Attachment 102915 Details for Bug 130414 – output of dmesg

output of dmesg

dmesg.txt (text/plain), 12.03 KB, created by drago01 on 2004-08-20 07:59:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: drago01

Created: 2004-08-20 07:59:19 UTC

Size: 12.03 KB

patch

obsolete

>Linux version 2.6.8-1.521 (bhcompile@tweety.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon Aug 16 09:01:18 EDT 2004
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
> BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
> BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>user-defined physical RAM map:
> user: 0000000000000000 - 000000000009fc00 (usable)
> user: 000000000009fc00 - 00000000000a0000 (reserved)
> user: 00000000000d0000 - 00000000000d8000 (reserved)
> user: 00000000000f0000 - 0000000000100000 (reserved)
> user: 0000000000100000 - 000000002fff0000 (usable)
> user: 000000002fff0000 - 000000002fff8000 (ACPI data)
> user: 000000002fff8000 - 0000000030000000 (ACPI NVS)
> user: 00000000fec00000 - 00000000fec01000 (reserved)
> user: 00000000fee00000 - 00000000fee01000 (reserved)
> user: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>767MB LOWMEM available.
>zapping low mappings.
>On node 0 totalpages: 196592
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 192496 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v000 AMI                                       ) @ 0x000fa940
>ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x2fff0000
>ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x2fff0030
>ACPI: MADT (v001 AMIINT VIA_K7   0x00000009 MSFT 0x00000097) @ 0x2fff00c0
>ACPI: DSDT (v001    VIA   VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/  rhgb acpi=on mem=768M selinux=0 vga=791 hdb=noprobe
>ide_setup: hdb=noprobe
>mapped 4G/4G trampoline to ffff3000.
>Initializing CPU#0
>CPU 0 irqstacks, hard=023c7000 soft=023c6000
>PID hash table entries: 4096 (order 12: 32768 bytes)
>Detected 2089.378 MHz processor.
>Using tsc for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 775120k/786368k available (2012k kernel code, 10456k reserved, 651k data, 140k init, 0k highmem)
>Calibrating delay loop... 4112.38 BogoMIPS
>Security Scaffold v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
>CPU: After vendor identify, caps:  0383fbff c1c3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps:        0383f3ff c1c3fbff 00000000 00000020
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: AMD Athlon(tm) XP 2800+ stepping 00
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 188k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040326
>ACPI: IRQ9 SCI: Edge set to Level Trigger.
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
>vesafb: framebuffer at 0xd8000000, mapped to 0x32807000, size 3072k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at c000:ef30
>vesafb: scrolling: redraw
>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
>fb0: VESA VGA frame buffer device
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1092995417.618:0): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 9488DB81FF525AA3
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>ksign: invalid packet (ctb=00)
>Unable to load default keyring: error=74
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports C1)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Console: switching to colour frame buffer device 128x48
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected VIA KT400/KT400A/KT600 chipset
>agpgart: Maximum main memory to use for agp memory: 690M
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:11.1
>ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
>hda: ST3120022A, ATA DISK drive
>Using cfq io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hdc: LITE-ON DVDRW LDW-811S, ATAPI CD/DVD-ROM drive
>hdd: LITE-ON LTR-52246S, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 1024KiB
>hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
> hda: hda1 hda2 hda3 hda4 < hda5 >
>hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>input: AT Translated Set 2 keyboard on isa0060/serio0
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 2048 buckets, 64Kbytes
>TCP: Hash tables configured (established 262144 bind 37449)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S4 S5)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>RAMDISK: Compressed image found at block 0
>VFS: Mounted root (ext2 filesystem).
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Freeing unused kernel memory: 140k freed
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device 0235c2a0(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 5 (level, low) -> IRQ 5
>ehci_hcd 0000:00:10.3: EHCI Host Controller
>ehci_hcd 0000:00:10.3: irq 5, pci mem 32b64e00
>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: irq 11, io base 0000d800
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: irq 10, io base 0000dc00
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: irq 5, io base 0000e000
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-1: new low speed USB device using address 2
>input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.0-1
>EXT3 FS on hda3, internal journal
>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
>cdrom: open failed.
>cdrom: open failed.
>Adding 522072k swap on /dev/hda5.  Priority:-1 extents:1
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>NTFS driver 2.1.15 [Flags: R/O MODULE].
>NTFS volume version 3.1.
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 10 (level, low) -> IRQ 10
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>0000:00:06.0: 3Com PCI 3c900 Cyclone 10Mbps TPO at 0xe800. Vers LK1.1.19
>divert: allocating divert_blk for eth0
>ip_tables: (C) 2000-2002 Netfilter core team
>eth0: no IPv6 routers present
>ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
>Linux video capture interface: v1.00
>saa7130/34: v4l2 driver version 0.2.12 loaded
>ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 5 (level, low) -> IRQ 5
>saa7134[0]: found at 0000:00:07.0, rev: 1, irq: 5, latency: 32, mmio: 0xdffff800
>saa7134[0]: subsystem: 11bd:002b, board: Pinnacle PCTV Stereo (saa7134) [card=26,autodetected]
>saa7134[0]: board init: gpio is 0
>saa7134[0]: i2c eeprom 00: bd 11 2b 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
>saa7134[0]: i2c eeprom 10: 00 00 19 0e ff 20 ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 53 ff ff ff ff
>saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>tuner: chip found at addr 0xc0 i2c-bus saa7134[0]
>tuner: type set to 33 (MT20xx universal) by saa7134[0]
>tuner: microtune: companycode=3cbf part=42 rev=2f
>tuner: microtune MT2050 found, OK
>tda9885/6/7: chip found @ 0x86
>saa7134[0]: registered device video0 [v4l2]
>saa7134[0]: registered device vbi0
>mtrr: 0xd8000000,0x4000000 overlaps existing 0xd8000000,0x200000

Actions: View

Attachments on bug 130414: 102915