down
>[410356.494809] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[410361.923639] wlan0: authenticate with 20:cf:30:c6:2e:84
>[410361.986576] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[410361.988480] wlan0: authenticated
>[410361.989696] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[410361.993025] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[410361.996721] wlan0: associated
>[410361.996770] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[414083.774908] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[414083.815077] cfg80211: Calling CRDA to update world regulatory domain
>[414083.827575] cfg80211: World regulatory domain updated:
>[414083.827581] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[414083.827583] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[414083.827585] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[414083.827587] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[414083.827590] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[414083.827592] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[414083.827618] cfg80211: Calling CRDA for country: US
>[414083.832357] cfg80211: Regulatory domain changed to country: US
>[414083.832362] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[414083.832365] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[414083.832367] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[414083.832369] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[414083.832372] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[414083.832374] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[414083.832376] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[414085.287456] PM: Syncing filesystems ... done.
>[414085.503396] PM: Preparing system for mem sleep
>[414086.180589] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[414086.192156] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[414086.203167] PM: Entering mem sleep
>[414086.203261] Suspending console(s) (use no_console_suspend to debug)
>[414086.203664] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[414086.203787] sd 0:0:0:0: [sda] Stopping disk
>[414086.250026] ACPI handle has no context!
>[414087.813973] PM: suspend of devices complete after 1613.734 msecs
>[414087.814143] PM: late suspend of devices complete after 0.167 msecs
>[414087.814351] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[414087.836005] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[414087.868818] PM: noirq suspend of devices complete after 54.775 msecs
>[414087.868987] ACPI: Preparing to enter system sleep state S3
>[414087.872279] PM: Saving platform NVS memory
>[414087.874003] Disabling non-boot CPUs ...
>[414087.874341] Broke affinity for irq 44
>[414087.875543] smpboot: CPU 1 is now offline
>[414087.877360] smpboot: CPU 2 is now offline
>[414087.878033] Broke affinity for irq 23
>[414087.879061] smpboot: CPU 3 is now offline
>[414087.879715] Extended CMOS year: 2000
>[414087.880447] ACPI: Low-level resume complete
>[414087.880507] PM: Restoring platform NVS memory
>[414087.881012] Extended CMOS year: 2000
>[414087.881047] CPU0: Thermal monitoring handled by SMI
>[414087.881282] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[414087.881307] Enabling non-boot CPUs ...
>[414087.881452] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[414087.892476] CPU1: Thermal monitoring handled by SMI
>[414087.896082] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[414087.896095] CPU1 is up
>[414087.896157] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[414087.907180] CPU2: Thermal monitoring handled by SMI
>[414087.909983] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[414087.910002] CPU2 is up
>[414087.910056] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[414087.921079] CPU3: Thermal monitoring handled by SMI
>[414087.923905] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[414087.923910] CPU3 is up
>[414087.926608] ACPI: Waking up from system sleep state S3
>[414087.975928] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[414088.052920] PM: noirq resume of devices complete after 121.157 msecs
>[414088.053076] PM: early resume of devices complete after 0.039 msecs
>[414088.053135] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[414088.053182] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[414088.053205] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[414088.053209] pci 0000:00:1e.0: setting latency timer to 64
>[414088.053228] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[414088.053231] ahci 0000:00:1f.2: setting latency timer to 64
>[414088.053373] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[414088.053422] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[414088.053425] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[414088.054352] mei 0000:00:16.0: wd: failed to find the client
>[414088.055345] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[414088.077227] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[414088.077323] radeon 0000:02:00.0: WB enabled
>[414088.077326] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[414088.123894] [drm] ring test on 0 succeeded in 1 usecs
>[414088.123915] [drm] ib test on ring 0 succeeded in 0 usecs
>[414088.284436] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[414088.359147] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[414088.361129] ata5: SATA link down (SStatus 0 SControl 300)
>[414088.386857] ata2.00: configured for UDMA/100
>[414088.552757] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[414088.757982] firewire_core 0000:07:00.3: rediscovered device fw0
>[414090.851248] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[414090.861194] ata1.00: configured for UDMA/133
>[414090.861385] sd 0:0:0:0: [sda] Starting disk
>[414090.863330] Extended CMOS year: 2000
>[414090.883850] PM: resume of devices complete after 2836.334 msecs
>[414090.883980] PM: Finishing wakeup.
>[414090.883981] Restarting tasks ... done.
>[414090.971771] video LNXVIDEO:00: Restoring backlight state
>[414091.098532] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[414091.106104] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[414091.217998] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[414091.277097] r8169 0000:09:00.0: p12p1: link down
>[414091.277154] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[414096.559739] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414096.586531] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414096.786522] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[414096.987129] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[414097.187729] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[414099.920132] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414099.930078] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414100.129966] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[414100.330570] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[414100.531225] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[414103.243876] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414103.254769] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414103.455500] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[414103.656105] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[414103.856695] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[414106.611482] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414106.621307] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414106.821906] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[414107.022549] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[414107.223120] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[414109.995571] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414110.007365] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414110.207261] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[414110.407886] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[414110.608474] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[414113.358864] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414113.369446] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414113.569715] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[414113.770270] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[414113.970918] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[414116.741753] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414116.752223] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414116.798733] wlan0: authenticated
>[414116.799369] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[414116.999947] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[414117.200552] wlan0: associate with 20:cf:30:c6:2e:84 (try 3/3)
>[414117.401159] wlan0: association with 20:cf:30:c6:2e:84 timed out
>[414118.901062] r8169 0000:09:00.0: p12p1: link up
>[414118.901081] IPv6: ADDRCONF(NETDEV_CHANGE): p12p1: link becomes ready
>[414128.093851] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414128.104487] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414128.303959] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[414128.503663] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[414128.703388] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[414131.448100] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414131.458765] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414131.657786] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[414131.857591] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[414132.057273] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[414134.840926] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414134.851419] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414135.051078] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[414135.250863] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[414135.450670] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[414138.214253] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414138.224654] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414138.424252] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[414138.624074] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[414138.823947] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[414141.579674] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414141.591886] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414141.791115] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[414141.990995] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[414142.190889] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[414144.920695] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414144.940727] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414145.139750] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[414145.339670] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[414145.539596] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[414161.014488] wlan0: authenticate with 20:cf:30:c6:2e:84
>[414161.025049] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[414161.027474] wlan0: authenticated
>[414161.028463] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[414161.031786] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[414161.034938] wlan0: associated
>[414161.034999] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[428789.777168] r8169 0000:09:00.0: p12p1: link down
>[428796.945624] r8169 0000:09:00.0: p12p1: link up
>[428796.991461] usb 2-1.2: new high-speed USB device number 14 using ehci_hcd
>[428797.079939] usb 2-1.2: New USB device found, idVendor=0781, idProduct=74d1
>[428797.079948] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[428797.079953] usb 2-1.2: Product: Rockbox media player
>[428797.079958] usb 2-1.2: Manufacturer: Rockbox.org
>[428797.079963] usb 2-1.2: SerialNumber: 1A8C287061203087900000000
>[428797.116126] scsi10 : usb-storage 2-1.2:1.0
>[428798.116383] scsi 10:0:0:0: Direct-Access     Rockbox  Internal Storage 0.00 PQ: 0 ANSI: 4
>[428798.116960] scsi 10:0:0:1: Direct-Access     Rockbox  SD Card Slot     0.00 PQ: 0 ANSI: 4
>[428798.119041] sd 10:0:0:0: [sdb] 7683072 512-byte logical blocks: (3.93 GB/3.66 GiB)
>[428798.119655] sd 10:0:0:0: [sdb] Write Protect is off
>[428798.119665] sd 10:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[428798.119752] sd 10:0:0:0: Attached scsi generic sg2 type 0
>[428798.120328] sd 10:0:0:0: [sdb] No Caching mode page present
>[428798.120338] sd 10:0:0:0: [sdb] Assuming drive cache: write through
>[428798.120590] sd 10:0:0:1: Attached scsi generic sg3 type 0
>[428798.124897] sd 10:0:0:1: [sdc] Attached SCSI removable disk
>[428798.125400] sd 10:0:0:0: [sdb] No Caching mode page present
>[428798.125409] sd 10:0:0:0: [sdb] Assuming drive cache: write through
>[428798.127655]  sdb:
>[428798.130138] sd 10:0:0:0: [sdb] No Caching mode page present
>[428798.130147] sd 10:0:0:0: [sdb] Assuming drive cache: write through
>[428798.130154] sd 10:0:0:0: [sdb] Attached SCSI removable disk
>[428798.763971] SELinux: initialized (dev sdb, type vfat), uses genfs_contexts
>[429431.218128] sdb: detected capacity change from 3933732864 to 0
>[429434.875686] usb 2-1.2: USB disconnect, device number 14
>[429435.172331] r8169 0000:09:00.0: p12p1: link down
>[429479.653259] usb 2-1.2: new high-speed USB device number 15 using ehci_hcd
>[429479.743329] usb 2-1.2: New USB device found, idVendor=0781, idProduct=74d1
>[429479.743340] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[429479.743348] usb 2-1.2: Product: Rockbox media player
>[429479.743354] usb 2-1.2: Manufacturer: Rockbox.org
>[429479.743360] usb 2-1.2: SerialNumber: 1A8C287061203087900000000
>[429479.993786] scsi11 : usb-storage 2-1.2:1.0
>[429480.993228] scsi 11:0:0:0: Direct-Access     Rockbox  Internal Storage 0.00 PQ: 0 ANSI: 4
>[429480.993787] scsi 11:0:0:1: Direct-Access     Rockbox  SD Card Slot     0.00 PQ: 0 ANSI: 4
>[429480.995584] sd 11:0:0:0: Attached scsi generic sg2 type 0
>[429480.995799] sd 11:0:0:0: [sdb] 7683072 512-byte logical blocks: (3.93 GB/3.66 GiB)
>[429480.996313] sd 11:0:0:0: [sdb] Write Protect is off
>[429480.996324] sd 11:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[429480.996442] sd 11:0:0:1: Attached scsi generic sg3 type 0
>[429480.997538] sd 11:0:0:0: [sdb] No Caching mode page present
>[429480.997547] sd 11:0:0:0: [sdb] Assuming drive cache: write through
>[429481.001201] sd 11:0:0:1: [sdc] Attached SCSI removable disk
>[429481.002535] sd 11:0:0:0: [sdb] No Caching mode page present
>[429481.002545] sd 11:0:0:0: [sdb] Assuming drive cache: write through
>[429481.004787]  sdb:
>[429481.008148] sd 11:0:0:0: [sdb] No Caching mode page present
>[429481.008159] sd 11:0:0:0: [sdb] Assuming drive cache: write through
>[429481.008166] sd 11:0:0:0: [sdb] Attached SCSI removable disk
>[429481.378750] SELinux: initialized (dev sdb, type vfat), uses genfs_contexts
>[429504.023860] sdb: detected capacity change from 3933732864 to 0
>[429506.738975] usb 2-1.2: USB disconnect, device number 15
>[429524.727374] usb 2-1.2: new high-speed USB device number 16 using ehci_hcd
>[429524.816010] usb 2-1.2: New USB device found, idVendor=0781, idProduct=74d1
>[429524.816019] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[429524.816024] usb 2-1.2: Product: Rockbox media player
>[429524.816029] usb 2-1.2: Manufacturer: Rockbox.org
>[429524.816033] usb 2-1.2: SerialNumber: 2A8C287061203087900000000
>[435724.888900] usb 2-1.2: USB disconnect, device number 16
>[439518.092485] usb 2-1.2: new high-speed USB device number 17 using ehci_hcd
>[439518.190460] usb 2-1.2: New USB device found, idVendor=0930, idProduct=6532
>[439518.190468] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=3
>[439518.190473] usb 2-1.2: Product: USB Flash Memory
>[439518.190478] usb 2-1.2: SerialNumber: 0EF0CB5093811AC2
>[439518.192138] scsi12 : usb-storage 2-1.2:1.0
>[439519.192066] scsi 12:0:0:0: Direct-Access              USB Flash Memory 1.04 PQ: 0 ANSI: 0 CCS
>[439519.193466] sd 12:0:0:0: Attached scsi generic sg2 type 0
>[439519.982409] sd 12:0:0:0: [sdb] 499712 512-byte logical blocks: (255 MB/244 MiB)
>[439519.983173] sd 12:0:0:0: [sdb] Write Protect is off
>[439519.983182] sd 12:0:0:0: [sdb] Mode Sense: 23 00 00 00
>[439519.983838] sd 12:0:0:0: [sdb] No Caching mode page present
>[439519.983847] sd 12:0:0:0: [sdb] Assuming drive cache: write through
>[439519.987699] sd 12:0:0:0: [sdb] No Caching mode page present
>[439519.987709] sd 12:0:0:0: [sdb] Assuming drive cache: write through
>[439519.988569]  sdb: sdb1
>[439519.990766] sd 12:0:0:0: [sdb] No Caching mode page present
>[439519.990770] sd 12:0:0:0: [sdb] Assuming drive cache: write through
>[439519.990774] sd 12:0:0:0: [sdb] Attached SCSI removable disk
>[439520.419908] SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
>[439564.050955] sdb: detected capacity change from 255852544 to 0
>[439567.680543] usb 2-1.2: USB disconnect, device number 17
>[441563.755349] ISO 9660 Extensions: Microsoft Joliet Level 3
>[441563.761439] ISO 9660 Extensions: IEEE_1282
>[441563.761470] SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>[442480.329628] ISO 9660 Extensions: Microsoft Joliet Level 3
>[442480.337756] ISO 9660 Extensions: IEEE_1282
>[442480.337779] SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>[456977.045880] ISO 9660 Extensions: Microsoft Joliet Level 3
>[456977.052004] ISO 9660 Extensions: IEEE_1282
>[456977.052026] SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>[469834.991719] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[469835.043343] cfg80211: Calling CRDA to update world regulatory domain
>[469835.553178] cfg80211: World regulatory domain updated:
>[469835.553184] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[469835.553186] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[469835.553187] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[469835.553189] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[469835.553190] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[469835.553192] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[469835.553205] cfg80211: Calling CRDA for country: US
>[469835.555959] cfg80211: Regulatory domain changed to country: US
>[469835.555962] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[469835.555964] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[469835.555966] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[469835.555967] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[469835.555969] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[469835.555970] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[469835.555972] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[469838.365785] PM: Syncing filesystems ... done.
