Attachment 845623 Details for Bug 1043271 – serial log booting 3.13.0-rc6 with abort on non-line fetch

serial log booting 3.13.0-rc6 with abort on non-line fetch

beagle-3.13.0-rc6-nodebug-error.txt (text/plain), 19.56 KB, created by zachw on 2014-01-05 02:53:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: zachw

Created: 2014-01-05 02:53:55 UTC

Size: 19.56 KB

patch

obsolete

>
>U-Boot SPL 2013.04-dirty (May 20 2013 - 14:30:06)
>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
>musb-hdrc: MHDRC RTL version 2.0 
>musb-hdrc: setup fifo_mode 4
>musb-hdrc: 28/31 max ep, 16384/16384 memory
>USB Peripheral mode controller at 47401000 using PIO, IRQ 0
>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
>musb-hdrc: MHDRC RTL version 2.0 
>musb-hdrc: setup fifo_mode 4
>musb-hdrc: 28/31 max ep, 16384/16384 memory
>USB Host mode controller at 47401800 using PIO, IRQ 0
>OMAP SD/MMC: 0
>mmc_send_cmd : timeout: No status update
>reading u-boot.img
>reading u-boot.img
>
>
>U-Boot 2013.04-dirty (May 20 2013 - 14:30:06)
>
>I2C:   ready
>DRAM:  512 MiB
>WARNING: Caches not enabled
>NAND:  No NAND device found!!!
>0 MiB
>MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
>*** Warning - readenv() failed, using default environment
>
>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
>musb-hdrc: MHDRC RTL version 2.0 
>musb-hdrc: setup fifo_mode 4
>musb-hdrc: 28/31 max ep, 16384/16384 memory
>USB Peripheral mode controller at 47401000 using PIO, IRQ 0
>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
>musb-hdrc: MHDRC RTL version 2.0 
>musb-hdrc: setup fifo_mode 4
>musb-hdrc: 28/31 max ep, 16384/16384 memory
>USB Host mode controller at 47401800 using PIO, IRQ 0
>Net:   <ethaddr> not set. Validating first E-fuse MAC
>cpsw, usb_ether
>Hit any key to stop autoboot:  0 
>gpio: pin 53 (gpio 53) value is 1
>mmc0 is current device
>micro SD card found
>mmc0 is current device
>gpio: pin 54 (gpio 54) value is 1
>SD/MMC found on device 0
>reading uEnv.txt
>198 bytes read in 3 ms (64.5 KiB/s)
>Loaded environment from uEnv.txt
>Importing environment from mmc ...
>Running uenvcmd ...
>20682 bytes read in 21 ms (960.9 KiB/s)
>Running boot.scr script from mmc ...
>## Executing script at 80200000
>Welcome to a-b-c 0.59.
>
>Using findfdt to set u_dtb
>Configuring for am33xx
>Using defaults for am335x-boneblack.dtb, and will load dtb during startup.
>Will scan for kernels on mmc usb, using ext4 ext2 fat filesystems with bootz
>
>Starting menu init....
>
>Using kernel k1 (3.13.0-0.rc6.git0.2.fc21.armv7hl).
>Auto-booting 3.13.0-0.rc6.git0.2.fc21.armv7hl in 3 seconds. Type ^C to abort then run menu for help.
> 3 2 1...
>5164424 bytes read in 939 ms (5.2 MiB/s)
>10515250 bytes read in 1823 ms (5.5 MiB/s)
>17911 bytes read in 84 ms (208 KiB/s)
>bootargs are ro rootwait rhgb quiet root=UUID=dd78a003-5028-4466-b966-c33d9fefff1a console=ttyO0,115200n8
>## Loading init Ramdisk from Legacy Image at 82000000 ...
>   Image Name:   initramfs
>   Image Type:   ARM Linux RAMDisk Image (uncompressed)
>   Data Size:    10515186 Bytes = 10 MiB
>   Load Address: 00000000
>   Entry Point:  00000000
>## Flattened Device Tree blob at 81600000
>   Booting using the fdt blob at 0x81600000
>   Loading Ramdisk to 9e82f000, end 9f2362f2 ... OK
>   Using Device Tree in place at 81600000, end 816075f6
>
>Starting kernel ...
