Attachment 888261 Details for Bug 1089748 – File: dmesg

File: dmesg

dmesg (text/plain), 140.39 KB, created by Laurent Jacquot on 2014-04-21 20:53:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Laurent Jacquot

Created: 2014-04-21 20:53:07 UTC

Size: 140.39 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.12.10-300.fc20.i686+PAE (mockbuild@bkernel02) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #1 SMP Thu Feb 6 22:31:13 UTC 2014
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe6ffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000cfe70000-0x00000000cfe87fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000cfe88000-0x00000000cfedbfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000cfedc000-0x00000000cfffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.6 present.
>[    0.000000] DMI: System manufacturer System Product Name/P7P55D LE, BIOS 2003    12/16/2010
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x1000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-D3FFF write-protect
>[    0.000000]   D4000-DFFFF uncachable
>[    0.000000]   E0000-E7FFF write-through
>[    0.000000]   E8000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask E00000000 write-back
>[    0.000000]   1 base 200000000 mask FE0000000 write-back
>[    0.000000]   2 base 220000000 mask FF0000000 write-back
>[    0.000000]   3 base 0D0000000 mask FF0000000 uncachable
>[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
>[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
>[    0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
>[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0x36400000-0x365fffff]
>[    0.000000]  [mem 0x36400000-0x365fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x34000000-0x363fffff]
>[    0.000000]  [mem 0x34000000-0x363fffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x36600000-0x375fdfff]
>[    0.000000]  [mem 0x36600000-0x373fffff] page 2M
>[    0.000000]  [mem 0x37400000-0x375fdfff] page 4k
>[    0.000000] BRK [0x00e76000, 0x00e76fff] PGTABLE
>[    0.000000] BRK [0x00e77000, 0x00e79fff] PGTABLE
>[    0.000000] BRK [0x00e7a000, 0x00e7afff] PGTABLE
>[    0.000000] BRK [0x00e7b000, 0x00e7bfff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x366c4000-0x37359fff]
>[    0.000000] ACPI: RSDP 000fb9f0 00024 (v02 ACPIAM)
>[    0.000000] ACPI: XSDT cfe70100 0005C (v01 121610 XSDT0948 20101216 MSFT 00000097)
>[    0.000000] ACPI: FACP cfe70290 000F4 (v03 121610 FACP0948 20101216 MSFT 00000097)
>[    0.000000] ACPI: DSDT cfe704a0 0DD4A (v01  A1380 A1380001 00000001 INTL 20060113)
>[    0.000000] ACPI: FACS cfe88000 00040
>[    0.000000] ACPI: APIC cfe70390 000CC (v01 121610 APIC0948 20101216 MSFT 00000097)
>[    0.000000] ACPI: MCFG cfe70460 0003C (v01 121610 OEMMCFG  20101216 MSFT 00000097)
>[    0.000000] ACPI: OEMB cfe88040 00072 (v01 121610 OEMB0948 20101216 MSFT 00000097)
>[    0.000000] ACPI: HPET cfe7e1f0 00038 (v01 121610 OEMHPET  20101216 MSFT 00000097)
>[    0.000000] ACPI: OSFR cfe7e230 000B0 (v01 121610 OEMOSFR  20101216 MSFT 00000097)
>[    0.000000] ACPI: SSDT cfe897e0 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 8074MB HIGHMEM available.
>[    0.000000] 885MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 375fe000
>[    0.000000]   low ram: 0 - 375fe000
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   Normal   [mem 0x01000000-0x375fdfff]
>[    0.000000]   HighMem  [mem 0x375fe000-0x2fffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
>[    0.000000]   node   0: [mem 0x00100000-0xcfe6ffff]
>[    0.000000]   node   0: [mem 0x00000000-0x2fffffff]
>[    0.000000] On node 0 totalpages: 2096653
>[    0.000000] free_area_init_node: node 0, pgdat c0c92f80, node_mem_map f20c4020
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1740 pages used for memmap
>[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 16149 pages used for memmap
>[    0.000000]   HighMem zone: 1869938 pages, LIFO batch:31
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
>[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
>[    0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 14 pages/cpu @f750a000 s35584 r0 d21760 u57344
>[    0.000000] pcpu-alloc: s35584 r0 d21760 u57344 alloc=14*4096
>[    0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 
>[    0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2094881
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.12.10-300.fc20.i686+PAE root=/dev/mapper/Sys-root ro vconsole.keymap=fr rd.dm=0 rd.lvm.lv=Sys/root rd.lvm.lv=Sys/Swap rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.md.uuid=ce4842f6:3687e057:7ddb68b4:999f5f41 rhgb quiet LANG=fr_FR.UTF-8
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Initializing CPU#0
>[    0.000000] allocated 18350072 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] Initializing HighMem for node 0 (000375fe:00230000)
>[    0.000000] Memory: 8271556K/8386612K available (5881K kernel code, 581K rwdata, 2408K rodata, 752K init, 1012K bss, 115056K reserved, 7479752K highmem)
>[    0.000000] virtual kernel memory layout:
>    fixmap  : 0xffa95000 - 0xfffff000   (5544 kB)
>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
>      .init : 0xc0cac000 - 0xc0d68000   ( 752 kB)
>      .data : 0xc09beb0d - 0xc0cab500   (2994 kB)
>      .text : 0xc0400000 - 0xc09beb0d   (5882 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=16.
>[    0.000000] NR_IRQS:2304 nr_irqs:808 16
>[    0.000000] CPU 0 irqstacks, hard=f080c000 soft=f080e000
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.001000] tsc: Detected 2942.269 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5884.53 BogoMIPS (lpj=2942269)
>[    0.000004] pid_max: default: 32768 minimum: 301
>[    0.000039] Security Framework initialized
>[    0.000045] SELinux:  Initializing.
>[    0.000053] SELinux:  Starting in permissive mode
>[    0.000091] Mount-cache hash table entries: 512
>[    0.000283] Initializing cgroup subsys memory
>[    0.000292] Initializing cgroup subsys devices
>[    0.000293] Initializing cgroup subsys freezer
>[    0.000295] Initializing cgroup subsys net_cls
>[    0.000297] Initializing cgroup subsys blkio
>[    0.000298] Initializing cgroup subsys perf_event
>[    0.000322] CPU: Physical Processor ID: 0
>[    0.000323] CPU: Processor Core ID: 0
>[    0.000328] mce: CPU supports 9 MCE banks
>[    0.000337] CPU0: Thermal monitoring enabled (TM1)
>[    0.000348] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
>Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
>tlb_flushall_shift: 6
>[    0.000486] Freeing SMP alternatives memory: 24K (c0d68000 - c0d6e000)
>[    0.001267] ACPI: Core revision 20130725
>[    0.005457] ACPI: All ACPI Tables successfully acquired
>[    0.005549] ftrace: allocating 25008 entries in 49 pages
>[    0.015223] Overriding APIC driver with bigsmp
>[    0.015226] Enabling APIC mode:  Physflat.  Using 1 I/O APICs
>[    0.015437] Leaving ESR disabled.
>[    0.015605] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.025606] smpboot: CPU0: Intel(R) Core(TM) i3 CPU         530  @ 2.93GHz (fam: 06, model: 25, stepping: 02)
>[    0.126949] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
>[    0.126955] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
>[    0.126957] ... version:                3
>[    0.126957] ... bit width:              48
>[    0.126958] ... generic registers:      4
>[    0.126959] ... value mask:             0000ffffffffffff
>[    0.126960] ... max period:             000000007fffffff
>[    0.126961] ... fixed-purpose events:   3
>[    0.126962] ... event mask:             000000070000000f
>[    0.128195] CPU 1 irqstacks, hard=f090c000 soft=f090e000
>[    0.138496] Initializing CPU#1
>[    0.139303] Leaving ESR disabled.
>[    0.141588] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.128197] smpboot: Booting Node   0, Processors  #   1
>[    0.141663] CPU 2 irqstacks, hard=f0a62000 soft=f0a64000
>[    0.151984] Initializing CPU#2
>[    0.152770] Leaving ESR disabled.
>[    0.141664]  #   2
>[    0.154989] CPU 3 irqstacks, hard=f0abe000 soft=f0ac0000
>[    0.154992]  #   3 OK
>[    0.165230] Initializing CPU#3
>[    0.166098] Leaving ESR disabled.
>[    0.168236] Brought up 4 CPUs
>[    0.168239] smpboot: Total of 4 processors activated (23538.15 BogoMIPS)
>[    0.170658] devtmpfs: initialized
>[    0.170998] PM: Registering ACPI NVS region [mem 0xcfe88000-0xcfedbfff] (344064 bytes)
>[    0.171817] atomic64 test passed for i586+ platform with CX8 and with SSE
>[    0.171818] pinctrl core: initialized pinctrl subsystem
>[    0.171866] RTC time: 14:03:09, date: 03/30/14
>[    0.171915] NET: Registered protocol family 16
>[    0.172058] cpuidle: using governor menu
>[    0.172166] ACPI: bus type PCI registered
>[    0.172168] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.172216] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.172219] PCI: not using MMCONFIG
>[    0.172254] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
>[    0.172300] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
>[    0.172301] PCI: Using configuration type 1 for base access
>[    0.173203] bio: create slab <bio-0> at 0
>[    0.173325] ACPI: Added _OSI(Module Device)
>[    0.173327] ACPI: Added _OSI(Processor Device)
>[    0.173328] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.173329] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.174207] ACPI: EC: Look up EC in DSDT
>[    0.175137] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.181496] ACPI: SSDT cfe880c0 01238 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
>[    0.181750] ACPI: Dynamic OEM Table Load:
>[    0.181752] ACPI: SSDT   (null) 01238 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
>[    0.181820] ACPI: SSDT cfe89300 004D5 (v01  PmRef  P001Cst 00003001 INTL 20060113)
>[    0.182033] ACPI: Dynamic OEM Table Load:
>[    0.182035] ACPI: SSDT   (null) 004D5 (v01  PmRef  P001Cst 00003001 INTL 20060113)
>[    0.182197] ACPI: Interpreter enabled
>[    0.182210] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
>[    0.182221] ACPI: (supports S0 S1 S3 S4 S5)
>[    0.182222] ACPI: Using IOAPIC for interrupt routing
>[    0.182238] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.183100] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
>[    0.183102] PCI: Using MMCONFIG for extended config space
>[    0.183112] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.183211] ACPI: No dock devices found.
>[    0.189167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.189324] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
>[    0.189472] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
>[    0.189474] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
>[    0.189582] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    0.189740] PCI host bridge to bus 0000:00
>[    0.189742] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.189744] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.189745] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.189748] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.189750] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
>[    0.189751] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
>[    0.189753] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff]
>[    0.189760] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
>[    0.189775] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
>[    0.189859] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
>[    0.189878] pci 0000:00:1a.0: reg 0x10: [mem 0xf7bfe000-0xf7bfe3ff]
>[    0.189956] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.190001] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.190033] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
>[    0.190045] pci 0000:00:1b.0: reg 0x10: [mem 0xf7bf8000-0xf7bfbfff 64bit]
>[    0.190100] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.190163] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
>[    0.190218] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.190260] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.190288] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
>[    0.190338] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[    0.190380] pci 0000:00:1c.4: System wakeup disabled by ACPI
>[    0.190407] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
>[    0.190458] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>[    0.190499] pci 0000:00:1c.5: System wakeup disabled by ACPI
>[    0.190526] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
>[    0.190581] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
>[    0.190621] pci 0000:00:1c.6: System wakeup disabled by ACPI
>[    0.190647] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
>[    0.190702] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
>[    0.190742] pci 0000:00:1c.7: System wakeup disabled by ACPI
>[    0.190774] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
>[    0.190792] pci 0000:00:1d.0: reg 0x10: [mem 0xf7bfd000-0xf7bfd3ff]
>[    0.190866] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.190909] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.190939] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>[    0.191011] pci 0000:00:1e.0: System wakeup disabled by ACPI
>[    0.191043] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
>[    0.191191] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
>[    0.191206] pci 0000:00:1f.2: reg 0x10: [io  0xb880-0xb887]
>[    0.191213] pci 0000:00:1f.2: reg 0x14: [io  0xb800-0xb803]
>[    0.191219] pci 0000:00:1f.2: reg 0x18: [io  0xb480-0xb487]
>[    0.191225] pci 0000:00:1f.2: reg 0x1c: [io  0xb400-0xb403]
>[    0.191232] pci 0000:00:1f.2: reg 0x20: [io  0xb080-0xb09f]
>[    0.191238] pci 0000:00:1f.2: reg 0x24: [mem 0xf7bf7000-0xf7bf77ff]
>[    0.191274] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.191332] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
>[    0.191344] pci 0000:00:1f.3: reg 0x10: [mem 0xf7bfc000-0xf7bfc0ff 64bit]
>[    0.191361] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
>[    0.191476] pci 0000:05:00.0: [1002:6779] type 00 class 0x030000
>[    0.191495] pci 0000:05:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.191509] pci 0000:05:00.0: reg 0x18: [mem 0xf7ec0000-0xf7edffff 64bit]
>[    0.191518] pci 0000:05:00.0: reg 0x20: [io  0xe000-0xe0ff]
>[    0.191536] pci 0000:05:00.0: reg 0x30: [mem 0xf7ea0000-0xf7ebffff pref]
>[    0.191581] pci 0000:05:00.0: supports D1 D2
>[    0.191624] pci 0000:05:00.1: [1002:aa98] type 00 class 0x040300
>[    0.191642] pci 0000:05:00.1: reg 0x10: [mem 0xf7efc000-0xf7efffff 64bit]
>[    0.191727] pci 0000:05:00.1: supports D1 D2
>[    0.192959] pci 0000:00:1c.0: PCI bridge to [bus 05]
>[    0.192967] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
>[    0.192969] pci 0000:00:1c.0:   bridge window [mem 0xf7e00000-0xf7efffff]
>[    0.192974] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.193017] pci 0000:00:1c.4: PCI bridge to [bus 04]
>[    0.193063] pci 0000:00:1c.5: PCI bridge to [bus 03]
>[    0.193140] pci 0000:02:00.0: [197b:2361] type 00 class 0x010601
>[    0.193219] pci 0000:02:00.0: reg 0x24: [mem 0xf7dfa000-0xf7dfbfff]
>[    0.193276] pci 0000:02:00.0: PME# supported from D3hot
>[    0.193327] pci 0000:02:00.1: [197b:2361] type 00 class 0x010185
>[    0.193349] pci 0000:02:00.1: reg 0x10: [io  0xdc00-0xdc07]
>[    0.193361] pci 0000:02:00.1: reg 0x14: [io  0xd880-0xd883]
>[    0.193373] pci 0000:02:00.1: reg 0x18: [io  0xd800-0xd807]
>[    0.193385] pci 0000:02:00.1: reg 0x1c: [io  0xd480-0xd483]
>[    0.193397] pci 0000:02:00.1: reg 0x20: [io  0xd400-0xd40f]
>[    0.193490] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.193499] pci 0000:00:1c.6: PCI bridge to [bus 02]
>[    0.193501] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
>[    0.193504] pci 0000:00:1c.6:   bridge window [mem 0xf7d00000-0xf7dfffff]
>[    0.193564] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
>[    0.193579] pci 0000:01:00.0: reg 0x10: [io  0xc800-0xc8ff]
>[    0.193604] pci 0000:01:00.0: reg 0x18: [mem 0xdffff000-0xdfffffff 64bit pref]
>[    0.193620] pci 0000:01:00.0: reg 0x20: [mem 0xdfff8000-0xdfffbfff 64bit pref]
>[    0.193631] pci 0000:01:00.0: reg 0x30: [mem 0xf7cf0000-0xf7cfffff pref]
>[    0.193687] pci 0000:01:00.0: supports D1 D2
>[    0.193689] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.194958] pci 0000:00:1c.7: PCI bridge to [bus 01]
>[    0.194966] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
>[    0.194969] pci 0000:00:1c.7:   bridge window [mem 0xf7c00000-0xf7cfffff]
>[    0.194973] pci 0000:00:1c.7:   bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
>[    0.195012] pci 0000:06:02.0: [104c:8024] type 00 class 0x0c0010
>[    0.195027] pci 0000:06:02.0: reg 0x10: [mem 0xf7fff800-0xf7ffffff]
>[    0.195036] pci 0000:06:02.0: reg 0x14: [mem 0xf7ff8000-0xf7ffbfff]
>[    0.195095] pci 0000:06:02.0: supports D1 D2
>[    0.195096] pci 0000:06:02.0: PME# supported from D0 D1 D2 D3hot
>[    0.195150] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
>[    0.195155] pci 0000:00:1e.0:   bridge window [mem 0xf7f00000-0xf7ffffff]
>[    0.195159] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.195161] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.195162] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.195164] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
>[    0.195165] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
>[    0.195167] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfed8ffff] (subtractive decode)
>[    0.195195] pci_bus 0000:00: on NUMA node 0
>[    0.195656] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15)
>[    0.195700] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
>[    0.195741] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
>[    0.195785] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)
>[    0.195827] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>[    0.195871] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
>[    0.195915] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
>[    0.195962] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
>[    0.196048] ACPI: Enabled 3 GPEs in block 00 to 3F
>[    0.196053] ACPI: \_SB_.PCI0: notify handler is installed
>[    0.196086] Found 1 acpi root devices
>[    0.196152] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.196154] vgaarb: loaded
>[    0.196155] vgaarb: bridge control possible 0000:05:00.0
>[    0.196218] SCSI subsystem initialized
>[    0.196255] libata version 3.00 loaded.
