Attachment 694516 Details for Bug 908783 – File: dmesg

File: dmesg

dmesg (text/plain), 49.06 KB, created by ramzi on 2013-02-07 14:14:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: ramzi

Created: 2013-02-07 14:14:19 UTC

Size: 49.06 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 3.7.3-101.fc17.i686 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #1 SMP Fri Jan 18 17:52:48 UTC 2013
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e7000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003dfbffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000003dfc0000-0x000000003dfcdfff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000003dfce000-0x000000003dfeffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000003dff0000-0x000000003dffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
>[    0.000000] DMI 2.3 present.
>[    0.000000] DMI: ECS P4M800-M7/P4M800-M7, BIOS 080012  03/08/2006
>[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x3dfc0 max_arch_pfn = 0x100000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-DFFFF uncachable
>[    0.000000]   E0000-EFFFF write-through
>[    0.000000]   F0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask FE0000000 write-back
>[    0.000000]   1 base 020000000 mask FF0000000 write-back
>[    0.000000]   2 base 030000000 mask FF8000000 write-back
>[    0.000000]   3 base 038000000 mask FFC000000 write-back
>[    0.000000]   4 base 03C000000 mask FFE000000 write-back
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
>[    0.000000] initial memory mapped: [mem 0x00000000-0x00ffffff]
>[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x373fdfff]
>[    0.000000]  [mem 0x00000000-0x003fffff] page 4k
>[    0.000000]  [mem 0x00400000-0x36ffffff] page 2M
>[    0.000000]  [mem 0x37000000-0x373fdfff] page 4k
>[    0.000000] kernel direct mapping tables up to 0x373fdfff @ [mem 0x00ff9000-0x00ffffff]
>[    0.000000] RAMDISK: [mem 0x35e32000-0x36f10fff]
>[    0.000000] ACPI: RSDP 000f82f0 00014 (v00 ACPIAM)
>[    0.000000] ACPI: RSDT 3dfc0000 00030 (v01 A M I  OEMRSDT  03000608 MSFT 00000097)
>[    0.000000] ACPI: FACP 3dfc0200 00084 (v02 A M I  OEMFACP  03000608 MSFT 00000097)
>[    0.000000] ACPI: DSDT 3dfc0400 03D87 (v01  12345 12345123 00000123 INTL 02002026)
>[    0.000000] ACPI: FACS 3dfce000 00040
>[    0.000000] ACPI: APIC 3dfc0390 0006C (v01 A M I  OEMAPIC  03000608 MSFT 00000097)
>[    0.000000] ACPI: OEMB 3dfce040 00046 (v01 A M I  AMI_OEM  03000608 MSFT 00000097)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 107MB HIGHMEM available.
>[    0.000000] 883MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 373fe000
>[    0.000000]   low ram: 0 - 373fe000
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
>[    0.000000]   Normal   [mem 0x01000000-0x373fdfff]
>[    0.000000]   HighMem  [mem 0x373fe000-0x3dfbffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0x3dfbffff]
>[    0.000000] On node 0 totalpages: 253775
>[    0.000000] free_area_init_node: node 0, pgdat c0bf7fc0, node_mem_map f5672200
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1736 pages used for memmap
>[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 216 pages used for memmap
>[    0.000000]   HighMem zone: 27370 pages, LIFO batch:7
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
>[    0.000000] PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
>[    0.000000] e820: [mem 0x3e000000-0xfebfffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 13 pages/cpu @f73c3000 s32384 r0 d20864 u53248
>[    0.000000] pcpu-alloc: s32384 r0 d20864 u53248 alloc=13*4096
>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 251791
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.7.3-101.fc17.i686 root=/dev/mapper/VolGroup-lv_root ro rd.md=0 rd.dm=0 SYSFONT=True rd.lvm.lv=VolGroup/lv_swap rd.lvm.lv=VolGroup/lv_root rd.luks=0 KEYTABLE=fr-latin9 LANG=en_US.UTF-8 rhgb quiet
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] __ex_table already sorted, skipping sort
>[    0.000000] Initializing CPU#0
>[    0.000000] allocated 2030976 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] Initializing HighMem for node 0 (000373fe:0003dfc0)
>[    0.000000] Memory: 976948k/1015552k available (5550k kernel code, 38152k reserved, 2693k data, 636k init, 110344k highmem)
>[    0.000000] virtual kernel memory layout:
>[    0.000000]     fixmap  : 0xffa96000 - 0xfffff000   (5540 kB)
>[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>[    0.000000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>[    0.000000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>[    0.000000]       .init : 0xc0c0e000 - 0xc0cad000   ( 636 kB)
>[    0.000000]       .data : 0xc096ba27 - 0xc0c0d040   (2693 kB)
>[    0.000000]       .text : 0xc0400000 - 0xc096ba27   (5550 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
>[    0.000000] NR_IRQS:2304 nr_irqs:712 16
>[    0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2992.500 MHz processor
>[    0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.00 BogoMIPS (lpj=2992500)
>[    0.001008] pid_max: default: 32768 minimum: 301
>[    0.001065] Security Framework initialized
>[    0.001076] SELinux:  Initializing.
