Attachment 845542 Details for Bug 1007976 – smartctl for sata device

smartctl for sata device

smartctl_sda.txt (text/plain), 4.22 KB, created by Brian on 2014-01-04 20:27:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Brian

Created: 2014-01-04 20:27:39 UTC

Size: 4.22 KB

patch

obsolete

>smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.12.6-200.fc19.x86_64] (local build)
>Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
>
>=== START OF INFORMATION SECTION ===
>Model Family:     Samsung based SSDs
>Device Model:     Samsung SSD 840 PRO Series
>Serial Number:    S1ATNEAD638659J
>LU WWN Device Id: 5 002538 5503bd908
>Firmware Version: DXM05B0Q
>User Capacity:    256,060,514,304 bytes [256 GB]
>Sector Size:      512 bytes logical/physical
>Rotation Rate:    Solid State Device
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
>SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
>Local Time is:    Sat Jan  4 15:20:36 2014 EST
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x00)	Offline data collection activity
>					was never started.
>					Auto Offline Data Collection: Disabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		(53956) seconds.
>Offline data collection
>capabilities: 			 (0x53) SMART execute Offline immediate.
>					Auto Offline data collection on/off support.
>					Suspend Offline collection upon new
>					command.
>					No Offline surface scan supported.
>					Self-test supported.
>					No Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					General Purpose Logging supported.
>Short self-test routine 
>recommended polling time: 	 (   2) minutes.
>Extended self-test routine
>recommended polling time: 	 (  20) minutes.
>SCT capabilities: 	       (0x003d)	SCT Status supported.
>					SCT Error Recovery Control supported.
>					SCT Feature Control supported.
>					SCT Data Table supported.
>
>SMART Attributes Data Structure revision number: 1
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
>  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       471
> 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       312
>177 Wear_Leveling_Count     0x0013   099   099   000    Pre-fail  Always       -       2
>179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
>181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
>182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
>183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
>187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
>190 Airflow_Temperature_Cel 0x0032   082   068   000    Old_age   Always       -       18
>195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
>199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
>235 POR_Recovery_Count      0x0012   099   099   000    Old_age   Always       -       170
>241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       419866174
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>No self-tests have been logged.  [To run self-tests, use: smartctl -t]
>
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>  255        0    65535  Read_scanning was never started
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>

Actions: View

Attachments on bug 1007976: 797437 | 845509 | 845542 | 845543