Attachment 915360 Details for Bug 731929 – Comment

Comment

comment_3966155.txt (text/plain), 94.80 KB, created by Renich Bon Ciric on 2011-08-19 06:17:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Renich Bon Ciric

Created: 2011-08-19 06:17:09 UTC

Size: 94.80 KB

patch

obsolete

>Description of problem:
>If I connect any USB 2.0 device, it fails to mount
>
>Version-Release number of selected component (if applicable):
>2.6.40-4
>
>How reproducible:
>Insert a USB key on a ASUS CrossHair V Formula Motherboard (AMD 990FX/SB950 chipset)
>
>Steps to Reproduce:
>1. Get a functional USB stick (storage device)
>2. Insert it
>3. Wait until your hair falls...
>  
>Actual results:
>Fails to mount
>
>Expected results:
>Mounts and you live a happy life
>
>Additional info:
>Here is some output:
>
># /var/log/messages (while inserting)
>...
>Aug 19 01:10:03 introdesk ntpd[934]: peers refreshed
>Aug 19 01:10:05 introdesk ntpd_intres[954]: DNS 0.fedora.pool.ntp.org -> 38.117.195.101
>Aug 19 01:10:05 introdesk ntpd_intres[954]: DNS 1.fedora.pool.ntp.org -> 169.229.70.183
>Aug 19 01:10:05 introdesk ntpd_intres[954]: DNS 2.fedora.pool.ntp.org -> 72.18.205.157
>Aug 19 01:10:05 introdesk ntpd_intres[954]: DNS 3.fedora.pool.ntp.org -> 72.18.205.156
>Aug 19 01:10:12 introdesk ntpd[934]: 0.0.0.0 c61c 0c clock_step -0.327788 s
>Aug 19 01:10:11 introdesk ntpd[934]: 0.0.0.0 c614 04 freq_mode
>Aug 19 01:10:12 introdesk systemd[1]: Reloading.
>Aug 19 01:10:12 introdesk systemd[1]: mysqld.service: Supervising process 1588 which is not our child. We'll most likely not notice when it exits.
>Aug 19 01:10:12 introdesk ntpd[934]: 0.0.0.0 c618 08 no_sys_peer
>Aug 19 01:10:24 introdesk kernel: [  283.218157] usb 3-4: new high speed USB device number 2 using ehci_hcd
>Aug 19 01:10:24 introdesk kernel: [  283.320141] usb 3-4: device descriptor read/64, error -32
>Aug 19 01:10:24 introdesk kernel: [  283.523126] usb 3-4: device descriptor read/64, error -32
>Aug 19 01:10:24 introdesk kernel: [  283.726145] usb 3-4: new high speed USB device number 3 using ehci_hcd
>Aug 19 01:10:25 introdesk kernel: [  283.828139] usb 3-4: device descriptor read/64, error -32
>Aug 19 01:10:25 introdesk kernel: [  284.031136] usb 3-4: device descriptor read/64, error -32
>Aug 19 01:10:25 introdesk kernel: [  284.234147] usb 3-4: new high speed USB device number 4 using ehci_hcd
>Aug 19 01:10:25 introdesk kernel: [  284.636151] usb 3-4: device not accepting address 4, error -32
>Aug 19 01:10:25 introdesk kernel: [  284.738141] usb 3-4: new high speed USB device number 5 using ehci_hcd
>Aug 19 01:10:26 introdesk kernel: [  285.140158] usb 3-4: device not accepting address 5, error -32
>Aug 19 01:10:26 introdesk kernel: [  285.140188] hub 3-0:1.0: unable to enumerate USB device on port 4
>Aug 19 01:10:26 introdesk kernel: [  285.433159] usb 7-4: new full speed USB device number 2 using ohci_hcd
>Aug 19 01:10:26 introdesk kernel: [  285.561166] usb 7-4: device descriptor read/64, error -32
>Aug 19 01:10:27 introdesk kernel: [  285.790116] usb 7-4: device descriptor read/64, error -32
>Aug 19 01:10:27 introdesk kernel: [  286.014165] usb 7-4: new full speed USB device number 3 using ohci_hcd
>Aug 19 01:10:27 introdesk kernel: [  286.142149] usb 7-4: device descriptor read/64, error -32
>Aug 19 01:10:27 introdesk kernel: [  286.371154] usb 7-4: device descriptor read/64, error -32
>Aug 19 01:10:27 introdesk kernel: [  286.595152] usb 7-4: new full speed USB device number 4 using ohci_hcd
>Aug 19 01:10:28 introdesk kernel: [  286.998162] usb 7-4: device not accepting address 4, error -32
>Aug 19 01:10:28 introdesk kernel: [  287.121151] usb 7-4: new full speed USB device number 5 using ohci_hcd
>Aug 19 01:10:28 introdesk kernel: [  287.525175] usb 7-4: device not accepting address 5, error -32
>Aug 19 01:10:28 introdesk kernel: [  287.525228] hub 7-0:1.0: unable to enumerate USB device on port 4
>Aug 19 01:10:50 introdesk kernel: [  309.007548] exe (3730): /proc/3730/oom_adj is deprecated, please use /proc/3730/oom_score_adj instead.
>...
>
># dmesg ... here goes!
>
>[root@introdesk ~]# dmesg 
>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 2.6.40-4.fc15.x86_64 (mockbuild@x86-13.phx2.fedoraproject.org) (gcc version 4.6.0 20110530 (Red Hat 4.6.0-9) (GCC) ) #1 SMP Fri Jul 29 18:46:53 UTC 2011
>[    0.000000] Command line: ro root=/dev/mapper/vg_introdesk-lv_root rd_LVM_LV=vg_introdesk/lv_root rd_LVM_LV=vg_introdesk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=es rhgb quiet
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
>[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cd723000 (usable)
>[    0.000000]  BIOS-e820: 00000000cd723000 - 00000000cd774000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000cd774000 - 00000000cd77c000 (ACPI data)
>[    0.000000]  BIOS-e820: 00000000cd77c000 - 00000000cdada000 (reserved)
>[    0.000000]  BIOS-e820: 00000000cdada000 - 00000000cdaeb000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000cdaeb000 - 00000000cdafe000 (reserved)
>[    0.000000]  BIOS-e820: 00000000cdafe000 - 00000000cdb00000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000cdb00000 - 00000000cdb09000 (reserved)
>[    0.000000]  BIOS-e820: 00000000cdb09000 - 00000000cdb0f000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000cdb0f000 - 00000000cdb6e000 (reserved)
>[    0.000000]  BIOS-e820: 00000000cdb6e000 - 00000000cdd71000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000cdd71000 - 00000000cdf00000 (usable)
>[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
>[    0.000000]  BIOS-e820: 0000000100001000 - 0000000430000000 (usable)
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI 2.7 present.
>[    0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./Crosshair V Formula, BIOS 0506 06/22/2011
>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>[    0.000000] No AGP bridge found
>[    0.000000] last_pfn = 0x430000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF write-through
>[    0.000000]   C0000-CCFFF write-protect
>[    0.000000]   CD000-EBFFF uncachable
>[    0.000000]   EC000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000000 mask FFFF00000000 write-back
>[    0.000000]   1 base 0000CDF00000 mask FFFFFFF00000 uncachable
>[    0.000000]   2 base 0000CE000000 mask FFFFFE000000 uncachable
>[    0.000000]   3 base 0000D0000000 mask FFFFF0000000 uncachable
>[    0.000000]   4 base 0000E0000000 mask FFFFE0000000 uncachable
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] TOM2: 0000000430000000 aka 17152M
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] original variable MTRRs
>[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
>[    0.000000] reg 1, base: 3295MB, range: 1MB, type UC
>[    0.000000] reg 2, base: 3296MB, range: 32MB, type UC
>[    0.000000] reg 3, base: 3328MB, range: 256MB, type UC
>[    0.000000] reg 4, base: 3584MB, range: 512MB, type UC
>[    0.000000] total RAM covered: 3295M
>[    0.000000] Found optimal setting for mtrr clean up
>[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 0G
>[    0.000000] New variable MTRRs
>[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
>[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
>[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
>[    0.000000] reg 3, base: 3295MB, range: 1MB, type UC
>[    0.000000] reg 4, base: 3296MB, range: 32MB, type UC
>[    0.000000] e820 update range: 00000000cdf00000 - 0000000100000000 (usable) ==> (reserved)
>[    0.000000] last_pfn = 0xcdf00 max_arch_pfn = 0x400000000
>[    0.000000] initial memory mapped : 0 - 20000000
>[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: 0000000000000000-00000000cdf00000
>[    0.000000]  0000000000 - 00c0000000 page 1G
>[    0.000000]  00c0000000 - 00cde00000 page 2M
>[    0.000000]  00cde00000 - 00cdf00000 page 4k
>[    0.000000] kernel direct mapping tables up to cdf00000 @ cdefd000-cdf00000
>[    0.000000] init_memory_mapping: 0000000100000000-0000000430000000
>[    0.000000]  0100000000 - 0400000000 page 1G
>[    0.000000]  0400000000 - 0430000000 page 2M
>[    0.000000] kernel direct mapping tables up to 430000000 @ 42fffe000-430000000
>[    0.000000] RAMDISK: 37156000 - 37ff0000
>[    0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
>[    0.000000] ACPI: XSDT 00000000cd774068 0004C (v01 ALASKA    A M I 01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 00000000cd77ad28 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
>[    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-560)
>[    0.000000] ACPI: DSDT 00000000cd774140 06BE5 (v02 ALASKA    A M I 00000000 INTL 20051117)
>[    0.000000] ACPI: FACS 00000000cdb09f80 00040
>[    0.000000] ACPI: APIC 00000000cd77ae20 0009E (v03 ALASKA    A M I 01072009 AMI  00010013)
>[    0.000000] ACPI: MCFG 00000000cd77aec0 0003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
>[    0.000000] ACPI: HPET 00000000cd77af00 00038 (v01 ALASKA    A M I 01072009 AMI  00000004)
>[    0.000000] ACPI: SSDT 00000000cd77af38 00DDA (v01 AMD    POWERNOW 00000001 AMD  00000001)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] Scanning NUMA topology in Northbridge 24
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at 0000000000000000-0000000430000000
>[    0.000000] Initmem setup node 0 0000000000000000-0000000430000000
>[    0.000000]   NODE_DATA [000000042ffea000 - 000000042fffdfff]
>[    0.000000]  [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff88041f600000-ffff88042d7fffff] on node 0
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000010 -> 0x00001000
>[    0.000000]   DMA32    0x00001000 -> 0x00100000
>[    0.000000]   Normal   0x00100000 -> 0x00430000
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[4] active PFN ranges
>[    0.000000]     0: 0x00000010 -> 0x0000009d
>[    0.000000]     0: 0x00000100 -> 0x000cd723
>[    0.000000]     0: 0x000cdd71 -> 0x000cdf00
>[    0.000000]     0: 0x00100001 -> 0x00430000
>[    0.000000] On node 0 totalpages: 4184126
>[    0.000000]   DMA zone: 56 pages used for memmap
>[    0.000000]   DMA zone: 5 pages reserved
>[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 14280 pages used for memmap
>[    0.000000]   DMA32 zone: 823530 pages, LIFO batch:31
>[    0.000000]   Normal zone: 45696 pages used for memmap
>[    0.000000]   Normal zone: 3296639 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 7, version 33, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec20000] gsi_base[24])
>[    0.000000] IOAPIC[1]: apic_id 8, version 33, address 0xfec20000, GSI 24-55
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
>[    0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 72
>[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
>[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>[    0.000000] PM: Registered nosave memory: 00000000cd723000 - 00000000cd774000
>[    0.000000] PM: Registered nosave memory: 00000000cd774000 - 00000000cd77c000
>[    0.000000] PM: Registered nosave memory: 00000000cd77c000 - 00000000cdada000
>[    0.000000] PM: Registered nosave memory: 00000000cdada000 - 00000000cdaeb000
>[    0.000000] PM: Registered nosave memory: 00000000cdaeb000 - 00000000cdafe000
>[    0.000000] PM: Registered nosave memory: 00000000cdafe000 - 00000000cdb00000
>[    0.000000] PM: Registered nosave memory: 00000000cdb00000 - 00000000cdb09000
>[    0.000000] PM: Registered nosave memory: 00000000cdb09000 - 00000000cdb0f000
>[    0.000000] PM: Registered nosave memory: 00000000cdb0f000 - 00000000cdb6e000
>[    0.000000] PM: Registered nosave memory: 00000000cdb6e000 - 00000000cdd71000
>[    0.000000] PM: Registered nosave memory: 00000000cdf00000 - 00000000f8000000
>[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
>[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
>[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
>[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
>[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
>[    0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
>[    0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
>[    0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
>[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
>[    0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
>[    0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
>[    0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
>[    0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
>[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
>[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
>[    0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
>[    0.000000] Allocating PCI resources starting at cdf00000 (gap: cdf00000:2a100000)
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88042fc00000 s78720 r8192 d23680 u262144
>[    0.000000] pcpu-alloc: s78720 r8192 d23680 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4124089
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: ro root=/dev/mapper/vg_introdesk-lv_root rd_LVM_LV=vg_introdesk/lv_root rd_LVM_LV=vg_introdesk/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=es rhgb quiet
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Node 0: aperture @ f8000000 size 64 MB
>[    0.000000] Memory: 16408860k/17563648k available (4868k kernel code, 827144k absent, 327644k reserved, 6735k data, 944k init)
>[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
>[    0.000000] NR_IRQS:16640 nr_irqs:1288 16
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] allocated 134217728 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] hpet clockevent registered
>[    0.000000] Fast TSC calibration using PIT
>[    0.000000] Detected 3311.180 MHz processor.