>[    0.001090] SELinux:  Starting in permissive mode
>[    0.001163] Mount-cache hash table entries: 512
>[    0.002047] Initializing cgroup subsys cpuacct
>[    0.002051] Initializing cgroup subsys memory
>[    0.002063] Initializing cgroup subsys devices
>[    0.002066] Initializing cgroup subsys freezer
>[    0.002069] Initializing cgroup subsys net_cls
>[    0.002071] Initializing cgroup subsys blkio
>[    0.002074] Initializing cgroup subsys perf_event
>[    0.002127] CPU: Physical Processor ID: 0
>[    0.002130] CPU: Processor Core ID: 0
>[    0.002134] mce: CPU supports 4 MCE banks
>[    0.002148] CPU0: Thermal monitoring enabled (TM1)
>[    0.002154] process: using mwait in idle threads
>[    0.002172] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
>[    0.002172] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
>[    0.002172] tlb_flushall_shift: 6
>[    0.002308] Freeing SMP alternatives: 24k freed
>[    0.003817] ACPI: Core revision 20120913
>[    0.007020] ftrace: allocating 22932 entries in 45 pages
>[    0.026137] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.027500] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.037524] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (fam: 0f, model: 04, stepping: 09)
>[    0.038000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
>[    0.038000] ... version:                0
>[    0.038000] ... bit width:              40
>[    0.038000] ... generic registers:      18
>[    0.038000] ... value mask:             000000ffffffffff
>[    0.038000] ... max period:             0000007fffffffff
>[    0.038000] ... fixed-purpose events:   0
>[    0.038000] ... event mask:             000000000003ffff
>[    0.039682] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.039843] CPU 1 irqstacks, hard=f50cc000 soft=f50ce000
>[    0.002000] Initializing CPU#1
>[    0.039847] smpboot: Booting Node   0, Processors  #1
>[    0.051000] TSC synchronization [CPU#0 -> CPU#1]:
>[    0.051000] Measured 4198321147 cycles TSC warp between CPUs, turning off TSC clock.
>[    0.051000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
>[    0.051033] Brought up 2 CPUs
>[    0.051039] smpboot: Total of 2 processors activated (11970.00 BogoMIPS)
>[    0.052144] devtmpfs: initialized
>[    0.053184] PM: Registering ACPI NVS region [mem 0x3dfce000-0x3dfeffff] (139264 bytes)
>[    0.054460] atomic64 test passed for i586+ platform with CX8 and with SSE
>[    0.054510] RTC time: 20:29:45, date: 02/04/13
>[    0.054589] NET: Registered protocol family 16
>[    0.055120] ACPI: bus type pci registered
>[    0.055325] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
>[    0.055328] PCI: Using configuration type 1 for base access
>[    0.057225] bio: create slab <bio-0> at 0
>[    0.057225] ACPI: Added _OSI(Module Device)
>[    0.057225] ACPI: Added _OSI(Processor Device)
>[    0.057225] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.057225] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.058570] ACPI: EC: Look up EC in DSDT
>[    0.060608] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.062879] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PDC] (Node f5022150), AE_INVALID_TABLE_LENGTH (20120913/psparse-536)
>[    0.062980] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PDC] (Node f50221e0), AE_INVALID_TABLE_LENGTH (20120913/psparse-536)
>[    0.063947] ACPI: Interpreter enabled
>[    0.063957] ACPI: (supports S0 S1 S4 S5)
>[    0.063986] ACPI: Using IOAPIC for interrupt routing
>[    0.075335] ACPI: No dock devices found.
>[    0.075344] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>[    0.075460] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.075639] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>[    0.075644] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>[    0.075648] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>[    0.075652] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>[    0.075655] pci_root PNP0A03:00: host bridge window [mem 0x3e000000-0xfff7ffff] (ignored)
>[    0.075659] PCI: root bus 00: using default resources
>[    0.075665] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
>[    0.075713] PCI host bridge to bus 0000:00
>[    0.075719] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.075723] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>[    0.075727] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
>[    0.075754] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000
>[    0.075769] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
>[    0.075861] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000
>[    0.075918] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000
>[    0.075974] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000
>[    0.076039] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000
>[    0.076098] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000
>[    0.076158] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
>[    0.076221] pci 0000:00:01.0: supports D1
>[    0.076261] pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f
>[    0.076283] pci 0000:00:0f.0: reg 10: [io  0xec00-0xec07]
>[    0.076296] pci 0000:00:0f.0: reg 14: [io  0xe880-0xe883]
>[    0.076309] pci 0000:00:0f.0: reg 18: [io  0xe800-0xe807]
>[    0.076322] pci 0000:00:0f.0: reg 1c: [io  0xe480-0xe483]
>[    0.076335] pci 0000:00:0f.0: reg 20: [io  0xe400-0xe40f]
>[    0.076348] pci 0000:00:0f.0: reg 24: [io  0xe000-0xe0ff]
>[    0.076412] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
