Attachment 699364 Details for Bug 907801 – dmesg of new kernel-PAE-3.7.8-202.fc18 from 2013-02-19

dmesg of new kernel-PAE-3.7.8-202.fc18 from 2013-02-19

dmesgbad-3.7.8-202.txt (text/plain), 34.89 KB, created by Gaston Verhulst on 2013-02-19 07:56:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gaston Verhulst

Created: 2013-02-19 07:56:32 UTC

Size: 34.89 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 3.7.8-202.fc18.i686.PAE (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP Fri Feb 15 17:47:05 UTC 2013
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fff7fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000003fff8000-0x000000003fffffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
>[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
>[    0.000000] Legacy DMI 0.0 present.
>[    0.000000] DMI:  , BIOS  
>[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-C7FFF write-protect
>[    0.000000]   C8000-EFFFF uncachable
>[    0.000000]   F0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask FC0000000 write-back
>[    0.000000]   1 disabled
>[    0.000000]   2 disabled
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 base 0E0000000 mask FF8000000 write-combining
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] found SMP MP-table at [mem 0x000fb930-0x000fb93f] mapped at [c00fb930]
>[    0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
>[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x375fdfff]
>[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x373fffff] page 2M
>[    0.000000]  [mem 0x37400000-0x375fdfff] page 4k
>[    0.000000] kernel direct mapping tables up to 0x375fdfff @ [mem 0x013f7000-0x013fffff]
>[    0.000000] RAMDISK: [mem 0x35b7c000-0x36db5fff]
>[    0.000000] ACPI: RSDP 000fa940 00014 (v00 AMI   )
>[    0.000000] ACPI: RSDT 3fff0000 0002C (v01 AMIINT VIA_K7   00000010 MSFT 00000097)
>[    0.000000] ACPI: FACP 3fff0030 00081 (v01 AMIINT VIA_K7   00000011 MSFT 00000097)
>[    0.000000] ACPI: DSDT 3fff0120 032BF (v01    VIA   VIA_K7 00001000 MSFT 0100000D)
>[    0.000000] ACPI: FACS 3fff8000 00040
>[    0.000000] ACPI: APIC 3fff00c0 00054 (v01 AMIINT VIA_K7   00000009 MSFT 00000097)
>[    0.000000] ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
>[    0.000000] ACPI: Disabling ACPI support
>[    0.000000] 137MB HIGHMEM available.
>[    0.000000] 885MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 375fe000
>[    0.000000]   low ram: 0 - 375fe000
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
>[    0.000000]   Normal   [mem 0x01000000-0x375fdfff]
>[    0.000000]   HighMem  [mem 0x375fe000-0x3ffeffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0x3ffeffff]
>[    0.000000] On node 0 totalpages: 262015
>[    0.000000] free_area_init_node: node 0, pgdat c0c24740, node_mem_map f6dfd200
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1740 pages used for memmap
>[    0.000000]   Normal zone: 220978 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 276 pages used for memmap
>[    0.000000]   HighMem zone: 35038 pages, LIFO batch:7
>[    0.000000] Using APIC driver default
>[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
>[    0.000000] Intel MultiProcessor Specification v1.4
>[    0.000000]     Virtual Wire compatibility mode.
