Attachment 915899 Details for Bug 1096491 – Comment

Comment

comment_7078194.txt (text/plain), 95.38 KB, created by Dr. Amihai Silverman on 2014-05-11 06:48:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dr. Amihai Silverman

Created: 2014-05-11 06:48:26 UTC

Size: 95.38 KB

patch

obsolete

>Description of problem:
>
>The server crash with the following crash log:
>
>crash: page excluded: kernel virtual address: ffffffffffffffff  type: "cpu_present_map"
>crash: page excluded: kernel virtual address: ffffffffffffffff  type: "cpu_present_map"
>crash: page excluded: kernel virtual address: ffffffffffffffff  type: "cpu_online_map"
>      KERNEL: /usr/lib/debug/lib/modules/2.6.32-431.5.1.el6.x86_64/vmlinux
>    DUMPFILE: /var/crash/127.0.0.1-2014-05-11-05:22:53/vmcore  [PARTIAL DUMP]
>        CPUS: 24
>        DATE: Sun May 11 08:22:10 2014
>      UPTIME: 00:18:16
>LOAD AVERAGE: 0.82, 0.61, 0.43
>       TASKS: 1377
>    NODENAME: admin
>     RELEASE: 2.6.32-431.5.1.el6.x86_64
>     VERSION: #1 SMP Fri Jan 10 14:46:43 EST 2014
>     MACHINE: x86_64  (2533 Mhz)
>      MEMORY: 96 GB
>       PANIC: ""
>         PID: 3770
>     COMMAND: "nfsd"
>        TASK: ffff880c2b537500  [THREAD_INFO: ffff880c21ff2000]
>         CPU: 2
>       STATE: TASK_RUNNING (PANIC)
>
>
>Version-Release number of selected component (if applicable):
>
>nfs-utils-1.2.3-39.el6.x86_64
>
>How reproducible:
>
>It happens by itself every week or so.
>
>Steps to Reproduce:
>1.
>2.
>3.
>
>Actual results:
>
>After it happens, the server is down - has to be manually booted.
>
>Expected results:
>
>
>Additional info:
>
>crash> bt
>PID: 3770   TASK: ffff880c2b537500  CPU: 2   COMMAND: "nfsd"
> #0 [ffff880c21ff3ae0] machine_kexec at ffffffff81038f3b
> #1 [ffff880c21ff3b40] crash_kexec at ffffffff810c5d82
> #2 [ffff880c21ff3c10] oops_end at ffffffff8152b820
> #3 [ffff880c21ff3c40] die at ffffffff81010e0b
> #4 [ffff880c21ff3c70] do_general_protection at ffffffff8152b322
> #5 [ffff880c21ff3ca0] general_protection at ffffffff8152aaf5
>    [exception RIP: lru_put_end+32]
>    RIP: ffffffffa0620f90  RSP: ffff880c21ff3d50  RFLAGS: 00010282
>    RAX: dead000000200200  RBX: ffff880c239ac000  RCX: ffff880c239ac028
>    RDX: dead000000100100  RSI: ffff880bd77e45f8  RDI: ffff880bd77e4608
>    RBP: ffff880c21ff3d50   R8: ffff880bd77e4608   R9: 0000000000000000
>    R10: 0000000000000000  R11: 0000000000000006  R12: ffff880bd77e45f8
>    R13: 0000000000000000  R14: ffff880bd77e45f8  R15: 0000000000000001
>    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
> #6 [ffff880c21ff3d58] nfsd_cache_lookup at ffffffffa06214a6 [nfsd]
> #7 [ffff880c21ff3dd8] nfsd_dispatch at ffffffffa06153e8 [nfsd]
> #8 [ffff880c21ff3e18] svc_process_common at ffffffffa050c844 [sunrpc]
> #9 [ffff880c21ff3e98] svc_process at ffffffffa050ce80 [sunrpc]
>#10 [ffff880c21ff3eb8] nfsd at ffffffffa0615b52 [nfsd]
>#11 [ffff880c21ff3ee8] kthread at ffffffff8109aee6
>#12 [ffff880c21ff3f48] kernel_thread at ffffffff8100c20a
>
>crash> vm
>PID: 3770   TASK: ffff880c2b537500  CPU: 2   COMMAND: "nfsd"
>       MM               PGD          RSS    TOTAL_VM
>       0                 0            0k       0k   
>
>crash> files
>PID: 3770   TASK: ffff880c2b537500  CPU: 2   COMMAND: "nfsd"
>ROOT: /    CWD: /
>No open files
>
>crash> log
>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.32-431.5.1.el6.x86_64 (mockbuild@x86-002.build.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Jan 10 14:46:43 EST 2014
>Command line: ro root=LABEL=sgiroot rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb console=tty0 console=ttyS1,115200n8
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000098c00 (usable)
> BIOS-e820: 0000000000098c00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bf760000 (usable)
> BIOS-e820: 00000000bf76e000 - 00000000bf770000 type 9
> BIOS-e820: 00000000bf770000 - 00000000bf77e000 (ACPI data)
> BIOS-e820: 00000000bf77e000 - 00000000bf7d0000 (ACPI NVS)
> BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
> BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000001840000000 (usable)
>DMI present.
>SMBIOS version 2.6 @ 0xFC380
>DMI: SGI.COM C2108-TY11/X8DAH, BIOS 1.1     03/16/2011
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x1840000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-DFFFF uncachable
>  E0000-E7FFF write-through
>  E8000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0000000000 mask F000000000 write-back
>  1 base 1000000000 mask F800000000 write-back
>  2 base 1800000000 mask FFC0000000 write-back
>  3 base 00C0000000 mask FFC0000000 uncachable
>  4 base 00BF800000 mask FFFF800000 uncachable
>  5 disabled
>  6 disabled
>  7 disabled
>  8 disabled
>  9 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 64GB, type WB
>reg 1, base: 64GB, range: 32GB, type WB
>reg 2, base: 96GB, range: 1GB, type WB
>reg 3, base: 3GB, range: 1GB, type UC
>reg 4, base: 3064MB, range: 8MB, type UC
>total RAM covered: 98296M
>Found optimal setting for mtrr clean up
> gran_size: 64K         chunk_size: 16M         num_reg: 9      lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3064MB, range: 8MB, type UC
>reg 3, base: 4GB, range: 4GB, type WB
>reg 4, base: 8GB, range: 8GB, type WB
>reg 5, base: 16GB, range: 16GB, type WB
>reg 6, base: 32GB, range: 32GB, type WB
>reg 7, base: 64GB, range: 32GB, type WB
>reg 8, base: 96GB, range: 1GB, type WB
>e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xbf760 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>Using GB pages for direct mapping
>init_memory_mapping: 0000000000000000-00000000bf760000
> 0000000000 - 0080000000 page 1G
> 0080000000 - 00bf600000 page 2M
> 00bf600000 - 00bf760000 page 4k
>kernel direct mapping tables up to bf760000 @ 10000-13000
>Use unified mapping for non-reserved e820 regions.
>init_memory_mapping: 0000000100000000-0000001840000000
> 0100000000 - 1840000000 page 1G
>kernel direct mapping tables up to 1840000000 @ 12000-13000
>RAMDISK: 36f55000 - 37fef57d
>ACPI: RSDP 00000000000fb240 00024 (v02 ACPIAM)
>ACPI: XSDT 00000000bf770100 00094 (v01 SMCI            20110316 MSFT 00000097)
>ACPI: FACP 00000000bf770290 000F4 (v04 S G I  FACP1450 20110316 MSFT 00000097)
>ACPI: DSDT 00000000bf770700 071F7 (v02  10100 10100000 00000000 INTL 20051117)
>ACPI: FACS 00000000bf77e000 00040
>ACPI: APIC 00000000bf770390 0012A (v02 S G I  APIC1450 20110316 MSFT 00000097)
>ACPI: MCFG 00000000bf7704c0 0003C (v01 S G I  OEMMCFG  20110316 MSFT 00000097)
>ACPI: SLIT 00000000bf770500 00030 (v01 S G I  OEMSLIT  20110316 MSFT 00000097)
>ACPI: SPMI 00000000bf770530 00041 (v05 S G I  OEMSPMI  20110316 MSFT 00000097)
>ACPI: OEMB 00000000bf77e040 00099 (v01 S G I  OEMB1450 20110316 MSFT 00000097)
>ACPI: SRAT 00000000bf77a700 00250 (v02 S G I  OEMSRAT  00000001 INTL 00000001)
>ACPI: HPET 00000000bf77a950 00038 (v01 S G I  OEMHPET  20110316 MSFT 00000097)
>ACPI: DMAR 00000000bf77e0e0 001E0 (v01    AMI  OEMDMAR 00000001 MSFT 00000097)
>ACPI: SSDT 00000000bf7846f0 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
>ACPI: EINJ 00000000bf77a990 00130 (v01  AMIER AMI_EINJ 20110316 MSFT 00000097)
>ACPI: BERT 00000000bf77ab20 00030 (v01  AMIER AMI_BERT 20110316 MSFT 00000097)
>ACPI: ERST 00000000bf77ab50 001B0 (v01  AMIER AMI_ERST 20110316 MSFT 00000097)
>ACPI: HEST 00000000bf77ad00 000A8 (v01  AMIER ABC_HEST 20110316 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
>Setting APIC routing to flat.
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 0 -> APIC 2 -> Node 0
>SRAT: PXM 0 -> APIC 4 -> Node 0
>SRAT: PXM 0 -> APIC 16 -> Node 0
>SRAT: PXM 0 -> APIC 18 -> Node 0
>SRAT: PXM 0 -> APIC 20 -> Node 0
>SRAT: PXM 0 -> APIC 1 -> Node 0
>SRAT: PXM 0 -> APIC 3 -> Node 0
>SRAT: PXM 0 -> APIC 5 -> Node 0
>SRAT: PXM 0 -> APIC 17 -> Node 0
>SRAT: PXM 0 -> APIC 19 -> Node 0
>SRAT: PXM 0 -> APIC 21 -> Node 0
>SRAT: PXM 1 -> APIC 32 -> Node 1
>SRAT: PXM 1 -> APIC 34 -> Node 1
>SRAT: PXM 1 -> APIC 36 -> Node 1
>SRAT: PXM 1 -> APIC 48 -> Node 1
>SRAT: PXM 1 -> APIC 50 -> Node 1
>SRAT: PXM 1 -> APIC 52 -> Node 1
>SRAT: PXM 1 -> APIC 33 -> Node 1
>SRAT: PXM 1 -> APIC 35 -> Node 1
>SRAT: PXM 1 -> APIC 37 -> Node 1
>SRAT: PXM 1 -> APIC 49 -> Node 1
>SRAT: PXM 1 -> APIC 51 -> Node 1
>SRAT: PXM 1 -> APIC 53 -> Node 1
>SRAT: Node 0 PXM 0 0-a0000
>SRAT: Node 0 PXM 0 100000-c0000000
>SRAT: Node 0 PXM 0 100000000-c40000000
>SRAT: Node 1 PXM 1 c40000000-1840000000
>NUMA: Allocated memnodemap from 12040 - 42880
>NUMA: Using 20 for the hash shift.
