Attachment 929415 Details for Bug 1132765 – vmcore-dmesg.txt

vmcore-dmesg.txt

vmcore-dmesg.txt (text/plain), 222.62 KB, created by mazhang on 2014-08-22 03:24:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: mazhang

Created: 2014-08-22 03:24:24 UTC

Size: 222.62 KB

patch

obsolete

><6>Initializing cgroup subsys cpuset
><6>Initializing cgroup subsys cpu
><5>Linux version 2.6.32-497.el6.x86_64 (mockbuild@x86-023.build.eng.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-10) (GCC) ) #1 SMP Fri Aug 15 17:13:42 EDT 2014
><6>Command line: ro root=/dev/mapper/vg_vm0-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_vm0/lv_root rd_LVM_LV=vg_vm0/lv_swap  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
><6>KERNEL supported cpus:
><6>  Intel GenuineIntel
><6>  AMD AuthenticAMD
><6>  Centaur CentaurHauls
><6>Disabled fast string operations
><6>BIOS-provided physical RAM map:
><6> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
><6> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
><6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
><6> BIOS-e820: 0000000000100000 - 000000007fff7000 (usable)
><6> BIOS-e820: 000000007fff7000 - 0000000080000000 (reserved)
><6> BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
><6>DMI 2.4 present.
><4>SMBIOS version 2.4 @ 0xFD400
><7>DMI: Red Hat RHEV Hypervisor, BIOS 0.5.1 01/01/2007
><6>Hypervisor detected: KVM
><7>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
><7>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
><6>last_pfn = 0x7fff7 max_arch_pfn = 0x400000000
><7>MTRR default type: write-back
><7>MTRR fixed ranges enabled:
><7>  00000-9FFFF write-back
><7>  A0000-BFFFF uncachable
><7>  C0000-FFFFF write-protect
><7>MTRR variable ranges enabled:
><7>  0 base 0E0000000 mask FE0000000 uncachable
><7>  1 disabled
><7>  2 disabled
><7>  3 disabled
><7>  4 disabled
><7>  5 disabled
><7>  6 disabled
><7>  7 disabled
><6>x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
><7>initial memory mapped : 0 - 20000000
><6>init_memory_mapping: 0000000000000000-000000007fff7000
><7> 0000000000 - 007fe00000 page 2M
><7> 007fe00000 - 007fff7000 page 4k
><7>kernel direct mapping tables up to 7fff7000 @ 8000-c000
><6>RAMDISK: 36d60000 - 37fef44b
><4>ACPI: RSDP 00000000000fd3d0 00014 (v00 BOCHS )
><4>ACPI: RSDT 000000007fff7940 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
><4>ACPI: FACP 000000007fffe250 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
><4>ACPI: DSDT 000000007fffbd50 024A2 (v01   BXPC   BXDSDT 00000001 INTL 20090123)
><4>ACPI: FACS 000000007fffe200 00040
><4>ACPI: SSDT 000000007fff8070 03CDD (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
><4>ACPI: APIC 000000007fff7a90 00570 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
><4>ACPI: SSDT 000000007fff7980 0010F (v01   BXPC BXSSDTPC 00000001 INTL 20090123)
><7>ACPI: Local APIC address 0xfee00000
><6>Setting APIC routing to flat.
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-000000007fff7000
><6>Bootmem setup node 0 0000000000000000-000000007fff7000
><6>  NODE_DATA [000000000000a000 - 000000000003dfff]
><6>  bootmap [000000000003e000 -  000000000004dfff] pages 10
><6>(7 early reservations) ==> bootmem [0000000000 - 007fff7000]
><6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
><6>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
><6>  #2 [0001000000 - 0002029ba4]    TEXT DATA BSS ==> [0001000000 - 0002029ba4]
><6>  #3 [0036d60000 - 0037fef44b]          RAMDISK ==> [0036d60000 - 0037fef44b]
><6>  #4 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
><6>  #5 [000202a000 - 000202a0ad]              BRK ==> [000202a000 - 000202a0ad]
><6>  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
><6>found SMP MP-table at [ffff8800000fd420] fd420
><6>Reserving 128MB of memory at 48MB for crashkernel (System RAM: 2047MB)
><6>kvm-clock: Using msrs 4b564d01 and 4b564d00
><6>kvm-clock: cpu 0, msr 0:1c27841, boot clock
><7> [ffffea0000000000-ffffea00009fffff] PMD -> [ffff880002600000-ffff880002ffffff] on node 0
><7> [ffffea0000a00000-ffffea0001bfffff] PMD -> [ffff88000b000000-ffff88000c1fffff] on node 0
><4>Zone PFN ranges:
><4>  DMA      0x00000001 -> 0x00001000
><4>  DMA32    0x00001000 -> 0x00100000
><4>  Normal   0x00100000 -> 0x00100000
><4>Movable zone start PFN for each node
><4>early_node_map[2] active PFN ranges
><4>    0: 0x00000001 -> 0x0000009d
><4>    0: 0x00000100 -> 0x0007fff7
><7>On node 0 totalpages: 524179
><7>  DMA zone: 56 pages used for memmap
><7>  DMA zone: 103 pages reserved
><7>  DMA zone: 3837 pages, LIFO batch:0
><7>  DMA32 zone: 7112 pages used for memmap
><7>  DMA32 zone: 513071 pages, LIFO batch:31
><6>ACPI: PM-Timer IO Port: 0xb008
><7>ACPI: Local APIC address 0xfee00000
><6>Setting APIC routing to flat.
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
><6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
><6>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
><6>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
><6>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
><6>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
><6>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
><6>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
><6>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
><6>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
><6>ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
><6>ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
><6>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
><6>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
><6>ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] disabled)
><6>ACPI: LAPIC (acpi_id[0x11] lapic_id[0x11] disabled)
><6>ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] disabled)
><6>ACPI: LAPIC (acpi_id[0x13] lapic_id[0x13] disabled)
><6>ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] disabled)
><6>ACPI: LAPIC (acpi_id[0x15] lapic_id[0x15] disabled)
><6>ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] disabled)
><6>ACPI: LAPIC (acpi_id[0x17] lapic_id[0x17] disabled)
><6>ACPI: LAPIC (acpi_id[0x18] lapic_id[0x18] disabled)
><6>ACPI: LAPIC (acpi_id[0x19] lapic_id[0x19] disabled)
><6>ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1a] disabled)
><6>ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1b] disabled)
><6>ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1c] disabled)
><6>ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1d] disabled)
><6>ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1e] disabled)
><6>ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1f] disabled)
><6>ACPI: LAPIC (acpi_id[0x20] lapic_id[0x20] disabled)
><6>ACPI: LAPIC (acpi_id[0x21] lapic_id[0x21] disabled)
><6>ACPI: LAPIC (acpi_id[0x22] lapic_id[0x22] disabled)
><6>ACPI: LAPIC (acpi_id[0x23] lapic_id[0x23] disabled)
><6>ACPI: LAPIC (acpi_id[0x24] lapic_id[0x24] disabled)
><6>ACPI: LAPIC (acpi_id[0x25] lapic_id[0x25] disabled)
><6>ACPI: LAPIC (acpi_id[0x26] lapic_id[0x26] disabled)
><6>ACPI: LAPIC (acpi_id[0x27] lapic_id[0x27] disabled)
