Attachment 95117 Details for Bug 106838 – dmesg output with nogui

dmesg output with nogui

dmesg_nogui (text/plain), 9.14 KB, created by Miloš Komarčević on 2003-10-11 15:00:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Miloš Komarčević

Created: 2003-10-11 15:00:32 UTC

Size: 9.14 KB

patch

obsolete

>Linux version 2.4.22-1.2087.nptl (bhcompile@daffy.perf.redhat.com) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #1 Sat Oct 4 09:42:49 EDT 2003
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000011fd0000 (usable)
> BIOS-e820: 0000000011fd0000 - 0000000011fdf000 (ACPI data)
> BIOS-e820: 0000000011fdf000 - 0000000011fe0000 (ACPI NVS)
> BIOS-e820: 0000000011fe0000 - 0000000012000000 (reserved)
> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>287MB LOWMEM available.
>ACPI: have wakeup address 0xc0001000
>On node 0 totalpages: 73680
>zone(0): 4096 pages.
>zone(1): 69584 pages.
>zone(2): 0 pages.
>ACPI disabled because your bios is from 1999 and too old
>You can enable it with acpi=force
>IBM machine detected. Enabling interrupts during APM calls.
>Kernel command line: ro root=LABEL=/ acpi=off nogui
>Initializing CPU#0
>Detected 91.948 MHz processor.
>Console: colour VGA+ 80x25
>Calibrating delay loop... 222.82 BogoMIPS
>Memory: 287468k/294720k available (1499k kernel code, 6864k reserved, 1106k data, 136k init, 0k highmem)
>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
>Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
>CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
>CPU: Intel Mobile Pentium II stepping 0a
>Enabling fast FPU save and restore... done.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
>mtrr: detected mtrr type: Intel
>ACPI: Subsystem revision 20030918
>ACPI: Interpreter disabled.
>PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
>PCI: Using configuration type 1
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
>Limiting direct PCI/PCI transfers.
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
>Starting kswapd
>VFS: Disk quotas vdquot_6.5.1
>pty: 2048 Unix98 ptys configured
>Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
>ttyS0 at 0x03f8 (irq = 4) is a 16550A
>Real Time Clock Driver v1.10e
>NET4: Frame Diverter 0.46
>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 00:07.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio
>hda: IBM-DCXA-210000, ATA DISK drive
>blk: queue c040afa0, I/O limit 4095Mb (mask 0xffffffff)
>hdc: Compaq DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: attached ide-disk driver.
>hda: host protected area => 1
>hda: 19640880 sectors (10056 MB) w/420KiB Cache, CHS=1299/240/63, UDMA(33)
>Partition check:
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>ide: late registration of driver.
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Initializing Cryptographic API
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP, IGMP
>IP: routing cache hash table of 2048 buckets, 16Kbytes
>TCP: Hash tables configured (established 32768 bind 65536)
>Linux IP multicast router 0.06 plus PIM-SM
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>RAMDISK: Compressed image found at block 0
>Freeing initrd memory: 160k freed
>VFS: Mounted root (ext2 filesystem).
>Journalled Block Device driver loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Freeing unused kernel memory: 136k freed
>usb.c: registered new driver usbdevfs
>usb.c: registered new driver hub
>usb-uhci.c: $Revision: 1.275 $ time 09:50:25 Oct  4 2003
>usb-uhci.c: High bandwidth mode enabled
>PCI: Found IRQ 11 for device 00:07.2
>usb-uhci.c: USB UHCI at I/O 0x8400, IRQ 11
>usb-uhci.c: Detected 2 ports
>usb.c: new USB bus registered, assigned bus number 1
>hub.c: USB hub found
>hub.c: 2 ports detected
>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
>usb.c: registered new driver hiddev
>usb.c: registered new driver hid
>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
>hid-core.c: USB HID support drivers
