Attachment 919641 Details for Bug 1121668 – smartctl on /dev/sdb

smartctl on /dev/sdb

smartctl.output.sdb.txt (text/plain), 5.09 KB, created by Adriano on 2014-07-21 14:34:08 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Adriano

Created: 2014-07-21 14:34:08 UTC

Size: 5.09 KB

patch

obsolete

>smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.14.9-200.fc20.x86_64] (local build)
>Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
>
>=== START OF INFORMATION SECTION ===
>Model Family:     Seagate Barracuda 7200.14 (AF)
>Device Model:     ST500DM002-1BD142
>Serial Number:    Z2AJGCFW
>LU WWN Device Id: 5 000c50 03f92f212
>Firmware Version: KC45
>User Capacity:    500,107,862,016 bytes [500 GB]
>Sector Sizes:     512 bytes logical, 4096 bytes physical
>Rotation Rate:    7200 rpm
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   ATA8-ACS T13/1699-D revision 4
>SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
>Local Time is:    Sat Jul 12 16:41:36 2014 CEST
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x82)	Offline data collection activity
>					was completed without error.
>					Auto Offline Data Collection: Enabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		(  600) seconds.
>Offline data collection
>capabilities: 			 (0x7b) SMART execute Offline immediate.
>					Auto Offline data collection on/off support.
>					Suspend Offline collection upon new
>					command.
>					Offline surface scan supported.
>					Self-test supported.
>					Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					General Purpose Logging supported.
>Short self-test routine 
>recommended polling time: 	 (   1) minutes.
>Extended self-test routine
>recommended polling time: 	 (  82) minutes.
>Conveyance self-test routine
>recommended polling time: 	 (   2) minutes.
>SCT capabilities: 	       (0x303f)	SCT Status supported.
>					SCT Error Recovery Control supported.
>					SCT Feature Control supported.
>					SCT Data Table supported.
>
>SMART Attributes Data Structure revision number: 10
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000f   118   100   006    Pre-fail  Always       -       31816
>  3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       0
>  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       35
>  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
>  7 Seek_Error_Rate         0x000f   100   253   030    Pre-fail  Always       -       861943
>  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       20356
> 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
> 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       46
>183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
>184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
>187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
>188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
>189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
>190 Airflow_Temperature_Cel 0x0022   061   050   045    Old_age   Always       -       39 (Min/Max 33/40)
>194 Temperature_Celsius     0x0022   039   050   000    Old_age   Always       -       39 (0 18 0 0 0)
>195 Hardware_ECC_Recovered  0x001a   025   025   000    Old_age   Always       -       31816
>197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
>198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
>199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
>240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       11828h+20m+51.255s
>241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       118346160
>242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       1759378101
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>No self-tests have been logged.  [To run self-tests, use: smartctl -t]
>
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>

Actions: View

Attachments on bug 1121668: 919639 | 919640 | 919641 | 919642 | 922475 | 922476 | 922477 | 922478