>[    0.076470] pci 0000:00:0f.1: reg 20: [io  0xfc00-0xfc0f]
>[    0.076552] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
>[    0.076608] pci 0000:00:10.0: reg 20: [io  0xdc00-0xdc1f]
>[    0.076660] pci 0000:00:10.0: supports D1 D2
>[    0.076663] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.076689] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
>[    0.076745] pci 0000:00:10.1: reg 20: [io  0xd880-0xd89f]
>[    0.076796] pci 0000:00:10.1: supports D1 D2
>[    0.076800] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.076824] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
>[    0.076880] pci 0000:00:10.2: reg 20: [io  0xd800-0xd81f]
>[    0.076931] pci 0000:00:10.2: supports D1 D2
>[    0.076934] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.076958] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
>[    0.077020] pci 0000:00:10.3: reg 20: [io  0xd480-0xd49f]
>[    0.077071] pci 0000:00:10.3: supports D1 D2
>[    0.077075] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.077100] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
>[    0.077122] pci 0000:00:10.4: reg 10: [mem 0xfebffc00-0xfebffcff]
>[    0.077208] pci 0000:00:10.4: supports D1 D2
>[    0.077212] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.077241] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
>[    0.077318] HPET not enabled in BIOS. You might try hpet=force boot option
>[    0.077377] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
>[    0.077399] pci 0000:00:11.5: reg 10: [io  0xd000-0xd0ff]
>[    0.077489] pci 0000:00:11.5: supports D1 D2
>[    0.077520] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
>[    0.077542] pci 0000:00:12.0: reg 10: [io  0xee00-0xeeff]
>[    0.077555] pci 0000:00:12.0: reg 14: [mem 0xfebff800-0xfebff8ff]
>[    0.077634] pci 0000:00:12.0: supports D1 D2
>[    0.077637] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.077709] pci 0000:01:00.0: [1106:3344] type 00 class 0x030000
>[    0.077730] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf3ffffff pref]
>[    0.077740] pci 0000:01:00.0: reg 14: [mem 0xfd000000-0xfdffffff]
>[    0.077779] pci 0000:01:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
>[    0.077814] pci 0000:01:00.0: supports D1 D2
>[    0.077861] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.077869] pci 0000:00:01.0:   bridge window [mem 0xfca00000-0xfeafffff]
>[    0.077875] pci 0000:00:01.0:   bridge window [mem 0xeff00000-0xf7efffff pref]
>[    0.077885] pci_bus 0000:00: on NUMA node 0
>[    0.077891] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.078113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>[    0.078211]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
>[    0.078216]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
>[    0.086783] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>[    0.086864] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>[    0.086941] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>[    0.087029] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.087108] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.087186] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.087264] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.087346] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>[    0.087432] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.087432] vgaarb: loaded
>[    0.087432] vgaarb: bridge control possible 0000:01:00.0
>[    0.087432] SCSI subsystem initialized
>[    0.087432] ACPI: bus type scsi registered
>[    0.087432] libata version 3.00 loaded.
>[    0.087432] ACPI: bus type usb registered
>[    0.087432] usbcore: registered new interface driver usbfs
>[    0.087432] usbcore: registered new interface driver hub
>[    0.087432] usbcore: registered new device driver usb
>[    0.088016] PCI: Using ACPI for IRQ routing
>[    0.088023] PCI: pci_cache_line_size set to 64 bytes
>[    0.088103] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>[    0.088107] e820: reserve RAM buffer [mem 0x3dfc0000-0x3fffffff]
>[    0.088268] NetLabel: Initializing
>[    0.088272] NetLabel:  domain hash size = 128
>[    0.088274] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.088290] NetLabel:  unlabeled traffic allowed by default
>[    0.088485] Switching to clocksource refined-jiffies
>[    0.100659] pnp: PnP ACPI init
>[    0.100694] ACPI: bus type pnp registered
>[    0.100881] pnp 00:00: [bus 00-ff]
>[    0.100886] pnp 00:00: [io  0x0cf8-0x0cff]
>[    0.100891] pnp 00:00: [io  0x0000-0x0cf7 window]
>[    0.100894] pnp 00:00: [io  0x0d00-0xffff window]
>[    0.100899] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>[    0.100902] pnp 00:00: [mem 0x000d0000-0x000dffff window]
>[    0.100906] pnp 00:00: [mem 0x3e000000-0xfff7ffff window]
>[    0.100974] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>[    0.101028] pnp 00:01: [dma 4]
>[    0.101033] pnp 00:01: [io  0x0000-0x000f]
>[    0.101036] pnp 00:01: [io  0x0081-0x0083]
>[    0.101039] pnp 00:01: [io  0x0087]
>[    0.101042] pnp 00:01: [io  0x0089-0x008b]
>[    0.101045] pnp 00:01: [io  0x008f]
>[    0.101048] pnp 00:01: [io  0x00c0-0x00df]
>[    0.101089] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.101109] pnp 00:02: [io  0x0070-0x0071]
>[    0.101131] pnp 00:02: [irq 8]
>[    0.101163] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.101211] pnp 00:03: [io  0x0060]
>[    0.101215] pnp 00:03: [io  0x0064]
>[    0.101224] pnp 00:03: [irq 1]
