Attachment 691810 Details for Bug 906952 – Boot up of 3.6.10-2.fc17.x86_64 via serial port

Boot up of 3.6.10-2.fc17.x86_64 via serial port

mcp.3.6.10-2.log (text/plain), 65.18 KB, created by Larkin Lowrey on 2013-02-02 00:33:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Larkin Lowrey

Created: 2013-02-02 00:33:09 UTC

Size: 65.18 KB

patch

obsolete

>Loading Fedora (3.6.10-2.fc17.x86_64)
>Loading initial ramdisk ...
>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 3.6.10-2.fc17.x86_64 (mockbuild@) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #1 SMP Tue Dec 11 18:07:34 UTC 2012
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.6.10-2.fc17.x86_64 root=/dev/mapper/Flash-Root ro console=tty0 console=ttyS0,115200,n8r rd.md.uuid=ddbecc3a:1d7c9c74:fde10943:0c762e76 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000953ff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000095400-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d7d80fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000d7de0000-0x00000000d7de2fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000d7de3000-0x00000000d7deffff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000d7df0000-0x00000000d7dfffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000227ffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI 2.4 present.
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x228000 max_arch_pfn = 0x400000000
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] total RAM covered: 3454M
>[    0.000000] Found optimal setting for mtrr clean up
>[    0.000000]  gran_size: 64K 	chunk_size: 1G 	num_reg: 4  	lose cover RAM: 0G
>[    0.000000] e820: last_pfn = 0xd7d81 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000f5d80-0x000f5d8f] mapped at [ffff8800000f5d80]
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0xd7d80fff]
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x227ffffff]
>[    0.000000] RAMDISK: [mem 0x35d00000-0x36e77fff]
>[    0.000000] ACPI: RSDP 00000000000f7720 00014 (v00 GBT   )
>[    0.000000] ACPI: RSDT 00000000d7de3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] ACPI: FACP 00000000d7de3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] ACPI: DSDT 00000000d7de30c0 07477 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
>[    0.000000] ACPI: FACS 00000000d7de0000 00040
>[    0.000000] ACPI: SSDT 00000000d7dea600 0088C (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
>[    0.000000] ACPI: HPET 00000000d7deaec0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>[    0.000000] ACPI: MCFG 00000000d7deaf00 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] ACPI: APIC 00000000d7dea540 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] Scanning NUMA topology in Northbridge 24
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000227ffffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x227ffffff]
>[    0.000000]   NODE_DATA [mem 0x227fec000-0x227ffffff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x227ffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00010000-0x00094fff]
>[    0.000000]   node   0: [mem 0x00100000-0xd7d80fff]
>[    0.000000]   node   0: [mem 0x100000000-0x227ffffff]
>[    0.000000] ACPI: PM-Timer IO Port: 0x4008
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: 0000000000095000 - 0000000000096000
>[    0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>[    0.000000] PM: Registered nosave memory: 00000000d7d81000 - 00000000d7de0000
>[    0.000000] PM: Registered nosave memory: 00000000d7de0000 - 00000000d7de3000
>[    0.000000] PM: Registered nosave memory: 00000000d7de3000 - 00000000d7df0000
>[    0.000000] PM: Registered nosave memory: 00000000d7df0000 - 00000000d7e00000
>[    0.000000] PM: Registered nosave memory: 00000000d7e00000 - 00000000e0000000
>[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
>[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
>[    0.000000] e820: [mem 0xf0000000-0xfebfffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880227c00000 s84288 r8192 d22208 u262144
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2061056
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.6.10-2.fc17.x86_64 root=/dev/mapper/Flash-Root ro console=tty0 console=ttyS0,115200,n8r rd.md.uuid=ddbecc3a:1d7c9c74:fde10943:0c762e76 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] __ex_table already sorted, skipping sort
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Node 0: aperture @ cc000000 size 32 MB
>[    0.000000] Aperture pointing to e820 RAM. Ignoring.
>[    0.000000] Your BIOS doesn't leave a aperture memory hole
>[    0.000000] Please enable the IOMMU option in the BIOS setup
>[    0.000000] This costs you 64 MB of RAM
>[    0.000000] Mapping aperture over 65536 KB of RAM @ cc000000
>[    0.000000] PM: Registered nosave memory: 00000000cc000000 - 00000000d0000000
>[    0.000000] Memory: 8087832k/9043968k available (6315k kernel code, 658408k absent, 297728k reserved, 6887k data, 1032k init)
>[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
>[    0.000000] NR_IRQS:8448 nr_irqs:744 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] console [ttyS0] enabled
>[    0.000000] allocated 33554432 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.001000] tsc: Fast TSC calibration using PIT
>[    0.002000] tsc: Detected 3214.126 MHz processor
>[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6428.25 BogoMIPS (lpj=3214126)
>[    0.010693] pid_max: default: 32768 minimum: 301
>[    0.015362] Security Framework initialized
>[    0.019494] SELinux:  Initializing.
>[    0.023585] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.032992] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.041045] Mount-cache hash table entries: 256
>[    0.045784] Initializing cgroup subsys cpuacct
>[    0.050263] Initializing cgroup subsys memory
>[    0.054664] Initializing cgroup subsys devices
>[    0.059136] Initializing cgroup subsys freezer
>[    0.063608] Initializing cgroup subsys net_cls
>[    0.068080] Initializing cgroup subsys blkio
>[    0.072381] Initializing cgroup subsys perf_event
>[    0.077134] CPU: Physical Processor ID: 0
>[    0.081177] CPU: Processor Core ID: 0
>[    0.084871] mce: CPU supports 6 MCE banks
>[    0.088917] LVT offset 0 assigned for vector 0xf9
>[    0.093656] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
>[    0.093656] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
>[    0.093656] tlb_flushall_shift is 0xffffffff
>[    0.109196] ACPI: Core revision 20120711
>[    0.127352] ftrace: allocating 23454 entries in 92 pages
>[    0.141290] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.157303] smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
>[    0.265846] Performance Events: AMD PMU driver.
>[    0.270457] ... version:                0
>[    0.274501] ... bit width:              48
>[    0.278624] ... generic registers:      4
>[    0.282665] ... value mask:             0000ffffffffffff
>[    0.288003] ... max period:             00007fffffffffff
>[    0.293340] ... fixed-purpose events:   0
>[    0.297380] ... event mask:             000000000000000f
>[    0.303083] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.311214] smpboot: Booting Node   0, Processors  #1 #2 #3
>[    0.356273] Brought up 4 CPUs
>[    0.359501] smpboot: Total of 4 processors activated (25713.00 BogoMIPS)
>[    0.370811] devtmpfs: initialized
>[    0.374358] PM: Registering ACPI NVS region [mem 0xd7de0000-0xd7de2fff] (12288 bytes)
>[    0.382739] atomic64 test passed for x86-64 platform with CX8 and with SSE
>[    0.389656] RTC time: 22:05:18, date: 02/01/13
>[    0.394170] NET: Registered protocol family 16
>[    0.398730] TOM: 00000000d8000000 aka 3456M
>[    0.402954] TOM2: 0000000228000000 aka 8832M
>[    0.407326] ACPI: bus type pci registered
>[    0.411403] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.420737] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.436586] PCI: Using configuration type 1 for base access
>[    0.442827] bio: create slab <bio-0> at 0
>[    0.446948] ACPI: Added _OSI(Module Device)
>[    0.451163] ACPI: Added _OSI(Processor Device)
>[    0.455638] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.460367] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.470159] ACPI: Interpreter enabled
>[    0.473861] ACPI: (supports S0 S3 S4 S5)
>[    0.477998] ACPI: Using IOAPIC for interrupt routing
>[    0.508704] ACPI: No dock devices found.
