Attachment 907853 Details for Bug 1108362 – output showing using the gateway i want for the provisioned nodes, and the foreman host then losing all network connectivity

output showing using the gateway i want for the provisioned nodes, and the foreman host then losing all network connectivity

gateway2.txt (text/plain), 8.82 KB, created by James Slagle on 2014-06-11 19:53:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: James Slagle

Created: 2014-06-11 19:53:45 UTC

Size: 8.82 KB

patch

obsolete

>[root@staypuft ~]# 
>[root@staypuft ~]# ip a
>1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
>    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>    inet 127.0.0.1/8 scope host lo
>    inet6 ::1/128 scope host 
>       valid_lft forever preferred_lft forever
>2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
>    link/ether 52:54:00:62:78:64 brd ff:ff:ff:ff:ff:ff
>    inet 192.168.122.39/24 brd 192.168.122.255 scope global eth0
>    inet6 fe80::5054:ff:fe62:7864/64 scope link 
>       valid_lft forever preferred_lft forever
>3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
>    link/ether 52:54:00:59:de:6b brd ff:ff:ff:ff:ff:ff
>[root@staypuft ~]# 
>[root@staypuft ~]# 
>[root@staypuft ~]# ip addr add 192.0.2.1/24 dev eth1
>[root@staypuft ~]# 
>[root@staypuft ~]# ip a
>1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
>    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>    inet 127.0.0.1/8 scope host lo
>    inet6 ::1/128 scope host 
>       valid_lft forever preferred_lft forever
>2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
>    link/ether 52:54:00:62:78:64 brd ff:ff:ff:ff:ff:ff
>    inet 192.168.122.39/24 brd 192.168.122.255 scope global eth0
>    inet6 fe80::5054:ff:fe62:7864/64 scope link 
>       valid_lft forever preferred_lft forever
>3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
>    link/ether 52:54:00:59:de:6b brd ff:ff:ff:ff:ff:ff
>    inet 192.0.2.1/24 scope global eth1
>[root@staypuft ~]# 
>[root@staypuft ~]# 
>[root@staypuft ~]# staypuft-installer 
>Provisioning setup
>
>Please select NIC on which you want Foreman provisioning enabled:
>1. eth1
>2. eth0
>?  1
>
>Current networking setup:
>       Network interface: 'eth1'
>              IP address: '192.0.2.1'
>            Network mask: '255.255.255.0'
>         Network address: '192.0.2.0'
>        DHCP range start: '192.0.2.2'
>          DHCP range end: '192.0.2.254'
>                 Gateway: '192.168.122.1'
>           DNS forwarder: '192.168.122.1'
>                  Domain: 'localdomain'
>             Foreman URL: 'https://staypuft.localdomain'
>Set this host networking: â
>
>Is the networking correct?:
>1. Yes, move on!
>2. No, change Network interface
>3. No, change IP address
>4. No, change Network mask
>5. No, change Network address
>6. No, change DHCP range start
>7. No, change DHCP range end
>8. No, change Gateway
>9. No, change DNS forwarder
>10. No, change Domain
>11. No, change Foreman URL
>12. No, change Set this host networking
>13. No, cancel installation
>8
>new value for Gateway
>192.0.2.1
>
>Current networking setup:
>       Network interface: 'eth1'
>              IP address: '192.0.2.1'
