Attachment 901631 Details for Bug 1028397 – "kdumpctl restart" shell trace

"kdumpctl restart" shell trace

kdumpctl.out (text/plain), 75.80 KB, created by Jeremy Harris on 2014-06-03 08:14:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jeremy Harris

Created: 2014-06-03 08:14:19 UTC

Size: 75.80 KB

patch

obsolete

>+ KEXEC=/sbin/kexec
>+ KDUMP_KERNELVER=
>+ KDUMP_COMMANDLINE=
>+ KEXEC_ARGS=
>+ KDUMP_CONFIG_FILE=/etc/kdump.conf
>+ MKDUMPRD='/sbin/mkdumprd -f'
>+ SAVE_PATH=/var/crash
>+ SSH_KEY_LOCATION=/root/.ssh/kdump_id_rsa
>+ DUMP_TARGET=
>+ . /lib/kdump/kdump-lib.sh
>++ FENCE_KDUMP_CONFIG_FILE=/etc/sysconfig/fence_kdump
>++ FENCE_KDUMP_SEND=/usr/libexec/fence_kdump_send
>+ standard_kexec_args=-p
>+ '[' -f /etc/sysconfig/kdump ']'
>+ . /etc/sysconfig/kdump
>++ KDUMP_KERNELVER=
>++ KDUMP_COMMANDLINE=
>++ KDUMP_COMMANDLINE_APPEND='irqpoll nr_cpus=1 reset_devices cgroup_disable=memory mce=off numa=off udev.children-max=2 panic=10 rootflags=nofail'
>++ KEXEC_ARGS=
>++ KDUMP_BOOTDIR=/boot
>++ KDUMP_IMG=vmlinuz
>++ KDUMP_IMG_EXT=
>+ '[' '!' -f /etc/kdump.conf ']'
>+ single_instance_lock
>+ exec
>+ flock 9
>+ exec
>+ main restart
>+ case "$1" in
>+ stop
>+ /sbin/kexec -p -u
>Memory for crashkernel is not reserved
>Please reserve memory by passing "crashkernel=X@Y" parameter to the kernel
>+ '[' 1 == 0 ']'
>+ echo 'kexec: failed to unloaded kdump kernel'
>kexec: failed to unloaded kdump kernel
>+ echo 'Stopping kdump: [FAILED]'
>Stopping kdump: [FAILED]
>+ return 1
>+ start
>+ check_config
>+ local nr
>++ awk 'BEGIN{cnt=0} /^raw|^ssh[[:blank:]]|^nfs|^ext[234]|^xfs|^btrfs|^minix/{cnt++} END{print cnt}' /etc/kdump.conf
>+ nr=0
>+ '[' 0 -gt 1 ']'
>+ read config_opt config_val
>++ strip_comments Configures where to put the kdump /proc/vmcore files
>++ echo Configures where to put the kdump /proc/vmcore files
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Configures where to put the kdump /proc/vmcore files'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments This file contains a series of commands to perform '(in' 'order)' when a
>++ sed -e 's/$.*$#.*/\1/'
>++ echo This file contains a series of commands to perform '(in' 'order)' when a
>+ config_val='This file contains a series of commands to perform (in order) when a'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments kernel crash has happened and the kdump kernel has been loaded. Directives in
>++ echo kernel crash has happened and the kdump kernel has been loaded. Directives in
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='kernel crash has happened and the kdump kernel has been loaded. Directives in'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments this file are only applicable to the kdump initramfs, and have no effect if
>++ echo this file are only applicable to the kdump initramfs, and have no effect if
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='this file are only applicable to the kdump initramfs, and have no effect if'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments the root filesystem is mounted and the normal init scripts are processed
>++ echo the root filesystem is mounted and the normal init scripts are processed
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='the root filesystem is mounted and the normal init scripts are processed'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Currently only one dump target and path may be configured at once
>++ sed -e 's/$.*$#.*/\1/'
>++ echo Currently only one dump target and path may be configured at once
>+ config_val='Currently only one dump target and path may be configured at once'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments if the configured dump target fails, the default action will be preformed
>++ echo if the configured dump target fails, the default action will be preformed
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='if the configured dump target fails, the default action will be preformed'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments the default action may be configured with the default directive below. If the
>++ echo the default action may be configured with the default directive below. If the
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='the default action may be configured with the default directive below. If the'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments configured dump target succedes
>++ echo configured dump target succedes
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='configured dump target succedes'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Basics commands supported are:
>++ echo Basics commands supported are:
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Basics commands supported are:'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments raw '<partition>' - Will dd /proc/vmcore into '<partition>.'
>++ echo raw '<partition>' - Will dd /proc/vmcore into '<partition>.'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='raw <partition> - Will dd /proc/vmcore into <partition>.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Use persistent device names for partition devices,
>++ echo Use persistent device names for partition devices,
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Use persistent device names for partition devices,'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments such as '/dev/vg/<devname>.'
>++ echo such as '/dev/vg/<devname>.'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='such as /dev/vg/<devname>.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments nfs '<nfs' 'mount>' - Will mount fs and copy /proc/vmcore to
>++ echo nfs '<nfs' 'mount>' - Will mount fs and copy /proc/vmcore to
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='nfs <nfs mount> - Will mount fs and copy /proc/vmcore to'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments '<mnt>/var/crash/%HOST-%DATE/,' supports DNS.
>++ echo '<mnt>/var/crash/%HOST-%DATE/,' supports DNS.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='<mnt>/var/crash/%HOST-%DATE/, supports DNS.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments ssh '<user@server>' - Will scp /proc/vmcore to
>++ echo ssh '<user@server>' - Will scp /proc/vmcore to
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='ssh <user@server> - Will scp /proc/vmcore to'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments '<user@server>:/var/crash/%HOST-%DATE/,' supports DNS
>++ echo '<user@server>:/var/crash/%HOST-%DATE/,' supports DNS
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='<user@server>:/var/crash/%HOST-%DATE/, supports DNS'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments NOTE: make sure user has necessary write
>++ echo NOTE: make sure user has necessary write
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='NOTE: make sure user has necessary write'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments permissions on server
>++ echo permissions on server
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='permissions on server'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments sshkey '<path>' - Will use the sshkey to do ssh dump
>++ echo sshkey '<path>' - Will use the sshkey to do ssh dump
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='sshkey <path> - Will use the sshkey to do ssh dump'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Specifies the path of the ssh key you want to use
>++ echo Specifies the path of the ssh key you want to use
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Specifies the path of the ssh key you want to use'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments when do ssh dump, the default value is
>++ echo when do ssh dump, the default value is
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='when do ssh dump, the default value is'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /root/.ssh/kdump_id_rsa.
