Attachment 872676 Details for Bug 1046495 – dmesg

dmesg

dmesg.txt (text/plain), 220.24 KB, created by William SK on 2014-03-10 13:10:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: William SK

Created: 2014-03-10 13:10:47 UTC

Size: 220.24 KB

patch

obsolete

>[    0.190082] pci 0000:04:00.0: reg 0x10: [mem 0xf1a00000-0xf1a01fff 64bit]
>[    0.190217] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
>[    0.190252] pci 0000:04:00.0: System wakeup disabled by ACPI
>[    0.191740] pci 0000:00:1c.3: PCI bridge to [bus 04]
>[    0.191836] pci 0000:00:1c.3:   bridge window [mem 0xf1a00000-0xf1afffff]
>[    0.191942] pci 0000:00:1c.4: PCI bridge to [bus 05]
>[    0.192020] pci 0000:00:1c.4:   bridge window [mem 0xf1900000-0xf19fffff]
>[    0.192110] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
>[    0.192130] pci 0000:06:00.0: reg 0x10: [io  0x2000-0x20ff]
>[    0.192165] pci 0000:06:00.0: reg 0x18: [mem 0xf1804000-0xf1804fff 64bit pref]
>[    0.192187] pci 0000:06:00.0: reg 0x20: [mem 0xf1800000-0xf1803fff 64bit pref]
>[    0.192281] pci 0000:06:00.0: supports D1 D2
>[    0.192282] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.192322] pci 0000:06:00.0: System wakeup disabled by ACPI
>[    0.193699] pci 0000:00:1c.5: PCI bridge to [bus 06]
>[    0.193807] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
>[    0.193816] pci 0000:00:1c.5:   bridge window [mem 0xf1800000-0xf18fffff 64bit pref]
>[    0.194369] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
>[    0.194971] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
>[    0.195568] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
>[    0.196165] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
>[    0.196763] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.197464] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.198168] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
>[    0.198767] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
>[    0.199532] ACPI: Enabled 5 GPEs in block 00 to 3F
>[    0.199710] ACPI: \_SB_.PCI0: notify handler is installed
>[    0.199765] Found 1 acpi root devices
>[    0.199841] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>[    0.199992] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.200099] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
>[    0.200204] vgaarb: loaded
>[    0.200274] vgaarb: bridge control possible 0000:01:00.0
>[    0.200348] vgaarb: no bridge control possible 0000:00:02.0
>[    0.200482] SCSI subsystem initialized
>[    0.200594] libata version 3.00 loaded.
>[    0.200610] ACPI: bus type USB registered
>[    0.200693] usbcore: registered new interface driver usbfs
>[    0.200779] usbcore: registered new interface driver hub
>[    0.200873] usbcore: registered new device driver usb
>[    0.201002] PCI: Using ACPI for IRQ routing
>[    0.202580] PCI: pci_cache_line_size set to 64 bytes
>[    0.202733] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
>[    0.202734] e820: reserve RAM buffer [mem 0xbac8f000-0xbbffffff]
>[    0.202736] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
>[    0.202738] e820: reserve RAM buffer [mem 0x1bfe00000-0x1bfffffff]
>[    0.202819] NetLabel: Initializing
>[    0.202891] NetLabel:  domain hash size = 128
>[    0.202963] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.203046] NetLabel:  unlabeled traffic allowed by default
>[    0.203187] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.203621] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.205721] Switched to clocksource hpet
>[    0.210483] pnp: PnP ACPI init
>[    0.210569] ACPI: bus type PNP registered
>[    0.210673] pnp 00:00: [dma 4]
>[    0.210693] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.210794] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.210824] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.210868] system 00:03: [io  0x0680-0x069f] has been reserved
>[    0.210945] system 00:03: [io  0x1000-0x1003] has been reserved
>[    0.211021] system 00:03: [io  0x1004-0x1013] has been reserved
>[    0.211096] system 00:03: [io  0xffff] has been reserved
>[    0.211171] system 00:03: [io  0x0400-0x0453] could not be reserved
>[    0.211248] system 00:03: [io  0x0458-0x047f] has been reserved
>[    0.211323] system 00:03: [io  0x0500-0x057f] has been reserved
>[    0.211399] system 00:03: [io  0x164e-0x164f] has been reserved
>[    0.211475] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.211496] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.211539] system 00:05: [io  0x0454-0x0457] has been reserved
>[    0.211616] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.211663] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.211702] pnp 00:07: Plug and Play ACPI device, IDs DLL050e PNP0f13 (active)
>[    0.211807] pnp 00:08: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
>[    0.211934] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.212012] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.212089] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.212165] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.212242] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.212318] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.212396] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.212473] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.212550] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.212628] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.212707] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.212828] pnp 00:09: Plug and Play ACPI device, IDs SMO8800 (active)
>[    0.212936] pnp: PnP ACPI: found 10 devices
>[    0.213009] ACPI: bus type PNP unregistered
>[    0.219262] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
>[    0.219427] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
>[    0.219531] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.220103] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
>[    0.220180] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
>[    0.220258] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
>[    0.220365] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.220454] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.220534] pci 0000:00:1c.1:   bridge window [mem 0xf1b00000-0xf1bfffff]
>[    0.220620] pci 0000:00:1c.3: PCI bridge to [bus 04]
>[    0.220699] pci 0000:00:1c.3:   bridge window [mem 0xf1a00000-0xf1afffff]
>[    0.220793] pci 0000:00:1c.4: PCI bridge to [bus 05]
>[    0.220870] pci 0000:00:1c.4:   bridge window [mem 0xf1900000-0xf19fffff]
>[    0.220952] pci 0000:00:1c.5: PCI bridge to [bus 06]
>[    0.221027] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
>[    0.221109] pci 0000:00:1c.5:   bridge window [mem 0xf1800000-0xf18fffff 64bit pref]
>[    0.221218] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.221220] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.221221] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.221223] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
>[    0.221224] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
>[    0.221226] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
>[    0.221227] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
>[    0.221229] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
>[    0.221231] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff]
>[    0.221233] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff]
>[    0.221234] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff]
>[    0.221236] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
>[    0.221237] pci_bus 0000:06: resource 2 [mem 0xf1800000-0xf18fffff 64bit pref]
>[    0.221270] NET: Registered protocol family 2
>[    0.221503] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.221793] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.221994] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.222094] TCP: reno registered
>[    0.222179] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.222286] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.222443] NET: Registered protocol family 1
>[    0.222527] pci 0000:00:02.0: Boot video device
>[    0.223694] PCI: CLS 64 bytes, default 64
>[    0.223755] Unpacking initramfs...
>[    0.391957] Freeing initrd memory: 10520K (ffff880036b64000 - ffff8800375aa000)
>[    0.392992] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.393073] software IO TLB [mem 0xb6c8f000-0xbac8f000] (64MB) mapped at [ffff8800b6c8f000-ffff8800bac8efff]
>[    0.393811] Initialise system trusted keyring
>[    0.393923] audit: initializing netlink socket (disabled)
>[    0.394007] type=2000 audit(1393919289.332:1): initialized
>[    0.417795] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.418899] zbud: loaded
>[    0.419105] VFS: Disk quotas dquot_6.5.2
>[    0.419212] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.419593] msgmni has been set to 11759
>[    0.419740] Key type big_key registered
>[    0.419813] SELinux:  Registering netfilter hooks
>[    0.420577] alg: No test for stdrng (krng)
>[    0.420681] NET: Registered protocol family 38
>[    0.420756] Key type asymmetric registered
>[    0.420828] Asymmetric key parser 'x509' registered
>[    0.420927] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    0.421063] io scheduler noop registered (default)
>[    0.421137] io scheduler deadline registered
>[    0.421230] io scheduler cfq registered
>[    0.421474] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>[    0.421949] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.422035] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.422139] intel_idle: MWAIT substates: 0x21120
>[    0.422140] intel_idle: v0.4 model 0x2A
>[    0.422141] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.623545] ACPI: AC Adapter [ADP0] (on-line)
>[    0.623680] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>[    0.623788] ACPI: Power Button [PWRB]
>[    0.623885] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
>[    0.623991] ACPI: Sleep Button [SLPB]
>[    0.624088] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
>[    0.624706] ACPI: Lid Switch [LID0]
>[    0.624807] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>[    0.624911] ACPI: Power Button [PWRF]
>[    0.625325] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.625402] ACPI: Thermal Zone [TZ00] (36 C)
>[    0.625664] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.625740] ACPI: Thermal Zone [TZ01] (36 C)
>[    0.625836] GHES: HEST is not enabled!
>[    0.625999] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.630524] Non-volatile memory driver v1.3
>[    0.630603] Linux agpgart interface v0.103
>[    0.630771] ahci 0000:00:1f.2: version 3.0
>[    0.630866] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
>[    0.630928] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
>[    0.631062] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
>[    0.632944] scsi0 : ahci
>[    0.633130] scsi1 : ahci
>[    0.633302] scsi2 : ahci
>[    0.633426] scsi3 : ahci
>[    0.633566] scsi4 : ahci
>[    0.633711] scsi5 : ahci
>[    0.633811] ata1: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08100 irq 41
>[    0.633941] ata2: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08180 irq 41
>[    0.634045] ata3: DUMMY
>[    0.634115] ata4: DUMMY
>[    0.634185] ata5: DUMMY
>[    0.634289] ata6: DUMMY
>[    0.634428] libphy: Fixed MDIO Bus: probed
>[    0.634636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.634715] ehci-pci: EHCI PCI platform driver
>[    0.634885] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.634991] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.635106] ehci-pci 0000:00:1a.0: debug port 2
>[    0.638855] ACPI: Battery Slot [BAT0] (battery present)
>[    0.639090] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.639105] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf1c0a000
>[    0.644508] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.644619] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.644697] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.644801] usb usb1: Product: EHCI Host Controller
>[    0.644876] usb usb1: Manufacturer: Linux 3.13.5-200.fc20.x86_64 ehci_hcd
>[    0.644954] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.645118] hub 1-0:1.0: USB hub found
>[    0.645195] hub 1-0:1.0: 2 ports detected
>[    0.645422] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.645539] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.645654] ehci-pci 0000:00:1d.0: debug port 2
>[    0.649612] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.649626] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1c09000
>[    0.655503] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.655605] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.655683] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.655786] usb usb2: Product: EHCI Host Controller
>[    0.655860] usb usb2: Manufacturer: Linux 3.13.5-200.fc20.x86_64 ehci_hcd
>[    0.655937] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.656086] hub 2-0:1.0: USB hub found
>[    0.656162] hub 2-0:1.0: 2 ports detected
>[    0.656303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.656379] ohci-pci: OHCI PCI platform driver
>[    0.656458] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.656612] xhci_hcd 0000:04:00.0: xHCI Host Controller
>[    0.656718] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
>[    0.657009] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
>[    0.657014] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
>[    0.657018] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
>[    0.657022] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
>[    0.657027] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
>[    0.657146] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.657223] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.657326] usb usb3: Product: xHCI Host Controller
>[    0.657401] usb usb3: Manufacturer: Linux 3.13.5-200.fc20.x86_64 xhci_hcd
>[    0.657478] usb usb3: SerialNumber: 0000:04:00.0
>[    0.657631] hub 3-0:1.0: USB hub found
>[    0.657711] hub 3-0:1.0: 2 ports detected
>[    0.657843] xhci_hcd 0000:04:00.0: xHCI Host Controller
>[    0.657950] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
>[    0.660426] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    0.660524] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.660629] usb usb4: Product: xHCI Host Controller
>[    0.660702] usb usb4: Manufacturer: Linux 3.13.5-200.fc20.x86_64 xhci_hcd
>[    0.660779] usb usb4: SerialNumber: 0000:04:00.0
>[    0.660924] hub 4-0:1.0: USB hub found
>[    0.661004] hub 4-0:1.0: 2 ports detected
>[    0.666521] usbcore: registered new interface driver usbserial
>[    0.666601] usbcore: registered new interface driver usbserial_generic
>[    0.666682] usbserial: USB Serial support registered for generic
>[    0.666781] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    0.672014] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.672094] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.672223] mousedev: PS/2 mouse device common for all mice
>[    0.672503] rtc_cmos 00:04: RTC can wake from S4
>[    0.672697] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    0.672816] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.672972] device-mapper: uevent: version 1.0.3
>[    0.673103] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    0.673220] Intel P-state driver initializing.
>[    0.673302] Intel pstate controlling: cpu 0
>[    0.673387] Intel pstate controlling: cpu 1
>[    0.673472] Intel pstate controlling: cpu 2
>[    0.673563] Intel pstate controlling: cpu 3
>[    0.673799] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.673938] usbcore: registered new interface driver usbhid
>[    0.674012] usbhid: USB HID core driver
>[    0.674118] drop_monitor: Initializing network drop monitor service
>[    0.674251] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    0.674392] TCP: cubic registered
>[    0.674464] Initializing XFRM netlink socket
>[    0.674623] NET: Registered protocol family 10
>[    0.674841] mip6: Mobile IPv6
>[    0.674914] NET: Registered protocol family 17
>[    0.675309] Loading compiled-in X.509 certificates
>[    0.676353] Loaded X.509 cert 'Fedora kernel signing key: c8ca538e944b80335131f32fc0a6f554e48da178'
>[    0.676469] registered taskstats version 1
>[    0.677828]   Magic number: 6:807:823
>[    0.677994] rtc_cmos 00:04: setting system clock to 2014-03-04 07:48:10 UTC (1393919290)
>[    0.678147] PM: Hibernation image not present or could not be loaded.
>[    0.679997] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>[    0.938468] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    0.938600] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.940802] ata2.00: ATAPI: HL-DT-STDVD+/-RW GT32N, A203, max UDMA/100
>[    0.944317] ata2.00: configured for UDMA/100
>[    0.946518] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    0.950260] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    0.951151] ata1.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133
>[    0.951251] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    0.960257] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[    0.961151] ata1.00: configured for UDMA/133
>[    0.961691] scsi 0:0:0:0: Direct-Access     ATA      OCZ-AGILITY3     2.15 PQ: 0 ANSI: 5
>[    0.962182] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    0.962189] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    0.962893] sd 0:0:0:0: [sda] Write Protect is off
>[    0.963020] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    0.963112] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.964233] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GT32N    A203 PQ: 0 ANSI: 5
>[    0.964419]  sda: sda1 sda2 < sda5 sda6 > sda3
>[    0.965240] sd 0:0:0:0: [sda] Attached SCSI disk
>[    0.968275] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    0.968461] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    0.968803] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    0.968946] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    0.971084] Freeing unused kernel memory: 1424K (ffffffff81d0c000 - ffffffff81e70000)
>[    0.971207] Write protecting the kernel read-only data: 12288k
>[    0.977041] Freeing unused kernel memory: 1420K (ffff88000169d000 - ffff880001800000)
>[    0.981266] Freeing unused kernel memory: 1116K (ffff880001ae9000 - ffff880001c00000)
>[    0.986386] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    0.986759] systemd[1]: Running in initial RAM disk.
>[    0.987372] systemd[1]: Set hostname to <weskdell>.
>[    0.988296] random: systemd urandom read with 12 bits of entropy available
>[    0.994875] systemd[1]: Expecting device dev-disk-by\x2dlabel-Linux.device...
>[    0.995244] systemd[1]: Starting -.slice.
>[    0.995848] systemd[1]: Created slice -.slice.
>[    0.995945] systemd[1]: Starting System Slice.
>[    0.996448] systemd[1]: Created slice System Slice.
>[    0.996543] systemd[1]: Starting Slices.
>[    0.996951] systemd[1]: Reached target Slices.
>[    0.997042] systemd[1]: Starting Timers.
>[    0.997497] systemd[1]: Reached target Timers.
>[    0.997642] systemd[1]: Starting udev Kernel Socket.
>[    0.998094] systemd[1]: Listening on udev Kernel Socket.
>[    0.998192] systemd[1]: Starting udev Control Socket.
>[    0.998639] systemd[1]: Listening on udev Control Socket.
>[    0.998734] systemd[1]: Starting Journal Socket.
>[    0.999190] systemd[1]: Listening on Journal Socket.
>[    0.999460] systemd[1]: Started dracut cmdline hook.
>[    0.999667] systemd[1]: Starting dracut pre-udev hook...
>[    1.000466] systemd[1]: Starting Create list of required static device nodes for the current kernel...
>[    1.001364] systemd[1]: Started Load Kernel Modules.
>[    1.001467] systemd[1]: Starting Sockets.
>[    1.001885] systemd[1]: Reached target Sockets.
>[    1.001990] systemd[1]: Starting Setup Virtual Console...
>[    1.002831] systemd[1]: Starting Journal Service...
>[    1.005117] systemd[1]: Started Journal Service.
>[    1.010976] systemd-journald[81]: Vacuuming done, freed 0 bytes
>[    1.054566] systemd-udevd[124]: starting version 208
>[    1.060634] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.060718] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.061038] hub 1-1:1.0: USB hub found
>[    1.061251] hub 1-1:1.0: 6 ports detected
>[    1.082796] wmi: Mapper loaded
>[    1.090163] [drm] Initialized drm 1.1.0 20060810
>[    1.107979] [drm] Memory usable by graphics device = 2048M
>[    1.142434] i915 0000:00:02.0: irq 47 for MSI/MSI-X
>[    1.142444] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.142523] [drm] Driver supports precise vblank timestamp query.
>[    1.142699] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
>[    1.165854] [drm] Wrong MCH_SSKPD value: 0x16040307
>[    1.165935] [drm] This can cause pipe underruns and display issues.
>[    1.166014] [drm] Please upgrade your BIOS to fix this.
>[    1.171299] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.204132] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[    1.235222] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
>[    1.246537] fbcon: inteldrmfb (fb0) is primary device
>[    1.288514] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.288516] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.288800] hub 2-1:1.0: USB hub found
>[    1.288884] hub 2-1:1.0: 8 ports detected
>[    1.363462] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
>[    1.395207] tsc: Refined TSC clocksource calibration: 2294.786 MHz
>[    1.450289] usb 1-1.4: New USB device found, idVendor=0408, idProduct=2fb1
>[    1.450292] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
>[    1.450295] usb 1-1.4: Product: Laptop_Integrated_Webcam_2HDM
>[    1.450296] usb 1-1.4: Manufacturer: CN07CN2C7866415U2A8EA00
>[    1.548586] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0x8a0400, board id: 3655, fw id: 662324
>[    1.564393] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
>[    1.594739] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
>[    1.644344] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
>[    1.644347] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.090739] Console: switching to colour frame buffer device 240x67
>[    2.101406] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.101408] i915 0000:00:02.0: registered panic notifier
>[    2.101883] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20131115/video-1111)
>[    2.101984] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
>[    2.102162] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:33/LNXVIDEO:00/input/input7
>[    2.112863] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.113357] acpi device:35: registered as cooling_device4
>[    2.113477] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
>[    2.113615] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    2.199263] systemd-journald[81]: Received SIGTERM
>[    2.255706] type=1404 audit(1393919292.077:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>[    2.394787] Switched to clocksource tsc
>[    2.434782] SELinux: 2048 avtab hash slots, 97097 rules.
>[    2.448142] SELinux: 2048 avtab hash slots, 97097 rules.
>[    2.463589] SELinux:  8 users, 83 roles, 4733 types, 271 bools, 1 sens, 1024 cats
>[    2.463593] SELinux:  83 classes, 97097 rules
>[    2.466545] SELinux:  Completing initialization.
>[    2.466548] SELinux:  Setting up existing superblocks.
