Attachment 86067 Details for Bug 78417 – output of lspci -vvv

output of lspci -vvv

lspci-vvv (text/plain), 7.34 KB, created by Michael Redinger on 2002-11-22 16:59:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michael Redinger

Created: 2002-11-22 16:59:01 UTC

Size: 7.34 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 01)
>	Subsystem: Dell Computer Corporation: Unknown device 0126
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
>	Capabilities: [e4] #09 [0105]
>
>00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device (rev 01) (prog-if 00 [VGA])
>	Subsystem: Dell Computer Corporation: Unknown device 0126
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 9
>	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
>	Region 1: Memory at ff680000 (32-bit, non-prefetchable) [size=512K]
>	Capabilities: [d0] Power Management version 1
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Dell Computer Corporation: Unknown device 0126
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 9
>	Region 4: I/O ports at ff80 [size=32]
>
>00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Dell Computer Corporation: Unknown device 0126
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 11
>	Region 4: I/O ports at ff60 [size=32]
>
>00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01) (prog-if 00 [UHCI])
>	Subsystem: Dell Computer Corporation: Unknown device 0126
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 10
>	Region 4: I/O ports at ff40 [size=32]
>
>00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01) (prog-if 20 [EHCI])
>	Subsystem: Dell Computer Corporation: Unknown device 0126
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 3
>	Region 0: Memory at ffa00800 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] #0a [2080]
>
>00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>	I/O behind bridge: 0000e000-0000efff
>	Memory behind bridge: ff800000-ff9fffff
>	Prefetchable memory behind bridge: fff00000-000fffff
>	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
>00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) (prog-if 8a [Master SecP PriP])
>	Subsystem: Dell Computer Corporation: Unknown device 0126
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 10
>	Region 0: I/O ports at <unassigned> [size=8]
>	Region 1: I/O ports at <unassigned> [size=4]
>	Region 2: I/O ports at <unassigned> [size=8]
>	Region 3: I/O ports at <unassigned> [size=4]
>	Region 4: I/O ports at ffa0 [size=16]
>	Region 5: Memory at 1ff00000 (32-bit, non-prefetchable) [disabled] [size=1K]
>
>00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 01)
>	Subsystem: Dell Computer Corporation: Unknown device 0126
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin B routed to IRQ 11
>	Region 4: I/O ports at dc80 [size=32]
>
>00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 01)
>	Subsystem: Dell Computer Corporation: Unknown device 0126
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 11
>	Region 0: I/O ports at d800 [size=256]
>	Region 1: I/O ports at dc40 [size=64]
>	Region 2: Memory at ffa00400 (32-bit, non-prefetchable) [size=512]
>	Region 3: Memory at ffa00000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:09.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) (prog-if 10 [OHCI])
>	Subsystem: Procomp Informatics Ltd: Unknown device 8010
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (750ns min, 1000ns max), cache line size 10
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at ff8ff800 (32-bit, non-prefetchable) [size=2K]
>	Region 1: Memory at ff8f8000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 1
>		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
>	Subsystem: Dell Computer Corporation: Unknown device 002e
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (63750ns min), cache line size 10
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at ff8c0000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at ecc0 [size=64]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [e4] PCI-X non-bridge device.
>		Command: DPERE- ERO+ RBC=0 OST=0
>		Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-	Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>

Actions: View

Attachments on bug 78417: 86067 | 86068 | 86107