>[469838.367166] PM: Preparing system for mem sleep
>[469839.357081] Freezing user space processes ... (elapsed 0.06 seconds) done.
>[469839.423781] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[469839.434718] PM: Entering mem sleep
>[469839.434816] Suspending console(s) (use no_console_suspend to debug)
>[469839.435182] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[469839.435230] sd 0:0:0:0: [sda] Stopping disk
>[469839.437167] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[469839.482600] ACPI handle has no context!
>[469841.295126] PM: suspend of devices complete after 1863.788 msecs
>[469841.295334] PM: late suspend of devices complete after 0.205 msecs
>[469841.295567] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[469841.317133] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[469841.349953] PM: noirq suspend of devices complete after 54.722 msecs
>[469841.350194] ACPI: Preparing to enter system sleep state S3
>[469841.353406] PM: Saving platform NVS memory
>[469841.355134] Disabling non-boot CPUs ...
>[469841.355469] Broke affinity for irq 44
>[469841.356676] smpboot: CPU 1 is now offline
>[469841.358506] smpboot: CPU 2 is now offline
>[469841.359195] Broke affinity for irq 23
>[469841.360217] smpboot: CPU 3 is now offline
>[469841.360876] Extended CMOS year: 2000
>[469841.361607] ACPI: Low-level resume complete
>[469841.361667] PM: Restoring platform NVS memory
>[469841.362173] Extended CMOS year: 2000
>[469841.362209] CPU0: Thermal monitoring handled by SMI
>[469841.362434] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[469841.362468] Enabling non-boot CPUs ...
>[469841.362595] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[469841.373620] CPU1: Thermal monitoring handled by SMI
>[469841.377219] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[469841.377232] CPU1 is up
>[469841.377291] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[469841.388322] CPU2: Thermal monitoring handled by SMI
>[469841.391106] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[469841.391111] CPU2 is up
>[469841.391167] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[469841.402189] CPU3: Thermal monitoring handled by SMI
>[469841.405022] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[469841.405027] CPU3 is up
>[469841.407722] ACPI: Waking up from system sleep state S3
>[469841.457053] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[469841.534044] PM: noirq resume of devices complete after 121.155 msecs
>[469841.534199] PM: early resume of devices complete after 0.039 msecs
>[469841.534258] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[469841.534309] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[469841.534324] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[469841.534333] pci 0000:00:1e.0: setting latency timer to 64
>[469841.534348] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[469841.534354] ahci 0000:00:1f.2: setting latency timer to 64
>[469841.534532] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[469841.534566] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[469841.534623] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[469841.535368] mei 0000:00:16.0: wd: failed to find the client
>[469841.536513] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[469841.558945] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[469841.559039] radeon 0000:02:00.0: WB enabled
>[469841.559043] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[469841.605628] [drm] ring test on 0 succeeded in 1 usecs
>[469841.605683] [drm] ib test on ring 0 succeeded in 0 usecs
>[469841.769623] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[469841.838304] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[469841.842272] ata5: SATA link down (SStatus 0 SControl 300)
>[469841.865626] ata2.00: configured for UDMA/100
>[469842.033890] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[469842.240146] firewire_core 0000:07:00.3: rediscovered device fw0
>[469844.334427] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[469844.347669] ata1.00: configured for UDMA/133
>[469844.347840] sd 0:0:0:0: [sda] Starting disk
>[469844.370370] PM: resume of devices complete after 2841.691 msecs
>[469844.370501] PM: Finishing wakeup.
>[469844.370502] Restarting tasks ... done.
>[469844.398052] video LNXVIDEO:00: Restoring backlight state
>[469845.550038] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[469845.557013] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[469845.669274] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[469845.837825] r8169 0000:09:00.0: p12p1: link down
>[469845.837871] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[469851.578806] wlan0: authenticate with 20:cf:30:c6:2e:84
>[469851.613297] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[469851.616266] wlan0: authenticated
>[469851.617187] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[469851.620493] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[469851.623734] wlan0: associated
>[469851.623780] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[484020.182997] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[484020.223230] cfg80211: Calling CRDA to update world regulatory domain
>[484021.191250] cfg80211: World regulatory domain updated:
>[484021.191253] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[484021.191255] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[484021.191257] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[484021.191259] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[484021.191260] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[484021.191261] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[484021.191273] cfg80211: Calling CRDA for country: US
>[484021.193818] cfg80211: Regulatory domain changed to country: US
>[484021.193821] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[484021.193823] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[484021.193824] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[484021.193826] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[484021.193827] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[484021.193829] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[484021.193830] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[484023.555296] PM: Syncing filesystems ... done.
>[484023.560428] PM: Preparing system for mem sleep
>[484024.273096] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[484024.284336] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[484024.295212] PM: Entering mem sleep
>[484024.295310] Suspending console(s) (use no_console_suspend to debug)
>[484024.295739] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[484024.295851] sd 0:0:0:0: [sda] Stopping disk
>[484024.342124] ACPI handle has no context!
>[484026.278344] PM: suspend of devices complete after 1986.745 msecs
>[484026.278524] PM: late suspend of devices complete after 0.177 msecs
>[484026.278749] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[484026.300380] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[484026.333172] PM: noirq suspend of devices complete after 54.752 msecs
>[484026.333375] ACPI: Preparing to enter system sleep state S3
>[484026.336641] PM: Saving platform NVS memory
>[484026.338400] Disabling non-boot CPUs ...
>[484026.338732] Broke affinity for irq 44
>[484026.339957] smpboot: CPU 1 is now offline
>[484026.341861] smpboot: CPU 2 is now offline
>[484026.342506] Broke affinity for irq 23
>[484026.343530] smpboot: CPU 3 is now offline
>[484026.343973] Extended CMOS year: 2000
>[484026.344698] ACPI: Low-level resume complete
>[484026.344759] PM: Restoring platform NVS memory
>[484026.345260] Extended CMOS year: 2000
>[484026.345295] CPU0: Thermal monitoring handled by SMI
>[484026.345519] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[484026.345563] Enabling non-boot CPUs ...
>[484026.345693] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[484026.356718] CPU1: Thermal monitoring handled by SMI
>[484026.360317] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[484026.360330] CPU1 is up
>[484026.360392] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[484026.371416] CPU2: Thermal monitoring handled by SMI
>[484026.374200] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[484026.374205] CPU2 is up
>[484026.374265] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[484026.385289] CPU3: Thermal monitoring handled by SMI
>[484026.388124] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[484026.388129] CPU3 is up
>[484026.390840] ACPI: Waking up from system sleep state S3
>[484026.440275] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[484026.517267] PM: noirq resume of devices complete after 121.157 msecs
>[484026.517421] PM: early resume of devices complete after 0.039 msecs
>[484026.517477] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[484026.517530] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[484026.517554] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[484026.517558] pci 0000:00:1e.0: setting latency timer to 64
>[484026.517586] ahci 0000:00:1f.2: setting latency timer to 64
>[484026.517593] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[484026.517720] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[484026.517758] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[484026.517759] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[484026.518730] mei 0000:00:16.0: wd: failed to find the client
>[484026.519900] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[484026.542317] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[484026.542410] radeon 0000:02:00.0: WB enabled
>[484026.542413] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[484026.588977] [drm] ring test on 0 succeeded in 1 usecs
>[484026.588997] [drm] ib test on ring 0 succeeded in 0 usecs
>[484026.748855] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[484026.823493] ata5: SATA link down (SStatus 0 SControl 300)
>[484026.825488] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[484026.855427] ata2.00: configured for UDMA/100
>[484027.017098] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[484027.069025] firewire_core 0000:07:00.3: rediscovered device fw0
>[484029.315669] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[484029.320993] ata1.00: configured for UDMA/133
>[484029.321184] sd 0:0:0:0: [sda] Starting disk
>[484029.323142] Extended CMOS year: 2000
>[484029.343850] PM: resume of devices complete after 2831.928 msecs
>[484029.343975] PM: Finishing wakeup.
>[484029.343977] Restarting tasks ... done.
>[484029.380398] video LNXVIDEO:00: Restoring backlight state
>[484029.765186] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[484029.772500] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[484029.890306] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[484029.949736] r8169 0000:09:00.0: p12p1: link down
>[484029.949822] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[484035.256217] wlan0: authenticate with 20:cf:30:c6:2e:84
>[484035.276392] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[484035.278293] wlan0: authenticated
>[484035.279015] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[484035.285654] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[484035.288748] wlan0: associated
>[484035.288799] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[503299.376517] usb 2-1.2: new high-speed USB device number 18 using ehci_hcd
>[503299.464707] usb 2-1.2: New USB device found, idVendor=0781, idProduct=74d1
>[503299.464713] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[503299.464717] usb 2-1.2: Product: Rockbox media player
>[503299.464720] usb 2-1.2: Manufacturer: Rockbox.org
>[503299.464723] usb 2-1.2: SerialNumber: 2A8C287061203087900000000
>[504843.340080] usb 2-1.2: USB disconnect, device number 18
>[504846.072204] usb 2-1.2: new high-speed USB device number 19 using ehci_hcd
>[504846.162165] usb 2-1.2: New USB device found, idVendor=0781, idProduct=74d1
>[504846.162172] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[504846.162178] usb 2-1.2: Product: Rockbox media player
>[504846.162183] usb 2-1.2: Manufacturer: Rockbox.org
>[504846.162187] usb 2-1.2: SerialNumber: 1A8C287061203087900000000
>[504846.203287] scsi13 : usb-storage 2-1.2:1.0
>[504847.203058] scsi 13:0:0:0: Direct-Access     Rockbox  Internal Storage 0.00 PQ: 0 ANSI: 4
>[504847.203775] scsi 13:0:0:1: Direct-Access     Rockbox  SD Card Slot     0.00 PQ: 0 ANSI: 4
>[504847.206094] sd 13:0:0:0: Attached scsi generic sg2 type 0
>[504847.206250] sd 13:0:0:0: [sdb] 7683072 512-byte logical blocks: (3.93 GB/3.66 GiB)
>[504847.206881] sd 13:0:0:0: [sdb] Write Protect is off
>[504847.206889] sd 13:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[504847.207028] sd 13:0:0:1: Attached scsi generic sg3 type 0
>[504847.207968] sd 13:0:0:0: [sdb] No Caching mode page present
>[504847.207976] sd 13:0:0:0: [sdb] Assuming drive cache: write through
>[504847.210624] sd 13:0:0:1: [sdc] Attached SCSI removable disk
>[504847.213104] sd 13:0:0:0: [sdb] No Caching mode page present
>[504847.213112] sd 13:0:0:0: [sdb] Assuming drive cache: write through
>[504847.215371]  sdb:
>[504847.217841] sd 13:0:0:0: [sdb] No Caching mode page present
>[504847.217851] sd 13:0:0:0: [sdb] Assuming drive cache: write through
>[504847.217858] sd 13:0:0:0: [sdb] Attached SCSI removable disk
>[504847.667511] SELinux: initialized (dev sdb, type vfat), uses genfs_contexts
>[505017.221159] sdb: detected capacity change from 3933732864 to 0
>[505019.384946] usb 2-1.2: USB disconnect, device number 19
>[513410.518163] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[513410.555173] cfg80211: Calling CRDA to update world regulatory domain
>[513410.644940] cfg80211: World regulatory domain updated:
>[513410.644944] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[513410.644946] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[513410.644948] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[513410.644949] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[513410.644951] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[513410.644952] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[513410.644969] cfg80211: Calling CRDA for country: US
>[513410.648356] cfg80211: Regulatory domain changed to country: US
>[513410.648359] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[513410.648361] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[513410.648363] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[513410.648364] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[513410.648366] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[513410.648367] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[513410.648368] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[513412.659070] PM: Syncing filesystems ... done.
>[513413.001518] PM: Preparing system for mem sleep
>[513413.732906] Freezing user space processes ... (elapsed 0.02 seconds) done.
>[513413.755065] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[513413.766044] PM: Entering mem sleep
>[513413.766116] Suspending console(s) (use no_console_suspend to debug)
>[513413.766502] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[513413.766557] sd 0:0:0:0: [sda] Stopping disk
>[513413.814894] ACPI handle has no context!
>[513415.524515] PM: suspend of devices complete after 1761.680 msecs
>[513415.524685] PM: late suspend of devices complete after 0.166 msecs
>[513415.524862] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[513415.546581] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[513415.579398] PM: noirq suspend of devices complete after 54.813 msecs
>[513415.579603] ACPI: Preparing to enter system sleep state S3
>[513415.582859] PM: Saving platform NVS memory
>[513415.584592] Disabling non-boot CPUs ...
>[513415.584935] Broke affinity for irq 44
>[513415.586152] smpboot: CPU 1 is now offline
>[513415.588164] smpboot: CPU 2 is now offline
>[513415.588873] Broke affinity for irq 23
>[513415.589896] smpboot: CPU 3 is now offline
>[513415.590436] Extended CMOS year: 2000
>[513415.591163] ACPI: Low-level resume complete
>[513415.591224] PM: Restoring platform NVS memory
>[513415.591717] Extended CMOS year: 2000
>[513415.591753] CPU0: Thermal monitoring handled by SMI
>[513415.591981] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[513415.592015] Enabling non-boot CPUs ...
