Attachment 696384 Details for Bug 907801 – dmesg from bad kernel 3.7.6-201

dmesg from bad kernel 3.7.6-201

dmesgbadkernel.txt (text/plain), 34.09 KB, created by Gaston Verhulst on 2013-02-12 08:05:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gaston Verhulst

Created: 2013-02-12 08:05:33 UTC

Size: 34.09 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 3.7.6-201.fc18.i686.PAE (mockbuild@bkernel02) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP Mon Feb 4 16:05:44 UTC 2013
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fff7fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000003fff8000-0x000000003fffffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
>[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
>[    0.000000] Legacy DMI 0.0 present.
>[    0.000000] DMI:  , BIOS  
>[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-C7FFF write-protect
>[    0.000000]   C8000-EFFFF uncachable
>[    0.000000]   F0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask FC0000000 write-back
>[    0.000000]   1 disabled
>[    0.000000]   2 disabled
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 base 0E0000000 mask FF8000000 write-combining
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] found SMP MP-table at [mem 0x000fb930-0x000fb93f] mapped at [c00fb930]
>[    0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
>[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x375fdfff]
>[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x373fffff] page 2M
>[    0.000000]  [mem 0x37400000-0x375fdfff] page 4k
>[    0.000000] kernel direct mapping tables up to 0x375fdfff @ [mem 0x013f7000-0x013fffff]
>[    0.000000] RAMDISK: [mem 0x35b80000-0x36db7fff]
>[    0.000000] ACPI: RSDP 000fa940 00014 (v00 AMI   )
>[    0.000000] ACPI: RSDT 3fff0000 0002C (v01 AMIINT VIA_K7   00000010 MSFT 00000097)
>[    0.000000] ACPI: FACP 3fff0030 00081 (v01 AMIINT VIA_K7   00000011 MSFT 00000097)
>[    0.000000] ACPI: DSDT 3fff0120 032BF (v01    VIA   VIA_K7 00001000 MSFT 0100000D)
>[    0.000000] ACPI: FACS 3fff8000 00040
>[    0.000000] ACPI: APIC 3fff00c0 00054 (v01 AMIINT VIA_K7   00000009 MSFT 00000097)
>[    0.000000] ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
>[    0.000000] ACPI: Disabling ACPI support
>[    0.000000] 137MB HIGHMEM available.
>[    0.000000] 885MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 375fe000
>[    0.000000]   low ram: 0 - 375fe000
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
>[    0.000000]   Normal   [mem 0x01000000-0x375fdfff]
>[    0.000000]   HighMem  [mem 0x375fe000-0x3ffeffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0x3ffeffff]
>[    0.000000] On node 0 totalpages: 262015
>[    0.000000] free_area_init_node: node 0, pgdat c0c24740, node_mem_map f6dfd200
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1740 pages used for memmap
>[    0.000000]   Normal zone: 220978 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 276 pages used for memmap
>[    0.000000]   HighMem zone: 35038 pages, LIFO batch:7
>[    0.000000] Using APIC driver default
>[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
>[    0.000000] Intel MultiProcessor Specification v1.4
>[    0.000000]     Virtual Wire compatibility mode.
