Attachment 828854 Details for Bug 1029676 – All in one RDO Havana packtstack config file

All in one RDO Havana packtstack config file

packstack-havana-allinone-tenantnetwork=gre.cfg (text/plain), 13.50 KB, created by Rushil Chugh on 2013-11-25 19:59:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Rushil Chugh

Created: 2013-11-25 19:59:34 UTC

Size: 13.50 KB

patch

obsolete

>[general]
>
># Set to 'y' if you would like Packstack to install MySQL
>CONFIG_MYSQL_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack Image
># Service (Glance)
>CONFIG_GLANCE_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack Block
># Storage (Cinder)
>CONFIG_CINDER_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack Compute
># (Nova)
>CONFIG_NOVA_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack
># Networking (Neutron)
>CONFIG_NEUTRON_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack
># Dashboard (Horizon)
>CONFIG_HORIZON_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack Object
># Storage (Swift)
>CONFIG_SWIFT_INSTALL=n
>
># Set to 'y' if you would like Packstack to install OpenStack
># Metering (Ceilometer)
>CONFIG_CEILOMETER_INSTALL=y
>
># Set to 'y' if you would like Packstack to install Heat
>CONFIG_HEAT_INSTALL=n
>
># Set to 'y' if you would like Packstack to install the OpenStack
># Client packages. An admin "rc" file will also be installed
>CONFIG_CLIENT_INSTALL=y
>
># Comma separated list of NTP servers. Leave plain if Packstack
># should not install ntpd on instances.
>CONFIG_NTP_SERVERS=
>
># Set to 'y' if you would like Packstack to install Nagios to monitor
># openstack hosts
>CONFIG_NAGIOS_INSTALL=n
>
># Comma separated list of servers to be excluded from installation in
># case you are running Packstack the second time with the same answer
># file and don't want Packstack to touch these servers. Leave plain if
># you don't need to exclude any server.
>EXCLUDE_SERVERS=
>
># Path to a Public key to install on servers. If a usable key has not
># been installed on the remote servers the user will be prompted for a
># password and this key will be installed so the password will not be
># required again
>CONFIG_SSH_KEY=
>
># The IP address of the server on which to install MySQL
>CONFIG_MYSQL_HOST=10.19.40.14
>
># Username for the MySQL admin user
>CONFIG_MYSQL_USER=root
>
># Password for the MySQL admin user
>CONFIG_MYSQL_PW=4c765c8e5b2347c7
>
># The IP address of the server on which to install the QPID service
>CONFIG_QPID_HOST=10.19.40.14
>
># The IP address of the server on which to install Keystone
>CONFIG_KEYSTONE_HOST=10.19.40.14
>
># The password to use for the Keystone to access DB
>CONFIG_KEYSTONE_DB_PW=c99575027e1c42c8
>
># The token to use for the Keystone service api
>CONFIG_KEYSTONE_ADMIN_TOKEN=934956dfc95e41178b0299eb78a2a6d7
>
># The password to use for the Keystone admin user
>CONFIG_KEYSTONE_ADMIN_PW=dbeeb9918afb46da
>
># The password to use for the Keystone demo user
>CONFIG_KEYSTONE_DEMO_PW=2023b554da004519
>
># Kestone token format. Use either UUID or PKI
>CONFIG_KEYSTONE_TOKEN_FORMAT=PKI
>
># The IP address of the server on which to install Glance
>CONFIG_GLANCE_HOST=10.19.40.14
>
># The password to use for the Glance to access DB
>CONFIG_GLANCE_DB_PW=10c4a86cfccc4023
>
># The password to use for the Glance to authenticate with Keystone
>CONFIG_GLANCE_KS_PW=0ed98a6d4f0442d3
>
># The IP address of the server on which to install Cinder
>CONFIG_CINDER_HOST=10.19.40.14
>
># The password to use for the Cinder to access DB
>CONFIG_CINDER_DB_PW=22fd4338ff474a32