>[    0.196270] ACPI: bus type USB registered
>[    0.196283] usbcore: registered new interface driver usbfs
>[    0.196289] usbcore: registered new interface driver hub
>[    0.196307] usbcore: registered new device driver usb
>[    0.196367] PCI: Using ACPI for IRQ routing
>[    0.196369] PCI: pci_cache_line_size set to 64 bytes
>[    0.196413] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
>[    0.196414] e820: reserve RAM buffer [mem 0xcfe70000-0xcfffffff]
>[    0.196489] NetLabel: Initializing
>[    0.196490] NetLabel:  domain hash size = 128
>[    0.196491] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.196499] NetLabel:  unlabeled traffic allowed by default
>[    0.196609] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.196613] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.198633] Switched to clocksource hpet
>[    0.203741] pnp: PnP ACPI init
>[    0.203757] ACPI: bus type PNP registered
>[    0.203819] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
>[    0.203822] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.203862] pnp 00:01: [dma 4]
>[    0.203877] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.203907] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.203924] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.203945] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.204089] system 00:05: [io  0x0290-0x029f] has been reserved
>[    0.204091] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.204230] system 00:06: [io  0x04d0-0x04d1] has been reserved
>[    0.204234] system 00:06: [io  0x0800-0x087f] could not be reserved
>[    0.204236] system 00:06: [io  0x0500-0x057f] has been reserved
>[    0.204238] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.204240] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.204241] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
>[    0.204243] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.204306] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.204354] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.204403] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
>[    0.204405] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.204557] pnp 00:0a: [dma 0 disabled]
>[    0.204604] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.204692] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.204694] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.204696] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.204738] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>[    0.204792] pnp 00:0d: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
>[    0.204835] system 00:0e: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.204837] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.204988] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.204991] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
>[    0.204992] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
>[    0.204994] system 00:0f: [mem 0x00100000-0xcfffffff] could not be reserved
>[    0.204996] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved
>[    0.204998] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.205096] pnp: PnP ACPI: found 16 devices
>[    0.205097] ACPI: bus type PNP unregistered
>[    0.241096] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
>[    0.241100] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
>[    0.241102] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
>[    0.241108] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
>[    0.241110] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
>[    0.241112] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
>[    0.241118] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
>[    0.241134] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>[    0.241135] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.241137] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>[    0.241139] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.241140] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.241142] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.241144] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.241147] pci 0000:00:1c.4: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
>[    0.241150] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
>[    0.241152] pci 0000:00:1c.5: BAR 14: assigned [mem 0xd0400000-0xd05fffff]
>[    0.241154] pci 0000:00:1c.5: BAR 15: assigned [mem 0xd0600000-0xd07fffff 64bit pref]
>[    0.241156] pci 0000:00:1c.6: BAR 15: assigned [mem 0xd0800000-0xd09fffff 64bit pref]
>[    0.241158] pci 0000:00:1c.4: BAR 13: assigned [io  0x1000-0x1fff]
>[    0.241160] pci 0000:00:1c.5: BAR 13: assigned [io  0x2000-0x2fff]
>[    0.241163] pci 0000:00:1c.0: PCI bridge to [bus 05]
>[    0.241165] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
>[    0.241169] pci 0000:00:1c.0:   bridge window [mem 0xf7e00000-0xf7efffff]
>[    0.241172] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.241176] pci 0000:00:1c.4: PCI bridge to [bus 04]
>[    0.241178] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
>[    0.241182] pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd01fffff]
>[    0.241185] pci 0000:00:1c.4:   bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
>[    0.241189] pci 0000:00:1c.5: PCI bridge to [bus 03]
>[    0.241191] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
>[    0.241195] pci 0000:00:1c.5:   bridge window [mem 0xd0400000-0xd05fffff]
>[    0.241198] pci 0000:00:1c.5:   bridge window [mem 0xd0600000-0xd07fffff 64bit pref]
>[    0.241202] pci 0000:00:1c.6: PCI bridge to [bus 02]
>[    0.241204] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
>[    0.241208] pci 0000:00:1c.6:   bridge window [mem 0xf7d00000-0xf7dfffff]
>[    0.241211] pci 0000:00:1c.6:   bridge window [mem 0xd0800000-0xd09fffff 64bit pref]
>[    0.241215] pci 0000:00:1c.7: PCI bridge to [bus 01]
>[    0.241217] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
>[    0.241221] pci 0000:00:1c.7:   bridge window [mem 0xf7c00000-0xf7cfffff]
>[    0.241224] pci 0000:00:1c.7:   bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
>[    0.241228] pci 0000:00:1e.0: PCI bridge to [bus 06]
>[    0.241232] pci 0000:00:1e.0:   bridge window [mem 0xf7f00000-0xf7ffffff]
>[    0.241238] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.241240] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.241241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.241243] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
>[    0.241244] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xf7ffffff]
>[    0.241246] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
>[    0.241247] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
>[    0.241249] pci_bus 0000:05: resource 1 [mem 0xf7e00000-0xf7efffff]
>[    0.241250] pci_bus 0000:05: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.241252] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
>[    0.241253] pci_bus 0000:04: resource 1 [mem 0xd0000000-0xd01fffff]
>[    0.241255] pci_bus 0000:04: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
>[    0.241256] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
>[    0.241258] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd05fffff]
>[    0.241259] pci_bus 0000:03: resource 2 [mem 0xd0600000-0xd07fffff 64bit pref]
>[    0.241261] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>[    0.241262] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
>[    0.241264] pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd09fffff 64bit pref]
>[    0.241265] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
>[    0.241267] pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
>[    0.241268] pci_bus 0000:01: resource 2 [mem 0xdff00000-0xdfffffff 64bit pref]
>[    0.241270] pci_bus 0000:06: resource 1 [mem 0xf7f00000-0xf7ffffff]
>[    0.241271] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
>[    0.241273] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
>[    0.241274] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.241276] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
>[    0.241277] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xf7ffffff]
>[    0.241279] pci_bus 0000:06: resource 9 [mem 0xfc000000-0xfed8ffff]
>[    0.241313] NET: Registered protocol family 2
>[    0.241465] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.241502] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.241535] TCP: Hash tables configured (established 8192 bind 8192)
>[    0.241550] TCP: reno registered
>[    0.241552] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.241559] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.241627] NET: Registered protocol family 1
>[    0.279050] pci 0000:05:00.0: Boot video device
>[    0.279062] PCI: CLS 32 bytes, default 64
>[    0.279092] Unpacking initramfs...
>[    0.491018] Freeing initrd memory: 12888K (f66c4000 - f735a000)
>[    0.491501] apm: BIOS not found.
>[    0.491864] Initialise system trusted keyring
>[    0.491906] audit: initializing netlink socket (disabled)
>[    0.491918] type=2000 audit(1396188189.381:1): initialized
>[    0.508352] bounce pool size: 64 pages
>[    0.508360] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.509221] zbud: loaded
>[    0.509279] VFS: Disk quotas dquot_6.5.2
>[    0.509324] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.509650] msgmni has been set to 1571
>[    0.509706] Key type big_key registered
>[    0.509708] SELinux:  Registering netfilter hooks
>[    0.510342] alg: No test for stdrng (krng)
>[    0.510349] NET: Registered protocol family 38
>[    0.510352] Key type asymmetric registered
>[    0.510353] Asymmetric key parser 'x509' registered
>[    0.510382] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    0.510414] io scheduler noop registered
>[    0.510416] io scheduler deadline registered
>[    0.510440] io scheduler cfq registered (default)
>[    0.510657] pcieport 0000:00:1c.4: enabling device (0104 -> 0107)
>[    0.510747] pcieport 0000:00:1c.5: enabling device (0104 -> 0107)
>[    0.511021] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.511033] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.511067] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
>[    0.511068] vesafb: scrolling: redraw
>[    0.511070] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
>[    0.511288] vesafb: framebuffer at 0xe0000000, mapped to 0xf7e80000, using 5824k, total 5824k
>[    0.511359] Console: switching to colour frame buffer device 175x65
>[    0.677892] fb0: VESA VGA frame buffer device
>[    0.677903] intel_idle: MWAIT substates: 0x1120
>[    0.677905] intel_idle: v0.4 model 0x25
>[    0.677906] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.678051] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>[    0.678054] ACPI: Power Button [PWRB]
>[    0.678081] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>[    0.678083] ACPI: Power Button [PWRF]
>[    0.678190] ACPI: Requesting acpi_cpufreq
>[    0.678417] GHES: HEST is not enabled!
>[    0.678462] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.699030] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.699424] Non-volatile memory driver v1.3
>[    0.699426] Linux agpgart interface v0.103
>[    0.699568] ahci 0000:00:1f.2: version 3.0
>[    0.699669] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
>[    0.699702] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    0.710708] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>[    0.710712] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst 
>[    0.710716] ahci 0000:00:1f.2: setting latency timer to 64
>[    0.721071] scsi0 : ahci
>[    0.721145] scsi1 : ahci
>[    0.721208] scsi2 : ahci
>[    0.721268] scsi3 : ahci
>[    0.721323] scsi4 : ahci
>[    0.721375] scsi5 : ahci
>[    0.721406] ata1: SATA max UDMA/133 abar m2048@0xf7bf7000 port 0xf7bf7100 irq 40
>[    0.721408] ata2: SATA max UDMA/133 abar m2048@0xf7bf7000 port 0xf7bf7180 irq 40
>[    0.721410] ata3: SATA max UDMA/133 abar m2048@0xf7bf7000 port 0xf7bf7200 irq 40
>[    0.721412] ata4: SATA max UDMA/133 abar m2048@0xf7bf7000 port 0xf7bf7280 irq 40
>[    0.721413] ata5: SATA max UDMA/133 abar m2048@0xf7bf7000 port 0xf7bf7300 irq 40
>[    0.721415] ata6: SATA max UDMA/133 abar m2048@0xf7bf7000 port 0xf7bf7380 irq 40
>[    0.721429] pcieport 0000:00:1c.6: driver skip pci_set_master, fix it!
>[    0.721475] ahci 0000:02:00.0: JMB361 has only one port
>[    0.721484] ahci 0000:02:00.0: forcing port_map 0x3 -> 0x1
>[    0.731651] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
>[    0.731653] ahci 0000:02:00.0: flags: 64bit ncq led clo pmp pio 
>[    0.731824] scsi6 : ahci
>[    0.731875] scsi7 : ahci
>[    0.731906] ata7: SATA max UDMA/133 abar m8192@0xf7dfa000 port 0xf7dfa100 irq 18
>[    0.731907] ata8: DUMMY
>[    0.731966] libphy: Fixed MDIO Bus: probed
>[    0.732015] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.732017] ehci-pci: EHCI PCI platform driver
>[    0.732098] ehci-pci 0000:00:1a.0: setting latency timer to 64
>[    0.732104] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.732139] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.732151] ehci-pci 0000:00:1a.0: debug port 2
>[    0.736059] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
>[    0.736073] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7bfe000
>[    0.741630] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.741669] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.741671] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.741673] usb usb1: Product: EHCI Host Controller
>[    0.741674] usb usb1: Manufacturer: Linux 3.12.10-300.fc20.i686+PAE ehci_hcd
>[    0.741675] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.741767] hub 1-0:1.0: USB hub found
>[    0.741773] hub 1-0:1.0: 2 ports detected
>[    0.741916] ehci-pci 0000:00:1d.0: setting latency timer to 64
>[    0.741920] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.741951] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.741961] ehci-pci 0000:00:1d.0: debug port 2
>[    0.745911] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
>[    0.745922] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7bfd000
>[    0.751631] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.751700] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.751702] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.751703] usb usb2: Product: EHCI Host Controller
>[    0.751705] usb usb2: Manufacturer: Linux 3.12.10-300.fc20.i686+PAE ehci_hcd
>[    0.751706] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.751831] hub 2-0:1.0: USB hub found
>[    0.751836] hub 2-0:1.0: 2 ports detected
>[    0.751905] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.751907] ohci-pci: OHCI PCI platform driver
>[    0.751913] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.751950] usbcore: registered new interface driver usbserial
>[    0.751955] usbcore: registered new interface driver usbserial_generic
>[    0.751960] usbserial: USB Serial support registered for generic
>[    0.751997] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>[    0.754969] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.754973] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.755064] mousedev: PS/2 mouse device common for all mice
>[    0.755250] rtc_cmos 00:02: RTC can wake from S4
>[    0.755405] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    0.755428] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    0.755479] device-mapper: uevent: version 1.0.3
>[    0.755552] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
>[    0.755759] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.755826] usbcore: registered new interface driver usbhid
>[    0.755827] usbhid: USB HID core driver
>[    0.755853] drop_monitor: Initializing network drop monitor service
>[    0.755929] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    0.755999] TCP: cubic registered
>[    0.756000] Initializing XFRM netlink socket
>[    0.756081] NET: Registered protocol family 10
>[    0.756246] mip6: Mobile IPv6
>[    0.756248] NET: Registered protocol family 17
>[    0.756480] Using IPI No-Shortcut mode
>[    0.756576] Loading compiled-in X.509 certificates
>[    0.759436] Loaded X.509 cert 'Fedora kernel signing key: 7354e9965b5ab3cf60d51616b6378c70ccbded93'
>[    0.759444] registered taskstats version 1
>[    0.759809]   Magic number: 6:234:82
>[    0.759912] rtc_cmos 00:02: setting system clock to 2014-03-30 14:03:09 UTC (1396188189)
>[    0.759950] PM: Hibernation image not present or could not be loaded.