>[    0.000000] MPTABLE: OEM ID: VIA     
>[    0.000000] MPTABLE: Product ID: VT5440B     
>[    0.000000] MPTABLE: APIC at: 0xFEE00000
>[    0.000000] Processor #0 (Bootup-CPU)
>[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>[    0.000000] Processors: 1
>[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>[    0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 14 pages/cpu @f6de8000 s34944 r0 d22400 u57344
>[    0.000000] pcpu-alloc: s34944 r0 d22400 u57344 alloc=14*4096
>[    0.000000] pcpu-alloc: [0] 0 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.7.6-201.fc18.i686.PAE root=/dev/mapper/vg_gastonv-lv_root ro rd.md=0 rd.dm=0 rd.lvm.lv=vg_gastonv/lv_root SYSFONT=True KEYTABLE=be-latin1 rd.lvm.lv=vg_gastonv/lv_swap rd.luks=0 LANG=nl_NL.UTF-8 rhgb quiet
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] __ex_table already sorted, skipping sort
>[    0.000000] Initializing CPU#0
>[    0.000000] allocated 2096896 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] Initializing HighMem for node 0 (000375fe:0003fff0)
>[    0.000000] Memory: 1008112k/1048512k available (5679k kernel code, 39948k reserved, 2744k data, 672k init, 141256k highmem)
>[    0.000000] virtual kernel memory layout:
>    fixmap  : 0xffa96000 - 0xfffff000   (5540 kB)
>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
>      .init : 0xc0c3b000 - 0xc0ce3000   ( 672 kB)
>      .data : 0xc098be7b - 0xc0c3a080   (2744 kB)
>      .text : 0xc0400000 - 0xc098be7b   (5679 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
>[    0.000000] NR_IRQS:2304 nr_irqs:256 16
>[    0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1349.925 MHz processor
>[    0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2699.85 BogoMIPS (lpj=1349925)
>[    0.001012] pid_max: default: 32768 minimum: 301
>[    0.002099] Security Framework initialized
>[    0.002124] SELinux:  Initializing.
>[    0.002148] SELinux:  Starting in permissive mode
>[    0.002279] Mount-cache hash table entries: 512
>[    0.002811] Initializing cgroup subsys cpuacct
>[    0.002818] Initializing cgroup subsys memory
>[    0.002839] Initializing cgroup subsys devices
>[    0.002844] Initializing cgroup subsys freezer
>[    0.002848] Initializing cgroup subsys net_cls
>[    0.002852] Initializing cgroup subsys blkio
>[    0.002856] Initializing cgroup subsys perf_event
>[    0.002923] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
>[    0.002932] mce: CPU supports 4 MCE banks
>[    0.002973] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
>Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
>tlb_flushall_shift: -1
>[    0.012875] Freeing SMP alternatives: 24k freed
>[    0.014769] ftrace: allocating 23261 entries in 46 pages
>[    0.027202] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.027482] ExtINT not setup in hardware but reported by MP table
>[    0.029000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.039106] smpboot: CPU0: AMD Athlon(tm) XP 1500+ (fam: 06, model: 08, stepping: 01)
>[    0.141024] Performance Events: AMD PMU driver.
>[    0.141035] ... version:                0
>[    0.141037] ... bit width:              48
>[    0.141040] ... generic registers:      4
>[    0.141042] ... value mask:             0000ffffffffffff
>[    0.141045] ... max period:             00007fffffffffff
>[    0.141048] ... fixed-purpose events:   0
>[    0.141050] ... event mask:             000000000000000f
>[    0.144411] Brought up 1 CPUs
>[    0.144422] smpboot: Total of 1 processors activated (2699.85 BogoMIPS)
>[    0.145231] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.145612] devtmpfs: initialized
>[    0.146356] PM: Registering ACPI NVS region [mem 0x3fff8000-0x3fffffff] (32768 bytes)
>[    0.148685] atomic64 test passed for i586+ platform with CX8 and with SSE
>[    0.148748] RTC time:  8:18:16, date: 02/12/13
>[    0.148885] NET: Registered protocol family 16
>[    0.154281] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>[    0.154285] PCI: Using configuration type 1 for base access
>[    0.156973] bio: create slab <bio-0> at 0
>[    0.157139] ACPI: Interpreter disabled.
>[    0.157300] vgaarb: loaded
>[    0.157502] SCSI subsystem initialized
>[    0.157591] libata version 3.00 loaded.