>Bootmem setup node 0 0000000000000000-0000000c40000000
>  NODE_DATA [0000000000042880 - 000000000007687f]
>  bootmap [0000000000100000 -  0000000000287fff] pages 188
>(9 early reservations) ==> bootmem [0000000000 - 0c40000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 000201faa4]    TEXT DATA BSS ==> [0001000000 - 000201faa4]
>  #3 [0036f55000 - 0037fef57d]          RAMDISK ==> [0036f55000 - 0037fef57d]
>  #4 [0000098c00 - 0000100000]    BIOS reserved ==> [0000098c00 - 0000100000]
>  #5 [0002020000 - 0002020245]              BRK ==> [0002020000 - 0002020245]
>  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
>  #7 [0000012000 - 0000012030]        ACPI SLIT ==> [0000012000 - 0000012030]
>  #8 [0000012040 - 0000042880]       MEMNODEMAP ==> [0000012040 - 0000042880]
>Bootmem setup node 1 0000000c40000000-0000001840000000
>  NODE_DATA [0000000c40000040 - 0000000c4003403f]
>  bootmap [0000000c40035000 -  0000000c401b4fff] pages 180
>(9 early reservations) ==> bootmem [0c40000000 - 1840000000]
>  #0 [0000000000 - 0000001000]   BIOS data page
>  #1 [0000006000 - 0000008000]       TRAMPOLINE
>  #2 [0001000000 - 000201faa4]    TEXT DATA BSS
>  #3 [0036f55000 - 0037fef57d]          RAMDISK
>  #4 [0000098c00 - 0000100000]    BIOS reserved
>  #5 [0002020000 - 0002020245]              BRK
>  #6 [0000010000 - 0000012000]          PGTABLE
>  #7 [0000012000 - 0000012030]        ACPI SLIT
>  #8 [0000012040 - 0000042880]       MEMNODEMAP
>found SMP MP-table at [ffff8800000ff780] ff780
>Reserving 135MB of memory at 48MB for crashkernel (System RAM: 99328MB)
> [ffffea0000000000-ffffea000f5fffff] PMD -> [ffff880028600000-ffff880036dfffff] on node 0
> [ffffea000f600000-ffffea002adfffff] PMD -> [ffff880038000000-ffff8800537fffff] on node 0
> [ffffea002ae00000-ffffea003fffffff] PMD -> [ffff880c40200000-ffff880c553fffff] on node 1
> [ffffea0040000000-ffffea0054dfffff] PMD -> [ffff880c55600000-ffff880c6a3fffff] on node 1
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x01840000
>Movable zone start PFN for each node
>early_node_map[4] active PFN ranges
>    0: 0x00000010 -> 0x00000098
>    0: 0x00000100 -> 0x000bf760
>    0: 0x00100000 -> 0x00c40000
>    1: 0x00c40000 -> 0x01840000
>On node 0 totalpages: 12580584
>  DMA zone: 56 pages used for memmap
>  DMA zone: 156 pages reserved
>  DMA zone: 3764 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 765848 pages, LIFO batch:31
>  Normal zone: 161280 pages used for memmap
>  Normal zone: 11635200 pages, LIFO batch:31
>On node 1 totalpages: 12582912
>  Normal zone: 172032 pages used for memmap
>  Normal zone: 12410880 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>Setting APIC routing to flat.
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled)
>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled)
>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled)
>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled)
>ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled)
>ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled)
>ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled)
>ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled)
>ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled)
>ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled)
>ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
>ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled)
>ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled)
>ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
>IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
>ACPI: IOAPIC (id[0x08] address[0xfec9a000] gsi_base[48])
>IOAPIC[2]: apic_id 8, version 32, address 0xfec9a000, GSI 48-71
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>SMP: Allowing 24 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 72
>PM: Registered nosave memory: 0000000000098000 - 0000000000099000
>PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>PM: Registered nosave memory: 00000000bf760000 - 00000000bf76e000
>PM: Registered nosave memory: 00000000bf76e000 - 00000000bf770000
>PM: Registered nosave memory: 00000000bf770000 - 00000000bf77e000
>PM: Registered nosave memory: 00000000bf77e000 - 00000000bf7d0000
>PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
>PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ec000
>PM: Registered nosave memory: 00000000bf7ec000 - 00000000c0000000
>PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
>PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
>Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
>Booting paravirtualized kernel on bare hardware
>NR_CPUS:4096 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:2
>PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u131072
>pcpu-alloc: s94872 r8192 d23912 u131072 alloc=1*2097152
>pcpu-alloc: [0] 00 01 02 03 04 05 12 13 14 15 16 17 -- -- -- -- 
>pcpu-alloc: [1] 06 07 08 09 10 11 18 19 20 21 22 23 -- -- -- -- 
>Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 24815692
>Policy zone: Normal
>Kernel command line: ro root=LABEL=sgiroot rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=135M@0M rhgb console=tty0 console=ttyS1,115200n8
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 99035848k/101711872k available (5326k kernel code, 1057888k absent, 1618136k reserved, 7013k data, 1276k init)
>Hierarchical RCU implementation.
>NR_IRQS:33024 nr_irqs:1416
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>console [ttyS1] enabled
>allocated 402653184 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2533.301 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.60 BogoMIPS (lpj=2533301)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
>Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>Initializing cgroup subsys perf_event
>Initializing cgroup subsys net_prio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 9 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>ACPI: Core revision 20090903
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 21773 entries in 86 pages
>dmar: Host address width 40
>dmar: DRHD base: 0x000000f89fe000 flags: 0x0
>dmar: IOMMU 0: reg_base_addr f89fe000 ver 1:0 cap c90780106f0462 ecap f020fe
>dmar: DRHD base: 0x000000fbffe000 flags: 0x1
>dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020f6
>dmar: RMRR base: 0x000000000e4000 end: 0x000000000e7fff
>dmar: RMRR base: 0x000000bf7ec000 end: 0x000000bf7fffff
>dmar: ATSR flags: 0x0
>APIC routing finalized to physical flat.
>  alloc irq_desc for 20 on node 0
>  alloc kstat_irqs on node 0
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Xeon(R) CPU           E5649  @ 2.53GHz stepping 02
>Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
>CPUID marked event: 'bus cycles' unavailable
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>NMI watchdog enabled, takes one hw-pmu counter.
>Booting Node   0, Processors  #1 #2 #3 #4 #5 Ok.
>Booting Node   1, Processors  #6 #7 #8 #9 #10 #11 Ok.
>Booting Node   0, Processors  #12 #13 #14 #15 #16 #17 Ok.
>Booting Node   1, Processors  #18 #19 #20 #21 #22 #23 Ok.
>Brought up 24 CPUs
>Total of 24 processors activated (121597.80 BogoMIPS).
>sizeof(vma)=200 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=592 bytes
>sizeof(dentry)=192 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2648 bytes
>devtmpfs: initialized
>PM: Registering ACPI NVS region at bf77e000 (335872 bytes)
>regulator: core version 0.5
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1018)
>\_SB_:_OSC evaluation returned wrong type
>_OSC request data:1 1f 
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI Warning: Incorrect checksum in table [OEMB] - 40, should be 3D (20090903/tbutils-314)
>ACPI: No dock devices found.
