Attachment 915425 Details for Bug 800520 – Comment

Comment

comment_4520637.txt (text/plain), 66.83 KB, created by Harald Reindl on 2012-03-15 21:23:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Harald Reindl

Created: 2012-03-15 21:23:47 UTC

Size: 66.83 KB

patch

obsolete

>3.2.10-2.2.fc16.x86_64:
>
>* no longer IRQ messages
>* WLAN works fine as AP
>* keyborad wors
>* mouse works
>___________________________________-
>
>if we sooner or later get rid of the ioctl-messages i would be happy
>(triggered by /sbin/mdadm --detail /dev/mdX)
>scsi_verify_blk_ioctl: 6 callbacks suppressed
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>___________________________________-
>
>however, this is the dmesg-output of the working kernel
>
>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 3.2.10-2.2.fc16.x86_64 (mockbuild@x86-13.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 15 19:42:27 UTC 2012
>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.10-2.2.fc16.x86_64 root=UUID=b935b5db-0051-4f7f-83ac-6a6651fe0988 ro rd_MD_UUID=b7475879:c95d9a47:c5043c02:0c5ae720 rd_MD_UUID=1d691642:baed26df:1d197496:4fb00ff8 rd_MD_UUID=ea253255:cb915401:f32794ad:ce0fe396 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=de_DE.UTF-8 elevator=cfq selinux=0 ipv6.disable_ipv6=1 clocksource=hpet noisapnp noresume nf_conntrack.acct=1 printk.time=0 nmi_watchdog=0 pcie_aspm=force i915.i915_enable_rc6=1 i915.semaphores=1 i915.i915_enable_fbc=1 consoleblank=0 acpi_osi=Linux SYSFONT=latarcyrheb-sun16 KEYTABLE=de-latin1-nodeadkeys
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
>[    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
>[    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
>[    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
>[    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
>[    0.000000]  BIOS-e820: 0000000040200000 - 00000000cabf1000 (usable)
>[    0.000000]  BIOS-e820: 00000000cabf1000 - 00000000cac3e000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000cac3e000 - 00000000cac4c000 (ACPI data)
>[    0.000000]  BIOS-e820: 00000000cac4c000 - 00000000cac4d000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000cac4d000 - 00000000cac68000 (reserved)
>[    0.000000]  BIOS-e820: 00000000cac68000 - 00000000cac79000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000cac79000 - 00000000cad00000 (reserved)
>[    0.000000]  BIOS-e820: 00000000cad00000 - 00000000cad01000 (usable)
>[    0.000000]  BIOS-e820: 00000000cad01000 - 00000000cad13000 (reserved)
>[    0.000000]  BIOS-e820: 00000000cad13000 - 00000000cad20000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000cad20000 - 00000000cad31000 (reserved)
>[    0.000000]  BIOS-e820: 00000000cad31000 - 00000000cad74000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000cad74000 - 00000000cb000000 (usable)
>[    0.000000]  BIOS-e820: 00000000cb800000 - 00000000cfa00000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>[    0.000000]  BIOS-e820: 0000000100000000 - 000000042e600000 (usable)
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI 2.7 present.
>[    0.000000] DMI: Hewlett-Packard HP Compaq 8200 Elite CMT PC/1494, BIOS J01 v02.15 11/10/2011
>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>[    0.000000] No AGP bridge found
>[    0.000000] last_pfn = 0x42e600 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0CB800000 mask FFF800000 uncachable
>[    0.000000]   1 base 0CC000000 mask FFC000000 uncachable
>[    0.000000]   2 base 0D0000000 mask FF0000000 uncachable
>[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
>[    0.000000]   4 base 42E600000 mask FFFE00000 uncachable
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [ffff8800000f4ca0] f4ca0
>[    0.000000] initial memory mapped : 0 - 20000000
>[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
>[    0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
>[    0.000000]  0000000000 - 00cb000000 page 2M
>[    0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
>[    0.000000] init_memory_mapping: 0000000100000000-000000042e600000
>[    0.000000]  0100000000 - 042e600000 page 2M
>[    0.000000] kernel direct mapping tables up to 42e600000 @ cafee000-cb000000
>[    0.000000] RAMDISK: 3630e000 - 3717f000
>[    0.000000] ACPI: RSDP 00000000000fe700 00024 (v02 HPQOEM)
>[    0.000000] ACPI: XSDT 00000000cac3e070 0005C (v01 HPQOEM SLIC-BPC 01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 00000000cac45b88 000F4 (v04 HPQOEM SLIC-BPC 01072009 AMI  00010013)
>[    0.000000] ACPI: DSDT 00000000cac3e158 07A2A (v02 HPQOEM SLIC-BPC 00000007 INTL 20051117)
>[    0.000000] ACPI: FACS 00000000cad17f80 00040
>[    0.000000] ACPI: APIC 00000000cac45c80 00092 (v03 HPQOEM SLIC-BPC 01072009 AMI  00010013)
>[    0.000000] ACPI: SSDT 00000000cac45d18 001D6 (v01 AMICPU     PROC 00000001 MSFT 03000001)
>[    0.000000] ACPI: MCFG 00000000cac45ef0 0003C (v01 HPQOEM SLIC-BPC 01072009 MSFT 00000097)
>[    0.000000] ACPI: HPET 00000000cac45f30 00038 (v01 HPQOEM SLIC-BPC 01072009 AMI. 00000004)
>[    0.000000] ACPI: SSDT 00000000cac45f68 05270 (v01 COMPAQ      WMI 00000001 MSFT 03000001)
>[    0.000000] ACPI: DMAR 00000000cac4b1d8 000E8 (v01 ALASKA    A M I 00000001 INTL 00000001)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at 0000000000000000-000000042e600000
>[    0.000000] Initmem setup node 0 0000000000000000-000000042e600000
>[    0.000000]   NODE_DATA [000000042e5ec000 - 000000042e5fffff]
>[    0.000000]  [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041dc00000-ffff88042dbfffff] on node 0