>[    0.157697] usbcore: registered new interface driver usbfs
>[    0.157719] usbcore: registered new interface driver hub
>[    0.157777] usbcore: registered new device driver usb
>[    0.157936] PCI: Probing PCI hardware
>[    0.157942] PCI: root bus 00: using default resources
>[    0.157957] PCI: Probing PCI hardware (bus 00)
>[    0.158023] PCI host bridge to bus 0000:00
>[    0.158035] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>[    0.158041] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3ffffffff]
>[    0.158046] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
>[    0.158079] pci 0000:00:00.0: [1106:3189] type 00 class 0x060000
>[    0.158099] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
>[    0.158193] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
>[    0.158248] pci 0000:00:01.0: supports D1
>[    0.158279] pci 0000:00:07.0: [1131:7134] type 00 class 0x048000
>[    0.158300] pci 0000:00:07.0: reg 10: [mem 0xdffffc00-0xdfffffff]
>[    0.158375] pci 0000:00:07.0: supports D1 D2
>[    0.158403] pci 0000:00:0a.0: [1274:5880] type 00 class 0x040100
>[    0.158422] pci 0000:00:0a.0: reg 10: [io  0xec00-0xec3f]
>[    0.158499] pci 0000:00:0a.0: supports D1 D2
>[    0.158529] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
>[    0.158579] pci 0000:00:10.0: reg 20: [io  0xe000-0xe01f]
>[    0.158623] pci 0000:00:10.0: supports D1 D2
>[    0.158628] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.158662] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
>[    0.158711] pci 0000:00:10.1: reg 20: [io  0xe400-0xe41f]
>[    0.158756] pci 0000:00:10.1: supports D1 D2
>[    0.158760] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.158787] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
>[    0.158836] pci 0000:00:10.2: reg 20: [io  0xe800-0xe81f]
>[    0.158881] pci 0000:00:10.2: supports D1 D2
>[    0.158885] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.158913] pci 0000:00:10.3: [1106:3104] type 00 class 0x0c0320
>[    0.158932] pci 0000:00:10.3: reg 10: [mem 0xdffffb00-0xdffffbff]
>[    0.159021] pci 0000:00:10.3: supports D1 D2
>[    0.159026] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.159059] pci 0000:00:11.0: [1106:3177] type 00 class 0x060100
>[    0.159126] HPET not enabled in BIOS. You might try hpet=force boot option
>[    0.159139] pci 0000:00:11.0: quirk: [io  0x0800-0x087f] claimed by vt8235 PM
>[    0.159146] pci 0000:00:11.0: quirk: [io  0x0400-0x040f] claimed by vt8235 SMB
>[    0.159195] pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a
>[    0.159247] pci 0000:00:11.1: reg 20: [io  0xfc00-0xfc0f]
>[    0.159321] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
>[    0.159341] pci 0000:00:11.5: reg 10: [io  0xdc00-0xdcff]
>[    0.159419] pci 0000:00:11.5: supports D1 D2
>[    0.159447] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
>[    0.159467] pci 0000:00:12.0: reg 10: [io  0xd800-0xd8ff]
>[    0.159480] pci 0000:00:12.0: reg 14: [mem 0xdffffa00-0xdffffaff]
>[    0.159549] pci 0000:00:12.0: supports D1 D2
>[    0.159553] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.159628] pci 0000:01:00.0: [10de:0326] type 00 class 0x030000
>[    0.159648] pci 0000:01:00.0: reg 10: [mem 0xde000000-0xdeffffff]
>[    0.159660] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff pref]
>[    0.159695] pci 0000:01:00.0: reg 30: [mem 0xdfee0000-0xdfefffff pref]
>[    0.159765] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.159775] pci 0000:00:01.0:   bridge window [mem 0xdde00000-0xdfefffff]
>[    0.159782] pci 0000:00:01.0:   bridge window [mem 0xbdd00000-0xddcfffff pref]
>[    0.159796] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
>[    0.160371] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.160495] pci 0000:00:11.0: VIA IRQ router [1106:3177]
>[    0.160504] PCI: pci_cache_line_size set to 32 bytes
>[    0.160559] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>[    0.160565] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
>[    0.160817] NetLabel: Initializing
>[    0.160821] NetLabel:  domain hash size = 128