>[    0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6622.36 BogoMIPS (lpj=3311180)
>[    0.001008] pid_max: default: 32768 minimum: 301
>[    0.001028] Security Framework initialized
>[    0.001034] SELinux:  Initializing.
>[    0.001040] SELinux:  Starting in permissive mode
>[    0.002571] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.006900] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.008740] Mount-cache hash table entries: 256
>[    0.008851] Initializing cgroup subsys cpuacct
>[    0.008855] Initializing cgroup subsys memory
>[    0.008866] Initializing cgroup subsys devices
>[    0.008868] Initializing cgroup subsys freezer
>[    0.008870] Initializing cgroup subsys net_cls
>[    0.008871] Initializing cgroup subsys blkio
>[    0.008877] Initializing cgroup subsys perf_event
>[    0.008899] tseg: 00cdf00000
>[    0.008901] CPU: Physical Processor ID: 0
>[    0.008902] CPU: Processor Core ID: 0
>[    0.008904] mce: CPU supports 6 MCE banks
>[    0.008911] using AMD E400 aware idle routine
>[    0.009157] ACPI: Core revision 20110413
>[    0.011015] ftrace: allocating 25296 entries in 100 pages
>[    0.012371] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.022834] CPU0: AMD Phenom(tm) II X6 1100T Processor stepping 00
>[    0.022998] Performance Events: AMD PMU driver.
>[    0.022998] ... version:                0
>[    0.022998] ... bit width:              48
>[    0.022998] ... generic registers:      4
>[    0.022998] ... value mask:             0000ffffffffffff
>[    0.022998] ... max period:             00007fffffffffff
>[    0.022998] ... fixed-purpose events:   0
>[    0.022998] ... event mask:             000000000000000f
>[    0.022998] NMI watchdog enabled, takes one hw-pmu counter.
>[    0.022998] Booting Node   0, Processors  #1
>[    0.022998] smpboot cpu 1: start_ip = 98000
>[    0.094006] NMI watchdog enabled, takes one hw-pmu counter.
>[    0.094025] System has AMD C1E enabled
>[    0.094025] Switch to broadcast mode on CPU1
>[    0.094071]  #2
>[    0.094072] smpboot cpu 2: start_ip = 98000
>[    0.166006] NMI watchdog enabled, takes one hw-pmu counter.
>[    0.166021] Switch to broadcast mode on CPU2
>[    0.166061]  #3
>[    0.166062] smpboot cpu 3: start_ip = 98000
>[    0.238015] NMI watchdog enabled, takes one hw-pmu counter.
>[    0.238030] Switch to broadcast mode on CPU3
>[    0.238072]  #4
>[    0.238074] smpboot cpu 4: start_ip = 98000
>[    0.310010] NMI watchdog enabled, takes one hw-pmu counter.
>[    0.310025] Switch to broadcast mode on CPU4
>[    0.310072]  #5
>[    0.310073] smpboot cpu 5: start_ip = 98000
>[    0.382001] NMI watchdog enabled, takes one hw-pmu counter.
>[    0.382019] Brought up 6 CPUs
>[    0.382021] Total of 6 processors activated (39735.20 BogoMIPS).
>[    0.382018] Switch to broadcast mode on CPU5
>[    0.383062] Switch to broadcast mode on CPU0
>[    0.383062] devtmpfs: initialized
>[    0.386813] PM: Registering ACPI NVS region at cd723000 (331776 bytes)
>[    0.386813] PM: Registering ACPI NVS region at cdada000 (69632 bytes)
>[    0.386813] PM: Registering ACPI NVS region at cdafe000 (8192 bytes)
>[    0.386813] PM: Registering ACPI NVS region at cdb09000 (24576 bytes)
>[    0.386813] PM: Registering ACPI NVS region at cdb6e000 (2109440 bytes)
>[    0.387428] atomic64 test passed for x86-64 platform with CX8 and with SSE
>[    0.387450] Time:  1:05:41  Date: 08/19/11
>[    0.387477] NET: Registered protocol family 16
>[    0.387546] node 0 link 0: io port [c000, ffff]
>[    0.387548] TOM: 00000000d0000000 aka 3328M
>[    0.387550] Fam 10h mmconf [e0000000, efffffff]
>[    0.387551] node 0 link 0: mmio [d0000000, fef0ffff] ==> [d0000000, dfffffff] and [f0000000, fef0ffff]
>[    0.387555] TOM2: 0000000430000000 aka 17152M
>[    0.387557] bus: [00, 1f] on node 0 link 0
>[    0.387559] bus: 00 index 0 [io  0x0000-0xffff]
>[    0.387560] bus: 00 index 1 [mem 0xd0000000-0xdfffffff]
>[    0.387562] bus: 00 index 2 [mem 0xf0000000-0xffffffff]
>[    0.387563] bus: 00 index 3 [mem 0x430000000-0xfcffffffff]
>[    0.387571] Extended Config Space enabled on 1 nodes
>[    0.387677] ACPI: bus type pci registered
>[    0.387721] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.387723] PCI: not using MMCONFIG
>[    0.387725] PCI: Using configuration type 1 for base access
>[    0.387726] PCI: Using configuration type 1 for extended access
>[    0.388624] bio: create slab <bio-0> at 0
>[    0.389271] ACPI: EC: Look up EC in DSDT
>[    0.389831] ACPI: Executed 3 blocks of module-level executable AML code
>[    0.391810] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
>[    0.391814] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110413/nsinit-349)
>[    0.395116] ACPI: Interpreter enabled
>[    0.395120] ACPI: (supports S0 S1 S3 S4 S5)
>[    0.395135] ACPI: Using IOAPIC for interrupt routing
>[    0.395248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.395276] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.421478] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.421557] ACPI: No dock devices found.
>[    0.421558] HEST: Table not found.