>[    2.466554] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    2.466564] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>[    2.466570] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>[    2.466574] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[    2.466584] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    2.466611] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>[    2.467217] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>[    2.467789] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>[    2.467793] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>[    2.467797] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>[    2.467799] SELinux: initialized (dev aio, type aio), not configured for labeling
>[    2.467801] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>[    2.467819] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    2.467824] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[    2.467830] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>[    2.467837] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    2.468059] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>[    2.468061] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    2.468065] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    2.468138] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    2.468166] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    2.468172] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
>[    2.468174] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    2.468177] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    2.468181] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    2.468187] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    2.468189] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    2.468192] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    2.468194] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    2.468199] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    2.468201] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    2.468208] SELinux: initialized (dev sda5, type ext4), uses xattr
>[    2.484420] type=1403 audit(1393919292.305:3): policy loaded auid=4294967295 ses=4294967295
>[    2.493887] systemd[1]: Successfully loaded SELinux policy in 239.258ms.
>[    2.505074] systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
>[    2.534837] systemd[1]: Relabelled /dev and /run in 20.487ms.
>[    2.657009] systemd-readahead[228]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    2.666723] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[    2.681394] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    2.723249] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
>[    2.739835] systemd-journald[248]: Vacuuming done, freed 0 bytes
>[    2.752038] random: nonblocking pool is initialized
>[    2.757470] systemd-udevd[254]: starting version 208
>[    2.766766] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    2.772991] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>[    2.787782] EXT4-fs (sda5): re-mounted. Opts: discard
>[    2.814018] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    2.890922] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    2.899594] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
>[    2.901537] media: Linux media interface: v0.10
>[    2.901571] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.909260] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
>[    2.911961] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
>[    2.913862] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.915749] Linux video capture interface: v2.00
>[    2.916150] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
>[    2.916153] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
>[    2.916154] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.916156] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
>[    2.916159] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
>[    2.916159] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.916160] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    2.916313] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[    2.931277] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    2.932801] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
>[    2.934613] r8169 0000:06:00.0: irq 49 for MSI/MSI-X
>[    2.934775] r8169 0000:06:00.0 eth0: RTL8168e/8111e at 0xffffc90000c42000, 14:fe:b5:b6:bf:45, XID 0c200000 IRQ 49
>[    2.936244] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[    2.939187] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
>[    2.941757] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.947947] Bluetooth: Core ver 2.17
>[    2.949997] NET: Registered protocol family 31
>[    2.952445] Bluetooth: HCI device and connection manager initialized
>[    2.955592] Bluetooth: HCI socket layer initialized
>[    2.958080] Bluetooth: L2CAP socket layer initialized
>[    2.960566] Bluetooth: SCO socket layer initialized
>[    2.963217] cfg80211: Calling CRDA to update world regulatory domain
>[    2.968578] usbcore: registered new interface driver btusb
>[    2.978209] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2HDM (0408:2fb1)
>[    2.980471] Intel(R) Wireless WiFi driver for Linux, in-tree:d
>[    2.982034] Copyright(c) 2003-2013 Intel Corporation
>[    2.983764] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>[    2.985838] iwlwifi 0000:03:00.0: irq 50 for MSI/MSI-X
>[    2.987481] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[    3.007703] uvcvideo: No streaming interface found for terminal 6.
>[    3.007765] input: Laptop_Integrated_Webcam_2HDM as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input9
>[    3.010772] usbcore: registered new interface driver uvcvideo
>[    3.012270] USB Video Class driver (1.1.1)
>[    3.015764] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
>[    3.020341] hda_codec: ALC665: SKU not ready 0x598301f0
>[    3.023677] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
>[    3.023682] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    3.023685] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=2 (0x1b/0x19/0x0/0x0/0x0)
>[    3.023686] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[    3.023688] ALSA sound/pci/hda/hda_auto_parser.c:405    dig-out=0x1e/0x0
>[    3.023689] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[    3.023692] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x1a
>[    3.023694] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x12
>[    3.023697] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
>[    3.023699] ALSA sound/pci/hda/patch_realtek.c:572 realtek: Enable default setup for auto mode as fallback
>[    3.040961] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
>[    3.050366] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>[    3.050433] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x15
>[    3.056861] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>[    3.059886] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>[    3.062960] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x15
>[    3.065969] microcode: CPU0 updated to revision 0x29, date = 2013-06-12
>[    3.069601] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[    3.076110] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[    3.079290] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[    3.082109] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
>[    3.083980] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[    3.084026] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[    3.084381] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[    3.094384] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x15
>[    3.097314] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
>[    3.100179] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
>[    3.103071] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
>[    3.106189] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[    3.109172] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x15
>[    3.112437] microcode: CPU3 updated to revision 0x29, date = 2013-06-12
>[    3.115877] perf_event_intel: PEBS enabled due to microcode update
>[    3.122062] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    3.150802] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>[    3.179126] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    3.184163] alg: No test for crc32 (crc32-pclmul)
>[    3.219782] iTCO_vendor_support: vendor-support=0
>[    3.225323] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    3.225379] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
>[    3.226382] cfg80211: World regulatory domain updated:
>[    3.226401] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[    3.226402] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[    3.226403] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[    3.226404] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[    3.226405] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[    3.226406] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[    3.226407] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[    3.255052] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    3.255952] input: Dell WMI hotkeys as /devices/virtual/input/input14
>[    3.267294] systemd-udevd[272]: renamed network interface wlan0 to wlp3s0
>[    3.286278] systemd-udevd[271]: renamed network interface eth0 to p5p1
>[    3.295411] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
>[    3.297792] SELinux: initialized (dev sda1, type ext4), uses xattr
>[    3.304035] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard
>[    3.304042] SELinux: initialized (dev sda6, type ext4), uses xattr
>[    3.359693] systemd-journald[248]: Received request to flush runtime journal from PID 1
>[    3.416748] type=1305 audit(1393937293.239:4): audit_pid=428 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
>[    3.870927] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[    3.930272] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[    3.998875] Ebtables v2.0 registered
>[    4.022796] Bridge firewalling registered
>[    4.114265] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[    4.115667] Bluetooth: BNEP filters: protocol multicast
>[    4.117252] Bluetooth: BNEP socket layer initialized
>[    4.468346] r8169 0000:06:00.0 p5p1: link down
>[    4.468550] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[    4.471034] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[    4.477736] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[    4.540349] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[    4.547104] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[    4.605141] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[    5.695079] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[    5.705713] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[    5.708582] wlp3s0: authenticated
>[    5.708928] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[    5.712369] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=3)
>[    5.719149] wlp3s0: associated
>[    5.719206] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[    7.369112] fuse init (API version 7.22)
>[    7.375742] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[    7.386172] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>[    8.425710] Bluetooth: RFCOMM TTY layer initialized
>[    8.425724] Bluetooth: RFCOMM socket layer initialized
>[    8.425833] Bluetooth: RFCOMM ver 1.11
>[   28.929238] ACPI Warning: _BQC returned an invalid level (20131115/video-509)
>[ 4983.835907] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[ 4983.846290] cfg80211: Calling CRDA to update world regulatory domain
>[ 4983.884156] cfg80211: World regulatory domain updated:
>[ 4983.884161] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 4983.884163] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 4983.884177] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 4983.884179] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[ 4983.884181] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[ 4983.884182] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[ 4983.884183] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[ 4983.918293] PM: Syncing filesystems ... done.
>[ 4983.983600] PM: Preparing system for mem sleep
>[ 4983.984153] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[ 4983.985605] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[ 4983.986500] PM: Entering mem sleep
>[ 4983.986575] Suspending console(s) (use no_console_suspend to debug)
>[ 4983.986873] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 4983.987096] sd 0:0:0:0: [sda] Stopping disk
>[ 4984.440351] PM: suspend of devices complete after 453.854 msecs
>[ 4984.440537] PM: late suspend of devices complete after 0.183 msecs
>[ 4984.440740] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[ 4984.451327] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[ 4984.473371] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[ 4984.484530] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[ 4984.506219] PM: noirq suspend of devices complete after 65.714 msecs
>[ 4984.506485] ACPI: Preparing to enter system sleep state S3
>[ 4984.507578] PM: Saving platform NVS memory
>[ 4984.508512] Disabling non-boot CPUs ...
>[ 4984.508810] Broke affinity for irq 41
>[ 4984.510209] kvm: disabling virtualization on CPU1
>[ 4984.510516] smpboot: CPU 1 is now offline
>[ 4984.512153] kvm: disabling virtualization on CPU2
>[ 4984.512168] smpboot: CPU 2 is now offline
>[ 4984.512743] Broke affinity for irq 50
>[ 4984.513754] kvm: disabling virtualization on CPU3
>[ 4984.513764] smpboot: CPU 3 is now offline
>[ 4984.515075] ACPI: Low-level resume complete
>[ 4984.515115] PM: Restoring platform NVS memory
>[ 4984.515814] CPU0: Thermal monitoring handled by SMI
>[ 4984.515821] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[ 4984.515853] Enabling non-boot CPUs ...
>[ 4984.515885] x86: Booting SMP configuration:
>[ 4984.515885] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 4984.527336] Disabled fast string operations
>[ 4984.527350] CPU1: Thermal monitoring handled by SMI
>[ 4984.527379] kvm: enabling virtualization on CPU1
>[ 4984.529739] Intel pstate controlling: cpu 1
>[ 4984.529835] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[ 4984.531379] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[ 4984.531388] CPU1 is up
>[ 4984.531403] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[ 4984.542426] Disabled fast string operations
>[ 4984.542440] CPU2: Thermal monitoring handled by SMI
>[ 4984.542465] kvm: enabling virtualization on CPU2
>[ 4984.544848] Intel pstate controlling: cpu 2
>[ 4984.544980] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[ 4984.545331] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[ 4984.545334] CPU2 is up
>[ 4984.545351] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[ 4984.556373] Disabled fast string operations
>[ 4984.556386] CPU3: Thermal monitoring handled by SMI
>[ 4984.556411] kvm: enabling virtualization on CPU3
>[ 4984.558632] Intel pstate controlling: cpu 3
>[ 4984.558671] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[ 4984.558675] CPU3 is up
>[ 4984.562114] ACPI: Waking up from system sleep state S3
>[ 4984.599989] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[ 4984.621947] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[ 4984.654960] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[ 4984.666078] PM: noirq resume of devices complete after 98.386 msecs
>[ 4984.666287] PM: early resume of devices complete after 0.162 msecs
>[ 4984.666389] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[ 4984.666603] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[ 4984.666676] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[ 4984.668927] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[ 4984.726021] [drm] Wrong MCH_SSKPD value: 0x16040307
>[ 4984.726022] [drm] This can cause pipe underruns and display issues.
>[ 4984.726022] [drm] Please upgrade your BIOS to fix this.
>[ 4984.873929] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[ 4984.970742] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 4984.972729] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[ 4984.974737] ata2.00: configured for UDMA/100
>[ 4984.975319] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[ 4984.985245] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[ 4984.986102] ata1.00: configured for UDMA/133
>[ 4984.986231] sd 0:0:0:0: [sda] Starting disk
>[ 4985.032815] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[ 4985.300949] PM: resume of devices complete after 634.982 msecs
>[ 4985.302381] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[ 4985.302469] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[ 4985.302555] PM: Finishing wakeup.
>[ 4985.302582] r8169 0000:06:00.0: no hotplug settings from platform
>[ 4985.302561] Restarting tasks ... done.
>[ 4985.304941] video LNXVIDEO:00: Restoring backlight state
>[ 4985.304949] video LNXVIDEO:01: Restoring backlight state
>[ 4985.496239] r8169 0000:06:00.0 p5p1: link down
>[ 4985.496654] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[ 4985.497727] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[ 4985.504424] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[ 4985.580808] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[ 4986.586866] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[ 4986.753172] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[ 4986.762226] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[ 4986.765074] wlp3s0: authenticated
>[ 4986.765743] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[ 4986.769055] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[ 4986.771941] wlp3s0: associated
>[ 4986.771971] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[ 6839.487289] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[ 6839.496070] cfg80211: Calling CRDA to update world regulatory domain
>[ 6839.546399] cfg80211: World regulatory domain updated:
>[ 6839.546406] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 6839.546408] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6839.546410] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6839.546412] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[ 6839.546413] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[ 6839.546414] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[ 6839.546416] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[ 6839.583862] PM: Syncing filesystems ... done.
>[ 6839.606293] PM: Preparing system for mem sleep
>[ 6839.607021] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[ 6839.608591] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[ 6839.609785] PM: Entering mem sleep
>[ 6839.609863] Suspending console(s) (use no_console_suspend to debug)
>[ 6839.610139] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 6839.610177] sd 0:0:0:0: [sda] Stopping disk
>[ 6839.811879] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[ 6840.263636] PM: suspend of devices complete after 654.000 msecs
>[ 6840.263851] PM: late suspend of devices complete after 0.211 msecs
>[ 6840.264081] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[ 6840.274659] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[ 6840.296752] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[ 6840.307928] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[ 6840.329607] PM: noirq suspend of devices complete after 65.785 msecs
>[ 6840.330195] ACPI: Preparing to enter system sleep state S3
>[ 6840.331717] PM: Saving platform NVS memory
>[ 6840.333788] Disabling non-boot CPUs ...
>[ 6840.334428] Broke affinity for irq 41
>[ 6840.334942] Broke affinity for irq 50
>[ 6840.335968] kvm: disabling virtualization on CPU1
>[ 6840.335989] smpboot: CPU 1 is now offline
>[ 6840.338776] kvm: disabling virtualization on CPU2
>[ 6840.338792] smpboot: CPU 2 is now offline
>[ 6840.340712] kvm: disabling virtualization on CPU3
>[ 6840.340719] smpboot: CPU 3 is now offline
>[ 6840.342315] ACPI: Low-level resume complete
>[ 6840.342354] PM: Restoring platform NVS memory
>[ 6840.343050] CPU0: Thermal monitoring handled by SMI
>[ 6840.343056] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[ 6840.343097] Enabling non-boot CPUs ...
>[ 6840.343130] x86: Booting SMP configuration:
>[ 6840.343131] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 6840.354591] Disabled fast string operations
>[ 6840.354605] CPU1: Thermal monitoring handled by SMI
>[ 6840.354633] kvm: enabling virtualization on CPU1
>[ 6840.356980] Intel pstate controlling: cpu 1
>[ 6840.357071] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[ 6840.358514] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[ 6840.358523] CPU1 is up
>[ 6840.358540] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[ 6840.369563] Disabled fast string operations
>[ 6840.369577] CPU2: Thermal monitoring handled by SMI
>[ 6840.369604] kvm: enabling virtualization on CPU2
>[ 6840.371978] Intel pstate controlling: cpu 2
>[ 6840.372076] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[ 6840.373074] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[ 6840.373084] CPU2 is up
>[ 6840.373101] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[ 6840.384223] Disabled fast string operations
>[ 6840.384237] CPU3: Thermal monitoring handled by SMI
>[ 6840.384259] kvm: enabling virtualization on CPU3
>[ 6840.386489] Intel pstate controlling: cpu 3
>[ 6840.386526] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[ 6840.386529] CPU3 is up
>[ 6840.389908] ACPI: Waking up from system sleep state S3
>[ 6840.428488] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[ 6840.450442] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[ 6840.484451] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[ 6840.495567] PM: noirq resume of devices complete after 99.765 msecs
>[ 6840.495766] PM: early resume of devices complete after 0.152 msecs
>[ 6840.495872] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[ 6840.496076] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[ 6840.496142] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[ 6840.496148] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[ 6840.558486] [drm] Wrong MCH_SSKPD value: 0x16040307
>[ 6840.558487] [drm] This can cause pipe underruns and display issues.
>[ 6840.558487] [drm] Please upgrade your BIOS to fix this.
>[ 6840.703498] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[ 6840.800217] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[ 6840.802231] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 6840.807829] ata2.00: configured for UDMA/100
>[ 6840.810645] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[ 6840.820639] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[ 6840.821449] ata1.00: configured for UDMA/133
>[ 6840.821608] sd 0:0:0:0: [sda] Starting disk
>[ 6840.841426] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[ 6841.121269] PM: resume of devices complete after 625.809 msecs
>[ 6841.122475] PM: Finishing wakeup.
>[ 6841.122642] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[ 6841.122764] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[ 6841.122845] r8169 0000:06:00.0: no hotplug settings from platform
>[ 6841.122478] Restarting tasks ... done.
>[ 6841.127195] video LNXVIDEO:00: Restoring backlight state
>[ 6841.127203] video LNXVIDEO:01: Restoring backlight state
>[ 6841.297720] r8169 0000:06:00.0 p5p1: link down
>[ 6841.297760] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[ 6841.298643] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[ 6841.305360] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[ 6841.372827] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[ 6841.734762] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[ 6842.407424] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[ 6842.416395] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[ 6842.419112] wlp3s0: authenticated
>[ 6842.419352] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[ 6842.422719] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[ 6842.425609] wlp3s0: associated
>[ 6842.425670] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[10087.673048] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[10087.679654] cfg80211: Calling CRDA to update world regulatory domain
>[10087.695716] cfg80211: World regulatory domain updated:
>[10087.695720] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[10087.695721] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10087.695722] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10087.695723] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[10087.695724] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[10087.695725] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[10087.695726] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[10087.774092] PM: Syncing filesystems ... done.
>[10087.798807] PM: Preparing system for mem sleep
>[10087.799500] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[10087.801059] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[10087.802222] PM: Entering mem sleep
>[10087.802305] Suspending console(s) (use no_console_suspend to debug)
>[10087.802523] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[10087.802556] sd 0:0:0:0: [sda] Stopping disk
>[10088.260011] PM: suspend of devices complete after 457.840 msecs
>[10088.260214] PM: late suspend of devices complete after 0.199 msecs
>[10088.260452] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[10088.271029] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[10088.293129] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[10088.304298] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[10088.325966] PM: noirq suspend of devices complete after 65.783 msecs
>[10088.326554] ACPI: Preparing to enter system sleep state S3
>[10088.328466] PM: Saving platform NVS memory
>[10088.330576] Disabling non-boot CPUs ...
>[10088.332716] kvm: disabling virtualization on CPU1
>[10088.332738] smpboot: CPU 1 is now offline
>[10088.334960] kvm: disabling virtualization on CPU2
>[10088.334972] smpboot: CPU 2 is now offline
>[10088.335810] Broke affinity for irq 41
>[10088.335927] Broke affinity for irq 50
>[10088.336943] kvm: disabling virtualization on CPU3
>[10088.336961] smpboot: CPU 3 is now offline
>[10088.338656] ACPI: Low-level resume complete
>[10088.338695] PM: Restoring platform NVS memory
>[10088.339390] CPU0: Thermal monitoring handled by SMI
>[10088.339396] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[10088.339445] Enabling non-boot CPUs ...
>[10088.339477] x86: Booting SMP configuration:
>[10088.339478] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[10088.350938] Disabled fast string operations
>[10088.350953] CPU1: Thermal monitoring handled by SMI
>[10088.350980] kvm: enabling virtualization on CPU1
>[10088.353321] Intel pstate controlling: cpu 1
>[10088.353409] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[10088.354839] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[10088.354848] CPU1 is up
>[10088.354864] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[10088.365887] Disabled fast string operations
>[10088.365901] CPU2: Thermal monitoring handled by SMI
>[10088.365926] kvm: enabling virtualization on CPU2
>[10088.368295] Intel pstate controlling: cpu 2
>[10088.368390] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[10088.369384] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[10088.369393] CPU2 is up
>[10088.369410] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[10088.380432] Disabled fast string operations
>[10088.380445] CPU3: Thermal monitoring handled by SMI
>[10088.380469] kvm: enabling virtualization on CPU3
>[10088.382682] Intel pstate controlling: cpu 3
>[10088.382720] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[10088.382723] CPU3 is up
>[10088.386240] ACPI: Waking up from system sleep state S3
>[10088.424986] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[10088.446949] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[10088.480966] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[10088.492084] PM: noirq resume of devices complete after 100.122 msecs
>[10088.492283] PM: early resume of devices complete after 0.152 msecs
>[10088.492404] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[10088.492569] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[10088.492853] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[10088.492911] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[10088.552035] [drm] Wrong MCH_SSKPD value: 0x16040307
>[10088.552035] [drm] This can cause pipe underruns and display issues.
