Attachment 916715 Details for Bug 1115997 – libvirtd.conf from host1

libvirtd.conf from host1

hv01-libvirtd.conf (text/plain), 13.57 KB, created by Udayendu Sekhar Kar on 2014-07-09 10:48:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Udayendu Sekhar Kar

Created: 2014-07-09 10:48:22 UTC

Size: 13.57 KB

patch

obsolete

># Master libvirt daemon configuration file
>#
># For further information consult http://libvirt.org/format.html
>#
># NOTE: the tests/daemon-conf regression test script requires
># that each "PARAMETER = VALUE" line in this file have the parameter
># name just after a leading "#".
>
>#################################################################
>#
># Network connectivity controls
>#
>
># Flag listening for secure TLS connections on the public TCP/IP port.
># NB, must pass the --listen flag to the libvirtd process for this to
># have any effect.
>#
># It is necessary to setup a CA and issue server certificates before
># using this capability.
>#
># This is enabled by default, uncomment this to disable it
>#listen_tls = 0
>
># Listen for unencrypted TCP connections on the public TCP/IP port.
># NB, must pass the --listen flag to the libvirtd process for this to
># have any effect.
>#
># Using the TCP socket requires SASL authentication by default. Only
># SASL mechanisms which support data encryption are allowed. This is
># DIGEST_MD5 and GSSAPI (Kerberos5)
>#
># This is disabled by default, uncomment this to enable it.
>#listen_tcp = 1
>
>
>
># Override the port for accepting secure TLS connections
># This can be a port number, or service name
>#
>#tls_port = "16514"
>
># Override the port for accepting insecure TCP connections
># This can be a port number, or service name
>#
>#tcp_port = "16509"
>
>
># Override the default configuration which binds to all network
># interfaces. This can be a numeric IPv4/6 address, or hostname
>#
>#listen_addr = "192.168.0.1"
>
>
># Flag toggling mDNS advertizement of the libvirt service.
>#
># Alternatively can disable for all services on a host by
># stopping the Avahi daemon
>#
># This is disabled by default, uncomment this to enable it
>#mdns_adv = 1
>
># Override the default mDNS advertizement name. This must be
># unique on the immediate broadcast network.
>#
># The default is "Virtualization Host HOSTNAME", where HOSTNAME
># is subsituted for the short hostname of the machine (without domain)
>#
>#mdns_name = "Virtualization Host Joe Demo"
>
>
>#################################################################
>#
># UNIX socket access controls
>#
>
># Set the UNIX domain socket group ownership. This can be used to
># allow a 'trusted' set of users access to management capabilities
># without becoming root.
>#
># This is restricted to 'root' by default.
>#unix_sock_group = "libvirt"
>
># Set the UNIX socket permissions for the R/O socket. This is used
># for monitoring VM status only
>#
># Default allows any user. If setting group ownership may want to
># restrict this to:
>#unix_sock_ro_perms = "0777"
>
># Set the UNIX socket permissions for the R/W socket. This is used
># for full management of VMs
>#
># Default allows only root. If PolicyKit is enabled on the socket,
># the default will change to allow everyone (eg, 0777)
>#
># If not using PolicyKit and setting group ownership for access
># control then you may want to relax this to:
>#unix_sock_rw_perms = "0770"
>
># Set the name of the directory in which sockets will be found/created.
>#unix_sock_dir = "/var/run/libvirt"
>
>#################################################################
>#
># Authentication.
>#
>#  - none: do not perform auth checks. If you can connect to the
>#          socket you are allowed. This is suitable if there are
>#          restrictions on connecting to the socket (eg, UNIX
>#          socket permissions), or if there is a lower layer in
>#          the network providing auth (eg, TLS/x509 certificates)
>#
>#  - sasl: use SASL infrastructure. The actual auth scheme is then
>#          controlled from /etc/sasl2/libvirt.conf. For the TCP
>#          socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
>#          For non-TCP or TLS sockets,  any scheme is allowed.
>#
>#  - polkit: use PolicyKit to authenticate. This is only suitable
>#            for use on the UNIX sockets. The default policy will
>#            require a user to supply their own password to gain
>#            full read/write access (aka sudo like), while anyone
>#            is allowed read/only access.
>#
># Set an authentication scheme for UNIX read-only sockets
># By default socket permissions allow anyone to connect
>#
># To restrict monitoring of domains you may wish to enable
># an authentication mechanism here
>#auth_unix_ro = "none"
>
># Set an authentication scheme for UNIX read-write sockets
># By default socket permissions only allow root. If PolicyKit
