Attachment 716284 Details for Bug 927460 – lspci -vvv - freia

lspci -vvv - freia

file_927460.txt (text/plain), 35.30 KB, created by Paulo Fessel on 2013-03-26 00:54:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Paulo Fessel

Created: 2013-03-26 00:54:16 UTC

Size: 35.30 KB

patch

obsolete

># lspci -vvv
>00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>        Latency: 0
>        Capabilities: [c4] HyperTransport: Slave or Primary Interface
>                Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
>                Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>                Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>                Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>                Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>                Revision ID: 3.00
>                Link Frequency 0: [a]
>                Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>                Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>                Link Frequency 1: 200MHz
>                Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>                Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>                Prefetchable memory behind bridge Upper: 00-00
>                Bus Number: 00
>        Capabilities: [54] HyperTransport: UnitID Clumping
>        Capabilities: [40] HyperTransport: Retry Mode
>        Capabilities: [9c] HyperTransport: #1a
>        Capabilities: [f8] HyperTransport: #1c
>
>00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 64
>        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>        I/O behind bridge: 00005000-00005fff
>        Memory behind bridge: d2200000-d23fffff
>        Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
>        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>        Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
>        Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx)
>
>00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>        Bus: primary=00, secondary=02, subordinate=07, sec-latency=0
>        I/O behind bridge: 00003000-00004fff
>        Memory behind bridge: d1200000-d21fffff
>        Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
>        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>        Capabilities: [50] Power Management version 3
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>                        ExtTag+ RBE+ FLReset-
>                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                        MaxPayload 128 bytes, MaxReadReq 128 bytes
>                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>                LnkCap: Port #247, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>                        ClockPM- Surprise- LLActRep+ BwNot+
>                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>                        Slot #4, PowerLimit 25.000W; Interlock- NoCompl+
>                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>                        Changed: MRL- PresDet- LinkState-
>                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>                RootCap: CRSVisible-
>                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>                DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
>                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
>                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>                         Compliance De-emphasis: -6dB
>                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
>                Address: fee0300c  Data: 4191
>        Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 30f2
>        Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
>        Capabilities: [110 v1] Virtual Channel
>                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                Arb:    Fixed- WRR32- WRR64- WRR128-
>                Ctrl:   ArbSelect=Fixed
>                Status: InProgress-
>                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>                        Status: NegoPending+ InProgress-
>        Kernel driver in use: pcieport
>
>00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>        Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
>        I/O behind bridge: 0000f000-00000fff
>        Memory behind bridge: d1100000-d11fffff
>        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>        Capabilities: [50] Power Management version 3
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>                        ExtTag+ RBE+ FLReset-
>                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                        MaxPayload 128 bytes, MaxReadReq 128 bytes
>                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>                LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>                        ClockPM- Surprise- LLActRep+ BwNot+
>                LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
>                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
>                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>                        Slot #5, PowerLimit 25.000W; Interlock- NoCompl+
>                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>                        Changed: MRL- PresDet+ LinkState+
>                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>                RootCap: CRSVisible-
>                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>                DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
>                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
>                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>                         Compliance De-emphasis: -6dB
>                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
>                Address: fee0300c  Data: 41a1
>        Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 30f2
>        Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
>        Capabilities: [110 v1] Virtual Channel
>                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                Arb:    Fixed- WRR32- WRR64- WRR128-