>[10088.552036] [drm] Please upgrade your BIOS to fix this.
>[10088.699946] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[10088.797739] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[10088.799728] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[10088.803977] ata2.00: configured for UDMA/100
>[10088.808146] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[10088.818104] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[10088.818931] ata1.00: configured for UDMA/133
>[10088.820950] sd 0:0:0:0: [sda] Starting disk
>[10088.847862] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[10089.127785] PM: resume of devices complete after 635.822 msecs
>[10089.128966] PM: Finishing wakeup.
>[10089.129127] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[10089.137638] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[10089.137705] r8169 0000:06:00.0: no hotplug settings from platform
>[10089.128969] Restarting tasks ... done.
>[10089.152722] video LNXVIDEO:00: Restoring backlight state
>[10089.152728] video LNXVIDEO:01: Restoring backlight state
>[10089.317251] r8169 0000:06:00.0 p5p1: link down
>[10089.317473] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[10089.320313] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[10089.327048] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[10089.384515] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[10089.661299] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[10090.499616] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[10090.507223] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[10090.509992] wlp3s0: authenticated
>[10090.510789] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[10090.514099] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[10090.516383] wlp3s0: associated
>[10090.516415] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[11812.402562] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[11812.413885] cfg80211: Calling CRDA to update world regulatory domain
>[11812.450277] cfg80211: World regulatory domain updated:
>[11812.450283] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[11812.450285] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[11812.450287] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[11812.450289] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[11812.450290] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[11812.450291] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[11812.450293] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[11812.509380] PM: Syncing filesystems ... done.
>[11812.534833] PM: Preparing system for mem sleep
>[11812.535944] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[11812.537363] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[11812.538330] PM: Entering mem sleep
>[11812.538404] Suspending console(s) (use no_console_suspend to debug)
>[11812.538629] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[11812.538664] sd 0:0:0:0: [sda] Stopping disk
>[11813.001094] PM: suspend of devices complete after 462.831 msecs
>[11813.001322] PM: late suspend of devices complete after 0.224 msecs
>[11813.001551] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[11813.012123] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[11813.034221] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[11813.045514] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[11813.067065] PM: noirq suspend of devices complete after 65.773 msecs
>[11813.067444] ACPI: Preparing to enter system sleep state S3
>[11813.069439] PM: Saving platform NVS memory
>[11813.071317] Disabling non-boot CPUs ...
>[11813.072831] Broke affinity for irq 50
>[11813.073857] kvm: disabling virtualization on CPU1
>[11813.073876] smpboot: CPU 1 is now offline
>[11813.075947] kvm: disabling virtualization on CPU2
>[11813.075956] smpboot: CPU 2 is now offline
>[11813.076585] Broke affinity for irq 41
>[11813.077717] kvm: disabling virtualization on CPU3
>[11813.077733] smpboot: CPU 3 is now offline
>[11813.079330] ACPI: Low-level resume complete
>[11813.079371] PM: Restoring platform NVS memory
>[11813.080070] CPU0: Thermal monitoring handled by SMI
>[11813.080076] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[11813.080117] Enabling non-boot CPUs ...
>[11813.080149] x86: Booting SMP configuration:
>[11813.080150] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[11813.091611] Disabled fast string operations
>[11813.091624] CPU1: Thermal monitoring handled by SMI
>[11813.091652] kvm: enabling virtualization on CPU1
>[11813.094031] Intel pstate controlling: cpu 1
>[11813.094132] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[11813.094762] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[11813.094766] CPU1 is up
>[11813.094781] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[11813.105803] Disabled fast string operations
>[11813.105817] CPU2: Thermal monitoring handled by SMI
>[11813.105843] kvm: enabling virtualization on CPU2
>[11813.108244] Intel pstate controlling: cpu 2
>[11813.108340] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[11813.109337] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[11813.109347] CPU2 is up
>[11813.109364] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[11813.120386] Disabled fast string operations
>[11813.120399] CPU3: Thermal monitoring handled by SMI
>[11813.120421] kvm: enabling virtualization on CPU3
>[11813.122634] Intel pstate controlling: cpu 3
>[11813.122671] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[11813.122675] CPU3 is up
>[11813.126243] ACPI: Waking up from system sleep state S3
>[11813.166935] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[11813.188910] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[11813.222922] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[11813.234038] PM: noirq resume of devices complete after 99.740 msecs
>[11813.234235] PM: early resume of devices complete after 0.151 msecs
>[11813.234529] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[11813.234840] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[11813.234899] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[11813.235783] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[11813.295982] [drm] Wrong MCH_SSKPD value: 0x16040307
>[11813.295983] [drm] This can cause pipe underruns and display issues.
>[11813.295983] [drm] Please upgrade your BIOS to fix this.
>[11813.445766] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[11813.540690] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[11813.542121] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[11813.544691] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[11813.548036] ata2.00: configured for UDMA/100
>[11813.552092] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[11813.552940] ata1.00: configured for UDMA/133
>[11813.553078] sd 0:0:0:0: [sda] Starting disk
>[11813.603900] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[11814.391248] hda-codec: out of range cmd 0:20:400:ffffffff
>[11814.393755] PM: resume of devices complete after 1160.106 msecs
>[11814.394260] PM: Finishing wakeup.
>[11814.394392] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[11814.394261] Restarting tasks ... done.
>[11814.397820] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[11814.398932] r8169 0000:06:00.0: no hotplug settings from platform
>[11814.418571] video LNXVIDEO:00: Restoring backlight state
>[11814.418576] video LNXVIDEO:01: Restoring backlight state
>[11814.568973] r8169 0000:06:00.0 p5p1: link down
>[11814.569020] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[11814.571265] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[11814.578174] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[11814.640738] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[11815.051929] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[11815.677075] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[11815.684940] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[11815.687678] wlp3s0: authenticated
>[11815.688611] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[11815.692050] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[11815.694452] wlp3s0: associated
>[11815.694529] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[12172.787056] sr0: CDROM not ready.  Make sure there is a disc in the drive.
>[12726.315026] perf samples too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
>[16384.985140] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[16384.999082] cfg80211: Calling CRDA to update world regulatory domain
>[16385.044234] cfg80211: World regulatory domain updated:
>[16385.044245] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16385.044247] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[16385.044249] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[16385.044251] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[16385.044252] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[16385.044254] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[16385.044255] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[16385.095618] PM: Syncing filesystems ... done.
>[16385.111310] PM: Preparing system for mem sleep
>[16385.112195] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[16385.113814] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[16385.114931] PM: Entering mem sleep
>[16385.115001] Suspending console(s) (use no_console_suspend to debug)
>[16385.115294] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[16385.115329] sd 0:0:0:0: [sda] Stopping disk
>[16385.580741] PM: suspend of devices complete after 465.883 msecs
>[16385.580966] PM: late suspend of devices complete after 0.222 msecs
>[16385.581230] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[16385.591772] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[16385.613824] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[16385.624997] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[16385.646666] PM: noirq suspend of devices complete after 65.728 msecs
>[16385.647254] ACPI: Preparing to enter system sleep state S3
>[16385.648778] PM: Saving platform NVS memory
>[16385.650895] Disabling non-boot CPUs ...
>[16385.652946] kvm: disabling virtualization on CPU1
>[16385.652963] smpboot: CPU 1 is now offline
>[16385.655680] kvm: disabling virtualization on CPU2
>[16385.655692] smpboot: CPU 2 is now offline
>[16385.656354] Broke affinity for irq 41
>[16385.656471] Broke affinity for irq 50
>[16385.657488] kvm: disabling virtualization on CPU3
>[16385.657500] smpboot: CPU 3 is now offline
>[16385.659151] ACPI: Low-level resume complete
>[16385.659192] PM: Restoring platform NVS memory
>[16385.659889] CPU0: Thermal monitoring handled by SMI
>[16385.659896] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[16385.659941] Enabling non-boot CPUs ...
>[16385.659973] x86: Booting SMP configuration:
>[16385.659974] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[16385.671435] Disabled fast string operations
>[16385.671449] CPU1: Thermal monitoring handled by SMI
>[16385.671477] kvm: enabling virtualization on CPU1
>[16385.673817] Intel pstate controlling: cpu 1
>[16385.673909] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[16385.675326] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[16385.675335] CPU1 is up
>[16385.675351] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[16385.686374] Disabled fast string operations
>[16385.686388] CPU2: Thermal monitoring handled by SMI
>[16385.686413] kvm: enabling virtualization on CPU2
>[16385.688799] Intel pstate controlling: cpu 2
>[16385.688896] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[16385.689891] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[16385.689900] CPU2 is up
>[16385.689918] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[16385.700940] Disabled fast string operations
>[16385.700953] CPU3: Thermal monitoring handled by SMI
>[16385.700976] kvm: enabling virtualization on CPU3
>[16385.703190] Intel pstate controlling: cpu 3
>[16385.703227] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[16385.703230] CPU3 is up
>[16385.706625] ACPI: Waking up from system sleep state S3
>[16385.745556] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[16385.767526] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[16385.801539] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[16385.812654] PM: noirq resume of devices complete after 100.217 msecs
>[16385.812860] PM: early resume of devices complete after 0.159 msecs
>[16385.812969] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[16385.813238] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[16385.813284] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[16385.813332] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[16385.873605] [drm] Wrong MCH_SSKPD value: 0x16040307
>[16385.873606] [drm] This can cause pipe underruns and display issues.
>[16385.873606] [drm] Please upgrade your BIOS to fix this.
>[16386.025545] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[16386.118309] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[16386.120327] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[16386.124266] ata2.00: configured for UDMA/100
>[16386.128323] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[16386.138265] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[16386.139103] ata1.00: configured for UDMA/133
>[16386.140409] sd 0:0:0:0: [sda] Starting disk
>[16386.174449] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[16386.443488] PM: resume of devices complete after 630.948 msecs
>[16386.444123] PM: Finishing wakeup.
>[16386.447169] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[16386.447262] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[16386.444125] Restarting tasks ... done.
>[16386.447307] r8169 0000:06:00.0: no hotplug settings from platform
>[16386.447440] video LNXVIDEO:00: Restoring backlight state
>[16386.447444] video LNXVIDEO:01: Restoring backlight state
>[16386.618804] r8169 0000:06:00.0 p5p1: link down
>[16386.619023] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[16386.621945] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[16386.628672] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[16386.698662] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[16387.381640] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[16387.698224] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[16387.707379] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[16387.710157] wlp3s0: authenticated
>[16387.710424] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[16387.713742] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[16387.718486] wlp3s0: associated
>[16387.718518] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[20294.150052] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[20294.160039] cfg80211: Calling CRDA to update world regulatory domain
>[20294.177647] cfg80211: World regulatory domain updated:
>[20294.177653] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[20294.177655] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[20294.177657] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[20294.177658] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[20294.177659] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[20294.177660] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[20294.177662] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[20294.242677] PM: Syncing filesystems ... done.
>[20294.266698] PM: Preparing system for mem sleep
>[20294.267558] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[20294.269095] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[20294.270101] PM: Entering mem sleep
>[20294.270165] Suspending console(s) (use no_console_suspend to debug)
>[20294.270912] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[20294.270945] sd 0:0:0:0: [sda] Stopping disk
>[20294.726862] PM: suspend of devices complete after 456.835 msecs
>[20294.727070] PM: late suspend of devices complete after 0.204 msecs
>[20294.727309] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[20294.737860] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[20294.759963] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[20294.771127] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[20294.792807] PM: noirq suspend of devices complete after 65.767 msecs
>[20294.793395] ACPI: Preparing to enter system sleep state S3
>[20294.795908] PM: Saving platform NVS memory
>[20294.797981] Disabling non-boot CPUs ...
>[20294.800613] kvm: disabling virtualization on CPU1
>[20294.800633] smpboot: CPU 1 is now offline
>[20294.801940] Broke affinity for irq 41
>[20294.803391] kvm: disabling virtualization on CPU2
>[20294.803411] smpboot: CPU 2 is now offline
>[20294.804171] Broke affinity for irq 50
>[20294.805183] kvm: disabling virtualization on CPU3
>[20294.805196] smpboot: CPU 3 is now offline
>[20294.806545] ACPI: Low-level resume complete
>[20294.806585] PM: Restoring platform NVS memory
>[20294.807284] CPU0: Thermal monitoring handled by SMI
>[20294.807291] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[20294.807317] Enabling non-boot CPUs ...
>[20294.807349] x86: Booting SMP configuration:
>[20294.807350] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[20294.818789] Disabled fast string operations
>[20294.818804] CPU1: Thermal monitoring handled by SMI
>[20294.818832] kvm: enabling virtualization on CPU1
>[20294.821178] Intel pstate controlling: cpu 1
>[20294.821267] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[20294.822690] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[20294.822699] CPU1 is up
>[20294.822715] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[20294.833838] Disabled fast string operations
>[20294.833852] CPU2: Thermal monitoring handled by SMI
>[20294.833877] kvm: enabling virtualization on CPU2
>[20294.836257] Intel pstate controlling: cpu 2
>[20294.836353] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[20294.837351] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[20294.837360] CPU2 is up
>[20294.837377] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[20294.848399] Disabled fast string operations
>[20294.848413] CPU3: Thermal monitoring handled by SMI
>[20294.848435] kvm: enabling virtualization on CPU3
>[20294.850645] Intel pstate controlling: cpu 3
>[20294.850682] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[20294.850686] CPU3 is up
>[20294.854084] ACPI: Waking up from system sleep state S3
>[20294.892515] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[20294.914481] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[20294.947493] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[20294.958611] PM: noirq resume of devices complete after 98.370 msecs
>[20294.958809] PM: early resume of devices complete after 0.152 msecs
>[20294.958930] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[20294.959130] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[20294.959507] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[20294.959519] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[20295.020523] [drm] Wrong MCH_SSKPD value: 0x16040307
>[20295.020524] [drm] This can cause pipe underruns and display issues.
>[20295.020524] [drm] Please upgrade your BIOS to fix this.
>[20295.167412] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[20295.264251] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[20295.266261] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[20295.267871] ata2.00: configured for UDMA/100
>[20295.269766] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[20295.279739] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[20295.280566] ata1.00: configured for UDMA/133
>[20295.280722] sd 0:0:0:0: [sda] Starting disk
>[20295.316418] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[20295.585329] PM: resume of devices complete after 626.839 msecs
>[20295.586575] PM: Finishing wakeup.
>[20295.586749] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[20295.586863] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[20295.586951] r8169 0000:06:00.0: no hotplug settings from platform
>[20295.586578] Restarting tasks ... done.
>[20295.588850] video LNXVIDEO:00: Restoring backlight state
>[20295.588856] video LNXVIDEO:01: Restoring backlight state
>[20295.763757] r8169 0000:06:00.0 p5p1: link down
>[20295.763826] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[20295.764804] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[20295.771517] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[20295.834613] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[20296.594565] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[20296.899387] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[20296.908747] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[20296.911482] wlp3s0: authenticated
>[20296.912462] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[20296.915834] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=4)
>[20296.918172] wlp3s0: associated
>[20296.918198] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[25681.206103] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[25681.212776] cfg80211: Calling CRDA to update world regulatory domain
>[25681.227374] cfg80211: World regulatory domain updated:
>[25681.227380] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[25681.227383] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[25681.227384] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[25681.227386] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[25681.227387] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[25681.227388] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[25681.227390] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[25681.322645] PM: Syncing filesystems ... done.
>[25681.340786] PM: Preparing system for mem sleep
>[25681.341290] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[25681.342846] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[25681.343841] PM: Entering mem sleep
>[25681.343922] Suspending console(s) (use no_console_suspend to debug)
>[25681.344151] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[25681.344182] sd 0:0:0:0: [sda] Stopping disk
>[25681.350164] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[25681.805672] PM: suspend of devices complete after 461.891 msecs
>[25681.805848] PM: late suspend of devices complete after 0.172 msecs
>[25681.806059] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[25681.816645] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[25681.838744] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[25681.849919] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[25681.871595] PM: noirq suspend of devices complete after 65.777 msecs
>[25681.872183] ACPI: Preparing to enter system sleep state S3
>[25681.873541] PM: Saving platform NVS memory
>[25681.875289] Disabling non-boot CPUs ...
>[25681.877127] kvm: disabling virtualization on CPU1
>[25681.877154] smpboot: CPU 1 is now offline
>[25681.879352] kvm: disabling virtualization on CPU2
>[25681.879374] smpboot: CPU 2 is now offline
>[25681.880158] Broke affinity for irq 41
>[25681.880364] Broke affinity for irq 50
>[25681.881383] kvm: disabling virtualization on CPU3
>[25681.881394] smpboot: CPU 3 is now offline
>[25681.883119] ACPI: Low-level resume complete
>[25681.883159] PM: Restoring platform NVS memory
>[25681.883855] CPU0: Thermal monitoring handled by SMI
>[25681.883861] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[25681.883889] Enabling non-boot CPUs ...
>[25681.883922] x86: Booting SMP configuration:
>[25681.883923] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[25681.895378] Disabled fast string operations
>[25681.895392] CPU1: Thermal monitoring handled by SMI
>[25681.895419] kvm: enabling virtualization on CPU1
>[25681.897710] Intel pstate controlling: cpu 1
>[25681.897782] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[25681.898884] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[25681.898893] CPU1 is up
>[25681.898910] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[25681.909932] Disabled fast string operations
>[25681.909946] CPU2: Thermal monitoring handled by SMI
>[25681.909972] kvm: enabling virtualization on CPU2
>[25681.912361] Intel pstate controlling: cpu 2
>[25681.912493] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[25681.912843] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[25681.912847] CPU2 is up
>[25681.912862] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[25681.923885] Disabled fast string operations
>[25681.923898] CPU3: Thermal monitoring handled by SMI
>[25681.923922] kvm: enabling virtualization on CPU3
>[25681.926134] Intel pstate controlling: cpu 3
>[25681.926171] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[25681.926175] CPU3 is up
>[25681.929577] ACPI: Waking up from system sleep state S3
>[25681.968553] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[25681.990501] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[25682.024508] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[25682.035626] PM: noirq resume of devices complete after 99.541 msecs
>[25682.035824] PM: early resume of devices complete after 0.152 msecs
>[25682.035947] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[25682.036204] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[25682.036212] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[25682.036336] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[25682.098563] [drm] Wrong MCH_SSKPD value: 0x16040307
>[25682.098564] [drm] This can cause pipe underruns and display issues.
>[25682.098564] [drm] Please upgrade your BIOS to fix this.
>[25682.243531] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[25682.341279] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[25682.343278] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[25682.347214] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[25682.347294] ata2.00: configured for UDMA/100
>[25682.357149] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[25682.357995] ata1.00: configured for UDMA/133
>[25682.358136] sd 0:0:0:0: [sda] Starting disk
>[25682.401465] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[25682.512708] PM: resume of devices complete after 477.123 msecs
>[25682.513964] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[25682.514051] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[25682.514105] r8169 0000:06:00.0: no hotplug settings from platform
>[25682.514141] PM: Finishing wakeup.
>[25682.514145] Restarting tasks ... done.
>[25682.520811] video LNXVIDEO:00: Restoring backlight state
>[25682.520814] video LNXVIDEO:01: Restoring backlight state
>[25682.693875] r8169 0000:06:00.0 p5p1: link down
>[25682.693913] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[25682.694740] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[25682.701518] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[25682.771071] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[25683.481686] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[25683.849645] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[25683.858614] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[25683.861354] wlp3s0: authenticated
>[25683.862428] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[25683.865735] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=3)
>[25683.868062] wlp3s0: associated
>[25683.868101] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[29259.436824] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[29259.444972] cfg80211: Calling CRDA to update world regulatory domain
>[29259.496410] cfg80211: World regulatory domain updated:
>[29259.496416] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[29259.496419] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[29259.496421] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[29259.496422] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[29259.496424] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[29259.496425] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[29259.496427] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[29259.528140] PM: Syncing filesystems ... done.
