Attachment 874489 Details for Bug 983318 – output of lspci -nnvv

output of lspci -nnvv

LSPCI.txt (text/plain), 34.96 KB, created by Joshua on 2014-03-14 15:10:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joshua

Created: 2014-03-14 15:10:12 UTC

Size: 34.96 KB

patch

obsolete

>00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 18)
>	Subsystem: Dell Device [1028:0447]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
>
>00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 18) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000e000-0000efff
>	Memory behind bridge: fbe00000-fbefffff
>	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [88] Subsystem: Dell Device [1028:0447]
>	Capabilities: [80] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0f00c  Data: 4161
>	Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
>			ClockPM- Surprise- LLActRep- BwNot+
>		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>			Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
>		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>	Kernel driver in use: pcieport
>
>00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
>	Subsystem: Dell Device [1028:0447]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 47
>	Region 0: Memory at fbf09000 (64-bit, non-prefetchable) [size=16]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0f00c  Data: 4142
>	Kernel driver in use: mei_me
>
>00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
>	Subsystem: Dell Device [1028:0447]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fbf08000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Capabilities: [98] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: ehci-pci
>
>00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
>	Subsystem: Dell Device [1028:0447]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 49
>	Region 0: Memory at fbf00000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0f00c  Data: 4172
>	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=1 ArbSelect=Fixed TC/VC=02
>			Status:	NegoPending- InProgress-
>	Capabilities: [130 v1] Root Complex Link
>		Desc:	PortNumber=0f ComponentID=00 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed1c000
>	Kernel driver in use: snd_hda_intel
>
>00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=11, subordinate=11, sec-latency=0
>	I/O behind bridge: 00002000-00002fff
>	Memory behind bridge: d1600000-d17fffff
>	Prefetchable memory behind bridge: 00000000d1800000-00000000d19fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
>			ClockPM- Surprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>			Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0f00c  Data: 4181
>	Capabilities: [90] Subsystem: Dell Device [1028:0447]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport
>
>00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=12, subordinate=12, sec-latency=0
>	I/O behind bridge: 00003000-00003fff
>	Memory behind bridge: fbd00000-fbdfffff
>	Prefetchable memory behind bridge: 00000000d1a00000-00000000d1bfffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
>			ClockPM- Surprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>			Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0f00c  Data: 4191
>	Capabilities: [90] Subsystem: Dell Device [1028:0447]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport
>
>00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 06) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=13, subordinate=13, sec-latency=0
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: fb300000-fbcfffff
>	Prefetchable memory behind bridge: 00000000d0c00000-00000000d15fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
>			ClockPM- Surprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>			Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet- LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0f00c  Data: 41b1
>	Capabilities: [90] Subsystem: Dell Device [1028:0447]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport
>
>00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
>	I/O behind bridge: 0000c000-0000cfff
>	Memory behind bridge: fa900000-fb2fffff
>	Prefetchable memory behind bridge: 00000000d0100000-00000000d0afffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
>			ClockPM- Surprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>			Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0f00c  Data: 41c1
>	Capabilities: [90] Subsystem: Dell Device [1028:0447]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: pcieport
>
>00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
>	Subsystem: Dell Device [1028:0447]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 23
>	Region 0: Memory at fbf07000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Capabilities: [98] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP+
>	Kernel driver in use: ehci-pci
>
>00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=20, subordinate=20, sec-latency=32
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Subsystem: Dell Device [1028:0447]
>
>00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b0b] (rev 06)
>	Subsystem: Dell Device [1028:0447]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information: Len=10 <?>
>	Kernel driver in use: lpc_ich
>
>00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06) (prog-if 01 [AHCI 1.0])
>	Subsystem: Dell Device [1028:0447]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 45
>	Region 0: I/O ports at f070 [size=8]
>	Region 1: I/O ports at f060 [size=4]
>	Region 2: I/O ports at f050 [size=8]
>	Region 3: I/O ports at f040 [size=4]
>	Region 4: I/O ports at f020 [size=32]
>	Region 5: Memory at fbf06000 (32-bit, non-prefetchable) [size=2K]
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0a00c  Data: 41e1
>	Capabilities: [70] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
>	Capabilities: [b0] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: ahci
>
>00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
>	Subsystem: Dell Device [1028:0447]
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin C routed to IRQ 18
>	Region 0: Memory at fbf05000 (64-bit, non-prefetchable) [size=256]
>	Region 4: I/O ports at f000 [size=32]
>
>00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06)
>	Subsystem: Dell Device [1028:0447]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 18
>	Region 0: Memory at fbf04000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
>		Address: 00000000  Data: 0000
>	Kernel driver in use: intel ips
>
>01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
>	Subsystem: Dell Device [1028:0447]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 46
>	Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
>	Region 2: Memory at fbe20000 (64-bit, non-prefetchable) [size=128K]
>	Region 4: I/O ports at e000 [size=256]
>	Expansion ROM at fbe00000 [disabled] [size=128K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
>			ClockPM- Surprise- LLActRep- BwNot-
>		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0f00c  Data: 4122
>	Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
>	Kernel driver in use: radeon
>
>01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series] [1002:aa68]
>	Subsystem: Dell Device [1028:0447]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 50
>	Region 0: Memory at fbe40000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
>			ClockPM- Surprise- LLActRep- BwNot-
>		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0f00c  Data: 4182
>	Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
>	Kernel driver in use: snd_hda_intel
>
>12:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
>	Subsystem: Dell Inspiron M5010 / XPS 8300 [1028:0010]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 17
>	Region 0: Memory at fbd00000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [40] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
>	Capabilities: [58] Vendor Specific Information: Len=78 <?>
>	Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [d0] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us
>			ClockPM+ Surprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>	Capabilities: [100 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>	Capabilities: [13c v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>	Capabilities: [160 v1] Device Serial Number 00-00-9d-ff-ff-71-1c-65
>	Capabilities: [16c v1] Power Budgeting <?>
>	Kernel driver in use: bcma-pci-bridge
>
>13:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
>	Subsystem: Dell Device [1028:0447]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 48
>	Region 0: I/O ports at d000 [size=256]
>	Region 2: Memory at d0c10000 (64-bit, prefetchable) [size=4K]
>	Region 4: Memory at d0c00000 (64-bit, prefetchable) [size=64K]
>	Expansion ROM at fb300000 [disabled] [size=128K]
>	Capabilities: [40] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0f00c  Data: 4152
>	Capabilities: [70] Express (v2) Endpoint, MSI 01
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
>			ClockPM+ Surprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
>		Vector table: BAR=4 offset=00000000
>		PBA: BAR=4 offset=00000800
>	Capabilities: [cc] Vital Product Data
>		Unknown small resource type 00, will not decode more.
>	Capabilities: [100 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>	Capabilities: [140 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>	Capabilities: [160 v1] Device Serial Number 02-00-00-00-36-4c-e0-00
>	Kernel driver in use: r8169
>
>ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 05)
>	Subsystem: Intel Corporation Device [8086:8086]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 05)
>	Subsystem: Intel Corporation Device [8086:8086]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 05)
>	Subsystem: Intel Corporation Device [8086:8086]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 05)
>	Subsystem: Intel Corporation Device [8086:8086]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 05)
>	Subsystem: Intel Corporation Device [8086:8086]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 05)
>	Subsystem: Intel Corporation Device [8086:8086]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>

Actions: View

Attachments on bug 983318: 783076 | 783077 | 783078 | 783079 | 818401 | 874489 | 874504