Attachment 695697 Details for Bug 879823 – my kernel.spec which couldn't compile

my kernel.spec which couldn't compile

kernel.spec (text/x-rpm-spec), 81.10 KB, created by Mikhail on 2013-02-10 09:39:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mikhail

Created: 2013-02-10 09:39:16 UTC

Size: 81.10 KB

patch

obsolete

># We have to override the new %%install behavior because, well... the kernel is special.
>%global __spec_install_pre %{___build_pre}
>
>Summary: The Linux kernel
>
># For a stable, released kernel, released_kernel should be 1. For rawhide
># and/or a kernel built from an rc or git snapshot, released_kernel should
># be 0.
>%global released_kernel 1
>
># Sign modules on x86.  Make sure the config files match this setting if more
># architectures are added.
>%ifarch %{ix86} x86_64
>%global signmodules 1
>%else
>%global signmodules 0
>%endif
>
># Save original buildid for later if it's defined
>%if 0%{?buildid:1}
>%global orig_buildid %{buildid}
>%undefine buildid
>%endif
>
>###################################################################
># Polite request for people who spin their own kernel rpms:
># please modify the "buildid" define in a way that identifies
># that the kernel isn't the stock distribution kernel, for example,
># by setting the define to ".local" or ".bz123456". This will be
># appended to the full kernel version.
>#
># (Uncomment the '#' and both spaces below to set the buildid.)
>#
># % define buildid .local
>###################################################################
>
># The buildid can also be specified on the rpmbuild command line
># by adding --define="buildid .whatever". If both the specfile and
># the environment define a buildid they will be concatenated together.
>%if 0%{?orig_buildid:1}
>%if 0%{?buildid:1}
>%global srpm_buildid %{buildid}
>%define buildid %{srpm_buildid}%{orig_buildid}
>%else
>%define buildid %{orig_buildid}
>%endif
>%endif
>
># baserelease defines which build revision of this kernel version we're
># building.  We used to call this fedora_build, but the magical name
># baserelease is matched by the rpmdev-bumpspec tool, which you should use.
>#
># We used to have some extra magic weirdness to bump this automatically,
># but now we don't.  Just use: rpmdev-bumpspec -c 'comment for changelog'
># When changing base_sublevel below or going from rc to a final kernel,
># reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec).
># scripts/rebase.sh should be made to do that for you, actually.
>#
># NOTE: baserelease must be > 0 or bad things will happen if you switch
>#       to a released kernel (released version will be < rc version)
>#
># For non-released -rc kernels, this will be appended after the rcX and
># gitX tags, so a 3 here would become part of release "0.rcX.gitX.3"
>#
>%global baserelease 202
>%global fedora_build %{baserelease}
>
># base_sublevel is the kernel version we're starting with and patching
># on top of -- for example, 3.1-rc7-git1 starts with a 3.0 base,
># which yields a base_sublevel of 0.
>%define base_sublevel 7
>
>## If this is a released kernel ##
>%if 0%{?released_kernel}
>
># Do we have a -stable update to apply?
>%define stable_update 5
># Is it a -stable RC?
>%define stable_rc 0
># Set rpm version accordingly
>%if 0%{?stable_update}
>%define stablerev %{stable_update}
>%define stable_base %{stable_update}
>%if 0%{?stable_rc}
># stable RCs are incremental patches, so we need the previous stable patch
>%define stable_base %(echo $((%{stable_update} - 1)))
>%endif
>%endif
>%define rpmversion 3.%{base_sublevel}.%{stable_update}
>
>## The not-released-kernel case ##
>%else
># The next upstream release sublevel (base_sublevel+1)
>%define upstream_sublevel %(echo $((%{base_sublevel} + 1)))
># The rc snapshot level
>%define rcrev 0
># The git snapshot level
>%define gitrev 0
># Set rpm version accordingly
>%define rpmversion 3.%{upstream_sublevel}.0
>%endif
># Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below.
>
># What parts do we want to build?  We must build at least one kernel.
># These are the kernels that are built IF the architecture allows it.
># All should default to 1 (enabled) and be flipped to 0 (disabled)
># by later arch-specific checks.
>
># The following build options are enabled by default.
># Use either --without <opt> in your rpmbuild command or force values
># to 0 in here to disable them.
>#
># standard kernel
>%define with_up        %{?_without_up:        0} %{?!_without_up:        1}
># kernel-smp (only valid for ppc 32-bit)
>%define with_smp       %{?_without_smp:       0} %{?!_without_smp:       1}
># kernel-PAE (only valid for i686)
>%define with_pae       %{?_without_pae:       0} %{?!_without_pae:       1}
># kernel-debug
>%define with_debug     %{?_without_debug:     0} %{?!_without_debug:     1}
># kernel-doc
>%define with_doc       %{?_without_doc:       0} %{?!_without_doc:       1}
># kernel-headers
>%define with_headers   %{?_without_headers:   0} %{?!_without_headers:   1}
># perf
>%define with_perf      %{?_without_perf:      0} %{?!_without_perf:      1}
># tools
>%define with_tools     %{?_without_tools:     0} %{?!_without_tools:     1}
># kernel-debuginfo
>%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
># kernel-bootwrapper (for creating zImages from kernel + initrd)
>%define with_bootwrapper %{?_without_bootwrapper: 0} %{?!_without_bootwrapper: 1}
># Want to build a the vsdo directories installed
>%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
># ARM OMAP (Beagle/Panda Board)
>%define with_omap      %{?_without_omap:      0} %{?!_without_omap:      1}
># kernel-tegra (only valid for arm)
>%define with_tegra       %{?_without_tegra:       0} %{?!_without_tegra:       1}
># kernel-kirkwood (only valid for arm)
>%define with_kirkwood       %{?_without_kirkwood:       0} %{?!_without_kirkwood:       1}
>#
># Additional options for user-friendly one-off kernel building:
>#
># Only build the base kernel (--with baseonly):
>%define with_baseonly  %{?_with_baseonly:     1} %{?!_with_baseonly:     0}
># Only build the smp kernel (--with smponly):
>%define with_smponly   %{?_with_smponly:      1} %{?!_with_smponly:      0}
># Only build the pae kernel (--with paeonly):
>%define with_paeonly   %{?_with_paeonly:      1} %{?!_with_paeonly:      0}
># Only build the debug kernel (--with dbgonly):
>%define with_dbgonly   %{?_with_dbgonly:      1} %{?!_with_dbgonly:      0}
>#
># should we do C=1 builds with sparse
>%define with_sparse    %{?_with_sparse:       1} %{?!_with_sparse:       0}
>#
># build a release kernel on rawhide
>%define with_release   %{?_with_release:      1} %{?!_with_release:      0}
>
># Set debugbuildsenabled to 1 for production (build separate debug kernels)
>#  and 0 for rawhide (all kernels are debug kernels).
># See also 'make debug' and 'make release'.
>%define debugbuildsenabled 1
>
># Want to build a vanilla kernel build without any non-upstream patches?
>%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
>
># Build the kernel-doc package, but don't fail the build if it botches.
># Here "true" means "continue" and "false" means "fail the build".
>%if 0%{?released_kernel}
>%define doc_build_fail false
>%else
>%define doc_build_fail true
>%endif
>
>%define rawhide_skip_docs 0
>%if 0%{?rawhide_skip_docs}
>%define with_doc 0
>%define doc_build_fail true
>%endif
>
># pkg_release is what we'll fill in for the rpm Release: field
>%if 0%{?released_kernel}
>
>%if 0%{?stable_rc}
>%define stable_rctag .rc%{stable_rc}
>%define pkg_release 0%{stable_rctag}.%{fedora_build}%{?buildid}%{?dist}
>%else
>%define pkg_release %{fedora_build}%{?buildid}%{?dist}
>%endif
>
>%else
>
># non-released_kernel
>%if 0%{?rcrev}
>%define rctag .rc%rcrev
>%else
>%define rctag .rc0
>%endif
>%if 0%{?gitrev}
>%define gittag .git%gitrev
>%else
>%define gittag .git0
>%endif
>%define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist}
>
>%endif
>
># The kernel tarball/base version
>%define kversion 3.%{base_sublevel}
>
>%define make_target bzImage
>
>%define KVERREL %{version}-%{release}.%{_target_cpu}
>%define hdrarch %_target_cpu
>%define asmarch %_target_cpu
>
>%if 0%{!?nopatches:1}
>%define nopatches 0
>%endif
>
>%if %{with_vanilla}
># Vanilla kernels before 3.7 don't contain modsign support.  Remove this when
># we rebase to 3.7
>%define signmodules 0
>%define nopatches 1
>%endif
>
>%if %{nopatches}
>%define with_bootwrapper 0
>%define variant -vanilla
>%else
>%define variant_fedora -fedora
>%endif
>
>%define using_upstream_branch 0
>%if 0%{?upstream_branch:1}
>%define stable_update 0
>%define using_upstream_branch 1
>%define variant -%{upstream_branch}%{?variant_fedora}
>%define pkg_release 0.%{fedora_build}%{upstream_branch_tag}%{?buildid}%{?dist}
>%endif
>
>%if !%{debugbuildsenabled}
>%define with_debug 0
>%endif
>
>%if !%{with_debuginfo}
>%define _enable_debug_packages 0
>%endif
>%define debuginfodir /usr/lib/debug
>
># kernel-PAE is only built on i686.
>%ifnarch i686
>%define with_pae 0
>%endif
>
># kernel up (versatile express), tegra and  omap are only built on armv7 hfp/sfp
>%ifnarch armv7hl armv7l
>%define with_omap 0
>%define with_tegra 0
>%endif
>
># kernel-kirkwood is only built for armv5
>%ifnarch armv5tel
>%define with_kirkwood 0
>%endif
>
># if requested, only build base kernel
>%if %{with_baseonly}
>%define with_smp 0
>%define with_pae 0
>%define with_debug 0
>%endif
>
># if requested, only build smp kernel
>%if %{with_smponly}
>%define with_up 0
>%define with_pae 0
>%define with_debug 0
>%endif
>
># if requested, only build pae kernel
>%if %{with_paeonly}
>%define with_up 0
>%define with_smp 0
>%define with_debug 0
>%endif
>
># if requested, only build debug kernel
>%if %{with_dbgonly}
>%if %{debugbuildsenabled}
>%define with_up 0
>%define with_pae 0
>%endif
>%define with_smp 0
>%define with_pae 0
>%define with_tools 0
>%define with_perf 0
>%endif
>
>%define all_x86 i386 i686
>
>%if %{with_vdso_install}
># These arches install vdso/ directories.