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000010 -> 0x00001000
>[    0.000000]   DMA32    0x00001000 -> 0x00100000
>[    0.000000]   Normal   0x00100000 -> 0x0042e600
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[7] active PFN ranges
>[    0.000000]     0: 0x00000010 -> 0x0000009b
>[    0.000000]     0: 0x00000100 -> 0x00020000
>[    0.000000]     0: 0x00020200 -> 0x00040000
>[    0.000000]     0: 0x00040200 -> 0x000cabf1
>[    0.000000]     0: 0x000cad00 -> 0x000cad01
>[    0.000000]     0: 0x000cad74 -> 0x000cb000
>[    0.000000]     0: 0x00100000 -> 0x0042e600
>[    0.000000] On node 0 totalpages: 4165641
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 5 pages reserved
>[    0.000000]   DMA zone: 3910 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 16320 pages used for memmap
>[    0.000000]   DMA32 zone: 809662 pages, LIFO batch:31
>[    0.000000]   Normal zone: 52120 pages used for memmap
>[    0.000000]   Normal zone: 3283560 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
>[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
>[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
>[    0.000000] PM: Registered nosave memory: 00000000cabf1000 - 00000000cac3e000
>[    0.000000] PM: Registered nosave memory: 00000000cac3e000 - 00000000cac4c000
>[    0.000000] PM: Registered nosave memory: 00000000cac4c000 - 00000000cac4d000
>[    0.000000] PM: Registered nosave memory: 00000000cac4d000 - 00000000cac68000
>[    0.000000] PM: Registered nosave memory: 00000000cac68000 - 00000000cac79000
>[    0.000000] PM: Registered nosave memory: 00000000cac79000 - 00000000cad00000
>[    0.000000] PM: Registered nosave memory: 00000000cad01000 - 00000000cad13000
>[    0.000000] PM: Registered nosave memory: 00000000cad13000 - 00000000cad20000
>[    0.000000] PM: Registered nosave memory: 00000000cad20000 - 00000000cad31000
>[    0.000000] PM: Registered nosave memory: 00000000cad31000 - 00000000cad74000
>[    0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cb800000
>[    0.000000] PM: Registered nosave memory: 00000000cb800000 - 00000000cfa00000
>[    0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000fed1c000
>[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
>[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
>[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
>[    0.000000] Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f31c000)
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88042e200000 s83072 r8192 d23424 u262144
>[    0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4097132
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.10-2.2.fc16.x86_64 root=UUID=b935b5db-0051-4f7f-83ac-6a6651fe0988 ro rd_MD_UUID=b7475879:c95d9a47:c5043c02:0c5ae720 rd_MD_UUID=1d691642:baed26df:1d197496:4fb00ff8 rd_MD_UUID=ea253255:cb915401:f32794ad:ce0fe396 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=de_DE.UTF-8 elevator=cfq selinux=0 ipv6.disable_ipv6=1 clocksource=hpet noisapnp noresume nf_conntrack.acct=1 printk.time=0 nmi_watchdog=0 pcie_aspm=force i915.i915_enable_rc6=1 i915.semaphores=1 i915.i915_enable_fbc=1 consoleblank=0 acpi_osi=Linux SYSFONT=latarcyrheb-sun16 KEYTABLE=de-latin1-nodeadkeys
>PCIe ASPM is forcibly enabled
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
>Checking aperture...
>No AGP bridge found
>Memory: 16304276k/17537024k available (6086k kernel code, 874460k absent, 358288k reserved, 5003k data, 1596k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>Hierarchical RCU implementation.
>	RCU dyntick-idle grace-period acceleration is enabled.
>NR_IRQS:16640 nr_irqs:744 16
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>allocated 134217728 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 3392.406 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.81 BogoMIPS (lpj=3392406)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>SELinux:  Disabled at boot.
>Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>Initializing cgroup subsys perf_event
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>mce: CPU supports 9 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>ACPI: Core revision 20110623
>ftrace: allocating 22858 entries in 90 pages
>DMAR: Host address width 36
>DMAR: DRHD base: 0x000000fed90000 flags: 0x0
>IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
>DMAR: DRHD base: 0x000000fed91000 flags: 0x1
>IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
>DMAR: RMRR base: 0x000000cac4d000 end: 0x000000cac5bfff
>DMAR: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
>IOAPIC id 0 under DRHD base  0xfed91000 IOMMU 1
>HPET id 0 under DRHD base 0xfed91000
>HPET id 0 under DRHD base 0xfed91000
>HPET id 0 under DRHD base 0xfed91000
>HPET id 0 under DRHD base 0xfed91000
>HPET id 0 under DRHD base 0xfed91000
>HPET id 0 under DRHD base 0xfed91000
>HPET id 0 under DRHD base 0xfed91000
>HPET id 0 under DRHD base 0xfed91000
>Enabled IRQ remapping in x2apic mode
>Enabling x2apic
>Enabled x2apic
>Switched APIC routing to cluster x2apic.
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping 07
>Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
>PEBS disabled due to CPU errata.
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>Booting Node   0, Processors  #1
>smpboot cpu 1: start_ip = 96000
> #2
>smpboot cpu 2: start_ip = 96000
> #3
>smpboot cpu 3: start_ip = 96000
> #4
>smpboot cpu 4: start_ip = 96000
> #5
>smpboot cpu 5: start_ip = 96000
> #6
>smpboot cpu 6: start_ip = 96000
> #7 Ok.
>smpboot cpu 7: start_ip = 96000
>Brought up 8 CPUs
>Total of 8 processors activated (54270.83 BogoMIPS).
