Attachment 98936 Details for Bug 119301 – dmesg

dmesg

dmesg.txt (text/plain), 16.29 KB, created by jan p. springer on 2004-03-29 15:48:20 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: jan p. springer

Created: 2004-03-29 15:48:20 UTC

Size: 16.29 KB

patch

obsolete

>Linux version 2.6.3-2.1.253.2.1-jsd04 (root@anton05.bruckner.home) (gcc version 3.3.3 20040311 (Red Hat Linux 3.3.3-3)) #4 Thu Mar 25 21:16:26 CET 2004
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
> BIOS-e820: 000000003f7d0000 - 000000003f7df000 (ACPI data)
> BIOS-e820: 000000003f7df000 - 000000003f800000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>1015MB LOWMEM available.
>On node 0 totalpages: 260048
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 255952 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v000 ACPIAM                                    ) @ 0x000f5590
>ACPI: RSDT (v001 A M I  OEMRSDT  0x09000301 MSFT 0x00000097) @ 0x3f7d0000
>ACPI: FADT (v002 A M I  OEMFACP  0x09000301 MSFT 0x00000097) @ 0x3f7d0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x09000301 MSFT 0x00000097) @ 0x3f7d0390
>ACPI: OEMB (v001 A M I  AMI_OEM  0x09000301 MSFT 0x00000097) @ 0x3f7df040
>ACPI: DSDT (v001  244II 244II107 0x00000107 INTL 0x02002026) @ 0x00000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:9 APIC version 20
>ACPI: IOAPIC (id[0x01] address[0xfec00000] global_irq_base[0x0])
>IOAPIC[0]: Assigned apic_id 1
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, IRQ 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: PM-Timer IO Port: 0xe408
>Using ACPI (MADT) for SMP configuration information
>Built 1 zonelists
>Kernel command line: ro root=/dev/hda4 vga=0x307 selinux=0
>mapped 4G/4G trampoline to fffeb000.
>current: 02302a60
>current->thread_info: 0237a000
>Initializing CPU#0
>PID hash table entries: 4096 (order 12: 32768 bytes)
>Detected 1593.824 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Memory: 1025904k/1040192k available (1756k kernel code, 13536k reserved, 774k data, 244k init, 0k highmem)
>zapping low mappings.
>Calibrating delay loop... 3162.11 BogoMIPS
>Security Scaffold v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 199k freed
>CPU:     After generic identify, caps: a7e9fbbf 00000000 00000000 00000000
>CPU:     After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU:     After all inits, caps: a7e9f3bf 00000000 00000000 00000040
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: Intel(R) Pentium(R) M processor 1600MHz stepping 05
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>enabled ExtINT on CPU#0
>ESR value before enabling vector: 00000000
>ESR value after enabling vector: 00000000
>ENABLING IO-APIC IRQs
>init IO_APIC IRQs
> IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
>..TIMER: vector=0x31 pin1=2 pin2=-1
>Using local APIC timer interrupts.
>calibrating APIC timer ...
>..... CPU clock speed is 1593.0297 MHz.
>..... host bus clock speed is 99.0581 MHz.
>NET: Registered protocol family 16
>EISA bus registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040220
>IOAPIC[0]: Set PCI routing entry (1-9 -> 0x71 -> IRQ 9 Mode:1 Active:0)
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: Embedded Controller [EC0] (gpe 28)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>PnPBIOS: Scanning system for PnP BIOS support...
>PnPBIOS: Found PnP BIOS installation structure at 0x020f32c0
>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x418a, dseg 0xf0000
>PNPBIOS fault.. attempting recovery.
>PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue
>PnPBIOS: You may need to reboot with the "nobiospnp" option to operate stably
>PnPBIOS: Check with your vendor for an updated BIOS
>PnPBIOS: get_dev_node: unexpected status 0x28
>PnPBIOS: 6 nodes reported by PnP BIOS; 6 recorded by driver
>IOAPIC[0]: Set PCI routing entry (1-17 -> 0xa9 -> IRQ 17 Mode:1 Active:1)
>00:00:1f[B] -> 1-17 -> IRQ 169