>[    0.775202] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>[    1.038716] ata7: SATA link down (SStatus 0 SControl 300)
>[    1.043800] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.158205] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
>[    1.158211] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.158759] hub 1-1:1.0: USB hub found
>[    1.158941] hub 1-1:1.0: 6 ports detected
>[    1.169156] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 127
>[    1.180715] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.182093] ata1.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
>[    1.182100] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    1.183686] ata1.00: configured for UDMA/133
>[    1.184039] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
>[    1.184222] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>[    1.184227] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.184276] sd 0:0:0:0: [sda] Write Protect is off
>[    1.184279] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.184314] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.260283]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
>[    1.260898] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.261669] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.376199] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
>[    1.376205] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.376746] hub 2-1:1.0: USB hub found
>[    1.376955] hub 2-1:1.0: 8 ports detected
>[    1.492670] tsc: Refined TSC clocksource calibration: 2942.462 MHz
>[    1.643646] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.649522] ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
>[    1.649528] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    1.651826] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
>[    1.655577] ata2.00: configured for UDMA/133
>[    1.655756] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD103SJ  1AJ1 PQ: 0 ANSI: 5
>[    1.655973] sd 1:0:0:0: Attached scsi generic sg1 type 0
>[    1.655980] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>[    1.656073] sd 1:0:0:0: [sdb] Write Protect is off
>[    1.656076] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    1.656090] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.665898] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4
>[    1.724924]  sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 >
>[    1.726271] sd 1:0:0:0: [sdb] Attached SCSI disk
>[    1.770338] usb 2-1.2: New USB device found, idVendor=051d, idProduct=0002
>[    1.770344] usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    1.770348] usb 2-1.2: Product: Back-UPS ES 700 FW:829.D2.I USB FW:D2
>[    1.770352] usb 2-1.2: Manufacturer: APC
>[    1.770355] usb 2-1.2: SerialNumber: 5B0703U16571  
>[    2.051227] hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 700 FW:829.D2.I USB FW:D2] on usb-0000:00:1d.0-1.2/input0
>[    2.115686] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.121607] ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
>[    2.121614] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    2.124843] usb 2-1.3: new high-speed USB device number 4 using ehci-pci
>[    2.127613] ata3.00: configured for UDMA/133
>[    2.127812] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD103SJ  1AJ1 PQ: 0 ANSI: 5
>[    2.127943] sd 2:0:0:0: Attached scsi generic sg2 type 0
>[    2.127984] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>[    2.128066] sd 2:0:0:0: [sdc] Write Protect is off
>[    2.128068] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    2.128080] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.210450] usb 2-1.3: New USB device found, idVendor=1a40, idProduct=0101
>[    2.210457] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    2.210461] usb 2-1.3: Product: USB 2.0 Hub [MTT]
>[    2.210860] hub 2-1.3:1.0: USB hub found
>[    2.211077] hub 2-1.3:1.0: 4 ports detected
>[    2.220283]  sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 sdc8 sdc9 >
>[    2.221662] sd 2:0:0:0: [sdc] Attached SCSI disk
>[    2.284829] usb 2-1.5: new high-speed USB device number 5 using ehci-pci
>[    2.492990] Switched to clocksource tsc
>[    2.519460] usb 2-1.5: New USB device found, idVendor=046d, idProduct=08ce
>[    2.519466] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=2
>[    2.519470] usb 2-1.5: SerialNumber: 2054FF92
>[    2.581897] usb 2-1.3.3: new full-speed USB device number 6 using ehci-pci
>[    2.587683] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.589014] ata4.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
>[    2.589020] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    2.590555] ata4.00: configured for UDMA/133
>[    2.590850] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
>[    2.591023] sd 3:0:0:0: Attached scsi generic sg3 type 0
>[    2.591028] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>[    2.591107] sd 3:0:0:0: [sdd] Write Protect is off
>[    2.591115] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>[    2.591143] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.660556] usb 2-1.3.3: New USB device found, idVendor=050d, idProduct=0121
>[    2.660563] usb 2-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.660567] usb 2-1.3.3: Product: BELKIN BLUETOOTH USB ADAPTER CL. 1
>[    2.660570] usb 2-1.3.3: Manufacturer: Broadcom Corp
>[    2.675139]  sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 sdd7 sdd8 sdd9 >
>[    2.676355] sd 3:0:0:0: [sdd] Attached SCSI disk
>[    2.722824] usb 2-1.3.4: new high-speed USB device number 7 using ehci-pci
>[    2.799709] usb 2-1.3.4: New USB device found, idVendor=058f, idProduct=6362
>[    2.799716] usb 2-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.799720] usb 2-1.3.4: Product: Mass Storage Device
>[    2.799723] usb 2-1.3.4: Manufacturer: Generic
>[    2.799726] usb 2-1.3.4: SerialNumber: 058F312D81B
>[    3.050681] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    3.057311] ata5.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
>[    3.057317] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    3.064066] ata5.00: configured for UDMA/133
>[    3.064265] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
>[    3.064375] sd 4:0:0:0: Attached scsi generic sg4 type 0
>[    3.064437] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>[    3.064521] sd 4:0:0:0: [sde] Write Protect is off
>[    3.064523] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
>[    3.064536] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.070646]  sde: sde1 sde2
>[    3.071173] sd 4:0:0:0: [sde] Attached SCSI disk
>[    3.523653] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    3.564496] ata6.00: ATA-7: ST3400633AS, 3.AAH, max UDMA/133
>[    3.564502] ata6.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32)
>[    3.622804] ata6.00: configured for UDMA/133
>[    3.623136] scsi 5:0:0:0: Direct-Access     ATA      ST3400633AS      3.AA PQ: 0 ANSI: 5
>[    3.623362] sd 5:0:0:0: [sdf] 781422768 512-byte logical blocks: (400 GB/372 GiB)
>[    3.623364] sd 5:0:0:0: Attached scsi generic sg5 type 0
>[    3.623428] sd 5:0:0:0: [sdf] Write Protect is off
>[    3.623431] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
>[    3.623449] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.662484]  sdf: sdf1 sdf2
>[    3.662966] sd 5:0:0:0: [sdf] Attached SCSI disk
>[    3.663307] Freeing unused kernel memory: 752K (c0cac000 - c0d68000)
>[    3.663403] Write protecting the kernel text: 5884k
>[    3.663417] Write protecting the kernel read-only data: 2412k
>[    3.663421] NX-protecting the kernel data: 4356k
>[    3.666457] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    3.666610] systemd[1]: Running in initial RAM disk.
>[    3.666657] systemd[1]: Set hostname to <jack>.
>[    3.671171] systemd[1]: Expecting device dev-disk-by\x2duuid-9dad6733\x2de27c\x2d40d7\x2d938f\x2dbe7e4c10e052.device...
>[    3.671182] systemd[1]: Expecting device dev-mapper-Sys\x2dSwap.device...
>[    3.671190] systemd[1]: Expecting device dev-mapper-Sys\x2droot.device...
>[    3.671197] systemd[1]: Starting -.slice.
>[    3.671309] systemd[1]: Created slice -.slice.
>[    3.671320] systemd[1]: Starting System Slice.
>[    3.671373] systemd[1]: Created slice System Slice.
>[    3.671381] systemd[1]: Starting Slices.
>[    3.671388] systemd[1]: Reached target Slices.
>[    3.671394] systemd[1]: Starting Timers.
>[    3.671401] systemd[1]: Reached target Timers.
>[    3.671409] systemd[1]: Starting Journal Socket.
>[    3.671452] systemd[1]: Listening on Journal Socket.
>[    3.671600] systemd[1]: Starting dracut cmdline hook...
>[    3.671939] systemd[1]: Started Load Kernel Modules.
>[    3.671955] systemd[1]: Starting Setup Virtual Console...
>[    3.672175] systemd[1]: Starting Journal Service...
>[    3.672424] systemd[1]: Started Journal Service.
>[    3.678519] systemd-journald[81]: Vacuuming done, freed 0 bytes
>[    3.833003] systemd-udevd[221]: starting version 208
>[    3.918269] pata_jmicron 0000:02:00.1: setting latency timer to 64
>[    3.927568] [drm] Initialized drm 1.1.0 20060810
>[    3.931403] scsi8 : pata_jmicron
>[    3.932312] usb-storage 2-1.3.4:1.0: USB Mass Storage device detected
>[    3.935944] scsi9 : pata_jmicron
>[    3.936002] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
>[    3.936005] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
>[    3.936046] scsi10 : usb-storage 2-1.3.4:1.0
>[    3.936101] usbcore: registered new interface driver usb-storage
>[    3.944053] pci 0000:00:1e.0: setting latency timer to 64
>[    3.969431] [drm] radeon kernel modesetting enabled.
>[    3.969468] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
>[    3.969469] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
>[    3.969485] Console: switching to colour dummy device 80x25
>[    3.969583] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
>[    3.969784] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xE199).
>[    3.969803] [drm] register mmio base: 0xF7EC0000
>[    3.969805] [drm] register mmio size: 131072
>[    3.969856] ATOM BIOS: AMD
>[    3.970340] radeon 0000:05:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
>[    3.970342] radeon 0000:05:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
>[    3.970343] [drm] Detected VRAM RAM=2048M, BAR=256M
>[    3.970344] [drm] RAM width 64bits DDR
>[    3.970387] [TTM] Zone  kernel: Available graphics memory: 402734 kiB
>[    3.970388] [TTM] Zone highmem: Available graphics memory: 4142610 kiB
>[    3.970389] [TTM] Initializing pool allocator
>[    3.970393] [TTM] Initializing DMA pool allocator
>[    3.970407] [drm] radeon: 2048M of VRAM memory ready
>[    3.970408] [drm] radeon: 1024M of GTT memory ready.
>[    3.970641] [drm] GART: num cpu pages 262144, num gpu pages 262144
>[    3.989408] [drm] Loading CAICOS Microcode
>[    3.992919] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
>[    3.993043] radeon 0000:05:00.0: WB enabled
>[    3.993046] radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xff6c9c00
>[    3.993048] radeon 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xff6c9c0c
>[    3.996636] firewire_ohci 0000:06:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
>[    3.996756] radeon 0000:05:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8832118
>[    3.996759] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    3.996760] [drm] Driver supports precise vblank timestamp query.
>[    3.996790] radeon 0000:05:00.0: irq 41 for MSI/MSI-X
>[    3.996803] radeon 0000:05:00.0: radeon: using MSI.
>[    3.996844] [drm] radeon: irq initialized.
>[    4.013497] [drm] ring test on 0 succeeded in 2 usecs
>[    4.013563] [drm] ring test on 3 succeeded in 1 usecs
>[    4.090220] ata9.01: ATAPI: PIONEER DVD-RW  DVR-109, 1.17, max UDMA/66
>[    4.096264] ata9.01: configured for UDMA/66
>[    4.109435] scsi 8:0:1:0: CD-ROM            PIONEER  DVD-RW  DVR-109  1.17 PQ: 0 ANSI: 5
>[    4.113621] md: bind<sdc2>
>[    4.120617] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>[    4.120620] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    4.120717] sr 8:0:1:0: Attached scsi CD-ROM sr0
>[    4.120784] sr 8:0:1:0: Attached scsi generic sg6 type 5
>[    4.200699] [drm] ring test on 5 succeeded in 2 usecs
>[    4.200709] [drm] UVD initialized successfully.
>[    4.200835] [drm] Enabling audio 0 support
>[    4.200903] [drm] ib test on ring 0 succeeded in 0 usecs
>[    4.200965] [drm] ib test on ring 3 succeeded in 0 usecs
>[    4.353933] [drm] ib test on ring 5 succeeded
>[    4.354163] [drm] Radeon Display Connectors
>[    4.354164] [drm] Connector 0:
>[    4.354166] [drm]   HDMI-A-1
>[    4.354166] [drm]   HPD1
>[    4.354168] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[    4.354169] [drm]   Encoders:
>[    4.354170] [drm]     DFP1: INTERNAL_UNIPHY1
>[    4.354171] [drm] Connector 1:
>[    4.354172] [drm]   DVI-D-1
>[    4.354172] [drm]   HPD4
>[    4.354174] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
>[    4.354174] [drm]   Encoders:
>[    4.354175] [drm]     DFP2: INTERNAL_UNIPHY
>[    4.354176] [drm] Connector 2:
>[    4.354177] [drm]   VGA-1
>[    4.354178] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
>[    4.354179] [drm]   Encoders:
>[    4.354180] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[    4.354283] [drm] Internal thermal controller without fan control
>[    4.355213] [drm] radeon: power management initialized
>[    4.438588] [drm] fb mappable at 0xE0474000
>[    4.438591] [drm] vram apper at 0xE0000000
>[    4.438593] [drm] size 8294400
>[    4.438593] [drm] fb depth is 24
>[    4.438594] [drm]    pitch is 7680
>[    4.438652] fbcon: radeondrmfb (fb0) is primary device
>[    4.467242] md: bind<sda2>
>[    4.468795] md: bind<sdb2>
>[    4.497627] firewire_core 0000:06:02.0: created device fw0: GUID 00308d0120c0958d, S400
>[    4.502021] md: bind<sdd2>
>[    4.525580] raid6: mmxx1     3804 MB/s
>[    4.542561] raid6: mmxx2     4574 MB/s
>[    4.559597] raid6: sse1x1    3453 MB/s
>[    4.576590] raid6: sse1x2    4078 MB/s
>[    4.593573] raid6: sse2x1    6832 MB/s
>[    4.610569] raid6: sse2x2    7976 MB/s
>[    4.610569] raid6: using algorithm sse2x2 (7976 MB/s)
>[    4.610570] raid6: using ssse3x1 recovery algorithm
>[    4.613524] async_tx: api initialized (async)
>[    4.616632] xor: measuring software checksum speed
>[    4.626535]    pIII_sse  : 10980.000 MB/sec
>[    4.636534]    prefetch64-sse: 12516.000 MB/sec
>[    4.636535] xor: using function: prefetch64-sse (12516.000 MB/sec)
>[    4.652159] md: raid6 personality registered for level 6
>[    4.652160] md: raid5 personality registered for level 5
>[    4.652161] md: raid4 personality registered for level 4
>[    4.652311] md/raid:md0: device sdd2 operational as raid disk 3
>[    4.652312] md/raid:md0: device sdb2 operational as raid disk 1
>[    4.652313] md/raid:md0: device sda2 operational as raid disk 0
>[    4.652314] md/raid:md0: device sdc2 operational as raid disk 2
>[    4.652654] md/raid:md0: allocated 4253kB
>[    4.652729] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2
>[    4.652730] RAID conf printout:
>[    4.652730]  --- level:5 rd:4 wd:4
>[    4.652731]  disk 0, o:1, dev:sda2
>[    4.652732]  disk 1, o:1, dev:sdb2
>[    4.652732]  disk 2, o:1, dev:sdc2
>[    4.652733]  disk 3, o:1, dev:sdd2
>[    4.652901] created bitmap (1 pages) for device md0
>[    4.653070] md0: bitmap initialized from disk: read 1 pages, set 0 of 448 bits
>[    4.678681] Console: switching to colour frame buffer device 210x65
>[    4.679803] md0: detected capacity change from 0 to 90189594624
>[    4.688520]  md0: unknown partition table
>[    4.690521] radeon 0000:05:00.0: fb0: radeondrmfb frame buffer device
>[    4.690522] radeon 0000:05:00.0: registered panic notifier
>[    4.690527] [drm] Initialized radeon 2.34.0 20080528 for 0000:05:00.0 on minor 0
>[    4.937700] scsi 10:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[    4.938413] scsi 10:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[    4.939171] scsi 10:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[    4.939933] scsi 10:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[    4.940322] sd 10:0:0:0: Attached scsi generic sg7 type 0
>[    4.940507] sd 10:0:0:1: Attached scsi generic sg8 type 0
>[    4.941007] sd 10:0:0:2: Attached scsi generic sg9 type 0
>[    4.941169] sd 10:0:0:3: Attached scsi generic sg10 type 0
>[    4.957797] sd 10:0:0:0: [sdg] Attached SCSI removable disk
>[    4.958437] sd 10:0:0:1: [sdh] Attached SCSI removable disk
>[    4.959196] sd 10:0:0:2: [sdi] Attached SCSI removable disk
>[    4.959963] sd 10:0:0:3: [sdj] Attached SCSI removable disk
>[    5.168676] bio: create slab <bio-1> at 1
>[    5.324784] PM: Starting manual resume from disk
>[    5.324789] PM: Hibernation image partition 253:0 present
>[    5.324791] PM: Looking for hibernation image.
>[    5.324955] PM: Image not found (code -22)
>[    5.324958] PM: Hibernation image not present or could not be loaded.
>[    5.357849] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    5.535332] systemd-journald[81]: Received SIGTERM
>[    6.127342] type=1404 audit(1396188194.867:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>[    6.346342] SELinux: 2048 avtab hash slots, 98443 rules.
>[    6.362341] SELinux: 2048 avtab hash slots, 98443 rules.
>[    6.382354] SELinux:  8 users, 85 roles, 4781 types, 277 bools, 1 sens, 1024 cats
>[    6.382358] SELinux:  83 classes, 98443 rules
>[    6.387895] SELinux:  Completing initialization.
>[    6.387897] SELinux:  Setting up existing superblocks.