>++ echo /root/.ssh/kdump_id_rsa.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/root/.ssh/kdump_id_rsa.
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments '<fs' 'type>' '<partition>' - Will mount -t '<fs' 'type>' '<partition>' /mnt and copy
>++ echo '<fs' 'type>' '<partition>' - Will mount -t '<fs' 'type>' '<partition>' /mnt and copy
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='<fs type> <partition> - Will mount -t <fs type> <partition> /mnt and copy'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /proc/vmcore to /mnt/var/crash/%DATE/.
>++ echo /proc/vmcore to /mnt/var/crash/%DATE/.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='/proc/vmcore to /mnt/var/crash/%DATE/.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments NOTE: '<partition>' can be a device node, label or uuid.
>++ echo NOTE: '<partition>' can be a device node, label or uuid.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='NOTE: <partition> can be a device node, label or uuid.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments 'It'\''s' recommended to use persistent device names
>++ echo 'It'\''s' recommended to use persistent device names
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='It'\''s recommended to use persistent device names'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments such as '/dev/vg/<devname>.'
>++ echo such as '/dev/vg/<devname>.'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='such as /dev/vg/<devname>.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Otherwise 'it'\''s' suggested to use label or uuid.
>++ echo Otherwise 'it'\''s' suggested to use label or uuid.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Otherwise it'\''s suggested to use label or uuid.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments path '<path>' - Append path to the filesystem device which you are
>++ sed -e 's/$.*$#.*/\1/'
>++ echo path '<path>' - Append path to the filesystem device which you are
>+ config_val='path <path> - Append path to the filesystem device which you are'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments dumping to. Ignored for raw device dumps.
>++ echo dumping to. Ignored for raw device dumps.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='dumping to. Ignored for raw device dumps.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments If unset, will default to /var/crash.
>++ echo If unset, will default to /var/crash.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='If unset, will default to /var/crash.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments core_collector '<command>' '<options>'
>++ echo core_collector '<command>' '<options>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='core_collector <command> <options>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - This allows you to specify the command to copy
>++ sed -e 's/$.*$#.*/\1/'
>++ echo - This allows you to specify the command to copy
>+ config_val='- This allows you to specify the command to copy'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments the vmcore. You could use the dump filtering
>++ echo the vmcore. You could use the dump filtering
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='the vmcore. You could use the dump filtering'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments program makedumpfile, the default one, to retrieve
>++ sed -e 's/$.*$#.*/\1/'
>++ echo program makedumpfile, the default one, to retrieve
>+ config_val='program makedumpfile, the default one, to retrieve'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments your core, which on some arches can drastically
>++ echo your core, which on some arches can drastically
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='your core, which on some arches can drastically'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments reduce core file size. See /sbin/makedumpfile --help
>++ echo reduce core file size. See /sbin/makedumpfile --help
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='reduce core file size. See /sbin/makedumpfile --help'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments for a list of options. Note that the -i and -g
>++ sed -e 's/$.*$#.*/\1/'
>++ echo for a list of options. Note that the -i and -g
>+ config_val='for a list of options. Note that the -i and -g'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments options are not needed here, as the initrd will
>++ sed -e 's/$.*$#.*/\1/'
>++ echo options are not needed here, as the initrd will
>+ config_val='options are not needed here, as the initrd will'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments automatically be populated with a config file
>++ echo automatically be populated with a config file
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='automatically be populated with a config file'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments appropriate for the running kernel.
>++ echo appropriate for the running kernel.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='appropriate for the running kernel.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Default core_collector for raw/ssh dump is:
>++ echo Default core_collector for raw/ssh dump is:
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Default core_collector for raw/ssh dump is:'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments '"makedumpfile' -F -l --message-level 1 -d '31".'
>++ echo '"makedumpfile' -F -l --message-level 1 -d '31".'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='"makedumpfile -F -l --message-level 1 -d 31".'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Default core_collector for other targets is:
>++ echo Default core_collector for other targets is:
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Default core_collector for other targets is:'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments '"makedumpfile' -l --message-level 1 -d '31".'
>++ echo '"makedumpfile' -l --message-level 1 -d '31".'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='"makedumpfile -l --message-level 1 -d 31".'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments For core_collector format details please refer to
>++ echo For core_collector format details please refer to
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='For core_collector format details please refer to'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments kexec-kdump-howto.txt or kdump.conf manpage.
>++ echo kexec-kdump-howto.txt or kdump.conf manpage.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='kexec-kdump-howto.txt or kdump.conf manpage.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments kdump_post '<binary' '|' 'script>'
>++ echo kdump_post '<binary' '|' 'script>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='kdump_post <binary | script>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - This directive allows you to run a specified
>++ echo - This directive allows you to run a specified
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- This directive allows you to run a specified'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments executable just after the memory dump process
>++ echo executable just after the memory dump process
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='executable just after the memory dump process'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments terminates. The exit status from the dump process
>++ echo terminates. The exit status from the dump process
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='terminates. The exit status from the dump process'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments is fed to the kdump_post executable, which can be
>++ echo is fed to the kdump_post executable, which can be
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='is fed to the kdump_post executable, which can be'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments used to trigger different actions for success or
>++ sed -e 's/$.*$#.*/\1/'
>++ echo used to trigger different actions for success or
>+ config_val='used to trigger different actions for success or'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments failure.
>++ echo failure.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=failure.