>[513415.592144] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[513415.603170] CPU1: Thermal monitoring handled by SMI
>[513415.606778] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[513415.606783] CPU1 is up
>[513415.606844] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[513415.617867] CPU2: Thermal monitoring handled by SMI
>[513415.620672] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[513415.620692] CPU2 is up
>[513415.620748] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[513415.631772] CPU3: Thermal monitoring handled by SMI
>[513415.634596] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[513415.634602] CPU3 is up
>[513415.637275] ACPI: Waking up from system sleep state S3
>[513415.687493] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[513415.764483] PM: noirq resume of devices complete after 121.152 msecs
>[513415.764550] PM: early resume of devices complete after 0.037 msecs
>[513415.764619] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[513415.764669] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[513415.764687] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[513415.764701] pci 0000:00:1e.0: setting latency timer to 64
>[513415.764717] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[513415.764724] ahci 0000:00:1f.2: setting latency timer to 64
>[513415.764899] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[513415.764924] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[513415.764946] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[513415.765928] mei 0000:00:16.0: wd: failed to find the client
>[513415.766837] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[513415.788605] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[513415.788695] radeon 0000:02:00.0: WB enabled
>[513415.788698] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[513415.835271] [drm] ring test on 0 succeeded in 1 usecs
>[513415.835291] [drm] ib test on ring 0 succeeded in 0 usecs
>[513415.995979] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[513416.070719] ata5: SATA link down (SStatus 0 SControl 300)
>[513416.072707] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[513416.100627] ata2.00: configured for UDMA/100
>[513416.264295] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[513416.469542] firewire_core 0000:07:00.3: rediscovered device fw0
>[513418.562865] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[513418.574251] ata1.00: configured for UDMA/133
>[513418.574378] sd 0:0:0:0: [sda] Starting disk
>[513418.576345] Extended CMOS year: 2000
>[513418.597082] PM: resume of devices complete after 2838.048 msecs
>[513418.597214] PM: Finishing wakeup.
>[513418.597215] Restarting tasks ... done.
>[513418.629845] video LNXVIDEO:00: Restoring backlight state
>[513418.770052] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[513418.777077] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[513418.888874] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[513418.947414] r8169 0000:09:00.0: p12p1: link down
>[513418.947469] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[513424.709501] wlan0: authenticate with 20:cf:30:c6:2e:84
>[513424.744528] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[513424.746394] wlan0: authenticated
>[513424.746742] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[513424.751072] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[513424.754605] wlan0: associated
>[513424.754652] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[516945.390828] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[516945.443551] cfg80211: Calling CRDA to update world regulatory domain
>[516945.470971] cfg80211: World regulatory domain updated:
>[516945.470996] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[516945.470999] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[516945.471001] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[516945.471003] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[516945.471005] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[516945.471007] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[516945.471023] cfg80211: Calling CRDA for country: US
>[516945.478008] cfg80211: Regulatory domain changed to country: US
>[516945.478012] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[516945.478014] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[516945.478017] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[516945.478019] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[516945.478021] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[516945.478023] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[516945.478025] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[516946.911259] PM: Syncing filesystems ... done.
>[516946.916531] PM: Preparing system for mem sleep
>[516947.594298] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[516947.606015] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[516947.616962] PM: Entering mem sleep
>[516947.617056] Suspending console(s) (use no_console_suspend to debug)
>[516947.617504] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[516947.617580] sd 0:0:0:0: [sda] Stopping disk
>[516947.663876] ACPI handle has no context!
>[516949.247712] PM: suspend of devices complete after 1633.683 msecs
>[516949.247881] PM: late suspend of devices complete after 0.166 msecs
>[516949.248062] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[516949.269809] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[516949.302614] PM: noirq suspend of devices complete after 54.831 msecs
>[516949.302849] ACPI: Preparing to enter system sleep state S3
>[516949.306081] PM: Saving platform NVS memory
>[516949.307840] Disabling non-boot CPUs ...
>[516949.308170] Broke affinity for irq 44
>[516949.309377] smpboot: CPU 1 is now offline
>[516949.311221] smpboot: CPU 2 is now offline
>[516949.311966] Broke affinity for irq 23
>[516949.312991] smpboot: CPU 3 is now offline
>[516949.313520] Extended CMOS year: 2000
>[516949.314247] ACPI: Low-level resume complete
>[516949.314307] PM: Restoring platform NVS memory
>[516949.314802] Extended CMOS year: 2000
>[516949.314837] CPU0: Thermal monitoring handled by SMI
>[516949.315063] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[516949.315107] Enabling non-boot CPUs ...
>[516949.315235] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[516949.326259] CPU1: Thermal monitoring handled by SMI
>[516949.329853] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[516949.329866] CPU1 is up
>[516949.329924] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[516949.340948] CPU2: Thermal monitoring handled by SMI
>[516949.343729] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[516949.343734] CPU2 is up
>[516949.343790] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[516949.354813] CPU3: Thermal monitoring handled by SMI
>[516949.357650] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[516949.357655] CPU3 is up
>[516949.360360] ACPI: Waking up from system sleep state S3
>[516949.409709] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[516949.486697] PM: noirq resume of devices complete after 121.155 msecs
>[516949.486853] PM: early resume of devices complete after 0.039 msecs
>[516949.486908] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[516949.486946] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[516949.486952] pci 0000:00:1e.0: setting latency timer to 64
>[516949.486977] ahci 0000:00:1f.2: setting latency timer to 64
>[516949.486996] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[516949.487024] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[516949.487124] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[516949.487171] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[516949.487218] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[516949.488131] mei 0000:00:16.0: wd: failed to find the client
>[516949.489036] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[516949.511378] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[516949.511479] radeon 0000:02:00.0: WB enabled
>[516949.511482] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[516949.558044] [drm] ring test on 0 succeeded in 1 usecs
>[516949.558065] [drm] ib test on ring 0 succeeded in 0 usecs
>[516949.718191] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[516949.790935] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[516949.792929] ata5: SATA link down (SStatus 0 SControl 300)
>[516949.818620] ata2.00: configured for UDMA/100
>[516949.986523] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[516950.038439] firewire_core 0000:07:00.3: rediscovered device fw0
>[516952.289097] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[516952.296749] ata1.00: configured for UDMA/133
>[516952.296907] sd 0:0:0:0: [sda] Starting disk
>[516952.298901] Extended CMOS year: 2000
>[516952.319641] PM: resume of devices complete after 2838.298 msecs
>[516952.319758] PM: Finishing wakeup.
>[516952.319759] Restarting tasks ... done.
>[516952.350891] video LNXVIDEO:00: Restoring backlight state
>[516952.396906] usb 2-1.1: new low-speed USB device number 20 using ehci_hcd
>[516952.479070] usb 2-1.1: New USB device found, idVendor=413c, idProduct=3012
>[516952.479076] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[516952.479080] usb 2-1.1: Product: Dell USB Optical Mouse
>[516952.479082] usb 2-1.1: Manufacturer: Dell
>[516952.483898] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input15
>[516952.486217] hid-generic 0003:413C:3012.0005: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[516952.686784] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[516952.693815] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[516952.807960] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[516952.866282] r8169 0000:09:00.0: p12p1: link down
>[516952.866327] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[516958.259009] wlan0: authenticate with 58:6d:8f:07:37:42
>[516958.275821] wlan0: send auth to 58:6d:8f:07:37:42 (try 1/3)
>[516958.277696] wlan0: authenticated
>[516958.277968] wlan0: waiting for beacon from 58:6d:8f:07:37:42
>[516958.363255] wlan0: associate with 58:6d:8f:07:37:42 (try 1/3)
>[516958.366730] wlan0: RX AssocResp from 58:6d:8f:07:37:42 (capab=0x411 status=0 aid=1)
>[516958.374234] wlan0: associated
>[516958.374298] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[542540.641181] usb 2-1.1: USB disconnect, device number 20
>[543751.061281] wlan0: deauthenticating from 58:6d:8f:07:37:42 by local choice (reason=3)
>[543751.111543] cfg80211: Calling CRDA to update world regulatory domain
>[543751.329348] cfg80211: World regulatory domain updated:
>[543751.329352] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[543751.329355] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[543751.329358] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[543751.329360] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[543751.329362] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[543751.329365] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[543751.329385] cfg80211: Calling CRDA for country: US
>[543751.332799] cfg80211: Regulatory domain changed to country: US
>[543751.332803] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[543751.332805] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[543751.332808] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[543751.332810] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[543751.332812] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[543751.332814] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[543751.332817] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[543754.076264] PM: Syncing filesystems ... done.
>[543754.081200] PM: Preparing system for mem sleep
>[543754.790529] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[543754.802059] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[543754.812996] PM: Entering mem sleep
>[543754.813092] Suspending console(s) (use no_console_suspend to debug)
>[543754.813509] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[543754.813571] sd 0:0:0:0: [sda] Stopping disk
>[543754.864884] ACPI handle has no context!
>[543756.613413] PM: suspend of devices complete after 1803.688 msecs
>[543756.613583] PM: late suspend of devices complete after 0.168 msecs
>[543756.613762] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[543756.635514] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[543756.668304] PM: noirq suspend of devices complete after 54.822 msecs
>[543756.668527] ACPI: Preparing to enter system sleep state S3
>[543756.671775] PM: Saving platform NVS memory
>[543756.673505] Disabling non-boot CPUs ...
>[543756.673839] Broke affinity for irq 44
>[543756.675048] smpboot: CPU 1 is now offline
>[543756.676910] smpboot: CPU 2 is now offline
>[543756.677649] Broke affinity for irq 23
>[543756.678676] smpboot: CPU 3 is now offline
>[543756.679213] Extended CMOS year: 2000
>[543756.679939] ACPI: Low-level resume complete
>[543756.679999] PM: Restoring platform NVS memory
>[543756.680504] Extended CMOS year: 2000
>[543756.680539] CPU0: Thermal monitoring handled by SMI
>[543756.680762] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[543756.680804] Enabling non-boot CPUs ...
>[543756.680936] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[543756.691961] CPU1: Thermal monitoring handled by SMI
>[543756.695552] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[543756.695566] CPU1 is up
>[543756.695625] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[543756.706648] CPU2: Thermal monitoring handled by SMI
>[543756.709450] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[543756.709468] CPU2 is up
>[543756.709524] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[543756.720547] CPU3: Thermal monitoring handled by SMI
>[543756.723375] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[543756.723381] CPU3 is up
>[543756.726097] ACPI: Waking up from system sleep state S3
>[543756.775416] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[543756.852407] PM: noirq resume of devices complete after 121.156 msecs
>[543756.852562] PM: early resume of devices complete after 0.039 msecs
>[543756.852619] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[543756.852673] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[543756.852700] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[543756.852702] pci 0000:00:1e.0: setting latency timer to 64
>[543756.852721] ahci 0000:00:1f.2: setting latency timer to 64
>[543756.852728] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[543756.852904] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[543756.852923] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[543756.852954] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[543756.853735] mei 0000:00:16.0: wd: failed to find the client
>[543756.854953] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[543756.878730] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[543756.878820] radeon 0000:02:00.0: WB enabled
>[543756.878823] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[543756.925387] [drm] ring test on 0 succeeded in 1 usecs
>[543756.925409] [drm] ib test on ring 0 succeeded in 0 usecs
>[543757.108944] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[543757.158631] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[543757.160618] ata5: SATA link down (SStatus 0 SControl 300)
>[543757.186196] ata2.00: configured for UDMA/100
>[543757.352247] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[543757.403151] firewire_core 0000:07:00.3: rediscovered device fw0
>[543759.854406] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[543759.866276] ata1.00: configured for UDMA/133
>[543759.866405] sd 0:0:0:0: [sda] Starting disk
>[543759.868996] Extended CMOS year: 2000
>[543759.889252] PM: resume of devices complete after 3042.623 msecs
>[543759.889383] PM: Finishing wakeup.
>[543759.889384] Restarting tasks ... done.
>[543759.933646] video LNXVIDEO:00: Restoring backlight state
>[543760.613209] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[543760.620265] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[543760.757380] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[543760.816794] r8169 0000:09:00.0: p12p1: link down
>[543760.816837] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[543766.115190] wlan0: authenticate with 20:cf:30:c6:2e:84
>[543766.146832] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[543766.151282] wlan0: authenticated
>[543766.152020] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[543766.159590] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[543766.161927] wlan0: associated
>[543766.161998] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[562595.992392] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[562596.027404] cfg80211: Calling CRDA to update world regulatory domain
>[562596.050341] cfg80211: World regulatory domain updated:
>[562596.050345] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[562596.050348] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[562596.050351] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[562596.050353] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[562596.050354] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[562596.050357] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[562596.050373] cfg80211: Calling CRDA for country: US
>[562596.054487] cfg80211: Regulatory domain changed to country: US
>[562596.054491] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[562596.054494] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[562596.054497] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[562596.054499] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[562596.054501] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[562596.054504] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[562596.054506] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[562597.518225] PM: Syncing filesystems ... done.
>[562597.523265] PM: Preparing system for mem sleep
>[562598.214432] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[562598.226116] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[562598.237052] PM: Entering mem sleep
>[562598.237153] Suspending console(s) (use no_console_suspend to debug)
>[562598.237544] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[562598.237769] sd 0:0:0:0: [sda] Stopping disk
>[562598.239725] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[562598.284051] ACPI handle has no context!
>[562599.816116] PM: suspend of devices complete after 1581.887 msecs
>[562599.816316] PM: late suspend of devices complete after 0.196 msecs
>[562599.816544] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[562599.838034] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[562599.870834] PM: noirq suspend of devices complete after 54.622 msecs
>[562599.871061] ACPI: Preparing to enter system sleep state S3
>[562599.874300] PM: Saving platform NVS memory
>[562599.876032] Disabling non-boot CPUs ...
>[562599.876373] Broke affinity for irq 44
>[562599.877401] smpboot: CPU 1 is now offline
>[562599.879433] smpboot: CPU 2 is now offline
>[562599.880156] Broke affinity for irq 23
>[562599.881179] smpboot: CPU 3 is now offline
>[562599.881686] Extended CMOS year: 2000
>[562599.882413] ACPI: Low-level resume complete
>[562599.882473] PM: Restoring platform NVS memory
>[562599.882978] Extended CMOS year: 2000
>[562599.883013] CPU0: Thermal monitoring handled by SMI
>[562599.883240] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[562599.883285] Enabling non-boot CPUs ...
