Attachment 949122 Details for Bug 1155168 – tc4 log

tc4 log

beta log tc4.txt (text/plain), 11.83 KB, created by dannyking20022001 on 2014-10-21 20:33:08 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: dannyking20022001

Created: 2014-10-21 20:33:08 UTC

Size: 11.83 KB

patch

obsolete

>4096 MB Detected
>
>ProLiant System BIOS - P52 (07/16/2007)
>Copyright 1982, 2007 Hewlett-Packard Development Company, L.P.
>
>
>Processor 1 initialized at 3.40 GHz/800 MHz(1 Mbyte L2)
>Processor 2 initialized at 3.40 GHz/800 MHz(1 Mbyte L2)
>
>Advanced Memory Protection Mode: Advanced ECC Support
>Redundant ROM Detected - This system contains a valid backup system ROM.
>1615-Power Supply Failure, or Power Supply Unplugged in Bay 1
>
>
>                    4096 MB Initialized /  4096 MB Detected
>
>
>
>ProLiant System BIOS - P52 (07/16/2007)
>
>  Press <F8> to run the Option ROM Configuration for Arrays Utility
>  Press <ESC> to skip configuration and continue
>
>Copyright 1982, 2007 Hewlett-Packard Development Company, L.P.
>
>Processor 1 initialized at 3.40 GHz/800 MHz(1 Mbyte L2)
>
>Processor 2 initialized at 3.40 GHz/800 MHz(1 Mbyte L2)
>
>Integrated Lights-Out Standard 1.96 Apr 16 2014 <IP unknown>
>
>Slot 0  HP Smart Array 6i Controller         (192MB, v2.58)   1 Logical Drive
>1794-Slot 0 Drive Array - Array Accelerator Battery Charge Low
>     Array Accelerator Posted-Write Cache is temporarily disabled.m ROM.
>     Array Accelerator batteries have failed to charge and should be replaced
>1615-Power Supply Failure, or Power Supply Unplugged in Bay 1
>
>
> Press "F1"  key to continue
> Press "F9"  key for ROM-Based Setup Utility
> Press "F10" key for System Maintenance Menu
> For access via BIOS Serial Console
> Press "ESC+1" to continue
> Press "ESC+9" for ROM-Based Setup Utility
> Press "ESC+0" for System Maintenance Menu
>
>Attempting Boot From USB DriveKey (C:)
>
>ISOLINUX 6.02  EHDD Copyright (C) 1994-2013 H. Peter Anvin et al
>
>
>
>Probing EDD (edd=off to disable)... ok
>
>
>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.16.1-301.fc21.x86_64 (mockbuild@bkernel01.phx2.fe
>doraproject.org) (gcc version 4.9.1 20140813 (Red Hat 4.9.1-7) (GCC) ) #1 SMP Mo
>n Aug 25 13:06:39 UTC 2014
>[    0.000000] Command line: BOOT_IMAGE=vmlinuz0 initrd=initrd0.img root=live:CD
>LABEL=Fedora-Live-Workstation-x86_64-2 rootfstype=auto ro rd.live.image rhgb rd.
>luks=0 rd.md=0 rd.dm=0 console=ttyS0,9600
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfff2fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000dfff3000-0x00000000dfffafff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000dfffb000-0x00000000dfffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011bffefff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.3 present.
>[    0.000000] e820: last_pfn = 0x11bfff max_arch_pfn = 0x400000000
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] e820: last_pfn = 0xdfff3 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff
>8800000f4fa0]
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000] init_memory_mapping: [mem 0x11bc00000-0x11bdfffff]
>[    0.000000] init_memory_mapping: [mem 0x118000000-0x11bbfffff]
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x117ffffff]
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xdfff2fff]
>[    0.000000] init_memory_mapping: [mem 0x11be00000-0x11bffefff]
>[    0.000000] RAMDISK: [mem 0x7dbbf000-0x7fffffff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000F4F20 000024 (v02 HP    )
>[    0.000000] ACPI: XSDT 0x00000000DFFF32C0 00004C (v01 HP     P52      0000000
>2 Ò?   0000162E)
>[    0.000000] ACPI: FACP 0x00000000DFFF3340 0000F4 (v03 HP     P52      0000000
>2 Ò?   0000162E)
>[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock
>: 32, using default 16 (20140424/tbfadt-699)
>[    0.000000] ACPI: DSDT 0x00000000DFFF3440 0018FE (v01 HP     DSDT     0000000
>1 INTL 20030228)
>[    0.000000] ACPI: FACS 0x00000000DFFF3100 000040
>[    0.000000] ACPI: SPCR 0x00000000DFFF3140 000050 (v01 HP     SPCRRBSU 0000000
>1 Ò?   0000162E)
>[    0.000000] ACPI: MCFG 0x00000000DFFF31C0 00003C (v01 HP     ProLiant 0000000
>1      00000000)
>[    0.000000] ACPI: APIC 0x00000000DFFF3200 0000B6 (v01 HP     00000083 0000000
>2      00000000)
>[    0.000000] ACPI: SSDT 0x00000000DFFF8000 0002CD (v01 HP     SSDTP    0000000
>1 INTL 20030228)
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011bffefff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11bffefff]
