Attachment 896430 Details for Bug 1098567 – File: dmesg

File: dmesg

dmesg (text/plain), 144.27 KB, created by Thom Carlin on 2014-05-16 14:54:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thom Carlin

Created: 2014-05-16 14:54:21 UTC

Size: 144.27 KB

patch

obsolete

>ï»¿[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.14.3-200.fc20.x86_64 (mockbuild@bkernel02) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #1 SMP Tue May 6 19:00:18 UTC 2014
>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.14.3-200.fc20.x86_64 root=/dev/mapper/fedora_<hostname>-root ro rd.lvm.lv=fedora_<hostname>/swap rd.luks.uuid=luks-<uuid> rd.lvm.lv=fedora_<hostname>/root vconsole.font=latarcyrheb-sun16 LANG=en_US.UTF-8
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cb32ffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000cb330000-0x00000000df69efff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000df69f000-0x00000000df79efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000df79f000-0x00000000df7fefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000df7ff000-0x00000000dfffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081dffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: LENOVO 2436CTO/2436CTO, BIOS G5ET98WW (2.58 ) 04/01/2014
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x81e000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
>[    0.000000]   1 base 000000000 mask F80000000 write-back
>[    0.000000]   2 base 080000000 mask FC0000000 write-back
>[    0.000000]   3 base 0C0000000 mask FE0000000 write-back
>[    0.000000]   4 base 0DF800000 mask FFF800000 uncachable
>[    0.000000]   5 base 100000000 mask F00000000 write-back
>[    0.000000]   6 base 200000000 mask E00000000 write-back
>[    0.000000]   7 base 400000000 mask C00000000 write-back
>[    0.000000]   8 base 800000000 mask FE0000000 write-back
>[    0.000000]   9 base 81E000000 mask FFE000000 uncachable
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xcb330 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
>[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x0201c000, 0x0201cfff] PGTABLE
>[    0.000000] BRK [0x0201d000, 0x0201dfff] PGTABLE
>[    0.000000] BRK [0x0201e000, 0x0201efff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x81de00000-0x81dffffff]
>[    0.000000]  [mem 0x81de00000-0x81dffffff] page 2M
>[    0.000000] BRK [0x0201f000, 0x0201ffff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x81c000000-0x81ddfffff]
>[    0.000000]  [mem 0x81c000000-0x81ddfffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x800000000-0x81bffffff]
>[    0.000000]  [mem 0x800000000-0x81bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xcb32ffff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0xcb1fffff] page 2M
>[    0.000000]  [mem 0xcb200000-0xcb32ffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
>[    0.000000]  [mem 0x100000000-0x7ffffffff] page 2M
>[    0.000000] BRK [0x02020000, 0x02020fff] PGTABLE
>[    0.000000] BRK [0x02021000, 0x02021fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x36832000-0x37410fff]
>[    0.000000] ACPI: RSDP 00000000000f0120 000024 (v02 LENOVO)
>[    0.000000] ACPI: XSDT 00000000df7fe170 0000BC (v01 LENOVO TP-G5    00002580 PTL  00000002)
>[    0.000000] ACPI: FACP 00000000df7e6000 00010C (v05 LENOVO TP-G5    00002580 PTL  00000002)
>[    0.000000] ACPI: DSDT 00000000df7e8000 010A7D (v01 LENOVO TP-G5    00002580 INTL 20061109)
>[    0.000000] ACPI: FACS 00000000df754000 000040
>[    0.000000] ACPI: SLIC 00000000df7fd000 000176 (v01 LENOVO TP-G5    00002580 PTL  00000001)
>[    0.000000] ACPI: TCPA 00000000df7fc000 000032 (v02    PTL   LENOVO 06040000 LNVO 00000001)
>[    0.000000] ACPI: SSDT 00000000df7fb000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
>[    0.000000] ACPI: SSDT 00000000df7fa000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
>[    0.000000] ACPI: SSDT 00000000df7f9000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
>[    0.000000] ACPI: HPET 00000000df7e4000 000038 (v01 LENOVO TP-G5    00002580 PTL  00000002)
>[    0.000000] ACPI: APIC 00000000df7e3000 000098 (v01 LENOVO TP-G5    00002580 PTL  00000002)
>[    0.000000] ACPI: MCFG 00000000df7e2000 00003C (v01 LENOVO TP-G5    00002580 PTL  00000002)
>[    0.000000] ACPI: ECDT 00000000df7e1000 000052 (v01 LENOVO TP-G5    00002580 PTL  00000002)
>[    0.000000] ACPI: FPDT 00000000df7e0000 000064 (v01 LENOVO TP-G5    00002580 PTL  00000002)
>[    0.000000] ACPI: ASF! 00000000df7e7000 0000A5 (v32 LENOVO TP-G5    00002580 PTL  00000002)
>[    0.000000] ACPI: UEFI 00000000df7df000 00003E (v01 LENOVO TP-G5    00002580 PTL  00000002)
>[    0.000000] ACPI: UEFI 00000000df7de000 000042 (v01 PTL      COMBUF 00000001 PTL  00000001)
>[    0.000000] ACPI: POAT 00000000df7dd000 000055 (v03 LENOVO TP-G5    00002580 PTL  00000002)
>[    0.000000] ACPI: SSDT 00000000df7dc000 000D23 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
>[    0.000000] ACPI: SSDT 00000000df7db000 000A83 (v01  PmRef    CpuPm 00003000 INTL 20061109)
>[    0.000000] ACPI: UEFI 00000000df7da000 0002A6 (v01 LENOVO TP-G5    00002580 PTL  00000002)
>[    0.000000] ACPI: DBG2 00000000df7d9000 0000E9 (v00 LENOVO TP-G5    00002580 PTL  00000002)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000081dffffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x81dffffff]
>[    0.000000]   NODE_DATA [mem 0x81dfce000-0x81dfe1fff]
>[    0.000000]  [ffffea0000000000-ffffea00207fffff] PMD -> [ffff8807fda00000-ffff88081d5fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x81dffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
>[    0.000000]   node   0: [mem 0x00100000-0xcb32ffff]
>[    0.000000]   node   0: [mem 0x100000000-0x81dffffff]
>[    0.000000] On node 0 totalpages: 8295116
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 12941 pages used for memmap
>[    0.000000]   DMA32 zone: 828208 pages, LIFO batch:31
>[    0.000000]   Normal zone: 116608 pages used for memmap
>[    0.000000]   Normal zone: 7462912 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xcb330000-0xdf69efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdf69f000-0xdf79efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdf79f000-0xdf7fefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdf7ff000-0xdfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
>[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88081dc00000 s86848 r8192 d23744 u262144
>[    0.000000] pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8165482
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.14.3-200.fc20.x86_64 root=/dev/mapper/fedora_<hostname>-root ro rd.lvm.lv=fedora_<hostname>/swap rd.luks.uuid=luks-4b4a7f64-0421-4802-9cfc-e72d90bdefda rd.lvm.lv=fedora_<hostname>/root vconsole.font=latarcyrheb-sun16 LANG=en_US.UTF-8
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Memory: 32564068K/33180464K available (7182K kernel code, 1079K rwdata, 3044K rodata, 1448K init, 1644K bss, 616396K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:65792 nr_irqs:744 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] allocated 133169152 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2693.763 MHz processor
>[    0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.52 BogoMIPS (lpj=2693763)
>[    0.000297] pid_max: default: 32768 minimum: 301
>[    0.000432] ACPI: Core revision 20131218
>[    0.006404] ACPI: All ACPI Tables successfully acquired
>[    0.008192] Security Framework initialized
>[    0.008339] SELinux:  Initializing.
>[    0.008477] SELinux:  Starting in permissive mode
>[    0.010697] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
>[    0.018367] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.021807] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.021989] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.022433] Initializing cgroup subsys memory
>[    0.022588] Initializing cgroup subsys devices
>[    0.022728] Initializing cgroup subsys freezer
>[    0.022858] Initializing cgroup subsys net_cls
>[    0.022987] Initializing cgroup subsys blkio
>[    0.023115] Initializing cgroup subsys perf_event
>[    0.023247] Initializing cgroup subsys hugetlb
>[    0.023400] CPU: Physical Processor ID: 0
>[    0.023547] CPU: Processor Core ID: 0
>[    0.023687] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.024214] mce: CPU supports 9 MCE banks
>[    0.024362] CPU0: Thermal monitoring enabled (TM1)
>[    0.024508] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>tlb_flushall_shift: 2
>[    0.024869] Freeing SMP alternatives memory: 24K (ffffffff81e79000 - ffffffff81e7f000)
>[    0.026447] ftrace: allocating 26319 entries in 103 pages
>[    0.038529] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.048825] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (fam: 06, model: 3a, stepping: 09)
>[    0.054785] TSC deadline timer enabled
>[    0.054793] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
>[    0.055602] ... version:                3
>[    0.055872] ... bit width:              48
>[    0.056142] ... generic registers:      4
>[    0.056410] ... value mask:             0000ffffffffffff
>[    0.056678] ... max period:             0000ffffffffffff
>[    0.056949] ... fixed-purpose events:   3
>[    0.057219] ... event mask:             000000070000000f
>[    0.058573] x86: Booting SMP configuration:
>[    0.058850] .... node  #0, CPUs:      #1
>[    0.072668] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.073485]  #2 #3 #4 #5 #6 #7
>[    0.155370] x86: Booted up 1 node, 8 CPUs
>[    0.155916] smpboot: Total of 8 processors activated (43100.20 BogoMIPS)
>[    0.162830] devtmpfs: initialized
>[    0.167488] PM: Registering ACPI NVS region [mem 0xdf69f000-0xdf79efff] (1048576 bytes)
>[    0.168677] atomic64 test passed for x86-64 platform with CX8 and with SSE
>[    0.168961] pinctrl core: initialized pinctrl subsystem
>[    0.169270] RTC time: 21:02:01, date: 05/13/14
>[    0.169581] NET: Registered protocol family 16
>[    0.169943] cpuidle: using governor menu
>[    0.170267] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.170746] ACPI: bus type PCI registered
>[    0.171016] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.171481] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.171963] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.175878] PCI: Using configuration type 1 for base access
>[    0.177564] bio: create slab <bio-0> at 0
>[    0.177938] ACPI: Added _OSI(Module Device)
>[    0.178217] ACPI: Added _OSI(Processor Device)
>[    0.178489] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.178761] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.180274] ACPI : EC: EC description table is found, configuring boot EC
>[    0.184115] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.202137] ACPI: SSDT 00000000df63a018 000A01 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
>[    0.203061] ACPI: Dynamic OEM Table Load:
>[    0.203469] ACPI: SSDT           (null) 000A01 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
>[    0.209019] ACPI: SSDT 00000000df63ba98 000303 (v01  PmRef    ApIst 00003000 INTL 20061109)
>[    0.209965] ACPI: Dynamic OEM Table Load:
>[    0.210371] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20061109)
>[    0.216069] ACPI: SSDT 00000000df639d98 000119 (v01  PmRef    ApCst 00003000 INTL 20061109)
>[    0.216987] ACPI: Dynamic OEM Table Load:
>[    0.217396] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20061109)
>[    0.223992] ACPI: Interpreter enabled
>[    0.224276] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
>[    0.224890] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
>[    0.225499] ACPI: (supports S0 S3 S4 S5)
>[    0.225779] ACPI: Using IOAPIC for interrupt routing
>[    0.226067] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.227381] ACPI: ACPI Dock Station Driver: 2 docks/bays found
>[    0.235117] ACPI: Power Resource [PUBS] (on)
>[    0.239675] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.240653] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
>[    0.241628] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.242609] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
>[    0.243581] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11)
>[    0.244548] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>[    0.245851] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.246824] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
>[    0.247758] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
>[    0.248044] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.248598] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
>[    0.248917] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
>[    0.249403] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
>[    0.249877] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
>[    0.250347] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
>[    0.250762] PCI host bridge to bus 0000:00
>[    0.251043] pci_bus 0000:00: root bus resource [bus 00-3f]
>[    0.251314] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.251584] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.251858] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.252130] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
>[    0.252404] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
>[    0.252682] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
>[    0.252750] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
>[    0.252780] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.252860] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
>[    0.252883] pci 0000:00:14.0: reg 0x10: [mem 0xf5320000-0xf532ffff 64bit]
>[    0.252952] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.252977] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.253295] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
>[    0.253318] pci 0000:00:16.0: reg 0x10: [mem 0xf5335000-0xf533500f 64bit]
>[    0.253392] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.253452] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
>[    0.253471] pci 0000:00:16.3: reg 0x10: [io  0x6070-0x6077]
>[    0.253480] pci 0000:00:16.3: reg 0x14: [mem 0xf533c000-0xf533cfff]