>%define vdso_arches %{all_x86} x86_64 ppc ppc64 ppc64p7 s390 s390x
>%endif
>
># Overrides for generic default options
>
># only ppc needs a separate smp kernel
>%ifnarch ppc 
>%define with_smp 0
>%endif
>
># don't do debug builds on anything but i686 and x86_64
>%ifnarch i686 x86_64
>%define with_debug 0
>%endif
>
># only package docs noarch
>%ifnarch noarch
>%define with_doc 0
>%endif
>
># don't build noarch kernels or headers (duh)
>%ifarch noarch
>%define with_up 0
>%define with_headers 0
>%define with_tools 0
>%define with_perf 0
>%define all_arch_configs kernel-%{version}-*.config
>%endif
>
># bootwrapper is only on ppc
>%ifnarch ppc ppc64 ppc64p7
>%define with_bootwrapper 0
>%endif
>
># sparse blows up on ppc64 and sparc64
>%ifarch ppc64 ppc sparc64 ppc64p7
>%define with_sparse 0
>%endif
>
># Per-arch tweaks
>
>%ifarch %{all_x86}
>%define asmarch x86
>%define hdrarch i386
>%define all_arch_configs kernel-%{version}-i?86*.config
>%define image_install_path boot
>%define kernel_image arch/x86/boot/bzImage
>%endif
>
>%ifarch x86_64
>%define asmarch x86
>%define all_arch_configs kernel-%{version}-x86_64*.config
>%define image_install_path boot
>%define kernel_image arch/x86/boot/bzImage
>%endif
>
>%ifarch ppc64 ppc64p7
>%define asmarch powerpc
>%define hdrarch powerpc
>%define all_arch_configs kernel-%{version}-ppc64*.config
>%define image_install_path boot
>%define make_target vmlinux
>%define kernel_image vmlinux
>%define kernel_image_elf 1
>%endif
>
>%ifarch s390x
>%define asmarch s390
>%define hdrarch s390
>%define all_arch_configs kernel-%{version}-s390x.config
>%define image_install_path boot
>%define make_target image
>%define kernel_image arch/s390/boot/image
>%define with_tools 0
>%endif
>
>%ifarch sparc64
>%define asmarch sparc
>%define all_arch_configs kernel-%{version}-sparc64*.config
>%define make_target vmlinux
>%define kernel_image vmlinux
>%define image_install_path boot
>%define with_tools 0
>%endif
>
>%ifarch sparcv9
>%define hdrarch sparc
>%endif
>
>%ifarch ppc
>%define asmarch powerpc
>%define hdrarch powerpc
>%define all_arch_configs kernel-%{version}-ppc{-,.}*config
>%define image_install_path boot
>%define make_target vmlinux
>%define kernel_image vmlinux
>%define kernel_image_elf 1
>%endif
>
>%ifarch %{arm}
>%define all_arch_configs kernel-%{version}-arm*.config
>%define image_install_path boot
>%define asmarch arm
>%define hdrarch arm
>%define make_target bzImage
>%define kernel_image arch/arm/boot/zImage
># we only build headers/perf/tools on the base arm arches
># just like we used to only build them on i386 for x86
>%ifarch armv5tel
>%define with_up 0
>%endif
>%ifnarch armv5tel armv7hl
>%define with_headers 0
>%define with_perf 0
>%define with_tools 0
>%endif
>%endif
>
># Should make listnewconfig fail if there's config options
># printed out?
>%if %{nopatches}%{using_upstream_branch}
>%define listnewconfig_fail 0
>%else
>%define listnewconfig_fail 1
>%endif
>
># To temporarily exclude an architecture from being built, add it to
># %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
># don't build kernel-headers then the new build system will no longer let
># us use the previous build of that package -- it'll just be completely AWOL.
># Which is a BadThing(tm).
>
># We only build kernel-headers on the following...
>%define nobuildarches i386 s390 sparc sparcv9
>
>%ifarch %nobuildarches
>%define with_up 0
>%define with_smp 0
>%define with_pae 0
>%define with_debuginfo 0
>%define with_perf 0
>%define with_tools 0
>%define _enable_debug_packages 0
>%endif
>
>%define with_pae_debug 0
>%if %{with_pae}
>%define with_pae_debug %{with_debug}
>%endif
>
># Architectures we build tools/cpupower on
>%define cpupowerarchs %{ix86} x86_64 ppc ppc64 ppc64p7 %{arm}
>
>#
># Three sets of minimum package version requirements in the form of Conflicts:
># to versions below the minimum
>#
>
>#
># First the general kernel 2.6 required versions as per
># Documentation/Changes
>#
>%define kernel_dot_org_conflicts  ppp < 2.4.3-3, isdn4k-utils < 3.2-32, nfs-utils < 1.2.5-7.fc17, e2fsprogs < 1.37-4, util-linux < 2.12, jfsutils < 1.1.7-2, reiserfs-utils < 3.6.19-2, xfsprogs < 2.6.13-4, procps < 3.2.5-6.3, oprofile < 0.9.1-2, device-mapper-libs < 1.02.63-2, mdadm < 3.2.1-5
>
>#
># Then a series of requirements that are distribution specific, either
># because we add patches for something, or the older versions have
># problems with the newer kernel or lack certain things that make
># integration in the distro harder than needed.
>#
>%define package_conflicts initscripts < 7.23, udev < 063-6, iptables < 1.3.2-1, ipw2200-firmware < 2.4, iwl4965-firmware < 228.57.2, selinux-policy-targeted < 1.25.3-14, squashfs-tools < 4.0, wireless-tools < 29-3
>
># We moved the drm include files into kernel-headers, make sure there's
># a recent enough libdrm-devel on the system that doesn't have those.
>%define kernel_headers_conflicts libdrm-devel < 2.4.0-0.15
>
>#
># Packages that need to be installed before the kernel is, because the %%post
># scripts use them.
>#
>%define kernel_prereq  fileutils, module-init-tools >= 3.16-4, initscripts >= 8.11.1-1, grubby >= 8.3-1
>%define initrd_prereq  dracut >= 001-7
>
>#
># This macro does requires, provides, conflicts, obsoletes for a kernel package.
>#	%%kernel_reqprovconf <subpackage>
># It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
># macros defined above.
>#
>%define kernel_reqprovconf \
>Provides: kernel = %{rpmversion}-%{pkg_release}\
>Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:.%{1}}\
>Provides: kernel-drm = 4.3.0\
>Provides: kernel-drm-nouveau = 16\
>Provides: kernel-modeset = 1\
>Provides: kernel-uname-r = %{KVERREL}%{?1:.%{1}}\
>Requires(pre): %{kernel_prereq}\
>Requires(pre): %{initrd_prereq}\
>Requires(pre): linux-firmware >= 20120206-0.1.git06c8f81\
>Requires(post): /sbin/new-kernel-pkg\
>Requires(preun): /sbin/new-kernel-pkg\
>Conflicts: %{kernel_dot_org_conflicts}\
>Conflicts: %{package_conflicts}\
>%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
>%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
>%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
># We can't let RPM do the dependencies automatic because it'll then pick up\
># a correct but undesirable perl dependency from the module headers which\
># isn't required for the kernel proper to function\
>AutoReq: no\
>AutoProv: yes\
>%{nil}
>
>Name: kernel%{?variant}
>Group: System Environment/Kernel
>License: GPLv2 and Redistributable, no modification permitted
>URL: http://www.kernel.org/
>Version: %{rpmversion}
>Release: %{pkg_release}
># DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
># SET %%nobuildarches (ABOVE) INSTEAD
>ExclusiveArch: noarch %{all_x86} x86_64 ppc ppc64 ppc64p7 %{sparc} s390 s390x %{arm}
>ExclusiveOS: Linux
>
>%kernel_reqprovconf
>
>#
># List the packages used during the kernel build
>#
>BuildRequires: module-init-tools, patch >= 2.5.4, bash >= 2.03, sh-utils, tar
>BuildRequires: bzip2, xz, findutils, gzip, m4, perl, make >= 3.78, diffutils, gawk
>BuildRequires: gcc >= 3.4.2, binutils >= 2.12, redhat-rpm-config, hmaccalc
>BuildRequires: net-tools, hostname
>BuildRequires: xmlto, asciidoc
>%if %{with_sparse}
>BuildRequires: sparse >= 0.4.1
>%endif
>%if %{with_perf}
>BuildRequires: elfutils-devel zlib-devel binutils-devel newt-devel python-devel perl(ExtUtils::Embed) bison audit-libs-devel
>%endif
>%if %{with_tools}
>BuildRequires: pciutils-devel gettext
>%endif
>BuildConflicts: rhbuildsys(DiskFree) < 500Mb
>%if %{with_debuginfo}
># Fancy new debuginfo generation introduced in Fedora 8/RHEL 6.
># The -r flag to find-debuginfo.sh to invoke eu-strip --reloc-debug-sections
># reduces the number of relocations in kernel module .ko.debug files and was
># introduced with rpm 4.9 and elfutils 0.153.
>BuildRequires: rpm-build >= 4.9.0-1, elfutils >= elfutils-0.153-1
>%define debuginfo_args --strict-build-id -r
>%endif
>
>%if %{signmodules}
>BuildRequires: openssl
>BuildRequires: pesign >= 0.10-4
>%endif
>
>Source0: ftp://ftp.kernel.org/pub/linux/kernel/v3.0/linux-%{kversion}.tar.xz
>
>%if %{signmodules}
>Source11: x509.genkey
>%endif
>
>Source15: merge.pl
>Source16: mod-extra.list
>Source17: mod-extra.sh
>Source18: mod-extra-sign.sh
>
>Source19: Makefile.release
>Source20: Makefile.config
>Source21: config-debug
>Source22: config-nodebug
>Source23: config-generic
>
>Source30: config-x86-generic
>Source31: config-i686-PAE
>Source32: config-x86-32-generic
>
>Source40: config-x86_64-generic
>
>Source50: config-powerpc-generic
>Source51: config-powerpc32-generic
>Source52: config-powerpc32-smp
>Source53: config-powerpc64
>Source54: config-powerpc64p7
>
>Source70: config-s390x
>
>Source90: config-sparc64-generic
>
># Unified ARM kernels
>Source100: config-armv7
>
># Legacy ARM kernels
>Source105: config-arm-generic
>Source110: config-arm-omap
>Source111: config-arm-tegra
>Source112: config-arm-kirkwood
>
># This file is intentionally left empty in the stock kernel. Its a nicety
># added for those wanting to do custom rebuilds with altered config opts.
>Source1000: config-local
>
># Sources for kernel-tools
>Source2000: cpupower.service
>Source2001: cpupower.config
>
># Here should be only the patches up to the upstream canonical Linus tree.
>
># For a stable release kernel
>%if 0%{?stable_update}
>%if 0%{?stable_base}
>%define    stable_patch_00  patch-3.%{base_sublevel}.%{stable_base}.xz
>Patch00: %{stable_patch_00}
>%endif
>%if 0%{?stable_rc}
>%define    stable_patch_01  patch-3.%{base_sublevel}.%{stable_update}-rc%{stable_rc}.xz
>Patch01: %{stable_patch_01}
>%endif
>
># non-released_kernel case
># These are automagically defined by the rcrev and gitrev values set up
># near the top of this spec file.
>%else
>%if 0%{?rcrev}
>Patch00: patch-3.%{upstream_sublevel}-rc%{rcrev}.xz
>%if 0%{?gitrev}
>Patch01: patch-3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.xz
>%endif
>%else
># pre-{base_sublevel+1}-rc1 case
>%if 0%{?gitrev}
>Patch00: patch-3.%{base_sublevel}-git%{gitrev}.xz
>%endif
>%endif
>%endif
>
>%if %{using_upstream_branch}
>### BRANCH PATCH ###
>%endif
>
># we also need compile fixes for -vanilla
>Patch04: linux-2.6-compile-fixes.patch
>
># build tweak for build ID magic, even for -vanilla
>Patch05: linux-2.6-makefile-after_link.patch
>
>Patch06: power-x86-destdir.patch
>
>%if !%{nopatches}
>
>
># revert upstream patches we get via other methods
>Patch09: linux-2.6-upstream-reverts.patch
># Git trees.