>HEST: Table parsing has been initialized.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af]
>pci_root PNP0A08:00: host bridge window [io  0x03e0-0x03ff]
>pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03bb]
>pci_root PNP0A08:00: host bridge window [io  0x03c0-0x03df]
>pci_root PNP0A08:00: host bridge window [io  0x0400-0x041f]
>pci_root PNP0A08:00: host bridge window [io  0x164e-0x164f]
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xefff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
>pci_root PNP0A08:00: host bridge window [mem 0xf9000000-0xfbffffff]
>pci_root PNP0A08:00: host bridge window expanded to [io  0x0d00-0xefff]; [io  0x0d00-0xefff] ignored
>pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d4bff])
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
>pci_bus 0000:00: root bus resource [io  0x03e0-0x03ff]
>pci_bus 0000:00: root bus resource [io  0x03b0-0x03bb]
>pci_bus 0000:00: root bus resource [io  0x03c0-0x03df]
>pci_bus 0000:00: root bus resource [io  0x0400-0x041f]
>pci_bus 0000:00: root bus resource [io  0x0d00-0xefff]
>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: root bus resource [mem 0xf9000000-0xfbffffff]
>pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:00.0: PME# disabled
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.0: PME# disabled
>pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:07.0: PME# disabled
>pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:09.0: PME# disabled
>pci 0000:00:13.0: reg 10: [mem 0xfec8a000-0xfec8afff]
>pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:13.0: PME# disabled
>pci 0000:00:16.0: reg 10: [mem 0xfa6f8000-0xfa6fbfff 64bit]
>pci 0000:00:16.1: reg 10: [mem 0xfa6f4000-0xfa6f7fff 64bit]
>pci 0000:00:16.2: reg 10: [mem 0xfa6f0000-0xfa6f3fff 64bit]
>pci 0000:00:16.3: reg 10: [mem 0xfa6ec000-0xfa6effff 64bit]
>pci 0000:00:16.4: reg 10: [mem 0xfa6e8000-0xfa6ebfff 64bit]
>pci 0000:00:16.5: reg 10: [mem 0xfa6e4000-0xfa6e7fff 64bit]
>pci 0000:00:16.6: reg 10: [mem 0xfa6e0000-0xfa6e3fff 64bit]
>pci 0000:00:16.7: reg 10: [mem 0xfa6dc000-0xfa6dffff 64bit]
>pci 0000:00:1a.0: reg 20: [io  0x9f80-0x9f9f]
>pci 0000:00:1a.1: reg 20: [io  0x9f40-0x9f5f]
>pci 0000:00:1a.2: reg 20: [io  0x9f20-0x9f3f]
>pci 0000:00:1a.7: reg 10: [mem 0xfa6fc000-0xfa6fc3ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0x9f00-0x9f1f]
>pci 0000:00:1d.1: reg 20: [io  0x9ec0-0x9edf]
>pci 0000:00:1d.2: reg 20: [io  0x9ea0-0x9ebf]
>pci 0000:00:1d.7: reg 10: [mem 0xfa6da000-0xfa6da3ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: no compatible bridge window for [io  0x0800-0x087f]
>pci 0000:00:1f.0: no compatible bridge window for [io  0x0500-0x053f]
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 03e8 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1640 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f)
>pci 0000:00:1f.2: reg 10: [io  0x9ff0-0x9ff7]
>pci 0000:00:1f.2: reg 14: [io  0x9fac-0x9faf]
>pci 0000:00:1f.2: reg 18: [io  0x9fe0-0x9fe7]
>pci 0000:00:1f.2: reg 1c: [io  0x9fa8-0x9fab]
>pci 0000:00:1f.2: reg 20: [io  0x9e80-0x9e9f]
>pci 0000:00:1f.2: reg 24: [mem 0xfa6d8000-0xfa6d87ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10: [mem 0xfa6d2000-0xfa6d20ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
>pci 0000:01:00.0: reg 10: [mem 0xfa8e0000-0xfa8fffff]
>pci 0000:01:00.0: reg 14: [mem 0xfa8c0000-0xfa8dffff]
>pci 0000:01:00.0: reg 18: [io  0xbf80-0xbf9f]
>pci 0000:01:00.0: reg 1c: [mem 0xfa89c000-0xfa89ffff]
>pci 0000:01:00.0: reg 30: [mem 0xfa8a0000-0xfa8bffff pref]
>pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>pci 0000:01:00.0: reg 184: [mem 0xfa860000-0xfa863fff 64bit]
>pci 0000:01:00.0: reg 190: [mem 0xfa840000-0xfa843fff 64bit]
>pci 0000:01:00.1: reg 10: [mem 0xfa820000-0xfa83ffff]
>pci 0000:01:00.1: reg 14: [mem 0xfa800000-0xfa81ffff]
>pci 0000:01:00.1: reg 18: [io  0xbf40-0xbf5f]
>pci 0000:01:00.1: reg 1c: [mem 0xfa898000-0xfa89bfff]
>pci 0000:01:00.1: reg 30: [mem 0xfa7e0000-0xfa7fffff pref]
>pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
>pci 0000:01:00.1: PME# disabled
>pci 0000:01:00.1: reg 184: [mem 0xfa7c0000-0xfa7c3fff 64bit]
>pci 0000:01:00.1: reg 190: [mem 0xfa7a0000-0xfa7a3fff 64bit]
>pci 0000:00:01.0: PCI bridge to [bus 01-02]
>pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:01.0:   bridge window [mem 0xfa700000-0xfa8fffff]
>pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:03.0: PCI bridge to [bus 03-03]
>pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:04:00.0: reg 10: [io  0xc800-0xc8ff]
>pci 0000:04:00.0: reg 14: [mem 0xfa9ec000-0xfa9effff 64bit]
>pci 0000:04:00.0: reg 1c: [mem 0xfa9f0000-0xfa9fffff 64bit]
>pci 0000:04:00.0: reg 30: [mem 0xfaa00000-0xfabfffff pref]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:07.0: PCI bridge to [bus 04-04]
>pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:07.0:   bridge window [mem 0xfa900000-0xfabfffff]
>pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:05:00.0: reg 10: [io  0xd800-0xd8ff]
>pci 0000:05:00.0: reg 14: [mem 0xfaeec000-0xfaeeffff 64bit]
>pci 0000:05:00.0: reg 1c: [mem 0xfaef0000-0xfaefffff 64bit]
>pci 0000:05:00.0: reg 30: [mem 0xfac00000-0xfadfffff pref]
>pci 0000:05:00.0: supports D1 D2
>pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:09.0: PCI bridge to [bus 05-05]
>pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:09.0:   bridge window [mem 0xfac00000-0xfaefffff]
>pci 0000:00:09.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:06:00.0: reg 10: [io  0xef98-0xef9f]
>pci 0000:06:00.0: reg 14: [io  0xef8c-0xef8f]
>pci 0000:06:00.0: reg 18: [io  0xef90-0xef97]
>pci 0000:06:00.0: reg 1c: [io  0xef88-0xef8b]
>pci 0000:06:00.0: reg 20: [io  0xefa0-0xefaf]
>pci 0000:06:00.0: reg 30: [mem 0xfaff0000-0xfaffffff pref]
>pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.0: PCI bridge to [bus 06-06]
>pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff]
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:07:04.0: reg 10: [mem 0xf9000000-0xf9ffffff pref]
>pci 0000:07:04.0: reg 14: [mem 0xfbefc000-0xfbefffff]
>pci 0000:07:04.0: reg 18: [mem 0xfb000000-0xfb7fffff]
>pci 0000:07:05.0: reg 10: [mem 0xfbef2000-0xfbef27ff]
>pci 0000:07:05.0: reg 14: [mem 0xfbef4000-0xfbef7fff]
>pci 0000:07:05.0: supports D1 D2
>pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:07:05.0: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfb000000-0xfbefffff]
>pci 0000:00:1e.0:   bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x03e0-0x03ff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03bb] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x03c0-0x03df] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0400-0x041f] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xefff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xf9000000-0xfbffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0 (pxm 0)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
>Unable to assume _OSC PCIe control. Disabling ASPM
>ACPI: PCI Root Bridge [BR50] (domain 0000 [bus 80-fb])
>pci_root PNP0A08:01: host bridge window [mem 0xf8000000-0xf8ffffff]
>PCI host bridge to bus 0000:80
>pci_bus 0000:80: root bus resource [mem 0xf8000000-0xf8ffffff]
>pci 0000:80:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:80:00.0: PME# disabled
>pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:80:01.0: PME# disabled
>pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
>pci 0000:80:03.0: PME# disabled
>pci 0000:80:05.0: PME# supported from D0 D3hot D3cold
>pci 0000:80:05.0: PME# disabled
>pci 0000:80:07.0: PME# supported from D0 D3hot D3cold
>pci 0000:80:07.0: PME# disabled
>pci 0000:80:13.0: reg 10: [mem 0xfec9a000-0xfec9afff]
>pci 0000:80:13.0: PME# supported from D0 D3hot D3cold
>pci 0000:80:13.0: PME# disabled
>pci 0000:80:16.0: reg 10: [mem 0xf89f8000-0xf89fbfff 64bit]
>pci 0000:80:16.1: reg 10: [mem 0xf89f4000-0xf89f7fff 64bit]
>pci 0000:80:16.2: reg 10: [mem 0xf89f0000-0xf89f3fff 64bit]
>pci 0000:80:16.3: reg 10: [mem 0xf89ec000-0xf89effff 64bit]
>pci 0000:80:16.4: reg 10: [mem 0xf89e8000-0xf89ebfff 64bit]
>pci 0000:80:16.5: reg 10: [mem 0xf89e4000-0xf89e7fff 64bit]
>pci 0000:80:16.6: reg 10: [mem 0xf89e0000-0xf89e3fff 64bit]
>pci 0000:80:16.7: reg 10: [mem 0xf89dc000-0xf89dffff 64bit]
>pci 0000:80:00.0: PCI bridge to [bus 81-81]
>pci 0000:80:00.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:80:00.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:80:00.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:82:00.0: reg 10: [mem 0xf8ae0000-0xf8afffff]
>pci 0000:82:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:82:00.0: PME# disabled
>pci 0000:82:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:80:01.0: PCI bridge to [bus 82-85]
>pci 0000:80:01.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:80:01.0:   bridge window [mem 0xf8a00000-0xf8efffff]
>pci 0000:80:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:83:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:83:01.0: PME# disabled
>pci 0000:83:01.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:83:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:83:02.0: PME# disabled
>pci 0000:83:01.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:82:00.0: PCI bridge to [bus 83-85]
>pci 0000:82:00.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:82:00.0:   bridge window [mem 0xf8b00000-0xf8efffff]
>pci 0000:82:00.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:84:00.0: reg 10: [mem 0xf8c00000-0xf8cfffff 64bit]
>pci 0000:84:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:84:00.0: PME# disabled
>pci 0000:84:00.1: reg 10: [mem 0xf8b00000-0xf8bfffff 64bit]
>pci 0000:84:00.1: PME# supported from D0 D3hot D3cold
>pci 0000:84:00.1: PME# disabled
>pci 0000:83:01.0: PCI bridge to [bus 84-84]
>pci 0000:83:01.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:83:01.0:   bridge window [mem 0xf8b00000-0xf8cfffff]
>pci 0000:83:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:85:00.0: reg 10: [mem 0xf8e00000-0xf8efffff 64bit]
>pci 0000:85:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:85:00.0: PME# disabled
>pci 0000:85:00.1: reg 10: [mem 0xf8d00000-0xf8dfffff 64bit]
>pci 0000:85:00.1: PME# supported from D0 D3hot D3cold