>[    0.253603] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>[    0.253621] pci 0000:00:19.0: reg 0x10: [mem 0xf5300000-0xf531ffff]
>[    0.253629] pci 0000:00:19.0: reg 0x14: [mem 0xf533b000-0xf533bfff]
>[    0.253638] pci 0000:00:19.0: reg 0x18: [io  0x6040-0x605f]
>[    0.253698] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.253722] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.254036] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
>[    0.254057] pci 0000:00:1a.0: reg 0x10: [mem 0xf533a000-0xf533a3ff]
>[    0.254144] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.254171] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.254489] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
>[    0.254504] pci 0000:00:1b.0: reg 0x10: [mem 0xf5330000-0xf5333fff 64bit]
>[    0.254576] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.254605] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.254922] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
>[    0.255057] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.255128] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
>[    0.255261] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.255331] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
>[    0.255463] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.255501] pci 0000:00:1c.2: System wakeup disabled by ACPI
>[    0.255824] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
>[    0.255844] pci 0000:00:1d.0: reg 0x10: [mem 0xf5339000-0xf53393ff]
>[    0.255932] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.255958] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.256277] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
>[    0.256430] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
>[    0.256447] pci 0000:00:1f.2: reg 0x10: [io  0x6068-0x606f]
>[    0.256455] pci 0000:00:1f.2: reg 0x14: [io  0x607c-0x607f]
>[    0.256463] pci 0000:00:1f.2: reg 0x18: [io  0x6060-0x6067]
>[    0.256471] pci 0000:00:1f.2: reg 0x1c: [io  0x6078-0x607b]
>[    0.256479] pci 0000:00:1f.2: reg 0x20: [io  0x6020-0x603f]
>[    0.256486] pci 0000:00:1f.2: reg 0x24: [mem 0xf5338000-0xf53387ff]
>[    0.256529] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.256582] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
>[    0.256597] pci 0000:00:1f.3: reg 0x10: [mem 0xf5334000-0xf53340ff 64bit]
>[    0.256617] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.256725] pci 0000:01:00.0: [10de:0ffc] type 00 class 0x030000
>[    0.256735] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
>[    0.256745] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.256755] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
>[    0.256763] pci 0000:01:00.0: reg 0x24: [io  0x5000-0x507f]
>[    0.256770] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
>[    0.256856] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
>[    0.256866] pci 0000:01:00.1: reg 0x10: [mem 0xf3000000-0xf3003fff]
>[    1.259965] pci 0000:00:01.0: ASPM: Could not configure common clock
>[    1.260278] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    1.260550] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
>[    1.260552] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf30fffff]
>[    1.260555] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
>[    1.260717] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001
>[    1.260736] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[    1.261088] pci 0000:02:00.0: reg 0x10: [mem 0xf4a01000-0xf4a010ff]
>[    1.261311] pci 0000:02:00.0: supports D1 D2
>[    1.261312] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    1.261451] pci 0000:02:00.3: [1180:e832] type 00 class 0x0c0010
>[    1.261478] pci 0000:02:00.3: reg 0x10: [mem 0xf4a00000-0xf4a007ff]
>[    1.261688] pci 0000:02:00.3: supports D1 D2
>[    1.261689] pci 0000:02:00.3: PME# supported from D0 D1 D2 D3hot D3cold
>[    1.263144] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    1.263425] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
>[    1.263430] pci 0000:00:1c.0:   bridge window [mem 0xf4a00000-0xf52fffff]
>[    1.263438] pci 0000:00:1c.0:   bridge window [mem 0xf3100000-0xf38fffff 64bit pref]
>[    1.263665] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
>[    1.263813] pci 0000:03:00.0: reg 0x10: [mem 0xf4900000-0xf4901fff 64bit]
>[    1.264604] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>[    1.266142] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    1.266429] pci 0000:00:1c.1:   bridge window [mem 0xf4900000-0xf49fffff]
>[    1.266539] acpiphp: Slot [1] registered
>[    1.266823] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
>[    1.267110] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
>[    1.267115] pci 0000:00:1c.2:   bridge window [mem 0xf4100000-0xf48fffff]
>[    1.267122] pci 0000:00:1c.2:   bridge window [mem 0xf3900000-0xf40fffff 64bit pref]
>[    1.267836] ACPI: Enabled 4 GPEs in block 00 to 3F
>[    1.268295] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
>[    1.268656] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    1.269130] vgaarb: loaded
>[    1.269399] vgaarb: bridge control possible 0000:01:00.0
>[    1.269722] SCSI subsystem initialized
>[    1.270032] libata version 3.00 loaded.
>[    1.270053] ACPI: bus type USB registered
>[    1.270345] usbcore: registered new interface driver usbfs
>[    1.270632] usbcore: registered new interface driver hub
>[    1.270926] usbcore: registered new device driver usb
>[    1.271257] PCI: Using ACPI for IRQ routing
>[    1.273196] PCI: pci_cache_line_size set to 64 bytes
>[    1.273405] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
>[    1.273406] e820: reserve RAM buffer [mem 0xcb330000-0xcbffffff]
>[    1.273407] e820: reserve RAM buffer [mem 0x81e000000-0x81fffffff]
>[    1.273481] NetLabel: Initializing
>[    1.273761] NetLabel:  domain hash size = 128
>[    1.274030] NetLabel:  protocols = UNLABELED CIPSOv4
>[    1.274308] NetLabel:  unlabeled traffic allowed by default
>[    1.274626] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    1.275480] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    1.277776] Switched to clocksource hpet
>[    1.282853] pnp: PnP ACPI init
>[    1.283143] ACPI: bus type PNP registered
>[    1.283754] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>[    1.284044] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
>[    1.284326] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
>[    1.284599] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
>[    1.284876] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
>[    1.285153] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
>[    1.285426] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
>[    1.285698] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
>[    1.285976] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
>[    1.286250] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
>[    1.286524] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
>[    1.286801] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
>[    1.287076] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
>[    1.287349] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
>[    1.287621] system 00:00: [mem 0x00100000-0xdfffffff] could not be reserved
>[    1.287897] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
>[    1.288174] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
>[    1.288449] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    1.288518] pnp 00:01: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
>[    1.289033] system 00:01: [io  0x0400-0x047f] could not be reserved
>[    1.289314] system 00:01: [io  0x0500-0x057f] has been reserved
>[    1.289585] system 00:01: [io  0x0800-0x080f] has been reserved
>[    1.289863] system 00:01: [io  0x15e0-0x15ef] has been reserved
>[    1.290146] system 00:01: [io  0x1600-0x167f] has been reserved
>[    1.290418] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
>[    1.290691] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    1.290969] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
>[    1.291243] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>[    1.291516] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>[    1.291792] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
>[    1.292066] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.292112] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
>[    1.292119] pnp 00:03: [dma 4]
>[    1.292134] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>[    1.292151] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>[    1.292180] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    1.292203] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    1.292229] pnp 00:07: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
>[    1.292253] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
>[    1.292291] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
>[    1.292939] pnp: PnP ACPI: found 10 devices
>[    1.293665] ACPI: bus type PNP unregistered
>[    1.300648] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
>[    1.301197] pci 0000:01:00.0: BAR 6: assigned [mem 0xf3080000-0xf30fffff pref]
>[    1.301678] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    1.301973] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
>[    1.302256] pci 0000:00:01.0:   bridge window [mem 0xf2000000-0xf30fffff]
>[    1.302529] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
>[    1.303021] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    1.303296] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
>[    1.303573] pci 0000:00:1c.0:   bridge window [mem 0xf4a00000-0xf52fffff]
>[    1.303872] pci 0000:00:1c.0:   bridge window [mem 0xf3100000-0xf38fffff 64bit pref]
>[    1.304360] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    1.304642] pci 0000:00:1c.1:   bridge window [mem 0xf4900000-0xf49fffff]
>[    1.304945] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
>[    1.305226] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
>[    1.305502] pci 0000:00:1c.2:   bridge window [mem 0xf4100000-0xf48fffff]
>[    1.305788] pci 0000:00:1c.2:   bridge window [mem 0xf3900000-0xf40fffff 64bit pref]
>[    1.311347] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    1.311348] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    1.311350] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    1.311351] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
>[    1.311353] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
>[    1.311354] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
>[    1.311355] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf30fffff]
>[    1.311357] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
>[    1.311359] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
>[    1.311360] pci_bus 0000:02: resource 1 [mem 0xf4a00000-0xf52fffff]
>[    1.311361] pci_bus 0000:02: resource 2 [mem 0xf3100000-0xf38fffff 64bit pref]
>[    1.311363] pci_bus 0000:03: resource 1 [mem 0xf4900000-0xf49fffff]
>[    1.311364] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
>[    1.311366] pci_bus 0000:04: resource 1 [mem 0xf4100000-0xf48fffff]
>[    1.311367] pci_bus 0000:04: resource 2 [mem 0xf3900000-0xf40fffff 64bit pref]
>[    1.311396] NET: Registered protocol family 2
>[    1.311936] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>[    1.312783] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    1.313178] TCP: Hash tables configured (established 262144 bind 65536)
>[    1.313473] TCP: reno registered
>[    1.313789] UDP hash table entries: 16384 (order: 7, 524288 bytes)
>[    1.314163] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
>[    1.314551] NET: Registered protocol family 1
>[    1.315244] pci 0000:01:00.0: Boot video device
>[    1.315332] PCI: CLS 64 bytes, default 64
>[    1.315378] Unpacking initramfs...
>[    1.474939] Freeing initrd memory: 12156K (ffff880036832000 - ffff880037411000)
>[    1.475424] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    1.475697] software IO TLB [mem 0xc7330000-0xcb330000] (64MB) mapped at [ffff8800c7330000-ffff8800cb32ffff]
>[    1.476509] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
>[    1.477617] AVX version of gcm_enc/dec engaged.
>[    1.479580] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
>[    1.480279] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    1.480578] Initialise system trusted keyring
>[    1.480950] audit: initializing netlink subsys (disabled)
>[    1.481246] audit: type=2000 audit(1400014922.446:1): initialized
>[    1.502240] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.503584] zbud: loaded
>[    1.504038] VFS: Disk quotas dquot_6.5.2
>[    1.504348] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.504945] msgmni has been set to 32768
>[    1.505267] Key type big_key registered
>[    1.505546] SELinux:  Registering netfilter hooks
>[    1.506480] alg: No test for stdrng (krng)
>[    1.506810] NET: Registered protocol family 38
>[    1.507090] Key type asymmetric registered
>[    1.507358] Asymmetric key parser 'x509' registered
>[    1.507653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    1.508211] io scheduler noop registered
>[    1.508489] io scheduler deadline registered
>[    1.508820] io scheduler cfq registered (default)
>[    1.509247] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>[    1.509628] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.509986] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    1.510295] intel_idle: MWAIT substates: 0x21120
>[    1.510296] intel_idle: v0.4 model 0x3A
>[    1.510297] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    1.794604] ACPI: AC Adapter [AC] (on-line)
>[    1.795210] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>[    2.295190] ACPI: Lid Switch [LID]
>[    2.295533] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
>[    2.296015] ACPI: Sleep Button [SLPB]
>[    2.296324] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    2.296811] ACPI: Power Button [PWRF]
>[    2.299352] thermal LNXTHERM:00: registered as thermal_zone0
>[    2.299663] ACPI: Thermal Zone [THM0] (54 C)
>[    2.299962] GHES: HEST is not enabled!