>[562599.883411] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[562599.894435] CPU1: Thermal monitoring handled by SMI
>[562599.898045] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[562599.898058] CPU1 is up
>[562599.898122] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[562599.909145] CPU2: Thermal monitoring handled by SMI
>[562599.911921] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[562599.911925] CPU2 is up
>[562599.911990] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[562599.923016] CPU3: Thermal monitoring handled by SMI
>[562599.925829] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[562599.925834] CPU3 is up
>[562599.928529] ACPI: Waking up from system sleep state S3
>[562599.977945] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[562600.054939] PM: noirq resume of devices complete after 121.162 msecs
>[562600.055006] PM: early resume of devices complete after 0.037 msecs
>[562600.055072] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[562600.055128] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[562600.055152] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[562600.055155] pci 0000:00:1e.0: setting latency timer to 64
>[562600.055168] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[562600.055177] ahci 0000:00:1f.2: setting latency timer to 64
>[562600.055317] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[562600.055365] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[562600.055394] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[562600.056220] mei 0000:00:16.0: wd: failed to find the client
>[562600.057318] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[562600.079398] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[562600.079484] radeon 0000:02:00.0: WB enabled
>[562600.079487] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[562600.126050] [drm] ring test on 0 succeeded in 1 usecs
>[562600.126071] [drm] ib test on ring 0 succeeded in 0 usecs
>[562600.286511] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[562600.361164] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[562600.363156] ata5: SATA link down (SStatus 0 SControl 300)
>[562600.388847] ata2.00: configured for UDMA/100
>[562600.554775] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[562600.609663] firewire_core 0000:07:00.3: rediscovered device fw0
>[562602.853278] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[562602.858268] ata1.00: configured for UDMA/133
>[562602.858463] sd 0:0:0:0: [sda] Starting disk
>[562602.860747] Extended CMOS year: 2000
>[562602.881079] PM: resume of devices complete after 2831.571 msecs
>[562602.881246] PM: Finishing wakeup.
>[562602.881247] Restarting tasks ... done.
>[562602.909409] video LNXVIDEO:00: Restoring backlight state
>[562602.993835] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[562603.000877] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[562603.110749] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[562603.172015] r8169 0000:09:00.0: p12p1: link down
>[562603.172057] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[562608.478751] wlan0: authenticate with 20:cf:30:c6:2e:84
>[562608.504073] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[562608.505971] wlan0: authenticated
>[562608.506243] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[562608.509555] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[562608.512119] wlan0: associated
>[562608.512173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[567020.290403] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[567020.331705] cfg80211: Calling CRDA to update world regulatory domain
>[567020.386418] cfg80211: World regulatory domain updated:
>[567020.386422] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[567020.386424] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[567020.386426] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[567020.386427] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[567020.386429] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[567020.386430] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[567020.386444] cfg80211: Calling CRDA for country: US
>[567020.389788] cfg80211: Regulatory domain changed to country: US
>[567020.389792] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[567020.389795] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[567020.389797] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[567020.389800] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[567020.389802] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[567020.389803] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[567020.389805] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[567021.762541] PM: Syncing filesystems ... done.
>[567021.768789] PM: Preparing system for mem sleep
>[567022.457725] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[567022.469319] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[567022.480304] PM: Entering mem sleep
>[567022.480390] Suspending console(s) (use no_console_suspend to debug)
>[567022.480751] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[567022.480953] sd 0:0:0:0: [sda] Stopping disk
>[567022.482810] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[567022.527224] ACPI handle has no context!
>[567024.136925] PM: suspend of devices complete after 1659.682 msecs
>[567024.137096] PM: late suspend of devices complete after 0.168 msecs
>[567024.137321] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[567024.159037] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[567024.191844] PM: noirq suspend of devices complete after 54.852 msecs
>[567024.192086] ACPI: Preparing to enter system sleep state S3
>[567024.195310] PM: Saving platform NVS memory
>[567024.197025] Disabling non-boot CPUs ...
>[567024.197366] Broke affinity for irq 44
>[567024.198571] smpboot: CPU 1 is now offline
>[567024.200516] smpboot: CPU 2 is now offline
>[567024.201180] Broke affinity for irq 23
>[567024.202204] smpboot: CPU 3 is now offline
>[567024.202674] Extended CMOS year: 2000
>[567024.203399] ACPI: Low-level resume complete
>[567024.203459] PM: Restoring platform NVS memory
>[567024.203960] Extended CMOS year: 2000
>[567024.203996] CPU0: Thermal monitoring handled by SMI
>[567024.204221] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[567024.204262] Enabling non-boot CPUs ...
>[567024.204390] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[567024.215415] CPU1: Thermal monitoring handled by SMI
>[567024.219011] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[567024.219024] CPU1 is up
>[567024.219084] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[567024.230108] CPU2: Thermal monitoring handled by SMI
>[567024.232877] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[567024.232882] CPU2 is up
>[567024.232943] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[567024.244065] CPU3: Thermal monitoring handled by SMI
>[567024.246893] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[567024.246898] CPU3 is up
>[567024.249597] ACPI: Waking up from system sleep state S3
>[567024.298948] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[567024.375938] PM: noirq resume of devices complete after 121.163 msecs
>[567024.376093] PM: early resume of devices complete after 0.039 msecs
>[567024.376150] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[567024.376182] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[567024.376192] pci 0000:00:1e.0: setting latency timer to 64
>[567024.376221] ahci 0000:00:1f.2: setting latency timer to 64
>[567024.376238] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[567024.376286] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[567024.376481] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[567024.376489] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[567024.376502] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[567024.377335] mei 0000:00:16.0: wd: failed to find the client
>[567024.378366] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[567024.402049] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[567024.402135] radeon 0000:02:00.0: WB enabled
>[567024.402138] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[567024.448702] [drm] ring test on 0 succeeded in 1 usecs
>[567024.448722] [drm] ib test on ring 0 succeeded in 0 usecs
>[567024.608526] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[567024.682149] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[567024.686138] ata5: SATA link down (SStatus 0 SControl 300)
>[567024.709863] ata2.00: configured for UDMA/100
>[567024.875735] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[567024.926658] firewire_core 0000:07:00.3: rediscovered device fw0
>[567027.178220] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[567027.184994] ata1.00: configured for UDMA/133
>[567027.185176] sd 0:0:0:0: [sda] Starting disk
>[567027.187295] Extended CMOS year: 2000
>[567027.216245] PM: resume of devices complete after 2845.788 msecs
>[567027.216375] PM: Finishing wakeup.
>[567027.216376] Restarting tasks ... done.
>[567027.248582] video LNXVIDEO:00: Restoring backlight state
>[567027.279603] usb 2-1.1: new low-speed USB device number 21 using ehci_hcd
>[567027.348121] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[567027.355283] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[567027.371520] usb 2-1.1: New USB device found, idVendor=413c, idProduct=3012
>[567027.371525] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[567027.371528] usb 2-1.1: Product: Dell USB Optical Mouse
>[567027.371531] usb 2-1.1: Manufacturer: Dell
>[567027.374430] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input16
>[567027.375282] hid-generic 0003:413C:3012.0006: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[567027.465697] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[567027.524825] r8169 0000:09:00.0: p12p1: link down
>[567027.524886] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[567032.965174] wlan0: authenticate with 58:6d:8f:07:37:42
>[567032.985677] wlan0: send auth to 58:6d:8f:07:37:42 (try 1/3)
>[567032.987562] wlan0: authenticated
>[567032.988606] wlan0: associate with 58:6d:8f:07:37:42 (try 1/3)
>[567032.993447] wlan0: RX AssocResp from 58:6d:8f:07:37:42 (capab=0x411 status=0 aid=4)
>[567032.997004] wlan0: associated
>[567032.997052] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[598765.570052] dconf worker[31730]: segfault at a ip 000000300ac61082 sp 00007f35b74c6830 error 4 in libglib-2.0.so.0.3200.4[300ac00000+11d000]
>[609090.675563] usb 2-1.1: USB disconnect, device number 21
>[610123.401812] usb 2-1.1: new low-speed USB device number 22 using ehci_hcd
>[610123.491997] usb 2-1.1: New USB device found, idVendor=413c, idProduct=3012
>[610123.492003] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[610123.492007] usb 2-1.1: Product: Dell USB Optical Mouse
>[610123.492010] usb 2-1.1: Manufacturer: Dell
>[610123.495840] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input17
>[610123.496840] hid-generic 0003:413C:3012.0007: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[610411.208743] usb 2-1.1: USB disconnect, device number 22
>[610415.992452] wlan0: deauthenticating from 58:6d:8f:07:37:42 by local choice (reason=3)
>[610416.033598] cfg80211: Calling CRDA to update world regulatory domain
>[610416.576566] cfg80211: World regulatory domain updated:
>[610416.576570] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610416.576572] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610416.576574] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610416.576575] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610416.576577] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610416.576579] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610416.576591] cfg80211: Calling CRDA for country: US
>[610416.579426] cfg80211: Regulatory domain changed to country: US
>[610416.579432] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610416.579436] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[610416.579440] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[610416.579444] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610416.579447] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610416.579450] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610416.579454] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[610418.701951] PM: Syncing filesystems ... done.
>[610418.936099] PM: Preparing system for mem sleep
>[610419.621994] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[610419.655516] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[610419.666583] PM: Entering mem sleep
>[610419.666718] Suspending console(s) (use no_console_suspend to debug)
>[610419.667269] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[610419.667336] sd 0:0:0:0: [sda] Stopping disk
>[610419.670410] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[610419.716399] ACPI handle has no context!
>[610421.364284] PM: suspend of devices complete after 1700.676 msecs
>[610421.364488] PM: late suspend of devices complete after 0.201 msecs
>[610421.364714] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[610421.386223] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[610421.419056] PM: noirq suspend of devices complete after 54.670 msecs
>[610421.419266] ACPI: Preparing to enter system sleep state S3
>[610421.425041] PM: Saving platform NVS memory
>[610421.426802] Disabling non-boot CPUs ...
>[610421.427133] Broke affinity for irq 44
>[610421.428359] smpboot: CPU 1 is now offline
>[610421.430168] smpboot: CPU 2 is now offline
>[610421.430886] Broke affinity for irq 23
>[610421.431918] smpboot: CPU 3 is now offline
>[610421.432586] Extended CMOS year: 2000
>[610421.433367] ACPI: Low-level resume complete
>[610421.433427] PM: Restoring platform NVS memory
>[610421.433932] Extended CMOS year: 2000
>[610421.433967] CPU0: Thermal monitoring handled by SMI
>[610421.434194] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[610421.434225] Enabling non-boot CPUs ...
>[610421.434371] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[610421.445397] CPU1: Thermal monitoring handled by SMI
>[610421.449007] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[610421.449013] CPU1 is up
>[610421.449076] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[610421.460099] CPU2: Thermal monitoring handled by SMI
>[610421.462870] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[610421.462875] CPU2 is up
>[610421.462936] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[610421.473959] CPU3: Thermal monitoring handled by SMI
>[610421.476798] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[610421.476806] CPU3 is up
>[610421.480783] ACPI: Waking up from system sleep state S3
>[610421.530200] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[610421.607257] PM: noirq resume of devices complete after 121.235 msecs
>[610421.607513] PM: early resume of devices complete after 0.078 msecs
>[610421.607605] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[610421.607651] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[610421.607673] pci 0000:00:1e.0: setting latency timer to 64
>[610421.607681] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[610421.607716] ahci 0000:00:1f.2: setting latency timer to 64
>[610421.607764] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[610421.607867] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[610421.607950] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[610421.607955] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[610421.608939] mei 0000:00:16.0: wd: failed to find the client
>[610421.610071] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[610421.640358] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[610421.640492] radeon 0000:02:00.0: WB enabled
>[610421.640498] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[610421.687204] [drm] ring test on 0 succeeded in 1 usecs
>[610421.687229] [drm] ib test on ring 0 succeeded in 0 usecs
>[610421.839724] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[610421.914453] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[610421.916431] ata5: SATA link down (SStatus 0 SControl 300)
>[610421.942170] ata2.00: configured for UDMA/100
>[610422.107029] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[610422.158941] firewire_core 0000:07:00.3: rediscovered device fw0
>[610424.406539] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[610424.418595] ata1.00: configured for UDMA/133
>[610424.418785] sd 0:0:0:0: [sda] Starting disk
>[610424.420804] Extended CMOS year: 2000
>[610424.441297] PM: resume of devices complete after 2839.313 msecs
>[610424.441507] PM: Finishing wakeup.
>[610424.441509] Restarting tasks ... done.