>
>[    0.270383] omap_init_mbox: hwmod doesn't have valid attrs
>[    2.227437] sr_init: platform driver register failed for SR
>[    6.199818] tilcdc 4830e000.lcdc: no encoders/connectors found
>[    6.206078] tilcdc 4830e000.lcdc: failed to initialize mode setting
>[  OK  ] Started dracut initqueue hook.
>         Starting dracut pre-mount hook...
>[  OK  ] Started Show Plymouth Boot Screen.
>[  OK  ] Reached target Paths.
>[  OK  ] Reached target Basic System.
>[    8.036935] dracut-pre-mount[167]: //lib/dracut/hooks/pre-mount/10-resume.sh: line 22: /sys/power/resume: No such file or directory
>[  OK  ] Started dracut pre-mount hook.
>         Mounting /sysroot...
>[  OK  ] Mounted /sysroot.
>[  OK  ] Reached target Initrd Root File System.
>         Starting Reload Configuration from the Real Root...
>[  OK  ] Started Reload Configuration from the Real Root.
>[  OK  ] Reached target Initrd File Systems.
>[  OK  ] Reached target Initrd Default Target.
>
>Welcome to Fedora 20 (Heisenbug)!
>
>[  OK  ] Stopped Switch Root.
>[  OK  ] Stopped target Switch Root.
>[  OK  ] Stopped target Initrd File Systems.
>[  OK  ] Stopped target Initrd Root File System.
>[  OK  ] Created slice User and Session Slice.
>[  OK  ] Created slice system-serial\x2dgetty.slice.
>         Expecting device dev-ttyO0.device...
>[  OK  ] Created slice system-getty.slice.
>         Mounting RPC Pipe File System...
>         Mounting RPC Pipe File System...
>[  OK  ] Reached target Remote File Systems.
>         Starting Replay Read-Ahead Data...
>         Starting Collect Read-Ahead Data...
>[  OK  ] Reached target Slices.
>[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
>[  OK  ] Listening on Delayed Shutdown Socket.
>         Mounting Debug File System...
>         Starting Create list of required static device nodes...rrent kernel...
>[  OK  ] Set up automount Arbitrary Executable File Formats F...utomount Point.
>[  OK  ] Reached target Paths.
>         Mounting POSIX Message Queue File System...
>[  OK  ] Listening on udev Kernel Socket.
>[  OK  ] Listening on udev Control Socket.
>         Starting udev Coldplug all Devices...
>[  OK  ] Listening on LVM2 metadata daemon socket.
>[  OK  ] Listening on Device-mapper event daemon FIFOs.
>         Starting Monitoring of LVM2 mirrors, snapshots etc. ...ress polling...
>         Expecting device dev-disk-by\x2duuid-15e6d1fa\x2dca0...accdb.device...
>         Expecting device dev-disk-by\x2duuid-DBB1\x2dBA63.device...
>[  OK  ] Started Replay Read-Ahead Data.
>[  OK  ] Started Collect Read-Ahead Data.
>[  OK  ] Mounted RPC Pipe File System.
>[  OK  ] Mounted RPC Pipe File System.
>[  OK  ] Mounted Debug File System.
>[  OK  ] Mounted POSIX Message Queue File System.
>         Starting Apply Kernel Variables...
>         Starting File System Check on Root Device...
>         Mounting Configuration File System...
>[  OK  ] Stopped Trigger Flushing of Journal to Persistent Storage.
>         Stopping Journal Service...
>[  OK  ] Stopped Journal Service.
>         Starting Journal Service...
>[  OK  ] Started Journal Service.
>         Starting LVM2 metadata daemon...
>[  OK  ] Started Create list of required static device nodes ...current kernel.
>[  OK  ] Started Apply Kernel Variables.
>[  OK  ] Started File System Check on Root Device.
>[  OK  ] Mounted Configuration File System.
>         Starting Remount Root and Kernel File Systems...