>[29259.564199] PM: Preparing system for mem sleep
>[29259.564956] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[29259.566140] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[29259.567117] PM: Entering mem sleep
>[29259.567205] Suspending console(s) (use no_console_suspend to debug)
>[29259.568334] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[29259.568372] sd 0:0:0:0: [sda] Stopping disk
>[29260.031879] PM: suspend of devices complete after 464.815 msecs
>[29260.032055] PM: late suspend of devices complete after 0.173 msecs
>[29260.032195] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[29260.042917] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[29260.065008] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[29260.076191] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[29260.097866] PM: noirq suspend of devices complete after 65.841 msecs
>[29260.098454] ACPI: Preparing to enter system sleep state S3
>[29260.100032] PM: Saving platform NVS memory
>[29260.101580] Disabling non-boot CPUs ...
>[29260.104043] kvm: disabling virtualization on CPU1
>[29260.104057] smpboot: CPU 1 is now offline
>[29260.106344] kvm: disabling virtualization on CPU2
>[29260.106361] smpboot: CPU 2 is now offline
>[29260.107316] Broke affinity for irq 41
>[29260.107478] Broke affinity for irq 50
>[29260.108501] kvm: disabling virtualization on CPU3
>[29260.108512] smpboot: CPU 3 is now offline
>[29260.110214] ACPI: Low-level resume complete
>[29260.110255] PM: Restoring platform NVS memory
>[29260.110953] CPU0: Thermal monitoring handled by SMI
>[29260.110959] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[29260.110993] Enabling non-boot CPUs ...
>[29260.111025] x86: Booting SMP configuration:
>[29260.111026] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[29260.122483] Disabled fast string operations
>[29260.122498] CPU1: Thermal monitoring handled by SMI
>[29260.122523] kvm: enabling virtualization on CPU1
>[29260.124888] Intel pstate controlling: cpu 1
>[29260.124978] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[29260.125619] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[29260.125623] CPU1 is up
>[29260.125638] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[29260.136661] Disabled fast string operations
>[29260.136675] CPU2: Thermal monitoring handled by SMI
>[29260.136701] kvm: enabling virtualization on CPU2
>[29260.139097] Intel pstate controlling: cpu 2
>[29260.139194] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[29260.140192] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[29260.140201] CPU2 is up
>[29260.140219] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[29260.151341] Disabled fast string operations
>[29260.151354] CPU3: Thermal monitoring handled by SMI
>[29260.151376] kvm: enabling virtualization on CPU3
>[29260.153587] Intel pstate controlling: cpu 3
>[29260.153625] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[29260.153628] CPU3 is up
>[29260.157061] ACPI: Waking up from system sleep state S3
>[29260.195812] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[29260.217773] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[29260.251780] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[29260.262898] PM: noirq resume of devices complete after 99.940 msecs
>[29260.263097] PM: early resume of devices complete after 0.152 msecs
>[29260.263362] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[29260.263408] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[29260.263521] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[29260.263595] mei_me 0000:00:16.0: irq 51 for MSI/MSI-X
>[29260.322854] [drm] Wrong MCH_SSKPD value: 0x16040307
>[29260.322855] [drm] This can cause pipe underruns and display issues.
>[29260.322855] [drm] Please upgrade your BIOS to fix this.
>[29260.470731] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[29260.569554] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[29260.569582] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[29260.573561] ata2.00: configured for UDMA/100
>[29260.628709] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[29260.803445] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[29260.813407] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[29260.814226] ata1.00: configured for UDMA/133
>[29260.816212] sd 0:0:0:0: [sda] Starting disk
>[29260.816522] PM: resume of devices complete after 553.703 msecs
>[29260.817751] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[29260.817837] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[29260.817910] r8169 0000:06:00.0: no hotplug settings from platform
>[29260.817930] PM: Finishing wakeup.
>[29260.817933] Restarting tasks ... done.
>[29260.821438] video LNXVIDEO:00: Restoring backlight state
>[29260.821445] video LNXVIDEO:01: Restoring backlight state
>[29260.993096] r8169 0000:06:00.0 p5p1: link down
>[29260.993135] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[29260.994582] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[29261.001396] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[29261.063595] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[29261.418094] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[29262.193778] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[29262.202705] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[29262.205429] wlp3s0: authenticated
>[29262.206645] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[29262.210093] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[29262.212799] wlp3s0: associated
>[29262.212860] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[32372.870264] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[32372.917666] cfg80211: Calling CRDA to update world regulatory domain
>[32372.928988] cfg80211: World regulatory domain updated:
>[32372.928993] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[32372.928995] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[32372.928997] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[32372.928998] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[32372.929000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[32372.929001] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[32372.929002] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[32372.976623] PM: Syncing filesystems ... done.
>[32373.019964] PM: Preparing system for mem sleep
>[32373.022629] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[32373.023788] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[32373.024753] PM: Entering mem sleep
>[32373.024832] Suspending console(s) (use no_console_suspend to debug)
>[32373.025094] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[32373.025125] sd 0:0:0:0: [sda] Stopping disk
>[32373.479565] PM: suspend of devices complete after 454.868 msecs
>[32373.479731] PM: late suspend of devices complete after 0.164 msecs
>[32373.479902] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[32373.490544] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[32373.512652] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[32373.523820] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[32373.545499] PM: noirq suspend of devices complete after 65.797 msecs
>[32373.546086] ACPI: Preparing to enter system sleep state S3
>[32373.547610] PM: Saving platform NVS memory
>[32373.549150] Disabling non-boot CPUs ...
>[32373.551226] kvm: disabling virtualization on CPU1
>[32373.551239] smpboot: CPU 1 is now offline
>[32373.551978] Broke affinity for irq 41
>[32373.553521] kvm: disabling virtualization on CPU2
>[32373.553535] smpboot: CPU 2 is now offline
>[32373.554502] Broke affinity for irq 50
>[32373.555526] kvm: disabling virtualization on CPU3
>[32373.555549] smpboot: CPU 3 is now offline
>[32373.557312] ACPI: Low-level resume complete
>[32373.557353] PM: Restoring platform NVS memory
>[32373.558054] CPU0: Thermal monitoring handled by SMI
>[32373.558060] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[32373.558094] Enabling non-boot CPUs ...
>[32373.558126] x86: Booting SMP configuration:
>[32373.558126] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[32373.569584] Disabled fast string operations
>[32373.569599] CPU1: Thermal monitoring handled by SMI
>[32373.569626] kvm: enabling virtualization on CPU1
>[32373.571933] Intel pstate controlling: cpu 1
>[32373.572008] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[32373.573192] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[32373.573201] CPU1 is up
>[32373.573216] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[32373.584239] Disabled fast string operations
>[32373.584253] CPU2: Thermal monitoring handled by SMI
>[32373.584278] kvm: enabling virtualization on CPU2
>[32373.586665] Intel pstate controlling: cpu 2
>[32373.586761] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[32373.587758] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[32373.587766] CPU2 is up
>[32373.587782] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[32373.598804] Disabled fast string operations
>[32373.598817] CPU3: Thermal monitoring handled by SMI
>[32373.598839] kvm: enabling virtualization on CPU3
>[32373.601055] Intel pstate controlling: cpu 3
>[32373.601091] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[32373.601095] CPU3 is up
>[32373.604516] ACPI: Waking up from system sleep state S3
>[32373.642428] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[32373.664406] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[32373.698415] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[32373.709529] PM: noirq resume of devices complete after 99.425 msecs
>[32373.709723] PM: early resume of devices complete after 0.148 msecs
>[32373.710062] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[32373.710113] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[32373.710122] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[32373.711374] mei_me 0000:00:16.0: irq 51 for MSI/MSI-X
>[32373.771484] [drm] Wrong MCH_SSKPD value: 0x16040307
>[32373.771485] [drm] This can cause pipe underruns and display issues.
>[32373.771485] [drm] Please upgrade your BIOS to fix this.
>[32373.922383] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[32374.014194] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[32374.016013] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[32374.016190] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[32374.020098] ata2.00: configured for UDMA/100
>[32374.025951] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[32374.026796] ata1.00: configured for UDMA/133
>[32374.026950] sd 0:0:0:0: [sda] Starting disk
>[32374.081311] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[32374.191882] PM: resume of devices complete after 482.404 msecs
>[32374.192789] PM: Finishing wakeup.
>[32374.192980] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[32374.193075] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[32374.193120] r8169 0000:06:00.0: no hotplug settings from platform
>[32374.192791] Restarting tasks ... done.
>[32374.200156] video LNXVIDEO:00: Restoring backlight state
>[32374.200161] video LNXVIDEO:01: Restoring backlight state
>[32374.378127] r8169 0000:06:00.0 p5p1: link down
>[32374.378166] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[32374.379365] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[32374.386132] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[32374.478038] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[32375.088581] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[32375.568874] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[32375.576133] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[32375.578857] wlp3s0: authenticated
>[32375.579313] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[32375.582695] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[32375.585091] wlp3s0: associated
>[32375.585122] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[32886.335058] sr0: CDROM not ready.  Make sure there is a disc in the drive.
>[37035.079397] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[37035.094677] cfg80211: Calling CRDA to update world regulatory domain
>[37035.137216] cfg80211: World regulatory domain updated:
>[37035.137222] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[37035.137225] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[37035.137226] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[37035.137228] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[37035.137229] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[37035.137230] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[37035.137232] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[37035.203339] PM: Syncing filesystems ... done.
>[37035.238320] PM: Preparing system for mem sleep
>[37035.243480] Freezing user space processes ... (elapsed 0.003 seconds) done.
>[37035.246966] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[37035.247926] PM: Entering mem sleep
>[37035.248009] Suspending console(s) (use no_console_suspend to debug)
>[37035.248303] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[37035.248338] sd 0:0:0:0: [sda] Stopping disk
>[37035.710722] PM: suspend of devices complete after 462.855 msecs
>[37035.711038] PM: late suspend of devices complete after 0.312 msecs
>[37035.711407] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[37035.721761] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[37035.743824] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[37035.754991] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[37035.776674] PM: noirq suspend of devices complete after 65.664 msecs
>[37035.777262] ACPI: Preparing to enter system sleep state S3
>[37035.779126] PM: Saving platform NVS memory
>[37035.781252] Disabling non-boot CPUs ...
>[37035.783260] kvm: disabling virtualization on CPU1
>[37035.783275] smpboot: CPU 1 is now offline
>[37035.785714] kvm: disabling virtualization on CPU2
>[37035.785727] smpboot: CPU 2 is now offline
>[37035.786241] Broke affinity for irq 41
>[37035.786359] Broke affinity for irq 50
>[37035.787370] kvm: disabling virtualization on CPU3
>[37035.787383] smpboot: CPU 3 is now offline
>[37035.788712] ACPI: Low-level resume complete
>[37035.788753] PM: Restoring platform NVS memory
>[37035.789456] CPU0: Thermal monitoring handled by SMI
>[37035.789462] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[37035.789494] Enabling non-boot CPUs ...
>[37035.789527] x86: Booting SMP configuration:
>[37035.789527] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[37035.800972] Disabled fast string operations
>[37035.800987] CPU1: Thermal monitoring handled by SMI
>[37035.801015] kvm: enabling virtualization on CPU1
>[37035.803396] Intel pstate controlling: cpu 1
>[37035.803482] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[37035.804117] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[37035.804121] CPU1 is up
>[37035.804136] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[37035.815159] Disabled fast string operations
>[37035.815172] CPU2: Thermal monitoring handled by SMI
>[37035.815198] kvm: enabling virtualization on CPU2
>[37035.817600] Intel pstate controlling: cpu 2
>[37035.817698] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[37035.818695] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[37035.818700] CPU2 is up
>[37035.818717] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[37035.829740] Disabled fast string operations
>[37035.829753] CPU3: Thermal monitoring handled by SMI
>[37035.829776] kvm: enabling virtualization on CPU3
>[37035.831989] Intel pstate controlling: cpu 3
>[37035.832026] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[37035.832029] CPU3 is up
>[37035.835448] ACPI: Waking up from system sleep state S3
>[37035.874388] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[37035.896362] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[37035.929370] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[37035.940485] PM: noirq resume of devices complete after 99.235 msecs
>[37035.940682] PM: early resume of devices complete after 0.149 msecs
>[37035.940795] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[37035.941065] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[37035.941125] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[37035.941148] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[37036.002432] [drm] Wrong MCH_SSKPD value: 0x16040307
>[37036.002433] [drm] This can cause pipe underruns and display issues.
>[37036.002433] [drm] Please upgrade your BIOS to fix this.
>[37036.148387] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[37036.246130] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[37036.248147] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[37036.248989] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[37036.252006] ata2.00: configured for UDMA/100
>[37036.258928] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[37036.259771] ata1.00: configured for UDMA/133
>[37036.259932] sd 0:0:0:0: [sda] Starting disk
>[37036.296301] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[37036.566162] PM: resume of devices complete after 625.794 msecs
>[37036.567279] PM: Finishing wakeup.
>[37036.567454] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[37036.567282] Restarting tasks ... done.
>[37036.568543] video LNXVIDEO:00: Restoring backlight state
>[37036.568550] video LNXVIDEO:01: Restoring backlight state
>[37036.572246] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[37036.575447] r8169 0000:06:00.0: no hotplug settings from platform
>[37036.759637] r8169 0000:06:00.0 p5p1: link down
>[37036.759789] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[37036.761681] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[37036.768412] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[37036.830330] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[37037.411502] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[37037.930739] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[37037.939740] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[37037.942542] wlp3s0: authenticated
>[37037.943208] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[37037.946527] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[37037.949039] wlp3s0: associated
>[37037.949070] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[37555.970205] sr0: CDROM not ready.  Make sure there is a disc in the drive.
>[40980.683895] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[40980.696361] cfg80211: Calling CRDA to update world regulatory domain
>[40980.741031] cfg80211: World regulatory domain updated:
>[40980.741037] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[40980.741040] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[40980.741041] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[40980.741043] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[40980.741044] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[40980.741045] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[40980.741047] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[40980.795540] PM: Syncing filesystems ... done.
>[40980.828089] PM: Preparing system for mem sleep
>[40980.828939] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[40980.830270] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[40980.831232] PM: Entering mem sleep
>[40980.831310] Suspending console(s) (use no_console_suspend to debug)
>[40980.831603] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[40980.831637] sd 0:0:0:0: [sda] Stopping disk
>[40981.294071] PM: suspend of devices complete after 462.907 msecs
>[40981.294243] PM: late suspend of devices complete after 0.168 msecs
>[40981.294430] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[40981.305029] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[40981.327129] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[40981.338301] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[40981.359979] PM: noirq suspend of devices complete after 65.767 msecs
>[40981.360567] ACPI: Preparing to enter system sleep state S3
>[40981.362365] PM: Saving platform NVS memory
>[40981.364485] Disabling non-boot CPUs ...
>[40981.366821] kvm: disabling virtualization on CPU1
>[40981.366838] smpboot: CPU 1 is now offline
>[40981.368806] kvm: disabling virtualization on CPU2
>[40981.368816] smpboot: CPU 2 is now offline
>[40981.369799] Broke affinity for irq 41
>[40981.369916] Broke affinity for irq 50
>[40981.370927] kvm: disabling virtualization on CPU3
>[40981.370936] smpboot: CPU 3 is now offline
>[40981.372620] ACPI: Low-level resume complete
>[40981.372660] PM: Restoring platform NVS memory
>[40981.373357] CPU0: Thermal monitoring handled by SMI
>[40981.373364] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[40981.373399] Enabling non-boot CPUs ...
>[40981.373431] x86: Booting SMP configuration:
>[40981.373431] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[40981.384889] Disabled fast string operations
>[40981.384904] CPU1: Thermal monitoring handled by SMI
>[40981.384929] kvm: enabling virtualization on CPU1
>[40981.387263] Intel pstate controlling: cpu 1
>[40981.387350] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[40981.388744] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[40981.388753] CPU1 is up
>[40981.388769] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[40981.399792] Disabled fast string operations
>[40981.399806] CPU2: Thermal monitoring handled by SMI
>[40981.399831] kvm: enabling virtualization on CPU2
>[40981.402242] Intel pstate controlling: cpu 2
>[40981.402335] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[40981.403331] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[40981.403340] CPU2 is up
>[40981.403358] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[40981.414379] Disabled fast string operations
>[40981.414393] CPU3: Thermal monitoring handled by SMI
>[40981.414415] kvm: enabling virtualization on CPU3
>[40981.416631] Intel pstate controlling: cpu 3
>[40981.416668] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[40981.416672] CPU3 is up
>[40981.420107] ACPI: Waking up from system sleep state S3
>[40981.458992] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[40981.480966] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[40981.513977] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[40981.525095] PM: noirq resume of devices complete after 99.265 msecs
>[40981.525294] PM: early resume of devices complete after 0.153 msecs
>[40981.525423] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[40981.525610] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[40981.525851] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[40981.525902] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[40981.585044] [drm] Wrong MCH_SSKPD value: 0x16040307
>[40981.585045] [drm] This can cause pipe underruns and display issues.
>[40981.585046] [drm] Please upgrade your BIOS to fix this.
>[40981.734013] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[40981.832768] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[40981.832799] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[40981.835983] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[40981.836469] ata2.00: configured for UDMA/100
>[40981.845920] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[40981.846768] ata1.00: configured for UDMA/133
>[40981.846908] sd 0:0:0:0: [sda] Starting disk
>[40981.891957] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[40982.003279] PM: resume of devices complete after 478.210 msecs
>[40982.004737] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[40982.004821] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[40982.004871] r8169 0000:06:00.0: no hotplug settings from platform
>[40982.004889] PM: Finishing wakeup.
>[40982.004891] Restarting tasks ... done.
>[40982.016625] video LNXVIDEO:00: Restoring backlight state
>[40982.016632] video LNXVIDEO:01: Restoring backlight state
>[40982.200327] r8169 0000:06:00.0 p5p1: link down
>[40982.200552] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[40982.202304] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[40982.209006] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[40982.278328] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[40982.737317] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[40983.304941] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[40983.313879] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[40983.316654] wlp3s0: authenticated
>[40983.316945] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[40983.320266] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=4)
>[40983.323865] wlp3s0: associated
>[40983.323914] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[47749.978533] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[47749.986916] cfg80211: Calling CRDA to update world regulatory domain
>[47750.029070] cfg80211: World regulatory domain updated:
>[47750.029076] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[47750.029078] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[47750.029080] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[47750.029081] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[47750.029083] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[47750.029084] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[47750.029085] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[47750.075791] PM: Syncing filesystems ... done.
>[47750.110319] PM: Preparing system for mem sleep
>[47750.111275] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[47750.112704] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[47750.113792] PM: Entering mem sleep
>[47750.113852] Suspending console(s) (use no_console_suspend to debug)
>[47750.114501] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[47750.114533] sd 0:0:0:0: [sda] Stopping disk
>[47750.577686] PM: suspend of devices complete after 463.979 msecs
>[47750.577912] PM: late suspend of devices complete after 0.223 msecs
>[47750.578191] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[47750.588732] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[47750.610784] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[47750.621950] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[47750.643625] PM: noirq suspend of devices complete after 65.741 msecs
>[47750.644213] ACPI: Preparing to enter system sleep state S3
>[47750.646010] PM: Saving platform NVS memory
>[47750.647646] Disabling non-boot CPUs ...