>[    0.160823] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.160851] NetLabel:  unlabeled traffic allowed by default
>[    0.161098] Switching to clocksource refined-jiffies
>[    0.178097] pnp: PnP ACPI: disabled
>[    0.182128] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.182145] pci 0000:00:01.0:   bridge window [mem 0xdde00000-0xdfefffff]
>[    0.182153] pci 0000:00:01.0:   bridge window [mem 0xbdd00000-0xddcfffff pref]
>[    0.182176] pci 0000:00:01.0: setting latency timer to 64
>[    0.182185] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>[    0.182190] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3ffffffff]
>[    0.182196] pci_bus 0000:01: resource 1 [mem 0xdde00000-0xdfefffff]
>[    0.182201] pci_bus 0000:01: resource 2 [mem 0xbdd00000-0xddcfffff pref]
>[    0.182340] NET: Registered protocol family 2
>[    0.182705] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.185405] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.186759] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.186931] TCP: reno registered
>[    0.186941] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.186982] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.187237] NET: Registered protocol family 1
>[    0.187275] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
>[    0.187322] pci 0000:00:10.0: PCI->APIC IRQ transform: INT A -> IRQ 21
>[    0.187357] pci 0000:00:10.1: PCI->APIC IRQ transform: INT B -> IRQ 21
>[    0.187386] pci 0000:00:10.2: PCI->APIC IRQ transform: INT C -> IRQ 21
>[    0.187413] pci 0000:00:10.3: PCI->APIC IRQ transform: INT D -> IRQ 21
>[    0.187511] pci 0000:01:00.0: Boot video device
>[    0.187516] PCI: CLS 32 bytes, default 32
>[    0.187663] Unpacking initramfs...
>[    1.040516] Freeing initrd memory: 18656k freed
>[    1.080714] platform rtc_cmos: registered platform RTC device (no PNP device found)
>[    1.081034] apm: BIOS not found.
>[    1.081544] Initialise module verification
>[    1.081659] audit: initializing netlink socket (disabled)
>[    1.081691] type=2000 audit(1360657096.080:1): initialized
>[    1.117135] bounce pool size: 64 pages
>[    1.117161] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.120299] VFS: Disk quotas dquot_6.5.2
>[    1.120412] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    1.121496] msgmni has been set to 1729
>[    1.121664] SELinux:  Registering netfilter hooks
>[    1.122844] alg: No test for stdrng (krng)
>[    1.122884] NET: Registered protocol family 38
>[    1.122892] Key type asymmetric registered
>[    1.122897] Asymmetric key parser 'x509' registered
>[    1.123031] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    1.123099] io scheduler noop registered
>[    1.123104] io scheduler deadline registered
>[    1.123124] io scheduler cfq registered (default)
>[    1.123427] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.123472] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    1.123475] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    1.123652] vesafb: mode is 1024x768x32, linelength=4096, pages=0
>[    1.123656] vesafb: scrolling: redraw
>[    1.123661] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    1.124003] vesafb: framebuffer at 0xc0000000, mapped to 0xf7e80000, using 3072k, total 3072k
>[    1.124254] Console: switching to colour frame buffer device 128x48
>[    1.235165] fb0: VESA VGA frame buffer device
>[    1.235455] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.235889] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.236847] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>[    1.238464] Non-volatile memory driver v1.3
>[    1.238470] Linux agpgart interface v0.103
>[    1.238684] agpgart: Detected VIA KT400/KT400A/KT600 chipset
>[    1.249586] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
>[    1.251243] loop: module loaded
>[    1.251563] libphy: Fixed MDIO Bus: probed
>[    1.251674] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.251715] ehci_hcd 0000:00:10.3: PCI->APIC IRQ transform: INT D -> IRQ 21
>[    1.251760] ehci_hcd 0000:00:10.3: EHCI Host Controller