>         Starting Create static device nodes in /dev...
>[   20.128204] systemd-fsck[261]: _/: clean, 95826/458784 files, 609607/1904103 blocks
>[  OK  ] Started Remount Root and Kernel File Systems.
>         Starting Configure read-only root support...
>         Starting Load/Save Random Seed...
>[  OK  ] Started Load/Save Random Seed.
>[  OK  ] Started LVM2 metadata daemon.
>[  OK  ] Started udev Coldplug all Devices.
>         Starting udev Wait for Complete Device Initialization...
>[  OK  ] Started Create static device nodes in /dev.
>[  OK  ] Started Configure read-only root support.
>         Starting udev Kernel Device Manager...
>[  OK  ] Reached target Local File Systems (Pre).
>[  OK  ] Started Monitoring of LVM2 mirrors, snapshots etc. u...ogress polling.
>[  OK  ] Started udev Kernel Device Manager.
>[  OK  ] Started udev Wait for Complete Device Initialization.
>         Starting Activation of DM RAID sets...
>[  OK  ] Started Activation of DM RAID sets.
>[  OK  ] Reached target Encrypted Volumes.
>[  OK  ] Mounted Configuration File System.
>[  OK  ] Found device /dev/ttyO0.
>[   26.053809] Unhandled fault: external abort on non-linefetch (0x1008) at 0xe09b2c20
>[   26.061865] Internal error: : 1008 [#1] SMP ARM
>[   26.066614] Modules linked in: ti_cpsw(+) davinci_cpdma omap_sham ptp omap_aes pps_core omap_rng tps65217_regulator musb_am335x omap_wdt nfsd tilcdc backlight drm_kms_helper drm mmc_block
>[   26.084234] CPU: 0 PID: 298 Comm: systemd-udevd Not tainted 3.13.0-0.rc6.git0.2.fc21.armv7hl #1
>[   26.093349] task: db622ac0 ti: dbe6a000 task.ti: dbe6a000
>[   26.099061] PC is at cpts_fifo_read.constprop.7+0x28/0xfc [ti_cpsw]
>[   26.105650] LR is at cpts_systim_read+0x20/0x94 [ti_cpsw]
>[   26.111309] pc : [<bf121d48>]    lr : [<bf122014>]    psr: 600f0093
>[   26.111309] sp : dbe6bc78  ip : 386cc95b  fp : db7cc510
>[   26.123330] r10: c09e80c0  r9 : db2074fc  r8 : 00000001
>[   26.128803] r7 : 00000010  r6 : ffffffff  r5 : db207418  r4 : 0420e715
>[   26.135641] r3 : e09b2c00  r2 : 00000001  r1 : db207470  r0 : db207418
>[   26.142479] Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
>[   26.150044] Control: 10c5387d  Table: 9be58019  DAC: 00000015
>[   26.156063] Process systemd-udevd (pid: 298, stack limit = 0xdbe6a248)
>[   26.162901] Stack: (0xdbe6bc78 to 0xdbe6c000)
>[   26.167467] bc60:                                                       0420e715 db207470
>[   26.176040] bc80: db207488 db207784 bf1230e8 bf122ffc db7cc500 bf122014 bf121ff4 0420e715
>[   26.184613] bca0: 0d23305f c009b020 db207418 db207464 600f0013 bf1222b8 0420e715 0d23305f
>[   26.193185] bcc0: 80000000 db7cc000 dd121610 dd121600 00000000 bf12055c 00000000 00000000
>[   26.201757] bce0: db7cc500 dd049950 dd12308c db7cca0c dd123000 db7cc500 dd001f00 db7cc298
>[   26.210330] bd00: e09b2d00 0000000a 00000400 00000002 dd121610 e09b2800 e09b2a00 e09b2a20
>[   26.218901] bd20: e09b2a40 e09b2a60 e09b28c0 e09b28e0 00000008 00000001 0000003c 4a102000
>[   26.227473] bd40: 4a102000 00002000 00000010 00000001 dd121610 dd121610 bf124208 00000000
>[   26.236045] bd60: c0ab6540 00000000 dbe6a000 c09ee50c 00000024 c039b93c c039b91c dd121610
