Attachment 703374 Details for Bug 808008 – still occurs in fedora 18 see dmesg

still occurs in fedora 18 see dmesg

dmesg-firmware-kernel-bug-808008-20130227.txt (text/plain), 215.61 KB, created by a.thiaville on 2013-02-27 11:37:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: a.thiaville

Created: 2013-02-27 11:37:34 UTC

Size: 215.61 KB

patch

obsolete

>[17820.159250] sd 0:0:0:0: [sda] Starting disk
>[17820.183097] PM: resume of devices complete after 8567.832 msecs
>[17820.183550] PM: Finishing wakeup.
>[17820.183551] Restarting tasks ... done.
>[17820.547178] r8169 0000:02:00.0 em1: link down
>[17820.547195] r8169 0000:02:00.0 em1: link down
>[17820.547228] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[17822.148238] r8169 0000:02:00.0 em1: link up
>[17822.148259] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[17827.159335] Adjusting tsc more than 11% (6912975 vs 6912284)
>[24882.706054] r8712u: 1 RCR=0x153f00e
>[24882.707593] r8712u: 2 RCR=0x553f00e
>[24882.813875] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[24962.160036] SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
>[24992.559017] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[24992.809623] r8169 0000:02:00.0 em1: link down
>[24992.809654] r8169 0000:02:00.0 em1: link down
>[24992.809714] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[24993.232565] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[24994.368858] r8169 0000:02:00.0 em1: link up
>[24994.368868] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[24997.363210] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[42866.609427] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[42866.939319] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[42867.088162] r8169 0000:02:00.0 em1: link down
>[42867.088247] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[42867.088665] r8169 0000:02:00.0 em1: link down
>[42867.181108] r8169 0000:02:00.0 em1: link down
>[42867.181351] r8169 0000:02:00.0 em1: link down
>[42867.181465] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[42867.595114] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[42867.759021] r8169 0000:02:00.0 em1: link down
>[42867.759190] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[42868.401400] PM: Syncing filesystems ... done.
>[42868.402926] PM: Preparing system for mem sleep
>[42868.523339] Freezing user space processes ... (elapsed 0.04 seconds) done.
>[42868.568744] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[42868.579726] PM: Entering mem sleep
>[42868.579752] Suspending console(s) (use no_console_suspend to debug)
>[42868.580185] r8712: suspending...
>[42868.580317] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[42868.615450] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[42868.615483] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[42868.615597] serial 00:06: disabled
>[42868.615690] serial 00:05: disabled
>[42868.618608] ACPI handle has no context!
>[42868.736351] sd 0:0:0:0: [sda] Stopping disk
>[42869.633464] PM: suspend of devices complete after 1053.694 msecs
>[42869.633685] PM: late suspend of devices complete after 0.218 msecs
>[42869.633848] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[42869.644490] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[42869.644580] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[42869.655452] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[42869.655475] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[42869.655505] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[42869.666449] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[42869.666471] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[42869.666551] PM: noirq suspend of devices complete after 32.869 msecs
>[42869.666589] ACPI: Preparing to enter system sleep state S3
>[42869.674641] PM: Saving platform NVS memory
>[42869.674855] Disabling non-boot CPUs ...
>[42869.675178] Broke affinity for irq 16
>[42869.676222] smpboot: CPU 1 is now offline
>[42869.676550] CPU 1 offline: Remove Rx thread
>[42869.676900] Broke affinity for irq 17
>[42869.676906] Broke affinity for irq 19
>[42869.676912] Broke affinity for irq 22
>[42869.677939] smpboot: CPU 2 is now offline
>[42869.678271] CPU 2 offline: Remove Rx thread
>[42869.678651] ACPI: Low-level resume complete
>[42869.678686] PM: Restoring platform NVS memory
>[42869.678746] PCI-DMA: Resuming GART IOMMU
>[42869.678746] PCI-DMA: Restoring GART aperture settings
>[42869.678995] LVT offset 0 assigned for vector 0xf9
>[42869.679001] microcode: CPU0: new patch_level=0x010000db
>[42869.679007] Enabling non-boot CPUs ...
>[42869.679084] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[42869.690119] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[42869.690120] perf: IBS APIC setup failed on cpu #1
>[42869.692468] microcode: CPU1: new patch_level=0x010000db
>[42869.692475] bnx2i: CPU 1 online: Create Rx thread
>[42869.692521] CPU1 is up
>[42869.692557] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[42869.703591] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[42869.703592] perf: IBS APIC setup failed on cpu #2
>[42869.705885] microcode: CPU2: new patch_level=0x010000db
>[42869.705892] bnx2i: CPU 2 online: Create Rx thread
>[42869.705950] CPU2 is up
>[42869.706440] ACPI: Waking up from system sleep state S3
>[42869.732998] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[42869.733020] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[42869.743977] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[42869.744005] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[42869.744027] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[42869.754976] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[42869.766028] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[42869.810080] PM: noirq resume of devices complete after 87.966 msecs
>[42869.810251] PM: early resume of devices complete after 0.141 msecs
>[42869.810593] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[42869.810662] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[42869.811815] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[42869.811816] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[42869.812521] serial 00:05: activated
>[42869.812924] serial 00:06: activated
>[42869.812977] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[42869.823787] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[42869.823847] radeon 0000:01:00.0: WB enabled
>[42869.823849] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[42869.869965] [drm] ring test on 0 succeeded in 1 usecs
>[42869.869982] [drm] ib test on ring 0 succeeded in 0 usecs
>[42869.884159] r8169 0000:02:00.0 em1: link down
>[42870.027158] r8712: resuming...
>[42870.053900] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[42870.114936] ata6: SATA link down (SStatus 0 SControl 300)
>[42870.117906] ata4: SATA link down (SStatus 0 SControl 300)
>[42870.117941] ata5: SATA link down (SStatus 0 SControl 300)
>[42870.117975] ata3: SATA link down (SStatus 0 SControl 300)
>[42870.269865] ata2: softreset failed (device not ready)
>[42870.269867] ata2: applying PMP SRST workaround and retrying
>[42870.363858] firewire_core 0000:03:00.0: rediscovered device fw0
>[42870.424842] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[42870.430970] ata2.00: configured for UDMA/100
>[42871.488902] r8169 0000:02:00.0 em1: link up
>[42871.488910] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[42878.224612] ata1: softreset failed (device not ready)
>[42878.224614] ata1: applying PMP SRST workaround and retrying
>[42878.379612] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[42878.410558] ata1.00: configured for UDMA/133
>[42878.410673] sd 0:0:0:0: [sda] Starting disk
>[42878.434415] PM: resume of devices complete after 8625.509 msecs
>[42878.434871] PM: Finishing wakeup.
>[42878.434872] Restarting tasks ... done.
>[42881.348139] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[43664.823318] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[43665.152338] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[43665.298079] r8169 0000:02:00.0 em1: link down
>[43665.298110] r8169 0000:02:00.0 em1: link down
>[43665.298273] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[43665.385084] r8169 0000:02:00.0 em1: link down
>[43665.385175] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[43665.805258] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[43665.967019] r8169 0000:02:00.0 em1: link down
>[43665.967108] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[43666.668380] PM: Syncing filesystems ... done.
>[43666.840170] PM: Preparing system for mem sleep
>[43666.969348] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[43667.003642] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[43667.014641] PM: Entering mem sleep
>[43667.014668] Suspending console(s) (use no_console_suspend to debug)
>[43667.015101] r8712: suspending...
>[43667.015229] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[43667.015391] sd 0:0:0:0: [sda] Stopping disk
>[43667.051612] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[43667.051646] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[43667.051756] serial 00:06: disabled
>[43667.051848] serial 00:05: disabled
>[43667.053557] ACPI handle has no context!
>[43667.901409] PM: suspend of devices complete after 886.698 msecs
>[43667.901630] PM: late suspend of devices complete after 0.218 msecs
>[43667.901792] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[43667.912438] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[43667.912528] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[43667.923418] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[43667.923441] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[43667.923471] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[43667.934416] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[43667.934439] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[43667.934519] PM: noirq suspend of devices complete after 32.891 msecs
>[43667.934557] ACPI: Preparing to enter system sleep state S3
>[43667.943581] PM: Saving platform NVS memory
>[43667.943790] Disabling non-boot CPUs ...
>[43667.944114] Broke affinity for irq 16
>[43667.945166] smpboot: CPU 1 is now offline
>[43667.945456] CPU 1 offline: Remove Rx thread
>[43667.945836] Broke affinity for irq 17
>[43667.945843] Broke affinity for irq 19
>[43667.945849] Broke affinity for irq 22
>[43667.946877] smpboot: CPU 2 is now offline
>[43667.947149] CPU 2 offline: Remove Rx thread
>[43667.947518] ACPI: Low-level resume complete
>[43667.947553] PM: Restoring platform NVS memory
>[43667.947613] PCI-DMA: Resuming GART IOMMU
>[43667.947613] PCI-DMA: Restoring GART aperture settings
>[43667.947862] LVT offset 0 assigned for vector 0xf9
>[43667.947868] microcode: CPU0: new patch_level=0x010000db
>[43667.947903] Enabling non-boot CPUs ...
>[43667.947968] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[43667.959002] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[43667.959004] perf: IBS APIC setup failed on cpu #1
>[43667.961346] microcode: CPU1: new patch_level=0x010000db
>[43667.961353] bnx2i: CPU 1 online: Create Rx thread
>[43667.961399] CPU1 is up
>[43667.961436] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[43667.972469] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[43667.972470] perf: IBS APIC setup failed on cpu #2
>[43667.974764] microcode: CPU2: new patch_level=0x010000db
>[43667.974770] bnx2i: CPU 2 online: Create Rx thread
>[43667.974818] CPU2 is up
>[43667.975314] ACPI: Waking up from system sleep state S3
>[43668.001950] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[43668.001973] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[43668.012929] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[43668.012957] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[43668.012979] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[43668.023927] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[43668.034984] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[43668.079036] PM: noirq resume of devices complete after 87.971 msecs
>[43668.079205] PM: early resume of devices complete after 0.140 msecs
>[43668.079547] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[43668.079616] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[43668.079971] serial 00:05: activated
>[43668.080407] serial 00:06: activated
>[43668.080445] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[43668.080825] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[43668.080826] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[43668.092755] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[43668.092813] radeon 0000:01:00.0: WB enabled
>[43668.092816] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[43668.138933] [drm] ring test on 0 succeeded in 1 usecs
>[43668.138949] [drm] ib test on ring 0 succeeded in 0 usecs
>[43668.153111] r8169 0000:02:00.0 em1: link down
>[43668.295844] r8712: resuming...
>[43668.322849] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[43668.386862] ata5: SATA link down (SStatus 0 SControl 300)
>[43668.386896] ata4: SATA link down (SStatus 0 SControl 300)
>[43668.386936] ata6: SATA link down (SStatus 0 SControl 300)
>[43668.386965] ata3: SATA link down (SStatus 0 SControl 300)
>[43668.539805] ata2: softreset failed (device not ready)
>[43668.539808] ata2: applying PMP SRST workaround and retrying
>[43668.633809] firewire_core 0000:03:00.0: rediscovered device fw0
>[43668.694796] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[43668.700911] ata2.00: configured for UDMA/100
>[43669.736990] r8169 0000:02:00.0 em1: link up
>[43669.736998] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[43676.494583] ata1: softreset failed (device not ready)
>[43676.494585] ata1: applying PMP SRST workaround and retrying
>[43676.649564] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[43676.673052] ata1.00: configured for UDMA/133
>[43676.673126] sd 0:0:0:0: [sda] Starting disk
>[43676.696889] PM: resume of devices complete after 8619.012 msecs
>[43676.697343] PM: Finishing wakeup.
>[43676.697345] Restarting tasks ... done.
>[43678.963046] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[46752.930151] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[46753.260166] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[46753.402886] r8169 0000:02:00.0 em1: link down
>[46753.403041] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[46753.403238] r8169 0000:02:00.0 em1: link down
>[46753.487870] r8169 0000:02:00.0 em1: link down
>[46753.487918] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[46753.910955] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[46754.074780] r8169 0000:02:00.0 em1: link down
>[46754.074829] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[46754.637438] PM: Syncing filesystems ... done.
>[46754.767334] PM: Preparing system for mem sleep
>[46755.151882] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[46755.164489] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[46755.175469] PM: Entering mem sleep
>[46755.175497] Suspending console(s) (use no_console_suspend to debug)
>[46755.175903] r8712: suspending...
>[46755.176083] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[46755.176222] sd 0:0:0:0: [sda] Stopping disk
>[46755.212677] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[46755.212711] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[46755.212821] serial 00:06: disabled
>[46755.212915] serial 00:05: disabled
>[46755.215347] ACPI handle has no context!
>[46756.061239] PM: suspend of devices complete after 885.701 msecs
>[46756.061461] PM: late suspend of devices complete after 0.218 msecs
>[46756.061622] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[46756.072242] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[46756.072332] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[46756.083204] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[46756.083226] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[46756.083256] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[46756.094203] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[46756.094225] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[46756.094306] PM: noirq suspend of devices complete after 32.847 msecs
>[46756.094345] ACPI: Preparing to enter system sleep state S3
>[46756.102397] PM: Saving platform NVS memory
>[46756.102631] Disabling non-boot CPUs ...
>[46756.102932] Broke affinity for irq 16
>[46756.103986] smpboot: CPU 1 is now offline
>[46756.104250] CPU 1 offline: Remove Rx thread
>[46756.104642] Broke affinity for irq 17
>[46756.104649] Broke affinity for irq 22
>[46756.105681] smpboot: CPU 2 is now offline
>[46756.105853] CPU 2 offline: Remove Rx thread
>[46756.106206] ACPI: Low-level resume complete
>[46756.106241] PM: Restoring platform NVS memory
>[46756.106298] PCI-DMA: Resuming GART IOMMU
>[46756.106299] PCI-DMA: Restoring GART aperture settings
>[46756.106547] LVT offset 0 assigned for vector 0xf9
>[46756.106553] microcode: CPU0: new patch_level=0x010000db
>[46756.106554] Enabling non-boot CPUs ...
>[46756.106636] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[46756.117670] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[46756.117671] perf: IBS APIC setup failed on cpu #1
>[46756.120014] microcode: CPU1: new patch_level=0x010000db
>[46756.120021] bnx2i: CPU 1 online: Create Rx thread
>[46756.120069] CPU1 is up
>[46756.120106] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[46756.131141] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[46756.131142] perf: IBS APIC setup failed on cpu #2
>[46756.133429] microcode: CPU2: new patch_level=0x010000db
>[46756.133436] bnx2i: CPU 2 online: Create Rx thread
>[46756.133486] CPU2 is up
>[46756.134004] ACPI: Waking up from system sleep state S3
>[46756.160749] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[46756.160771] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[46756.171731] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[46756.171759] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[46756.171781] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[46756.182729] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[46756.193782] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[46756.237835] PM: noirq resume of devices complete after 87.965 msecs
>[46756.238007] PM: early resume of devices complete after 0.143 msecs
>[46756.238321] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[46756.238346] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[46756.239571] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[46756.239572] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[46756.251491] serial 00:05: activated
>[46756.251895] serial 00:06: activated
>[46756.251934] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[46756.252755] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[46756.252824] radeon 0000:01:00.0: WB enabled
>[46756.252827] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[46756.298935] [drm] ring test on 0 succeeded in 1 usecs
>[46756.298952] [drm] ib test on ring 0 succeeded in 0 usecs
>[46756.309920] r8169 0000:02:00.0 em1: link down
>[46756.462677] r8712: resuming...
>[46756.485649] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[46756.556658] ata5: SATA link down (SStatus 0 SControl 300)
>[46756.556699] ata6: SATA link down (SStatus 0 SControl 300)
>[46756.556734] ata3: SATA link down (SStatus 0 SControl 300)
>[46756.556763] ata4: SATA link down (SStatus 0 SControl 300)
>[46756.714601] ata2: softreset failed (device not ready)
>[46756.714604] ata2: applying PMP SRST workaround and retrying
>[46756.799609] firewire_core 0000:03:00.0: rediscovered device fw0
>[46756.869587] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[46756.875969] ata2.00: configured for UDMA/100
>[46757.927220] r8169 0000:02:00.0 em1: link up
>[46757.927227] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[46764.615371] ata1: softreset failed (device not ready)
>[46764.615373] ata1: applying PMP SRST workaround and retrying
>[46764.770358] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[46764.791647] ata1.00: configured for UDMA/133
>[46764.791755] sd 0:0:0:0: [sda] Starting disk
>[46764.815522] PM: resume of devices complete after 8578.852 msecs
>[46764.815969] PM: Finishing wakeup.
>[46764.815971] Restarting tasks ... done.
>[46767.615212] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[48038.817729] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[48039.147766] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[48039.298537] r8169 0000:02:00.0 em1: link down
>[48039.298574] r8169 0000:02:00.0 em1: link down
>[48039.298831] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[48039.394485] r8169 0000:02:00.0 em1: link down
>[48039.394529] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[48039.807876] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[48039.972415] r8169 0000:02:00.0 em1: link down
>[48039.972464] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[48040.818087] PM: Syncing filesystems ... done.
>[48041.009840] PM: Preparing system for mem sleep
>[48041.133755] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[48041.146095] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[48041.157084] PM: Entering mem sleep
>[48041.157112] Suspending console(s) (use no_console_suspend to debug)
>[48041.157602] r8712: suspending...
>[48041.157770] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[48041.157927] sd 0:0:0:0: [sda] Stopping disk
>[48041.193158] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[48041.193192] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[48041.193308] serial 00:06: disabled
>[48041.193405] serial 00:05: disabled
>[48041.194989] ACPI handle has no context!
>[48042.083866] PM: suspend of devices complete after 926.718 msecs
>[48042.084087] PM: late suspend of devices complete after 0.217 msecs
>[48042.084248] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[48042.094870] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[48042.094961] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[48042.105833] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[48042.105855] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[48042.105885] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[48042.116831] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[48042.116853] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[48042.116934] PM: noirq suspend of devices complete after 32.850 msecs
>[48042.116972] ACPI: Preparing to enter system sleep state S3
>[48042.125011] PM: Saving platform NVS memory
>[48042.125190] Disabling non-boot CPUs ...
>[48042.125518] Broke affinity for irq 16
>[48042.125526] Broke affinity for irq 22
>[48042.126583] smpboot: CPU 1 is now offline
>[48042.126890] CPU 1 offline: Remove Rx thread
>[48042.127240] Broke affinity for irq 17
>[48042.127246] Broke affinity for irq 19
>[48042.128280] smpboot: CPU 2 is now offline
>[48042.128612] CPU 2 offline: Remove Rx thread
>[48042.128981] ACPI: Low-level resume complete
>[48042.129016] PM: Restoring platform NVS memory
>[48042.129076] PCI-DMA: Resuming GART IOMMU
>[48042.129076] PCI-DMA: Restoring GART aperture settings
>[48042.129324] LVT offset 0 assigned for vector 0xf9
>[48042.129330] microcode: CPU0: new patch_level=0x010000db
>[48042.129348] Enabling non-boot CPUs ...
>[48042.129428] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[48042.140462] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[48042.140463] perf: IBS APIC setup failed on cpu #1
>[48042.142812] microcode: CPU1: new patch_level=0x010000db
>[48042.142820] bnx2i: CPU 1 online: Create Rx thread
>[48042.142867] CPU1 is up
>[48042.142903] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[48042.153937] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[48042.153938] perf: IBS APIC setup failed on cpu #2
>[48042.156232] microcode: CPU2: new patch_level=0x010000db
>[48042.156238] bnx2i: CPU 2 online: Create Rx thread
>[48042.156313] CPU2 is up
>[48042.156788] ACPI: Waking up from system sleep state S3
>[48042.184380] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[48042.184403] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[48042.195359] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[48042.195387] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[48042.195409] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[48042.206358] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[48042.217410] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[48042.261465] PM: noirq resume of devices complete after 87.976 msecs
>[48042.261637] PM: early resume of devices complete after 0.143 msecs
>[48042.261952] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[48042.261957] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[48042.263152] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[48042.263152] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[48042.263807] serial 00:05: activated
>[48042.264175] serial 00:06: activated
>[48042.264210] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[48042.276950] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[48042.277006] radeon 0000:01:00.0: WB enabled
>[48042.277008] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[48042.323141] [drm] ring test on 0 succeeded in 1 usecs
>[48042.323157] [drm] ib test on ring 0 succeeded in 0 usecs
>[48042.335541] r8169 0000:02:00.0 em1: link down
>[48042.478126] r8712: resuming...
>[48042.505277] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[48042.569292] ata4: SATA link down (SStatus 0 SControl 300)
>[48042.569348] ata3: SATA link down (SStatus 0 SControl 300)
>[48042.569378] ata5: SATA link down (SStatus 0 SControl 300)
>[48042.574273] ata6: SATA link down (SStatus 0 SControl 300)
>[48042.724235] ata2: softreset failed (device not ready)
>[48042.724238] ata2: applying PMP SRST workaround and retrying
>[48042.823235] firewire_core 0000:03:00.0: rediscovered device fw0
>[48042.879216] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[48042.885331] ata2.00: configured for UDMA/100
>[48043.919357] r8169 0000:02:00.0 em1: link up
>[48043.919364] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[48050.729992] ata1: softreset failed (device not ready)
>[48050.729994] ata1: applying PMP SRST workaround and retrying
>[48050.884982] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[48050.913123] ata1.00: configured for UDMA/133
>[48050.913214] sd 0:0:0:0: [sda] Starting disk
>[48050.937028] PM: resume of devices complete after 8676.740 msecs
>[48050.937473] PM: Finishing wakeup.
>[48050.937474] Restarting tasks ... done.