>devtmpfs: initialized
>PM: Registering ACPI NVS region at cabf1000 (315392 bytes)
>PM: Registering ACPI NVS region at cac4c000 (4096 bytes)
>PM: Registering ACPI NVS region at cac68000 (69632 bytes)
>PM: Registering ACPI NVS region at cad13000 (53248 bytes)
>PM: Registering ACPI NVS region at cad31000 (274432 bytes)
>atomic64 test passed for x86-64 platform with CX8 and with SSE
>RTC time: 21:17:02, date: 03/15/12
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: Added _OSI(Linux)
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: SSDT 00000000cad1f898 006F4 (v01    AMI      IST 00000001 MSFT 03000001)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 006F4 (v01    AMI      IST 00000001 MSFT 03000001)
>ACPI: SSDT 00000000cad16d98 000E4 (v01    AMI      CST 00000001 MSFT 03000001)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 000E4 (v01    AMI      CST 00000001 MSFT 03000001)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af]
>pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df]
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
>pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xffffffff]
>pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
>pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:02.0: [8086:0102] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
>pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
>pci 0000:00:19.0: reg 10: [mem 0xfe700000-0xfe71ffff]
>pci 0000:00:19.0: reg 14: [mem 0xfe728000-0xfe728fff]
>pci 0000:00:19.0: reg 18: [io  0xf080-0xf09f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
>pci 0000:00:1a.0: reg 10: [mem 0xfe727000-0xfe7273ff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: PME# disabled
>pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xfe720000-0xfe723fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
>pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.6: PME# disabled
>pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
>pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.7: PME# disabled
>pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 10: [mem 0xfe726000-0xfe7263ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: PME# disabled
>pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:1c4e] type 0 class 0x000601
>pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
>pci 0000:00:1f.2: reg 10: [io  0xf0d0-0xf0d7]
>pci 0000:00:1f.2: reg 14: [io  0xf0c0-0xf0c3]
>pci 0000:00:1f.2: reg 18: [io  0xf0b0-0xf0b7]
>pci 0000:00:1f.2: reg 1c: [io  0xf0a0-0xf0a3]
>pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
>pci 0000:00:1f.2: reg 24: [mem 0xfe725000-0xfe7257ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0xfe724000-0xfe7240ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
>pci 0000:01:00.0: [8086:10d3] type 0 class 0x000200
>pci 0000:01:00.0: reg 10: [mem 0xfe6c0000-0xfe6dffff]
>pci 0000:01:00.0: reg 14: [mem 0xfe600000-0xfe67ffff]
>pci 0000:01:00.0: reg 18: [io  0xe000-0xe01f]
>pci 0000:01:00.0: reg 1c: [mem 0xfe6e0000-0xfe6e3fff]
>pci 0000:01:00.0: reg 30: [mem 0xfe680000-0xfe6bffff pref]
>pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
>pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
>pci 0000:02:00.0: reg 10: [mem 0xfe500000-0xfe501fff 64bit]
>pci 0000:02:00.0: PME# supported from D0 D3hot
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [mem 0xfe500000-0xfe5fffff]
>pci 0000:03:00.0: [168c:0024] type 0 class 0x000280
>pci 0000:03:00.0: reg 10: [mem 0xfe400000-0xfe40ffff 64bit]
>pci 0000:03:00.0: supports D1
>pci 0000:03:00.0: PME# supported from D0 D1 D3hot
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.4: PCI bridge to [bus 03-03]
>pci 0000:00:1c.4:   bridge window [mem 0xfe400000-0xfe4fffff]
>pci 0000:00:1c.6: PCI bridge to [bus 04-04]
>pci 0000:00:1c.7: PCI bridge to [bus 05-05]
>pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xcfa00000-0xffffffff] (subtractive decode)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
> pci0000:00: ACPI _OSC control (0x1d) granted
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:02.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009bc00 - 000000000009ffff
>reserve RAM buffer: 00000000cabf1000 - 00000000cbffffff
>reserve RAM buffer: 00000000cad01000 - 00000000cbffffff
>reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
>reserve RAM buffer: 000000042e600000 - 000000042fffffff
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x03af window]
>pnp 00:00: [io  0x03e0-0x0cf7 window]
>pnp 00:00: [io  0x03b0-0x03df window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000dffff window]
>pnp 00:00: [mem 0xcfa00000-0xffffffff window]
>pnp 00:00: [mem 0x00000000 window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [mem 0xfed10000-0xfed19fff]
>pnp 00:01: [mem 0xe0000000-0xefffffff]
>pnp 00:01: [mem 0xfed90000-0xfed93fff]
>pnp 00:01: [mem 0xfed20000-0xfed3ffff]
>pnp 00:01: [mem 0xfee00000-0xfee0ffff]
>system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
>system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
>system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
>pnp 00:02: [io  0x0620-0x063f]
>pnp 00:02: [io  0x0800-0x07ff disabled]
>pnp 00:02: [io  0x0610-0x061f]
>system 00:02: [io  0x0620-0x063f] has been reserved
>system 00:02: [io  0x0610-0x061f] has been reserved
>system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:03: [io  0x0060]
>pnp 00:03: [io  0x0064]
>pnp 00:03: [irq 1]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>pnp 00:04: [irq 12]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
>pnp 00:05: [dma 4]
>pnp 00:05: [io  0x0000-0x000f]
>pnp 00:05: [io  0x0081-0x0083]
>pnp 00:05: [io  0x0087]
>pnp 00:05: [io  0x0089-0x008b]
>pnp 00:05: [io  0x008f]
>pnp 00:05: [io  0x00c0-0x00df]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:06: [io  0x0070-0x0071]
>pnp 00:06: [irq 8]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:07: [io  0x0061]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:08: [io  0x0010-0x001f]
>pnp 00:08: [io  0x0022-0x003f]
>pnp 00:08: [io  0x0044-0x005f]
>pnp 00:08: [io  0x0062-0x0063]
>pnp 00:08: [io  0x0065-0x006f]
>pnp 00:08: [io  0x0072-0x007f]
>pnp 00:08: [io  0x0080]
>pnp 00:08: [io  0x0084-0x0086]
>pnp 00:08: [io  0x0088]
>pnp 00:08: [io  0x008c-0x008e]
>pnp 00:08: [io  0x0090-0x009f]
>pnp 00:08: [io  0x00a2-0x00bf]
>pnp 00:08: [io  0x00e0-0x00ef]
>pnp 00:08: [io  0x04d0-0x04d1]
>system 00:08: [io  0x04d0-0x04d1] has been reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:09: [io  0x00f0-0x00ff]
>pnp 00:09: [irq 13]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:0a: [io  0x03f8-0x03ff]
>pnp 00:0a: [irq 4]
>pnp 00:0a: [dma 0 disabled]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:0b: [io  0x0400-0x0453]
>pnp 00:0b: [io  0x0458-0x047f]
>pnp 00:0b: [io  0x1180-0x119f]
>pnp 00:0b: [io  0x0500-0x057f]
>pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:0b: [mem 0xfec00000-0xfecfffff]
>pnp 00:0b: [mem 0xfed08000-0xfed08fff]
>pnp 00:0b: [mem 0xff000000-0xffffffff]
>system 00:0b: [io  0x0400-0x0453] has been reserved
>system 00:0b: [io  0x0458-0x047f] has been reserved
>system 00:0b: [io  0x1180-0x119f] has been reserved
>system 00:0b: [io  0x0500-0x057f] has been reserved
>system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
>system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
>system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:0c: [io  0x0454-0x0457]
>system 00:0c: [io  0x0454-0x0457] has been reserved
>system 00:0c: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>pnp 00:0d: [mem 0xfed00000-0xfed003ff]
>pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:0e: [mem 0xfed40000-0xfed44fff]
>system 00:0e: [mem 0xfed40000-0xfed44fff] has been reserved
>system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0:   bridge window [mem 0xfe500000-0xfe5fffff]
>pci 0000:00:1c.4: PCI bridge to [bus 03-03]
>pci 0000:00:1c.4:   bridge window [mem 0xfe400000-0xfe4fffff]
>pci 0000:00:1c.6: PCI bridge to [bus 04-04]
>pci 0000:00:1c.7: PCI bridge to [bus 05-05]
>pci 0000:00:1e.0: PCI bridge to [bus 06-06]
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.6: setting latency timer to 64
>pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.7: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
>pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
>pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
>pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: resource 10 [mem 0xcfa00000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
>pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff]
>pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
>pci_bus 0000:06: resource 4 [io  0x0000-0x03af]
>pci_bus 0000:06: resource 5 [io  0x03e0-0x0cf7]
>pci_bus 0000:06: resource 6 [io  0x03b0-0x03df]
>pci_bus 0000:06: resource 7 [io  0x0d00-0xffff]
>pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:06: resource 10 [mem 0xcfa00000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>UDP hash table entries: 8192 (order: 6, 262144 bytes)
>UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1a.0: PCI INT A disabled
>pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1d.0: PCI INT A disabled
>pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:02:00.0: PCI INT A disabled
>PCI: CLS 64 bytes, default 64
>Unpacking initramfs...
>Freeing initrd memory: 14788k freed
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff8800c6bf1000 - ffff8800cabf1000
>software IO TLB at phys 0xc6bf1000 - 0xcabf1000
>alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
>audit: initializing netlink socket (disabled)
>type=2000 audit(1331846222.053:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 31873
>alg: No test for stdrng (krng)
>NET: Registered protocol family 38
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 43 for MSI/MSI-X
>pcieport 0000:00:1c.4: setting latency timer to 64
>pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
>pcieport 0000:00:1c.6: setting latency timer to 64
>pcieport 0000:00:1c.6: irq 45 for MSI/MSI-X
>pcieport 0000:00:1c.7: setting latency timer to 64
>pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X
>pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
>pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
>pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
>pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
>pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
>pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
>pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
>pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
>pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>intel_idle: MWAIT substates: 0x1120
>intel_idle: v0.4 model 0x2A
>intel_idle: lapic_timer_reliable_states 0xffffffff
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ERST: Table is not found!
>GHES: HEST is not enabled!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 65536K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>loop: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfe725000 port 0xfe725100 irq 47
>ata2: SATA max UDMA/133 abar m2048@0xfe725000 port 0xfe725180 irq 47
>ata3: SATA max UDMA/133 abar m2048@0xfe725000 port 0xfe725200 irq 47
>ata4: SATA max UDMA/133 abar m2048@0xfe725000 port 0xfe725280 irq 47
>ata5: SATA max UDMA/133 abar m2048@0xfe725000 port 0xfe725300 irq 47
>ata6: DUMMY
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe727000
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.2.10-2.2.fc16.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe726000
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 3.2.10-2.2.fc16.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>xhci_hcd 0000:02:00.0: setting latency timer to 64
>xhci_hcd 0000:02:00.0: xHCI Host Controller
>xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
>xhci_hcd 0000:02:00.0: irq 16, io mem 0xfe500000
>xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 52 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 53 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 54 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 55 for MSI/MSI-X
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: xHCI Host Controller
>usb usb3: Manufacturer: Linux 3.2.10-2.2.fc16.x86_64 xhci_hcd
>usb usb3: SerialNumber: 0000:02:00.0
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>xhci_hcd 0000:02:00.0: xHCI Host Controller
>xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: xHCI Host Controller
>usb usb4: Manufacturer: Linux 3.2.10-2.2.fc16.x86_64 xhci_hcd
>usb usb4: SerialNumber: 0000:02:00.0
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usbcore: registered new interface driver usbserial
>USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>usbserial: USB Serial Driver core
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>Mobile IPv6
>NET: Registered protocol family 17
>Registering the dns_resolver key type
>registered taskstats version 1
>  Magic number: 4:57:298
>rtc_cmos 00:06: setting system clock to 2012-03-15 21:17:02 UTC (1331846222)
>Initializing network drop monitor service
>ata5: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata4.00: ATA-8: ST2000NM0011, SN02, max UDMA/133
>ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>ata4.00: configured for UDMA/133
>ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ATA-8: ST2000NM0011, SN02, max UDMA/133
>ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST2000NM0011     SN02 PQ: 0 ANSI: 5
>ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata2.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>ata3.00: ATA-8: WDC WD2003FYYS-02W0B0, 01.01D01, max UDMA/133
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>ata2.00: configured for UDMA/133
>ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD2002FAEX-0 05.0 PQ: 0 ANSI: 5
>ata3.00: configured for UDMA/133
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD2003FYYS-0 01.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>usb 1-1: new high-speed USB device number 2 using ehci_hcd
>sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>scsi 3:0:0:0: Direct-Access     ATA      ST2000NM0011     SN02 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
> sdd: sdd1 sdd2 sdd3
>sd 3:0:0:0: [sdd] Attached SCSI disk
> sdc: sdc1 sdc2 sdc3
>sd 2:0:0:0: [sdc] Attached SCSI disk
> sdb: sdb1 sdb2 sdb3
>sd 1:0:0:0: [sdb] Attached SCSI disk
>Freeing unused kernel memory: 1596k freed
>Write protecting the kernel read-only data: 10240k
>Freeing unused kernel memory: 40k freed
>Freeing unused kernel memory: 1544k freed
>dracut: dracut-013-20.fc16
>dracut: rd.luks=0: removing cryptoluks activation
>udevd[144]: starting version 173
>usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>usb 2-1: new high-speed USB device number 2 using ehci_hcd
>i915 0000:00:02.0: irq 56 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
>usb 1-1.3: New USB device found, idVendor=0e8f, idProduct=0016
>usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.3: Product: USB Hub
>usb 1-1.3: Manufacturer: GASIA Semi.