>[    0.000000] MPTABLE: OEM ID: VIA     
>[    0.000000] MPTABLE: Product ID: VT5440B     
>[    0.000000] MPTABLE: APIC at: 0xFEE00000
>[    0.000000] Processor #0 (Bootup-CPU)
>[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>[    0.000000] Processors: 1
>[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>[    0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 14 pages/cpu @f6de8000 s34944 r0 d22400 u57344
>[    0.000000] pcpu-alloc: s34944 r0 d22400 u57344 alloc=14*4096
>[    0.000000] pcpu-alloc: [0] 0 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.7.8-202.fc18.i686.PAE root=/dev/mapper/vg_gastonv-lv_root ro rd.md=0 rd.dm=0 rd.lvm.lv=vg_gastonv/lv_root SYSFONT=True KEYTABLE=be-latin1 rd.lvm.lv=vg_gastonv/lv_swap rd.luks=0 LANG=nl_NL.UTF-8 rhgb quiet
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] __ex_table already sorted, skipping sort
>[    0.000000] Initializing CPU#0
>[    0.000000] allocated 2096896 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] Initializing HighMem for node 0 (000375fe:0003fff0)
>[    0.000000] Memory: 1008104k/1048512k available (5681k kernel code, 39956k reserved, 2742k data, 672k init, 141256k highmem)
>[    0.000000] virtual kernel memory layout:
>    fixmap  : 0xffa96000 - 0xfffff000   (5540 kB)
>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
>      .init : 0xc0c3b000 - 0xc0ce3000   ( 672 kB)
>      .data : 0xc098c4fb - 0xc0c3a080   (2742 kB)
>      .text : 0xc0400000 - 0xc098c4fb   (5681 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
>[    0.000000] NR_IRQS:2304 nr_irqs:256 16
>[    0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1350.007 MHz processor
>[    0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2700.01 BogoMIPS (lpj=1350007)
>[    0.001012] pid_max: default: 32768 minimum: 301
>[    0.002100] Security Framework initialized
>[    0.002125] SELinux:  Initializing.
>[    0.002149] SELinux:  Starting in permissive mode
>[    0.002279] Mount-cache hash table entries: 512
>[    0.002812] Initializing cgroup subsys cpuacct
>[    0.002819] Initializing cgroup subsys memory
>[    0.002841] Initializing cgroup subsys devices
>[    0.002846] Initializing cgroup subsys freezer
>[    0.002850] Initializing cgroup subsys net_cls
>[    0.002854] Initializing cgroup subsys blkio
>[    0.002858] Initializing cgroup subsys perf_event
>[    0.002924] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
>[    0.002934] mce: CPU supports 4 MCE banks
>[    0.002974] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
>Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
>tlb_flushall_shift: -1
>[    0.012874] Freeing SMP alternatives: 24k freed
>[    0.014764] ftrace: allocating 23265 entries in 46 pages
>[    0.027197] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.027476] ExtINT not setup in hardware but reported by MP table
>[    0.029000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.039096] smpboot: CPU0: AMD Athlon(tm) XP 1500+ (fam: 06, model: 08, stepping: 01)
>[    0.141024] Performance Events: AMD PMU driver.
>[    0.141035] ... version:                0
>[    0.141038] ... bit width:              48
>[    0.141040] ... generic registers:      4
>[    0.141043] ... value mask:             0000ffffffffffff
>[    0.141046] ... max period:             00007fffffffffff
>[    0.141048] ... fixed-purpose events:   0
>[    0.141051] ... event mask:             000000000000000f
>[    0.144408] Brought up 1 CPUs
>[    0.144419] smpboot: Total of 1 processors activated (2700.01 BogoMIPS)
>[    0.145225] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.145607] devtmpfs: initialized
>[    0.146352] PM: Registering ACPI NVS region [mem 0x3fff8000-0x3fffffff] (32768 bytes)
>[    0.148669] atomic64 test passed for i586+ platform with CX8 and with SSE
>[    0.148732] RTC time:  8:02:01, date: 02/19/13
>[    0.148870] NET: Registered protocol family 16
>[    0.154269] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>[    0.154273] PCI: Using configuration type 1 for base access
>[    0.156957] bio: create slab <bio-0> at 0
>[    0.157123] ACPI: Interpreter disabled.
>[    0.157284] vgaarb: loaded
>[    0.157488] SCSI subsystem initialized
>[    0.157577] libata version 3.00 loaded.