>[    0.512666] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.522255] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.528536] PCI host bridge to bus 0000:00
>[    0.532666] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.538183] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.544384] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.550585] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.557482] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
>[    0.564376] pci_bus 0000:00: root bus resource [mem 0xd7f00000-0xfebfffff]
>[    0.572712] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.579264] pci 0000:00:02.0: PCI bridge to [bus 02-05]
>[    0.584719] pci 0000:02:00.0: PCI bridge to [bus 03-05]
>[    0.591242] pci 0000:03:04.0: PCI bridge to [bus 04]
>[    0.598229] pci 0000:03:05.0: PCI bridge to [bus 05]
>[    0.605216] pci 0000:00:06.0: PCI bridge to [bus 06]
>[    0.612202] pci 0000:00:07.0: PCI bridge to [bus 07]
>[    0.619190] pci 0000:00:0a.0: PCI bridge to [bus 08]
>[    0.624258] pci 0000:00:14.4: PCI bridge to [bus 09] (subtractive decode)
>[    0.631373]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
>[    0.639062]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
>[    0.653405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>[    0.661347] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>[    0.669289] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>[    0.677215] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>[    0.685149] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>[    0.693072] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>[    0.700995] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>[    0.708920] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>[    0.716912] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.725032] vgaarb: loaded
>[    0.727775] vgaarb: bridge control possible 0000:01:05.0
>[    0.733169] SCSI subsystem initialized
>[    0.736948] ACPI: bus type scsi registered
>[    0.741148] ACPI: bus type usb registered
>[    0.745202] usbcore: registered new interface driver usbfs
>[    0.750715] usbcore: registered new interface driver hub
>[    0.756097] usbcore: registered new device driver usb
>[    0.761247] PCI: Using ACPI for IRQ routing
>[    0.773362] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
>[    0.782217] NetLabel: Initializing
>[    0.785652] NetLabel:  domain hash size = 128
>[    0.790039] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.795035] NetLabel:  unlabeled traffic allowed by default
>[    0.800669] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>[    0.806046] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>[    0.813938] Switching to clocksource hpet
>[    0.822486] pnp: PnP ACPI init
>[    0.825588] ACPI: bus type pnp registered
>[    0.829779] system 00:01: [io  0x04d0-0x04d1] has been reserved
>[    0.835726] system 00:01: [io  0x0220-0x0225] has been reserved
>[    0.841677] system 00:01: [io  0x0290-0x0294] has been reserved
>[    0.867046] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>[    0.879693] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
>[    0.893010] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
>[    0.906332] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:06:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
>[    0.919657] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:07:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
>[    0.932979] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:08:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
>[    0.946319] system 00:02: [io  0x4100-0x411f] has been reserved
>[    0.952269] system 00:02: [io  0x0228-0x022f] has been reserved
>[    0.958218] system 00:02: [io  0x040b] has been reserved
>[    0.963555] system 00:02: [io  0x04d6] has been reserved
>[    0.968893] system 00:02: [io  0x0c00-0x0c01] has been reserved
>[    0.974837] system 00:02: [io  0x0c14] has been reserved
>[    0.980174] system 00:02: [io  0x0c50-0x0c52] has been reserved
>[    0.986117] system 00:02: [io  0x0c6c-0x0c6d] has been reserved
>[    0.992068] system 00:02: [io  0x0c6f] has been reserved
>[    0.997406] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
>[    1.003349] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
>[    1.009292] system 00:02: [io  0x0cd4-0x0cdf] has been reserved
>[    1.015244] system 00:02: [io  0x4000-0x40fe] has been reserved
>[    1.021195] system 00:02: [io  0x4210-0x4217] has been reserved
>[    1.027139] system 00:02: [io  0x0b00-0x0b0f] has been reserved
>[    1.033091] system 00:02: [io  0x0b10-0x0b1f] has been reserved
>[    1.039042] system 00:02: [io  0x0b20-0x0b3f] has been reserved
>[    1.044994] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
>[    1.052780] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
>[    1.059539] pnp 00:0a: disabling [mem 0x000da400-0x000dbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>[    1.071558] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>[    1.083571] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>[    1.095587] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>[    1.107604] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>[    1.119621] pnp 00:0a: disabling [mem 0x00100000-0xd7ddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>[    1.131661] pnp 00:0a: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe00fffff]; adding more reservations
>[    1.147342] system 00:0a: [mem 0xd7de0000-0xd7deffff] could not be reserved
>[    1.154331] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
>[    1.160972] system 00:0a: [mem 0xd7df0000-0xd7dfffff] has been reserved
>[    1.167609] system 00:0a: [mem 0xd7e00000-0xd7efffff] could not be reserved
>[    1.174599] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    1.181588] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
>[    1.188577] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
>[    1.195227] pnp: PnP ACPI: found 11 devices
>[    1.199442] ACPI: ACPI bus type pnp unregistered
>[    1.210264] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    1.215257] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
>[    1.221382] pci 0000:00:01.0:   bridge window [mem 0xfdd00000-0xfdefffff]
>[    1.228198] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
>[    1.235981] pci 0000:04:00.0: BAR 6: assigned [mem 0xfd900000-0xfd90ffff pref]
>[    1.243236] pci 0000:03:04.0: PCI bridge to [bus 04]
>[    1.248234] pci 0000:03:04.0:   bridge window [io  0xe000-0xefff]
>[    1.254359] pci 0000:03:04.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
>[    1.261176] pci 0000:03:04.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
>[    1.268957] pci 0000:05:00.0: BAR 6: assigned [mem 0xfd800000-0xfd80ffff pref]
>[    1.276213] pci 0000:03:05.0: PCI bridge to [bus 05]
>[    1.281208] pci 0000:03:05.0:   bridge window [io  0xd000-0xdfff]
>[    1.287328] pci 0000:03:05.0:   bridge window [mem 0xfda00000-0xfdafffff]
>[    1.294144] pci 0000:03:05.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
>[    1.301925] pci 0000:02:00.0: PCI bridge to [bus 03-05]
>[    1.307178] pci 0000:02:00.0:   bridge window [io  0xd000-0xefff]
>[    1.313294] pci 0000:02:00.0:   bridge window [mem 0xfda00000-0xfdbfffff]
>[    1.320105] pci 0000:02:00.0:   bridge window [mem 0xfd800000-0xfd9fffff 64bit pref]
>[    1.327886] pci 0000:00:02.0: PCI bridge to [bus 02-05]
>[    1.333141] pci 0000:00:02.0:   bridge window [io  0xd000-0xefff]
>[    1.339264] pci 0000:00:02.0:   bridge window [mem 0xfda00000-0xfdcfffff]
>[    1.346081] pci 0000:00:02.0:   bridge window [mem 0xfd800000-0xfd9fffff 64bit pref]
>[    1.353863] pci 0000:06:00.0: BAR 6: assigned [mem 0xfd600000-0xfd60ffff pref]
>[    1.361118] pci 0000:00:06.0: PCI bridge to [bus 06]
>[    1.366115] pci 0000:00:06.0:   bridge window [io  0xc000-0xcfff]
>[    1.372241] pci 0000:00:06.0:   bridge window [mem 0xfd700000-0xfd7fffff]
>[    1.379057] pci 0000:00:06.0:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
>[    1.386841] pci 0000:07:00.0: BAR 6: assigned [mem 0xfd400000-0xfd40ffff pref]
>[    1.394095] pci 0000:00:07.0: PCI bridge to [bus 07]
>[    1.399090] pci 0000:00:07.0:   bridge window [io  0xb000-0xbfff]
>[    1.405209] pci 0000:00:07.0:   bridge window [mem 0xfd500000-0xfd5fffff]
>[    1.412025] pci 0000:00:07.0:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
>[    1.419808] pci 0000:08:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
>[    1.427062] pci 0000:00:0a.0: PCI bridge to [bus 08]
>[    1.432060] pci 0000:00:0a.0:   bridge window [io  0xa000-0xafff]
>[    1.438183] pci 0000:00:0a.0:   bridge window [mem 0xfd100000-0xfd1fffff]
>[    1.444994] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>[    1.452774] pci 0000:00:14.4: PCI bridge to [bus 09]
>[    1.457770] pci 0000:00:14.4:   bridge window [io  0x8000-0x8fff]
>[    1.463895] pci 0000:00:14.4:   bridge window [mem 0xfd300000-0xfd3fffff]
>[    1.470713] pci 0000:00:14.4:   bridge window [mem 0xfd200000-0xfd2fffff pref]
>[    1.478092] NET: Registered protocol family 2
>[    1.483071] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>[    1.492494] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    1.499452] TCP: Hash tables configured (established 524288 bind 65536)
>[    1.506121] TCP: reno registered
>[    1.509784] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    1.515943] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    1.522598] NET: Registered protocol family 1
>[    1.526998] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
>[    1.908088] Unpacking initramfs...