>[47750.648695] Broke affinity for irq 41
>[47750.650240] kvm: disabling virtualization on CPU1
>[47750.650263] smpboot: CPU 1 is now offline
>[47750.652601] kvm: disabling virtualization on CPU2
>[47750.652615] smpboot: CPU 2 is now offline
>[47750.653591] Broke affinity for irq 50
>[47750.654612] kvm: disabling virtualization on CPU3
>[47750.654637] smpboot: CPU 3 is now offline
>[47750.656558] ACPI: Low-level resume complete
>[47750.656599] PM: Restoring platform NVS memory
>[47750.657298] CPU0: Thermal monitoring handled by SMI
>[47750.657304] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[47750.657334] Enabling non-boot CPUs ...
>[47750.657375] x86: Booting SMP configuration:
>[47750.657376] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[47750.668820] Disabled fast string operations
>[47750.668835] CPU1: Thermal monitoring handled by SMI
>[47750.668862] kvm: enabling virtualization on CPU1
>[47750.671224] Intel pstate controlling: cpu 1
>[47750.671326] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[47750.672895] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[47750.672904] CPU1 is up
>[47750.672921] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[47750.683944] Disabled fast string operations
>[47750.683958] CPU2: Thermal monitoring handled by SMI
>[47750.683983] kvm: enabling virtualization on CPU2
>[47750.686406] Intel pstate controlling: cpu 2
>[47750.686502] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[47750.687499] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[47750.687504] CPU2 is up
>[47750.687529] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[47750.698650] Disabled fast string operations
>[47750.698664] CPU3: Thermal monitoring handled by SMI
>[47750.698687] kvm: enabling virtualization on CPU3
>[47750.700898] Intel pstate controlling: cpu 3
>[47750.700934] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[47750.700938] CPU3 is up
>[47750.704363] ACPI: Waking up from system sleep state S3
>[47750.742429] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[47750.764403] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[47750.797416] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[47750.808534] PM: noirq resume of devices complete after 98.374 msecs
>[47750.808733] PM: early resume of devices complete after 0.154 msecs
>[47750.808856] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[47750.809074] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[47750.809104] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[47750.809188] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[47750.870451] [drm] Wrong MCH_SSKPD value: 0x16040307
>[47750.870452] [drm] This can cause pipe underruns and display issues.
>[47750.870452] [drm] Please upgrade your BIOS to fix this.
>[47751.015381] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[47751.114178] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[47751.116193] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[47751.118866] ata2.00: configured for UDMA/100
>[47751.121914] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[47751.131877] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[47751.132703] ata1.00: configured for UDMA/133
>[47751.134342] sd 0:0:0:0: [sda] Starting disk
>[47751.153247] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[47751.433249] PM: resume of devices complete after 624.829 msecs
>[47751.434497] PM: Finishing wakeup.
>[47751.434711] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[47751.434841] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[47751.434917] r8169 0000:06:00.0: no hotplug settings from platform
>[47751.434499] Restarting tasks ... done.
>[47751.446529] video LNXVIDEO:00: Restoring backlight state
>[47751.446536] video LNXVIDEO:01: Restoring backlight state
>[47751.616686] r8169 0000:06:00.0 p5p1: link down
>[47751.616753] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[47751.619831] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[47751.626573] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[47751.682913] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[47752.514472] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[47752.727541] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[47752.735343] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[47752.738083] wlp3s0: authenticated
>[47752.738294] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[47752.742992] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[47752.745753] wlp3s0: associated
>[47752.745810] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[50253.350685] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[50253.363012] cfg80211: Calling CRDA to update world regulatory domain
>[50253.409980] cfg80211: World regulatory domain updated:
>[50253.409987] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[50253.409989] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[50253.409991] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[50253.409992] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[50253.409994] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[50253.409995] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[50253.409996] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[50253.455336] PM: Syncing filesystems ... done.
>[50253.493255] PM: Preparing system for mem sleep
>[50253.494922] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[50253.496492] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[50253.497652] PM: Entering mem sleep
>[50253.497730] Suspending console(s) (use no_console_suspend to debug)
>[50253.498011] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[50253.498041] sd 0:0:0:0: [sda] Stopping disk
>[50253.965526] PM: suspend of devices complete after 467.937 msecs
>[50253.965810] PM: late suspend of devices complete after 0.280 msecs
>[50253.966147] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[50253.976531] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[50253.998597] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[50254.009764] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[50254.031432] PM: noirq suspend of devices complete after 65.651 msecs
>[50254.032020] ACPI: Preparing to enter system sleep state S3
>[50254.033497] PM: Saving platform NVS memory
>[50254.035569] Disabling non-boot CPUs ...
>[50254.036156] Broke affinity for irq 41
>[50254.037605] kvm: disabling virtualization on CPU1
>[50254.037981] smpboot: CPU 1 is now offline
>[50254.040408] kvm: disabling virtualization on CPU2
>[50254.040803] smpboot: CPU 2 is now offline
>[50254.041684] Broke affinity for irq 50
>[50254.042703] kvm: disabling virtualization on CPU3
>[50254.042710] smpboot: CPU 3 is now offline
>[50254.044308] ACPI: Low-level resume complete
>[50254.044348] PM: Restoring platform NVS memory
>[50254.045048] CPU0: Thermal monitoring handled by SMI
>[50254.045054] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[50254.045090] Enabling non-boot CPUs ...
>[50254.045123] x86: Booting SMP configuration:
>[50254.045124] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[50254.056570] Disabled fast string operations
>[50254.056584] CPU1: Thermal monitoring handled by SMI
>[50254.056610] kvm: enabling virtualization on CPU1
>[50254.058965] Intel pstate controlling: cpu 1
>[50254.059057] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[50254.060563] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[50254.060572] CPU1 is up
>[50254.060588] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[50254.071611] Disabled fast string operations
>[50254.071625] CPU2: Thermal monitoring handled by SMI
>[50254.071650] kvm: enabling virtualization on CPU2
>[50254.074035] Intel pstate controlling: cpu 2
>[50254.074130] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[50254.075128] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[50254.075137] CPU2 is up
>[50254.075154] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[50254.086176] Disabled fast string operations
>[50254.086189] CPU3: Thermal monitoring handled by SMI
>[50254.086212] kvm: enabling virtualization on CPU3
>[50254.088424] Intel pstate controlling: cpu 3
>[50254.088461] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[50254.088464] CPU3 is up
>[50254.091894] ACPI: Waking up from system sleep state S3
>[50254.130349] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[50254.152305] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[50254.185312] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[50254.196429] PM: noirq resume of devices complete after 99.108 msecs
>[50254.196627] PM: early resume of devices complete after 0.152 msecs
>[50254.196746] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[50254.196919] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[50254.197287] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[50254.202117] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[50254.258352] [drm] Wrong MCH_SSKPD value: 0x16040307
>[50254.258353] [drm] This can cause pipe underruns and display issues.
>[50254.258353] [drm] Please upgrade your BIOS to fix this.
>[50254.409342] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[50254.502069] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[50254.506080] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[50254.509428] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[50254.509985] ata2.00: configured for UDMA/100
>[50254.519421] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[50254.520215] ata1.00: configured for UDMA/133
>[50254.520354] sd 0:0:0:0: [sda] Starting disk
>[50254.567273] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[50254.678660] PM: resume of devices complete after 482.273 msecs
>[50254.679683] PM: Finishing wakeup.
>[50254.679961] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[50254.680062] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[50254.680169] r8169 0000:06:00.0: no hotplug settings from platform
>[50254.679685] Restarting tasks ... done.
>[50254.684252] video LNXVIDEO:00: Restoring backlight state
>[50254.684260] video LNXVIDEO:01: Restoring backlight state
>[50254.723961] systemd[1]: Requested transaction contradicts existing jobs: File exists
>[50254.733920] systemd[1]: Service sleep.target is not needed anymore. Stopping.
>[50254.884842] r8169 0000:06:00.0 p5p1: link down
>[50254.884931] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[50254.886495] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[50254.893248] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[50254.957377] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[50255.965330] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[50256.059111] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[50256.068213] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[50256.070991] wlp3s0: authenticated
>[50256.071207] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[50256.075402] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[50256.077725] wlp3s0: associated
>[50256.077752] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[52348.797077] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[52348.806516] cfg80211: Calling CRDA to update world regulatory domain
>[52348.860399] cfg80211: World regulatory domain updated:
>[52348.860405] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[52348.860407] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[52348.860409] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[52348.860410] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[52348.860411] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[52348.860413] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[52348.860414] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[52348.899348] PM: Syncing filesystems ... done.
>[52348.927266] PM: Preparing system for mem sleep
>[52348.927981] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[52348.929556] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[52348.930672] PM: Entering mem sleep
>[52348.930755] Suspending console(s) (use no_console_suspend to debug)
>[52348.930966] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[52348.930996] sd 0:0:0:0: [sda] Stopping disk
>[52349.400453] PM: suspend of devices complete after 469.844 msecs
>[52349.400756] PM: late suspend of devices complete after 0.286 msecs
>[52349.401090] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[52349.411491] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[52349.433567] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[52349.444739] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[52349.466415] PM: noirq suspend of devices complete after 65.689 msecs
>[52349.467003] ACPI: Preparing to enter system sleep state S3
>[52349.468584] PM: Saving platform NVS memory
>[52349.470242] Disabling non-boot CPUs ...
>[52349.471424] Broke affinity for irq 41
>[52349.472829] kvm: disabling virtualization on CPU1
>[52349.472848] smpboot: CPU 1 is now offline
>[52349.474937] kvm: disabling virtualization on CPU2
>[52349.474947] smpboot: CPU 2 is now offline
>[52349.475769] Broke affinity for irq 50
>[52349.476785] kvm: disabling virtualization on CPU3
>[52349.476792] smpboot: CPU 3 is now offline
>[52349.478314] ACPI: Low-level resume complete
>[52349.478355] PM: Restoring platform NVS memory
>[52349.479055] CPU0: Thermal monitoring handled by SMI
>[52349.479061] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[52349.479102] Enabling non-boot CPUs ...
>[52349.479135] x86: Booting SMP configuration:
>[52349.479135] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[52349.490585] Disabled fast string operations
>[52349.490600] CPU1: Thermal monitoring handled by SMI
>[52349.490627] kvm: enabling virtualization on CPU1
>[52349.492949] Intel pstate controlling: cpu 1
>[52349.493032] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[52349.494303] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[52349.494312] CPU1 is up
>[52349.494329] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[52349.505362] Disabled fast string operations
>[52349.505376] CPU2: Thermal monitoring handled by SMI
>[52349.505401] kvm: enabling virtualization on CPU2
>[52349.507786] Intel pstate controlling: cpu 2
>[52349.507883] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[52349.508880] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[52349.508890] CPU2 is up
>[52349.508907] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[52349.520030] Disabled fast string operations
>[52349.520043] CPU3: Thermal monitoring handled by SMI
>[52349.520067] kvm: enabling virtualization on CPU3
>[52349.522283] Intel pstate controlling: cpu 3
>[52349.522320] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[52349.522324] CPU3 is up
>[52349.525730] ACPI: Waking up from system sleep state S3
>[52349.564242] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[52349.586208] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[52349.620217] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[52349.631332] PM: noirq resume of devices complete after 99.566 msecs
>[52349.631531] PM: early resume of devices complete after 0.153 msecs
>[52349.631639] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[52349.631930] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[52349.632113] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[52349.637126] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[52349.693285] [drm] Wrong MCH_SSKPD value: 0x16040307
>[52349.693286] [drm] This can cause pipe underruns and display issues.
>[52349.693286] [drm] Please upgrade your BIOS to fix this.
>[52349.839131] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[52349.938003] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[52349.938033] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[52349.941926] ata2.00: configured for UDMA/100
>[52349.947348] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[52349.957306] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[52349.958144] ata1.00: configured for UDMA/133
>[52349.960088] sd 0:0:0:0: [sda] Starting disk
>[52349.987148] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[52350.267065] PM: resume of devices complete after 635.853 msecs
>[52350.268252] PM: Finishing wakeup.
>[52350.268439] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[52350.268588] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[52350.268658] r8169 0000:06:00.0: no hotplug settings from platform
>[52350.268256] Restarting tasks ... done.
>[52350.273918] video LNXVIDEO:00: Restoring backlight state
>[52350.273927] video LNXVIDEO:01: Restoring backlight state
>[52350.452477] r8169 0000:06:00.0 p5p1: link down
>[52350.452844] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[52350.453854] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[52350.461421] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[52350.517939] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[52350.842541] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[52351.624450] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[52351.633407] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[52351.636155] wlp3s0: authenticated
>[52351.637133] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[52351.640896] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[52351.643304] wlp3s0: associated
>[52351.643330] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[54882.881955] sr0: CDROM not ready.  Make sure there is a disc in the drive.
>[56837.990331] systemd-udevd[13109]: starting version 208
>[59759.173587] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[59759.184755] cfg80211: Calling CRDA to update world regulatory domain
>[59759.245311] cfg80211: World regulatory domain updated:
>[59759.245318] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[59759.245320] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[59759.245322] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[59759.245323] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[59759.245325] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[59759.245326] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[59759.245328] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[59759.285249] PM: Syncing filesystems ... done.
>[59759.308969] PM: Preparing system for mem sleep
>[59759.309507] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[59759.310817] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[59759.311783] PM: Entering mem sleep
>[59759.311864] Suspending console(s) (use no_console_suspend to debug)
>[59759.312072] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[59759.312102] sd 0:0:0:0: [sda] Stopping disk
>[59759.774698] PM: suspend of devices complete after 462.981 msecs
>[59759.774952] PM: late suspend of devices complete after 0.251 msecs
>[59759.775245] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[59759.785584] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[59759.807685] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[59759.818849] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[59759.840526] PM: noirq suspend of devices complete after 65.604 msecs
>[59759.841114] ACPI: Preparing to enter system sleep state S3
>[59759.842921] PM: Saving platform NVS memory
>[59759.843840] Disabling non-boot CPUs ...
>[59759.846185] kvm: disabling virtualization on CPU1
>[59759.846202] smpboot: CPU 1 is now offline
>[59759.846791] Broke affinity for irq 41
>[59759.848148] kvm: disabling virtualization on CPU2
>[59759.848162] smpboot: CPU 2 is now offline
>[59759.849037] Broke affinity for irq 50
>[59759.850051] kvm: disabling virtualization on CPU3
>[59759.850059] smpboot: CPU 3 is now offline
>[59759.851545] ACPI: Low-level resume complete
>[59759.851586] PM: Restoring platform NVS memory
>[59759.852284] CPU0: Thermal monitoring handled by SMI
>[59759.852290] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[59759.852323] Enabling non-boot CPUs ...
>[59759.852356] x86: Booting SMP configuration:
>[59759.852357] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[59759.863799] Disabled fast string operations
>[59759.863813] CPU1: Thermal monitoring handled by SMI
>[59759.863839] kvm: enabling virtualization on CPU1
>[59759.866221] Intel pstate controlling: cpu 1
>[59759.866313] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[59759.866947] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[59759.866951] CPU1 is up
>[59759.866966] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[59759.877989] Disabled fast string operations
>[59759.878003] CPU2: Thermal monitoring handled by SMI
>[59759.878029] kvm: enabling virtualization on CPU2
>[59759.880419] Intel pstate controlling: cpu 2
>[59759.880514] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[59759.881510] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[59759.881515] CPU2 is up
>[59759.881531] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[59759.892553] Disabled fast string operations
>[59759.892565] CPU3: Thermal monitoring handled by SMI
>[59759.892587] kvm: enabling virtualization on CPU3
>[59759.894801] Intel pstate controlling: cpu 3
>[59759.894838] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[59759.894841] CPU3 is up
>[59759.898242] ACPI: Waking up from system sleep state S3
>[59759.937276] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[59759.959193] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[59759.992201] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[59760.003310] PM: noirq resume of devices complete after 98.822 msecs
>[59760.003500] PM: early resume of devices complete after 0.146 msecs
>[59760.003587] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[59760.003868] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[59760.003890] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[59760.011191] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[59760.067252] [drm] Wrong MCH_SSKPD value: 0x16040307
>[59760.067252] [drm] This can cause pipe underruns and display issues.
>[59760.067252] [drm] Please upgrade your BIOS to fix this.
>[59760.211074] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[59760.309972] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[59760.313970] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[59760.315303] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[59760.319220] ata2.00: configured for UDMA/100
>[59760.325243] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[59760.326089] ata1.00: configured for UDMA/133
>[59760.326240] sd 0:0:0:0: [sda] Starting disk
>[59760.369014] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[59760.480387] PM: resume of devices complete after 477.129 msecs
>[59760.481432] PM: Finishing wakeup.
>[59760.481598] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[59760.481720] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[59760.481802] r8169 0000:06:00.0: no hotplug settings from platform
>[59760.481435] Restarting tasks ... done.
>[59760.483562] video LNXVIDEO:00: Restoring backlight state
>[59760.483568] video LNXVIDEO:01: Restoring backlight state
>[59760.677499] r8169 0000:06:00.0 p5p1: link down
>[59760.677793] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[59760.682041] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[59760.689603] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[59760.760711] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[59761.825880] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[59761.834880] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[59761.837664] wlp3s0: authenticated
>[59761.838188] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[59761.841515] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[59761.843856] wlp3s0: associated
>[59761.843899] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[59761.923147] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[59822.024315] sr0: CDROM not ready.  Make sure there is a disc in the drive.
>[64708.378920] cfg80211: Calling CRDA to update world regulatory domain
>[64708.386947] cfg80211: World regulatory domain updated:
>[64708.386950] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[64708.386952] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[64708.386953] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[64708.386954] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[64708.386955] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[64708.386956] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[64708.386957] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[64708.957019] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[64708.968113] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[64708.970827] wlp3s0: authenticated
>[64708.971672] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[64708.975372] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[64708.977784] wlp3s0: associated
>[66855.517046] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[66855.525186] cfg80211: Calling CRDA to update world regulatory domain
>[66855.560723] cfg80211: World regulatory domain updated:
>[66855.560730] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[66855.560732] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[66855.560734] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[66855.560735] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[66855.560737] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[66855.560738] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[66855.560739] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[66855.606136] PM: Syncing filesystems ... done.
>[66855.642510] PM: Preparing system for mem sleep
>[66855.643246] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[66855.644893] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[66855.645998] PM: Entering mem sleep
>[66855.646050] Suspending console(s) (use no_console_suspend to debug)
>[66855.646287] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[66855.646323] sd 0:0:0:0: [sda] Stopping disk
>[66856.106883] PM: suspend of devices complete after 460.962 msecs
>[66856.107128] PM: late suspend of devices complete after 0.240 msecs
>[66856.107387] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[66856.117874] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[66856.139968] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[66856.151144] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[66856.172818] PM: noirq suspend of devices complete after 65.720 msecs
>[66856.173406] ACPI: Preparing to enter system sleep state S3
>[66856.174957] PM: Saving platform NVS memory
>[66856.176478] Disabling non-boot CPUs ...
>[66856.176957] Broke affinity for irq 41
>[66856.177384] Broke affinity for irq 50
>[66856.178408] kvm: disabling virtualization on CPU1
>[66856.178418] smpboot: CPU 1 is now offline
>[66856.180723] kvm: disabling virtualization on CPU2
>[66856.181095] smpboot: CPU 2 is now offline
>[66856.183115] kvm: disabling virtualization on CPU3
>[66856.183123] smpboot: CPU 3 is now offline
>[66856.184683] ACPI: Low-level resume complete
>[66856.184723] PM: Restoring platform NVS memory
>[66856.185419] CPU0: Thermal monitoring handled by SMI
>[66856.185425] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[66856.185460] Enabling non-boot CPUs ...