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ sed -e 's/$.*$#.*/\1/'
>++ echo
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments kdump_pre '<binary' '|' 'script>'
>++ echo kdump_pre '<binary' '|' 'script>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='kdump_pre <binary | script>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - works just like the kdump_post directive, but instead
>++ echo - works just like the kdump_post directive, but instead
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- works just like the kdump_post directive, but instead'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments of running after the dump process, runs immediately
>++ echo of running after the dump process, runs immediately
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='of running after the dump process, runs immediately'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments before. Exit status of this binary is interpreted
>++ sed -e 's/$.*$#.*/\1/'
>++ echo before. Exit status of this binary is interpreted
>+ config_val='before. Exit status of this binary is interpreted'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments as follows:
>++ sed -e 's/$.*$#.*/\1/'
>++ echo as follows:
>+ config_val='as follows:'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments 0 - continue with dump process as usual
>++ echo 0 - continue with dump process as usual
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='0 - continue with dump process as usual'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments non 0 - reboot the system
>++ echo non 0 - reboot the system
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='non 0 - reboot the system'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments extra_bins '<binaries' '|' shell 'scripts>'
>++ echo extra_bins '<binaries' '|' shell 'scripts>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='extra_bins <binaries | shell scripts>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - This directive allows you to specify additional
>++ echo - This directive allows you to specify additional
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- This directive allows you to specify additional'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments binaries or shell scripts 'you'\''d' like to include in
>++ echo binaries or shell scripts 'you'\''d' like to include in
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='binaries or shell scripts you'\''d like to include in'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments your kdump initrd. Generally only useful in
>++ sed -e 's/$.*$#.*/\1/'
>++ echo your kdump initrd. Generally only useful in
>+ config_val='your kdump initrd. Generally only useful in'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments conjunction with a kdump_post binary or script that
>++ echo conjunction with a kdump_post binary or script that
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='conjunction with a kdump_post binary or script that'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments relies on other binaries or scripts.
>++ echo relies on other binaries or scripts.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='relies on other binaries or scripts.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments extra_modules '<module(s)>'
>++ echo extra_modules '<module(s)>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='extra_modules <module(s)>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - This directive allows you to specify extra kernel
>++ echo - This directive allows you to specify extra kernel
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- This directive allows you to specify extra kernel'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments modules that you want to be loaded in the kdump
>++ echo modules that you want to be loaded in the kdump
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='modules that you want to be loaded in the kdump'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments initrd, typically used to set up access to
>++ echo initrd, typically used to set up access to
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='initrd, typically used to set up access to'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments non-boot-path dump targets that might otherwise
>++ echo non-boot-path dump targets that might otherwise
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='non-boot-path dump targets that might otherwise'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments not be accessible in the kdump environment. Multiple
>++ echo not be accessible in the kdump environment. Multiple
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='not be accessible in the kdump environment. Multiple'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments modules can be listed, separated by a space, and any
>++ sed -e 's/$.*$#.*/\1/'
>++ echo modules can be listed, separated by a space, and any
>+ config_val='modules can be listed, separated by a space, and any'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments dependent modules will automatically be included.
>++ echo dependent modules will automatically be included.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='dependent modules will automatically be included.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments default '<reboot' '|' halt '|' poweroff '|' shell '|' 'dump_to_rootfs>'
>++ echo default '<reboot' '|' halt '|' poweroff '|' shell '|' 'dump_to_rootfs>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='default <reboot | halt | poweroff | shell | dump_to_rootfs>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - Action to preform in case dumping to intended target
>++ echo - Action to preform in case dumping to intended target
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- Action to preform in case dumping to intended target'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments fails. If no default action is specified, '"reboot"'
>++ sed -e 's/$.*$#.*/\1/'
>++ echo fails. If no default action is specified, '"reboot"'
>+ config_val='fails. If no default action is specified, "reboot"'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments is assumed default.
>++ echo is assumed default.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='is assumed default.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments reboot: If the default action is reboot simply reboot
>++ echo reboot: If the default action is reboot simply reboot
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='reboot: If the default action is reboot simply reboot'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments the system and loose the core that you are
>++ sed -e 's/$.*$#.*/\1/'
>++ echo the system and loose the core that you are
>+ config_val='the system and loose the core that you are'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments trying to retrieve.
>++ echo trying to retrieve.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='trying to retrieve.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments halt: If the default action is halt, then simply
>++ echo halt: If the default action is halt, then simply
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='halt: If the default action is halt, then simply'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments halt the system after attempting to capture
>++ echo halt the system after attempting to capture
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='halt the system after attempting to capture'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments a vmcore, regardless of success or failure.
>++ sed -e 's/$.*$#.*/\1/'
>++ echo a vmcore, regardless of success or failure.
>+ config_val='a vmcore, regardless of success or failure.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments poweroff: The system will be powered down
>++ echo poweroff: The system will be powered down
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='poweroff: The system will be powered down'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments shell: If the default action is shell, then drop to
>++ echo shell: If the default action is shell, then drop to
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='shell: If the default action is shell, then drop to'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments an shell session inside the initramfs from
>++ echo an shell session inside the initramfs from
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='an shell session inside the initramfs from'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments where you can try to record the core manually.
>++ echo where you can try to record the core manually.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='where you can try to record the core manually.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Exiting this shell reboots the system.
>++ echo Exiting this shell reboots the system.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Exiting this shell reboots the system.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Note: kdump uses bash as the default shell.
>++ echo Note: kdump uses bash as the default shell.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Note: kdump uses bash as the default shell.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments dump_to_rootfs: If non-root dump target is specified,
>++ echo dump_to_rootfs: If non-root dump target is specified,
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='dump_to_rootfs: If non-root dump target is specified,'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments the default action can be set as dump_to_rootfs.
>++ echo the default action can be set as dump_to_rootfs.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='the default action can be set as dump_to_rootfs.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments That means when dump to target fails, dump vmcore
>++ echo That means when dump to target fails, dump vmcore
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='That means when dump to target fails, dump vmcore'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments to rootfs from initramfs context and reboot.
>++ echo to rootfs from initramfs context and reboot.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='to rootfs from initramfs context and reboot.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments force_rebuild '<0' '|' '1>'
>++ echo force_rebuild '<0' '|' '1>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='force_rebuild <0 | 1>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - By default, kdump initrd only will be rebuilt when
>++ sed -e 's/$.*$#.*/\1/'
>++ echo - By default, kdump initrd only will be rebuilt when
>+ config_val='- By default, kdump initrd only will be rebuilt when'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments necessary. Specify 1 to force rebuilding kdump
>++ sed -e 's/$.*$#.*/\1/'
>++ echo necessary. Specify 1 to force rebuilding kdump
>+ config_val='necessary. Specify 1 to force rebuilding kdump'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments initrd every time when kdump service starts.
>++ echo initrd every time when kdump service starts.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='initrd every time when kdump service starts.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments '<0' '|' '1>'
>++ echo '<0' '|' '1>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='<0 | 1>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - Usually a unresettable block device 'can'\''t' be dump target.
>++ sed -e 's/$.*$#.*/\1/'
>++ echo - Usually a unresettable block device 'can'\''t' be dump target.