>
># Standalone patches
>
>Patch100: taint-vbox.patch
>
>Patch110: vmbugon-warnon.patch
>
>Patch390: linux-2.6-defaults-acpi-video.patch
>Patch391: linux-2.6-acpi-video-dos.patch
>Patch394: linux-2.6-acpi-debug-infinite-loop.patch
>Patch396: acpi-sony-nonvs-blacklist.patch
>
>Patch450: linux-2.6-input-kill-stupid-messages.patch
>Patch452: linux-2.6.30-no-pcspkr-modalias.patch
>
>Patch460: linux-2.6-serial-460800.patch
>
>Patch470: die-floppy-die.patch
>
>Patch510: linux-2.6-silence-noise.patch
>Patch520: quite-apm.patch
>Patch530: linux-2.6-silence-fbcon-logo.patch
>Patch540: silence-empty-ipi-mask-warning.patch
>
>Patch700: linux-2.6-e1000-ich9-montevina.patch
>
>Patch800: linux-2.6-crash-driver.patch
>
># crypto/
>Patch901: modsign-post-KS-jwb.patch
>
># secure boot
>Patch1000: secure-boot-20121212.patch
>Patch1001: efivarfs-3.7.patch
>
># Improve PCI support on UEFI
>Patch1100: handle-efi-roms.patch
>
># virt + ksm patches
>
># DRM
>#atch1700: drm-edid-try-harder-to-fix-up-broken-headers.patch
>#Patch1800: drm-vgem.patch
>
># nouveau + drm fixes
># intel drm is all merged upstream
>Patch1824: drm-intel-next.patch
>Patch1825: drm-i915-dp-stfu.patch
>
># Quiet boot fixes
># silence the ACPI blacklist code
>Patch2802: linux-2.6-silence-acpi-blacklist.patch
>
># media patches
>Patch2899: linux-2.6-v4l-dvb-fixes.patch
>Patch2900: linux-2.6-v4l-dvb-update.patch
>Patch2901: linux-2.6-v4l-dvb-experimental.patch
>
># fs fixes
>
># NFSv4
>
># patches headed upstream
>Patch10000: fs-proc-devtree-remove_proc_entry.patch
>
>Patch12016: disable-i8042-check-on-apple-mac.patch
>
>Patch12303: dmar-disable-when-ricoh-multifunction.patch
>
>Patch13003: efi-dont-map-boot-services-on-32bit.patch
>
>Patch14000: hibernate-freeze-filesystems.patch
>
>Patch14010: lis3-improve-handling-of-null-rate.patch
>
>
>Patch20000: 0001-efifb-Skip-DMI-checks-if-the-bootloader-knows-what-i.patch
>Patch20001: 0002-x86-EFI-Calculate-the-EFI-framebuffer-size-instead-o.patch
>
># ARM
>Patch21000: arm-read_current_timer.patch
># http://lists.infradead.org/pipermail/linux-arm-kernel/2012-December/137164.html
>Patch21001: arm-l2x0-only-set-set_debug-on-pl310-r3p0-and-earlier.patch
>Patch21002: arm-alignment-faults.patch
>
># OMAP
>Patch21003: arm-fix-omapdrm.patch
>
># ARM tegra
>Patch21004: arm-tegra-nvec-kconfig.patch
>Patch21005: arm-tegra-usb-no-reset-linux33.patch
>Patch21006: arm-tegra-sdhci-module-fix.patch
>
>#rhbz 754518
>Patch21235: scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch
>
>Patch22000: weird-root-dentry-name-debug.patch
>
>#selinux ptrace child permissions
>Patch22001: selinux-apply-different-permission-to-ptrace-child.patch
>
>#rhbz 871078
>Patch22112: USB-report-submission-of-active-URBs.patch
>
>#rhbz 859485
>Patch21226: vt-Drop-K_OFF-for-VC_MUTE.patch
>
>#rhbz CVE-2012-4530 868285 880147
>Patch21229: exec-use-eloop-for-max-recursion-depth.patch
>
>#rhbz 851278
>Patch21231: 8139cp-revert-set-ring-address-before-enabling-receiver.patch
>Patch21232: 8139cp-set-ring-address-after-enabling-C-mode.patch
>Patch21233: 8139cp-re-enable-interrupts-after-tx-timeout.patch
>
>#rhbz 886946
>Patch21234: iwlegacy-fix-IBSS-cleanup.patch
>
>#rhbz 892428
>Patch21238: brcmsmac-updates-rhbz892428.patch
>
>#rhbz 863424
>Patch21239: Revert-iwlwifi-fix-the-reclaimed-packet-tracking-upon.patch
>
>#
>Patch99999: 0001-write-mbox-regs-twice-on-gen6.patch
>
># END OF PATCH DEFINITIONS
>
>%endif
>
>BuildRoot: %{_tmppath}/kernel-%{KVERREL}-root
>
>%description
>The kernel package contains the Linux kernel (vmlinuz), the core of any
>Linux operating system.  The kernel handles the basic functions
>of the operating system: memory allocation, process allocation, device
>input and output, etc.
>
>
>%package doc
>Summary: Various documentation bits found in the kernel source
>Group: Documentation
>%description doc
>This package contains documentation files from the kernel
>source. Various bits of information about the Linux kernel and the
>device drivers shipped with it are documented in these files.
>
>You'll want to install this package if you need a reference to the
>options that can be passed to Linux kernel modules at load time.
>
>
>%package headers
>Summary: Header files for the Linux kernel for use by glibc
>Group: Development/System
>Obsoletes: glibc-kernheaders < 3.0-46
>Provides: glibc-kernheaders = 3.0-46
>%description headers
>Kernel-headers includes the C header files that specify the interface
>between the Linux kernel and userspace libraries and programs.  The
>header files define structures and constants that are needed for
>building most standard programs and are also needed for rebuilding the
>glibc package.
>
>%package bootwrapper
>Summary: Boot wrapper files for generating combined kernel + initrd images
>Group: Development/System
>Requires: gzip binutils
>%description bootwrapper
>Kernel-bootwrapper contains the wrapper code which makes bootable "zImage"
>files combining both kernel and initial ramdisk.
>
>%package debuginfo-common-%{_target_cpu}
>Summary: Kernel source files used by %{name}-debuginfo packages
>Group: Development/Debug
>%description debuginfo-common-%{_target_cpu}
>This package is required by %{name}-debuginfo subpackages.
>It provides the kernel source files common to all builds.
>
>%if %{with_perf}
>%package -n perf
>Summary: Performance monitoring for the Linux kernel
>Group: Development/System
>License: GPLv2
>%description -n perf
>This package contains the perf tool, which enables performance monitoring
>of the Linux kernel.
>
>%package -n perf-debuginfo
>Summary: Debug information for package perf
>Group: Development/Debug
>Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
>AutoReqProv: no
>%description -n perf-debuginfo
>This package provides debug information for the perf package.
>
># Note that this pattern only works right to match the .build-id
># symlinks because of the trailing nonmatching alternation and
># the leading .*, because of find-debuginfo.sh's buggy handling
># of matching the pattern against the symlinks file.
>%{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|XXX' -o perf-debuginfo.list}
>
>%package -n python-perf
>Summary: Python bindings for apps which will manipulate perf events
>Group: Development/Libraries
>%description -n python-perf
>The python-perf package contains a module that permits applications
>written in the Python programming language to use the interface
>to manipulate perf events.
>
>%{!?python_sitearch: %global python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print get_python_lib(1)")}
>
>%package -n python-perf-debuginfo
>Summary: Debug information for package perf python bindings
>Group: Development/Debug
>Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
>AutoReqProv: no
>%description -n python-perf-debuginfo
>This package provides debug information for the perf python bindings.
>
># the python_sitearch macro should already be defined from above
>%{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{python_sitearch}/perf.so(\.debug)?|XXX' -o python-perf-debuginfo.list}
>
>
>%endif # with_perf
>
>%if %{with_tools}
>%package -n kernel-tools
>Summary: Assortment of tools for the Linux kernel
>Group: Development/System
>License: GPLv2
>Provides:  cpupowerutils = 1:009-0.6.p1
>Obsoletes: cpupowerutils < 1:009-0.6.p1
>Provides:  cpufreq-utils = 1:009-0.6.p1
>Provides:  cpufrequtils = 1:009-0.6.p1
>Obsoletes: cpufreq-utils < 1:009-0.6.p1
>Obsoletes: cpufrequtils < 1:009-0.6.p1
>Obsoletes: cpuspeed < 1:1.5-16
>Requires: kernel-tools-libs = %{version}-%{release}
>%description -n kernel-tools
>This package contains the tools/ directory from the kernel source
>and the supporting documentation.
>
>%package -n kernel-tools-libs
>Summary: Libraries for the kernels-tools
>Group: Development/System
>License: GPLv2
>%description -n kernel-tools-libs
>This package contains the libraries built from the tools/ directory
>from the kernel source.
>
>%package -n kernel-tools-libs-devel
>Summary: Assortment of tools for the Linux kernel
>Group: Development/System
>License: GPLv2
>Requires: kernel-tools = %{version}-%{release}
>Provides:  cpupowerutils-devel = 1:009-0.6.p1
>Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
>Requires: kernel-tools-libs = %{version}-%{release}
>Provides: kernel-tools-devel
>%description -n kernel-tools-libs-devel
>This package contains the development files for the tools/ directory from
>the kernel source.
>
>%package -n kernel-tools-debuginfo
>Summary: Debug information for package kernel-tools
>Group: Development/Debug
>Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
>AutoReqProv: no
>%description -n kernel-tools-debuginfo
>This package provides debug information for package kernel-tools.
>
># Note that this pattern only works right to match the .build-id
># symlinks because of the trailing nonmatching alternation and
># the leading .*, because of find-debuginfo.sh's buggy handling
># of matching the pattern against the symlinks file.
>%{expand:%%global debuginfo_args %{?debuginfo_args} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|XXX' -o kernel-tools-debuginfo.list}
>
>%endif # with_tools
>
>
>#
># This macro creates a kernel-<subpackage>-debuginfo package.
>#	%%kernel_debuginfo_package <subpackage>
>#
>%define kernel_debuginfo_package() \
>%package %{?1:%{1}-}debuginfo\
>Summary: Debug information for package %{name}%{?1:-%{1}}\
>Group: Development/Debug\
>Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
>Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
>AutoReqProv: no\
>%description -n %{name}%{?1:-%{1}}-debuginfo\
>This package provides debug information for package %{name}%{?1:-%{1}}.\
>This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
>%{expand:%%global debuginfo_args %{?debuginfo_args} -p '/.*/%%{KVERREL}%{?1:\.%{1}}/.*|/.*%%{KVERREL}%{?1:\.%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
>%{nil}
>
>#
># This macro creates a kernel-<subpackage>-devel package.
>#	%%kernel_devel_package <subpackage> <pretty-name>
>#
>%define kernel_devel_package() \
>%package %{?1:%{1}-}devel\
>Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
>Group: System Environment/Kernel\
>Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
>Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:.%{1}}\
>Provides: kernel-devel = %{version}-%{release}%{?1:.%{1}}\
>Provides: kernel-devel-uname-r = %{KVERREL}%{?1:.%{1}}\
>AutoReqProv: no\
>Requires(pre): /usr/bin/find\
>Requires: perl\
>%description -n kernel%{?variant}%{?1:-%{1}}-devel\
>This package provides kernel headers and makefiles sufficient to build modules\
>against the %{?2:%{2} }kernel package.\
>%{nil}
>
>#
># This macro creates a kernel-<subpackage>-modules-extra package.
>#	%%kernel_modules-extra_package <subpackage> <pretty-name>
>#
>%define kernel_modules-extra_package() \
>%package %{?1:%{1}-}modules-extra\
>Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
>Group: System Environment/Kernel\
>Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
>Provides: kernel-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:.%{1}}\
>Provides: kernel-modules-extra = %{version}-%{release}%{?1:.%{1}}\
>Provides: installonlypkg(kernel-module)\
>Provides: kernel-modules-extra-uname-r = %{KVERREL}%{?1:.%{1}}\
>Requires: kernel-uname-r = %{KVERREL}%{?1:.%{1}}\
>AutoReqProv: no\
>%description -n kernel%{?variant}%{?1:-%{1}}-modules-extra\
>This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
>%{nil}
>
>#
># This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
>#	%%define variant_summary The Linux kernel compiled for <configuration>
>#	%%kernel_variant_package [-n <pretty-name>] <subpackage>
>#
>%define kernel_variant_package(n:) \
>%package %1\
>Summary: %{variant_summary}\
>Group: System Environment/Kernel\
>%kernel_reqprovconf\
>%{expand:%%kernel_devel_package %1 %{!?-n:%1}%{?-n:%{-n*}}}\
>%{expand:%%kernel_modules-extra_package %1 %{!?-n:%1}%{?-n:%{-n*}}}\
>%{expand:%%kernel_debuginfo_package %1}\
>%{nil}
>
>
># First the auxiliary packages of the main kernel package.
>%kernel_devel_package
>%kernel_modules-extra_package
>%kernel_debuginfo_package
>
>
># Now, each variant package.