>[48053.325689] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[53394.325245] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[66042.801382] r8169 0000:02:00.0 em1: link down
>[66042.801411] r8169 0000:02:00.0 em1: link down
>[66042.801507] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[66044.476637] r8169 0000:02:00.0 em1: link up
>[66044.476657] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[66044.921520] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[66044.947988] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[66045.666137] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[66045.861906] r8169 0000:02:00.0 em1: link down
>[66045.861925] r8169 0000:02:00.0 em1: link down
>[66045.862019] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[66046.273943] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[66046.446750] r8169 0000:02:00.0 em1: link down
>[66046.446798] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[66047.629429] PM: Syncing filesystems ... done.
>[66047.860081] PM: Preparing system for mem sleep
>[66048.016927] r8169 0000:02:00.0 em1: link up
>[66048.016938] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[66048.167118] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[66048.201334] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[66048.212355] PM: Entering mem sleep
>[66048.212383] Suspending console(s) (use no_console_suspend to debug)
>[66048.212866] r8712: suspending...
>[66048.212986] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[66048.223417] sd 0:0:0:0: [sda] Stopping disk
>[66048.253414] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[66048.253448] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[66048.253557] serial 00:06: disabled
>[66048.253650] serial 00:05: disabled
>[66048.254138] ACPI handle has no context!
>[66049.116112] PM: suspend of devices complete after 903.689 msecs
>[66049.116333] PM: late suspend of devices complete after 0.218 msecs
>[66049.116495] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[66049.127114] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[66049.127204] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[66049.138077] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[66049.138100] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[66049.138130] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[66049.149074] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[66049.149097] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[66049.149177] PM: noirq suspend of devices complete after 32.846 msecs
>[66049.149217] ACPI: Preparing to enter system sleep state S3
>[66049.157258] PM: Saving platform NVS memory
>[66049.157445] Disabling non-boot CPUs ...
>[66049.157779] Broke affinity for irq 16
>[66049.157785] Broke affinity for irq 17
>[66049.157791] Broke affinity for irq 19
>[66049.157797] Broke affinity for irq 22
>[66049.158855] smpboot: CPU 1 is now offline
>[66049.159119] CPU 1 offline: Remove Rx thread
>[66049.160498] smpboot: CPU 2 is now offline
>[66049.160776] CPU 2 offline: Remove Rx thread
>[66049.161148] ACPI: Low-level resume complete
>[66049.161183] PM: Restoring platform NVS memory
>[66049.161245] PCI-DMA: Resuming GART IOMMU
>[66049.161246] PCI-DMA: Restoring GART aperture settings
>[66049.161494] LVT offset 0 assigned for vector 0xf9
>[66049.161500] microcode: CPU0: new patch_level=0x010000db
>[66049.161506] Enabling non-boot CPUs ...
>[66049.161600] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[66049.172634] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[66049.172635] perf: IBS APIC setup failed on cpu #1
>[66049.174983] microcode: CPU1: new patch_level=0x010000db
>[66049.174991] bnx2i: CPU 1 online: Create Rx thread
>[66049.175134] CPU1 is up
>[66049.175173] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[66049.186208] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[66049.186210] perf: IBS APIC setup failed on cpu #2
>[66049.188511] microcode: CPU2: new patch_level=0x010000db
>[66049.188518] bnx2i: CPU 2 online: Create Rx thread
>[66049.188655] CPU2 is up
>[66049.189137] ACPI: Waking up from system sleep state S3
>[66049.215629] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[66049.215651] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[66049.226608] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[66049.226636] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[66049.226658] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[66049.237606] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[66049.248660] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[66049.292714] PM: noirq resume of devices complete after 87.979 msecs
>[66049.292884] PM: early resume of devices complete after 0.141 msecs
>[66049.293172] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[66049.293220] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[66049.294424] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[66049.294425] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[66049.295052] serial 00:05: activated
>[66049.295413] serial 00:06: activated
>[66049.295448] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[66049.308568] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[66049.308623] radeon 0000:01:00.0: WB enabled
>[66049.308626] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[66049.354756] [drm] ring test on 0 succeeded in 1 usecs
>[66049.354772] [drm] ib test on ring 0 succeeded in 0 usecs
>[66049.362814] r8169 0000:02:00.0 em1: link down
>[66049.508926] r8712: resuming...
>[66049.536525] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[66049.600532] ata6: SATA link down (SStatus 0 SControl 300)
>[66049.610537] ata3: SATA link down (SStatus 0 SControl 300)
>[66049.610572] ata5: SATA link down (SStatus 0 SControl 300)
>[66049.610607] ata4: SATA link down (SStatus 0 SControl 300)
>[66049.765487] ata2: softreset failed (device not ready)
>[66049.765489] ata2: applying PMP SRST workaround and retrying
>[66049.855494] firewire_core 0000:03:00.0: rediscovered device fw0
>[66049.920469] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[66049.926883] ata2.00: configured for UDMA/100
>[66050.971533] r8169 0000:02:00.0 em1: link up
>[66057.659250] ata1: softreset failed (device not ready)
>[66057.659252] ata1: applying PMP SRST workaround and retrying
>[66057.814237] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[66057.839813] ata1.00: configured for UDMA/133
>[66057.839890] sd 0:0:0:0: [sda] Starting disk
>[66057.863499] PM: resume of devices complete after 8571.950 msecs
>[66057.863945] PM: Finishing wakeup.
>[66057.863946] Restarting tasks ... done.
>[66060.663616] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[81479.930090] usb 2-1: USB disconnect, device number 2
>[81479.937957] sd 7:0:0:0: [sdb] Unhandled error code
>[81479.937965] sd 7:0:0:0: [sdb]  
>[81479.937970] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
>[81479.937976] sd 7:0:0:0: [sdb] CDB: 
>[81479.937979] Read(10): 28 00 00 1e a5 a0 00 00 01 00
>[81479.937998] end_request: I/O error, dev sdb, sector 2008480
>[81479.938072] sd 7:0:0:0: [sdb] Unhandled error code
>[81479.938078] sd 7:0:0:0: [sdb]  
>[81479.938082] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
>[81479.938087] sd 7:0:0:0: [sdb] CDB: 
>[81479.938090] Read(10): 28 00 00 1e a5 a1 00 00 01 00
>[81479.938104] end_request: I/O error, dev sdb, sector 2008481
>[81479.938249] FAT-fs (sdb1): Directory bread(block 2006432) failed
>[81479.938284] FAT-fs (sdb1): Directory bread(block 2006433) failed
>[81479.938306] FAT-fs (sdb1): Directory bread(block 2006434) failed
>[81479.938327] FAT-fs (sdb1): Directory bread(block 2006435) failed
>[81479.938347] FAT-fs (sdb1): Directory bread(block 2006436) failed
>[81479.938367] FAT-fs (sdb1): Directory bread(block 2006437) failed
>[81479.938387] FAT-fs (sdb1): Directory bread(block 2006438) failed
>[81479.938407] FAT-fs (sdb1): Directory bread(block 2006439) failed
>[81479.938427] FAT-fs (sdb1): Directory bread(block 2006440) failed
>[81479.938447] FAT-fs (sdb1): Directory bread(block 2006441) failed
>[81484.938123] fat__get_entry: 3792662 callbacks suppressed
>[81484.938129] FAT-fs (sdb1): Directory bread(block 2635904) failed
>[81484.938132] FAT-fs (sdb1): Directory bread(block 2635905) failed
>[81484.938134] FAT-fs (sdb1): Directory bread(block 2635906) failed
>[81484.938136] FAT-fs (sdb1): Directory bread(block 2635907) failed
>[81484.938138] FAT-fs (sdb1): Directory bread(block 2635908) failed
>[81484.938140] FAT-fs (sdb1): Directory bread(block 2635909) failed
>[81484.938141] FAT-fs (sdb1): Directory bread(block 2635910) failed
>[81484.938143] FAT-fs (sdb1): Directory bread(block 2635911) failed
>[81484.938145] FAT-fs (sdb1): Directory bread(block 2635912) failed
>[81484.938147] FAT-fs (sdb1): Directory bread(block 2635913) failed
>[81489.938321] fat__get_entry: 4363517 callbacks suppressed
>[81489.938327] FAT-fs (sdb1): Directory bread(block 583463) failed
>[81489.938330] FAT-fs (sdb1): Directory bread(block 583464) failed
>[81489.938332] FAT-fs (sdb1): Directory bread(block 583465) failed
>[81489.938334] FAT-fs (sdb1): Directory bread(block 583466) failed
>[81489.938336] FAT-fs (sdb1): Directory bread(block 583467) failed
>[81489.938338] FAT-fs (sdb1): Directory bread(block 583468) failed
>[81489.938340] FAT-fs (sdb1): Directory bread(block 583469) failed
>[81489.938342] FAT-fs (sdb1): Directory bread(block 583470) failed
>[81489.938344] FAT-fs (sdb1): Directory bread(block 583471) failed
>[81489.938346] FAT-fs (sdb1): Directory bread(block 583472) failed
>[81498.706045] usb 2-1: new high-speed USB device number 8 using ehci_hcd
>[81498.822691] usb 2-1: New USB device found, idVendor=05e3, idProduct=0718
>[81498.822703] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
>[81498.822710] usb 2-1: Product: USB Storage
>[81498.822716] usb 2-1: SerialNumber: 000000000033
>[81498.826454] scsi11 : usb-storage 2-1:1.0
>[81499.838701] scsi 11:0:0:0: Direct-Access     SAMSUNG  HM250HI          0041 PQ: 0 ANSI: 0
>[81499.841223] sd 11:0:0:0: Attached scsi generic sg2 type 0
>[81499.841915] sd 11:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>[81499.845533] sd 11:0:0:0: [sdb] Write Protect is off
>[81499.845547] sd 11:0:0:0: [sdb] Mode Sense: 03 00 00 00
>[81499.846509] sd 11:0:0:0: [sdb] No Caching mode page present
>[81499.846518] sd 11:0:0:0: [sdb] Assuming drive cache: write through
>[81499.850132] sd 11:0:0:0: [sdb] No Caching mode page present
>[81499.850144] sd 11:0:0:0: [sdb] Assuming drive cache: write through
>[81499.871257]  sdb: sdb1
>[81499.874989] sd 11:0:0:0: [sdb] No Caching mode page present
>[81499.874994] sd 11:0:0:0: [sdb] Assuming drive cache: write through
>[81499.874997] sd 11:0:0:0: [sdb] Attached SCSI disk
>[81778.563505] usb 2-1: USB disconnect, device number 8
>[81809.304737] r8169 0000:02:00.0 em1: link down
>[81809.304766] r8169 0000:02:00.0 em1: link down
>[81809.304899] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[81810.948448] r8169 0000:02:00.0 em1: link up
>[81810.948470] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[81811.418626] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[81811.441276] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[81812.153520] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[81812.370272] r8169 0000:02:00.0 em1: link down
>[81812.370430] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[81812.370631] r8169 0000:02:00.0 em1: link down
>[81812.782543] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[81812.941184] r8169 0000:02:00.0 em1: link down
>[81812.941348] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[81813.364251] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[81813.537067] r8169 0000:02:00.0 em1: link down
>[81813.537114] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[81814.088384] PM: Syncing filesystems ... done.
>[81814.202742] PM: Preparing system for mem sleep
>[81814.375404] Freezing user space processes ... (elapsed 0.05 seconds) done.
>[81814.430773] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[81814.441769] PM: Entering mem sleep
>[81814.441796] Suspending console(s) (use no_console_suspend to debug)
>[81814.442250] r8712: suspending...
>[81814.442355] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[81814.442508] sd 0:0:0:0: [sda] Stopping disk
>[81814.478811] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[81814.478845] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[81814.478949] serial 00:06: disabled
>[81814.479080] serial 00:05: disabled
>[81814.480702] ACPI handle has no context!
>[81815.332542] PM: suspend of devices complete after 890.710 msecs
>[81815.332758] PM: late suspend of devices complete after 0.213 msecs
>[81815.332919] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[81815.343568] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[81815.343659] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[81815.354531] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[81815.354554] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[81815.354584] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[81815.365528] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[81815.365551] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[81815.365631] PM: noirq suspend of devices complete after 32.874 msecs
>[81815.365669] ACPI: Preparing to enter system sleep state S3
>[81815.373711] PM: Saving platform NVS memory
>[81815.373891] Disabling non-boot CPUs ...
>[81815.374245] Broke affinity for irq 16
>[81815.374251] Broke affinity for irq 17
>[81815.375312] smpboot: CPU 1 is now offline
>[81815.375587] CPU 1 offline: Remove Rx thread
>[81815.376021] Broke affinity for irq 19
>[81815.377051] smpboot: CPU 2 is now offline
>[81815.377285] CPU 2 offline: Remove Rx thread
>[81815.377660] ACPI: Low-level resume complete
>[81815.377695] PM: Restoring platform NVS memory
>[81815.377756] PCI-DMA: Resuming GART IOMMU
>[81815.377756] PCI-DMA: Restoring GART aperture settings
>[81815.378004] LVT offset 0 assigned for vector 0xf9
>[81815.378010] microcode: CPU0: new patch_level=0x010000db
>[81815.378045] Enabling non-boot CPUs ...
>[81815.378108] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[81815.389143] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[81815.389144] perf: IBS APIC setup failed on cpu #1
>[81815.391523] microcode: CPU1: new patch_level=0x010000db
>[81815.391530] bnx2i: CPU 1 online: Create Rx thread
>[81815.391577] CPU1 is up
>[81815.391616] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[81815.402650] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[81815.402651] perf: IBS APIC setup failed on cpu #2
>[81815.404979] microcode: CPU2: new patch_level=0x010000db
>[81815.404986] bnx2i: CPU 2 online: Create Rx thread
>[81815.405043] CPU2 is up
>[81815.405519] ACPI: Waking up from system sleep state S3
>[81815.432081] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[81815.432104] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[81815.443060] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[81815.443087] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[81815.443109] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[81815.454058] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[81815.465115] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[81815.509165] PM: noirq resume of devices complete after 87.975 msecs
>[81815.509331] PM: early resume of devices complete after 0.138 msecs
>[81815.509627] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[81815.509656] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[81815.510879] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[81815.510880] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[81815.511510] serial 00:05: activated
>[81815.511873] serial 00:06: activated
>[81815.511908] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[81815.522924] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[81815.523000] radeon 0000:01:00.0: WB enabled
>[81815.523003] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[81815.569113] [drm] ring test on 0 succeeded in 1 usecs
>[81815.569130] [drm] ib test on ring 0 succeeded in 0 usecs
>[81815.580246] r8169 0000:02:00.0 em1: link down
>[81815.725833] r8712: resuming...
>[81815.752978] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[81815.816992] ata6: SATA link down (SStatus 0 SControl 300)
>[81815.817027] ata4: SATA link down (SStatus 0 SControl 300)
>[81815.817070] ata3: SATA link down (SStatus 0 SControl 300)
>[81815.817099] ata5: SATA link down (SStatus 0 SControl 300)
>[81815.971935] ata2: softreset failed (device not ready)
>[81815.971938] ata2: applying PMP SRST workaround and retrying
>[81816.065937] firewire_core 0000:03:00.0: rediscovered device fw0
>[81816.126929] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[81816.133068] ata2.00: configured for UDMA/100
>[81817.198644] r8169 0000:02:00.0 em1: link up
>[81817.198652] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[81823.875726] ata1: softreset failed (device not ready)
>[81823.875729] ata1: applying PMP SRST workaround and retrying
>[81824.030697] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[81824.055726] ata1.00: configured for UDMA/133
>[81824.055804] sd 0:0:0:0: [sda] Starting disk
>[81824.079585] PM: resume of devices complete after 8571.588 msecs
>[81824.080028] PM: Finishing wakeup.
>[81824.080030] Restarting tasks ... done.
>[81826.489480] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[86119.778055] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[86120.109004] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[86120.253762] r8169 0000:02:00.0 em1: link down
>[86120.253793] r8169 0000:02:00.0 em1: link down
>[86120.253926] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[86120.337735] r8169 0000:02:00.0 em1: link down
>[86120.337780] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[86120.752887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[86120.921705] r8169 0000:02:00.0 em1: link down
>[86120.921788] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[86121.394427] PM: Syncing filesystems ... done.
>[86121.407800] PM: Preparing system for mem sleep
>[86121.670375] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[86121.682381] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[86121.693365] PM: Entering mem sleep
>[86121.693392] Suspending console(s) (use no_console_suspend to debug)
>[86121.693846] r8712: suspending...
>[86121.693955] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[86121.694112] sd 0:0:0:0: [sda] Stopping disk
>[86121.731162] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[86121.731241] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[86121.731343] serial 00:06: disabled
>[86121.731431] serial 00:05: disabled
>[86121.733270] ACPI handle has no context!
>[86122.601154] PM: suspend of devices complete after 907.727 msecs
>[86122.601371] PM: late suspend of devices complete after 0.213 msecs
>[86122.601530] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[86122.612169] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[86122.612258] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[86122.623125] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[86122.623147] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[86122.623177] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[86122.634123] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[86122.634145] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[86122.634226] PM: noirq suspend of devices complete after 32.857 msecs
>[86122.634264] ACPI: Preparing to enter system sleep state S3
>[86122.642307] PM: Saving platform NVS memory
>[86122.642500] Disabling non-boot CPUs ...
>[86122.642852] Broke affinity for irq 16
>[86122.642859] Broke affinity for irq 17
>[86122.642865] Broke affinity for irq 22
>[86122.643917] smpboot: CPU 1 is now offline
>[86122.644222] CPU 1 offline: Remove Rx thread
>[86122.645630] smpboot: CPU 2 is now offline
>[86122.645925] CPU 2 offline: Remove Rx thread
>[86122.646300] ACPI: Low-level resume complete
>[86122.646335] PM: Restoring platform NVS memory
>[86122.646394] PCI-DMA: Resuming GART IOMMU
>[86122.646394] PCI-DMA: Restoring GART aperture settings
>[86122.646643] LVT offset 0 assigned for vector 0xf9
>[86122.646649] microcode: CPU0: new patch_level=0x010000db
>[86122.646655] Enabling non-boot CPUs ...
>[86122.646737] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[86122.657771] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[86122.657773] perf: IBS APIC setup failed on cpu #1
>[86122.660148] microcode: CPU1: new patch_level=0x010000db
>[86122.660156] bnx2i: CPU 1 online: Create Rx thread
>[86122.660205] CPU1 is up
>[86122.660242] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[86122.671276] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[86122.671277] perf: IBS APIC setup failed on cpu #2
>[86122.673641] microcode: CPU2: new patch_level=0x010000db
>[86122.673648] bnx2i: CPU 2 online: Create Rx thread
>[86122.673695] CPU2 is up
>[86122.674181] ACPI: Waking up from system sleep state S3
>[86122.701673] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[86122.701696] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[86122.712652] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[86122.712681] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[86122.712703] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[86122.723649] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[86122.734702] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[86122.778751] PM: noirq resume of devices complete after 87.967 msecs
>[86122.778918] PM: early resume of devices complete after 0.137 msecs
>[86122.779247] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[86122.779316] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[86122.779667] serial 00:05: activated
>[86122.780097] serial 00:06: activated
>[86122.780134] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[86122.780552] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[86122.780553] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[86122.792513] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[86122.792589] radeon 0000:01:00.0: WB enabled
>[86122.792592] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[86122.838701] [drm] ring test on 0 succeeded in 1 usecs
>[86122.838717] [drm] ib test on ring 0 succeeded in 0 usecs
>[86122.849846] r8169 0000:02:00.0 em1: link down
>[86122.995844] r8712: resuming...
>[86123.022571] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[86123.084592] ata6: SATA link down (SStatus 0 SControl 300)
>[86123.084627] ata4: SATA link down (SStatus 0 SControl 300)
>[86123.084656] ata3: SATA link down (SStatus 0 SControl 300)
>[86123.086577] ata5: SATA link down (SStatus 0 SControl 300)
>[86123.239529] ata2: softreset failed (device not ready)
>[86123.239531] ata2: applying PMP SRST workaround and retrying
>[86123.333532] firewire_core 0000:03:00.0: rediscovered device fw0
>[86123.394516] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[86123.400641] ata2.00: configured for UDMA/100
>[86124.436697] r8169 0000:02:00.0 em1: link up
>[86124.436704] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[86131.194288] ata1: softreset failed (device not ready)
>[86131.194290] ata1: applying PMP SRST workaround and retrying
>[86131.349275] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[86131.377020] ata1.00: configured for UDMA/133
>[86131.377108] sd 0:0:0:0: [sda] Starting disk
>[86131.400757] PM: resume of devices complete after 8623.184 msecs
>[86131.401203] PM: Finishing wakeup.
>[86131.401204] Restarting tasks ... done.
>[86133.755078] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[107117.963766] r8169 0000:02:00.0 em1: link down
>[107117.963785] r8169 0000:02:00.0 em1: link down
>[107117.963922] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[107119.543937] r8169 0000:02:00.0 em1: link up
>[107119.543958] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[107120.080086] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[107120.096222] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[107120.791985] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[107120.968798] r8169 0000:02:00.0 em1: link down
>[107120.968944] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[107120.969151] r8169 0000:02:00.0 em1: link down
>[107121.363953] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[107121.540702] r8169 0000:02:00.0 em1: link down
>[107121.540749] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[107121.937699] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[107122.057628] r8169 0000:02:00.0 em1: link down
>[107122.057674] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[107122.380560] PM: Syncing filesystems ... done.
>[107122.731572] PM: Preparing system for mem sleep
>[107122.897128] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[107122.909331] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[107122.920333] PM: Entering mem sleep
>[107122.920361] Suspending console(s) (use no_console_suspend to debug)
>[107122.920756] r8712: suspending...
>[107122.920923] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[107122.939147] sd 0:0:0:0: [sda] Stopping disk
>[107122.956740] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[107122.956773] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[107122.956936] serial 00:06: disabled
>[107122.957025] serial 00:05: disabled
>[107122.958255] ACPI handle has no context!