>[    0.101259] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>[    0.101305] pnp 00:04: [io  0x0061]
>[    0.101345] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.101362] pnp 00:05: [io  0x00f0-0x00ff]
>[    0.101371] pnp 00:05: [irq 13]
>[    0.101404] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.103046] pnp 00:06: [io  0x03f0-0x03f5]
>[    0.103050] pnp 00:06: [io  0x03f7]
>[    0.103058] pnp 00:06: [irq 6]
>[    0.103062] pnp 00:06: [dma 2]
>[    0.103135] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
>[    0.104346] pnp 00:07: [io  0x0378-0x037f]
>[    0.104351] pnp 00:07: [io  0x0778-0x077f]
>[    0.104363] pnp 00:07: [irq 7]
>[    0.104367] pnp 00:07: [dma 3]
>[    0.104795] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
>[    0.105813] pnp 00:08: [io  0x0000-0xffffffff disabled]
>[    0.105818] pnp 00:08: [io  0x0a00-0x0a0f]
>[    0.105821] pnp 00:08: [io  0x0290-0x029f]
>[    0.105824] pnp 00:08: [io  0x0a20-0x0a2f]
>[    0.105827] pnp 00:08: [io  0x0a30-0x0a3f]
>[    0.105831] pnp 00:08: [io  0x0a40-0x0a4f]
>[    0.105905] system 00:08: [io  0x0a00-0x0a0f] has been reserved
>[    0.105909] system 00:08: [io  0x0290-0x029f] has been reserved
>[    0.105913] system 00:08: [io  0x0a20-0x0a2f] has been reserved
>[    0.105917] system 00:08: [io  0x0a30-0x0a3f] has been reserved
>[    0.105921] system 00:08: [io  0x0a40-0x0a4f] has been reserved
>[    0.105927] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.106060] pnp 00:09: [io  0x0010-0x001f]
>[    0.106064] pnp 00:09: [io  0x0022-0x003f]
>[    0.106067] pnp 00:09: [io  0x0044-0x005f]
>[    0.106071] pnp 00:09: [io  0x0062-0x0063]
>[    0.106074] pnp 00:09: [io  0x0065-0x006f]
>[    0.106077] pnp 00:09: [io  0x0072-0x007f]
>[    0.106080] pnp 00:09: [io  0x0080]
>[    0.106083] pnp 00:09: [io  0x0084-0x0086]
>[    0.106086] pnp 00:09: [io  0x0088]
>[    0.106089] pnp 00:09: [io  0x008c-0x008e]
>[    0.106092] pnp 00:09: [io  0x0090-0x009f]
>[    0.106096] pnp 00:09: [io  0x00a2-0x00bf]
>[    0.106099] pnp 00:09: [io  0x00e0-0x00ef]
>[    0.106102] pnp 00:09: [io  0x0290-0x0297]
>[    0.106105] pnp 00:09: [io  0x0c00-0x0c05]
>[    0.106108] pnp 00:09: [io  0x03e0-0x03e7]
>[    0.106111] pnp 00:09: [io  0x04d0-0x04d1]
>[    0.106115] pnp 00:09: [io  0x0800-0x087f]
>[    0.106118] pnp 00:09: [io  0x0400-0x041f]
>[    0.106121] pnp 00:09: [io  0x0000-0xffffffff disabled]
>[    0.106185] system 00:09: [io  0x0290-0x0297] has been reserved
>[    0.106190] system 00:09: [io  0x0c00-0x0c05] has been reserved
>[    0.106194] system 00:09: [io  0x03e0-0x03e7] has been reserved
>[    0.106197] system 00:09: [io  0x04d0-0x04d1] has been reserved
>[    0.106201] system 00:09: [io  0x0800-0x087f] has been reserved
>[    0.106205] system 00:09: [io  0x0400-0x041f] has been reserved
>[    0.106210] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.106281] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
>[    0.106286] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
>[    0.106333] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.106337] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.106342] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.107170] pnp 00:0b: [io  0x03f8-0x03ff]
>[    0.107180] pnp 00:0b: [irq 4]
>[    0.107184] pnp 00:0b: [dma 0 disabled]
>[    0.107282] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.107547] pnp 00:0c: [mem 0x00000000-0x0009ffff]
>[    0.107552] pnp 00:0c: [mem 0x000c0000-0x000cffff]
>[    0.107555] pnp 00:0c: [mem 0x000e0000-0x000fffff]
>[    0.107558] pnp 00:0c: [mem 0x00100000-0x3dffffff]
>[    0.107561] pnp 00:0c: [mem 0xfff80000-0xffffffff]
>[    0.107620] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.107625] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
>[    0.107629] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
>[    0.107633] system 00:0c: [mem 0x00100000-0x3dffffff] could not be reserved
>[    0.107637] system 00:0c: [mem 0xfff80000-0xffffffff] has been reserved
>[    0.107642] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.107866] pnp: PnP ACPI: found 13 devices
>[    0.107869] ACPI: ACPI bus type pnp unregistered
>[    0.145745] Switching to clocksource acpi_pm
>[    0.145791] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.145801] pci 0000:00:01.0:   bridge window [mem 0xfca00000-0xfeafffff]
>[    0.145807] pci 0000:00:01.0:   bridge window [mem 0xeff00000-0xf7efffff pref]
>[    0.145827] pci 0000:00:01.0: setting latency timer to 64
>[    0.145833] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>[    0.145837] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
>[    0.145841] pci_bus 0000:01: resource 1 [mem 0xfca00000-0xfeafffff]
>[    0.145844] pci_bus 0000:01: resource 2 [mem 0xeff00000-0xf7efffff pref]
>[    0.145907] NET: Registered protocol family 2
>[    0.145907] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.146401] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.147203] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.147337] TCP: reno registered
>[    0.147344] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.147371] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.147566] NET: Registered protocol family 1
>[    0.147610] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
>[    0.147781] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
>[    0.147798] pci 0000:01:00.0: Boot video device
>[    0.147802] PCI: CLS 32 bytes, default 64
>[    0.147915] Unpacking initramfs...