>[    0.157682] usbcore: registered new interface driver usbfs
>[    0.157703] usbcore: registered new interface driver hub
>[    0.157761] usbcore: registered new device driver usb
>[    0.157918] PCI: Probing PCI hardware
>[    0.157924] PCI: root bus 00: using default resources
>[    0.157939] PCI: Probing PCI hardware (bus 00)
>[    0.157989] PCI host bridge to bus 0000:00
>[    0.158014] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>[    0.158020] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3ffffffff]
>[    0.158025] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
>[    0.158060] pci 0000:00:00.0: [1106:3189] type 00 class 0x060000
>[    0.158080] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
>[    0.158175] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
>[    0.158232] pci 0000:00:01.0: supports D1
>[    0.158264] pci 0000:00:07.0: [1131:7134] type 00 class 0x048000
>[    0.158284] pci 0000:00:07.0: reg 10: [mem 0xdffffc00-0xdfffffff]
>[    0.158361] pci 0000:00:07.0: supports D1 D2
>[    0.158389] pci 0000:00:0a.0: [1274:5880] type 00 class 0x040100
>[    0.158409] pci 0000:00:0a.0: reg 10: [io  0xec00-0xec3f]
>[    0.158487] pci 0000:00:0a.0: supports D1 D2
>[    0.158518] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
>[    0.158568] pci 0000:00:10.0: reg 20: [io  0xe000-0xe01f]
>[    0.158614] pci 0000:00:10.0: supports D1 D2
>[    0.158619] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.158652] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
>[    0.158703] pci 0000:00:10.1: reg 20: [io  0xe400-0xe41f]
>[    0.158750] pci 0000:00:10.1: supports D1 D2
>[    0.158754] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.158782] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
>[    0.158832] pci 0000:00:10.2: reg 20: [io  0xe800-0xe81f]
>[    0.158878] pci 0000:00:10.2: supports D1 D2
>[    0.158883] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.158910] pci 0000:00:10.3: [1106:3104] type 00 class 0x0c0320
>[    0.158931] pci 0000:00:10.3: reg 10: [mem 0xdffffb00-0xdffffbff]
>[    0.159021] pci 0000:00:10.3: supports D1 D2
>[    0.159026] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.159061] pci 0000:00:11.0: [1106:3177] type 00 class 0x060100
>[    0.159129] HPET not enabled in BIOS. You might try hpet=force boot option
>[    0.159141] pci 0000:00:11.0: quirk: [io  0x0800-0x087f] claimed by vt8235 PM
>[    0.159148] pci 0000:00:11.0: quirk: [io  0x0400-0x040f] claimed by vt8235 SMB
>[    0.159198] pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a
>[    0.159252] pci 0000:00:11.1: reg 20: [io  0xfc00-0xfc0f]
>[    0.159327] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
>[    0.159348] pci 0000:00:11.5: reg 10: [io  0xdc00-0xdcff]
>[    0.159428] pci 0000:00:11.5: supports D1 D2
>[    0.159456] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
>[    0.159476] pci 0000:00:12.0: reg 10: [io  0xd800-0xd8ff]
>[    0.159490] pci 0000:00:12.0: reg 14: [mem 0xdffffa00-0xdffffaff]
>[    0.159559] pci 0000:00:12.0: supports D1 D2
>[    0.159564] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.159640] pci 0000:01:00.0: [10de:0326] type 00 class 0x030000
>[    0.159660] pci 0000:01:00.0: reg 10: [mem 0xde000000-0xdeffffff]
>[    0.159672] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff pref]
>[    0.159708] pci 0000:01:00.0: reg 30: [mem 0xdfee0000-0xdfefffff pref]
>[    0.159781] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.159791] pci 0000:00:01.0:   bridge window [mem 0xdde00000-0xdfefffff]
>[    0.159798] pci 0000:00:01.0:   bridge window [mem 0xbdd00000-0xddcfffff pref]
>[    0.159813] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
>[    0.160386] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.160509] pci 0000:00:11.0: VIA IRQ router [1106:3177]
>[    0.160518] PCI: pci_cache_line_size set to 32 bytes
>[    0.160574] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>[    0.160579] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
>[    0.160830] NetLabel: Initializing
>[    0.160834] NetLabel:  domain hash size = 128
>[    0.160837] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.160864] NetLabel:  unlabeled traffic allowed by default
>[    0.161116] Switching to clocksource refined-jiffies
>[    0.178317] pnp: PnP ACPI: disabled