>hub.c: new USB device 00:07.2-1, assigned address 2
>usb.c: USB device 2 (vend/prod 0x59b/0x32) is not claimed by any active driver.
>mice: PS/2 mouse device common for all mice
>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
>Adding Swap: 325040k swap-space (priority -1)
>SCSI subsystem driver Revision: 1.00
>Initializing USB Mass Storage driver...
>usb.c: registered new driver usb-storage
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-uhci.c: interrupt, status 3, frame# 816
>  Vendor: IOMEGA    Model: ZIP 250           Rev: 90.V
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>WARNING: USB Mass Storage data integrity not assured
>USB Mass Storage device found at 2
>USB Mass Storage support registered.
>inserting floppy driver for 2.4.22-1.2087.nptl
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
>ad1848: No ISAPnP cards found, trying standard ones...
>cs4232: set synthio and synthirq to use the wavefront facilities.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
>parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
>ip_tables: (C) 2000-2002 Netfilter core team
>Linux Kernel Card Services 3.1.22
>  options:  [pci] [cardbus] [pm]
>PCI: Found IRQ 11 for device 00:02.0
>PCI: Sharing IRQ 11 with 00:06.0
>PCI: Sharing IRQ 11 with 01:00.0
>PCI: Found IRQ 11 for device 00:02.1
>Yenta IRQ list 0698, PCI irq11
>Socket status: 30000006
>Yenta IRQ list 0698, PCI irq11
>Socket status: 30000020
>cs: cb_alloc(bus 5): vendor 0x10b7, device 0x5257
>PCI: Enabling device 05:00.0 (0000 -> 0003)
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>See Documentation/networking/vortex.txt
>05:00.0: 3Com PCI 3CCFE575CT Tornado CardBus at 0x4800. Vers LK1.1.18-ac
>PCI: Setting latency timer of device 05:00.0 to 64
> 00:00:86:5c:fc:b3, IRQ 11
>  product code 5a45 rev 10.0 date 03-09-00
>05:00.0: CardBus functions mapped 12c00080->d291a080
>  Internal config register is 80600000, transceivers 0x40.
>  8K byte-wide RAM 5:3 Rx:Tx split, MII interface.
>  MII transceiver found at address 0, status 7809.
>  Enabling bus-master transmits and whole-frame receives.
>05:00.0: scatter/gather enabled. h/w checksums enabled
>divert: allocating divert_blk for eth0
>ip_tables: (C) 2000-2002 Netfilter core team
>cs: IO port probe 0x0c00-0x0cff: clean.
>cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x388-0x38f 0x3b8-0x3df 0x4d0-0x4d7
>cs: IO port probe 0x0a00-0x0aff: clean.
>eth0: Setting full-duplex based on MII #0 link partner capability of 45e1.
>hdc: attached ide-cdrom driver.
>hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.12
>hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
>hdc: drive_cmd: error=0x04Aborted Command 
>Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
>sda: Unit Not Ready, sense:
>Current 00:00: sense key Not Ready
>Additional sense indicates Medium not present
>usb-uhci.c: interrupt, status 3, frame# 2013
>sda : READ CAPACITY failed.
>sda : status = 1, message = 00, host = 0, driver = 08 
>Current sd00:00: sense key Not Ready
>Additional sense indicates Medium not present
>sda : block size assumed to be 512 bytes, disk size 1GB.  
> sda: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> unable to read partition table
>sda: Unit Not Ready, sense:
>Current 00:00: sense key Not Ready
>Additional sense indicates Medium not present
>sda : READ CAPACITY failed.
>sda : status = 1, message = 00, host = 0, driver = 08 
>Current sd00:00: sense key Not Ready
>Additional sense indicates Medium not present
>sda : block size assumed to be 512 bytes, disk size 1GB.  
>sda: Write Protect is off
> sda: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> unable to read partition table
>Device not ready.  Make sure there is a disc in the drive.
>cs4232: set synthio and synthirq to use the wavefront facilities.
>parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
>lp0: using parport0 (polling).
>lp0: console ready

Actions: View

Attachments on bug 106838: 95116 | 95117