>IOAPIC[0]: Set PCI routing entry (1-18 -> 0xb1 -> IRQ 18 Mode:1 Active:1)
>00:00:1f[A] -> 1-18 -> IRQ 177
>IOAPIC[0]: Set PCI routing entry (1-16 -> 0xb9 -> IRQ 16 Mode:1 Active:1)
>00:00:1d[A] -> 1-16 -> IRQ 185
>IOAPIC[0]: Set PCI routing entry (1-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1)
>00:00:1d[B] -> 1-19 -> IRQ 193
>IOAPIC[0]: Set PCI routing entry (1-23 -> 0xc9 -> IRQ 23 Mode:1 Active:1)
>00:00:1d[D] -> 1-23 -> IRQ 201
>IOAPIC[0]: Set PCI routing entry (1-20 -> 0xd1 -> IRQ 20 Mode:1 Active:1)
>00:01:08[A] -> 1-20 -> IRQ 209
>IOAPIC[0]: Set PCI routing entry (1-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1)
>00:01:01[A] -> 1-22 -> IRQ 217
>IOAPIC[0]: Set PCI routing entry (1-21 -> 0xe1 -> IRQ 21 Mode:1 Active:1)
>00:01:00[A] -> 1-21 -> IRQ 225
>number of MP IRQ sources: 15.
>number of IO-APIC #1 registers: 24.
>testing the IO APIC.......................
>IO APIC #1......
>.... register #00: 01000000
>.......    : physical APIC id: 01
>.......    : Delivery Type: 0
>.......    : LTS          : 0
>.... register #01: 00178020
>.......     : max redirection entries: 0017
>.......     : PRQ implemented: 1
>.......     : IO APIC version: 0020
>.... register #02: 00000000
>.......     : arbitration: 00
>.... register #03: 00000001
>.......     : Boot DT    : 1
>.... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
> 00 000 00  1    0    0   0   0    0    0    00
> 01 001 01  1    0    0   0   0    1    1    39
> 02 001 01  0    0    0   0   0    1    1    31
> 03 001 01  0    0    0   0   0    1    1    41
> 04 001 01  0    0    0   0   0    1    1    49
> 05 001 01  0    0    0   0   0    1    1    51
> 06 001 01  0    0    0   0   0    1    1    59
> 07 001 01  0    0    0   0   0    1    1    61
> 08 001 01  0    0    0   0   0    1    1    69
> 09 001 01  0    1    0   0   0    1    1    71
> 0a 001 01  0    0    0   0   0    1    1    79
> 0b 001 01  0    0    0   0   0    1    1    81
> 0c 001 01  0    0    0   0   0    1    1    89
> 0d 001 01  0    0    0   0   0    1    1    91
> 0e 001 01  0    0    0   0   0    1    1    99
> 0f 001 01  0    0    0   0   0    1    1    A1
> 10 001 01  1    1    0   1   0    1    1    B9
> 11 001 01  1    1    0   1   0    1    1    A9
> 12 001 01  1    1    0   1   0    1    1    B1
> 13 001 01  1    1    0   1   0    1    1    C1
> 14 001 01  1    1    0   1   0    1    1    D1
> 15 001 01  1    1    0   1   0    1    1    E1
> 16 001 01  1    1    0   1   0    1    1    D9
> 17 001 01  1    1    0   1   0    1    1    C9
>IRQ to pin mappings:
>IRQ0 -> 0:2
>IRQ1 -> 0:1
>IRQ3 -> 0:3
>IRQ4 -> 0:4
>IRQ5 -> 0:5
>IRQ6 -> 0:6
>IRQ7 -> 0:7
>IRQ8 -> 0:8
>IRQ9 -> 0:9-> 0:9
>IRQ10 -> 0:10
>IRQ11 -> 0:11
>IRQ12 -> 0:12
>IRQ13 -> 0:13
>IRQ14 -> 0:14
>IRQ15 -> 0:15
>IRQ16 -> 0:16
>IRQ17 -> 0:17
>IRQ18 -> 0:18
>IRQ19 -> 0:19
>IRQ20 -> 0:20
>IRQ21 -> 0:21
>IRQ22 -> 0:22
>IRQ23 -> 0:23
>.................................... done.
>PCI: Using ACPI for IRQ routing
>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
>vesafb: framebuffer at 0xf0000000, mapped to 0x4200c000, size 8000k
>vesafb: mode is 1280x1024x8, linelength=1280, pages=5
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>fb0: VESA VGA frame buffer device
>Machine check exception polling timer started.
>Total HugeTLB memory allocated, 0
>ikconfig 0.7 with /proc/config*
>audit: initializing netlink socket (disabled)
>audit(1080581128.005:0): initialized
>VFS: Disk quotas dquot_6.5.1
>Initializing Cryptographic API
>cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Console: switching to colour frame buffer device 160x64
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected an Intel 855 Chipset.
>agpgart: Maximum main memory to use for agp memory: 933M
>agpgart: Detected 8060K stolen memory.
>agpgart: AGP aperture is 128M @ 0xf0000000
>mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x400000
>[drm] Initialized i830 1.3.2 20021108 on minor 0
