Attachment 930781 Details for Bug 1120305 – answer file, all-in-one, no SSL, Heat=y

answer file, all-in-one, no SSL, Heat=y

puma38.answer (text/plain), 16.25 KB, created by Ido Ovadia on 2014-08-26 08:09:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ido Ovadia

Created: 2014-08-26 08:09:25 UTC

Size: 16.25 KB

patch

obsolete

>[general]
>
># Path to a Public key to install on servers. If a usable key has not
># been installed on the remote servers the user will be prompted for a
># password and this key will be installed so the password will not be
># required again
>CONFIG_SSH_KEY=/root/.ssh/id_rsa.pub
>
># Set to 'y' if you would like Packstack to install MySQL
>CONFIG_MYSQL_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack Image
># Service (Glance)
>CONFIG_GLANCE_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack Block
># Storage (Cinder)
>CONFIG_CINDER_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack Compute
># (Nova)
>CONFIG_NOVA_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack
># Networking (Neutron). Otherwise Nova Network will be used.
>CONFIG_NEUTRON_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack
># Dashboard (Horizon)
>CONFIG_HORIZON_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack Object
># Storage (Swift)
>CONFIG_SWIFT_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack
># Metering (Ceilometer)
>CONFIG_CEILOMETER_INSTALL=y
>
># Set to 'y' if you would like Packstack to install OpenStack
># Orchestration (Heat)
>CONFIG_HEAT_INSTALL=y
>
># Set to 'y' if you would like Packstack to install the OpenStack
># Client packages. An admin "rc" file will also be installed
>CONFIG_CLIENT_INSTALL=y
>
># Comma separated list of NTP servers. Leave plain if Packstack
># should not install ntpd on instances.
>CONFIG_NTP_SERVERS=
>
># Set to 'y' if you would like Packstack to install Nagios to monitor
># OpenStack hosts
>CONFIG_NAGIOS_INSTALL=y
>
># Comma separated list of servers to be excluded from installation in
># case you are running Packstack the second time with the same answer
># file and don't want Packstack to touch these servers. Leave plain if
># you don't need to exclude any server.
>EXCLUDE_SERVERS=
>
># Set to 'y' if you want to run OpenStack services in debug mode.
># Otherwise set to 'n'.
>CONFIG_DEBUG_MODE=n
>
># The IP address of the server on which to install OpenStack services
># specific to controller role such as API servers, Horizon, etc.
>CONFIG_CONTROLLER_HOST=10.35.160.85
>
># The list of IP addresses of the server on which to install the Nova
># compute service
>CONFIG_COMPUTE_HOSTS=10.35.160.85
>
># The list of IP addresses of the server on which to install the
># network service such as Nova network or Neutron
>CONFIG_NETWORK_HOSTS=10.35.160.85
>
># Set to 'y' if you want to use VMware vCenter as hypervisor and
># storage. Otherwise set to 'n'.
>CONFIG_VMWARE_BACKEND=n
>
># The IP address of the VMware vCenter server
>CONFIG_VCENTER_HOST=
>
># The username to authenticate to VMware vCenter server
>CONFIG_VCENTER_USER=
>
># The password to authenticate to VMware vCenter server
>CONFIG_VCENTER_PASSWORD=123456
>
># The name of the vCenter cluster
>CONFIG_VCENTER_CLUSTER_NAME=
>
># To subscribe each server to EPEL enter "y"
>CONFIG_USE_EPEL=n
>
># A comma separated list of URLs to any additional yum repositories
># to install
>CONFIG_REPO=
>
># To subscribe each server with Red Hat subscription manager, include
># this with CONFIG_RH_PW
>CONFIG_RH_USER=
>