>
>%define variant_summary The Linux kernel compiled for SMP machines
>%kernel_variant_package -n SMP smp
>%description smp
>This package includes a SMP version of the Linux kernel. It is
>required only on machines with two or more CPUs as well as machines with
>hyperthreading technology.
>
>Install the kernel-smp package if your machine uses two or more CPUs.
>
>
>%define variant_summary The Linux kernel compiled for PAE capable machines
>%kernel_variant_package PAE
>%description PAE
>This package includes a version of the Linux kernel with support for up to
>64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
>The non-PAE kernel can only address up to 4GB of memory.
>Install the kernel-PAE package if your machine has more than 4GB of memory.
>
>
>%define variant_summary The Linux kernel compiled with extra debugging enabled for PAE capable machines
>%kernel_variant_package PAEdebug
>Obsoletes: kernel-PAE-debug
>%description PAEdebug
>This package includes a version of the Linux kernel with support for up to
>64GB of high memory. It requires a CPU with Physical Address Extensions (PAE).
>The non-PAE kernel can only address up to 4GB of memory.
>Install the kernel-PAE package if your machine has more than 4GB of memory.
>
>This variant of the kernel has numerous debugging options enabled.
>It should only be installed when trying to gather additional information
>on kernel bugs, as some of these options impact performance noticably.
>
>
>%define variant_summary The Linux kernel compiled with extra debugging enabled
>%kernel_variant_package debug
>%description debug
>The kernel package contains the Linux kernel (vmlinuz), the core of any
>Linux operating system.  The kernel handles the basic functions
>of the operating system:  memory allocation, process allocation, device
>input and output, etc.
>
>This variant of the kernel has numerous debugging options enabled.
>It should only be installed when trying to gather additional information
>on kernel bugs, as some of these options impact performance noticably.
>
>%define variant_summary The Linux kernel compiled for marvell kirkwood boards
>%kernel_variant_package kirkwood
>%description kirkwood
>This package includes a version of the Linux kernel with support for
>marvell kirkwood based systems, i.e., guruplug, sheevaplug
>
>%define variant_summary The Linux kernel compiled for TI-OMAP boards
>%kernel_variant_package omap
>%description omap
>This package includes a version of the Linux kernel with support for
>TI-OMAP based systems, i.e., BeagleBoard-xM.
>
>%define variant_summary The Linux kernel compiled for tegra boards
>%kernel_variant_package tegra
>%description tegra
>This package includes a version of the Linux kernel with support for
>nvidia tegra based systems, i.e., trimslice, ac-100.
>
>
>%prep
># do a few sanity-checks for --with *only builds
>%if %{with_baseonly}
>%if !%{with_up}%{with_pae}
>echo "Cannot build --with baseonly, up build is disabled"
>exit 1
>%endif
>%endif
>
>%if %{with_smponly}
>%if !%{with_smp}
>echo "Cannot build --with smponly, smp build is disabled"
>exit 1
>%endif
>%endif
>
>%if "%{baserelease}" == "0"
>echo "baserelease must be greater than zero"
>exit 1
>%endif
>
># more sanity checking; do it quietly
>if [ "%{patches}" != "%%{patches}" ] ; then
>  for patch in %{patches} ; do
>    if [ ! -f $patch ] ; then
>      echo "ERROR: Patch  ${patch##/*/}  listed in specfile but is missing"
>      exit 1
>    fi
>  done
>fi 2>/dev/null
>
>patch_command='patch -p1 -F1 -s'
>ApplyPatch()
>{
>  local patch=$1
>  shift
>  if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
>    exit 1
>  fi
>%if !%{using_upstream_branch}
>  if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%%{?variant}}.spec ; then
>    if [ "${patch:0:8}" != "patch-3." ] ; then
>      echo "ERROR: Patch  $patch  not listed as a source patch in specfile"
>      exit 1
>    fi
>  fi 2>/dev/null
>%endif
>  case "$patch" in
>  *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
>  *.gz)  gunzip  < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
>  *.xz)  unxz    < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
>  *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
>  esac
>}
>
># don't apply patch if it's empty
>ApplyOptionalPatch()
>{
>  local patch=$1
>  shift
>  if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
>    exit 1
>  fi
>  local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
>  if [ "$C" -gt 9 ]; then
>    ApplyPatch $patch ${1+"$@"}
>  fi
>}
>
># First we unpack the kernel tarball.
># If this isn't the first make prep, we use links to the existing clean tarball
># which speeds things up quite a bit.
>
># Update to latest upstream.
>%if 0%{?released_kernel}
>%define vanillaversion 3.%{base_sublevel}
># non-released_kernel case
>%else
>%if 0%{?rcrev}
>%define vanillaversion 3.%{upstream_sublevel}-rc%{rcrev}
>%if 0%{?gitrev}
>%define vanillaversion 3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}
>%endif
>%else
># pre-{base_sublevel+1}-rc1 case
>%if 0%{?gitrev}
>%define vanillaversion 3.%{base_sublevel}-git%{gitrev}
>%else
>%define vanillaversion 3.%{base_sublevel}
>%endif
>%endif
>%endif
>
># %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3
># %%{kversion}       : the base version, e.g. 2.6.34
>
># Use kernel-%%{kversion}%%{?dist} as the top-level directory name
># so we can prep different trees within a single git directory.
>
># Build a list of the other top-level kernel tree directories.
># This will be used to hardlink identical vanilla subdirs.
>sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-3.*' \
>            | grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||:
>
># Delete all old stale trees.
>if [ -d kernel-%{kversion}%{?dist} ]; then
>  cd kernel-%{kversion}%{?dist}
>  for i in linux-*
>  do
>     if [ -d $i ]; then
>       # Just in case we ctrl-c'd a prep already
>       rm -rf deleteme.%{_target_cpu}
>       # Move away the stale away, and delete in background.
>       mv $i deleteme-$i
>       rm -rf deleteme* &
>     fi
>  done
>  cd ..
>fi
>
># Generate new tree
>if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then
>
>  if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then
>
>    # The base vanilla version already exists.
>    cd kernel-%{kversion}%{?dist}
>
>    # Any vanilla-* directories other than the base one are stale.
>    for dir in vanilla-*; do
>      [ "$dir" = vanilla-%{kversion} ] || rm -rf $dir &
>    done
>
>  else
>
>    rm -f pax_global_header
>    # Look for an identical base vanilla dir that can be hardlinked.
>    for sharedir in $sharedirs ; do
>      if [[ ! -z $sharedir  &&  -d $sharedir/vanilla-%{kversion} ]] ; then
>        break
>      fi
>    done
>    if [[ ! -z $sharedir  &&  -d $sharedir/vanilla-%{kversion} ]] ; then
>%setup -q -n kernel-%{kversion}%{?dist} -c -T
>      cp -rl $sharedir/vanilla-%{kversion} .
>    else
>%setup -q -n kernel-%{kversion}%{?dist} -c
>      mv linux-%{kversion} vanilla-%{kversion}
>    fi
>
>  fi
>
>%if "%{kversion}" != "%{vanillaversion}"
>
>  for sharedir in $sharedirs ; do
>    if [[ ! -z $sharedir  &&  -d $sharedir/vanilla-%{vanillaversion} ]] ; then
>      break
>    fi
>  done
>  if [[ ! -z $sharedir  &&  -d $sharedir/vanilla-%{vanillaversion} ]] ; then
>
>    cp -rl $sharedir/vanilla-%{vanillaversion} .
>
>  else
>
>    # Need to apply patches to the base vanilla version.
>    cp -rl vanilla-%{kversion} vanilla-%{vanillaversion}
>    cd vanilla-%{vanillaversion}
>
># Update vanilla to the latest upstream.
># (non-released_kernel case only)
>%if 0%{?rcrev}
>    ApplyPatch patch-3.%{upstream_sublevel}-rc%{rcrev}.xz
>%if 0%{?gitrev}
>    ApplyPatch patch-3.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.xz
>%endif
>%else
># pre-{base_sublevel+1}-rc1 case
>%if 0%{?gitrev}
>    ApplyPatch patch-3.%{base_sublevel}-git%{gitrev}.xz
>%endif
>%endif
>
>    cd ..
>
>  fi
>
>%endif
>
>else
>
>  # We already have all vanilla dirs, just change to the top-level directory.
>  cd kernel-%{kversion}%{?dist}
>
>fi
>
># Now build the fedora kernel tree.
>cp -rl vanilla-%{vanillaversion} linux-%{KVERREL}
>
>cd linux-%{KVERREL}
>
># released_kernel with possible stable updates
>%if 0%{?stable_base}
>ApplyPatch %{stable_patch_00}
>%endif
>%if 0%{?stable_rc}
>ApplyPatch %{stable_patch_01}
>%endif
>
>%if %{using_upstream_branch}
>### BRANCH APPLY ###
>%endif
>
># Drop some necessary files from the source dir into the buildroot
>cp $RPM_SOURCE_DIR/config-* .
>cp %{SOURCE15} .
>
>%if !%{debugbuildsenabled}
>%if %{with_release}
># The normal build is a really debug build and the user has explicitly requested
># a release kernel. Change the config files into non-debug versions.
>make -f %{SOURCE19} config-release
>%endif
>%endif
>
># Dynamically generate kernel .config files from config-* files
>make -f %{SOURCE20} VERSION=%{version} configs
>
># Merge in any user-provided local config option changes
>%if %{?all_arch_configs:1}%{!?all_arch_configs:0}
>for i in %{all_arch_configs}
>do
>  mv $i $i.tmp
>  ./merge.pl %{SOURCE1000} $i.tmp > $i
>  rm $i.tmp
>done
>%endif
>
>ApplyPatch linux-2.6-makefile-after_link.patch
>
>#
># misc small stuff to make things compile
>#
>ApplyOptionalPatch linux-2.6-compile-fixes.patch
>
>ApplyPatch power-x86-destdir.patch
>
>%if !%{nopatches}
>
># revert patches from upstream that conflict or that we get via other means
>ApplyOptionalPatch linux-2.6-upstream-reverts.patch -R
>
>
>ApplyPatch taint-vbox.patch
>
>ApplyPatch vmbugon-warnon.patch
>
># Architecture patches
># x86(-64)
>
>#
># ARM
>#
>#ApplyPatch arm-read_current_timer.patch
>#ApplyPatch arm-fix-omapdrm.patch
>
>ApplyPatch arm-l2x0-only-set-set_debug-on-pl310-r3p0-and-earlier.patch
>ApplyPatch arm-tegra-nvec-kconfig.patch
>ApplyPatch arm-tegra-usb-no-reset-linux33.patch
>ApplyPatch arm-tegra-sdhci-module-fix.patch
>ApplyPatch arm-alignment-faults.patch
>
>#
># bugfixes to drivers and filesystems
>#
>
># ext4
>
># xfs
>
># btrfs
>
># eCryptfs
>
># NFSv4
>
># USB
>
># WMI
>
># ACPI
>ApplyPatch linux-2.6-defaults-acpi-video.patch
>ApplyPatch linux-2.6-acpi-video-dos.patch
>ApplyPatch linux-2.6-acpi-debug-infinite-loop.patch
>ApplyPatch acpi-sony-nonvs-blacklist.patch
>
>#
># PCI
>#
>
>#
># SCSI Bits.
>#
>
># ACPI
>
># ALSA
>
># Networking
>
># Misc fixes
># The input layer spews crap no-one cares about.
>ApplyPatch linux-2.6-input-kill-stupid-messages.patch
>
># stop floppy.ko from autoloading during udev...
>ApplyPatch die-floppy-die.patch
>
>ApplyPatch linux-2.6.30-no-pcspkr-modalias.patch
>
># Allow to use 480600 baud on 16C950 UARTs
>ApplyPatch linux-2.6-serial-460800.patch
>
># Silence some useless messages that still get printed with 'quiet'
>ApplyPatch linux-2.6-silence-noise.patch
>
># Make fbcon not show the penguins with 'quiet'
>ApplyPatch linux-2.6-silence-fbcon-logo.patch
>
># no-one cares about these warnings.
