Attachment 935402 Details for Bug 1139314 – /etc/smartmontools/smartd.conf from the system (I have not customized it.)

/etc/smartmontools/smartd.conf from the system (I have not customized it.)

smartd.conf (text/plain), 6.65 KB, created by Dale R. Worley on 2014-09-08 15:55:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dale R. Worley

Created: 2014-09-08 15:55:29 UTC

Size: 6.65 KB

patch

obsolete

># Sample configuration file for smartd.  See man smartd.conf.
>
># Home page is: http://smartmontools.sourceforge.net
>
># $Id: smartd.conf 3651 2012-10-18 15:11:36Z samm2 $
>
># smartd will re-read the configuration file if it receives a HUP
># signal
>
># The file gives a list of devices to monitor using smartd, with one
># device per line. Text after a hash (#) is ignored, and you may use
># spaces and tabs for white space. You may use '\' to continue lines.
>
># You can usually identify which hard disks are on your system by
># looking in /proc/ide and in /proc/scsi.
>
># The word DEVICESCAN will cause any remaining lines in this
># configuration file to be ignored: it tells smartd to scan for all
># ATA and SCSI devices.  DEVICESCAN may be followed by any of the
># Directives listed below, which will be applied to all devices that
># are found.  Most users should comment out DEVICESCAN and explicitly
># list the devices that they wish to monitor.
>DEVICESCAN -H -m root -M exec /usr/libexec/smartmontools/smartdnotify -n standby,10,q
>
># Alternative setting to ignore temperature and power-on hours reports
># in syslog.
>#DEVICESCAN -I 194 -I 231 -I 9
>
># Alternative setting to report more useful raw temperature in syslog.
>#DEVICESCAN -R 194 -R 231 -I 9
>
># Alternative setting to report raw temperature changes >= 5 Celsius
># and min/max temperatures.
>#DEVICESCAN -I 194 -I 231 -I 9 -W 5
>
># First (primary) ATA/IDE hard disk.  Monitor all attributes, enable
># automatic online data collection, automatic Attribute autosave, and
># start a short self-test every day between 2-3am, and a long self test
># Saturdays between 3-4am.
>#/dev/hda -a -o on -S on -s (S/../.././02|L/../../6/03)
>
># Monitor SMART status, ATA Error Log, Self-test log, and track
># changes in all attributes except for attribute 194
>#/dev/hdb -H -l error -l selftest -t -I 194 
>
># Monitor all attributes except normalized Temperature (usually 194),
># but track Temperature changes >= 4 Celsius, report Temperatures
># >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
># Send mail on SMART failures or when Temperature is >= 55 Celsius.
>#/dev/hdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
>
># An ATA disk may appear as a SCSI device to the OS. If a SCSI to
># ATA Translation (SAT) layer is between the OS and the device then
># this can be flagged with the '-d sat' option. This situation may
># become common with SATA disks in SAS and FC environments.
># /dev/sda -a -d sat
>
># A very silent check.  Only report SMART health status if it fails
># But send an email in this case
>#/dev/hdc -H -C 0 -U 0 -m admin@example.com
>
># First two SCSI disks.  This will monitor everything that smartd can
># monitor.  Start extended self-tests Wednesdays between 6-7pm and
># Sundays between 1-2 am
>#/dev/sda -d scsi -s L/../../3/18
>#/dev/sdb -d scsi -s L/../../7/01
>
># Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
># the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4, 
># and 4-5 am.
># NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
># is DEPRECATED.  Use the /dev/tweN character device interface instead.
># For example /dev/twe0, /dev/twe1, and so on.
>#/dev/sdc -d 3ware,0 -a -s L/../../7/01
>#/dev/sdc -d 3ware,1 -a -s L/../../7/02
>#/dev/sdc -d 3ware,2 -a -s L/../../7/03
>#/dev/sdc -d 3ware,3 -a -s L/../../7/04
>
># Monitor 2 ATA disks connected to a 3ware 9000 controller which
># uses the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
># between 1-2 and 3-4 am.
>#/dev/twa0 -d 3ware,0 -a -s L/../../2/01
>#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
>
># Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
># uses the 3w-sas driver (Linux). Start long self-tests Tuesdays
># between 1-2 and 3-4 am.
># On FreeBSD /dev/tws0 should be used instead
>#/dev/twl0 -d 3ware,0 -a -s L/../../2/01
>#/dev/twl0 -d 3ware,1 -a -s L/../../2/03
>
># Same as above for Windows. Option '-d 3ware,N' is not necessary,
># disk (port) number is specified in device name.
># NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
>#/dev/hdc,0 -a -s L/../../2/01
>#/dev/hdc,1 -a -s L/../../2/03
>
># Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
># self-tests Sundays between 1-2, 2-3, and 3-4 am. 
>#/dev/sdd -d hpt,1/1 -a -s L/../../7/01
>#/dev/sdd -d hpt,1/2 -a -s L/../../7/02
>#/dev/sdd -d hpt,1/3 -a -s L/../../7/03
>
># Monitor 2 ATA disks connected to the same PMPort which connected to the
># HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
>#/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
>#/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
>
># HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
># PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
>#
>#   -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
>#   -T TYPE set the tolerance to one of: normal, permissive
>#   -o VAL  Enable/disable automatic offline tests (on/off)
>#   -S VAL  Enable/disable attribute autosave (on/off)
>#   -n MODE No check. MODE is one of: never, sleep, standby, idle
>#   -H      Monitor SMART Health Status, report if failed
>#   -l TYPE Monitor SMART log.  Type is one of: error, selftest
>#   -f      Monitor for failure of any 'Usage' Attributes
>#   -m ADD  Send warning email to ADD for -H, -l error, -l selftest, and -f
>#   -M TYPE Modify email warning behavior (see man page)
>#   -s REGE Start self-test when type/date matches regular expression (see man page)
>#   -p      Report changes in 'Prefailure' Normalized Attributes
>#   -u      Report changes in 'Usage' Normalized Attributes
>#   -t      Equivalent to -p and -u Directives
>#   -r ID   Also report Raw values of Attribute ID with -p, -u or -t
>#   -R ID   Track changes in Attribute ID Raw value with -p, -u or -t
>#   -i ID   Ignore Attribute ID for -f Directive
>#   -I ID   Ignore Attribute ID for -p, -u or -t Directive
>#   -C ID   Report if Current Pending Sector count non-zero
>#   -U ID   Report if Offline Uncorrectable count non-zero
>#   -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
>#   -v N,ST Modifies labeling of Attribute N (see man page)
>#   -a      Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
>#   -F TYPE Use firmware bug workaround. Type is one of: none, samsung
>#   -P TYPE Drive-specific presets: use, ignore, show, showall
>#    #      Comment: text after a hash sign is ignored
>#    \      Line continuation character
># Attribute ID is a decimal integer 1 <= ID <= 255
># except for -C and -U, where ID = 0 turns them off.
># All but -d, -m and -M Directives are only implemented for ATA devices
>#
># If the test string DEVICESCAN is the first uncommented text
># then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z]
># DEVICESCAN may be followed by any desired Directives.

Actions: View

Attachments on bug 1139314: 935402