>[107123.970099] PM: suspend of devices complete after 1049.727 msecs
>[107123.970315] PM: late suspend of devices complete after 0.212 msecs
>[107123.970473] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[107123.981108] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[107123.981200] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[107123.992066] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[107123.992088] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[107123.992119] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[107124.003064] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[107124.003087] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[107124.003167] PM: noirq suspend of devices complete after 32.854 msecs
>[107124.003205] ACPI: Preparing to enter system sleep state S3
>[107124.011248] PM: Saving platform NVS memory
>[107124.011464] Disabling non-boot CPUs ...
>[107124.011815] Broke affinity for irq 16
>[107124.011821] Broke affinity for irq 17
>[107124.011828] Broke affinity for irq 22
>[107124.012869] smpboot: CPU 1 is now offline
>[107124.013122] CPU 1 offline: Remove Rx thread
>[107124.014528] smpboot: CPU 2 is now offline
>[107124.014795] CPU 2 offline: Remove Rx thread
>[107124.015160] ACPI: Low-level resume complete
>[107124.015195] PM: Restoring platform NVS memory
>[107124.015255] PCI-DMA: Resuming GART IOMMU
>[107124.015255] PCI-DMA: Restoring GART aperture settings
>[107124.015504] LVT offset 0 assigned for vector 0xf9
>[107124.015511] microcode: CPU0: new patch_level=0x010000db
>[107124.015517] Enabling non-boot CPUs ...
>[107124.015730] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[107124.026765] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[107124.026766] perf: IBS APIC setup failed on cpu #1
>[107124.029141] microcode: CPU1: new patch_level=0x010000db
>[107124.029148] bnx2i: CPU 1 online: Create Rx thread
>[107124.029196] CPU1 is up
>[107124.029236] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[107124.040270] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[107124.040272] perf: IBS APIC setup failed on cpu #2
>[107124.042606] microcode: CPU2: new patch_level=0x010000db
>[107124.042613] bnx2i: CPU 2 online: Create Rx thread
>[107124.042661] CPU2 is up
>[107124.043157] ACPI: Waking up from system sleep state S3
>[107124.070613] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[107124.070636] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[107124.081593] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[107124.081621] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[107124.081643] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[107124.092591] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[107124.103643] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[107124.147694] PM: noirq resume of devices complete after 87.968 msecs
>[107124.147866] PM: early resume of devices complete after 0.138 msecs
>[107124.148590] serial 00:05: activated
>[107124.148640] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[107124.148699] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[107124.149029] serial 00:06: activated
>[107124.149065] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[107124.149469] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[107124.149470] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[107124.161534] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[107124.161593] radeon 0000:01:00.0: WB enabled
>[107124.161595] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[107124.207704] [drm] ring test on 0 succeeded in 1 usecs
>[107124.207721] [drm] ib test on ring 0 succeeded in 0 usecs
>[107124.219781] r8169 0000:02:00.0 em1: link down
>[107124.365397] r8712: resuming...
>[107124.392515] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[107124.453508] ata4: SATA link down (SStatus 0 SControl 300)
>[107124.455505] ata5: SATA link down (SStatus 0 SControl 300)
>[107124.460532] ata3: SATA link down (SStatus 0 SControl 300)
>[107124.460567] ata6: SATA link down (SStatus 0 SControl 300)
>[107124.615471] ata2: softreset failed (device not ready)
>[107124.615474] ata2: applying PMP SRST workaround and retrying
>[107124.702475] firewire_core 0000:03:00.0: rediscovered device fw0
>[107124.770458] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[107124.776608] ata2.00: configured for UDMA/100
>[107125.806163] r8169 0000:02:00.0 em1: link up
>[107125.806171] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[107132.570229] ata1: softreset failed (device not ready)
>[107132.570232] ata1: applying PMP SRST workaround and retrying
>[107132.725228] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[107132.749567] ata1.00: configured for UDMA/133
>[107132.749643] sd 0:0:0:0: [sda] Starting disk
>[107132.773299] PM: resume of devices complete after 8626.776 msecs
>[107132.773746] PM: Finishing wakeup.
>[107132.773747] Restarting tasks ... done.
>[107135.565227] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[107352.208152] ata1.00: exception Emask 0x50 SAct 0x1 SErr 0x400800 action 0x6 frozen
>[107352.208163] ata1.00: irq_stat 0x08000000, interface fatal error
>[107352.208171] ata1: SError: { HostInt Handshk }
>[107352.208179] ata1.00: failed command: WRITE FPDMA QUEUED
>[107352.208192] ata1.00: cmd 61/58:00:08:da:61/00:00:29:00:00/40 tag 0 ncq 45056 out
>         res 40/00:04:08:da:61/00:00:29:00:00/40 Emask 0x50 (ATA bus error)
>[107352.208200] ata1.00: status: { DRDY }
>[107352.208210] ata1: hard resetting link
>[107352.667775] ata1: softreset failed (device not ready)
>[107352.667787] ata1: applying PMP SRST workaround and retrying
>[107352.822725] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[107352.824387] ata1.00: configured for UDMA/133
>[107352.824418] ata1: EH complete
>[107530.461768] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[107530.793376] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[107530.929137] r8169 0000:02:00.0 em1: link down
>[107530.929227] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[107530.929635] r8169 0000:02:00.0 em1: link down
>[107531.020172] r8169 0000:02:00.0 em1: link down
>[107531.020220] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[107531.437712] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[107531.600652] r8169 0000:02:00.0 em1: link down
>[107531.600736] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[107532.173793] PM: Syncing filesystems ... done.
>[107532.175380] PM: Preparing system for mem sleep
>[107532.227398] Freezing user space processes ... (elapsed 0.12 seconds) done.
>[107532.349877] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[107532.360877] PM: Entering mem sleep
>[107532.360903] Suspending console(s) (use no_console_suspend to debug)
>[107532.361277] r8712: suspending...
>[107532.361422] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[107532.361581] sd 0:0:0:0: [sda] Stopping disk
>[107532.396552] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[107532.396585] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[107532.396690] serial 00:06: disabled
>[107532.396787] serial 00:05: disabled
>[107532.398824] ACPI handle has no context!
>[107533.297293] PM: suspend of devices complete after 935.725 msecs
>[107533.297509] PM: late suspend of devices complete after 0.212 msecs
>[107533.297672] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[107533.308314] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[107533.308404] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[107533.319280] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[107533.319303] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[107533.319332] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[107533.330281] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[107533.330303] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[107533.330384] PM: noirq suspend of devices complete after 32.869 msecs
>[107533.330422] ACPI: Preparing to enter system sleep state S3
>[107533.338471] PM: Saving platform NVS memory
>[107533.338659] Disabling non-boot CPUs ...
>[107533.338983] Broke affinity for irq 16
>[107533.338990] Broke affinity for irq 22
>[107533.340055] smpboot: CPU 1 is now offline
>[107533.340333] CPU 1 offline: Remove Rx thread
>[107533.340759] Broke affinity for irq 17
>[107533.341798] smpboot: CPU 2 is now offline
>[107533.342001] CPU 2 offline: Remove Rx thread
>[107533.342360] ACPI: Low-level resume complete
>[107533.342395] PM: Restoring platform NVS memory
>[107533.342456] PCI-DMA: Resuming GART IOMMU
>[107533.342457] PCI-DMA: Restoring GART aperture settings
>[107533.342705] LVT offset 0 assigned for vector 0xf9
>[107533.342711] microcode: CPU0: new patch_level=0x010000db
>[107533.342717] Enabling non-boot CPUs ...
>[107533.342805] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[107533.353839] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[107533.353841] perf: IBS APIC setup failed on cpu #1
>[107533.356224] microcode: CPU1: new patch_level=0x010000db
>[107533.356232] bnx2i: CPU 1 online: Create Rx thread
>[107533.356280] CPU1 is up
>[107533.356319] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[107533.367353] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[107533.367354] perf: IBS APIC setup failed on cpu #2
>[107533.369685] microcode: CPU2: new patch_level=0x010000db
>[107533.369692] bnx2i: CPU 2 online: Create Rx thread
>[107533.369742] CPU2 is up
>[107533.370250] ACPI: Waking up from system sleep state S3
>[107533.397862] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[107533.397885] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[107533.408847] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[107533.408875] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[107533.408897] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[107533.419851] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[107533.430909] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[107533.474982] PM: noirq resume of devices complete after 87.968 msecs
>[107533.475149] PM: early resume of devices complete after 0.138 msecs
>[107533.475401] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[107533.475450] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[107533.475985] serial 00:05: activated
>[107533.476401] serial 00:06: activated
>[107533.476439] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[107533.476693] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[107533.476694] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[107533.490352] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[107533.490411] radeon 0000:01:00.0: WB enabled
>[107533.490414] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[107533.536540] [drm] ring test on 0 succeeded in 1 usecs
>[107533.536556] [drm] ib test on ring 0 succeeded in 0 usecs
>[107533.548107] r8169 0000:02:00.0 em1: link down
>[107533.590705] r8712: resuming...
>[107533.780968] ata6: SATA link down (SStatus 0 SControl 300)
>[107533.781024] ata4: SATA link down (SStatus 0 SControl 300)
>[107533.781058] ata5: SATA link down (SStatus 0 SControl 300)
>[107533.781086] ata3: SATA link down (SStatus 0 SControl 300)
>[107533.935999] ata2: softreset failed (device not ready)
>[107533.936001] ata2: applying PMP SRST workaround and retrying
>[107534.037041] firewire_core 0000:03:00.0: rediscovered device fw0
>[107534.091051] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[107534.097196] ata2.00: configured for UDMA/100
>[107535.143277] r8169 0000:02:00.0 em1: link up
>[107535.143284] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[107541.843200] ata1: softreset failed (device not ready)
>[107541.843203] ata1: applying PMP SRST workaround and retrying
>[107541.998193] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[107542.020125] ata1.00: configured for UDMA/133
>[107542.020205] sd 0:0:0:0: [sda] Starting disk
>[107542.043745] PM: resume of devices complete after 8568.247 msecs
>[107542.044202] PM: Finishing wakeup.
>[107542.044203] Restarting tasks ... done.
>[107544.445093] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[121237.327878] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[121237.655902] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[121237.808621] r8169 0000:02:00.0 em1: link down
>[121237.808660] r8169 0000:02:00.0 em1: link down
>[121237.808774] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[121237.895682] r8169 0000:02:00.0 em1: link down
>[121237.895980] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[121237.897151] r8169 0000:02:00.0 em1: link down
>[121238.319036] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[121238.488531] r8169 0000:02:00.0 em1: link down
>[121238.488582] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[121239.032371] PM: Syncing filesystems ... done.
>[121239.045191] PM: Preparing system for mem sleep
>[121239.308900] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[121239.320237] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[121239.331222] PM: Entering mem sleep
>[121239.331248] Suspending console(s) (use no_console_suspend to debug)
>[121239.331657] r8712: suspending...
>[121239.331792] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[121239.331935] sd 0:0:0:0: [sda] Stopping disk
>[121239.369453] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[121239.369489] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[121239.369596] serial 00:06: disabled
>[121239.369685] serial 00:05: disabled
>[121239.371134] ACPI handle has no context!
>[121240.236997] PM: suspend of devices complete after 905.720 msecs
>[121240.237212] PM: late suspend of devices complete after 0.212 msecs
>[121240.237373] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[121240.248036] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[121240.248126] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[121240.258977] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[121240.258999] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[121240.259029] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[121240.269975] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[121240.269997] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[121240.270078] PM: noirq suspend of devices complete after 32.865 msecs
>[121240.270116] ACPI: Preparing to enter system sleep state S3
>[121240.278160] PM: Saving platform NVS memory
>[121240.278359] Disabling non-boot CPUs ...
>[121240.278712] Broke affinity for irq 16
>[121240.279758] smpboot: CPU 1 is now offline
>[121240.280029] CPU 1 offline: Remove Rx thread
>[121240.280446] Broke affinity for irq 17
>[121240.280453] Broke affinity for irq 22
>[121240.281481] smpboot: CPU 2 is now offline
>[121240.281731] CPU 2 offline: Remove Rx thread
>[121240.282097] ACPI: Low-level resume complete
>[121240.282132] PM: Restoring platform NVS memory
>[121240.282193] PCI-DMA: Resuming GART IOMMU
>[121240.282193] PCI-DMA: Restoring GART aperture settings
>[121240.282442] LVT offset 0 assigned for vector 0xf9
>[121240.282448] microcode: CPU0: new patch_level=0x010000db
>[121240.282483] Enabling non-boot CPUs ...
>[121240.282548] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[121240.293583] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[121240.293584] perf: IBS APIC setup failed on cpu #1
>[121240.295966] microcode: CPU1: new patch_level=0x010000db
>[121240.295974] bnx2i: CPU 1 online: Create Rx thread
>[121240.296020] CPU1 is up
>[121240.296059] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[121240.307093] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[121240.307094] perf: IBS APIC setup failed on cpu #2
>[121240.309423] microcode: CPU2: new patch_level=0x010000db
>[121240.309430] bnx2i: CPU 2 online: Create Rx thread
>[121240.309493] CPU2 is up
>[121240.309977] ACPI: Waking up from system sleep state S3
>[121240.335532] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[121240.335555] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[121240.346511] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[121240.346538] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[121240.346560] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[121240.357507] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[121240.368564] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[121240.412615] PM: noirq resume of devices complete after 87.972 msecs
>[121240.412781] PM: early resume of devices complete after 0.138 msecs
>[121240.413063] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[121240.413107] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[121240.414329] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[121240.414330] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[121240.414974] serial 00:05: activated
>[121240.415349] serial 00:06: activated
>[121240.415385] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[121240.428080] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[121240.428138] radeon 0000:01:00.0: WB enabled
>[121240.428141] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[121240.474268] [drm] ring test on 0 succeeded in 1 usecs
>[121240.474284] [drm] ib test on ring 0 succeeded in 0 usecs
>[121240.486697] r8169 0000:02:00.0 em1: link down
>[121240.628841] r8712: resuming...
>[121240.656428] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[121240.720439] ata4: SATA link down (SStatus 0 SControl 300)
>[121240.720474] ata3: SATA link down (SStatus 0 SControl 300)
>[121240.720509] ata5: SATA link down (SStatus 0 SControl 300)
>[121240.720539] ata6: SATA link down (SStatus 0 SControl 300)
>[121240.872388] ata2: softreset failed (device not ready)
>[121240.872390] ata2: applying PMP SRST workaround and retrying
>[121240.974387] firewire_core 0000:03:00.0: rediscovered device fw0
>[121241.027376] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[121241.033531] ata2.00: configured for UDMA/100
>[121242.091430] r8169 0000:02:00.0 em1: link up
>[121242.091438] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[121248.776154] ata1: softreset failed (device not ready)
>[121248.776157] ata1: applying PMP SRST workaround and retrying
>[121248.931144] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[121248.954318] ata1.00: configured for UDMA/133
>[121248.954396] sd 0:0:0:0: [sda] Starting disk
>[121248.978181] PM: resume of devices complete after 8566.734 msecs
>[121248.978624] PM: Finishing wakeup.
>[121248.978626] Restarting tasks ... done.
>[121251.490878] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[125364.214466] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[125364.546356] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[125364.684181] r8169 0000:02:00.0 em1: link down
>[125364.684210] r8169 0000:02:00.0 em1: link down
>[125364.684250] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[125364.772196] r8169 0000:02:00.0 em1: link down
>[125364.772243] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[125365.193473] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[125365.365135] r8169 0000:02:00.0 em1: link down
>[125365.365439] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[125365.785643] PM: Syncing filesystems ... done.
>[125365.797901] PM: Preparing system for mem sleep
>[125366.054412] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[125366.065801] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[125366.076795] PM: Entering mem sleep
>[125366.076822] Suspending console(s) (use no_console_suspend to debug)
>[125366.077266] r8712: suspending...
>[125366.077382] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[125366.077534] sd 0:0:0:0: [sda] Stopping disk
>[125366.112544] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[125366.112578] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[125366.112683] serial 00:06: disabled
>[125366.112834] serial 00:05: disabled
>[125366.114711] ACPI handle has no context!
>[125366.964576] PM: suspend of devices complete after 887.717 msecs
>[125366.964792] PM: late suspend of devices complete after 0.212 msecs
>[125366.964952] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[125366.975601] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[125366.975691] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[125366.986560] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[125366.986583] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[125366.986613] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[125366.997559] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[125366.997581] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[125366.997662] PM: noirq suspend of devices complete after 32.871 msecs
>[125366.997700] ACPI: Preparing to enter system sleep state S3
>[125367.005744] PM: Saving platform NVS memory
>[125367.005934] Disabling non-boot CPUs ...
>[125367.006283] Broke affinity for irq 16
>[125367.007326] smpboot: CPU 1 is now offline
>[125367.007615] CPU 1 offline: Remove Rx thread
>[125367.008001] Broke affinity for irq 17
>[125367.008007] Broke affinity for irq 22
>[125367.009036] smpboot: CPU 2 is now offline
>[125367.009366] CPU 2 offline: Remove Rx thread
>[125367.009750] ACPI: Low-level resume complete
>[125367.009786] PM: Restoring platform NVS memory
>[125367.009846] PCI-DMA: Resuming GART IOMMU
>[125367.009847] PCI-DMA: Restoring GART aperture settings
>[125367.010096] LVT offset 0 assigned for vector 0xf9
>[125367.010102] microcode: CPU0: new patch_level=0x010000db
>[125367.010108] Enabling non-boot CPUs ...
>[125367.010189] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[125367.021224] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[125367.021225] perf: IBS APIC setup failed on cpu #1
>[125367.023609] microcode: CPU1: new patch_level=0x010000db
>[125367.023617] bnx2i: CPU 1 online: Create Rx thread
>[125367.023665] CPU1 is up
>[125367.023702] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[125367.034736] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[125367.034738] perf: IBS APIC setup failed on cpu #2
>[125367.037079] microcode: CPU2: new patch_level=0x010000db
>[125367.037086] bnx2i: CPU 2 online: Create Rx thread
>[125367.037134] CPU2 is up
>[125367.037621] ACPI: Waking up from system sleep state S3
>[125367.065111] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[125367.065134] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[125367.076090] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[125367.076118] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[125367.076140] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[125367.087089] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[125367.098141] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[125367.142192] PM: noirq resume of devices complete after 87.971 msecs
>[125367.142358] PM: early resume of devices complete after 0.138 msecs
>[125367.142679] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[125367.142745] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[125367.143098] serial 00:05: activated
>[125367.143527] serial 00:06: activated
>[125367.143562] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[125367.143984] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[125367.143985] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[125367.157629] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[125367.157687] radeon 0000:01:00.0: WB enabled
>[125367.157689] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[125367.203820] [drm] ring test on 0 succeeded in 1 usecs
>[125367.203841] [drm] ib test on ring 0 succeeded in 0 usecs
>[125367.215277] r8169 0000:02:00.0 em1: link down
>[125367.359887] r8712: resuming...
>[125367.387012] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[125367.448052] ata6: SATA link down (SStatus 0 SControl 300)
>[125367.448094] ata4: SATA link down (SStatus 0 SControl 300)
>[125367.448123] ata3: SATA link down (SStatus 0 SControl 300)
>[125367.448148] ata5: SATA link down (SStatus 0 SControl 300)
>[125367.602972] ata2: softreset failed (device not ready)
>[125367.602975] ata2: applying PMP SRST workaround and retrying
>[125367.703970] firewire_core 0000:03:00.0: rediscovered device fw0
>[125367.757957] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[125367.764112] ata2.00: configured for UDMA/100
>[125368.831594] r8169 0000:02:00.0 em1: link up
>[125368.831602] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[125375.506737] ata1: softreset failed (device not ready)
>[125375.506739] ata1: applying PMP SRST workaround and retrying
>[125375.661724] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[125375.689927] ata1.00: configured for UDMA/133
>[125375.690011] sd 0:0:0:0: [sda] Starting disk
>[125375.713790] PM: resume of devices complete after 8572.768 msecs
>[125375.714233] PM: Finishing wakeup.
>[125375.714234] Restarting tasks ... done.
>[125378.101968] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[130124.375217] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[130124.704370] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[130124.848008] r8169 0000:02:00.0 em1: link down
>[130124.848028] r8169 0000:02:00.0 em1: link down
>[130124.848092] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[130124.938949] r8169 0000:02:00.0 em1: link down
>[130124.938995] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[130125.357066] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[130125.516895] r8169 0000:02:00.0 em1: link down
>[130125.516980] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[130125.890764] PM: Syncing filesystems ... done.
>[130125.905618] PM: Preparing system for mem sleep
>[130126.160217] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[130126.172598] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[130126.183592] PM: Entering mem sleep
>[130126.183622] Suspending console(s) (use no_console_suspend to debug)
>[130126.184102] r8712: suspending...
>[130126.184210] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[130126.184365] sd 0:0:0:0: [sda] Stopping disk
>[130126.220568] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[130126.220602] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[130126.220708] serial 00:06: disabled
>[130126.220795] serial 00:05: disabled
>[130126.222483] ACPI handle has no context!
>[130127.069370] PM: suspend of devices complete after 885.705 msecs
>[130127.069585] PM: late suspend of devices complete after 0.211 msecs
>[130127.069744] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[130127.080369] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[130127.080459] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[130127.091333] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[130127.091355] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[130127.091385] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[130127.102330] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[130127.102352] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[130127.102431] PM: noirq suspend of devices complete after 32.851 msecs
>[130127.102471] ACPI: Preparing to enter system sleep state S3
>[130127.110509] PM: Saving platform NVS memory
>[130127.110698] Disabling non-boot CPUs ...
>[130127.111026] Broke affinity for irq 16
>[130127.111033] Broke affinity for irq 22
>[130127.112171] smpboot: CPU 1 is now offline
>[130127.112475] CPU 1 offline: Remove Rx thread
>[130127.112903] Broke affinity for irq 17
>[130127.113945] smpboot: CPU 2 is now offline
>[130127.114140] CPU 2 offline: Remove Rx thread
>[130127.114505] ACPI: Low-level resume complete
>[130127.114540] PM: Restoring platform NVS memory
>[130127.114600] PCI-DMA: Resuming GART IOMMU
>[130127.114601] PCI-DMA: Restoring GART aperture settings
>[130127.114850] LVT offset 0 assigned for vector 0xf9
>[130127.114856] microcode: CPU0: new patch_level=0x010000db
>[130127.114863] Enabling non-boot CPUs ...