>            Network mask: '255.255.255.0'
>         Network address: '192.0.2.0'
>        DHCP range start: '192.0.2.2'
>          DHCP range end: '192.0.2.254'
>                 Gateway: '192.0.2.1'
>           DNS forwarder: '192.168.122.1'
>                  Domain: 'localdomain'
>             Foreman URL: 'https://staypuft.localdomain'
>Set this host networking: â
>
>Is the networking correct?:
>1. Yes, move on!
>2. No, change Network interface
>3. No, change IP address
>4. No, change Network mask
>5. No, change Network address
>6. No, change DHCP range start
>7. No, change DHCP range end
>8. No, change Gateway
>9. No, change DNS forwarder
>10. No, change Domain
>11. No, change Foreman URL
>12. No, change Set this host networking
>13. No, cancel installation
>1
> Execution of '/usr/bin/yum -d 0 -e 0 -y install ruby193-rubygem-passenger-native' returned 1: 
> /Stage[main]/Foreman::Install/Package[ruby193-rubygem-passenger-native]/ensure: change from absent to present failed: Execution of '/usr/bin/yum -d 0 -e 0 -y install ruby193-rubygem-passenger-native' returned 1: 
> /Stage[main]/Foreman::Database/Foreman::Rake[db:migrate]/Exec[foreman-rake-db:migrate]: Failed to call refresh: /usr/sbin/foreman-rake db:migrate returned 1 instead of one of [0]
> /Stage[main]/Foreman::Database/Foreman::Rake[db:migrate]/Exec[foreman-rake-db:migrate]: /usr/sbin/foreman-rake db:migrate returned 1 instead of one of [0]
>Installing             Done                                               [100%] [........................................]
>Starting configuration...
>Error: Failed to apply catalog: Connection refused - connect(2)
>Error: Could not send report: Connection refused - connect(2)
>rake aborted!
>Please install the sqlite3 adapter: `gem install activerecord-sqlite3-adapter` (Could not find sqlite3 (~> 1.3.5) amongst [actionmailer-3.2.8, actionpack-3.2.8, activemodel-3.2.8, activerecord-3.2.8, activeresource-3.2.8, activesupport-3.2.8, algebrick-0.4.0, ancestry-2.0.0, apipie-params-0.0.3, apipie-rails-0.1.2, arel-3.0.2, audited-3.0.0, audited-activerecord-3.0.0, bigdecimal-1.1.0, bootstrap-sass-3.0.3.0, builder-3.0.0, bundler-1.1.4, bundler_ext-0.3.0, daemons-1.1.4, deep_cloneable-1.6.0, deface-0.7.2, diff-lcs-1.1.3, dynflow-0.6.1, erubis-2.7.0, eventmachine-0.12.10, fast_gettext-0.8.0, foreigner-1.4.2, foreman-tasks-0.5.7, foreman_discovery-1.3.0.rc2, foreman_openstack_simplify-0.0.6, ftools-0.0.0, gettext_i18n_rails-0.10.0, gettext_i18n_rails_js-0.0.8, hike-1.2.1, i18n-0.6.0, i18n_data-0.2.7, io-console-0.3, journey-1.0.4, jquery-rails-2.0.2, jquery-ui-rails-4.0.2, json-1.5.5, mail-2.4.4, mime-types-1.19, multi_json-1.3.6, mysql2-0.3.11, net-http-persistent-2.7, net-ldap-0.3.1, nokogiri-1.5.11, oauth-0.4.7, open4-1.3.0, pg-0.12.2, po_to_json-0.0.7, polyglot-0.3.3, rabl-0.9.0, rack-1.4.1, rack-cache-1.2, rack-protection-1.2.0, rack-ssl-1.3.2, rack-test-0.6.1, rails-3.2.8, railties-3.2.8, rake-0.9.2.2, rdoc-3.9.5, ref-1.0.0, rest-client-1.6.1, ruby2ruby-2.0.1, ruby_parser-3.1.1, safemode-1.2.0, sass-3.2.13, scoped_search-2.7.1, sequel-3.45.0, sexp_processor-4.1.3, sinatra-1.3.2, sprockets-2.10.1, staypuft-0.1.1, therubyracer-0.11.0beta5, thin-1.3.1, thor-0.15.4, tilt-1.3.3, treetop-1.4.10, tzinfo-0.3.33, uuidtools-2.1.3, wicked-1.0.2, will_paginate-3.0.2])