>[    2.168269] Freeing initrd memory: 17888k freed
>[    2.177507] PCI-DMA: Disabling AGP.
>[    2.181134] PCI-DMA: aperture base @ cc000000 size 65536 KB
>[    2.186740] PCI-DMA: using GART IOMMU.
>[    2.190528] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>[    2.200460] LVT offset 1 assigned for vector 0x400
>[    2.205296] IBS: LVT offset 1 assigned
>[    2.209122] perf: AMD IBS detected (0x0000001f)
>[    2.214143] audit: initializing netlink socket (disabled)
>[    2.219590] type=2000 audit(1359756318.678:1): initialized
>[    2.239563] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    2.247573] VFS: Disk quotas dquot_6.5.2
>[    2.251562] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    2.258345] msgmni has been set to 15960
>[    2.262966] alg: No test for stdrng (krng)
>[    2.267130] NET: Registered protocol family 38
>[    2.271648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    2.279138] io scheduler noop registered
>[    2.283098] io scheduler deadline registered
>[    2.287426] io scheduler cfq registered (default)
>[    2.292792] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    2.298407] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    2.305053] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    2.311749] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>[    2.319962] ACPI: Power Button [PWRB]
>[    2.323685] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>[    2.331120] ACPI: Power Button [PWRF]
>[    2.379482] GHES: HEST is not enabled!
>[    2.383347] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    2.410179] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    2.436959] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    2.442820] Non-volatile memory driver v1.3
>[    2.447047] Linux agpgart interface v0.103
>[    2.451716] loop: module loaded
>[    2.455097] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>[    2.463318] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
>[    2.472230] scsi0 : ahci
>[    2.474898] scsi1 : ahci
>[    2.477545] scsi2 : ahci
>[    2.480195] scsi3 : ahci
>[    2.482839] scsi4 : ahci
>[    2.485487] scsi5 : ahci
>[    2.488084] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
>[    2.495516] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
>[    2.502949] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
>[    2.510378] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
>[    2.517810] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
>[    2.525239] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
>[    2.532892] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
>[    2.541028] ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
>[    2.549153] ahci 0000:06:00.0: port 0 can do FBS, forcing FBSCP
>[    2.555136] ahci 0000:06:00.0: port 1 can do FBS, forcing FBSCP
>[    2.561266] scsi6 : ahci
>[    2.563919] scsi7 : ahci
>[    2.566520] ata7: SATA max UDMA/133 abar m2048@0xfd7ff000 port 0xfd7ff100 irq 47
>[    2.573952] ata8: SATA max UDMA/133 abar m2048@0xfd7ff000 port 0xfd7ff180 irq 47
>[    2.581569] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
>[    2.589691] ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
>[    2.597813] ahci 0000:07:00.0: port 0 can do FBS, forcing FBSCP
>[    2.603794] ahci 0000:07:00.0: port 1 can do FBS, forcing FBSCP
>[    2.609910] scsi8 : ahci
>[    2.612542] scsi9 : ahci
>[    2.615146] ata9: SATA max UDMA/133 abar m2048@0xfd5ff000 port 0xfd5ff100 irq 48
>[    2.622581] ata10: SATA max UDMA/133 abar m2048@0xfd5ff000 port 0xfd5ff180 irq 48
>[    2.630182] libphy: Fixed MDIO Bus: probed
>[    2.634385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.640975] ehci_hcd 0000:00:12.2: EHCI Host Controller
>[    2.646300] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
>[    2.653733] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>[    2.662493] ehci_hcd 0000:00:12.2: debug port 1
>[    2.667073] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
>[    2.678497] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>[    2.684290] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.691104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.698356] usb usb1: Product: EHCI Host Controller
>[    2.703267] usb usb1: Manufacturer: Linux 3.6.10-2.fc17.x86_64 ehci_hcd
>[    2.709908] usb usb1: SerialNumber: 0000:00:12.2
>[    2.714647] hub 1-0:1.0: USB hub found
>[    2.718437] hub 1-0:1.0: 6 ports detected
>[    2.722574] ehci_hcd 0000:00:13.2: EHCI Host Controller
>[    2.727884] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
>[    2.735316] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>[    2.744064] ehci_hcd 0000:00:13.2: debug port 1
>[    2.748650] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
>[    2.760335] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>[    2.766131] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.772948] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.780211] usb usb2: Product: EHCI Host Controller
>[    2.785118] usb usb2: Manufacturer: Linux 3.6.10-2.fc17.x86_64 ehci_hcd
>[    2.791754] usb usb2: SerialNumber: 0000:00:13.2
>[    2.796481] hub 2-0:1.0: USB hub found
>[    2.800273] hub 2-0:1.0: 6 ports detected
>[    2.804389] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    2.810641] ohci_hcd 0000:00:12.0: OHCI Host Controller
>[    2.815961] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
>[    2.823429] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
>[    2.883132] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    2.889947] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.897201] usb usb3: Product: OHCI Host Controller
>[    2.902111] usb usb3: Manufacturer: Linux 3.6.10-2.fc17.x86_64 ohci_hcd
>[    2.908747] usb usb3: SerialNumber: 0000:00:12.0
>[    2.913490] hub 3-0:1.0: USB hub found
>[    2.917278] hub 3-0:1.0: 3 ports detected
>[    2.921407] ohci_hcd 0000:00:12.1: OHCI Host Controller
>[    2.926718] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
>[    2.934162] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
>[    2.991926] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.998156] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    3.004378] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.004386] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    3.004419] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    3.004450] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    3.004504] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    3.004630] ata1.00: ATA-8: OCZ-VERTEX, 1.7, max UDMA/133
>[    3.004632] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    3.004672] ata4.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA5C0, max UDMA/133
>[    3.004672] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    3.005967] ata4.00: configured for UDMA/133
>[    3.007795] ata6.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133
>[    3.007796] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    3.008105] ata1.00: configured for UDMA/133
>[    3.008256] scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX       1.7  PQ: 0 ANSI: 5
>[    3.008374] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    3.008439] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
>[    3.008540] sd 0:0:0:0: [sda] Write Protect is off
>[    3.008570] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.008898]  sda: sda1
>[    3.009121] sd 0:0:0:0: [sda] Attached SCSI disk
>[    3.009927] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133
>[    3.009928] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    3.011183] ata6.00: configured for UDMA/133
>[    3.014349] ata5.00: configured for UDMA/133
>[    3.016364] ata2.00: ATA-8: OCZ-AGILITY3, 2.25, max UDMA/133
>[    3.016365] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    3.026248] ata2.00: configured for UDMA/133
>[    3.026361] scsi 1:0:0:0: Direct-Access     ATA      OCZ-AGILITY3     2.25 PQ: 0 ANSI: 5
>[    3.026451] sd 1:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
>[    3.026473] sd 1:0:0:0: Attached scsi generic sg1 type 0
>[    3.026556] sd 1:0:0:0: [sdb] Write Protect is off
>[    3.026585] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.026925]  sdb: sdb1
>[    3.027120] sd 1:0:0:0: [sdb] Attached SCSI disk
>[    3.028098] ata3.00: ATA-8: Hitachi HDS722020ALA330, JKAOA28A, max UDMA/133