>[   26.244617] bd80: bf124208 c0399fcc bf124208 dd121610 dbe6bda0 dd121610 dd121644 bf124208
>[   26.253189] bda0: 00000000 c039a28c 00000000 bf124208 c039a21c c0398460 dd01195c dd11e4b4
>[   26.261761] bdc0: bf124208 db577380 c0a86a28 c03995fc bf123c20 bf123c20 0000006f bf124208
>[   26.270332] bde0: 00000001 bf127000 db210600 c039a8fc 00000000 dbe6bf58 00000001 c0008afc
>[   26.278904] be00: 00000010 c00d1828 00000000 c0a3fc5c 00000001 bf1243f0 c0a3fd44 00000001
>[   26.287476] be20: db210624 c00d1838 c00d1750 fffffff9 c00d39e0 c062bf80 c0a3dd2c c00870b4
>[   26.296048] be40: c0a3dd2c 00000000 ffffffff c006c638 00000000 bd94352e dbe6bf58 dbe6bf58
>[   26.304620] be60: 00000001 bf1243f0 db210600 bf124438 00000001 db210624 00000024 c00aa810
>[   26.313192] be80: bf1243fc 00007fff c00a7cf4 00000000 b7a96af0 c00a7e98 00000000 bf1243fc
>[   26.321765] bea0: dbe6a000 bf124578 00000000 e09af280 dbe6becc b6ed2bc0 00000000 c01509a0
>[   26.330334] bec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>[   26.338905] bee0: 00000000 00000000 6e72656b 00006c65 00000000 00000000 00000000 00000000
>[   26.347475] bf00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>[   26.356047] bf20: 00000000 bd94352e 00000060 00000000 b6ed2bc0 00000006 0000017b c000eb44
>[   26.364619] bf40: dbe6a000 00000000 b7a96af0 c00aaf98 00000002 00000000 e09a4000 0000b320
>[   26.373191] bf60: e09aed08 e09aeb94 e09ad9f4 0000658c 000072cc bf1243a8 00000003 00000000
>[   26.381762] bf80: 00000023 00000024 0000001d 00000000 00000015 00000000 b7a96af0 b7a7e738
>[   26.390334] bfa0: b7a829e8 c000e9a0 b7a96af0 b7a7e738 00000006 b6ed2bc0 00000000 bef1db20
>[   26.398906] bfc0: b7a96af0 b7a7e738 b7a829e8 0000017b b6ed2bc0 b7a96a68 00000000 b7a96af0
>[   26.407479] bfe0: bef1da30 bef1da20 b6ec9334 b6e18960 600f0010 00000006 5f670079 656a626f
>[   26.416125] [<bf121d48>] (cpts_fifo_read.constprop.7+0x28/0xfc [ti_cpsw]) from [<bf122014>] (cpts_systim_read+0x20/0x94 [ti_cpsw])
>[   26.428467] [<bf122014>] (cpts_systim_read+0x20/0x94 [ti_cpsw]) from [<c009b020>] (timecounter_init+0x28/0x34)
>[   26.438980] [<c009b020>] (timecounter_init+0x28/0x34) from [<bf1222b8>] (cpts_register+0x188/0x224 [ti_cpsw])
>[   26.449413] [<bf1222b8>] (cpts_register+0x188/0x224 [ti_cpsw]) from [<bf12055c>] (cpsw_probe+0xa10/0xddc [ti_cpsw])
>[   26.460386] [<bf12055c>] (cpsw_probe+0xa10/0xddc [ti_cpsw]) from [<c039b93c>] (platform_drv_probe+0x20/0x50)
>[   26.470697] [<c039b93c>] (platform_drv_probe+0x20/0x50) from [<c0399fcc>] (driver_probe_device+0x130/0x334)
>[   26.480915] [<c0399fcc>] (driver_probe_device+0x130/0x334) from [<c039a28c>] (__driver_attach+0x70/0x94)
>[   26.490855] [<c039a28c>] (__driver_attach+0x70/0x94) from [<c0398460>] (bus_for_each_dev+0x78/0x8c)
>[   26.500341] [<c0398460>] (bus_for_each_dev+0x78/0x8c) from [<c03995fc>] (bus_add_driver+0x108/0x200)
>[   26.509918] [<c03995fc>] (bus_add_driver+0x108/0x200) from [<c039a8fc>] (driver_register+0xa4/0xe8)
>[   26.519407] [<c039a8fc>] (driver_register+0xa4/0xe8) from [<c0008afc>] (do_one_initcall+0xcc/0x188)
>[   26.528907] [<c0008afc>] (do_one_initcall+0xcc/0x188) from [<c00aa810>] (load_module+0x17a8/0x1d7c)