>[    0.421560] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.421672] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.421823] pci_root PNP0A03:00: host bridge window [io  0x0000-0x03af]
>[    0.421825] pci_root PNP0A03:00: host bridge window [io  0x03e0-0x0cf7]
>[    0.421826] pci_root PNP0A03:00: host bridge window [io  0x03b0-0x03df]
>[    0.421828] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>[    0.421829] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>[    0.421831] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
>[    0.421833] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xffffffff]
>[    0.421845] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600
>[    0.421887] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
>[    0.421908] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>[    0.421910] pci 0000:00:02.0: PME# disabled
>[    0.421921] pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
>[    0.421969] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>[    0.421971] pci 0000:00:04.0: PME# disabled
>[    0.421983] pci 0000:00:05.0: [1002:5a19] type 1 class 0x000604
>[    0.422003] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>[    0.422005] pci 0000:00:05.0: PME# disabled
>[    0.422015] pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604
>[    0.422035] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>[    0.422037] pci 0000:00:06.0: PME# disabled
>[    0.422047] pci 0000:00:07.0: [1002:5a1b] type 1 class 0x000604
>[    0.422067] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
>[    0.422069] pci 0000:00:07.0: PME# disabled
>[    0.422080] pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604
>[    0.422099] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
>[    0.422101] pci 0000:00:09.0: PME# disabled
>[    0.422123] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
>[    0.422139] pci 0000:00:11.0: reg 10: [io  0xf040-0xf047]
>[    0.422147] pci 0000:00:11.0: reg 14: [io  0xf030-0xf033]
>[    0.422155] pci 0000:00:11.0: reg 18: [io  0xf020-0xf027]
>[    0.422163] pci 0000:00:11.0: reg 1c: [io  0xf010-0xf013]
>[    0.422171] pci 0000:00:11.0: reg 20: [io  0xf000-0xf00f]
>[    0.422179] pci 0000:00:11.0: reg 24: [mem 0xf770b000-0xf770b3ff]
>[    0.422218] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
>[    0.422229] pci 0000:00:12.0: reg 10: [mem 0xf770a000-0xf770afff]
>[    0.422285] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
>[    0.422301] pci 0000:00:12.2: reg 10: [mem 0xf7709000-0xf77090ff]
>[    0.422357] pci 0000:00:12.2: supports D1 D2
>[    0.422359] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>[    0.422362] pci 0000:00:12.2: PME# disabled
>[    0.422379] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
>[    0.422390] pci 0000:00:13.0: reg 10: [mem 0xf7708000-0xf7708fff]
>[    0.422447] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
>[    0.422462] pci 0000:00:13.2: reg 10: [mem 0xf7707000-0xf77070ff]
>[    0.422518] pci 0000:00:13.2: supports D1 D2
>[    0.422520] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>[    0.422523] pci 0000:00:13.2: PME# disabled
>[    0.422540] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
>[    0.422606] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
>[    0.422623] pci 0000:00:14.2: reg 10: [mem 0xf7700000-0xf7703fff 64bit]
>[    0.422669] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>[    0.422672] pci 0000:00:14.2: PME# disabled
>[    0.422682] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
>[    0.422741] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
>[    0.422774] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
>[    0.422785] pci 0000:00:14.5: reg 10: [mem 0xf7706000-0xf7706fff]
>[    0.422838] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
>[    0.422848] pci 0000:00:16.0: reg 10: [mem 0xf7705000-0xf7705fff]
>[    0.422904] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
>[    0.422919] pci 0000:00:16.2: reg 10: [mem 0xf7704000-0xf77040ff]
>[    0.422995] pci 0000:00:16.2: supports D1 D2
>[    0.422996] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
>[    0.422999] pci 0000:00:16.2: PME# disabled
>[    0.423015] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
>[    0.423027] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
>[    0.423037] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
>[    0.423047] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
>[    0.423059] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
>[    0.423101] pci 0000:01:00.0: [10de:042c] type 0 class 0x000300
>[    0.423110] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
>[    0.423119] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.423127] pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit]
>[    0.423134] pci 0000:01:00.0: reg 24: [io  0xe000-0xe07f]
>[    0.423140] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf701ffff pref]
>[    0.424962] pci 0000:00:02.0: PCI bridge to [bus 01-01]
>[    0.424966] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>[    0.424969] pci 0000:00:02.0:   bridge window [mem 0xf4000000-0xf70fffff]
>[    0.424972] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.425002] pci 0000:02:00.0: [1b21:0612] type 0 class 0x000106
>[    0.425013] pci 0000:02:00.0: reg 10: [io  0xd050-0xd057]
>[    0.425020] pci 0000:02:00.0: reg 14: [io  0xd040-0xd043]
>[    0.425027] pci 0000:02:00.0: reg 18: [io  0xd030-0xd037]
>[    0.425034] pci 0000:02:00.0: reg 1c: [io  0xd020-0xd023]
>[    0.425041] pci 0000:02:00.0: reg 20: [io  0xd000-0xd01f]
>[    0.425048] pci 0000:02:00.0: reg 24: [mem 0xf7600000-0xf76001ff]
>[    0.426962] pci 0000:00:04.0: PCI bridge to [bus 02-02]
>[    0.426967] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
>[    0.426969] pci 0000:00:04.0:   bridge window [mem 0xf7600000-0xf76fffff]
>[    0.426972] pci 0000:00:04.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>[    0.427013] pci 0000:03:00.0: [8086:150c] type 0 class 0x000200
>[    0.427033] pci 0000:03:00.0: reg 10: [mem 0xf7500000-0xf751ffff]
>[    0.427058] pci 0000:03:00.0: reg 18: [io  0xc000-0xc01f]
>[    0.427071] pci 0000:03:00.0: reg 1c: [mem 0xf7520000-0xf7523fff]
>[    0.427150] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>[    0.427155] pci 0000:03:00.0: PME# disabled
>[    0.428966] pci 0000:00:05.0: PCI bridge to [bus 03-03]
>[    0.428970] pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
>[    0.428972] pci 0000:00:05.0:   bridge window [mem 0xf7500000-0xf75fffff]
>[    0.428975] pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>[    0.429011] pci 0000:04:00.0: [1b21:1042] type 0 class 0x000c03
>[    0.429028] pci 0000:04:00.0: reg 10: [mem 0xf7400000-0xf7407fff 64bit]
>[    0.429098] pci 0000:04:00.0: PME# supported from D3hot D3cold
>[    0.429102] pci 0000:04:00.0: PME# disabled
>[    0.430962] pci 0000:00:06.0: PCI bridge to [bus 04-04]
>[    0.430966] pci 0000:00:06.0:   bridge window [io  0xfff000-0x0000] (disabled)
>[    0.430969] pci 0000:00:06.0:   bridge window [mem 0xf7400000-0xf74fffff]
>[    0.430972] pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>[    0.431007] pci 0000:05:00.0: [1b21:1042] type 0 class 0x000c03
>[    0.431024] pci 0000:05:00.0: reg 10: [mem 0xf7300000-0xf7307fff 64bit]
>[    0.431093] pci 0000:05:00.0: PME# supported from D3hot D3cold
>[    0.431097] pci 0000:05:00.0: PME# disabled
>[    0.432963] pci 0000:00:07.0: PCI bridge to [bus 05-05]
>[    0.432967] pci 0000:00:07.0:   bridge window [io  0xfff000-0x0000] (disabled)
>[    0.432969] pci 0000:00:07.0:   bridge window [mem 0xf7300000-0xf73fffff]
>[    0.432972] pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>[    0.433007] pci 0000:06:00.0: [1b21:1042] type 0 class 0x000c03
>[    0.433024] pci 0000:06:00.0: reg 10: [mem 0xf7200000-0xf7207fff 64bit]
>[    0.433093] pci 0000:06:00.0: PME# supported from D3hot D3cold
>[    0.433097] pci 0000:06:00.0: PME# disabled
>[    0.434962] pci 0000:00:09.0: PCI bridge to [bus 06-06]
>[    0.434966] pci 0000:00:09.0:   bridge window [io  0xfff000-0x0000] (disabled)
>[    0.434969] pci 0000:00:09.0:   bridge window [mem 0xf7200000-0xf72fffff]
>[    0.434971] pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>[    0.435002] pci 0000:07:05.0: [168c:0029] type 0 class 0x000280
>[    0.435021] pci 0000:07:05.0: reg 10: [mem 0xf7100000-0xf710ffff]
>[    0.435099] pci 0000:07:05.0: PME# supported from D0 D3hot
>[    0.435103] pci 0000:07:05.0: PME# disabled
>[    0.435144] pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode)
>[    0.435148] pci 0000:00:14.4:   bridge window [io  0xf000-0x0000] (disabled)
>[    0.435151] pci 0000:00:14.4:   bridge window [mem 0xf7100000-0xf71fffff]
>[    0.435155] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>[    0.435157] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
>[    0.435159] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
>[    0.435160] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
>[    0.435162] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.435164] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.435166] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>[    0.435168] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
>[    0.435184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.435277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
>[    0.435317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
>[    0.435336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
>[    0.435354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
>[    0.435372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT]
>[    0.435391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT]
>[    0.435409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT]
>[    0.435432]  pci0000:00: Requesting ACPI _OSC control (0x1d)
>[    0.435434]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
>[    0.435436] ACPI _OSC control for PCIe not granted, disabling ASPM
>[    0.439399] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
>[    0.439444] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
>[    0.439488] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
>[    0.439532] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
>[    0.439565] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
>[    0.439592] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
>[    0.439617] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
>[    0.439641] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
>[    0.439712] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.439715] vgaarb: loaded
>[    0.439716] vgaarb: bridge control possible 0000:01:00.0
>[    0.439761] SCSI subsystem initialized
>[    0.439773] libata version 3.00 loaded.
>[    0.439773] usbcore: registered new interface driver usbfs
>[    0.439773] usbcore: registered new interface driver hub
>[    0.439773] usbcore: registered new device driver usb
>[    0.439953] PCI: Using ACPI for IRQ routing
>[    0.447012] PCI: pci_cache_line_size set to 64 bytes
>[    0.447086] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
>[    0.447088] reserve RAM buffer: 00000000cd723000 - 00000000cfffffff 
>[    0.447091] reserve RAM buffer: 00000000cdf00000 - 00000000cfffffff 
>[    0.447153] NetLabel: Initializing
>[    0.447154] NetLabel:  domain hash size = 128
>[    0.447155] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.447163] NetLabel:  unlabeled traffic allowed by default
>[    0.447180] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.447182] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
>[    0.448967] Switching to clocksource hpet
>[    0.449694] Switched to NOHz mode on CPU #0
>[    0.449697] Switched to NOHz mode on CPU #5
>[    0.449710] Switched to NOHz mode on CPU #1
>[    0.449713] Switched to NOHz mode on CPU #2
>[    0.449718] Switched to NOHz mode on CPU #4
>[    0.449722] Switched to NOHz mode on CPU #3
>[    0.453623] pnp: PnP ACPI init
>[    0.453632] ACPI: bus type pnp registered
>[    0.453725] pnp 00:00: [bus 00-ff]
>[    0.453727] pnp 00:00: [io  0x0cf8-0x0cff]
>[    0.453729] pnp 00:00: [io  0x0000-0x03af window]
>[    0.453730] pnp 00:00: [io  0x03e0-0x0cf7 window]
>[    0.453732] pnp 00:00: [io  0x03b0-0x03df window]
>[    0.453733] pnp 00:00: [io  0x0d00-0xffff window]
>[    0.453734] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>[    0.453736] pnp 00:00: [mem 0x000c0000-0x000dffff window]
>[    0.453737] pnp 00:00: [mem 0xd0000000-0xffffffff window]
>[    0.453740] pnp 00:00: [mem 0x00000000 window]
>[    0.453767] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>[    0.453789] pnp 00:01: [mem 0xe0000000-0xefffffff]