>[    0.708285] Freeing initrd memory: 17276k freed
>[    0.737492] apm: BIOS not found.
>[    0.737961] audit: initializing netlink socket (disabled)
>[    0.737990] type=2000 audit(1360009785.736:1): initialized
>[    0.760662] bounce pool size: 64 pages
>[    0.760683] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    0.763188] VFS: Disk quotas dquot_6.5.2
>[    0.763270] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.764029] msgmni has been set to 1726
>[    0.764139] SELinux:  Registering netfilter hooks
>[    0.765027] alg: No test for stdrng (krng)
>[    0.765042] NET: Registered protocol family 38
>[    0.765115] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    0.765170] io scheduler noop registered
>[    0.765174] io scheduler deadline registered
>[    0.765189] io scheduler cfq registered (default)
>[    0.765426] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.765464] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.765468] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.765879] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
>[    0.765882] vesafb: scrolling: redraw
>[    0.765885] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
>[    0.766381] vesafb: framebuffer at 0xf0000000, mapped to 0xf7c80000, using 5120k, total 5120k
>[    0.766537] Console: switching to colour frame buffer device 160x64
>[    0.860385] fb0: VESA VGA frame buffer device
>[    0.860537] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
>[    0.860546] ACPI: Sleep Button [SLPB]
>[    0.860606] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    0.860611] ACPI: Power Button [PWRB]
>[    0.860672] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    0.860677] ACPI: Power Button [PWRF]
>[    0.871254] GHES: HEST is not enabled!
>[    0.871383] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.892047] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    0.892736] Non-volatile memory driver v1.3
>[    0.892740] Linux agpgart interface v0.103
>[    0.892908] agpgart: Detected VIA VT3314 chipset
>[    0.896957] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
>[    0.898245] loop: module loaded
>[    0.898447] libphy: Fixed MDIO Bus: probed
>[    0.898524] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.898570] ehci_hcd 0000:00:10.4: EHCI Host Controller
>[    0.898634] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>[    0.898721] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebffc00
>[    0.904028] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
>[    0.904068] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.904072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.904076] usb usb1: Product: EHCI Host Controller
>[    0.904079] usb usb1: Manufacturer: Linux 3.7.3-101.fc17.i686 ehci_hcd
>[    0.904082] usb usb1: SerialNumber: 0000:00:10.4
>[    0.904250] hub 1-0:1.0: USB hub found
>[    0.904260] hub 1-0:1.0: 8 ports detected
>[    0.904466] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.904485] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.904521] uhci_hcd 0000:00:10.0: UHCI Host Controller
>[    0.904596] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>[    0.904623] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00
>[    0.904666] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.904670] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.904673] usb usb2: Product: UHCI Host Controller
>[    0.904676] usb usb2: Manufacturer: Linux 3.7.3-101.fc17.i686 uhci_hcd
>[    0.904679] usb usb2: SerialNumber: 0000:00:10.0
>[    0.904843] hub 2-0:1.0: USB hub found
>[    0.904850] hub 2-0:1.0: 2 ports detected
>[    0.904964] uhci_hcd 0000:00:10.1: UHCI Host Controller
>[    0.905050] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>[    0.905080] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d880
>[    0.905124] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.905128] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.905131] usb usb3: Product: UHCI Host Controller
>[    0.905134] usb usb3: Manufacturer: Linux 3.7.3-101.fc17.i686 uhci_hcd
>[    0.905137] usb usb3: SerialNumber: 0000:00:10.1
>[    0.905281] hub 3-0:1.0: USB hub found
>[    0.905288] hub 3-0:1.0: 2 ports detected
>[    0.905398] uhci_hcd 0000:00:10.2: UHCI Host Controller
>[    0.905466] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>[    0.905492] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
>[    0.905533] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.905537] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.905540] usb usb4: Product: UHCI Host Controller
>[    0.905543] usb usb4: Manufacturer: Linux 3.7.3-101.fc17.i686 uhci_hcd
>[    0.905546] usb usb4: SerialNumber: 0000:00:10.2
>[    0.905687] hub 4-0:1.0: USB hub found
>[    0.905693] hub 4-0:1.0: 2 ports detected
>[    0.905806] uhci_hcd 0000:00:10.3: UHCI Host Controller
>[    0.905876] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>[    0.905902] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d480
>[    0.905942] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.905946] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.905949] usb usb5: Product: UHCI Host Controller
>[    0.905952] usb usb5: Manufacturer: Linux 3.7.3-101.fc17.i686 uhci_hcd
>[    0.905955] usb usb5: SerialNumber: 0000:00:10.3
>[    0.906113] hub 5-0:1.0: USB hub found
>[    0.906119] hub 5-0:1.0: 2 ports detected
>[    0.906309] usbcore: registered new interface driver usbserial
>[    0.906323] usbcore: registered new interface driver usbserial_generic
>[    0.906335] usbserial: USB Serial support registered for generic
>[    0.906402] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    0.906405] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    0.906604] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.906731] mousedev: PS/2 mouse device common for all mice
>[    0.907083] rtc_cmos 00:02: RTC can wake from S4
>[    0.907345] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    0.907404] rtc0: alarms up to one year, y3k, 114 bytes nvram
>[    0.907559] device-mapper: uevent: version 1.0.3
>[    0.907672] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
>[    0.907756] cpuidle: using governor ladder
>[    0.907760] cpuidle: using governor menu
>[    0.908109] EFI Variables Facility v0.08 2004-May-17
>[    0.908279] usbcore: registered new interface driver usbhid
>[    0.908282] usbhid: USB HID core driver
>[    0.908323] drop_monitor: Initializing network drop monitor service
>[    0.908463] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    0.908508] TCP: cubic registered
>[    0.908512] Initializing XFRM netlink socket
>[    0.908688] NET: Registered protocol family 10
>[    0.908958] mip6: Mobile IPv6
>[    0.908962] NET: Registered protocol family 17
>[    0.909332] Using IPI No-Shortcut mode
>[    0.909482] PM: Hibernation image not present or could not be loaded.