>pci 0000:85:00.1: PME# disabled
>pci 0000:83:02.0: PCI bridge to [bus 85-85]
>pci 0000:83:02.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:83:02.0:   bridge window [mem 0xf8d00000-0xf8efffff]
>pci 0000:83:02.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:86:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:86:00.0: PME# disabled
>pci 0000:86:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:80:03.0: PCI bridge to [bus 86-87]
>pci 0000:80:03.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:80:03.0:   bridge window [mem 0xf8f00000-0xf8ffffff]
>pci 0000:80:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:87:04.0: reg 10: [mem 0xf8ff0000-0xf8ffffff 64bit]
>pci 0000:87:04.0: reg 18: [mem 0xf8fe0000-0xf8feffff 64bit]
>pci 0000:87:04.0: PME# supported from D3hot D3cold
>pci 0000:87:04.0: PME# disabled
>pci 0000:87:04.1: reg 10: [mem 0xf8fd0000-0xf8fdffff 64bit]
>pci 0000:87:04.1: reg 18: [mem 0xf8fc0000-0xf8fcffff 64bit]
>pci 0000:87:04.1: PME# supported from D3hot D3cold
>pci 0000:87:04.1: PME# disabled
>pci 0000:86:00.0: PCI bridge to [bus 87-87]
>pci 0000:86:00.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:86:00.0:   bridge window [mem 0xf8f00000-0xf8ffffff]
>pci 0000:86:00.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:80:05.0: PCI bridge to [bus 88-88]
>pci 0000:80:05.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:80:05.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:80:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:80:07.0: PCI bridge to [bus 89-89]
>pci 0000:80:07.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:80:07.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:80:07.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci_bus 0000:80: on NUMA node 1 (pxm 1)
>ACPI: PCI Interrupt Routing Table [\_SB_.BR50._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.BR50.NPE1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.BR50.NPE3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.BR50.NPE5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.BR50.NPE7._PRT]
> pci0000:80: Requesting ACPI _OSC control (0x1d)
>Unable to assume _OSC PCIe control. Disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *6 7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:07:04.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:07:04.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:13.0: no compatible bridge window for [mem 0xfec8a000-0xfec8afff]
>pci 0000:00:13.0: can't reserve [mem 0xfec8a000-0xfec8afff]
>pci 0000:80:13.0: no compatible bridge window for [mem 0xfec9a000-0xfec9afff]
>pci 0000:80:13.0: can't reserve [mem 0xfec9a000-0xfec9afff]
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:02: [dma 4]
>pnp 00:02: [io  0x0000-0x000f]
>pnp 00:02: [io  0x0081-0x0083]
>pnp 00:02: [io  0x0087]
>pnp 00:02: [io  0x0089-0x008b]
>pnp 00:02: [io  0x008f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [io  0x0070-0x0071]
>pnp 00:03: [irq 8]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:04: [io  0x0061]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:05: [io  0x00f0-0x00ff]
>pnp 00:05: [irq 13]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:06: [io  0x03f8-0x03ff]
>pnp 00:06: [irq 4]
>pnp 00:06: [dma 0 disabled]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:07: [io  0x02f8-0x02ff]
>pnp 00:07: [irq 5]
>pnp 00:07: [dma 0 disabled]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:08: [io  0x03e8-0x03ef]
>pnp 00:08: [irq 3]
>pnp 00:08: [dma 0 disabled]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:09: [io  0x164e-0x164f]
>pnp 00:09: [io  0x0000-0xffffffffffffffff disabled]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0a: [io  0x0010-0x001f]
>pnp 00:0a: [io  0x0022-0x003f]
>pnp 00:0a: [io  0x0044-0x004d]
>pnp 00:0a: [io  0x004e-0x004f]
>pnp 00:0a: [io  0x0050-0x005f]
>pnp 00:0a: [io  0x0062-0x0063]
>pnp 00:0a: [io  0x0065-0x006f]
>pnp 00:0a: [io  0x0072-0x007f]
>pnp 00:0a: [io  0x0080]
>pnp 00:0a: [io  0x0084-0x0086]
>pnp 00:0a: [io  0x0088]
>pnp 00:0a: [io  0x008c-0x008e]
>pnp 00:0a: [io  0x0090-0x009f]
>pnp 00:0a: [io  0x00a2-0x00bf]
>pnp 00:0a: [io  0x00e0-0x00ef]
>pnp 00:0a: [io  0x0cf8-0x0cff]
>pnp 00:0a: [io  0x04d0-0x04d1]
>pnp 00:0a: [mem 0x00000400-0x000004ff]
>pnp 00:0a: [io  0x0800-0x087f]
>pnp 00:0a: [io  0x0000-0xffffffffffffffff disabled]
>pnp 00:0a: [io  0x0500-0x057f]
>pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
>pnp 00:0a: [mem 0xfed40000-0xfed8ffff]
>pnp 00:0a: disabling [mem 0x00000400-0x000004ff] because it overlaps 0000:00:13.0 BAR 0 [mem 0x00000000-0x00000fff]
>pnp 00:0a: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:80:13.0 BAR 0 [mem 0x00000000-0x00000fff]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0b: [mem 0xfed00000-0xfed003ff]
>pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:0c: [io  0x0060]
>pnp 00:0c: [io  0x0064]
>pnp 00:0c: [mem 0xfec00000-0xfec00fff]
>pnp 00:0c: [mem 0xfee00000-0xfee00fff]
>pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0d: [io  0x0000-0xffffffffffffffff disabled]
>pnp 00:0d: [io  0x0a00-0x0a0f]
>pnp 00:0d: [io  0x0a10-0x0a1f]
>pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0e: [mem 0xe0000000-0xefffffff]
>pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0f: [mem 0x000c0000-0x000cffff]
>pnp 00:0f: [mem 0x000e0000-0x000fffff]
>pnp 00:0f: [mem 0xfed90000-0xffffffff]
>pnp 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:10: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:11: [mem 0xf89fe000-0xf89fffff]
>pnp 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:12: [io  0x0ca2-0x0ca3]
>pnp 00:12: Plug and Play ACPI device, IDs IPI0001 (active)
>pnp: PnP ACPI: found 19 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:09: [io  0x164e-0x164f] has been reserved
>system 00:0a: [io  0x0cf8-0x0cff] could not be reserved
>system 00:0a: [io  0x04d0-0x04d1] has been reserved
>system 00:0a: [io  0x0800-0x087f] has been reserved
>system 00:0a: [io  0x0500-0x057f] has been reserved
>system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:0a: [mem 0xfed40000-0xfed8ffff] has been reserved
>system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0d: [io  0x0a00-0x0a0f] has been reserved
>system 00:0d: [io  0x0a10-0x0a1f] has been reserved
>system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
>system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved
>system 00:11: [mem 0xf89fe000-0xf89fffff] could not be reserved
>PCI: max bus depth: 3 pci_try_num: 4
>pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
>pci 0000:00:1f.0: BAR 14: [io  0x0500-0x053f] has bogus alignment
>pci 0000:00:1c.0: BAR 15: assigned [mem 0xfa000000-0xfa1fffff 64bit pref]
>pci 0000:01:00.0: reg 184: [mem 0xfa860000-0xfa863fff 64bit]
>pci 0000:01:00.0: reg 190: [mem 0xfa840000-0xfa843fff 64bit]
>pci 0000:01:00.0: reg 184: [mem 0xfa860000-0xfa863fff 64bit]
>pci 0000:01:00.1: reg 184: [mem 0xfa7c0000-0xfa7c3fff 64bit]
>pci 0000:01:00.0: reg 184: [mem 0xfa860000-0xfa863fff 64bit]
>pci 0000:01:00.0: reg 190: [mem 0xfa840000-0xfa843fff 64bit]
>pci 0000:01:00.1: reg 190: [mem 0xfa7a0000-0xfa7a3fff 64bit]
>pci 0000:01:00.0: reg 184: [mem 0xfa860000-0xfa863fff 64bit]
>pci 0000:01:00.0: reg 190: [mem 0xfa840000-0xfa843fff 64bit]
>pci 0000:01:00.1: reg 184: [mem 0xfa7c0000-0xfa7c3fff 64bit]
>pci 0000:01:00.0: reg 184: [mem 0xfa860000-0xfa863fff 64bit]
>pci 0000:01:00.0: reg 184: [mem 0xfa860000-0xfa863fff 64bit]
>pci 0000:01:00.0: BAR 7: assigned [mem 0xfa700000-0xfa71ffff 64bit]
>pci 0000:01:00.0: BAR 7: set to [mem 0xfa700000-0xfa71ffff 64bit] (PCI address [0xfa700000-0xfa71ffff]
>pci 0000:01:00.0: reg 190: [mem 0xfa840000-0xfa843fff 64bit]
>pci 0000:01:00.0: reg 190: [mem 0xfa840000-0xfa843fff 64bit]
>pci 0000:01:00.0: BAR 10: assigned [mem 0xfa720000-0xfa73ffff 64bit]
>pci 0000:01:00.0: BAR 10: set to [mem 0xfa720000-0xfa73ffff 64bit] (PCI address [0xfa720000-0xfa73ffff]
>pci 0000:01:00.1: reg 184: [mem 0xfa7c0000-0xfa7c3fff 64bit]
>pci 0000:01:00.1: reg 184: [mem 0xfa7c0000-0xfa7c3fff 64bit]
>pci 0000:01:00.1: BAR 7: assigned [mem 0xfa740000-0xfa75ffff 64bit]
>pci 0000:01:00.1: BAR 7: set to [mem 0xfa740000-0xfa75ffff 64bit] (PCI address [0xfa740000-0xfa75ffff]
>pci 0000:01:00.1: reg 190: [mem 0xfa7a0000-0xfa7a3fff 64bit]
>pci 0000:01:00.1: reg 190: [mem 0xfa7a0000-0xfa7a3fff 64bit]
>pci 0000:01:00.1: BAR 10: assigned [mem 0xfa760000-0xfa77ffff 64bit]
>pci 0000:01:00.1: BAR 10: set to [mem 0xfa760000-0xfa77ffff 64bit] (PCI address [0xfa760000-0xfa77ffff]
>pci 0000:00:01.0: PCI bridge to [bus 01-02]
>pci 0000:00:01.0: PCI bridge to [bus 01-02]
>pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:01.0:   bridge window [mem 0xfa700000-0xfa8fffff]
>pci 0000:00:01.0:   bridge window [mem pref disabled]
>pci 0000:00:03.0: PCI bridge to [bus 03-03]
>pci 0000:00:03.0: PCI bridge to [bus 03-03]
>pci 0000:00:03.0:   bridge window [io  disabled]
>pci 0000:00:03.0:   bridge window [mem disabled]
>pci 0000:00:03.0:   bridge window [mem pref disabled]
>pci 0000:00:07.0: PCI bridge to [bus 04-04]
>pci 0000:00:07.0: PCI bridge to [bus 04-04]
>pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:07.0:   bridge window [mem 0xfa900000-0xfabfffff]
>pci 0000:00:07.0:   bridge window [mem pref disabled]
>pci 0000:00:09.0: PCI bridge to [bus 05-05]
>pci 0000:00:09.0: PCI bridge to [bus 05-05]
>pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:09.0:   bridge window [mem 0xfac00000-0xfaefffff]
>pci 0000:00:09.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.0: PCI bridge to [bus 06-06]
>pci 0000:00:1c.0: PCI bridge to [bus 06-06]
>pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff]
>pci 0000:00:1c.0:   bridge window [mem 0xfa000000-0xfa1fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 07-07]
>pci 0000:00:1e.0: PCI bridge to [bus 07-07]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem 0xfb000000-0xfbefffff]
>pci 0000:00:1e.0:   bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
>pci 0000:80:00.0: PCI bridge to [bus 81-81]
>pci 0000:80:00.0: PCI bridge to [bus 81-81]
>pci 0000:80:00.0:   bridge window [io  disabled]
>pci 0000:80:00.0:   bridge window [mem disabled]
>pci 0000:80:00.0:   bridge window [mem pref disabled]