>hub 1-1.3:1.0: USB hub found
>hub 1-1.3:1.0: 4 ports detected
>Refined TSC clocksource calibration: 3392.293 MHz.
>usb 1-1.4: new high-speed USB device number 4 using ehci_hcd
>fbcon: inteldrmfb (fb0) is primary device
>usb 1-1.4: New USB device found, idVendor=04a9, idProduct=2213
>usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.4: Product: CanoScan
>usb 1-1.4: Manufacturer: Canon
>usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
>Console: switching to colour frame buffer device 240x67
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>No ACPI video bus found
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>dracut: Starting plymouth daemon
>usb 2-1.4: New USB device found, idVendor=0bda, idProduct=0181
>usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-1.4: Product: USB2.0-CRW
>usb 2-1.4: Manufacturer: Generic
>usb 2-1.4: SerialNumber: 20060413092100000
>Initializing USB Mass Storage driver...
>scsi6 : usb-storage 2-1.4:1.0
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb 1-1.3.1: new full-speed USB device number 5 using ehci_hcd
>usb 1-1.3.1: not running at top speed; connect to a high speed hub
>dracut: rd.dm=0: removing DM RAID activation
>wmi: Mapper loaded
>mdadm: sending ioctl 800c0910 to a partition!
>mdadm: sending ioctl 800c0910 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>usb 1-1.3.1: New USB device found, idVendor=046d, idProduct=0809
>usb 1-1.3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
>usb 1-1.3.1: SerialNumber: E47C62A3
>mdadm: sending ioctl 800c0910 to a partition!
>mdadm: sending ioctl 800c0910 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 800c0910 to a partition!
>mdadm: sending ioctl 800c0910 to a partition!
>md: bind<sdc3>
>md: bind<sdc1>
>md: bind<sdc2>
>md: bind<sdb1>
>md: bind<sdb3>
>md: bind<sdb2>
>md: bind<sda3>
>md: bind<sda2>
>usb 1-1.3.2: new full-speed USB device number 6 using ehci_hcd
>md: bind<sdd1>
>md: bind<sdd2>
>md: raid10 personality registered for level 10
>bio: create slab <bio-1> at 1
>md/raid10:md1: active with 4 out of 4 devices
>created bitmap (1 pages) for device md1
>md1: bitmap initialized from disk: read 1/1 pages, set 0 of 469 bits
>md1: detected capacity change from 0 to 31454134272
>md: bind<sdd3>
> md1: unknown partition table
>md/raid10:md2: active with 4 out of 4 devices
>created bitmap (29 pages) for device md2
>md2: bitmap initialized from disk: read 2/2 pages, set 0 of 59132 bits
>md2: detected capacity change from 0 to 3968227868672
> md2: unknown partition table
>md: bind<sda1>
>usb 1-1.3.2: New USB device found, idVendor=051d, idProduct=0002
>usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1.3.2: Product: Back-UPS BR1200GI FW:877.L2 .I USB FW:L2
>usb 1-1.3.2: Manufacturer: American Power Conversion
>usb 1-1.3.2: SerialNumber: 3B1040X42713
>md: raid1 personality registered for level 1
>md/raid1:md0: active with 4 out of 4 mirrors
>md0: detected capacity change from 0 to 524275712
> md0: unknown partition table
>generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BR1200GI FW:877.L2 .I USB FW:L2 ] on usb-0000:00:1a.0-1.3.2/input0
>usb 1-1.3.3: new low-speed USB device number 7 using ehci_hcd
>usb 1-1.3.3: New USB device found, idVendor=046d, idProduct=c045
>usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.3.3: Product: USB-PS/2 Optical Mouse
>usb 1-1.3.3: Manufacturer: Logitech
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/input/input2
>generic-usb 0003:046D:C045.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.3.3/input0
>usb 1-1.3.4: new low-speed USB device number 8 using ehci_hcd
>usb 1-1.3.4: New USB device found, idVendor=0603, idProduct=00f2
>usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.3.4: Product: USB Keyboard
>usb 1-1.3.4: Manufacturer: NOVATEK
>input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.0/input/input3
>generic-usb 0003:0603:00F2.0003: input,hidraw2: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1a.0-1.3.4/input0
>input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.1/input/input4
>generic-usb 0003:0603:00F2.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1a.0-1.3.4/input1
>EXT4-fs (md1): barriers disabled
>EXT4-fs (md1): mounted filesystem with writeback data mode. Opts: (null)
>dracut: Checking ext4: /dev/disk/by-uuid/b935b5db-0051-4f7f-83ac-6a6651fe0988
>dracut: issuing e2fsck -a   /dev/disk/by-uuid/b935b5db-0051-4f7f-83ac-6a6651fe0988
>scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
>scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
>scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
>scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro/HG     1.00 PQ: 0 ANSI: 0 CCS
>scsi 6:0:0:4: Direct-Access     Generic- SD/MMC/MS/MSPRO  1.00 PQ: 0 ANSI: 0 CCS
>sd 6:0:0:0: Attached scsi generic sg4 type 0
>sd 6:0:0:1: Attached scsi generic sg5 type 0
>sd 6:0:0:2: Attached scsi generic sg6 type 0
>sd 6:0:0:3: Attached scsi generic sg7 type 0
>sd 6:0:0:4: Attached scsi generic sg8 type 0
>dracut: system: clean, 241293/1921360 files, 1859224/7679232 blocks
>dracut: Remounting /dev/disk/by-uuid/b935b5db-0051-4f7f-83ac-6a6651fe0988 with -o data=writeback,commit=30,barrier=0,delalloc,journal_async_commit,journal_checksum,inode_readahead_blks=128,noatime,nodiratime,noquota,nodiscard,acl,user_xattr,ro