>+ config_val='- Usually a unresettable block device can'\''t be dump target.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Specifying 1 means though block target is unresettable, user
>++ echo Specifying 1 means though block target is unresettable, user
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Specifying 1 means though block target is unresettable, user'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments understand this situation and want to try dumping. By default,
>++ echo understand this situation and want to try dumping. By default,
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='understand this situation and want to try dumping. By default,'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments 'it'\''s' set to 0, means not to try a destined failure.
>++ echo 'it'\''s' set to 0, means not to try a destined failure.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='it'\''s set to 0, means not to try a destined failure.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments dracut_args '<arg(s)>'
>++ echo dracut_args '<arg(s)>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='dracut_args <arg(s)>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - Pass extra dracut options when rebuilding kdump
>++ echo - Pass extra dracut options when rebuilding kdump
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- Pass extra dracut options when rebuilding kdump'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments initrd.
>++ echo initrd.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=initrd.
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments fence_kdump_args '<arg(s)>'
>++ echo fence_kdump_args '<arg(s)>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='fence_kdump_args <arg(s)>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - Command line arguments for fence_kdump_send '(it' can contain
>++ echo - Command line arguments for fence_kdump_send '(it' can contain
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- Command line arguments for fence_kdump_send (it can contain'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments all valid arguments except hosts to send notification 'to).'
>++ echo all valid arguments except hosts to send notification 'to).'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='all valid arguments except hosts to send notification to).'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments fence_kdump_nodes '<node(s)>'
>++ sed -e 's/$.*$#.*/\1/'
>++ echo fence_kdump_nodes '<node(s)>'
>+ config_val='fence_kdump_nodes <node(s)>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - List of cluster 'node(s)' separated by space to send fence_kdump
>++ echo - List of cluster 'node(s)' separated by space to send fence_kdump
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- List of cluster node(s) separated by space to send fence_kdump'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments notification to '(this' option is mandatory to enable 'fence_kdump).'
>++ sed -e 's/$.*$#.*/\1/'
>++ echo notification to '(this' option is mandatory to enable 'fence_kdump).'
>+ config_val='notification to (this option is mandatory to enable fence_kdump).'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /dev/vg/lv_kdump
>++ echo /dev/vg/lv_kdump
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/dev/vg/lv_kdump
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /dev/vg/lv_kdump
>++ echo /dev/vg/lv_kdump
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/dev/vg/lv_kdump
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments LABEL=/boot
>++ echo LABEL=/boot
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=LABEL=/boot
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments UUID=03138356-5e61-4ab3-b58e-27507ac41937
>++ echo UUID=03138356-5e61-4ab3-b58e-27507ac41937
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=UUID=03138356-5e61-4ab3-b58e-27507ac41937
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments my.server.com:/export/tmp
>++ echo my.server.com:/export/tmp
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=my.server.com:/export/tmp
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments user@my.server.com
>++ echo user@my.server.com
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=user@my.server.com
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /root/.ssh/kdump_id_rsa
>++ echo /root/.ssh/kdump_id_rsa
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/root/.ssh/kdump_id_rsa
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /var/crash
>++ echo /var/crash
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/var/crash
>+ case "$config_opt" in
>+ '[' -z /var/crash ']'
>+ read config_opt config_val
>++ strip_comments makedumpfile -l --message-level 1 -d 31
>++ echo makedumpfile -l --message-level 1 -d 31
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='makedumpfile -l --message-level 1 -d 31'
>+ case "$config_opt" in
>+ '[' -z 'makedumpfile -l --message-level 1 -d 31' ']'
>+ read config_opt config_val
>++ strip_comments scp
>++ echo scp
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=scp
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /var/crash/scripts/kdump-post.sh
>++ echo /var/crash/scripts/kdump-post.sh
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/var/crash/scripts/kdump-post.sh
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /var/crash/scripts/kdump-pre.sh
>++ echo /var/crash/scripts/kdump-pre.sh
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/var/crash/scripts/kdump-pre.sh
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /usr/bin/lftp
>++ echo /usr/bin/lftp
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/usr/bin/lftp
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments gfs2
>++ echo gfs2
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=gfs2
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments shell
>++ echo shell
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=shell
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments 1
>++ echo 1
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=1
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments --omit-drivers '"cfg80211' 'snd"' --add-drivers '"ext2' 'ext3"'
>++ echo --omit-drivers '"cfg80211' 'snd"' --add-drivers '"ext2' 'ext3"'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='--omit-drivers "cfg80211 snd" --add-drivers "ext2 ext3"'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments -p 7410 -f auto -c 0 -i 10
>++ echo -p 7410 -f auto -c 0 -i 10
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='-p 7410 -f auto -c 0 -i 10'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments node1 node2
>++ echo node1 node2
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='node1 node2'
>+ case "$config_opt" in
>+ read config_opt config_val
>+ check_fence_kdump_config
>++ hostname
>+ local hostname=lap.dom.ain
>++ get_option_value fence_kdump_nodes
>++++ grep '^fence_kdump_nodes' /etc/kdump.conf
>++++ tail -1
>++++ cut '-d ' -f2-
>+++ strip_comments
>+++ echo
>+++ sed -e 's/$.*$#.*/\1/'
>++ echo
>+ local nodes=
>+ return 0
>+ return 0
>+ '[' 0 -ne 0 ']'
>+ sestatus
>+ grep -q 'SELinux status.*enabled'
>+ selinux_relabel
>+ local _path _i _attr
>++ path_to_be_relabeled
>++ local _path _target _mnt=/ _rmnt
>++ is_dump_target_configured
>++ local _target
>+++ egrep '^ext[234]|^xfs|^btrfs|^minix|^raw|^ssh|^nfs' /etc/kdump.conf
>++ _target=
>++ '[' -n '' ']'
>+++ get_save_path
>++++ grep '^path' /etc/kdump.conf
>++++ awk '{print $2}'
>+++ local _save_path=/var/crash
>+++ '[' -z /var/crash ']'
>+++ echo /var/crash
>++ _path=/var/crash
>+++ df ///var/crash
>+++ tail -1
>+++ awk '{ print $NF }'
>++ _rmnt=/
>++ '[' / == / ']'
>++ echo ///var/crash
>+ _path=///var/crash
>+ '[' -z ///var/crash ']'
>+ '[' -d ///var/crash ']'
>++ find ///var/crash
>+ for _i in '$(find $_path)'
>++ getfattr -m security.selinux ///var/crash
>+ _attr='# file: var/crash
>security.selinux'
>+ '[' -z '# file: var/crash
>security.selinux' ']'
>+ save_raw
>+ local kdump_dir
>+ local raw_target
>++ awk '$1 ~ /^raw$/ { print $2; }' /etc/kdump.conf
>+ raw_target=
>+ '[' -z '' ']'
>+ return 0
>+ '[' 0 -ne 0 ']'