>[    3.028099] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    3.029739] ata3.00: configured for UDMA/133
>[    3.029863] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
>[    3.029969] sd 2:0:0:0: Attached scsi generic sg2 type 0
>[    3.029983] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[    3.030062] sd 2:0:0:0: [sdc] Write Protect is off
>[    3.030090] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.030095] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
>[    3.030190] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[    3.030204] sd 3:0:0:0: Attached scsi generic sg3 type 0
>[    3.030217] sd 3:0:0:0: [sdd] Write Protect is off
>[    3.030228] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.030305] scsi 4:0:0:0: Direct-Access     ATA      WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5
>[    3.030378] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[    3.030404] sd 4:0:0:0: Attached scsi generic sg4 type 0
>[    3.030468] sd 4:0:0:0: [sde] Write Protect is off
>[    3.030493] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.030511] scsi 5:0:0:0: Direct-Access     ATA      WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5
>[    3.030600] sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[    3.030605] sd 5:0:0:0: Attached scsi generic sg5 type 0
>[    3.030634] sd 5:0:0:0: [sdf] Write Protect is off
>[    3.030646] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.036451]  sdf: sdf1 sdf2
>[    3.036714] sd 5:0:0:0: [sdf] Attached SCSI disk
>[    3.037574]  sdc: sdc1 sdc2
>[    3.037854] sd 2:0:0:0: [sdc] Attached SCSI disk
>[    3.038190]  sdd: sdd1 sdd2
>[    3.038400] sd 3:0:0:0: [sdd] Attached SCSI disk
>[    3.038534]  sde: sde1 sde2
>[    3.038726] sd 4:0:0:0: [sde] Attached SCSI disk
>[    3.041842] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
>[    3.043208] ata8.00: ATA-8: Hitachi HDS722020ALA330, JKAOA3MA, max UDMA/133
>[    3.043209] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    3.044689] ata8.00: configured for UDMA/133
>[    3.088751] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
>[    3.088761] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
>[    3.088787] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
>[    3.090284] ata9.00: ATA-8: Hitachi HDS722020ALA330, JKAOA28A, max UDMA/133
>[    3.090285] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    3.090300] ata7.00: ATA-8: Hitachi HDS722020ALA330, JKAOA28A, max UDMA/133
>[    3.090301] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    3.091933] ata9.00: configured for UDMA/133
>[    3.091938] ata7.00: configured for UDMA/133
>[    3.092024] scsi 6:0:0:0: Direct-Access     ATA      Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
>[    3.092104] sd 6:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[    3.092127] sd 6:0:0:0: Attached scsi generic sg6 type 0
>[    3.092189] sd 6:0:0:0: [sdg] Write Protect is off
>[    3.092215] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.092217] scsi 7:0:0:0: Direct-Access     ATA      Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
>[    3.092309] sd 7:0:0:0: Attached scsi generic sg7 type 0
>[    3.092322] sd 7:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00ANSI: 5
>[    3.101093] sd 9:0:0:0: Attached scsi generic sg9 type 0
>[    3.101104] sd 9:0:0:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[    3.101163] sd 9:0:0:0: [sdj] Write Protect is off
>[    3.101190] sd 9:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.101693]  sdi: sdi1 sdi2
>[    3.101895] sd 8:0:0:0: [sdi] Attached SCSI disk
>[    3.102194]  sdh: sdh1 sdh2
>[    3.102368] sd 7:0:0:0: [sdh] Attached SCSI disk
>[    3.109435]  sdj: sdj1 sdj2
>[    3.109701] sd 9:0:0:0: [sdj] Attached SCSI disk
>[    3.666694] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.667607] tsc: Refined TSC clocksource calibration: 3213.956 MHz
>[    3.667609] Switching to clocksource tsc
>[    3.684107] usb usb4: Product: OHCI Host Controller
>[    3.689018] usb usb4: Manufacturer: Linux 3.6.10-2.fc17.x86_64 ohci_hcd
>[    3.695657] usb usb4: SerialNumber: 0000:00:12.1
>[    3.700378] hub 4-0:1.0: USB hub found
>[    3.704168] hub 4-0:1.0: 3 ports detected
>[    3.708283] ohci_hcd 0000:00:13.0: OHCI Host Controller
>[    3.713564] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
>[    3.721017] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
>[    3.781403] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.788215] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.795467] usb usb5: Product: OHCI Host Controller
>[    3.800374] usb usb5: Manufacturer: Linux 3.6.10-2.fc17.x86_64 ohci_hcd
>[    3.807012] usb usb5: SerialNumber: 0000:00:13.0
>[    3.811736] hub 5-0:1.0: USB hub found
>[    3.815518] hub 5-0:1.0: 3 ports detected
>[    3.819627] ohci_hcd 0000:00:13.1: OHCI Host Controller
>[    3.824924] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
>[    3.832363] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
>[    3.892192] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.899004] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.906255] usb usb6: Product: OHCI Host Controller
>[    3.911165] usb usb6: Manufacturer: Linux 3.6.10-2.fc17.x86_64 ohci_hcd
>[    3.917801] usb usb6: SerialNumber: 0000:00:13.1
>[    3.922532] hub 6-0:1.0: USB hub found
>[    3.926318] hub 6-0:1.0: 3 ports detected
>[    3.930440] ohci_hcd 0000:00:14.5: OHCI Host Controller
>[    3.935733] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
>[    3.943171] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
>[    4.002977] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>[    4.009783] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.017036] usb usb7: Product: OHCI Host Controller
>[    4.021946] usb usb7: Manufacturer: Linux 3.6.10-2.fc17.x86_64 ohci_hcd
>[    4.028581] usb usb7: SerialNumber: 0000:00:14.5
>[    4.033305] hub 7-0:1.0: USB hub found
>[    4.037087] hub 7-0:1.0: 2 ports detected
>[    4.041185] uhci_hcd: USB Universal Host Controller Interface driver
>[    4.047611] usbcore: registered new interface driver usbserial
>[    4.053480] usbcore: registered new interface driver usbserial_generic
>[    4.060033] USB Serial support registered for generic
>[    4.065117] usbserial: USB Serial Driver core
>[    4.069530] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    4.076717] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    4.081719] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    4.086871] mousedev: PS/2 mouse device common for all mice
>[    4.092617] rtc_cmos 00:05: RTC can wake from S4
>[    4.097380] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    4.103525] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>[    4.109958] device-mapper: uevent: version 1.0.3
>[    4.114661] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
>[    4.123172] cpuidle: using governor ladder
>[    4.127302] cpuidle: using governor menu
>[    4.131456] EFI Variables Facility v0.08 2004-May-17
>[    4.136508] usbcore: registered new interface driver usbhid
>[    4.142103] usbhid: USB HID core driver
>[    4.146008] drop_monitor: Initializing network drop monitor service
>[    4.152353] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    4.157731] TCP: cubic registered
>[    4.161082] Initializing XFRM netlink socket
>[    4.165452] NET: Registered protocol family 10
>[    4.170053] mip6: Mobile IPv6
>[    4.173054] NET: Registered protocol family 17
>[    4.177734] registered taskstats version 1
>[    4.182503]   Magic number: 1:895:96
>[    4.186192] rtc_cmos 00:05: setting system clock to 2013-02-01 22:05:22 UTC (1359756322)
>[    4.194338] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor (4 cpu cores) (version 2.20.00)
>[    4.203428] powernow-k8:    0 : pstate 0 (3200 MHz)
>[    4.208714] powernow-k8:    1 : pstate 1 (2500 MHz)
>[    4.213618] powernow-k8:    2 : pstate 2 (2100 MHz)
>[    4.218521] powernow-k8:    3 : pstate 3 (800 MHz)
>[    4.224562] Freeing unused kernel memory: 1032k freed
>[    4.229861] Write protecting the kernel read-only data: 12288k
>[    4.239795] Freeing unused kernel memory: 1864k freed
>[    4.248277] Freeing unused kernel memory: 1416k freed
>[    4.354548] dracut: dracut-018-105.git20120927.fc17
>[    4.473267] udevd[145]: starting version 182
>[    4.517404] [drm] Initialized drm 1.1.0 20060810
>[    4.532245] [drm] radeon defaulting to kernel modesetting.