>ApplyPatch silence-empty-ipi-mask-warning.patch
>
># Changes to upstream defaults.
>
>
># /dev/crash driver.
>ApplyPatch linux-2.6-crash-driver.patch
>
># Hack e1000e to work on Montevina SDV
>ApplyPatch linux-2.6-e1000-ich9-montevina.patch
>
># crypto/
>ApplyPatch modsign-post-KS-jwb.patch
>
># secure boot
>ApplyPatch efivarfs-3.7.patch
>ApplyPatch secure-boot-20121212.patch
>
># Improved PCI support for UEFI
>ApplyPatch handle-efi-roms.patch
>
># Assorted Virt Fixes
>
># DRM core
>#ApplyPatch drm-edid-try-harder-to-fix-up-broken-headers.patch
>#ApplyPatch drm-vgem.patch
>
># Nouveau DRM
>
># Intel DRM
>ApplyOptionalPatch drm-intel-next.patch
>ApplyPatch drm-i915-dp-stfu.patch
>
># silence the ACPI blacklist code
>ApplyPatch linux-2.6-silence-acpi-blacklist.patch
>ApplyPatch quite-apm.patch
>
># V4L/DVB updates/fixes/experimental drivers
>#  apply if non-empty
>ApplyOptionalPatch linux-2.6-v4l-dvb-fixes.patch
>ApplyOptionalPatch linux-2.6-v4l-dvb-update.patch
>ApplyOptionalPatch linux-2.6-v4l-dvb-experimental.patch
>
># Patches headed upstream
>ApplyPatch fs-proc-devtree-remove_proc_entry.patch
>
>ApplyPatch disable-i8042-check-on-apple-mac.patch
>
># rhbz#605888
>ApplyPatch dmar-disable-when-ricoh-multifunction.patch
>
>ApplyPatch efi-dont-map-boot-services-on-32bit.patch
>
># FIXME: REBASE
>#ApplyPatch hibernate-freeze-filesystems.patch
>
>ApplyPatch lis3-improve-handling-of-null-rate.patch
>
>#ApplyPatch 0001-efifb-Skip-DMI-checks-if-the-bootloader-knows-what-i.patch
>#ApplyPatch 0002-x86-EFI-Calculate-the-EFI-framebuffer-size-instead-o.patch
>
>#rhbz 754518
>ApplyPatch scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch
>
>ApplyPatch weird-root-dentry-name-debug.patch
>
>#selinux ptrace child permissions
>ApplyPatch selinux-apply-different-permission-to-ptrace-child.patch
>
>#rhbz 871078
>ApplyPatch USB-report-submission-of-active-URBs.patch
>
>#rhbz 859485
>ApplyPatch vt-Drop-K_OFF-for-VC_MUTE.patch
>
>#rhbz CVE-2012-4530 868285 880147
>ApplyPatch exec-use-eloop-for-max-recursion-depth.patch
>
>#rhbz 851278
>ApplyPatch 8139cp-revert-set-ring-address-before-enabling-receiver.patch -R
>ApplyPatch 8139cp-set-ring-address-after-enabling-C-mode.patch
>ApplyPatch 8139cp-re-enable-interrupts-after-tx-timeout.patch
>
>#rhbz 886948
>ApplyPatch iwlegacy-fix-IBSS-cleanup.patch
>
>#rhbz 892428
>ApplyPatch brcmsmac-updates-rhbz892428.patch
>
>#rhbz 863424
>ApplyPatch Revert-iwlwifi-fix-the-reclaimed-packet-tracking-upon.patch
>
>#
>ApplyPatch 0001-write-mbox-regs-twice-on-gen6.patch
>
># END OF PATCH APPLICATIONS
>
>%endif
>
># Any further pre-build tree manipulations happen here.
>
>chmod +x scripts/checkpatch.pl
>
># This Prevents scripts/setlocalversion from mucking with our version numbers.
>touch .scmversion
>
># only deal with configs if we are going to build for the arch
>%ifnarch %nobuildarches
>
>mkdir configs
>
># Remove configs not for the buildarch
>for cfg in kernel-%{version}-*.config; do
>  if [ `echo %{all_arch_configs} | grep -c $cfg` -eq 0 ]; then
>    rm -f $cfg
>  fi
>done
>
>%if !%{debugbuildsenabled}
>rm -f kernel-%{version}-*debug.config
>%endif
>
># now run oldconfig over all the config files
>for i in *.config
>do
>  mv $i .config
>  Arch=`head -1 .config | cut -b 3-`
>  make ARCH=$Arch listnewconfig | grep -E '^CONFIG_' >.newoptions || true
>%if %{listnewconfig_fail}
>  if [ -s .newoptions ]; then
>    cat .newoptions
>    exit 1
>  fi
>%endif
>  rm -f .newoptions
>  make ARCH=$Arch oldnoconfig
>  echo "# $Arch" > configs/$i
>  cat .config >> configs/$i
>done
># end of kernel config
>%endif
>
># get rid of unwanted files resulting from patch fuzz
>find . $ -name "*.orig" -o -name "*~" $ -exec rm -f {} \; >/dev/null
>
># remove unnecessary SCM files
>find . -name .gitignore -exec rm -f {} \; >/dev/null
>
>cd ..
>
>###
>### build
>###
>%build
>
>%if %{with_sparse}
>%define sparse_mflags	C=1
>%endif
>
>%if %{with_debuginfo}
># This override tweaks the kernel makefiles so that we run debugedit on an
># object before embedding it.  When we later run find-debuginfo.sh, it will
># run debugedit again.  The edits it does change the build ID bits embedded
># in the stripped object, but repeating debugedit is a no-op.  We do it
># beforehand to get the proper final build ID bits into the embedded image.
># This affects the vDSO images in vmlinux, and the vmlinux image in bzImage.
>export AFTER_LINK=\
>'sh -xc "/usr/lib/rpm/debugedit -b $$RPM_BUILD_DIR -d /usr/src/debug \
>    				-i $@ > $@.id"'
>%endif
>
>cp_vmlinux()
>{
>  eu-strip --remove-comment -o "$2" "$1"
>}
>
>BuildKernel() {
>    MakeTarget=$1
>    KernelImage=$2
>    Flavour=$3
>    InstallName=${4:-vmlinuz}
>
>    # Pick the right config file for the kernel we're building
>    Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config
>    DevelDir=/usr/src/kernels/%{KVERREL}${Flavour:+.${Flavour}}
>
>    # When the bootable image is just the ELF kernel, strip it.
>    # We already copy the unstripped file into the debuginfo package.
>    if [ "$KernelImage" = vmlinux ]; then
>      CopyKernel=cp_vmlinux
>    else
>      CopyKernel=cp
>    fi
>
>    KernelVer=%{version}-%{release}.%{_target_cpu}${Flavour:+.${Flavour}}
>    echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}...
>
>    %if 0%{?stable_update}
>    # make sure SUBLEVEL is incremented on a stable release.  Sigh 3.x.
>    perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile
>    %endif
>
>    # make sure EXTRAVERSION says what we want it to say
>    perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -%{release}.%{_target_cpu}${Flavour:+.${Flavour}}/" Makefile
>
>    # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
>    %if !0%{?rcrev}
>    %if 0%{?gitrev}
>    perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile
>    %endif
>    %endif
>
>    # and now to start the build process
>
>    make -s mrproper
>    cp configs/$Config .config
>
>    %if %{signmodules}
>    cp %{SOURCE11} .
>    chmod +x scripts/sign-file
>    %endif
>
>    Arch=`head -1 .config | cut -b 3-`
>    echo USING ARCH=$Arch
>
>    make -s ARCH=$Arch oldnoconfig >/dev/null
>%ifarch %{arm}
>    # http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
>    make -s ARCH=$Arch V=1 %{?_smp_mflags} $MakeTarget %{?sparse_mflags} KALLSYMS_EXTRA_PASS=1
>
>    make -s ARCH=$Arch V=1 dtbs
>    mkdir -p $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
>    install -m 644 arch/arm/boot/*.dtb $RPM_BUILD_ROOT/boot/dtb-$KernelVer/
>%else
>    make -s ARCH=$Arch V=1 %{?_smp_mflags} $MakeTarget %{?sparse_mflags}
>%endif
>    make -s ARCH=$Arch V=1 %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
>
>    # Start installing the results
>%if %{with_debuginfo}
>    mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/boot
>    mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
>%endif
>    mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
>    install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
>    install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
>
>    # We estimate the size of the initramfs because rpm needs to take this size
>    # into consideration when performing disk space calculations. (See bz #530778)
>    dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
>
>    if [ -f arch/$Arch/boot/zImage.stub ]; then
>      cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
>    fi
>    %if %{signmodules}
>    # Sign the image if we're using EFI
>    %pesign -s -i $KernelImage -o vmlinuz.signed
>    mv vmlinuz.signed $KernelImage
>    %endif
>    $CopyKernel $KernelImage \
>    		$RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
>    chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
>
>    # hmac sign the kernel for FIPS
>    echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
>    ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
>    sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
>
>    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
>    # Override $(mod-fw) because we don't want it to install any firmware
>    # we'll get it from the linux-firmware package and we don't want conflicts
>    make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer mod-fw=
>
>%ifarch %{vdso_arches}
>    make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
>    if [ ! -s ldconfig-kernel.conf ]; then
>      echo > ldconfig-kernel.conf "\
># Placeholder file, no vDSO hwcap entries used in this kernel."
>    fi
>    %{__install} -D -m 444 ldconfig-kernel.conf \
>        $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
>%endif
>
>    # And save the headers/makefiles etc for building modules against
>    #
>    # This all looks scary, but the end result is supposed to be:
>    # * all arch relevant include/ files
>    # * all Makefile/Kconfig files
>    # * all script/ files
>
>    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
>    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
>    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
>    (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
>    # dirs for additional modules per module-init-tools, kbuild/modules.txt
>    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra
>    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
>    # first copy everything
>    cp --parents `find  -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
>    cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
>    cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
>    if [ -s Module.markers ]; then
>      cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
>    fi
>    # then drop all but the needed Makefiles/Kconfig files
>    rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Documentation
>    rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
>    rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
>    cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
>    cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
>    if [ -d arch/$Arch/scripts ]; then
>      cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
>    fi
>    if [ -f arch/$Arch/*lds ]; then
>      cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
>    fi
>    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o
>    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o
>%ifarch ppc ppc64 ppc64p7
>    cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
>%endif
>    if [ -d arch/%{asmarch}/include ]; then
>      cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
>    fi
>    # include the machine specific headers for ARM variants, if available.
>%ifarch %{arm}
>    if [ -d arch/%{asmarch}/mach-${Flavour}/include ]; then
>      cp -a --parents arch/%{asmarch}/mach-${Flavour}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
>    fi
>%endif
>    cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
>
>    # Make sure the Makefile and version.h have a matching timestamp so that
>    # external modules can be built
>    touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h
>
>    # Copy .config to include/config/auto.conf so "make prepare" is unnecessary.
>    cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
>
>%if %{with_debuginfo}
>    if test -s vmlinux.id; then
>      cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
>    else
>      echo >&2 "*** ERROR *** no vmlinux build ID! ***"
>      exit 1
>    fi
>
>    #
>    # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
>    #
>    mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
>    cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
>%endif
>
>    find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
>
>    # mark modules executable so that strip-to-file can strip them
>    xargs --no-run-if-empty chmod u+x < modnames
>
>    # Generate a list of modules for block and networking.