>[    2.300461] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    2.308949] ACPI: Battery Slot [BAT0] (battery present)
>[    2.316451] ACPI: Battery Slot [BAT1] (battery present)
>[    2.322368] 0000:00:16.3: ttyS0 at I/O 0x6070 (irq = 19, base_baud = 115200) is a 16550A
>[    2.323224] Non-volatile memory driver v1.3
>[    2.323525] Linux agpgart interface v0.103
>[    2.323903] ahci 0000:00:1f.2: version 3.0
>[    2.323985] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
>[    2.324005] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    2.334476] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
>[    2.334960] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst 
>[    2.341908] scsi0 : ahci
>[    2.342296] scsi1 : ahci
>[    2.342671] scsi2 : ahci
>[    2.343105] scsi3 : ahci
>[    2.343534] scsi4 : ahci
>[    2.343965] scsi5 : ahci
>[    2.344281] ata1: SATA max UDMA/133 abar m2048@0xf5338000 port 0xf5338100 irq 41
>[    2.344769] ata2: SATA max UDMA/133 abar m2048@0xf5338000 port 0xf5338180 irq 41
>[    2.345249] ata3: SATA max UDMA/133 abar m2048@0xf5338000 port 0xf5338200 irq 41
>[    2.345724] ata4: DUMMY
>[    2.345991] ata5: SATA max UDMA/133 abar m2048@0xf5338000 port 0xf5338300 irq 41
>[    2.346465] ata6: DUMMY
>[    2.346790] libphy: Fixed MDIO Bus: probed
>[    2.347283] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.347715] ehci-pci: EHCI PCI platform driver
>[    2.348079] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    2.348430] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    2.348944] ehci-pci 0000:00:1a.0: debug port 2
>[    2.353115] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    2.353127] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf533a000
>[    2.358447] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    2.358757] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.359039] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.359516] usb usb1: Product: EHCI Host Controller
>[    2.359796] usb usb1: Manufacturer: Linux 3.14.3-200.fc20.x86_64 ehci_hcd
>[    2.360068] usb usb1: SerialNumber: 0000:00:1a.0
>[    2.360481] hub 1-0:1.0: USB hub found
>[    2.360762] hub 1-0:1.0: 3 ports detected
>[    2.361201] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    2.361565] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    2.362054] ehci-pci 0000:00:1d.0: debug port 2
>[    2.366234] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    2.366246] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf5339000
>[    2.372440] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    2.372744] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.373026] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.373501] usb usb2: Product: EHCI Host Controller
>[    2.373773] usb usb2: Manufacturer: Linux 3.14.3-200.fc20.x86_64 ehci_hcd
>[    2.374046] usb usb2: SerialNumber: 0000:00:1d.0
>[    2.374438] hub 2-0:1.0: USB hub found
>[    2.374722] hub 2-0:1.0: 3 ports detected
>[    2.375092] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    2.375375] ohci-pci: OHCI PCI platform driver
>[    2.375676] uhci_hcd: USB Universal Host Controller Interface driver
>[    2.376036] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    2.376386] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    2.376975] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    2.376994] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
>[    2.377048] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.377330] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.377827] usb usb3: Product: xHCI Host Controller
>[    2.378104] usb usb3: Manufacturer: Linux 3.14.3-200.fc20.x86_64 xhci_hcd
>[    2.378377] usb usb3: SerialNumber: 0000:00:14.0
>[    2.378784] hub 3-0:1.0: USB hub found
>[    2.379071] hub 3-0:1.0: 4 ports detected
>[    2.379663] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    2.380009] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>[    2.380542] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.380822] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.381289] usb usb4: Product: xHCI Host Controller
>[    2.381583] usb usb4: Manufacturer: Linux 3.14.3-200.fc20.x86_64 xhci_hcd
>[    2.381854] usb usb4: SerialNumber: 0000:00:14.0
>[    2.382234] hub 4-0:1.0: USB hub found
>[    2.382543] hub 4-0:1.0: 4 ports detected
>[    2.383170] usbcore: registered new interface driver usbserial
>[    2.383467] usbcore: registered new interface driver usbserial_generic
>[    2.383751] usbserial: USB Serial support registered for generic
>[    2.384045] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>[    2.386323] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.386635] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    2.387016] mousedev: PS/2 mouse device common for all mice
>[    2.387532] rtc_cmos 00:06: RTC can wake from S4
>[    2.388058] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>[    2.388406] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    2.388871] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    2.389582] device-mapper: uevent: version 1.0.3
>[    2.389983] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
>[    2.390614] Intel P-state driver initializing.
>[    2.390910] Intel pstate controlling: cpu 0
>[    2.391209] Intel pstate controlling: cpu 1
>[    2.391524] Intel pstate controlling: cpu 2
>[    2.391850] Intel pstate controlling: cpu 3
>[    2.392143] Intel pstate controlling: cpu 4
>[    2.392434] Intel pstate controlling: cpu 5
>[    2.392729] Intel pstate controlling: cpu 6
>[    2.393082] Intel pstate controlling: cpu 7
>[    2.393808] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.394154] usbcore: registered new interface driver usbhid
>[    2.394445] usbhid: USB HID core driver
>[    2.394742] drop_monitor: Initializing network drop monitor service
>[    2.395073] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    2.395450] TCP: cubic registered
>[    2.395729] Initializing XFRM netlink socket
>[    2.396117] NET: Registered protocol family 10
>[    2.396648] mip6: Mobile IPv6
>[    2.396965] NET: Registered protocol family 17
>[    2.397841] Loading compiled-in X.509 certificates
>[    2.398902] Loaded X.509 cert 'Fedora kernel signing key: 411bda28a3942fa09cb64aed251d19eb1d1085b7'
>[    2.399452] registered taskstats version 1
>[    2.400440]   Magic number: 14:160:45
>[    2.400762] memory memory210: hash matches
>[    2.401134] rtc_cmos 00:06: setting system clock to 2014-05-13 21:02:03 UTC (1400014923)
>[    2.406772] PM: Hibernation image not present or could not be loaded.
>[    2.476488] tsc: Refined TSC clocksource calibration: 2693.881 MHz
>[    2.651467] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.652874] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[    2.652880] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    2.654493] ata1.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133
>[    2.654800] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    2.656295] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[    2.656302] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    2.657902] ata1.00: configured for UDMA/133
>[    2.658539] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS725050A7 GH2Z PQ: 0 ANSI: 5
>[    2.659359] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>[    2.659513] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.660385] sd 0:0:0:0: [sda] 4096-byte physical blocks
>[    2.660736] sd 0:0:0:0: [sda] Write Protect is off
>[    2.661031] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.661057] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.662462] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    2.710228]  sda: sda1 sda2
>[    2.711162] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.776969] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    2.777268] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.778072] hub 1-1:1.0: USB hub found
>[    2.778459] hub 1-1:1.0: 6 ports detected
>[    2.882316] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    2.964321] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    2.975659] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[    2.981950] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[    2.987770] ata2.00: ATAPI: PLDS DVD-RW DS8A8SH, KU54, max UDMA/100
>[    2.996651] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    2.996956] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.997747] hub 2-1:1.0: USB hub found
>[    2.998160] hub 2-1:1.0: 8 ports detected
>[    3.000726] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[    3.001513] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[    3.001819] ata2.00: configured for UDMA/100
>[    3.015308] scsi 1:0:0:0: CD-ROM            PLDS     DVD-RW DS8A8SH   KU54 PQ: 0 ANSI: 5
>[    3.037305] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    3.037817] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    3.038438] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    3.038625] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    3.153331] usb 3-2: new full-speed USB device number 2 using xhci_hcd
>[    3.205401] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
>[    3.205924] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
>[    3.246282] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
>[    3.323684] usb 3-2: New USB device found, idVendor=045e, idProduct=0745
>[    3.323990] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.324355] usb 3-2: Product: MicrosoftÂ® Nano Transceiver v2.0
>[    3.324648] usb 3-2: Manufacturer: Microsoft
>[    3.328745] input: Microsoft MicrosoftÂ® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:045E:0745.0001/input/input7
>[    3.329652] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft MicrosoftÂ® Nano Transceiver v2.0] on usb-0000:00:14.0-2/input0
>[    3.336233] input: Microsoft MicrosoftÂ® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:045E:0745.0002/input/input8
>[    3.337295] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft MicrosoftÂ® Nano Transceiver v2.0] on usb-0000:00:14.0-2/input1
>[    3.343205] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    3.343850] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[    3.343861] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    3.344998] ata3.00: ATA-9: SanDisk SSD U100 16GB, 10.56.01, max UDMA/133
>[    3.345368] ata3.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    3.346072] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[    3.346080] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    3.346851] ata3.00: configured for UDMA/133
>[    3.347454] scsi 2:0:0:0: Direct-Access     ATA      SanDisk SSD U100 10.5 PQ: 0 ANSI: 5
>[    3.348396] sd 2:0:0:0: Attached scsi generic sg2 type 0
>[    3.348496] sd 2:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
>[    3.349237] sd 2:0:0:0: [sdb] Write Protect is off
>[    3.349241] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    3.349495] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.350898]  sdb: sdb1
>[    3.351831] sd 2:0:0:0: [sdb] Attached SCSI disk
>[    3.354218] input: Microsoft MicrosoftÂ® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:045E:0745.0003/input/input9
>[    3.355214] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft MicrosoftÂ® Nano Transceiver v2.0] on usb-0000:00:14.0-2/input2
>[    3.429397] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
>[    3.476478] Switched to clocksource tsc
>[    3.510874] usb 1-1.1: New USB device found, idVendor=17ef, idProduct=1003
>[    3.511190] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.511684] usb 1-1.1: Product: Integrated Smart Card Reader
>[    3.511992] usb 1-1.1: Manufacturer: Lenovo
>[    3.586216] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
>[    3.656123] ata5: SATA link down (SStatus 0 SControl 300)
>[    3.658193] Freeing unused kernel memory: 1448K (ffffffff81d0f000 - ffffffff81e79000)
>[    3.658705] Write protecting the kernel read-only data: 12288k
>[    3.663800] Freeing unused kernel memory: 1000K (ffff880001706000 - ffff880001800000)
>[    3.668754] Freeing unused kernel memory: 1052K (ffff880001af9000 - ffff880001c00000)
>[    3.672165] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
>[    3.672464] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.672953] usb 1-1.3: Product: Biometric Coprocessor
>[    3.673258] usb 1-1.3: Manufacturer: Auth
>[    3.674352] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    3.674977] systemd[1]: Running in initial RAM disk.
>[    3.676420] systemd[1]: Set hostname to <hostname>.
>[    3.677356] random: systemd urandom read with 60 bits of entropy available
>[    3.728288] systemd[1]: Expecting device dev-mapper-fedora_<hostname>\x2droot.device...
>[    3.729438] systemd[1]: Starting -.slice.
>[    3.730680] systemd[1]: Created slice -.slice.
>[    3.731036] systemd[1]: Starting System Slice.
>[    3.732182] systemd[1]: Created slice System Slice.
>[    3.732490] systemd[1]: Starting Slices.
>[    3.733496] systemd[1]: Reached target Slices.
>[    3.733829] systemd[1]: Starting Timers.
>[    3.734838] systemd[1]: Reached target Timers.
>[    3.735148] systemd[1]: Starting Journal Socket.
>[    3.736147] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
>[    3.736475] systemd[1]: Listening on Journal Socket.
>[    3.736936] systemd[1]: Starting dracut cmdline hook...
>[    3.738191] systemd[1]: Starting Journal Service...
>[    3.740170] systemd[1]: Started Journal Service.
>[    3.824728] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[    3.824729] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.824731] usb 1-1.4: Product: BCM20702A0
>[    3.824732] usb 1-1.4: Manufacturer: Broadcom Corp
>[    3.824733] usb 1-1.4: SerialNumber: 40F02F07423F
>[    3.898109] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
>[    3.904589] systemd-udevd[258]: starting version 208
>[    3.938385] ACPI: Video Device [VID1] (multi-head: yes  rom: yes  post: no)
>[    3.941079] acpi device:0b: registered as cooling_device8
>[    3.941523] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input10
>[    3.953539] wmi: Mapper loaded
>[    3.966525] [drm] Initialized drm 1.1.0 20060810
>[    3.980672] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2
>[    3.981020] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.981513] usb 1-1.6: Product: Integrated Camera
>[    3.981799] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
>[    3.988564] alg: No test for crc32 (crc32-pclmul)
>[    4.004158] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
>[    4.005282] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
>[    4.006205] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
>[    4.006692] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG_.VID_ handle
>[    4.007578] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0e73c0a2
>[    4.007852] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
>[    4.008131] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
>[    4.009741] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
>[    4.010044] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
>[    4.010342] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
>[    4.010645] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
>[    4.010921] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
>[    4.024994] firewire_ohci 0000:02:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
>[    4.125552] random: nonblocking pool is initialized
>[    4.227343] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
>[    4.227649] nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
>[    4.228244] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
>[    4.228542] nouveau  [   VBIOS][0000:01:00.0] version 80.07.33.00.0f
>[    4.229611] nouveau 0000:01:00.0: irq 43 for MSI/MSI-X
>[    4.229633] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
>[    4.230018] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
>[    4.230532] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
>[    4.231077] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
>[    4.238657] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 875000uv
>[    4.266735] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
>[    4.267260] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
>[    4.267773] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
>[    4.268313] nouveau  [     CLK][0000:01:00.0] 07: core 270-405 MHz memory 810 MHz 
>[    4.269274] nouveau  [     CLK][0000:01:00.0] 0f: core 270-850 MHz memory 1800 MHz 
>[    4.270330] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz memory 648 MHz 
>[    4.314246] [TTM] Zone  kernel: Available graphics memory: 16289874 kiB
>[    4.314766] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[    4.315285] [TTM] Initializing pool allocator
>[    4.315834] [TTM] Initializing DMA pool allocator
>[    4.316359] nouveau  [     DRM] VRAM: 2048 MiB
>[    4.316872] nouveau  [     DRM] GART: 1048576 MiB
>[    4.317384] nouveau  [     DRM] TMDS table version 2.0
>[    4.317896] nouveau  [     DRM] DCB version 4.0
>[    4.318403] nouveau  [     DRM] DCB outp 00: 01800f23 00010034
>[    4.318938] nouveau  [     DRM] DCB outp 01: 02811f00 00000000
>[    4.319448] nouveau  [     DRM] DCB outp 02: 02822fa6 0f420010
>[    4.319961] nouveau  [     DRM] DCB outp 03: 02822f62 00020010
>[    4.320470] nouveau  [     DRM] DCB outp 04: 04833fb6 0f220010
>[    4.320983] nouveau  [     DRM] DCB outp 05: 04833f72 00020010
>[    4.321520] nouveau  [     DRM] DCB outp 06: 08844fc6 0f220010
>[    4.322032] nouveau  [     DRM] DCB outp 07: 08844f82 00020010
>[    4.322542] nouveau  [     DRM] DCB conn 00: 00000040
>[    4.323145] nouveau  [     DRM] DCB conn 01: 00000100
>[    4.323767] nouveau  [     DRM] DCB conn 02: 00010246
>[    4.324396] nouveau  [     DRM] DCB conn 03: 00020346
>[    4.324999] nouveau  [     DRM] DCB conn 04: 01000446
>[    4.327047] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    4.327565] [drm] Driver supports precise vblank timestamp query.