>+ check_kdump_feasibility
>+ is_secure_boot_enforced
>+ local secure_boot_file setup_mode_file
>+ local secure_boot_byte setup_mode_byte
>++ find /sys/firmware/efi/efivars -name 'SecureBoot-*'
>+ secure_boot_file=
>++ find /sys/firmware/efi/efivars -name 'SetupMode-*'
>+ setup_mode_file=
>+ '[' -f '' ']'
>+ return 1
>+ '[' '!' -e /sys/kernel/kexec_crash_loaded ']'
>+ '[' 0 -ne 0 ']'
>+ check_current_kdump_status
>++ cat /sys/kernel/kexec_crash_loaded
>+ rc=0
>+ '[' 0 == 1 ']'
>+ return 1
>+ '[' 1 == 0 ']'
>+ check_ssh_config
>+ read config_opt config_val
>++ strip_comments Configures where to put the kdump /proc/vmcore files
>++ echo Configures where to put the kdump /proc/vmcore files
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Configures where to put the kdump /proc/vmcore files'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments This file contains a series of commands to perform '(in' 'order)' when a
>++ echo This file contains a series of commands to perform '(in' 'order)' when a
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='This file contains a series of commands to perform (in order) when a'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments kernel crash has happened and the kdump kernel has been loaded. Directives in
>++ echo kernel crash has happened and the kdump kernel has been loaded. Directives in
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='kernel crash has happened and the kdump kernel has been loaded. Directives in'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments this file are only applicable to the kdump initramfs, and have no effect if
>++ echo this file are only applicable to the kdump initramfs, and have no effect if
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='this file are only applicable to the kdump initramfs, and have no effect if'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments the root filesystem is mounted and the normal init scripts are processed
>++ echo the root filesystem is mounted and the normal init scripts are processed
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='the root filesystem is mounted and the normal init scripts are processed'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Currently only one dump target and path may be configured at once
>++ echo Currently only one dump target and path may be configured at once
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Currently only one dump target and path may be configured at once'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments if the configured dump target fails, the default action will be preformed
>++ echo if the configured dump target fails, the default action will be preformed
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='if the configured dump target fails, the default action will be preformed'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments the default action may be configured with the default directive below. If the
>++ echo the default action may be configured with the default directive below. If the
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='the default action may be configured with the default directive below. If the'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments configured dump target succedes
>++ echo configured dump target succedes
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='configured dump target succedes'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Basics commands supported are:
>++ echo Basics commands supported are:
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Basics commands supported are:'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments raw '<partition>' - Will dd /proc/vmcore into '<partition>.'
>++ echo raw '<partition>' - Will dd /proc/vmcore into '<partition>.'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='raw <partition> - Will dd /proc/vmcore into <partition>.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Use persistent device names for partition devices,
>++ echo Use persistent device names for partition devices,
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Use persistent device names for partition devices,'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments such as '/dev/vg/<devname>.'
>++ echo such as '/dev/vg/<devname>.'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='such as /dev/vg/<devname>.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments nfs '<nfs' 'mount>' - Will mount fs and copy /proc/vmcore to
>++ echo nfs '<nfs' 'mount>' - Will mount fs and copy /proc/vmcore to
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='nfs <nfs mount> - Will mount fs and copy /proc/vmcore to'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments '<mnt>/var/crash/%HOST-%DATE/,' supports DNS.
>++ echo '<mnt>/var/crash/%HOST-%DATE/,' supports DNS.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='<mnt>/var/crash/%HOST-%DATE/, supports DNS.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ sed -e 's/$.*$#.*/\1/'
>++ echo
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments ssh '<user@server>' - Will scp /proc/vmcore to
>++ echo ssh '<user@server>' - Will scp /proc/vmcore to
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='ssh <user@server> - Will scp /proc/vmcore to'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments '<user@server>:/var/crash/%HOST-%DATE/,' supports DNS
>++ echo '<user@server>:/var/crash/%HOST-%DATE/,' supports DNS
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='<user@server>:/var/crash/%HOST-%DATE/, supports DNS'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments NOTE: make sure user has necessary write
>++ echo NOTE: make sure user has necessary write
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='NOTE: make sure user has necessary write'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments permissions on server
>++ echo permissions on server
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='permissions on server'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments sshkey '<path>' - Will use the sshkey to do ssh dump
>++ echo sshkey '<path>' - Will use the sshkey to do ssh dump
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='sshkey <path> - Will use the sshkey to do ssh dump'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Specifies the path of the ssh key you want to use
>++ sed -e 's/$.*$#.*/\1/'
>++ echo Specifies the path of the ssh key you want to use
>+ config_val='Specifies the path of the ssh key you want to use'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments when do ssh dump, the default value is
>++ echo when do ssh dump, the default value is
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='when do ssh dump, the default value is'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /root/.ssh/kdump_id_rsa.
>++ echo /root/.ssh/kdump_id_rsa.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/root/.ssh/kdump_id_rsa.
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments '<fs' 'type>' '<partition>' - Will mount -t '<fs' 'type>' '<partition>' /mnt and copy
>++ echo '<fs' 'type>' '<partition>' - Will mount -t '<fs' 'type>' '<partition>' /mnt and copy
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='<fs type> <partition> - Will mount -t <fs type> <partition> /mnt and copy'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /proc/vmcore to /mnt/var/crash/%DATE/.
>++ sed -e 's/$.*$#.*/\1/'
>++ echo /proc/vmcore to /mnt/var/crash/%DATE/.
>+ config_val='/proc/vmcore to /mnt/var/crash/%DATE/.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments NOTE: '<partition>' can be a device node, label or uuid.
>++ echo NOTE: '<partition>' can be a device node, label or uuid.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='NOTE: <partition> can be a device node, label or uuid.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments 'It'\''s' recommended to use persistent device names
>++ echo 'It'\''s' recommended to use persistent device names
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='It'\''s recommended to use persistent device names'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments such as '/dev/vg/<devname>.'