>[    0.909498] registered taskstats version 1
>[    0.909989]   Magic number: 1:323:497
>[    0.910138] rtc_cmos 00:02: setting system clock to 2013-02-04 20:29:46 UTC (1360009786)
>[    0.910200] ondemand governor failed, too long transition latency of HW, fallback to performance governor
>[    0.910216] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>[    0.910374] Freeing unused kernel memory: 636k freed
>[    0.911149] Write protecting the kernel text: 5552k
>[    0.911203] Write protecting the kernel read-only data: 2172k
>[    0.928397] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    0.997715] dracut: dracut-018-105.git20120927.fc17
>[    1.046610] dracut: rd.luks=0: removing cryptoluks activation
>[    1.083670] udevd[106]: starting version 182
>[    1.173306] dracut: Starting plymouth daemon
>[    1.206046] usb 1-1: new high-speed USB device number 2 using ehci_hcd
>[    1.339566] usb 1-1: New USB device found, idVendor=148f, idProduct=5370
>[    1.339581] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.339590] usb 1-1: Product: 802.11 n WLAN
>[    1.339599] usb 1-1: Manufacturer: Ralink
>[    1.339608] usb 1-1: SerialNumber: 1.0
>[    1.394417] dracut: rd.dm=0: removing DM RAID activation
>[    1.414783] dracut: rd.md=0: removing MD RAID activation
>[    1.444040] usb 1-3: new high-speed USB device number 3 using ehci_hcd
>[    1.586146] pata_via 0000:00:0f.1: version 0.3.4
>[    1.591389] scsi0 : pata_via
>[    1.594060] scsi1 : pata_via
>[    1.596847] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>[    1.596855] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>[    1.597415] sata_via 0000:00:0f.0: version 2.6
>[    1.597497] sata_via 0000:00:0f.0: routed to hard irq line 11
>[    1.598110] scsi2 : sata_via
>[    1.599998] scsi3 : sata_via
>[    1.601748] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 20
>[    1.601757] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 20
>[    1.690980] usb 1-3: New USB device found, idVendor=1d0f, idProduct=0601
>[    1.690988] usb 1-3: New USB device strings: Mfr=16, Product=96, SerialNumber=0
>[    1.690994] usb 1-3: Product: USB2.0_Camera
>[    1.690997] usb 1-3: Manufacturer: PixArt Imaging Inc.
>[    1.800624] ata1.00: ATA-7: MAXTOR STM3802110A, 3.AAK, max UDMA/100
>[    1.800631] ata1.00: 156301488 sectors, multi 16: LBA48 
>[    1.802030] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>[    1.858799] ata1.00: configured for UDMA/100
>[    1.859017] scsi 0:0:0:0: Direct-Access     ATA      MAXTOR STM380211 3.AA PQ: 0 ANSI: 5
>[    1.859440] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>[    1.859546] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.859563] sd 0:0:0:0: [sda] Write Protect is off
>[    1.859572] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.859627] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.906748]  sda: sda1 sda2
>[    1.907377] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.956027] usb 3-2: new low-speed USB device number 2 using uhci_hcd
>[    2.030952] ata2.00: ATAPI: CRD-8400B, 1.03, max UDMA/33
>[    2.031023] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
>[    2.031031] ata2.00: device is on DMA blacklist, disabling DMA
>[    2.031603] ata2.00: configured for PIO4
>[    2.053303] ata2.01: configured for UDMA/33
>[    2.055976] scsi 1:0:0:0: CD-ROM            LG       CD-ROM CRD-8400B 1.03 PQ: 0 ANSI: 5
>[    2.057159] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
>[    2.057163] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    2.057407] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    2.057623] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    1.859819] ACPI: Invalid Power Resource to register!