>[   26.538398] [<c00aa810>] (load_module+0x17a8/0x1d7c) from [<c00aaf98>] (SyS_finit_module+0x90/0xa8)
>[   26.547890] [<c00aaf98>] (SyS_finit_module+0x90/0xa8) from [<c000e9a0>] (ret_fast_syscall+0x0/0x30)
>[   26.557373] Code: e3a07010 e3e06000 e3a08001 e5953000 (e5932020) 
>[   26.563762] ---[ end trace 1221705eb651da04 ]---
>[  OK  ] Found device /dev/disk/by-uuid/DBB1-BA63.
>         Mounting /boot/uboot...
>[  OK  ] Found device /dev/disk/by-uuid/15e6d1fa-ca07-4337-a703-85e0011accdb.
>         Activating swap /dev/disk/by-uuid/15e6d1fa-ca07-4337...85e0011accdb...
>[   27.373700] Adding 124996k swap on /dev/mmcblk0p2.  Priority:-1 extents:1 across:124996k SSFS
>[   27.483432] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[   27.529578] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
>[  OK  ] Activated swap /dev/disk/by-uuid/15e6d1fa-ca07-4337-a703-85e0011accdb.
>[  OK  ] Reached target Swap.
>[  OK  ] Mounted /boot/uboot.
>[  OK  ] Reached target Local File Systems.
>         Starting Recreate Volatile Files and Directories...
>         Starting Tell Plymouth To Write Out Runtime Data...
>         Starting Trigger Flushing of Journal to Persistent Storage...
>         Starting Security Auditing Service...
>[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
>[  OK  ] Started Security Auditing Service.
>[   28.410208] type=1305 audit(946653533.681:4): audit_pid=343 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
>[   28.632231] systemd-journald[265]: Received request to flush runtime journal from PID 1
>[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
>[   28.729085] systemd-journald[265]: File /var/log/journal/a7d7e7dcbf194f4b8a1700d1949afd8a/system.journal corrupted or uncleanly shut down, renaming and replacing.
>[  OK  ] Started Recreate Volatile Files and Directories.
>         Starting Update UTMP about System Reboot/Shutdown...
>[  OK  ] Started Update UTMP about System Reboot/Shutdown.
>[  OK  ] Reached target System Initialization.
>[  OK  ] Reached target Timers.
>[  OK  ] Listening on Open-iSCSI iscsid Socket.
>[  OK  ] Listening on Open-iSCSI iscsiuio Socket.
>[  OK  ] Listening on PC/SC Smart Card Daemon Activation Socket.
>[  OK  ] Listening on RPCbind Server Activation Socket.
>[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
>[  OK  ] Listening on D-Bus System Message Bus Socket.
>[  OK  ] Reached target Sockets.
>[  OK  ] Reached target Basic System.
>         Starting firewalld - dynamic firewall daemon...
>         Starting Permit User Sessions...
>         Starting System Logging Service...
>         Starting Modem Manager...
>         Starting Hardware RNG Entropy Gatherer Daemon...
>[  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
>         Starting RPC bind service...
>         Starting irqbalance daemon...
>[  OK  ] Started irqbalance daemon.
>         Starting NTP client/server...
>         Starting Self Monitoring and Reporting Technology (SMART) Daemon...
>[  OK  ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
>         Starting Avahi mDNS/DNS-SD Stack...
>         Starting Login Service...