>++ echo such as '/dev/vg/<devname>.'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='such as /dev/vg/<devname>.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Otherwise 'it'\''s' suggested to use label or uuid.
>++ echo Otherwise 'it'\''s' suggested to use label or uuid.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Otherwise it'\''s suggested to use label or uuid.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments path '<path>' - Append path to the filesystem device which you are
>++ echo path '<path>' - Append path to the filesystem device which you are
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='path <path> - Append path to the filesystem device which you are'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments dumping to. Ignored for raw device dumps.
>++ echo dumping to. Ignored for raw device dumps.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='dumping to. Ignored for raw device dumps.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments If unset, will default to /var/crash.
>++ echo If unset, will default to /var/crash.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='If unset, will default to /var/crash.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments core_collector '<command>' '<options>'
>++ echo core_collector '<command>' '<options>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='core_collector <command> <options>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - This allows you to specify the command to copy
>++ echo - This allows you to specify the command to copy
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- This allows you to specify the command to copy'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments the vmcore. You could use the dump filtering
>++ echo the vmcore. You could use the dump filtering
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='the vmcore. You could use the dump filtering'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments program makedumpfile, the default one, to retrieve
>++ echo program makedumpfile, the default one, to retrieve
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='program makedumpfile, the default one, to retrieve'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments your core, which on some arches can drastically
>++ echo your core, which on some arches can drastically
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='your core, which on some arches can drastically'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments reduce core file size. See /sbin/makedumpfile --help
>++ echo reduce core file size. See /sbin/makedumpfile --help
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='reduce core file size. See /sbin/makedumpfile --help'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments for a list of options. Note that the -i and -g
>++ echo for a list of options. Note that the -i and -g
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='for a list of options. Note that the -i and -g'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments options are not needed here, as the initrd will
>++ echo options are not needed here, as the initrd will
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='options are not needed here, as the initrd will'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments automatically be populated with a config file
>++ echo automatically be populated with a config file
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='automatically be populated with a config file'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments appropriate for the running kernel.
>++ echo appropriate for the running kernel.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='appropriate for the running kernel.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Default core_collector for raw/ssh dump is:
>++ echo Default core_collector for raw/ssh dump is:
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Default core_collector for raw/ssh dump is:'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments '"makedumpfile' -F -l --message-level 1 -d '31".'
>++ echo '"makedumpfile' -F -l --message-level 1 -d '31".'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='"makedumpfile -F -l --message-level 1 -d 31".'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Default core_collector for other targets is:
>++ echo Default core_collector for other targets is:
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Default core_collector for other targets is:'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments '"makedumpfile' -l --message-level 1 -d '31".'
>++ echo '"makedumpfile' -l --message-level 1 -d '31".'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='"makedumpfile -l --message-level 1 -d 31".'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments For core_collector format details please refer to
>++ echo For core_collector format details please refer to
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='For core_collector format details please refer to'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments kexec-kdump-howto.txt or kdump.conf manpage.
>++ echo kexec-kdump-howto.txt or kdump.conf manpage.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='kexec-kdump-howto.txt or kdump.conf manpage.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments kdump_post '<binary' '|' 'script>'
>++ echo kdump_post '<binary' '|' 'script>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='kdump_post <binary | script>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - This directive allows you to run a specified
>++ echo - This directive allows you to run a specified
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- This directive allows you to run a specified'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments executable just after the memory dump process
>++ echo executable just after the memory dump process
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='executable just after the memory dump process'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments terminates. The exit status from the dump process
>++ sed -e 's/$.*$#.*/\1/'
>++ echo terminates. The exit status from the dump process
>+ config_val='terminates. The exit status from the dump process'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments is fed to the kdump_post executable, which can be
>++ echo is fed to the kdump_post executable, which can be
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='is fed to the kdump_post executable, which can be'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments used to trigger different actions for success or
>++ echo used to trigger different actions for success or
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='used to trigger different actions for success or'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments failure.
>++ echo failure.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=failure.
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments kdump_pre '<binary' '|' 'script>'
>++ echo kdump_pre '<binary' '|' 'script>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='kdump_pre <binary | script>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - works just like the kdump_post directive, but instead
>++ echo - works just like the kdump_post directive, but instead
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- works just like the kdump_post directive, but instead'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments of running after the dump process, runs immediately
>++ echo of running after the dump process, runs immediately
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='of running after the dump process, runs immediately'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments before. Exit status of this binary is interpreted
>++ echo before. Exit status of this binary is interpreted
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='before. Exit status of this binary is interpreted'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments as follows:
>++ echo as follows:
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='as follows:'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments 0 - continue with dump process as usual
>++ echo 0 - continue with dump process as usual
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='0 - continue with dump process as usual'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments non 0 - reboot the system
>++ echo non 0 - reboot the system
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='non 0 - reboot the system'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments extra_bins '<binaries' '|' shell 'scripts>'
>++ echo extra_bins '<binaries' '|' shell 'scripts>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='extra_bins <binaries | shell scripts>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - This directive allows you to specify additional
>++ echo - This directive allows you to specify additional
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- This directive allows you to specify additional'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments binaries or shell scripts 'you'\''d' like to include in
>++ echo binaries or shell scripts 'you'\''d' like to include in
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='binaries or shell scripts you'\''d like to include in'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments your kdump initrd. Generally only useful in
>++ echo your kdump initrd. Generally only useful in
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='your kdump initrd. Generally only useful in'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments conjunction with a kdump_post binary or script that
>++ echo conjunction with a kdump_post binary or script that
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='conjunction with a kdump_post binary or script that'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments relies on other binaries or scripts.
>++ echo relies on other binaries or scripts.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='relies on other binaries or scripts.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments extra_modules '<module(s)>'
>++ echo extra_modules '<module(s)>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='extra_modules <module(s)>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - This directive allows you to specify extra kernel
>++ echo - This directive allows you to specify extra kernel
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- This directive allows you to specify extra kernel'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments modules that you want to be loaded in the kdump
>++ echo modules that you want to be loaded in the kdump
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='modules that you want to be loaded in the kdump'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments initrd, typically used to set up access to
>++ echo initrd, typically used to set up access to
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='initrd, typically used to set up access to'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments non-boot-path dump targets that might otherwise
>++ echo non-boot-path dump targets that might otherwise
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='non-boot-path dump targets that might otherwise'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments not be accessible in the kdump environment. Multiple
>++ echo not be accessible in the kdump environment. Multiple
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='not be accessible in the kdump environment. Multiple'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments modules can be listed, separated by a space, and any
>++ echo modules can be listed, separated by a space, and any
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='modules can be listed, separated by a space, and any'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments dependent modules will automatically be included.