>[    0.182345] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.182363] pci 0000:00:01.0:   bridge window [mem 0xdde00000-0xdfefffff]
>[    0.182371] pci 0000:00:01.0:   bridge window [mem 0xbdd00000-0xddcfffff pref]
>[    0.182393] pci 0000:00:01.0: setting latency timer to 64
>[    0.182402] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>[    0.182407] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3ffffffff]
>[    0.182413] pci_bus 0000:01: resource 1 [mem 0xdde00000-0xdfefffff]
>[    0.182418] pci_bus 0000:01: resource 2 [mem 0xbdd00000-0xddcfffff pref]
>[    0.182558] NET: Registered protocol family 2
>[    0.182921] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.185617] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.186974] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.187162] TCP: reno registered
>[    0.187173] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.187212] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.187447] NET: Registered protocol family 1
>[    0.187484] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
>[    0.187533] pci 0000:00:10.0: PCI->APIC IRQ transform: INT A -> IRQ 21
>[    0.187566] pci 0000:00:10.1: PCI->APIC IRQ transform: INT B -> IRQ 21
>[    0.187594] pci 0000:00:10.2: PCI->APIC IRQ transform: INT C -> IRQ 21
>[    0.187621] pci 0000:00:10.3: PCI->APIC IRQ transform: INT D -> IRQ 21
>[    0.187718] pci 0000:01:00.0: Boot video device
>[    0.187724] PCI: CLS 32 bytes, default 32
>[    0.187872] Unpacking initramfs...
>[    1.041984] Freeing initrd memory: 18664k freed
>[    1.082098] platform rtc_cmos: registered platform RTC device (no PNP device found)
>[    1.082380] apm: BIOS not found.
>[    1.082914] Initialise module verification
>[    1.083035] audit: initializing netlink socket (disabled)
>[    1.083069] type=2000 audit(1361260922.082:1): initialized
>[    1.118573] bounce pool size: 64 pages
>[    1.118600] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.121631] VFS: Disk quotas dquot_6.5.2
>[    1.121746] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    1.122822] msgmni has been set to 1729
>[    1.123021] SELinux:  Registering netfilter hooks
>[    1.124191] alg: No test for stdrng (krng)
>[    1.124205] NET: Registered protocol family 38
>[    1.124213] Key type asymmetric registered
>[    1.124217] Asymmetric key parser 'x509' registered
>[    1.124350] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    1.124415] io scheduler noop registered
>[    1.124419] io scheduler deadline registered
>[    1.124440] io scheduler cfq registered (default)
>[    1.124740] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.124783] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    1.124787] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    1.124988] vesafb: mode is 1024x768x32, linelength=4096, pages=0
>[    1.124993] vesafb: scrolling: redraw
>[    1.124998] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    1.125305] vesafb: framebuffer at 0xc0000000, mapped to 0xf7e80000, using 3072k, total 3072k
>[    1.125558] Console: switching to colour frame buffer device 128x48
>[    1.236461] fb0: VESA VGA frame buffer device
>[    1.236748] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.237846] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.238846] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>[    1.239677] Non-volatile memory driver v1.3
>[    1.239683] Linux agpgart interface v0.103
>[    1.239984] agpgart: Detected VIA KT400/KT400A/KT600 chipset
>[    1.250834] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
>[    1.252499] loop: module loaded
>[    1.252819] libphy: Fixed MDIO Bus: probed
>[    1.252937] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.252978] ehci_hcd 0000:00:10.3: PCI->APIC IRQ transform: INT D -> IRQ 21
>[    1.253024] ehci_hcd 0000:00:10.3: EHCI Host Controller
>[    1.253099] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
>[    1.253218] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdffffb00
>[    1.258846] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
>[    1.258922] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.258928] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.258933] usb usb1: Product: EHCI Host Controller
>[    1.258938] usb usb1: Manufacturer: Linux 3.7.8-202.fc18.i686.PAE ehci_hcd
>[    1.258943] usb usb1: SerialNumber: 0000:00:10.3
>[    1.259170] hub 1-0:1.0: USB hub found