>[610424.493926] video LNXVIDEO:00: Restoring backlight state
>[610424.786950] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[610424.794022] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[610424.931599] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[610424.994720] r8169 0000:09:00.0: p12p1: link down
>[610424.994779] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[610430.478486] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610430.506034] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610430.706209] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[610430.906831] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[610431.107387] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[610433.864078] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610433.874856] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610434.074646] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[610434.275285] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[610434.475848] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[610437.212082] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610437.217558] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610437.230223] wlan0: authenticated
>[610437.230579] wlan0: waiting for beacon from 20:cf:30:c6:2e:84
>[610440.085412] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610440.098035] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610440.109071] wlan0: authenticated
>[610440.109820] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[610440.310422] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[610440.511081] wlan0: associate with 20:cf:30:c6:2e:84 (try 3/3)
>[610440.711686] wlan0: association with 20:cf:30:c6:2e:84 timed out
>[610443.444459] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610443.454323] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610443.460499] wlan0: authenticated
>[610443.460752] wlan0: waiting for beacon from 20:cf:30:c6:2e:84
>[610446.318023] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610446.328813] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610446.340942] wlan0: authenticated
>[610446.341647] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[610446.352422] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[610446.364923] wlan0: associated
>[610446.364981] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[610452.655421] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[610452.676950] cfg80211: Calling CRDA to update world regulatory domain
>[610452.686766] cfg80211: World regulatory domain updated:
>[610452.686774] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610452.686781] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610452.686787] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610452.686793] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610452.686798] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610452.686803] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610452.686846] cfg80211: Calling CRDA for country: US
>[610452.691586] cfg80211: Regulatory domain changed to country: US
>[610452.691591] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610452.691595] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[610452.691599] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[610452.691602] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610452.691605] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610452.691608] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610452.691611] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[610874.578813] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610874.591205] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610874.594905] wlan0: authenticated
>[610874.595293] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[610874.795937] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[610874.805228] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[610874.813635] wlan0: associated
>[610881.553987] cfg80211: Calling CRDA to update world regulatory domain
>[610881.561105] cfg80211: World regulatory domain updated:
>[610881.561112] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610881.561116] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610881.561120] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610881.561124] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610881.561127] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610881.561131] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610881.561161] cfg80211: Calling CRDA for country: US
>[610881.564936] cfg80211: Regulatory domain changed to country: US
>[610881.564941] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610881.564946] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[610881.564950] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[610881.564954] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610881.564957] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610881.564960] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610881.564963] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[610884.288021] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610884.300040] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610884.317596] wlan0: authenticated
>[610884.318315] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[610884.518895] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[610884.719545] wlan0: associate with 20:cf:30:c6:2e:84 (try 3/3)
>[610884.920155] wlan0: association with 20:cf:30:c6:2e:84 timed out
>[610887.652470] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610887.663156] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610887.666785] wlan0: authenticated
>[610887.667043] wlan0: waiting for beacon from 20:cf:30:c6:2e:84
>[610890.503927] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610890.514813] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610890.714785] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[610890.915399] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[610891.116049] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[610893.860111] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610893.862246] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610894.062294] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[610894.067176] wlan0: authenticated
>[610894.067510] wlan0: waiting for beacon from 20:cf:30:c6:2e:84
>[610908.439382] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610908.450284] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610908.650774] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[610908.851426] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[610909.051959] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[610911.781258] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610911.784011] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610911.785908] wlan0: authenticated
>[610911.786638] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[610911.987265] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[610912.021289] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[610912.032227] wlan0: associated
>[610915.485544] cfg80211: Calling CRDA to update world regulatory domain
>[610915.491376] cfg80211: World regulatory domain updated:
>[610915.491382] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610915.491386] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610915.491390] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610915.491394] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610915.491397] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610915.491401] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610915.491428] cfg80211: Calling CRDA for country: US
>[610915.496557] cfg80211: Regulatory domain changed to country: US
>[610915.496563] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610915.496568] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[610915.496571] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[610915.496575] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610915.496578] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610915.496581] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610915.496585] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[610918.209734] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610918.222042] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610918.228278] wlan0: authenticated
>[610918.229041] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[610918.429680] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[610918.437990] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[610918.447757] wlan0: associated
>[610921.478435] cfg80211: Calling CRDA to update world regulatory domain
>[610921.482485] cfg80211: World regulatory domain updated:
>[610921.482491] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610921.482495] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610921.482499] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610921.482503] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610921.482506] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610921.482510] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610921.482537] cfg80211: Calling CRDA for country: US
>[610921.486545] cfg80211: Regulatory domain changed to country: US
>[610921.486551] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610921.486555] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[610921.486559] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[610921.486563] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610921.486566] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610921.486570] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610921.486573] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[610924.178540] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610924.190290] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610924.198652] wlan0: authenticated
>[610924.199404] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[610924.223941] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[610924.232812] wlan0: associated
>[610927.463041] cfg80211: Calling CRDA to update world regulatory domain
>[610927.469410] cfg80211: World regulatory domain updated:
>[610927.469418] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610927.469423] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610927.469428] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610927.469433] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610927.469438] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610927.469443] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610927.469481] cfg80211: Calling CRDA for country: US
>[610927.474649] cfg80211: Regulatory domain changed to country: US
>[610927.474656] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610927.474662] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[610927.474667] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[610927.474672] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610927.474677] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610927.474681] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610927.474686] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[610930.193548] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610930.205352] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610930.405239] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[610930.424264] wlan0: authenticated
>[610930.425190] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[610930.625871] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[610930.635393] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[610930.643274] wlan0: associated
>[610930.721291] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[610930.818345] cfg80211: Calling CRDA to update world regulatory domain
>[610930.822761] cfg80211: World regulatory domain updated:
>[610930.822768] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610930.822772] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610930.822776] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610930.822780] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610930.822783] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610930.822787] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610930.822811] cfg80211: Calling CRDA for country: US
>[610930.826574] cfg80211: Regulatory domain changed to country: US
>[610930.826579] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610930.826583] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[610930.826587] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[610930.826590] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610930.826593] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610930.826596] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610930.826599] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[610934.749723] r8169 0000:09:00.0: p12p1: link up
>[610934.749768] IPv6: ADDRCONF(NETDEV_CHANGE): p12p1: link becomes ready
>[610939.459284] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610939.472020] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610939.657776] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[610939.842983] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[610939.868453] wlan0: authenticated
>[610939.869738] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[610940.054917] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[610940.091936] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[610940.098944] wlan0: associated
>[610942.931818] cfg80211: Calling CRDA to update world regulatory domain
>[610942.945419] cfg80211: World regulatory domain updated:
>[610942.945427] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610942.945433] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610942.945439] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610942.945444] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[610942.945449] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610942.945454] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610942.945491] cfg80211: Calling CRDA for country: US
>[610942.953238] cfg80211: Regulatory domain changed to country: US
>[610942.953246] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[610942.953253] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[610942.953259] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[610942.953264] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610942.953269] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610942.953274] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[610942.953280] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[610945.653770] wlan0: authenticate with 20:cf:30:c6:2e:84
>[610945.657975] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[610945.858558] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[610946.059198] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[610946.259779] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[611040.781932] wlan0: authenticate with 20:cf:30:c6:2e:84
>[611040.792768] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[611040.794668] wlan0: authenticated
>[611040.795505] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[611040.798895] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[611040.802205] wlan0: associated
>[614976.389373] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[614976.439727] cfg80211: Calling CRDA to update world regulatory domain
>[614976.452337] cfg80211: World regulatory domain updated:
>[614976.452345] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[614976.452351] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[614976.452355] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[614976.452360] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[614976.452364] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[614976.452368] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[614976.452404] cfg80211: Calling CRDA for country: US
>[614976.458641] cfg80211: Regulatory domain changed to country: US
>[614976.458647] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[614976.458651] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[614976.458654] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[614976.458657] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[614976.458660] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[614976.458663] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[614976.458666] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[614978.172146] PM: Syncing filesystems ... done.
>[614978.335487] PM: Preparing system for mem sleep
>[614979.024683] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[614979.036133] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[614979.047098] PM: Entering mem sleep
>[614979.047227] Suspending console(s) (use no_console_suspend to debug)
>[614979.047769] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[614979.047849] sd 0:0:0:0: [sda] Stopping disk
>[614979.098006] ACPI handle has no context!
>[614980.961443] PM: suspend of devices complete after 1917.756 msecs
>[614980.961679] PM: late suspend of devices complete after 0.232 msecs
>[614980.961989] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[614980.983433] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[614981.016215] PM: noirq suspend of devices complete after 54.638 msecs
>[614981.016448] ACPI: Preparing to enter system sleep state S3
>[614981.019869] PM: Saving platform NVS memory
>[614981.023291] Disabling non-boot CPUs ...
>[614981.023778] Broke affinity for irq 44
>[614981.025053] smpboot: CPU 1 is now offline
>[614981.027351] smpboot: CPU 2 is now offline
>[614981.028292] Broke affinity for irq 23
>[614981.029332] smpboot: CPU 3 is now offline
>[614981.030011] Extended CMOS year: 2000
>[614981.030792] ACPI: Low-level resume complete
>[614981.030852] PM: Restoring platform NVS memory
>[614981.031359] Extended CMOS year: 2000
>[614981.031395] CPU0: Thermal monitoring handled by SMI
>[614981.031621] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[614981.031646] Enabling non-boot CPUs ...
>[614981.031760] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[614981.042785] CPU1: Thermal monitoring handled by SMI
>[614981.046395] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[614981.046400] CPU1 is up
>[614981.046468] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[614981.057492] CPU2: Thermal monitoring handled by SMI
>[614981.060292] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[614981.060297] CPU2 is up
>[614981.060351] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[614981.071377] CPU3: Thermal monitoring handled by SMI
>[614981.074195] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[614981.074204] CPU3 is up
>[614981.078160] ACPI: Waking up from system sleep state S3
>[614981.128374] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[614981.205431] PM: noirq resume of devices complete after 121.236 msecs
>[614981.205686] PM: early resume of devices complete after 0.078 msecs
>[614981.205779] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[614981.205825] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[614981.205849] pci 0000:00:1e.0: setting latency timer to 64
>[614981.205857] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[614981.205890] ahci 0000:00:1f.2: setting latency timer to 64
>[614981.205934] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[614981.206050] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[614981.206123] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[614981.206181] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[614981.207106] mei 0000:00:16.0: wd: failed to find the client
>[614981.208290] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[614981.238098] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[614981.238228] radeon 0000:02:00.0: WB enabled
>[614981.238233] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[614981.284905] [drm] ring test on 0 succeeded in 1 usecs
>[614981.284930] [drm] ib test on ring 0 succeeded in 0 usecs
>[614981.437833] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[614981.510633] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[614981.512625] ata5: SATA link down (SStatus 0 SControl 300)
>[614981.538278] ata2.00: configured for UDMA/100
>[614981.705183] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[614981.757136] firewire_core 0000:07:00.3: rediscovered device fw0
>[614984.008740] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[614984.021794] ata1.00: configured for UDMA/133
>[614984.021949] sd 0:0:0:0: [sda] Starting disk
>[614984.023727] Extended CMOS year: 2000
>[614984.044784] PM: resume of devices complete after 2844.626 msecs
>[614984.044983] PM: Finishing wakeup.
>[614984.044985] Restarting tasks ... done.
>[614984.112741] video LNXVIDEO:00: Restoring backlight state
>[614984.305522] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[614984.314119] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[614984.436468] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[614984.498093] r8169 0000:09:00.0: p12p1: link down
>[614984.498107] r8169 0000:09:00.0: p12p1: link down
>[614984.498176] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[614987.883756] r8169 0000:09:00.0: p12p1: link up
>[614987.883771] IPv6: ADDRCONF(NETDEV_CHANGE): p12p1: link becomes ready
>[614989.869734] wlan0: authenticate with 20:cf:30:c6:2e:84
>[614989.904934] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[614989.906847] wlan0: authenticated
>[614989.907198] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[614989.910526] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[614989.912994] wlan0: associated
>[614989.913044] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[618376.886352] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[618376.917945] cfg80211: Calling CRDA to update world regulatory domain
>[618376.935157] cfg80211: World regulatory domain updated:
>[618376.935164] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[618376.935168] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[618376.935171] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[618376.935174] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[618376.935177] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[618376.935180] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[618376.935210] cfg80211: Calling CRDA for country: US
>[618376.939977] cfg80211: Regulatory domain changed to country: US
>[618376.939983] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[618376.939987] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[618376.939990] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[618376.939993] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[618376.939996] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[618376.939999] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[618376.940002] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[618378.314944] PM: Syncing filesystems ... done.
>[618378.322423] PM: Preparing system for mem sleep
>[618379.138940] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[618379.151480] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[618379.162407] PM: Entering mem sleep
>[618379.162514] Suspending console(s) (use no_console_suspend to debug)
>[618379.162928] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[618379.163004] sd 0:0:0:0: [sda] Stopping disk
>[618379.209282] ACPI handle has no context!
>[618380.776218] PM: suspend of devices complete after 1616.675 msecs
>[618380.776443] PM: late suspend of devices complete after 0.221 msecs
>[618380.776740] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[618380.798323] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[618380.831100] PM: noirq suspend of devices complete after 54.759 msecs
>[618380.831332] ACPI: Preparing to enter system sleep state S3
>[618380.834764] PM: Saving platform NVS memory
>[618380.838189] Disabling non-boot CPUs ...
>[618380.838818] Broke affinity for irq 44
>[618380.840130] smpboot: CPU 1 is now offline
>[618380.842440] smpboot: CPU 2 is now offline
>[618380.843328] Broke affinity for irq 23
>[618380.844368] smpboot: CPU 3 is now offline
>[618380.845023] Extended CMOS year: 2000
>[618380.845806] ACPI: Low-level resume complete
>[618380.845866] PM: Restoring platform NVS memory
>[618380.846369] Extended CMOS year: 2000
>[618380.846404] CPU0: Thermal monitoring handled by SMI
>[618380.846641] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[618380.846686] Enabling non-boot CPUs ...
>[618380.846814] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[618380.857840] CPU1: Thermal monitoring handled by SMI
>[618380.861446] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[618380.861459] CPU1 is up
>[618380.861519] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[618380.872543] CPU2: Thermal monitoring handled by SMI
>[618380.875346] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[618380.875361] CPU2 is up
>[618380.875418] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[618380.886441] CPU3: Thermal monitoring handled by SMI
>[618380.889279] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[618380.889287] CPU3 is up
>[618380.893225] ACPI: Waking up from system sleep state S3
>[618380.943272] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[618381.020325] PM: noirq resume of devices complete after 121.235 msecs
>[618381.020580] PM: early resume of devices complete after 0.078 msecs
>[618381.020673] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[618381.020752] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[618381.020760] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[618381.020804] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[618381.020808] pci 0000:00:1e.0: setting latency timer to 64
>[618381.020818] ahci 0000:00:1f.2: setting latency timer to 64
>[618381.020983] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[618381.021089] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[618381.021118] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[618381.021928] mei 0000:00:16.0: wd: failed to find the client
>[618381.023160] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[618381.049342] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[618381.049469] radeon 0000:02:00.0: WB enabled
>[618381.049474] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[618381.096196] [drm] ring test on 0 succeeded in 1 usecs
>[618381.096227] [drm] ib test on ring 0 succeeded in 0 usecs
>[618381.254740] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[618381.327467] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[618381.329459] ata5: SATA link down (SStatus 0 SControl 300)
>[618381.359020] ata2.00: configured for UDMA/100
>[618381.520071] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[618381.572019] firewire_core 0000:07:00.3: rediscovered device fw0
>[618383.819622] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[618383.826580] ata1.00: configured for UDMA/133
>[618383.826703] sd 0:0:0:0: [sda] Starting disk
>[618383.828943] Extended CMOS year: 2000
>[618383.849346] PM: resume of devices complete after 2834.266 msecs
>[618383.849560] PM: Finishing wakeup.
