Attachment 916138 Details for Bug 907193 – smartctl and dmesg output on a HP Proliant g7 amd turion

smartctl and dmesg output on a HP Proliant g7 amd turion

attachment.txt (text/plain), 15.05 KB, created by Adriano on 2014-07-07 17:02:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Adriano

Created: 2014-07-07 17:02:29 UTC

Size: 15.05 KB

patch

obsolete

>Output of smartctl on /dev/sda
>
>smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.14.9-200.fc20.x86_64] (local build)
>Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
>
>=== START OF INFORMATION SECTION ===
>Model Family:     HP 250GB SATA disk VB0250EAVER
>Device Model:     VB0250EAVER
>Serial Number:    Z2AGYTRY
>LU WWN Device Id: 5 000c50 03f64670a
>Firmware Version: HPG7
>User Capacity:    250,059,350,016 bytes [250 GB]
>Sector Size:      512 bytes logical/physical
>Rotation Rate:    7200 rpm
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   ATA8-ACS T13/1699-D revision 6
>SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
>Local Time is:    Mon Jul  7 18:54:32 2014 CEST
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x82)	Offline data collection activity
>					was completed without error.
>					Auto Offline Data Collection: Enabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		(  625) seconds.
>Offline data collection
>capabilities: 			 (0x5b) SMART execute Offline immediate.
>					Auto Offline data collection on/off support.
>					Suspend Offline collection upon new
>					command.
>					Offline surface scan supported.
>					Self-test supported.
>					No Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					General Purpose Logging supported.
>Short self-test routine 
>recommended polling time: 	 (   2) minutes.
>Extended self-test routine
>recommended polling time: 	 (  45) minutes.
>SCT capabilities: 	       (0x1039)	SCT Status supported.
>					SCT Error Recovery Control supported.
>					SCT Feature Control supported.
>					SCT Data Table supported.
>
>SMART Attributes Data Structure revision number: 10
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x002f   117   099   006    Pre-fail  Always       -       121199861
>  3 Spin_Up_Time            0x0023   097   097   000    Pre-fail  Always       -       0
>  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       85
>  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
>  7 Seek_Error_Rate         0x002f   072   060   030    Pre-fail  Always       -       18348253
>  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       20256
> 10 Spin_Retry_Count        0x0033   100   100   097    Pre-fail  Always       -       0
> 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       48
>180 Unknown_HDD_Attribute   0x002b   100   100   000    Pre-fail  Always       -       4253306136
>183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
>184 End-to-End_Error        0x0032   100   100   097    Old_age   Always       -       0
>187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
>188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       28
>189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
>190 Airflow_Temperature_Cel 0x0022   067   058   045    Old_age   Always       -       33 (Min/Max 33/36)
>194 Temperature_Celsius     0x0022   033   042   000    Old_age   Always       -       33 (0 15 0 0 0)
>195 Hardware_ECC_Recovered  0x003a   045   037   000    Old_age   Always       -       121199861
>196 Reallocated_Event_Count 0x0032   100   100   036    Old_age   Always       -       0
>197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
>198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
>199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>No self-tests have been logged.  [To run self-tests, use: smartctl -t]
>
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>
>
>Outputof smartctl on /dev/sdb
>
>smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.14.9-200.fc20.x86_64] (local build)
>Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
>
>=== START OF INFORMATION SECTION ===
>Model Family:     Seagate Barracuda 7200.14 (AF)
>Device Model:     ST500DM002-1BD142
>Serial Number:    Z2AJGCFW
>LU WWN Device Id: 5 000c50 03f92f212
>Firmware Version: KC45
>User Capacity:    500,107,862,016 bytes [500 GB]
>Sector Sizes:     512 bytes logical, 4096 bytes physical
>Rotation Rate:    7200 rpm
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   ATA8-ACS T13/1699-D revision 4
>SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
>Local Time is:    Mon Jul  7 18:54:43 2014 CEST
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x82)	Offline data collection activity
>					was completed without error.
>					Auto Offline Data Collection: Enabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		(  600) seconds.
>Offline data collection
>capabilities: 			 (0x7b) SMART execute Offline immediate.
>					Auto Offline data collection on/off support.
>					Suspend Offline collection upon new
>					command.
>					Offline surface scan supported.
>					Self-test supported.
>					Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					General Purpose Logging supported.
>Short self-test routine 
>recommended polling time: 	 (   1) minutes.
>Extended self-test routine
>recommended polling time: 	 (  82) minutes.
>Conveyance self-test routine
>recommended polling time: 	 (   2) minutes.
>SCT capabilities: 	       (0x303f)	SCT Status supported.
>					SCT Error Recovery Control supported.
>					SCT Feature Control supported.
>					SCT Data Table supported.
>
>SMART Attributes Data Structure revision number: 10