>[    1.251849] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
>[    1.251967] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdffffb00
>[    1.257847] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
>[    1.257921] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.257927] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.257932] usb usb1: Product: EHCI Host Controller
>[    1.257937] usb usb1: Manufacturer: Linux 3.7.6-201.fc18.i686.PAE ehci_hcd
>[    1.257941] usb usb1: SerialNumber: 0000:00:10.3
>[    1.258166] hub 1-0:1.0: USB hub found
>[    1.258179] hub 1-0:1.0: 6 ports detected
>[    1.258430] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.258457] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.258515] uhci_hcd 0000:00:10.0: PCI->APIC IRQ transform: INT A -> IRQ 21
>[    1.258536] uhci_hcd 0000:00:10.0: UHCI Host Controller
>[    1.258628] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>[    1.258664] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
>[    1.258747] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.258753] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.258758] usb usb2: Product: UHCI Host Controller
>[    1.258762] usb usb2: Manufacturer: Linux 3.7.6-201.fc18.i686.PAE uhci_hcd
>[    1.258766] usb usb2: SerialNumber: 0000:00:10.0
>[    1.258958] hub 2-0:1.0: USB hub found
>[    1.258969] hub 2-0:1.0: 2 ports detected
>[    1.259095] uhci_hcd 0000:00:10.1: PCI->APIC IRQ transform: INT B -> IRQ 21
>[    1.259110] uhci_hcd 0000:00:10.1: UHCI Host Controller
>[    1.259208] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>[    1.259237] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400
>[    1.259308] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.259314] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.259318] usb usb3: Product: UHCI Host Controller
>[    1.259323] usb usb3: Manufacturer: Linux 3.7.6-201.fc18.i686.PAE uhci_hcd
>[    1.259327] usb usb3: SerialNumber: 0000:00:10.1
>[    1.259499] hub 3-0:1.0: USB hub found
>[    1.259509] hub 3-0:1.0: 2 ports detected
>[    1.259642] uhci_hcd 0000:00:10.2: PCI->APIC IRQ transform: INT C -> IRQ 21
>[    1.259656] uhci_hcd 0000:00:10.2: UHCI Host Controller
>[    1.259744] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>[    1.259773] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
>[    1.259864] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.259870] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.259874] usb usb4: Product: UHCI Host Controller
>[    1.259879] usb usb4: Manufacturer: Linux 3.7.6-201.fc18.i686.PAE uhci_hcd
>[    1.259883] usb usb4: SerialNumber: 0000:00:10.2
>[    1.260087] hub 4-0:1.0: USB hub found
>[    1.260097] hub 4-0:1.0: 2 ports detected
>[    1.260366] usbcore: registered new interface driver usbserial
>[    1.260386] usbcore: registered new interface driver usbserial_generic
>[    1.260405] usbserial: USB Serial support registered for generic
>[    1.260464] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    1.509921] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.510101] mousedev: PS/2 mouse device common for all mice
>[    1.510552] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
>[    1.510608] rtc0: alarms up to one day, 114 bytes nvram
>[    1.510791] device-mapper: uevent: version 1.0.3
>[    1.510963] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
>[    1.511059] cpuidle: using governor ladder
>[    1.511063] cpuidle: using governor menu
>[    1.511272] EFI Variables Facility v0.08 2004-May-17
>[    1.511639] usbcore: registered new interface driver usbhid
>[    1.511643] usbhid: USB HID core driver
>[    1.511741] drop_monitor: Initializing network drop monitor service
>[    1.511974] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.512061] TCP: cubic registered
>[    1.512066] Initializing XFRM netlink socket
>[    1.512324] NET: Registered protocol family 10
>[    1.512704] mip6: Mobile IPv6
>[    1.512710] NET: Registered protocol family 17
>[    1.513167] Using IPI No-Shortcut mode
>[    1.513383] PM: Hibernation image not present or could not be loaded.
