Attachment 921461 Details for Bug 1123638 – Slic3r Configuration file for this crash

Slic3r Configuration file for this crash

config_1.ini (text/plain), 2.99 KB, created by boucaron on 2014-07-27 12:58:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: boucaron

Created: 2014-07-27 12:58:25 UTC

Size: 2.99 KB

patch

obsolete

># generated by Slic3r 1.0.1 on Sun Jul 27 13:43:04 2014
>avoid_crossing_perimeters = 1
>bed_size = 200,200
>bed_temperature = 50
>bottom_solid_layers = 3
>bridge_acceleration = 0
>bridge_fan_speed = 100
>bridge_flow_ratio = 1
>bridge_speed = 60
>brim_width = 0
>complete_objects = 0
>cooling = 1
>default_acceleration = 0
>disable_fan_first_layers = 1
>duplicate = 1
>duplicate_distance = 6
>duplicate_grid = 1,1
>end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
>external_perimeter_speed = 70%
>external_perimeters_first = 0
>extra_perimeters = 1
>extruder_clearance_height = 20
>extruder_clearance_radius = 20
>extruder_offset = 0x0
>extrusion_axis = E
>extrusion_multiplier = 1
>extrusion_width = 0
>fan_always_on = 0
>fan_below_layer_time = 60
>filament_diameter = 3
>fill_angle = 45
>fill_density = 0.3
>fill_pattern = rectilinear
>first_layer_acceleration = 0
>first_layer_bed_temperature = 50
>first_layer_extrusion_width = 200%
>first_layer_height = 0.5
>first_layer_speed = 30%
>first_layer_temperature = 190
>g0 = 0
>gap_fill_speed = 20
>gcode_arcs = 0
>gcode_comments = 0
>gcode_flavor = reprap
>infill_acceleration = 0
>infill_every_layers = 10
>infill_extruder = 1
>infill_extrusion_width = 0
>infill_first = 0
>infill_only_where_needed = 0
>infill_speed = 80
>layer_gcode = 
>layer_height = 0.3
>max_fan_speed = 100
>min_fan_speed = 35
>min_print_speed = 10
>min_skirt_length = 0
>notes = 
>nozzle_diameter = 0.5
>only_retract_when_crossing_perimeters = 1
>ooze_prevention = 0
>output_filename_format = [input_filename_base].gcode
>overhangs = 1
>perimeter_acceleration = 0
>perimeter_extruder = 1
>perimeter_extrusion_width = 0
>perimeter_speed = 50
>perimeters = 3
>post_process = 
>print_center = 100,100
>raft_layers = 0
>randomize_start = 0
>resolution = 0
>retract_before_travel = 2
>retract_layer_change = 1
>retract_length = 4
>retract_length_toolchange = 10
>retract_lift = 0.0
>retract_restart_extra = 0
>retract_restart_extra_toolchange = 0
>retract_speed = 30
>rotate = 0
>scale = 1
>skirt_distance = 6
>skirt_height = 1
>skirts = 1
>slowdown_below_layer_time = 30
>small_perimeter_speed = 30
>solid_fill_pattern = rectilinear
>solid_infill_below_area = 70
>solid_infill_every_layers = 0
>solid_infill_extrusion_width = 0
>solid_infill_speed = 60
>spiral_vase = 0
>standby_temperature_delta = -5
>start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle
>start_perimeters_at_concave_points = 0
>start_perimeters_at_non_overhang = 0
>support_material = 0
>support_material_angle = 0
>support_material_enforce_layers = 0
>support_material_extruder = 1
>support_material_extrusion_width = 0
>support_material_interface_extruder = 1
>support_material_interface_layers = 3
>support_material_interface_spacing = 0
>support_material_pattern = honeycomb
>support_material_spacing = 2.5
>support_material_speed = 60
>support_material_threshold = 0
>temperature = 190
>thin_walls = 1
>threads = 2
>toolchange_gcode = 
>top_infill_extrusion_width = 0
>top_solid_infill_speed = 50
>top_solid_layers = 3
>travel_speed = 150
>use_firmware_retraction = 0
>use_relative_e_distances = 0
>vibration_limit = 0
>wipe = 0
>z_offset = 0

Actions: View

Attachments on bug 1123638: 921459 | 921460 | 921461