>[    0.453821] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.453823] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.454044] pnp 00:02: [io  0x040b]
>[    0.454046] pnp 00:02: [io  0x04d6]
>[    0.454047] pnp 00:02: [io  0x0c00-0x0c01]
>[    0.454048] pnp 00:02: [io  0x0c14]
>[    0.454049] pnp 00:02: [io  0x0c50-0x0c51]
>[    0.454051] pnp 00:02: [io  0x0c52]
>[    0.454052] pnp 00:02: [io  0x0c6c]
>[    0.454053] pnp 00:02: [io  0x0c6f]
>[    0.454054] pnp 00:02: [io  0x0cd0-0x0cd1]
>[    0.454055] pnp 00:02: [io  0x0cd2-0x0cd3]
>[    0.454057] pnp 00:02: [io  0x0cd4-0x0cd5]
>[    0.454058] pnp 00:02: [io  0x0cd6-0x0cd7]
>[    0.454059] pnp 00:02: [io  0x0cd8-0x0cdf]
>[    0.454060] pnp 00:02: [io  0x0800-0x089f]
>[    0.454062] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
>[    0.454063] pnp 00:02: [io  0x0000-0x000f]
>[    0.454064] pnp 00:02: [io  0x0b20-0x0b3f]
>[    0.454066] pnp 00:02: [io  0x0900-0x090f]
>[    0.454067] pnp 00:02: [io  0x0910-0x091f]
>[    0.454068] pnp 00:02: [io  0xfe00-0xfefe]
>[    0.454069] pnp 00:02: [io  0x0060-0x005f disabled]
>[    0.454071] pnp 00:02: [io  0x0064-0x0063 disabled]
>[    0.454072] pnp 00:02: [mem 0xfec00000-0xfec00fff]
>[    0.454074] pnp 00:02: [mem 0xfee00000-0xfee00fff]
>[    0.454075] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
>[    0.454076] pnp 00:02: [mem 0xfed61000-0xfed70fff]
>[    0.454078] pnp 00:02: [mem 0xfec10000-0xfec10fff]
>[    0.454079] pnp 00:02: [mem 0xfed00000-0xfed00fff]
>[    0.454080] pnp 00:02: [mem 0xffc00000-0xffffffff]
>[    0.454125] system 00:02: [io  0x040b] has been reserved
>[    0.454127] system 00:02: [io  0x04d6] has been reserved
>[    0.454128] system 00:02: [io  0x0c00-0x0c01] has been reserved
>[    0.454130] system 00:02: [io  0x0c14] has been reserved
>[    0.454131] system 00:02: [io  0x0c50-0x0c51] has been reserved
>[    0.454133] system 00:02: [io  0x0c52] has been reserved
>[    0.454135] system 00:02: [io  0x0c6c] has been reserved
>[    0.454136] system 00:02: [io  0x0c6f] has been reserved
>[    0.454138] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
>[    0.454139] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
>[    0.454141] system 00:02: [io  0x0cd4-0x0cd5] has been reserved
>[    0.454143] system 00:02: [io  0x0cd6-0x0cd7] has been reserved
>[    0.454144] system 00:02: [io  0x0cd8-0x0cdf] has been reserved
>[    0.454146] system 00:02: [io  0x0800-0x089f] has been reserved
>[    0.454148] system 00:02: [io  0x0b20-0x0b3f] has been reserved
>[    0.454149] system 00:02: [io  0x0900-0x090f] has been reserved
>[    0.454151] system 00:02: [io  0x0910-0x091f] has been reserved
>[    0.454153] system 00:02: [io  0xfe00-0xfefe] has been reserved
>[    0.454155] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.454157] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.454159] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
>[    0.454161] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
>[    0.454162] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
>[    0.454164] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
>[    0.454168] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
>[    0.454170] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.454240] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
>[    0.454242] pnp 00:03: [io  0x0290-0x02af]
>[    0.454244] pnp 00:03: [io  0x0000-0xffffffffffffffff disabled]
>[    0.454270] system 00:03: [io  0x0290-0x02af] has been reserved
>[    0.454273] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.454281] pnp 00:04: [dma 4]
>[    0.454282] pnp 00:04: [io  0x0000-0x000f]
>[    0.454283] pnp 00:04: [io  0x0081-0x0083]
>[    0.454285] pnp 00:04: [io  0x0087]
>[    0.454286] pnp 00:04: [io  0x0089-0x008b]
>[    0.454287] pnp 00:04: [io  0x008f]
>[    0.454288] pnp 00:04: [io  0x00c0-0x00df]
>[    0.454302] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.454307] pnp 00:05: [io  0x0070-0x0071]
>[    0.454316] pnp 00:05: [irq 8]
>[    0.454330] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.454335] pnp 00:06: [io  0x0061]
>[    0.454349] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.454363] pnp 00:07: [io  0x0010-0x001f]
>[    0.454364] pnp 00:07: [io  0x0022-0x003f]
>[    0.454365] pnp 00:07: [io  0x0044-0x005f]
>[    0.454366] pnp 00:07: [io  0x0062-0x0063]
>[    0.454368] pnp 00:07: [io  0x0065-0x006f]
>[    0.454369] pnp 00:07: [io  0x0072-0x007f]
>[    0.454370] pnp 00:07: [io  0x0080]
>[    0.454371] pnp 00:07: [io  0x0084-0x0086]
>[    0.454372] pnp 00:07: [io  0x0088]
>[    0.454373] pnp 00:07: [io  0x008c-0x008e]
>[    0.454375] pnp 00:07: [io  0x0090-0x009f]
>[    0.454376] pnp 00:07: [io  0x00a2-0x00bf]
>[    0.454377] pnp 00:07: [io  0x00e0-0x00ef]
>[    0.454378] pnp 00:07: [io  0x04d0-0x04d1]
>[    0.454408] system 00:07: [io  0x04d0-0x04d1] has been reserved
>[    0.454410] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.454415] pnp 00:08: [io  0x00f0-0x00ff]
>[    0.454418] pnp 00:08: [irq 13]
>[    0.454434] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.454465] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.454519] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
>[    0.454547] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.454598] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
>[    0.454600] pnp 00:0b: [mem 0xfec20000-0xfec200ff]
>[    0.454628] system 00:0b: [mem 0xfec20000-0xfec200ff] could not be reserved
>[    0.454630] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.454707] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
>[    0.454726] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.454730] pnp: PnP ACPI: found 13 devices
>[    0.454731] ACPI: ACPI bus type pnp unregistered
>[    0.460213] PCI: max bus depth: 1 pci_try_num: 2
>[    0.460235] pci 0000:00:02.0: PCI bridge to [bus 01-01]
>[    0.460237] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>[    0.460239] pci 0000:00:02.0:   bridge window [mem 0xf4000000-0xf70fffff]
>[    0.460241] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.460244] pci 0000:00:04.0: PCI bridge to [bus 02-02]
>[    0.460246] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
>[    0.460248] pci 0000:00:04.0:   bridge window [mem 0xf7600000-0xf76fffff]
>[    0.460250] pci 0000:00:04.0:   bridge window [mem pref disabled]
>[    0.460253] pci 0000:00:05.0: PCI bridge to [bus 03-03]
>[    0.460254] pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
>[    0.460256] pci 0000:00:05.0:   bridge window [mem 0xf7500000-0xf75fffff]
>[    0.460258] pci 0000:00:05.0:   bridge window [mem pref disabled]
>[    0.460261] pci 0000:00:06.0: PCI bridge to [bus 04-04]
>[    0.460262] pci 0000:00:06.0:   bridge window [io  disabled]
>[    0.460264] pci 0000:00:06.0:   bridge window [mem 0xf7400000-0xf74fffff]
>[    0.460266] pci 0000:00:06.0:   bridge window [mem pref disabled]
>[    0.460268] pci 0000:00:07.0: PCI bridge to [bus 05-05]
>[    0.460269] pci 0000:00:07.0:   bridge window [io  disabled]
>[    0.460271] pci 0000:00:07.0:   bridge window [mem 0xf7300000-0xf73fffff]
>[    0.460273] pci 0000:00:07.0:   bridge window [mem pref disabled]
>[    0.460276] pci 0000:00:09.0: PCI bridge to [bus 06-06]
>[    0.460277] pci 0000:00:09.0:   bridge window [io  disabled]
>[    0.460279] pci 0000:00:09.0:   bridge window [mem 0xf7200000-0xf72fffff]
>[    0.460281] pci 0000:00:09.0:   bridge window [mem pref disabled]
>[    0.460283] pci 0000:00:14.4: PCI bridge to [bus 07-07]
>[    0.460284] pci 0000:00:14.4:   bridge window [io  disabled]
>[    0.460288] pci 0000:00:14.4:   bridge window [mem 0xf7100000-0xf71fffff]
>[    0.460291] pci 0000:00:14.4:   bridge window [mem pref disabled]
>[    0.460305] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
>[    0.460308] pci 0000:00:02.0: setting latency timer to 64
>[    0.460311] pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
>[    0.460313] pci 0000:00:04.0: setting latency timer to 64
>[    0.460316] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
>[    0.460318] pci 0000:00:05.0: setting latency timer to 64
>[    0.460324] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
>[    0.460326] pci 0000:00:06.0: setting latency timer to 64
>[    0.460329] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
>[    0.460331] pci 0000:00:07.0: setting latency timer to 64
>[    0.460333] pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
>[    0.460335] pci 0000:00:09.0: setting latency timer to 64
>[    0.460341] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
>[    0.460342] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
>[    0.460343] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
>[    0.460345] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
>[    0.460346] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
>[    0.460347] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
>[    0.460349] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
>[    0.460350] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>[    0.460352] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf70fffff]
>[    0.460354] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.460355] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>[    0.460357] pci_bus 0000:02: resource 1 [mem 0xf7600000-0xf76fffff]
>[    0.460358] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
>[    0.460359] pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf75fffff]
>[    0.460361] pci_bus 0000:04: resource 1 [mem 0xf7400000-0xf74fffff]
>[    0.460362] pci_bus 0000:05: resource 1 [mem 0xf7300000-0xf73fffff]
>[    0.460364] pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
>[    0.460365] pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
>[    0.460367] pci_bus 0000:07: resource 4 [io  0x0000-0x03af]
>[    0.460368] pci_bus 0000:07: resource 5 [io  0x03e0-0x0cf7]
>[    0.460370] pci_bus 0000:07: resource 6 [io  0x03b0-0x03df]
>[    0.460371] pci_bus 0000:07: resource 7 [io  0x0d00-0xffff]
>[    0.460372] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000bffff]
>[    0.460374] pci_bus 0000:07: resource 9 [mem 0x000c0000-0x000dffff]
>[    0.460375] pci_bus 0000:07: resource 10 [mem 0xd0000000-0xffffffff]
>[    0.460395] NET: Registered protocol family 2
>[    0.460703] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.462178] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>[    0.464085] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.464308] TCP: Hash tables configured (established 524288 bind 65536)
>[    0.464310] TCP reno registered
>[    0.464330] UDP hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.464410] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.464564] NET: Registered protocol family 1
>[    1.286178] pci 0000:01:00.0: Boot video device
>[    1.286275] PCI: CLS 64 bytes, default 64
>[    1.286316] Trying to unpack rootfs image as initramfs...
>[    1.486625] Freeing initrd memory: 14952k freed
>[    1.492326] PCI-DMA: Disabling AGP.
>[    1.492416] PCI-DMA: aperture base @ f8000000 size 65536 KB
>[    1.492418] init_memory_mapping: 00000000f8000000-00000000fc000000
>[    1.492420]  00f8000000 - 00fc000000 page 2M
>[    1.492425] PCI-DMA: using GART IOMMU.
>[    1.492427] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>[    1.496283] Intel AES-NI instructions are not detected.
>[    1.496371] audit: initializing netlink socket (disabled)
>[    1.496387] type=2000 audit(1313715942.495:1): initialized
>[    1.546262] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.617144] VFS: Disk quotas dquot_6.5.2
>[    1.617186] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.617537] msgmni has been set to 32206
>[    1.617580] SELinux:  Registering netfilter hooks
>[    1.618043] alg: No test for stdrng (krng)
>[    1.618056] NET: Registered protocol family 38
>[    1.618089] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    1.618124] io scheduler noop registered
>[    1.618125] io scheduler deadline registered
>[    1.618151] io scheduler cfq registered (default)
>[    1.618606] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.618623] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    1.618625] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    1.618871] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>[    1.618875] ACPI: Power Button [PWRB]
>[    1.618909] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>[    1.618911] ACPI: Power Button [PWRF]
>[    1.619033] ACPI: acpi_idle registered with cpuidle
>[    1.619059] ACPI: processor limited to max C-state 1
>[    1.620128] ERST: Table is not found!