>[    6.387903] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    6.387907] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>[    6.387915] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>[    6.387919] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[    6.387926] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.387969] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>[    6.389095] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>[    6.389592] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>[    6.389595] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>[    6.389599] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>[    6.389601] SELinux: initialized (dev aio, type aio), not configured for labeling
>[    6.389604] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>[    6.389620] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    6.389626] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[    6.389632] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>[    6.389640] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    6.389936] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>[    6.389938] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.389945] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.390041] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.390069] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.390076] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
>[    6.390077] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.390081] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.390085] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.390091] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.390094] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.390096] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.390099] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.390104] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.390113] SELinux: initialized (dev dm-1, type ext4), uses xattr
>[    6.405924] type=1403 audit(1396188195.145:3): policy loaded auid=4294967295 ses=4294967295
>[    6.410075] systemd[1]: Successfully loaded SELinux policy in 314.134ms.
>[    6.567659] systemd[1]: Relabelled /dev and /run in 23.802ms.
>[    7.802428] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[    8.013017] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    8.013055] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    8.013610] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
>[    8.091494] systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 629 (systemd-binfmt)
>[    8.237322] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>[    8.416367] systemd-udevd[651]: starting version 208
>[    8.961048] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \SMRG 1 (20130725/utaddress-251)
>[    8.961057] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    8.977580] EXT4-fs (dm-1): re-mounted. Opts: (null)
>[    9.081951] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMRG 1 (20130725/utaddress-251)
>[    9.081958] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    9.081961] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \GPS1 1 (20130725/utaddress-251)
>[    9.081964] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    9.081965] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPS1 1 (20130725/utaddress-251)
>[    9.081967] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPS0 2 (20130725/utaddress-251)
>[    9.081969] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    9.081970] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPS1 1 (20130725/utaddress-251)
>[    9.081972] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPS0 2 (20130725/utaddress-251)
>[    9.081975] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    9.081975] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    9.103112] media: Linux media interface: v0.10
>[    9.139374] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    9.139384] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
>[    9.139389] pcieport 0000:00:1c.7: driver skip pci_set_master, fix it!
>[    9.139601] r8169 0000:01:00.0: irq 42 for MSI/MSI-X
>[    9.139794] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf80a0000, 48:5b:39:c6:13:d3, XID 083000c0 IRQ 42
>[    9.139797] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[    9.185536] Bluetooth: Core ver 2.16
>[    9.185555] NET: Registered protocol family 31
>[    9.185557] Bluetooth: HCI device and connection manager initialized
>[    9.185564] Bluetooth: HCI socket layer initialized
>[    9.185567] Bluetooth: L2CAP socket layer initialized
>[    9.185573] Bluetooth: SCO socket layer initialized
>[    9.275324] md: bind<sde1>
>[    9.283203] md: bind<sdf1>
>[    9.298092] usbcore: registered new interface driver btusb
>[    9.313475] Linux video capture interface: v2.00
>[    9.458727] microcode: CPU0 sig=0x20652, pf=0x2, revision=0xc
>[    9.542793] md: bind<sdd1>
>[    9.594041] microcode: CPU0 sig=0x20652, pf=0x2, revision=0xc
>[    9.594332] microcode: CPU0 updated to revision 0xe, date = 2013-06-26
>[    9.594369] microcode: CPU1 sig=0x20652, pf=0x2, revision=0xc
>[    9.594394] microcode: CPU1 sig=0x20652, pf=0x2, revision=0xc
>[    9.594624] microcode: CPU1 updated to revision 0xe, date = 2013-06-26
>[    9.594630] microcode: CPU2 sig=0x20652, pf=0x2, revision=0xc
>[    9.594651] microcode: CPU2 sig=0x20652, pf=0x2, revision=0xc
>[    9.594895] microcode: CPU2 updated to revision 0xe, date = 2013-06-26
>[    9.594902] microcode: CPU3 sig=0x20652, pf=0x2, revision=0xc
>[    9.594923] microcode: CPU3 sig=0x20652, pf=0x2, revision=0xc
>[    9.595168] microcode: CPU3 updated to revision 0xe, date = 2013-06-26
>[    9.595215] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    9.656883] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
>[    9.712227] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
>[    9.714867] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
>[    9.714871] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    9.714874] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
>[    9.714876] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[    9.714878] ALSA sound/pci/hda/hda_auto_parser.c:405    dig-out=0x2d/0x2e
>[    9.714880] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[    9.714882] ALSA sound/pci/hda/hda_auto_parser.c:410      Front Mic=0x29
>[    9.714884] ALSA sound/pci/hda/hda_auto_parser.c:410      Rear Mic=0x2b
>[    9.714886] ALSA sound/pci/hda/hda_auto_parser.c:410      Line=0x2a
>[    9.714888] ALSA sound/pci/hda/hda_auto_parser.c:410      CD=0x2c
>[    9.725692] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>[    9.725840] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>[    9.725895] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>[    9.725947] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>[    9.725999] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>[    9.726052] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>[    9.726109] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
>[    9.726164] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
>[    9.726713] ALSA sound/pci/hda/hda_intel.c:3170 0000:05:00.1: Handle VGA-switcheroo audio client
>[    9.726716] ALSA sound/pci/hda/hda_intel.c:3374 0000:05:00.1: Using LPIB position fix
>[    9.726762] snd_hda_intel 0000:05:00.1: irq 44 for MSI/MSI-X
>[    9.728685] ALSA sound/pci/hda/hda_intel.c:1796 0000:05:00.1: Enable sync_write for stable communication
>[    9.839336] ALSA sound/usb/mixer.c:1303 usb_audio: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
>[    9.839342] ALSA sound/usb/mixer.c:1307 usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
>[    9.839545] usbcore: registered new interface driver snd-usb-audio
>[    9.935736] md: bind<sdb6>
>[    9.949181] uvcvideo: Found UVC 1.00 device <unnamed> (046d:08ce)
>[    9.968560] input: UVC Camera (046d:08ce) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input13
>[    9.968655] usbcore: registered new interface driver uvcvideo
>[    9.968656] USB Video Class driver (1.1.1)
>[    9.972720] md: bind<sdb1>
>[    9.984873] md: bind<sdb9>
>[    9.987561] md: bind<sdb8>
>[    9.988611] md: bind<sdb5>
>[    9.989690] md: bind<sdb7>
>[   10.011304] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[   10.011313] SELinux: initialized (dev sda1, type ext4), uses xattr
>[   10.082176] md: bind<sdd5>
>[   10.091601] ALSA sound/pci/hda/hda_eld.c:334 HDMI: ELD buf size is 0, force 128
>[   10.091616] ALSA sound/pci/hda/hda_eld.c:351 HDMI: invalid ELD data byte 0
>[   10.091681] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:05:00.1/sound/card1/input14
>[   10.136722] md: bind<sda9>
>[   10.149196] md: bind<sda8>
>[   10.278611] md: bind<sda6>
>[   10.323481] md: bind<sda7>
>[   10.338348] iTCO_vendor_support: vendor-support=0
>[   10.340496] systemd-udevd[654]: renamed network interface eth0 to p135p1
>[   10.341984] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[   10.342017] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
>[   10.342258] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   10.346558] md: bind<sda5>
>[   10.562477] Adding 4095996k swap on /dev/mapper/Sys-Swap.  Priority:-1 extents:1 across:4095996k FS
>[   10.615419] md: bind<sdc8>
>[   10.657279] md: bind<sdd7>
>[   10.720907] md: bind<sdd8>
>[   10.736165] md/raid:md4: device sdd8 operational as raid disk 3
>[   10.736168] md/raid:md4: device sdc8 operational as raid disk 2
>[   10.736169] md/raid:md4: device sda8 operational as raid disk 0
>[   10.736170] md/raid:md4: device sdb8 operational as raid disk 1
>[   10.736449] md/raid:md4: allocated 4253kB
>[   10.736477] md/raid:md4: raid level 5 active with 4 out of 4 devices, algorithm 2
>[   10.736480] RAID conf printout:
>[   10.736481]  --- level:5 rd:4 wd:4
>[   10.736483]  disk 0, o:1, dev:sda8
>[   10.736484]  disk 1, o:1, dev:sdb8
>[   10.736485]  disk 2, o:1, dev:sdc8
>[   10.736486]  disk 3, o:1, dev:sdd8
>[   10.736655] created bitmap (2 pages) for device md4
>[   10.736948] md4: bitmap initialized from disk: read 1 pages, set 0 of 3200 bits
>[   10.777260] md4: detected capacity change from 0 to 644240375808
>[   10.817624] md: bind<sdc9>
>[   10.821918]  md4: unknown partition table
>[   10.886936] md: bind<sdc7>
>[   10.972873] md/raid:md3: device sdc7 operational as raid disk 2
>[   10.972877] md/raid:md3: device sdd7 operational as raid disk 3
>[   10.972879] md/raid:md3: device sda7 operational as raid disk 0
>[   10.972880] md/raid:md3: device sdb7 operational as raid disk 1
>[   10.973131] md/raid:md3: allocated 4253kB
>[   10.973147] md/raid:md3: raid level 5 active with 4 out of 4 devices, algorithm 2
>[   10.973149] RAID conf printout:
>[   10.973150]  --- level:5 rd:4 wd:4
>[   10.973151]  disk 0, o:1, dev:sda7
>[   10.973152]  disk 1, o:1, dev:sdb7
>[   10.973153]  disk 2, o:1, dev:sdc7
>[   10.973154]  disk 3, o:1, dev:sdd7
>[   10.973245] created bitmap (2 pages) for device md3
>[   10.973379] md3: bitmap initialized from disk: read 1 pages, set 0 of 3200 bits
>[   11.021093] md3: detected capacity change from 0 to 644240375808
>[   11.032000]  md3: unknown partition table
>[   11.059616] md: bind<sdc6>
>[   11.089191] md: bind<sdd6>
>[   11.107472] md/raid:md2: device sdd6 operational as raid disk 3
>[   11.107474] md/raid:md2: device sdc6 operational as raid disk 2
>[   11.107475] md/raid:md2: device sda6 operational as raid disk 0
>[   11.107476] md/raid:md2: device sdb6 operational as raid disk 1
>[   11.107727] md/raid:md2: allocated 4253kB
>[   11.107768] md/raid:md2: raid level 5 active with 4 out of 4 devices, algorithm 2
>[   11.107770] RAID conf printout:
>[   11.107770]  --- level:5 rd:4 wd:4
>[   11.107772]  disk 0, o:1, dev:sda6
>[   11.107773]  disk 1, o:1, dev:sdb6
>[   11.107774]  disk 2, o:1, dev:sdc6
>[   11.107775]  disk 3, o:1, dev:sdd6
>[   11.120414] created bitmap (2 pages) for device md2
>[   11.120668] md2: bitmap initialized from disk: read 1 pages, set 0 of 3200 bits
>[   11.208707] md2: detected capacity change from 0 to 644240375808
>[   11.211221]  md2: unknown partition table
>[   11.219185] md: bind<sdc1>
>[   11.314842] md: raid1 personality registered for level 1
>[   11.315053] md/raid1:md6: active with 5 out of 5 mirrors
>[   11.315071] md6: detected capacity change from 0 to 2146369536
>[   11.322563]  md6: unknown partition table
>[   11.345153] md: bind<sdc5>
>[   11.406279] md/raid:md1: device sdc5 operational as raid disk 2
>[   11.406282] md/raid:md1: device sda5 operational as raid disk 0
>[   11.406283] md/raid:md1: device sdd5 operational as raid disk 3
>[   11.406285] md/raid:md1: device sdb5 operational as raid disk 1
>[   11.406557] md/raid:md1: allocated 4253kB
>[   11.406576] md/raid:md1: raid level 5 active with 4 out of 4 devices, algorithm 2
>[   11.406578] RAID conf printout:
>[   11.406579]  --- level:5 rd:4 wd:4
>[   11.406580]  disk 0, o:1, dev:sda5
>[   11.406582]  disk 1, o:1, dev:sdb5
>[   11.406583]  disk 2, o:1, dev:sdc5
>[   11.406584]  disk 3, o:1, dev:sdd5
>[   11.416371] created bitmap (2 pages) for device md1
>[   11.439728] md1: bitmap initialized from disk: read 1 pages, set 0 of 2720 bits
>[   11.480934] md1: detected capacity change from 0 to 547603611648
>[   11.510708]  md1: unknown partition table
>[   11.536018] md: bind<sdd9>
>[   11.553062] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
>[   11.553071] SELinux: initialized (dev dm-2, type ext4), uses xattr
>[   11.632685] md/raid:md5: device sdd9 operational as raid disk 3
>[   11.632688] md/raid:md5: device sdc9 operational as raid disk 2
>[   11.632689] md/raid:md5: device sda9 operational as raid disk 0
>[   11.632690] md/raid:md5: device sdb9 operational as raid disk 1
>[   11.632957] md/raid:md5: allocated 4253kB
>[   11.632972] md/raid:md5: raid level 5 active with 4 out of 4 devices, algorithm 2
>[   11.632974] RAID conf printout:
>[   11.632976]  --- level:5 rd:4 wd:4
>[   11.632977]  disk 0, o:1, dev:sda9
>[   11.632978]  disk 1, o:1, dev:sdb9
>[   11.632979]  disk 2, o:1, dev:sdc9
>[   11.632980]  disk 3, o:1, dev:sdd9
>[   11.633124] created bitmap (2 pages) for device md5
>[   11.633326] md5: bitmap initialized from disk: read 1 pages, set 0 of 2105 bits
>[   11.677722] md5: detected capacity change from 0 to 423611596800
>[   11.791622]  md5: unknown partition table
>[   12.570178] EXT4-fs (md6): mounted filesystem with ordered data mode. Opts: (null)
>[   12.570187] SELinux: initialized (dev md6, type ext4), uses xattr
>[   18.699051] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
>[   18.699060] SELinux: initialized (dev dm-4, type ext4), uses xattr
>[   19.934664] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
>[   19.934673] SELinux: initialized (dev dm-5, type ext4), uses xattr
>[   21.166592] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null)
>[   21.166603] SELinux: initialized (dev dm-10, type ext4), uses xattr
>[   21.168791] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
>[   21.168796] SELinux: initialized (dev dm-7, type ext4), uses xattr
>[   21.169491] EXT4-fs (dm-12): mounted filesystem with ordered data mode. Opts: (null)
>[   21.169500] SELinux: initialized (dev dm-12, type ext4), uses xattr
>[   21.171154] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
>[   21.171164] SELinux: initialized (dev dm-6, type ext4), uses xattr
>[   21.779183] EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: (null)
>[   21.779193] SELinux: initialized (dev dm-11, type ext4), uses xattr
>[   22.427031] EXT4-fs (dm-14): mounted filesystem with ordered data mode. Opts: (null)
>[   22.427041] SELinux: initialized (dev dm-14, type ext4), uses xattr
>[   22.430716] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
>[   22.430721] SELinux: initialized (dev dm-9, type ext4), uses xattr
>[   23.031852] EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: (null)
>[   23.031867] SELinux: initialized (dev dm-13, type ext4), uses xattr
>[   24.416174] type=1305 audit(1396188213.156:4): audit_pid=1167 old=0 auid=4294967295 ses=4294967295
> subj=system_u:system_r:auditd_t:s0 res=1
>[   24.733664] cfg80211: Calling CRDA to update world regulatory domain
>[   24.735680] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   24.735683] Bluetooth: BNEP filters: protocol multicast
>[   24.735692] Bluetooth: BNEP socket layer initialized
>[   24.871326] cfg80211: World regulatory domain updated:
>[   24.871329] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   24.871331] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   24.871332] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   24.871333] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[   24.871334] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[   24.871335] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[   24.871336] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[   24.976424] r8169 0000:01:00.0 p135p1: link down
>[   24.976433] r8169 0000:01:00.0 p135p1: link down
>[   24.976471] IPv6: ADDRCONF(NETDEV_UP): p135p1: link is not ready
>[   27.531947] r8169 0000:01:00.0 p135p1: link up
>[   27.531962] IPv6: ADDRCONF(NETDEV_CHANGE): p135p1: link becomes ready
>[   32.617011] Ebtables v2.0 registered
>[   32.676855] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   33.420734] Bridge firewalling registered
>[   33.438640] tun: Universal TUN/TAP device driver, 1.6
>[   33.438644] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[   33.462775] device virbr1-nic entered promiscuous mode
>[   33.810546] virbr1: port 1(virbr1-nic) entered listening state
>[   33.810558] virbr1: port 1(virbr1-nic) entered listening state
>[   33.810613] IPv6: ADDRCONF(NETDEV_UP): virbr1: link is not ready
>[   33.817051] virbr1: port 1(virbr1-nic) entered disabled state
>[   34.502281] device virbr0-nic entered promiscuous mode
>[   34.618892] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   35.186266] virbr0: port 1(virbr0-nic) entered listening state
>[   35.186277] virbr0: port 1(virbr0-nic) entered listening state
>[   35.186417] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
>[   35.385329] virbr0: port 1(virbr0-nic) entered disabled state
>[   35.708979] device p135p1 entered promiscuous mode
>[   36.139575] device vnet0 entered promiscuous mode
>[   36.144272] virbr1: port 2(vnet0) entered listening state
>[   36.144279] virbr1: port 2(vnet0) entered listening state
>[   36.699565] systemd-journald[632]: Received request to flush runtime journal from PID 1
>[   38.114033] systemd[1]: Received SIGRTMIN+21 from PID 285 (plymouthd).
