Attachment 948201 Details for Bug 1154347 – hdparm -I /dev/sdb > hdparm-hdd.txt

hdparm -I /dev/sdb > hdparm-hdd.txt

hdparm-hdd.txt (text/plain), 2.69 KB, created by bob on 2014-10-19 05:09:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: bob

Created: 2014-10-19 05:09:43 UTC

Size: 2.69 KB

patch

obsolete

>
>/dev/sdb:
>
>ATA device, with non-removable media
>	Model Number:       WDC WD800AAJS-18TDA1                    
>	Serial Number:      WD-WMAM9*******
>	Firmware Revision:  01.00A04
>Standards:
>	Supported: 7 6 5 4 
>	Likely used: 8
>Configuration:
>	Logical		max	current
>	cylinders	16383	16383
>	heads		16	16
>	sectors/track	63	63
>	--
>	CHS current addressable sectors:   16514064
>	LBA    user addressable sectors:  156250000
>	LBA48  user addressable sectors:  156250000
>	Logical/Physical Sector size:           512 bytes
>	device size with M = 1024*1024:       76293 MBytes
>	device size with M = 1000*1000:       80000 MBytes (80 GB)
>	cache/buffer size  = 8192 KBytes
>Capabilities:
>	LBA, IORDY(can be disabled)
>	Queue depth: 32
>	Standby timer values: spec'd by Standard, with device specific minimum
>	R/W multiple sector transfer: Max = 16	Current = 0
>	Recommended acoustic management value: 128, current value: 254
>	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
>	     Cycle time: min=120ns recommended=120ns
>	PIO: pio0 pio1 pio2 pio3 pio4 
>	     Cycle time: no flow control=120ns  IORDY flow control=120ns
>Commands/features:
>	Enabled	Supported:
>	   *	SMART feature set
>	    	Security Mode feature set
>	   *	Power Management feature set
>	   *	Write cache
>	   *	Look-ahead
>	   *	Host Protected Area feature set
>	   *	WRITE_BUFFER command
>	   *	READ_BUFFER command
>	   *	NOP cmd
>	   *	DOWNLOAD_MICROCODE
>	    	Power-Up In Standby feature set
>	   *	SET_FEATURES required to spinup after power up
>	    	SET_MAX security extension
>	    	Automatic Acoustic Management feature set
>	   *	48-bit Address feature set
>	   *	Device Configuration Overlay feature set
>	   *	Mandatory FLUSH_CACHE
>	   *	FLUSH_CACHE_EXT
>	   *	SMART error logging
>	   *	SMART self-test
>	   *	General Purpose Logging feature set
>	   *	WRITE_{DMA|MULTIPLE}_FUA_EXT
>	   *	64-bit World wide name
>	   *	Gen1 signaling speed (1.5Gb/s)
>	   *	Gen2 signaling speed (3.0Gb/s)
>	   *	Native Command Queueing (NCQ)
>	   *	Host-initiated interface power management
>	   *	Phy event counters
>	   *	DMA Setup Auto-Activate optimization
>	    	Device-initiated interface power management
>	   *	Software settings preservation
>	   *	SMART Command Transport (SCT) feature set
>	   *	SCT Read/Write Long (AC1), obsolete
>	   *	SCT Write Same (AC2)
>	   *	SCT Error Recovery Control (AC3)
>	   *	SCT Features Control (AC4)
>	   *	SCT Data Tables (AC5)
>	    	unknown 206[12] (vendor specific)
>Security: 
>	Master password revision code = 65534
>		supported
>	not	enabled
>	not	locked
>	not	frozen
>	not	expired: security count
>	not	supported: enhanced erase
>	24min for SECURITY ERASE UNIT. 
>Logical Unit WWN Device Identifier: 50014ee00101da6f
>	NAA		: 5
>	IEEE OUI	: 0014ee
>	Unique ID	: 00101da6f
>Checksum: correct

Actions: View

Attachments on bug 1154347: 948200 | 948201 | 949241 | 949242 | 950551 | 950552 | 951932 | 951944 | 951945 | 951946 | 951963 | 951964