>                Ctrl:   ArbSelect=Fixed
>                Status: InProgress-
>                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>                        Status: NegoPending- InProgress-
>        Kernel driver in use: pcieport
>
>00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>        Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
>        I/O behind bridge: 00002000-00002fff
>        Memory behind bridge: d2500000-d25fffff
>        Prefetchable memory behind bridge: 00000000d1000000-00000000d10fffff
>        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>        Capabilities: [50] Power Management version 3
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>                        ExtTag+ RBE+ FLReset-
>                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                        MaxPayload 128 bytes, MaxReadReq 128 bytes
>                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>                LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>                        ClockPM- Surprise- LLActRep+ BwNot+
>                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
>                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>                        Slot #6, PowerLimit 25.000W; Interlock- NoCompl+
>                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>                        Changed: MRL- PresDet+ LinkState+
>                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>                RootCap: CRSVisible-
>                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>                DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
>                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
>                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>                         Compliance De-emphasis: -6dB
>                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
>                Address: fee0300c  Data: 41b1
>        Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 30f2
>        Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
>        Capabilities: [110 v1] Virtual Channel
>                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                Arb:    Fixed- WRR32- WRR64- WRR128-
>                Ctrl:   ArbSelect=Fixed
>                Status: InProgress-
>                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>                        Status: NegoPending- InProgress-
>        Kernel driver in use: pcieport
>
>00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0])
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 64, Cache Line Size: 64 bytes
>        Interrupt: pin A routed to IRQ 22
>        Region 0: I/O ports at 6038 [size=8]
>        Region 1: I/O ports at 604c [size=4]
>        Region 2: I/O ports at 6030 [size=8]
>        Region 3: I/O ports at 6048 [size=4]
>        Region 4: I/O ports at 6010 [size=16]
>        Region 5: Memory at d2408000 (32-bit, non-prefetchable) [size=1K]
>        Capabilities: [60] Power Management version 2
>                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [70] SATA HBA v1.0 InCfgSpace
>        Kernel driver in use: ahci
>
>00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 64
>        Interrupt: pin A routed to IRQ 16
>        Region 0: Memory at d2407000 (32-bit, non-prefetchable) [size=4K]
>        Kernel driver in use: ohci_hcd
>
>00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI])
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 64
>        Interrupt: pin A routed to IRQ 16
>        Region 0: Memory at d2406000 (32-bit, non-prefetchable) [size=4K]
>        Kernel driver in use: ohci_hcd
>
>00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 64, Cache Line Size: 64 bytes
>        Interrupt: pin B routed to IRQ 17
>        Region 0: Memory at d2408500 (32-bit, non-prefetchable) [size=256]
>        Capabilities: [c0] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>                Bridge: PM- B3+
>        Capabilities: [e4] Debug port: BAR=1 offset=00e0
>        Kernel driver in use: ehci-pci
>
>00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 64
>        Interrupt: pin A routed to IRQ 18
>        Region 0: Memory at d2405000 (32-bit, non-prefetchable) [size=4K]
>        Kernel driver in use: ohci_hcd
>
>00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller (prog-if 10 [OHCI])
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 64
>        Interrupt: pin A routed to IRQ 18
>        Region 0: Memory at d2404000 (32-bit, non-prefetchable) [size=4K]
>        Kernel driver in use: ohci_hcd
>
>00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 64, Cache Line Size: 64 bytes
>        Interrupt: pin B routed to IRQ 19
>        Region 0: Memory at d2408400 (32-bit, non-prefetchable) [size=256]
>        Capabilities: [c0] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>                Bridge: PM- B3+
>        Capabilities: [e4] Debug port: BAR=1 offset=00e0
>        Kernel driver in use: ehci-pci
>
>00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a)
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR+ <PERR- INTx-
>        Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
>
>00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller (prog-if 8a [Master SecP PriP])
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 64
>        Interrupt: pin A routed to IRQ 16
>        Region 0: I/O ports at 01f0 [size=8]
>        Region 1: I/O ports at 03f4
>        Region 2: I/O ports at 0170 [size=8]
>        Region 3: I/O ports at 0374
>        Region 4: I/O ports at 6000 [size=16]
>        Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
>                Address: 00000000  Data: 0000
>        Kernel driver in use: pata_atiixp
>
>00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 64
>        Interrupt: pin A routed to IRQ 16
>        Region 0: Memory at d2400000 (64-bit, non-prefetchable) [size=16K]
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>        Kernel driver in use: snd_hda_intel
>
>00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>
>00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 64