>++ echo dependent modules will automatically be included.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='dependent modules will automatically be included.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments default '<reboot' '|' halt '|' poweroff '|' shell '|' 'dump_to_rootfs>'
>++ echo default '<reboot' '|' halt '|' poweroff '|' shell '|' 'dump_to_rootfs>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='default <reboot | halt | poweroff | shell | dump_to_rootfs>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - Action to preform in case dumping to intended target
>++ echo - Action to preform in case dumping to intended target
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- Action to preform in case dumping to intended target'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments fails. If no default action is specified, '"reboot"'
>++ echo fails. If no default action is specified, '"reboot"'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='fails. If no default action is specified, "reboot"'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments is assumed default.
>++ sed -e 's/$.*$#.*/\1/'
>++ echo is assumed default.
>+ config_val='is assumed default.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments reboot: If the default action is reboot simply reboot
>++ echo reboot: If the default action is reboot simply reboot
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='reboot: If the default action is reboot simply reboot'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments the system and loose the core that you are
>++ echo the system and loose the core that you are
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='the system and loose the core that you are'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments trying to retrieve.
>++ echo trying to retrieve.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='trying to retrieve.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments halt: If the default action is halt, then simply
>++ echo halt: If the default action is halt, then simply
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='halt: If the default action is halt, then simply'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments halt the system after attempting to capture
>++ echo halt the system after attempting to capture
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='halt the system after attempting to capture'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments a vmcore, regardless of success or failure.
>++ echo a vmcore, regardless of success or failure.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='a vmcore, regardless of success or failure.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments poweroff: The system will be powered down
>++ echo poweroff: The system will be powered down
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='poweroff: The system will be powered down'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments shell: If the default action is shell, then drop to
>++ echo shell: If the default action is shell, then drop to
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='shell: If the default action is shell, then drop to'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments an shell session inside the initramfs from
>++ echo an shell session inside the initramfs from
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='an shell session inside the initramfs from'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments where you can try to record the core manually.
>++ echo where you can try to record the core manually.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='where you can try to record the core manually.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Exiting this shell reboots the system.
>++ echo Exiting this shell reboots the system.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Exiting this shell reboots the system.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Note: kdump uses bash as the default shell.
>++ echo Note: kdump uses bash as the default shell.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Note: kdump uses bash as the default shell.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments dump_to_rootfs: If non-root dump target is specified,
>++ echo dump_to_rootfs: If non-root dump target is specified,
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='dump_to_rootfs: If non-root dump target is specified,'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments the default action can be set as dump_to_rootfs.
>++ echo the default action can be set as dump_to_rootfs.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='the default action can be set as dump_to_rootfs.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments That means when dump to target fails, dump vmcore
>++ echo That means when dump to target fails, dump vmcore
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='That means when dump to target fails, dump vmcore'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments to rootfs from initramfs context and reboot.
>++ echo to rootfs from initramfs context and reboot.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='to rootfs from initramfs context and reboot.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments force_rebuild '<0' '|' '1>'
>++ echo force_rebuild '<0' '|' '1>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='force_rebuild <0 | 1>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - By default, kdump initrd only will be rebuilt when
>++ echo - By default, kdump initrd only will be rebuilt when
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- By default, kdump initrd only will be rebuilt when'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments necessary. Specify 1 to force rebuilding kdump
>++ echo necessary. Specify 1 to force rebuilding kdump
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='necessary. Specify 1 to force rebuilding kdump'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments initrd every time when kdump service starts.
>++ echo initrd every time when kdump service starts.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='initrd every time when kdump service starts.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments '<0' '|' '1>'
>++ echo '<0' '|' '1>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='<0 | 1>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - Usually a unresettable block device 'can'\''t' be dump target.
>++ echo - Usually a unresettable block device 'can'\''t' be dump target.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- Usually a unresettable block device can'\''t be dump target.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments Specifying 1 means though block target is unresettable, user
>++ echo Specifying 1 means though block target is unresettable, user
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='Specifying 1 means though block target is unresettable, user'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments understand this situation and want to try dumping. By default,
>++ echo understand this situation and want to try dumping. By default,
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='understand this situation and want to try dumping. By default,'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments 'it'\''s' set to 0, means not to try a destined failure.
>++ echo 'it'\''s' set to 0, means not to try a destined failure.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='it'\''s set to 0, means not to try a destined failure.'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments dracut_args '<arg(s)>'
>++ echo dracut_args '<arg(s)>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='dracut_args <arg(s)>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - Pass extra dracut options when rebuilding kdump
>++ echo - Pass extra dracut options when rebuilding kdump
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- Pass extra dracut options when rebuilding kdump'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments initrd.
>++ echo initrd.
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=initrd.
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments fence_kdump_args '<arg(s)>'
>++ echo fence_kdump_args '<arg(s)>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='fence_kdump_args <arg(s)>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - Command line arguments for fence_kdump_send '(it' can contain
>++ echo - Command line arguments for fence_kdump_send '(it' can contain
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='- Command line arguments for fence_kdump_send (it can contain'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments all valid arguments except hosts to send notification 'to).'
>++ echo all valid arguments except hosts to send notification 'to).'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='all valid arguments except hosts to send notification to).'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments fence_kdump_nodes '<node(s)>'
>++ echo fence_kdump_nodes '<node(s)>'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='fence_kdump_nodes <node(s)>'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments - List of cluster 'node(s)' separated by space to send fence_kdump
>++ sed -e 's/$.*$#.*/\1/'
>++ echo - List of cluster 'node(s)' separated by space to send fence_kdump
>+ config_val='- List of cluster node(s) separated by space to send fence_kdump'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments notification to '(this' option is mandatory to enable 'fence_kdump).'