>[    1.513387] Loading module verification certificates
>[    1.522310] MODSIGN: Loaded cert 'Fedora kernel signing key: a4758618315ec12ec35cca31ddbe2cac6a1f7990'
>[    1.522358] registered taskstats version 1
>[    1.522713]   Magic number: 1:992:320
>[    1.522789] tty tty45: hash matches
>[    1.522886] rtc_cmos rtc_cmos: setting system clock to 2013-02-12 08:18:17 UTC (1360657097)
>[    1.523155] Freeing unused kernel memory: 672k freed
>[    1.524705] Write protecting the kernel text: 5680k
>[    1.524855] Write protecting the kernel read-only data: 2216k
>[    1.536362] systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    1.536566] systemd[1]: Running in initial RAM disk.
>[    1.536932] systemd[1]: No hostname configured.
>[    1.536948] systemd[1]: Set hostname to <localhost>.
>[    1.537172] systemd[1]: Initializing machine ID from random generator.
>[    1.542185] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.559865] usb 1-1: new high-speed USB device number 2 using ehci_hcd
>[    1.563773] systemd[1]: Starting Encrypted Volumes.
>[    1.563899] systemd[1]: Reached target Encrypted Volumes.
>[    1.564149] systemd[1]: Starting udev Kernel Socket.
>[    1.564294] systemd[1]: Listening on udev Kernel Socket.
>[    1.564430] systemd[1]: Starting udev Control Socket.
>[    1.564574] systemd[1]: Listening on udev Control Socket.
>[    1.564610] systemd[1]: Starting Journal Socket.
>[    1.564749] systemd[1]: Listening on Journal Socket.
>[    1.565369] systemd[1]: Started Load Kernel Modules.
>[    1.565406] systemd[1]: Starting Journal Service...
>[    1.571336] systemd[1]: Started Journal Service.
>[    1.574109] systemd[1]: Starting Sockets.
>[    1.574174] systemd[1]: Reached target Sockets.
>[    1.574234] systemd[1]: Starting dracut cmdline hook...
>[    1.576971] systemd[1]: Starting Swap.
>[    1.577031] systemd[1]: Reached target Swap.
>[    1.577067] systemd[1]: Starting Local File Systems.
>[    1.577097] systemd[1]: Reached target Local File Systems.
>[    1.677892] usb 1-1: New USB device found, idVendor=04b8, idProduct=0007
>[    1.677904] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.677910] usb 1-1: Product: USB2.0 Printer (Hi-speed)
>[    1.677914] usb 1-1: Manufacturer: EPSON
>[    1.677918] usb 1-1: SerialNumber: 423035303246DE4593
>[    1.934788] usb 3-2: new low-speed USB device number 2 using uhci_hcd
>[    2.010846] systemd-udevd[107]: starting version 197
>[    2.081765] Switching to clocksource tsc
>[    2.098151] usb 3-2: New USB device found, idVendor=046d, idProduct=c050
>[    2.098164] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.098171] usb 3-2: Product: USB-PS/2 Optical Mouse
>[    2.098176] usb 3-2: Manufacturer: Logitech
>[    2.116343] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input1
>[    2.116663] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2/input0
>[    2.569763] pata_via 0000:00:11.1: version 0.3.4
>[    2.569809] pata_via 0000:00:11.1: PCI->APIC IRQ transform: INT A -> IRQ 22
>[    2.585259] scsi0 : pata_via
>[    2.588855] scsi1 : pata_via
>[    2.589010] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>[    2.589016] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>[    2.627286] [drm] Initialized drm 1.1.0 20060810
>[    2.745926] ata1.00: ATA-4: ST310232A, 3.09, max UDMA/33
>[    2.745938] ata1.00: 20005650 sectors, multi 16: LBA 
>[    2.746839] ata1.01: HPA detected: current 66055248, native 78165360
>[    2.746847] ata1.01: ATA-5: WDC WD400BB-00DEA0, 05.03E05, max UDMA/100
>[    2.746852] ata1.01: 66055248 sectors, multi 16: LBA 
>[    2.752769] ata1.00: configured for UDMA/33
>[    2.759635] ata1.01: configured for UDMA/100
>[    2.759940] scsi 0:0:0:0: Direct-Access     ATA      ST310232A        3.09 PQ: 0 ANSI: 5