>sd 6:0:0:0: [sde] Attached SCSI removable disk
>EXT4-fs (md1): barriers disabled
>EXT4-fs (md1): mounted filesystem with writeback data mode. Opts: data=writeback,commit=30,barrier=0,delalloc,journal_async_commit,journal_checksum,inode_readahead_blks=128,noquota,nodiscard,acl,user_xattr
>dracut: Mounted root filesystem /dev/md1
>sd 6:0:0:1: [sdf] Attached SCSI removable disk
>sd 6:0:0:4: [sdi] Attached SCSI removable disk
>sd 6:0:0:2: [sdg] Attached SCSI removable disk
>sd 6:0:0:3: [sdh] Attached SCSI removable disk
>dracut: Switching root
>systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
>systemd[1]: Set hostname to <srv-rhsoft.rhsoft.net>.
>systemd[1]: Netlink failure for request 2: Permission denied
>systemd[1]: Failed to configure loopback device: Permission denied
>udevd[618]: starting version 173
>EXT4-fs (md1): re-mounted. Opts: data=writeback,commit=30,barrier=0,delalloc,journal_async_commit,journal_checksum,inode_readahead_blks=128,noquota,nodiscard,acl,user_xattr
>WARNING! power/level is deprecated; use power/control instead
>mtp-probe[775]: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.1"
>mtp-probe[774]: checking bus 1, device 7: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.3"
>mtp-probe[771]: checking bus 1, device 8: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.4"
>mtp-probe[776]: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.2"
>mtp-probe[754]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4"
>mtp-probe[754]: bus: 2, device: 3 was not an MTP device
>mtp-probe[776]: bus: 1, device: 6 was not an MTP device
>mtp-probe[771]: bus: 1, device: 8 was not an MTP device
>mtp-probe[775]: bus: 1, device: 5 was not an MTP device
>mtp-probe[774]: bus: 1, device: 7 was not an MTP device
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>iTCO_vendor_support: vendor-support=0
>microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1b
>e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
>e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
>iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Linux media interface: v0.10
>Linux video capture interface: v2.00
>uvcvideo: Found UVC 1.00 device <unnamed> (046d:0809)
>cfg80211: Calling CRDA to update world regulatory domain
>input: UVC Camera (046d:0809) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input5
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (1.1.1)
>e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 3c:d9:2b:65:95:9f
>e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF
>e1000e 0000:01:00.0: Disabling ASPM L0s
>e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>e1000e 0000:01:00.0: setting latency timer to 64
>e1000e 0000:01:00.0: irq 58 for MSI/MSI-X
>e1000e 0000:01:00.0: irq 59 for MSI/MSI-X
>e1000e 0000:01:00.0: irq 60 for MSI/MSI-X
>ath9k 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ath9k 0000:03:00.0: setting latency timer to 64
>snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
>snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>microcode: CPU0 updated to revision 0x25, date = 2011-10-11
>microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1b
>e1000e 0000:01:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1b:21:c6:91:e4
>e1000e 0000:01:00.0: eth1: Intel(R) PRO/1000 Network Connection
>e1000e 0000:01:00.0: eth1: MAC: 3, PHY: 8, PBA No: G17304-004
>microcode: CPU1 updated to revision 0x25, date = 2011-10-11
>microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x1b
>microcode: CPU2 updated to revision 0x25, date = 2011-10-11
>microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x1b
>microcode: CPU3 updated to revision 0x25, date = 2011-10-11
>microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x1b
>microcode: CPU4 updated to revision 0x25, date = 2011-10-11
>microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x1b
>microcode: CPU5 updated to revision 0x25, date = 2011-10-11
>microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x1b
>microcode: CPU6 updated to revision 0x25, date = 2011-10-11
>microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x1b
>microcode: CPU7 updated to revision 0x25, date = 2011-10-11
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>ath: EEPROM regdomain: 0x30
>ath: EEPROM indicates we should expect a direct regpair map
>ath: Country alpha2 being used: AM
>ath: Regpair used: 0x30
>input: HP WMI hotkeys as /devices/virtual/input/input6
>cfg80211: World regulatory domain updated:
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
>Registered led device: ath9k-phy0
>ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffc90012920000, irq=16
>cfg80211: Calling CRDA for country: AM
>cfg80211: Regulatory domain changed to country: AM
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
>cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
>ALSA sound/usb/mixer.c:846 5:2: cannot get min/max values for control 2 (id 5)
>usbcore: registered new interface driver snd-usb-audio
>scsi_verify_blk_ioctl: 1014 callbacks suppressed
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>mdadm: sending ioctl 1261 to a partition!