>[130127.114941] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[130127.125976] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[130127.125977] perf: IBS APIC setup failed on cpu #1
>[130127.128350] microcode: CPU1: new patch_level=0x010000db
>[130127.128358] bnx2i: CPU 1 online: Create Rx thread
>[130127.128405] CPU1 is up
>[130127.128442] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[130127.139476] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[130127.139477] perf: IBS APIC setup failed on cpu #2
>[130127.141834] microcode: CPU2: new patch_level=0x010000db
>[130127.141842] bnx2i: CPU 2 online: Create Rx thread
>[130127.141889] CPU2 is up
>[130127.142374] ACPI: Waking up from system sleep state S3
>[130127.169878] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[130127.169900] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[130127.180862] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[130127.180890] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[130127.180912] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[130127.191860] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[130127.202911] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[130127.246963] PM: noirq resume of devices complete after 87.974 msecs
>[130127.247129] PM: early resume of devices complete after 0.138 msecs
>[130127.247435] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[130127.247857] serial 00:05: activated
>[130127.248282] serial 00:06: activated
>[130127.248318] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[130127.248704] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[130127.248706] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[130127.248845] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[130127.260752] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[130127.260834] radeon 0000:01:00.0: WB enabled
>[130127.260837] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[130127.306946] [drm] ring test on 0 succeeded in 1 usecs
>[130127.306963] [drm] ib test on ring 0 succeeded in 0 usecs
>[130127.318048] r8169 0000:02:00.0 em1: link down
>[130127.464549] r8712: resuming...
>[130127.490780] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[130127.553816] ata6: SATA link down (SStatus 0 SControl 300)
>[130127.553856] ata3: SATA link down (SStatus 0 SControl 300)
>[130127.553885] ata5: SATA link down (SStatus 0 SControl 300)
>[130127.553911] ata4: SATA link down (SStatus 0 SControl 300)
>[130127.708734] ata2: softreset failed (device not ready)
>[130127.708737] ata2: applying PMP SRST workaround and retrying
>[130127.802738] firewire_core 0000:03:00.0: rediscovered device fw0
>[130127.863716] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[130127.869870] ata2.00: configured for UDMA/100
>[130128.958573] r8169 0000:02:00.0 em1: link up
>[130128.958581] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[130135.714484] ata1: softreset failed (device not ready)
>[130135.714486] ata1: applying PMP SRST workaround and retrying
>[130135.869469] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[130135.900163] ata1.00: configured for UDMA/133
>[130135.900248] sd 0:0:0:0: [sda] Starting disk
>[130135.924027] PM: resume of devices complete after 8678.253 msecs
>[130135.924479] PM: Finishing wakeup.
>[130135.924480] Restarting tasks ... done.
>[130138.188472] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[133676.741137] SELinux: 2048 avtab hash slots, 95420 rules.
>[133676.754323] SELinux: 2048 avtab hash slots, 95420 rules.
>[133677.157669] SELinux:  9 users, 15 roles, 4379 types, 240 bools, 1 sens, 1024 cats
>[133677.157674] SELinux:  83 classes, 95420 rules
>[134683.598344] r8169 0000:02:00.0 em1: link down
>[134683.598419] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[134683.600295] r8169 0000:02:00.0 em1: link down
>[134685.177685] r8169 0000:02:00.0 em1: link up
>[134685.177759] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[134685.715121] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[134685.736687] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[134686.406031] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[134686.592879] r8169 0000:02:00.0 em1: link down
>[134686.592983] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[134686.593392] r8169 0000:02:00.0 em1: link down
>[134687.005963] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[134687.176743] r8169 0000:02:00.0 em1: link down
>[134687.176788] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[134687.598944] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[134687.763640] r8169 0000:02:00.0 em1: link down
>[134687.763686] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[134688.472810] PM: Syncing filesystems ... done.
>[134688.478977] PM: Preparing system for mem sleep
>[134688.604391] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[134688.638330] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[134688.649351] PM: Entering mem sleep
>[134688.649378] Suspending console(s) (use no_console_suspend to debug)
>[134688.649824] r8712: suspending...
>[134688.649933] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[134688.688538] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[134688.688639] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[134688.688744] serial 00:06: disabled
>[134688.688831] serial 00:05: disabled
>[134688.690342] ACPI handle has no context!
>[134688.704623] sd 0:0:0:0: [sda] Stopping disk
>[134689.630118] PM: suspend of devices complete after 980.709 msecs
>[134689.630335] PM: late suspend of devices complete after 0.213 msecs
>[134689.630494] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[134689.641117] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[134689.641207] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[134689.652081] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[134689.652103] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[134689.652133] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[134689.663079] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[134689.663100] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[134689.663181] PM: noirq suspend of devices complete after 32.848 msecs
>[134689.663221] ACPI: Preparing to enter system sleep state S3
>[134689.671261] PM: Saving platform NVS memory
>[134689.671456] Disabling non-boot CPUs ...
>[134689.671809] Broke affinity for irq 16
>[134689.671816] Broke affinity for irq 17
>[134689.671822] Broke affinity for irq 22
>[134689.672862] smpboot: CPU 1 is now offline
>[134689.673202] CPU 1 offline: Remove Rx thread
>[134689.674622] smpboot: CPU 2 is now offline
>[134689.674951] CPU 2 offline: Remove Rx thread
>[134689.675333] ACPI: Low-level resume complete
>[134689.675369] PM: Restoring platform NVS memory
>[134689.675429] PCI-DMA: Resuming GART IOMMU
>[134689.675429] PCI-DMA: Restoring GART aperture settings
>[134689.675678] LVT offset 0 assigned for vector 0xf9
>[134689.675684] microcode: CPU0: new patch_level=0x010000db
>[134689.675691] Enabling non-boot CPUs ...
>[134689.675771] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[134689.686806] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[134689.686807] perf: IBS APIC setup failed on cpu #1
>[134689.689191] microcode: CPU1: new patch_level=0x010000db
>[134689.689198] bnx2i: CPU 1 online: Create Rx thread
>[134689.689248] CPU1 is up
>[134689.689286] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[134689.700320] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[134689.700322] perf: IBS APIC setup failed on cpu #2
>[134689.702667] microcode: CPU2: new patch_level=0x010000db
>[134689.702674] bnx2i: CPU 2 online: Create Rx thread
>[134689.702723] CPU2 is up
>[134689.703206] ACPI: Waking up from system sleep state S3
>[134689.730629] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[134689.730652] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[134689.741608] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[134689.741636] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[134689.741658] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[134689.752606] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[134689.763658] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[134689.807710] PM: noirq resume of devices complete after 87.974 msecs
>[134689.807877] PM: early resume of devices complete after 0.139 msecs
>[134689.808183] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[134689.808205] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[134689.809435] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[134689.809436] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[134689.810076] serial 00:05: activated
>[134689.810453] serial 00:06: activated
>[134689.810493] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[134689.821852] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[134689.821908] radeon 0000:01:00.0: WB enabled
>[134689.821911] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[134689.868020] [drm] ring test on 0 succeeded in 1 usecs
>[134689.868037] [drm] ib test on ring 0 succeeded in 0 usecs
>[134689.879800] r8169 0000:02:00.0 em1: link down
>[134689.923328] r8712: resuming...
>[134690.115542] ata6: SATA link down (SStatus 0 SControl 300)
>[134690.115577] ata4: SATA link down (SStatus 0 SControl 300)
>[134690.115612] ata3: SATA link down (SStatus 0 SControl 300)
>[134690.124569] ata5: SATA link down (SStatus 0 SControl 300)
>[134690.279482] ata2: softreset failed (device not ready)
>[134690.279484] ata2: applying PMP SRST workaround and retrying
>[134690.361486] firewire_core 0000:03:00.0: rediscovered device fw0
>[134690.434474] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[134690.440887] ata2.00: configured for UDMA/100
>[134691.507612] r8169 0000:02:00.0 em1: link up
>[134691.507620] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[134698.234240] ata1: softreset failed (device not ready)
>[134698.234242] ata1: applying PMP SRST workaround and retrying
>[134698.389231] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[134698.415062] ata1.00: configured for UDMA/133
>[134698.415143] sd 0:0:0:0: [sda] Starting disk
>[134698.438925] PM: resume of devices complete after 8632.393 msecs
>[134698.439466] PM: Finishing wakeup.
>[134698.439468] Restarting tasks ... done.
>[134701.088600] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[137203.068979] r8169 0000:02:00.0 em1: link down
>[137203.068994] r8169 0000:02:00.0 em1: link down
>[137203.069288] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[137204.639122] r8169 0000:02:00.0 em1: link up
>[137204.639145] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[137205.182807] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[137205.211344] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[137205.890695] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[137206.074451] r8169 0000:02:00.0 em1: link down
>[137206.074461] r8169 0000:02:00.0 em1: link down
>[137206.074507] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[137206.482856] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[137206.645365] r8169 0000:02:00.0 em1: link down
>[137206.645446] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[137207.063882] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[137207.199283] r8169 0000:02:00.0 em1: link down
>[137207.199330] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[137207.829194] PM: Syncing filesystems ... done.
>[137207.831930] PM: Preparing system for mem sleep
>[137207.934365] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[137207.945982] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[137207.956974] PM: Entering mem sleep
>[137207.957001] Suspending console(s) (use no_console_suspend to debug)
>[137207.957464] r8712: suspending...
>[137207.957574] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[137207.997924] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[137207.997958] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[137207.998058] serial 00:06: disabled
>[137207.998145] serial 00:05: disabled
>[137207.999962] ACPI handle has no context!
>[137208.001489] sd 0:0:0:0: [sda] Stopping disk
>[137208.965730] PM: suspend of devices complete after 1008.712 msecs
>[137208.965946] PM: late suspend of devices complete after 0.212 msecs
>[137208.966104] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[137208.976761] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[137208.976851] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[137208.987726] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[137208.987748] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[137208.987778] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[137208.998724] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[137208.998746] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[137208.998826] PM: noirq suspend of devices complete after 32.881 msecs
>[137208.998865] ACPI: Preparing to enter system sleep state S3
>[137209.006900] PM: Saving platform NVS memory
>[137209.007077] Disabling non-boot CPUs ...
>[137209.007428] Broke affinity for irq 16
>[137209.007434] Broke affinity for irq 17
>[137209.007441] Broke affinity for irq 22
>[137209.008492] smpboot: CPU 1 is now offline
>[137209.008812] CPU 1 offline: Remove Rx thread
>[137209.010227] smpboot: CPU 2 is now offline
>[137209.010583] CPU 2 offline: Remove Rx thread
>[137209.010966] ACPI: Low-level resume complete
>[137209.011005] PM: Restoring platform NVS memory
>[137209.011066] PCI-DMA: Resuming GART IOMMU
>[137209.011067] PCI-DMA: Restoring GART aperture settings
>[137209.011315] LVT offset 0 assigned for vector 0xf9
>[137209.011321] microcode: CPU0: new patch_level=0x010000db
>[137209.011343] Enabling non-boot CPUs ...
>[137209.011409] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[137209.022443] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[137209.022444] perf: IBS APIC setup failed on cpu #1
>[137209.024831] microcode: CPU1: new patch_level=0x010000db
>[137209.024839] bnx2i: CPU 1 online: Create Rx thread
>[137209.024888] CPU1 is up
>[137209.024924] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[137209.035959] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[137209.035960] perf: IBS APIC setup failed on cpu #2
>[137209.038323] microcode: CPU2: new patch_level=0x010000db
>[137209.038330] bnx2i: CPU 2 online: Create Rx thread
>[137209.038378] CPU2 is up
>[137209.038852] ACPI: Waking up from system sleep state S3
>[137209.066285] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[137209.066308] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[137209.077261] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[137209.077289] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[137209.077311] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[137209.088259] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[137209.099312] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[137209.143362] PM: noirq resume of devices complete after 87.978 msecs
>[137209.143529] PM: early resume of devices complete after 0.138 msecs
>[137209.143846] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[137209.143878] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[137209.145095] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[137209.145096] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[137209.145698] serial 00:05: activated
>[137209.146065] serial 00:06: activated
>[137209.146100] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[137209.158904] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[137209.158959] radeon 0000:01:00.0: WB enabled
>[137209.158961] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[137209.205092] [drm] ring test on 0 succeeded in 1 usecs
>[137209.205108] [drm] ib test on ring 0 succeeded in 0 usecs
>[137209.217443] r8169 0000:02:00.0 em1: link down
>[137209.360032] r8712: resuming...
>[137209.387182] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[137209.451183] ata4: SATA link down (SStatus 0 SControl 300)
>[137209.451222] ata6: SATA link down (SStatus 0 SControl 300)
>[137209.455192] ata5: SATA link down (SStatus 0 SControl 300)
>[137209.455226] ata3: SATA link down (SStatus 0 SControl 300)
>[137209.610135] ata2: softreset failed (device not ready)
>[137209.610138] ata2: applying PMP SRST workaround and retrying
>[137209.705140] firewire_core 0000:03:00.0: rediscovered device fw0
>[137209.765127] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[137209.771572] ata2.00: configured for UDMA/100
>[137210.822110] r8169 0000:02:00.0 em1: link up
>[137210.822117] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[137217.615889] ata1: softreset failed (device not ready)
>[137217.615892] ata1: applying PMP SRST workaround and retrying
>[137217.770879] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[137217.799952] ata1.00: configured for UDMA/133
>[137217.800026] sd 0:0:0:0: [sda] Starting disk
>[137217.823912] PM: resume of devices complete after 8681.737 msecs
>[137217.824365] PM: Finishing wakeup.
>[137217.824367] Restarting tasks ... done.
>[137220.221268] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[150709.601898] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[150709.932993] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[150710.085637] r8169 0000:02:00.0 em1: link down
>[150710.085669] r8169 0000:02:00.0 em1: link down
>[150710.085798] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[150710.174604] r8169 0000:02:00.0 em1: link down
>[150710.174648] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[150710.594708] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[150710.762499] r8169 0000:02:00.0 em1: link down
>[150710.762545] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[150711.359828] PM: Syncing filesystems ... done.
>[150711.369228] PM: Preparing system for mem sleep
>[150711.734004] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[150711.768182] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[150711.779178] PM: Entering mem sleep
>[150711.779205] Suspending console(s) (use no_console_suspend to debug)
>[150711.779596] r8712: suspending...
>[150711.779741] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[150711.779884] sd 0:0:0:0: [sda] Stopping disk
>[150711.822743] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[150711.822778] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[150711.822961] serial 00:06: disabled
>[150711.823056] serial 00:05: disabled
>[150711.825077] ACPI handle has no context!
>[150712.666974] PM: suspend of devices complete after 887.732 msecs
>[150712.667191] PM: late suspend of devices complete after 0.213 msecs
>[150712.667351] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[150712.678008] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[150712.678099] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[150712.688948] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[150712.688971] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[150712.689001] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[150712.699945] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[150712.699968] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[150712.700049] PM: noirq suspend of devices complete after 32.859 msecs
>[150712.700088] ACPI: Preparing to enter system sleep state S3
>[150712.708132] PM: Saving platform NVS memory
>[150712.708311] Disabling non-boot CPUs ...
>[150712.708669] Broke affinity for irq 16
>[150712.708676] Broke affinity for irq 17
>[150712.709729] smpboot: CPU 1 is now offline
>[150712.709964] CPU 1 offline: Remove Rx thread
>[150712.710370] Broke affinity for irq 22
>[150712.711399] smpboot: CPU 2 is now offline
>[150712.711581] CPU 2 offline: Remove Rx thread
>[150712.711935] ACPI: Low-level resume complete
>[150712.711970] PM: Restoring platform NVS memory
>[150712.712028] PCI-DMA: Resuming GART IOMMU
>[150712.712028] PCI-DMA: Restoring GART aperture settings
>[150712.712277] LVT offset 0 assigned for vector 0xf9
>[150712.712283] microcode: CPU0: new patch_level=0x010000db
>[150712.712306] Enabling non-boot CPUs ...
>[150712.712456] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[150712.723490] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[150712.723492] perf: IBS APIC setup failed on cpu #1
>[150712.725869] microcode: CPU1: new patch_level=0x010000db
>[150712.725876] bnx2i: CPU 1 online: Create Rx thread
>[150712.725925] CPU1 is up
>[150712.725964] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[150712.736999] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[150712.737000] perf: IBS APIC setup failed on cpu #2
>[150712.739324] microcode: CPU2: new patch_level=0x010000db
>[150712.739331] bnx2i: CPU 2 online: Create Rx thread
>[150712.739379] CPU2 is up
>[150712.739846] ACPI: Waking up from system sleep state S3
>[150712.766495] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[150712.766518] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[150712.777473] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[150712.777500] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[150712.777522] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[150712.788472] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[150712.799528] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[150712.843578] PM: noirq resume of devices complete after 87.976 msecs
>[150712.843747] PM: early resume of devices complete after 0.139 msecs
>[150712.844138] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[150712.844222] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[150712.844489] serial 00:05: activated
>[150712.844918] serial 00:06: activated
>[150712.844954] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[150712.845391] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[150712.845392] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[150712.857639] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[150712.857697] radeon 0000:01:00.0: WB enabled
>[150712.857699] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[150712.903809] [drm] ring test on 0 succeeded in 1 usecs
>[150712.903825] [drm] ib test on ring 0 succeeded in 0 usecs
>[150712.913664] r8169 0000:02:00.0 em1: link down
>[150713.061624] r8712: resuming...
>[150713.088395] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[150713.149437] ata4: SATA link down (SStatus 0 SControl 300)
>[150713.149472] ata3: SATA link down (SStatus 0 SControl 300)
>[150713.149501] ata5: SATA link down (SStatus 0 SControl 300)
>[150713.149531] ata6: SATA link down (SStatus 0 SControl 300)
>[150713.304348] ata2: softreset failed (device not ready)
>[150713.304350] ata2: applying PMP SRST workaround and retrying
>[150713.398355] firewire_core 0000:03:00.0: rediscovered device fw0
>[150713.459338] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[150713.465467] ata2.00: configured for UDMA/100
>[150714.512043] r8169 0000:02:00.0 em1: link up
>[150714.512051] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[150721.208118] ata1: softreset failed (device not ready)
>[150721.208121] ata1: applying PMP SRST workaround and retrying
>[150721.363105] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[150721.384896] ata1.00: configured for UDMA/133
>[150721.384989] sd 0:0:0:0: [sda] Starting disk
>[150721.408768] PM: resume of devices complete after 8566.355 msecs
>[150721.418138] PM: Finishing wakeup.
>[150721.422936] Restarting tasks ... done.
>[150724.116654] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[156436.085718] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[156436.419833] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[156436.605415] r8169 0000:02:00.0 em1: link down
>[156436.605462] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[156436.605678] r8169 0000:02:00.0 em1: link down
>[156436.696386] r8169 0000:02:00.0 em1: link down
>[156436.696554] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[156437.119521] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[156437.278365] r8169 0000:02:00.0 em1: link down
>[156437.278451] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[156437.310487] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[156437.815714] PM: Syncing filesystems ... done.
>[156437.821383] PM: Preparing system for mem sleep
>[156437.891183] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[156437.903048] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[156437.914029] PM: Entering mem sleep
>[156437.914056] Suspending console(s) (use no_console_suspend to debug)
>[156437.914493] r8712: suspending...
>[156437.914633] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[156437.951460] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[156437.951493] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[156437.951593] serial 00:06: disabled
>[156437.951679] serial 00:05: disabled
>[156437.953925] ACPI handle has no context!
>[156437.992180] sd 0:0:0:0: [sda] Stopping disk
>[156438.893816] PM: suspend of devices complete after 979.735 msecs
>[156438.894031] PM: late suspend of devices complete after 0.211 msecs
>[156438.894189] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[156438.904821] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[156438.904911] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[156438.915784] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[156438.915806] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[156438.915836] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[156438.926781] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[156438.926803] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[156438.926884] PM: noirq suspend of devices complete after 32.856 msecs
>[156438.926922] ACPI: Preparing to enter system sleep state S3
>[156438.934964] PM: Saving platform NVS memory
>[156438.935158] Disabling non-boot CPUs ...
>[156438.935515] Broke affinity for irq 16
>[156438.935521] Broke affinity for irq 17
>[156438.936574] smpboot: CPU 1 is now offline
>[156438.936873] CPU 1 offline: Remove Rx thread
>[156438.937261] Broke affinity for irq 22
>[156438.938290] smpboot: CPU 2 is now offline
>[156438.938599] CPU 2 offline: Remove Rx thread
>[156438.938973] ACPI: Low-level resume complete
>[156438.939008] PM: Restoring platform NVS memory
>[156438.939070] PCI-DMA: Resuming GART IOMMU
>[156438.939071] PCI-DMA: Restoring GART aperture settings
>[156438.939319] LVT offset 0 assigned for vector 0xf9
>[156438.939325] microcode: CPU0: new patch_level=0x010000db
>[156438.939332] Enabling non-boot CPUs ...
