Attachment 865054 Details for Bug 1065442 – iw phy output

iw phy output

iw_phy.txt (text/plain), 6.89 KB, created by Gary Case on 2014-02-19 12:59:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gary Case

Created: 2014-02-19 12:59:12 UTC

Size: 6.89 KB

patch

obsolete

>Wiphy phy0
>	max # scan SSIDs: 20
>	max scan IEs length: 393 bytes
>	Coverage class: 0 (up to 0m)
>	Device supports RSN-IBSS.
>	Supported Ciphers:
>		* WEP40 (00-0f-ac:1)
>		* WEP104 (00-0f-ac:5)
>		* TKIP (00-0f-ac:2)
>		* CCMP (00-0f-ac:4)
>		* CMAC (00-0f-ac:6)
>	Available Antennas: TX 0 RX 0
>	Supported interface modes:
>		 * IBSS
>		 * managed
>		 * AP
>		 * AP/VLAN
>		 * monitor
>		 * P2P-client
>		 * P2P-GO
>		 * P2P-device
>	Band 1:
>		Capabilities: 0x1062
>			HT20/HT40
>			Static SM Power Save
>			RX HT20 SGI
>			RX HT40 SGI
>			No RX STBC
>			Max AMSDU length: 3839 bytes
>			DSSS/CCK HT40
>		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>		Minimum RX AMPDU time spacing: 4 usec (0x05)
>		HT TX/RX MCS rate indexes supported: 0-15, 32
>		Bitrates (non-HT):
>			* 1.0 Mbps
>			* 2.0 Mbps (short preamble supported)
>			* 5.5 Mbps (short preamble supported)
>			* 11.0 Mbps (short preamble supported)
>			* 6.0 Mbps
>			* 9.0 Mbps
>			* 12.0 Mbps
>			* 18.0 Mbps
>			* 24.0 Mbps
>			* 36.0 Mbps
>			* 48.0 Mbps
>			* 54.0 Mbps
>		Frequencies:
>			* 2412 MHz [1] (16.0 dBm)
>			* 2417 MHz [2] (16.0 dBm)
>			* 2422 MHz [3] (16.0 dBm)
>			* 2427 MHz [4] (16.0 dBm)
>			* 2432 MHz [5] (16.0 dBm)
>			* 2437 MHz [6] (16.0 dBm)
>			* 2442 MHz [7] (16.0 dBm)
>			* 2447 MHz [8] (16.0 dBm)
>			* 2452 MHz [9] (16.0 dBm)
>			* 2457 MHz [10] (16.0 dBm)
>			* 2462 MHz [11] (16.0 dBm)
>			* 2467 MHz [12] (disabled)
>			* 2472 MHz [13] (disabled)
>	Band 2:
>		Capabilities: 0x1062
>			HT20/HT40
>			Static SM Power Save
>			RX HT20 SGI
>			RX HT40 SGI
>			No RX STBC
>			Max AMSDU length: 3839 bytes
>			DSSS/CCK HT40
>		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>		Minimum RX AMPDU time spacing: 4 usec (0x05)
>		HT TX/RX MCS rate indexes supported: 0-15, 32
>		VHT Capabilities (0x03801120):
>			Max MPDU length: 3895
>			Supported Channel Width: neither 160 nor 80+80
>			short GI (80 MHz)
>			SU Beamformee
>		VHT RX MCS set:
>			1 streams: MCS 0-9
>			2 streams: MCS 0-9
>			3 streams: not supported
>			4 streams: not supported
>			5 streams: not supported
>			6 streams: not supported
>			7 streams: not supported
>			8 streams: not supported
>		VHT RX highest supported: 0 Mbps
>		VHT TX MCS set:
>			1 streams: MCS 0-9
>			2 streams: MCS 0-9
>			3 streams: not supported
>			4 streams: not supported
>			5 streams: not supported
>			6 streams: not supported
>			7 streams: not supported
>			8 streams: not supported
>		VHT TX highest supported: 0 Mbps
>		Bitrates (non-HT):
>			* 6.0 Mbps
>			* 9.0 Mbps
>			* 12.0 Mbps
>			* 18.0 Mbps
>			* 24.0 Mbps
>			* 36.0 Mbps
>			* 48.0 Mbps
>			* 54.0 Mbps
>		Frequencies:
>			* 5180 MHz [36] (16.0 dBm) (passive scanning, no IBSS)
>			* 5200 MHz [40] (16.0 dBm) (passive scanning, no IBSS)
>			* 5220 MHz [44] (16.0 dBm) (passive scanning, no IBSS)
>			* 5240 MHz [48] (16.0 dBm) (passive scanning, no IBSS)
>			* 5260 MHz [52] (16.0 dBm) (passive scanning, no IBSS, radar detection)
>			  DFS state: usable (for 67 sec)
>			* 5280 MHz [56] (16.0 dBm) (passive scanning, no IBSS, radar detection)
>			  DFS state: usable (for 67 sec)
>			* 5300 MHz [60] (16.0 dBm) (passive scanning, no IBSS, radar detection)