># To subscribe each server with Red Hat subscription manager, include
># this with CONFIG_RH_USER
>CONFIG_RH_PW=123456
>
># To enable RHEL optional repos use value "y"
>CONFIG_RH_OPTIONAL=y
>
># To subscribe each server with RHN Satellite,fill Satellite's URL
># here. Note that either satellite's username/password or activation
># key has to be provided
>CONFIG_SATELLITE_URL=
>
># Username to access RHN Satellite
>CONFIG_SATELLITE_USER=
>
># Password to access RHN Satellite
>CONFIG_SATELLITE_PW=123456
>
># Activation key for subscription to RHN Satellite
>CONFIG_SATELLITE_AKEY=
>
># Specify a path or URL to a SSL CA certificate to use
>CONFIG_SATELLITE_CACERT=
>
># If required specify the profile name that should be used as an
># identifier for the system in RHN Satellite
>CONFIG_SATELLITE_PROFILE=
>
># Comma separated list of flags passed to rhnreg_ks. Valid flags are:
># novirtinfo, norhnsd, nopackages
>CONFIG_SATELLITE_FLAGS=
>
># Specify a HTTP proxy to use with RHN Satellite
>CONFIG_SATELLITE_PROXY=
>
># Specify a username to use with an authenticated HTTP proxy
>CONFIG_SATELLITE_PROXY_USER=
>
># Specify a password to use with an authenticated HTTP proxy.
>CONFIG_SATELLITE_PROXY_PW=123456
>
># Set the AMQP service backend. Allowed values are: qpid, rabbitmq
>CONFIG_AMQP_BACKEND=rabbitmq
>
># The IP address of the server on which to install the AMQP service
>CONFIG_AMQP_HOST=10.35.160.85
>
># Enable SSL for the AMQP service
>CONFIG_AMQP_ENABLE_SSL=n
>
># Enable Authentication for the AMQP service
>CONFIG_AMQP_ENABLE_AUTH=n
>
># The password for the NSS certificate database of the AMQP service
>CONFIG_AMQP_NSS_CERTDB_PW=123456
>
># The port in which the AMQP service listens to SSL connections
>CONFIG_AMQP_SSL_PORT=5671
>
># The filename of the certificate that the AMQP service is going to
># use
>CONFIG_AMQP_SSL_CERT_FILE=/etc/pki/tls/certs/amqp_selfcert.pem
>
># The filename of the private key that the AMQP service is going to
># use
>CONFIG_AMQP_SSL_KEY_FILE=/etc/pki/tls/private/amqp_selfkey.pem
>
># Auto Generates self signed SSL certificate and key
>CONFIG_AMQP_SSL_SELF_SIGNED=y
>
># User for amqp authentication
>CONFIG_AMQP_AUTH_USER=amqp_user
>
># Password for user authentication
>CONFIG_AMQP_AUTH_PASSWORD=123456
>
># The IP address of the server on which to install MySQL or IP
># address of DB server to use if MySQL installation was not selected
>CONFIG_MYSQL_HOST=10.35.160.85
>
># Username for the MySQL admin user
>CONFIG_MYSQL_USER=root
>
># Password for the MySQL admin user
>CONFIG_MYSQL_PW=123456
>
># The password to use for the Keystone to access DB
>CONFIG_KEYSTONE_DB_PW=123456
>
># The token to use for the Keystone service api
>CONFIG_KEYSTONE_ADMIN_TOKEN=4c76ddd6a91c463491f80ca5a1154f87
>
># The password to use for the Keystone admin user
>CONFIG_KEYSTONE_ADMIN_PW=123456
>
># The password to use for the Keystone demo user
>CONFIG_KEYSTONE_DEMO_PW=123456
>
># Kestone token format. Use either UUID or PKI
>CONFIG_KEYSTONE_TOKEN_FORMAT=PKI
>
># The password to use for the Glance to access DB
>CONFIG_GLANCE_DB_PW=123456
>
># The password to use for the Glance to authenticate with Keystone
>CONFIG_GLANCE_KS_PW=123456
>
># The password to use for the Cinder to access DB
>CONFIG_CINDER_DB_PW=123456
>
># The password to use for the Cinder to authenticate with Keystone
>CONFIG_CINDER_KS_PW=123456
>
># The Cinder backend to use, valid options are: lvm, gluster, nfs
>CONFIG_CINDER_BACKEND=lvm
>
># Create Cinder's volumes group. This should only be done for testing