>[    4.537769] [drm] radeon kernel modesetting enabled.
>[    4.538025] [drm] initializing kernel modesetting (RS780 0x1002:0x9614 0x1458:0xD000).
>[    4.538044] [drm] register mmio base: 0xFDEE0000
>[    4.538045] [drm] register mmio size: 65536
>[    4.538335] ATOM BIOS: B27722
>[    4.538355] radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
>[    4.538358] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
>[    4.538362] mtrr: type mismatch for d8000000,8000000 old: write-back new: write-combining
>[    4.538363] [drm] Detected VRAM RAM=128M, BAR=128M
>[    4.538364] [drm] RAM width 32bits DDR
>[    4.538400] [TTM] Zone  kernel: Available graphics memory: 4087992 kiB
>[    4.538401] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[    4.538401] [TTM] Initializing pool allocator
>[    4.538405] [TTM] Initializing DMA pool allocator
>[    4.538424] [drm] radeon: 128M of VRAM memory ready
>[    4.538425] [drm] radeon: 512M of GTT memory ready.
>[    4.538433] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    4.538433] [drm] Driver supports precise vblank timestamp query.
>[    4.538446] [drm] radeon: irq initialized.
>[    4.538449] [drm] GART: num cpu pages 131072, num gpu pages 131072
>[    4.539252] [drm] Loading RS780 Microcode
>[    4.546085] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
>[    4.546175] radeon 0000:01:05.0: WB enabled
>[    4.546181] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880217a7ec00
>[    4.577890] [drm] ring test on 0 succeeded in 0 usecs
>[    4.578176] [drm] ib test on ring 0 succeeded in 0 usecs
>[    4.578598] [drm] Radeon Display Connectors
>[    4.578600] [drm] Connector 0:
>[    4.578601] [drm]   VGA-1
>[    4.578605] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[    4.578606] [drm]   Encoders:
>[    4.578607] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[    4.578609] [drm] Connector 1:
>[    4.578610] [drm]   DVI-D-1
>[    4.578611] [drm]   HPD1
>[    4.578614] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[    4.578615] [drm]   Encoders:
>[    4.578616] [drm]     DFP1: INTERNAL_KLDSCP_LVTMA
>[    4.578654] [drm] radeon: power management initialized
>[    4.587213] No connectors reported connected with modes
>[    4.587215] [drm] Cannot find any crtc or sizes - going 1024x768
>[    4.589014] [drm] fb mappable at 0xD8142000
>[    4.589015] [drm] vram apper at 0xD8000000
>[    4.589015] [drm] size 3145728
>[    4.589016] [drm] fb depth is 24
>[    4.589016] [drm]    pitch is 4096
>[    4.589085] fbcon: radeondrmfb (fb0) is primary device
>[    4.789363] Console: switching to colour frame buffer device 128x48
>[    4.805131] fb0: radeondrmfb frame buffer device
>[    4.805132] drm: registered panic notifier
>[    4.805143] [drm] Initialized radeon 2.24.0 20080528 for 0000:01:05.0 on minor 0
>[    4.866552] dracut: Starting plymouth daemon
>%GCouldn't open /dev/ttyS0
>%G[    5.082662] wmi: Mapper loaded
>[    5.095292] mvsas 0000:04:00.0: mvsas: driver version 0.8.16
>[    5.101301] mvsas 0000:04:00.0: mvsas: PCI-E x8, Bandwidth Usage: 5.0 Gbps
>%G[    5.150290] md: bind<sda1>
>[    5.156824] md: bind<sdb1>
>[    5.161160] md: raid1 personality registered for level 1
>[    5.166706] bio: create slab <bio-1> at 1
>[    5.170866] md/raid1:md0: active with 2 out of 2 mirrors
>[    5.176337] created bitmap (1 pages) for device md0
>[    5.181938] md0: bitmap initialized from disk: read 1 pages, set 0 of 640 bits
>[    5.192490] md0: detected capacity change from 0 to 42948550656
>[    5.205940]  md0: unknown partition table
>[    5.268239] scsi11 : pata_atiixp
>[    5.271753] scsi12 : pata_atiixp
>[    5.275170] ata11: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
>[    5.282310] ata12: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
>[   11.272063] scsi10 : mvsas
>[   11.276106] mvsas 0000:05:00.0: mvsas: driver version 0.8.16
>[   11.282342] mvsas 0000:05:00.0: mvsas: PCI-E x8, Bandwidth Usage: 5.0 Gbps
>[   17.933268] scsi13 : mvsas
>[   18.098159] ata13.00: ATA-8: ST2000DL004 HD204UI, 1AQ10001, max UDMA/133
>[   18.108254] ata13.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>[   18.124834] ata13.00: configured for UDMA/133
>[   18.143380] scsi 13:0:0:0: Direct-Access     ATA      ST2000DL004 HD20 1AQ1 PQ: 0 ANSI: 5
>[   18.311738] ata14.00: ATA-8: ST2000DL004 HD204UI, 1AQ10001, max UDMA/133
>[   18.321979] ata14.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>[   18.338622] ata14.00: configured for UDMA/133
>[   18.357944] scsi 13:0:1:0: Direct-Access     ATA      ST2000DL004 HD20 1AQ1 PQ: 0 ANSI: 5
>[   18.526336] ata15.00: ATA-8: ST2000DL004 HD204UI, 1AQ10001, max UDMA/133
>[   18.536826] ata15.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>[   18.553746] ata15.00: configured for UDMA/133
>[   18.572597] scsi 13:0:2:0: Direct-Access     ATA      ST2000DL004 HD20 1AQ1 PQ: 0 ANSI: 5
>[   18.740870] ata16.00: ATA-8: ST2000DL004 HD204UI, 1AQ10001, max UDMA/133
>[   18.751485] ata16.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>[   18.768485] ata16.00: configured for UDMA/133
>[   18.788198] scsi 13:0:3:0: Direct-Access     ATA      ST2000DL004 HD20 1AQ1 PQ: 0 ANSI: 5
>[   18.800725] sd 13:0:0:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[   18.800846] sd 13:0:0:0: Attached scsi generic sg10 type 0
>[   18.801339] sd 13:0:1:0: Attached scsi generic sg11 type 0
>[   18.801669] sd 13:0:2:0: [sdm] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[   18.801760] sd 13:0:2:0: [sdm] Write Protect is off
>[   18.801763] sd 13:0:2:0: Attached scsi generic sg12 type 0
>[   18.801806] sd 13:0:2:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   18.801940] sd 13:0:1:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[   18.802017] sd 13:0:1:0: [sdl] Write Protect is off
>[   18.802054] sd 13:0:1:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   18.802181] sd 13:0:3:0: Attached scsi generic sg13 type 0
>[   18.803448] sd 13:0:3:0: [sdn] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[   18.803582] sd 13:0:3:0: [sdn] Write Protect is off
>[   18.803634] sd 13:0:3:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   18.810342]  sdl: sdl1 sdl2
>[   18.810886] sd 13:0:1:0: [sdl] Attached SCSI disk
>[   18.811942]  sdn: sdn1 sdn2
>[   18.812551] sd 13:0:3:0: [sdn] Attached SCSI disk
>[   18.812675]  sdm: sdm1 sdm2
>[   18.813158] sd 13:0:2:0: [sdm] Attached SCSI disk
>[   19.002688] sd 13:0:0:0: [sdk] Write Protect is off
>[   19.008650] sd 13:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   19.043756]  sdk: sdk1 sdk2
>[   19.051386] sd 13:0:0:0: [sdk] Attached SCSI disk
>[   19.265735] dracut: Scanning devices md0  for LVM volume groups 
>[   19.293455] dracut: Reading all physical volumes. This may take a while...