>			  DFS state: usable (for 67 sec)
>			* 5320 MHz [64] (16.0 dBm) (passive scanning, no IBSS, radar detection)
>			  DFS state: usable (for 67 sec)
>			* 5500 MHz [100] (16.0 dBm) (passive scanning, no IBSS, radar detection)
>			  DFS state: usable (for 67 sec)
>			* 5520 MHz [104] (16.0 dBm) (passive scanning, no IBSS, radar detection)
>			  DFS state: usable (for 67 sec)
>			* 5540 MHz [108] (16.0 dBm) (passive scanning, no IBSS, radar detection)
>			  DFS state: usable (for 67 sec)
>			* 5560 MHz [112] (16.0 dBm) (passive scanning, no IBSS, radar detection)
>			  DFS state: usable (for 67 sec)
>			* 5580 MHz [116] (16.0 dBm) (passive scanning, no IBSS, radar detection)
>			  DFS state: usable (for 67 sec)
>			* 5600 MHz [120] (disabled)
>			* 5620 MHz [124] (disabled)
>			* 5640 MHz [128] (disabled)
>			* 5660 MHz [132] (16.0 dBm) (passive scanning, no IBSS, radar detection)
>			  DFS state: usable (for 67 sec)
>			* 5680 MHz [136] (16.0 dBm) (passive scanning, no IBSS, radar detection)
>			  DFS state: usable (for 67 sec)
>			* 5700 MHz [140] (16.0 dBm) (passive scanning, no IBSS, radar detection)
>			  DFS state: usable (for 67 sec)
>			* 5720 MHz [144] (disabled)
>			* 5745 MHz [149] (16.0 dBm) (passive scanning, no IBSS)
>			* 5765 MHz [153] (16.0 dBm) (passive scanning, no IBSS)
>			* 5785 MHz [157] (16.0 dBm) (passive scanning, no IBSS)
>			* 5805 MHz [161] (16.0 dBm) (passive scanning, no IBSS)
>			* 5825 MHz [165] (16.0 dBm) (passive scanning, no IBSS)
>	Supported commands:
>		 * new_interface
>		 * set_interface
>		 * new_key
>		 * start_ap
>		 * new_station
>		 * new_mpath
>		 * set_mesh_config
>		 * set_bss
>		 * authenticate
>		 * associate
>		 * deauthenticate
>		 * disassociate
>		 * join_ibss
>		 * join_mesh
>		 * remain_on_channel
>		 * set_tx_bitrate_mask
>		 * frame
>		 * frame_wait_cancel
>		 * set_wiphy_netns
>		 * set_channel
>		 * set_wds_peer
>		 * start_sched_scan
>		 * probe_client
>		 * set_noack_map
>		 * register_beacons
>		 * start_p2p_device
>		 * set_mcast_rate
>		 * connect
>		 * disconnect
>	Supported TX frame types:
>		 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>	Supported RX frame types:
>		 * IBSS: 0x40 0xb0 0xc0 0xd0
>		 * managed: 0x40 0xd0
>		 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>		 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>		 * mesh point: 0xb0 0xc0 0xd0
>		 * P2P-client: 0x40 0xd0
>		 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>		 * P2P-device: 0x40 0xd0
>	WoWLAN support:
>		 * wake up on disconnect
>		 * wake up on magic packet
>		 * wake up on pattern match, up to 20 patterns of 16-128 bytes,
>		   maximum packet offset 0 bytes
>		 * can do GTK rekeying
>		 * wake up on GTK rekey failure
>		 * wake up on EAP identity request
>		 * wake up on 4-way handshake
>		 * wake up on rfkill release
>		 * wake up on TCP connection
>	software interface modes (can always be added):
>		 * AP/VLAN
>		 * monitor
>	valid interface combinations:
>		 * #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
>		   total <= 3, #channels <= 1
>	HT Capability overrides:
>		 * MCS: ff ff ff ff ff ff ff ff ff ff
>		 * maximum A-MSDU length
>		 * supported channel width
>		 * short GI for 40 MHz
>		 * max A-MPDU length exponent
>		 * min MPDU start spacing
>	Device supports TX status socket option.
>	Device supports HT-IBSS.
>	Device supports scan flush.

Actions: View

Attachments on bug 1065442: 865053 | 865054