>[618383.849562] Restarting tasks ... done.
>[618383.907459] video LNXVIDEO:00: Restoring backlight state
>[618383.932419] usb 2-1.1: new low-speed USB device number 23 using ehci_hcd
>[618384.021749] usb 2-1.1: New USB device found, idVendor=413c, idProduct=3012
>[618384.021758] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[618384.021764] usb 2-1.1: Product: Dell USB Optical Mouse
>[618384.021769] usb 2-1.1: Manufacturer: Dell
>[618384.026105] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input18
>[618384.027116] hid-generic 0003:413C:3012.0008: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[618384.088669] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[618384.095719] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[618384.213058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[618384.275004] r8169 0000:09:00.0: p12p1: link down
>[618384.275096] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[618389.780805] wlan0: authenticate with 58:6d:8f:07:37:42
>[618389.785889] wlan0: send auth to 58:6d:8f:07:37:42 (try 1/3)
>[618389.787842] wlan0: authenticated
>[618389.788097] wlan0: waiting for beacon from 58:6d:8f:07:37:42
>[618389.862804] wlan0: associate with 58:6d:8f:07:37:42 (try 1/3)
>[618389.869934] wlan0: RX AssocResp from 58:6d:8f:07:37:42 (capab=0x411 status=0 aid=4)
>[618389.874327] wlan0: associated
>[618389.874387] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[640266.267866] wlan0: deauthenticating from 58:6d:8f:07:37:42 by local choice (reason=3)
>[640266.321773] cfg80211: Calling CRDA to update world regulatory domain
>[640266.367765] cfg80211: World regulatory domain updated:
>[640266.367772] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[640266.367778] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640266.367783] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[640266.367788] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[640266.367793] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640266.367798] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640266.367825] cfg80211: Calling CRDA for country: US
>[640266.372080] cfg80211: Regulatory domain changed to country: US
>[640266.372085] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[640266.372087] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[640266.372089] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[640266.372091] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640266.372093] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640266.372095] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640266.372097] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[640268.056103] PM: Syncing filesystems ... done.
>[640268.348275] PM: Preparing system for mem sleep
>[640269.051939] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[640269.063504] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[640269.074414] PM: Entering mem sleep
>[640269.074526] Suspending console(s) (use no_console_suspend to debug)
>[640269.075049] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[640269.075130] sd 0:0:0:0: [sda] Stopping disk
>[640269.123662] ACPI handle has no context!
>[640270.670249] PM: suspend of devices complete after 1598.670 msecs
>[640270.670482] PM: late suspend of devices complete after 0.229 msecs
>[640270.670739] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[640270.692309] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[640270.725126] PM: noirq suspend of devices complete after 54.743 msecs
>[640270.725302] ACPI: Preparing to enter system sleep state S3
>[640270.728586] PM: Saving platform NVS memory
>[640270.730385] Disabling non-boot CPUs ...
>[640270.730727] Broke affinity for irq 44
>[640270.731941] smpboot: CPU 1 is now offline
>[640270.733919] smpboot: CPU 2 is now offline
>[640270.734609] Broke affinity for irq 23
>[640270.735633] smpboot: CPU 3 is now offline
>[640270.736110] Extended CMOS year: 2000
>[640270.736837] ACPI: Low-level resume complete
>[640270.736896] PM: Restoring platform NVS memory
>[640270.737399] Extended CMOS year: 2000
>[640270.737434] CPU0: Thermal monitoring handled by SMI
>[640270.737660] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[640270.737692] Enabling non-boot CPUs ...
>[640270.737826] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[640270.748851] CPU1: Thermal monitoring handled by SMI
>[640270.752445] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[640270.752458] CPU1 is up
>[640270.752519] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[640270.763542] CPU2: Thermal monitoring handled by SMI
>[640270.766325] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[640270.766329] CPU2 is up
>[640270.766386] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[640270.777408] CPU3: Thermal monitoring handled by SMI
>[640270.780239] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[640270.780244] CPU3 is up
>[640270.782959] ACPI: Waking up from system sleep state S3
>[640270.832234] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[640270.909224] PM: noirq resume of devices complete after 121.161 msecs
>[640270.909291] PM: early resume of devices complete after 0.038 msecs
>[640270.909361] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[640270.909410] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[640270.909431] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[640270.909438] pci 0000:00:1e.0: setting latency timer to 64
>[640270.909458] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[640270.909463] ahci 0000:00:1f.2: setting latency timer to 64
>[640270.909605] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[640270.909643] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[640270.909655] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[640270.911524] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[640270.912949] mei 0000:00:16.0: wd: failed to find the client
>[640270.933016] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[640270.933114] radeon 0000:02:00.0: WB enabled
>[640270.933118] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[640270.979729] [drm] ring test on 0 succeeded in 1 usecs
>[640270.979750] [drm] ib test on ring 0 succeeded in 0 usecs
>[640271.143790] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[640271.215396] ata5: SATA link down (SStatus 0 SControl 300)
>[640271.217438] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[640271.245236] ata2.00: configured for UDMA/100
>[640271.409040] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[640271.461948] firewire_core 0000:07:00.3: rediscovered device fw0
>[640273.707599] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[640273.717195] ata1.00: configured for UDMA/133
>[640273.717357] sd 0:0:0:0: [sda] Starting disk
>[640273.719924] Extended CMOS year: 2000
>[640273.740059] PM: resume of devices complete after 2836.299 msecs
>[640273.740190] PM: Finishing wakeup.
>[640273.742791] usb 2-1.1: USB disconnect, device number 23
>[640273.740191] Restarting tasks ... done.
>[640273.788624] video LNXVIDEO:00: Restoring backlight state
>[640273.897568] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[640273.905158] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[640274.026709] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[640274.085140] r8169 0000:09:00.0: p12p1: link down
>[640274.085185] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[640279.443111] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640279.495722] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640279.517868] wlan0: authenticated
>[640279.519147] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[640279.719754] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[640279.920358] wlan0: associate with 20:cf:30:c6:2e:84 (try 3/3)
>[640280.121031] wlan0: association with 20:cf:30:c6:2e:84 timed out
>[640282.850828] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640282.861132] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640282.877146] wlan0: authenticated
>[640282.877588] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[640282.925851] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[640282.932798] wlan0: associated
>[640282.932839] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[640290.134711] cfg80211: Calling CRDA to update world regulatory domain
>[640290.144210] cfg80211: World regulatory domain updated:
>[640290.144216] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[640290.144221] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640290.144225] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[640290.144228] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[640290.144232] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640290.144235] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640290.144265] cfg80211: Calling CRDA for country: US
>[640290.148937] cfg80211: Regulatory domain changed to country: US
>[640290.148942] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[640290.148947] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[640290.148950] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[640290.148954] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640290.148957] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640290.148961] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640290.148964] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[640292.886069] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640292.897830] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640293.097644] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[640293.102924] wlan0: authenticated
>[640293.103588] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[640293.304244] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[640293.504800] wlan0: associate with 20:cf:30:c6:2e:84 (try 3/3)
>[640293.522729] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[640293.528857] wlan0: associated
>[640296.462590] r8169 0000:09:00.0: p12p1: link up
>[640296.462606] IPv6: ADDRCONF(NETDEV_CHANGE): p12p1: link becomes ready
>[640297.557747] r8169 0000:09:00.0: p12p1: link down
>[640299.939710] r8169 0000:09:00.0: p12p1: link up
>[640302.388191] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[640302.486125] cfg80211: Calling CRDA to update world regulatory domain
>[640302.493580] cfg80211: World regulatory domain updated:
>[640302.493588] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[640302.493594] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640302.493600] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[640302.493606] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[640302.493610] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640302.493615] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640302.493651] cfg80211: Calling CRDA for country: US
>[640302.499466] cfg80211: Regulatory domain changed to country: US
>[640302.499470] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[640302.499472] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[640302.499475] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[640302.499477] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640302.499479] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640302.499480] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640302.499482] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[640307.255614] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640307.267331] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640307.467519] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[640307.667702] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[640307.867528] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[640310.582047] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640310.592485] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640310.791776] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[640310.991723] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[640310.994692] wlan0: authenticated
>[640310.995006] wlan0: waiting for beacon from 20:cf:30:c6:2e:84
>[640313.855851] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640313.866469] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640314.065663] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[640314.265676] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[640314.465616] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[640317.201360] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640317.211608] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640317.224318] wlan0: authenticated
>[640317.224713] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[640317.424670] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[640317.624686] wlan0: associate with 20:cf:30:c6:2e:84 (try 3/3)
>[640317.824683] wlan0: association with 20:cf:30:c6:2e:84 timed out
>[640320.569713] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640320.580105] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640320.779261] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[640320.979271] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[640320.981152] wlan0: authenticated
>[640320.982259] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[640321.182298] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[640321.190454] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[640321.197401] wlan0: associated
>[640329.270374] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[640329.291007] cfg80211: Calling CRDA to update world regulatory domain
>[640329.302494] cfg80211: World regulatory domain updated:
>[640329.302498] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[640329.302500] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640329.302501] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[640329.302503] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[640329.302504] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640329.302506] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640329.302524] cfg80211: Calling CRDA for country: US
>[640329.306163] cfg80211: Regulatory domain changed to country: US
>[640329.306168] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[640329.306173] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[640329.306177] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[640329.306180] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640329.306184] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640329.306187] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[640329.306191] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[640335.409105] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640335.420058] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640335.438709] wlan0: authenticated
>[640335.439099] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[640335.639324] wlan0: associate with 20:cf:30:c6:2e:84 (try 2/3)
>[640335.839417] wlan0: associate with 20:cf:30:c6:2e:84 (try 3/3)
>[640336.039620] wlan0: association with 20:cf:30:c6:2e:84 timed out
>[640338.806719] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640338.817143] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640339.017215] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[640339.217399] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[640339.231715] wlan0: authenticated
>[640339.232067] wlan0: waiting for beacon from 20:cf:30:c6:2e:84
>[640342.117345] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640342.128087] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640342.327880] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[640342.528050] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[640342.533652] wlan0: authenticated
>[640342.533939] wlan0: waiting for beacon from 20:cf:30:c6:2e:84
>[640345.390127] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640345.400790] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640345.600961] wlan0: send auth to 20:cf:30:c6:2e:84 (try 2/3)
>[640345.801191] wlan0: send auth to 20:cf:30:c6:2e:84 (try 3/3)
>[640346.001359] wlan0: authentication with 20:cf:30:c6:2e:84 timed out
>[640356.334912] wlan0: authenticate with 20:cf:30:c6:2e:84
>[640356.347599] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[640356.349483] wlan0: authenticated
>[640356.349770] wlan0: waiting for beacon from 20:cf:30:c6:2e:84
>[640356.449440] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[640356.452812] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[640356.456276] wlan0: associated
>[658997.142344] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[658997.178986] cfg80211: Calling CRDA to update world regulatory domain
>[658997.206993] cfg80211: World regulatory domain updated:
>[658997.207000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[658997.207003] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[658997.207005] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[658997.207007] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[658997.207009] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[658997.207011] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[658997.207028] cfg80211: Calling CRDA for country: US
>[658997.211069] cfg80211: Regulatory domain changed to country: US
>[658997.211074] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[658997.211076] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[658997.211078] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[658997.211081] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[658997.211083] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[658997.211085] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[658997.211087] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[658998.692614] PM: Syncing filesystems ... done.
>[658999.076577] PM: Preparing system for mem sleep
>[658999.758700] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[658999.770000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[658999.780925] PM: Entering mem sleep
>[658999.781022] Suspending console(s) (use no_console_suspend to debug)
>[658999.781383] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[658999.781452] sd 0:0:0:0: [sda] Stopping disk
>[658999.783519] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[658999.827906] ACPI handle has no context!
>[659001.582536] PM: suspend of devices complete after 1804.875 msecs
>[659001.582747] PM: late suspend of devices complete after 0.208 msecs
>[659001.582974] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[659001.604452] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[659001.637261] PM: noirq suspend of devices complete after 54.615 msecs
>[659001.637504] ACPI: Preparing to enter system sleep state S3
>[659001.640729] PM: Saving platform NVS memory
>[659001.642449] Disabling non-boot CPUs ...
>[659001.642778] Broke affinity for irq 44
>[659001.643817] smpboot: CPU 1 is now offline
>[659001.645700] smpboot: CPU 2 is now offline
>[659001.646421] Broke affinity for irq 23
>[659001.647443] smpboot: CPU 3 is now offline
>[659001.647933] Extended CMOS year: 2000
>[659001.648661] ACPI: Low-level resume complete
>[659001.648721] PM: Restoring platform NVS memory
>[659001.649223] Extended CMOS year: 2000
>[659001.649258] CPU0: Thermal monitoring handled by SMI
>[659001.649483] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[659001.649527] Enabling non-boot CPUs ...