>[    1.259184] hub 1-0:1.0: 6 ports detected
>[    1.259429] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.259456] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.259515] uhci_hcd 0000:00:10.0: PCI->APIC IRQ transform: INT A -> IRQ 21
>[    1.259536] uhci_hcd 0000:00:10.0: UHCI Host Controller
>[    1.259629] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>[    1.259665] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
>[    1.259749] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.259755] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.259759] usb usb2: Product: UHCI Host Controller
>[    1.259764] usb usb2: Manufacturer: Linux 3.7.8-202.fc18.i686.PAE uhci_hcd
>[    1.259768] usb usb2: SerialNumber: 0000:00:10.0
>[    1.259963] hub 2-0:1.0: USB hub found
>[    1.259973] hub 2-0:1.0: 2 ports detected
>[    1.260099] uhci_hcd 0000:00:10.1: PCI->APIC IRQ transform: INT B -> IRQ 21
>[    1.260114] uhci_hcd 0000:00:10.1: UHCI Host Controller
>[    1.260221] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>[    1.260251] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400
>[    1.260320] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.260326] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.260330] usb usb3: Product: UHCI Host Controller
>[    1.260335] usb usb3: Manufacturer: Linux 3.7.8-202.fc18.i686.PAE uhci_hcd
>[    1.260339] usb usb3: SerialNumber: 0000:00:10.1
>[    1.260512] hub 3-0:1.0: USB hub found
>[    1.260522] hub 3-0:1.0: 2 ports detected
>[    1.260654] uhci_hcd 0000:00:10.2: PCI->APIC IRQ transform: INT C -> IRQ 21
>[    1.260668] uhci_hcd 0000:00:10.2: UHCI Host Controller
>[    1.260744] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>[    1.260773] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
>[    1.260864] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.260869] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.260874] usb usb4: Product: UHCI Host Controller
>[    1.260878] usb usb4: Manufacturer: Linux 3.7.8-202.fc18.i686.PAE uhci_hcd
>[    1.260882] usb usb4: SerialNumber: 0000:00:10.2
>[    1.261090] hub 4-0:1.0: USB hub found
>[    1.261099] hub 4-0:1.0: 2 ports detected
>[    1.261367] usbcore: registered new interface driver usbserial
>[    1.261387] usbcore: registered new interface driver usbserial_generic
>[    1.261405] usbserial: USB Serial support registered for generic
>[    1.261463] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    1.510922] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.511100] mousedev: PS/2 mouse device common for all mice
>[    1.511546] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
>[    1.511601] rtc0: alarms up to one day, 114 bytes nvram
>[    1.511786] device-mapper: uevent: version 1.0.3
>[    1.511961] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
>[    1.512056] cpuidle: using governor ladder
>[    1.512060] cpuidle: using governor menu
>[    1.512270] EFI Variables Facility v0.08 2004-May-17
>[    1.512631] usbcore: registered new interface driver usbhid
>[    1.512634] usbhid: USB HID core driver
>[    1.512732] drop_monitor: Initializing network drop monitor service
>[    1.512961] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.513047] TCP: cubic registered
>[    1.513052] Initializing XFRM netlink socket
>[    1.513311] NET: Registered protocol family 10
>[    1.513690] mip6: Mobile IPv6
>[    1.513697] NET: Registered protocol family 17
>[    1.514180] Using IPI No-Shortcut mode
>[    1.514376] PM: Hibernation image not present or could not be loaded.
>[    1.514380] Loading module verification certificates
>[    1.523319] MODSIGN: Loaded cert 'Fedora kernel signing key: f7c47da74637921ddc4f0815f3849c911b7fb5af'
>[    1.523367] registered taskstats version 1
>[    1.523720]   Magic number: 1:211:18
>[    1.523740]  ep_81: hash matches
>[    1.523748]  ep_81: hash matches
>[    1.523755]  ep_81: hash matches
>[    1.523762]  ep_81: hash matches
>[    1.523904] rtc_cmos rtc_cmos: setting system clock to 2013-02-19 08:02:03 UTC (1361260923)
>[    1.524170] Freeing unused kernel memory: 672k freed
>[    1.525749] Write protecting the kernel text: 5684k
>[    1.525903] Write protecting the kernel read-only data: 2212k
>[    1.537392] systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    1.537591] systemd[1]: Running in initial RAM disk.
