Attachment 838795 Details for Bug 999131 – httpd.conf file

httpd.conf file

httpd.conf (text/plain), 11.54 KB, created by John Griffiths on 2013-12-19 08:07:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: John Griffiths

Created: 2013-12-19 08:07:44 UTC

Size: 11.54 KB

patch

obsolete

>#
># This is the main Apache HTTP server configuration file.  It contains the
># configuration directives that give the server its instructions.
># See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
># In particular, see 
># <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
># for a discussion of each configuration directive.
>#
># Do NOT simply read the instructions in here without understanding
># what they do.  They're here only as hints or reminders.  If you are unsure
># consult the online docs. You have been warned.  
>#
># Configuration and logfile names: If the filenames you specify for many
># of the server's control files begin with "/" (or "drive:/" for Win32), the
># server will use that explicit path.  If the filenames do *not* begin
># with "/", the value of ServerRoot is prepended -- so 'log/access_log'
># with ServerRoot set to '/www' will be interpreted by the
># server as '/www/log/access_log', where as '/log/access_log' will be
># interpreted as '/log/access_log'.
>
>#
># ServerRoot: The top of the directory tree under which the server's
># configuration, error, and log files are kept.
>#
># Do not add a slash at the end of the directory path.  If you point
># ServerRoot at a non-local disk, be sure to specify a local disk on the
># Mutex directive, if file-based mutexes are used.  If you wish to share the
># same ServerRoot for multiple httpd daemons, you will need to change at
># least PidFile.
>#
>ServerRoot "/etc/httpd"
>
>#
># Listen: Allows you to bind Apache to specific IP addresses and/or
># ports, instead of the default. See also the <VirtualHost>
># directive.
>#
># Change this to Listen on specific IP addresses as shown below to 
># prevent Apache from glomming onto all bound IP addresses.
>#
>#Listen 12.34.56.78:80
>Listen 80
>
>#
># Dynamic Shared Object (DSO) Support
>#
># To be able to use the functionality of a module which was built as a DSO you
># have to place corresponding `LoadModule' lines at this location so the
># directives contained in it are actually available _before_ they are used.
># Statically compiled modules (those listed by `httpd -l') do not need
># to be loaded here.
>#
># Example:
># LoadModule foo_module modules/mod_foo.so
>#
>Include conf.modules.d/*.conf
>
>#
># If you wish httpd to run as a different user or group, you must run
># httpd as root initially and it will switch.  
>#
># User/Group: The name (or #number) of the user/group to run httpd as.
># It is usually good practice to create a dedicated user and group for
># running httpd, as with most system services.
>#
>User apache
>Group apache
>
># 'Main' server configuration
>#
># The directives in this section set up the values used by the 'main'
># server, which responds to any requests that aren't handled by a
># <VirtualHost> definition.  These values also provide defaults for
># any <VirtualHost> containers you may define later in the file.
>#
># All of these directives may appear inside <VirtualHost> containers,
># in which case these default settings will be overridden for the
># virtual host being defined.
>#
>
>#
># ServerAdmin: Your address, where problems with the server should be
># e-mailed.  This address appears on some server-generated pages, such
># as error documents.  e.g. admin@your-domain.com
>#
>ServerAdmin root@localhost
>
>#
># ServerName gives the name and port that the server uses to identify itself.
># This can often be determined automatically, but we recommend you specify
># it explicitly to prevent problems during startup.
>#
># If your host doesn't have a registered DNS name, enter its IP address here.
>#
>#ServerName www.example.com:80
>
>#
># Deny access to the entirety of your server's filesystem. You must
># explicitly permit access to web content directories in other 
># <Directory> blocks below.
>#
><Directory />
>    AllowOverride none
>    Require all denied
></Directory>
>
>#
># Note that from this point forward you must specifically allow
># particular features to be enabled - so if something's not working as
># you might expect, make sure that you have specifically enabled it
># below.
>#
>
>#
># DocumentRoot: The directory out of which you will serve your
># documents. By default, all requests are taken from this directory, but
># symbolic links and aliases may be used to point to other locations.
>#
>DocumentRoot "/var/www/html"
>
>#
># Relax access to content within /var/www.
>#
><Directory "/var/www">
>    AllowOverride None
>    # Allow open access:
>    Require all granted
></Directory>
>
># Further relax access to the default document root:
><Directory "/var/www/html">
>    #
>    # Possible values for the Options directive are "None", "All",
>    # or any combination of:
>    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
>    #
>    # Note that "MultiViews" must be named *explicitly* --- "Options All"
>    # doesn't give it to you.
>    #
>    # The Options directive is both complicated and important.  Please see
>    # http://httpd.apache.org/docs/2.4/mod/core.html#options
>    # for more information.
>    #
>    Options Indexes FollowSymLinks
>
>    #
>    # AllowOverride controls what directives may be placed in .htaccess files.
>    # It can be "All", "None", or any combination of the keywords:
>    #   Options FileInfo AuthConfig Limit
>    #
>    AllowOverride None
>
>    #
>    # Controls who can get stuff from this server.
>    #
>    Require all granted
></Directory>
>
>#
># DirectoryIndex: sets the file that Apache will serve if a directory
># is requested.
>#
><IfModule dir_module>
>    DirectoryIndex index.html index.shtml
></IfModule>
>
>#
># The following lines prevent .htaccess and .htpasswd files from being 
># viewed by Web clients. 
>#
><Files ".ht*">
>    Require all denied
></Files>
>
>#
># ErrorLog: The location of the error log file.
># If you do not specify an ErrorLog directive within a <VirtualHost>
