Attachment 922477 Details for Bug 1121668 – smartctl on /dev/sdc

smartctl on /dev/sdc

sdc.txt (text/plain), 5.05 KB, created by Fabio Cecamore on 2014-07-30 09:47:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Fabio Cecamore

Created: 2014-07-30 09:47:23 UTC

Size: 5.05 KB

patch

obsolete

>smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
>Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>
>=== START OF INFORMATION SECTION ===
>Device Model:     WDC WD20EZRX-00D8PB0
>Serial Number:    WD-WMC4M0066095
>LU WWN Device Id: 5 0014ee 60388c57c
>Firmware Version: 80.00A80
>User Capacity:    2,000,398,934,016 bytes [2,00 TB]
>Sector Sizes:     512 bytes logical, 4096 bytes physical
>Device is:        Not in smartctl database [for details use: -P showall]
>ATA Version is:   9
>ATA Standard is:  Exact ATA specification draft version not indicated
>Local Time is:    Wed Jul 30 11:45:41 2014 CEST
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x82) Offline data collection activity
>                                        was completed without error.
>                                        Auto Offline Data Collection: Enabled.
>Self-test execution status:      (   0) The previous self-test routine completed
>                                        without error or no self-test has ever
>                                        been run.
>Total time to complete Offline
>data collection:                (25800) seconds.
>Offline data collection
>capabilities:                    (0x7b) SMART execute Offline immediate.
>                                        Auto Offline data collection on/off support.
>                                        Suspend Offline collection upon new
>                                        command.
>                                        Offline surface scan supported.
>                                        Self-test supported.
>                                        Conveyance Self-test supported.
>                                        Selective Self-test supported.
>SMART capabilities:            (0x0003) Saves SMART data before entering
>                                        power-saving mode.
>                                        Supports SMART auto save timer.
>Error logging capability:        (0x01) Error logging supported.
>                                        General Purpose Logging supported.
>Short self-test routine
>recommended polling time:        (   2) minutes.
>Extended self-test routine
>recommended polling time:        ( 255) minutes.
>Conveyance self-test routine
>recommended polling time:        (   5) minutes.
>SCT capabilities:              (0x7035) SCT Status supported.
>                                        SCT Feature Control supported.
>                                        SCT Data Table supported.
>
>SMART Attributes Data Structure revision number: 16
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
>  3 Spin_Up_Time            0x0027   174   172   021    Pre-fail  Always       -       4258
>  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       44
>  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
>  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
>  9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       6974
> 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
> 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
> 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       44
>192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       1
>193 Load_Cycle_Count        0x0032   197   197   000    Old_age   Always       -       10796
>194 Temperature_Celsius     0x0022   115   111   000    Old_age   Always       -       32
>196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
>197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
>198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
>199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
>200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>No self-tests have been logged.  [To run self-tests, use: smartctl -t]
>
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.

Actions: View

Attachments on bug 1121668: 919639 | 919640 | 919641 | 919642 | 922475 | 922476 | 922477 | 922478