>[   38.148008] virbr1: port 2(vnet0) entered learning state
>[   40.151994] virbr1: topology change detected, propagating
>[   40.152002] virbr1: port 2(vnet0) entered forwarding state
>[   40.152536] IPv6: ADDRCONF(NETDEV_CHANGE): virbr1: link becomes ready
>[   53.920569] fuse init (API version 7.22)
>[   53.934102] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>[   53.948362] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[   65.901385] Bluetooth: RFCOMM TTY layer initialized
>[   65.901398] Bluetooth: RFCOMM socket layer initialized
>[   65.901400] Bluetooth: RFCOMM ver 1.11
>[ 1493.712751] perf samples too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
>[10307.188469] perf samples too long (5218 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
>[13057.171026] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.181778] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.189744] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.198035] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.206148] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.214151] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.222154] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.230147] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.238141] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.246153] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.254151] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.262150] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.270384] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.278370] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.286400] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.294650] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.302782] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.310842] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.318898] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.326886] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.334899] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.343167] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.351155] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.359148] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.367152] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.375278] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.383389] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.391274] usb 2-1.3: USB disconnect, device number 4
>[13057.391280] usb 2-1.3.3: USB disconnect, device number 6
>[13057.391410] usb 2-1.3: clear tt 3 (9062) error -71
>[13057.395786] usb 2-1.3.4: USB disconnect, device number 7
>[13057.580906] usb 2-1.3: new high-speed USB device number 8 using ehci-pci
>[13057.666533] usb 2-1.3: New USB device found, idVendor=1a40, idProduct=0101
>[13057.666540] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[13057.666545] usb 2-1.3: Product: USB 2.0 Hub [MTT]
>[13057.667406] hub 2-1.3:1.0: USB hub found
>[13057.667490] hub 2-1.3:1.0: 4 ports detected
>[13057.929945] usb 2-1.3.3: new full-speed USB device number 9 using ehci-pci
>[13058.008557] usb 2-1.3.3: New USB device found, idVendor=050d, idProduct=0121
>[13058.008564] usb 2-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[13058.008569] usb 2-1.3.3: Product: BELKIN BLUETOOTH USB ADAPTER CL. 1
>[13058.008572] usb 2-1.3.3: Manufacturer: Broadcom Corp
>[13058.074922] usb 2-1.3.4: new high-speed USB device number 10 using ehci-pci
>[13058.152413] usb 2-1.3.4: New USB device found, idVendor=058f, idProduct=6362
>[13058.152420] usb 2-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[13058.152424] usb 2-1.3.4: Product: Mass Storage Device
>[13058.152428] usb 2-1.3.4: Manufacturer: Generic
>[13058.152431] usb 2-1.3.4: SerialNumber: 058F312D81B
>[13058.153220] usb-storage 2-1.3.4:1.0: USB Mass Storage device detected
>[13058.154533] scsi11 : usb-storage 2-1.3.4:1.0
>[13059.156824] scsi 11:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[13059.157589] scsi 11:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[13059.158303] scsi 11:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[13059.158924] scsi 11:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[13059.159672] sd 11:0:0:0: Attached scsi generic sg7 type 0
>[13059.161300] sd 11:0:0:1: Attached scsi generic sg8 type 0
>[13059.162568] sd 11:0:0:2: Attached scsi generic sg9 type 0
>[13059.163642] sd 11:0:0:3: Attached scsi generic sg10 type 0
>[13059.168142] sd 11:0:0:0: [sdg] Attached SCSI removable disk
>[13059.170767] sd 11:0:0:1: [sdh] Attached SCSI removable disk
>[13059.173520] sd 11:0:0:2: [sdi] Attached SCSI removable disk
>[13059.175141] sd 11:0:0:3: [sdj] Attached SCSI removable disk
>[13101.338763] usb 2-1.3.1: new high-speed USB device number 11 using ehci-pci
>[13101.415229] usb 2-1.3.1: New USB device found, idVendor=090c, idProduct=1000
>[13101.415236] usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[13101.415240] usb 2-1.3.1: Product: USB Flash Disk
>[13101.415244] usb 2-1.3.1: Manufacturer: General
>[13101.415247] usb 2-1.3.1: SerialNumber: 0423530000007286
>[13101.416031] usb-storage 2-1.3.1:1.0: USB Mass Storage device detected
>[13101.416134] scsi12 : usb-storage 2-1.3.1:1.0
>[13102.997780] scsi 12:0:0:0: Direct-Access     General  USB Flash Disk   1100 PQ: 0 ANSI: 4
>[13102.998374] sd 12:0:0:0: Attached scsi generic sg11 type 0
>[13103.001870] sd 12:0:0:0: [sdk] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
>[13103.002910] sd 12:0:0:0: [sdk] Write Protect is off
>[13103.002914] sd 12:0:0:0: [sdk] Mode Sense: 43 00 00 00
>[13103.003710] sd 12:0:0:0: [sdk] No Caching mode page found
>[13103.003713] sd 12:0:0:0: [sdk] Assuming drive cache: write through
>[13103.007990] sd 12:0:0:0: [sdk] No Caching mode page found
>[13103.007993] sd 12:0:0:0: [sdk] Assuming drive cache: write through
>[13103.008717]  sdk: sdk1
>[13103.011456] sd 12:0:0:0: [sdk] No Caching mode page found
>[13103.011460] sd 12:0:0:0: [sdk] Assuming drive cache: write through
>[13103.011462] sd 12:0:0:0: [sdk] Attached SCSI removable disk
>[13103.327267] SELinux: initialized (dev sdk1, type vfat), uses genfs_contexts
>[21665.162234] TCP: lp registered
>[107985.311747] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
>[107985.398341] usb 1-1.2: New USB device found, idVendor=0fca, idProduct=8004
>[107985.398347] usb 1-1.2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[107985.398351] usb 1-1.2: Product: RIM Composite Device
>[107985.398355] usb 1-1.2: Manufacturer: Research In Motion
>[107985.398358] usb 1-1.2: SerialNumber: AEF25785BBFF17CD09302CFC228B07A5B2B7D244
>[107985.404974] usb-storage 1-1.2:1.1: USB Mass Storage device detected
>[107985.405118] scsi13 : usb-storage 1-1.2:1.1
>[107986.406628] scsi 13:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[107986.407534] sd 13:0:0:0: Attached scsi generic sg12 type 0
>[107986.409091] sd 13:0:0:0: [sdl] Attached SCSI removable disk
>[140342.688619] sdk: detected capacity change from 8053063680 to 0
>[140387.132465] usb 2-1.3: clear tt 3 (9092) error -71
>[140387.142836] usb 2-1.3: clear tt 3 (9092) error -71
>[140387.150843] usb 2-1.3: clear tt 3 (9092) error -71
>[140387.159095] usb 2-1.3: clear tt 3 (9092) error -71
>[140387.167106] usb 2-1.3: clear tt 3 (9092) error -71
>[140387.175358] usb 2-1.3: clear tt 3 (9092) error -71
>[140387.183468] usb 2-1.3: clear tt 3 (9092) error -71
>[140387.189345] usb 2-1.3: USB disconnect, device number 8
>[140387.189350] usb 2-1.3.1: USB disconnect, device number 11
>[140387.190369] usb 2-1.3.3: USB disconnect, device number 9
>[140387.194642] usb 2-1.3: clear tt 3 (9092) error -71
>[140387.195800] usb 2-1.3.4: USB disconnect, device number 10
>[140387.381137] usb 2-1.3: new high-speed USB device number 12 using ehci-pci
>[140387.466472] usb 2-1.3: New USB device found, idVendor=1a40, idProduct=0101
>[140387.466479] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[140387.466483] usb 2-1.3: Product: USB 2.0 Hub [MTT]
>[140387.467989] hub 2-1.3:1.0: USB hub found
>[140387.468085] hub 2-1.3:1.0: 4 ports detected
>[140387.731013] usb 2-1.3.1: new high-speed USB device number 13 using ehci-pci
>[140387.807254] usb 2-1.3.1: New USB device found, idVendor=090c, idProduct=1000
>[140387.807261] usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[140387.807265] usb 2-1.3.1: Product: USB Flash Disk
>[140387.807269] usb 2-1.3.1: Manufacturer: General
>[140387.807272] usb 2-1.3.1: SerialNumber: 0423530000007286
>[140387.807784] usb-storage 2-1.3.1:1.0: USB Mass Storage device detected
>[140387.808802] scsi14 : usb-storage 2-1.3.1:1.0
>[140387.871018] usb 2-1.3.3: new full-speed USB device number 14 using ehci-pci
>[140387.949726] usb 2-1.3.3: New USB device found, idVendor=050d, idProduct=0121
>[140387.949756] usb 2-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[140387.949760] usb 2-1.3.3: Product: BELKIN BLUETOOTH USB ADAPTER CL. 1
>[140387.949764] usb 2-1.3.3: Manufacturer: Broadcom Corp
>[140388.014013] usb 2-1.3.4: new high-speed USB device number 15 using ehci-pci
>[140388.091482] usb 2-1.3.4: New USB device found, idVendor=058f, idProduct=6362
>[140388.091489] usb 2-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[140388.091494] usb 2-1.3.4: Product: Mass Storage Device
>[140388.091497] usb 2-1.3.4: Manufacturer: Generic
>[140388.091501] usb 2-1.3.4: SerialNumber: 058F312D81B
>[140388.092303] usb-storage 2-1.3.4:1.0: USB Mass Storage device detected
>[140388.092402] scsi15 : usb-storage 2-1.3.4:1.0
>[140388.476525] usb 2-1.3.1: USB disconnect, device number 13
>[140389.095962] scsi 15:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[140389.096846] scsi 15:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[140389.097649] scsi 15:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[140389.098396] scsi 15:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[140389.102147] sd 15:0:0:0: Attached scsi generic sg7 type 0
>[140389.103011] sd 15:0:0:1: Attached scsi generic sg8 type 0
>[140389.103225] sd 15:0:0:2: Attached scsi generic sg9 type 0
>[140389.106437] sd 15:0:0:3: Attached scsi generic sg10 type 0
>[140389.109213] sd 15:0:0:0: [sdg] Attached SCSI removable disk
>[140389.111711] sd 15:0:0:2: [sdi] Attached SCSI removable disk
>[140389.112736] sd 15:0:0:1: [sdh] Attached SCSI removable disk
>[140389.114835] sd 15:0:0:3: [sdj] Attached SCSI removable disk
>[140390.179012] usb 2-1.3.1: new high-speed USB device number 16 using ehci-pci
>[140390.255799] usb 2-1.3.1: New USB device found, idVendor=090c, idProduct=1000
>[140390.255805] usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[140390.255809] usb 2-1.3.1: Product: USB Flash Disk
>[140390.255813] usb 2-1.3.1: Manufacturer: General
>[140390.255816] usb 2-1.3.1: SerialNumber: 0423530000007286
>[140390.256435] usb-storage 2-1.3.1:1.0: USB Mass Storage device detected
>[140390.256594] scsi16 : usb-storage 2-1.3.1:1.0
>[140390.517377] usb 2-1.3: USB disconnect, device number 12
>[140390.517385] usb 2-1.3.1: USB disconnect, device number 16
>[140390.518469] usb 2-1.3.3: USB disconnect, device number 14
>[140390.523482] usb 2-1.3.4: USB disconnect, device number 15
>[140390.708935] usb 2-1.3: new high-speed USB device number 17 using ehci-pci
>[140390.794670] usb 2-1.3: New USB device found, idVendor=1a40, idProduct=0101
>[140390.794677] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[140390.794681] usb 2-1.3: Product: USB 2.0 Hub [MTT]
>[140390.795444] hub 2-1.3:1.0: USB hub found
>[140390.795599] hub 2-1.3:1.0: 4 ports detected
>[140391.057904] usb 2-1.3.1: new high-speed USB device number 18 using ehci-pci
>[140391.134259] usb 2-1.3.1: New USB device found, idVendor=090c, idProduct=1000
>[140391.134266] usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[140391.134270] usb 2-1.3.1: Product: USB Flash Disk
>[140391.134274] usb 2-1.3.1: Manufacturer: General
>[140391.134277] usb 2-1.3.1: SerialNumber: 0423530000007286
>[140391.135482] usb-storage 2-1.3.1:1.0: USB Mass Storage device detected
>[140391.136270] scsi17 : usb-storage 2-1.3.1:1.0
>[140391.200054] usb 2-1.3.3: new full-speed USB device number 19 using ehci-pci
>[140391.278510] usb 2-1.3.3: New USB device found, idVendor=050d, idProduct=0121
>[140391.278517] usb 2-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[140391.278521] usb 2-1.3.3: Product: BELKIN BLUETOOTH USB ADAPTER CL. 1
>[140391.278525] usb 2-1.3.3: Manufacturer: Broadcom Corp
>[140391.343929] usb 2-1.3.4: new high-speed USB device number 20 using ehci-pci
>[140391.421426] usb 2-1.3.4: New USB device found, idVendor=058f, idProduct=6362
>[140391.421432] usb 2-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[140391.421437] usb 2-1.3.4: Product: Mass Storage Device
>[140391.421440] usb 2-1.3.4: Manufacturer: Generic
>[140391.421443] usb 2-1.3.4: SerialNumber: 058F312D81B
>[140391.422088] usb-storage 2-1.3.4:1.0: USB Mass Storage device detected
>[140391.422831] scsi18 : usb-storage 2-1.3.4:1.0
>[140392.425991] scsi 18:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[140392.426745] scsi 18:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[140392.427400] scsi 18:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[140392.428045] scsi 18:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[140392.720818] scsi 17:0:0:0: Direct-Access     General  USB Flash Disk   1100 PQ: 0 ANSI: 4
>[140392.721517] sd 17:0:0:0: Attached scsi generic sg7 type 0
>[140392.721898] sd 18:0:0:0: Attached scsi generic sg8 type 0
>[140392.722136] sd 18:0:0:1: Attached scsi generic sg9 type 0
>[140392.722396] sd 18:0:0:2: Attached scsi generic sg10 type 0
>[140392.722750] sd 18:0:0:3: Attached scsi generic sg11 type 0
>[140392.726248] sd 18:0:0:0: [sdh] Attached SCSI removable disk
>[140392.726263] sd 17:0:0:0: [sdg] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
>[140392.726870] sd 18:0:0:1: [sdi] Attached SCSI removable disk
>[140392.727001] sd 17:0:0:0: [sdg] Write Protect is off
>[140392.727004] sd 17:0:0:0: [sdg] Mode Sense: 43 00 00 00
>[140392.728287] sd 17:0:0:0: [sdg] No Caching mode page found