>[    1.620200] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.677395] Non-volatile memory driver v1.3
>[    1.677396] Linux agpgart interface v0.103
>[    1.678100] brd: module loaded
>[    1.678408] loop: module loaded
>[    1.678537] ahci 0000:00:11.0: version 3.0
>[    1.678551] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>[    1.678687] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
>[    1.678689] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
>[    1.679254] scsi0 : ahci
>[    1.679329] scsi1 : ahci
>[    1.679382] scsi2 : ahci
>[    1.679436] scsi3 : ahci
>[    1.679488] scsi4 : ahci
>[    1.679540] scsi5 : ahci
>[    1.679569] ata1: SATA max UDMA/133 abar m1024@0xf770b000 port 0xf770b100 irq 19
>[    1.679572] ata2: SATA max UDMA/133 abar m1024@0xf770b000 port 0xf770b180 irq 19
>[    1.679575] ata3: SATA max UDMA/133 abar m1024@0xf770b000 port 0xf770b200 irq 19
>[    1.679577] ata4: SATA max UDMA/133 abar m1024@0xf770b000 port 0xf770b280 irq 19
>[    1.679580] ata5: SATA max UDMA/133 abar m1024@0xf770b000 port 0xf770b300 irq 19
>[    1.679582] ata6: SATA max UDMA/133 abar m1024@0xf770b000 port 0xf770b380 irq 19
>[    1.679707] ahci 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
>[    1.679743] ahci 0000:02:00.0: irq 72 for MSI/MSI-X
>[    1.679766] ahci: SSS flag set, parallel bus scan disabled
>[    1.679794] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
>[    1.679797] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
>[    1.679801] ahci 0000:02:00.0: setting latency timer to 64
>[    1.680040] scsi6 : ahci
>[    1.680097] scsi7 : ahci
>[    1.680124] ata7: SATA max UDMA/133 abar m512@0xf7600000 port 0xf7600100 irq 72
>[    1.680126] ata8: SATA max UDMA/133 abar m512@0xf7600000 port 0xf7600180 irq 72
>[    1.680198] Fixed MDIO Bus: probed
>[    1.680238] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.680286] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[    1.680297] ehci_hcd 0000:00:12.2: EHCI Host Controller
>[    1.680343] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
>[    1.680350] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>[    1.680371] QUIRK: Enable AMD PLL fix
>[    1.680380] ehci_hcd 0000:00:12.2: debug port 1
>[    1.680396] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7709000
>[    1.686086] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>[    1.686103] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.686105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.686107] usb usb1: Product: EHCI Host Controller
>[    1.686108] usb usb1: Manufacturer: Linux 2.6.40-4.fc15.x86_64 ehci_hcd
>[    1.686110] usb usb1: SerialNumber: 0000:00:12.2
>[    1.686190] hub 1-0:1.0: USB hub found
>[    1.686195] hub 1-0:1.0: 5 ports detected
>[    1.686364] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[    1.686376] ehci_hcd 0000:00:13.2: EHCI Host Controller
>[    1.686404] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
>[    1.686411] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>[    1.686428] ehci_hcd 0000:00:13.2: debug port 1
>[    1.686439] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf7707000
>[    1.692090] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>[    1.692103] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.692105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.692106] usb usb2: Product: EHCI Host Controller
>[    1.692107] usb usb2: Manufacturer: Linux 2.6.40-4.fc15.x86_64 ehci_hcd
>[    1.692109] usb usb2: SerialNumber: 0000:00:13.2
>[    1.692185] hub 2-0:1.0: USB hub found
>[    1.692188] hub 2-0:1.0: 5 ports detected
>[    1.692336] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[    1.692347] ehci_hcd 0000:00:16.2: EHCI Host Controller
>[    1.692374] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
>[    1.692381] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>[    1.692398] ehci_hcd 0000:00:16.2: debug port 1
>[    1.692408] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf7704000
>[    1.698088] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
>[    1.698106] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.698108] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.698109] usb usb3: Product: EHCI Host Controller
>[    1.698111] usb usb3: Manufacturer: Linux 2.6.40-4.fc15.x86_64 ehci_hcd
>[    1.698112] usb usb3: SerialNumber: 0000:00:16.2
>[    1.698182] hub 3-0:1.0: USB hub found
>[    1.698185] hub 3-0:1.0: 4 ports detected
>[    1.698274] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.698372] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    1.698384] ohci_hcd 0000:00:12.0: OHCI Host Controller
>[    1.698415] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
>[    1.698437] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf770a000
>[    1.753115] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.753117] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.753118] usb usb4: Product: OHCI Host Controller
>[    1.753119] usb usb4: Manufacturer: Linux 2.6.40-4.fc15.x86_64 ohci_hcd
>[    1.753121] usb usb4: SerialNumber: 0000:00:12.0
>[    1.753184] hub 4-0:1.0: USB hub found
>[    1.753189] hub 4-0:1.0: 5 ports detected
>[    1.753357] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    1.753368] ohci_hcd 0000:00:13.0: OHCI Host Controller
>[    1.753395] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
>[    1.753410] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7708000
>[    1.808110] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.808112] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.808113] usb usb5: Product: OHCI Host Controller
>[    1.808114] usb usb5: Manufacturer: Linux 2.6.40-4.fc15.x86_64 ohci_hcd
>[    1.808115] usb usb5: SerialNumber: 0000:00:13.0
>[    1.808178] hub 5-0:1.0: USB hub found
>[    1.808183] hub 5-0:1.0: 5 ports detected
>[    1.808320] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    1.808333] ohci_hcd 0000:00:14.5: OHCI Host Controller
>[    1.808358] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
>[    1.808371] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7706000
>[    1.863110] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.863112] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.863114] usb usb6: Product: OHCI Host Controller
>[    1.863115] usb usb6: Manufacturer: Linux 2.6.40-4.fc15.x86_64 ohci_hcd
>[    1.863116] usb usb6: SerialNumber: 0000:00:14.5
>[    1.863178] hub 6-0:1.0: USB hub found
>[    1.863183] hub 6-0:1.0: 2 ports detected
>[    1.863312] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    1.863323] ohci_hcd 0000:00:16.0: OHCI Host Controller
>[    1.863348] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
>[    1.863362] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf7705000
>[    1.918116] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.918118] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.918120] usb usb7: Product: OHCI Host Controller
>[    1.918121] usb usb7: Manufacturer: Linux 2.6.40-4.fc15.x86_64 ohci_hcd
>[    1.918123] usb usb7: SerialNumber: 0000:00:16.0
>[    1.918193] hub 7-0:1.0: USB hub found
>[    1.918198] hub 7-0:1.0: 4 ports detected
>[    1.918282] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.918326] usbcore: registered new interface driver usbserial
>[    1.918332] USB Serial support registered for generic
>[    1.918342] usbcore: registered new interface driver usbserial_generic
>[    1.918343] usbserial: USB Serial Driver core
>[    1.918348] USB Serial support registered for GSM modem (1-port)
>[    1.918377] usbcore: registered new interface driver option
>[    1.918378] option: v0.7.2:USB Driver for GSM modems
>[    1.918406] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    1.918779] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.918785] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.918828] mousedev: PS/2 mouse device common for all mice
>[    1.918990] rtc_cmos 00:05: RTC can wake from S4
>[    1.919104] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    1.919123] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    1.919191] device-mapper: uevent: version 1.0.3
>[    1.919241] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
>[    1.919279] cpuidle: using governor ladder
>[    1.919280] cpuidle: using governor menu
>[    1.919421] EFI Variables Facility v0.08 2004-May-17
>[    1.919516] usbcore: registered new interface driver usbhid
>[    1.919517] usbhid: USB HID core driver
>[    1.919569] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.919581] TCP cubic registered
>[    1.919582] Initializing XFRM netlink socket
>[    1.919680] NET: Registered protocol family 10
>[    1.919797] Mobile IPv6
>[    1.919799] NET: Registered protocol family 17
>[    1.919808] Registering the dns_resolver key type
>[    1.919867] PM: Hibernation image not present or could not be loaded.
>[    1.919874] registered taskstats version 1
>[    1.954614] IMA: No TPM chip found, activating TPM-bypass!
>[    1.954983]   Magic number: 7:56:54
>[    1.955117] rtc_cmos 00:05: setting system clock to 2011-08-19 01:05:43 UTC (1313715943)
>[    1.955156] Initializing network drop monitor service
>[    1.984130] ata6: SATA link down (SStatus 0 SControl 300)
>[    1.984193] ata5: SATA link down (SStatus 0 SControl 300)
>[    1.984258] ata4: SATA link down (SStatus 0 SControl 300)
>[    1.985086] ata7: SATA link down (SStatus 0 SControl 300)
>[    2.139115] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.139139] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.139162] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.140156] ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
>[    2.140158] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    2.140175] ata2.00: ATA-7: Hitachi HDS721075KLA330, GK8OAB0A, max UDMA/133
>[    2.140177] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    2.140185] ata3.00: ATA-7: Hitachi HDS721075KLA330, GK8OAB0A, max UDMA/133
>[    2.140187] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    2.141363] ata1.00: configured for UDMA/133
>[    2.141411] ata3.00: configured for UDMA/133
>[    2.141425] ata2.00: configured for UDMA/133
>[    2.141535] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
>[    2.141660] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.141786] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>[    2.141790] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDS72107 GK8O PQ: 0 ANSI: 5
>[    2.141889] sd 0:0:0:0: [sda] Write Protect is off
>[    2.141891] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.141905] sd 1:0:0:0: Attached scsi generic sg1 type 0
>[    2.141920] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
>[    2.141923] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.142027] sd 1:0:0:0: [sdb] Write Protect is off
>[    2.142029] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.142069] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDS72107 GK8O PQ: 0 ANSI: 5
>[    2.142073] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.142194] sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
>[    2.142228] sd 2:0:0:0: Attached scsi generic sg2 type 0
>[    2.142273] sd 2:0:0:0: [sdc] Write Protect is off
>[    2.142275] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    2.142322] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.149885]  sda: sda1 sda2
>[    2.150202] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.152311]  sdc: sdc1
>[    2.152576] sd 2:0:0:0: [sdc] Attached SCSI disk
>[    2.153158]  sdb: sdb1 sdb2 sdb3 sdb4
>[    2.153419] sd 1:0:0:0: [sdb] Attached SCSI disk
>[    2.447099] ata8: SATA link down (SStatus 0 SControl 300)
>[    2.448562] Freeing unused kernel memory: 944k freed
>[    2.448730] Write protecting the kernel read-only data: 10240k
>[    2.452376] Freeing unused kernel memory: 1256k freed
>[    2.457095] Freeing unused kernel memory: 1628k freed
>[    2.478639] dracut: dracut-009-12.fc15
>[    2.484653] dracut: rd.luks=0: removing cryptoluks activation
>[    2.491501] udev[180]: starting version 167
>[    2.496066] Refined TSC clocksource calibration: 3311.140 MHz.