>
>    grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
>    sed -n 's,^.*/$[^/]*\.ko$:  *U $.*$$,\1 \2,p' > drivers.undef
>
>    collect_modules_list()
>    {
>      sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
>      LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
>    }
>
>    collect_modules_list networking \
>    			 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe'
>    collect_modules_list block \
>    			 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler'
>    collect_modules_list drm \
>    			 'drm_open|drm_init'
>    collect_modules_list modesetting \
>    			 'drm_crtc_init'
>
>    # detect missing or incorrect license tags
>    rm -f modinfo
>    while read i
>    do
>      echo -n "${i#$RPM_BUILD_ROOT/lib/modules/$KernelVer/} " >> modinfo
>      /sbin/modinfo -l $i >> modinfo
>    done < modnames
>
>    grep -E -v \
>    	  'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' \
>	  modinfo && exit 1
>
>    rm -f modinfo modnames
>
>    # Call the modules-extra script to move things around
>    %{SOURCE17} $RPM_BUILD_ROOT/lib/modules/$KernelVer %{SOURCE16}
>
>%if %{signmodules}
>    # Save off the .tmp_versions/ directory.  We'll use it in the 
>    # __debug_install_post macro below to sign the right things
>    # Also save the signing keys so we actually sign the modules with the
>    # right key.
>    cp -r .tmp_versions .tmp_versions.sign${Flavour:+.${Flavour}}
>    cp signing_key.priv signing_key.priv.sign${Flavour:+.${Flavour}}
>    cp signing_key.x509 signing_key.x509.sign${Flavour:+.${Flavour}}
>%endif
>
>    # remove files that will be auto generated by depmod at rpm -i time
>    for i in alias alias.bin builtin.bin ccwmap dep dep.bin ieee1394map inputmap isapnpmap ofmap pcimap seriomap symbols symbols.bin usbmap devname softdep
>    do
>      rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$i
>    done
>
>    # Move the devel headers out of the root file system
>    mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
>    mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
>
>    # This is going to create a broken link during the build, but we don't use
>    # it after this point.  We need the link to actually point to something
>    # when kernel-devel is installed, and a relative link doesn't work across
>    # the F17 UsrMove feature.
>    ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
>
>    # prune junk from kernel-devel
>    find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -exec rm -f {} \;
>}
>
>###
># DO it...
>###
>
># prepare directories
>rm -rf $RPM_BUILD_ROOT
>mkdir -p $RPM_BUILD_ROOT/boot
>mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
>
>cd linux-%{KVERREL}
>
>%if %{with_debug}
>BuildKernel %make_target %kernel_image debug
>%endif
>
>%if %{with_pae_debug}
>BuildKernel %make_target %kernel_image PAEdebug
>%endif
>
>%if %{with_pae}
>BuildKernel %make_target %kernel_image PAE
>%endif
>
>%if %{with_kirkwood}
>BuildKernel %make_target %kernel_image kirkwood
>%endif
>
>%if %{with_omap}
>BuildKernel %make_target %kernel_image omap
>%endif
>
>%if %{with_tegra}
>BuildKernel %make_target %kernel_image tegra
>%endif
>
>%if %{with_up}
>BuildKernel %make_target %kernel_image
>%endif
>
>%if %{with_smp}
>BuildKernel %make_target %kernel_image smp
>%endif
>
>%global perf_make \
>  make %{?_smp_mflags} -C tools/perf -s V=1 WERROR=0 HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix}
>%if %{with_perf}
># perf
>%{perf_make} all
>%{perf_make} man || %{doc_build_fail}
>%endif
>
>%if %{with_tools}
>%ifarch %{cpupowerarchs}
># cpupower
># make sure version-gen.sh is executable.
>chmod +x tools/power/cpupower/utils/version-gen.sh
>make %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false
>%ifarch %{ix86}
>    cd tools/power/cpupower/debug/i386
>    make %{?_smp_mflags} centrino-decode powernow-k8-decode
>    cd -
>%endif
>%ifarch x86_64
>    cd tools/power/cpupower/debug/x86_64
>    make %{?_smp_mflags} centrino-decode powernow-k8-decode
>    cd -
>%endif
>%ifarch %{ix86} x86_64
>   cd tools/power/x86/x86_energy_perf_policy/
>   make
>   cd -
>   cd tools/power/x86/turbostat
>   make
>   cd -
>%endif #turbostat/x86_energy_perf_policy
>%endif
>%endif
>
>%if %{with_doc}
># Make the HTML and man pages.
>make htmldocs mandocs || %{doc_build_fail}
>
># sometimes non-world-readable files sneak into the kernel source tree
>chmod -R a=rX Documentation
>find Documentation -type d | xargs chmod u+w
>%endif
>
>###
>### Special hacks for debuginfo subpackages.
>###
>
># This macro is used by %%install, so we must redefine it before that.
>%define debug_package %{nil}
>
># In the modsign case, we do 3 things.  1) We check the "flavour" and hard
># code the value in the following invocations.  This is somewhat sub-optimal
># but we're doing this inside of an RPM macro and it isn't as easy as it
># could be because of that.  2) We restore the .tmp_versions/ directory from
># the one we saved off in BuildKernel above.  This is to make sure we're
># signing the modules we actually built/installed in that flavour.  3) We
># grab the arch and invoke 'make modules_sign' and the mod-extra-sign.sh
># commands to actually sign the modules.
>#
># We have to do all of those things _after_ find-debuginfo runs, otherwise
># that will strip the signature off of the modules.
>
>%if %{with_debuginfo}
>%define __debug_install_post \
>  /usr/lib/rpm/find-debuginfo.sh %{debuginfo_args} %{_builddir}/%{?buildsubdir}\
>  if [ "%{signmodules}" == "1" ]; \
>  then \
>    if [ "%{with_pae}" != "0" ]; \
>    then \
>      Arch=`head -1 configs/kernel-%{version}-%{_target_cpu}-PAE.config | cut -b 3-` \
>      rm -rf .tmp_versions \
>      mv .tmp_versions.sign.PAE .tmp_versions \
>      mv signing_key.priv.sign.PAE signing_key.priv \
>      mv signing_key.x509.sign.PAE signing_key.x509 \
>      make -s ARCH=$Arch V=1 INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_sign KERNELRELEASE=%{KVERREL}.PAE \
>      %{SOURCE18} $RPM_BUILD_ROOT/lib/modules/%{KVERREL}.PAE/extra/ \
>    fi \
>    if [ "%{with_debug}" != "0" ]; \
>    then \
>      Arch=`head -1 configs/kernel-%{version}-%{_target_cpu}-debug.config | cut -b 3-` \
>      rm -rf .tmp_versions \
>      mv .tmp_versions.sign.debug .tmp_versions \
>      mv signing_key.priv.sign.debug signing_key.priv \
>      mv signing_key.x509.sign.debug signing_key.x509 \
>      make -s ARCH=$Arch V=1 INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_sign KERNELRELEASE=%{KVERREL}.debug \
>      %{SOURCE18} $RPM_BUILD_ROOT/lib/modules/%{KVERREL}.debug/extra/ \
>    fi \
>    if [ "%{with_pae_debug}" != "0" ]; \
>    then \
>      Arch=`head -1 configs/kernel-%{version}-%{_target_cpu}-PAEdebug.config | cut -b 3-` \
>      rm -rf .tmp_versions \
>      mv .tmp_versions.sign.PAEdebug .tmp_versions \
>      mv signing_key.priv.sign.PAEdebug signing_key.priv \
>      mv signing_key.x509.sign.PAEdebug signing_key.x509 \
>      make -s ARCH=$Arch V=1 INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_sign KERNELRELEASE=%{KVERREL}.PAEdebug \
>      %{SOURCE18} $RPM_BUILD_ROOT/lib/modules/%{KVERREL}.PAEdebug/extra/ \
>    fi \
>    if [ "%{with_up}" != "0" ]; \
>    then \
>      Arch=`head -1 configs/kernel-%{version}-%{_target_cpu}.config | cut -b 3-` \
>      rm -rf .tmp_versions \
>      mv .tmp_versions.sign .tmp_versions \
>      mv signing_key.priv.sign signing_key.priv \
>      mv signing_key.x509.sign signing_key.x509 \
>      make -s ARCH=$Arch V=1 INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_sign KERNELRELEASE=%{KVERREL} \
>      %{SOURCE18} $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/extra/ \
>    fi \
>  fi \
>%{nil}
>
>%ifnarch noarch
>%global __debug_package 1
>%files -f debugfiles.list debuginfo-common-%{_target_cpu}
>%defattr(-,root,root)
>%endif
>%endif
>
>###
>### install
>###
>
>%install
>
>cd linux-%{KVERREL}
>
>%if %{with_doc}
>docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion}
>man9dir=$RPM_BUILD_ROOT%{_datadir}/man/man9
>
># copy the source over
>mkdir -p $docdir
>tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
>
># Install man pages for the kernel API.
>mkdir -p $man9dir
>find Documentation/DocBook/man -name '*.9.gz' -print0 |
>xargs -0 --no-run-if-empty %{__install} -m 444 -t $man9dir $m
>ls $man9dir | grep -q '' || > $man9dir/BROKEN
>%endif # with_doc
>
># We have to do the headers install before the tools install because the
># kernel headers_install will remove any header files in /usr/include that
># it doesn't install itself.
>
>%if %{with_headers}
># Install kernel headers
>make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
>
># Do headers_check but don't die if it fails.
>make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_check \
>     > hdrwarnings.txt || :
>if grep -q exist hdrwarnings.txt; then
>   sed s:^$RPM_BUILD_ROOT/usr/include/:: hdrwarnings.txt
>   # Temporarily cause a build failure if header inconsistencies.
>   # exit 1
>fi
>
>find $RPM_BUILD_ROOT/usr/include \
>     $ -name .install -o -name .check -o \
>     	-name ..install.cmd -o -name ..check.cmd $ | xargs rm -f
>
># glibc provides scsi headers for itself, for now
>rm -rf $RPM_BUILD_ROOT/usr/include/scsi
>rm -f $RPM_BUILD_ROOT/usr/include/asm*/atomic.h
>rm -f $RPM_BUILD_ROOT/usr/include/asm*/io.h
>rm -f $RPM_BUILD_ROOT/usr/include/asm*/irq.h
>%endif
>
>%if %{with_perf}
># perf tool binary and supporting scripts/binaries
>%{perf_make} DESTDIR=$RPM_BUILD_ROOT install
>
># python-perf extension
>%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
>
># perf man pages (note: implicit rpm magic compresses them later)
>%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man || %{doc_build_fail}
>%endif
>
>%if %{with_tools}
>%ifarch %{cpupowerarchs}
>make -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
>rm -f %{buildroot}%{_libdir}/*.{a,la}
>%find_lang cpupower
>mv cpupower.lang ../
>%ifarch %{ix86}
>    cd tools/power/cpupower/debug/i386
>    install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
>    install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
>    cd -
>%endif
>%ifarch x86_64
>    cd tools/power/cpupower/debug/x86_64
>    install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
>    install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
>    cd -
>%endif
>chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
>mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
>install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
>install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
>%endif
>%ifarch %{ix86} x86_64
>   mkdir -p %{buildroot}%{_mandir}/man8
>   cd tools/power/x86/x86_energy_perf_policy
>   make DESTDIR=%{buildroot} install
>   cd -
>   cd tools/power/x86/turbostat
>   make DESTDIR=%{buildroot} install
>   cd -
>%endif #turbostat/x86_energy_perf_policy
>%endif
>
>%if %{with_bootwrapper}
>make DESTDIR=$RPM_BUILD_ROOT bootwrapper_install WRAPPER_OBJDIR=%{_libdir}/kernel-wrapper WRAPPER_DTSDIR=%{_libdir}/kernel-wrapper/dts
>%endif
>
>
>###
>### clean
>###
>
>%clean
>rm -rf $RPM_BUILD_ROOT
>
>###
>### scripts
>###
>
>%if %{with_tools}
>%post -n kernel-tools
>/sbin/ldconfig
>
>%postun -n kernel-tools
>/sbin/ldconfig
>%endif
>
>#
># This macro defines a %%post script for a kernel*-devel package.