>[659001.649651] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[659001.660675] CPU1: Thermal monitoring handled by SMI
>[659001.664264] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[659001.664269] CPU1 is up
>[659001.664329] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[659001.675353] CPU2: Thermal monitoring handled by SMI
>[659001.678152] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[659001.678157] CPU2 is up
>[659001.678212] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[659001.689236] CPU3: Thermal monitoring handled by SMI
>[659001.692058] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[659001.692064] CPU3 is up
>[659001.694754] ACPI: Waking up from system sleep state S3
>[659001.744369] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[659001.821367] PM: noirq resume of devices complete after 121.165 msecs
>[659001.821523] PM: early resume of devices complete after 0.039 msecs
>[659001.821581] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[659001.821623] pci 0000:00:1e.0: setting latency timer to 64
>[659001.821625] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[659001.821652] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[659001.821654] ahci 0000:00:1f.2: setting latency timer to 64
>[659001.821693] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[659001.821806] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[659001.821936] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[659001.821991] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[659001.822729] mei 0000:00:16.0: wd: failed to find the client
>[659001.823730] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[659001.845239] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[659001.845327] radeon 0000:02:00.0: WB enabled
>[659001.845331] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[659001.891899] [drm] ring test on 0 succeeded in 1 usecs
>[659001.891920] [drm] ib test on ring 0 succeeded in 0 usecs
>[659002.054045] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[659002.127589] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[659002.130576] ata5: SATA link down (SStatus 0 SControl 300)
>[659002.155349] ata2.00: configured for UDMA/100
>[659002.321197] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[659002.376097] firewire_core 0000:07:00.3: rediscovered device fw0
>[659004.619758] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[659004.626093] ata1.00: configured for UDMA/133
>[659004.626226] sd 0:0:0:0: [sda] Starting disk
>[659004.628130] Extended CMOS year: 2000
>[659004.648943] PM: resume of devices complete after 2832.927 msecs
>[659004.649071] PM: Finishing wakeup.
>[659004.649072] Restarting tasks ... done.
>[659004.677348] video LNXVIDEO:00: Restoring backlight state
>[659004.751574] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[659004.760639] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[659004.871046] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[659004.930475] r8169 0000:09:00.0: p12p1: link down
>[659004.930489] r8169 0000:09:00.0: p12p1: link down
>[659004.930524] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[659007.984553] r8169 0000:09:00.0: p12p1: link up
>[659007.984568] IPv6: ADDRCONF(NETDEV_CHANGE): p12p1: link becomes ready
>[659010.223342] wlan0: authenticate with 20:cf:30:c6:2e:84
>[659010.270775] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[659010.272690] wlan0: authenticated
>[659010.273283] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[659010.276629] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[659010.279191] wlan0: associated
>[659010.279244] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[664298.860113] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[664298.901423] cfg80211: Calling CRDA to update world regulatory domain
>[664298.960971] cfg80211: World regulatory domain updated:
>[664298.960976] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[664298.960979] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[664298.960981] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[664298.960983] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[664298.960985] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[664298.960987] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[664298.961004] cfg80211: Calling CRDA for country: US
>[664298.964372] cfg80211: Regulatory domain changed to country: US
>[664298.964377] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[664298.964382] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[664298.964386] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[664298.964389] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[664298.964393] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[664298.964396] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[664298.964399] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[664300.043404] PM: Syncing filesystems ... done.
>[664300.052697] PM: Preparing system for mem sleep
>[664300.730157] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[664300.741801] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[664300.752751] PM: Entering mem sleep
>[664300.752839] Suspending console(s) (use no_console_suspend to debug)
>[664300.753220] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[664300.753338] sd 0:0:0:0: [sda] Stopping disk
>[664300.755236] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[664300.799666] ACPI handle has no context!
>[664302.310882] PM: suspend of devices complete after 1560.929 msecs
>[664302.311090] PM: late suspend of devices complete after 0.204 msecs
>[664302.311324] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[664302.332792] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[664302.365611] PM: noirq suspend of devices complete after 54.624 msecs
>[664302.365841] ACPI: Preparing to enter system sleep state S3
>[664302.369066] PM: Saving platform NVS memory
>[664302.370786] Disabling non-boot CPUs ...
>[664302.371118] Broke affinity for irq 44
>[664302.372161] smpboot: CPU 1 is now offline
>[664302.374025] smpboot: CPU 2 is now offline
>[664302.374751] Broke affinity for irq 23
>[664302.375774] smpboot: CPU 3 is now offline
>[664302.376288] Extended CMOS year: 2000
>[664302.377015] ACPI: Low-level resume complete
>[664302.377074] PM: Restoring platform NVS memory
>[664302.377575] Extended CMOS year: 2000
>[664302.377610] CPU0: Thermal monitoring handled by SMI
>[664302.377833] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[664302.377877] Enabling non-boot CPUs ...
>[664302.378004] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[664302.389028] CPU1: Thermal monitoring handled by SMI
>[664302.392622] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[664302.392627] CPU1 is up
>[664302.392688] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[664302.403712] CPU2: Thermal monitoring handled by SMI
>[664302.406488] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[664302.406492] CPU2 is up
>[664302.406554] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[664302.417577] CPU3: Thermal monitoring handled by SMI
>[664302.420405] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[664302.420411] CPU3 is up
>[664302.423105] ACPI: Waking up from system sleep state S3
>[664302.472708] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[664302.549701] PM: noirq resume of devices complete after 121.165 msecs
>[664302.549855] PM: early resume of devices complete after 0.039 msecs
>[664302.549913] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[664302.549958] pci 0000:00:1e.0: setting latency timer to 64
>[664302.549963] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[664302.549981] ahci 0000:00:1f.2: setting latency timer to 64
>[664302.550010] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[664302.550031] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[664302.550214] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[664302.550228] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[664302.550311] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[664302.552055] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[664302.573674] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[664302.573768] radeon 0000:02:00.0: WB enabled
>[664302.573772] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[664302.605531] mei 0000:00:16.0: wd: failed to find the client
>[664302.620403] [drm] ring test on 0 succeeded in 1 usecs
>[664302.620425] [drm] ib test on ring 0 succeeded in 0 usecs
>[664302.782288] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[664302.853925] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[664302.855925] ata5: SATA link down (SStatus 0 SControl 300)
>[664302.881622] ata2.00: configured for UDMA/100
>[664303.049510] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[664303.100441] firewire_core 0000:07:00.3: rediscovered device fw0
>[664305.402986] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[664305.410469] ata1.00: configured for UDMA/133
>[664305.410612] sd 0:0:0:0: [sda] Starting disk
>[664305.412410] Extended CMOS year: 2000
>[664305.433372] PM: resume of devices complete after 2889.128 msecs
>[664305.433501] PM: Finishing wakeup.
>[664305.433502] Restarting tasks ... done.
>[664305.463138] video LNXVIDEO:00: Restoring backlight state
>[664305.497845] usb 2-1.1: new low-speed USB device number 24 using ehci_hcd
>[664305.554776] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[664305.562827] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[664305.587289] usb 2-1.1: New USB device found, idVendor=413c, idProduct=3012
>[664305.587295] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[664305.587299] usb 2-1.1: Product: Dell USB Optical Mouse
>[664305.587302] usb 2-1.1: Manufacturer: Dell
>[664305.591970] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input19
>[664305.593299] hid-generic 0003:413C:3012.0009: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[664305.678927] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[664305.737673] r8169 0000:09:00.0: p12p1: link down
>[664305.737725] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[664311.057966] wlan0: authenticate with 58:6d:8f:07:37:42
>[664311.074217] wlan0: send auth to 58:6d:8f:07:37:42 (try 1/3)
>[664311.076107] wlan0: authenticated
>[664311.076396] wlan0: waiting for beacon from 58:6d:8f:07:37:42
>[664311.080851] wlan0: associate with 58:6d:8f:07:37:42 (try 1/3)
>[664311.084367] wlan0: RX AssocResp from 58:6d:8f:07:37:42 (capab=0x411 status=0 aid=4)
>[664311.086923] wlan0: associated
>[664311.086977] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[694325.998505] usb 2-1.1: USB disconnect, device number 24
>[695808.883539] usb 2-1.1: new low-speed USB device number 25 using ehci_hcd
>[695808.972867] usb 2-1.1: New USB device found, idVendor=413c, idProduct=3012
>[695808.972872] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[695808.972875] usb 2-1.1: Product: Dell USB Optical Mouse
>[695808.972878] usb 2-1.1: Manufacturer: Dell
>[695808.976262] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input20
>[695808.976999] hid-generic 0003:413C:3012.000A: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[696619.216492] wlan0: deauthenticating from 58:6d:8f:07:37:42 by local choice (reason=3)
>[696619.259915] cfg80211: Calling CRDA to update world regulatory domain
>[696619.524487] cfg80211: World regulatory domain updated:
>[696619.524492] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[696619.524495] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[696619.524497] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[696619.524500] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[696619.524502] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[696619.524504] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[696619.524518] cfg80211: Calling CRDA for country: US
>[696619.527066] cfg80211: Regulatory domain changed to country: US
>[696619.527069] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[696619.527071] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[696619.527072] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[696619.527074] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[696619.527075] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[696619.527077] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[696619.527078] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[696621.105617] PM: Syncing filesystems ... done.
>[696621.372394] PM: Preparing system for mem sleep
>[696622.062584] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[696622.073857] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[696622.084809] PM: Entering mem sleep
>[696622.084910] Suspending console(s) (use no_console_suspend to debug)
>[696622.085314] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[696622.085385] sd 0:0:0:0: [sda] Stopping disk
>[696622.143677] ACPI handle has no context!
>[696623.777436] PM: suspend of devices complete after 1695.686 msecs
>[696623.777649] PM: late suspend of devices complete after 0.210 msecs
>[696623.777878] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[696623.799509] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[696623.832323] PM: noirq suspend of devices complete after 54.777 msecs
>[696623.832546] ACPI: Preparing to enter system sleep state S3
>[696623.835793] PM: Saving platform NVS memory
>[696623.837525] Disabling non-boot CPUs ...
>[696623.837864] Broke affinity for irq 44
>[696623.839090] smpboot: CPU 1 is now offline
>[696623.841024] smpboot: CPU 2 is now offline
>[696623.841762] Broke affinity for irq 23
>[696623.842786] smpboot: CPU 3 is now offline
>[696623.843287] Extended CMOS year: 2000
>[696623.844012] ACPI: Low-level resume complete
>[696623.844073] PM: Restoring platform NVS memory
>[696623.844573] Extended CMOS year: 2000
>[696623.844609] CPU0: Thermal monitoring handled by SMI
>[696623.844832] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[696623.844866] Enabling non-boot CPUs ...
>[696623.844992] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[696623.856030] CPU1: Thermal monitoring handled by SMI
>[696623.859636] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[696623.859650] CPU1 is up
>[696623.859708] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[696623.870732] CPU2: Thermal monitoring handled by SMI
>[696623.873507] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[696623.873512] CPU2 is up
>[696623.873567] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[696623.884589] CPU3: Thermal monitoring handled by SMI
>[696623.887424] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[696623.887429] CPU3 is up
>[696623.890119] ACPI: Waking up from system sleep state S3
>[696623.939428] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[696624.016422] PM: noirq resume of devices complete after 121.161 msecs
>[696624.016489] PM: early resume of devices complete after 0.038 msecs
>[696624.016558] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[696624.016613] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[696624.016628] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[696624.016642] pci 0000:00:1e.0: setting latency timer to 64
>[696624.016660] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[696624.016665] ahci 0000:00:1f.2: setting latency timer to 64
>[696624.016820] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[696624.016845] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[696624.016894] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[696624.018778] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[696624.020211] mei 0000:00:16.0: wd: failed to find the client
>[696624.040452] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[696624.040546] radeon 0000:02:00.0: WB enabled
>[696624.040550] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[696624.087211] [drm] ring test on 0 succeeded in 1 usecs
>[696624.087231] [drm] ib test on ring 0 succeeded in 0 usecs
>[696624.250975] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[696624.322647] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[696624.324641] ata5: SATA link down (SStatus 0 SControl 300)
>[696624.350757] ata2.00: configured for UDMA/100
>[696624.516298] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[696624.567150] firewire_core 0000:07:00.3: rediscovered device fw0
>[696626.814737] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[696626.825805] ata1.00: configured for UDMA/133
>[696626.826000] sd 0:0:0:0: [sda] Starting disk
>[696626.847773] Extended CMOS year: 2000
>[696626.857091] PM: resume of devices complete after 2846.153 msecs
>[696626.857221] PM: Finishing wakeup.
>[696626.857222] Restarting tasks ... done.
>[696626.863342] usb 2-1.1: USB disconnect, device number 25
>[696626.901348] video LNXVIDEO:00: Restoring backlight state
>[696627.142702] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[696627.149679] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[696627.256145] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[696627.315410] r8169 0000:09:00.0: p12p1: link down
>[696627.315457] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[696632.682927] wlan0: authenticate with 20:cf:30:c6:2e:84
>[696632.710123] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[696632.712112] wlan0: authenticated
>[696632.713186] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[696632.716507] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[696632.720544] wlan0: associated
>[696632.720604] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[698407.702617] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[698407.737683] cfg80211: Calling CRDA to update world regulatory domain
>[698407.778491] cfg80211: World regulatory domain updated:
>[698407.778497] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[698407.778500] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[698407.778503] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[698407.778505] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[698407.778507] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[698407.778523] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[698407.778543] cfg80211: Calling CRDA for country: US
>[698407.783243] cfg80211: Regulatory domain changed to country: US
>[698407.783248] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[698407.783251] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[698407.783253] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[698407.783255] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[698407.783258] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[698407.783260] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[698407.783262] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[698409.289027] PM: Syncing filesystems ... done.
>[698409.293004] PM: Preparing system for mem sleep
>[698409.967685] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[698409.979374] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[698409.990361] PM: Entering mem sleep
>[698409.990460] Suspending console(s) (use no_console_suspend to debug)
>[698409.990812] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[698409.990873] sd 0:0:0:0: [sda] Stopping disk
>[698410.038225] ACPI handle has no context!
>[698411.600170] PM: suspend of devices complete after 1612.707 msecs
>[698411.600358] PM: late suspend of devices complete after 0.185 msecs
>[698411.600585] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[698411.622224] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[698411.655044] PM: noirq suspend of devices complete after 54.790 msecs
>[698411.655269] ACPI: Preparing to enter system sleep state S3
>[698411.658503] PM: Saving platform NVS memory
>[698411.660230] Disabling non-boot CPUs ...