>[    4.328081] nouveau  [     DRM] ACPI backlight interface available, not registering our own
>[    4.340853] nouveau  [     DRM] MM: using COPY for buffer copies
>[    4.518322] nouveau  [     DRM] allocated 1920x1080 fb: 0x80000, bo ffff8807ee486000
>[    4.519354] fbcon: nouveaufb (fb0) is primary device
>[    4.525853] firewire_core 0000:02:00.3: created device fw0: GUID 3c970effebada2ff, S400
>[    5.331005] Console: switching to colour frame buffer device 240x67
>[    5.333599] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
>[    5.333600] nouveau 0000:01:00.0: registered panic notifier
>[    5.333604] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
>[    6.081489] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
>[    7.395697] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
>[    7.597808] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
>[  108.700420] bio: create slab <bio-1> at 1
>[  108.943623] bio: create slab <bio-0> at 0
>[  109.757667] PM: Starting manual resume from disk
>[  109.757688] PM: Hibernation image partition 253:1 present
>[  109.757691] PM: Looking for hibernation image.
>[  109.757895] PM: Image not found (code -22)
>[  109.757900] PM: Hibernation image not present or could not be loaded.
>[  109.794528] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
>[  110.030054] systemd-journald[153]: Received SIGTERM
>[  110.533790] audit: type=1404 audit(1400015031.665:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>[  110.644623] SELinux: 2048 avtab hash slots, 99779 rules.
>[  110.671295] SELinux: 2048 avtab hash slots, 99779 rules.
>[  110.703505] SELinux:  8 users, 86 roles, 4800 types, 281 bools, 1 sens, 1024 cats
>[  110.703509] SELinux:  83 classes, 99779 rules
>[  110.708914] SELinux:  Completing initialization.
>[  110.708917] SELinux:  Setting up existing superblocks.
>[  110.708924] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>[  110.708934] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>[  110.708939] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[  110.708979] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[  110.709000] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>[  110.710074] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>[  110.710900] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>[  110.710903] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>[  110.710907] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>[  110.710910] SELinux: initialized (dev aio, type aio), not configured for labeling
>[  110.710913] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>[  110.710931] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[  110.710942] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[  110.710949] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>[  110.710960] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[  110.711403] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>[  110.711406] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[  110.711414] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[  110.711535] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[  110.711575] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[  110.711582] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
>[  110.711585] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[  110.711589] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[  110.711594] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[  110.711601] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[  110.711604] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[  110.711608] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[  110.711611] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[  110.711618] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[  110.711621] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[  110.711626] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
>[  110.711634] SELinux: initialized (dev dm-2, type ext4), uses xattr
>[  110.728487] audit: type=1403 audit(1400015031.860:3): policy loaded auid=4294967295 ses=4294967295
>[  110.737438] systemd[1]: Successfully loaded SELinux policy in 223.673ms.
>[  110.854092] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.
>[  110.911321] systemd[1]: Relabelled /dev and /run in 40.064ms.
>[  112.182263] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[  113.136074] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[  113.136087] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[  113.264079] systemd-udevd[1971]: starting version 208
>[  113.558764] EXT4-fs (dm-2): re-mounted. Opts: (null)
>[  113.926922] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x19
>[  113.957441] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x19
>[  113.958427] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x19
>[  113.959384] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x19
>[  113.960370] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x19
>[  113.961317] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x19
>[  113.962280] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x19
>[  113.962489] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x19
>[  113.963811] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[  114.043945] RPC: Registered named UNIX socket transport module.
>[  114.044124] RPC: Registered udp transport module.
>[  114.044528] RPC: Registered tcp transport module.
>[  114.045044] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[  114.046104] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>[  114.420485] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\_SB_.PCI0.LPC_.PMIO) (20131218/utaddress-258)
>[  114.420997] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[  114.421475] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20131218/utaddress-258)
>[  114.421968] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[  114.422448] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20131218/utaddress-258)
>[  114.422995] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[  114.423615] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[  114.427296] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
>[  114.438308] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
>[  114.497859] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
>[  114.623708] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>[  114.627716] kvm: disabled by bios
>[  114.704314] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[  114.705391] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>[  114.848690] thinkpad_acpi: ThinkPad ACPI Extras v0.25
>[  114.849194] thinkpad_acpi: http://ibm-acpi.sf.net/
>[  114.849670] thinkpad_acpi: ThinkPad BIOS G5ET98WW (2.58 ), EC unknown
>[  114.850163] thinkpad_acpi: Lenovo ThinkPad W530, model 2436CTO
>[  114.851429] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net
>[  114.852096] thinkpad_acpi: radio switch found; radios are enabled
>[  114.852597] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>[  114.853099] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>[  114.855096] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[  114.855685] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
>[  114.857200] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
>[  114.861948] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input11
>[  114.869352] pps_core: LinuxPPS API ver. 1 registered
>[  114.869353] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[  114.879592] PTP clock support registered
>[  114.991851] Bluetooth: Core ver 2.18
>[  114.992161] NET: Registered protocol family 31
>[  114.992737] Bluetooth: HCI device and connection manager initialized
>[  114.993417] Bluetooth: HCI socket layer initialized
>[  114.994111] Bluetooth: L2CAP socket layer initialized
>[  114.994810] Bluetooth: SCO socket layer initialized
>[  115.121381] cfg80211: Calling CRDA to update world regulatory domain
>[  115.180908] media: Linux media interface: v0.10
>[  115.227767] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[  115.228189] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[  115.228851] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[  115.229370] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[  115.230370] Linux video capture interface: v2.00
>[  115.260687] cfg80211: World regulatory domain updated:
>[  115.261216] cfg80211:  DFS Master region: unset
>[  115.261216] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  115.261218] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  115.261219] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  115.261221] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[  115.261222] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[  115.261223] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[  115.261224] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[  115.345394] usbcore: registered new interface driver btusb
>[  115.372015] Intel(R) Wireless WiFi driver for Linux, in-tree:d
>[  115.372649] Copyright(c) 2003- 2014 Intel Corporation
>[  115.373423] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>[  115.374191] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
>[  115.392721] sdhci: Secure Digital Host Controller Interface driver
>[  115.393262] sdhci: Copyright(c) Pierre Ossman
>[  115.396269] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 8)
>[  115.397088] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
>[  115.424773] e1000e 0000:00:19.0 eth0: registered PHC clock
>[  115.425229] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:eb:ad:a2
>[  115.425815] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[  115.426587] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
>[  115.427424] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[  115.427542] hda_intel: Disabling MSI
>[  115.427956] ALSA sound/pci/hda/hda_intel.c:3186 0000:01:00.1: Handle VGA-switcheroo audio client
>[  115.428682] ALSA sound/pci/hda/hda_intel.c:3666 0000:01:00.1: Disabling 64bit DMA
>[  115.435563] ALSA sound/pci/hda/hda_intel.c:1760 0000:01:00.1: Enable delay in RIRB handling
>[  115.448178] ALSA sound/pci/hda/patch_realtek.c:434 SKU: Nid=0x1d sku_cfg=0x40138205
>[  115.448182] ALSA sound/pci/hda/patch_realtek.c:436 SKU: port_connectivity=0x1
>[  115.448184] ALSA sound/pci/hda/patch_realtek.c:437 SKU: enable_pcbeep=0x1
>[  115.448187] ALSA sound/pci/hda/patch_realtek.c:438 SKU: check_sum=0x00000003
>[  115.448189] ALSA sound/pci/hda/patch_realtek.c:439 SKU: customization=0x00000082
>[  115.448192] ALSA sound/pci/hda/patch_realtek.c:440 SKU: external_amp=0x0
>[  115.448194] ALSA sound/pci/hda/patch_realtek.c:441 SKU: platform_type=0x1
>[  115.448196] ALSA sound/pci/hda/patch_realtek.c:442 SKU: swap=0x0
>[  115.448198] ALSA sound/pci/hda/patch_realtek.c:443 SKU: override=0x1
>[  115.448513] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[  115.448517] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[  115.448520] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
>[  115.448522] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[  115.448524] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[  115.448528] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x18
>[  115.448533] ALSA sound/pci/hda/hda_auto_parser.c:410      Dock Mic=0x19
>[  115.448536] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x12
>[  115.448539] ALSA sound/pci/hda/patch_realtek.c:504 realtek: No valid SSID, checking pincfg 0x40138205 for NID 0x1d
>[  115.448542] ALSA sound/pci/hda/patch_realtek.c:520 realtek: Enabling init ASM_ID=0x8205 CODEC_ID=10ec0269
>[  115.458072] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
>[  115.458828] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
>[  115.459569] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
>[  115.460555] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>[  115.571739] iTCO_vendor_support: vendor-support=0
>[  115.604602] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
>[  115.605346] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
>[  115.606170] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
>[  115.825446] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
>[  115.828613] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input19
>[  115.829281] usbcore: registered new interface driver uvcvideo
>[  115.829817] USB Video Class driver (1.1.1)
>[  115.865390] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[  115.865988] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
>[  115.866675] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[  115.896874] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
>[  115.927643] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
>[  115.928098] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
>[  115.928542] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
>[  115.929127] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
>[  115.929857] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[  115.952071] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>[  115.966073] cfg80211: Calling CRDA for country: US
>[  115.969585] cfg80211: Regulatory domain changed to country: US
>[  115.970086] cfg80211:  DFS Master region: unset
>[  115.970093] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  115.971106] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[  115.971707] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[  115.972241] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[  115.972793] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[  115.973376] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[  116.173646] systemd-udevd[1989]: renamed network interface wlan0 to wlp3s0
>[  116.183465] systemd-udevd[1988]: renamed network interface eth0 to em1
>[  116.316438] Adding 16326652k swap on /dev/mapper/fedora_<hostname>-swap.  Priority:-1 extents:1 across:16326652k FS
>[  118.391320] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[  118.498701] SELinux: initialized (dev sda1, type ext4), uses xattr
>[  119.057667] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
>[  119.058161] SELinux: initialized (dev dm-3, type ext4), uses xattr
>[  119.070305] systemd-journald[1953]: Received request to flush runtime journal from PID 1
>[  119.516048] audit: type=1305 audit(1400029440.650:4): audit_pid=2387 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
>[  120.304725] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[  120.473052] systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 2409 (jexec)
>[  120.510629] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>[  124.245980] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[  124.291257] Ebtables v2.0 registered
>[  124.311180] Bridge firewalling registered
>[  134.130499] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[  134.130939] Bluetooth: BNEP filters: protocol multicast
>[  134.131372] Bluetooth: BNEP socket layer initialized
>[  136.776292] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[  136.876895] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[  136.877201] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[  136.881677] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[  136.888458] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
>[  137.154319] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[  137.161099] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
>[  137.249394] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[ 2053.540876] fuse init (API version 7.22)
>[ 2053.552557] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>[ 2053.572038] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[ 2079.091647] wlp3s0: authenticate with b4:75:0e:56:62:b8
>[ 2079.097370] wlp3s0: send auth to b4:75:0e:56:62:b8 (try 1/3)
>[ 2079.105504] wlp3s0: authenticated
>[ 2079.106053] wlp3s0: associate with b4:75:0e:56:62:b8 (try 1/3)
>[ 2079.119390] wlp3s0: RX AssocResp from b4:75:0e:56:62:b8 (capab=0x1411 status=0 aid=3)
>[ 2079.146086] wlp3s0: associated
>[ 2079.146148] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[ 2083.210113] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 2090.198727] tun: Universal TUN/TAP device driver, 1.6
>[ 2090.198735] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[ 2125.354681] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 2146.757429] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 2162.893280] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 2381.159061] wlp3s0: AP b4:75:0e:56:62:b8 changed bandwidth, new config is 2452 MHz, width 1 (2452/0 MHz)
>[20873.454803] traps: polkitd[2527] general protection ip:7f932b7cc022 sp:7fff4d0629a0 error:0 in libmozjs-17.0.so[7f932b68d000+3b3000]
>[36684.146507] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
>[36684.146517] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
>[36684.146867] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
>[36684.146876] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
>[36688.637681] wlp3s0: deauthenticating from b4:75:0e:56:62:b8 by local choice (reason=3)
>[36688.663725] cfg80211: Calling CRDA to update world regulatory domain
>[36688.678410] cfg80211: World regulatory domain updated:
>[36688.678417] cfg80211:  DFS Master region: unset
>[36688.678420] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[36688.678423] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[36688.678426] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[36688.678428] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[36688.678431] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[36688.678433] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[36688.678435] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[36688.678459] cfg80211: Calling CRDA for country: US
>[36688.684431] cfg80211: Regulatory domain changed to country: US
>[36688.684438] cfg80211:  DFS Master region: unset
>[36688.684440] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[36688.684444] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[36688.684446] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[36688.684448] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[36688.684451] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[36688.684453] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[36688.978748] PM: Syncing filesystems ... done.