>         Starting D-Bus System Message Bus...
>[  OK  ] Started D-Bus System Message Bus.
>[  OK  ] Started System Logging Service.
>[  OK  ] Started Permit User Sessions.
>[[   32.943612] 47401300.usb-phy supply vcc not found, using dummy regulator
>  OK  ] Started RPC bind service.
>         Starting Job spooling tools...
>[  OK  ] Started Job spooling tools.
>         Starting Command Scheduler...
>[  OK  ] Started Command Scheduler.
>         Starting Terminate Plymouth Boot Screen...
>         Starting Wait for Plymouth Boot Screen to Quit...
>[   34.285685] omap_uart 44e09000.serial: no wakeirq for uart0
>[  OK  ] Started NTP client/server.
>[   34.908370] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
>[   34.919562] musb-hdrc: MHDRC RTL version 2.0 
>[   34.924171] musb-hdrc: setup fifo_mode 4
>[   34.928328] musb-hdrc: 28/31 max ep, 16384/16384 memory
>[   35.482646] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
>[   35.929754] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
>[   36.276654] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[   36.283887] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   36.291499] usb usb1: Product: MUSB HDRC host driver
>[   36.296740] usb usb1: Manufacturer: Linux 3.13.0-0.rc6.git0.2.fc21.armv7hl musb-hcd
>[   36.304795] usb usb1: SerialNumber: musb-hdrc.0.auto
>[   36.634839] hub 1-0:1.0: USB hub found
>[   36.758772] hub 1-0:1.0: 1 port detected
>[   36.929943] 47401b00.usb-phy supply vcc not found, using dummy regulator
>[   37.100957] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
>[   37.112122] musb-hdrc: MHDRC RTL version 2.0 
>[   37.116730] musb-hdrc: setup fifo_mode 4
>[   37.120890] musb-hdrc: 28/31 max ep, 16384/16384 memory
>[   37.429721] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
>[   37.605890] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2
>[   37.861829] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[   37.869133] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   37.876763] usb usb2: Product: MUSB HDRC host driver
>[   37.882011] usb usb2: Manufacturer: Linux 3.13.0-0.rc6.git0.2.fc21.armv7hl musb-hcd
>[   37.890073] usb usb2: SerialNumber: musb-hdrc.1.auto
>[   38.111875] hub 2-0:1.0: USB hub found
>[   38.230794] hub 2-0:1.0: 1 port detected
>[   40.055417] omap_uart 44e09000.serial: no wakeirq for uart0
>[   40.102081] omap_uart 44e09000.serial: no wakeirq for uart0
>[   40.407786] omap_uart 44e09000.serial: no wakeirq for uart0
>[   40.451103] omap_uart 44e09000.serial: no wakeirq for uart0
>
>Fedora release 20 (Heisenbug)
>Kernel 3.13.0-0.rc6.git0.2.fc21.armv7hl on an armv7l (ttyO0)
>
>beagle login: [   44.155903] nf_conntrack version 0.5.0 (7911 buckets, 31644 max)
>[   44.565173] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   45.665112] Ebtables v2.0 registered
>[   45.902137] Bridge firewalling registered
>[   50.480153] cfg80211: Calling CRDA to update world regulatory domain
>[   50.693204] cfg80211: World regulatory domain updated:
>[   50.698738] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   50.707354] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   50.715503] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   50.723648] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   50.731794] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   50.739943] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   52.975679] net eth0: initializing cpsw version 1.12 (0)
>[   52.983231] libphy: PHY 4a101000.mdio:00 not found
>[   52.988293] net eth0: phy 4a101000.mdio:00 not found on slave 0
>[   52.994537] libphy: PHY 4a101000.mdio:01 not found
>[   52.999593] net eth0: phy 4a101000.mdio:01 not found on slave 1
>[   53.128874] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>
>Fedora release 20 (Heisenbug)
>Kernel 3.13.0-0.rc6.git0.2.fc21.armv7hl on an armv7l (ttyO0)
>
>beagle login: 
>

Actions: View

Attachments on bug 1043271: 836965 | 845623