Attachment 94783 Details for Bug 105799 – dmesg

dmesg

dmesg (text/plain), 8.12 KB, created by raxet on 2003-09-27 17:50:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: raxet

Created: 2003-09-27 17:50:23 UTC

Size: 8.12 KB

patch

obsolete

>Linux version 2.4.22-1.2061.nptl (bhcompile@daffy.perf.redhat.com) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #1 Mon Sep 22 14:39:36 EDT 2003
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002ffec000 (usable)
> BIOS-e820: 000000002ffec000 - 000000002ffef000 (ACPI data)
> BIOS-e820: 000000002ffef000 - 000000002ffff000 (reserved)
> BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>767MB LOWMEM available.
>ACPI: have wakeup address 0xc0001000
>On node 0 totalpages: 196588
>zone(0): 4096 pages.
>zone(1): 192492 pages.
>zone(2): 0 pages.
>ACPI: RSDP (v000 ASUS                                      ) @ 0x000f5340
>ACPI: RSDT (v001 ASUS   P4PE     0x42302e31 MSFT 0x31313031) @ 0x2ffec000
>ACPI: FADT (v001 ASUS   P4PE     0x42302e31 MSFT 0x31313031) @ 0x2ffec0c0
>ACPI: BOOT (v001 ASUS   P4PE     0x42302e31 MSFT 0x31313031) @ 0x2ffec030
>ACPI: MADT (v001 ASUS   P4PE     0x42302e31 MSFT 0x31313031) @ 0x2ffec058
>ACPI: DSDT (v001   ASUS P4PE     0x00001000 MSFT 0x0100000b) @ 0x00000000
>Kernel command line: ro root=LABEL=/
>Initializing CPU#0
>Detected 1804.150 MHz processor.
>Console: colour VGA+ 80x25
>Calibrating delay loop... 3591.37 BogoMIPS
>Memory: 773108k/786352k available (1509k kernel code, 12856k reserved, 1114k data, 136k init, 0k highmem)
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
>Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU:     After generic, caps: 3febfbff 00000000 00000000 00000000
>CPU:             Common caps: 3febfbff 00000000 00000000 00000000
>CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
>mtrr: detected mtrr type: Intel
>ACPI: Subsystem revision 20030916
>ACPI: Interpreter disabled.
>PCI: PCI BIOS revision 2.10 entry at 0xf1e50, last bus=2
>PCI: Using configuration type 1
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
>Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
>PCI: Using IRQ router PIIX/ICH [8086/24c0] at 00:1f.0
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
>Starting kswapd
>VFS: Disk quotas vdquot_6.5.1
>Asus Laptop ACPI Extras version 0.24a
>  Couldn't get the DSDT table header
>  Error registering Asus Laptop ACPI Extras Driver 
>        -0420: *** Error: Could not allocate an object descriptor
>pty: 2048 Unix98 ptys configured
>Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
>ttyS0 at 0x03f8 (irq = 4) is a 16550A
>ttyS1 at 0x02f8 (irq = 3) is a 16550A
>Real Time Clock Driver v1.10e
>NET4: Frame Diverter 0.46
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 00:1f.1
>PCI: Found IRQ 9 for device 00:1f.1
>PCI: Sharing IRQ 9 with 00:1d.2
>ICH4: chipset revision 2
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
>hda: WDC WD300BB-00AUA1, ATA DISK drive
>blk: queue c040f3a0, I/O limit 4095Mb (mask 0xffffffff)
>hdd: JLMS DVD-ROM LTD-166S, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: attached ide-disk driver.
>hda: host protected area => 1
>hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=3649/255/63, UDMA(100)
>Partition check:
> hda: hda1 hda2 hda3 hda4 < hda5 >
>ide: late registration of driver.
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Initializing Cryptographic API
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP, IGMP
>IP: routing cache hash table of 8192 buckets, 64Kbytes
>TCP: Hash tables configured (established 262144 bind 65536)
>Linux IP multicast router 0.06 plus PIM-SM
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>RAMDISK: Compressed image found at block 0
>Freeing initrd memory: 338k freed
>VFS: Mounted root (ext2 filesystem).
>SCSI subsystem driver Revision: 1.00
>ohci1394: $Rev: 1010 $ Ben Collins <bcollins@debian.org>
>PCI: Found IRQ 9 for device 02:09.0
>ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[d5000000-d50007ff]  Max Packet=[2048]
>sbp2: $Rev: 1010 $ Ben Collins <bcollins@debian.org>
>Journalled Block Device driver loaded
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00309526b0042585]
>Freeing unused kernel memory: 136k freed
>usb.c: registered new driver usbdevfs
>usb.c: registered new driver hub
>PCI: Found IRQ 11 for device 00:1d.7
>PCI: Sharing IRQ 11 with 02:0b.0
>PCI: Setting latency timer of device 00:1d.7 to 64
>ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2
>ehci_hcd 00:1d.7: irq 11, pci mem f08b1000
>usb.c: new USB bus registered, assigned bus number 1
>ehci_hcd 00:1d.7: enabled 64bit PCI DMA
>PCI: cache line size of 128 is not supported by device 00:1d.7
>ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
>hub.c: USB hub found
>hub.c: 6 ports detected
>usb-uhci.c: $Revision: 1.275 $ time 14:48:11 Sep 22 2003
>usb-uhci.c: High bandwidth mode enabled
>PCI: Found IRQ 9 for device 00:1d.0
>PCI: Sharing IRQ 9 with 01:00.0
>PCI: Setting latency timer of device 00:1d.0 to 64
>usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 9
>usb-uhci.c: Detected 2 ports
>usb.c: new USB bus registered, assigned bus number 2
>hub.c: USB hub found
>hub.c: 2 ports detected
>PCI: Found IRQ 9 for device 00:1d.1
>PCI: Setting latency timer of device 00:1d.1 to 64
>usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 9
>usb-uhci.c: Detected 2 ports
>usb.c: new USB bus registered, assigned bus number 3
>hub.c: USB hub found
>hub.c: 2 ports detected
>PCI: Found IRQ 9 for device 00:1d.2
>PCI: Sharing IRQ 9 with 00:1f.1
>PCI: Setting latency timer of device 00:1d.2 to 64
>usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 9
>usb-uhci.c: Detected 2 ports
>usb.c: new USB bus registered, assigned bus number 4
>hub.c: USB hub found
>hub.c: 2 ports detected
>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
>usb.c: registered new driver hiddev
>usb.c: registered new driver hid
>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
>hid-core.c: USB HID support drivers
>mice: PS/2 mouse device common for all mice
>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
>Adding Swap: 1566328k swap-space (priority -1)
>hub.c: new USB device 00:1d.2-2, assigned address 2
>usb-uhci.c: interrupt, status 3, frame# 1856
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>hiddev0: USB HID v1.00 Device [American Power Conversion Back-UPS Office 500 FW: 4.3.D USB FW: d1] on usb4:2.0
>hub.c: new USB device 00:1d.1-1, assigned address 2
>input: USB HID v1.10 Keyboard [045e:000b] on usb3:2.0
>hub.c: new USB device 00:1d.1-2, assigned address 3
>input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb3:3.0

Actions: View

Attachments on bug 105799: 94783