>[66856.185493] x86: Booting SMP configuration:
>[66856.185493] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[66856.196933] Disabled fast string operations
>[66856.196948] CPU1: Thermal monitoring handled by SMI
>[66856.196975] kvm: enabling virtualization on CPU1
>[66856.199296] Intel pstate controlling: cpu 1
>[66856.199379] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[66856.200677] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[66856.200686] CPU1 is up
>[66856.200702] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[66856.211824] Disabled fast string operations
>[66856.211838] CPU2: Thermal monitoring handled by SMI
>[66856.211863] kvm: enabling virtualization on CPU2
>[66856.214052] Intel pstate controlling: cpu 2
>[66856.214090] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[66856.214440] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[66856.214443] CPU2 is up
>[66856.214456] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[66856.225578] Disabled fast string operations
>[66856.225591] CPU3: Thermal monitoring handled by SMI
>[66856.225613] kvm: enabling virtualization on CPU3
>[66856.227825] Intel pstate controlling: cpu 3
>[66856.227863] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[66856.227866] CPU3 is up
>[66856.231220] ACPI: Waking up from system sleep state S3
>[66856.270635] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[66856.292603] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[66856.325613] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[66856.336732] PM: noirq resume of devices complete after 98.966 msecs
>[66856.336931] PM: early resume of devices complete after 0.153 msecs
>[66856.337036] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[66856.337418] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[66856.337632] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[66856.337641] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[66856.399669] [drm] Wrong MCH_SSKPD value: 0x16040307
>[66856.399670] [drm] This can cause pipe underruns and display issues.
>[66856.399670] [drm] Please upgrade your BIOS to fix this.
>[66856.544586] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[66856.642387] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[66856.643694] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[66856.644384] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[66856.648840] ata2.00: configured for UDMA/100
>[66856.653632] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[66856.654480] ata1.00: configured for UDMA/133
>[66856.654624] sd 0:0:0:0: [sda] Starting disk
>[66856.702520] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[66856.813767] PM: resume of devices complete after 477.073 msecs
>[66856.814773] PM: Finishing wakeup.
>[66856.814972] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[66856.815055] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[66856.815096] r8169 0000:06:00.0: no hotplug settings from platform
>[66856.814775] Restarting tasks ... done.
>[66856.820089] video LNXVIDEO:00: Restoring backlight state
>[66856.820094] video LNXVIDEO:01: Restoring backlight state
>[66856.982971] r8169 0000:06:00.0 p5p1: link down
>[66856.983156] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[66856.984056] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[66856.990810] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[66857.047133] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[66858.115848] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[66858.124991] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[66858.127766] wlp3s0: authenticated
>[66858.128597] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[66858.131919] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[66858.135339] wlp3s0: associated
>[66858.135377] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[66858.194528] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[68358.304364] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[68358.314750] cfg80211: Calling CRDA to update world regulatory domain
>[68358.358373] cfg80211: World regulatory domain updated:
>[68358.358384] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[68358.358387] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[68358.358388] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[68358.358389] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[68358.358391] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[68358.358392] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[68358.358394] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[68358.397432] PM: Syncing filesystems ... done.
>[68358.421682] PM: Preparing system for mem sleep
>[68358.422420] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[68358.424013] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[68358.425274] PM: Entering mem sleep
>[68358.425332] Suspending console(s) (use no_console_suspend to debug)
>[68358.426193] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[68358.426226] sd 0:0:0:0: [sda] Stopping disk
>[68358.894134] PM: suspend of devices complete after 468.935 msecs
>[68358.894361] PM: late suspend of devices complete after 0.223 msecs
>[68358.894639] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[68358.905083] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[68358.927189] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[68358.938364] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[68358.960040] PM: noirq suspend of devices complete after 65.706 msecs
>[68358.960522] ACPI: Preparing to enter system sleep state S3
>[68358.962158] PM: Saving platform NVS memory
>[68358.963701] Disabling non-boot CPUs ...
>[68358.964921] Broke affinity for irq 41
>[68358.966463] kvm: disabling virtualization on CPU1
>[68358.966492] smpboot: CPU 1 is now offline
>[68358.968228] Broke affinity for irq 50
>[68358.969257] kvm: disabling virtualization on CPU2
>[68358.969277] smpboot: CPU 2 is now offline
>[68358.971136] kvm: disabling virtualization on CPU3
>[68358.971144] smpboot: CPU 3 is now offline
>[68358.972784] ACPI: Low-level resume complete
>[68358.972823] PM: Restoring platform NVS memory
>[68358.973524] CPU0: Thermal monitoring handled by SMI
>[68358.973530] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[68358.973578] Enabling non-boot CPUs ...
>[68358.973611] x86: Booting SMP configuration:
>[68358.973612] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[68358.985070] Disabled fast string operations
>[68358.985084] CPU1: Thermal monitoring handled by SMI
>[68358.985111] kvm: enabling virtualization on CPU1
>[68358.987436] Intel pstate controlling: cpu 1
>[68358.987522] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[68358.988939] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[68358.988949] CPU1 is up
>[68358.988965] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[68358.999987] Disabled fast string operations
>[68359.000001] CPU2: Thermal monitoring handled by SMI
>[68359.000027] kvm: enabling virtualization on CPU2
>[68359.002220] Intel pstate controlling: cpu 2
>[68359.002259] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[68359.002609] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[68359.002613] CPU2 is up
>[68359.002626] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[68359.013647] Disabled fast string operations
>[68359.013660] CPU3: Thermal monitoring handled by SMI
>[68359.013683] kvm: enabling virtualization on CPU3
>[68359.015915] Intel pstate controlling: cpu 3
>[68359.015951] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[68359.015954] CPU3 is up
>[68359.019320] ACPI: Waking up from system sleep state S3
>[68359.057997] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[68359.079944] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[68359.112955] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[68359.124074] PM: noirq resume of devices complete after 98.757 msecs
>[68359.124269] PM: early resume of devices complete after 0.149 msecs
>[68359.124357] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[68359.124729] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[68359.125714] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[68359.125729] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[68359.185985] [drm] Wrong MCH_SSKPD value: 0x16040307
>[68359.185986] [drm] This can cause pipe underruns and display issues.
>[68359.185986] [drm] Please upgrade your BIOS to fix this.
>[68359.333936] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[68359.429724] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[68359.431754] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[68359.432319] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[68359.435546] ata2.00: configured for UDMA/100
>[68359.442284] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[68359.443115] ata1.00: configured for UDMA/133
>[68359.445917] sd 0:0:0:0: [sda] Starting disk
>[68359.482841] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[68359.751810] PM: resume of devices complete after 627.856 msecs
>[68359.753324] PM: Finishing wakeup.
>[68359.759053] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[68359.759098] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[68359.759158] r8169 0000:06:00.0: no hotplug settings from platform
>[68359.753327] Restarting tasks ... done.
>[68359.763262] video LNXVIDEO:00: Restoring backlight state
>[68359.763267] video LNXVIDEO:01: Restoring backlight state
>[68359.941220] r8169 0000:06:00.0 p5p1: link down
>[68359.941315] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[68359.942388] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[68359.949140] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[68360.007382] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[68360.958935] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[68361.091185] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[68361.100216] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[68361.102973] wlp3s0: authenticated
>[68361.103840] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[68361.110509] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[68361.113731] wlp3s0: associated
>[68361.113766] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[68817.213826] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[68817.221962] cfg80211: Calling CRDA to update world regulatory domain
>[68817.265283] cfg80211: World regulatory domain updated:
>[68817.265288] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[68817.265290] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[68817.265292] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[68817.265293] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[68817.265294] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[68817.265295] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[68817.265297] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[68817.300432] PM: Syncing filesystems ... done.
>[68817.332796] PM: Preparing system for mem sleep
>[68817.333451] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[68817.334735] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[68817.335730] PM: Entering mem sleep
>[68817.335789] Suspending console(s) (use no_console_suspend to debug)
>[68817.336078] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[68817.336111] sd 0:0:0:0: [sda] Stopping disk
>[68817.799513] PM: suspend of devices complete after 463.827 msecs
>[68817.799742] PM: late suspend of devices complete after 0.225 msecs
>[68817.800019] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[68817.810568] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[68817.832626] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[68817.843794] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[68817.865481] PM: noirq suspend of devices complete after 65.762 msecs
>[68817.866069] ACPI: Preparing to enter system sleep state S3
>[68817.867932] PM: Saving platform NVS memory
>[68817.870003] Disabling non-boot CPUs ...
>[68817.871610] Broke affinity for irq 50
>[68817.872638] kvm: disabling virtualization on CPU1
>[68817.872664] smpboot: CPU 1 is now offline
>[68817.873503] Broke affinity for irq 41
>[68817.874777] kvm: disabling virtualization on CPU2
>[68817.874784] smpboot: CPU 2 is now offline
>[68817.876805] kvm: disabling virtualization on CPU3
>[68817.876810] smpboot: CPU 3 is now offline
>[68817.878011] ACPI: Low-level resume complete
>[68817.878050] PM: Restoring platform NVS memory
>[68817.878751] CPU0: Thermal monitoring handled by SMI
>[68817.878757] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[68817.878807] Enabling non-boot CPUs ...
>[68817.878839] x86: Booting SMP configuration:
>[68817.878840] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[68817.890295] Disabled fast string operations
>[68817.890309] CPU1: Thermal monitoring handled by SMI
>[68817.890336] kvm: enabling virtualization on CPU1
>[68817.892691] Intel pstate controlling: cpu 1
>[68817.892789] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[68817.894344] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[68817.894355] CPU1 is up
>[68817.894383] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[68817.905405] Disabled fast string operations
>[68817.905419] CPU2: Thermal monitoring handled by SMI
>[68817.905445] kvm: enabling virtualization on CPU2
>[68817.907677] Intel pstate controlling: cpu 2
>[68817.907727] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[68817.908078] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[68817.908081] CPU2 is up
>[68817.908095] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[68817.919217] Disabled fast string operations
>[68817.919230] CPU3: Thermal monitoring handled by SMI
>[68817.919253] kvm: enabling virtualization on CPU3
>[68817.921460] Intel pstate controlling: cpu 3
>[68817.921496] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[68817.921500] CPU3 is up
>[68817.924871] ACPI: Waking up from system sleep state S3
>[68817.964162] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[68817.986132] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[68818.020148] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[68818.031277] PM: noirq resume of devices complete after 99.779 msecs
>[68818.031491] PM: early resume of devices complete after 0.165 msecs
>[68818.031605] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[68818.031795] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[68818.031995] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[68818.032014] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[68818.094210] [drm] Wrong MCH_SSKPD value: 0x16040307
>[68818.094211] [drm] This can cause pipe underruns and display issues.
>[68818.094211] [drm] Please upgrade your BIOS to fix this.
>[68818.240151] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[68818.336935] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[68818.338948] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[68818.341105] ata2.00: configured for UDMA/100
>[68818.341515] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[68818.351467] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[68818.352310] ata1.00: configured for UDMA/133
>[68818.354071] sd 0:0:0:0: [sda] Starting disk
>[68818.389024] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[68818.657995] PM: resume of devices complete after 626.768 msecs
>[68818.659240] PM: Finishing wakeup.
>[68818.659499] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[68818.659614] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[68818.659682] r8169 0000:06:00.0: no hotplug settings from platform
>[68818.659243] Restarting tasks ... done.
>[68818.671801] video LNXVIDEO:00: Restoring backlight state
>[68818.671808] video LNXVIDEO:01: Restoring backlight state
>[68818.844496] r8169 0000:06:00.0 p5p1: link down
>[68818.845007] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[68818.846501] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[68818.855111] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[68818.913173] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[68819.519368] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[68820.088783] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[68820.097726] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[68820.100494] wlp3s0: authenticated
>[68820.101106] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[68820.104446] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=3)
>[68820.106791] wlp3s0: associated
>[68820.106817] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[68977.823262] sr0: CDROM not ready.  Make sure there is a disc in the drive.
>[71766.574529] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[71766.583224] cfg80211: Calling CRDA to update world regulatory domain
>[71766.619646] cfg80211: World regulatory domain updated:
>[71766.619652] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[71766.619654] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71766.619656] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71766.619658] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[71766.619659] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[71766.619661] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[71766.619662] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[71766.661923] PM: Syncing filesystems ... done.
>[71766.714368] PM: Preparing system for mem sleep
>[71766.721033] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[71766.722638] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[71766.723828] PM: Entering mem sleep
>[71766.723900] Suspending console(s) (use no_console_suspend to debug)
>[71766.724181] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[71766.724216] sd 0:0:0:0: [sda] Stopping disk
>[71767.191902] PM: suspend of devices complete after 468.135 msecs
>[71767.192075] PM: late suspend of devices complete after 0.170 msecs
>[71767.192256] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[71767.202886] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[71767.224984] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[71767.236148] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[71767.257837] PM: noirq suspend of devices complete after 65.791 msecs
>[71767.258425] ACPI: Preparing to enter system sleep state S3
>[71767.260102] PM: Saving platform NVS memory
>[71767.261607] Disabling non-boot CPUs ...
>[71767.262084] Broke affinity for irq 41
>[71767.263532] kvm: disabling virtualization on CPU1
>[71767.263549] smpboot: CPU 1 is now offline
>[71767.265925] kvm: disabling virtualization on CPU2
>[71767.265942] smpboot: CPU 2 is now offline
>[71767.267964] kvm: disabling virtualization on CPU3
>[71767.267988] smpboot: CPU 3 is now offline
>[71767.269733] ACPI: Low-level resume complete
>[71767.269774] PM: Restoring platform NVS memory
>[71767.270478] CPU0: Thermal monitoring handled by SMI
>[71767.270484] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[71767.270521] Enabling non-boot CPUs ...
>[71767.270554] x86: Booting SMP configuration:
>[71767.270554] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[71767.282009] Disabled fast string operations
>[71767.282023] CPU1: Thermal monitoring handled by SMI
>[71767.282049] kvm: enabling virtualization on CPU1
>[71767.284351] Intel pstate controlling: cpu 1
>[71767.284430] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[71767.285629] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[71767.285640] CPU1 is up
>[71767.285656] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[71767.296679] Disabled fast string operations
>[71767.296693] CPU2: Thermal monitoring handled by SMI
>[71767.296719] kvm: enabling virtualization on CPU2
>[71767.299097] Intel pstate controlling: cpu 2
>[71767.299188] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[71767.300183] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[71767.300192] CPU2 is up
>[71767.300210] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[71767.311332] Disabled fast string operations
>[71767.311345] CPU3: Thermal monitoring handled by SMI
>[71767.311367] kvm: enabling virtualization on CPU3
>[71767.313581] Intel pstate controlling: cpu 3
>[71767.313618] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[71767.313621] CPU3 is up
>[71767.317039] ACPI: Waking up from system sleep state S3
>[71767.355816] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[71767.377791] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[71767.411801] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[71767.422915] PM: noirq resume of devices complete after 100.313 msecs
>[71767.423110] PM: early resume of devices complete after 0.149 msecs
>[71767.423218] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[71767.423373] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[71767.423576] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[71767.423647] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[71767.485864] [drm] Wrong MCH_SSKPD value: 0x16040307
>[71767.485865] [drm] This can cause pipe underruns and display issues.
>[71767.485865] [drm] Please upgrade your BIOS to fix this.
>[71767.630794] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[71767.728560] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[71767.730559] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[71767.734720] ata2.00: configured for UDMA/100
>[71767.739038] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[71767.749054] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[71767.749848] ata1.00: configured for UDMA/133
>[71767.749993] sd 0:0:0:0: [sda] Starting disk
>[71767.778697] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[71768.048606] PM: resume of devices complete after 625.812 msecs
>[71768.049569] PM: Finishing wakeup.
>[71768.049789] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[71768.049896] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[71768.049972] r8169 0000:06:00.0: no hotplug settings from platform
>[71768.049572] Restarting tasks ... done.
>[71768.059562] video LNXVIDEO:00: Restoring backlight state
>[71768.059567] video LNXVIDEO:01: Restoring backlight state
>[71768.220072] r8169 0000:06:00.0 p5p1: link down
>[71768.220111] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[71768.221716] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[71768.228729] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[71768.292893] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[71769.394513] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[71769.401951] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[71769.404703] wlp3s0: authenticated
>[71769.405726] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[71769.409038] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=3)
>[71769.412169] wlp3s0: associated
>[71769.412197] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[71769.473628] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[75344.438599] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[75344.447327] cfg80211: Calling CRDA to update world regulatory domain
>[75344.490415] cfg80211: World regulatory domain updated:
>[75344.490419] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[75344.490422] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75344.490424] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75344.490425] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[75344.490427] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[75344.490429] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[75344.490430] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[75345.281034] PM: Syncing filesystems ... done.
>[75345.299948] PM: Preparing system for mem sleep
>[75345.300437] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[75345.302014] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[75345.303212] PM: Entering mem sleep
>[75345.303307] Suspending console(s) (use no_console_suspend to debug)
>[75345.303531] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[75345.303709] sd 0:0:0:0: [sda] Stopping disk
>[75345.503285] psmouse serio1: Failed to disable mouse on isa0060/serio1
>[75345.956136] PM: suspend of devices complete after 653.062 msecs
>[75345.956400] PM: late suspend of devices complete after 0.259 msecs
>[75345.956713] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[75345.967100] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[75345.989183] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[75346.000352] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[75346.022029] PM: noirq suspend of devices complete after 65.659 msecs
>[75346.022617] ACPI: Preparing to enter system sleep state S3
>[75346.024061] PM: Saving platform NVS memory
>[75346.025456] Disabling non-boot CPUs ...
>[75346.025948] Broke affinity for irq 41
>[75346.027490] kvm: disabling virtualization on CPU1
>[75346.027523] smpboot: CPU 1 is now offline
>[75346.029100] Broke affinity for irq 50
>[75346.030127] kvm: disabling virtualization on CPU2
>[75346.030146] smpboot: CPU 2 is now offline
>[75346.032025] kvm: disabling virtualization on CPU3
>[75346.032051] smpboot: CPU 3 is now offline
>[75346.033695] ACPI: Low-level resume complete
>[75346.033735] PM: Restoring platform NVS memory
>[75346.034434] CPU0: Thermal monitoring handled by SMI
>[75346.034440] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[75346.034491] Enabling non-boot CPUs ...
>[75346.034524] x86: Booting SMP configuration:
>[75346.034524] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[75346.045982] Disabled fast string operations
>[75346.045997] CPU1: Thermal monitoring handled by SMI
>[75346.046024] kvm: enabling virtualization on CPU1
>[75346.048317] Intel pstate controlling: cpu 1
>[75346.048393] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[75346.049568] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[75346.049577] CPU1 is up
>[75346.049593] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[75346.060615] Disabled fast string operations
>[75346.060629] CPU2: Thermal monitoring handled by SMI
>[75346.060655] kvm: enabling virtualization on CPU2
>[75346.063060] Intel pstate controlling: cpu 2
>[75346.063155] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[75346.064153] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[75346.064159] CPU2 is up
>[75346.064175] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[75346.075198] Disabled fast string operations
>[75346.075211] CPU3: Thermal monitoring handled by SMI
>[75346.075234] kvm: enabling virtualization on CPU3
>[75346.077444] Intel pstate controlling: cpu 3
>[75346.077480] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[75346.077484] CPU3 is up
>[75346.080859] ACPI: Waking up from system sleep state S3
>[75346.118938] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[75346.140895] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[75346.174908] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[75346.186026] PM: noirq resume of devices complete after 99.376 msecs
>[75346.186223] PM: early resume of devices complete after 0.151 msecs
>[75346.186319] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[75346.186584] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[75346.186608] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[75346.186616] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[75346.247936] [drm] Wrong MCH_SSKPD value: 0x16040307
>[75346.247937] [drm] This can cause pipe underruns and display issues.
>[75346.247937] [drm] Please upgrade your BIOS to fix this.
>[75346.393942] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[75346.491685] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[75346.493737] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[75346.494711] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[75346.496075] ata2.00: configured for UDMA/100
>[75346.504690] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[75346.505528] ata1.00: configured for UDMA/133
>[75346.505665] sd 0:0:0:0: [sda] Starting disk
>[75346.541864] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[75346.811684] PM: resume of devices complete after 625.774 msecs
>[75346.812700] PM: Finishing wakeup.