>[    0.000000]   NODE_DATA [mem 0x11bfeb000-0x11bffefff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x11bffefff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0xdfff2fff]
>[    0.000000]   node   0: [mem 0x100000000-0x11bffefff]
>[    0.000000] ACPI: PM-Timer IO Port: 0x908
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: IOAPIC (id[0x09] address[0xfec10000] gsi_base[24])
>[    0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec10000, GSI 24-47
>[    0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec82000] gsi_base[48])
>[    0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec82000, GSI 48-71
>[    0.000000] ACPI: IOAPIC (id[0x0b] address[0xfec82400] gsi_base[72])
>[    0.000000] IOAPIC[3]: apic_id 11, version 32, address 0xfec82400, GSI 72-95
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdfff3000-0xdfffafff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdfffb000-0xdfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xffbfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
>[    0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node
>_ids:1
>[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011ba00000 s87872 r8192 d227
>20 u262144
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pag
>es: 1015931
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=vmlinuz0 initrd=initrd0.img root=
>live:CDLABEL=Fedora-Live-Workstation-x86_64-2 rootfstype=auto ro rd.live.image r
>hgb rd.luks=0 rd.md=0 rd.dm=0 console=ttyS0,9600
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Memory: 3941748K/4128320K available (7326K kernel code, 1196K rwd
>ata, 3156K rodata, 1452K init, 1504K bss, 186572K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000]  RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
>[    0.000000]  Offload RCU callbacks from all CPUs
>[    0.000000]  Offload RCU callbacks from CPUs: 0-7.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:65792 nr_irqs:1968 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [ttyS0] enabled
>[    0.000000] allocated 16777216 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memor
>y cgroups
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 3400.160 MHz processor
>[    0.004027] Calibrating delay loop (skipped), value calculated using timer fr
>equency.. 6800.32 BogoMIPS (lpj=3400160)
>[    0.006005] pid_max: default: 32768 minimum: 301
>[    0.007022] ACPI: Core revision 20140424
>[    0.010523] ACPI: All ACPI Tables successfully acquired
>[    0.013184] Security Framework initialized
>[    0.014019] SELinux:  Initializing.
>[    0.016081] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes
>)
>[    0.020927] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.022941] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.023040] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>
>[    0.025257] Initializing cgroup subsys memory
>[    0.026052] Initializing cgroup subsys devices
>[    0.027016] Initializing cgroup subsys freezer
>[    0.028009] Initializing cgroup subsys net_cls
>[    0.029013] Initializing cgroup subsys blkio
>[    0.030023] Initializing cgroup subsys perf_event
>[    0.031007] Initializing cgroup subsys net_prio
>[    0.032020] Initializing cgroup subsys hugetlb
>[    0.033051] CPU: Physical Processor ID: 3
>[    0.033051] CPU: Physical Processor ID: 3
>[    0.035005] mce: CPU supports 4 MCE banks
>[    0.036016] CPU0: Thermal monitoring enabled (TM1)
>[    0.037014] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
>[    0.037014] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
>[    0.037014] tlb_flushall_shift: 6
>[    0.038119] Freeing SMP alternatives memory: 24K (ffffffff81e98000 - ffffffff
>81e9e000)
>[    0.041295] ftrace: allocating 26743 entries in 105 pages
>[    0.054512] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.065356] smpboot: CPU0: Intel(R) Xeon(TM) CPU 3.40GHz (fam: 0f, model: 04,
> stepping: 01)
>[    0.070000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
>
>[    0.072004] ... version:                0
>[    0.073002] ... bit width:              40
>[    0.074001] ... generic registers:      18
>[    0.075002] ... value mask:             000000ffffffffff
>[    0.076002] ... max period:             0000007fffffffff
>[    0.077002] ... fixed-purpose events:   0
>[    0.078002] ... event mask:             000000000003ffff
>[    0.081770] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PM
>U counter.
>[    0.082180] x86: Booting SMP configuration:
>[    0.083004] .... node  #0, CPUs:      #1

Actions: View

Attachments on bug 1155168: 948974 | 949058 | 949059 | 949122