># support was compiled into libvirt, the default will be to
># use 'polkit' auth.
>#
># If the unix_sock_rw_perms are changed you may wish to enable
># an authentication mechanism here
>#auth_unix_rw = "none"
>
># Change the authentication scheme for TCP sockets.
>#
># If you don't enable SASL, then all TCP traffic is cleartext.
># Don't do this outside of a dev/test scenario. For real world
># use, always enable SASL and use the GSSAPI or DIGEST-MD5
># mechanism in /etc/sasl2/libvirt.conf
>#auth_tcp = "sasl"
>
># Change the authentication scheme for TLS sockets.
>#
># TLS sockets already have encryption provided by the TLS
># layer, and limited authentication is done by certificates
>#
># It is possible to make use of any SASL authentication
># mechanism as well, by using 'sasl' for this option
>#auth_tls = "none"
>
>
>
>#################################################################
>#
># TLS x509 certificate configuration
>#
>
>
># Override the default server key file path
>#
>#key_file = "/etc/pki/libvirt/private/serverkey.pem"
>
># Override the default server certificate file path
>#
>#cert_file = "/etc/pki/libvirt/servercert.pem"
>
># Override the default CA certificate path
>#
>#ca_file = "/etc/pki/CA/cacert.pem"
>
># Specify a certificate revocation list.
>#
># Defaults to not using a CRL, uncomment to enable it
>#crl_file = "/etc/pki/CA/crl.pem"
>
>
>
>#################################################################
>#
># Authorization controls
>#
>
>
># Flag to disable verification of our own server certificates
>#
># When libvirtd starts it performs some sanity checks against
># its own certificates.
>#
># Default is to always run sanity checks. Uncommenting this
># will disable sanity checks which is not a good idea
>#tls_no_sanity_certificate = 1
>
># Flag to disable verification of client certificates
>#
># Client certificate verification is the primary authentication mechanism.
># Any client which does not present a certificate signed by the CA
># will be rejected.
>#
># Default is to always verify. Uncommenting this will disable
># verification - make sure an IP whitelist is set
>#tls_no_verify_certificate = 1
>
>
># A whitelist of allowed x509  Distinguished Names
># This list may contain wildcards such as
>#
>#    "C=GB,ST=London,L=London,O=Red Hat,CN=*"
>#
># See the POSIX fnmatch function for the format of the wildcards.
>#
># NB If this is an empty list, no client can connect, so comment out
># entirely rather than using empty list to disable these checks
>#
># By default, no DN's are checked
>#tls_allowed_dn_list = ["DN1", "DN2"]
>
>
># A whitelist of allowed SASL usernames. The format for usernames
># depends on the SASL authentication mechanism. Kerberos usernames
># look like username@REALM
>#
># This list may contain wildcards such as
>#
>#    "*@EXAMPLE.COM"
>#
># See the POSIX fnmatch function for the format of the wildcards.
>#
># NB If this is an empty list, no client can connect, so comment out
># entirely rather than using empty list to disable these checks
>#
># By default, no Username's are checked
>#sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM" ]
>
>
>
>#################################################################
>#
># Processing controls
>#
>
># The maximum number of concurrent client connections to allow
># over all sockets combined.
>#max_clients = 20
>
>
># The minimum limit sets the number of workers to start up
># initially. If the number of active clients exceeds this,
># then more threads are spawned, upto max_workers limit.
># Typically you'd want max_workers to equal maximum number
># of clients allowed
>#min_workers = 5
>#max_workers = 20
>
>
># The number of priority workers. If all workers from above
># pool will stuck, some calls marked as high priority
># (notably domainDestroy) can be executed in this pool.
>#prio_workers = 5
>
># Total global limit on concurrent RPC calls. Should be
># at least as large as max_workers. Beyond this, RPC requests
># will be read into memory and queued. This directly impact
># memory usage, currently each request requires 256 KB of
># memory. So by default upto 5 MB of memory is used
>#
># XXX this isn't actually enforced yet, only the per-client
># limit is used so far
>#max_requests = 20
>
># Limit on concurrent requests from a single client
># connection. To avoid one client monopolizing the server
># this should be a small fraction of the global max_requests
># and max_workers parameter
>#max_client_requests = 5
>
>#################################################################
>#
># Logging controls
>#
>
># Logging level: 4 errors, 3 warnings, 2 information, 1 debug
># basically 1 will log everything possible
>#log_level = 3
>
># Logging filters:
># A filter allows to select a different logging level for a given category
># of logs
># The format for a filter is one of:
>#    x:name
>#    x:+name