>pci 0000:83:02.0: BAR 15: can't assign mem pref (size 0x200000)
>pci 0000:83:02.0: BAR 13: can't assign io (size 0x1000)
>pci 0000:83:01.0: BAR 15: can't assign mem pref (size 0x200000)
>pci 0000:83:01.0: BAR 13: can't assign io (size 0x1000)
>pci 0000:83:01.0: PCI bridge to [bus 84-84]
>pci 0000:83:01.0: PCI bridge to [bus 84-84]
>pci 0000:83:01.0:   bridge window [io  disabled]
>pci 0000:83:01.0:   bridge window [mem 0xf8b00000-0xf8cfffff]
>pci 0000:83:01.0:   bridge window [mem pref disabled]
>pci 0000:83:02.0: PCI bridge to [bus 85-85]
>pci 0000:83:02.0: PCI bridge to [bus 85-85]
>pci 0000:83:02.0:   bridge window [io  disabled]
>pci 0000:83:02.0:   bridge window [mem 0xf8d00000-0xf8efffff]
>pci 0000:83:02.0:   bridge window [mem pref disabled]
>pci 0000:82:00.0: PCI bridge to [bus 83-85]
>pci 0000:82:00.0: PCI bridge to [bus 83-85]
>pci 0000:82:00.0:   bridge window [io  disabled]
>pci 0000:82:00.0:   bridge window [mem 0xf8b00000-0xf8efffff]
>pci 0000:82:00.0:   bridge window [mem pref disabled]
>pci 0000:80:01.0: PCI bridge to [bus 82-85]
>pci 0000:80:01.0: PCI bridge to [bus 82-85]
>pci 0000:80:01.0:   bridge window [io  disabled]
>pci 0000:80:01.0:   bridge window [mem 0xf8a00000-0xf8efffff]
>pci 0000:80:01.0:   bridge window [mem pref disabled]
>pci 0000:86:00.0: PCI bridge to [bus 87-87]
>pci 0000:86:00.0: PCI bridge to [bus 87-87]
>pci 0000:86:00.0:   bridge window [io  disabled]
>pci 0000:86:00.0:   bridge window [mem 0xf8f00000-0xf8ffffff]
>pci 0000:86:00.0:   bridge window [mem pref disabled]
>pci 0000:80:03.0: PCI bridge to [bus 86-87]
>pci 0000:80:03.0: PCI bridge to [bus 86-87]
>pci 0000:80:03.0:   bridge window [io  disabled]
>pci 0000:80:03.0:   bridge window [mem 0xf8f00000-0xf8ffffff]
>pci 0000:80:03.0:   bridge window [mem pref disabled]
>pci 0000:80:05.0: PCI bridge to [bus 88-88]
>pci 0000:80:05.0: PCI bridge to [bus 88-88]
>pci 0000:80:05.0:   bridge window [io  disabled]
>pci 0000:80:05.0:   bridge window [mem disabled]
>pci 0000:80:05.0:   bridge window [mem pref disabled]
>pci 0000:80:07.0: PCI bridge to [bus 89-89]
>pci 0000:80:07.0: PCI bridge to [bus 89-89]
>pci 0000:80:07.0:   bridge window [io  disabled]
>pci 0000:80:07.0:   bridge window [mem disabled]
>pci 0000:80:07.0:   bridge window [mem pref disabled]
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:03.0: setting latency timer to 64
>pci 0000:00:07.0: setting latency timer to 64
>pci 0000:00:09.0: setting latency timer to 64
>  alloc irq_desc for 17 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:80:00.0: setting latency timer to 64
>pci 0000:80:01.0: setting latency timer to 64
>  alloc irq_desc for 52 on node 1
>  alloc kstat_irqs on node 1
>pci 0000:82:00.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
>pci 0000:82:00.0: setting latency timer to 64
>  alloc irq_desc for 64 on node 1
>  alloc kstat_irqs on node 1
>pci 0000:83:01.0: PCI INT A -> GSI 64 (level, low) -> IRQ 64
>pci 0000:83:01.0: setting latency timer to 64
>  alloc irq_desc for 65 on node 1
>  alloc kstat_irqs on node 1
>pci 0000:83:02.0: PCI INT A -> GSI 65 (level, low) -> IRQ 65
>pci 0000:83:02.0: setting latency timer to 64
>pci 0000:80:03.0: setting latency timer to 64
>pci 0000:86:00.0: setting latency timer to 64
>pci 0000:80:05.0: setting latency timer to 64
>pci 0000:80:07.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
>pci_bus 0000:00: resource 5 [io  0x03e0-0x03ff]
>pci_bus 0000:00: resource 6 [io  0x03b0-0x03bb]
>pci_bus 0000:00: resource 7 [io  0x03c0-0x03df]
>pci_bus 0000:00: resource 8 [io  0x0400-0x041f]
>pci_bus 0000:00: resource 9 [io  0x0d00-0xefff]
>pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 11 [mem 0xf9000000-0xfbffffff]
>pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:01: resource 1 [mem 0xfa700000-0xfa8fffff]
>pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:04: resource 1 [mem 0xfa900000-0xfabfffff]
>pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:05: resource 1 [mem 0xfac00000-0xfaefffff]
>pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:06: resource 1 [mem 0xfaf00000-0xfaffffff]
>pci_bus 0000:06: resource 2 [mem 0xfa000000-0xfa1fffff 64bit pref]
>pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfbefffff]
>pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref]
>pci_bus 0000:07: resource 4 [io  0x0000-0x03af]
>pci_bus 0000:07: resource 5 [io  0x03e0-0x03ff]
>pci_bus 0000:07: resource 6 [io  0x03b0-0x03bb]
>pci_bus 0000:07: resource 7 [io  0x03c0-0x03df]
>pci_bus 0000:07: resource 8 [io  0x0400-0x041f]
>pci_bus 0000:07: resource 9 [io  0x0d00-0xefff]
>pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:07: resource 11 [mem 0xf9000000-0xfbffffff]
>pci_bus 0000:80: resource 4 [mem 0xf8000000-0xf8ffffff]
>pci_bus 0000:82: resource 1 [mem 0xf8a00000-0xf8efffff]
>pci_bus 0000:83: resource 1 [mem 0xf8b00000-0xf8efffff]
>pci_bus 0000:84: resource 1 [mem 0xf8b00000-0xf8cfffff]
>pci_bus 0000:85: resource 1 [mem 0xf8d00000-0xf8efffff]
>pci_bus 0000:86: resource 1 [mem 0xf8f00000-0xf8ffffff]
>pci_bus 0000:87: resource 1 [mem 0xf8f00000-0xf8ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>  alloc irq_desc for 16 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1a.0: PCI INT A disabled
>  alloc irq_desc for 21 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>pci 0000:00:1a.1: PCI INT B disabled
>  alloc irq_desc for 19 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1a.2: PCI INT D disabled
>  alloc irq_desc for 18 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1a.7: PCI INT C disabled
>  alloc irq_desc for 23 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1d.0: PCI INT A disabled
>pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1d.1: PCI INT B disabled
>pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1d.2: PCI INT C disabled
>pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1d.7: PCI INT A disabled
>pci 0000:07:04.0: Boot video device
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 17001k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1399784632.642:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 32768
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>ksign: Installing public key data
>Loading keyring
>- Added public key DCB7BD1E9B300CBF
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>- Added public key D4A26C9CCD09BEDA
>- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: setting latency timer to 64
>  alloc irq_desc for 72 on node 0
>  alloc kstat_irqs on node 0
>pcieport 0000:00:1c.0: irq 72 for MSI/MSI-X
>pcieport 0000:82:00.0: setting latency timer to 64
>  alloc irq_desc for 73 on node 1
>  alloc kstat_irqs on node 1
>pcieport 0000:82:00.0: irq 73 for MSI/MSI-X
>pcieport 0000:83:01.0: setting latency timer to 64
>  alloc irq_desc for 74 on node 1
>  alloc kstat_irqs on node 1
>pcieport 0000:83:01.0: irq 74 for MSI/MSI-X
>pcieport 0000:83:02.0: setting latency timer to 64
>  alloc irq_desc for 75 on node 1
>  alloc kstat_irqs on node 1
>pcieport 0000:83:02.0: irq 75 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>intel_idle: MWAIT substates: 0x1120
>intel_idle: v0.4 model 0x2C
>intel_idle: lapic_timer_reliable_states 0xffffffff
>ipmi message handler version 39.2
>IPMI System Interface driver.
>ipmi_si: probing via ACPI
>ipmi_si 00:12: [io  0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
>ipmi_si: Adding ACPI-specified kcs state machine
>ipmi_si: probing via SMBIOS
>ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
>ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
>ipmi_si: probing via SPMI
>ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
>ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
>ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
>ipmi_si 00:12: Found new BMC (man_id: 0x00b980, prod_id: 0xaabb, dev_id: 0x20)
>ipmi_si 00:12: IPMI kcs interface initialized
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000bf77e2c0 04DAC (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
>ACPI: SSDT 00000000bf783070 00C69 (v01  PmRef  P001Cst 00003001 INTL 20051117)
>ACPI: SSDT 00000000bf783ce0 00A0A (v01  PmRef  Cpu0Tst 00003000 INTL 20051117)
>ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
>ERST: Failed to get Error Log Address Range.
>[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
>GHES: APEI firmware first mode is enabled by WHEA _OSC.
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>crash memory driver: version 1.1
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 5) is a 16550A
>Refined TSC clocksource calibration: 2533.423 MHz.
>Switching to clocksource tsc
>serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 5) is a 16550A
>00:08: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfa6fc000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa6da000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009f80
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009f40
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009f20
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009f00
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009ec0
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009ea0
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>GRE over IPv4 demultiplexor driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>rtc_cmos 00:03: setting system clock to 2014-05-11 05:03:57 UTC (1399784637)
>Initalizing network drop monitor service
>Freeing unused kernel memory: 1276k freed
>Write protecting the kernel read-only data: 10240k
>Freeing unused kernel memory: 800k freed
>Freeing unused kernel memory: 1584k freed
>dracut: dracut-004-303.el6
>dracut: rd_NO_LUKS: removing cryptoluks activation
>usb 5-2: new full speed USB device number 2 using uhci_hcd
>dracut: rd_NO_LVM: removing LVM activation
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
>udev: starting version 147
>dracut: Starting plymouth daemon
>dracut: rd_NO_DM: removing DM RAID activation
>dracut: rd_NO_MD: removing MD RAID activation
>usb 5-2: New USB device found, idVendor=046b, idProduct=ff10
>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 5-2: Product: Virtual Keyboard and Mouse
>usb 5-2: Manufacturer: American Megatrends Inc.
