Attachment 893089 Details for Bug 1095076 – File: bert_lspci-vvv.txt

File: bert_lspci-vvv.txt

bert_lspci-vvv.txt (text/plain), 10.63 KB, created by Jason M on 2014-05-07 05:12:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jason M

Created: 2014-05-07 05:12:00 UTC

Size: 10.63 KB

patch

obsolete

>00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11)
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 32
>	Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
>	Region 1: Memory at fb800000 (32-bit, prefetchable) [size=4K]
>	Region 2: I/O ports at e800 [disabled] [size=4]
>	Capabilities: [a0] AGP version 2.0
>		Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
>	Kernel driver in use: agpgart-amdk7
>	Kernel modules: amd76x_edac
>
>00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] AMD-760 MP [IGD4-2P] AGP Bridge (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff
>	Memory behind bridge: bc000000-bedfffff
>	Prefetchable memory behind bridge: bff00000-fb7fffff
>	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>00:07.0 ISA bridge: Advanced Micro Devices, Inc. [AMD] AMD-768 [Opus] ISA (rev 05)
>	Subsystem: ASUSTeK Computer Inc. A7M-D Mainboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>00:07.1 IDE interface: Advanced Micro Devices, Inc. [AMD] AMD-768 [Opus] IDE (rev 04) (prog-if 8a [Master SecP PriP])
>	Subsystem: Advanced Micro Devices, Inc. [AMD] AMD-768 [Opus] IDE
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
>	Region 4: I/O ports at d800 [size=16]
>	Kernel driver in use: pata_amd
>	Kernel modules: pata_amd, pata_acpi, ata_generic
>
>00:07.3 Bridge: Advanced Micro Devices, Inc. [AMD] AMD-768 [Opus] ACPI (rev 03)
>	Subsystem: ASUSTeK Computer Inc. A7M-D Mainboard
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Kernel driver in use: amd756_smbus
>	Kernel modules: amd_rng, i2c_amd756
>
>00:08.0 Ethernet controller: Intel Corporation 82544EI Gigabit Ethernet Controller (Copper) (rev 02)
>	Subsystem: Intel Corporation PRO/1000 XT Server Adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (63750ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at bb800000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at bb000000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at d400 [size=32]
>	[virtual] Expansion ROM at a0000000 [disabled] [size=128K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [e4] PCI-X non-bridge device
>		Command: DPERE- ERO+ RBC=512 OST=1
>		Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
>	Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
>		Address: 0000000000000000  Data: 0000
>	Kernel driver in use: e1000
>	Kernel modules: e1000
>
>00:09.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01)
>	Subsystem: LSI Logic / Symbios Logic MegaRAID 518 SCSI 320-2 Controller
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 21
>	Region 0: Memory at bf000000 (32-bit, prefetchable) [size=64K]
>	[virtual] Expansion ROM at a0020000 [disabled] [size=64K]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: megaraid
>	Kernel modules: megaraid_mbox
>
>00:10.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] AMD-768 [Opus] PCI (rev 05) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 32
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
>	I/O behind bridge: 0000c000-0000cfff
>	Memory behind bridge: b8000000-baffffff
>	Prefetchable memory behind bridge: bee00000-beefffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>01:05.0 VGA compatible controller: NVIDIA Corporation NV44A [GeForce 6200] (rev a1) (prog-if 00 [VGA controller])
>	Subsystem: eVga.com. Corp. Device a403
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 248 (1250ns min, 250ns max)
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at bd000000 (32-bit, non-prefetchable) [size=16M]
>	Region 1: Memory at c0000000 (32-bit, prefetchable) [size=512M]
>	Region 2: Memory at bc000000 (32-bit, non-prefetchable) [size=16M]
>	[virtual] Expansion ROM at bffe0000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [44] AGP version 3.0
>		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>		Command: RQ=16 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
>	Kernel driver in use: nvidia
>	Kernel modules: nouveau, nvidia
>
>02:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8738/CMI8768 PCI Audio (rev 10)
>	Subsystem: ASUSTeK Computer Inc. CMI8738 6-channel audio controller
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (500ns min, 6000ns max)
>	Interrupt: pin A routed to IRQ 17
>	Region 0: I/O ports at c800 [size=256]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: snd_cmipci
>	Kernel modules: snd_cmipci
>
>02:05.0 Mass storage controller: Promise Technology, Inc. PDC20575 (SATAII150 TX2plus) (rev 02)
>	Subsystem: Promise Technology, Inc. PDC20575 (SATAII150 TX2plus)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes
>	Interrupt: pin A routed to IRQ 18
>	Region 0: I/O ports at c400 [size=128]
>	Region 2: I/O ports at c000 [size=256]
>	Region 3: Memory at ba000000 (32-bit, non-prefetchable) [size=4K]
>	Region 4: Memory at b9800000 (32-bit, non-prefetchable) [size=128K]
>	[virtual] Expansion ROM at bee00000 [disabled] [size=32K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: sata_promise
>	Kernel modules: sata_promise
>
>02:06.0 USB controller: NEC Corporation OHCI USB Controller (rev 43) (prog-if 10 [OHCI])
>	Subsystem: NEC Corporation USB Controller
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 17
>	Region 0: Memory at b9000000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: ohci-pci
>
>02:06.1 USB controller: NEC Corporation OHCI USB Controller (rev 43) (prog-if 10 [OHCI])
>	Subsystem: NEC Corporation USB Controller
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 18
>	Region 0: Memory at b8800000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: ohci-pci
>
>02:06.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 04) (prog-if 20 [EHCI])
>	Subsystem: NEC Corporation uPD72010x USB 2.0 Controller
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
>	Interrupt: pin C routed to IRQ 19
>	Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: ehci-pci
>

Actions: View

Attachments on bug 1095076: 893088 | 893089 | 893090 | 893091 | 893092 | 893093 | 893094 | 893095 | 893096 | 893097 | 893098 | 893099