>[140392.728292] sd 17:0:0:0: [sdg] Assuming drive cache: write through
>[140392.728415] sd 18:0:0:3: [sdk] Attached SCSI removable disk
>[140392.730246] sd 18:0:0:2: [sdj] Attached SCSI removable disk
>[140392.732873] sd 17:0:0:0: [sdg] No Caching mode page found
>[140392.732877] sd 17:0:0:0: [sdg] Assuming drive cache: write through
>[140392.734191]  sdg: sdg1
>[140392.739125] sd 17:0:0:0: [sdg] No Caching mode page found
>[140392.739129] sd 17:0:0:0: [sdg] Assuming drive cache: write through
>[140392.739133] sd 17:0:0:0: [sdg] Attached SCSI removable disk
>[140393.081442] SELinux: initialized (dev sdg1, type vfat), uses genfs_contexts
>[140410.269797] sdg: detected capacity change from 8053063680 to 0
>[140413.566899] usb 2-1.3.1: USB disconnect, device number 18
>[158485.308518] usb 1-1.2: USB disconnect, device number 3
>[189333.010760] usb 2-1.3.1: new high-speed USB device number 21 using ehci-pci
>[189333.086962] usb 2-1.3.1: New USB device found, idVendor=090c, idProduct=1000
>[189333.086969] usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[189333.086973] usb 2-1.3.1: Product: USB Flash Disk
>[189333.086976] usb 2-1.3.1: Manufacturer: General
>[189333.086980] usb 2-1.3.1: SerialNumber: 0423530000007286
>[189333.088264] usb-storage 2-1.3.1:1.0: USB Mass Storage device detected
>[189333.088354] scsi19 : usb-storage 2-1.3.1:1.0
>[189334.672308] scsi 19:0:0:0: Direct-Access     General  USB Flash Disk   1100 PQ: 0 ANSI: 4
>[189334.673331] sd 19:0:0:0: [sdg] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
>[189334.674203] sd 19:0:0:0: [sdg] Write Protect is off
>[189334.674208] sd 19:0:0:0: [sdg] Mode Sense: 43 00 00 00
>[189334.675686] sd 19:0:0:0: Attached scsi generic sg7 type 0
>[189334.677403] sd 19:0:0:0: [sdg] No Caching mode page found
>[189334.677408] sd 19:0:0:0: [sdg] Assuming drive cache: write through
>[189334.682980] sd 19:0:0:0: [sdg] No Caching mode page found
>[189334.682988] sd 19:0:0:0: [sdg] Assuming drive cache: write through
>[189334.683725]  sdg: sdg1
>[189334.686821] sd 19:0:0:0: [sdg] No Caching mode page found
>[189334.686824] sd 19:0:0:0: [sdg] Assuming drive cache: write through
>[189334.686826] sd 19:0:0:0: [sdg] Attached SCSI removable disk
>[189334.943147] SELinux: initialized (dev sdg1, type vfat), uses genfs_contexts
>[189381.329048] sdg: detected capacity change from 8053063680 to 0
>[189386.439762] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.450143] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.458141] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.466140] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.474140] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.482292] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.490299] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.498252] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.506232] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.514537] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.522515] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.530504] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.538487] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.546509] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.554516] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.562501] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.570494] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.578495] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.586517] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.594515] usb 2-1.3: clear tt 3 (9132) error -71
>[189386.596239] usb 2-1.3: USB disconnect, device number 17
>[189386.596244] usb 2-1.3.1: USB disconnect, device number 21
>[189386.600579] usb 2-1.3.3: USB disconnect, device number 19
>[189386.601471] usb 2-1.3.4: USB disconnect, device number 20
>[189386.788232] usb 2-1.3: new high-speed USB device number 22 using ehci-pci
>[189386.873743] usb 2-1.3: New USB device found, idVendor=1a40, idProduct=0101
>[189386.873747] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[189386.873750] usb 2-1.3: Product: USB 2.0 Hub [MTT]
>[189386.874764] hub 2-1.3:1.0: USB hub found
>[189386.874970] hub 2-1.3:1.0: 4 ports detected
>[189387.138407] usb 2-1.3.1: new high-speed USB device number 23 using ehci-pci
>[189387.214544] usb 2-1.3.1: New USB device found, idVendor=090c, idProduct=1000
>[189387.214551] usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[189387.214555] usb 2-1.3.1: Product: USB Flash Disk
>[189387.214559] usb 2-1.3.1: Manufacturer: General
>[189387.214562] usb 2-1.3.1: SerialNumber: 0423530000007286
>[189387.215188] usb-storage 2-1.3.1:1.0: USB Mass Storage device detected
>[189387.216261] scsi20 : usb-storage 2-1.3.1:1.0
>[189387.278420] usb 2-1.3.3: new full-speed USB device number 24 using ehci-pci
>[189387.357261] usb 2-1.3.3: New USB device found, idVendor=050d, idProduct=0121
>[189387.357268] usb 2-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[189387.357272] usb 2-1.3.3: Product: BELKIN BLUETOOTH USB ADAPTER CL. 1
>[189387.357276] usb 2-1.3.3: Manufacturer: Broadcom Corp
>[189387.423234] usb 2-1.3.4: new high-speed USB device number 25 using ehci-pci
>[189387.500767] usb 2-1.3.4: New USB device found, idVendor=058f, idProduct=6362
>[189387.500774] usb 2-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[189387.500779] usb 2-1.3.4: Product: Mass Storage Device
>[189387.500782] usb 2-1.3.4: Manufacturer: Generic
>[189387.500786] usb 2-1.3.4: SerialNumber: 058F312D81B
>[189387.502275] usb-storage 2-1.3.4:1.0: USB Mass Storage device detected
>[189387.502885] scsi21 : usb-storage 2-1.3.4:1.0
>[189388.504493] scsi 21:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[189388.505293] scsi 21:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[189388.506049] scsi 21:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[189388.506793] scsi 21:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[189388.800579] scsi 20:0:0:0: Direct-Access     General  USB Flash Disk   1100 PQ: 0 ANSI: 4
>[189388.801263] sd 20:0:0:0: Attached scsi generic sg7 type 0
>[189388.801667] sd 21:0:0:0: Attached scsi generic sg8 type 0
>[189388.801929] sd 21:0:0:1: Attached scsi generic sg9 type 0
>[189388.802171] sd 21:0:0:2: Attached scsi generic sg10 type 0
>[189388.802417] sd 21:0:0:3: Attached scsi generic sg11 type 0
>[189388.802944] sd 20:0:0:0: [sdg] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
>[189388.803620] sd 20:0:0:0: [sdg] Write Protect is off
>[189388.803623] sd 20:0:0:0: [sdg] Mode Sense: 43 00 00 00
>[189388.804574] sd 20:0:0:0: [sdg] No Caching mode page found
>[189388.804578] sd 20:0:0:0: [sdg] Assuming drive cache: write through
>[189388.810147] sd 20:0:0:0: [sdg] No Caching mode page found
>[189388.810152] sd 20:0:0:0: [sdg] Assuming drive cache: write through
>[189388.811573]  sdg: sdg1
>[189388.814132] sd 20:0:0:0: [sdg] No Caching mode page found
>[189388.814136] sd 20:0:0:0: [sdg] Assuming drive cache: write through
>[189388.814139] sd 20:0:0:0: [sdg] Attached SCSI removable disk
>[189388.814373] sd 21:0:0:0: [sdh] Attached SCSI removable disk
>[189388.814998] sd 21:0:0:1: [sdi] Attached SCSI removable disk
>[189388.817142] sd 21:0:0:2: [sdj] Attached SCSI removable disk
>[189388.818619] sd 21:0:0:3: [sdk] Attached SCSI removable disk
>[189389.170289] SELinux: initialized (dev sdg1, type vfat), uses genfs_contexts
>[189389.423372] usb 2-1.3.1: USB disconnect, device number 23
>[189389.448368] FAT-fs (sdg1): unable to read boot sector to mark fs as dirty
>[197349.250467] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
>[197349.336661] usb 1-1.2: New USB device found, idVendor=0fca, idProduct=8004
>[197349.336671] usb 1-1.2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[197349.336677] usb 1-1.2: Product: RIM Composite Device
>[197349.336683] usb 1-1.2: Manufacturer: Research In Motion
>[197349.336688] usb 1-1.2: SerialNumber: B202C12FE9E10952B3FC6D5E92BBAB90C5155D1E
>[197349.347099] usb-storage 1-1.2:1.1: USB Mass Storage device detected
>[197349.347215] scsi22 : usb-storage 1-1.2:1.1
>[197350.350727] scsi 22:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[197350.351812] sd 22:0:0:0: Attached scsi generic sg7 type 0
>[197350.362680] sd 22:0:0:0: [sdg] Attached SCSI removable disk
>[221117.291993] usb 1-1.2: USB disconnect, device number 4
>[229090.884265] usb 1-1.2: new high-speed USB device number 5 using ehci-pci
>[229090.970644] usb 1-1.2: New USB device found, idVendor=0fca, idProduct=8004
>[229090.970651] usb 1-1.2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[229090.970656] usb 1-1.2: Product: RIM Composite Device
>[229090.970659] usb 1-1.2: Manufacturer: Research In Motion
>[229090.970663] usb 1-1.2: SerialNumber: AEF25785BBFF17CD09302CFC228B07A5B2B7D244
>[229090.981353] usb-storage 1-1.2:1.1: USB Mass Storage device detected
>[229090.981512] scsi23 : usb-storage 1-1.2:1.1
>[229091.984712] scsi 23:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[229091.985663] sd 23:0:0:0: Attached scsi generic sg7 type 0
>[229091.988481] sd 23:0:0:0: [sdg] Attached SCSI removable disk
>[230541.240344] usb 1-1.2: USB disconnect, device number 5
>[342246.263305] usb 2-1.3.3: USB disconnect, device number 24
>[342246.942071] usb 2-1.3.3: new full-speed USB device number 26 using ehci-pci
>[342247.020576] usb 2-1.3.3: New USB device found, idVendor=050d, idProduct=0121
>[342247.020582] usb 2-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[342247.020587] usb 2-1.3.3: Product: BELKIN BLUETOOTH USB ADAPTER CL. 1
>[342247.020590] usb 2-1.3.3: Manufacturer: Broadcom Corp
>[359175.315970] usb 1-1.2: new high-speed USB device number 6 using ehci-pci
>[359175.402343] usb 1-1.2: New USB device found, idVendor=0fca, idProduct=8004
>[359175.402349] usb 1-1.2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[359175.402353] usb 1-1.2: Product: RIM Composite Device
>[359175.402357] usb 1-1.2: Manufacturer: Research In Motion
>[359175.402360] usb 1-1.2: SerialNumber: AEF25785BBFF17CD09302CFC228B07A5B2B7D244
>[359175.410457] usb-storage 1-1.2:1.1: USB Mass Storage device detected
>[359175.411003] scsi24 : usb-storage 1-1.2:1.1
>[359176.414097] scsi 24:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[359176.414912] sd 24:0:0:0: Attached scsi generic sg7 type 0
>[359176.418796] sd 24:0:0:0: [sdg] Attached SCSI removable disk
>[402993.918414] usb 1-1.2: USB disconnect, device number 6
>[403070.557793] polkitd[1271]: segfault at 0 ip b71451ef sp bfec2900 error 4 in libmozjs-17.0.so[b708a000+3aa000]
>[435224.441456] usb 1-1.2: new high-speed USB device number 7 using ehci-pci
>[435224.528035] usb 1-1.2: New USB device found, idVendor=0fca, idProduct=8004
>[435224.528042] usb 1-1.2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[435224.528046] usb 1-1.2: Product: RIM Composite Device
>[435224.528050] usb 1-1.2: Manufacturer: Research In Motion
>[435224.528053] usb 1-1.2: SerialNumber: AEF25785BBFF17CD09302CFC228B07A5B2B7D244
>[435224.536534] usb-storage 1-1.2:1.1: USB Mass Storage device detected
>[435224.537141] scsi25 : usb-storage 1-1.2:1.1
>[435225.541781] scsi 25:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[435225.542608] sd 25:0:0:0: Attached scsi generic sg7 type 0
>[435225.547249] sd 25:0:0:0: [sdg] Attached SCSI removable disk
>[439835.740272] usb 1-1.2: USB disconnect, device number 7
>[500547.081111] usb 1-1.2: new high-speed USB device number 8 using ehci-pci
>[500547.166813] usb 1-1.2: New USB device found, idVendor=0fca, idProduct=8004
>[500547.166818] usb 1-1.2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[500547.166820] usb 1-1.2: Product: RIM Composite Device
>[500547.166822] usb 1-1.2: Manufacturer: Research In Motion
>[500547.166824] usb 1-1.2: SerialNumber: B202C12FE9E10952B3FC6D5E92BBAB90C5155D1E
>[500547.173968] usb-storage 1-1.2:1.1: USB Mass Storage device detected
>[500547.174044] scsi26 : usb-storage 1-1.2:1.1
>[500548.176651] scsi 26:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[500548.177553] sd 26:0:0:0: Attached scsi generic sg7 type 0
>[500548.184148] sd 26:0:0:0: [sdg] Attached SCSI removable disk
>[502059.812093] usb 1-1.2: USB disconnect, device number 8
>[529459.977145] usb 1-1.1: new high-speed USB device number 9 using ehci-pci
>[529460.230177] usb 1-1.1: new high-speed USB device number 10 using ehci-pci
>[529460.317982] usb 1-1.1: New USB device found, idVendor=2672, idProduct=0002
>[529460.317990] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[529460.317994] usb 1-1.1: Product: Storage
>[529460.317997] usb 1-1.1: Manufacturer: GoPro
>[529460.318000] usb 1-1.1: SerialNumber: 123456789ABC
>[529460.319539] usb-storage 1-1.1:1.0: USB Mass Storage device detected
>[529460.321552] scsi27 : usb-storage 1-1.1:1.0
>[529461.089489] usb 1-1.1: USB disconnect, device number 10
>[529498.616897] usb 1-1.1: new high-speed USB device number 11 using ehci-pci
>[529498.704619] usb 1-1.1: New USB device found, idVendor=2672, idProduct=0002
>[529498.704625] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[529498.704630] usb 1-1.1: Product: Storage
>[529498.704633] usb 1-1.1: Manufacturer: GoPro
>[529498.704636] usb 1-1.1: SerialNumber: 123456789ABC
>[529498.705419] usb-storage 1-1.1:1.0: USB Mass Storage device detected
>[529498.707940] scsi28 : usb-storage 1-1.1:1.0
>[529499.710298] scsi 28:0:0:0: Direct-Access     GoPro    Storage          v2.0 PQ: 0 ANSI: 0
>[529499.711145] sd 28:0:0:0: Attached scsi generic sg7 type 0
>[529499.716615] sd 28:0:0:0: [sdg] 61405184 512-byte logical blocks: (31.4 GB/29.2 GiB)
>[529499.717921] sd 28:0:0:0: [sdg] Write Protect is off
>[529499.717927] sd 28:0:0:0: [sdg] Mode Sense: 8f 00 00 08
>[529499.719114] sd 28:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[529499.728278]  sdg: sdg1
>[529499.736022] sd 28:0:0:0: [sdg] Attached SCSI removable disk
>[529500.222683] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[529500.222704] SELinux: initialized (dev sdg1, type vfat), uses genfs_contexts
>[529837.017649]  sdg: sdg1
>[529839.139504] usb 1-1.1: USB disconnect, device number 11