># container, error messages relating to that virtual host will be
># logged here.  If you *do* define an error logfile for a <VirtualHost>
># container, that host's errors will be logged there and not here.
>#
>ErrorLog "logs/error_log"
>
>#
># LogLevel: Control the number of messages logged to the error_log.
># Possible values include: debug, info, notice, warn, error, crit,
># alert, emerg.
>#
>LogLevel warn
>
><IfModule log_config_module>
>    #
>    # The following directives define some format nicknames for use with
>    # a CustomLog directive (see below).
>    #
>    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
>    LogFormat "%h %l %u %t \"%r\" %>s %b" common
>
>    <IfModule logio_module>
>      # You need to enable mod_logio.c to use %I and %O
>      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
>    </IfModule>
>
>    #
>    # The location and format of the access logfile (Common Logfile Format).
>    # If you do not define any access logfiles within a <VirtualHost>
>    # container, they will be logged here.  Contrariwise, if you *do*
>    # define per-<VirtualHost> access logfiles, transactions will be
>    # logged therein and *not* in this file.
>    #
>    #CustomLog "logs/access_log" common
>
>    #
>    # If you prefer a logfile with access, agent, and referer information
>    # (Combined Logfile Format) you can use the following directive.
>    #
>    CustomLog "logs/access_log" combined
></IfModule>
>
><IfModule alias_module>
>    #
>    # Redirect: Allows you to tell clients about documents that used to 
>    # exist in your server's namespace, but do not anymore. The client 
>    # will make a new request for the document at its new location.
>    # Example:
>    # Redirect permanent /foo http://www.example.com/bar
>
>    #
>    # Alias: Maps web paths into filesystem paths and is used to
>    # access content that does not live under the DocumentRoot.
>    # Example:
>    # Alias /webpath /full/filesystem/path
>    #
>    # If you include a trailing / on /webpath then the server will
>    # require it to be present in the URL.  You will also likely
>    # need to provide a <Directory> section to allow access to
>    # the filesystem path.
>
>    #
>    # ScriptAlias: This controls which directories contain server scripts. 
>    # ScriptAliases are essentially the same as Aliases, except that
>    # documents in the target directory are treated as applications and
>    # run by the server when requested rather than as documents sent to the
>    # client.  The same rules about trailing "/" apply to ScriptAlias
>    # directives as to Alias.
>    #
>    ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
>
></IfModule>
>
>#
># "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
># CGI directory exists, if you have that configured.
>#
><Directory "/var/www/cgi-bin">
>    AllowOverride None
>    Options None
>    Require all granted
></Directory>
>
><IfModule mime_module>
>    #
>    # TypesConfig points to the file containing the list of mappings from
>    # filename extension to MIME-type.
>    #
>    TypesConfig /etc/mime.types
>
>    #
>    # AddType allows you to add to or override the MIME configuration
>    # file specified in TypesConfig for specific file types.
>    #
>    #AddType application/x-gzip .tgz
>    #
>    # AddEncoding allows you to have certain browsers uncompress
>    # information on the fly. Note: Not all browsers support this.
>    #
>    #AddEncoding x-compress .Z
>    #AddEncoding x-gzip .gz .tgz
>    #
>    # If the AddEncoding directives above are commented-out, then you
>    # probably should define those extensions to indicate media types:
>    #
>    AddType application/x-compress .Z
>    AddType application/x-gzip .gz .tgz
>
>    #
>    # AddHandler allows you to map certain file extensions to "handlers":
>    # actions unrelated to filetype. These can be either built into the server
>    # or added with the Action directive (see below)
>    #
>    # To use CGI scripts outside of ScriptAliased directories:
>    # (You will also need to add "ExecCGI" to the "Options" directive.)
>    #
>    #AddHandler cgi-script .cgi
>
>    # For type maps (negotiated resources):
>    #AddHandler type-map var
>
>    #
>    # Filters allow you to process content before it is sent to the client.
>    #
>    # To parse .shtml files for server-side includes (SSI):
>    # (You will also need to add "Includes" to the "Options" directive.)
>    #
>    AddType text/html .shtml
>    AddOutputFilter INCLUDES .shtml
></IfModule>
>
>#
># Specify a default charset for all content served; this enables
># interpretation of all content as UTF-8 by default.  To use the 
># default browser choice (ISO-8859-1), or to allow the META tags
># in HTML content to override this choice, comment out this
># directive:
>#
>AddDefaultCharset UTF-8
>
><IfModule mime_magic_module>
>    #
>    # The mod_mime_magic module allows the server to use various hints from the
>    # contents of the file itself to determine its type.  The MIMEMagicFile
>    # directive tells the module where the hint definitions are located.
>    #
>    MIMEMagicFile conf/magic
></IfModule>
>
>#
># Customizable error responses come in three flavors:
># 1) plain text 2) local redirects 3) external redirects
>#
># Some examples:
>#ErrorDocument 500 "The server made a boo boo."
>#ErrorDocument 404 /missing.html
>#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
>#ErrorDocument 402 http://www.example.com/subscription_info.html
>#
>
>#
># EnableMMAP and EnableSendfile: On systems that support it, 
># memory-mapping or the sendfile syscall may be used to deliver
># files.  This usually improves server performance, but must
># be turned off when serving from networked-mounted 
># filesystems or if support for these functions is otherwise
># broken on your system.
># Defaults if commented: EnableMMAP On, EnableSendfile Off
>#
>#EnableMMAP off
>EnableSendfile on
>
># Supplemental configuration
>#
># Load config files in the "/etc/httpd/conf.d" directory, if any.
>IncludeOptional conf.d/*.conf
>
><IfModule include_module>
>XBitHack on
></IfModule>

Actions: View

Attachments on bug 999131: 838795 | 838796