>[36689.989828] PM: Preparing system for mem sleep
>[36690.136533] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[36690.138534] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[36690.139804] PM: Entering mem sleep
>[36690.139948] Suspending console(s) (use no_console_suspend to debug)
>[36690.140472] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
>[36690.140578] sd 2:0:0:0: [sdb] Stopping disk
>[36690.269727] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[36690.269909] sd 0:0:0:0: [sda] Stopping disk
>[36690.480758] nouveau  [     DRM] suspending display...
>[36690.480782] nouveau  [     DRM] unpinning framebuffer(s)...
>[36690.481745] nouveau  [     DRM] evicting buffers...
>[36691.181515] nouveau  [     DRM] waiting for kernel channels to go idle...
>[36691.181533] nouveau  [     DRM] suspending client object trees...
>[36691.195359] nouveau  [     DRM] suspending kernel object tree...
>[36691.404080] thinkpad_acpi: EC reports that Thermal Table has changed
>[36693.434796] PM: suspend of devices complete after 3295.636 msecs
>[36693.435177] PM: late suspend of devices complete after 0.375 msecs
>[36693.446624] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[36693.457735] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[36693.468542] e1000e 0000:00:19.0: System wakeup enabled by ACPI
>[36693.490535] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[36693.501570] PM: noirq suspend of devices complete after 66.412 msecs
>[36693.501793] ACPI: Preparing to enter system sleep state S3
>[36693.504030] PM: Saving platform NVS memory
>[36693.504589] Disabling non-boot CPUs ...
>[36693.506009] smpboot: CPU 1 is now offline
>[36693.508543] smpboot: CPU 2 is now offline
>[36693.510580] smpboot: CPU 3 is now offline
>[36693.512666] smpboot: CPU 4 is now offline
>[36693.514449] smpboot: CPU 5 is now offline
>[36693.515235] Broke affinity for irq 41
>[36693.516278] smpboot: CPU 6 is now offline
>[36693.516999] Broke affinity for irq 43
>[36693.518022] smpboot: CPU 7 is now offline
>[36693.520382] ACPI: Low-level resume complete
>[36693.520445] PM: Restoring platform NVS memory
>[36693.521138] Enabling non-boot CPUs ...
>[36693.521210] x86: Booting SMP configuration:
>[36693.521212] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[36693.535641] Intel pstate controlling: cpu 1
>[36693.535739] CPU1 is up
>[36693.535775] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[36693.550146] Intel pstate controlling: cpu 2
>[36693.550241] CPU2 is up
>[36693.550280] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[36693.564630] Intel pstate controlling: cpu 3
>[36693.564721] CPU3 is up
>[36693.564758] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[36693.579138] Intel pstate controlling: cpu 4
>[36693.579227] CPU4 is up
>[36693.579263] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[36693.593652] Intel pstate controlling: cpu 5
>[36693.593740] CPU5 is up
>[36693.593777] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[36693.608220] Intel pstate controlling: cpu 6
>[36693.608310] CPU6 is up
>[36693.608348] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[36693.622821] Intel pstate controlling: cpu 7
>[36693.622911] CPU7 is up
>[36693.636884] ACPI: Waking up from system sleep state S3
>[36693.675087] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[36693.719044] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[36693.741035] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[36693.785131] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[36693.808096] PM: noirq resume of devices complete after 143.863 msecs
>[36693.808349] PM: early resume of devices complete after 0.212 msecs
>[36693.808470] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
>[36693.808475] e1000e 0000:00:19.0: System wakeup disabled by ACPI
>[36693.808539] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[36693.808582] nouveau  [     DRM] re-enabling device...
>[36693.808617] nouveau  [     DRM] resuming kernel object tree...
>[36693.808637] nouveau  [   VBIOS][0000:01:00.0] running init tables
>[36693.808745] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[36693.855970] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
>[36694.016114] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci
>[36694.115888] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[36694.117455] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[36694.117459] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[36694.117887] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[36694.118237] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[36694.118241] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[36694.118774] ata3.00: configured for UDMA/133
>[36694.118919] sd 2:0:0:0: [sdb] Starting disk
>[36694.119299] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[36694.119882] ata5: SATA link down (SStatus 0 SControl 300)
>[36694.120171] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[36694.122560] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[36694.123223] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[36694.123523] ata2.00: configured for UDMA/100
>[36694.173945] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci
>[36694.263205] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 875000uv
>[36694.263210] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
>[36694.263374] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz memory 648 MHz 
>[36694.270018] nouveau  [     DRM] resuming client object trees...
>[36694.278376] nouveau  [     DRM] resuming display...
>[36694.331934] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci
>[36694.361823] firewire_core 0000:02:00.3: rediscovered device fw0
>[36696.106336] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[36696.107550] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[36696.107555] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[36696.109779] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[36696.109783] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[36696.110699] ata1.00: configured for UDMA/133
>[36696.111171] sd 0:0:0:0: [sda] Starting disk
>[36696.133282] PM: resume of devices complete after 2325.655 msecs
>[36696.184863] PM: Finishing wakeup.
>[36696.184867] Restarting tasks ... done.
>[36696.206503] video LNXVIDEO:01: Restoring backlight state
>[36696.515408] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[36696.616171] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[36696.617119] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[36696.618512] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[36696.625241] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
>[36696.704641] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[36699.460458] wlp3s0: authenticate with 24:b6:57:7b:a9:20
>[36699.479822] wlp3s0: send auth to 24:b6:57:7b:a9:20 (try 1/3)
>[36699.483935] wlp3s0: authenticated
>[36699.484230] wlp3s0: associate with 24:b6:57:7b:a9:20 (try 1/3)
>[36699.506671] wlp3s0: RX AssocResp from 24:b6:57:7b:a9:20 (capab=0x431 status=0 aid=2)
>[36699.530557] wlp3s0: associated
>[36699.530616] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[36699.530748] cfg80211: Calling CRDA for country: US
>[36699.537482] cfg80211: Regulatory domain changed to country: US
>[36699.537489] cfg80211:  DFS Master region: unset
>[36699.537492] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[36699.537495] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[36699.537498] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[36699.537500] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[36699.537503] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[36699.537505] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[36728.072967] thinkpad_acpi: EC reports that Thermal Table has changed
>[39146.642762] usb 3-1: new high-speed USB device number 3 using xhci_hcd
>[39146.808409] usb 3-1: New USB device found, idVendor=154b, idProduct=007a
>[39146.808417] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[39146.808421] usb 3-1: Product: USB 2.0 FD
>[39146.808424] usb 3-1: Manufacturer: PNY Technologies
>[39146.808427] usb 3-1: SerialNumber: AD98HE03000000110
>[39146.809822] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
>[39146.809829] usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
>[39147.008201] usb-storage 3-1:1.0: USB Mass Storage device detected
>[39147.008575] scsi6 : usb-storage 3-1:1.0
>[39147.008822] usbcore: registered new interface driver usb-storage
>[39148.495478] scsi 6:0:0:0: Direct-Access     PNY      USB 2.0 FD       1100 PQ: 0 ANSI: 4
>[39148.496381] sd 6:0:0:0: [sdc] 15950592 512-byte logical blocks: (8.16 GB/7.60 GiB)
>[39148.496594] sd 6:0:0:0: Attached scsi generic sg3 type 0
>[39148.496854] sd 6:0:0:0: [sdc] Write Protect is off
>[39148.496862] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
>[39148.497404] sd 6:0:0:0: [sdc] No Caching mode page found
>[39148.497410] sd 6:0:0:0: [sdc] Assuming drive cache: write through
>[39148.500972] sd 6:0:0:0: [sdc] No Caching mode page found
>[39148.500980] sd 6:0:0:0: [sdc] Assuming drive cache: write through
>[39148.501746]  sdc: sdc1
>[39148.503878] sd 6:0:0:0: [sdc] No Caching mode page found
>[39148.503887] sd 6:0:0:0: [sdc] Assuming drive cache: write through
>[39148.503894] sd 6:0:0:0: [sdc] Attached SCSI removable disk
>[39156.890785] SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts
>[39506.318479] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[39777.187164] usb 3-2: USB disconnect, device number 2
>[39782.223237] usb 3-2: new full-speed USB device number 4 using xhci_hcd
>[39782.392585] usb 3-2: New USB device found, idVendor=045e, idProduct=0745
>[39782.392594] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[39782.392598] usb 3-2: Product: MicrosoftÂ® Nano Transceiver v2.0
>[39782.392601] usb 3-2: Manufacturer: Microsoft
>[39782.396573] input: Microsoft MicrosoftÂ® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:045E:0745.0004/input/input20
>[39782.396976] hid-generic 0003:045E:0745.0004: input,hidraw0: USB HID v1.11 Keyboard [Microsoft MicrosoftÂ® Nano Transceiver v2.0] on usb-0000:00:14.0-2/input0
>[39782.402821] input: Microsoft MicrosoftÂ® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:045E:0745.0005/input/input21
>[39782.403389] hid-generic 0003:045E:0745.0005: input,hidraw1: USB HID v1.11 Mouse [Microsoft MicrosoftÂ® Nano Transceiver v2.0] on usb-0000:00:14.0-2/input1
>[39782.418949] input: Microsoft MicrosoftÂ® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:045E:0745.0006/input/input22
>[39782.419707] hid-generic 0003:045E:0745.0006: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft MicrosoftÂ® Nano Transceiver v2.0] on usb-0000:00:14.0-2/input2
>[39783.093262] usb 3-1: USB disconnect, device number 3
>[40311.267598] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[40470.575457] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[41432.344906] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[43133.488119] wlp3s0: authenticate with 6c:9c:ed:b4:12:70
>[43133.493108] wlp3s0: send auth to 6c:9c:ed:b4:12:70 (try 1/3)
>[43133.496038] cfg80211: Calling CRDA to update world regulatory domain
>[43133.497068] wlp3s0: authenticated
>[43133.497899] wlp3s0: associate with 6c:9c:ed:b4:12:70 (try 1/3)
>[43133.503295] wlp3s0: RX AssocResp from 6c:9c:ed:b4:12:70 (capab=0x431 status=0 aid=3)
>[43133.509232] cfg80211: World regulatory domain updated:
>[43133.509238] cfg80211:  DFS Master region: unset
>[43133.509240] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[43133.509243] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[43133.509246] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[43133.509247] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[43133.509249] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[43133.509251] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[43133.509253] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[43133.509275] cfg80211: Calling CRDA for country: US
>[43133.514008] cfg80211: Regulatory domain changed to country: US
>[43133.514013] cfg80211:  DFS Master region: unset
>[43133.514014] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[43133.514017] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[43133.514019] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[43133.514021] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[43133.514023] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[43133.514024] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[43133.526414] wlp3s0: associated
>[43133.526514] cfg80211: Calling CRDA for country: US
>[43133.529088] cfg80211: Regulatory domain changed to country: US
>[43133.529092] cfg80211:  DFS Master region: unset
>[43133.529093] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[43133.529096] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[43133.529098] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[43133.529099] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[43133.529101] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[43133.529102] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[45525.600776] usb 3-1: new high-speed USB device number 5 using xhci_hcd
>[45525.766726] usb 3-1: New USB device found, idVendor=154b, idProduct=007a
>[45525.766735] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[45525.766739] usb 3-1: Product: USB 2.0 FD
>[45525.766742] usb 3-1: Manufacturer: PNY Technologies
>[45525.766745] usb 3-1: SerialNumber: AD98HE03000000110
>[45525.767416] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
>[45525.767426] usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
>[45525.767700] usb-storage 3-1:1.0: USB Mass Storage device detected
>[45525.767875] scsi7 : usb-storage 3-1:1.0
>[45527.259470] scsi 7:0:0:0: Direct-Access     PNY      USB 2.0 FD       1100 PQ: 0 ANSI: 4
>[45527.260339] sd 7:0:0:0: [sdc] 15950592 512-byte logical blocks: (8.16 GB/7.60 GiB)
>[45527.260504] sd 7:0:0:0: Attached scsi generic sg3 type 0
>[45527.260819] sd 7:0:0:0: [sdc] Write Protect is off
>[45527.260828] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
>[45527.261275] sd 7:0:0:0: [sdc] No Caching mode page found
>[45527.261280] sd 7:0:0:0: [sdc] Assuming drive cache: write through
>[45527.263959] sd 7:0:0:0: [sdc] No Caching mode page found
>[45527.263968] sd 7:0:0:0: [sdc] Assuming drive cache: write through
>[45527.264705]  sdc: sdc1
>[45527.267394] sd 7:0:0:0: [sdc] No Caching mode page found
>[45527.267403] sd 7:0:0:0: [sdc] Assuming drive cache: write through
>[45527.267410] sd 7:0:0:0: [sdc] Attached SCSI removable disk
>[45599.919122] usb 3-1: USB disconnect, device number 5
>[45605.124889] usb 3-1: new high-speed USB device number 6 using xhci_hcd
>[45605.290648] usb 3-1: New USB device found, idVendor=154b, idProduct=007a
>[45605.290657] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[45605.290661] usb 3-1: Product: USB 2.0 FD
>[45605.290664] usb 3-1: Manufacturer: PNY Technologies
>[45605.290667] usb 3-1: SerialNumber: AD98HE03000000110
>[45605.291204] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
>[45605.291215] usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