>[   19.316590] dracut: Found volume group "Flash" using metadata type lvm2
>[   19.371121] dracut: 2 logical volume(s) in volume group "Flash" now active
>[   19.495524] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[   19.566034] dracut: Checking ext4: /dev/mapper/Flash-Root
>[   19.576460] dracut: issuing e2fsck -a  /dev/mapper/Flash-Root
>[   19.621062] dracut: /dev/mapper/Flash-Root: clean, 106322/1303040 files, 1178000/5242880 blocks
>[   19.635524] dracut: Remounting /dev/mapper/Flash-Root with -o noatime,ro
>[   19.674914] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[   19.695784] dracut: Mounted root filesystem /dev/mapper/Flash-Root
>[   19.790208] dracut: Switching root
>[   19.859850] SELinux:  Disabled at runtime.
>[   19.900481] type=1404 audit(1359756338.244:2): selinux=0 auid=4294967295 ses=4294967295
>[   19.972408] systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
> Welcome to [0;34mFedora 17 (Beefy Miracle)[0m!  [   19.997023] systemd[1]: Set hostname to <mcp.nuclearwinter.com>.
>         Expecting device dev-ttyS0.device... [[1;32m  OK  [0m] Reached target Remote File Systems. [[1;32m  OK  [0m] Listening on Syslog Socket.          Starting Collect Read-Ahead Data...          Starting Replay Read-Ahead Data... [[1;32m  OK  [0m] Listening on Delayed Shutdown Socket. [[1;32m  OK  [0m] Listening on /dev/initctl Compatibility Named Pipe. [[1;32m  OK  [0m] Set up automount Arbitrary Executable File Formats F...utomount Point. [[1;32m  OK  [0m] Reached target Encrypted Volumes. [[1;32m  OK  [0m] Listening on Device-mapper event daemon FIFOs.          Expecting device dev-mapper-Flash\x2dSwap.device... [[1;32m  OK  [0m] Listening on udev Kernel Socket. [[1;32m  OK  [0m] Listening on udev Control Socket.          Expecting device dev-mapper-Raid\x2dBackups.device... [[1;32m  OK  [0m] Listening on Journal Socket. [[1;32m  OK  [0m] Reached target Syslog.          Mounting RPC Pipe File System...          Mounting RPC Pipe File System...          Starting Configure read-only root support...          Mounting Media Directory[   20.239979] RPC: Registered named UNIX socket transport module.
>... [   20.251209] RPC: Registered udp transport module.
>[   20.259971] RPC: Registered tcp transport module.
>[   20.268650] RPC: Registered tcp NFSv4.1 backchannel transport module.
>         Starting Software RAID Monitor Takeover... [   20.290872] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>         Starting Journal Service... [[1;32m  OK  [0m] Started Journal Service.          Mounting[   20.317645] systemd-journald[516]: Fixed max_use=399.2M max_size=49.9M min_size=64.0K keep_free=199.6M
> POSIX Message Queue File System... [   20.318179] systemd-journald[516]: Vacuuming...
>         Mounting Huge Pages File System...          Mounting Debug File System...          Starting udev Kernel Device Manager...          Starting udev Coldplug all Devices... [   20.393107] udevd[527]: starting version 182
>[[1;32m  OK  [0m] Started Collect Read-Ahead Data. [[1;32m  OK  [0m] Started Replay Read-Ahead Data. [[1;32m  OK  [0m] Started udev Kernel Device Manager. [[1;32m  OK  [0m] Mounted RPC Pipe File System. [[1;32m  OK  [0m] Mounted RPC Pipe File System. [[1;32m  OK  [0m] Started Configure read-only root support. [[1;32m  OK  [0m] Mounted Media Directory. [[1;32m  OK  [0m] Started Software RAID Monitor Takeover. [[1;32m  OK  [0m] Mounted POSIX Message Queue File System. [[1;32m  OK  [0m] Mounted Huge Pages File System. [[1;32m  OK  [0m] Mounted Debug File System.          Starting Load legacy module configuration...          Starting Load Kernel Modules...          Starting Apply Kernel Variables... [   20.486048] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   20.498840] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>         Starting Remount Root a[   20.505567] r8169 0000:08:00.0: eth0: RTL8168c/8111c at 0xffffc900115ee000, 00:24:1d:7e:5c:1c, XID 1c4000c0 IRQ 49
>nd Kernel File S[   20.505569] r8169 0000:08:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
>ystems...          Starting Setup Virtual Console... [   20.550325] MCE: In-kernel MCE decoding enabled.
>[[1;32m  OK  [[   20.553538] EXT4-fs (dm-1): re-mounted. Opts: (null)
>0m] Started udev Coldplug all De[   20.562586] microcode: CPU0: patch_level=0x010000c6
>vices. [   20.563754] EDAC MC: Ver: 3.0.0
>[   20.575054] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1[   20.577706] AMD64 EDAC driver v3.4.0
>[   20.577710] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   20.593654] md: bind<sdf2>
> (20120711/utaddress-251)
>[   20.608229] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
>[[1;32m  OK  [[   20.615102] EDAC amd64: DRAM ECC disabled.
>0m] Started Load[   20.615106] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>[   20.615106]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>[   20.615106]  (Note that use of the override may cause unknown side effects.)