>[    2.057938] ACPI: Invalid Power Resource to register!<5>[    2.061777] scsi 1:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
>[    2.067911] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    2.068191] sr 1:0:1:0: Attached scsi CD-ROM sr1
>[    2.068439] sr 1:0:1:0: Attached scsi generic sg2 type 5
>[    2.116134] usb 3-2: New USB device found, idVendor=0458, idProduct=003a
>[    2.116140] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.116144] usb 3-2: Product: Optical Mouse
>[    2.116148] usb 3-2: Manufacturer: Genius
>[    2.143976] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input4
>[    2.144277] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:10.1-2/input0
>[    2.269029] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    2.423345] ata4.00: ATA-7: WDC WD2500JS-60MHB5, 10.02E04, max UDMA/100
>[    2.423352] ata4.00: 488397168 sectors, multi 16: LBA48 
>[    2.426303] ata4.00: configured for UDMA/100
>[    2.426508] scsi 3:0:0:0: Direct-Access     ATA      WDC WD2500JS-60M 10.0 PQ: 0 ANSI: 5
>[    2.426915] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>[    2.427024] sd 3:0:0:0: Attached scsi generic sg3 type 0
>[    2.427051] sd 3:0:0:0: [sdb] Write Protect is off
>[    2.427060] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.427114] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.068810] ACPI: Invalid Power Resource to register!
>[    2.427344] ACPI: Invalid Power Resource to register!<6>[    2.445723]  sdb: unknown partition table
>[    2.446105] sd 3:0:0:0: [sdb] Attached SCSI disk
>[    2.738638] dracut: Scanning devices sda2  for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root
>[    2.815927] dracut: inactive '/dev/VolGroup/lv_swap' [1.94 GiB] inherit
>[    2.816319] dracut: inactive '/dev/VolGroup/lv_home' [36.50 GiB] inherit
>[    2.816550] dracut: inactive '/dev/VolGroup/lv_root' [35.59 GiB] inherit
>[    2.915550] bio: create slab <bio-1> at 1
>[    3.361074] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
>[    3.361080] EXT4-fs (dm-1): write access will be enabled during recovery
>[    3.946939] EXT4-fs (dm-1): recovery complete
>[    3.983121] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    4.073624] dracut: Checking ext4: /dev/mapper/VolGroup-lv_root
>[    4.073967] dracut: issuing e2fsck -a  /dev/mapper/VolGroup-lv_root
>[    4.185523] dracut: _Fedora-17-i686-: clean, 141368/2334720 files, 1477291/9330688 blocks
>[    4.186933] dracut: Remounting /dev/mapper/VolGroup-lv_root with -o ro
>[    4.254754] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    4.297731] dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
>[    4.508720] dracut: Switching root
>[    5.296774] type=1404 audit(1360009790.885:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>[    5.521282] SELinux: 2048 avtab hash slots, 103863 rules.
>[    5.551571] SELinux: 2048 avtab hash slots, 103863 rules.
>[    5.899638] SELinux:  9 users, 15 roles, 4229 types, 233 bools, 1 sens, 1024 cats
>[    5.899648] SELinux:  83 classes, 103863 rules
>[    5.908514] SELinux:  Permission wake_alarm in class capability2 not defined in policy.
>[    5.908523] SELinux:  Permission block_suspend in class capability2 not defined in policy.
>[    5.908533] SELinux: the above unknown classes and permissions will be allowed
>[    5.908554] SELinux:  Completing initialization.
>[    5.908555] SELinux:  Setting up existing superblocks.
>[    5.908577] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    5.908587] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>[    5.908612] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>[    5.908623] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[    5.908638] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    5.908667] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>[    5.909385] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>[    5.909393] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>[    5.911091] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>[    5.911114] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>[    5.911120] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>[    5.911154] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    5.911162] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[    5.911175] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>[    5.911202] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    5.911961] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    5.911971] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    5.912056] SELinux: initialized (dev dm-1, type ext4), uses xattr
>[    5.912359] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>[    5.942029] type=1403 audit(1360009791.531:3): policy loaded auid=4294967295 ses=4294967295
>[    5.950119] systemd[1]: Successfully loaded SELinux policy in 700ms 819us.
>[    6.071643] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.081064] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.197178] systemd[1]: Relabelled /dev and /run in 115ms 898us.
>[    6.234085] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.242064] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.250090] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.258040] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.266039] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.274036] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.282081] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.290035] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.290157] systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
>[    6.319862] systemd[1]: Set hostname to <serveur>.
>[    8.019186] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[    8.076409] systemd[1]: media.mount: Directory /media to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)
>[    8.545241] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    8.546378] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
>[    8.546593] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    8.965352] udevd[388]: starting version 182
>[    8.978573] EXT4-fs (dm-1): re-mounted. Opts: (null)
>[    9.100114] systemd-journald[384]: Fixed max_use=48.5M max_size=6.0M min_size=64.0K keep_free=24.2M
>[    9.100765] systemd-journald[384]: Vacuuming...