>[    1.537950] systemd[1]: No hostname configured.
>[    1.537965] systemd[1]: Set hostname to <localhost>.
>[    1.538187] systemd[1]: Initializing machine ID from random generator.
>[    1.543041] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.560855] usb 1-1: new high-speed USB device number 2 using ehci_hcd
>[    1.564897] systemd[1]: Starting Encrypted Volumes.
>[    1.564968] systemd[1]: Reached target Encrypted Volumes.
>[    1.565218] systemd[1]: Starting udev Kernel Socket.
>[    1.565365] systemd[1]: Listening on udev Kernel Socket.
>[    1.565498] systemd[1]: Starting udev Control Socket.
>[    1.565628] systemd[1]: Listening on udev Control Socket.
>[    1.565664] systemd[1]: Starting Journal Socket.
>[    1.565863] systemd[1]: Listening on Journal Socket.
>[    1.566389] systemd[1]: Started Load Kernel Modules.
>[    1.566424] systemd[1]: Starting Journal Service...
>[    1.572356] systemd[1]: Started Journal Service.
>[    1.575120] systemd[1]: Starting Sockets.
>[    1.575187] systemd[1]: Reached target Sockets.
>[    1.575242] systemd[1]: Starting dracut cmdline hook...
>[    1.577971] systemd[1]: Starting Swap.
>[    1.578030] systemd[1]: Reached target Swap.
>[    1.578067] systemd[1]: Starting Local File Systems.
>[    1.578096] systemd[1]: Reached target Local File Systems.
>[    2.005851] systemd-udevd[107]: starting version 197
>[    2.083748] Switching to clocksource tsc
>[    2.520383] pata_via 0000:00:11.1: version 0.3.4
>[    2.520431] pata_via 0000:00:11.1: PCI->APIC IRQ transform: INT A -> IRQ 22
>[    2.525749] scsi0 : pata_via
>[    2.527665] scsi1 : pata_via
>[    2.527814] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>[    2.527820] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>[    2.557644] [drm] Initialized drm 1.1.0 20060810
>[    2.684921] ata1.00: ATA-4: ST310232A, 3.09, max UDMA/33
>[    2.684935] ata1.00: 20005650 sectors, multi 16: LBA 
>[    2.686040] ata1.01: HPA detected: current 66055248, native 78165360
>[    2.686048] ata1.01: ATA-5: WDC WD400BB-00DEA0, 05.03E05, max UDMA/100
>[    2.686053] ata1.01: 66055248 sectors, multi 16: LBA 
>[    2.691760] ata1.00: configured for UDMA/33
>[    2.698831] ata1.01: configured for UDMA/100
>[    2.699135] scsi 0:0:0:0: Direct-Access     ATA      ST310232A        3.09 PQ: 0 ANSI: 5
>[    2.699671] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.699956] scsi 0:0:1:0: Direct-Access     ATA      WDC WD400BB-00DE 05.0 PQ: 0 ANSI: 5
>[    2.700241] sd 0:0:1:0: Attached scsi generic sg1 type 0
>[    2.700586] sd 0:0:0:0: [sda] 20005650 512-byte logical blocks: (10.2 GB/9.53 GiB)
>[    2.700690] sd 0:0:0:0: [sda] Write Protect is off
>[    2.700697] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.700741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.712060] sd 0:0:1:0: [sdb] 66055248 512-byte logical blocks: (33.8 GB/31.4 GiB)
>[    2.712493]  sda: sda1 sda2 sda3
>[    2.713407] sd 0:0:1:0: [sdb] Write Protect is off
>[    2.713419] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.713631] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.735225] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.735344]  sdb: sdb1 sdb2