>++ echo notification to '(this' option is mandatory to enable 'fence_kdump).'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='notification to (this option is mandatory to enable fence_kdump).'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments
>++ echo
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /dev/vg/lv_kdump
>++ echo /dev/vg/lv_kdump
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/dev/vg/lv_kdump
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /dev/vg/lv_kdump
>++ echo /dev/vg/lv_kdump
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/dev/vg/lv_kdump
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments LABEL=/boot
>++ echo LABEL=/boot
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=LABEL=/boot
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments UUID=03138356-5e61-4ab3-b58e-27507ac41937
>++ echo UUID=03138356-5e61-4ab3-b58e-27507ac41937
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=UUID=03138356-5e61-4ab3-b58e-27507ac41937
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments my.server.com:/export/tmp
>++ echo my.server.com:/export/tmp
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=my.server.com:/export/tmp
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments user@my.server.com
>++ echo user@my.server.com
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=user@my.server.com
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /root/.ssh/kdump_id_rsa
>++ sed -e 's/$.*$#.*/\1/'
>++ echo /root/.ssh/kdump_id_rsa
>+ config_val=/root/.ssh/kdump_id_rsa
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /var/crash
>++ echo /var/crash
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/var/crash
>+ case "$config_opt" in
>+ SAVE_PATH=/var/crash
>+ read config_opt config_val
>++ strip_comments makedumpfile -l --message-level 1 -d 31
>++ echo makedumpfile -l --message-level 1 -d 31
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='makedumpfile -l --message-level 1 -d 31'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments scp
>++ echo scp
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=scp
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /var/crash/scripts/kdump-post.sh
>++ echo /var/crash/scripts/kdump-post.sh
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/var/crash/scripts/kdump-post.sh
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /var/crash/scripts/kdump-pre.sh
>++ echo /var/crash/scripts/kdump-pre.sh
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/var/crash/scripts/kdump-pre.sh
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments /usr/bin/lftp
>++ echo /usr/bin/lftp
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=/usr/bin/lftp
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments gfs2
>++ echo gfs2
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=gfs2
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments shell
>++ echo shell
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=shell
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments 1
>++ echo 1
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val=1
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments --omit-drivers '"cfg80211' 'snd"' --add-drivers '"ext2' 'ext3"'
>++ echo --omit-drivers '"cfg80211' 'snd"' --add-drivers '"ext2' 'ext3"'
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='--omit-drivers "cfg80211 snd" --add-drivers "ext2 ext3"'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments -p 7410 -f auto -c 0 -i 10
>++ echo -p 7410 -f auto -c 0 -i 10
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='-p 7410 -f auto -c 0 -i 10'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ strip_comments node1 node2
>++ echo node1 node2
>++ sed -e 's/$.*$#.*/\1/'
>+ config_val='node1 node2'
>+ case "$config_opt" in
>+ read config_opt config_val
>++ echo -n
>++ sed -n '/.*@/p'
>+ local SSH_TARGET=
>+ '[' -z '' ']'
>+ return 1
>+ check_rebuild
>+ local extra_modules modified_files=
>+ local _force_rebuild force_rebuild=0
>+ '[' -z '' ']'
>++ uname -r
>+ kdump_kver=3.14.4-200.fc20.x86_64
>+ kdump_kernel=/boot/vmlinuz-3.14.4-200.fc20.x86_64
>+ kdump_initrd=/boot/initramfs-3.14.4-200.fc20.x86_64kdump.img
>++ grep '^force_rebuild' /etc/kdump.conf
>+ _force_rebuild=
>+ '[' 1 -eq 0 ']'
>++ grep '^extra_modules' /etc/kdump.conf
>+ extra_modules=
>+ '[' -n '' ']'
>+ '[' -f /boot/initramfs-3.14.4-200.fc20.x86_64kdump.img ']'
>+ image_time=0
>++ get_pcs_cluster_modified_files 0
>++ local image_time=0
>++ local time_stamp
>++ local modified_files
>++ is_generic_fence_kdump
>++ '[' -x /usr/libexec/fence_kdump_send ']'
>++ return 1
>++ is_pcs_fence_kdump
>++ type -P pcs
>++ return 1
>++ return 1
>+ modified_files=
>++ grep '^kdump_post' /etc/kdump.conf
>++ cut '-d ' -f2
>+ EXTRA_BINS=
>++ grep '^kdump_pre' /etc/kdump.conf
>++ cut '-d ' -f2
>+ CHECK_FILES=
>+ EXTRA_BINS=' '
>++ grep '^extra_bins' /etc/kdump.conf
>++ cut '-d ' -f2-
>+ CHECK_FILES=
>+ EXTRA_BINS='  '
>+ files='/etc/kdump.conf /boot/vmlinuz-3.14.4-200.fc20.x86_64   '
>+ check_exist '/etc/kdump.conf /boot/vmlinuz-3.14.4-200.fc20.x86_64   '
>+ for file in '$1'
>+ '[' '!' -f /etc/kdump.conf ']'
>+ for file in '$1'
>+ '[' '!' -f /boot/vmlinuz-3.14.4-200.fc20.x86_64 ']'
>+ check_executable '  '
>+ '[' 0 -ne 0 ']'
>+ for file in '$files'
>++ stat -c %Y /etc/kdump.conf
>+ time_stamp=1398195063
>+ '[' 1398195063 -gt 0 ']'
>+ modified_files=' /etc/kdump.conf'
>+ for file in '$files'
>++ stat -c %Y /boot/vmlinuz-3.14.4-200.fc20.x86_64
>+ time_stamp=1399989416
>+ '[' 1399989416 -gt 0 ']'
>+ modified_files=' /etc/kdump.conf /boot/vmlinuz-3.14.4-200.fc20.x86_64'
>+ '[' 0 -eq 0 ']'
>+ echo -n 'No kdump initial ramdisk found.'
>No kdump initial ramdisk found.+ echo
>
>+ echo 'Rebuilding /boot/initramfs-3.14.4-200.fc20.x86_64kdump.img'
>Rebuilding /boot/initramfs-3.14.4-200.fc20.x86_64kdump.img
>+ rebuild_initrd
>+ /sbin/mkdumprd -f /boot/initramfs-3.14.4-200.fc20.x86_64kdump.img 3.14.4-200.fc20.x86_64
>+ '[' 0 '!=' 0 ']'
>+ return 0
>+ '[' 0 '!=' 0 ']'
>+ load_kdump
>++ cat /sys/kernel/kexec_crash_size
>+ MEM_RESERVED=0
>+ '[' 0 -eq 0 ']'
>+ echo 'No memory reserved for crash kernel.'
>No memory reserved for crash kernel.
>+ return 1
>+ '[' 1 '!=' 0 ']'
>+ echo 'Starting kdump: [FAILED]'
>Starting kdump: [FAILED]
>+ return 1
>+ exit 1

Actions: View

Attachments on bug 1028397: 901631 | 901633 | 901676 | 901783