>[   11.832331] microcode: CPU0 sig=0xf49, pf=0x10, revision=0x3
>[   11.869372] microcode: CPU1 sig=0xf49, pf=0x10, revision=0x3
>[   11.869659] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   11.893200] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
>[   11.897703] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0xfebff800, 00:16:ec:86:1f:6a, IRQ 23
>[   12.049236] parport_pc 00:07: reported by Plug and Play ACPI
>[   12.049353] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>[   12.057388] ppdev: user-space parallel port driver
>[   12.691876] media: Linux media interface: v0.10
>[   12.694118] Linux video capture interface: v2.00
>[   12.698161] uvcvideo: Found UVC 1.00 device USB2.0_Camera (1d0f:0601)
>[   12.745511] input: USB2.0_Camera as /devices/pci0000:00/0000:00:10.4/usb1/1-3/1-3:1.0/input/input5
>[   12.745797] usbcore: registered new interface driver uvcvideo
>[   12.745803] USB Video Class driver (1.1.1)
>[   12.985439] snd_via82xx 0000:00:11.5: setting latency timer to 64
>[   13.123879] ALSA sound/usb/clock.c:243 current rate 15872 is different from the runtime rate 16000
>[   13.127254] ALSA sound/usb/clock.c:243 current rate 47872 is different from the runtime rate 48000
>[   13.128930] ALSA sound/usb/mixer.c:887 5:2: cannot get min/max values for control 2 (id 5)
>[   13.129414] usbcore: registered new interface driver snd-usb-audio
>[   14.314280] Adding 2031612k swap on /dev/mapper/VolGroup-lv_swap.  Priority:0 extents:1 across:2031612k 
>[   14.673834] cfg80211: Calling CRDA to update world regulatory domain
>[   14.959852] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
>[   14.959875] SELinux: initialized (dev sdb, type ext4), uses xattr
>[   16.344035] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
>[   16.375321] cfg80211: World regulatory domain updated:
>[   16.375328] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   16.375331] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   16.375335] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   16.375337] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   16.375340] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   16.375343] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   16.692157] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[   16.692683] Registered led device: rt2800usb-phy0::radio
>[   16.692736] Registered led device: rt2800usb-phy0::assoc
>[   16.692786] Registered led device: rt2800usb-phy0::quality
>[   16.692930] usbcore: registered new interface driver rt2800usb
>[   18.493956] cfg80211: Calling CRDA for country: DZ
>[   18.498850] cfg80211: Regulatory domain changed to country: DZ
>[   18.498857] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   18.498860] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   18.722056] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[   18.861155] SELinux: initialized (dev sda1, type ext4), uses xattr
>[   23.990819] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
>[   23.990839] SELinux: initialized (dev dm-2, type ext4), uses xattr
>[   26.980544] it87: Found IT8705F chip at 0x290, revision 3
>[   26.980696] it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
>[   27.123445] nf_conntrack version 0.5.0 (15545 buckets, 62180 max)
>[   27.151182] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   28.026816] Bluetooth: Core ver 2.16
>[   28.026982] NET: Registered protocol family 31
>[   28.026986] Bluetooth: HCI device and connection manager initialized
>[   28.027061] Bluetooth: HCI socket layer initialized
>[   28.027070] Bluetooth: L2CAP socket layer initialized
>[   28.027087] Bluetooth: SCO socket layer initialized
>[   28.057672] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   28.057681] Bluetooth: BNEP filters: protocol multicast
>[   28.057703] Bluetooth: BNEP socket layer initialized
>[   28.090610] RPC: Registered named UNIX socket transport module.
>[   28.090620] RPC: Registered udp transport module.
>[   28.090623] RPC: Registered tcp transport module.
>[   28.090627] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   28.385957] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   29.353788] [drm] Initialized drm 1.1.0 20060810
>[   29.356669] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[   29.356675] [drm] No driver support for vblank timestamp query.
>[   29.356682] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
>[   29.372656] agpgart-via 0000:00:00.0: AGP 3.5 bridge
>[   29.372697] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
>[   29.372798] pci 0000:01:00.0: putting AGP V3 device into 8x mode
>[   30.496766] wlan0: authenticate with 00:21:63:29:cf:42
>[   30.516915] wlan0: send auth to 00:21:63:29:cf:42 (try 1/3)
>[   30.518317] wlan0: authenticated
>[   30.519237] rt2800usb 1-1:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
>[   30.519245] rt2800usb 1-1:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
>[   30.520066] wlan0: associate with 00:21:63:29:cf:42 (try 1/3)
>[   30.522064] wlan0: RX AssocResp from 00:21:63:29:cf:42 (capab=0x411 status=0 aid=2)
>[   30.528795] wlan0: associated
>[   30.528864] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[   32.681177] fuse init (API version 7.20)
>[   32.693049] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[   32.727741] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>[   33.980682] ALSA sound/usb/clock.c:243 current rate 47872 is different from the runtime rate 48000
>[   33.982441] ALSA sound/usb/clock.c:243 current rate 47872 is different from the runtime rate 48000
>[   34.006457] ALSA sound/usb/clock.c:243 current rate 47872 is different from the runtime rate 48000
>[   34.008201] ALSA sound/usb/clock.c:243 current rate 47872 is different from the runtime rate 48000

Actions: View

Attachments on bug 908783: 694511 | 694512 | 694513 | 694514 | 694515 | 694516