>[529848.542307] usb 2-1.3.4: USB disconnect, device number 25
>[529848.716615] usb 2-1.3.4: new high-speed USB device number 27 using ehci-pci
>[529848.794145] usb 2-1.3.4: New USB device found, idVendor=058f, idProduct=6362
>[529848.794152] usb 2-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[529848.794156] usb 2-1.3.4: Product: Mass Storage Device
>[529848.794160] usb 2-1.3.4: Manufacturer: Generic
>[529848.794163] usb 2-1.3.4: SerialNumber: 058F312D81B
>[529848.796775] usb-storage 2-1.3.4:1.0: USB Mass Storage device detected
>[529848.797292] scsi29 : usb-storage 2-1.3.4:1.0
>[529849.799868] scsi 29:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[529849.800842] scsi 29:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[529849.801541] scsi 29:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[529849.802291] scsi 29:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[529849.804660] sd 29:0:0:0: Attached scsi generic sg7 type 0
>[529849.805425] sd 29:0:0:1: Attached scsi generic sg8 type 0
>[529849.807942] sd 29:0:0:2: Attached scsi generic sg9 type 0
>[529849.809295] sd 29:0:0:3: Attached scsi generic sg10 type 0
>[529850.218768] sd 29:0:0:0: [sdg] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
>[529850.221624] sd 29:0:0:0: [sdg] Write Protect is off
>[529850.221628] sd 29:0:0:0: [sdg] Mode Sense: 03 00 00 00
>[529850.231294] sd 29:0:0:0: [sdg] No Caching mode page found
>[529850.231300] sd 29:0:0:0: [sdg] Assuming drive cache: write through
>[529850.234158] sd 29:0:0:2: [sdi] Attached SCSI removable disk
>[529850.235139] sd 29:0:0:3: [sdj] Attached SCSI removable disk
>[529850.245631] sd 29:0:0:1: [sdh] Attached SCSI removable disk
>[529850.250936] sd 29:0:0:0: [sdg] No Caching mode page found
>[529850.250940] sd 29:0:0:0: [sdg] Assuming drive cache: write through
>[529850.259825]  sdg: sdg1
>[529850.266897] sd 29:0:0:0: [sdg] No Caching mode page found
>[529850.266904] sd 29:0:0:0: [sdg] Assuming drive cache: write through
>[529850.266909] sd 29:0:0:0: [sdg] Attached SCSI removable disk
>[529850.865438] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[529850.865454] SELinux: initialized (dev sdg1, type vfat), uses genfs_contexts
>[530212.384830] sdg: detected capacity change from 3965190144 to 0
>[530468.889192] sd 29:0:0:0: [sdg] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
>[530468.891664] sd 29:0:0:0: [sdg] No Caching mode page found
>[530468.891672] sd 29:0:0:0: [sdg] Assuming drive cache: write through
>[530468.895536] sd 29:0:0:0: [sdg] No Caching mode page found
>[530468.895544] sd 29:0:0:0: [sdg] Assuming drive cache: write through
>[530468.903827]  sdg: sdg1
>[530469.713692] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[530469.713704] SELinux: initialized (dev sdg1, type vfat), uses genfs_contexts
>[530520.983141] nautilus[2704]: segfault at 10037 ip 4eb98cd2 sp bff504a0 error 4 in libsqlite3.so.0.8.6 (deleted)[4eb5c000+bd000]
>[530568.978519] sdg: detected capacity change from 3965190144 to 0
>[530975.209565] usb 2-1.3.4: USB disconnect, device number 27
>[530975.380247] usb 2-1.3.4: new high-speed USB device number 28 using ehci-pci
>[530975.458274] usb 2-1.3.4: New USB device found, idVendor=058f, idProduct=6362
>[530975.458281] usb 2-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[530975.458286] usb 2-1.3.4: Product: Mass Storage Device
>[530975.458289] usb 2-1.3.4: Manufacturer: Generic
>[530975.458293] usb 2-1.3.4: SerialNumber: 058F312D81B
>[530975.459030] usb-storage 2-1.3.4:1.0: USB Mass Storage device detected
>[530975.460112] scsi30 : usb-storage 2-1.3.4:1.0
>[530976.463294] scsi 30:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[530976.464115] scsi 30:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[530976.464983] scsi 30:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[530976.465695] scsi 30:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[530976.466556] sd 30:0:0:0: Attached scsi generic sg7 type 0
>[530976.467287] sd 30:0:0:1: Attached scsi generic sg8 type 0
>[530976.467797] sd 30:0:0:2: Attached scsi generic sg9 type 0
>[530976.468322] sd 30:0:0:3: Attached scsi generic sg10 type 0
>[530976.479053] sd 30:0:0:0: [sdg] Attached SCSI removable disk
>[530976.479111] sd 30:0:0:2: [sdi] Attached SCSI removable disk
>[530976.479756] sd 30:0:0:1: [sdh] Attached SCSI removable disk
>[530976.481382] sd 30:0:0:3: [sdj] Attached SCSI removable disk
>[531006.698003] usb 2-1.3.4: USB disconnect, device number 28
>[531006.874075] usb 2-1.3.4: new high-speed USB device number 29 using ehci-pci
>[531006.950939] usb 2-1.3.4: New USB device found, idVendor=058f, idProduct=6362
>[531006.950944] usb 2-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[531006.950946] usb 2-1.3.4: Product: Mass Storage Device
>[531006.950949] usb 2-1.3.4: Manufacturer: Generic
>[531006.950951] usb 2-1.3.4: SerialNumber: 058F312D81B
>[531006.951608] usb-storage 2-1.3.4:1.0: USB Mass Storage device detected
>[531006.951775] scsi31 : usb-storage 2-1.3.4:1.0
>[531007.953198] scsi 31:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[531007.954171] scsi 31:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[531007.955516] scsi 31:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[531007.956241] scsi 31:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[531007.957122] sd 31:0:0:0: Attached scsi generic sg7 type 0
>[531007.957983] sd 31:0:0:1: Attached scsi generic sg8 type 0
>[531007.958488] sd 31:0:0:2: Attached scsi generic sg9 type 0
>[531007.959035] sd 31:0:0:3: Attached scsi generic sg10 type 0
>[531008.372205] sd 31:0:0:0: [sdg] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
>[531008.375199] sd 31:0:0:0: [sdg] Write Protect is off
>[531008.375202] sd 31:0:0:0: [sdg] Mode Sense: 03 00 00 00
>[531008.380472] sd 31:0:0:0: [sdg] No Caching mode page found
>[531008.380478] sd 31:0:0:0: [sdg] Assuming drive cache: write through
>[531008.382287] sd 31:0:0:1: [sdh] Attached SCSI removable disk
>[531008.386611] sd 31:0:0:3: [sdj] Attached SCSI removable disk
>[531008.388925] sd 31:0:0:2: [sdi] Attached SCSI removable disk
>[531008.399830] sd 31:0:0:0: [sdg] No Caching mode page found
>[531008.399834] sd 31:0:0:0: [sdg] Assuming drive cache: write through
>[531008.409787]  sdg: sdg1
>[531008.415115] sd 31:0:0:0: [sdg] No Caching mode page found
>[531008.415122] sd 31:0:0:0: [sdg] Assuming drive cache: write through
>[531008.415128] sd 31:0:0:0: [sdg] Attached SCSI removable disk
>[531009.006391] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[531009.006402] SELinux: initialized (dev sdg1, type vfat), uses genfs_contexts
>[531355.039097] nautilus[26773]: segfault at 10037 ip b702cd12 sp bfb12030 error 4 in libsqlite3.so.0.8.6[b6ff0000+bd000]
>[550390.623844] type=1305 audit(1396738582.509:2635): audit_pid=0 old=1167 auid=4294967295 ses=4294967295
> subj=system_u:system_r:auditd_t:s0 res=1
>[550390.653593] type=1130 audit(1396738582.539:2636): pid=1 uid=0 auid=4294967295 ses=4294967295
> subj=system_u:system_r:init_t:s0 msg=' comm="auditd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[550390.653614] type=1131 audit(1396738582.539:2637): pid=1 uid=0 auid=4294967295 ses=4294967295
> subj=system_u:system_r:init_t:s0 msg=' comm="auditd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[550391.628767] type=1305 audit(1396738583.514:2638): audit_backlog_limit=320 old=320 auid=4294967295 ses=4294967295
> subj=system_u:system_r:auditctl_t:s0 res=1
>[550391.630655] type=1130 audit(1396738583.516:2639): pid=1 uid=0 auid=4294967295 ses=4294967295
> subj=system_u:system_r:init_t:s0 msg=' comm="auditd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[550391.639940] type=1305 audit(1396738583.525:2640): audit_enabled=1 old=1 auid=4294967295 ses=4294967295
> subj=system_u:system_r:auditd_t:s0 res=1
>[550391.639959] type=1305 audit(1396738583.525:2641): audit_pid=17032 old=0 auid=4294967295 ses=4294967295
> subj=system_u:system_r:auditd_t:s0 res=1
>[550609.645968] md: data-check of RAID array md3
>[550609.645973] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[550609.645975] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[550609.645998] md: using 128k window, over a total of 209713664k.
>[550615.833147] md: delaying data-check of md1 until md3 has finished (they share one or more physical units)
>[550621.862320] md: delaying data-check of md4 until md3 has finished (they share one or more physical units)
>[550621.863630] md: delaying data-check of md1 until md3 has finished (they share one or more physical units)
>[550627.891453] md: delaying data-check of md5 until md3 has finished (they share one or more physical units)
>[550627.891455] md: delaying data-check of md1 until md3 has finished (they share one or more physical units)
>[550627.891463] md: delaying data-check of md4 until md3 has finished (they share one or more physical units)
>[550633.920904] md: delaying data-check of md2 until md3 has finished (they share one or more physical units)
>[550633.921025] md: delaying data-check of md1 until md3 has finished (they share one or more physical units)
>[550633.921133] md: delaying data-check of md5 until md3 has finished (they share one or more physical units)
>[550633.921148] md: delaying data-check of md4 until md3 has finished (they share one or more physical units)
>[550639.949534] md: delaying data-check of md6 until md3 has finished (they share one or more physical units)
>[550639.949545] md: delaying data-check of md1 until md3 has finished (they share one or more physical units)
>[550639.949552] md: delaying data-check of md2 until md3 has finished (they share one or more physical units)
>[550639.949568] md: delaying data-check of md5 until md3 has finished (they share one or more physical units)
>[550639.949575] md: delaying data-check of md4 until md3 has finished (they share one or more physical units)
>[550645.979870] md: delaying data-check of md4 until md3 has finished (they share one or more physical units)
>[550645.979873] md: delaying data-check of md0 until md3 has finished (they share one or more physical units)
>[550645.979886] md: delaying data-check of md5 until md3 has finished (they share one or more physical units)
>[550645.979891] md: delaying data-check of md2 until md3 has finished (they share one or more physical units)
>[550645.979895] md: delaying data-check of md1 until md3 has finished (they share one or more physical units)
>[550645.979900] md: delaying data-check of md6 until md3 has finished (they share one or more physical units)
>[552835.966613] md: md3: data-check done.
>[552835.973191] md: data-check of RAID array md0
>[552835.973197] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[552835.973200] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[552835.973206] md: delaying data-check of md6 until md1 has finished (they share one or more physical units)
>[552835.973210] md: using 128k window, over a total of 29358592k.
>[552835.973223] md: delaying data-check of md4 until md1 has finished (they share one or more physical units)
>[552835.973227] md: delaying data-check of md5 until md2 has finished (they share one or more physical units)
>[552835.973229] md: delaying data-check of md1 until md5 has finished (they share one or more physical units)
>[552835.973233] md: delaying data-check of md2 until md0 has finished (they share one or more physical units)
>[553101.647442] md: md0: data-check done.
>[553101.652729] md: delaying data-check of md1 until md5 has finished (they share one or more physical units)
>[553101.652739] md: delaying data-check of md6 until md1 has finished (they share one or more physical units)
>[553101.652748] md: delaying data-check of md4 until md1 has finished (they share one or more physical units)
>[553101.652756] md: delaying data-check of md5 until md2 has finished (they share one or more physical units)
>[553101.652764] md: data-check of RAID array md2
>[553101.652768] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[553101.652770] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[553101.652785] md: using 128k window, over a total of 209713664k.
>[555146.013585] md: md2: data-check done.
>[555146.019783] md: delaying data-check of md4 until md1 has finished (they share one or more physical units)
>[555146.019785] md: data-check of RAID array md5
>[555146.019787] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[555146.019789] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[555146.019799] md: using 128k window, over a total of 137894400k.
>[555146.019800] md: delaying data-check of md6 until md1 has finished (they share one or more physical units)
>[555146.019807] md: delaying data-check of md1 until md5 has finished (they share one or more physical units)
>[557229.301897] md: md5: data-check done.
>[557229.310658] md: delaying data-check of md6 until md1 has finished (they share one or more physical units)
>[557229.310660] md: data-check of RAID array md1
>[557229.310666] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[557229.310670] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[557229.310682] md: using 128k window, over a total of 178256384k.
>[557229.310692] md: delaying data-check of md4 until md1 has finished (they share one or more physical units)
>[557869.573174] polkitd[13573]: segfault at 0 ip b70661ef sp bfa26360 error 4 in libmozjs-17.0.so[b6fab000+3aa000]
>[558833.358329] md: md1: data-check done.
>[558833.361376] md: delaying data-check of md6 until md4 has finished (they share one or more physical units)
>[558833.361378] md: data-check of RAID array md4
>[558833.361384] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[558833.361387] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[558833.361397] md: using 128k window, over a total of 209713664k.
>[561445.752184] md: md4: data-check done.
>[561445.759821] md: data-check of RAID array md6
>[561445.759827] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[561445.759830] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[561445.759839] md: using 128k window, over a total of 2096064k.
>[561482.121559] md: md6: data-check done.