> legacy module configuration. [   20.615331] microcode: CPU0: new patch_level=0x010000db
>[   20.620556] microcode: CPU1: patch_level=0x010000c6
>[   20.633017] md: bind<sdf1>
>[   20.648362] microcode: CPU1: new patch_level=0x010000db
>[   20.648917] microcode: CPU2: patch_level=0x010000c6
>[   20.649278] microcode: CPU2: new patch_level=0x010000db
>[   20.649284] microcode: CPU3: patch_level=0x010000c6
>[   20.649351] sp5100_tco: mmio address 0xfec000f0 already in use
>[   20.655539] microcode: CPU3: new patch_level=0x010000db
>[   20.660626] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   20.670558] md: bind<sdj1>
>[   20.701855] kvm: disabled by bios
>[   20.701885] md: bind<sdk1>
>[   20.708360] md: bind<sdk2>
>[   20.713299] md: bind<sdj2>
>[   20.717592] md: bind<sdi2>
>[   20.723830] md: bind<sdm2>
>[   20.727949] md: bind<sde1>
>[   20.732354] md: bind<sde2>
>[   20.742063] md: bind<sdm1>
>[   20.753064] md: bind<sdn1>
>[   20.762073] md: bind<sdi1>
>[[1;32m  OK  [0m] Started Load Kernel Modules. [[1;32m  OK  [0m] Started A[   20.770831] md: bind<sdl1>
>pply Kernel Variables. [   20.775662] md: bind<sdc2>
>[   20.779731] md: bind<sdd2>
>[   20.784472] md: bind<sdc1>
>[[1;32m  OK  [0m] Started Remo[   20.794385] md: bind<sdn2>
>unt Root and Ker[   20.799283] md: bind<sdg1>
>nel File Systems. [[1;32m  OK  [[   20.805459] md: bind<sdl2>
>0m] Started Setup Virtual Console. [[1;32m  OK  [0m] Reached[   20.814728] md: bind<sdd1>
> target Local File Systems (Pre).          Starting Load Random Seed...          Mounting Configuration File System... [   20.835060] md: bind<sdg2>
>         Starting udev Wait for Complete Device Initialization... [   20.852241] md: bind<sdh1>
>[[1;32m  OK  [0m] Mounted Configuration File System. [[1;32m  OK  [0m] Started Load Random Seed. [[1;32m  OK  [0m] Found device /dev/ttyS0. [   20.871382] async_tx: api initialized (async)
>[   20.879331] xor: automatically using best checksumming function:
>[   20.897507]    generic_sse:  3168.000 MB/sec
>[   20.922463] raid6: sse2x1    4125 MB/s
>[   20.943410] raid6: sse2x2    6636 MB/s
>[   20.964379] raid6: sse2x4    7781 MB/s
>[   20.968761] raid6: using algorithm sse2x4 (7781 MB/s)
>[   20.974444] raid6: using intx1 recovery algorithm
>[   20.984795] md: raid6 personality registered for level 6
>[   20.990759] md: raid5 personality registered for level 5
>[   20.996698] md: raid4 personality registered for level 4
>[   21.002817] md/raid:md1: device sdh1 operational as raid disk 6
>[   21.009364] md/raid:md1: device sdd1 operational as raid disk 11
>[   21.015965] md/raid:md1: device sdg1 operational as raid disk 8
>[   21.022450] md/raid:md1: device sdc1 operational as raid disk 5
>[   21.028931] md/raid:md1: device sdl1 operational as raid disk 2
>[   21.035407] md/raid:md1: device sdi1 operational as raid disk 7
>[   21.041885] md/raid:md1: device sdn1 operational as raid disk 1
>[   21.048370] md/raid:md1: device sdm1 operational as raid disk 4
>[   21.054846] md/raid:md1: device sde1 operational as raid disk 10
>[   21.061413] md/raid:md1: device sdk1 operational as raid disk 3
>[   21.067891] md/raid:md1: device sdj1 operational as raid disk 0
>[   21.074371] md/raid:md1: device sdf1 operational as raid disk 9
>[   21.083514] md/raid:md1: allocated 12786kB
>[   21.090010] md/raid:md1: raid level 6 active with 12 out of 12 devices, algorithm 2
>[   21.100436] created bitmap (8 pages) for device md1
>[   21.108379] md1: bitmap initialized from disk: read 1 pages, set 0 of 14905 bits
>[[1;32m  OK  [0m] Found device /dev/mapper/Flash-Swap.          Activating swap /dev/mapper/Flash-Swap... [   21.194466] Adding 2097148k swap on /dev/mapper/Flash-Swap.  Priority:0 extents:1 across:2097148k 
>[[1;32m  OK  [0m] Activated swap /dev/mapper/Flash-Swap. [[1;32m  OK  [0m] Reached target Swap. [   21.510814] md1: detected capacity change from 0 to 10002036162560
>[   21.522450]  md1: unknown partition table
>[   21.531830] md: bind<sdh2>
>[   21.546657] md/raid:md2: device sdh2 operational as raid disk 9
>[   21.555595] md/raid:md2: device sdg2 operational as raid disk 5
>[   21.564415] md/raid:md2: device sdl2 operational as raid disk 4
>[   21.573177] md/raid:md2: device sdn2 operational as raid disk 2
>[   21.581900] md/raid:md2: device sdd2 operational as raid disk 3
>[   21.590596] md/raid:md2: device sdc2 operational as raid disk 6
>[   21.599234] md/raid:md2: device sde2 operational as raid disk 0
>[   21.607824] md/raid:md2: device sdm2 operational as raid disk 11
>[   21.616417] md/raid:md2: device sdi2 operational as raid disk 10
>[   21.624908] md/raid:md2: device sdj2 operational as raid disk 8
>[   21.633290] md/raid:md2: device sdk2 operational as raid disk 7
>[   21.641600] md/raid:md2: device sdf2 operational as raid disk 1
>[   21.652407] md/raid:md2: allocated 12786kB
>[   21.658973] md/raid:md2: raid level 6 active with 12 out of 12 devices, algorithm 2
>[   21.667432] created bitmap (8 pages) for device md2
>[   21.675352] md2: bitmap initialized from disk: read 1 pages, set 0 of 14905 bits
>[   21.705264] md2: detected capacity change from 0 to 10001929994240
>[   21.716713]  md2: unknown partition table
>[[1;32m  OK  [0m] Started udev Wait for Complete Device Initialization.          Starting Wait for storage scan... [[1;32m  OK  [0m] Started Wait for storage scan.          Starting Initialize storage subsystems (RAID, LVM, etc.)... [   23.206300] device-mapper: table: 253:2: adding target device (start sect 19535224832 len 19535011840) caused an alignment inconsistency
>[[1;32m  OK  [0m] Found device /dev/mapper/Raid-Backups.          Mounting /backups... [[1;32m  OK  [0m] Started Initialize storage subsystems (RAID, LVM, etc.).          Starting Initialize storage subsystems (RAID, LVM, etc.)... [[1;32m  OK  [0m] Started Initialize storage subsystems (RAID, LVM, etc.).          Starting Monitoring of LVM2 mirrors, snapshots etc. ...ress polling... [[1;32m  OK  [0m] Started Monitoring of LVM2 mirrors, snapshots etc. u...ogress polling. [   23.691570] EXT4-fs (dm-2): warning: maximal mount count reached, running e2fsck is recommended
>[   23.801605] EXT4-fs (dm-2): recovery complete
>[   23.806919] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