>#	%%kernel_devel_post [<subpackage>]
>#
>%define kernel_devel_post() \
>%{expand:%%post %{?1:%{1}-}devel}\
>if [ -f /etc/sysconfig/kernel ]\
>then\
>    . /etc/sysconfig/kernel || exit $?\
>fi\
>if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]\
>then\
>    (cd /usr/src/kernels/%{KVERREL}%{?1:.%{1}} &&\
>     /usr/bin/find . -type f | while read f; do\
>       hardlink -c /usr/src/kernels/*.fc*.*/$f $f\
>     done)\
>fi\
>%{nil}
>
>#
># This macro defines a %%post script for a kernel*-modules-extra package.
>#	%%kernel_modules-extra_post [<subpackage>]
>#
>%define kernel_modules_extra_post() \
>%{expand:%%post %{?1:%{1}-}modules-extra}\
>/sbin/depmod -a %{KVERREL}%{?1:.%{1}}\
>%{nil}
>
># This macro defines a %%posttrans script for a kernel package.
>#	%%kernel_variant_posttrans [<subpackage>]
># More text can follow to go at the end of this variant's %%post.
>#
>%define kernel_variant_posttrans() \
>%{expand:%%posttrans %{?1}}\
>/sbin/new-kernel-pkg --package kernel%{?-v:-%{-v*}} --mkinitrd --dracut --depmod --update %{KVERREL}%{?-v:.%{-v*}} || exit $?\
>/sbin/new-kernel-pkg --package kernel%{?1:-%{1}} --rpmposttrans %{KVERREL}%{?1:.%{1}} || exit $?\
>%{nil}
>
>#
># This macro defines a %%post script for a kernel package and its devel package.
>#	%%kernel_variant_post [-v <subpackage>] [-r <replace>]
># More text can follow to go at the end of this variant's %%post.
>#
>%define kernel_variant_post(v:r:) \
>%{expand:%%kernel_devel_post %{?-v*}}\
>%{expand:%%kernel_modules_extra_post %{?-v*}}\
>%{expand:%%kernel_variant_posttrans %{?-v*}}\
>%{expand:%%post %{?-v*}}\
>%{-r:\
>if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
>   [ -f /etc/sysconfig/kernel ]; then\
>  /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
>fi}\
>%{expand:\
>/sbin/new-kernel-pkg --package kernel%{?-v:-%{-v*}} --install %{KVERREL}%{?-v:.%{-v*}} || exit $?\
>}\
>%{nil}
>
>#
># This macro defines a %%preun script for a kernel package.
>#	%%kernel_variant_preun <subpackage>
>#
>%define kernel_variant_preun() \
>%{expand:%%preun %{?1}}\
>/sbin/new-kernel-pkg --rminitrd --rmmoddep --remove %{KVERREL}%{?1:.%{1}} || exit $?\
>%{nil}
>
>%kernel_variant_preun
>%kernel_variant_post -r kernel-smp
>
>%kernel_variant_preun smp
>%kernel_variant_post -v smp
>
>%kernel_variant_preun PAE
>%kernel_variant_post -v PAE -r (kernel|kernel-smp)
>
>%kernel_variant_preun debug
>%kernel_variant_post -v debug
>
>%kernel_variant_post -v PAEdebug -r (kernel|kernel-smp)
>%kernel_variant_preun PAEdebug
>
>%kernel_variant_preun kirkwood
>%kernel_variant_post -v kirkwood
>
>%kernel_variant_preun omap
>%kernel_variant_post -v omap
>
>%kernel_variant_preun tegra
>%kernel_variant_post -v tegra
>
>if [ -x /sbin/ldconfig ]
>then
>    /sbin/ldconfig -X || exit $?
>fi
>
>###
>### file lists
>###
>
>%if %{with_headers}
>%files headers
>%defattr(-,root,root)
>/usr/include/*
>%endif
>
>%if %{with_bootwrapper}
>%files bootwrapper
>%defattr(-,root,root)
>/usr/sbin/*
>%{_libdir}/kernel-wrapper
>%endif
>
># only some architecture builds need kernel-doc
>%if %{with_doc}
>%files doc
>%defattr(-,root,root)
>%{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation/*
>%dir %{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation
>%dir %{_datadir}/doc/kernel-doc-%{rpmversion}
>%{_datadir}/man/man9/*
>%endif
>
>%if %{with_perf}
>%files -n perf
>%defattr(-,root,root)
>%{_bindir}/perf
>%dir %{_libexecdir}/perf-core
>%{_libexecdir}/perf-core/*
>%{_mandir}/man[1-8]/perf*
>%{_sysconfdir}/bash_completion.d/perf
>%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
>
>%files -n python-perf
>%defattr(-,root,root)
>%{python_sitearch}
>
>%if %{with_debuginfo}
>%files -f perf-debuginfo.list -n perf-debuginfo
>%defattr(-,root,root)
>
>%files -f python-perf-debuginfo.list -n python-perf-debuginfo
>%defattr(-,root,root)
>%endif
>%endif # with_perf
>
>%if %{with_tools}
>%files -n kernel-tools -f cpupower.lang
>%defattr(-,root,root)
>%ifarch %{cpupowerarchs}
>%{_bindir}/cpupower
>%ifarch %{ix86} x86_64
>%{_bindir}/centrino-decode
>%{_bindir}/powernow-k8-decode
>%endif
>%{_unitdir}/cpupower.service
>%{_mandir}/man[1-8]/cpupower*
>%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
>%ifarch %{ix86} x86_64
>%{_bindir}/x86_energy_perf_policy
>%{_mandir}/man8/x86_energy_perf_policy*
>%{_bindir}/turbostat
>%{_mandir}/man8/turbostat*
>%endif
>%endif
>
>%if %{with_debuginfo}
>%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
>%defattr(-,root,root)
>%endif
>
>%ifarch %{cpupowerarchs}
>%files -n kernel-tools-libs
>%{_libdir}/libcpupower.so.0
>%{_libdir}/libcpupower.so.0.0.0
>
>%files -n kernel-tools-libs-devel
>%{_libdir}/libcpupower.so
>%{_includedir}/cpufreq.h
>%endif
>%endif # with_perf
>
># This is %%{image_install_path} on an arch where that includes ELF files,
># or empty otherwise.
>%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
>
>#
># This macro defines the %%files sections for a kernel package
># and its devel and debuginfo packages.
>#	%%kernel_variant_files [-k vmlinux] <condition> <subpackage>
>#
>%define kernel_variant_files(k:) \
>%if %{1}\
>%{expand:%%files %{?2}}\
>%defattr(-,root,root)\
>/%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?2:.%{2}}\
>/%{image_install_path}/.vmlinuz-%{KVERREL}%{?2:.%{2}}.hmac \
>%ifarch %{arm}\
>/%{image_install_path}/dtb-%{KVERREL}%{?2:.%{2}} \
>%endif\
>%attr(600,root,root) /boot/System.map-%{KVERREL}%{?2:.%{2}}\
>/boot/config-%{KVERREL}%{?2:.%{2}}\
>%dir /lib/modules/%{KVERREL}%{?2:.%{2}}\
>/lib/modules/%{KVERREL}%{?2:.%{2}}/kernel\
>/lib/modules/%{KVERREL}%{?2:.%{2}}/build\
>/lib/modules/%{KVERREL}%{?2:.%{2}}/source\
>/lib/modules/%{KVERREL}%{?2:.%{2}}/updates\
>%ifarch %{vdso_arches}\
>/lib/modules/%{KVERREL}%{?2:.%{2}}/vdso\
>/etc/ld.so.conf.d/kernel-%{KVERREL}%{?2:.%{2}}.conf\
>%endif\
>/lib/modules/%{KVERREL}%{?2:.%{2}}/modules.*\
>%ghost /boot/initramfs-%{KVERREL}%{?2:.%{2}}.img\
>%{expand:%%files %{?2:%{2}-}devel}\
>%defattr(-,root,root)\
>/usr/src/kernels/%{KVERREL}%{?2:.%{2}}\
>%{expand:%%files %{?2:%{2}-}modules-extra}\
>%defattr(-,root,root)\
>/lib/modules/%{KVERREL}%{?2:.%{2}}/extra\
>%if %{with_debuginfo}\
>%ifnarch noarch\
>%{expand:%%files -f debuginfo%{?2}.list %{?2:%{2}-}debuginfo}\
>%defattr(-,root,root)\
>%endif\
>%endif\
>%endif\
>%{nil}
>
>
>%kernel_variant_files %{with_up}
>%kernel_variant_files %{with_smp} smp
>%kernel_variant_files %{with_debug} debug
>%kernel_variant_files %{with_pae} PAE
>%kernel_variant_files %{with_pae_debug} PAEdebug
>%kernel_variant_files %{with_kirkwood} kirkwood
>%kernel_variant_files %{with_omap} omap
>%kernel_variant_files %{with_tegra} tegra
>
># plz don't put in a version string unless you're going to tag
># and build.
>
>#  ___________________________________________________________
># / This branch is for Fedora 18. You probably want to commit \
># \ to the F-17 branch instead, or in addition to this one.   /
>#  -----------------------------------------------------------
>#         \   ^__^
>#          \  (@@)\_______
>#             (__)\       )\/\
>#                 ||----w |
>#                 ||     ||
>%changelog
>* Mon Jan 28 2013 Josh Boyer <jwboyer@redhat.com> - 3.7.5-201
>- Linux v3.7.5
>- Add patch to fix iwlwifi issues (rhbz 863424)
>
>* Sun Jan 27 2013 Peter Robinson <pbrobinson@fedoraproject.org>
>- Build and package dtbs on ARM
>- Enable FB options for qemu vexpress on unified
>
>* Fri Jan 25 2013 Justin M. Forbes <jforbes@redhat.com>
>- Turn off THP for 32bit
>
>* Wed Jan 23 2013 Justin M. Forbes <jforbes@redhat.com> - 3.7.4-204
>- brcmsmac fixes from upstream (rhbz 892428)
>
>* Wed Jan 23 2013 Dave Jones <davej@redhat.com>
>- Remove warnings about empty IPI masks.