>
>Tasks: TOP => puppet:import:puppet_classes => environment
>(See full trace by running task with --trace)
>/usr/share/foreman-installer/hooks/lib/base_seeder.rb:28:in `find_default_os': undefined method `[]' for nil:NilClass (NoMethodError)
>	from /usr/share/foreman-installer/hooks/lib/subscription_seeder.rb:17:in `initialize'
>	from /usr/share/foreman-installer/hooks/post/10-setup_provisioning.rb:24:in `new'
>	from /usr/share/foreman-installer/hooks/post/10-setup_provisioning.rb:24:in `load'
>	from /usr/lib/ruby/gems/1.8/gems/kafo-0.6.0/lib/kafo/hook_context.rb:13:in `instance_exec'
>	from /usr/lib/ruby/gems/1.8/gems/kafo-0.6.0/lib/kafo/hook_context.rb:13:in `execute'
>	from /usr/lib/ruby/gems/1.8/gems/kafo-0.6.0/lib/kafo/hooking.rb:48:in `execute'
>	from /usr/lib/ruby/gems/1.8/gems/kafo-0.6.0/lib/kafo/hooking.rb:47:in `each_pair'
>	from /usr/lib/ruby/gems/1.8/gems/kafo-0.6.0/lib/kafo/hooking.rb:47:in `execute'
>	from /usr/lib/ruby/gems/1.8/gems/kafo-0.6.0/lib/kafo/kafo_configure.rb:339:in `run_installation'
>	from /usr/lib/ruby/gems/1.8/gems/kafo-0.6.0/lib/kafo/exit_handler.rb:24:in `call'
>	from /usr/lib/ruby/gems/1.8/gems/kafo-0.6.0/lib/kafo/exit_handler.rb:24:in `exit'
>	from /usr/lib/ruby/gems/1.8/gems/kafo-0.6.0/lib/kafo/kafo_configure.rb:122:in `exit'
>	from /usr/lib/ruby/gems/1.8/gems/kafo-0.6.0/lib/kafo/kafo_configure.rb:338:in `run_installation'
>	from /usr/lib/ruby/gems/1.8/gems/kafo-0.6.0/lib/kafo/kafo_configure.rb:109:in `execute'
>	from /usr/lib/ruby/gems/1.8/gems/clamp-0.6.2/lib/clamp/command.rb:67:in `run'
>	from /usr/lib/ruby/gems/1.8/gems/clamp-0.6.2/lib/clamp/command.rb:125:in `run'
>	from /usr/lib/ruby/gems/1.8/gems/kafo-0.6.0/lib/kafo/kafo_configure.rb:116:in `run'
>	from /usr/sbin/staypuft-installer:54
>[root@staypuft ~]# 
>[root@staypuft ~]# route -n
>Kernel IP routing table
>Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
>192.0.2.0       0.0.0.0         255.255.255.0   U     0      0        0 eth1
>192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 eth0
>169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0 eth0
>169.254.0.0     0.0.0.0         255.255.0.0     U     1003   0        0 eth1
>0.0.0.0         192.0.2.1       0.0.0.0         UG    0      0        0 eth1
>
>[root@staypuft ~]# cat /etc/dhcp/dhcpd.conf 
># dhcpd.conf
>omapi-port 7911;
>
>default-lease-time 600;
>max-lease-time 7200;
>
>
>ddns-update-style none;
>
>option domain-name "localdomain";
>option domain-name-servers 192.0.2.1;
>
>allow booting;
>allow bootp;
>
>option fqdn.no-client-update    on;  # set the "O" and "S" flag bits
>option fqdn.rcode2            255;
>option pxegrub code 150 = text ;
>
># PXE Handoff.
>next-server 192.0.2.1;
>filename "pxelinux.0";
>
>log-facility local7;
>
>include "/etc/dhcp/dhcpd.hosts";
>#################################
># localdomain
>#################################
>subnet 192.0.2.0 netmask 255.255.255.0 {
>  pool
>  {
>    range 192.0.2.2 192.0.2.254;
>  }
>
>  option subnet-mask 255.255.255.0;
>  option routers 192.0.2.1;
>}
>
>

Actions: View

Attachments on bug 1108362: 907852 | 907853