>[156438.939411] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[156438.950445] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[156438.950447] perf: IBS APIC setup failed on cpu #1
>[156438.952825] microcode: CPU1: new patch_level=0x010000db
>[156438.952833] bnx2i: CPU 1 online: Create Rx thread
>[156438.952881] CPU1 is up
>[156438.952918] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[156438.963952] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[156438.963954] perf: IBS APIC setup failed on cpu #2
>[156438.966303] microcode: CPU2: new patch_level=0x010000db
>[156438.966310] bnx2i: CPU 2 online: Create Rx thread
>[156438.966357] CPU2 is up
>[156438.966847] ACPI: Waking up from system sleep state S3
>[156438.994337] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[156438.994360] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[156439.005315] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[156439.005343] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[156439.005365] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[156439.016313] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[156439.027365] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[156439.071415] PM: noirq resume of devices complete after 87.970 msecs
>[156439.071582] PM: early resume of devices complete after 0.138 msecs
>[156439.071858] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[156439.071911] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[156439.072435] serial 00:05: activated
>[156439.072847] serial 00:06: activated
>[156439.072882] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[156439.073173] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[156439.073174] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[156439.085100] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[156439.085158] radeon 0000:01:00.0: WB enabled
>[156439.085160] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[156439.131277] [drm] ring test on 0 succeeded in 1 usecs
>[156439.131293] [drm] ib test on ring 0 succeeded in 0 usecs
>[156439.142510] r8169 0000:02:00.0 em1: link down
>[156439.287664] r8712: resuming...
>[156439.315237] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[156439.377254] ata4: SATA link down (SStatus 0 SControl 300)
>[156439.377289] ata5: SATA link down (SStatus 0 SControl 300)
>[156439.377323] ata3: SATA link down (SStatus 0 SControl 300)
>[156439.379239] ata6: SATA link down (SStatus 0 SControl 300)
>[156439.532190] ata2: softreset failed (device not ready)
>[156439.532192] ata2: applying PMP SRST workaround and retrying
>[156439.626196] firewire_core 0000:03:00.0: rediscovered device fw0
>[156439.687184] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[156439.693333] ata2.00: configured for UDMA/100
>[156440.781680] r8169 0000:02:00.0 em1: link up
>[156440.781688] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[156447.435959] ata1: softreset failed (device not ready)
>[156447.435961] ata1: applying PMP SRST workaround and retrying
>[156447.590946] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[156447.621357] ata1.00: configured for UDMA/133
>[156447.621441] sd 0:0:0:0: [sda] Starting disk
>[156447.645292] PM: resume of devices complete after 8575.050 msecs
>[156447.654626] PM: Finishing wakeup.
>[156447.654627] Restarting tasks ... done.
>[156449.858269] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[160011.588070] r8169 0000:02:00.0 em1: link down
>[160011.588154] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[160011.588654] r8169 0000:02:00.0 em1: link down
>[160013.295066] r8169 0000:02:00.0 em1: link up
>[160013.295088] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[160013.704912] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[160013.725605] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[160014.333834] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[160014.517659] r8169 0000:02:00.0 em1: link down
>[160014.517753] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[160014.517829] r8169 0000:02:00.0 em1: link down
>[160014.933770] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[160015.097526] r8169 0000:02:00.0 em1: link down
>[160015.097573] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[160015.492717] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[160015.662431] r8169 0000:02:00.0 em1: link down
>[160015.662478] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[160016.268719] PM: Syncing filesystems ... done.
>[160016.506080] PM: Preparing system for mem sleep
>[160016.881948] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[160016.893080] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[160016.904071] PM: Entering mem sleep
>[160016.904097] Suspending console(s) (use no_console_suspend to debug)
>[160016.904481] r8712: suspending...
>[160016.904686] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[160016.904841] sd 0:0:0:0: [sda] Stopping disk
>[160016.940995] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[160016.941030] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[160016.941131] serial 00:06: disabled
>[160016.941218] serial 00:05: disabled
>[160016.942968] ACPI handle has no context!
>[160017.797867] PM: suspend of devices complete after 893.738 msecs
>[160017.798085] PM: late suspend of devices complete after 0.214 msecs
>[160017.798243] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[160017.808869] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[160017.808960] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[160017.819833] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[160017.819855] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[160017.819885] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[160017.830833] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[160017.830855] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[160017.830936] PM: noirq suspend of devices complete after 32.849 msecs
>[160017.830975] ACPI: Preparing to enter system sleep state S3
>[160017.839032] PM: Saving platform NVS memory
>[160017.839221] Disabling non-boot CPUs ...
>[160017.839571] Broke affinity for irq 16
>[160017.839578] Broke affinity for irq 17
>[160017.840630] smpboot: CPU 1 is now offline
>[160017.840906] CPU 1 offline: Remove Rx thread
>[160017.841284] Broke affinity for irq 22
>[160017.842313] smpboot: CPU 2 is now offline
>[160017.842649] CPU 2 offline: Remove Rx thread
>[160017.843034] ACPI: Low-level resume complete
>[160017.843069] PM: Restoring platform NVS memory
>[160017.843132] PCI-DMA: Resuming GART IOMMU
>[160017.843132] PCI-DMA: Restoring GART aperture settings
>[160017.843381] LVT offset 0 assigned for vector 0xf9
>[160017.843387] microcode: CPU0: new patch_level=0x010000db
>[160017.843394] Enabling non-boot CPUs ...
>[160017.843474] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[160017.854509] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[160017.854510] perf: IBS APIC setup failed on cpu #1
>[160017.856892] microcode: CPU1: new patch_level=0x010000db
>[160017.856901] bnx2i: CPU 1 online: Create Rx thread
>[160017.856950] CPU1 is up
>[160017.856986] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[160017.868020] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[160017.868021] perf: IBS APIC setup failed on cpu #2
>[160017.870382] microcode: CPU2: new patch_level=0x010000db
>[160017.870389] bnx2i: CPU 2 online: Create Rx thread
>[160017.870436] CPU2 is up
>[160017.870922] ACPI: Waking up from system sleep state S3
>[160017.898391] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[160017.898414] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[160017.909370] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[160017.909399] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[160017.909421] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[160017.920396] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[160017.931423] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[160017.975472] PM: noirq resume of devices complete after 87.971 msecs
>[160017.975637] PM: early resume of devices complete after 0.136 msecs
>[160017.975956] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[160017.976013] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[160017.977186] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[160017.977187] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[160017.987015] serial 00:05: activated
>[160017.987387] serial 00:06: activated
>[160017.987424] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[160017.989142] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[160017.989197] radeon 0000:01:00.0: WB enabled
>[160017.989199] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[160018.035316] [drm] ring test on 0 succeeded in 1 usecs
>[160018.035333] [drm] ib test on ring 0 succeeded in 0 usecs
>[160018.049558] r8169 0000:02:00.0 em1: link down
>[160018.192184] r8712: resuming...
>[160018.219289] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[160018.280305] ata5: SATA link down (SStatus 0 SControl 300)
>[160018.280340] ata4: SATA link down (SStatus 0 SControl 300)
>[160018.280375] ata6: SATA link down (SStatus 0 SControl 300)
>[160018.282309] ata3: SATA link down (SStatus 0 SControl 300)
>[160018.435273] ata2: softreset failed (device not ready)
>[160018.435276] ata2: applying PMP SRST workaround and retrying
>[160018.529249] firewire_core 0000:03:00.0: rediscovered device fw0
>[160018.590233] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[160018.596871] ata2.00: configured for UDMA/100
>[160019.633494] r8169 0000:02:00.0 em1: link up
>[160019.633502] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[160026.341015] ata1: softreset failed (device not ready)
>[160026.341018] ata1: applying PMP SRST workaround and retrying
>[160026.496001] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[160026.518559] ata1.00: configured for UDMA/133
>[160026.518666] sd 0:0:0:0: [sda] Starting disk
>[160026.542334] PM: resume of devices complete after 8568.034 msecs
>[160026.551743] PM: Finishing wakeup.
>[160026.551744] Restarting tasks ... done.
>[160028.775502] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[160980.158279] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[160980.486173] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[160980.618021] r8169 0000:02:00.0 em1: link down
>[160980.618081] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[160980.618443] r8169 0000:02:00.0 em1: link down
>[160980.693984] r8169 0000:02:00.0 em1: link down
>[160980.694134] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[160981.102106] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[160981.256909] r8169 0000:02:00.0 em1: link down
>[160981.257066] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[160981.823474] PM: Syncing filesystems ... done.
>[160981.825640] PM: Preparing system for mem sleep
>[160981.930477] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[160981.942643] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[160981.953634] PM: Entering mem sleep
>[160981.953661] Suspending console(s) (use no_console_suspend to debug)
>[160981.954081] r8712: suspending...
>[160981.954215] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[160981.993234] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[160981.993267] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[160981.993370] serial 00:06: disabled
>[160981.993470] serial 00:05: disabled
>[160981.995519] ACPI handle has no context!
>[160982.025216] sd 0:0:0:0: [sda] Stopping disk
>[160982.954417] PM: suspend of devices complete after 1000.735 msecs
>[160982.954633] PM: late suspend of devices complete after 0.212 msecs
>[160982.954791] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[160982.965411] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[160982.965500] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[160982.976379] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[160982.976401] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[160982.976431] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[160982.987373] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[160982.987395] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[160982.987475] PM: noirq suspend of devices complete after 32.844 msecs
>[160982.987513] ACPI: Preparing to enter system sleep state S3
>[160982.995557] PM: Saving platform NVS memory
>[160982.996659] Disabling non-boot CPUs ...
>[160982.997026] Broke affinity for irq 16
>[160982.997032] Broke affinity for irq 17
>[160982.998084] smpboot: CPU 1 is now offline
>[160982.998351] CPU 1 offline: Remove Rx thread
>[160982.998726] Broke affinity for irq 22
>[160982.999756] smpboot: CPU 2 is now offline
>[160983.000076] CPU 2 offline: Remove Rx thread
>[160983.000453] ACPI: Low-level resume complete
>[160983.000488] PM: Restoring platform NVS memory
>[160983.000549] PCI-DMA: Resuming GART IOMMU
>[160983.000550] PCI-DMA: Restoring GART aperture settings
>[160983.000798] LVT offset 0 assigned for vector 0xf9
>[160983.000804] microcode: CPU0: new patch_level=0x010000db
>[160983.000811] Enabling non-boot CPUs ...
>[160983.000903] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[160983.011938] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[160983.011939] perf: IBS APIC setup failed on cpu #1
>[160983.014321] microcode: CPU1: new patch_level=0x010000db
>[160983.014329] bnx2i: CPU 1 online: Create Rx thread
>[160983.014379] CPU1 is up
>[160983.014418] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[160983.025451] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[160983.025453] perf: IBS APIC setup failed on cpu #2
>[160983.027783] microcode: CPU2: new patch_level=0x010000db
>[160983.027789] bnx2i: CPU 2 online: Create Rx thread
>[160983.027879] CPU2 is up
>[160983.028317] ACPI: Waking up from system sleep state S3
>[160983.054930] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[160983.054953] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[160983.065909] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[160983.065937] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[160983.065959] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[160983.076907] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[160983.087960] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[160983.132010] PM: noirq resume of devices complete after 87.965 msecs
>[160983.132176] PM: early resume of devices complete after 0.137 msecs
>[160983.132544] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[160983.132737] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[160983.133096] serial 00:05: activated
>[160983.133501] serial 00:06: activated
>[160983.133537] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[160983.133786] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[160983.133787] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[160983.145880] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[160983.145937] radeon 0000:01:00.0: WB enabled
>[160983.145939] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[160983.192050] [drm] ring test on 0 succeeded in 1 usecs
>[160983.192066] [drm] ib test on ring 0 succeeded in 0 usecs
>[160983.206096] r8169 0000:02:00.0 em1: link down
>[160983.349087] r8712: resuming...
>[160983.375827] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[160983.437832] ata5: SATA link down (SStatus 0 SControl 300)
>[160983.437868] ata4: SATA link down (SStatus 0 SControl 300)
>[160983.440841] ata3: SATA link down (SStatus 0 SControl 300)
>[160983.440879] ata6: SATA link down (SStatus 0 SControl 300)
>[160983.591801] ata2: softreset failed (device not ready)
>[160983.591803] ata2: applying PMP SRST workaround and retrying
>[160983.683790] firewire_core 0000:03:00.0: rediscovered device fw0
>[160983.746775] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[160983.752929] ata2.00: configured for UDMA/100
>[160984.779561] r8169 0000:02:00.0 em1: link up
>[160984.779577] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[160991.444575] ata1: softreset failed (device not ready)
>[160991.444578] ata1: applying PMP SRST workaround and retrying
>[160991.599544] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[160991.630122] ata1.00: configured for UDMA/133
>[160991.630214] sd 0:0:0:0: [sda] Starting disk
>[160991.653966] PM: resume of devices complete after 8523.118 msecs
>[160991.663299] PM: Finishing wakeup.
>[160991.663301] Restarting tasks ... done.
>[160994.100879] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[163844.929500] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[163845.259632] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[163845.413299] r8169 0000:02:00.0 em1: link down
>[163845.413303] r8169 0000:02:00.0 em1: link down
>[163845.413628] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[163845.496282] r8169 0000:02:00.0 em1: link down
>[163845.496464] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[163845.908232] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[163846.067195] r8169 0000:02:00.0 em1: link down
>[163846.067349] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[163846.494327] PM: Syncing filesystems ... done.
>[163846.496323] PM: Preparing system for mem sleep
>[163846.761042] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[163846.772923] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[163846.783903] PM: Entering mem sleep
>[163846.783929] Suspending console(s) (use no_console_suspend to debug)
>[163846.784394] r8712: suspending...
>[163846.784485] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[163846.784625] sd 0:0:0:0: [sda] Stopping disk
>[163846.819329] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[163846.819362] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[163846.819537] serial 00:06: disabled
>[163846.819624] serial 00:05: disabled
>[163846.820822] ACPI handle has no context!
>[163847.681705] PM: suspend of devices complete after 897.743 msecs
>[163847.681922] PM: late suspend of devices complete after 0.213 msecs
>[163847.682081] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[163847.692703] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[163847.692793] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[163847.703666] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[163847.703689] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[163847.703719] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[163847.714664] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[163847.714687] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[163847.714767] PM: noirq suspend of devices complete after 32.847 msecs
>[163847.714806] ACPI: Preparing to enter system sleep state S3
>[163847.722852] PM: Saving platform NVS memory
>[163847.723050] Disabling non-boot CPUs ...
>[163847.723405] Broke affinity for irq 16
>[163847.723412] Broke affinity for irq 17
>[163847.723418] Broke affinity for irq 22
>[163847.724477] smpboot: CPU 1 is now offline
>[163847.724779] CPU 1 offline: Remove Rx thread
>[163847.726191] smpboot: CPU 2 is now offline
>[163847.726515] CPU 2 offline: Remove Rx thread
>[163847.726896] ACPI: Low-level resume complete
>[163847.726932] PM: Restoring platform NVS memory
>[163847.726990] PCI-DMA: Resuming GART IOMMU
>[163847.726990] PCI-DMA: Restoring GART aperture settings
>[163847.727239] LVT offset 0 assigned for vector 0xf9
>[163847.727245] microcode: CPU0: new patch_level=0x010000db
>[163847.727251] Enabling non-boot CPUs ...
>[163847.727333] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[163847.738367] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[163847.738369] perf: IBS APIC setup failed on cpu #1
>[163847.740748] microcode: CPU1: new patch_level=0x010000db
>[163847.740756] bnx2i: CPU 1 online: Create Rx thread
>[163847.740802] CPU1 is up
>[163847.740840] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[163847.751875] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[163847.751876] perf: IBS APIC setup failed on cpu #2
>[163847.754236] microcode: CPU2: new patch_level=0x010000db
>[163847.754243] bnx2i: CPU 2 online: Create Rx thread
>[163847.754292] CPU2 is up
>[163847.754781] ACPI: Waking up from system sleep state S3
>[163847.782213] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[163847.782236] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[163847.793192] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[163847.793220] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[163847.793242] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[163847.804191] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[163847.815242] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[163847.859294] PM: noirq resume of devices complete after 87.968 msecs
>[163847.859467] PM: early resume of devices complete after 0.140 msecs
>[163847.859852] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[163847.859931] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[163847.860219] serial 00:05: activated
>[163847.860645] serial 00:06: activated
>[163847.860680] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[163847.861116] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[163847.861117] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[163847.873148] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[163847.873204] radeon 0000:01:00.0: WB enabled
>[163847.873207] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[163847.919316] [drm] ring test on 0 succeeded in 1 usecs
>[163847.919332] [drm] ib test on ring 0 succeeded in 0 usecs
>[163847.930385] r8169 0000:02:00.0 em1: link down
>[163848.076253] r8712: resuming...
>[163848.103114] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[163848.165130] ata6: SATA link down (SStatus 0 SControl 300)
>[163848.165175] ata4: SATA link down (SStatus 0 SControl 300)
>[163848.165224] ata5: SATA link down (SStatus 0 SControl 300)
>[163848.165250] ata3: SATA link down (SStatus 0 SControl 300)
>[163848.320066] ata2: softreset failed (device not ready)
>[163848.320068] ata2: applying PMP SRST workaround and retrying
>[163848.414074] firewire_core 0000:03:00.0: rediscovered device fw0
>[163848.475055] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[163848.481171] ata2.00: configured for UDMA/100
>[163849.506827] r8169 0000:02:00.0 em1: link up
>[163849.506835] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[163856.223835] ata1: softreset failed (device not ready)
>[163856.223838] ata1: applying PMP SRST workaround and retrying
>[163856.378856] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[163856.404491] ata1.00: configured for UDMA/133
>[163856.404580] sd 0:0:0:0: [sda] Starting disk
>[163856.428347] PM: resume of devices complete after 8570.218 msecs
>[163856.437682] PM: Finishing wakeup.
>[163856.437684] Restarting tasks ... done.
>[163858.718338] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[167561.054157] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[167561.382117] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[167561.525954] r8169 0000:02:00.0 em1: link down
>[167561.525973] r8169 0000:02:00.0 em1: link down
>[167561.526135] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[167561.607911] r8169 0000:02:00.0 em1: link down
>[167561.608066] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[167562.014979] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[167562.162804] r8169 0000:02:00.0 em1: link down
>[167562.162975] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[167562.184290] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[167562.594568] PM: Syncing filesystems ... done.
>[167562.603650] PM: Preparing system for mem sleep
>[167562.887076] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[167562.898586] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[167562.909531] PM: Entering mem sleep
>[167562.909558] Suspending console(s) (use no_console_suspend to debug)
>[167562.909989] r8712: suspending...
>[167562.910122] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[167562.910265] sd 0:0:0:0: [sda] Stopping disk
>[167562.948698] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[167562.948731] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[167562.948842] serial 00:06: disabled
>[167562.948937] serial 00:05: disabled
>[167562.950440] ACPI handle has no context!
>[167563.798331] PM: suspend of devices complete after 888.736 msecs
>[167563.798546] PM: late suspend of devices complete after 0.212 msecs
>[167563.798703] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[167563.809332] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[167563.809423] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[167563.820294] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[167563.820316] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[167563.820346] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[167563.831292] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[167563.831314] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[167563.831395] PM: noirq suspend of devices complete after 32.850 msecs
>[167563.831434] ACPI: Preparing to enter system sleep state S3
>[167563.839473] PM: Saving platform NVS memory
>[167563.839676] Disabling non-boot CPUs ...
>[167563.840003] Broke affinity for irq 16
>[167563.840009] Broke affinity for irq 17
>[167563.840016] Broke affinity for irq 22
>[167563.841074] smpboot: CPU 1 is now offline
>[167563.841348] CPU 1 offline: Remove Rx thread
>[167563.842810] smpboot: CPU 2 is now offline
>[167563.842981] CPU 2 offline: Remove Rx thread
>[167563.843337] ACPI: Low-level resume complete
>[167563.843373] PM: Restoring platform NVS memory
>[167563.843435] PCI-DMA: Resuming GART IOMMU
>[167563.843436] PCI-DMA: Restoring GART aperture settings
>[167563.843684] LVT offset 0 assigned for vector 0xf9
>[167563.843690] microcode: CPU0: new patch_level=0x010000db
>[167563.843694] Enabling non-boot CPUs ...
>[167563.843789] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[167563.854824] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[167563.854825] perf: IBS APIC setup failed on cpu #1
>[167563.857204] microcode: CPU1: new patch_level=0x010000db
>[167563.857211] bnx2i: CPU 1 online: Create Rx thread
>[167563.857260] CPU1 is up
>[167563.857299] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[167563.868333] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[167563.868334] perf: IBS APIC setup failed on cpu #2
>[167563.870663] microcode: CPU2: new patch_level=0x010000db
>[167563.870669] bnx2i: CPU 2 online: Create Rx thread
>[167563.870719] CPU2 is up
>[167563.871224] ACPI: Waking up from system sleep state S3
>[167563.897847] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[167563.897869] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[167563.908831] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[167563.908859] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[167563.908881] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[167563.919828] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[167563.930881] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[167563.974932] PM: noirq resume of devices complete after 87.972 msecs
>[167563.975099] PM: early resume of devices complete after 0.139 msecs
>[167563.975365] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[167563.975410] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[167563.975946] serial 00:05: activated
>[167563.976364] serial 00:06: activated
>[167563.976401] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[167563.976659] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[167563.976660] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[167563.988619] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[167563.988683] radeon 0000:01:00.0: WB enabled
>[167563.988685] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[167564.034800] [drm] ring test on 0 succeeded in 1 usecs
>[167564.034816] [drm] ib test on ring 0 succeeded in 0 usecs
>[167564.046019] r8169 0000:02:00.0 em1: link down
>[167564.194878] r8712: resuming...
>[167564.218744] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[167564.293758] ata6: SATA link down (SStatus 0 SControl 300)
>[167564.293794] ata3: SATA link down (SStatus 0 SControl 300)
>[167564.293823] ata4: SATA link down (SStatus 0 SControl 300)
>[167564.293849] ata5: SATA link down (SStatus 0 SControl 300)
>[167564.448699] ata2: softreset failed (device not ready)
>[167564.448701] ata2: applying PMP SRST workaround and retrying
>[167564.536706] firewire_core 0000:03:00.0: rediscovered device fw0
>[167564.603691] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[167564.610083] ata2.00: configured for UDMA/100
>[167565.664083] r8169 0000:02:00.0 em1: link up
>[167565.664091] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[167572.403458] ata1: softreset failed (device not ready)
>[167572.403460] ata1: applying PMP SRST workaround and retrying
>[167572.558449] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[167572.581520] ata1.00: configured for UDMA/133
>[167572.581608] sd 0:0:0:0: [sda] Starting disk
>[167572.605467] PM: resume of devices complete after 8631.716 msecs
>[167572.614809] PM: Finishing wakeup.