><6>ACPI: LAPIC (acpi_id[0x28] lapic_id[0x28] disabled)
><6>ACPI: LAPIC (acpi_id[0x29] lapic_id[0x29] disabled)
><6>ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x2a] disabled)
><6>ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x2b] disabled)
><6>ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x2c] disabled)
><6>ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x2d] disabled)
><6>ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x2e] disabled)
><6>ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x2f] disabled)
><6>ACPI: LAPIC (acpi_id[0x30] lapic_id[0x30] disabled)
><6>ACPI: LAPIC (acpi_id[0x31] lapic_id[0x31] disabled)
><6>ACPI: LAPIC (acpi_id[0x32] lapic_id[0x32] disabled)
><6>ACPI: LAPIC (acpi_id[0x33] lapic_id[0x33] disabled)
><6>ACPI: LAPIC (acpi_id[0x34] lapic_id[0x34] disabled)
><6>ACPI: LAPIC (acpi_id[0x35] lapic_id[0x35] disabled)
><6>ACPI: LAPIC (acpi_id[0x36] lapic_id[0x36] disabled)
><6>ACPI: LAPIC (acpi_id[0x37] lapic_id[0x37] disabled)
><6>ACPI: LAPIC (acpi_id[0x38] lapic_id[0x38] disabled)
><6>ACPI: LAPIC (acpi_id[0x39] lapic_id[0x39] disabled)
><6>ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x3a] disabled)
><6>ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x3b] disabled)
><6>ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x3c] disabled)
><6>ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x3d] disabled)
><6>ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x3e] disabled)
><6>ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x3f] disabled)
><6>ACPI: LAPIC (acpi_id[0x40] lapic_id[0x40] disabled)
><6>ACPI: LAPIC (acpi_id[0x41] lapic_id[0x41] disabled)
><6>ACPI: LAPIC (acpi_id[0x42] lapic_id[0x42] disabled)
><6>ACPI: LAPIC (acpi_id[0x43] lapic_id[0x43] disabled)
><6>ACPI: LAPIC (acpi_id[0x44] lapic_id[0x44] disabled)
><6>ACPI: LAPIC (acpi_id[0x45] lapic_id[0x45] disabled)
><6>ACPI: LAPIC (acpi_id[0x46] lapic_id[0x46] disabled)
><6>ACPI: LAPIC (acpi_id[0x47] lapic_id[0x47] disabled)
><6>ACPI: LAPIC (acpi_id[0x48] lapic_id[0x48] disabled)
><6>ACPI: LAPIC (acpi_id[0x49] lapic_id[0x49] disabled)
><6>ACPI: LAPIC (acpi_id[0x4a] lapic_id[0x4a] disabled)
><6>ACPI: LAPIC (acpi_id[0x4b] lapic_id[0x4b] disabled)
><6>ACPI: LAPIC (acpi_id[0x4c] lapic_id[0x4c] disabled)
><6>ACPI: LAPIC (acpi_id[0x4d] lapic_id[0x4d] disabled)
><6>ACPI: LAPIC (acpi_id[0x4e] lapic_id[0x4e] disabled)
><6>ACPI: LAPIC (acpi_id[0x4f] lapic_id[0x4f] disabled)
><6>ACPI: LAPIC (acpi_id[0x50] lapic_id[0x50] disabled)
><6>ACPI: LAPIC (acpi_id[0x51] lapic_id[0x51] disabled)
><6>ACPI: LAPIC (acpi_id[0x52] lapic_id[0x52] disabled)
><6>ACPI: LAPIC (acpi_id[0x53] lapic_id[0x53] disabled)
><6>ACPI: LAPIC (acpi_id[0x54] lapic_id[0x54] disabled)
><6>ACPI: LAPIC (acpi_id[0x55] lapic_id[0x55] disabled)
><6>ACPI: LAPIC (acpi_id[0x56] lapic_id[0x56] disabled)
><6>ACPI: LAPIC (acpi_id[0x57] lapic_id[0x57] disabled)
><6>ACPI: LAPIC (acpi_id[0x58] lapic_id[0x58] disabled)
><6>ACPI: LAPIC (acpi_id[0x59] lapic_id[0x59] disabled)
><6>ACPI: LAPIC (acpi_id[0x5a] lapic_id[0x5a] disabled)
><6>ACPI: LAPIC (acpi_id[0x5b] lapic_id[0x5b] disabled)
><6>ACPI: LAPIC (acpi_id[0x5c] lapic_id[0x5c] disabled)
><6>ACPI: LAPIC (acpi_id[0x5d] lapic_id[0x5d] disabled)
><6>ACPI: LAPIC (acpi_id[0x5e] lapic_id[0x5e] disabled)
><6>ACPI: LAPIC (acpi_id[0x5f] lapic_id[0x5f] disabled)
><6>ACPI: LAPIC (acpi_id[0x60] lapic_id[0x60] disabled)
><6>ACPI: LAPIC (acpi_id[0x61] lapic_id[0x61] disabled)
><6>ACPI: LAPIC (acpi_id[0x62] lapic_id[0x62] disabled)
><6>ACPI: LAPIC (acpi_id[0x63] lapic_id[0x63] disabled)
><6>ACPI: LAPIC (acpi_id[0x64] lapic_id[0x64] disabled)
><6>ACPI: LAPIC (acpi_id[0x65] lapic_id[0x65] disabled)
><6>ACPI: LAPIC (acpi_id[0x66] lapic_id[0x66] disabled)
><6>ACPI: LAPIC (acpi_id[0x67] lapic_id[0x67] disabled)
><6>ACPI: LAPIC (acpi_id[0x68] lapic_id[0x68] disabled)
><6>ACPI: LAPIC (acpi_id[0x69] lapic_id[0x69] disabled)
><6>ACPI: LAPIC (acpi_id[0x6a] lapic_id[0x6a] disabled)
><6>ACPI: LAPIC (acpi_id[0x6b] lapic_id[0x6b] disabled)
><6>ACPI: LAPIC (acpi_id[0x6c] lapic_id[0x6c] disabled)
><6>ACPI: LAPIC (acpi_id[0x6d] lapic_id[0x6d] disabled)
><6>ACPI: LAPIC (acpi_id[0x6e] lapic_id[0x6e] disabled)
><6>ACPI: LAPIC (acpi_id[0x6f] lapic_id[0x6f] disabled)
><6>ACPI: LAPIC (acpi_id[0x70] lapic_id[0x70] disabled)
><6>ACPI: LAPIC (acpi_id[0x71] lapic_id[0x71] disabled)
><6>ACPI: LAPIC (acpi_id[0x72] lapic_id[0x72] disabled)
><6>ACPI: LAPIC (acpi_id[0x73] lapic_id[0x73] disabled)
><6>ACPI: LAPIC (acpi_id[0x74] lapic_id[0x74] disabled)
><6>ACPI: LAPIC (acpi_id[0x75] lapic_id[0x75] disabled)
><6>ACPI: LAPIC (acpi_id[0x76] lapic_id[0x76] disabled)
><6>ACPI: LAPIC (acpi_id[0x77] lapic_id[0x77] disabled)
><6>ACPI: LAPIC (acpi_id[0x78] lapic_id[0x78] disabled)
><6>ACPI: LAPIC (acpi_id[0x79] lapic_id[0x79] disabled)
><6>ACPI: LAPIC (acpi_id[0x7a] lapic_id[0x7a] disabled)
><6>ACPI: LAPIC (acpi_id[0x7b] lapic_id[0x7b] disabled)
><6>ACPI: LAPIC (acpi_id[0x7c] lapic_id[0x7c] disabled)
><6>ACPI: LAPIC (acpi_id[0x7d] lapic_id[0x7d] disabled)
><6>ACPI: LAPIC (acpi_id[0x7e] lapic_id[0x7e] disabled)
><6>ACPI: LAPIC (acpi_id[0x7f] lapic_id[0x7f] disabled)
><6>ACPI: LAPIC (acpi_id[0x80] lapic_id[0x80] disabled)
><6>ACPI: LAPIC (acpi_id[0x81] lapic_id[0x81] disabled)
><6>ACPI: LAPIC (acpi_id[0x82] lapic_id[0x82] disabled)
><6>ACPI: LAPIC (acpi_id[0x83] lapic_id[0x83] disabled)
><6>ACPI: LAPIC (acpi_id[0x84] lapic_id[0x84] disabled)
><6>ACPI: LAPIC (acpi_id[0x85] lapic_id[0x85] disabled)
><6>ACPI: LAPIC (acpi_id[0x86] lapic_id[0x86] disabled)
><6>ACPI: LAPIC (acpi_id[0x87] lapic_id[0x87] disabled)
><6>ACPI: LAPIC (acpi_id[0x88] lapic_id[0x88] disabled)
><6>ACPI: LAPIC (acpi_id[0x89] lapic_id[0x89] disabled)
><6>ACPI: LAPIC (acpi_id[0x8a] lapic_id[0x8a] disabled)
><6>ACPI: LAPIC (acpi_id[0x8b] lapic_id[0x8b] disabled)
><6>ACPI: LAPIC (acpi_id[0x8c] lapic_id[0x8c] disabled)
><6>ACPI: LAPIC (acpi_id[0x8d] lapic_id[0x8d] disabled)
><6>ACPI: LAPIC (acpi_id[0x8e] lapic_id[0x8e] disabled)
><6>ACPI: LAPIC (acpi_id[0x8f] lapic_id[0x8f] disabled)
><6>ACPI: LAPIC (acpi_id[0x90] lapic_id[0x90] disabled)
><6>ACPI: LAPIC (acpi_id[0x91] lapic_id[0x91] disabled)
><6>ACPI: LAPIC (acpi_id[0x92] lapic_id[0x92] disabled)
><6>ACPI: LAPIC (acpi_id[0x93] lapic_id[0x93] disabled)
><6>ACPI: LAPIC (acpi_id[0x94] lapic_id[0x94] disabled)
><6>ACPI: LAPIC (acpi_id[0x95] lapic_id[0x95] disabled)
><6>ACPI: LAPIC (acpi_id[0x96] lapic_id[0x96] disabled)
><6>ACPI: LAPIC (acpi_id[0x97] lapic_id[0x97] disabled)
><6>ACPI: LAPIC (acpi_id[0x98] lapic_id[0x98] disabled)
><6>ACPI: LAPIC (acpi_id[0x99] lapic_id[0x99] disabled)
><6>ACPI: LAPIC (acpi_id[0x9a] lapic_id[0x9a] disabled)
><6>ACPI: LAPIC (acpi_id[0x9b] lapic_id[0x9b] disabled)
><6>ACPI: LAPIC (acpi_id[0x9c] lapic_id[0x9c] disabled)
><6>ACPI: LAPIC (acpi_id[0x9d] lapic_id[0x9d] disabled)
><6>ACPI: LAPIC (acpi_id[0x9e] lapic_id[0x9e] disabled)
><6>ACPI: LAPIC (acpi_id[0x9f] lapic_id[0x9f] disabled)
><6>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
><6>ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ5 used by override.