>cfg80211: Calling CRDA for country: AT
>cfg80211: Regulatory domain changed to country: AT
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>ALSA sound/pci/hda/patch_realtek.c:1275 SKU: Nid=0x1d sku_cfg=0x40028101
>ALSA sound/pci/hda/patch_realtek.c:1277 SKU: port_connectivity=0x1
>ALSA sound/pci/hda/patch_realtek.c:1278 SKU: enable_pcbeep=0x0
>ALSA sound/pci/hda/patch_realtek.c:1279 SKU: check_sum=0x00000002
>ALSA sound/pci/hda/patch_realtek.c:1280 SKU: customization=0x00000081
>ALSA sound/pci/hda/patch_realtek.c:1281 SKU: external_amp=0x0
>ALSA sound/pci/hda/patch_realtek.c:1282 SKU: platform_type=0x0
>ALSA sound/pci/hda/patch_realtek.c:1283 SKU: swap=0x0
>ALSA sound/pci/hda/patch_realtek.c:1284 SKU: override=0x1
>ALSA sound/pci/hda/hda_codec.c:4955 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>ALSA sound/pci/hda/hda_codec.c:4959    speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4963    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4964    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:4968    inputs:
>ALSA sound/pci/hda/hda_codec.c:4972  Mic=0x19
>ALSA sound/pci/hda/hda_codec.c:4972  Line=0x18
>ALSA sound/pci/hda/hda_codec.c:4974
>ALSA sound/pci/hda/patch_realtek.c:1338 realtek: No valid SSID, checking pincfg 0x40028101 for NID 0x1d
>ALSA sound/pci/hda/patch_realtek.c:1354 realtek: Enabling init ASM_ID=0x8101 CODEC_ID=10ec0662
>ALSA sound/usb/mixer.c:810 set resolution quirk: cval->res = 384
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI: detected monitor BenQ V2200Eco at connection type HDMI
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
>HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
>HDMI: detected monitor BenQ V2200Eco at connection type HDMI
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
>input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
>input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
>HDMI: detected monitor BenQ V2200Eco at connection type HDMI
>HDMI: available speakers: FL/FR
>HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
>systemd-fsck[957]: boot: sauber, 268/128016 Dateien, 73397/511988 Bl\xffffffc3\xffffffb6\xffffffb6cke
>EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: noacl,nouser_xattr,noquota
>systemd-fsck[1107]: data: sauber, 714844/242204672 Dateien, 408041063/968805632 Bl\xffffffc3\xffffffb6\xffffffb6cke
>EXT4-fs (md2): barriers disabled
>EXT4-fs (md2): mounted filesystem with writeback data mode. Opts: data=writeback,commit=30,barrier=0,delalloc,journal_async_commit,journal_checksum,inode_readahead_blks=128,noquota,nodiscard,acl,user_xattr
>Adding 2097148k swap on /mnt/data/.2048Mb.swap.  Priority:0 extents:36 across:680484860k
>smartd[1157]: smartd 5.42 2011-10-20 r3458 [x86_64-linux-3.2.10-2.2.fc16.x86_64] (local build)
>smartd[1157]: Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>smartd[1157]: Opened configuration file /etc/smartd.conf
>smartd[1157]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
>smartd[1157]: Device: /dev/sda, type changed from 'scsi' to 'sat'
>smartd[1157]: Device: /dev/sda [SAT], opened
>smartd[1157]: Device: /dev/sda [SAT], ST2000NM0011, S/N:Z1P099YL, WWN:5-000c50-035f56f7c, FW:SN02, 2.00 TB
>smartd[1157]: Device: /dev/sda [SAT], not found in smartd database.
>pure-config.pl[1167]: Running: /usr/sbin/pure-ftpd --daemonize -b -c100 -C50 -E -fnone -A -lmysql:/etc/pure-ftpd/pureftpd-mysql.conf -H -I15 -L10000:20 -i -m4 -U117:007 -u500 -1 -Oclf:/var/log/pure-ftpd.log -j -g/var/run/pure-ftpd.pid -k90 -Z -y10:20 -0 -Y0 -4 -8utf8 -9latin1 -p10000:10100
>pure-config.pl[1167]: /usr/sbin/pure-ftpd: invalid option -- 'Y'
>/usr/sbin/crond[1169]: (CRON) INFO (running with inotify support)
>vnstatd[1177]: Monitoring: wlan0 br0 eth1 tap0 eth0
>vnstatd[1177]: Error: Unable to get interface "br0" statistics.
>vnstatd[1177]: Interface "br0" not available, disabling.
>vnstatd[1177]: Error: Unable to get interface "tap0" statistics.
>vnstatd[1177]: Interface "tap0" not available, disabling.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ntpd[1181]: ntpd 4.2.6p4@1.2324-o Thu Oct  6 15:37:57 UTC 2011 (1)
>ntpd[1181]: proto: precision = 0.558 usec
>ntpd[1181]: 0.0.0.0 c01d 0d kern kernel time sync enabled
>ntpd[1181]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
>ntpd[1181]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
>ntpd[1181]: Listen and drop on 1 v6wildcard :: UDP 123
>ntpd[1181]: Listen normally on 2 lo 127.0.0.1 UDP 123
>ntpd[1181]: peers refreshed
>ntpd[1181]: Listening on routing socket on fd #19 for interface updates
>smartd[1157]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
>smartd[1157]: Device: /dev/sdb, type changed from 'scsi' to 'sat'
>smartd[1157]: Device: /dev/sdb [SAT], opened
>smartd[1157]: Device: /dev/sdb [SAT], WDC WD2002FAEX-007BA0, S/N:WD-WMAY02135582, WWN:5-0014ee-6011efb48, FW:05.01D05, 2.00 TB
>mpdscribble[1193]: mpd error (5): Connection refused
>smartd[1157]: Device: /dev/sdb [SAT], found in smartd database: Western Digital Caviar Black
>smokeping[1175]: Subroutine SNMP_Session::pack_sockaddr_in6 redefined at /usr/share/perl5/Exporter.pm line 67.
