Attachment 923141 Details for Bug 1125833 – snmpd.conf.sample

snmpd.conf.sample

snmpd.conf.sample (text/plain), 5.73 KB, created by Jan Stefl on 2014-08-01 07:59:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jan Stefl

Created: 2014-08-01 07:59:00 UTC

Size: 5.73 KB

patch

obsolete

>###############################################################################
>#
># Apache SNMP configuration file.
>#
># This file is used to configure the Apache SNMP agent. 
>#
># All lines beginning with a '#' are comments and are intended for you
># to read.  All other lines are configuration commands for the agent.
>#
># For more information, please refer to the snmpd.conf entry in the 
># in the command reference section of the manual.
>#
>###############################################################################
># Network Setup
>###############################################################################
># agentaddress
>#
># SYNTAX: 
>#    agentaddress [(udp|tcp):]port[@address][,...] 
># DESCRIPTION: 
>#    This directive specifies the port(s) and optional address the SNMP agent
>#    will listen on. Multiple ports can be separated by commas. Transports can
>#    be specified by prepending the port number with the transport name ("udp"
>#    or "tcp") followed by a colon. To bind to a particular interface, you can
>#    specify the address (@address) you want it to bind with.
># EXAMPLE:
>#	  agentaddress 8161,tcp:8161,9161@localhost 
>#    Directs the agent to listen on udp port 8161 for any address, tcp port
>#    8161 for any address, and udp port 9161 on only the interface associated
>#    with the localhost address.
># DEFAULT:
>#	  agentaddress 161 
>
>agentaddress 1610
>
>###############################################################################
># View-based Access Control
>###############################################################################
># This section explains on how to configure the View Based Access Control.
>#
># If you want SNMPv1 and/or SNMPv2c access, you need to map
># the community name into a security name.
># SYNTAX:
>#	com2sec <SECNAME> <NETWORK> <COMMUNITY>
># <SECNAME> is used as user within the SNMP agent.
># <NETWORK> is used to defined from which hosts or networks
>#	the SNMP agent can be accessed by using the associated
>#	community string.
># <COMMUNITY> is the community string as used in SNMPv1 and SNMPv2c
>#	for authentication.
>
>com2sec local     localhost        public
>#@@ENABLESNMPV12@@com2sec mynetwork @@SNMPNETWORK@@  public
>
>####
># You need to map the <SECNAME>'s into one or multiple groups
># and associate a security model to it.
># SYNTAX:
>#	group <GROUPNAME> <SECMODEL> <SECNAME>
># <GROUPNAME> is the identification of the group.
># <SECMODEL> is the security model used. The agent
># 	uses: 'v1', 'v2c', 'usm' or 'any'
># <SECNAME> is the name via which SNMPv1 and SNMPv2c
>#	have access or the 'username' of SNMPv3
>
>group MyRWGroup v1         local
>group MyRWGroup v2c        local
>#@@ENABLESNMPV12@@group MyROGroup v1         mynetwork
>#@@ENABLESNMPV12@@group MyROGroup v2c        mynetwork
>
>####
># You need to create a view of the MIB that can either be a
># complete or partial view.
># SYNTAX:
>#	view <VIEWNAME> <TYPE> <SUBTREE> <MASK>
># <VIEWNAME> identification for a MIB view.
># <TYPE> is either 'included' or 'excluded' and perform
>#	the associated action on the <SUBTREE>
># <SUBTREE> the MIB subtree to which the view applies.
># <MASK> is on the places in the OID-string for the accessed objects that
>#	must be match to included in this view.
>
>view all    included  .1   80
>
>####
># Grant each group access and define its permissions.
># SYNTAX:
>#	access <GROUPNAME> <CONTEXT> <SECMODEL> <SECLEVEL> <MATCH> <READ> <WRITE> <NOTIFY>
># <GROUPNAME> the group identification as defined with 'group'.
># <CONTEXT> the context in which access is granted. Default ""
># <SECMODEL> the security model required to be used for access
>#       The agent uses: 'v1', 'v2c', 'usm' or 'any'
># <SECLEVEL> The security level used for access to the MIB. The agent
>#	uses: 'noauth', 'auth'  or 'priv'
># <MATCH> specifies how CONTEXT should be matched against the
>#	context of the incoming pdu, either exact or prefix.
># <READ> specificies the view for corresponding access.
># <WRITE> specificies the view for corresponding access.
># <NOTIFY> specificies the view for corresponding access.
>access MyROGroup ""      any       noauth    exact  all    none   none
>access MyRWGroup ""      any       noauth    exact  all    all    none
>
>###############################################################################
># User-based Security
>###############################################################################
># For SNMPv3 you need to create users. However, after starting and stopping
># you would like to delete the 'createuser' line. The SNMP agent will store
># this information encrypted, in a persistent configuration file.
>#
># We first want to create or map the SNMPv3 user into a group and provide
># access with the above view-based access control.
># Forinstance, group MyRWGroup usm engineering
>
>#group MyRWGroup usm @@SNMPV3USERNAME@@
>
># For SNMPv3 (User-based Security) we need create a user.
># SYNTAX:
>#	createUser <USERNAME> <MD5/SHA> <MD5PASSPHRASE> [DES] <PASSPHRASE>
># <USERNAME> the SNMPv3 user name. Maps in to view-based access
>#	control on the <SECNAME>
># <MD5/SHA> type of authentication
># <MD5PASSPHRASE> the MD5 or SHA passphrase.
># <DES> the privacy protocol 
># <DESPASSPHRASE> the privacy passphrase.
># Your passphrases must be at least 8 characters long!
>
>#createUser @@SNMPV3USERNAME@@ MD5 @@SNMPV3PASSWORD@@ DES
>
># NOTE: If you have used the installer that was provided with
># You probably have already created the user '@@SNMPV3USERNAME@@'. 
># This was done if you were asked for an SNMPv3 password.
>###############################################################################
># System group information
># 
># One can define some values to be returned for the system group.
># 'sysLocation' where the system is located.
># SYNTAX:
>#	syslocation <STRING>
># 'sysContact' for this system.
># SYNTAX:
>#	syscontact <STRING>
>
>syscontact Webmaster <webmaster@your.domain>
>syslocation Apache Server

Actions: View

Attachments on bug 1125833: 923141