># on a proof-of-concept installation of Cinder. This will create a
># file-backed volume group and is not suitable for production usage.
>CONFIG_CINDER_VOLUMES_CREATE=y
>
># Cinder's volumes group size. Note that actual volume size will be
># extended with 3% more space for VG metadata.
>CONFIG_CINDER_VOLUMES_SIZE=20G
>
># A single or comma separated list of gluster volume shares to mount,
># eg: ip-address:/vol-name, domain:/vol-name
>CONFIG_CINDER_GLUSTER_MOUNTS=
>
># A single or comma seprated list of NFS exports to mount, eg: ip-
># address:/export-name
>CONFIG_CINDER_NFS_MOUNTS=
>
># The password to use for the Nova to access DB
>CONFIG_NOVA_DB_PW=123456
>
># The password to use for the Nova to authenticate with Keystone
>CONFIG_NOVA_KS_PW=123456
>
># The overcommitment ratio for virtual to physical CPUs. Set to 1.0
># to disable CPU overcommitment
>CONFIG_NOVA_SCHED_CPU_ALLOC_RATIO=16.0
>
># The overcommitment ratio for virtual to physical RAM. Set to 1.0 to
># disable RAM overcommitment
>CONFIG_NOVA_SCHED_RAM_ALLOC_RATIO=1.5
>
># Protocol used for instance migration. Allowed values are tcp and
># ssh. Note that by defaul nova user is created with /sbin/nologin
># shell so that ssh protocol won't be working. To make ssh protocol
># work you have to fix nova user on compute hosts manually.
>CONFIG_NOVA_COMPUTE_MIGRATE_PROTOCOL=tcp
>
># Private interface for Flat DHCP on the Nova compute servers
>CONFIG_NOVA_COMPUTE_PRIVIF=eth1
>
># Nova network manager
>CONFIG_NOVA_NETWORK_MANAGER=nova.network.manager.FlatDHCPManager
>
># Public interface on the Nova network server
>CONFIG_NOVA_NETWORK_PUBIF=eth0
>
># Private interface for network manager on the Nova network server
>CONFIG_NOVA_NETWORK_PRIVIF=eth1
>
># IP Range for network manager
>CONFIG_NOVA_NETWORK_FIXEDRANGE=192.168.32.0/22
>
># IP Range for Floating IP's
>CONFIG_NOVA_NETWORK_FLOATRANGE=10.3.4.0/22
>
># Name of the default floating pool to which the specified floating
># ranges are added to
>CONFIG_NOVA_NETWORK_DEFAULTFLOATINGPOOL=nova
>
># Automatically assign a floating IP to new instances
>CONFIG_NOVA_NETWORK_AUTOASSIGNFLOATINGIP=n
>
># First VLAN for private networks
>CONFIG_NOVA_NETWORK_VLAN_START=100
>
># Number of networks to support
>CONFIG_NOVA_NETWORK_NUMBER=1
>
># Number of addresses in each private subnet
>CONFIG_NOVA_NETWORK_SIZE=255
>
># The password to use for Neutron to authenticate with Keystone
>CONFIG_NEUTRON_KS_PW=123456
>
># The password to use for Neutron to access DB
>CONFIG_NEUTRON_DB_PW=123456
>
># The name of the bridge that the Neutron L3 agent will use for
># external traffic, or 'provider' if using provider networks
>CONFIG_NEUTRON_L3_EXT_BRIDGE=br-ex
>
># The name of the L2 plugin to be used with Neutron
>CONFIG_NEUTRON_L2_PLUGIN=ml2
>
># Neutron metadata agent password
>CONFIG_NEUTRON_METADATA_PW=123456
>
># Set to 'y' if you would like Packstack to install Neutron LBaaS
>CONFIG_LBAAS_INSTALL=y
>
># Set to 'y' if you would like Packstack to install Neutron L3
># Metering agent
>CONFIG_NEUTRON_METERING_AGENT_INSTALL=y
>
># Whether to configure neutron Firewall as a Service
>CONFIG_NEUTRON_FWAAS=n
>
># A comma separated list of network type driver entrypoints to be
># loaded from the neutron.ml2.type_drivers namespace.
>CONFIG_NEUTRON_ML2_TYPE_DRIVERS=vxlan
>
># A comma separated ordered list of network_types to allocate as
># tenant networks. The value 'local' is only useful for single-box