>[698411.660561] Broke affinity for irq 44
>[698411.661768] smpboot: CPU 1 is now offline
>[698411.663797] smpboot: CPU 2 is now offline
>[698411.664479] Broke affinity for irq 23
>[698411.665510] smpboot: CPU 3 is now offline
>[698411.666049] Extended CMOS year: 2000
>[698411.666777] ACPI: Low-level resume complete
>[698411.666837] PM: Restoring platform NVS memory
>[698411.667340] Extended CMOS year: 2000
>[698411.667375] CPU0: Thermal monitoring handled by SMI
>[698411.667598] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[698411.667632] Enabling non-boot CPUs ...
>[698411.667761] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[698411.678785] CPU1: Thermal monitoring handled by SMI
>[698411.682385] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[698411.682392] CPU1 is up
>[698411.682455] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[698411.693478] CPU2: Thermal monitoring handled by SMI
>[698411.696250] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[698411.696255] CPU2 is up
>[698411.696322] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[698411.707344] CPU3: Thermal monitoring handled by SMI
>[698411.710195] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[698411.710200] CPU3 is up
>[698411.712932] ACPI: Waking up from system sleep state S3
>[698411.763142] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[698411.840137] PM: noirq resume of devices complete after 121.159 msecs
>[698411.840294] PM: early resume of devices complete after 0.039 msecs
>[698411.840353] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[698411.840396] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[698411.840415] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[698411.840419] pci 0000:00:1e.0: setting latency timer to 64
>[698411.840433] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[698411.840440] ahci 0000:00:1f.2: setting latency timer to 64
>[698411.840623] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[698411.840625] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[698411.840687] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[698411.842500] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[698411.843701] mei 0000:00:16.0: wd: failed to find the client
>[698411.864240] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[698411.864328] radeon 0000:02:00.0: WB enabled
>[698411.864331] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[698411.910896] [drm] ring test on 0 succeeded in 1 usecs
>[698411.910917] [drm] ib test on ring 0 succeeded in 0 usecs
>[698412.071612] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[698412.146369] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[698412.148362] ata5: SATA link down (SStatus 0 SControl 300)
>[698412.174041] ata2.00: configured for UDMA/100
>[698412.339984] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[698412.545199] firewire_core 0000:07:00.3: rediscovered device fw0
>[698414.639587] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[698414.647065] ata1.00: configured for UDMA/133
>[698414.647255] sd 0:0:0:0: [sda] Starting disk
>[698414.649740] Extended CMOS year: 2000
>[698414.669968] PM: resume of devices complete after 2835.196 msecs
>[698414.670094] PM: Finishing wakeup.
>[698414.670095] Restarting tasks ... done.
>[698414.696590] video LNXVIDEO:00: Restoring backlight state
>[698414.779385] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[698414.786399] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[698414.899728] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[698414.959144] r8169 0000:09:00.0: p12p1: link down
>[698414.959201] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[698420.281775] wlan0: authenticate with 20:cf:30:c6:2e:84
>[698420.316945] wlan0: send auth to 20:cf:30:c6:2e:84 (try 1/3)
>[698420.318848] wlan0: authenticated
>[698420.319374] wlan0: associate with 20:cf:30:c6:2e:84 (try 1/3)
>[698420.322725] wlan0: RX AssocResp from 20:cf:30:c6:2e:84 (capab=0x411 status=0 aid=1)
>[698420.325205] wlan0: associated
>[698420.325263] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[702961.122248] wlan0: deauthenticating from 20:cf:30:c6:2e:84 by local choice (reason=3)
>[702961.160240] cfg80211: Calling CRDA to update world regulatory domain
>[702961.196132] cfg80211: World regulatory domain updated:
>[702961.196138] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[702961.196142] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[702961.196146] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[702961.196149] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[702961.196151] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[702961.196154] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[702961.196176] cfg80211: Calling CRDA for country: US
>[702961.201546] cfg80211: Regulatory domain changed to country: US
>[702961.201550] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[702961.201552] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[702961.201553] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[702961.201555] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[702961.201556] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[702961.201558] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[702961.201559] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[702962.147324] PM: Syncing filesystems ... done.
>[702962.153386] PM: Preparing system for mem sleep
>[702962.826454] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[702962.837719] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[702962.848651] PM: Entering mem sleep
>[702962.848753] Suspending console(s) (use no_console_suspend to debug)
>[702962.849112] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[702962.849216] sd 0:0:0:0: [sda] Stopping disk
>[702962.895629] ACPI handle has no context!
>[702964.341753] PM: suspend of devices complete after 1495.762 msecs
>[702964.341923] PM: late suspend of devices complete after 0.167 msecs
>[702964.342131] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[702964.363804] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[702964.396604] PM: noirq suspend of devices complete after 54.783 msecs
>[702964.396836] ACPI: Preparing to enter system sleep state S3
>[702964.400072] PM: Saving platform NVS memory
>[702964.401772] Disabling non-boot CPUs ...
>[702964.402100] Broke affinity for irq 44
>[702964.403306] smpboot: CPU 1 is now offline
>[702964.405262] smpboot: CPU 2 is now offline
>[702964.405960] Broke affinity for irq 23
>[702964.406983] smpboot: CPU 3 is now offline
>[702964.407454] Extended CMOS year: 2000
>[702964.408180] ACPI: Low-level resume complete
>[702964.408239] PM: Restoring platform NVS memory
>[702964.408745] Extended CMOS year: 2000
>[702964.408780] CPU0: Thermal monitoring handled by SMI
>[702964.409004] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[702964.409045] Enabling non-boot CPUs ...
>[702964.409171] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[702964.420196] CPU1: Thermal monitoring handled by SMI
>[702964.423797] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[702964.423810] CPU1 is up
>[702964.423870] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[702964.434894] CPU2: Thermal monitoring handled by SMI
>[702964.437671] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[702964.437676] CPU2 is up
>[702964.437743] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[702964.448766] CPU3: Thermal monitoring handled by SMI
>[702964.451597] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[702964.451602] CPU3 is up
>[702964.454319] ACPI: Waking up from system sleep state S3
>[702964.505710] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[702964.582708] PM: noirq resume of devices complete after 121.164 msecs
>[702964.582862] PM: early resume of devices complete after 0.039 msecs
>[702964.582918] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[702964.582953] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[702964.582962] pci 0000:00:1e.0: setting latency timer to 64
>[702964.582987] ahci 0000:00:1f.2: setting latency timer to 64
>[702964.583011] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[702964.583045] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[702964.583228] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[702964.583232] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[702964.583307] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[702964.584958] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[702964.608243] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[702964.608336] radeon 0000:02:00.0: WB enabled
>[702964.608339] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[702964.637926] mei 0000:00:16.0: wd: failed to find the client
>[702964.654909] [drm] ring test on 0 succeeded in 1 usecs
>[702964.654931] [drm] ib test on ring 0 succeeded in 0 usecs
>[702964.814225] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[702964.888925] ata5: SATA link down (SStatus 0 SControl 300)
>[702964.890924] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[702964.919311] ata2.00: configured for UDMA/100
>[702965.082540] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[702965.134442] firewire_core 0000:07:00.3: rediscovered device fw0
>[702967.381099] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[702967.391814] ata1.00: configured for UDMA/133
>[702967.392008] sd 0:0:0:0: [sda] Starting disk
>[702967.393791] Extended CMOS year: 2000
>[702967.414760] PM: resume of devices complete after 2837.410 msecs
>[702967.414890] PM: Finishing wakeup.
>[702967.414891] Restarting tasks ... done.
>[702967.449778] video LNXVIDEO:00: Restoring backlight state
>[702967.479899] usb 2-1.1: new low-speed USB device number 26 using ehci_hcd
>[702967.560459] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[702967.567501] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[702967.571102] usb 2-1.1: New USB device found, idVendor=413c, idProduct=3012
>[702967.571107] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[702967.571110] usb 2-1.1: Product: Dell USB Optical Mouse
>[702967.571112] usb 2-1.1: Manufacturer: Dell
>[702967.574001] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input21
>[702967.574856] hid-generic 0003:413C:3012.000B: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
>[702967.684707] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[702967.743647] r8169 0000:09:00.0: p12p1: link down
>[702967.743690] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready
>[702973.247391] wlan0: authenticate with 58:6d:8f:07:37:42
>[702973.289147] wlan0: send auth to 58:6d:8f:07:37:42 (try 1/3)
>[702973.291031] wlan0: authenticated
>[702973.291513] wlan0: associate with 58:6d:8f:07:37:42 (try 1/3)
>[702973.296651] wlan0: RX AssocResp from 58:6d:8f:07:37:42 (capab=0x411 status=0 aid=4)
>[702973.302196] wlan0: associated
>[702973.302247] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[728765.529978] wlan0: deauthenticating from 58:6d:8f:07:37:42 by local choice (reason=3)
>[728765.566424] cfg80211: Calling CRDA to update world regulatory domain
>[728765.589005] cfg80211: World regulatory domain updated:
>[728765.589011] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[728765.589014] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[728765.589016] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[728765.589019] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[728765.589021] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[728765.589023] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[728765.589046] cfg80211: Calling CRDA for country: US
>[728765.596279] cfg80211: Regulatory domain changed to country: US
>[728765.596284] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[728765.596286] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[728765.596289] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[728765.596291] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[728765.596293] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[728765.596296] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[728765.596298] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[728767.097080] PM: Syncing filesystems ... done.
>[728767.302189] PM: Preparing system for mem sleep
>[728768.004992] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[728768.016641] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[728768.027572] PM: Entering mem sleep
>[728768.027666] Suspending console(s) (use no_console_suspend to debug)
>[728768.029062] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[728768.060385] sd 0:0:0:0: [sda] Stopping disk
>[728768.075501] ACPI handle has no context!
>[728769.713343] PM: suspend of devices complete after 1688.822 msecs
>[728769.713559] PM: late suspend of devices complete after 0.212 msecs
>[728769.713790] r8169 0000:09:00.0: wake-up capability enabled by ACPI
>[728769.735288] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[728769.768104] PM: noirq suspend of devices complete after 54.644 msecs
>[728769.768289] ACPI: Preparing to enter system sleep state S3
>[728769.771568] PM: Saving platform NVS memory
>[728769.773323] Disabling non-boot CPUs ...
>[728769.773660] Broke affinity for irq 44
>[728769.774875] smpboot: CPU 1 is now offline
>[728769.776792] smpboot: CPU 2 is now offline
>[728769.777468] Broke affinity for irq 23
>[728769.778494] smpboot: CPU 3 is now offline
>[728769.778973] Extended CMOS year: 2000
>[728769.779699] ACPI: Low-level resume complete
>[728769.779759] PM: Restoring platform NVS memory
>[728769.780255] Extended CMOS year: 2000
>[728769.780290] CPU0: Thermal monitoring handled by SMI
>[728769.780514] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
>[728769.780555] Enabling non-boot CPUs ...
>[728769.780682] smpboot: Booting Node 0 Processor 1 APIC 0x4
>[728769.791707] CPU1: Thermal monitoring handled by SMI
>[728769.795316] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
>[728769.795330] CPU1 is up
>[728769.795390] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[728769.806413] CPU2: Thermal monitoring handled by SMI
>[728769.809185] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
>[728769.809190] CPU2 is up
>[728769.809265] smpboot: Booting Node 0 Processor 3 APIC 0x5
>[728769.820288] CPU3: Thermal monitoring handled by SMI
>[728769.823121] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
>[728769.823126] CPU3 is up
>[728769.825827] ACPI: Waking up from system sleep state S3
>[728769.875206] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[728769.952196] PM: noirq resume of devices complete after 121.160 msecs
>[728769.952352] PM: early resume of devices complete after 0.039 msecs
>[728769.952409] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[728769.952462] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[728769.952487] mei 0000:00:16.0: irq 43 for MSI/MSI-X
>[728769.952490] pci 0000:00:1e.0: setting latency timer to 64
>[728769.952519] ahci 0000:00:1f.2: setting latency timer to 64
>[728769.952523] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[728769.952651] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
>[728769.952689] r8169 0000:09:00.0: wake-up capability disabled by ACPI
>[728769.952725] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
>[728769.953823] mei 0000:00:16.0: wd: failed to find the client
>[728769.954583] [drm] probing gen 2 caps for device 8086:45 = 1/0
>[728769.976092] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[728769.976183] radeon 0000:02:00.0: WB enabled
>[728769.976187] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88014d6fec00
>[728770.022762] [drm] ring test on 0 succeeded in 1 usecs
>[728770.022783] [drm] ib test on ring 0 succeeded in 0 usecs
>[728770.258424] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[728770.260413] ata5: SATA link down (SStatus 0 SControl 300)
>[728770.286171] ata2.00: configured for UDMA/100
>[728770.363356] usb 2-1.1: reset low-speed USB device number 26 using ehci_hcd
>[728770.452029] sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>[728770.656272] firewire_core 0000:07:00.3: rediscovered device fw0
>[728770.699712] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
>[728772.394268] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[728772.400842] ata1.00: configured for UDMA/133
>[728772.401020] sd 0:0:0:0: [sda] Starting disk
>[728772.403085] Extended CMOS year: 2000
>[728772.423637] PM: resume of devices complete after 2476.114 msecs
>[728772.423770] PM: Finishing wakeup.
>[728772.423771] Restarting tasks ... done.
>[728772.453641] video LNXVIDEO:00: Restoring backlight state
>[728772.587033] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
>[728772.601128] iwlwifi 0000:04:00.0: Radio type=0x1-0x3-0x1
>[728772.707756] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[728772.765780] r8169 0000:09:00.0: p12p1: link down
>[728772.765825] IPv6: ADDRCONF(NETDEV_UP): p12p1: link is not ready

Actions: View

Attachments on bug 894929: 677999 | 678000 | 678001 | 678002 | 678003 | 678004