>[167572.614810] Restarting tasks ... done.
>[167575.693667] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[169118.876408] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[169119.209357] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[169119.354946] r8169 0000:02:00.0 em1: link down
>[169119.354996] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[169119.357484] r8169 0000:02:00.0 em1: link down
>[169119.442923] r8169 0000:02:00.0 em1: link down
>[169119.443098] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[169119.856284] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[169120.010865] r8169 0000:02:00.0 em1: link down
>[169120.011182] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[169120.556442] PM: Syncing filesystems ... done.
>[169120.563841] PM: Preparing system for mem sleep
>[169120.832529] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[169120.844566] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[169120.855557] PM: Entering mem sleep
>[169120.855588] Suspending console(s) (use no_console_suspend to debug)
>[169120.856018] r8712: suspending...
>[169120.856120] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[169120.856272] sd 0:0:0:0: [sda] Stopping disk
>[169120.896876] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[169120.896910] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[169120.897019] serial 00:06: disabled
>[169120.897107] serial 00:05: disabled
>[169120.898425] ACPI handle has no context!
>[169121.786326] PM: suspend of devices complete after 930.711 msecs
>[169121.786542] PM: late suspend of devices complete after 0.212 msecs
>[169121.786698] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[169121.797329] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[169121.797418] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[169121.808294] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[169121.808317] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[169121.808346] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[169121.819293] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[169121.819315] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[169121.819396] PM: noirq suspend of devices complete after 32.853 msecs
>[169121.819434] ACPI: Preparing to enter system sleep state S3
>[169121.827482] PM: Saving platform NVS memory
>[169121.827668] Disabling non-boot CPUs ...
>[169121.828001] Broke affinity for irq 16
>[169121.828007] Broke affinity for irq 17
>[169121.829085] smpboot: CPU 1 is now offline
>[169121.829362] CPU 1 offline: Remove Rx thread
>[169121.829798] Broke affinity for irq 22
>[169121.830832] smpboot: CPU 2 is now offline
>[169121.831073] CPU 2 offline: Remove Rx thread
>[169121.831445] ACPI: Low-level resume complete
>[169121.831480] PM: Restoring platform NVS memory
>[169121.831539] PCI-DMA: Resuming GART IOMMU
>[169121.831540] PCI-DMA: Restoring GART aperture settings
>[169121.831787] LVT offset 0 assigned for vector 0xf9
>[169121.831793] microcode: CPU0: new patch_level=0x010000db
>[169121.831809] Enabling non-boot CPUs ...
>[169121.831887] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[169121.842921] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[169121.842922] perf: IBS APIC setup failed on cpu #1
>[169121.845305] microcode: CPU1: new patch_level=0x010000db
>[169121.845314] bnx2i: CPU 1 online: Create Rx thread
>[169121.845360] CPU1 is up
>[169121.845398] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[169121.856433] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[169121.856434] perf: IBS APIC setup failed on cpu #2
>[169121.858807] microcode: CPU2: new patch_level=0x010000db
>[169121.858815] bnx2i: CPU 2 online: Create Rx thread
>[169121.858862] CPU2 is up
>[169121.859344] ACPI: Waking up from system sleep state S3
>[169121.885844] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[169121.885867] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[169121.896828] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[169121.896856] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[169121.896879] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[169121.907826] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[169121.918877] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[169121.962928] PM: noirq resume of devices complete after 87.974 msecs
>[169121.963096] PM: early resume of devices complete after 0.138 msecs
>[169121.963838] serial 00:05: activated
>[169121.964258] serial 00:06: activated
>[169121.964294] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[169121.964677] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[169121.964678] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[169121.970884] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[169121.970950] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[169121.976814] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[169121.976872] radeon 0000:01:00.0: WB enabled
>[169121.976875] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[169122.022984] [drm] ring test on 0 succeeded in 1 usecs
>[169122.023001] [drm] ib test on ring 0 succeeded in 0 usecs
>[169122.034020] r8169 0000:02:00.0 em1: link down
>[169122.180014] r8712: resuming...
>[169122.206742] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[169122.277764] ata6: SATA link down (SStatus 0 SControl 300)
>[169122.277818] ata3: SATA link down (SStatus 0 SControl 300)
>[169122.277852] ata5: SATA link down (SStatus 0 SControl 300)
>[169122.277887] ata4: SATA link down (SStatus 0 SControl 300)
>[169122.432699] ata2: softreset failed (device not ready)
>[169122.432702] ata2: applying PMP SRST workaround and retrying
>[169122.526708] firewire_core 0000:03:00.0: rediscovered device fw0
>[169122.587691] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[169122.594176] ata2.00: configured for UDMA/100
>[169123.753962] r8169 0000:02:00.0 em1: link up
>[169123.753969] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[169130.387459] ata1: softreset failed (device not ready)
>[169130.387461] ata1: applying PMP SRST workaround and retrying
>[169130.542442] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[169130.564006] ata1.00: configured for UDMA/133
>[169130.564095] sd 0:0:0:0: [sda] Starting disk
>[169130.587854] PM: resume of devices complete after 8626.100 msecs
>[169130.597200] PM: Finishing wakeup.
>[169130.597202] Restarting tasks ... done.
>[169132.920079] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[182409.510938] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[182409.844710] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[182409.986617] r8169 0000:02:00.0 em1: link down
>[182409.986701] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[182409.987099] r8169 0000:02:00.0 em1: link down
>[182410.076557] r8169 0000:02:00.0 em1: link down
>[182410.076654] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[182410.498828] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[182410.663438] r8169 0000:02:00.0 em1: link down
>[182410.663597] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[182411.216744] PM: Syncing filesystems ... done.
>[182411.218855] PM: Preparing system for mem sleep
>[182411.312075] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[182411.324154] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[182411.335143] PM: Entering mem sleep
>[182411.335170] Suspending console(s) (use no_console_suspend to debug)
>[182411.335577] r8712: suspending...
>[182411.335688] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[182411.376106] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[182411.376140] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[182411.376247] serial 00:06: disabled
>[182411.376334] serial 00:05: disabled
>[182411.378061] ACPI handle has no context!
>[182411.425194] sd 0:0:0:0: [sda] Stopping disk
>[182412.325909] PM: suspend of devices complete after 990.720 msecs
>[182412.326127] PM: late suspend of devices complete after 0.214 msecs
>[182412.326290] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[182412.336947] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[182412.337037] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[182412.347897] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[182412.347919] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[182412.347949] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[182412.358900] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[182412.358922] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[182412.359002] PM: noirq suspend of devices complete after 32.876 msecs
>[182412.359041] ACPI: Preparing to enter system sleep state S3
>[182412.367081] PM: Saving platform NVS memory
>[182412.367260] Disabling non-boot CPUs ...
>[182412.367613] Broke affinity for irq 16
>[182412.368667] smpboot: CPU 1 is now offline
>[182412.368955] CPU 1 offline: Remove Rx thread
>[182412.369333] Broke affinity for irq 17
>[182412.369339] Broke affinity for irq 18
>[182412.369345] Broke affinity for irq 22
>[182412.370373] smpboot: CPU 2 is now offline
>[182412.370684] CPU 2 offline: Remove Rx thread
>[182412.371055] ACPI: Low-level resume complete
>[182412.371091] PM: Restoring platform NVS memory
>[182412.371152] PCI-DMA: Resuming GART IOMMU
>[182412.371152] PCI-DMA: Restoring GART aperture settings
>[182412.371401] LVT offset 0 assigned for vector 0xf9
>[182412.371407] microcode: CPU0: new patch_level=0x010000db
>[182412.371423] Enabling non-boot CPUs ...
>[182412.371500] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[182412.382535] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[182412.382536] perf: IBS APIC setup failed on cpu #1
>[182412.384917] microcode: CPU1: new patch_level=0x010000db
>[182412.384924] bnx2i: CPU 1 online: Create Rx thread
>[182412.384971] CPU1 is up
>[182412.385010] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[182412.396045] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[182412.396046] perf: IBS APIC setup failed on cpu #2
>[182412.398406] microcode: CPU2: new patch_level=0x010000db
>[182412.398413] bnx2i: CPU 2 online: Create Rx thread
>[182412.398460] CPU2 is up
>[182412.398948] ACPI: Waking up from system sleep state S3
>[182412.426453] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[182412.426476] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[182412.437431] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[182412.437459] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[182412.437482] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[182412.448430] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[182412.459482] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[182412.503533] PM: noirq resume of devices complete after 87.973 msecs
>[182412.503700] PM: early resume of devices complete after 0.137 msecs
>[182412.503984] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[182412.504035] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[182412.505268] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[182412.505269] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[182412.506676] serial 00:05: activated
>[182412.507045] serial 00:06: activated
>[182412.507081] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[182412.517186] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[182412.517240] radeon 0000:01:00.0: WB enabled
>[182412.517243] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[182412.563360] [drm] ring test on 0 succeeded in 1 usecs
>[182412.563377] [drm] ib test on ring 0 succeeded in 0 usecs
>[182412.574638] r8169 0000:02:00.0 em1: link down
>[182412.720197] r8712: resuming...
>[182412.747350] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[182412.808363] ata3: SATA link down (SStatus 0 SControl 300)
>[182412.808399] ata5: SATA link down (SStatus 0 SControl 300)
>[182412.808449] ata4: SATA link down (SStatus 0 SControl 300)
>[182412.808480] ata6: SATA link down (SStatus 0 SControl 300)
>[182412.963311] ata2: softreset failed (device not ready)
>[182412.963313] ata2: applying PMP SRST workaround and retrying
>[182413.057312] firewire_core 0000:03:00.0: rediscovered device fw0
>[182413.118296] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[182413.124452] ata2.00: configured for UDMA/100
>[182414.234691] r8169 0000:02:00.0 em1: link up
>[182414.234698] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[182420.918066] ata1: softreset failed (device not ready)
>[182420.918069] ata1: applying PMP SRST workaround and retrying
>[182421.073063] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[182421.098148] ata1.00: configured for UDMA/133
>[182421.098251] sd 0:0:0:0: [sda] Starting disk
>[182421.122013] PM: resume of devices complete after 8619.657 msecs
>[182421.131342] PM: Finishing wakeup.
>[182421.131344] Restarting tasks ... done.
>[182423.522143] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[187960.330087] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[187960.662725] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[187960.811570] r8169 0000:02:00.0 em1: link down
>[187960.811594] r8169 0000:02:00.0 em1: link down
>[187960.811669] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[187960.900475] r8169 0000:02:00.0 em1: link down
>[187960.900522] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[187961.314644] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[187961.487379] r8169 0000:02:00.0 em1: link down
>[187961.487425] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[187961.928863] PM: Syncing filesystems ... done.
>[187961.931471] PM: Preparing system for mem sleep
>[187962.201692] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[187962.213102] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[187962.224097] PM: Entering mem sleep
>[187962.224123] Suspending console(s) (use no_console_suspend to debug)
>[187962.224500] r8712: suspending...
>[187962.224672] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[187962.224831] sd 0:0:0:0: [sda] Stopping disk
>[187962.259893] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[187962.259926] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[187962.260039] serial 00:06: disabled
>[187962.260127] serial 00:05: disabled
>[187962.262012] ACPI handle has no context!
>[187963.114907] PM: suspend of devices complete after 890.746 msecs
>[187963.115124] PM: late suspend of devices complete after 0.214 msecs
>[187963.115284] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[187963.125906] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[187963.125998] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[187963.136869] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[187963.136892] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[187963.136924] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[187963.147867] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[187963.147890] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[187963.147971] PM: noirq suspend of devices complete after 32.848 msecs
>[187963.148009] ACPI: Preparing to enter system sleep state S3
>[187963.156044] PM: Saving platform NVS memory
>[187963.156230] Disabling non-boot CPUs ...
>[187963.156583] Broke affinity for irq 16
>[187963.156591] Broke affinity for irq 22
>[187963.157649] smpboot: CPU 1 is now offline
>[187963.157945] CPU 1 offline: Remove Rx thread
>[187963.158365] Broke affinity for irq 17
>[187963.159401] smpboot: CPU 2 is now offline
>[187963.159653] CPU 2 offline: Remove Rx thread
>[187963.160023] ACPI: Low-level resume complete
>[187963.160059] PM: Restoring platform NVS memory
>[187963.160123] PCI-DMA: Resuming GART IOMMU
>[187963.160124] PCI-DMA: Restoring GART aperture settings
>[187963.160372] LVT offset 0 assigned for vector 0xf9
>[187963.160378] microcode: CPU0: new patch_level=0x010000db
>[187963.160410] Enabling non-boot CPUs ...
>[187963.160475] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[187963.171509] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[187963.171510] perf: IBS APIC setup failed on cpu #1
>[187963.173892] microcode: CPU1: new patch_level=0x010000db
>[187963.173901] bnx2i: CPU 1 online: Create Rx thread
>[187963.173947] CPU1 is up
>[187963.173985] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[187963.185019] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[187963.185021] perf: IBS APIC setup failed on cpu #2
>[187963.187382] microcode: CPU2: new patch_level=0x010000db
>[187963.187389] bnx2i: CPU 2 online: Create Rx thread
>[187963.187446] CPU2 is up
>[187963.187928] ACPI: Waking up from system sleep state S3
>[187963.214423] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[187963.214446] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[187963.225401] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[187963.225429] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[187963.225451] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[187963.236400] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[187963.247456] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[187963.291507] PM: noirq resume of devices complete after 87.980 msecs
>[187963.291674] PM: early resume of devices complete after 0.138 msecs
>[187963.292030] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[187963.292099] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[187963.292456] serial 00:05: activated
>[187963.292893] serial 00:06: activated
>[187963.292928] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[187963.293327] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[187963.293328] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[187963.307211] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[187963.307266] radeon 0000:01:00.0: WB enabled
>[187963.307268] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[187963.353413] [drm] ring test on 0 succeeded in 0 usecs
>[187963.353434] [drm] ib test on ring 0 succeeded in 0 usecs
>[187963.363593] r8169 0000:02:00.0 em1: link down
>[187963.507737] r8712: resuming...
>[187963.535320] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[187963.597334] ata6: SATA link down (SStatus 0 SControl 300)
>[187963.597380] ata4: SATA link down (SStatus 0 SControl 300)
>[187963.597415] ata5: SATA link down (SStatus 0 SControl 300)
>[187963.597444] ata3: SATA link down (SStatus 0 SControl 300)
>[187963.752282] ata2: softreset failed (device not ready)
>[187963.752284] ata2: applying PMP SRST workaround and retrying
>[187963.854278] firewire_core 0000:03:00.0: rediscovered device fw0
>[187963.907271] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[187963.913908] ata2.00: configured for UDMA/100
>[187964.980910] r8169 0000:02:00.0 em1: link up
>[187964.980917] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[187971.656045] ata1: softreset failed (device not ready)
>[187971.656047] ata1: applying PMP SRST workaround and retrying
>[187971.811035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[187971.837999] ata1.00: configured for UDMA/133
>[187971.838084] sd 0:0:0:0: [sda] Starting disk
>[187971.861912] PM: resume of devices complete after 8571.578 msecs
>[187971.871264] PM: Finishing wakeup.
>[187971.871265] Restarting tasks ... done.
>[187974.184159] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[189573.875805] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[189574.197859] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[189574.325613] r8169 0000:02:00.0 em1: link down
>[189574.325663] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[189574.328114] r8169 0000:02:00.0 em1: link down
>[189574.412821] r8169 0000:02:00.0 em1: link down
>[189574.412867] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[189574.800938] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[189574.955518] r8169 0000:02:00.0 em1: link down
>[189574.955564] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[189575.349332] PM: Syncing filesystems ... done.
>[189575.352135] PM: Preparing system for mem sleep
>[189575.614898] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[189575.626249] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[189575.637266] PM: Entering mem sleep
>[189575.637295] Suspending console(s) (use no_console_suspend to debug)
>[189575.637707] r8712: suspending...
>[189575.637840] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[189575.637996] sd 0:0:0:0: [sda] Stopping disk
>[189575.679452] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[189575.679485] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[189575.679594] serial 00:06: disabled
>[189575.679682] serial 00:05: disabled
>[189575.681138] ACPI handle has no context!
>[189576.537044] PM: suspend of devices complete after 899.714 msecs
>[189576.537260] PM: late suspend of devices complete after 0.212 msecs
>[189576.537420] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[189576.548043] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[189576.548133] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[189576.559008] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[189576.559030] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[189576.559060] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[189576.570007] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[189576.570029] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[189576.570109] PM: noirq suspend of devices complete after 32.849 msecs
>[189576.570148] ACPI: Preparing to enter system sleep state S3
>[189576.578185] PM: Saving platform NVS memory
>[189576.578373] Disabling non-boot CPUs ...
>[189576.578727] Broke affinity for irq 16
>[189576.578734] Broke affinity for irq 22
>[189576.579795] smpboot: CPU 1 is now offline
>[189576.580102] CPU 1 offline: Remove Rx thread
>[189576.580484] Broke affinity for irq 17
>[189576.580490] Broke affinity for irq 18
>[189576.581523] smpboot: CPU 2 is now offline
>[189576.581793] CPU 2 offline: Remove Rx thread
>[189576.582155] ACPI: Low-level resume complete
>[189576.582191] PM: Restoring platform NVS memory
>[189576.582249] PCI-DMA: Resuming GART IOMMU
>[189576.582249] PCI-DMA: Restoring GART aperture settings
>[189576.582497] LVT offset 0 assigned for vector 0xf9
>[189576.582503] microcode: CPU0: new patch_level=0x010000db
>[189576.582520] Enabling non-boot CPUs ...
>[189576.582599] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[189576.593634] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[189576.593635] perf: IBS APIC setup failed on cpu #1
>[189576.596011] microcode: CPU1: new patch_level=0x010000db
>[189576.596019] bnx2i: CPU 1 online: Create Rx thread
>[189576.596067] CPU1 is up
>[189576.596105] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[189576.607140] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[189576.607141] perf: IBS APIC setup failed on cpu #2
>[189576.609492] microcode: CPU2: new patch_level=0x010000db
>[189576.609500] bnx2i: CPU 2 online: Create Rx thread
>[189576.609549] CPU2 is up
>[189576.610026] ACPI: Waking up from system sleep state S3
>[189576.637552] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[189576.637575] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[189576.648532] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[189576.648559] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[189576.648581] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[189576.659530] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[189576.670582] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[189576.714633] PM: noirq resume of devices complete after 87.975 msecs
>[189576.714802] PM: early resume of devices complete after 0.139 msecs
>[189576.715550] serial 00:05: activated
>[189576.715553] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[189576.715615] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[189576.715983] serial 00:06: activated
>[189576.716019] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[189576.716430] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[189576.716431] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[189576.728482] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[189576.728536] radeon 0000:01:00.0: WB enabled
>[189576.728539] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[189576.774648] [drm] ring test on 0 succeeded in 1 usecs
>[189576.774665] [drm] ib test on ring 0 succeeded in 0 usecs
>[189576.785726] r8169 0000:02:00.0 em1: link down
>[189576.963654] r8712: resuming...
>[189576.991458] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[189577.020472] ata3: SATA link down (SStatus 0 SControl 300)
>[189577.020507] ata5: SATA link down (SStatus 0 SControl 300)
>[189577.020536] ata4: SATA link down (SStatus 0 SControl 300)
>[189577.022455] ata6: SATA link down (SStatus 0 SControl 300)
>[189577.175408] ata2: softreset failed (device not ready)
>[189577.175410] ata2: applying PMP SRST workaround and retrying
>[189577.269418] firewire_core 0000:03:00.0: rediscovered device fw0
>[189577.330398] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[189577.336538] ata2.00: configured for UDMA/100
>[189578.519839] r8169 0000:02:00.0 em1: link up
>[189578.519847] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[189585.079197] ata1: softreset failed (device not ready)
>[189585.079200] ata1: applying PMP SRST workaround and retrying
>[189585.234167] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[189585.265017] ata1.00: configured for UDMA/133
>[189585.265090] sd 0:0:0:0: [sda] Starting disk
>[189585.288896] PM: resume of devices complete after 8575.426 msecs
>[189585.298238] PM: Finishing wakeup.
>[189585.298239] Restarting tasks ... done.
>[189587.597682] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[199294.547513] r8169 0000:02:00.0 em1: link down
>[199294.547555] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[199294.547770] r8169 0000:02:00.0 em1: link down
>[199296.096988] r8169 0000:02:00.0 em1: link up
>[199296.097017] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[199296.663622] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[199296.677955] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[199297.369312] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[199297.553034] r8169 0000:02:00.0 em1: link down
>[199297.553082] r8169 0000:02:00.0 em1: link down
>[199297.553221] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[199297.974111] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[199298.141001] r8169 0000:02:00.0 em1: link down
>[199298.141083] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[199298.561040] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[199298.736853] r8169 0000:02:00.0 em1: link down
>[199298.737018] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[199299.344191] PM: Syncing filesystems ... done.
>[199299.664902] PM: Preparing system for mem sleep
>[199299.756290] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[199299.767529] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[199299.778528] PM: Entering mem sleep
>[199299.778557] Suspending console(s) (use no_console_suspend to debug)
>[199299.778982] r8712: suspending...
>[199299.779102] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[199299.779257] sd 0:0:0:0: [sda] Stopping disk
>[199299.817729] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[199299.817763] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[199299.817864] serial 00:06: disabled
>[199299.817950] serial 00:05: disabled
>[199299.819444] ACPI handle has no context!