>[    2.760486] sd 0:0:0:0: [sda] 20005650 512-byte logical blocks: (10.2 GB/9.53 GiB)
>[    2.760639] sd 0:0:0:0: [sda] Write Protect is off
>[    2.760646] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.760695] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.761281] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.776646] scsi 0:0:1:0: Direct-Access     ATA      WDC WD400BB-00DE 05.0 PQ: 0 ANSI: 5
>[    2.777163]  sda: sda1 sda2 sda3
>[    2.777443] sd 0:0:1:0: [sdb] 66055248 512-byte logical blocks: (33.8 GB/31.4 GiB)
>[    2.777756] sd 0:0:1:0: [sdb] Write Protect is off
>[    2.777763] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.778090] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.778230] sd 0:0:1:0: Attached scsi generic sg1 type 0
>[    2.792863]  sdb: sdb1 sdb2
>[    2.793095] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.793713] sd 0:0:1:0: [sdb] Attached SCSI disk
>[    2.937802] ata2.00: ATA-7: Maxtor 6L080P0, BAH41G10, max UDMA/133
>[    2.937815] ata2.00: 160086528 sectors, multi 16: LBA48 
>[    2.937827] ata2.01: ATAPI: TSSTcorp CDDVDW SH-S222L, SB03, max UDMA/66
>[    2.937837] ata2.00: limited to UDMA/33 due to 40-wire cable
>[    2.937842] ata2.01: limited to UDMA/33 due to 40-wire cable
>[    2.945281] ata2.00: configured for UDMA/33
>[    2.950745] ata2.01: configured for UDMA/33
>[    2.951345] scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6L080P0   BAH4 PQ: 0 ANSI: 5
>[    2.951807] sd 1:0:0:0: [sdc] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
>[    2.951917] sd 1:0:0:0: [sdc] Write Protect is off
>[    2.951924] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    2.951972] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.952558] sd 1:0:0:0: Attached scsi generic sg2 type 0
>[    2.983945]  sdc: sdc1
>[    2.984857] scsi 1:0:1:0: CD-ROM            TSSTcorp CDDVDW SH-S222L  SB03 PQ: 0 ANSI: 5
>[    2.989279] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    2.989293] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    2.989635] sd 1:0:0:0: [sdc] Attached SCSI disk
>[    2.989774] sr 1:0:1:0: Attached scsi CD-ROM sr0
>[    2.990032] sr 1:0:1:0: Attached scsi generic sg3 type 5
>[    4.459084] bio: create slab <bio-1> at 1
>[    4.811247] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    5.185686] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    5.575478] systemd-journald[44]: Received SIGTERM
>[    7.255474] SELinux:  Disabled at runtime.
>[    7.255514] SELinux:  Unregistering netfilter hooks
>[    7.255629] type=1404 audit(1360657103.231:2): selinux=0 auid=4294967295 ses=4294967295
>[    7.313422] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
>[   10.722621] systemd-udevd[318]: starting version 197
>[   10.823804] EXT4-fs (dm-1): re-mounted. Opts: (null)
>[   11.858933] systemd-modules-load[323]: Inserted module 'uinput'
>[   14.447479] microcode: AMD CPU family 0x6 not supported
>[   15.791850] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
>[   15.791941] via-rhine 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 23
>[   15.798062] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0xdffffa00, 00:0c:76:93:f9:27, IRQ 23
>[   15.798839] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
>[   16.017678] NET: Registered protocol family 23
>[   16.248164] media: Linux media interface: v0.10
>[   16.664883] systemd-udevd[357]: renamed network interface eth0 to em1
>[   16.895883] ACPI Exception: AE_BAD_PARAMETER, Thread 4137283856 could not acquire Mutex [0x1] (20120913/utmutex-276)
>[   16.943098] Linux video capture interface: v2.00
>[   17.583590] usblp 1-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0007
>[   17.585224] usbcore: registered new interface driver usblp
>[   19.100686] saa7130/34: v4l2 driver version 0, 2, 17 loaded