>        Bus: primary=00, secondary=80, subordinate=8f, sec-latency=64
>        I/O behind bridge: 00001000-00001fff
>        Memory behind bridge: fff00000-000fffff
>        Prefetchable memory behind bridge: fff00000-000fffff
>        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40)
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Capabilities: [80] HyperTransport: Host or Secondary Interface
>                Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
>                Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>                Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>                Revision ID: 3.00
>                Link Frequency: [a]
>                Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>                Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
>                Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
>
>00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Capabilities: [f0] Secure device <?>
>        Kernel driver in use: k10temp
>
>00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] (prog-if 00 [VGA controller])
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>        Interrupt: pin A routed to IRQ 18
>        Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
>        Region 1: I/O ports at 5000 [size=256]
>        Region 2: Memory at d2300000 (32-bit, non-prefetchable) [size=64K]
>        Region 5: Memory at d2200000 (32-bit, non-prefetchable) [size=1M]
>        Expansion ROM at <unassigned> [disabled]
>        Capabilities: [50] Power Management version 3
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
>                Address: 0000000000000000  Data: 0000
>        Kernel driver in use: radeon
>
>01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series]
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>        Interrupt: pin B routed to IRQ 19
>        Region 0: Memory at d2310000 (32-bit, non-prefetchable) [size=16K]
>        Capabilities: [50] Power Management version 3
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
>                Address: 0000000000000000  Data: 0000
>        Kernel driver in use: snd_hda_intel
>
>08:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
>        Subsystem: Hewlett-Packard Company Device 137b
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0, Cache Line Size: 64 bytes
>        Interrupt: pin A routed to IRQ 17
>        Region 0: Memory at d1100000 (64-bit, non-prefetchable) [size=64K]
>        Capabilities: [40] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
>                Address: 00000000  Data: 0000
>        Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
>                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
>                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                        MaxPayload 128 bytes, MaxReadReq 512 bytes
>                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
>                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
>                        ClockPM- Surprise- LLActRep- BwNot-
>                LnkCtl: ASPM L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
>                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>        Capabilities: [90] MSI-X: Enable- Count=1 Masked-
>                Vector table: BAR=0 offset=00000000
>                PBA: BAR=0 offset=00000000
>        Capabilities: [100 v1] Advanced Error Reporting
>                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>                AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
>        Capabilities: [140 v1] Virtual Channel
>                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                Arb:    Fixed- WRR32- WRR64- WRR128-
>                Ctrl:   ArbSelect=Fixed
>                Status: InProgress-
>                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>                        Status: NegoPending- InProgress-
>        Kernel driver in use: ath5k
>
>09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
>        Subsystem: Hewlett-Packard Company Device 30f2
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0, Cache Line Size: 64 bytes
>        Interrupt: pin A routed to IRQ 43
>        Region 0: I/O ports at 2000 [size=256]
>        Region 2: Memory at d1010000 (64-bit, prefetchable) [size=4K]
>        Region 4: Memory at d1000000 (64-bit, prefetchable) [size=64K]
>        Expansion ROM at d1020000 [disabled] [size=64K]
>        Capabilities: [40] Power Management version 3
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
>                Address: 00000000fee0300c  Data: 41d1
>        Capabilities: [70] Express (v2) Endpoint, MSI 01
>                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
>                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                        MaxPayload 128 bytes, MaxReadReq 4096 bytes
>                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
>                        ClockPM+ Surprise- LLActRep- BwNot-
>                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
>                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>                         Compliance De-emphasis: -6dB
>                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>        Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
>                Vector table: BAR=4 offset=00000000
>                PBA: BAR=4 offset=00000800
>        Capabilities: [cc] Vital Product Data
>                Unknown small resource type 00, will not decode more.
>        Capabilities: [100 v1] Advanced Error Reporting
>                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>        Capabilities: [140 v1] Virtual Channel
>                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                Arb:    Fixed- WRR32- WRR64- WRR128-
>                Ctrl:   ArbSelect=Fixed
>                Status: InProgress-
>                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>                        Status: NegoPending- InProgress-
>        Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
>        Kernel driver in use: r8169

Actions: View

Attachments on bug 927460: 716284 | 716285