>[583467.638181] sdg: detected capacity change from 3965190144 to 0
>[602100.866973] sd 31:0:0:0: [sdg] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
>[602100.869461] sd 31:0:0:0: [sdg] No Caching mode page found
>[602100.869468] sd 31:0:0:0: [sdg] Assuming drive cache: write through
>[602100.872902] sd 31:0:0:0: [sdg] No Caching mode page found
>[602100.872905] sd 31:0:0:0: [sdg] Assuming drive cache: write through
>[602100.881169]  sdg: sdg1
>[602111.776075] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[602111.776085] SELinux: initialized (dev sdg1, type vfat), uses genfs_contexts
>[602179.284332] sdg: detected capacity change from 3965190144 to 0
>[602394.299043] usb 2-1.3.4: USB disconnect, device number 29
>[602394.472596] usb 2-1.3.4: new high-speed USB device number 30 using ehci-pci
>[602394.549598] usb 2-1.3.4: New USB device found, idVendor=058f, idProduct=6362
>[602394.549603] usb 2-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[602394.549605] usb 2-1.3.4: Product: Mass Storage Device
>[602394.549607] usb 2-1.3.4: Manufacturer: Generic
>[602394.549609] usb 2-1.3.4: SerialNumber: 058F312D81B
>[602394.550742] usb-storage 2-1.3.4:1.0: USB Mass Storage device detected
>[602394.552261] scsi32 : usb-storage 2-1.3.4:1.0
>[602395.555745] scsi 32:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[602395.556602] scsi 32:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[602395.557354] scsi 32:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[602395.558030] scsi 32:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[602395.558846] sd 32:0:0:0: Attached scsi generic sg7 type 0
>[602395.559352] sd 32:0:0:1: Attached scsi generic sg8 type 0
>[602395.559894] sd 32:0:0:2: Attached scsi generic sg9 type 0
>[602395.567653] sd 32:0:0:3: Attached scsi generic sg10 type 0
>[602395.972652] sd 32:0:0:0: [sdg] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
>[602395.975859] sd 32:0:0:0: [sdg] Write Protect is off
>[602395.975862] sd 32:0:0:0: [sdg] Mode Sense: 03 00 00 00
>[602395.980007] sd 32:0:0:0: [sdg] No Caching mode page found
>[602395.980013] sd 32:0:0:0: [sdg] Assuming drive cache: write through
>[602395.981927] sd 32:0:0:1: [sdh] Attached SCSI removable disk
>[602395.981935] sd 32:0:0:2: [sdi] Attached SCSI removable disk
>[602395.982489] sd 32:0:0:3: [sdj] Attached SCSI removable disk
>[602395.990337] sd 32:0:0:0: [sdg] No Caching mode page found
>[602395.990342] sd 32:0:0:0: [sdg] Assuming drive cache: write through
>[602395.998935]  sdg: sdg1
>[602396.011118] sd 32:0:0:0: [sdg] No Caching mode page found
>[602396.011124] sd 32:0:0:0: [sdg] Assuming drive cache: write through
>[602396.011128] sd 32:0:0:0: [sdg] Attached SCSI removable disk
>[602396.604160] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[602396.604173] SELinux: initialized (dev sdg1, type vfat), uses genfs_contexts
>[602460.693972] sdg: detected capacity change from 3965190144 to 0
>[630520.449508] usb 1-1.2: new high-speed USB device number 12 using ehci-pci
>[630520.536008] usb 1-1.2: New USB device found, idVendor=0fca, idProduct=8004
>[630520.536014] usb 1-1.2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[630520.536019] usb 1-1.2: Product: RIM Composite Device
>[630520.536022] usb 1-1.2: Manufacturer: Research In Motion
>[630520.536026] usb 1-1.2: SerialNumber: B202C12FE9E10952B3FC6D5E92BBAB90C5155D1E
>[630520.543338] usb-storage 1-1.2:1.1: USB Mass Storage device detected
>[630520.543418] scsi33 : usb-storage 1-1.2:1.1
>[630521.548198] scsi 33:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[630521.549188] sd 33:0:0:0: Attached scsi generic sg11 type 0
>[630521.551950] sd 33:0:0:0: [sdk] Attached SCSI removable disk
>[659198.290900] usb 1-1.2: USB disconnect, device number 12
>[660800.745447] usb 1-1.2: new high-speed USB device number 13 using ehci-pci
>[660800.832062] usb 1-1.2: New USB device found, idVendor=0fca, idProduct=8004
>[660800.832068] usb 1-1.2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[660800.832072] usb 1-1.2: Product: RIM Composite Device
>[660800.832076] usb 1-1.2: Manufacturer: Research In Motion
>[660800.832080] usb 1-1.2: SerialNumber: AEF25785BBFF17CD09302CFC228B07A5B2B7D244
>[660800.838681] usb-storage 1-1.2:1.1: USB Mass Storage device detected
>[660800.838749] scsi34 : usb-storage 1-1.2:1.1
>[660801.841537] scsi 34:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[660801.843158] sd 34:0:0:0: Attached scsi generic sg11 type 0
>[660801.846323] sd 34:0:0:0: [sdk] Attached SCSI removable disk
>[663507.384425] usb 1-1.2: USB disconnect, device number 13
>[811705.182776] usb 1-1.2: new high-speed USB device number 14 using ehci-pci
>[811705.269368] usb 1-1.2: New USB device found, idVendor=0fca, idProduct=8004
>[811705.269375] usb 1-1.2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[811705.269379] usb 1-1.2: Product: RIM Composite Device
>[811705.269382] usb 1-1.2: Manufacturer: Research In Motion
>[811705.269386] usb 1-1.2: SerialNumber: AEF25785BBFF17CD09302CFC228B07A5B2B7D244
>[811705.276518] usb-storage 1-1.2:1.1: USB Mass Storage device detected
>[811705.276613] scsi35 : usb-storage 1-1.2:1.1
>[811706.278405] scsi 35:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[811706.282135] sd 35:0:0:0: Attached scsi generic sg11 type 0
>[811706.284615] sd 35:0:0:0: [sdk] Attached SCSI removable disk
>[835241.216947] usb 1-1.2: USB disconnect, device number 14
>[857176.776128] usb 2-1.3.3: USB disconnect, device number 26
>[857177.074170] usb 2-1.3.4: USB disconnect, device number 30
>[857177.247758] usb 2-1.3.4: new high-speed USB device number 31 using ehci-pci
>[857177.324004] usb 2-1.3.4: New USB device found, idVendor=058f, idProduct=6362
>[857177.324008] usb 2-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[857177.324010] usb 2-1.3.4: Product: Mass Storage Device
>[857177.324011] usb 2-1.3.4: Manufacturer: Generic
>[857177.324013] usb 2-1.3.4: SerialNumber: 058F312D81B
>[857177.325508] usb-storage 2-1.3.4:1.0: USB Mass Storage device detected
>[857177.325564] scsi36 : usb-storage 2-1.3.4:1.0
>[857177.491734] usb 2-1.3.3: new full-speed USB device number 32 using ehci-pci
>[857177.570380] usb 2-1.3.3: New USB device found, idVendor=050d, idProduct=0121
>[857177.570387] usb 2-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[857177.570391] usb 2-1.3.3: Product: BELKIN BLUETOOTH USB ADAPTER CL. 1
>[857177.570394] usb 2-1.3.3: Manufacturer: Broadcom Corp
>[857178.329737] scsi 36:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>[857178.330563] scsi 36:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>[857178.331676] scsi 36:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>[857178.332414] scsi 36:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>[857178.333305] sd 36:0:0:0: Attached scsi generic sg7 type 0
>[857178.334318] sd 36:0:0:1: Attached scsi generic sg8 type 0
>[857178.334958] sd 36:0:0:2: Attached scsi generic sg9 type 0
>[857178.335172] sd 36:0:0:3: Attached scsi generic sg10 type 0
>[857178.345598] sd 36:0:0:0: [sdg] Attached SCSI removable disk
>[857178.346365] sd 36:0:0:1: [sdh] Attached SCSI removable disk
>[857178.347239] sd 36:0:0:2: [sdi] Attached SCSI removable disk
>[857178.347988] sd 36:0:0:3: [sdj] Attached SCSI removable disk
>[857267.477749] atkbd serio0: Unknown key pressed (translated set 2, code 0x6d on isa0060/serio0).
>[857267.477780] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.
>[857267.774613] atkbd serio0: Unknown key released (translated set 2, code 0x6d on isa0060/serio0).
>[857267.774662] atkbd serio0: Use 'setkeycodes 6d <keycode>' to make it known.
>[860268.381378] polkitd[2353]: segfault at 0 ip b70821ef sp bfe7b9a0 error 4 in libmozjs-17.0.so (deleted)[b6fc7000+3aa000]
>[919384.984380] usb 1-1.2: new high-speed USB device number 15 using ehci-pci
>[919385.070863] usb 1-1.2: New USB device found, idVendor=0fca, idProduct=8004
>[919385.070870] usb 1-1.2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[919385.070874] usb 1-1.2: Product: RIM Composite Device
>[919385.070878] usb 1-1.2: Manufacturer: Research In Motion
>[919385.070881] usb 1-1.2: SerialNumber: AEF25785BBFF17CD09302CFC228B07A5B2B7D244
>[919385.079305] usb-storage 1-1.2:1.1: USB Mass Storage device detected
>[919385.079785] scsi37 : usb-storage 1-1.2:1.1
>[919386.083051] scsi 37:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[919386.084584] sd 37:0:0:0: Attached scsi generic sg11 type 0
>[919386.088456] sd 37:0:0:0: [sdk] Attached SCSI removable disk
>[921716.315340] usb 1-1.2: USB disconnect, device number 15
>[974974.895544] usb 1-1.2: new high-speed USB device number 16 using ehci-pci
>[974974.982187] usb 1-1.2: New USB device found, idVendor=0fca, idProduct=8004
>[974974.982195] usb 1-1.2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[974974.982200] usb 1-1.2: Product: RIM Composite Device
>[974974.982203] usb 1-1.2: Manufacturer: Research In Motion
>[974974.982207] usb 1-1.2: SerialNumber: B202C12FE9E10952B3FC6D5E92BBAB90C5155D1E
>[974974.989988] usb-storage 1-1.2:1.1: USB Mass Storage device detected
>[974974.990144] scsi38 : usb-storage 1-1.2:1.1
>[974975.994115] scsi 38:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[974975.995415] sd 38:0:0:0: Attached scsi generic sg11 type 0
>[974976.000171] sd 38:0:0:0: [sdk] Attached SCSI removable disk
>[1003544.448026] usb 1-1.2: USB disconnect, device number 16
>[1067233.393177] usb 1-1.2: new high-speed USB device number 17 using ehci-pci
>[1067233.479742] usb 1-1.2: New USB device found, idVendor=0fca, idProduct=8004
>[1067233.479749] usb 1-1.2: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[1067233.479753] usb 1-1.2: Product: RIM Composite Device
>[1067233.479757] usb 1-1.2: Manufacturer: Research In Motion
>[1067233.479761] usb 1-1.2: SerialNumber: B202C12FE9E10952B3FC6D5E92BBAB90C5155D1E
>[1067233.487418] usb-storage 1-1.2:1.1: USB Mass Storage device detected
>[1067233.487528] scsi39 : usb-storage 1-1.2:1.1
>[1067234.490961] scsi 39:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[1067234.492044] sd 39:0:0:0: Attached scsi generic sg11 type 0
>[1067234.495146] sd 39:0:0:0: [sdk] Attached SCSI removable disk
>[1096769.097370] usb 1-1.2: USB disconnect, device number 17
>[1107706.115853] polkitd[13815]: segfault at 0 ip b70941ef sp bf8e33b0 error 4 in libmozjs-17.0.so[b6fd9000+3aa000]
>[1149331.831761] usb 1-1.1: new high-speed USB device number 18 using ehci-pci
>[1149331.918353] usb 1-1.1: New USB device found, idVendor=0fca, idProduct=8004
>[1149331.918360] usb 1-1.1: New USB device strings: Mfr=1, Product=5, SerialNumber=3
>[1149331.918364] usb 1-1.1: Product: RIM Composite Device
>[1149331.918368] usb 1-1.1: Manufacturer: Research In Motion
>[1149331.918371] usb 1-1.1: SerialNumber: AEF25785BBFF17CD09302CFC228B07A5B2B7D244
>[1149331.925813] usb-storage 1-1.1:1.1: USB Mass Storage device detected
>[1149331.925979] scsi40 : usb-storage 1-1.1:1.1
>[1149332.929282] scsi 40:0:0:0: Direct-Access     RIM      BlackBerry SD    0003 PQ: 0 ANSI: 4 CCS
>[1149332.930312] sd 40:0:0:0: Attached scsi generic sg11 type 0
>[1149332.932481] sd 40:0:0:0: [sdk] Attached SCSI removable disk
>[1155406.028446] md: data-check of RAID array md3
>[1155406.028452] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[1155406.028454] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[1155406.028466] md: using 128k window, over a total of 209713664k.
>[1155412.201275] md: delaying data-check of md1 until md3 has finished (they share one or more physical units)
>[1155418.231332] md: delaying data-check of md4 until md3 has finished (they share one or more physical units)
>[1155418.231338] md: delaying data-check of md1 until md3 has finished (they share one or more physical units)
>[1155424.258434] md: delaying data-check of md5 until md3 has finished (they share one or more physical units)
>[1155424.258437] md: delaying data-check of md1 until md3 has finished (they share one or more physical units)
>[1155424.258443] md: delaying data-check of md4 until md3 has finished (they share one or more physical units)
>[1155430.288309] md: delaying data-check of md2 until md3 has finished (they share one or more physical units)
>[1155430.288423] md: delaying data-check of md4 until md3 has finished (they share one or more physical units)
>[1155430.288428] md: delaying data-check of md1 until md3 has finished (they share one or more physical units)
>[1155430.288441] md: delaying data-check of md5 until md3 has finished (they share one or more physical units)
>[1155436.317758] md: delaying data-check of md6 until md3 has finished (they share one or more physical units)
>[1155436.318215] md: delaying data-check of md5 until md3 has finished (they share one or more physical units)
>[1155436.318219] md: delaying data-check of md1 until md3 has finished (they share one or more physical units)
>[1155436.318222] md: delaying data-check of md4 until md3 has finished (they share one or more physical units)
>[1155436.319209] md: delaying data-check of md2 until md3 has finished (they share one or more physical units)
>[1155442.357985] md: delaying data-check of md4 until md3 has finished (they share one or more physical units)
>[1155442.357988] md: delaying data-check of md0 until md3 has finished (they share one or more physical units)
>[1155442.357998] md: delaying data-check of md2 until md3 has finished (they share one or more physical units)
>[1155442.358028] md: delaying data-check of md5 until md3 has finished (they share one or more physical units)
>[1155442.358034] md: delaying data-check of md1 until md3 has finished (they share one or more physical units)
>[1155442.358379] md: delaying data-check of md6 until md3 has finished (they share one or more physical units)
>[1157598.776475] md: md3: data-check done.
>[1157598.784319] md: delaying data-check of md6 until md1 has finished (they share one or more physical units)
>[1157598.784323] md: delaying data-check of md1 until md5 has finished (they share one or more physical units)
>[1157598.784326] md: delaying data-check of md5 until md2 has finished (they share one or more physical units)
>[1157598.784333] md: delaying data-check of md2 until md0 has finished (they share one or more physical units)
>[1157598.784342] md: data-check of RAID array md0
>[1157598.784349] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[1157598.784352] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[1157598.784357] md: delaying data-check of md4 until md1 has finished (they share one or more physical units)
>[1157598.784361] md: using 128k window, over a total of 29358592k.
>[1157849.071038] md: md0: data-check done.
>[1157849.074577] md: delaying data-check of md4 until md1 has finished (they share one or more physical units)
>[1157849.074585] md: delaying data-check of md6 until md1 has finished (they share one or more physical units)
>[1157849.074588] md: data-check of RAID array md2
>[1157849.074593] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[1157849.074597] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[1157849.074611] md: using 128k window, over a total of 209713664k.
>[1157849.075883] md: delaying data-check of md5 until md2 has finished (they share one or more physical units)
>[1157849.076796] md: delaying data-check of md1 until md5 has finished (they share one or more physical units)
>[1159800.298192] md: md2: data-check done.
>[1159800.330087] md: delaying data-check of md1 until md5 has finished (they share one or more physical units)
>[1159800.330091] md: delaying data-check of md6 until md1 has finished (they share one or more physical units)
>[1159800.330106] md: data-check of RAID array md5
>[1159800.330110] md: delaying data-check of md4 until md1 has finished (they share one or more physical units)
>[1159800.330113] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[1159800.330116] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[1159800.330125] md: using 128k window, over a total of 137894400k.
>[1161927.870944] md: md5: data-check done.
>[1161927.883079] md: delaying data-check of md4 until md1 has finished (they share one or more physical units)
>[1161927.883089] md: data-check of RAID array md1
>[1161927.883093] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[1161927.883097] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[1161927.883104] md: delaying data-check of md6 until md1 has finished (they share one or more physical units)
>[1161927.883108] md: using 128k window, over a total of 178256384k.
>[1163538.044287] md: md1: data-check done.
>[1163538.047782] md: data-check of RAID array md4
>[1163538.047787] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[1163538.047790] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[1163538.047798] md: delaying data-check of md6 until md4 has finished (they share one or more physical units)
>[1163538.047800] md: using 128k window, over a total of 209713664k.
>[1166155.359668] md: md4: data-check done.
>[1166155.368612] md: data-check of RAID array md6
>[1166155.368619] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>[1166155.368622] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
>[1166155.368632] md: using 128k window, over a total of 2096064k.
>[1166189.750939] md: md6: data-check done.
>[1221774.855089] usb 1-1.1: USB disconnect, device number 18
>[1224451.935993] BUG: Bad page map in process convert  pte:8101050000000d pmd:1c4e83067
>[1224451.935999] addr:b1200060 vm_flags:00100073 anon_vma:e9b43500 mapping:  (null) index:b1200
>[1224451.936003] CPU: 0 PID: 32302 Comm: convert Not tainted 3.12.10-300.fc20.i686+PAE #1
>[1224451.936005] Hardware name: System manufacturer System Product Name/P7P55D LE, BIOS 2003    12/16/2010
>[1224451.936007]  00000000 00000000 c96fde00 c09b06dd cf3e4180 c96fde3c c0532874 c0b61ee8
>[1224451.936012]  b1200060 00100073 e9b43500 00000000 000b1200 00000001 000b1200 00000000
>[1224451.936016]  0000000d f596107c 0000000d 00810105 c96fde64 c053375b 0000000d 00810105
>[1224451.936021] Call Trace:
>[1224451.936030]  [<c09b06dd>] dump_stack+0x41/0x52
>[1224451.936035]  [<c0532874>] print_bad_pte+0x154/0x1f0
>[1224451.936038]  [<c053375b>] vm_normal_page+0x8b/0x90
>[1224451.936040]  [<c05340d6>] do_wp_page+0x36/0x8d0
>[1224451.936045]  [<c044e775>] ? kmap_atomic_prot+0x105/0x160
>[1224451.936048]  [<c05362ba>] handle_mm_fault+0x4ca/0xd00
>[1224451.936052]  [<c09b9ae8>] __do_page_fault+0x188/0x500
>[1224451.936055]  [<c09b45de>] ? __schedule+0x23e/0x6f0
>[1224451.936060]  [<c0416ae8>] ? sched_clock+0x8/0x10
>[1224451.936062]  [<c04838cd>] ? sched_clock_cpu+0xed/0x150
>[1224451.936065]  [<c09b9e60>] ? __do_page_fault+0x500/0x500
>[1224451.936067]  [<c09b9e6d>] do_page_fault+0xd/0x10
>[1224451.936070]  [<c09b6f0b>] error_code+0x67/0x6c
>[1224451.936072] Disabling lock debugging due to kernel taint

Actions: View

Attachments on bug 1089748: 888261