>usb 5-2: SerialNumber: serial
>usb 5-2: configuration #1 chosen from 1 choice
>input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input3
>generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-2/input0
>input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input4
>Fusion MPT base driver 3.04.20
>Copyright (c) 1999-2008 LSI Corporation
>Fusion MPT SAS Host driver 3.04.20
>  alloc irq_desc for 30 on node 0
>  alloc kstat_irqs on node 0
>mptsas 0000:04:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
>generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-2/input1
>mptbase: ioc0: Initiating bringup
>usb 6-1: new low speed USB device number 2 using uhci_hcd
>usb 6-1: device descriptor read/64, error -71
>ioc0: LSISAS1068E B3: Capabilities={Initiator}
>mptsas 0000:04:00.0: setting latency timer to 64
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: new low speed USB device number 3 using uhci_hcd
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: new low speed USB device number 4 using uhci_hcd
>usb 6-1: device not accepting address 4, error -71
>usb 6-1: new low speed USB device number 5 using uhci_hcd
>usb 6-1: device not accepting address 5, error -71
>hub 6-0:1.0: unable to enumerate USB device on port 1
>scsi0 : ioc0: LSISAS1068E B3, FwRev=01200000h, Ports=1, MaxQ=277, IRQ=30
>mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 0, sas_addr 0x1221000000000000
>scsi 0:0:0:0: Direct-Access     ATA      ST500NM0011      SN03 PQ: 0 ANSI: 5
>mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 2, phy 1, sas_addr 0x1221000001000000
>scsi 0:0:1:0: Direct-Access     ATA      ST500NM0011      SN03 PQ: 0 ANSI: 5
>mptsas: ioc0: attaching raid volume, channel 1, id 0
>scsi 0:1:0:0: Direct-Access     LSILOGIC Logical Volume   3000 PQ: 0 ANSI: 2
>  alloc irq_desc for 32 on node 0
>  alloc kstat_irqs on node 0
>mptsas 0000:05:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
>mptbase: ioc1: Initiating bringup
>ioc1: LSISAS1068E B3: Capabilities={Initiator}
>mptsas 0000:05:00.0: setting latency timer to 64
>scsi1 : ioc1: LSISAS1068E B3, FwRev=01200000h, Ports=1, MaxQ=277, IRQ=32
>mptsas: ioc1: attaching ssp device: fw_channel 0, fw_id 4, phy 0, sas_addr 0x50080e52dbe4a000
>scsi 1:0:0:0: Direct-Access     SGI      IS400            0780 PQ: 0 ANSI: 5
>scsi 1:0:0:1: Direct-Access     SGI      IS400            0780 PQ: 0 ANSI: 5
>scsi 1:0:0:31: Direct-Access     SGI      Universal Xport  0780 PQ: 0 ANSI: 5
>mptsas: ioc1: attaching ssp device: fw_channel 0, fw_id 8, phy 4, sas_addr 0x50080e52dc5e2000
>scsi 1:0:1:0: Direct-Access     SGI      IS400            0780 PQ: 0 ANSI: 5
>scsi 1:0:1:1: Direct-Access     SGI      IS400            0780 PQ: 0 ANSI: 5
>scsi 1:0:1:31: Direct-Access     SGI      Universal Xport  0780 PQ: 0 ANSI: 5
>pata_jmicron 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pata_jmicron 0000:06:00.0: setting latency timer to 64
>scsi2 : pata_jmicron
>scsi3 : pata_jmicron
>ata1: PATA max UDMA/100 cmd 0xef98 ctl 0xef8c bmdma 0xefa0 irq 16
>ata2: PATA max UDMA/100 cmd 0xef90 ctl 0xef88 bmdma 0xefa8 irq 16
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>  alloc irq_desc for 76 on node 0
>  alloc kstat_irqs on node 0
>ahci 0000:00:1f.2: irq 76 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi4 : ahci
>scsi5 : ahci
>scsi6 : ahci
>scsi7 : ahci
>scsi8 : ahci
>scsi9 : ahci
>ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 76
>ata4: SATA max UDMA/133 abar m2048@0xfa6d8000 port 0xfa6d8180 irq 76
>ata5: SATA max UDMA/133 abar m2048@0xfa6d8000 port 0xfa6d8200 irq 76
>ata6: SATA max UDMA/133 abar m2048@0xfa6d8000 port 0xfa6d8280 irq 76
>ata7: SATA max UDMA/133 abar m2048@0xfa6d8000 port 0xfa6d8300 irq 76
>ata8: SATA max UDMA/133 abar m2048@0xfa6d8000 port 0xfa6d8380 irq 76
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: MATSHITADVD-RAM UJ8A0AS, 1.51, max UDMA/100, ATAPI AN
>ata3.00: configured for UDMA/100
>scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8A0AS  1.51 PQ: 0 ANSI: 5
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>sd 0:1:0:0: [sda] 976562176 512-byte logical blocks: (499 GB/465 GiB)
>sd 1:0:0:0: [sdb] 21474836480 512-byte logical blocks: (10.9 TB/10.0 TiB)
>sd 1:0:0:1: [sdc] 37119254855 512-byte logical blocks: (19.0 TB/17.2 TiB)
>sd 0:1:0:0: [sda] Write Protect is off
>sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
>sd 1:0:1:1: [sde] 37119254855 512-byte logical blocks: (19.0 TB/17.2 TiB)
>sd 1:0:1:0: [sdd] 21474836480 512-byte logical blocks: (10.9 TB/10.0 TiB)
>sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:1: [sdc] Write Protect is off
>sd 1:0:0:1: [sdc] Mode Sense: 83 00 10 08
>sd 1:0:1:1: [sde] Write Protect is off
>sd 1:0:1:1: [sde] Mode Sense: 83 00 10 08
>sd 1:0:0:1: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 1:0:1:0: [sdd] Write Protect is off
>sd 1:0:1:0: [sdd] Mode Sense: 83 00 10 08
>sd 1:0:1:1: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
>sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sda:
> sdc:
> sde:
> sdd: sde1
> sda1 sda2
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 83 00 10 08
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
> sda3 sda4
> sdb:
>sd 1:0:1:1: [sde] Attached SCSI disk
> sdc1
>sd 0:1:0:0: [sda] Attached SCSI disk
>sd 1:0:0:1: [sdc] Attached SCSI disk
> sdd1
> sdb1
>sd 1:0:0:0: [sdb] Attached SCSI disk
>sd 1:0:1:0: [sdd] Attached SCSI disk
>firewire_ohci 0000:07:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>firewire_ohci: Added fw-ohci device 0000:07:05.0, OHCI version 1.10
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>firewire_core: created device fw0: GUID 003048000020c8ee, S400
>EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: 
>dracut: Mounted root filesystem /dev/sda2
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1399784676.961:2): selinux=0 auid=4294967295 ses=4294967295
>dracut: 
>dracut: Switching root
>udev: starting version 147
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>dca service started, version 1.12.1
>ioatdma: Intel(R) QuickData Technology Driver 4.00
>  alloc irq_desc for 43 on node 0
>  alloc kstat_irqs on node 0
>ioatdma 0000:00:16.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43
>ioatdma 0000:00:16.0: setting latency timer to 64
>  alloc irq_desc for 77 on node 0
>  alloc kstat_irqs on node 0
>ioatdma 0000:00:16.0: irq 77 for MSI/MSI-X
>  alloc irq_desc for 44 on node 0
>  alloc kstat_irqs on node 0
>ioatdma 0000:00:16.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44
>ioatdma 0000:00:16.1: setting latency timer to 64
>  alloc irq_desc for 78 on node 0
>  alloc kstat_irqs on node 0
>ioatdma 0000:00:16.1: irq 78 for MSI/MSI-X
>  alloc irq_desc for 45 on node 0
>  alloc kstat_irqs on node 0
>ioatdma 0000:00:16.2: PCI INT C -> GSI 45 (level, low) -> IRQ 45
>ioatdma 0000:00:16.2: setting latency timer to 64
>  alloc irq_desc for 79 on node 0
>  alloc kstat_irqs on node 0
>ioatdma 0000:00:16.2: irq 79 for MSI/MSI-X
>  alloc irq_desc for 46 on node 0
>  alloc kstat_irqs on node 0
>ioatdma 0000:00:16.3: PCI INT D -> GSI 46 (level, low) -> IRQ 46
>ioatdma 0000:00:16.3: setting latency timer to 64
>  alloc irq_desc for 80 on node 0
>  alloc kstat_irqs on node 0
>ioatdma 0000:00:16.3: irq 80 for MSI/MSI-X
>ioatdma 0000:00:16.4: PCI INT A -> GSI 43 (level, low) -> IRQ 43
>ioatdma 0000:00:16.4: setting latency timer to 64
>  alloc irq_desc for 81 on node 0
>  alloc kstat_irqs on node 0
>ioatdma 0000:00:16.4: irq 81 for MSI/MSI-X
>ioatdma 0000:00:16.5: PCI INT B -> GSI 44 (level, low) -> IRQ 44
>ioatdma 0000:00:16.5: setting latency timer to 64
>  alloc irq_desc for 82 on node 0
>  alloc kstat_irqs on node 0
>ioatdma 0000:00:16.5: irq 82 for MSI/MSI-X
>ioatdma 0000:00:16.6: PCI INT C -> GSI 45 (level, low) -> IRQ 45
>ioatdma 0000:00:16.6: setting latency timer to 64
>  alloc irq_desc for 83 on node 0
>  alloc kstat_irqs on node 0
>ioatdma 0000:00:16.6: irq 83 for MSI/MSI-X
>ioatdma 0000:00:16.7: PCI INT D -> GSI 46 (level, low) -> IRQ 46
>ioatdma 0000:00:16.7: setting latency timer to 64
>  alloc irq_desc for 84 on node 0
>  alloc kstat_irqs on node 0
>ioatdma 0000:00:16.7: irq 84 for MSI/MSI-X
>  alloc irq_desc for 67 on node 1
>  alloc kstat_irqs on node 1
>ioatdma 0000:80:16.0: PCI INT A -> GSI 67 (level, low) -> IRQ 67
>ioatdma 0000:80:16.0: setting latency timer to 64
>  alloc irq_desc for 85 on node 1
>  alloc kstat_irqs on node 1
>ioatdma 0000:80:16.0: irq 85 for MSI/MSI-X
>  alloc irq_desc for 68 on node 1
>  alloc kstat_irqs on node 1
>ioatdma 0000:80:16.1: PCI INT B -> GSI 68 (level, low) -> IRQ 68
>ioatdma 0000:80:16.1: setting latency timer to 64
>  alloc irq_desc for 86 on node 1
>  alloc kstat_irqs on node 1
>ioatdma 0000:80:16.1: irq 86 for MSI/MSI-X
>  alloc irq_desc for 69 on node 1
>  alloc kstat_irqs on node 1
>ioatdma 0000:80:16.2: PCI INT C -> GSI 69 (level, low) -> IRQ 69
>ioatdma 0000:80:16.2: setting latency timer to 64
>  alloc irq_desc for 87 on node 1
>  alloc kstat_irqs on node 1
>ioatdma 0000:80:16.2: irq 87 for MSI/MSI-X
>  alloc irq_desc for 70 on node 1
>  alloc kstat_irqs on node 1
>ioatdma 0000:80:16.3: PCI INT D -> GSI 70 (level, low) -> IRQ 70
>ioatdma 0000:80:16.3: setting latency timer to 64
>  alloc irq_desc for 88 on node 1
>  alloc kstat_irqs on node 1
>ioatdma 0000:80:16.3: irq 88 for MSI/MSI-X
>ioatdma 0000:80:16.4: PCI INT A -> GSI 67 (level, low) -> IRQ 67
>ioatdma 0000:80:16.4: setting latency timer to 64
>  alloc irq_desc for 89 on node 1
>  alloc kstat_irqs on node 1
>ioatdma 0000:80:16.4: irq 89 for MSI/MSI-X
>ioatdma 0000:80:16.5: PCI INT B -> GSI 68 (level, low) -> IRQ 68
>ioatdma 0000:80:16.5: setting latency timer to 64
>  alloc irq_desc for 90 on node 1
>  alloc kstat_irqs on node 1
>ioatdma 0000:80:16.5: irq 90 for MSI/MSI-X
>ioatdma 0000:80:16.6: PCI INT C -> GSI 69 (level, low) -> IRQ 69
>ioatdma 0000:80:16.6: setting latency timer to 64
>  alloc irq_desc for 91 on node 1
>  alloc kstat_irqs on node 1
>ioatdma 0000:80:16.6: irq 91 for MSI/MSI-X
>ioatdma 0000:80:16.7: PCI INT D -> GSI 70 (level, low) -> IRQ 70
>ioatdma 0000:80:16.7: setting latency timer to 64
>  alloc irq_desc for 92 on node 1
>  alloc kstat_irqs on node 1
>ioatdma 0000:80:16.7: irq 92 for MSI/MSI-X
>ACPI: resource (null) [io  0x0828-0x082f] conflicts with ACPI region PMRG [io 0x800-0x84f]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>lpc_ich: Resource conflict(s) found affecting gpio_ich
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>scsi 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 0
>sd 0:1:0:0: Attached scsi generic sg2 type 0
>sd 1:0:0:0: Attached scsi generic sg3 type 0
>sd 1:0:0:1: Attached scsi generic sg4 type 0
>scsi 1:0:0:31: Attached scsi generic sg5 type 0
>sd 1:0:1:0: Attached scsi generic sg6 type 0
>sd 1:0:1:1: Attached scsi generic sg7 type 0
>scsi 1:0:1:31: Attached scsi generic sg8 type 0
>sr 4:0:0:0: Attached scsi generic sg9 type 5
>pps_core: LinuxPPS API ver. 1 registered
>pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>PTP clock support registered
>igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>igb: Copyright (c) 2007-2013 Intel Corporation.