>
># The password to use for the Cinder to authenticate with Keystone
>CONFIG_CINDER_KS_PW=d2488a54403046ea
>
># The Cinder backend to use, valid options are: lvm, gluster, nfs
>CONFIG_CINDER_BACKEND=lvm
>
># Create Cinder's volumes group. This should only be done for testing
># on a proof-of-concept installation of Cinder.  This will create a
># file-backed volume group and is not suitable for production usage.
>CONFIG_CINDER_VOLUMES_CREATE=y
>
># Cinder's volumes group size. Note that actual volume size will be
># extended with 3% more space for VG metadata.
>CONFIG_CINDER_VOLUMES_SIZE=20G
>
># A single or comma separated list of gluster volume shares to mount,
># eg: ip-address:/vol-name
>CONFIG_CINDER_GLUSTER_MOUNTS=
>
># A single or comma seprated list of NFS exports to mount, eg: ip-
># address:/export-name
>CONFIG_CINDER_NFS_MOUNTS=
>
># The IP address of the server on which to install the Nova API
># service
>CONFIG_NOVA_API_HOST=10.19.40.14
>
># The IP address of the server on which to install the Nova Cert
># service
>CONFIG_NOVA_CERT_HOST=10.19.40.14
>
># The IP address of the server on which to install the Nova VNC proxy
>CONFIG_NOVA_VNCPROXY_HOST=10.19.40.14
>
># A comma separated list of IP addresses on which to install the Nova
># Compute services
>CONFIG_NOVA_COMPUTE_HOSTS=10.19.40.13,10.19.40.12
>
># The IP address of the server on which to install the Nova Conductor
># service
>CONFIG_NOVA_CONDUCTOR_HOST=10.19.40.14
>
># The password to use for the Nova to access DB
>CONFIG_NOVA_DB_PW=36eea8a9a3cc4891
>
># The password to use for the Nova to authenticate with Keystone
>CONFIG_NOVA_KS_PW=6f6adc269e6d4968
>
># The IP address of the server on which to install the Nova Scheduler
># service
>CONFIG_NOVA_SCHED_HOST=10.19.40.14
>
># The overcommitment ratio for virtual to physical CPUs. Set to 1.0
># to disable CPU overcommitment
>CONFIG_NOVA_SCHED_CPU_ALLOC_RATIO=16.0
>
># The overcommitment ratio for virtual to physical RAM. Set to 1.0 to
># disable RAM overcommitment
>CONFIG_NOVA_SCHED_RAM_ALLOC_RATIO=1.5
>
># Private interface for Flat DHCP on the Nova compute servers
>CONFIG_NOVA_COMPUTE_PRIVIF=eth91
>
># The IP address of the server on which to install the Nova Network
># service
>CONFIG_NOVA_NETWORK_HOST=
>
># Nova network manager
>CONFIG_NOVA_NETWORK_MANAGER=nova.network.manager.FlatDHCPManager
>
># Public interface on the Nova network server
>CONFIG_NOVA_NETWORK_PUBIF=eth90
>
># Private interface for network manager on the Nova network server
>CONFIG_NOVA_NETWORK_PRIVIF=eth91
>
># IP Range for network manager
>CONFIG_NOVA_NETWORK_FIXEDRANGE=192.168.32.0/22
>
># IP Range for Floating IP's
>CONFIG_NOVA_NETWORK_FLOATRANGE=10.3.4.0/22
>
># Name of the default floating pool to which the specified floating
># ranges are added to
>CONFIG_NOVA_NETWORK_DEFAULTFLOATINGPOOL=nova
>
># Automatically assign a floating IP to new instances
>CONFIG_NOVA_NETWORK_AUTOASSIGNFLOATINGIP=n
>
># First VLAN for private networks
>CONFIG_NOVA_NETWORK_VLAN_START=100
>
># Number of networks to support
>CONFIG_NOVA_NETWORK_NUMBER=1
>
># Number of addresses in each private subnet
>CONFIG_NOVA_NETWORK_SIZE=255
>
># The IP addresses of the server on which to install the Neutron
># server
>CONFIG_NEUTRON_SERVER_HOST=10.19.40.14
>
># The password to use for Neutron to authenticate with Keystone
>CONFIG_NEUTRON_KS_PW=6af4190d0c144c9e
>
># The password to use for Neutron to access DB
>CONFIG_NEUTRON_DB_PW=f23b8e48a3ea4832
>
># A comma separated list of IP addresses on which to install Neutron