>[199300.672295] PM: suspend of devices complete after 893.696 msecs
>[199300.672511] PM: late suspend of devices complete after 0.213 msecs
>[199300.672669] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[199300.683323] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[199300.683413] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[199300.694285] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[199300.694307] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[199300.694337] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[199300.705283] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[199300.705305] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[199300.705386] PM: noirq suspend of devices complete after 32.877 msecs
>[199300.705424] ACPI: Preparing to enter system sleep state S3
>[199300.713474] PM: Saving platform NVS memory
>[199300.713652] Disabling non-boot CPUs ...
>[199300.714008] Broke affinity for irq 16
>[199300.715050] smpboot: CPU 1 is now offline
>[199300.715348] CPU 1 offline: Remove Rx thread
>[199300.715740] Broke affinity for irq 17
>[199300.715747] Broke affinity for irq 22
>[199300.716776] smpboot: CPU 2 is now offline
>[199300.717063] CPU 2 offline: Remove Rx thread
>[199300.717439] ACPI: Low-level resume complete
>[199300.717475] PM: Restoring platform NVS memory
>[199300.717534] PCI-DMA: Resuming GART IOMMU
>[199300.717534] PCI-DMA: Restoring GART aperture settings
>[199300.717783] LVT offset 0 assigned for vector 0xf9
>[199300.717789] microcode: CPU0: new patch_level=0x010000db
>[199300.717806] Enabling non-boot CPUs ...
>[199300.717888] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[199300.728923] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[199300.728924] perf: IBS APIC setup failed on cpu #1
>[199300.731309] microcode: CPU1: new patch_level=0x010000db
>[199300.731316] bnx2i: CPU 1 online: Create Rx thread
>[199300.731363] CPU1 is up
>[199300.731401] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[199300.742435] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[199300.742436] perf: IBS APIC setup failed on cpu #2
>[199300.744800] microcode: CPU2: new patch_level=0x010000db
>[199300.744807] bnx2i: CPU 2 online: Create Rx thread
>[199300.744853] CPU2 is up
>[199300.745331] ACPI: Waking up from system sleep state S3
>[199300.772837] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[199300.772860] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[199300.783816] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[199300.783845] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[199300.783867] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[199300.794814] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[199300.805868] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[199300.849917] PM: noirq resume of devices complete after 87.975 msecs
>[199300.850084] PM: early resume of devices complete after 0.137 msecs
>[199300.850400] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[199300.850442] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[199300.850976] serial 00:05: activated
>[199300.851385] serial 00:06: activated
>[199300.851421] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[199300.851694] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[199300.851694] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[199300.863701] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[199300.863779] radeon 0000:01:00.0: WB enabled
>[199300.863782] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[199300.909890] [drm] ring test on 0 succeeded in 1 usecs
>[199300.909907] [drm] ib test on ring 0 succeeded in 0 usecs
>[199300.921008] r8169 0000:02:00.0 em1: link down
>[199301.067009] r8712: resuming...
>[199301.093733] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[199301.155748] ata5: SATA link down (SStatus 0 SControl 300)
>[199301.155816] ata6: SATA link down (SStatus 0 SControl 300)
>[199301.155849] ata3: SATA link down (SStatus 0 SControl 300)
>[199301.155878] ata4: SATA link down (SStatus 0 SControl 300)
>[199301.310692] ata2: softreset failed (device not ready)
>[199301.310694] ata2: applying PMP SRST workaround and retrying
>[199301.404696] firewire_core 0000:03:00.0: rediscovered device fw0
>[199301.465685] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[199301.471830] ata2.00: configured for UDMA/100
>[199302.539204] r8169 0000:02:00.0 em1: link up
>[199302.539212] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[199309.265453] ata1: softreset failed (device not ready)
>[199309.265455] ata1: applying PMP SRST workaround and retrying
>[199309.420443] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[199309.448424] ata1.00: configured for UDMA/133
>[199309.448510] sd 0:0:0:0: [sda] Starting disk
>[199309.472362] PM: resume of devices complete after 8623.623 msecs
>[199309.481703] PM: Finishing wakeup.
>[199309.481704] Restarting tasks ... done.
>[199311.950870] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[201001.446055] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[201001.777121] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[201001.915882] r8169 0000:02:00.0 em1: link down
>[201001.915904] r8169 0000:02:00.0 em1: link down
>[201001.916203] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[201002.006792] r8169 0000:02:00.0 em1: link down
>[201002.006830] r8169 0000:02:00.0 em1: link down
>[201002.006967] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[201002.425986] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[201002.598724] r8169 0000:02:00.0 em1: link down
>[201002.598873] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[201003.212341] PM: Syncing filesystems ... done.
>[201003.213758] PM: Preparing system for mem sleep
>[201003.286100] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[201003.297447] Freezing remaining freezable tasks ... (elapsed 0.56 seconds) done.
>[201003.858355] PM: Entering mem sleep
>[201003.858382] Suspending console(s) (use no_console_suspend to debug)
>[201003.858801] r8712: suspending...
>[201003.858937] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[201003.859085] sd 0:0:0:0: [sda] Stopping disk
>[201003.895085] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[201003.895119] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[201003.895264] serial 00:06: disabled
>[201003.895351] serial 00:05: disabled
>[201003.897278] ACPI handle has no context!
>[201004.766125] PM: suspend of devices complete after 907.712 msecs
>[201004.766342] PM: late suspend of devices complete after 0.213 msecs
>[201004.766501] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[201004.777157] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[201004.777249] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[201004.788122] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[201004.788145] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[201004.788175] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[201004.799121] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[201004.799144] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[201004.799224] PM: noirq suspend of devices complete after 32.881 msecs
>[201004.799262] ACPI: Preparing to enter system sleep state S3
>[201004.807304] PM: Saving platform NVS memory
>[201004.807485] Disabling non-boot CPUs ...
>[201004.807840] Broke affinity for irq 16
>[201004.807847] Broke affinity for irq 22
>[201004.808889] smpboot: CPU 1 is now offline
>[201004.809193] CPU 1 offline: Remove Rx thread
>[201004.809585] Broke affinity for irq 17
>[201004.809591] Broke affinity for irq 18
>[201004.810626] smpboot: CPU 2 is now offline
>[201004.810953] CPU 2 offline: Remove Rx thread
>[201004.811333] ACPI: Low-level resume complete
>[201004.811369] PM: Restoring platform NVS memory
>[201004.811434] PCI-DMA: Resuming GART IOMMU
>[201004.811434] PCI-DMA: Restoring GART aperture settings
>[201004.811683] LVT offset 0 assigned for vector 0xf9
>[201004.811689] microcode: CPU0: new patch_level=0x010000db
>[201004.811712] Enabling non-boot CPUs ...
>[201004.811780] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[201004.822815] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[201004.822816] perf: IBS APIC setup failed on cpu #1
>[201004.825207] microcode: CPU1: new patch_level=0x010000db
>[201004.825216] bnx2i: CPU 1 online: Create Rx thread
>[201004.825261] CPU1 is up
>[201004.825299] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[201004.836334] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[201004.836335] perf: IBS APIC setup failed on cpu #2
>[201004.838676] microcode: CPU2: new patch_level=0x010000db
>[201004.838684] bnx2i: CPU 2 online: Create Rx thread
>[201004.838731] CPU2 is up
>[201004.839208] ACPI: Waking up from system sleep state S3
>[201004.866680] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[201004.866703] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[201004.877660] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[201004.877688] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[201004.877710] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[201004.888658] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[201004.899739] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[201004.943759] PM: noirq resume of devices complete after 87.976 msecs
>[201004.943926] PM: early resume of devices complete after 0.137 msecs
>[201004.944239] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[201004.944256] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[201004.945511] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[201004.945512] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[201004.946677] serial 00:05: activated
>[201004.947044] serial 00:06: activated
>[201004.947079] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[201004.959180] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[201004.959239] radeon 0000:01:00.0: WB enabled
>[201004.959242] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[201005.005370] [drm] ring test on 0 succeeded in 1 usecs
>[201005.005386] [drm] ib test on ring 0 succeeded in 0 usecs
>[201005.017844] r8169 0000:02:00.0 em1: link down
>[201005.160440] r8712: resuming...
>[201005.187578] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[201005.248584] ata6: SATA link down (SStatus 0 SControl 300)
>[201005.248622] ata4: SATA link down (SStatus 0 SControl 300)
>[201005.250599] ata5: SATA link down (SStatus 0 SControl 300)
>[201005.250655] ata3: SATA link down (SStatus 0 SControl 300)
>[201005.405537] ata2: softreset failed (device not ready)
>[201005.405540] ata2: applying PMP SRST workaround and retrying
>[201005.505547] firewire_core 0000:03:00.0: rediscovered device fw0
>[201005.560524] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[201005.566969] ata2.00: configured for UDMA/100
>[201006.611812] r8169 0000:02:00.0 em1: link up
>[201006.611819] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[201013.309328] ata1: softreset failed (device not ready)
>[201013.309330] ata1: applying PMP SRST workaround and retrying
>[201013.464311] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[201013.489921] ata1.00: configured for UDMA/133
>[201013.490028] sd 0:0:0:0: [sda] Starting disk
>[201013.513841] PM: resume of devices complete after 8571.230 msecs
>[201013.523196] PM: Finishing wakeup.
>[201013.523198] Restarting tasks ... done.
>[201016.716202] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[203173.354418] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[203173.681427] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[203173.820266] r8169 0000:02:00.0 em1: link down
>[203173.820323] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[203173.820607] r8169 0000:02:00.0 em1: link down
>[203173.909256] r8169 0000:02:00.0 em1: link down
>[203173.909336] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[203174.332360] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[203174.478148] r8169 0000:02:00.0 em1: link down
>[203174.478197] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[203174.845518] PM: Syncing filesystems ... done.
>[203174.847194] PM: Preparing system for mem sleep
>[203174.924834] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[203174.936890] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[203174.947883] PM: Entering mem sleep
>[203174.947910] Suspending console(s) (use no_console_suspend to debug)
>[203174.948333] r8712: suspending...
>[203174.948467] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[203174.981553] sd 0:0:0:0: [sda] Stopping disk
>[203174.986790] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[203174.986826] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[203174.986994] serial 00:06: disabled
>[203174.987084] serial 00:05: disabled
>[203174.988802] ACPI handle has no context!
>[203175.870665] PM: suspend of devices complete after 922.727 msecs
>[203175.870880] PM: late suspend of devices complete after 0.212 msecs
>[203175.871038] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[203175.881703] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[203175.881794] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[203175.892643] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[203175.892666] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[203175.892696] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[203175.903642] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[203175.903665] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[203175.903746] PM: noirq suspend of devices complete after 32.864 msecs
>[203175.903785] ACPI: Preparing to enter system sleep state S3
>[203175.911827] PM: Saving platform NVS memory
>[203175.912002] Disabling non-boot CPUs ...
>[203175.912364] Broke affinity for irq 16
>[203175.912371] Broke affinity for irq 22
>[203175.913423] smpboot: CPU 1 is now offline
>[203175.913696] CPU 1 offline: Remove Rx thread
>[203175.914117] Broke affinity for irq 17
>[203175.915152] smpboot: CPU 2 is now offline
>[203175.915385] CPU 2 offline: Remove Rx thread
>[203175.915756] ACPI: Low-level resume complete
>[203175.915791] PM: Restoring platform NVS memory
>[203175.915852] PCI-DMA: Resuming GART IOMMU
>[203175.915852] PCI-DMA: Restoring GART aperture settings
>[203175.916101] LVT offset 0 assigned for vector 0xf9
>[203175.916107] microcode: CPU0: new patch_level=0x010000db
>[203175.916141] Enabling non-boot CPUs ...
>[203175.916207] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[203175.927241] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[203175.927242] perf: IBS APIC setup failed on cpu #1
>[203175.929630] microcode: CPU1: new patch_level=0x010000db
>[203175.929638] bnx2i: CPU 1 online: Create Rx thread
>[203175.929684] CPU1 is up
>[203175.929722] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[203175.940756] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[203175.940757] perf: IBS APIC setup failed on cpu #2
>[203175.943089] microcode: CPU2: new patch_level=0x010000db
>[203175.943096] bnx2i: CPU 2 online: Create Rx thread
>[203175.943158] CPU2 is up
>[203175.943630] ACPI: Waking up from system sleep state S3
>[203175.969197] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[203175.969219] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[203175.980175] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[203175.980202] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[203175.980224] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[203175.991173] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[203176.002229] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[203176.046281] PM: noirq resume of devices complete after 87.984 msecs
>[203176.046447] PM: early resume of devices complete after 0.138 msecs
>[203176.046789] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[203176.046941] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[203176.047307] serial 00:05: activated
>[203176.047728] serial 00:06: activated
>[203176.047764] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[203176.048088] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[203176.048093] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[203176.060077] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[203176.060153] radeon 0000:01:00.0: WB enabled
>[203176.060155] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[203176.106265] [drm] ring test on 0 succeeded in 1 usecs
>[203176.106282] [drm] ib test on ring 0 succeeded in 0 usecs
>[203176.117369] r8169 0000:02:00.0 em1: link down
>[203176.262949] r8712: resuming...
>[203176.290099] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[203176.352098] ata6: SATA link down (SStatus 0 SControl 300)
>[203176.352138] ata4: SATA link down (SStatus 0 SControl 300)
>[203176.354134] ata3: SATA link down (SStatus 0 SControl 300)
>[203176.354168] ata5: SATA link down (SStatus 0 SControl 300)
>[203176.509050] ata2: softreset failed (device not ready)
>[203176.509052] ata2: applying PMP SRST workaround and retrying
>[203176.600052] firewire_core 0000:03:00.0: rediscovered device fw0
>[203176.664042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[203176.670178] ata2.00: configured for UDMA/100
>[203177.725311] r8169 0000:02:00.0 em1: link up
>[203177.725319] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[203184.412818] ata1: softreset failed (device not ready)
>[203184.412820] ata1: applying PMP SRST workaround and retrying
>[203184.567804] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[203184.590060] ata1.00: configured for UDMA/133
>[203184.590151] sd 0:0:0:0: [sda] Starting disk
>[203184.613916] PM: resume of devices complete after 8568.806 msecs
>[203184.623258] PM: Finishing wakeup.
>[203184.623260] Restarting tasks ... done.
>[203186.926308] r8712u: in r8711_wx_set_scan: bDriverStopped=1
>[205042.973385] X invoked oom-killer: gfp_mask=0x201da, order=0, oom_score_adj=0
>[205042.973391] X cpuset=/ mems_allowed=0
>[205042.973395] Pid: 2594, comm: X Tainted: GF        C O 3.7.8-202.fc18.x86_64 #1
>[205042.973397] Call Trace:
>[205042.973405]  [<ffffffff810d2db1>] ? cpuset_print_task_mems_allowed+0x91/0xa0
>[205042.973410]  [<ffffffff8162e351>] dump_header+0x79/0x1b3
>[205042.973413]  [<ffffffff812ecae3>] ? ___ratelimit+0xa3/0x120
>[205042.973417]  [<ffffffff811337f7>] oom_kill_process+0x1c7/0x310
>[205042.973421]  [<ffffffff8106ad35>] ? has_ns_capability_noaudit+0x15/0x20
>[205042.973423]  [<ffffffff8106ad57>] ? has_capability_noaudit+0x17/0x20
>[205042.973426]  [<ffffffff81133fc7>] out_of_memory+0x437/0x470
>[205042.973429]  [<ffffffff81139a0e>] __alloc_pages_nodemask+0x83e/0x990
>[205042.973432]  [<ffffffff811766a0>] alloc_pages_current+0xb0/0x120
>[205042.973435]  [<ffffffff8112fb07>] __page_cache_alloc+0xd7/0x100
>[205042.973437]  [<ffffffff8113031c>] ? find_get_page+0x3c/0x110
>[205042.973439]  [<ffffffff8113239a>] filemap_fault+0x2aa/0x480
>[205042.973442]  [<ffffffff81156a91>] __do_fault+0x71/0x550
>[205042.973445]  [<ffffffff81085e79>] ? enqueue_hrtimer+0x29/0x90
>[205042.973448]  [<ffffffff81159b15>] handle_pte_fault+0x95/0xb10
>[205042.973450]  [<ffffffff8107133f>] ? recalc_sigpending+0x1f/0x70
>[205042.973452]  [<ffffffff81071441>] ? dequeue_signal+0x41/0x170
>[205042.973455]  [<ffffffff8115aed1>] handle_mm_fault+0x261/0x330
>[205042.973458]  [<ffffffff8163afe2>] __do_page_fault+0x172/0x4e0
>[205042.973461]  [<ffffffff810dcaac>] ? __audit_syscall_exit+0x3ec/0x450
>[205042.973463]  [<ffffffff8163b35e>] do_page_fault+0xe/0x10
>[205042.973467]  [<ffffffff81637998>] page_fault+0x28/0x30
>[205042.973468] Mem-Info:
>[205042.973470] Node 0 DMA per-cpu:
>[205042.973472] CPU    0: hi:    0, btch:   1 usd:   0
>[205042.973473] CPU    1: hi:    0, btch:   1 usd:   0
>[205042.973475] CPU    2: hi:    0, btch:   1 usd:   0
>[205042.973476] Node 0 DMA32 per-cpu:
>[205042.973477] CPU    0: hi:  186, btch:  31 usd:   0
>[205042.973479] CPU    1: hi:  186, btch:  31 usd:   0
>[205042.973480] CPU    2: hi:  186, btch:  31 usd:   0
>[205042.973481] Node 0 Normal per-cpu:
>[205042.973482] CPU    0: hi:  186, btch:  31 usd:   0
>[205042.973483] CPU    1: hi:  186, btch:  31 usd:   0
>[205042.973484] CPU    2: hi:  186, btch:  31 usd:   0
>[205042.973488] active_anon:688093 inactive_anon:976832 isolated_anon:0
> active_file:357 inactive_file:445 isolated_file:32
> unevictable:875 dirty:0 writeback:13 unstable:0
> free:25616 slab_reclaimable:13484 slab_unreclaimable:57667
> mapped:14200 shmem:989697 pagetables:28001 bounce:0
> free_cma:0
>[205042.973491] Node 0 DMA free:15900kB min:128kB low:160kB high:192kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15652kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:8kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
>[205042.973496] lowmem_reserve[]: 0 3246 8034 8034
>[205042.973498] Node 0 DMA32 free:46368kB min:27256kB low:34068kB high:40884kB active_anon:1336504kB inactive_anon:1140904kB active_file:1216kB inactive_file:1788kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3324864kB mlocked:0kB dirty:0kB writeback:36kB mapped:15840kB shmem:1144328kB slab_reclaimable:18528kB slab_unreclaimable:63108kB kernel_stack:520kB pagetables:9852kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:5131 all_unreclaimable? yes
>[205042.973503] lowmem_reserve[]: 0 0 4788 4788
>[205042.973505] Node 0 Normal free:40196kB min:40196kB low:50244kB high:60292kB active_anon:1415868kB inactive_anon:2766424kB active_file:212kB inactive_file:136kB unevictable:3500kB isolated(anon):0kB isolated(file):0kB present:4902912kB mlocked:3500kB dirty:0kB writeback:16kB mapped:40960kB shmem:2814460kB slab_reclaimable:35408kB slab_unreclaimable:167552kB kernel_stack:4360kB pagetables:102152kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:20164 all_unreclaimable? yes
>[205042.973509] lowmem_reserve[]: 0 0 0 0
>[205042.973511] Node 0 DMA: 1*4kB 1*8kB 1*16kB 0*32kB 2*64kB 1*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 3*4096kB = 15900kB
>[205042.973517] Node 0 DMA32: 1255*4kB 4547*8kB 188*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 1*2048kB 0*4096kB = 46452kB
>[205042.973522] Node 0 Normal: 1374*4kB 536*8kB 271*16kB 177*32kB 95*64kB 30*128kB 23*256kB 9*512kB 0*1024kB 0*2048kB 0*4096kB = 40200kB
>[205042.973527] 991113 total pagecache pages
>[205042.973528] 0 pages in swap cache
>[205042.973529] Swap cache stats: add 0, delete 0, find 0/0
>[205042.973530] Free swap  = 0kB
>[205042.973531] Total swap = 0kB
>[205043.004152] 2097136 pages RAM
>[205043.004155] 52736 pages reserved
>[205043.004156] 581741 pages shared
>[205043.004157] 2003437 pages non-shared
>[205043.004158] [ pid ]   uid  tgid total_vm      rss nr_ptes swapents oom_score_adj name
>[205043.004170] [  351]     0   351    11171      723      24        0         -1000 systemd-udevd
>[205043.004173] [  364]     0   364    90392     4518     172        0             0 systemd-journal
>[205043.004178] [  661]     0   661    12736      216      26        0         -1000 auditd
>[205043.004180] [  664]     0   664    20044      155       9        0             0 audispd
>[205043.004183] [  665]     0   665     5966      161      27        0             0 sedispatch
>[205043.004185] [  707]     0   707     4741      114      18        0             0 irqbalance
>[205043.004187] [  709]     0   709    35849      247      42        0             0 abrtd
>[205043.004189] [  732]     0   732     5508      317      15        0             0 smartd
>[205043.004191] [  764]     0   764    35321      197      41        0             0 abrt-watch-log
>[205043.004194] [  791]     0   791     1858       67       9        0             0 gpm
>[205043.004196] [  793]     0   793    35321      197      41        0             0 abrt-watch-log
>[205043.004198] [  794]     0   794     1611       74      11        0             0 iprupdate
>[205043.004200] [  799]     0   799     1610       73      10        0             0 iprinit
>[205043.004203] [  810]     0   810     8246      256      20        0             0 systemd-logind