>[45605.291745] usb-storage 3-1:1.0: USB Mass Storage device detected
>[45605.292435] scsi8 : usb-storage 3-1:1.0
>[45606.783256] scsi 8:0:0:0: Direct-Access     PNY      USB 2.0 FD       1100 PQ: 0 ANSI: 4
>[45606.784128] sd 8:0:0:0: Attached scsi generic sg3 type 0
>[45606.784243] sd 8:0:0:0: [sdc] 15950592 512-byte logical blocks: (8.16 GB/7.60 GiB)
>[45606.784729] sd 8:0:0:0: [sdc] Write Protect is off
>[45606.784737] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00
>[45606.785236] sd 8:0:0:0: [sdc] No Caching mode page found
>[45606.785247] sd 8:0:0:0: [sdc] Assuming drive cache: write through
>[45606.787407] sd 8:0:0:0: [sdc] No Caching mode page found
>[45606.787413] sd 8:0:0:0: [sdc] Assuming drive cache: write through
>[45606.788140]  sdc: sdc1
>[45606.790497] sd 8:0:0:0: [sdc] No Caching mode page found
>[45606.790504] sd 8:0:0:0: [sdc] Assuming drive cache: write through
>[45606.790509] sd 8:0:0:0: [sdc] Attached SCSI removable disk
>[45610.015941] SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts
>[46636.045544] usb 3-1: USB disconnect, device number 6
>[47417.158128] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[51304.942626] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[53630.067556] perf samples too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
>[60179.419489] usb 3-1: new high-speed USB device number 7 using xhci_hcd
>[60179.585450] usb 3-1: New USB device found, idVendor=154b, idProduct=007a
>[60179.585459] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[60179.585463] usb 3-1: Product: USB 2.0 FD
>[60179.585466] usb 3-1: Manufacturer: PNY Technologies
>[60179.585469] usb 3-1: SerialNumber: AD98HE03000000110
>[60179.586244] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
>[60179.586252] usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
>[60179.586634] usb-storage 3-1:1.0: USB Mass Storage device detected
>[60179.588391] scsi9 : usb-storage 3-1:1.0
>[60181.081126] scsi 9:0:0:0: Direct-Access     PNY      USB 2.0 FD       1100 PQ: 0 ANSI: 4
>[60181.082045] sd 9:0:0:0: [sdc] 15950592 512-byte logical blocks: (8.16 GB/7.60 GiB)
>[60181.082324] sd 9:0:0:0: Attached scsi generic sg3 type 0
>[60181.082516] sd 9:0:0:0: [sdc] Write Protect is off
>[60181.082525] sd 9:0:0:0: [sdc] Mode Sense: 43 00 00 00
>[60181.082970] sd 9:0:0:0: [sdc] No Caching mode page found
>[60181.082977] sd 9:0:0:0: [sdc] Assuming drive cache: write through
>[60181.085266] sd 9:0:0:0: [sdc] No Caching mode page found
>[60181.085275] sd 9:0:0:0: [sdc] Assuming drive cache: write through
>[60181.086054]  sdc: sdc1
>[60181.088686] sd 9:0:0:0: [sdc] No Caching mode page found
>[60181.088692] sd 9:0:0:0: [sdc] Assuming drive cache: write through
>[60181.088696] sd 9:0:0:0: [sdc] Attached SCSI removable disk
>[60211.432506] SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts
>[61058.750303] usb 3-1: USB disconnect, device number 7
>[61608.995878] wlp3s0: authenticate with 24:b6:57:7b:a9:20
>[61609.001469] wlp3s0: send auth to 24:b6:57:7b:a9:20 (try 1/3)
>[61609.003861] cfg80211: Calling CRDA to update world regulatory domain
>[61609.012277] cfg80211: World regulatory domain updated:
>[61609.012284] cfg80211:  DFS Master region: unset
>[61609.012287] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61609.012290] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61609.012293] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61609.012295] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[61609.012298] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[61609.012300] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[61609.012302] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[61609.012329] cfg80211: Calling CRDA for country: US
>[61609.015423] wlp3s0: authenticated
>[61609.016526] wlp3s0: associate with 24:b6:57:7b:a9:20 (try 1/3)
>[61609.017586] cfg80211: Regulatory domain changed to country: US
>[61609.017593] cfg80211:  DFS Master region: unset
>[61609.017596] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61609.017601] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[61609.017605] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[61609.017608] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[61609.017612] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[61609.017615] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[61609.034763] wlp3s0: RX AssocResp from 24:b6:57:7b:a9:20 (capab=0x431 status=0 aid=4)
>[61609.060937] wlp3s0: associated
>[61609.061011] cfg80211: Calling CRDA for country: US
>[61609.063628] cfg80211: Regulatory domain changed to country: US
>[61609.063632] cfg80211:  DFS Master region: unset
>[61609.063634] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61609.063636] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[61609.063638] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[61609.063640] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[61609.063641] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[61609.063643] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[66933.592438] wlp3s0: deauthenticated from 24:b6:57:7b:a9:20 (Reason: 15)
>[66933.628770] cfg80211: Calling CRDA to update world regulatory domain
>[66933.642266] cfg80211: World regulatory domain updated:
>[66933.642274] cfg80211:  DFS Master region: unset
>[66933.642276] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[66933.642280] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[66933.642283] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[66933.642285] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[66933.642287] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[66933.642289] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[66933.642292] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[66933.642324] cfg80211: Calling CRDA for country: US
>[66933.646966] cfg80211: Regulatory domain changed to country: US
>[66933.646973] cfg80211:  DFS Master region: unset
>[66933.646975] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[66933.646978] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[66933.646981] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[66933.646984] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[66933.646986] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[66933.646988] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[66933.838399] wlp3s0: authenticate with 6c:9c:ed:b4:12:70
>[66933.842963] wlp3s0: send auth to 6c:9c:ed:b4:12:70 (try 1/3)
>[66933.846116] wlp3s0: authenticated
>[66933.846238] wlp3s0: waiting for beacon from 6c:9c:ed:b4:12:70
>[66933.946469] wlp3s0: associate with 6c:9c:ed:b4:12:70 (try 1/3)
>[66933.951127] wlp3s0: RX AssocResp from 6c:9c:ed:b4:12:70 (capab=0x431 status=0 aid=1)
>[66933.975146] wlp3s0: associated
>[66933.975207] cfg80211: Calling CRDA for country: US
>[66933.977240] cfg80211: Regulatory domain changed to country: US
>[66933.977244] cfg80211:  DFS Master region: unset
>[66933.977245] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[66933.977247] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[66933.977249] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[66933.977250] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[66933.977251] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[66933.977253] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[67074.055546] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
>[67074.055554] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
>[67074.056157] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
>[67074.056159] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
>[67079.059074] wlp3s0: deauthenticating from 6c:9c:ed:b4:12:70 by local choice (reason=3)
>[67079.089792] cfg80211: Calling CRDA to update world regulatory domain
>[67079.108397] cfg80211: World regulatory domain updated:
>[67079.108404] cfg80211:  DFS Master region: unset
>[67079.108406] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[67079.108410] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[67079.108413] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[67079.108415] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[67079.108417] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[67079.108419] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[67079.108422] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[67079.108450] cfg80211: Calling CRDA for country: US
>[67079.113837] cfg80211: Regulatory domain changed to country: US
>[67079.113843] cfg80211:  DFS Master region: unset
>[67079.113845] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[67079.113849] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[67079.113851] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[67079.113854] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[67079.113856] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[67079.113858] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[67079.229978] PM: Syncing filesystems ... done.
>[67080.135601] PM: Preparing system for mem sleep
>[67080.289370] Freezing user space processes ... (elapsed 0.002 seconds) done.
>[67080.293701] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[67080.296817] PM: Entering mem sleep
>[67080.296957] Suspending console(s) (use no_console_suspend to debug)
>[67080.299752] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
>[67080.299916] sd 2:0:0:0: [sdb] Stopping disk
>[67080.439065] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[67080.439285] sd 0:0:0:0: [sda] Stopping disk
>[67080.651773] nouveau  [     DRM] suspending display...
>[67080.651792] nouveau  [     DRM] unpinning framebuffer(s)...
>[67080.651935] nouveau  [     DRM] evicting buffers...
>[67080.849083] thinkpad_acpi: EC reports that Thermal Table has changed
>[67081.514091] nouveau  [     DRM] waiting for kernel channels to go idle...
>[67081.514113] nouveau  [     DRM] suspending client object trees...
>[67081.526926] nouveau  [     DRM] suspending kernel object tree...
>[67083.731661] PM: suspend of devices complete after 3433.330 msecs
>[67083.732027] PM: late suspend of devices complete after 0.363 msecs
>[67083.743600] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[67083.754729] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[67083.765492] e1000e 0000:00:19.0: System wakeup enabled by ACPI
>[67083.787485] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[67083.798543] PM: noirq suspend of devices complete after 66.534 msecs
>[67083.799218] ACPI: Preparing to enter system sleep state S3
>[67083.802313] PM: Saving platform NVS memory
>[67083.803621] Disabling non-boot CPUs ...
>[67083.805435] smpboot: CPU 1 is now offline
>[67083.807821] smpboot: CPU 2 is now offline
>[67083.809719] smpboot: CPU 3 is now offline
>[67083.811611] smpboot: CPU 4 is now offline
>[67083.814146] smpboot: CPU 5 is now offline
>[67083.817053] smpboot: CPU 6 is now offline
>[67083.819018] smpboot: CPU 7 is now offline
>[67083.821655] ACPI: Low-level resume complete
>[67083.821720] PM: Restoring platform NVS memory
>[67083.822394] Enabling non-boot CPUs ...
>[67083.822462] x86: Booting SMP configuration:
>[67083.822463] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[67083.836883] Intel pstate controlling: cpu 1
>[67083.836983] CPU1 is up
>[67083.837017] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[67083.851378] Intel pstate controlling: cpu 2
>[67083.851469] CPU2 is up
>[67083.851502] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[67083.865881] Intel pstate controlling: cpu 3
>[67083.865969] CPU3 is up
>[67083.866002] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[67083.880378] Intel pstate controlling: cpu 4
>[67083.880465] CPU4 is up
>[67083.880497] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[67083.894946] Intel pstate controlling: cpu 5
>[67083.895035] CPU5 is up
>[67083.895069] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[67083.909488] Intel pstate controlling: cpu 6
>[67083.909579] CPU6 is up
>[67083.909613] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[67083.924137] Intel pstate controlling: cpu 7
>[67083.924230] CPU7 is up
>[67083.938191] ACPI: Waking up from system sleep state S3
>[67083.986176] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[67084.030134] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[67084.052129] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[67084.096198] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[67084.118965] PM: noirq resume of devices complete after 143.541 msecs
>[67084.119228] PM: early resume of devices complete after 0.220 msecs
>[67084.119346] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
>[67084.119355] e1000e 0000:00:19.0: System wakeup disabled by ACPI
>[67084.119440] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[67084.119452] nouveau  [     DRM] re-enabling device...
>[67084.119541] nouveau  [     DRM] resuming kernel object tree...
>[67084.119575] nouveau  [   VBIOS][0000:01:00.0] running init tables
>[67084.120218] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[67084.167070] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
>[67084.327132] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci
>[67084.425979] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[67084.427544] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[67084.427548] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[67084.427980] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[67084.428197] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[67084.428200] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[67084.428719] ata3.00: configured for UDMA/133
>[67084.428786] sd 2:0:0:0: [sdb] Starting disk
>[67084.429261] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[67084.429966] ata5: SATA link down (SStatus 0 SControl 300)
>[67084.430173] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[67084.432417] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[67084.433085] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[67084.433365] ata2.00: configured for UDMA/100
>[67084.485079] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci
>[67084.531214] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 875000uv
>[67084.531219] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
>[67084.531384] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz memory 648 MHz 
>[67084.537989] nouveau  [     DRM] resuming client object trees...
>[67084.546306] nouveau  [     DRM] resuming display...
>[67084.643067] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci
>[67084.670921] firewire_core 0000:02:00.3: rediscovered device fw0
>[67086.416357] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[67086.417402] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[67086.417406] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[67086.419449] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[67086.419453] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[67086.420374] ata1.00: configured for UDMA/133
>[67086.420777] sd 0:0:0:0: [sda] Starting disk
>[67086.442627] PM: resume of devices complete after 2324.124 msecs
>[67086.571915] PM: Finishing wakeup.
>[67086.571917] Restarting tasks ... done.