># L3 agent
>CONFIG_NEUTRON_L3_HOSTS=10.19.40.12
>
># The name of the bridge that the Neutron L3 agent will use for
># external traffic, or 'provider' if using provider networks
>CONFIG_NEUTRON_L3_EXT_BRIDGE=provider
>
># A comma separated list of IP addresses on which to install Neutron
># DHCP agent
>CONFIG_NEUTRON_DHCP_HOSTS=10.19.40.13
>
># The name of the L2 plugin to be used with Neutron
>CONFIG_NEUTRON_L2_PLUGIN=openvswitch
>
># A comma separated list of IP addresses on which to install Neutron
># metadata agent
>CONFIG_NEUTRON_METADATA_HOSTS=10.19.40.13
>
># A comma separated list of IP addresses on which to install Neutron
># metadata agent
>CONFIG_NEUTRON_METADATA_PW=7aaac97739ef462c
>
># The type of network to allocate for tenant networks
>CONFIG_NEUTRON_LB_TENANT_NETWORK_TYPE=local
>
># A comma separated list of VLAN ranges for the Neutron linuxbridge
># plugin
>CONFIG_NEUTRON_LB_VLAN_RANGES=
>
># A comma separated list of interface mappings for the Neutron
># linuxbridge plugin
>CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS=
>
># Type of network to allocate for tenant networks
>CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=gre
>
># A comma separated list of VLAN ranges for the Neutron openvswitch
># plugin
>CONFIG_NEUTRON_OVS_VLAN_RANGES=physnet1
>
># A comma separated list of bridge mappings for the Neutron
># openvswitch plugin
>CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=physnet1:br-eth1
>
># A comma separated list of colon-separated OVS bridge:interface
># pairs. The interface will be added to the associated bridge.
>CONFIG_NEUTRON_OVS_BRIDGE_IFACES=br-eth1:eth1
>
># A comma separated list of tunnel ranges for the Neutron openvswitch
># plugin
>CONFIG_NEUTRON_OVS_TUNNEL_RANGES=1:1000
>
># Override the IP used for GRE tunnels on this hypervisor to the IP
># found on the specified interface (defaults to the HOST IP)
>CONFIG_NEUTRON_OVS_TUNNEL_IF=
>
># The IP address of the server on which to install the OpenStack
># client packages. An admin "rc" file will also be installed
>CONFIG_OSCLIENT_HOST=10.19.40.14
>
># The IP address of the server on which to install Horizon
>CONFIG_HORIZON_HOST=10.19.40.14
>
># To set up Horizon communication over https set this to "y"
>CONFIG_HORIZON_SSL=n
>
># PEM encoded certificate to be used for ssl on the https server,
># leave blank if one should be generated, this certificate should not
># require a passphrase
>CONFIG_SSL_CERT=
>
># Keyfile corresponding to the certificate if one was entered
>CONFIG_SSL_KEY=
>
># The IP address on which to install the Swift proxy service
># (currently only single proxy is supported)
>CONFIG_SWIFT_PROXY_HOSTS=10.19.40.14
>
># The password to use for the Swift to authenticate with Keystone
>CONFIG_SWIFT_KS_PW=177936cfdde34075
>
># A comma separated list of IP addresses on which to install the
># Swift Storage services, each entry should take the format
># <ipaddress>[/dev], for example 127.0.0.1/vdb will install /dev/vdb
># on 127.0.0.1 as a swift storage device(packstack does not create the
># filesystem, you must do this first), if /dev is omitted Packstack
># will create a loopback device for a test setup
>CONFIG_SWIFT_STORAGE_HOSTS=10.19.40.14
>
># Number of swift storage zones, this number MUST be no bigger than
># the number of storage devices configured
>CONFIG_SWIFT_STORAGE_ZONES=1
>
># Number of swift storage replicas, this number MUST be no bigger
># than the number of storage zones configured
>CONFIG_SWIFT_STORAGE_REPLICAS=1
>
># FileSystem type for storage nodes