>[    2.736030] sd 0:0:1:0: [sdb] Attached SCSI disk
>[    2.858485] ata2.00: ATA-7: Maxtor 6L080P0, BAH41G10, max UDMA/133
>[    2.858499] ata2.00: 160086528 sectors, multi 16: LBA48 
>[    2.858512] ata2.01: ATAPI: TSSTcorp CDDVDW SH-S222L, SB03, max UDMA/66
>[    2.858535] ata2.00: limited to UDMA/33 due to 40-wire cable
>[    2.858541] ata2.01: limited to UDMA/33 due to 40-wire cable
>[    2.866274] ata2.00: configured for UDMA/33
>[    2.871727] ata2.01: configured for UDMA/33
>[    2.872313] scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6L080P0   BAH4 PQ: 0 ANSI: 5
>[    2.872791] sd 1:0:0:0: [sdc] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
>[    2.872898] sd 1:0:0:0: [sdc] Write Protect is off
>[    2.872905] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    2.872952] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.873534] sd 1:0:0:0: Attached scsi generic sg2 type 0
>[    2.907283]  sdc: sdc1
>[    2.908189] scsi 1:0:1:0: CD-ROM            TSSTcorp CDDVDW SH-S222L  SB03 PQ: 0 ANSI: 5
>[    2.912385] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    2.912398] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    2.912746] sd 1:0:0:0: [sdc] Attached SCSI disk
>[    2.912887] sr 1:0:1:0: Attached scsi CD-ROM sr0
>[    2.913160] sr 1:0:1:0: Attached scsi generic sg3 type 5
>[   12.087059] usb 1-1: device not accepting address 2, error -110
>[   12.190040] usb 1-1: new high-speed USB device number 3 using ehci_hcd
>[   27.325621] usb 1-1: device descriptor read/64, error -110
>[   35.882600] bio: create slab <bio-1> at 1
>[   36.244774] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[   36.618142] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[   42.563183] usb 1-1: device descriptor read/64, error -110
>[   42.766143] usb 1-1: new high-speed USB device number 4 using ehci_hcd
>[   53.192474] usb 1-1: device not accepting address 4, error -110
>[   53.294463] usb 1-1: new high-speed USB device number 5 using ehci_hcd
>[   63.720787] usb 1-1: device not accepting address 5, error -110
>[   63.720826] hub 1-0:1.0: unable to enumerate USB device on port 1
>[   64.051979] systemd-journald[44]: Received SIGTERM
>[   64.191731] usb 2-1: new full-speed USB device number 2 using uhci_hcd
>[   64.320720] usb 2-1: not running at top speed; connect to a high speed hub
>[   64.348710] usb 2-1: New USB device found, idVendor=04b8, idProduct=0007
>[   64.348720] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[   64.348726] usb 2-1: Product: USB2.0 Printer
>[   64.348730] usb 2-1: Manufacturer: EPSON
>[   64.348735] usb 2-1: SerialNumber: 423035303246DE4593
>[   64.557673] usb 3-2: new low-speed USB device number 2 using uhci_hcd
>[   64.722682] usb 3-2: New USB device found, idVendor=046d, idProduct=c050
>[   64.722695] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   64.722702] usb 3-2: Product: USB-PS/2 Optical Mouse
>[   64.722706] usb 3-2: Manufacturer: Logitech
>[   64.740738] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input1
>[   64.740987] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2/input0
>[   65.772511] SELinux:  Disabled at runtime.