>[   19.100808] saa7134 0000:00:07.0: PCI->APIC IRQ transform: INT A -> IRQ 18
>[   19.100819] saa7134[0]: found at 0000:00:07.0, rev: 1, irq: 18, latency: 32, mmio: 0xdffffc00
>[   19.100831] saa7134[0]: subsystem: 11bd:002b, board: Pinnacle PCTV Stereo (saa7134) [card=26,autodetected]
>[   19.100864] saa7134[0]: board init: gpio is 0
>[   19.238239] saa7134[0]: i2c eeprom 00: bd 11 2b 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
>[   19.238264] saa7134[0]: i2c eeprom 10: 00 00 19 0e ff 20 ff ff ff ff ff ff ff ff ff ff
>[   19.238279] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 53 ff ff ff ff
>[   19.238294] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   19.238309] saa7134[0]: i2c eeprom 40: ff 07 00 c0 86 ff 01 03 ff ff ff ff ff ff ff ff
>[   19.238323] saa7134[0]: i2c eeprom 50: 0c 22 17 36 03 02 91 bd ff ff ff ff ff ff ff ff
>[   19.238338] saa7134[0]: i2c eeprom 60: 03 03 19 71 fb ff ff ff ff ff ff ff ff ff ff ff
>[   19.238353] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   19.238367] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   19.238382] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   19.238397] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   19.238411] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   19.238426] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   19.238441] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   19.238455] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   19.238470] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   20.859495] tda9887 1-0043: creating new instance
>[   20.859506] tda9887 1-0043: tda988[5/6/7] found
>[   20.861840] tuner 1-0043: Tuner 74 found with type(s) Radio TV.
>[   20.873097] Adding 2064380k swap on /dev/mapper/vg_gastonv-lv_swap.  Priority:-1 extents:1 across:2064380k 
>[   21.081786] Chip ID is not zero. It is not a TEA5767
>[   21.081817] tuner 1-0060: Tuner -1 found with type(s) Radio TV.
>[   21.169738] mt20xx 1-0060: microtune: companycode=3cbf part=42 rev=22
>[   21.177727] mt20xx 1-0060: microtune MT2050 found, OK
>[   21.200110] saa7134[0]: registered device video0 [v4l2]
>[   21.200264] saa7134[0]: registered device vbi0
>[   21.200460] snd_ens1371 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 17
>[   21.304910] saa7134 ALSA driver for DMA sound loaded
>[   21.304998] saa7134[0]/alsa: saa7134[0] at 0xdffffc00 irq 18 registered as card -1
>[   22.154675] snd_via82xx 0000:00:11.5: PCI->APIC IRQ transform: INT C -> IRQ 22
>[   22.154864] snd_via82xx 0000:00:11.5: setting latency timer to 64
>[   26.225674] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[   28.625374] systemd-journald[319]: Received SIGUSR1
>[   30.345763] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   30.693174] nf_conntrack version 0.5.0 (16054 buckets, 64216 max)
>[   37.016964] Bluetooth: Core ver 2.16
>[   37.017087] NET: Registered protocol family 31
>[   37.017091] Bluetooth: HCI device and connection manager initialized
>[   37.017120] Bluetooth: HCI socket layer initialized
>[   37.017126] Bluetooth: L2CAP socket layer initialized
>[   37.017139] Bluetooth: SCO socket layer initialized
>[   37.088399] RPC: Registered named UNIX socket transport module.
>[   37.088413] RPC: Registered udp transport module.
>[   37.088416] RPC: Registered tcp transport module.
>[   37.088419] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   37.455824] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   37.455835] Bluetooth: BNEP filters: protocol multicast
>[   37.455867] Bluetooth: BNEP socket layer initialized
>[   41.293540] usblp0: removed
>[   41.370995] usblp 1-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0007
>[   60.896647] fuse init (API version 7.20)

Actions: View

Attachments on bug 907801: 693299 | 696384 | 696388 | 696389 | 699364