><7>ACPI: IRQ9 used by override.
><7>ACPI: IRQ10 used by override.
><7>ACPI: IRQ11 used by override.
><6>Using ACPI (MADT) for SMP configuration information
><6>SMP: Allowing 160 CPUs, 156 hotplug CPUs
><7>nr_irqs_gsi: 24
><6>PM: Registered nosave memory: 000000000009d000 - 000000000009e000
><6>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
><6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
><6>Allocating PCI resources starting at 80000000 (gap: 80000000:7ffbc000)
><6>Booting paravirtualized kernel on KVM
><6>NR_CPUS:4096 nr_cpumask_bits:160 nr_cpu_ids:160 nr_node_ids:1
><6>PERCPU: Embedded 31 pages/cpu @ffff88000c200000 s95064 r8192 d23720 u131072
><6>pcpu-alloc: s95064 r8192 d23720 u131072 alloc=1*2097152
><6>pcpu-alloc: [0] 000 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 
><6>pcpu-alloc: [0] 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 
><6>pcpu-alloc: [0] 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 
><6>pcpu-alloc: [0] 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 
><6>pcpu-alloc: [0] 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 
><6>pcpu-alloc: [0] 080 081 082 083 084 085 086 087 088 089 090 091 092 093 094 095 
><6>pcpu-alloc: [0] 096 097 098 099 100 101 102 103 104 105 106 107 108 109 110 111 
><6>pcpu-alloc: [0] 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 
><6>pcpu-alloc: [0] 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 
><6>pcpu-alloc: [0] 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 
><6>kvm-clock: cpu 0, msr 0:c216841, primary cpu clock
><6>kvm-stealtime: cpu 0, msr c20e880
><4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516908
><4>Policy zone: DMA32
><5>Kernel command line: ro root=/dev/mapper/vg_vm0-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_vm0/lv_root rd_LVM_LV=vg_vm0/lv_swap  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
><6>PID hash table entries: 4096 (order: 3, 32768 bytes)
><6>xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
><6>Checking aperture...
><6>No AGP bridge found
><6>Memory: 1881040k/2097116k available (5335k kernel code, 400k absent, 215676k reserved, 7016k data, 1292k init)
><6>Hierarchical RCU implementation.
><6>NR_IRQS:33024 nr_irqs:1688
><4>Console: colour VGA+ 80x25
><6>console [tty0] enabled
><6>allocated 8388608 bytes of page_cgroup
><6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
><4>Detected 3392.306 MHz processor.
><6>Calibrating delay loop (skipped) preset value.. 6784.61 BogoMIPS (lpj=3392306)
><6>pid_max: default: 163840 minimum: 1280
><6>Security Framework initialized
><6>SELinux:  Initializing.
><7>SELinux:  Starting in permissive mode
><6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><6>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Mount-cache hash table entries: 256
><6>Initializing cgroup subsys ns
><6>Initializing cgroup subsys cpuacct
><6>Initializing cgroup subsys memory
><6>Initializing cgroup subsys devices
><6>Initializing cgroup subsys freezer
><6>Initializing cgroup subsys net_cls
><6>Initializing cgroup subsys blkio
><6>Initializing cgroup subsys perf_event
><6>Initializing cgroup subsys net_prio
><6>Disabled fast string operations
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>mce: CPU supports 10 MCE banks
><6>alternatives: switching to unfair spinlock
><6>ACPI: Core revision 20090903
><6>ftrace: converting mcount calls to 0f 1f 44 00 00
><6>ftrace: allocating 21914 entries in 86 pages
><6>Enabling x2apic
><6>Enabled x2apic
><6>APIC routing finalized to physical x2apic.
><6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
><6>CPU0: Intel Xeon E312xx (Sandy Bridge) stepping 01
><6>Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
><4>NMI watchdog disabled (cpu0): hardware events not enabled
><6>Booting Node   0, Processors  #1
><6>kvm-clock: cpu 1, msr 0:c236841, secondary cpu clock
><6>Disabled fast string operations
><6>kvm-stealtime: cpu 1, msr c22e880
><4> #2
><6>kvm-clock: cpu 2, msr 0:c256841, secondary cpu clock
><6>Disabled fast string operations
><6>kvm-stealtime: cpu 2, msr c24e880
><4> #3
><6>kvm-clock: cpu 3, msr 0:c276841, secondary cpu clock
><6>Disabled fast string operations
><6>Brought up 4 CPUs
><6>kvm-stealtime: cpu 3, msr c26e880
><6>Total of 4 processors activated (27138.44 BogoMIPS).
><7>sizeof(vma)=200 bytes
><7>sizeof(page)=56 bytes
><7>sizeof(inode)=592 bytes
><7>sizeof(dentry)=192 bytes
><7>sizeof(ext3inode)=800 bytes
><7>sizeof(buffer_head)=104 bytes
><7>sizeof(skbuff)=232 bytes
><7>sizeof(task_struct)=2656 bytes
><6>devtmpfs: initialized
><6>regulator: core version 0.5
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Using configuration type 1 for base access
><4>bio: create slab <bio-0> at 0
><7>ACPI: EC: Look up EC in DSDT
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: No dock devices found.