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000f   118   100   006    Pre-fail  Always       -       23568
>  3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       0
>  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       35
>  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
>  7 Seek_Error_Rate         0x000f   100   253   030    Pre-fail  Always       -       858028
>  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       20238
> 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
> 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       46
>183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
>184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
>187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
>188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
>189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
>190 Airflow_Temperature_Cel 0x0022   066   050   045    Old_age   Always       -       34 (Min/Max 34/37)
>194 Temperature_Celsius     0x0022   034   050   000    Old_age   Always       -       34 (0 18 0 0 0)
>195 Hardware_ECC_Recovered  0x001a   025   025   000    Old_age   Always       -       23568
>197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
>198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
>199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
>240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       11710h+33m+14.994s
>241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       118346128
>242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       1759378029
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>No self-tests have been logged.  [To run self-tests, use: smartctl -t]
>
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>
>
>Output od smartctl on /dev/sdc
>
>smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.14.9-200.fc20.x86_64] (local build)
>Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
>
>=== START OF INFORMATION SECTION ===
>Model Family:     Seagate Barracuda 7200.14 (AF)
>Device Model:     ST500DM002-1BD142
>Serial Number:    Z2AJD3QF
>LU WWN Device Id: 5 000c50 03f90e2e1
>Firmware Version: KC45
>User Capacity:    500,107,862,016 bytes [500 GB]
>Sector Sizes:     512 bytes logical, 4096 bytes physical
>Rotation Rate:    7200 rpm
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   ATA8-ACS T13/1699-D revision 4
>SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
>Local Time is:    Mon Jul  7 18:54:48 2014 CEST
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x82)	Offline data collection activity
>					was completed without error.
>					Auto Offline Data Collection: Enabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		(  600) seconds.
>Offline data collection
>capabilities: 			 (0x7b) SMART execute Offline immediate.
>					Auto Offline data collection on/off support.
>					Suspend Offline collection upon new
>					command.
>					Offline surface scan supported.
>					Self-test supported.
>					Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					General Purpose Logging supported.
>Short self-test routine 
>recommended polling time: 	 (   1) minutes.
>Extended self-test routine
>recommended polling time: 	 (  83) minutes.
>Conveyance self-test routine
>recommended polling time: 	 (   2) minutes.
>SCT capabilities: 	       (0x303f)	SCT Status supported.
>					SCT Error Recovery Control supported.
>					SCT Feature Control supported.
>					SCT Data Table supported.
>
>SMART Attributes Data Structure revision number: 10
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000f   104   099   006    Pre-fail  Always       -       45944
>  3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       0
>  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       34
>  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
>  7 Seek_Error_Rate         0x000f   062   060   030    Pre-fail  Always       -       1809829
>  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       20243
> 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
> 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       45
>183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
>184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
>187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
>188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
>189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
>190 Airflow_Temperature_Cel 0x0022   065   049   045    Old_age   Always       -       35 (Min/Max 35/38)
>194 Temperature_Celsius     0x0022   035   051   000    Old_age   Always       -       35 (0 18 0 0 0)
>195 Hardware_ECC_Recovered  0x001a   008   006   000    Old_age   Always       -       45944
>197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
>198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
>199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
>240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       11709h+29m+49.570s
>241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       364794422
>242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       931689961
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>No self-tests have been logged.  [To run self-tests, use: smartctl -t]
>
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>
>
>
>
>Output of dmesg | grep "failed to enable"
>[    2.282599] ata1.00: failed to enable AA (error_mask=0x1)
>[    2.283502] ata1.00: failed to enable AA (error_mask=0x1)

Actions: View

Attachments on bug 907193: 828707 | 828750 | 870267 | 916138