>[75346.812950] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[75346.813036] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[75346.813071] r8169 0000:06:00.0: no hotplug settings from platform
>[75346.812703] Restarting tasks ... done.
>[75346.819829] video LNXVIDEO:00: Restoring backlight state
>[75346.819833] video LNXVIDEO:01: Restoring backlight state
>[75346.991168] r8169 0000:06:00.0 p5p1: link down
>[75346.991203] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[75346.991961] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[75346.998642] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[75347.074795] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[75348.030892] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[75348.158966] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[75348.168059] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[75348.170809] wlp3s0: authenticated
>[75348.171749] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[75348.175071] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=3)
>[75348.177417] wlp3s0: associated
>[75348.177451] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[76493.927190] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[76493.933905] cfg80211: Calling CRDA to update world regulatory domain
>[76493.987664] cfg80211: World regulatory domain updated:
>[76493.987679] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[76493.987682] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[76493.987683] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[76493.987685] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[76493.987686] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[76493.987687] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[76493.987689] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[76494.029368] PM: Syncing filesystems ... done.
>[76494.055452] PM: Preparing system for mem sleep
>[76494.056257] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[76494.057896] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[76494.058678] PM: Entering mem sleep
>[76494.058745] Suspending console(s) (use no_console_suspend to debug)
>[76494.058955] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[76494.058990] sd 0:0:0:0: [sda] Stopping disk
>[76494.523467] PM: suspend of devices complete after 464.862 msecs
>[76494.523712] PM: late suspend of devices complete after 0.241 msecs
>[76494.524006] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[76494.534465] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[76494.556566] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[76494.567730] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[76494.589408] PM: noirq suspend of devices complete after 65.726 msecs
>[76494.589996] ACPI: Preparing to enter system sleep state S3
>[76494.592028] PM: Saving platform NVS memory
>[76494.593392] Disabling non-boot CPUs ...
>[76494.594088] Broke affinity for irq 41
>[76494.595351] kvm: disabling virtualization on CPU1
>[76494.595573] smpboot: CPU 1 is now offline
>[76494.597412] kvm: disabling virtualization on CPU2
>[76494.597420] smpboot: CPU 2 is now offline
>[76494.598255] Broke affinity for irq 50
>[76494.599267] kvm: disabling virtualization on CPU3
>[76494.599284] smpboot: CPU 3 is now offline
>[76494.600748] ACPI: Low-level resume complete
>[76494.600788] PM: Restoring platform NVS memory
>[76494.601483] CPU0: Thermal monitoring handled by SMI
>[76494.601489] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[76494.601523] Enabling non-boot CPUs ...
>[76494.601556] x86: Booting SMP configuration:
>[76494.601557] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[76494.612872] Disabled fast string operations
>[76494.612886] CPU1: Thermal monitoring handled by SMI
>[76494.612912] kvm: enabling virtualization on CPU1
>[76494.615233] Intel pstate controlling: cpu 1
>[76494.615318] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[76494.616614] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[76494.616620] CPU1 is up
>[76494.616635] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[76494.627657] Disabled fast string operations
>[76494.627671] CPU2: Thermal monitoring handled by SMI
>[76494.627697] kvm: enabling virtualization on CPU2
>[76494.630118] Intel pstate controlling: cpu 2
>[76494.630208] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[76494.631205] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[76494.631210] CPU2 is up
>[76494.631226] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[76494.642248] Disabled fast string operations
>[76494.642262] CPU3: Thermal monitoring handled by SMI
>[76494.642285] kvm: enabling virtualization on CPU3
>[76494.644495] Intel pstate controlling: cpu 3
>[76494.644532] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[76494.644535] CPU3 is up
>[76494.647908] ACPI: Waking up from system sleep state S3
>[76494.687079] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[76494.709051] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[76494.743065] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[76494.754183] PM: noirq resume of devices complete after 100.053 msecs
>[76494.754382] PM: early resume of devices complete after 0.152 msecs
>[76494.754495] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[76494.754696] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[76494.754982] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[76494.760187] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[76494.816095] [drm] Wrong MCH_SSKPD value: 0x16040307
>[76494.816096] [drm] This can cause pipe underruns and display issues.
>[76494.816096] [drm] Please upgrade your BIOS to fix this.
>[76494.965105] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[76495.059834] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[76495.062829] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[76495.066610] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[76495.066778] ata2.00: configured for UDMA/100
>[76495.076570] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[76495.077395] ata1.00: configured for UDMA/133
>[76495.077551] sd 0:0:0:0: [sda] Starting disk
>[76495.122969] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[76495.234274] PM: resume of devices complete after 480.132 msecs
>[76495.235330] PM: Finishing wakeup.
>[76495.235507] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[76495.235632] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[76495.235745] r8169 0000:06:00.0: no hotplug settings from platform
>[76495.235334] Restarting tasks ... done.
>[76495.247128] video LNXVIDEO:00: Restoring backlight state
>[76495.247134] video LNXVIDEO:01: Restoring backlight state
>[76495.433425] r8169 0000:06:00.0 p5p1: link down
>[76495.433476] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[76495.434561] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[76495.442310] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[76495.517682] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[76496.329123] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[76496.597771] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[76496.606790] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[76496.609539] wlp3s0: authenticated
>[76496.610013] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[76496.615654] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=3)
>[76496.618010] wlp3s0: associated
>[76496.618040] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[77002.068535] sr0: CDROM not ready.  Make sure there is a disc in the drive.
>[79736.666749] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[79736.674337] cfg80211: Calling CRDA to update world regulatory domain
>[79736.715497] cfg80211: World regulatory domain updated:
>[79736.715505] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[79736.715507] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[79736.715509] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[79736.715510] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[79736.715511] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[79736.715513] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[79736.715514] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[79736.754316] PM: Syncing filesystems ... done.
>[79736.775875] PM: Preparing system for mem sleep
>[79736.776607] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[79736.778198] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[79736.779234] PM: Entering mem sleep
>[79736.779308] Suspending console(s) (use no_console_suspend to debug)
>[79736.779569] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[79736.779605] sd 0:0:0:0: [sda] Stopping disk
>[79737.236985] PM: suspend of devices complete after 457.810 msecs
>[79737.237242] PM: late suspend of devices complete after 0.251 msecs
>[79737.237531] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[79737.248028] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[79737.270128] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[79737.281307] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[79737.302975] PM: noirq suspend of devices complete after 65.763 msecs
>[79737.303563] ACPI: Preparing to enter system sleep state S3
>[79737.305490] PM: Saving platform NVS memory
>[79737.307091] Disabling non-boot CPUs ...
>[79737.309659] kvm: disabling virtualization on CPU1
>[79737.309683] smpboot: CPU 1 is now offline
>[79737.311943] kvm: disabling virtualization on CPU2
>[79737.311961] smpboot: CPU 2 is now offline
>[79737.312692] Broke affinity for irq 41
>[79737.312853] Broke affinity for irq 50
>[79737.313871] kvm: disabling virtualization on CPU3
>[79737.313892] smpboot: CPU 3 is now offline
>[79737.315654] ACPI: Low-level resume complete
>[79737.315693] PM: Restoring platform NVS memory
>[79737.316390] CPU0: Thermal monitoring handled by SMI
>[79737.316397] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[79737.316448] Enabling non-boot CPUs ...
>[79737.316480] x86: Booting SMP configuration:
>[79737.316481] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[79737.327935] Disabled fast string operations
>[79737.327950] CPU1: Thermal monitoring handled by SMI
>[79737.327976] kvm: enabling virtualization on CPU1
>[79737.330341] Intel pstate controlling: cpu 1
>[79737.330442] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[79737.332039] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[79737.332049] CPU1 is up
>[79737.332066] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[79737.343088] Disabled fast string operations
>[79737.343102] CPU2: Thermal monitoring handled by SMI
>[79737.343127] kvm: enabling virtualization on CPU2
>[79737.345520] Intel pstate controlling: cpu 2
>[79737.345612] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[79737.346610] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[79737.346619] CPU2 is up
>[79737.346638] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[79737.357668] Disabled fast string operations
>[79737.357681] CPU3: Thermal monitoring handled by SMI
>[79737.357703] kvm: enabling virtualization on CPU3
>[79737.359917] Intel pstate controlling: cpu 3
>[79737.359955] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[79737.359958] CPU3 is up
>[79737.363459] ACPI: Waking up from system sleep state S3
>[79737.403753] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[79737.425720] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[79737.459733] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[79737.470850] PM: noirq resume of devices complete after 100.058 msecs
>[79737.471050] PM: early resume of devices complete after 0.153 msecs
>[79737.471157] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[79737.471378] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[79737.471390] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[79737.471520] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[79737.532792] [drm] Wrong MCH_SSKPD value: 0x16040307
>[79737.532793] [drm] This can cause pipe underruns and display issues.
>[79737.532793] [drm] Please upgrade your BIOS to fix this.
>[79737.678651] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[79737.775452] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[79737.777476] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[79737.778441] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[79737.779490] ata2.00: configured for UDMA/100
>[79737.788368] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[79737.789210] ata1.00: configured for UDMA/133
>[79737.789327] sd 0:0:0:0: [sda] Starting disk
>[79737.836640] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[79737.947887] PM: resume of devices complete after 477.079 msecs
>[79737.948425] PM: Finishing wakeup.
>[79737.948579] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[79737.948655] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[79737.948693] r8169 0000:06:00.0: no hotplug settings from platform
>[79737.948426] Restarting tasks ... done.
>[79737.958967] video LNXVIDEO:00: Restoring backlight state
>[79737.958971] video LNXVIDEO:01: Restoring backlight state
>[79738.124089] r8169 0000:06:00.0 p5p1: link down
>[79738.124439] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[79738.125581] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[79738.132454] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[79738.212565] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[79739.050853] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[79739.336229] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[79739.345114] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[79739.347899] wlp3s0: authenticated
>[79739.348664] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[79739.351977] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=3)
>[79739.355439] wlp3s0: associated
>[79739.355476] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[83797.463754] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[83797.508592] cfg80211: Calling CRDA to update world regulatory domain
>[83797.518466] cfg80211: World regulatory domain updated:
>[83797.518471] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[83797.518473] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[83797.518475] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[83797.518477] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[83797.518478] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[83797.518479] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[83797.518481] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[83797.555745] PM: Syncing filesystems ... done.
>[83797.578969] PM: Preparing system for mem sleep
>[83797.579753] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[83797.580929] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[83797.581925] PM: Entering mem sleep
>[83797.581982] Suspending console(s) (use no_console_suspend to debug)
>[83797.582232] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[83797.582558] sd 0:0:0:0: [sda] Stopping disk
>[83798.042719] PM: suspend of devices complete after 460.874 msecs
>[83798.042953] PM: late suspend of devices complete after 0.229 msecs
>[83798.043230] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[83798.053681] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[83798.075785] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[83798.086953] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[83798.108631] PM: noirq suspend of devices complete after 65.709 msecs
>[83798.109219] ACPI: Preparing to enter system sleep state S3
>[83798.110780] PM: Saving platform NVS memory
>[83798.112368] Disabling non-boot CPUs ...
>[83798.113430] Broke affinity for irq 41
>[83798.114879] kvm: disabling virtualization on CPU1
>[83798.114903] smpboot: CPU 1 is now offline
>[83798.117027] kvm: disabling virtualization on CPU2
>[83798.117032] smpboot: CPU 2 is now offline
>[83798.117789] Broke affinity for irq 50
>[83798.118807] kvm: disabling virtualization on CPU3
>[83798.118825] smpboot: CPU 3 is now offline
>[83798.120391] ACPI: Low-level resume complete
>[83798.120431] PM: Restoring platform NVS memory
>[83798.121128] CPU0: Thermal monitoring handled by SMI
>[83798.121134] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[83798.121177] Enabling non-boot CPUs ...
>[83798.121208] x86: Booting SMP configuration:
>[83798.121209] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[83798.132657] Disabled fast string operations
>[83798.132671] CPU1: Thermal monitoring handled by SMI
>[83798.132697] kvm: enabling virtualization on CPU1
>[83798.135066] Intel pstate controlling: cpu 1
>[83798.135167] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[83798.136729] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[83798.136739] CPU1 is up
>[83798.136757] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[83798.147779] Disabled fast string operations
>[83798.147793] CPU2: Thermal monitoring handled by SMI
>[83798.147818] kvm: enabling virtualization on CPU2
>[83798.150013] Intel pstate controlling: cpu 2
>[83798.150052] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[83798.150402] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[83798.150406] CPU2 is up
>[83798.150421] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[83798.161442] Disabled fast string operations
>[83798.161455] CPU3: Thermal monitoring handled by SMI
>[83798.161477] kvm: enabling virtualization on CPU3
>[83798.163692] Intel pstate controlling: cpu 3
>[83798.163727] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[83798.163730] CPU3 is up
>[83798.167114] ACPI: Waking up from system sleep state S3
>[83798.206308] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[83798.228278] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[83798.262290] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[83798.273408] PM: noirq resume of devices complete after 99.904 msecs
>[83798.273607] PM: early resume of devices complete after 0.153 msecs
>[83798.273714] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[83798.273982] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[83798.274007] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[83798.274035] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[83798.334361] [drm] Wrong MCH_SSKPD value: 0x16040307
>[83798.334361] [drm] This can cause pipe underruns and display issues.
>[83798.334362] [drm] Please upgrade your BIOS to fix this.
>[83798.487293] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[83798.579061] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[83798.581059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[83798.584885] ata2.00: configured for UDMA/100
>[83798.587073] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[83798.597102] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[83798.597921] ata1.00: configured for UDMA/133
>[83798.599137] sd 0:0:0:0: [sda] Starting disk
>[83798.636209] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[83798.905167] PM: resume of devices complete after 631.877 msecs
>[83798.906255] PM: Finishing wakeup.
>[83798.906424] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[83798.906257] Restarting tasks ... done.
>[83798.907376] video LNXVIDEO:00: Restoring backlight state
>[83798.907382] video LNXVIDEO:01: Restoring backlight state
>[83798.911078] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[83798.911141] r8169 0000:06:00.0: no hotplug settings from platform
>[83799.077540] r8169 0000:06:00.0 p5p1: link down
>[83799.077578] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[83799.078514] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[83799.085255] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[83799.148295] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[83799.701432] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[83800.229725] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[83800.238597] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[83800.242210] wlp3s0: authenticated
>[83800.243143] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[83800.246594] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=3)
>[83800.252856] wlp3s0: associated
>[83800.252888] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[83806.343456] sr0: CDROM not ready.  Make sure there is a disc in the drive.
>[85886.831468] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[85886.839322] cfg80211: Calling CRDA to update world regulatory domain
>[85886.847519] cfg80211: World regulatory domain updated:
>[85886.847524] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[85886.847526] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[85886.847527] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[85886.847529] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[85886.847530] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[85886.847531] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[85886.847533] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[85886.937555] PM: Syncing filesystems ... done.
>[85886.999394] PM: Preparing system for mem sleep
>[85887.001083] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[85887.002461] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[85887.003425] PM: Entering mem sleep
>[85887.003501] Suspending console(s) (use no_console_suspend to debug)
>[85887.003731] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[85887.003763] sd 0:0:0:0: [sda] Stopping disk
>[85887.458219] PM: suspend of devices complete after 454.851 msecs
>[85887.458442] PM: late suspend of devices complete after 0.220 msecs
>[85887.458668] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[85887.469218] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[85887.491314] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[85887.502484] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[85887.524163] PM: noirq suspend of devices complete after 65.750 msecs
>[85887.524751] ACPI: Preparing to enter system sleep state S3
>[85887.526477] PM: Saving platform NVS memory
>[85887.528052] Disabling non-boot CPUs ...
>[85887.529843] kvm: disabling virtualization on CPU1
>[85887.529863] smpboot: CPU 1 is now offline
>[85887.530901] Broke affinity for irq 41
>[85887.532261] kvm: disabling virtualization on CPU2
>[85887.532278] smpboot: CPU 2 is now offline
>[85887.534149] kvm: disabling virtualization on CPU3
>[85887.534171] smpboot: CPU 3 is now offline
>[85887.535763] ACPI: Low-level resume complete
>[85887.535802] PM: Restoring platform NVS memory
>[85887.536501] CPU0: Thermal monitoring handled by SMI
>[85887.536507] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[85887.536546] Enabling non-boot CPUs ...
>[85887.536578] x86: Booting SMP configuration:
>[85887.536579] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[85887.548034] Disabled fast string operations
>[85887.548049] CPU1: Thermal monitoring handled by SMI
>[85887.548075] kvm: enabling virtualization on CPU1
>[85887.550441] Intel pstate controlling: cpu 1
>[85887.550538] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[85887.552090] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[85887.552099] CPU1 is up
>[85887.552116] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[85887.563138] Disabled fast string operations
>[85887.563152] CPU2: Thermal monitoring handled by SMI
>[85887.563177] kvm: enabling virtualization on CPU2
>[85887.565366] Intel pstate controlling: cpu 2
>[85887.565404] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[85887.565755] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[85887.565777] CPU2 is up
>[85887.565792] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[85887.576913] Disabled fast string operations
>[85887.576926] CPU3: Thermal monitoring handled by SMI
>[85887.576949] kvm: enabling virtualization on CPU3
>[85887.579159] Intel pstate controlling: cpu 3
>[85887.579196] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[85887.579199] CPU3 is up
>[85887.582605] ACPI: Waking up from system sleep state S3
>[85887.621857] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[85887.643831] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[85887.677845] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[85887.688963] PM: noirq resume of devices complete after 99.493 msecs
>[85887.689161] PM: early resume of devices complete after 0.153 msecs
>[85887.689267] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[85887.689504] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[85887.689719] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[85887.695207] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[85887.750880] [drm] Wrong MCH_SSKPD value: 0x16040307
>[85887.750880] [drm] This can cause pipe underruns and display issues.
>[85887.750881] [drm] Please upgrade your BIOS to fix this.
>[85887.901704] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[85888.006608] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[85888.006639] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[85888.010045] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[85888.010117] ata2.00: configured for UDMA/100
>[85888.019988] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[85888.020841] ata1.00: configured for UDMA/133
>[85888.020972] sd 0:0:0:0: [sda] Starting disk
>[85888.059829] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[85888.171012] PM: resume of devices complete after 482.090 msecs
>[85888.172138] PM: Finishing wakeup.
>[85888.178981] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[85888.179075] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[85888.179134] r8169 0000:06:00.0: no hotplug settings from platform
>[85888.172142] Restarting tasks ... done.
>[85888.180982] video LNXVIDEO:00: Restoring backlight state
>[85888.180990] video LNXVIDEO:01: Restoring backlight state
>[85888.359193] r8169 0000:06:00.0 p5p1: link down
>[85888.359515] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[85888.360515] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[85888.367408] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[85888.431614] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[85888.756187] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[85889.490426] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[85889.502661] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[85889.505394] wlp3s0: authenticated
>[85889.505777] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[85889.509100] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=3)
>[85889.512359] wlp3s0: associated
>[85889.512390] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[85899.381068] sr0: CDROM not ready.  Make sure there is a disc in the drive.
>[87264.290799] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[87264.297365] cfg80211: Calling CRDA to update world regulatory domain
>[87264.309764] cfg80211: World regulatory domain updated:
>[87264.309768] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[87264.309771] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[87264.309773] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[87264.309775] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[87264.309776] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[87264.309778] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[87264.309780] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[87264.547516] PM: Syncing filesystems ... done.