><6>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
><6>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
><7>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
><7>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
><7>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
><7>pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
><7>PCI: root bus 00: using default resources
><6>PCI host bridge to bus 0000:00
><6>pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
><6>pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
><7>pci 0000:00:01.1: reg 20: [io  0xc000-0xc00f]
><7>pci 0000:00:01.2: reg 20: [io  0xc020-0xc03f]
><6>pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
><6>pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
><7>pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf3ffffff]
><7>pci 0000:00:02.0: reg 14: [mem 0x00000000-0x03ffffff]
><7>pci 0000:00:02.0: reg 18: [mem 0xf4000000-0xf4001fff]
><7>pci 0000:00:02.0: reg 1c: [io  0xc040-0xc05f]
><7>pci 0000:00:02.0: reg 30: [mem 0xf4010000-0xf401ffff pref]
><7>pci 0000:00:03.0: reg 10: [mem 0xf4020000-0xf403ffff]
><7>pci 0000:00:03.0: reg 14: [io  0xc080-0xc0bf]
><7>pci 0000:00:03.0: reg 30: [mem 0xf4040000-0xf405ffff pref]
><7>pci 0000:00:04.0: reg 10: [io  0xc0c0-0xc0ff]
><7>pci 0000:00:04.0: reg 14: [mem 0xf4060000-0xf4060fff]
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><6>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
><6>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
><6>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
><6>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
><6>ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
><6>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
><6>vgaarb: loaded
><6>vgaarb: bridge control possible 0000:00:02.0
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>PCI: Using ACPI for IRQ routing
><7>PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
><7>PCI: pci_cache_line_size set to 64 bytes
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>Switching to clocksource kvm-clock
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><7>pnp 00:00: [io  0x0cf8-0x0cff]
><7>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
><7>pnp 00:01: [io  0x0070-0x0071]
><7>pnp 00:01: [irq 8]
><7>pnp 00:01: [io  0x0072-0x0077]
><7>pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
><7>pnp 00:02: [io  0x0060]
><7>pnp 00:02: [io  0x0064]
><7>pnp 00:02: [irq 1]
><7>pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
><7>pnp 00:03: [irq 12]
><7>pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
><7>pnp 00:04: [io  0x03f2-0x03f5]
><7>pnp 00:04: [io  0x03f7]
><7>pnp 00:04: [irq 6]
><7>pnp 00:04: [dma 2]
><7>pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
><6>pnp: PnP ACPI: found 5 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>pci 0000:00:02.0: BAR 1: assigned [mem 0x80000000-0x83ffffff]
><6>pci 0000:00:02.0: BAR 1: set to [mem 0x80000000-0x83ffffff] (PCI address [0x80000000-0x83ffffff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><7>pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
><7>pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
><6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><6>pci 0000:00:00.0: Limiting direct PCI/PCI transfers
><6>pci 0000:00:01.0: PIIX3: Enabling Passive Release
><6>pci 0000:00:01.0: Activating ISA DMA hang workarounds
><4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
><6>pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
><6>pci 0000:00:01.2: PCI INT D disabled
><7>pci 0000:00:02.0: Boot video device
><6>Trying to unpack rootfs image as initramfs...
><6>Freeing initrd memory: 19005k freed
><6>futex hash table entries: 65536 (order: 10, 4194304 bytes)
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1408676121.306:1): initialized
><6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
><5>VFS: Disk quotas dquot_6.5.2
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>msgmni has been set to 3711
><7>SELinux:  Registering netfilter hooks
><6>alg: No test for stdrng (krng)
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key 6CC1ED932194E6E9
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><4>- Added public key D4A26C9CCD09BEDA
><4>- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
><4>- Added public key CB445E0DA3EA1F65
><4>- User ID: Red Hat Enterprise Linux Driver Update Program (key 4) <secalert@redhat.com>
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
><6>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
><6>acpiphp: Slot [1] registered
><6>acpiphp: Slot [2] registered
><6>acpiphp: Slot [3] registered
><6>acpiphp: Slot [4] registered
><6>acpiphp: Slot [5] registered
><6>acpiphp: Slot [6] registered
><6>acpiphp: Slot [7] registered
><6>acpiphp: Slot [8] registered
><6>acpiphp: Slot [9] registered
><6>acpiphp: Slot [10] registered
><6>acpiphp: Slot [11] registered
><6>acpiphp: Slot [12] registered
><6>acpiphp: Slot [13] registered
><6>acpiphp: Slot [14] registered
><6>acpiphp: Slot [15] registered
><6>acpiphp: Slot [16] registered
><6>acpiphp: Slot [17] registered
><6>acpiphp: Slot [18] registered
><6>acpiphp: Slot [19] registered
><6>acpiphp: Slot [20] registered
><6>acpiphp: Slot [21] registered
><6>acpiphp: Slot [22] registered
><6>acpiphp: Slot [23] registered
><6>acpiphp: Slot [24] registered
><6>acpiphp: Slot [25] registered
><6>acpiphp: Slot [26] registered
><6>acpiphp: Slot [27] registered
><6>acpiphp: Slot [28] registered
><6>acpiphp: Slot [29] registered
><6>acpiphp: Slot [30] registered
><6>acpiphp: Slot [31] registered
><6>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
><6>ACPI: Power Button [PWRF]
><7>ACPI: acpi_idle registered with cpuidle
><4>[Firmware Bug]: No valid trip found
><6>GHES: HEST is not enabled!
><6>Non-volatile memory driver v1.3
><6>Linux agpgart interface v0.103
><6>crash memory driver: version 1.1
><6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
><6>brd: module loaded
><6>loop: module loaded
><6>input: Macintosh mouse button emulation as /devices/virtual/input/input1
><6>Fixed MDIO Bus: probed
><6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
><6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
><6>uhci_hcd: USB Universal Host Controller Interface driver
><6>uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
><7>uhci_hcd 0000:00:01.2: setting latency timer to 64
><6>uhci_hcd 0000:00:01.2: UHCI Host Controller
><6>uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.32-497.el6.x86_64 uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:01.2
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>rtc_cmos 00:01: RTC can wake from S4
><6>rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
><6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
><6>rtc0: alarms up to one day, 114 bytes nvram
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>EFI Variables Facility v0.08 2004-May-17
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>usbhid: v2.6:USB HID core driver
><6>GRE over IPv4 demultiplexor driver
><6>TCP cubic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 17
><4>registered taskstats version 1
><6>rtc_cmos 00:01: setting system clock to 2014-08-22 10:55:21 UTC (1408704921)
><6>Initalizing network drop monitor service
><6>Freeing unused kernel memory: 1292k freed
><6>Write protecting the kernel read-only data: 10240k
><6>Freeing unused kernel memory: 788k freed
><6>Freeing unused kernel memory: 1568k freed
><6>dracut: dracut-004-349.el6
><6>dracut: rd_NO_LUKS: removing cryptoluks activation
><6>device-mapper: uevent: version 1.0.3
><6>device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
><6>udev: starting version 147
><6>dracut: Starting plymouth daemon
><6>dracut: rd_NO_DM: removing DM RAID activation
><6>dracut: rd_NO_MD: removing MD RAID activation
><7>ata_piix 0000:00:01.1: version 2.13
><7>ata_piix 0000:00:01.1: setting latency timer to 64
><6>scsi0 : ata_piix
><6>scsi1 : ata_piix
><6>ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
><6>ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
><6>usb 1-1: new full speed USB device number 2 using uhci_hcd
><6>virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
><7>  alloc irq_desc for 24 on node -1
><7>  alloc kstat_irqs on node -1
><7>virtio-pci 0000:00:04.0: irq 24 for MSI/MSI-X
><7>  alloc irq_desc for 25 on node -1
><7>  alloc kstat_irqs on node -1
><7>virtio-pci 0000:00:04.0: irq 25 for MSI/MSI-X
><7>  alloc irq_desc for 26 on node -1
><7>  alloc kstat_irqs on node -1
><7>virtio-pci 0000:00:04.0: irq 26 for MSI/MSI-X
><7>  alloc irq_desc for 27 on node -1
><7>  alloc kstat_irqs on node -1
><7>virtio-pci 0000:00:04.0: irq 27 for MSI/MSI-X
><6>scsi2 : Virtio SCSI HBA
><5>scsi 2:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><2>STARTING CRC_T10DIF
><5>sd 2:0:0:0: [sda] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 63 00 00 08
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2
><5>sd 2:0:0:0: [sda] Attached SCSI disk
><6>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
><6>usb 1-1: New USB device found, idVendor=0627, idProduct=0001
><6>usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
><6>usb 1-1: Product: QEMU USB Tablet
><6>usb 1-1: Manufacturer: QEMU 0.12.1
><6>usb 1-1: SerialNumber: 42
><6>usb 1-1: configuration #1 chosen from 1 choice
><6>input: QEMU 0.12.1 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input4
><6>generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.12.1 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
><6>dracut: Scanning devices sda2  for LVM logical volumes vg_vm0/lv_root vg_vm0/lv_swap 
><6>dracut: inactive '/dev/vg_vm0/lv_root' [45.60 GiB] inherit
><6>dracut: inactive '/dev/vg_vm0/lv_swap' [3.91 GiB] inherit
><6>Refined TSC clocksource calibration: 3392.315 MHz.
><6>EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: 
><6>dracut: Mounted root filesystem /dev/mapper/vg_vm0-lv_root
><6>dracut: Loading SELinux policy
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>pci 0000:00:01.3: no hotplug settings from platform
><6>pci 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>pci 0000:00:03.0: no hotplug settings from platform
><6>pci 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>  alloc irq_desc for 28 on node -1
><7>  alloc kstat_irqs on node -1
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>  alloc irq_desc for 29 on node -1
><7>  alloc kstat_irqs on node -1
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>  alloc irq_desc for 30 on node -1
><7>  alloc kstat_irqs on node -1
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>  alloc irq_desc for 31 on node -1
><7>  alloc kstat_irqs on node -1
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi3 : Virtio SCSI HBA
><5>scsi 3:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 3:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 3:0:0:0: [sdb] Write Protect is off
><7>sd 3:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 3:0:0:0: [sdb] Attached SCSI disk
><5>type=1404 audit(1408704922.971:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
><7>SELinux: 2048 avtab hash slots, 293840 rules.