>CONFIG_SWIFT_STORAGE_FSTYPE=ext4
>
># Whether to provision for demo usage and testing
>CONFIG_PROVISION_DEMO=n
>
># The CIDR network address for the floating IP subnet
>CONFIG_PROVISION_DEMO_FLOATRANGE=172.24.4.224/28
>
># Whether to configure tempest for testing
>CONFIG_PROVISION_TEMPEST=n
>
># The uri of the tempest git repository to use
>CONFIG_PROVISION_TEMPEST_REPO_URI=https://github.com/redhat-openstack/tempest.git
>
># The revision of the tempest git repository to use
>CONFIG_PROVISION_TEMPEST_REPO_REVISION=master
>
># Whether to configure the ovs external bridge in an all-in-one
># deployment
>CONFIG_PROVISION_ALL_IN_ONE_OVS_BRIDGE=n
>
># The IP address of the server on which to install Heat service
>CONFIG_HEAT_HOST=10.19.40.14
>
># The password used by Heat user to authenticate against MySQL
>CONFIG_HEAT_DB_PW=eede1d0b692048a3
>
># The password to use for the Heat to authenticate with Keystone
>CONFIG_HEAT_KS_PW=8b51b845a18642da
>
># Set to 'y' if you would like Packstack to install Heat CloudWatch
># API
>CONFIG_HEAT_CLOUDWATCH_INSTALL=n
>
># Set to 'y' if you would like Packstack to install Heat
># CloudFormation API
>CONFIG_HEAT_CFN_INSTALL=n
>
># The IP address of the server on which to install Heat CloudWatch
># API service
>CONFIG_HEAT_CLOUDWATCH_HOST=10.19.40.14
>
># The IP address of the server on which to install Heat
># CloudFormation API service
>CONFIG_HEAT_CFN_HOST=10.19.40.14
>
># The IP address of the server on which to install Ceilometer
>CONFIG_CEILOMETER_HOST=10.19.40.14
>
># Secret key for signing metering messages.
>CONFIG_CEILOMETER_SECRET=b964221b917a4ac4
>
># The password to use for Ceilometer to authenticate with Keystone
>CONFIG_CEILOMETER_KS_PW=30b7c213d3b84288
>
># To subscribe each server to EPEL enter "y"
>CONFIG_USE_EPEL=y
>
># A comma separated list of URLs to any additional yum repositories
># to install
>CONFIG_REPO=
>
># To subscribe each server with Red Hat subscription manager, include
># this with CONFIG_RH_PW
>CONFIG_RH_USER=
>
># To subscribe each server with Red Hat subscription manager, include
># this with CONFIG_RH_USER
>CONFIG_RH_PW=
>
># To subscribe each server to Red Hat Enterprise Linux 6 Server Beta
># channel (only needed for Preview versions of RHOS) enter "y"
>CONFIG_RH_BETA_REPO=n
>
># To subscribe each server with RHN Satellite,fill Satellite's URL
># here. Note that either satellite's username/password or activation
># key has to be provided
>CONFIG_SATELLITE_URL=
>
># Username to access RHN Satellite
>CONFIG_SATELLITE_USER=
>
># Password to access RHN Satellite
>CONFIG_SATELLITE_PW=
>
># Activation key for subscription to RHN Satellite
>CONFIG_SATELLITE_AKEY=
>
># Specify a path or URL to a SSL CA certificate to use
>CONFIG_SATELLITE_CACERT=
>
># If required specify the profile name that should be used as an
># identifier for the system in RHN Satellite
>CONFIG_SATELLITE_PROFILE=
>
># Comma separated list of flags passed to rhnreg_ks. Valid flags are:
># novirtinfo, norhnsd, nopackages
>CONFIG_SATELLITE_FLAGS=
>
># Specify a HTTP proxy to use with RHN Satellite
>CONFIG_SATELLITE_PROXY=
>
># Specify a username to use with an authenticated HTTP proxy
>CONFIG_SATELLITE_PROXY_USER=
>
># Specify a password to use with an authenticated HTTP proxy.
>CONFIG_SATELLITE_PROXY_PW=
>
># The IP address of the server on which to install the Nagios server
>CONFIG_NAGIOS_HOST=10.19.40.14
>
># The password of the nagiosadmin user on the Nagios server
>CONFIG_NAGIOS_PW=a98affc97714406e

Actions: View

Attachments on bug 1029676: 828854 | 829443 | 829445