>  alloc irq_desc for 28 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
>igb 0000:01:00.0: setting latency timer to 64
>  alloc irq_desc for 93 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.0: irq 93 for MSI/MSI-X
>  alloc irq_desc for 94 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.0: irq 94 for MSI/MSI-X
>  alloc irq_desc for 95 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.0: irq 95 for MSI/MSI-X
>  alloc irq_desc for 96 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.0: irq 96 for MSI/MSI-X
>  alloc irq_desc for 97 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.0: irq 97 for MSI/MSI-X
>  alloc irq_desc for 98 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.0: irq 98 for MSI/MSI-X
>  alloc irq_desc for 99 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.0: irq 99 for MSI/MSI-X
>  alloc irq_desc for 100 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.0: irq 100 for MSI/MSI-X
>  alloc irq_desc for 101 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.0: irq 101 for MSI/MSI-X
>igb 0000:01:00.0: irq 93 for MSI/MSI-X
>igb 0000:01:00.0: irq 94 for MSI/MSI-X
>igb 0000:01:00.0: irq 95 for MSI/MSI-X
>igb 0000:01:00.0: irq 96 for MSI/MSI-X
>igb 0000:01:00.0: irq 97 for MSI/MSI-X
>igb 0000:01:00.0: irq 98 for MSI/MSI-X
>igb 0000:01:00.0: irq 99 for MSI/MSI-X
>igb 0000:01:00.0: irq 100 for MSI/MSI-X
>igb 0000:01:00.0: irq 101 for MSI/MSI-X
>igb 0000:01:00.0: added PHC on eth0
>igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
>igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:25:90:68:ed:b2
>igb 0000:01:00.0: eth0: PBA No: Unknown
>igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
>  alloc irq_desc for 40 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.1: PCI INT B -> GSI 40 (level, low) -> IRQ 40
>igb 0000:01:00.1: setting latency timer to 64
>  alloc irq_desc for 102 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.1: irq 102 for MSI/MSI-X
>  alloc irq_desc for 103 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.1: irq 103 for MSI/MSI-X
>  alloc irq_desc for 104 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.1: irq 104 for MSI/MSI-X
>  alloc irq_desc for 105 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.1: irq 105 for MSI/MSI-X
>  alloc irq_desc for 106 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.1: irq 106 for MSI/MSI-X
>  alloc irq_desc for 107 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.1: irq 107 for MSI/MSI-X
>  alloc irq_desc for 108 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.1: irq 108 for MSI/MSI-X
>  alloc irq_desc for 109 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.1: irq 109 for MSI/MSI-X
>  alloc irq_desc for 110 on node 0
>  alloc kstat_irqs on node 0
>igb 0000:01:00.1: irq 110 for MSI/MSI-X
>igb 0000:01:00.1: irq 102 for MSI/MSI-X
>igb 0000:01:00.1: irq 103 for MSI/MSI-X
>igb 0000:01:00.1: irq 104 for MSI/MSI-X
>igb 0000:01:00.1: irq 105 for MSI/MSI-X
>igb 0000:01:00.1: irq 106 for MSI/MSI-X
>igb 0000:01:00.1: irq 107 for MSI/MSI-X
>igb 0000:01:00.1: irq 108 for MSI/MSI-X
>igb 0000:01:00.1: irq 109 for MSI/MSI-X
>igb 0000:01:00.1: irq 110 for MSI/MSI-X
>igb 0000:01:00.1: added PHC on eth1
>igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
>igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:25:90:68:ed:b3
>igb 0000:01:00.1: eth1: PBA No: Unknown
>igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
>iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
>bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)
>bnx2 0000:84:00.0: PCI INT A -> GSI 64 (level, low) -> IRQ 64
>bnx2 0000:84:00.0: setting latency timer to 64
>bnx2 0000:84:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
>bnx2 0000:84:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
>bnx2 0000:84:00.0: eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8c00000, IRQ 64, node addr 00:e0:ed:0d:4d:04
>bnx2 0000:84:00.1: PCI INT B -> GSI 65 (level, low) -> IRQ 65
>bnx2 0000:84:00.1: setting latency timer to 64
>bnx2 0000:84:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
>bnx2 0000:84:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
>bnx2 0000:84:00.1: eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8b00000, IRQ 65, node addr 00:e0:ed:0d:4d:06
>bnx2 0000:85:00.0: PCI INT A -> GSI 65 (level, low) -> IRQ 65
>bnx2 0000:85:00.0: setting latency timer to 64
>bnx2 0000:85:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
>bnx2 0000:85:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
>bnx2 0000:85:00.0: eth4: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8e00000, IRQ 65, node addr 00:e0:ed:0d:4d:08
>  alloc irq_desc for 71 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.1: PCI INT B -> GSI 71 (level, low) -> IRQ 71
>bnx2 0000:85:00.1: setting latency timer to 64
>bnx2 0000:85:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
>bnx2 0000:85:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
>bnx2 0000:85:00.1: eth5: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8d00000, IRQ 71, node addr 00:e0:ed:0d:4d:0a
>udev: renamed network interface eth3 to rename5
>udev: renamed network interface eth5 to eth7
>udev: renamed network interface eth4 to eth6
>udev: renamed network interface rename5 to eth5
>microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU12 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU13 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU14 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU15 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU16 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU17 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU18 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU19 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU20 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU21 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU22 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>microcode: CPU23 sig=0x206c2, pf=0x1, revision=0x13
>platform microcode: firmware: requesting intel-ucode/06-2c-02
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>tg3.c:v3.132 (May 21, 2013)
>  alloc irq_desc for 48 on node 1
>  alloc kstat_irqs on node 1
>tg3 0000:87:04.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
>tg3 0000:87:04.0: eth3: Tigon3 [partno(030-2309-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:e0:ed:15:ec:1e
>tg3 0000:87:04.0: eth3: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
>tg3 0000:87:04.0: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>tg3 0000:87:04.0: eth3: dma_rwctrl[76148000] dma_mask[40-bit]
>  alloc irq_desc for 58 on node 1
>  alloc kstat_irqs on node 1
>tg3 0000:87:04.1: PCI INT B -> GSI 58 (level, low) -> IRQ 58
>tg3 0000:87:04.1: eth4: Tigon3 [partno(030-2309-001) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:e0:ed:15:ec:1f
>tg3 0000:87:04.1: eth4: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
>tg3 0000:87:04.1: eth4: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>tg3 0000:87:04.1: eth4: dma_rwctrl[76148000] dma_mask[40-bit]
>udev: renamed network interface eth3 to rename8
>udev: renamed network interface eth4 to eth3
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
>EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: 
>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS (sdd1): Mounting Filesystem
>XFS (sdd1): Starting recovery (logdev: internal)
>XFS (sdd1): Ending recovery (logdev: internal)
>XFS (sde1): Mounting Filesystem
>XFS (sde1): Starting recovery (logdev: internal)
>XFS (sde1): Ending recovery (logdev: internal)
>Adding 8388600k swap on /dev/sda3.  Priority:-1 extents:1 across:8388600k 
>NET: Registered protocol family 21
>Registered RDS/tcp transport
>Registered RDS/iwarp transport
>Registered RDS/infiniband transport
>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>All bugs added by David S. Miller <davem@redhat.com>
>Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
>bonding: bond0: setting mode to 802.3ad (4).
>bonding: bond0: Setting MII monitoring interval to 100.
>bonding: bond0: setting mode to 802.3ad (4).
>bonding: bond0: Setting MII monitoring interval to 100.
>bonding: bond0: setting mode to 802.3ad (4).
>bonding: bond0: Setting MII monitoring interval to 100.
>bonding: bond0: setting mode to 802.3ad (4).
>bonding: bond0: Setting MII monitoring interval to 100.
>bonding: bond0: Adding slave eth1.
>igb 0000:01:00.1: changing MTU from 1500 to 9000
>8021q: adding VLAN 0 to HW filter on device eth1
>bonding: bond0: enslaving eth1 as a backup interface with a down link.
>bonding: bond0: Adding slave eth2.