><7>SELinux: 2048 avtab hash slots, 293840 rules.
><7>SELinux:  9 users, 12 roles, 4138 types, 228 bools, 1 sens, 1024 cats
><7>SELinux:  81 classes, 293840 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev dm-0, type ext4), uses xattr
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>type=1403 audit(1408704923.454:3): policy loaded auid=4294967295 ses=4294967295
><6>dracut: 
><6>dracut: Switching root
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>pci 0000:00:01.3: no hotplug settings from platform
><6>pci 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>pci 0000:00:03.0: no hotplug settings from platform
><6>pci 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi4 : Virtio SCSI HBA
><5>scsi 4:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 4:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 4:0:0:0: [sdb] Write Protect is off
><7>sd 4:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 4:0:0:0: [sdb] Attached SCSI disk
><6>udev: starting version 147
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><6>piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
><6>e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
><6>e1000: Copyright (c) 1999-2006 Intel Corporation.
><4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
><6>e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
><7>e1000 0000:00:03.0: setting latency timer to 64
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi5 : Virtio SCSI HBA
><5>scsi 5:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 5:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 5:0:0:0: [sdb] Write Protect is off
><7>sd 5:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 5:0:0:0: [sdb] Attached SCSI disk
><6>e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 00:01:02:b6:40:22
><6>e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
><5>sd 2:0:0:0: Attached scsi generic sg0 type 0
><5>sd 5:0:0:0: Attached scsi generic sg1 type 0
><6>microcode: CPU0 sig=0x206a1, pf=0x1, revision=0x1
><6>platform microcode: firmware: requesting intel-ucode/06-2a-01
><6>microcode: CPU1 sig=0x206a1, pf=0x1, revision=0x1
><6>platform microcode: firmware: requesting intel-ucode/06-2a-01
><6>microcode: CPU2 sig=0x206a1, pf=0x1, revision=0x1
><6>platform microcode: firmware: requesting intel-ucode/06-2a-01
><6>microcode: CPU3 sig=0x206a1, pf=0x1, revision=0x1
><6>platform microcode: firmware: requesting intel-ucode/06-2a-01
><6>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
><6>udev: renamed network interface eth0 to eth2
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi6 : Virtio SCSI HBA
><5>scsi 6:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 6:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 6:0:0:0: [sdb] Write Protect is off
><7>sd 6:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 6:0:0:0: Attached scsi generic sg1 type 0
><6> sdb: unknown partition table
><5>sd 6:0:0:0: [sdb] Attached SCSI disk
><6>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
><7>SELinux: initialized (dev sda1, type ext4), uses xattr
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><6>Adding 4095996k swap on /dev/mapper/vg_vm0-lv_swap.  Priority:-1 extents:1 across:4095996k 
><7>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi7 : Virtio SCSI HBA
><5>scsi 7:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 7:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 7:0:0:0: [sdb] Write Protect is off
><7>sd 7:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 7:0:0:0: Attached scsi generic sg1 type 0
><6> sdb: unknown partition table
><5>sd 7:0:0:0: [sdb] Attached SCSI disk
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>ip6_tables: (C) 2000-2006 Netfilter Core Team
><4>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
><6>ip_tables: (C) 2000-2006 Netfilter Core Team
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><5>type=1305 audit(1408704932.412:4): audit_pid=1358 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi8 : Virtio SCSI HBA
><5>scsi 8:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 8:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 8:0:0:0: Attached scsi generic sg1 type 0
><5>sd 8:0:0:0: [sdb] Write Protect is off
><7>sd 8:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 8:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi9 : Virtio SCSI HBA
><5>scsi 9:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 9:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 9:0:0:0: [sdb] Write Protect is off
><7>sd 9:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 9:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 9:0:0:0: Attached scsi generic sg1 type 0
><6> sdb: unknown partition table
><5>sd 9:0:0:0: [sdb] Attached SCSI disk
><6>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
><6>All bugs added by David S. Miller <davem@redhat.com>
><6>ADDRCONF(NETDEV_UP): eth2: link is not ready
><6>8021q: adding VLAN 0 to HW filter on device eth2
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi10 : Virtio SCSI HBA
><5>scsi 10:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 10:0:0:0: Attached scsi generic sg1 type 0
><5>sd 10:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 10:0:0:0: [sdb] Write Protect is off
><7>sd 10:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 10:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 10:0:0:0: [sdb] Attached SCSI disk
><6>e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
><6>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
><7>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
><7>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi11 : Virtio SCSI HBA
><5>scsi 11:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 11:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 11:0:0:0: [sdb] Write Protect is off
><7>sd 11:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 11:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 11:0:0:0: Attached scsi generic sg1 type 0
><5>sd 11:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi12 : Virtio SCSI HBA
><5>scsi 12:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 12:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 12:0:0:0: [sdb] Write Protect is off
><7>sd 12:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 12:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 12:0:0:0: Attached scsi generic sg1 type 0
><6> sdb: unknown partition table
><5>sd 12:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi13 : Virtio SCSI HBA
><5>scsi 13:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 13:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 13:0:0:0: [sdb] Write Protect is off
><7>sd 13:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 13:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 13:0:0:0: Attached scsi generic sg1 type 0
><6> sdb: unknown partition table
><5>sd 13:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi14 : Virtio SCSI HBA
><5>scsi 14:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 14:0:0:0: Attached scsi generic sg1 type 0
><5>sd 14:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 14:0:0:0: [sdb] Write Protect is off
><7>sd 14:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 14:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 14:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi15 : Virtio SCSI HBA
><5>scsi 15:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 15:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 15:0:0:0: [sdb] Write Protect is off
><7>sd 15:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 15:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 15:0:0:0: Attached scsi generic sg1 type 0
><6> sdb: unknown partition table
><5>sd 15:0:0:0: [sdb] Attached SCSI disk
><7>eth2: no IPv6 routers present
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi16 : Virtio SCSI HBA
><5>scsi 16:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 16:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 16:0:0:0: Attached scsi generic sg1 type 0
><5>sd 16:0:0:0: [sdb] Write Protect is off
><7>sd 16:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 16:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 16:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi17 : Virtio SCSI HBA
><5>scsi 17:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 17:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 17:0:0:0: [sdb] Write Protect is off
><7>sd 17:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 17:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 17:0:0:0: Attached scsi generic sg1 type 0
><6> sdb: unknown partition table
><5>sd 17:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi18 : Virtio SCSI HBA
><5>scsi 18:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 18:0:0:0: Attached scsi generic sg1 type 0
><5>sd 18:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 18:0:0:0: [sdb] Write Protect is off
><7>sd 18:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 18:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 18:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi19 : Virtio SCSI HBA
><5>scsi 19:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 19:0:0:0: Attached scsi generic sg1 type 0
><5>sd 19:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 19:0:0:0: [sdb] Write Protect is off
><7>sd 19:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 19:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 19:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi20 : Virtio SCSI HBA
><5>scsi 20:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 20:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 20:0:0:0: Attached scsi generic sg1 type 0
><5>sd 20:0:0:0: [sdb] Write Protect is off
><7>sd 20:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 20:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 20:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi21 : Virtio SCSI HBA
><5>scsi 21:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 21:0:0:0: Attached scsi generic sg1 type 0
><5>sd 21:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 21:0:0:0: [sdb] Write Protect is off
><7>sd 21:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 21:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 21:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi22 : Virtio SCSI HBA
><5>scsi 22:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 22:0:0:0: Attached scsi generic sg1 type 0
><5>sd 22:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 22:0:0:0: [sdb] Write Protect is off
><7>sd 22:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 22:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 22:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi23 : Virtio SCSI HBA
><5>scsi 23:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 23:0:0:0: Attached scsi generic sg1 type 0
><5>sd 23:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 23:0:0:0: [sdb] Write Protect is off