>[67086.579450] video LNXVIDEO:01: Restoring backlight state
>[67086.947215] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[67087.048205] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[67087.048482] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[67087.049594] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[67087.056272] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
>[67087.134114] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[67090.035799] wlp3s0: authenticate with 6c:9c:ed:b4:12:70
>[67090.040234] wlp3s0: send auth to 6c:9c:ed:b4:12:70 (try 1/3)
>[67090.043520] wlp3s0: authenticated
>[67090.044187] wlp3s0: associate with 6c:9c:ed:b4:12:70 (try 1/3)
>[67090.057679] wlp3s0: RX AssocResp from 6c:9c:ed:b4:12:70 (capab=0x431 status=0 aid=2)
>[67090.079863] wlp3s0: associated
>[67090.079923] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[67090.080054] cfg80211: Calling CRDA for country: US
>[67090.088266] cfg80211: Regulatory domain changed to country: US
>[67090.088273] cfg80211:  DFS Master region: unset
>[67090.088276] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[67090.088279] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[67090.088282] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[67090.088284] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[67090.088287] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[67090.088289] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[67107.564567] thinkpad_acpi: EC reports that Thermal Table has changed
>[67600.934090] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[70034.709565] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[70043.987880] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[70169.982738] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[73404.511767] wlp3s0: authenticate with 24:b6:57:7b:a9:20
>[73404.522081] wlp3s0: send auth to 24:b6:57:7b:a9:20 (try 1/3)
>[73404.522260] cfg80211: Calling CRDA to update world regulatory domain
>[73404.525762] wlp3s0: authenticated
>[73404.525928] wlp3s0: waiting for beacon from 24:b6:57:7b:a9:20
>[73404.536215] cfg80211: World regulatory domain updated:
>[73404.536222] cfg80211:  DFS Master region: unset
>[73404.536225] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[73404.536228] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[73404.536231] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[73404.536233] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[73404.536236] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[73404.536238] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[73404.536240] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[73404.536269] cfg80211: Calling CRDA for country: US
>[73404.541573] cfg80211: Regulatory domain changed to country: US
>[73404.541579] cfg80211:  DFS Master region: unset
>[73404.541581] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[73404.541585] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[73404.541588] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[73404.541590] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[73404.541592] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[73404.541595] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[73404.574437] wlp3s0: associate with 24:b6:57:7b:a9:20 (try 1/3)
>[73404.588775] wlp3s0: RX AssocResp from 24:b6:57:7b:a9:20 (capab=0x431 status=0 aid=1)
>[73404.627502] wlp3s0: associated
>[73404.631298] cfg80211: Calling CRDA for country: US
>[73404.634102] cfg80211: Regulatory domain changed to country: US
>[73404.634107] cfg80211:  DFS Master region: unset
>[73404.634109] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[73404.634111] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[73404.634113] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[73404.634115] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[73404.634117] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[73404.634118] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[75083.411645] wlp3s0: authenticate with 6c:9c:ed:b5:58:b0
>[75083.418626] wlp3s0: send auth to 6c:9c:ed:b5:58:b0 (try 1/3)
>[75083.418782] cfg80211: Calling CRDA to update world regulatory domain
>[75083.421771] wlp3s0: authenticated
>[75083.421934] wlp3s0: waiting for beacon from 6c:9c:ed:b5:58:b0
>[75083.432338] cfg80211: World regulatory domain updated:
>[75083.432343] cfg80211:  DFS Master region: unset
>[75083.432345] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[75083.432349] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75083.432351] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75083.432353] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[75083.432355] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[75083.432357] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[75083.432359] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[75083.432380] cfg80211: Calling CRDA for country: US
>[75083.436720] cfg80211: Regulatory domain changed to country: US
>[75083.436725] cfg80211:  DFS Master region: unset
>[75083.436727] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[75083.436730] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[75083.436732] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[75083.436734] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[75083.436736] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[75083.436738] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[75083.456262] wlp3s0: associate with 6c:9c:ed:b5:58:b0 (try 1/3)
>[75083.462124] wlp3s0: RX AssocResp from 6c:9c:ed:b5:58:b0 (capab=0x431 status=0 aid=1)
>[75083.484178] wlp3s0: associated
>[75083.484317] cfg80211: Calling CRDA for country: US
>[75083.487772] cfg80211: Regulatory domain changed to country: US
>[75083.487778] cfg80211:  DFS Master region: unset
>[75083.487780] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[75083.487784] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[75083.487787] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[75083.487789] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[75083.487791] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[75083.487794] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[77602.749650] wlp3s0: authenticate with 24:b6:57:7b:a9:20
>[77602.754763] wlp3s0: send auth to 24:b6:57:7b:a9:20 (try 1/3)
>[77602.756193] cfg80211: Calling CRDA to update world regulatory domain
>[77602.757614] wlp3s0: authenticated
>[77602.757741] wlp3s0: waiting for beacon from 24:b6:57:7b:a9:20
>[77602.759585] cfg80211: World regulatory domain updated:
>[77602.759589] cfg80211:  DFS Master region: unset
>[77602.759590] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[77602.759592] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[77602.759594] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[77602.759595] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[77602.759596] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[77602.759597] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[77602.759598] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[77602.759615] cfg80211: Calling CRDA for country: US
>[77602.763216] cfg80211: Regulatory domain changed to country: US
>[77602.763219] cfg80211:  DFS Master region: unset
>[77602.763221] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[77602.763223] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[77602.763224] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[77602.763225] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[77602.763226] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[77602.763228] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[77602.789188] wlp3s0: associate with 24:b6:57:7b:a9:20 (try 1/3)
>[77602.796696] wlp3s0: RX AssocResp from 24:b6:57:7b:a9:20 (capab=0x431 status=0 aid=1)
>[77602.821980] wlp3s0: associated
>[77602.822051] cfg80211: Calling CRDA for country: US
>[77602.824038] cfg80211: Regulatory domain changed to country: US
>[77602.824042] cfg80211:  DFS Master region: unset
>[77602.824043] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[77602.824045] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[77602.824046] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[77602.824047] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[77602.824048] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[77602.824049] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[82402.023888] polkitd[13899]: segfault at 15 ip 00007fc37afaac8d sp 00007fff602303d0 error 4 in libmozjs-17.0.so[7fc37aeae000+3b3000]
>[84560.466908] wlp3s0: authenticate with 6c:9c:ed:b4:12:70
>[84560.472686] wlp3s0: send auth to 6c:9c:ed:b4:12:70 (try 1/3)
>[84560.475558] cfg80211: Calling CRDA to update world regulatory domain
>[84560.475833] wlp3s0: authenticated
>[84560.476037] wlp3s0: waiting for beacon from 6c:9c:ed:b4:12:70
>[84560.489742] cfg80211: World regulatory domain updated:
>[84560.489748] cfg80211:  DFS Master region: unset
>[84560.489750] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[84560.489754] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[84560.489756] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[84560.489758] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[84560.489760] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[84560.489762] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[84560.489765] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[84560.489789] cfg80211: Calling CRDA for country: US
>[84560.494526] cfg80211: Regulatory domain changed to country: US
>[84560.494532] cfg80211:  DFS Master region: unset
>[84560.494534] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[84560.494537] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[84560.494539] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[84560.494541] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[84560.494543] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[84560.494545] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[84560.547515] wlp3s0: associate with 6c:9c:ed:b4:12:70 (try 1/3)
>[84560.553793] wlp3s0: RX AssocResp from 6c:9c:ed:b4:12:70 (capab=0x431 status=0 aid=2)
>[84560.578299] wlp3s0: associated
>[84560.579430] cfg80211: Calling CRDA for country: US
>[84560.583322] cfg80211: Regulatory domain changed to country: US
>[84560.583328] cfg80211:  DFS Master region: unset
>[84560.583331] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[84560.583334] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[84560.583337] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[84560.583339] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[84560.583341] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[84560.583344] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[87190.321137] wlp3s0: authenticate with 6c:9c:ed:b5:58:b0
>[87190.333030] wlp3s0: send auth to 6c:9c:ed:b5:58:b0 (try 1/3)
>[87190.335703] cfg80211: Calling CRDA to update world regulatory domain
>[87190.341210] wlp3s0: authenticated
>[87190.341682] wlp3s0: associate with 6c:9c:ed:b5:58:b0 (try 1/3)
>[87190.347610] wlp3s0: RX AssocResp from 6c:9c:ed:b5:58:b0 (capab=0x431 status=0 aid=1)
>[87190.349858] cfg80211: World regulatory domain updated:
>[87190.349864] cfg80211:  DFS Master region: unset
>[87190.349866] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[87190.349869] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[87190.349872] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[87190.349874] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[87190.349876] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[87190.349878] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[87190.349880] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[87190.349905] cfg80211: Calling CRDA for country: US
>[87190.354817] cfg80211: Regulatory domain changed to country: US
>[87190.354822] cfg80211:  DFS Master region: unset
>[87190.354825] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[87190.354828] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[87190.354830] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[87190.354832] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[87190.354834] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[87190.354837] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[87190.375796] wlp3s0: associated
>[87190.375910] cfg80211: Calling CRDA for country: US
>[87190.379484] cfg80211: Regulatory domain changed to country: US
>[87190.379490] cfg80211:  DFS Master region: unset
>[87190.379493] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[87190.379496] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[87190.379499] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[87190.379501] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[87190.379504] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[87190.379506] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[87854.760213] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[88039.546126] wlp3s0: authenticate with 24:b6:57:7b:a9:20
>[88039.551455] wlp3s0: send auth to 24:b6:57:7b:a9:20 (try 1/3)
>[88039.554678] cfg80211: Calling CRDA to update world regulatory domain
>[88039.555684] wlp3s0: authenticated
>[88039.556033] wlp3s0: associate with 24:b6:57:7b:a9:20 (try 1/3)
>[88039.565331] wlp3s0: RX AssocResp from 24:b6:57:7b:a9:20 (capab=0x431 status=0 aid=3)
>[88039.568976] cfg80211: World regulatory domain updated:
>[88039.568982] cfg80211:  DFS Master region: unset
>[88039.568984] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[88039.568987] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[88039.568989] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[88039.568991] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[88039.568993] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[88039.569016] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[88039.569021] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[88039.569057] cfg80211: Calling CRDA for country: US
>[88039.573679] cfg80211: Regulatory domain changed to country: US
>[88039.573684] cfg80211:  DFS Master region: unset
>[88039.573686] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[88039.573689] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[88039.573691] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[88039.573693] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[88039.573694] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[88039.573696] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[88039.586829] wlp3s0: associated
>[88039.586931] cfg80211: Calling CRDA for country: US
>[88039.590031] cfg80211: Regulatory domain changed to country: US
>[88039.590035] cfg80211:  DFS Master region: unset
>[88039.590037] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[88039.590039] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[88039.590041] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[88039.590043] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[88039.590045] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[88039.590046] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[91518.546846] wlp3s0: authenticate with 6c:9c:ed:b4:12:70
>[91518.554007] wlp3s0: send auth to 6c:9c:ed:b4:12:70 (try 1/3)
>[91518.554210] cfg80211: Calling CRDA to update world regulatory domain
>[91518.558495] wlp3s0: authenticated
>[91518.559624] wlp3s0: associate with 6c:9c:ed:b4:12:70 (try 1/3)
>[91518.564296] wlp3s0: RX AssocResp from 6c:9c:ed:b4:12:70 (capab=0x431 status=0 aid=2)
>[91518.568970] cfg80211: World regulatory domain updated:
>[91518.568976] cfg80211:  DFS Master region: unset
>[91518.568978] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[91518.568982] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[91518.568984] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[91518.568986] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[91518.568988] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[91518.568990] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[91518.568993] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[91518.569015] cfg80211: Calling CRDA for country: US
>[91518.573947] cfg80211: Regulatory domain changed to country: US
>[91518.573953] cfg80211:  DFS Master region: unset
>[91518.573955] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[91518.573959] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[91518.573961] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[91518.573963] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[91518.573965] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[91518.573967] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[91518.584914] wlp3s0: associated
>[91518.585031] cfg80211: Calling CRDA for country: US
>[91518.587992] cfg80211: Regulatory domain changed to country: US
>[91518.587997] cfg80211:  DFS Master region: unset
>[91518.587999] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[91518.588002] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[91518.588004] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[91518.588006] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[91518.588007] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[91518.588009] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[91760.337044] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[91773.058976] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[93769.553643] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[93806.814716] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[95641.575621] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[97324.048937] wlp3s0: deauthenticated from 6c:9c:ed:b4:12:70 (Reason: 15)
>[97324.080995] cfg80211: Calling CRDA to update world regulatory domain
>[97324.095908] cfg80211: World regulatory domain updated:
>[97324.095916] cfg80211:  DFS Master region: unset
>[97324.095920] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[97324.095925] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[97324.095929] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[97324.095933] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[97324.095937] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[97324.095941] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[97324.095945] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[97324.095982] cfg80211: Calling CRDA for country: US
>[97324.101482] cfg80211: Regulatory domain changed to country: US
>[97324.101488] cfg80211:  DFS Master region: unset
>[97324.101490] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[97324.101494] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[97324.101496] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[97324.101498] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[97324.101501] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[97324.101503] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[97324.291080] wlp3s0: authenticate with 6c:9c:ed:b5:58:b0
>[97324.294138] wlp3s0: send auth to 6c:9c:ed:b5:58:b0 (try 1/3)
>[97324.297326] wlp3s0: authenticated
>[97324.297554] wlp3s0: waiting for beacon from 6c:9c:ed:b5:58:b0
>[97324.305605] wlp3s0: associate with 6c:9c:ed:b5:58:b0 (try 1/3)
>[97324.313649] wlp3s0: RX AssocResp from 6c:9c:ed:b5:58:b0 (capab=0x431 status=0 aid=1)
>[97324.336846] wlp3s0: associated
>[97324.336953] cfg80211: Calling CRDA for country: US
>[97324.340715] cfg80211: Regulatory domain changed to country: US
>[97324.340721] cfg80211:  DFS Master region: unset
>[97324.340724] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[97324.340727] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[97324.340730] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[97324.340732] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[97324.340734] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[97324.340737] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[98092.839154] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[98098.059741] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[98619.999112] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[98627.419193] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[98630.415663] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[98679.066781] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[99301.888845] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[99568.255666] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[99795.872569] wlp3s0: authenticate with 2c:3f:38:f7:67:90
>[99795.877838] wlp3s0: send auth to 2c:3f:38:f7:67:90 (try 1/3)
>[99795.878033] cfg80211: Calling CRDA to update world regulatory domain
>[99795.881075] wlp3s0: authenticated
>[99795.881432] wlp3s0: waiting for beacon from 2c:3f:38:f7:67:90
>[99795.884925] cfg80211: World regulatory domain updated:
>[99795.884930] cfg80211:  DFS Master region: unset
>[99795.884933] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[99795.884936] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[99795.884938] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[99795.884940] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[99795.884942] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[99795.884945] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[99795.884947] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[99795.884970] cfg80211: Calling CRDA for country: US
>[99795.889177] cfg80211: Regulatory domain changed to country: US
>[99795.889183] cfg80211:  DFS Master region: unset
>[99795.889185] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[99795.889189] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[99795.889191] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[99795.889193] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[99795.889195] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[99795.889197] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[99795.944522] wlp3s0: associate with 2c:3f:38:f7:67:90 (try 1/3)
>[99795.949345] wlp3s0: RX AssocResp from 2c:3f:38:f7:67:90 (capab=0x431 status=0 aid=1)
>[99795.976140] wlp3s0: associated
>[99795.976276] cfg80211: Calling CRDA for country: US
>[99795.980305] cfg80211: Regulatory domain changed to country: US
>[99795.980311] cfg80211:  DFS Master region: unset
>[99795.980314] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[99795.980317] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[99795.980320] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[99795.980322] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[99795.980324] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[99795.980327] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[100317.677952] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[102620.239612] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
>[102620.239622] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
>[102620.240264] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
>[102620.240272] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
>[102623.500453] thinkpad_acpi: EC reports that Thermal Table has changed
>[102624.731226] wlp3s0: deauthenticating from 2c:3f:38:f7:67:90 by local choice (reason=3)
>[102624.765970] cfg80211: Calling CRDA to update world regulatory domain
>[102624.772676] cfg80211: World regulatory domain updated:
>[102624.772683] cfg80211:  DFS Master region: unset
>[102624.772686] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[102624.772689] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[102624.772692] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[102624.772694] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>[102624.772697] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[102624.772699] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
>[102624.772701] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
>[102624.772958] cfg80211: Calling CRDA for country: US
>[102624.777338] cfg80211: Regulatory domain changed to country: US
>[102624.777344] cfg80211:  DFS Master region: unset
>[102624.777347] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[102624.777350] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[102624.777353] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
>[102624.777355] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
>[102624.777357] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
>[102624.777360] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
>[102624.915908] PM: Syncing filesystems ... done.