>#      where name is a string which is matched against source file name,
>#      e.g., "remote", "qemu", or "util/json", the optional "+" prefix
>#      tells libvirt to log stack trace for each message matching name,
>#      and x is the minimal level where matching messages should be logged:
>#    1: DEBUG
>#    2: INFO
>#    3: WARNING
>#    4: ERROR
>#
># Multiple filter can be defined in a single @filters, they just need to be
># separated by spaces.
>#
># e.g. to only get warning or errors from the remote layer and only errors
># from the event layer:
>#log_filters="3:remote 4:event"
>
># Logging outputs:
># An output is one of the places to save logging information
># The format for an output can be:
>#    x:stderr
>#      output goes to stderr
>#    x:syslog:name
>#      use syslog for the output and use the given name as the ident
>#    x:file:file_path
>#      output to a file, with the given filepath
># In all case the x prefix is the minimal level, acting as a filter
>#    1: DEBUG
>#    2: INFO
>#    3: WARNING
>#    4: ERROR
>#
># Multiple output can be defined, they just need to be separated by spaces.
># e.g. to log all warnings and errors to syslog under the libvirtd ident:
>#log_outputs="3:syslog:libvirtd"
>#
>
># Log debug buffer size: default 64
># The daemon keeps an internal debug log buffer which will be dumped in case
># of crash or upon receiving a SIGUSR2 signal. This setting allows to override
># the default buffer size in kilobytes.
># If value is 0 or less the debug log buffer is deactivated
>#log_buffer_size = 64
>
>
>##################################################################
>#
># Auditing
>#
># This setting allows usage of the auditing subsystem to be altered:
>#
>#   audit_level == 0  -> disable all auditing
>#   audit_level == 1  -> enable auditing, only if enabled on host (default)
>#   audit_level == 2  -> enable auditing, and exit if disabled on host
>#
>#audit_level = 2
>#
># If set to 1, then audit messages will also be sent
># via libvirt logging infrastructure. Defaults to 0
>#
>#audit_logging = 1
>
>###################################################################
># UUID of the host:
># Provide the UUID of the host here in case the command
># 'dmidecode -s system-uuid' does not provide a valid uuid. In case
># 'dmidecode' does not provide a valid UUID and none is provided here, a
># temporary UUID will be generated.
># Keep the format of the example UUID below. UUID must not have all digits
># be the same.
>
># NB This default all-zeros UUID will not work. Replace
># it with the output of the 'uuidgen' command and then
># uncomment this entry
>#host_uuid = "00000000-0000-0000-0000-000000000000"
>
>###################################################################
># Keepalive protocol:
># This allows libvirtd to detect broken client connections or even
># dead client.  A keepalive message is sent to a client after
># keepalive_interval seconds of inactivity to check if the client is
># still responding; keepalive_count is a maximum number of keepalive
># messages that are allowed to be sent to the client without getting
># any response before the connection is considered broken.  In other
># words, the connection is automatically closed approximately after
># keepalive_interval * (keepalive_count + 1) seconds since the last
># message received from the client.  If keepalive_interval is set to
># -1, libvirtd will never send keepalive requests; however clients
># can still send them and the deamon will send responses.  When
># keepalive_count is set to 0, connections will be automatically
># closed after keepalive_interval seconds of inactivity without
># sending any keepalive messages.
>#
>#keepalive_interval = 5
>#keepalive_count = 5
>#
># If set to 1, libvirtd will refuse to talk to clients that do not
># support keepalive protocol.  Defaults to 0.
>#
>#keepalive_required = 1
>## beginning of configuration section by vdsm-4.10.2
>listen_addr="0.0.0.0"
>unix_sock_group="kvm"
>unix_sock_rw_perms="0770"
>auth_unix_rw="sasl"
>host_uuid="66bf6d35-edb3-4f32-9c98-216516dcc184"
>keepalive_interval=-1
>log_outputs="1:file:/var/log/libvirtd.log"
>ca_file="/etc/pki/vdsm/certs/cacert.pem"
>cert_file="/etc/pki/vdsm/certs/vdsmcert.pem"
>key_file="/etc/pki/vdsm/keys/vdsmkey.pem"
>## end of configuration section by vdsm-4.10.2
>## beginning of configuration section by vdsm-4.13.0
>## end of configuration section by vdsm-4.13.0
>## beginning of configuration section by vdsm-4.13.0
>## end of configuration section by vdsm-4.13.0
>## beginning of configuration section by vdsm-4.13.0
>## end of configuration section by vdsm-4.13.0
>## beginning of configuration section by vdsm-4.13.0
>## end of configuration section by vdsm-4.13.0
>## beginning of configuration section by vdsm-4.13.0
>## end of configuration section by vdsm-4.13.0

Actions: View

Attachments on bug 1115997: 916715 | 916716 | 930575 | 930576