><7>sd 23:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 23:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 23:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi24 : Virtio SCSI HBA
><5>scsi 24:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 24:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 24:0:0:0: Attached scsi generic sg1 type 0
><5>sd 24:0:0:0: [sdb] Write Protect is off
><7>sd 24:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 24:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 24:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi25 : Virtio SCSI HBA
><5>scsi 25:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 25:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 25:0:0:0: Attached scsi generic sg1 type 0
><5>sd 25:0:0:0: [sdb] Write Protect is off
><7>sd 25:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 25:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 25:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi26 : Virtio SCSI HBA
><5>scsi 26:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 26:0:0:0: Attached scsi generic sg1 type 0
><5>sd 26:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 26:0:0:0: [sdb] Write Protect is off
><7>sd 26:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 26:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 26:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi27 : Virtio SCSI HBA
><5>scsi 27:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 27:0:0:0: Attached scsi generic sg1 type 0
><5>sd 27:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 27:0:0:0: [sdb] Write Protect is off
><7>sd 27:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 27:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 27:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi28 : Virtio SCSI HBA
><5>scsi 28:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 28:0:0:0: Attached scsi generic sg1 type 0
><5>sd 28:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 28:0:0:0: [sdb] Write Protect is off
><7>sd 28:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 28:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 28:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi29 : Virtio SCSI HBA
><5>scsi 29:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 29:0:0:0: Attached scsi generic sg1 type 0
><5>sd 29:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 29:0:0:0: [sdb] Write Protect is off
><7>sd 29:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 29:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 29:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi30 : Virtio SCSI HBA
><5>scsi 30:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 30:0:0:0: Attached scsi generic sg1 type 0
><5>sd 30:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 30:0:0:0: [sdb] Write Protect is off
><7>sd 30:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 30:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 30:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi31 : Virtio SCSI HBA
><5>scsi 31:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 31:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 31:0:0:0: Attached scsi generic sg1 type 0
><5>sd 31:0:0:0: [sdb] Write Protect is off
><7>sd 31:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 31:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 31:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi32 : Virtio SCSI HBA
><5>scsi 32:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 32:0:0:0: Attached scsi generic sg1 type 0
><5>sd 32:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 32:0:0:0: [sdb] Write Protect is off
><7>sd 32:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 32:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 32:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi33 : Virtio SCSI HBA
><5>scsi 33:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 33:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 33:0:0:0: [sdb] Write Protect is off
><7>sd 33:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 33:0:0:0: Attached scsi generic sg1 type 0
><5>sd 33:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 33:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi34 : Virtio SCSI HBA
><5>scsi 34:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 34:0:0:0: Attached scsi generic sg1 type 0
><5>sd 34:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 34:0:0:0: [sdb] Write Protect is off
><7>sd 34:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 34:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 34:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi35 : Virtio SCSI HBA
><5>scsi 35:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 35:0:0:0: Attached scsi generic sg1 type 0
><5>sd 35:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 35:0:0:0: [sdb] Write Protect is off
><7>sd 35:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 35:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 35:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi36 : Virtio SCSI HBA
><5>scsi 36:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 36:0:0:0: Attached scsi generic sg1 type 0
><5>sd 36:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 36:0:0:0: [sdb] Write Protect is off
><7>sd 36:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 36:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 36:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi37 : Virtio SCSI HBA
><5>scsi 37:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 37:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 37:0:0:0: Attached scsi generic sg1 type 0
><5>sd 37:0:0:0: [sdb] Write Protect is off
><7>sd 37:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 37:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 37:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi38 : Virtio SCSI HBA
><5>scsi 38:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 38:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 38:0:0:0: [sdb] Write Protect is off
><7>sd 38:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 38:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 38:0:0:0: Attached scsi generic sg1 type 0
><6> sdb: unknown partition table
><5>sd 38:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi39 : Virtio SCSI HBA
><5>scsi 39:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 39:0:0:0: Attached scsi generic sg1 type 0
><5>sd 39:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 39:0:0:0: [sdb] Write Protect is off
><7>sd 39:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 39:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 39:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi40 : Virtio SCSI HBA
><5>scsi 40:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 40:0:0:0: Attached scsi generic sg1 type 0
><5>sd 40:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 40:0:0:0: [sdb] Write Protect is off
><7>sd 40:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 40:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 40:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi41 : Virtio SCSI HBA
><5>scsi 41:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 41:0:0:0: Attached scsi generic sg1 type 0
><5>sd 41:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 41:0:0:0: [sdb] Write Protect is off
><7>sd 41:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 41:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 41:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi42 : Virtio SCSI HBA
><5>scsi 42:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 42:0:0:0: Attached scsi generic sg1 type 0
><5>sd 42:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 42:0:0:0: [sdb] Write Protect is off
><7>sd 42:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 42:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 42:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi43 : Virtio SCSI HBA
><5>scsi 43:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 43:0:0:0: Attached scsi generic sg1 type 0
><5>sd 43:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 43:0:0:0: [sdb] Write Protect is off
><7>sd 43:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 43:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 43:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi44 : Virtio SCSI HBA
><5>scsi 44:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 44:0:0:0: Attached scsi generic sg1 type 0
><5>sd 44:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 44:0:0:0: [sdb] Write Protect is off
><7>sd 44:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 44:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 44:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi45 : Virtio SCSI HBA
><5>scsi 45:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 45:0:0:0: Attached scsi generic sg1 type 0
><5>sd 45:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 45:0:0:0: [sdb] Write Protect is off
><7>sd 45:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 45:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 45:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi46 : Virtio SCSI HBA
><5>scsi 46:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 46:0:0:0: Attached scsi generic sg1 type 0
><5>sd 46:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 46:0:0:0: [sdb] Write Protect is off
><7>sd 46:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 46:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 46:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi47 : Virtio SCSI HBA
><5>scsi 47:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 47:0:0:0: Attached scsi generic sg1 type 0
><5>sd 47:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 47:0:0:0: [sdb] Write Protect is off
><7>sd 47:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 47:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 47:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi48 : Virtio SCSI HBA
><5>scsi 48:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 48:0:0:0: Attached scsi generic sg1 type 0
><5>sd 48:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 48:0:0:0: [sdb] Write Protect is off
><7>sd 48:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 48:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 48:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi49 : Virtio SCSI HBA
><5>scsi 49:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 49:0:0:0: Attached scsi generic sg1 type 0
><5>sd 49:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 49:0:0:0: [sdb] Write Protect is off
><7>sd 49:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 49:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 49:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi50 : Virtio SCSI HBA
><5>scsi 50:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 50:0:0:0: Attached scsi generic sg1 type 0
><5>sd 50:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 50:0:0:0: [sdb] Write Protect is off