>
>* Tue Jan 22 2013 Justin M. Forbes <jforbes@redhat.com> - 3.7.4-203
>- Add i915 bugfix from airlied
>
>* Tue Jan 22 2013 Peter Robinson <pbrobinson@fedoraproject.org>
>- Apply ARM errata fix
>- disable HVC_DCC and VIRTIO_CONSOLE on ARM
>
>* Tue Jan 22 2013 Josh Boyer <jwboyer@redhat.com>
>- Fix libata settings bug (rhbz 902523)
>
>* Mon Jan 21 2013 Josh Boyer <jwboyer@redhat.com> - 3.7.4-201
>- Linux v3.7.4
>
>* Fri Jan 18 2013 Justin M. Forbes <jforbes@redhat.com> 3.7.3-201
>- Linux v3.7.3
>
>* Thu Jan 17 2013 Peter Robinson <pbrobinson@fedoraproject.org>
>- Merge 3.7 ARM kernel including unified kernel
>- Drop separate IMX and highbank kernels
>- Disable ARM PL310 errata that crash highbank
>
>* Wed Jan 16 2013 Josh Boyer <jwboyer@redhat.com>
>- Fix power management sysfs on non-secure boot machines (rhbz 896243)
>
>* Wed Jan 16 2013 Justin M. Forbes <jforbes@redhat.com>  3.7.2-204
>- Fix for CVE-2013-0190 xen corruption with 32bit pvops (rhbz 896051 896038)
>
>* Wed Jan 16 2013 Josh Boyer <jwboyer@redhat.com>
>- Add patch from Stanislaw Gruszka to fix iwlegacy IBSS cleanup (rhbz 886946)
>
>* Tue Jan 15 2013 Justin M. Forbes <jforbes@redhat.com> 3.7.2-203
>- Turn off Intel IOMMU by default
>- Stable queue from 3.7.3 with many relevant fixes
>
>* Tue Jan 15 2013 Josh Boyer <jwboyer@redhat.com>
>- Enable CONFIG_DVB_USB_V2 (rhbz 895460)
>
>* Mon Jan 14 2013 Josh Boyer <jwboyer@redhat.com>
>- Enable Orinoco drivers in kernel-modules-extra (rhbz 894069)
>
>* Fri Jan 11 2013 Justin M. Forbes <jforbes@redhat.com> 3.7.1-1
>- Linux v3.7.2
>- Enable Intel IOMMU by default
>
>* Thu Jan 10 2013 Dave Jones <davej@redhat.com>
>- Add audit-libs-devel to perf build-deps to enable trace command. (rhbz 892893)
>
>* Tue Jan 08 2013 Josh Boyer <jwboyer@redhat.com>
>- Add patch to fix shutdown on some machines (rhbz 890547)
>
>* Mon Jan 07 2013 Josh Boyer <jwboyer@redhat.com>
>- Patch to fix efivarfs underflow from Lingzhu Xiang (rhbz 888163)
>
>* Sun Jan 06 2013 Josh Boyer <jwboyer@redhat.com>
>- Fix version.h include due to UAPI change in 3.7 (rhbz 892373)
>
>* Fri Jan 04 2013 Josh Boyer <jwboyer@redhat.com>
>- Fix oops on aoe module removal (rhbz 853064)
>
>* Thu Jan 03 2013 Josh Boyer <jwboyer@redhat.com> - 3.7.1-2
>- Fixup secure boot patchset for 3.7 rebase
>- Package bash completion script for perf
>
>* Thu Jan 03 2013 Dave Jones <davej@redhat.com>
>- Rebase to 3.7.1
>
>* Wed Jan 02 2013 Josh Boyer <jwboyer@redhat.com>
>- Fix autofs issue in 3.6 (rhbz 874372)
>- BR the hostname package (rhbz 886113)
>
>* Mon Dec 17 2012 Josh Boyer <jwboyer@redhat.com> - 3.6.11-3
>- Linux v3.6.11
>
>* Mon Dec 17 2012 Dennis Gilmore <dennis@ausil.us>
>- disable gpiolib on vexpress
>
>* Mon Dec 17 2012 Josh Boyer <jwboyer@redhat.com>
>- Fix oops in sony-laptop setup (rhbz 873107)
>
>* Wed Dec 12 2012 Josh Boyer <jwboyer@redhat.com> - 3.6.10-5
>- Fix infinite loop in efi signature parser
>- Don't error out if db doesn't exist
>
>* Tue Dec 11 2012 Josh Boyer <jwboyer@redhat.com> - 3.6.10-4
>- Update secure boot patches to include MoK support
>- Fix IBSS scanning in mac80211 (rhbz 883414)
>
>* Tue Dec 11 2012 Justin M. Forbes <jforbes@redhat.com> 3.6.10-1
>- Linux 3.6.10
>
>* Wed Dec 05 2012 Dave Jones <davej@redhat.com>
>- Team driver updates (Jiri Pirko)
>
>* Mon Dec 03 2012 Josh Boyer <jwboyer@redhat.com> - 3.6.9-2
>- Backport 3 upstream fixes to resolve radeon schedule IB errors (rhbz 855275)
>
>* Mon Dec 03 2012 Justin M. Forbes <jforbes@redhat.com> 3.6.9-1
>- Linux 3.6.9
>
>* Thu Nov 29 2012 Peter Robinson <pbrobinson@fedoraproject.org>
>- Update some ARM GPIO and I2C configs
>
>* Tue Nov 27 2012 Josh Boyer <jwboyer@redhat.com>
>- Update patches for 8139cp issues from David Woodhouse (rhbz 851278)
>
>* Mon Nov 26 2012 Josh Boyer <jwboyer@redhat.com> - 3.6.8-1
>- Linux v3.6.8
>
>* Mon Nov 26 2012 Josh Boyer <jwboyer@redhat.com>
>- Fix regression in 8139cp driver, debugged by William J. Eaton (rhbz 851278)
>- Fix ACPI video after _DOD errors (rhbz 869383)
>- Fix ata command timeout oops in mvsas (rhbz 869629)
>- Enable CONFIG_UIO_PDRV on ppc64 (rhbz 878180)
>- CVE-2012-4530: stack disclosure binfmt_script load_script (rhbz 868285 880147)
>
>* Tue Nov 20 2012 Josh Boyer <jwboyer@redhat.com> - 3.6.7-5
>- CVE-2012-4461: kvm: invalid opcode oops on SET_SREGS with OSXSAVE bit set (rhbz 878518 862900)
>- Add VC_MUTE ioctl (rhbz 859485)
>- Add support for BCM20702A0 (rhbz 874791)
>
>* Tue Nov 20 2012 Peter Robinson <pbrobinson@fedoraproject.org>
>- Change the minimum mmap address back to 32768 on ARM systems (thanks to Jon Masters)
>
>* Mon Nov 19 2012 Josh Boyer <jwboyer@redhat.com>
>- Apply patches from Jeff Moyer to fix direct-io oops (rhbz 812129)
>
>* Sat Nov 17 2012 Justin M. Forbes <jforbes@linuxtx.org> - 3.6.7-1
>- linux 3.6.7
>
>* Fri Nov 16 2012 Josh Boyer <jwboyer@redhat.com> - 3.6.6-9
>- Fix oops causing typo in keyspan driver (rhbz 870562)
>- Don't WARN_ON empty queues in iwlwifi (rhbz 873001)
>
>* Thu Nov 15 2012 Justin M. Forbes <jforbes@redhat.com>
>- Fix panic in  panic in smp_irq_move_cleanup_interrupt (rhbz 869341)
>
>* Wed Nov 14 2012 Josh Boyer <jwboyer@redhat.com>
>- Fix module signing of kernel flavours
>
>* Mon Nov 12 2012 Justin M. Forbes <jforbes@redhat.com>
>- fix list_del corruption warning on USB audio with twinkle (rhbz 871078)
>
>* Fri Nov 09 2012 Josh Boyer <jwboyer@redhat.com>
>- Fix vanilla kernel builds (reported by Thorsten Leemhuis)
>
>* Wed Nov 07 2012 Josh Boyer <jwboyer@redhat.com>
>- Add patch to not break modules_install for external module builds
>
>* Mon Nov 05 2012 Josh Boyer <jwboyer@redhat.com> - 3.6.6-3
>- Backport efivarfs from efi/next for moktools
>- Fix build break without CONFIG_EFI set (reported by Peter W. Bowey)
>- Linux v3.6.6
>
>* Mon Nov 05 2012 David Woodhouse <David.Woodhouse@intel.com> - 3.6.5-3
>- Fix EFI framebuffer handling
>
>* Wed Oct 31 2012 Josh Boyer <jwboyer@redhat.com> - 3.6.5-2
>- Update modsign to what is currently in 3.7-rc2
>- Update secure boot support for UEFI cert importing.
>
>* Wed Oct 31 2012 Josh Boyer <jwboyer@redhat.com> - 3.6.5-1
>- Linux v3.6.5
>- CVE-2012-4565 net: divide by zero in tcp algorithm illinois (rhbz 871848 871923)
>
>* Tue Oct 30 2012 Josh Boyer <jwboyer@redhat.com>
>- Move power-x86-destdir.patch to apply on vanilla kernels (thanks knurd)
>
>* Mon Oct 29 2012 Justin M. Forbes <jforbes@redhat.com>
>- Uprobes backports from upstream
>
>* Mon Oct 29 2012 Peter Robinson <pbrobinson@fedoraproject.org>
>- Update ARM alignment patch to upstream
>
>* Mon Oct 29 2012 Justin M. Forbes <jforbes@redhat.com> 3.6.4-1
>- Linux 3.6.4
>
>* Thu Oct 25 2012 Justin M. Forbes <jforbes@redhat.com>
>- CVE-2012-4508: ext4: AIO vs fallocate stale data exposure (rhbz 869904 869909)
>
>* Wed Oct 24 2012 Josh Boyer <jwboyer@redhat.com>
>- Remove patch added for rhbz 856863
>- Add patch to fix corrupted text with i915 (rhbz 852210)
>
>* Tue Oct 23 2012 Peter Robinson <pbrobinson@fedoraproject.org>
>- Update OMAP Video config options
>
>* Mon Oct 22 2012 Peter Robinson <pbrobinson@fedoraproject.org>
>- VIFO fails on ARM at the moment so disable it for the time being
>
>* Mon Oct 22 2012 Josh Boyer <jwboyer@redhat.com>
>- Add patch to fix CIFS oops from Jeff Layton (rhbz 867344)
>- CVE-2012-0957: uts: stack memory leak in UNAME26 (rhbz 862877 864824)
>- Fix rt2x00 usb reset resume (rhbz 856863)
>
>* Mon Oct 22 2012 Justin M. Forbes <jforbes@linuxtx.org> - 3.6.3-1
>- Linux 3.6.3
>
>* Mon Oct 22 2012 Peter Robinson <pbrobinson@fedoraproject.org>
>- Revert ARM misaligned access check to stop kernel OOPS
>- Actually apply highbank sata patch
>
>* Thu Oct 18 2012 Josh Boyer <jwboyer@redhat.com>
>- Patch to have mac80211 connect with HT20 if HT40 is not allowed (rhbz 866013)
>- Enable VFIO (rhbz 867152)
>- Apply patch from Stanislaw Gruszka to fix mac80211 issue (rhbz 862168)
>- Apply patch to fix iwlwifi crash (rhbz 770484)
>
>* Tue Oct 16 2012 Mauro Carvalho Chehab <mchehab@redhat.com> - 3.6.2-2
>- Fix i82975x_edac OOPS
>
>* Tue Oct 16 2012 Justin M. Forbes <jforbes@redhat.com>
>- Enable CONFIG_TCM_VHOST (rhbz 866981)
>
>* Mon Oct 15 2012 Justin M. Forbes <jforbes@redhat.com> 3.6.2-1
>- Linux 3.6.2
>
>* Thu Oct 11 2012 Peter Robinson <pbrobinson@fedoraproject.org> 3.6.1-2
>- Update ARM config for missing newoption items
>
>* Tue Oct 09 2012 Josh Boyer <jwboyer@redhat.com>
>- Drop unhandled irq polling patch
>
>* Mon Oct 08 2012 Justin M. Forbes <jforbes@redhat.com> 3.6.1-1
>- Linux 3.6.1
>
>* Sat Oct 06 2012 Josh Boyer <jwboyer@redhat.com>
>- secure boot modsign depends on CONFIG_MODULE_SIG not CONFIG_MODULES
>
>* Fri Oct 05 2012 Josh Boyer <jwboyer@redhat.com>
>- Adjust secure boot modsign patch
>
>* Fri Oct  5 2012 Peter Robinson <pbrobinson@fedoraproject.org>
>- Build MMC in on OMAP and Tegra until we work out why modules don't work
>
>* Wed Oct 03 2012 Adam Jackson <ajax@redhat.com>
>- Drop vgem patches, not doing anything yet.
>
>* Wed Oct 03 2012 Josh Boyer <jwboyer@redhat.com>
>- Make sure kernel-tools-libs-devel provides kernel-tools-devel
>
>* Tue Oct 02 2012 Justin M. Forbes <jforbes@redhat.com> - 3.6.0-2
>- Power: Fix VMX fix for memcpy case (rhbz 862420)
>
>* Tue Oct 02 2012 Josh Boyer <jwboyer@redhat.com>
>- Patch from David Howells to fix overflow on 32-bit X.509 certs (rhbz 861322)
>
>* Tue Oct  2 2012 Peter Robinson <pbrobinson@fedoraproject.org>
>- Update ARM configs for 3.6 final
>- Add highbank SATA driver for stability
>- Build in OMAP MMC and DMA drivers to fix borkage for now
>
>* Mon Oct 01 2012 Justin M. Forbes <jforbes@redhat.com> - 3.6.0-1
>- Linux 3.6.0
>- Disable debugging options.
>
>###
># The following Emacs magic makes C-c C-e use UTC dates.
># Local Variables:
># rpm-change-log-uses-utc: t
># End:
>###

Actions: View

Attachments on bug 879823: 659798 | 695697 | 751616 | 754277 | 763881 | 765278 | 765280 | 771341 | 774483 | 780915 | 781172 | 784787