>[    2.496071] Switching to clocksource tsc
>[    2.502188] wmi: Mapper loaded
>[    2.504497] [drm] Initialized drm 1.1.0 20060810
>[    2.508809] MXM: GUID detected in BIOS
>[    2.508901] nouveau 0000:01:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
>[    2.508923] nouveau 0000:01:00.0: setting latency timer to 64
>[    2.510085] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086c00a2)
>[    2.513253] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
>[    2.572984] [drm] nouveau 0000:01:00.0: ... appears to be valid
>[    2.572987] [drm] nouveau 0000:01:00.0: BIT BIOS found
>[    2.572989] [drm] nouveau 0000:01:00.0: Bios version 60.86.65.00
>[    2.572991] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
>[    2.572993] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
>[    2.572995] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000302 00020030
>[    2.572997] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000300 00020028
>[    2.572998] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011312 00020030
>[    2.573007] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 04011310 00c0c028
>[    2.573008] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
>[    2.573011] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
>[    2.573013] [drm] nouveau 0000:01:00.0:   0: 0x00002030: type 0x30 idx 0 tag 0x08
>[    2.573015] [drm] nouveau 0000:01:00.0:   1: 0x00001130: type 0x30 idx 1 tag 0x07
>[    2.573016] [drm] nouveau 0000:01:00.0:   2: 0x00000210: type 0x10 idx 2 tag 0xff
>[    2.573018] [drm] nouveau 0000:01:00.0:   3: 0x00000211: type 0x11 idx 3 tag 0xff
>[    2.573019] [drm] nouveau 0000:01:00.0:   4: 0x00000213: type 0x13 idx 4 tag 0xff
>[    2.573027] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBD2C
>[    2.596260] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC096
>[    2.612610] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCCD7
>[    2.612616] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xCDC9
>[    2.613685] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xCFC3
>[    2.613687] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD028
>[    2.633692] [drm] nouveau 0000:01:00.0: 0xD028: Condition still not met after 20ms, skipping following opcodes
>[    2.633703] [drm] nouveau 0000:01:00.0: timingset 255 does not exist
>[    2.652546] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
>[    2.652549] [drm] nouveau 0000:01:00.0: 0: memory 400MHz core 500MHz shader 1250MHz fanspeed 100%
>[    2.652563] [drm] nouveau 0000:01:00.0: c: memory 399MHz core 459MHz shader 918MHz voltage 1320mV
>[    2.652638] [TTM] Zone  kernel: Available graphics memory: 8246796 kiB.
>[    2.652640] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
>[    2.652641] [TTM] Initializing pool allocator.
>[    2.652654] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
>[    2.656957] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
>[    2.669419] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
>[    2.669420] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
>[    2.670027] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    2.670028] [drm] No driver support for vblank timestamp query.
>[    2.830506] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x40000000, bo ffff880412a09000
>[    2.830556] fbcon: nouveaufb (fb0) is primary device
>[    2.887193] Console: switching to colour frame buffer device 240x67
>[    2.889439] fb0: nouveaufb frame buffer device
>[    2.889440] drm: registered panic notifier
>[    2.889444] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
>[    2.908049] dracut: Starting plymouth daemon
>[    3.172798] dracut: rd.dm=0: removing DM RAID activation
>[    3.175217] dracut: rd.md=0: removing MD RAID activation
>[    3.553771] dracut: Scanning devices sda2 sdc1  for LVM logical volumes vg_introdesk/lv_root vg_introdesk/lv_swap
>[    3.564619] dracut: inactive '/dev/vg_introdesk/lv_home' [1.08 TiB] inherit
>[    3.564656] dracut: inactive '/dev/vg_introdesk/lv_swap' [5.88 GiB] inherit
>[    3.564689] dracut: inactive '/dev/vg_introdesk/lv_root' [50.00 GiB] inherit
>[    3.762575] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    3.877333] dracut: Checking filesystems
>[    3.877348] dracut: fsck -T -t noopts=_netdev -A -a
>[    3.935484] dracut: /dev/mapper/vg_introdesk-lv_root: clean, 412668/3276800 files, 4370792/13107200 blocks
>[    3.935608] dracut: Remounting /dev/mapper/vg_introdesk-lv_root with -o ro,
>[    3.940451] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    3.963142] dracut: Mounted root filesystem /dev/mapper/vg_introdesk-lv_root
>[    4.184662] dracut: Switching root
>[    4.576328] type=1404 audit(1313715946.120:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>[    4.786641] SELinux: 2048 avtab hash slots, 224251 rules.
>[    4.824475] SELinux: 2048 avtab hash slots, 224251 rules.
>[    5.005747] SELinux:  9 users, 13 roles, 3622 types, 192 bools, 1 sens, 1024 cats
>[    5.005750] SELinux:  81 classes, 224251 rules
>[    5.008659] SELinux:  Completing initialization.
>[    5.008660] SELinux:  Setting up existing superblocks.
>[    5.008668] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    5.008672] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>[    5.008682] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>[    5.008686] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[    5.008692] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    5.008707] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>[    5.009233] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>[    5.009237] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>[    5.009859] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>[    5.009863] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>[    5.009866] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>[    5.009880] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    5.009888] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[    5.009894] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>[    5.009905] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>[    5.009910] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>[    5.009914] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    5.010260] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    5.010265] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    5.010622] SELinux: initialized (dev dm-1, type ext4), uses xattr
>[    5.012320] type=1403 audit(1313715946.556:3): policy loaded auid=4294967295 ses=4294967295
>[    5.192802] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    5.193290] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.328170] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.340106] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.340425] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.352063] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.361112] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.373096] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.373393] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.385115] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.394113] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    5.418065] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
>[    5.436934] systemd[1]: Set hostname to <introdesk.casa>.
>[    6.731255] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[    6.732177] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[    6.732452] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[    6.732669] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[    6.770719] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[    7.317965] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    7.715963] EXT4-fs (dm-1): re-mounted. Opts: (null)
>[    8.529699] udev[520]: starting version 167
>[    8.539252] kvm: Nested Virtualization enabled
>[    8.539258] kvm: Nested Paging enabled
>[    8.667789] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
>[    8.667839] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
>[    8.667842] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
>[    8.667856] xhci_hcd 0000:04:00.0: setting latency timer to 64
>[    8.667859] xhci_hcd 0000:04:00.0: xHCI Host Controller
>[    8.668282] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
>[    8.677860] e1000e 0000:03:00.0: Disabling ASPM L0s 
>[    8.677883] e1000e 0000:03:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
>[    8.677905] e1000e 0000:03:00.0: setting latency timer to 64
>[    8.678064] e1000e 0000:03:00.0: irq 73 for MSI/MSI-X
>[    8.678306] xhci_hcd 0000:04:00.0: irq 51, io mem 0xf7400000
>[    8.678350] xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
>[    8.678354] xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X
>[    8.678358] xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
>[    8.678363] xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
>[    8.678367] xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
>[    8.678371] xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X
>[    8.678375] xhci_hcd 0000:04:00.0: irq 80 for MSI/MSI-X
>[    8.678455] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
>[    8.678458] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.678460] usb usb8: Product: xHCI Host Controller
>[    8.678461] usb usb8: Manufacturer: Linux 2.6.40-4.fc15.x86_64 xhci_hcd
>[    8.678463] usb usb8: SerialNumber: 0000:04:00.0
>[    8.678563] xHCI xhci_add_endpoint called for root hub
>[    8.678564] xHCI xhci_check_bandwidth called for root hub
>[    8.678587] hub 8-0:1.0: USB hub found
>[    8.678592] hub 8-0:1.0: 2 ports detected
>[    8.678654] xhci_hcd 0000:04:00.0: xHCI Host Controller
>[    8.678692] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
>[    8.678710] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
>[    8.678712] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.678714] usb usb9: Product: xHCI Host Controller
>[    8.678715] usb usb9: Manufacturer: Linux 2.6.40-4.fc15.x86_64 xhci_hcd
>[    8.678717] usb usb9: SerialNumber: 0000:04:00.0
>[    8.678778] xHCI xhci_add_endpoint called for root hub
>[    8.678779] xHCI xhci_check_bandwidth called for root hub
>[    8.678799] hub 9-0:1.0: USB hub found
>[    8.678805] hub 9-0:1.0: 2 ports detected
>[    8.679253] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
>[    8.679275] xhci_hcd 0000:05:00.0: setting latency timer to 64
>[    8.679277] xhci_hcd 0000:05:00.0: xHCI Host Controller
>[    8.679333] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
>[    8.688956] xhci_hcd 0000:05:00.0: irq 50, io mem 0xf7300000
>[    8.688996] xhci_hcd 0000:05:00.0: irq 81 for MSI/MSI-X
>[    8.689015] xhci_hcd 0000:05:00.0: irq 82 for MSI/MSI-X
>[    8.689020] xhci_hcd 0000:05:00.0: irq 83 for MSI/MSI-X
>[    8.689024] xhci_hcd 0000:05:00.0: irq 84 for MSI/MSI-X
>[    8.689028] xhci_hcd 0000:05:00.0: irq 85 for MSI/MSI-X
>[    8.689032] xhci_hcd 0000:05:00.0: irq 86 for MSI/MSI-X
>[    8.689036] xhci_hcd 0000:05:00.0: irq 87 for MSI/MSI-X
>[    8.689117] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
>[    8.689119] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.689121] usb usb10: Product: xHCI Host Controller
>[    8.689122] usb usb10: Manufacturer: Linux 2.6.40-4.fc15.x86_64 xhci_hcd
>[    8.689124] usb usb10: SerialNumber: 0000:05:00.0
>[    8.689212] xHCI xhci_add_endpoint called for root hub
>[    8.689214] xHCI xhci_check_bandwidth called for root hub
>[    8.689234] hub 10-0:1.0: USB hub found
>[    8.689240] hub 10-0:1.0: 2 ports detected
>[    8.689315] xhci_hcd 0000:05:00.0: xHCI Host Controller
>[    8.689351] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 11
>[    8.689368] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
>[    8.689370] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.689372] usb usb11: Product: xHCI Host Controller
>[    8.689373] usb usb11: Manufacturer: Linux 2.6.40-4.fc15.x86_64 xhci_hcd
>[    8.689375] usb usb11: SerialNumber: 0000:05:00.0
>[    8.689436] xHCI xhci_add_endpoint called for root hub
>[    8.689438] xHCI xhci_check_bandwidth called for root hub
>[    8.689462] hub 11-0:1.0: USB hub found
>[    8.689467] hub 11-0:1.0: 2 ports detected
>[    8.690891] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
>[    8.690921] xhci_hcd 0000:06:00.0: setting latency timer to 64
>[    8.690924] xhci_hcd 0000:06:00.0: xHCI Host Controller
>[    8.690992] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 12
>[    8.695389] xhci_hcd 0000:06:00.0: irq 48, io mem 0xf7200000
>[    8.695428] xhci_hcd 0000:06:00.0: irq 88 for MSI/MSI-X
>[    8.695433] xhci_hcd 0000:06:00.0: irq 89 for MSI/MSI-X
>[    8.695436] xhci_hcd 0000:06:00.0: irq 90 for MSI/MSI-X
>[    8.695441] xhci_hcd 0000:06:00.0: irq 91 for MSI/MSI-X
>[    8.695445] xhci_hcd 0000:06:00.0: irq 92 for MSI/MSI-X
>[    8.695449] xhci_hcd 0000:06:00.0: irq 93 for MSI/MSI-X
>[    8.695453] xhci_hcd 0000:06:00.0: irq 94 for MSI/MSI-X
>[    8.695531] usb usb12: New USB device found, idVendor=1d6b, idProduct=0002
>[    8.695532] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.695534] usb usb12: Product: xHCI Host Controller
>[    8.695536] usb usb12: Manufacturer: Linux 2.6.40-4.fc15.x86_64 xhci_hcd
>[    8.695538] usb usb12: SerialNumber: 0000:06:00.0
>[    8.695727] xHCI xhci_add_endpoint called for root hub
>[    8.695729] xHCI xhci_check_bandwidth called for root hub
>[    8.695765] hub 12-0:1.0: USB hub found
>[    8.695771] hub 12-0:1.0: 2 ports detected
>[    8.695838] xhci_hcd 0000:06:00.0: xHCI Host Controller
>[    8.695870] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 13
>[    8.695888] usb usb13: New USB device found, idVendor=1d6b, idProduct=0003
>[    8.695889] usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.695891] usb usb13: Product: xHCI Host Controller
>[    8.695893] usb usb13: Manufacturer: Linux 2.6.40-4.fc15.x86_64 xhci_hcd
>[    8.695894] usb usb13: SerialNumber: 0000:06:00.0
>[    8.695947] xHCI xhci_add_endpoint called for root hub
>[    8.695949] xHCI xhci_check_bandwidth called for root hub
>[    8.695965] hub 13-0:1.0: USB hub found
>[    8.695969] hub 13-0:1.0: 2 ports detected
>[    8.705130] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
>[    8.705851] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
>[    8.705903] SP5100 TCO timer: mmio address 0xbafe00 already in use
>[    8.709814] cfg80211: Calling CRDA to update world regulatory domain
>[    8.714327] MCE: In-kernel MCE decoding enabled.