>[205043.004205] [  816]     0   816    73917      247      50        0             0 accounts-daemon
>[205043.004207] [  817]     0   817    68839      482      87        0             0 NetworkManager
>[205043.004209] [  818]    70   818     7007      223      18        0             0 avahi-daemon
>[205043.004211] [  821]     0   821    64710      272      27        0             0 rsyslogd
>[205043.004213] [  822]     0   822    10856      400      22        0             0 restorecond
>[205043.004215] [  825]    81   825    25004      686      31        0          -900 dbus-daemon
>[205043.004217] [  831]   172   831    41143      204      23        0             0 rtkit-daemon
>[205043.004220] [  833]    70   833     6975       59      17        0             0 avahi-daemon
>[205043.004223] [  871]   993   871     6151      215      15        0             0 chronyd
>[205043.004225] [  872]     0   872    24696       79      15        0             0 iscsiuio
>[205043.004227] [  879]     0   879     1264      106       9        0             0 iscsid
>[205043.004229] [  880]     0   880     1389      844       9        0           -17 iscsid
>[205043.004231] [  883]     0   883     1739      177      10        0             0 mcelog
>[205043.004233] [  892]     0   892    28520      130      11        0             0 ksmtuned
>[205043.004235] [  908]     0   908     9770       28      10        0             0 iprdump
>[205043.004237] [  911]     0   911     5908      189      16        0             0 atd
>[205043.004239] [  912]     0   912    30147      323      15        0             0 crond
>[205043.004242] [  914]     0   914     6671      124      30        0             0 kdm
>[205043.004244] [  915]   999   915   121942     4330      77        0             0 polkitd
>[205043.004246] [  923]     0   923    22450      315      68        0          -900 modem-manager
>[205043.004248] [  926]     0   926     6328      230      18        0             0 bluetoothd
>[205043.004250] [ 1092]     0  1092   121533     1422     188        0             0 libvirtd
>[205043.004252] [ 1115]    32  1115     4792      136      12        0             0 rpcbind
>[205043.004254] [ 1129]     0  1129    20592      377      44        0         -1000 sshd
>[205043.004256] [ 1493]     0  1493    57690      866      80        0             0 upowerd
>[205043.004259] [ 1540]     0  1540   143955     1309      71        0             0 udisksd
>[205043.004261] [ 1559]     0  1559    27921      157      13        0             0 mount.ntfs
>[205043.004263] [ 1580]     0  1580    51848      610      55        0             0 cupsd
>[205043.004266] [ 1588]   997  1588    81793      471      74        0             0 colord
>[205043.004268] [ 1891]  1001  1891    62976      242      69        0             0 kdesud
>[205043.004270] [ 2594]     0  2594    84205    48730     200        0             0 X
>[205043.004273] [ 2597]     0  2597    31181      419      99        0             0 kdm
>[205043.004275] [ 2621]  1000  2621    27963      202      16        0             0 startkde
>[205043.004277] [ 2635]  1000  2635     3468       76      16        0             0 dbus-launch
>[205043.004279] [ 2636]  1000  2636    25005      504      26        0             0 dbus-daemon
>[205043.004282] [ 2709]  1000  2709    81597      437      72        0             0 imsettings-daem
>[205043.004284] [ 2712]  1000  2712    77349      270      60        0             0 gvfsd
>[205043.004286] [ 2716]  1000  2716    89589      702      64        0             0 gvfsd-fuse
>[205043.004288] [ 2768]  1000  2768    18358      178      36        0             0 ssh-agent
>[205043.004290] [ 2826]  1000  2826     1030       18       7        0             0 start_kdeinit
>[205043.004292] [ 2827]  1000  2827    73465      639     142        0             0 kdeinit4
>[205043.004294] [ 2828]  1000  2828    85208      658     178        0             0 klauncher
>[205043.004296] [ 2830]  1000  2830   331817    37511     521        0             0 kded4
>[205043.004298] [ 2832]  1000  2832     3478      180      17        0             0 gam_server
>[205043.004301] [ 2839]  1000  2839   107168     1409     229        0             0 kglobalaccel
>[205043.004303] [ 2843]  1000  2843   147932     1523     240        0             0 kactivitymanage
>[205043.004305] [ 2848]  1000  2848     1064       59       9        0             0 kwrapper4
>[205043.004307] [ 2849]  1000  2849   167964     1267     350        0             0 ksmserver
>[205043.004309] [ 2860]  1000  2860   794855    23820     456        0             0 kwin
>[205043.004311] [ 2872]  1000  2872   297886     5075     345        0             0 knotify4
>[205043.004314] [ 2875]  1000  2875   849766    30967     548        0             0 plasma-desktop
>[205043.004316] [ 2879]  1000  2879     3010      260      17        0             0 ksysguardd
>[205043.004318] [ 2883]  1000  2883    62510      525      54        0             0 akonadi_control
>[205043.004320] [ 2885]  1000  2885   460981     2526     127        0             0 akonadiserver
>[205043.004323] [ 2888]  1000  2888   430096     7321     107        0             0 mysqld
>[205043.004325] [ 2923]  1000  2923   255586     4306     422        0             0 krunner
>[205043.004327] [ 2924]  1000  2924   210018     1935     363        0             0 kmix
>[205043.004329] [ 2935]  1000  2935   111539     1217     204        0             0 akonadi_agent_l
>[205043.004331] [ 2936]  1000  2936   111531     1221     202        0             0 akonadi_agent_l
>[205043.004333] [ 2937]  1000  2937   111532     1202     204        0             0 akonadi_agent_l
>[205043.004335] [ 2938]  1000  2938   173291     2337     425        0             0 akonadi_archive
>[205043.004337] [ 2939]  1000  2939   109912     1209     198        0             0 akonadi_agent_l
>[205043.004348] [ 2940]  1000  2940   110568     1205     200        0             0 akonadi_agent_l
>[205043.004350] [ 2941]  1000  2941   111532     1224     204        0             0 akonadi_agent_l
>[205043.004352] [ 2942]  1000  2942   121636     1406     278        0             0 akonadi_maildis
>[205043.004354] [ 2943]  1000  2943   173288     2335     425        0             0 akonadi_mailfil
>[205043.004356] [ 2944]  1000  2944   128476     1276     241        0             0 akonadi_nepomuk
>[205043.004359] [ 2945]  1000  2945   109950     1202     197        0             0 akonadi_agent_l
>[205043.004361] [ 2955]  1000  2955   138114      854     139        0             0 pulseaudio
>[205043.004363] [ 2989]  1000  2989   167419      903     184        0             0 abrt-applet
>[205043.004365] [ 2991]  1000  2991    77729      222      86        0             0 deja-dup-monito
>[205043.004367] [ 3001]  1000  3001    85413      252      51        0             0 at-spi-bus-laun
>[205043.004369] [ 3007]  1000  3007    24496      189      28        0             0 dbus-daemon
>[205043.004371] [ 3012]  1000  3012   118134      774      76        0             0 gvfs-udisks2-vo
>[205043.004374] [ 3016]  1000  3016    32295      273      54        0             0 at-spi2-registr
>[205043.004376] [ 3019]  1000  3019    75064      541     158        0             0 seapplet
>[205043.004378] [ 3059]  1000  3059   152428     4747     258        0             0 polkit-kde-auth
>[205043.004380] [ 3076]  1000  3076   108499     1377     236        0             0 klipper
>[205043.004382] [ 3080]  1000  3080    98499      183      72        0             0 gvfs-afc-volume
>[205043.004384] [ 3085]  1000  3085    79419      245      69        0             0 gvfs-gphoto2-vo
>[205043.004387] [ 3089]  1000  3089   109302     2142     237        0             0 knemo
>[205043.004389] [ 3091]  1000  3091    66981      198      48        0             0 xsettings-kde
>[205043.004391] [ 3094]  1000  3094    64525      256      41        0             0 dconf-service
>[205043.004393] [ 3358]  1000  3358   106849     1085     229        0             0 kuiserver
>[205043.004395] [ 5003]  1000  5003    80683      254      60        0             0 gnome-keyring-d
>[205043.004398] [ 8004]  1000  8004    23552      276      80        0             0 polkit-agent-he
>[205043.004400] [ 9427]  1000  9427    84522      587     179        0             0 kio_http_cache_
>[205043.004403] [12369]  1000 12369    58224      267      57        0             0 gvfsd-metadata
>[205043.004405] [12376]  1000 12376   120280      918      82        0             0 gvfsd-http
>[205043.004407] [13470]     0 13470    77626     2372     100        0             0 wicd
>[205043.004409] [13476]     0 13476    56711     1884      94        0             0 wicd-monitor
>[205043.004411] [17783]     0 17783    73374    38551     178        0             0 X
>[205043.004414] [17789]     0 17789    31181      420      99        0             0 kdm
>[205043.004416] [19506]  1001 19506    27963      203      17        0             0 startkde
>[205043.004418] [19520]  1001 19520     3468       85      15        0             0 dbus-launch
>[205043.004420] [19521]  1001 19521    25089      525      24        0             0 dbus-daemon
>[205043.004422] [19594]  1001 19594    81627      467      71        0             0 imsettings-daem
>[205043.004425] [19597]  1001 19597    77323      222      62        0             0 gvfsd
>[205043.004427] [19603]  1001 19603    89589      189      63        0             0 gvfsd-fuse
>[205043.004429] [19654]  1001 19654    18358      176      35        0             0 ssh-agent
>[205043.004431] [19713]  1001 19713     1030       19       7        0             0 start_kdeinit
>[205043.004433] [19714]  1001 19714    73466      628     142        0             0 kdeinit4
>[205043.004435] [19715]  1001 19715    85215      632     180        0             0 klauncher
>[205043.004437] [19717]  1001 19717   314643    27799     500        0             0 kded4
>[205043.004440] [19719]  1001 19719     3511      237      16        0             0 gam_server
>[205043.004442] [19727]  1001 19727   107215     1434     229        0             0 kglobalaccel
>[205043.004444] [19731]  1001 19731   131527     1495     241        0             0 kactivitymanage
>[205043.004446] [19736]  1001 19736     1064       58       9        0             0 kwrapper4
>[205043.004448] [19737]  1001 19737   168006     1255     350        0             0 ksmserver
>[205043.004450] [19745]  1001 19745   718969     3673     372        0             0 kwin
>[205043.004453] [19752]  1001 19752   238653     3657     361        0             0 knotify4
>[205043.004455] [19756]  1001 19756   856121    23196     547        0             0 plasma-desktop
>[205043.004457] [19761]  1001 19761   105805     1062     227        0             0 kuiserver
>[205043.004459] [19764]  1001 19764     3011      265      16        0             0 ksysguardd
>[205043.004461] [19766]  1001 19766   353698     4113     450        0             0 krunner
>[205043.004464] [19771]  1001 19771    62550      577      54        0             0 akonadi_control
>[205043.004466] [19773]  1001 19773   495843     3605     138        0             0 akonadiserver
>[205043.004468] [19775]  1001 19775   430764     7040     108        0             0 mysqld
>[205043.004470] [19812]  1001 19812    94139      511     151        0             0 nepomukserver
>[205043.004472] [19815]  1001 19815   123336     1250     239        0             0 nepomukservices
>[205043.004474] [19824]  1001 19824   111567     1246     201        0             0 akonadi_agent_l
>[205043.004476] [19825]  1001 19825   111594     1255     202        0             0 akonadi_agent_l
>[205043.004478] [19826]  1001 19826   111567     1247     204        0             0 akonadi_agent_l
>[205043.004481] [19827]  1001 19827   111558     1243     202        0             0 akonadi_agent_l
>[205043.004483] [19828]  1001 19828   111560     1227     204        0             0 akonadi_agent_l
>[205043.004485] [19829]  1001 19829   173362     2417     424        0             0 akonadi_archive
>[205043.004487] [19830]  1001 19830   109942     1245     197        0             0 akonadi_agent_l
>[205043.004489] [19831]  1001 19831   110602     1226     199        0             0 akonadi_agent_l
>[205043.004491] [19832]  1001 19832   115135     1400     257        0             0 akonadi_imap_re
>[205043.004493] [19833]  1001 19833   117111     1289     222        0             0 akonadi_agent_l
>[205043.004495] [19834]  1001 19834   117111     1281     222        0             0 akonadi_agent_l
>[205043.004497] [19835]  1001 19835   117112     1288     221        0             0 akonadi_agent_l
>[205043.004499] [19836]  1001 19836   111560     1250     203        0             0 akonadi_agent_l
>[205043.004501] [19837]  1001 19837   121651     1411     279        0             0 akonadi_maildis
>[205043.004503] [19838]  1001 19838   173364     2423     424        0             0 akonadi_mailfil
>[205043.004505] [19839]  1001 19839   128503     1272     241        0             0 akonadi_nepomuk
>[205043.004508] [19840]  1001 19840   109956     1239     197        0             0 akonadi_agent_l
>[205043.004510] [19929]  1001 19929   212322     5411     442        0             0 lancelot
>[205043.004512] [19931]  1001 19931   108584     1310     234        0             0 akonaditray
>[205043.004514] [19933]  1001 19933   210181     2114     361        0             0 kmix
>[205043.004516] [19936]  1001 19936   162496     4686     370        0             0 kget
>[205043.004518] [19938]  1001 19938   142367     2066     346        0             0 kalarm
>[205043.004520] [19941]  1001 19941   107084     1226     229        0             0 nepomukcontroll
>[205043.004522] [19943]  1001 19943   106870     1212     225        0             0 bluedevil-monol
>[205043.004524] [19950]  1001 19950    92452      401     160        0             0 abrt-applet
>[205043.004527] [19953]  1001 19953   138135      929     153        0             0 pulseaudio
>[205043.004529] [19955]  1001 19955    77734      330      85        0             0 deja-dup-monito
>[205043.004531] [19999]  1001 19999    96777      801     170        0             0 seapplet
>[205043.004533] [20016]  1001 20016   150825     3114     253        0             0 polkit-kde-auth
>[205043.004536] [20128]  1001 20128   108497     1191     235        0             0 klipper
>[205043.004538] [20130]  1001 20130   110222     2028     238        0             0 knemo
>[205043.004540] [20131]  1001 20131    66987      704      48        0             0 xsettings-kde
>[205043.004542] [20139]  1001 20139    85416      712      50        0             0 at-spi-bus-laun
>[205043.004544] [20143]  1001 20143    24493      192      28        0             0 dbus-daemon
>[205043.004547] [20148]  1001 20148    32295      226      54        0             0 at-spi2-registr
>[205043.004549] [20194]  1001 20194    64586      314      41        0             0 dconf-service
>[205043.004551] [20241]  1001 20241    98499      209      72        0             0 gvfs-afc-volume
>[205043.004553] [20246]  1001 20246    79419      271      69        0             0 gvfs-gphoto2-vo
>[205043.004556] [20324]  1001 20324    37127      300      46        0             0 gconfd-2
>[205043.004558] [20425]  1001 20425   101259      829      78        0             0 gvfsd-http
>[205043.004560] [21044]  1001 21044    63241     1083     195        0             0 ffserver
>[205043.004563] [18093]  1001 18093   176018     5703     315        0             0 konsole
>[205043.004565] [29700]  1001 29700    29051      790      18        0             0 bash
>[205043.004567] [29800]  1001 29800    29022      762      16        0             0 bash
>[205043.004569] [30136]  1001 30136    29645      528      22        0             0 man
>[205043.004571] [30147]  1001 30147    27343      274      13        0             0 less
>[205043.004573] [ 6985]  1001  6985    29022      752      18        0             0 bash
>[205043.004575] [ 7183]  1001  7183    28989      719      18        0             0 bash
>[205043.004577] [ 7273]  1001  7273   457081   166220     862        0             0 seamonkey
>[205043.004580] [14096]     0 14096     3807      137      12        0             0 anacron
>[205043.004583] [14803]     0 14803    24606      480      48        0             0 sendmail
>[205043.004586] [14836]    51 14836    20872      426      39        0             0 sendmail
>[205043.004588] [14941]  1001 14941   112027     1489     244        0             0 kscreenlocker
>[205043.004591] [14960]  1000 14960   275184    46113     471        0             0 seamonkey
>[205043.004593] [15091]  1000 15091   174420     4451     363        0             0 dolphin
>[205043.004595] [15144]  1000 15144   246276    85176     471        0             0 okular
>[205043.004597] [15505]     0 15505    81295      426      88        0          -900 packagekitd
>[205043.004599] [15579]     0 15579     2752       49       8        0             0 ifconfig
>[205043.004601] Out of memory: Kill process 7273 (seamonkey) score 81 or sacrifice child
>[205043.004607] Killed process 7273 (seamonkey) total-vm:1828324kB, anon-rss:664052kB, file-rss:828kB
>[207335.895122] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[207336.222024] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[207336.381897] r8169 0000:02:00.0 em1: link down
>[207336.381907] r8169 0000:02:00.0 em1: link down
>[207336.382063] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[207336.469869] r8169 0000:02:00.0 em1: link down
>[207336.469917] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[207336.470120] r8169 0000:02:00.0 em1: link down
>[207336.886949] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[207337.058784] r8169 0000:02:00.0 em1: link down
>[207337.058830] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[207337.613524] PM: Syncing filesystems ... done.
>[207337.621575] PM: Preparing system for mem sleep
>[207337.918355] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[207337.930482] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[207337.941474] PM: Entering mem sleep
>[207337.941501] Suspending console(s) (use no_console_suspend to debug)
>[207337.941956] r8712: suspending...
>[207337.942073] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[207337.942206] sd 0:0:0:0: [sda] Stopping disk
>[207337.981752] i8042 aux 00:0b: wake-up capability disabled by ACPI
>[207337.981802] i8042 kbd 00:0a: wake-up capability enabled by ACPI
>[207337.981908] serial 00:06: disabled
>[207337.981998] serial 00:05: disabled
>[207337.983447] ACPI handle has no context!
>[207338.829262] PM: suspend of devices complete after 887.723 msecs
>[207338.829477] PM: late suspend of devices complete after 0.212 msecs
>[207338.829636] pcieport 0000:00:05.0: wake-up capability enabled by ACPI
>[207338.840261] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
>[207338.840350] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
>[207338.851225] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
>[207338.851247] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
>[207338.851277] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
>[207338.862225] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
>[207338.862247] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
>[207338.862327] PM: noirq suspend of devices complete after 32.850 msecs
>[207338.862365] ACPI: Preparing to enter system sleep state S3
>[207338.870410] PM: Saving platform NVS memory
>[207338.870600] Disabling non-boot CPUs ...
>[207338.870931] Broke affinity for irq 16
>[207338.872008] smpboot: CPU 1 is now offline
>[207338.872280] CPU 1 offline: Remove Rx thread
>[207338.872712] Broke affinity for irq 17
>[207338.872718] Broke affinity for irq 18
>[207338.872725] Broke affinity for irq 22
>[207338.873757] smpboot: CPU 2 is now offline
>[207338.874009] CPU 2 offline: Remove Rx thread
>[207338.874383] ACPI: Low-level resume complete
>[207338.874419] PM: Restoring platform NVS memory
>[207338.874480] PCI-DMA: Resuming GART IOMMU
>[207338.874480] PCI-DMA: Restoring GART aperture settings
>[207338.874729] LVT offset 0 assigned for vector 0xf9
>[207338.874736] microcode: CPU0: new patch_level=0x010000db
>[207338.874750] Enabling non-boot CPUs ...
>[207338.874827] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[207338.885862] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[207338.885863] perf: IBS APIC setup failed on cpu #1
>[207338.888244] microcode: CPU1: new patch_level=0x010000db
>[207338.888252] bnx2i: CPU 1 online: Create Rx thread
>[207338.888300] CPU1 is up
>[207338.888337] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[207338.899371] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
>[207338.899372] perf: IBS APIC setup failed on cpu #2
>[207338.901744] microcode: CPU2: new patch_level=0x010000db
>[207338.901751] bnx2i: CPU 2 online: Create Rx thread
>[207338.901801] CPU2 is up
>[207338.902294] ACPI: Waking up from system sleep state S3
>[207338.928779] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
>[207338.928801] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
>[207338.939761] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
>[207338.939789] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
>[207338.939811] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
>[207338.950759] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
>[207338.961807] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
>[207339.005861] PM: noirq resume of devices complete after 87.981 msecs
>[207339.006028] PM: early resume of devices complete after 0.137 msecs
>[207339.006366] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
>[207339.006441] pcieport 0000:00:05.0: wake-up capability disabled by ACPI
>[207339.006748] serial 00:05: activated
>[207339.007180] serial 00:06: activated
>[207339.007215] i8042 kbd 00:0a: wake-up capability disabled by ACPI
>[207339.007613] [drm] probing gen 2 caps for device 1002:5978 = 2/0
>[207339.007614] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[207339.019579] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[207339.019634] radeon 0000:01:00.0: WB enabled
>[207339.019636] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021ed66c00
>[207339.065751] [drm] ring test on 0 succeeded in 1 usecs
>[207339.065768] [drm] ib test on ring 0 succeeded in 0 usecs
>[207339.076951] r8169 0000:02:00.0 em1: link down
>[207339.222824] r8712: resuming...
>[207339.249680] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
>[207339.311682] ata3: SATA link down (SStatus 0 SControl 300)
>[207339.313711] ata5: SATA link down (SStatus 0 SControl 300)
>[207339.313746] ata6: SATA link down (SStatus 0 SControl 300)
>[207339.313780] ata4: SATA link down (SStatus 0 SControl 300)
>[207339.468632] ata2: softreset failed (device not ready)
>[207339.468635] ata2: applying PMP SRST workaround and retrying
>[207339.560638] firewire_core 0000:03:00.0: rediscovered device fw0
>[207339.623625] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[207339.629760] ata2.00: configured for UDMA/100
>[207340.695204] r8169 0000:02:00.0 em1: link up
>[207340.695212] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[207347.370403] ata1: softreset failed (device not ready)
>[207347.370406] ata1: applying PMP SRST workaround and retrying
>[207347.525393] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[207347.552664] ata1.00: configured for UDMA/133
>[207347.552750] sd 0:0:0:0: [sda] Starting disk
>[207347.576602] PM: resume of devices complete after 8571.910 msecs
>[207347.585960] PM: Finishing wakeup.
>[207347.585962] Restarting tasks ... done.
>[207350.056835] r8712u: in r8711_wx_set_scan: bDriverStopped=1

Actions: View

Attachments on bug 808008: 602243 | 602244 | 703374