>[102626.193092] PM: Preparing system for mem sleep
>[102626.523731] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[102626.527935] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[102626.531063] PM: Entering mem sleep
>[102626.531209] Suspending console(s) (use no_console_suspend to debug)
>[102626.534094] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
>[102626.534233] sd 2:0:0:0: [sdb] Stopping disk
>[102626.665027] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[102626.665388] sd 0:0:0:0: [sda] Stopping disk
>[102626.886993] nouveau  [     DRM] suspending display...
>[102626.887013] nouveau  [     DRM] unpinning framebuffer(s)...
>[102626.887142] nouveau  [     DRM] evicting buffers...
>[102627.460878] nouveau  [     DRM] waiting for kernel channels to go idle...
>[102627.460899] nouveau  [     DRM] suspending client object trees...
>[102627.473627] nouveau  [     DRM] suspending kernel object tree...
>[102629.674007] PM: suspend of devices complete after 3141.235 msecs
>[102629.674360] PM: late suspend of devices complete after 0.349 msecs
>[102629.685859] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[102629.696993] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[102629.707757] e1000e 0000:00:19.0: System wakeup enabled by ACPI
>[102629.729749] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[102629.740806] PM: noirq suspend of devices complete after 66.464 msecs
>[102629.741493] ACPI: Preparing to enter system sleep state S3
>[102629.744589] PM: Saving platform NVS memory
>[102629.745885] Disabling non-boot CPUs ...
>[102629.747652] smpboot: CPU 1 is now offline
>[102629.750052] smpboot: CPU 2 is now offline
>[102629.751981] smpboot: CPU 3 is now offline
>[102629.754148] smpboot: CPU 4 is now offline
>[102629.756659] smpboot: CPU 5 is now offline
>[102629.759187] smpboot: CPU 6 is now offline
>[102629.761158] smpboot: CPU 7 is now offline
>[102629.763817] ACPI: Low-level resume complete
>[102629.763873] PM: Restoring platform NVS memory
>[102629.764538] Enabling non-boot CPUs ...
>[102629.764610] x86: Booting SMP configuration:
>[102629.764611] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[102629.779241] Intel pstate controlling: cpu 1
>[102629.779538] CPU1 is up
>[102629.779575] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[102629.793885] Intel pstate controlling: cpu 2
>[102629.793978] CPU2 is up
>[102629.794010] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[102629.808374] Intel pstate controlling: cpu 3
>[102629.808464] CPU3 is up
>[102629.808498] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[102629.822855] Intel pstate controlling: cpu 4
>[102629.822948] CPU4 is up
>[102629.822980] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[102629.837391] Intel pstate controlling: cpu 5
>[102629.837480] CPU5 is up
>[102629.837512] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[102629.851936] Intel pstate controlling: cpu 6
>[102629.852026] CPU6 is up
>[102629.852058] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[102629.866552] Intel pstate controlling: cpu 7
>[102629.866643] CPU7 is up
>[102629.880599] ACPI: Waking up from system sleep state S3
>[102629.928389] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[102629.972353] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[102629.994347] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[102630.038434] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[102630.061107] PM: noirq resume of devices complete after 143.544 msecs
>[102630.061367] PM: early resume of devices complete after 0.222 msecs
>[102630.061493] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
>[102630.061502] e1000e 0000:00:19.0: System wakeup disabled by ACPI
>[102630.061577] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[102630.061725] nouveau  [     DRM] re-enabling device...
>[102630.061834] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[102630.061843] nouveau  [     DRM] resuming kernel object tree...
>[102630.061899] nouveau  [   VBIOS][0000:01:00.0] running init tables
>[102630.096289] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
>[102630.269311] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci
>[102630.371194] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[102630.371221] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[102630.372596] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[102630.372686] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[102630.372691] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[102630.373196] ata5: SATA link down (SStatus 0 SControl 300)
>[102630.373334] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[102630.373338] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[102630.373466] ata3.00: configured for UDMA/133
>[102630.373502] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[102630.373644] sd 2:0:0:0: [sdb] Starting disk
>[102630.375769] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[102630.376429] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[102630.376721] ata2.00: configured for UDMA/100
>[102630.427261] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci
>[102630.517186] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 875000uv
>[102630.517191] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
>[102630.517357] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz memory 648 MHz 
>[102630.523876] nouveau  [     DRM] resuming client object trees...
>[102630.532197] nouveau  [     DRM] resuming display...
>[102630.585249] usb 1-1.6: reset high-speed USB device number 6 using ehci-pci
>[102630.806039] firewire_core 0000:02:00.3: rediscovered device fw0
>[102632.354681] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[102632.355662] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[102632.355666] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[102632.357598] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[102632.357601] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[102632.358518] ata1.00: configured for UDMA/133
>[102632.358881] sd 0:0:0:0: [sda] Starting disk
>[102632.385937] PM: resume of devices complete after 2325.296 msecs
>[102632.514535] PM: Finishing wakeup.
>[102632.514537] Restarting tasks ... done.
>[102632.534602] video LNXVIDEO:01: Restoring backlight state
>[102632.630699] ------------[ cut here ]------------
>[102632.630740] WARNING: CPU: 4 PID: 28511 at drivers/gpu/drm/drm_crtc.c:2074 drm_mode_set_config_internal+0xd6/0xe0 [drm]()
>[102632.630742] Modules linked in: vfat fat usb_storage tun ccm fuse ip6t_rpfilter ip6t_REJECT xt_conntrack bnep ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat binfmt_misc nf_conntrack iptable_mangle iptable_security iptable_raw arc4 iwldvm mac80211 iTCO_wdt uvcvideo x86_pkg_temp_thermal iTCO_vendor_support snd_hda_codec_hdmi videobuf2_vmalloc videobuf2_memops snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel sdhci_pci sdhci mmc_core iwlwifi btusb videobuf2_core videodev e1000e snd_hda_codec media snd_hwdep snd_seq cfg80211 snd_seq_device joydev snd_pcm bluetooth 6lowpan_iphc ptp pps_core
>[102632.630787]  shpchp thinkpad_acpi coretemp nfsd auth_rpcgss i2c_i801 serio_raw kvm tpm_tis mei_me mei lpc_ich mfd_core nfs_acl lockd sunrpc snd_timer microcode snd soundcore rfkill tpm dm_crypt nouveau crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel mxm_wmi i2c_algo_bit drm_kms_helper firewire_ohci ttm firewire_core drm crc_itu_t i2c_core wmi video
>[102632.630814] CPU: 4 PID: 28511 Comm: Xorg Not tainted 3.14.3-200.fc20.x86_64 #1
>[102632.630816] Hardware name: LENOVO 2436CTO/2436CTO, BIOS G5ET98WW (2.58 ) 04/01/2014
>[102632.630818]  0000000000000000 0000000084bbda6c ffff8807cfd67c80 ffffffff816ef242
>[102632.630823]  0000000000000000 ffff8807cfd67cb8 ffffffff8108a1bd ffff880786addb00
>[102632.630827]  0000000000000000 ffff8807ee2f0000 ffff880786addb00 0000000000000013
>[102632.630831] Call Trace:
>[102632.630841]  [<ffffffff816ef242>] dump_stack+0x45/0x56
>[102632.630848]  [<ffffffff8108a1bd>] warn_slowpath_common+0x7d/0xa0
>[102632.630852]  [<ffffffff8108a2ea>] warn_slowpath_null+0x1a/0x20
>[102632.630868]  [<ffffffffa0034ab6>] drm_mode_set_config_internal+0xd6/0xe0 [drm]
>[102632.630885]  [<ffffffffa0037907>] drm_mode_setcrtc+0x107/0x610 [drm]
>[102632.630898]  [<ffffffffa0028bf2>] drm_ioctl+0x4f2/0x620 [drm]
>[102632.630943]  [<ffffffffa019291e>] nouveau_drm_ioctl+0x4e/0x90 [nouveau]
>[102632.630949]  [<ffffffff811fcc30>] do_vfs_ioctl+0x2e0/0x4a0
>[102632.630953]  [<ffffffff811fce71>] SyS_ioctl+0x81/0xa0
>[102632.630958]  [<ffffffff81121c76>] ? __audit_syscall_exit+0x1f6/0x2a0
>[102632.630963]  [<ffffffff816ff5e9>] system_call_fastpath+0x16/0x1b
>[102632.630965] ---[ end trace e55373b66bf864f9 ]---
>[102632.793680] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[102632.894463] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>[102632.895299] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[102632.896246] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[102632.902909] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
>[102632.981945] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
>[102633.375899] nouveau E[   PDISP][0000:01:00.0] chid 0 mthd 0x0080 data 0x00000000 0x00005080 0x0000200d
>[102633.905630] nouveau E[   PDISP][0000:01:00.0] chid 0 mthd 0x0080 data 0x00000000 0x10005080 0x0000200d
>[102633.905685] nouveau E[   PDISP][0000:01:00.0] chid 0 mthd 0x0080 data 0x00000000 0x10005080 0x0000200d
>[102635.904229] nouveau E[   PDISP][0000:01:00.0] chid 0 mthd 0x0080 data 0x00000000 0x10005080 0x0000200d
>[102635.904381] nouveau E[   PDISP][0000:01:00.0] chid 1 mthd 0x0080 data 0x00000000 0x00005080 0x0000000d
>[102636.382413] wlp3s0: authenticate with 48:f8:b3:06:35:98
>[102636.390034] wlp3s0: send auth to 48:f8:b3:06:35:98 (try 1/3)
>[102636.399706] wlp3s0: authenticated
>[102636.400265] wlp3s0: associate with 48:f8:b3:06:35:98 (try 1/3)
>[102636.403641] wlp3s0: RX AssocResp from 48:f8:b3:06:35:98 (capab=0x411 status=0 aid=2)
>[102636.427656] wlp3s0: associated
>[102636.427686] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
>[102638.051155] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
>[102640.258326] nouveau E[   PDISP][0000:01:00.0] chid 0 mthd 0x0080 data 0x00000000 0x10005080 0x0000200d

Actions: View

Attachments on bug 1098567: 896430