>  alloc irq_desc for 111 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.0: irq 111 for MSI/MSI-X
>  alloc irq_desc for 112 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.0: irq 112 for MSI/MSI-X
>  alloc irq_desc for 113 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.0: irq 113 for MSI/MSI-X
>  alloc irq_desc for 114 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.0: irq 114 for MSI/MSI-X
>  alloc irq_desc for 115 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.0: irq 115 for MSI/MSI-X
>  alloc irq_desc for 116 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.0: irq 116 for MSI/MSI-X
>  alloc irq_desc for 117 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.0: irq 117 for MSI/MSI-X
>  alloc irq_desc for 118 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.0: irq 118 for MSI/MSI-X
>  alloc irq_desc for 119 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.0: irq 119 for MSI/MSI-X
>bnx2 0000:84:00.0: eth2: using MSIX
>bonding: bond0: enslaving eth2 as a backup interface with a down link.
>bonding: bond0: Adding slave eth3.
>  alloc irq_desc for 120 on node 1
>  alloc kstat_irqs on node 1
>tg3 0000:87:04.1: irq 120 for MSI/MSI-X
>bonding: bond0: enslaving eth3 as a backup interface with a down link.
>bonding: bond0: Adding slave eth5.
>  alloc irq_desc for 121 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.1: irq 121 for MSI/MSI-X
>  alloc irq_desc for 122 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.1: irq 122 for MSI/MSI-X
>  alloc irq_desc for 123 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.1: irq 123 for MSI/MSI-X
>  alloc irq_desc for 124 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.1: irq 124 for MSI/MSI-X
>  alloc irq_desc for 125 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.1: irq 125 for MSI/MSI-X
>  alloc irq_desc for 126 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.1: irq 126 for MSI/MSI-X
>  alloc irq_desc for 127 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.1: irq 127 for MSI/MSI-X
>  alloc irq_desc for 128 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.1: irq 128 for MSI/MSI-X
>  alloc irq_desc for 129 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:84:00.1: irq 129 for MSI/MSI-X
>bnx2 0000:84:00.1: eth5: using MSIX
>bonding: bond0: enslaving eth5 as a backup interface with a down link.
>bonding: bond0: Adding slave eth6.
>  alloc irq_desc for 130 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.0: irq 130 for MSI/MSI-X
>  alloc irq_desc for 131 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.0: irq 131 for MSI/MSI-X
>  alloc irq_desc for 132 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.0: irq 132 for MSI/MSI-X
>  alloc irq_desc for 133 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.0: irq 133 for MSI/MSI-X
>  alloc irq_desc for 134 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.0: irq 134 for MSI/MSI-X
>  alloc irq_desc for 135 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.0: irq 135 for MSI/MSI-X
>  alloc irq_desc for 136 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.0: irq 136 for MSI/MSI-X
>  alloc irq_desc for 137 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.0: irq 137 for MSI/MSI-X
>  alloc irq_desc for 138 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.0: irq 138 for MSI/MSI-X
>bnx2 0000:85:00.0: eth6: using MSIX
>bonding: bond0: enslaving eth6 as a backup interface with a down link.
>bonding: bond0: Adding slave eth7.
>  alloc irq_desc for 139 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.1: irq 139 for MSI/MSI-X
>  alloc irq_desc for 140 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.1: irq 140 for MSI/MSI-X
>  alloc irq_desc for 141 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.1: irq 141 for MSI/MSI-X
>  alloc irq_desc for 142 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.1: irq 142 for MSI/MSI-X
>  alloc irq_desc for 143 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.1: irq 143 for MSI/MSI-X
>  alloc irq_desc for 144 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.1: irq 144 for MSI/MSI-X
>  alloc irq_desc for 145 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.1: irq 145 for MSI/MSI-X
>  alloc irq_desc for 146 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.1: irq 146 for MSI/MSI-X
>  alloc irq_desc for 147 on node 1
>  alloc kstat_irqs on node 1
>bnx2 0000:85:00.1: irq 147 for MSI/MSI-X
>bnx2 0000:85:00.1: eth7: using MSIX
>bonding: bond0: enslaving eth7 as a backup interface with a down link.
>ADDRCONF(NETDEV_UP): bond0: link is not ready
>8021q: adding VLAN 0 to HW filter on device bond0
>igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
>bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
>ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
>tg3 0000:87:04.1: eth3: Link is up at 1000 Mbps, full duplex
>tg3 0000:87:04.1: eth3: Flow control is off for TX and off for RX
>bond0: link status definitely up for interface eth3, 1000 Mbps full duplex.
>bnx2 0000:84:00.0: eth2: NIC Copper Link is Up, 1000 Mbps full duplex
>bond0: link status definitely up for interface eth2, 1000 Mbps full duplex.
>bnx2 0000:84:00.1: eth5: NIC Copper Link is Up, 1000 Mbps full duplex
>bond0: link status definitely up for interface eth5, 1000 Mbps full duplex.
>bnx2 0000:85:00.0: eth6: NIC Copper Link is Up, 1000 Mbps full duplex
>bond0: link status definitely up for interface eth6, 1000 Mbps full duplex.
>bnx2 0000:85:00.1: eth7: NIC Copper Link is Up, 1000 Mbps full duplex
>bond0: link status definitely up for interface eth7, 1000 Mbps full duplex.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>8021q: adding VLAN 0 to HW filter on device eth0
>igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>ipmi device interface
>cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
>bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v2.4.1 (Sep 17, 2013)
>netlink: 12 bytes leftover after parsing attributes.
>netlink: 12 bytes leftover after parsing attributes.
>netlink: 12 bytes leftover after parsing attributes.
>netlink: 12 bytes leftover after parsing attributes.
>netlink: 12 bytes leftover after parsing attributes.
>netlink: 12 bytes leftover after parsing attributes.
>bond0: no IPv6 routers present
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>FS-Cache: Loaded
>NFS: Registering the id_resolver key type
>FS-Cache: Netfs 'nfs' registered for caching
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>eth0: no IPv6 routers present
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>usb 6-1: new low speed USB device number 6 using uhci_hcd
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: new low speed USB device number 7 using uhci_hcd
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: new low speed USB device number 8 using uhci_hcd
>usb 6-1: device not accepting address 8, error -71
>usb 6-1: new low speed USB device number 9 using uhci_hcd
>usb 6-1: device not accepting address 9, error -71
>hub 6-0:1.0: unable to enumerate USB device on port 1
>[Hardware Error]: Machine check events logged
>Bridge firewalling registered
>usb 6-1: new low speed USB device number 10 using uhci_hcd
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: new low speed USB device number 11 using uhci_hcd
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: new low speed USB device number 12 using uhci_hcd
>usb 6-1: device not accepting address 12, error -71
>usb 6-1: new low speed USB device number 13 using uhci_hcd
>usb 6-1: device not accepting address 13, error -71
>hub 6-0:1.0: unable to enumerate USB device on port 1
>usb 6-1: new low speed USB device number 14 using uhci_hcd
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: new low speed USB device number 15 using uhci_hcd
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: device descriptor read/64, error -71
>usb 6-1: new low speed USB device number 16 using uhci_hcd
>usb 6-1: device not accepting address 16, error -71
>usb 6-1: new low speed USB device number 17 using uhci_hcd
>usb 6-1: device not accepting address 17, error -71
>hub 6-0:1.0: unable to enumerate USB device on port 1
>general protection fault: 0000 [#1] SMP 
>last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/net/eth0/features
>CPU 2 
>Modules linked in: bridge ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc scsi_tgt ipmi_devintf bonding 8021q garp stp llc rds_rdma rds_tcp rds ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_addr ib_sa ib_mad ib_core xfs exportfs uinput ipv6 tg3 microcode bnx2 iTCO_wdt iTCO_vendor_support igb i2c_algo_bit ptp pps_core sg serio_raw i2c_i801 i2c_core lpc_ich mfd_core ioatdma dca shpchp ext4 jbd2 mbcache sr_mod cdrom firewire_ohci firewire_core crc_itu_t sd_mod crc_t10dif ahci ata_generic pata_acpi pata_jmicron mptsas mptscsih mptbase scsi_transport_sas dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
>
>Pid: 3770, comm: nfsd Not tainted 2.6.32-431.5.1.el6.x86_64 #1 SGI.COM C2108-TY11/X8DAH
>RIP: 0010:[<ffffffffa0620f90>]  [<ffffffffa0620f90>] lru_put_end+0x20/0x50 [nfsd]
>RSP: 0018:ffff880c21ff3d50  EFLAGS: 00010282
>RAX: dead000000200200 RBX: ffff880c239ac000 RCX: ffff880c239ac028
>RDX: dead000000100100 RSI: ffff880bd77e45f8 RDI: ffff880bd77e4608
>RBP: ffff880c21ff3d50 R08: ffff880bd77e4608 R09: 0000000000000000
>R10: 0000000000000000 R11: 0000000000000006 R12: ffff880bd77e45f8
>R13: 0000000000000000 R14: ffff880bd77e45f8 R15: 0000000000000001
>FS:  0000000000000000(0000) GS:ffff880028240000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
>CR2: 000000380ae13828 CR3: 0000000bd02b0000 CR4: 00000000000007e0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process nfsd (pid: 3770, threadinfo ffff880c21ff2000, task ffff880c2b537500)
>Stack:
> ffff880c21ff3dd0 ffffffffa06214a6 ffff880c21ff3d90 ffff880bd77e461c
><d> ffff880c239ac028 00000000e0187d61 032f880c21ff3d90 ffffffffa0647f40
><d> 00000006517b409c 0000000100000004 ffff880c21ff3e90 ffff880c239ac000
>Call Trace:
> [<ffffffffa06214a6>] nfsd_cache_lookup+0x3a6/0x700 [nfsd]
> [<ffffffffa06153e8>] nfsd_dispatch+0xa8/0x230 [nfsd]
> [<ffffffffa050c844>] svc_process_common+0x344/0x640 [sunrpc]
> [<ffffffff81065df0>] ? default_wake_function+0x0/0x20
> [<ffffffffa050ce80>] svc_process+0x110/0x160 [sunrpc]
> [<ffffffffa0615b52>] nfsd+0xc2/0x160 [nfsd]
> [<ffffffffa0615a90>] ? nfsd+0x0/0x160 [nfsd]
> [<ffffffff8109aee6>] kthread+0x96/0xa0
> [<ffffffff8100c20a>] child_rip+0xa/0x20
> [<ffffffff8109ae50>] ? kthread+0x0/0xa0
> [<ffffffff8100c200>] ? child_rip+0x0/0x20
>Code: 66 66 90 48 83 c4 08 5b c9 c3 90 55 48 89 e5 0f 1f 44 00 00 48 8b 05 40 c9 5e e1 48 8b 57 10 48 89 47 58 48 8b 47 18 48 83 c7 10 <48> 89 42 08 48 89 10 48 c7 c2 50 7f 64 a0 48 8b 35 b3 6f 02 00 
>RIP  [<ffffffffa0620f90>] lru_put_end+0x20/0x50 [nfsd]
> RSP <ffff880c21ff3d50>
>crash>

Actions: View

Attachments on bug 1096491: 915899