>[    8.714796] EDAC MC: Ver: 2.1.0
>[    8.715120] AMD64 EDAC driver v3.4.0
>[    8.715509] ath9k 0000:07:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[    8.734208] microcode: CPU0: patch_level=0x010000bf
>[    8.757611] asus_wmi: ASUS WMI generic driver loaded
>[    8.757885] asus_wmi: Initialization: 0x0
>[    8.757904] asus_wmi: BIOS WMI version: 0.9
>[    8.757937] asus_wmi: SFUN value: 0x0
>[    8.758150] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input2
>[    8.775884] cfg80211: World regulatory domain updated:
>[    8.775887] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[    8.775889] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[    8.775891] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[    8.775893] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[    8.775894] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[    8.775896] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[    8.790106] microcode: CPU1: patch_level=0x010000bf
>[    8.791448] microcode: CPU2: patch_level=0x010000bf
>[    8.792712] microcode: CPU3: patch_level=0x010000bf
>[    8.794031] microcode: CPU4: patch_level=0x010000bf
>[    8.795257] microcode: CPU5: patch_level=0x010000bf
>[    8.796558] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   10.277031] EDAC amd64: DRAM ECC disabled.
>[   10.277038] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
>[   10.277040]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
>[   10.277041]  (Note that use of the override may cause unknown side effects.)
>[   10.278831] ath: EEPROM regdomain: 0x809c
>[   10.278832] ath: EEPROM indicates we should expect a country code
>[   10.278833] ath: doing EEPROM country->regdmn map search
>[   10.278835] ath: country maps to regdmn code: 0x52
>[   10.278836] ath: Country alpha2 being used: CN
>[   10.278837] ath: Regpair used: 0x52
>[   10.281689] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[   10.281693] ALSA sound/pci/hda/hda_intel.c:2413 Using LPIB position fix
>[   10.289122] ALSA sound/pci/hda/hda_intel.c:1490 Enable sync_write for stable communication
>[   10.293376] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
>[   10.293597] Registered led device: ath9k-phy0
>[   10.293600] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90012fe0000, irq=20
>[   10.293616] cfg80211: Calling CRDA for country: CN
>[   10.297532] hda_codec: ALC889: BIOS auto-probing.
>[   10.297536] ALSA sound/pci/hda/patch_realtek.c:1748 SKU: Nid=0x0 sku_cfg=0x0000846b
>[   10.297538] ALSA sound/pci/hda/patch_realtek.c:1750 SKU: port_connectivity=0x0
>[   10.297540] ALSA sound/pci/hda/patch_realtek.c:1751 SKU: enable_pcbeep=0x1
>[   10.297541] ALSA sound/pci/hda/patch_realtek.c:1752 SKU: check_sum=0x00000000
>[   10.297543] ALSA sound/pci/hda/patch_realtek.c:1753 SKU: customization=0x00000000
>[   10.297544] ALSA sound/pci/hda/patch_realtek.c:1754 SKU: external_amp=0x5
>[   10.297546] ALSA sound/pci/hda/patch_realtek.c:1755 SKU: platform_type=0x0
>[   10.297547] ALSA sound/pci/hda/patch_realtek.c:1756 SKU: swap=0x1
>[   10.297549] ALSA sound/pci/hda/patch_realtek.c:1757 SKU: override=0x1
>[   10.297554] ALSA sound/pci/hda/hda_codec.c:4707 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
>[   10.297556] ALSA sound/pci/hda/hda_codec.c:4711    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   10.297558] ALSA sound/pci/hda/hda_codec.c:4715    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[   10.297559] ALSA sound/pci/hda/hda_codec.c:4716    mono: mono_out=0x0
>[   10.297561] ALSA sound/pci/hda/hda_codec.c:4719    dig-out=0x11/0x1e
>[   10.297562] ALSA sound/pci/hda/hda_codec.c:4720    inputs:
>[   10.297564] ALSA sound/pci/hda/hda_codec.c:4724  Rear Mic=0x18
>[   10.297566] ALSA sound/pci/hda/hda_codec.c:4724  Front Mic=0x19
>[   10.297567] ALSA sound/pci/hda/hda_codec.c:4724  Line=0x1a
>[   10.297569] ALSA sound/pci/hda/hda_codec.c:4726 
>[   10.298200] ALSA sound/pci/hda/patch_realtek.c:1821 realtek: Enabling init ASM_ID=0x846b CODEC_ID=10ec0889
>[   10.300613] cfg80211: Regulatory domain changed to country: CN
>[   10.300616] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   10.300618] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   10.300620] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>[   10.309791] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
>[   10.320968] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[   10.336141] e1000e 0000:03:00.0: eth0: (PCI Express:2.5GT/s:Width x1) f4:6d:04:54:f7:7b
>[   10.336144] e1000e 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection
>[   10.336225] e1000e 0000:03:00.0: eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
>[   10.354099] udev[539]: renamed network interface eth0 to p21p1
>[   10.358085] Adding 6160380k swap on /dev/mapper/vg_introdesk-lv_swap.  Priority:0 extents:1 across:6160380k 
>[   10.387691] cfg80211: Calling CRDA for country: MX
>[   10.390214] cfg80211: Regulatory domain changed to country: MX
>[   10.390216] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   10.390218] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[   10.390220] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[   10.390222] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
>[   10.390224] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[   10.530031] usb 12-1: new low speed USB device number 2 using xhci_hcd
>[   10.547723] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
>[   10.548646] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
>[   10.549359] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
>[   10.549434] usb 12-1: New USB device found, idVendor=046d, idProduct=c31c
>[   10.549436] usb 12-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   10.549438] usb 12-1: Product: USB Keyboard
>[   10.549440] usb 12-1: Manufacturer: Logitech
>[   10.549780] usb 12-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   10.549784] usb 12-1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
>[   10.551836] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
>[   10.552780] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
>[   10.555220] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:09.0/0000:06:00.0/usb12/12-1/12-1:1.0/input/input4
>[   10.555302] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:06:00.0-1/input0
>[   10.556320] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
>[   10.561321] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
>[   10.561688] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
>[   10.562169] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
>[   10.562306] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:09.0/0000:06:00.0/usb12/12-1/12-1:1.1/input/input5
>[   10.562373] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:06:00.0-1/input1
>[   10.702260] systemd-fsck[815]: /dev/sda1: clean, 90/128016 files, 97715/512000 blocks
>[   10.716035] usb 12-2: new low speed USB device number 3 using xhci_hcd
>[   10.732385] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
>[   10.733188] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
>[   10.733700] xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
>[   10.733774] usb 12-2: New USB device found, idVendor=046d, idProduct=c05a
>[   10.733776] usb 12-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   10.733778] usb 12-2: Product: USB Optical Mouse
>[   10.733779] usb 12-2: Manufacturer: Logitech
>[   10.733871] usb 12-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   10.735295] xhci_hcd 0000:06:00.0: WARN: Stalled endpoint
>[   10.736681] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:09.0/0000:06:00.0/usb12/12-2/12-2:1.0/input/input6
>[   10.736765] generic-usb 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:06:00.0-2/input0
>[   10.873494] mtp-probe[843]: checking bus 12, device 3: "/sys/devices/pci0000:00/0000:00:09.0/0000:06:00.0/usb12/12-2"
>[   10.873502] mtp-probe[842]: checking bus 12, device 2: "/sys/devices/pci0000:00/0000:00:09.0/0000:06:00.0/usb12/12-1"
>[   10.948110] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[   10.985695] SELinux: initialized (dev sda1, type ext4), uses xattr
>[   11.175492] mtp-probe[842]: bus: 12, device: 2 was not an MTP device
>[   11.175500] mtp-probe[843]: bus: 12, device: 3 was not an MTP device
>[   12.485746] systemd-fsck[887]: /dev/mapper/vg_introdesk-lv_home: clean, 391392/72613888 files, 239427928/290455552 blocks
>[   12.600948] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
>[   12.600956] SELinux: initialized (dev dm-2, type ext4), uses xattr
>[   13.924904] acpid[929]: starting up with netlink and the input layer
>[   14.130640] avahi-daemon[928]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
>[   14.130869] avahi-daemon[928]: Successfully dropped root privileges.
>[   14.131210] avahi-daemon[928]: avahi-daemon 0.6.30 starting up.