>[   65.772550] SELinux:  Unregistering netfilter hooks
>[   65.772653] type=1404 audit(1361260987.747:2): selinux=0 auid=4294967295 ses=4294967295
>[   65.830358] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
>[   69.279104] systemd-udevd[317]: starting version 197
>[   69.948445] EXT4-fs (dm-1): re-mounted. Opts: (null)
>[   73.115051] microcode: AMD CPU family 0x6 not supported
>[   75.064579] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
>[   75.064682] via-rhine 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 23
>[   75.072164] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0xdffffa00, 00:0c:76:93:f9:27, IRQ 23
>[   75.072941] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
>[   75.200572] media: Linux media interface: v0.10
>[   75.379122] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0007
>[   75.380816] usbcore: registered new interface driver usblp
>[   75.662498] NET: Registered protocol family 23
>[   75.754635] Linux video capture interface: v2.00
>[   76.741080] systemd-udevd[350]: renamed network interface eth0 to em1
>[   77.064224] Adding 2064380k swap on /dev/mapper/vg_gastonv-lv_swap.  Priority:-1 extents:1 across:2064380k 
>[   77.142489] ACPI Exception: AE_BAD_PARAMETER, Thread 4137166256 could not acquire Mutex [0x1] (20120913/utmutex-276)
>[   77.383954] snd_via82xx 0000:00:11.5: PCI->APIC IRQ transform: INT C -> IRQ 22
>[   77.384138] snd_via82xx 0000:00:11.5: setting latency timer to 64
>[   77.496867] saa7130/34: v4l2 driver version 0, 2, 17 loaded
>[   77.899309] saa7134 0000:00:07.0: PCI->APIC IRQ transform: INT A -> IRQ 18
>[   77.899328] saa7134[0]: found at 0000:00:07.0, rev: 1, irq: 18, latency: 32, mmio: 0xdffffc00
>[   77.899339] saa7134[0]: subsystem: 11bd:002b, board: Pinnacle PCTV Stereo (saa7134) [card=26,autodetected]
>[   77.899377] saa7134[0]: board init: gpio is 0
>[   78.037904] saa7134[0]: i2c eeprom 00: bd 11 2b 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
>[   78.037927] saa7134[0]: i2c eeprom 10: 00 00 19 0e ff 20 ff ff ff ff ff ff ff ff ff ff
>[   78.037941] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 53 ff ff ff ff
>[   78.037954] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   78.037967] saa7134[0]: i2c eeprom 40: ff 07 00 c0 86 ff 01 03 ff ff ff ff ff ff ff ff
>[   78.037980] saa7134[0]: i2c eeprom 50: 0c 22 17 36 03 02 91 bd ff ff ff ff ff ff ff ff
>[   78.037993] saa7134[0]: i2c eeprom 60: 03 03 19 71 fb ff ff ff ff ff ff ff ff ff ff ff
>[   78.038006] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   78.038019] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   78.038032] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   78.038045] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   78.038058] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   78.038071] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   78.038084] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   78.038097] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   78.038110] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>[   79.047022] tda9887 1-0043: creating new instance
>[   79.047034] tda9887 1-0043: tda988[5/6/7] found
>[   79.049349] tuner 1-0043: Tuner 74 found with type(s) Radio TV.
>[   79.606264] Chip ID is not zero. It is not a TEA5767
>[   79.606284] tuner 1-0060: Tuner -1 found with type(s) Radio TV.
>[   79.899191] mt20xx 1-0060: microtune: companycode=3cbf part=42 rev=22
>[   79.907183] mt20xx 1-0060: microtune MT2050 found, OK
>[   79.927562] saa7134[0]: registered device video0 [v4l2]
>[   79.927707] saa7134[0]: registered device vbi0
>[   79.927911] snd_ens1371 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 17
>[   80.125103] saa7134 ALSA driver for DMA sound loaded
>[   80.125470] saa7134[0]/alsa: saa7134[0] at 0xdffffc00 irq 18 registered as card -1
>[   84.182913] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[   88.382669] systemd-journald[318]: Received SIGUSR1
>[   92.119668] nf_conntrack version 0.5.0 (16054 buckets, 64216 max)
>[   93.428731] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   96.757154] RPC: Registered named UNIX socket transport module.
>[   96.757166] RPC: Registered udp transport module.
>[   96.757169] RPC: Registered tcp transport module.
>[   96.757172] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   96.950776] Bluetooth: Core ver 2.16
>[   96.950851] NET: Registered protocol family 31
>[   96.950855] Bluetooth: HCI device and connection manager initialized
>[   96.950883] Bluetooth: HCI socket layer initialized
>[   96.950889] Bluetooth: L2CAP socket layer initialized
>[   96.950903] Bluetooth: SCO socket layer initialized
>[   97.065594] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   97.065605] Bluetooth: BNEP filters: protocol multicast
>[   97.065635] Bluetooth: BNEP socket layer initialized
>[   99.212792] usblp0: removed
>[   99.232680] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0007
>[  129.451163] fuse init (API version 7.20)

Actions: View

Attachments on bug 907801: 693299 | 696384 | 696388 | 696389 | 699364