Attachment 948200 Details for Bug 1154347 – hdparm -I /dev/sda > hdparm-ssd.txt

hdparm -I /dev/sda > hdparm-ssd.txt

hdparm-ssd.txt (text/plain), 3.04 KB, created by bob on 2014-10-19 05:07:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: bob

Created: 2014-10-19 05:07:30 UTC

Size: 3.04 KB

patch

obsolete

>
>/dev/sda:
>
>ATA device, with non-removable media
>	Model Number:       INTEL SSDSC2CT180A3                    
>	Serial Number:      CVMP218***********  
>	Firmware Revision:  300i    
>	Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
>Standards:
>	Used: unknown (minor revision code 0x0110) 
>	Supported: 9 8 7 6 5 
>	Likely used: 9
>Configuration:
>	Logical		max	current
>	cylinders	16383	16383
>	heads		16	16
>	sectors/track	63	63
>	--
>	CHS current addressable sectors:   16514064
>	LBA    user addressable sectors:  268435455
>	LBA48  user addressable sectors:  351651888
>	Logical  Sector size:                   512 bytes
>	Physical Sector size:                   512 bytes
>	Logical Sector-0 offset:                  0 bytes
>	device size with M = 1024*1024:      171705 MBytes
>	device size with M = 1000*1000:      180045 MBytes (180 GB)
>	cache/buffer size  = unknown
>	Nominal Media Rotation Rate: Solid State Device
>Capabilities:
>	LBA, IORDY(can be disabled)
>	Queue depth: 32
>	Standby timer values: spec'd by Standard, no device specific minimum
>	R/W multiple sector transfer: Max = 16	Current = 16
>	Advanced power management level: 254
>	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
>	     Cycle time: min=120ns recommended=120ns
>	PIO: pio0 pio1 pio2 pio3 pio4 
>	     Cycle time: no flow control=120ns  IORDY flow control=120ns
>Commands/features:
>	Enabled	Supported:
>	   *	SMART feature set
>	    	Security Mode feature set
>	   *	Power Management feature set
>	   *	Write cache
>	    	Look-ahead
>	   *	Host Protected Area feature set
>	   *	WRITE_BUFFER command
>	   *	READ_BUFFER command
>	   *	NOP cmd
>	   *	DOWNLOAD_MICROCODE
>	   *	Advanced Power Management feature set
>	    	Power-Up In Standby feature set
>	   *	SET_FEATURES required to spinup after power up
>	   *	48-bit Address feature set
>	   *	Mandatory FLUSH_CACHE
>	   *	FLUSH_CACHE_EXT
>	   *	SMART error logging
>	   *	SMART self-test
>	   *	General Purpose Logging feature set
>	   *	WRITE_{DMA|MULTIPLE}_FUA_EXT
>	   *	64-bit World wide name
>	   *	IDLE_IMMEDIATE with UNLOAD
>	   *	WRITE_UNCORRECTABLE_EXT command
>	   *	{READ,WRITE}_DMA_EXT_GPL commands
>	   *	Segmented DOWNLOAD_MICROCODE
>	   *	Gen1 signaling speed (1.5Gb/s)
>	   *	Gen2 signaling speed (3.0Gb/s)
>	   *	Gen3 signaling speed (6.0Gb/s)
>	   *	Native Command Queueing (NCQ)
>	   *	Host-initiated interface power management
>	   *	Phy event counters
>	   *	unknown 76[14]
>	   *	DMA Setup Auto-Activate optimization
>	    	Device-initiated interface power management
>	   *	Software settings preservation
>	   *	SMART Command Transport (SCT) feature set
>	   *	SCT Data Tables (AC5)
>	   *	Data Set Management TRIM supported (limit 1 block)
>	   *	Deterministic read data after TRIM
>Security: 
>	Master password revision code = 65534
>		supported
>	not	enabled
>	not	locked
>	not	frozen
>	not	expired: security count
>		supported: enhanced erase
>	4min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT. 
>Logical Unit WWN Device Identifier: 5001517bb2905e50
>	NAA		: 5
>	IEEE OUI	: 001517
>	Unique ID	: bb2905e50
>Checksum: correct

Actions: View

Attachments on bug 1154347: 948200 | 948201 | 949241 | 949242 | 950551 | 950552 | 951932 | 951944 | 951945 | 951946 | 951963 | 951964