># testing but provides no connectivity between hosts.
>CONFIG_NEUTRON_ML2_TENANT_NETWORK_TYPES=vxlan
>
># A comma separated ordered list of networking mechanism driver
># entrypoints to be loaded from the neutron.ml2.mechanism_drivers
># namespace.
>CONFIG_NEUTRON_ML2_MECHANISM_DRIVERS=openvswitch
>
># A comma separated  list of physical_network names with which flat
># networks can be created. Use * to allow flat networks with arbitrary
># physical_network names.
>CONFIG_NEUTRON_ML2_FLAT_NETWORKS=*
>
># A comma separated list of <physical_network>:<vlan_min>:<vlan_max>
># or <physical_network> specifying physical_network names usable for
># VLAN provider and tenant networks, as well as ranges of VLAN tags on
># each available for allocation to tenant networks.
>CONFIG_NEUTRON_ML2_VLAN_RANGES=
>
># A comma separated list of <tun_min>:<tun_max> tuples enumerating
># ranges of GRE tunnel IDs that are available for tenant network
># allocation. Should be an array with tun_max +1 - tun_min > 1000000
>CONFIG_NEUTRON_ML2_TUNNEL_ID_RANGES=
>
># Multicast group for VXLAN. If unset, disables VXLAN enable sending
># allocate broadcast traffic to this multicast group. When left
># unconfigured, will disable multicast VXLAN mode. Should be an
># Multicast IP (v4 or v6) address.
>CONFIG_NEUTRON_ML2_VXLAN_GROUP=
>
># A comma separated list of <vni_min>:<vni_max> tuples enumerating
># ranges of VXLAN VNI IDs that are available for tenant network
># allocation. Min value is 0 and Max value is 16777215.
>CONFIG_NEUTRON_ML2_VNI_RANGES=10:100
>
># The name of the L2 agent to be used with Neutron
>CONFIG_NEUTRON_L2_AGENT=openvswitch
>
># The type of network to allocate for tenant networks (eg. vlan,
># local)
>CONFIG_NEUTRON_LB_TENANT_NETWORK_TYPE=local
>
># A comma separated list of VLAN ranges for the Neutron linuxbridge
># plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999)
>CONFIG_NEUTRON_LB_VLAN_RANGES=
>
># A comma separated list of interface mappings for the Neutron
># linuxbridge plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3
># :br-eth3)
>CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS=
>
># Type of network to allocate for tenant networks (eg. vlan, local,
># gre, vxlan)
>CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=vxlan
>
># A comma separated list of VLAN ranges for the Neutron openvswitch
># plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999)
>CONFIG_NEUTRON_OVS_VLAN_RANGES=
>
># A comma separated list of bridge mappings for the Neutron
># openvswitch plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3
># :br-eth3)
>CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=
>
># A comma separated list of colon-separated OVS bridge:interface
># pairs. The interface will be added to the associated bridge.
>CONFIG_NEUTRON_OVS_BRIDGE_IFACES=
>
># A comma separated list of tunnel ranges for the Neutron openvswitch
># plugin (eg. 1:1000)
>CONFIG_NEUTRON_OVS_TUNNEL_RANGES=
>
># The interface for the OVS tunnel. Packstack will override the IP
># address used for tunnels on this hypervisor to the IP found on the
># specified interface. (eg. eth1)
>CONFIG_NEUTRON_OVS_TUNNEL_IF=
>
># VXLAN UDP port
>CONFIG_NEUTRON_OVS_VXLAN_UDP_PORT=4789
>
># To set up Horizon communication over https set this to 'y'
>CONFIG_HORIZON_SSL=n
>
># PEM encoded certificate to be used for ssl on the https server,
># leave blank if one should be generated, this certificate should not
># require a passphrase
>CONFIG_SSL_CERT=
>
># SSL keyfile corresponding to the certificate if one was entered