>[   14.145935] avahi-daemon[928]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
>[   14.176860] acpid[929]: skipping incomplete file /etc/acpi/events/videoconf
>[   14.180167] acpid[929]: 1 rule loaded
>[   14.180274] acpid[929]: waiting for events: event logging is off
>[   14.438367] abrtd[937]: Unrecognized variable 'DumpLocation' in '/etc/abrt/abrt.conf'
>[   14.492460] ntpd[934]: ntpd 4.2.6p3@1.2290-o Fri May  6 16:26:49 UTC 2011 (1)
>[   14.493155] ntpd[934]: proto: precision = 0.073 usec
>[   14.493192] ntpd[934]: 0.0.0.0 c01d 0d kern kernel time sync enabled
>[   14.522802] ntpd[934]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
>[   14.523036] ntpd[934]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
>[   14.558023] ntpd[934]: Listen and drop on 1 v6wildcard :: UDP 123
>[   14.558323] ntpd[934]: Listen normally on 2 lo 127.0.0.1 UDP 123
>[   14.558359] ntpd[934]: Listen normally on 3 lo ::1 UDP 123
>[   14.558383] ntpd[934]: peers refreshed
>[   14.558588] ntpd[934]: Listening on routing socket on fd #20 for interface updates
>[   14.669455] ntpd[934]: Deferring DNS for 0.fedora.pool.ntp.org 1
>[   14.677084] ntpd[934]: Deferring DNS for 1.fedora.pool.ntp.org 1
>[   14.677230] ntpd[934]: Deferring DNS for 2.fedora.pool.ntp.org 1
>[   14.677375] ntpd[934]: Deferring DNS for 3.fedora.pool.ntp.org 1
>[   14.677613] ntpd[934]: 0.0.0.0 c016 06 restart
>[   14.677619] ntpd[934]: 0.0.0.0 c012 02 freq_set kernel -1.823 PPM
>[   14.677674] ntpd[954]: signal_no_reset: signal 17 had flags 4000000
>[   15.538967] smartd[947]: smartd 5.41 2011-06-09 r3365 [x86_64-linux-2.6.40-4.fc15.x86_64] (local build)
>[   15.538975] smartd[947]: Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>[   15.539178] smartd[947]: Opened configuration file /etc/smartd.conf
>[   15.669514] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   15.670218] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   15.756931] smartd[947]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
>[   15.837290] smartd[947]: Device: /dev/sda, type changed from 'scsi' to 'sat'
>[   15.837296] smartd[947]: Device: /dev/sda [SAT], opened
>[   15.950817] smartd[947]: Device: /dev/sda [SAT], Hitachi HDP725050GLA360, S/N:GEA530RF05U6HA, WWN:5-000cca-34dc2a47d, FW:GM4OA52A, 500 GB
>[   15.953352] smartd[947]: Device: /dev/sda [SAT], found in smartd database.
>[   16.678975] ntpd_intres[954]: host name not found: 0.fedora.pool.ntp.org
>[   16.679301] ntpd_intres[954]: host name not found: 1.fedora.pool.ntp.org
>[   16.679754] ntpd_intres[954]: host name not found: 2.fedora.pool.ntp.org
>[   16.680260] ntpd_intres[954]: host name not found: 3.fedora.pool.ntp.org
>[   16.785104] smartd[947]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
>[   16.785917] smartd[947]: Device: /dev/sdb, type changed from 'scsi' to 'sat'
>[   16.785950] smartd[947]: Device: /dev/sdb [SAT], opened
>[   16.786738] smartd[947]: Device: /dev/sdb [SAT], Hitachi HDS721075KLA330, S/N:GTF202P8GK1P5F, WWN:5-000cca-215c7c0a0, FW:GK8OAB0A, 750 GB
>[   16.789604] smartd[947]: Device: /dev/sdb [SAT], found in smartd database.
>[   16.844900] /usr/sbin/crond[951]: (CRON) INFO (running with inotify support)
>[   17.261842] smartd[947]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list.
>[   17.262681] smartd[947]: Device: /dev/sdc, type changed from 'scsi' to 'sat'
>[   17.262710] smartd[947]: Device: /dev/sdc [SAT], opened
>[   17.263414] smartd[947]: Device: /dev/sdc [SAT], Hitachi HDS721075KLA330, S/N:GTF202P8GK1K5F, WWN:5-000cca-215c7c024, FW:GK8OAB0A, 750 GB
>[   17.266092] smartd[947]: Device: /dev/sdc [SAT], found in smartd database.
>[   17.380847] NetworkManager[949]: <info> NetworkManager (version 0.8.9997-6.git20110721.fc15) is starting...
>[   17.380854] NetworkManager[949]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
>[   17.749333] smartd[947]: Device: /dev/sdc [SAT], is SMART capable. Adding to "monitor" list.
>[   17.749415] smartd[947]: Monitoring 3 ATA and 0 SCSI devices
>[   18.430971] dbus[990]: avc:  netlink poll: error 4
>[   18.434050] abrtd[937]: Init complete, entering main loop
>[   18.434357] avahi-daemon[928]: Successfully called chroot().
>[   18.434362] avahi-daemon[928]: Successfully dropped remaining capabilities.
>[   18.459777] avahi-daemon[928]: Loading service file /services/ssh.service.
>[   18.489397] avahi-daemon[928]: Loading service file /services/udisks.service.
>[   18.540271] avahi-daemon[928]: Network interface enumeration completed.
>[   18.540378] avahi-daemon[928]: Registering HINFO record with values 'X86_64'/'LINUX'.
>[   18.540450] avahi-daemon[928]: Server startup complete. Host name is introdesk.local. Local service cookie is 2234062123.
>[   18.540484] avahi-daemon[928]: Service "introdesk" (/services/udisks.service) successfully established.
>[   18.540506] avahi-daemon[928]: Service "introdesk" (/services/ssh.service) successfully established.
>[   20.022190] e1000e 0000:03:00.0: irq 73 for MSI/MSI-X
>[   20.074117] e1000e 0000:03:00.0: irq 73 for MSI/MSI-X
>[   20.076258] ADDRCONF(NETDEV_UP): p21p1: link is not ready
>[   20.308863] powernow-k8: Found 1 AMD Phenom(tm) II X6 1100T Processor (6 cpu cores) (version 2.20.00)
>[   20.308875] powernow-k8: Core Performance Boosting: on.
>[   20.308920] powernow-k8:    0 : pstate 0 (3300 MHz)
>[   20.308922] powernow-k8:    1 : pstate 1 (2500 MHz)
>[   20.308923] powernow-k8:    2 : pstate 2 (1700 MHz)
>[   20.308924] powernow-k8:    3 : pstate 3 (800 MHz)
>[   20.528784] RPC: Registered named UNIX socket transport module.
>[   20.528787] RPC: Registered udp transport module.
>[   20.528788] RPC: Registered tcp transport module.
>[   20.528789] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   20.560589] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>[   20.711198] Bluetooth: Core ver 2.16
>[   20.711402] NET: Registered protocol family 31
>[   20.711403] Bluetooth: HCI device and connection manager initialized
>[   20.711405] Bluetooth: HCI socket layer initialized
>[   20.711406] Bluetooth: L2CAP socket layer initialized
>[   20.711487] Bluetooth: SCO socket layer initialized
>[   20.936132] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   20.936140] Bluetooth: BNEP filters: protocol multicast
>[   21.610053] e1000e: p21p1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>[   21.610065] e1000e 0000:03:00.0: p21p1: 10/100 speed: disabling TSO
>[   21.615830] ADDRCONF(NETDEV_CHANGE): p21p1: link becomes ready
>[   22.111637] 802.1Q VLAN Support v1.8
>[   22.111669] 8021q: adding VLAN 0 to HW filter on device p21p1
>[   24.261981] FS-Cache: Loaded
>[   24.403536] FS-Cache: Netfs 'nfs' registered for caching
>[   24.669995] SELinux: initialized (dev 0:26, type nfs), uses genfs_contexts
>[   31.762111] p21p1: no IPv6 routers present
>[   32.482581] Bridge firewalling registered
>[   32.889417] ADDRCONF(NETDEV_UP): virbr0: link is not ready
>[   33.491912] Ebtables v2.0 registered
>[   36.844775] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[   36.844850] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[   36.889101] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[   36.889202] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[   47.585012] [drm:drm_debugfs_create_files] *ERROR* Cannot create /sys/kernel/debug/dri/!ï¿½%ï¿½ï¿½ï¿½ï¿½/4
>[   55.536763] fuse init (API version 7.16)
>[   55.566620] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>[   55.583760] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[   76.117354] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[   94.005452] ADDRCONF(NETDEV_UP): br0: link is not ready
>[  129.679564] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[  154.155372] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[  257.619212] device p21p1 entered promiscuous mode
>[  257.619444] br0: topology change detected, propagating
>[  257.619455] br0: port 1(p21p1) entering forwarding state
>[  257.619472] br0: port 1(p21p1) entering forwarding state
>[  257.626293] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
>[  260.663451] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[  268.642117] br0: no IPv6 routers present
>[  283.218157] usb 3-4: new high speed USB device number 2 using ehci_hcd
>[  283.320141] usb 3-4: device descriptor read/64, error -32
>[  283.523126] usb 3-4: device descriptor read/64, error -32
>[  283.726145] usb 3-4: new high speed USB device number 3 using ehci_hcd
>[  283.828139] usb 3-4: device descriptor read/64, error -32
>[  284.031136] usb 3-4: device descriptor read/64, error -32
>[  284.234147] usb 3-4: new high speed USB device number 4 using ehci_hcd
>[  284.636151] usb 3-4: device not accepting address 4, error -32
>[  284.738141] usb 3-4: new high speed USB device number 5 using ehci_hcd
>[  285.140158] usb 3-4: device not accepting address 5, error -32
>[  285.140188] hub 3-0:1.0: unable to enumerate USB device on port 4
>[  285.433159] usb 7-4: new full speed USB device number 2 using ohci_hcd
>[  285.561166] usb 7-4: device descriptor read/64, error -32
>[  285.790116] usb 7-4: device descriptor read/64, error -32
>[  286.014165] usb 7-4: new full speed USB device number 3 using ohci_hcd
>[  286.142149] usb 7-4: device descriptor read/64, error -32
>[  286.371154] usb 7-4: device descriptor read/64, error -32
>[  286.595152] usb 7-4: new full speed USB device number 4 using ohci_hcd
>[  286.998162] usb 7-4: device not accepting address 4, error -32
>[  287.121151] usb 7-4: new full speed USB device number 5 using ohci_hcd
>[  287.525175] usb 7-4: device not accepting address 5, error -32
>[  287.525228] hub 7-0:1.0: unable to enumerate USB device on port 4
>[  294.383651] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[  309.007548] exe (3730): /proc/3730/oom_adj is deprecated, please use /proc/3730/oom_score_adj instead.

Actions: View

Attachments on bug 731929: 915360