><7>sd 50:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 50:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 50:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi51 : Virtio SCSI HBA
><5>scsi 51:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 51:0:0:0: Attached scsi generic sg1 type 0
><5>sd 51:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 51:0:0:0: [sdb] Write Protect is off
><7>sd 51:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 51:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 51:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi52 : Virtio SCSI HBA
><5>scsi 52:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 52:0:0:0: Attached scsi generic sg1 type 0
><5>sd 52:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 52:0:0:0: [sdb] Write Protect is off
><7>sd 52:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 52:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 52:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi53 : Virtio SCSI HBA
><5>scsi 53:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 53:0:0:0: Attached scsi generic sg1 type 0
><5>sd 53:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 53:0:0:0: [sdb] Write Protect is off
><7>sd 53:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 53:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 53:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi54 : Virtio SCSI HBA
><5>scsi 54:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 54:0:0:0: Attached scsi generic sg1 type 0
><5>sd 54:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 54:0:0:0: [sdb] Write Protect is off
><7>sd 54:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 54:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 54:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi55 : Virtio SCSI HBA
><5>scsi 55:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 55:0:0:0: Attached scsi generic sg1 type 0
><5>sd 55:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 55:0:0:0: [sdb] Write Protect is off
><7>sd 55:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 55:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 55:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi56 : Virtio SCSI HBA
><5>scsi 56:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 56:0:0:0: Attached scsi generic sg1 type 0
><5>sd 56:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 56:0:0:0: [sdb] Write Protect is off
><7>sd 56:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 56:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 56:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi57 : Virtio SCSI HBA
><5>scsi 57:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 57:0:0:0: Attached scsi generic sg1 type 0
><5>sd 57:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 57:0:0:0: [sdb] Write Protect is off
><7>sd 57:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 57:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 57:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi58 : Virtio SCSI HBA
><5>scsi 58:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 58:0:0:0: Attached scsi generic sg1 type 0
><5>sd 58:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 58:0:0:0: [sdb] Write Protect is off
><7>sd 58:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 58:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 58:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi59 : Virtio SCSI HBA
><5>scsi 59:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 59:0:0:0: Attached scsi generic sg1 type 0
><5>sd 59:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 59:0:0:0: [sdb] Write Protect is off
><7>sd 59:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 59:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 59:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi60 : Virtio SCSI HBA
><5>scsi 60:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 60:0:0:0: Attached scsi generic sg1 type 0
><5>sd 60:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 60:0:0:0: [sdb] Write Protect is off
><7>sd 60:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 60:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 60:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi61 : Virtio SCSI HBA
><5>scsi 61:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 61:0:0:0: Attached scsi generic sg1 type 0
><5>sd 61:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 61:0:0:0: [sdb] Write Protect is off
><7>sd 61:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 61:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 61:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi62 : Virtio SCSI HBA
><5>scsi 62:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 62:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 62:0:0:0: Attached scsi generic sg1 type 0
><5>sd 62:0:0:0: [sdb] Write Protect is off
><7>sd 62:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 62:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 62:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi63 : Virtio SCSI HBA
><5>scsi 63:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 63:0:0:0: Attached scsi generic sg1 type 0
><5>sd 63:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 63:0:0:0: [sdb] Write Protect is off
><7>sd 63:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 63:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 63:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi64 : Virtio SCSI HBA
><5>scsi 64:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 64:0:0:0: Attached scsi generic sg1 type 0
><5>sd 64:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 64:0:0:0: [sdb] Write Protect is off
><7>sd 64:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 64:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 64:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi65 : Virtio SCSI HBA
><5>scsi 65:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 65:0:0:0: Attached scsi generic sg1 type 0
><5>sd 65:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 65:0:0:0: [sdb] Write Protect is off
><7>sd 65:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 65:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 65:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi66 : Virtio SCSI HBA
><5>scsi 66:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 66:0:0:0: Attached scsi generic sg1 type 0
><5>sd 66:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 66:0:0:0: [sdb] Write Protect is off
><7>sd 66:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 66:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 66:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi67 : Virtio SCSI HBA
><5>scsi 67:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 67:0:0:0: Attached scsi generic sg1 type 0
><5>sd 67:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 67:0:0:0: [sdb] Write Protect is off
><7>sd 67:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 67:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 67:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi68 : Virtio SCSI HBA
><5>scsi 68:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 68:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 68:0:0:0: Attached scsi generic sg1 type 0
><5>sd 68:0:0:0: [sdb] Write Protect is off
><7>sd 68:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 68:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 68:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi69 : Virtio SCSI HBA
><5>scsi 69:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 69:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 69:0:0:0: Attached scsi generic sg1 type 0
><5>sd 69:0:0:0: [sdb] Write Protect is off
><7>sd 69:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 69:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 69:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi70 : Virtio SCSI HBA
><5>scsi 70:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 70:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 70:0:0:0: [sdb] Write Protect is off
><7>sd 70:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 70:0:0:0: Attached scsi generic sg1 type 0
><5>sd 70:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 70:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi71 : Virtio SCSI HBA
><5>scsi 71:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 71:0:0:0: Attached scsi generic sg1 type 0
><5>sd 71:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 71:0:0:0: [sdb] Write Protect is off
><7>sd 71:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 71:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 71:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi72 : Virtio SCSI HBA
><5>scsi 72:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 72:0:0:0: Attached scsi generic sg1 type 0
><5>sd 72:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 72:0:0:0: [sdb] Write Protect is off
><7>sd 72:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 72:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 72:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi73 : Virtio SCSI HBA
><5>scsi 73:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 73:0:0:0: Attached scsi generic sg1 type 0
><5>sd 73:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 73:0:0:0: [sdb] Write Protect is off
><7>sd 73:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 73:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 73:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi74 : Virtio SCSI HBA
><5>scsi 74:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 74:0:0:0: Attached scsi generic sg1 type 0
><5>sd 74:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 74:0:0:0: [sdb] Write Protect is off
><7>sd 74:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 74:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 74:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi75 : Virtio SCSI HBA
><5>scsi 75:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 75:0:0:0: Attached scsi generic sg1 type 0
><5>sd 75:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 75:0:0:0: [sdb] Write Protect is off
><7>sd 75:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 75:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 75:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi76 : Virtio SCSI HBA
><5>scsi 76:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 76:0:0:0: Attached scsi generic sg1 type 0
><5>sd 76:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 76:0:0:0: [sdb] Write Protect is off
><7>sd 76:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 76:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 76:0:0:0: [sdb] Attached SCSI disk
><6>scsi 76:0:0:0: [sdb]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
><6>scsi 76:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 03 80 00 00 08 00
><3>end_request: I/O error, dev sdb, sector 896
><3>Buffer I/O error on device sdb, logical block 112