>[87264.568447] PM: Preparing system for mem sleep
>[87264.569364] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[87264.570842] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[87264.571795] PM: Entering mem sleep
>[87264.571871] Suspending console(s) (use no_console_suspend to debug)
>[87264.572097] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[87264.572130] sd 0:0:0:0: [sda] Stopping disk
>[87265.037612] PM: suspend of devices complete after 465.883 msecs
>[87265.037851] PM: late suspend of devices complete after 0.236 msecs
>[87265.038127] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[87265.048595] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[87265.070691] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[87265.081858] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[87265.103538] PM: noirq suspend of devices complete after 65.717 msecs
>[87265.104126] ACPI: Preparing to enter system sleep state S3
>[87265.105664] PM: Saving platform NVS memory
>[87265.107171] Disabling non-boot CPUs ...
>[87265.109168] kvm: disabling virtualization on CPU1
>[87265.109175] smpboot: CPU 1 is now offline
>[87265.110875] kvm: disabling virtualization on CPU2
>[87265.110886] smpboot: CPU 2 is now offline
>[87265.111543] Broke affinity for irq 41
>[87265.112679] kvm: disabling virtualization on CPU3
>[87265.112686] smpboot: CPU 3 is now offline
>[87265.114189] ACPI: Low-level resume complete
>[87265.114230] PM: Restoring platform NVS memory
>[87265.114927] CPU0: Thermal monitoring handled by SMI
>[87265.114933] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[87265.114979] Enabling non-boot CPUs ...
>[87265.115011] x86: Booting SMP configuration:
>[87265.115011] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[87265.126467] Disabled fast string operations
>[87265.126482] CPU1: Thermal monitoring handled by SMI
>[87265.126508] kvm: enabling virtualization on CPU1
>[87265.128741] Intel pstate controlling: cpu 1
>[87265.128798] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[87265.129469] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[87265.129478] CPU1 is up
>[87265.129495] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[87265.140517] Disabled fast string operations
>[87265.140531] CPU2: Thermal monitoring handled by SMI
>[87265.140556] kvm: enabling virtualization on CPU2
>[87265.142747] Intel pstate controlling: cpu 2
>[87265.142785] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[87265.143136] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[87265.143139] CPU2 is up
>[87265.143153] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[87265.154175] Disabled fast string operations
>[87265.154188] CPU3: Thermal monitoring handled by SMI
>[87265.154211] kvm: enabling virtualization on CPU3
>[87265.156440] Intel pstate controlling: cpu 3
>[87265.156476] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[87265.156480] CPU3 is up
>[87265.159880] ACPI: Waking up from system sleep state S3
>[87265.198436] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[87265.220383] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[87265.254390] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[87265.265509] PM: noirq resume of devices complete after 100.332 msecs
>[87265.265708] PM: early resume of devices complete after 0.152 msecs
>[87265.265808] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[87265.266028] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[87265.266341] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[87265.266365] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[87265.326428] [drm] Wrong MCH_SSKPD value: 0x16040307
>[87265.326429] [drm] This can cause pipe underruns and display issues.
>[87265.326430] [drm] Please upgrade your BIOS to fix this.
>[87265.481347] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[87265.573161] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[87265.579158] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[87265.580321] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[87265.583399] ata2.00: configured for UDMA/100
>[87265.590315] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[87265.591184] ata1.00: configured for UDMA/133
>[87265.591304] sd 0:0:0:0: [sda] Starting disk
>[87265.639288] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[87265.750531] PM: resume of devices complete after 485.067 msecs
>[87265.751768] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[87265.751854] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[87265.751907] r8169 0000:06:00.0: no hotplug settings from platform
>[87265.751929] PM: Finishing wakeup.
>[87265.751932] Restarting tasks ... done.
>[87265.758607] video LNXVIDEO:00: Restoring backlight state
>[87265.758615] video LNXVIDEO:01: Restoring backlight state
>[87265.925736] r8169 0000:06:00.0 p5p1: link down
>[87265.925775] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[87265.926992] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[87265.933702] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[87266.003034] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[87266.490687] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[87267.074829] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[87267.080891] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[87267.083640] wlp3s0: authenticated
>[87267.084316] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[87267.087642] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=3)
>[87267.089965] wlp3s0: associated
>[87267.089990] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[88164.501624] sr0: CDROM not ready.  Make sure there is a disc in the drive.
>[89486.663905] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[89486.676672] cfg80211: Calling CRDA to update world regulatory domain
>[89486.708861] cfg80211: World regulatory domain updated:
>[89486.708868] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[89486.708871] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[89486.708872] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[89486.708874] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[89486.708875] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[89486.708877] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[89486.708879] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[89486.878183] PM: Syncing filesystems ... done.
>[89486.939477] PM: Preparing system for mem sleep
>[89486.940235] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[89486.941791] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[89486.942975] PM: Entering mem sleep
>[89486.943054] Suspending console(s) (use no_console_suspend to debug)
>[89486.943575] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[89486.943608] sd 0:0:0:0: [sda] Stopping disk
>[89487.400824] PM: suspend of devices complete after 457.911 msecs
>[89487.401000] PM: late suspend of devices complete after 0.173 msecs
>[89487.401178] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[89487.411853] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[89487.433929] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[89487.445106] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[89487.466761] PM: noirq suspend of devices complete after 65.789 msecs
>[89487.467291] ACPI: Preparing to enter system sleep state S3
>[89487.468916] PM: Saving platform NVS memory
>[89487.470843] Disabling non-boot CPUs ...
>[89487.473153] kvm: disabling virtualization on CPU1
>[89487.473171] smpboot: CPU 1 is now offline
>[89487.473933] Broke affinity for irq 41
>[89487.475381] kvm: disabling virtualization on CPU2
>[89487.475391] smpboot: CPU 2 is now offline
>[89487.476214] Broke affinity for irq 50
>[89487.477231] kvm: disabling virtualization on CPU3
>[89487.477241] smpboot: CPU 3 is now offline
>[89487.478785] ACPI: Low-level resume complete
>[89487.478825] PM: Restoring platform NVS memory
>[89487.479524] CPU0: Thermal monitoring handled by SMI
>[89487.479530] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[89487.479585] Enabling non-boot CPUs ...
>[89487.479617] x86: Booting SMP configuration:
>[89487.479618] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[89487.491074] Disabled fast string operations
>[89487.491089] CPU1: Thermal monitoring handled by SMI
>[89487.491117] kvm: enabling virtualization on CPU1
>[89487.493435] Intel pstate controlling: cpu 1
>[89487.493520] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[89487.494806] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[89487.494815] CPU1 is up
>[89487.494832] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[89487.505955] Disabled fast string operations
>[89487.505968] CPU2: Thermal monitoring handled by SMI
>[89487.505994] kvm: enabling virtualization on CPU2
>[89487.508377] Intel pstate controlling: cpu 2
>[89487.508471] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[89487.509469] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[89487.509478] CPU2 is up
>[89487.509497] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[89487.520520] Disabled fast string operations
>[89487.520533] CPU3: Thermal monitoring handled by SMI
>[89487.520556] kvm: enabling virtualization on CPU3
>[89487.522771] Intel pstate controlling: cpu 3
>[89487.522808] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[89487.522812] CPU3 is up
>[89487.526346] ACPI: Waking up from system sleep state S3
>[89487.565632] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[89487.587603] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[89487.620613] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[89487.631731] PM: noirq resume of devices complete after 98.528 msecs
>[89487.631929] PM: early resume of devices complete after 0.153 msecs
>[89487.632040] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
>[89487.632241] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[89487.632303] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[89487.632327] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
>[89487.694684] [drm] Wrong MCH_SSKPD value: 0x16040307
>[89487.694685] [drm] This can cause pipe underruns and display issues.
>[89487.694685] [drm] Please upgrade your BIOS to fix this.
>[89487.839661] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[89487.936384] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[89487.938337] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[89487.940974] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[89487.942222] ata2.00: configured for UDMA/100
>[89487.950935] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[89487.951763] ata1.00: configured for UDMA/133
>[89487.951892] sd 0:0:0:0: [sda] Starting disk
>[89487.997595] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[89488.108920] PM: resume of devices complete after 477.219 msecs
>[89488.109941] PM: Finishing wakeup.
>[89488.110142] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[89488.110245] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[89488.110295] r8169 0000:06:00.0: no hotplug settings from platform
>[89488.109944] Restarting tasks ... done.
>[89488.118076] video LNXVIDEO:00: Restoring backlight state
>[89488.118082] video LNXVIDEO:01: Restoring backlight state
>[89488.288977] r8169 0000:06:00.0 p5p1: link down
>[89488.289012] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[89488.290100] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[89488.296969] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[89488.378774] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[89489.121787] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[89489.431968] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[89489.441177] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[89489.443928] wlp3s0: authenticated
>[89489.444569] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[89489.447875] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=3)
>[89489.450277] wlp3s0: associated
>[89489.450336] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[89889.734954] sr0: CDROM not ready.  Make sure there is a disc in the drive.
>[92445.362498] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[92445.381387] cfg80211: Calling CRDA to update world regulatory domain
>[92445.428072] cfg80211: World regulatory domain updated:
>[92445.428081] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[92445.428084] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[92445.428085] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[92445.428087] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[92445.428088] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[92445.428089] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[92445.428091] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[92445.462598] PM: Syncing filesystems ... done.
>[92445.493128] PM: Preparing system for mem sleep
>[92445.493828] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[92445.495055] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[92445.496017] PM: Entering mem sleep
>[92445.496095] Suspending console(s) (use no_console_suspend to debug)
>[92445.496746] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[92445.496778] sd 0:0:0:0: [sda] Stopping disk
>[92445.959806] PM: suspend of devices complete after 463.855 msecs
>[92445.960090] PM: late suspend of devices complete after 0.280 msecs
>[92445.960425] r8169 0000:06:00.0: System wakeup enabled by ACPI
>[92445.970834] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
>[92445.992914] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[92446.004090] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[92446.025760] PM: noirq suspend of devices complete after 65.699 msecs
>[92446.026347] ACPI: Preparing to enter system sleep state S3
>[92446.027910] PM: Saving platform NVS memory
>[92446.029520] Disabling non-boot CPUs ...
>[92446.032230] kvm: disabling virtualization on CPU1
>[92446.032256] smpboot: CPU 1 is now offline
>[92446.034532] kvm: disabling virtualization on CPU2
>[92446.034553] smpboot: CPU 2 is now offline
>[92446.035325] Broke affinity for irq 41
>[92446.035488] Broke affinity for irq 50
>[92446.036509] kvm: disabling virtualization on CPU3
>[92446.036527] smpboot: CPU 3 is now offline
>[92446.038225] ACPI: Low-level resume complete
>[92446.038265] PM: Restoring platform NVS memory
>[92446.038960] CPU0: Thermal monitoring handled by SMI
>[92446.038967] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
>[92446.039021] Enabling non-boot CPUs ...
>[92446.039053] x86: Booting SMP configuration:
>[92446.039054] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[92446.050513] Disabled fast string operations
>[92446.050527] CPU1: Thermal monitoring handled by SMI
>[92446.050555] kvm: enabling virtualization on CPU1
>[92446.052905] Intel pstate controlling: cpu 1
>[92446.052999] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x15
>[92446.053606] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
>[92446.053610] CPU1 is up
>[92446.053626] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[92446.064648] Disabled fast string operations
>[92446.064662] CPU2: Thermal monitoring handled by SMI
>[92446.064688] kvm: enabling virtualization on CPU2
>[92446.066877] Intel pstate controlling: cpu 2
>[92446.066915] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x15
>[92446.067265] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
>[92446.067268] CPU2 is up
>[92446.067281] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[92446.078302] Disabled fast string operations
>[92446.078315] CPU3: Thermal monitoring handled by SMI
>[92446.078338] kvm: enabling virtualization on CPU3
>[92446.080550] Intel pstate controlling: cpu 3
>[92446.080587] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
>[92446.080591] CPU3 is up
>[92446.083984] ACPI: Waking up from system sleep state S3
>[92446.122747] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[92446.144715] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[92446.178725] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
>[92446.189844] PM: noirq resume of devices complete after 100.077 msecs
>[92446.190042] PM: early resume of devices complete after 0.152 msecs
>[92446.190477] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[92446.190520] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[92446.190555] r8169 0000:06:00.0: System wakeup disabled by ACPI
>[92446.190681] mei_me 0000:00:16.0: irq 51 for MSI/MSI-X
>[92446.249767] [drm] Wrong MCH_SSKPD value: 0x16040307
>[92446.249768] [drm] This can cause pipe underruns and display issues.
>[92446.249768] [drm] Please upgrade your BIOS to fix this.
>[92446.397675] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
>[92446.495486] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[92446.497484] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[92446.498839] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[92446.501852] ata2.00: configured for UDMA/100
>[92446.508834] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>[92446.509644] ata1.00: configured for UDMA/133
>[92446.509784] sd 0:0:0:0: [sda] Starting disk
>[92446.535585] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
>[92446.815603] PM: resume of devices complete after 625.878 msecs
>[92446.816531] PM: Finishing wakeup.
>[92446.816726] iwlwifi 0000:03:00.0: no hotplug settings from platform
>[92446.817789] xhci_hcd 0000:04:00.0: no hotplug settings from platform
>[92446.817833] r8169 0000:06:00.0: no hotplug settings from platform
>[92446.816533] Restarting tasks ... done.
>[92446.840969] video LNXVIDEO:00: Restoring backlight state
>[92446.840974] video LNXVIDEO:01: Restoring backlight state
>[92447.006981] r8169 0000:06:00.0 p5p1: link down
>[92447.007130] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[92447.007993] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[92447.014734] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[92447.077177] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[92447.591971] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[92448.122063] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[92448.131095] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[92448.133868] wlp3s0: authenticated
>[92448.134645] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[92448.137994] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[92448.140344] wlp3s0: associated
>[92448.140373] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[95695.705398] ------------[ cut here ]------------
>[95695.705421] WARNING: CPU: 0 PID: 24789 at drivers/net/wireless/iwlwifi/pcie/tx.c:1505 iwl_trans_pcie_send_hcmd+0x394/0x690 [iwlwifi]()
>[95695.705423] Command REPLY_BT_CONFIG: a command is already active!
>[95695.705425] Modules linked in: rfcomm fuse ccm ip6t_rpfilter ip6t_REJECT xt_conntrack bnep ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw x86_pkg_temp_thermal coretemp kvm_intel kvm iTCO_wdt dell_wmi iTCO_vendor_support sparse_keymap crct10dif_pclmul crc32_pclmul dell_laptop dcdbas crc32c_intel ghash_clmulni_intel arc4 iwldvm joydev mac80211 microcode serio_raw snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec iwlwifi uvcvideo snd_hwdep nouveau snd_seq snd_seq_device btusb snd_pcm cfg80211 videobuf2_vmalloc videobuf2_memops
>[95695.705467]  bluetooth videobuf2_core snd_page_alloc mxm_wmi r8169 snd_timer i2c_i801 ttm videodev rfkill mei_me snd media lpc_ich mii mei soundcore shpchp mfd_core binfmt_misc i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video
>[95695.705487] CPU: 0 PID: 24789 Comm: kworker/u16:0 Not tainted 3.13.5-200.fc20.x86_64 #1
>[95695.705490] Hardware name: Dell Inc.          Dell System XPS L502X/0NJT03, BIOS A05 05/04/2011
>[95695.705496] Workqueue: iwlwifi iwl_bg_bt_runtime_config [iwldvm]
>[95695.705499]  0000000000000009 ffff8801527abb78 ffffffff81686fdc ffff8801527abbc0
>[95695.705503]  ffff8801527abbb0 ffffffff8106d47d ffff8801b4510000 00000000ffffff91
>[95695.705506]  0000000000000000 00000000ffff0000 ffff8801527abca0 ffff8801527abc10
>[95695.705510] Call Trace:
>[95695.705518]  [<ffffffff81686fdc>] dump_stack+0x45/0x56
>[95695.705531]  [<ffffffff8106d47d>] warn_slowpath_common+0x7d/0xa0
>[95695.705535]  [<ffffffff8106d4ec>] warn_slowpath_fmt+0x4c/0x50
>[95695.705547]  [<ffffffffa0305374>] iwl_trans_pcie_send_hcmd+0x394/0x690 [iwlwifi]
>[95695.705551]  [<ffffffff81689cc9>] ? schedule_timeout+0x239/0x2d0
>[95695.705560]  [<ffffffffa05cb556>] iwl_dvm_send_cmd+0x46/0x110 [iwldvm]
>[95695.705569]  [<ffffffffa05cb951>] iwl_dvm_send_cmd_pdu+0x41/0x50 [iwldvm]
>[95695.705576]  [<ffffffffa05cbd2d>] iwlagn_send_advance_bt_config+0x32d/0x3f0 [iwldvm]
>[95695.705582]  [<ffffffff8109e266>] ? try_to_wake_up+0x1e6/0x290
>[95695.705588]  [<ffffffff8107920b>] ? lock_timer_base.isra.35+0x2b/0x50
>[95695.705594]  [<ffffffffa05be1d6>] iwl_bg_bt_runtime_config+0x46/0x50 [iwldvm]
>[95695.705598]  [<ffffffff81087b56>] process_one_work+0x176/0x430
>[95695.705602]  [<ffffffff8108878b>] worker_thread+0x11b/0x3a0
>[95695.705605]  [<ffffffff81088670>] ? rescuer_thread+0x350/0x350
>[95695.705609]  [<ffffffff8108f252>] kthread+0xd2/0xf0
>[95695.705614]  [<ffffffff8108f180>] ? insert_kthread_work+0x40/0x40
>[95695.705618]  [<ffffffff81695efc>] ret_from_fork+0x7c/0xb0
>[95695.705622]  [<ffffffff8108f180>] ? insert_kthread_work+0x40/0x40
>[95695.705624] ---[ end trace 61a2805963fbf250 ]---
>[95695.705628] iwlwifi 0000:03:00.0: failed to send BT Coex Config
>[95740.597471] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
>[95740.597540] wlp3s0: deauthenticating from 28:c6:8e:82:be:ac by local choice (reason=3)
>[95740.597566] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[95740.597568] wlp3s0: HW problem - can not stop rx aggregation for 28:c6:8e:82:be:ac tid 1
>[95740.597571] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[95740.597573] wlp3s0: HW problem - can not stop rx aggregation for 28:c6:8e:82:be:ac tid 2
>[95740.597576] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[95740.597577] wlp3s0: HW problem - can not stop rx aggregation for 28:c6:8e:82:be:ac tid 3
>[95740.597857] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[95740.597860] wlp3s0: failed to remove key (0, 28:c6:8e:82:be:ac) from hardware (-5)
>[95740.597950] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[95740.597955] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[95740.597960] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[95740.597965] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[95740.597975] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[95740.599041] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[95740.599047] wlp3s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-5)
>[95740.615073] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[95740.615106] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[95740.616633] cfg80211: Calling CRDA to update world regulatory domain
>[95740.624836] cfg80211: World regulatory domain updated:
>[95740.624841] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[95740.624844] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[95740.624846] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[95740.624848] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[95740.624849] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[95740.624850] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[95740.624852] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[95740.736194] usb 2-1.5: USB disconnect, device number 3
>[95742.318130] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[95742.320800] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[95742.327590] iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
>[95742.425053] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[95742.551201] usb 2-1.5: new full-speed USB device number 4 using ehci-pci
>[95742.759307] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
>[95742.759317] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[95743.444060] wlp3s0: authenticate with 28:c6:8e:82:be:ac
>[95743.453293] wlp3s0: send auth to 28:c6:8e:82:be:ac (try 1/3)
>[95743.455166] wlp3s0: authenticated
>[95743.455753] wlp3s0: associate with 28:c6:8e:82:be:ac (try 1/3)
>[95743.459073] wlp3s0: RX AssocResp from 28:c6:8e:82:be:ac (capab=0x411 status=0 aid=2)
>[95743.460989] wlp3s0: associated
>[95743.461023] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready

Actions: View

Attachments on bug 1046495: 841636 | 872676 | 872691