>smokeping[1175]: at /usr/share/perl5/vendor_perl/SNMP_Session.pm line 149
>smokeping[1175]: Subroutine SNMP_Session::unpack_sockaddr_in6 redefined at /usr/share/perl5/Exporter.pm line 67.
>smokeping[1175]: at /usr/share/perl5/vendor_perl/SNMP_Session.pm line 149
>smokeping[1175]: Subroutine SNMP_Session::sockaddr_in6 redefined at /usr/share/perl5/Exporter.pm line 67.
>smokeping[1175]: at /usr/share/perl5/vendor_perl/SNMP_Session.pm line 149
>smokeping[1175]: Subroutine SNMPv1_Session::pack_sockaddr_in6 redefined at /usr/share/perl5/Exporter.pm line 67.
>smokeping[1175]: at /usr/share/perl5/vendor_perl/SNMP_Session.pm line 604
>smokeping[1175]: Subroutine SNMPv1_Session::unpack_sockaddr_in6 redefined at /usr/share/perl5/Exporter.pm line 67.
>smokeping[1175]: at /usr/share/perl5/vendor_perl/SNMP_Session.pm line 604
>smokeping[1175]: Subroutine SNMPv1_Session::sockaddr_in6 redefined at /usr/share/perl5/Exporter.pm line 67.
>smokeping[1175]: at /usr/share/perl5/vendor_perl/SNMP_Session.pm line 604
>avahi-daemon[1197]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
>avahi-daemon[1197]: Successfully dropped root privileges.
>avahi-daemon[1197]: avahi-daemon 0.6.30 starting up.
>iptables.init[1154]: iptables: Firewall-Regeln anwenden: [  OK  ]
>iptables.init[1154]: iptables: Zus\xffffffc3\xffffffa4\xffffffa4tzliche Module laden: nf_conntrack_ftp nf_nat_ftp [  OK  ]
>smartd[1157]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list.
>smartd[1157]: Device: /dev/sdc, type changed from 'scsi' to 'sat'
>smartd[1157]: Device: /dev/sdc [SAT], opened
>smartd[1157]: Device: /dev/sdc [SAT], WDC WD2003FYYS-02W0B0, S/N:WD-WMAY02826949, WWN:5-0014ee-656cec545, FW:01.01D01, 2.00 TB
>smartd[1157]: Device: /dev/sdc [SAT], found in smartd database: Western Digital RE4 Serial ATA
>smartd[1157]: Device: /dev/sdc [SAT], is SMART capable. Adding to "monitor" list.
>smartd[1157]: Device: /dev/sdd, type changed from 'scsi' to 'sat'
>smartd[1157]: Device: /dev/sdd [SAT], opened
>smartd[1157]: Device: /dev/sdd [SAT], ST2000NM0011, S/N:Z1P07H6T, WWN:5-000c50-035db3f91, FW:SN02, 2.00 TB
>smartd[1157]: Device: /dev/sdd [SAT], not found in smartd database.
>smartd[1157]: Device: /dev/sdd [SAT], is SMART capable. Adding to "monitor" list.
>smartd[1157]: Monitoring 4 ATA and 0 SCSI devices
>rtkit-daemon[1211]: Successfully called chroot.
>rtkit-daemon[1211]: Successfully dropped privileges.
>rtkit-daemon[1211]: Successfully limited resources.
>rtkit-daemon[1211]: Running.
>rtkit-daemon[1211]: Canary thread running.
>rtkit-daemon[1211]: Watchdog thread running.
>systemd-logind[1192]: New seat seat0.
>avahi-daemon[1197]: Successfully called chroot().
>avahi-daemon[1197]: Successfully dropped remaining capabilities.
>e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 57 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>device eth0 entered promiscuous mode
>fuse init (API version 7.17)
>Bridge firewalling registered
>br0: port 1(eth0) entering forwarding state
>br0: port 1(eth0) entering forwarding state
>device wlan0 entered promiscuous mode
>br0: port 2(wlan0) entering forwarding state
>br0: port 2(wlan0) entering forwarding state
>e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>br0: port 1(eth0) entering forwarding state
>br0: port 2(wlan0) entering forwarding state
>/dev/vmmon[3313]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[3313]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3313]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
>/dev/vmmon[3313]: Module vmmon: initialized
>[3321]: VMCI: shared components initialized.
>[3321]: VMCI: host components initialized.
>[3321]: VMCI: Module registered (name=vmci,major=10,minor=58).
>[3321]: VMCI: Using host personality
>[3321]: VMCI: Module (name=vmci) is initialized
>/dev/vmnet: open called by PID 3379 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 3381 (vmnet-bridge)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>bridge-eth1: up
>bridge-eth1: attached
>/dev/vmnet: open called by PID 3387 (vmnet-natd)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>userif-2: sent link down event.
>userif-2: sent link up event.
>/dev/vmnet: open called by PID 3388 (vmnet-netifup)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmmon[3706]: PTSC: initialized at 3392293000 Hz using TSC, TSCs are synchronized.
>/dev/vmmon[3706]: Monitor IPI vector: 0
>/dev/vmnet: open called by PID 5542 (vmx-vcpu-0)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 5542 (vmx-vcpu-0)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 5542 (vmx-vcpu-0)
>device eth1 entered promiscuous mode
>bridge-eth1: enabled promiscuous mode
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 5741 (vmx-vcpu-0)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 5741 (vmx-vcpu-0)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 5741 (vmx-vcpu-0)
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 5832 (vmx-vcpu-0)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 5832 (vmx-vcpu-0)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 5896 (vmx-vcpu-0)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 5896 (vmx-vcpu-0)
>/dev/vmnet: port on hub 8 successfully opened
>wlan0: moving STA 90:21:55:e4:a5:0a to state 1
>wlan0: moving STA 90:21:55:e4:a5:0a to state 2
>wlan0: moving STA 90:21:55:e4:a5:0a to state 3

Actions: View

Attachments on bug 800520: 570315 | 570316 | 570352 | 570353 | 915425