><3>Buffer I/O error on device sdb, logical block 112
><3>Buffer I/O error on device sdb, logical block 0
><3>Buffer I/O error on device sdb, logical block 0
><3>Buffer I/O error on device sdb, logical block 2
><3>Buffer I/O error on device sdb, logical block 2
><3>Buffer I/O error on device sdb, logical block 0
><3>Buffer I/O error on device sdb, logical block 0
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><3>Buffer I/O error on device sdb, logical block 0
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi77 : Virtio SCSI HBA
><5>scsi 77:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 77:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 77:0:0:0: Attached scsi generic sg1 type 0
><5>sd 77:0:0:0: [sdb] Write Protect is off
><7>sd 77:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 77:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 77:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi78 : Virtio SCSI HBA
><5>scsi 78:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 78:0:0:0: Attached scsi generic sg1 type 0
><5>sd 78:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 78:0:0:0: [sdb] Write Protect is off
><7>sd 78:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 78:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 78:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi79 : Virtio SCSI HBA
><5>scsi 79:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 79:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 79:0:0:0: Attached scsi generic sg1 type 0
><5>sd 79:0:0:0: [sdb] Write Protect is off
><7>sd 79:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 79:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 79:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi80 : Virtio SCSI HBA
><5>scsi 80:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 80:0:0:0: Attached scsi generic sg1 type 0
><5>sd 80:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 80:0:0:0: [sdb] Write Protect is off
><7>sd 80:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 80:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 80:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi81 : Virtio SCSI HBA
><5>scsi 81:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 81:0:0:0: Attached scsi generic sg1 type 0
><5>sd 81:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 81:0:0:0: [sdb] Write Protect is off
><7>sd 81:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 81:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 81:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi82 : Virtio SCSI HBA
><5>scsi 82:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 82:0:0:0: Attached scsi generic sg1 type 0
><5>sd 82:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 82:0:0:0: [sdb] Write Protect is off
><7>sd 82:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 82:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 82:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi83 : Virtio SCSI HBA
><5>scsi 83:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 83:0:0:0: Attached scsi generic sg1 type 0
><5>sd 83:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 83:0:0:0: [sdb] Write Protect is off
><7>sd 83:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 83:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 83:0:0:0: [sdb] Attached SCSI disk
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><7>pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
><7>pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
><6>pci 0000:00:05.0: BAR 1: assigned [mem 0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 1: set to [mem 0x84000000-0x84000fff] (PCI address [0x84000000-0x84000fff]
><6>pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
><6>pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
><4>pci 0000:00:00.0: no hotplug settings from platform
><6>pci 0000:00:00.0: using default PCI settings
><4>pci 0000:00:01.0: no hotplug settings from platform
><6>pci 0000:00:01.0: using default PCI settings
><4>ata_piix 0000:00:01.1: no hotplug settings from platform
><6>ata_piix 0000:00:01.1: using default PCI settings
><4>uhci_hcd 0000:00:01.2: no hotplug settings from platform
><6>uhci_hcd 0000:00:01.2: using default PCI settings
><4>piix4_smbus 0000:00:01.3: no hotplug settings from platform
><6>piix4_smbus 0000:00:01.3: using default PCI settings
><4>pci 0000:00:02.0: no hotplug settings from platform
><6>pci 0000:00:02.0: using default PCI settings
><4>e1000 0000:00:03.0: no hotplug settings from platform
><6>e1000 0000:00:03.0: using default PCI settings
><4>virtio-pci 0000:00:04.0: no hotplug settings from platform
><6>virtio-pci 0000:00:04.0: using default PCI settings
><4>pci 0000:00:05.0: no hotplug settings from platform
><6>pci 0000:00:05.0: using default PCI settings
><6>virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
><6>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
><7>virtio-pci 0000:00:05.0: irq 28 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 29 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
><7>virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
><6>scsi84 : Virtio SCSI HBA
><5>scsi 84:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.12 PQ: 0 ANSI: 5
><5>sd 84:0:0:0: Attached scsi generic sg1 type 0
><5>sd 84:0:0:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
><5>sd 84:0:0:0: [sdb] Write Protect is off
><7>sd 84:0:0:0: [sdb] Mode Sense: 63 00 00 08
><5>sd 84:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: unknown partition table
><5>sd 84:0:0:0: [sdb] Attached SCSI disk
><6>scsi 84:0:0:0: [sdb]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
><6>scsi 84:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 03 78 00 00 08 00
><3>end_request: I/O error, dev sdb, sector 888
><4>__ratelimit: 1 callbacks suppressed
><3>Buffer I/O error on device sdb, logical block 111
><3>Buffer I/O error on device sdb, logical block 111
><3>Buffer I/O error on device sdb, logical block 0
><3>Buffer I/O error on device sdb, logical block 0
><6>virtio-pci 0000:00:05.0: PCI INT A disabled
><3>Buffer I/O error on device sdb, logical block 2
><3>Buffer I/O error on device sdb, logical block 2
><3>Buffer I/O error on device sdb, logical block 0
><3>Buffer I/O error on device sdb, logical block 0
><3>Buffer I/O error on device sdb, logical block 0
><3>Buffer I/O error on device sdb, logical block 512
><4>------------[ cut here ]------------
><4>WARNING: at lib/kobject.c:595 kobject_put+0x50/0x60() (Not tainted)
><4>Hardware name: RHEV Hypervisor
><4>general protection fault: 0000 [#1] SMP 
><4>last sysfs file: /sys/devices/pci0000:00/0000:00:05.0/virtio1/host84/target84:0:0/84:0:0:0/block/sdb/dev
><4>CPU 2 
><4>Modules linked in: autofs4 8021q garp stp llc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 uinput microcode sg e1000 i2c_piix4 i2c_core ext4 jbd2 mbcache sd_mod crc_t10dif virtio_scsi virtio_pci virtio_ring virtio pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod [last unloaded: speedstep_lib]
><4>
><4>Pid: 3391, comm: hald-probe-stor Not tainted 2.6.32-497.el6.x86_64 #1 Red Hat RHEV Hypervisor
><4>RIP: 0010:[<ffffffff81293449>]  [<ffffffff81293449>] strnlen+0x9/0x40
><4>RSP: 0018:ffff880076e918b8  EFLAGS: 00010086
><4>RAX: ffffffff817bbf5b RBX: ffffffff81eb8c00 RCX: 0000000000000002
><4>RDX: 0002000100001000 RSI: ffffffffffffffff RDI: 0002000100001000
><4>RBP: ffff880076e918b8 R08: 0000000000000073 R09: 27203a7463656a62
><4>R10: 726177647261483e R11: 203a656d616e2065 R12: ffffffff81eb880d
><4>R13: 0002000100001000 R14: 00000000ffffffff R15: 0000000000000000
><4>FS:  00007fed2f95d740(0000) GS:ffff88000c240000(0000) knlGS:0000000000000000
><4>CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
><4>CR2: 0000003ed8c154d0 CR3: 000000007c8bf000 CR4: 00000000000406e0
><4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
><4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
><4>Process hald-probe-stor (pid: 3391, threadinfo ffff880076e90000, task ffff88007a062ae0)
><4>Stack:
><4> ffff880076e918f8 ffffffff81294730 0000000000000001 ffffffff81eb880d
><4><d> ffffffff817e51a7 ffffffff817e51a5 ffff880076e91ab0 ffffffff81eb8c00
><4><d> ffff880076e91998 ffffffff81296168 0000000000000004 0000000affffffff
><4>Call Trace:
><4> [<ffffffff81294730>] string+0x40/0x100
><4> [<ffffffff81296168>] vsnprintf+0x218/0x5e0
><4> [<ffffffff8107570f>] ? release_console_sem+0x1cf/0x220
><4> [<ffffffff812965f1>] vscnprintf+0x11/0x30
><4> [<ffffffff81075bc6>] vprintk+0xc6/0x560
><4> [<ffffffff8128dac0>] ? kobject_put+0x50/0x60
><4> [<ffffffff815290a5>] ? printk+0x41/0x44
><4> [<ffffffff8128dac0>] ? kobject_put+0x50/0x60
><4> [<ffffffff81074ded>] warn_slowpath_common+0x7d/0xc0
><4> [<ffffffff81074ee6>] warn_slowpath_fmt+0x46/0x50
><4> [<ffffffff8152ab3e>] ? mutex_lock+0x1e/0x50
><4> [<ffffffff8128dac0>] kobject_put+0x50/0x60
><4> [<ffffffff81367727>] put_device+0x17/0x20
><4> [<ffffffff8138089c>] scsi_host_dev_release+0xbc/0xd0
><4> [<ffffffff81367ec7>] device_release+0x27/0x90
><4> [<ffffffff8128dc1d>] kobject_release+0x8d/0x240
><4> [<ffffffff8128db90>] ? kobject_release+0x0/0x240
><4> [<ffffffff8128f107>] kref_put+0x37/0x70
><4> [<ffffffff8128da97>] kobject_put+0x27/0x60
><4> [<ffffffff81367727>] put_device+0x17/0x20
><4> [<ffffffff81389852>] scsi_target_dev_release+0x22/0x30
><4> [<ffffffff81367ec7>] device_release+0x27/0x90
><4> [<ffffffff8128dc1d>] kobject_release+0x8d/0x240
><4> [<ffffffff8128db90>] ? kobject_release+0x0/0x240
><4> [<ffffffff8128f107>] kref_put+0x37/0x70
><4> [<ffffffff8128da97>] kobject_put+0x27/0x60
><4> [<ffffffff81367727>] put_device+0x17/0x20
><4> [<ffffffff8138d3c0>] scsi_device_dev_release_usercontext+0xf0/0x100
><4> [<ffffffff81098955>] execute_in_process_context+0x55/0x60
><4> [<ffffffff8138d2cc>] scsi_device_dev_release+0x1c/0x20
><4> [<ffffffff81367ec7>] device_release+0x27/0x90
><4> [<ffffffff8128dc1d>] kobject_release+0x8d/0x240
><4> [<ffffffff8128db90>] ? kobject_release+0x0/0x240
><4> [<ffffffff8128f107>] kref_put+0x37/0x70
><4> [<ffffffff8128da97>] kobject_put+0x27/0x60
><4> [<ffffffff81367727>] put_device+0x17/0x20
><4> [<ffffffff8137e2f4>] scsi_device_put+0x44/0x60
><4> [<ffffffffa006952a>] scsi_disk_put+0x3a/0x60 [sd_mod]
><4> [<ffffffffa006a708>] sd_release+0x58/0xe0 [sd_mod]
><4> [<ffffffff811cb6d6>] __blkdev_put+0x1a6/0x1b0
><4> [<ffffffff811cb6f0>] blkdev_put+0x10/0x20
><4> [<ffffffff811cb733>] blkdev_close+0x33/0x60
><4> [<ffffffff8118f7c5>] __fput+0xf5/0x210
><4> [<ffffffff8118f905>] fput+0x25/0x30
><4> [<ffffffff8118ab5d>] filp_close+0x5d/0x90
><4> [<ffffffff8118ac35>] sys_close+0xa5/0x100
><4> [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b
><4>Code: 66 90 48 83 c2 01 80 3a 00 75 f7 48 89 d0 48 29 f8 c9 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 85 f6 48 89 e5 74 2e <80> 3f 00 74 29 48 83 ee 01 48 89 f8 eb 12 66 0f 1f 84 00 00 00 
><1>RIP  [<ffffffff81293449>] strnlen+0x9/0x40
><4> RSP <ffff880076e918b8>

Actions: View

Attachments on bug 1132765: 929415 | 984509 | 1002139