Attachment 78665 Details for Bug 75123 – dmesg

dmesg

dmesg (text/plain), 6.77 KB, created by Steve Taylor on 2002-10-04 17:39:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Steve Taylor

Created: 2002-10-04 17:39:43 UTC

Size: 6.77 KB

patch

obsolete

>Linux version 2.4.18-14 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
> BIOS-e820: 000000001fffd000 - 000000001ffff000 (ACPI data)
> BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>On node 0 totalpages: 131069
>zone(0): 4096 pages.
>zone(1): 126973 pages.
>zone(2): 0 pages.
>Kernel command line: ro root=LABEL=/1 hdd=ide-scsi
>ide_setup: hdd=ide-scsi
>Initializing CPU#0
>Detected 451.024 MHz processor.
>Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
>Console: colour VGA+ 80x25
>Calibrating delay loop... 896.66 BogoMIPS
>Memory: 511460k/524276k available (1326k kernel code, 10252k reserved, 999k data, 212k init, 0k highmem)
>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
>Mount cache hash table entries: 8192 (order: 4, 65536 bytes)
>ramfs: mounted with options: <defaults>
>ramfs: max_pages=64204 max_file_pages=0 max_inodes=0 max_dentries=64204
>Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
>CPU: Before vendor init, caps: 0387f9ff 00000000 00000000, vendor = 0
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>CPU: After vendor init, caps: 0387f9ff 00000000 00000000 00000000
>CPU serial number disabled.
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
>CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
>CPU: Intel Pentium III (Katmai) stepping 02
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
>mtrr: detected mtrr type: Intel
>PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
>PCI: Using configuration type 1
>PCI: Probing PCI hardware
>Unknown bridge resource 0: assuming transparent
>PCI: Using IRQ router PIIX [8086/7110] at 00:04.0
>Limiting direct PCI/PCI transfers.
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>speakup:  initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16)
>Starting kswapd
>VFS: Diskquotas version dquot_6.5.0 initialized
>pty: 2048 Unix98 ptys configured
>Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
>ttyS0 at 0x03f8 (irq = 4) is a 16550A
>ttyS1 at 0x02f8 (irq = 3) is a 16550A
>Real Time Clock Driver v1.10e
>oprofile: mapping APIC.
>oprofile: enabled local APIC. Err code 00000000
>oprofile 0.2 loaded, major 254
>block: 992 slots per queue, batch=248
>Uniform Multi-Platform E-IDE driver Revision: 6.31
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller on PCI bus 00 dev 21
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA
>hda: SAMSUNG SV8004H, ATA DISK drive
>hdb: WDC WD136AA, ATA DISK drive
>hdd: CD-RW BCE2410IM, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>blk: queue c03c0004, I/O limit 4095Mb (mask 0xffffffff)
>blk: queue c03c0004, I/O limit 4095Mb (mask 0xffffffff)
>hda: 156368016 sectors (80060 MB) w/1945KiB Cache, CHS=9733/255/63, UDMA(33)
>blk: queue c03c0140, I/O limit 4095Mb (mask 0xffffffff)
>blk: queue c03c0140, I/O limit 4095Mb (mask 0xffffffff)
>hdb: 26564832 sectors (13601 MB) w/2048KiB Cache, CHS=1653/255/63, UDMA(33)
>ide-floppy driver 0.99.newide
>Partition check:
> hda: hda1 hda2 hda3 hda4 < hda5 >
> hdb: hdb1 hdb2 hdb3
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>NET4: Frame Diverter 0.46
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>ide-floppy driver 0.99.newide
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP, IGMP
>IP: routing cache hash table of 4096 buckets, 32Kbytes
>TCP: Hash tables configured (established 32768 bind 65536)
>Linux IP multicast router 0.06 plus PIM-SM
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>RAMDISK: Compressed image found at block 0
>Freeing initrd memory: 127k freed
>VFS: Mounted root (ext2 filesystem).
>Journalled Block Device driver loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Freeing unused kernel memory: 212k freed
>usb.c: registered new driver usbdevfs
>usb.c: registered new driver hub
>usb-uhci.c: $Revision: 1.275 $ time 13:44:31 Sep  4 2002
>usb-uhci.c: High bandwidth mode enabled
>PCI: Found IRQ 5 for device 00:04.2
>PCI: Sharing IRQ 5 with 00:09.0
>PCI: Sharing IRQ 5 with 00:0d.0
>PCI: Setting latency timer of device 00:04.2 to 64
>usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5
>usb-uhci.c: Detected 2 ports
>usb.c: new USB bus registered, assigned bus number 1
>hub.c: USB hub found
>hub.c: 2 ports detected
>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
>usb.c: registered new driver hiddev
>usb.c: registered new driver hid
>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
>hid-core.c: USB HID support drivers
>mice: PS/2 mouse device common for all mice
>EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,5), internal journal
>Adding Swap: 1052248k swap-space (priority -1)
>Adding Swap: 1052248k swap-space (priority -2)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,3), internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,67), internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,1), internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SCSI subsystem driver Revision: 1.00
>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
>  Vendor: BTC       Model: BCE2410IM         Rev: A.21
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>blk: queue c03c0004, I/O limit 4095Mb (mask 0xffffffff)
>blk: queue c03c0140, I/O limit 4095Mb (mask 0xffffffff)

Actions: View

Attachments on bug 75123: 78664 | 78665