>CONFIG_SSL_KEY=
>
># PEM encoded CA certificates from which the certificate chain of the
># server certificate can be assembled.
>CONFIG_SSL_CACHAIN=
>
># The password to use for the Swift to authenticate with Keystone
>CONFIG_SWIFT_KS_PW=123456
>
># A comma separated list of devices which to use as Swift Storage
># device. Each entry should take the format /path/to/dev, for example
># /dev/vdb will install /dev/vdb as Swift storage device (packstack
># does not create the filesystem, you must do this first). If value is
># omitted Packstack will create a loopback device for test setup
>CONFIG_SWIFT_STORAGES=
>
># Number of swift storage zones, this number MUST be no bigger than
># the number of storage devices configured
>CONFIG_SWIFT_STORAGE_ZONES=1
>
># Number of swift storage replicas, this number MUST be no bigger
># than the number of storage zones configured
>CONFIG_SWIFT_STORAGE_REPLICAS=1
>
># FileSystem type for storage nodes
>CONFIG_SWIFT_STORAGE_FSTYPE=ext4
>
># Shared secret for Swift
>CONFIG_SWIFT_HASH=04d178760d0e42f7
>
># Size of the swift loopback file storage device
>CONFIG_SWIFT_STORAGE_SIZE=2G
>
># Whether to provision for demo usage and testing. Note that
># provisioning is only supported for all-in-one installations.
>CONFIG_PROVISION_DEMO=y
>
># Whether to configure tempest for testing
>CONFIG_PROVISION_TEMPEST=n
>
># The name of the Tempest Provisioning user. If you don't provide a
># user name, Tempest will be configured in a standalone mode
>CONFIG_PROVISION_TEMPEST_USER=
>
># The password to use for the Tempest Provisioning user
>CONFIG_PROVISION_TEMPEST_USER_PW=123456
>
># The CIDR network address for the floating IP subnet
>CONFIG_PROVISION_DEMO_FLOATRANGE=172.24.4.224/28
>
># The uri of the tempest git repository to use
>CONFIG_PROVISION_TEMPEST_REPO_URI=https://github.com/openstack/tempest.git
>
># The revision of the tempest git repository to use
>CONFIG_PROVISION_TEMPEST_REPO_REVISION=master
>
># Whether to configure the ovs external bridge in an all-in-one
># deployment
>CONFIG_PROVISION_ALL_IN_ONE_OVS_BRIDGE=n
>
># The password used by Heat user to authenticate against MySQL
>CONFIG_HEAT_DB_PW=123456
>
># The encryption key to use for authentication info in database
>CONFIG_HEAT_AUTH_ENC_KEY=34918c83a15441f8
>
># The password to use for the Heat to authenticate with Keystone
>CONFIG_HEAT_KS_PW=123456
>
># Set to 'y' if you would like Packstack to install Heat CloudWatch
># API
>CONFIG_HEAT_CLOUDWATCH_INSTALL=y
>
># Set to 'y' if you would like Packstack to install Heat with trusts
># as deferred auth method. If not, the stored password method will be
># used.
>CONFIG_HEAT_USING_TRUSTS=y
>
># Set to 'y' if you would like Packstack to install Heat
># CloudFormation API
>CONFIG_HEAT_CFN_INSTALL=y
>
># Name of Keystone domain for Heat
>CONFIG_HEAT_DOMAIN=heat
>
># Name of Keystone domain admin user for Heat
>CONFIG_HEAT_DOMAIN_ADMIN=heat_admin
>
># Password for Keystone domain admin user for Heat
>CONFIG_HEAT_DOMAIN_PASSWORD=123456
>
># Secret key for signing metering messages
>CONFIG_CEILOMETER_SECRET=162eff4e1b074e3b
>
># The password to use for Ceilometer to authenticate with Keystone
>CONFIG_CEILOMETER_KS_PW=123456
>
># The IP address of the server on which to install MongoDB
>CONFIG_MONGODB_HOST=10.35.160.85
>
># The password of the nagiosadmin user on the Nagios server
>CONFIG_NAGIOS_PW=123456

Actions: View

Attachments on bug 1120305: 918477 | 930781 | 930794 | 930795