>[[1;32m  OK  [0m] Mounted /backups. [[1;32m  OK  [0m] Reached target Local File Systems.          Starting Recreate Volatile Files and Directories...          Starting Tell Plymouth To Write Out Runtime Data... [[1;32m  OK  [0m] Started Recreate Volatile Files and Directories. [[1;32m  OK  [0m] Started Tell Plymouth To Write Out Runtime Data. [[1;32m  OK  [0m] Reached target System Initialization.          Starting Console System Startup Logging... [[1;32m  OK  [0m] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [[1;32m  OK  [0m] Listening on RPCbind Server Activation Socket. [[1;32m  OK  [0m] Listening on PC/SC Smart Card Daemon Activation Socket. [[1;32m  OK  [0m] Listening on D-Bus System Message Bus Socket. [[1;32m  OK  [0m] Reached target Sockets. [[1;32m  OK  [0m] Reached target Basic System.          Starting LSB: Init script for TCSD...          Starting IPv4 firewall with iptables...          Starting IPv6 firewall with ip6tables...          Starting Permit User Sessions...          Starting Initialize hardware monitoring sensors...          Starting Self Monitoring and Reporting Technology (SMAR[   23.977061] it87: Found IT8718F chip at 0x228, revision 5
>T) Daemon... [   23.985123] it87: Beeping is supported
>[   23.990199] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>tcsd[808]: Starting tcsd: [FAILED] [   23.998240] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[[1;32m  OK  [0m] Started Self Monitoring and Reporting Technology (SMART) Daemon.          Starting ABRT Automated Bug Reporting Tool... [[1;32m  OK  [0m] Started ABRT Automated Bug Reporting Tool.          Starting ABRT kernel log watcher... [[1;32m  OK  [0m] Started ABRT kernel log watcher.          Starting Machine Check Exception Logging Daemon...          Starting Security Auditing Service...          Starting Network Manager...          Starting Install ABRT coredump hook...          Starting Harvest vmcores for ABRT...          Starting NTP client/server...          Starting Hard drive temperature monitor daemon... [[1;32m  OK  [0m] Started Hard drive temperature monitor daemon.          Starting ABRT Xorg log watcher... [[1;32m  OK  [0m] Started ABRT Xorg log watcher.          Starting Software RAID monitoring and management...          Starting irqbalance daemon...          Starting ACPI Event Daemon...          Starting Login Service...          Starting Avahi mDNS/DNS-SD Stack...          Starting System Logging Service... [[1;32m  OK  [0m] Started System Logging Service.          Starting D-Bus System Message Bus... [   24.282667] systemd[1]: tcsd.service: control process exited, code=exited status=137
>[[1;32m  OK  [0m] Started Console System Startup Logging. [   24.300159] systemd[1]: Unit tcsd.service entered failed state.
>[[1;31mFAILED[0m] Failed to start LSB: Init script for TCSD.          See 'systemctl status tcsd.service' for details. [[1;32m  OK  [0m] Started IPv4 firewall with iptables. [[1;32m  OK  [0m] Started IPv6 firewall with ip6tables. [[1;32m  OK  [0m] Started Permit User Sessions. [[1;32m  OK  [0m] Started Machine Check Exception Logging Daemon. [[1;32m  OK  [0m] Started Security Auditing Service. [[1;32m  OK  [0m] Started Install ABRT coredump hook. [[1;32m  OK  [0m] Started Harvest vmcores for ABRT. [[1;32m  OK  [0m] Started Software RAID monitoring and management. [[1;32m  OK  [0m] Started irqbalance daemon. [[1;32m  OK  [0m] Started ACPI Event Daemon. [[1;32m  OK  [0m] Started Initialize hardware monitoring sensors. [[1;32m  OK  [0m] Started D-Bus System Message Bus. [[1;32m  OK  [0m] Started NTP client/server. [[1;32m  OK  [0m] Reached target Network Time Protocol.          Starting Job spooling tools... [[1;32m  OK  [0m] Started Job spooling tools.          Starting Command Scheduler... [[1;32m  OK  [0m] Started Command Scheduler. [[1;32m  OK  [0m] Started Login Service. [[1;32m  OK  [0m] Started Avahi mDNS/DNS-SD Stack. [[1;32m  OK  [0m] Started Network Manager. [[1;32m  OK  [0m] Reached target Network.          Starting /etc/rc.d/rc.local Compatibility[   24.658663] r8169 0000:08:00.0: p10p1: link down
>... [   24.667334] r8169 0000:08:00.0: p10p1: link down
>[   24.674973] IPv6: ADDRCONF(NETDEV_UP): p10p1: link is not ready
>         Starting Simple Network Management Protocol (SNMP) Daemon....          Starting NFS Server...          Starting Sendmail Mail Transport Agent...          Starting OpenSSH server daemon...          Starting APC UPS Power Control Daemon for Linux...          Starting RPC bind service... [   24.768020] netlink: 12 bytes leftover after parsing attributes.
>[[1;32m  OK  [0m] Started OpenSSH server daemon. [[1;32m  OK  [0m] Started APC UPS Power Control Daemon for Linux. [[1;32m  OK  [0m] Started RPC bind service.          Starting NFS file locking service.... [   24.891924] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>[   24.903386] NFSD: starting 90-second grace period
>[[1;32m  OK  [0m] Started Sendmail Mail Transport Agent. [[1;32m  OK  [0m] Started NFS Server.          Starting NFS Mount Daemon...          Starting NFS Remote Quota Server...          Starting NFSv4 ID-name mapping daemon...          Starting Sendmail Mail Transport Client... [[1;32m  OK  [0m] Started NFS Remote Quota Server. [[1;32m  OK  [0m] Started Simple Network Management Protocol (SNMP) Daemon.. [[1;32m  OK  [0m] Started NFS Mount Daemon. [[1;32m  OK  [0m] Started NFSv4 ID-name mapping daemon. [[1;32m  OK  [0m] Started NFS file locking service.. [[1;32m  OK  [0m] Started Sendmail Mail Transport Client. [[1;32m  OK  [0m] Started /etc/rc.d/rc.local Compatibility.          Starting Wait for Plymouth Boot Screen to Quit...          Starting Terminate Plymouth Boot Screen...  Fedora release 17 (Beefy Miracle)
>Kernel 3.6.10-2.fc17.x86_64 on an x86_64 (ttyS0)
>
>mcp login: [   27.265597] r8169 0000:08:00.0: p10p1: link up
>[   27.270069] IPv6: ADDRCONF(NETDEV_CHANGE): p10p1: link becomes ready
>root Password: 
>Last login: Fri Feb  1 15:58:39 on ttyS0
>[root@mcp ~]# cat /proc/mdstat
>Personalities : [raid1] [raid6] [raid5] [raid4] 
>md1 : active raid6 sdh1[6] sdd1[11] sdg1[8] sdc1[5] sdl1[2] sdi1[7] sdn1[1] sdm1[4] sde1[10] sdk1[3] sdj1[0] sdf1[9]
>      9767613440 blocks level 6, 128k chunk, algorithm 2 [12/12] [UUUUUUUUUUUU]
>      bitmap: 0/8 pages [0KB], 65536KB chunk
>
>md2 : active raid6 sdh2[10] sdg2[16] sdl2[13] sdn2[12] sdd2[4] sdc2[17] sde2[5] sdm2[14] sdi2[15] sdj2[8] sdk2[9] sdf2[6]
>      9767509760 blocks super 1.2 level 6, 128k chunk, algorithm 2 [12/12] [UUUUUUUUUUUU]
>      bitmap: 0/8 pages [0KB], 65536KB chunk
>
>md0 : active raid1 sdb1[3] sda1[2]
>      41941944 blocks super 1.2 [2/2] [UU]
>      bitmap: 1/1 pages [4KB], 65536KB chunk
>
>unused devices: <none>
>[root@mcp ~]#

Actions: View

Attachments on bug 906952: 691809 | 691810 | 691811 | 691812