>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ICH4: chipset revision 3
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
>hda: HTS726060M9AT00, ATA DISK drive
>Using anticipatory io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hdc: Slimtype COMBO LSC-24082K, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 1024KiB
>hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
> hda: hda1 hda2 hda3 hda4
>Console: switching to colour frame buffer device 160x64
>mice: PS/2 mouse device common for all mice
>i8042.c: Detected active multiplexing controller, rev 1.0.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>input: AT Translated Set 2 keyboard on isa0060/serio0
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>EISA: Probing bus 0 at eisa0
>EISA: Detected 0 cards.
>NET: Registered protocol family 2
>IP: routing cache hash table of 8192 buckets, 64Kbytes
>TCP: Hash tables configured (established 262144 bind 65536)
>BIOS EDD facility v0.12 2004-Jan-26, 1 devices found
>Please report your BIOS at http://linux.dell.com/edd/results.html
>PM: Reading pmdisk image.
>try_name("hda2", 0)
>try_name("hda", 2)
>PM: Resume from disk failed.
>ACPI: (supports S0 S1 S3 S4 S5)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>try_name("hda4", 0)
>try_name("hda", 4)
>RAMDISK: Compressed image found at block 0
>VFS: Mounted root (ext2 filesystem).
>kjournald starting.  Commit interval 600 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Freeing unused kernel memory: 244k freed
>NET: Registered protocol family 1
>Real Time Clock Driver v1.12
>ACPI: AC Adapter [AC0] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Processor [CPU1] (supports C1 C2 C3, 8 throttling states)
>ACPI: Thermal Zone [THRM] (75 C)
>drivers/usb/core/usb.c: registered new driver usbfs
>drivers/usb/core/usb.c: registered new driver hub
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: irq 201, pci mem 4288f400
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>USB Universal Host Controller Interface driver v2.2
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: irq 185, io base 0000dea0
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: irq 193, io base 0000dec0
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: irq 177, io base 0000df40
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 3-2: new low speed USB device using address 2
>EXT3 FS on hda4, internal journal
>Adding 1510100k swap on /dev/hda3.  Priority:-1 extents:1
>Synaptics Touchpad, model: 1
> Firmware: 4.1
> Sensor: 8
> new absolute packet format
>input: SynPS/2 Synaptics TouchPad on isa0060/serio2
>ts: Compaq touchscreen protocol output
>kjournald starting.  Commit interval 600 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>NTFS driver 2.1.6 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>drivers/usb/core/usb.c: registered new driver hiddev
>drivers/usb/input/hid-core.c: ctrl urb status -75 received
>drivers/usb/input/hid-ff.c: hid_ff_init could not find initializer
>input: USB HID v1.10 Mouse [Cypress Semi. Cypress Ultra Mouse] on usb-0000:00:1d.1-2
>drivers/usb/core/usb.c: registered new driver hid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1172 $ Ben Collins <bcollins@debian.org>
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[217]  MMIO=[fe8fd800-fe8fdfff]  Max Packet=[2048]
>blk: queue 41681c00, I/O limit 4095Mb (mask 0xffffffff)
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d4924404aec]
>speedstep-centrino: assuming Enhanced SpeedStep is enabled (jsd)
>speedstep-centrino: found "Intel(R) Pentium(R) M processor 1600MHz": max
>frequency: 1600000kHz
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (8126 buckets, 65008 max) - 296 bytes per conntrack
>NET: Registered protocol family 17
>e100: Intel(R) PRO/100 Network Driver, 3.0.16
>e100: Copyright(c) 1999-2004 Intel Corporation
>divert: allocating divert_blk for eth0
>e100: eth0: e100_probe: addr 0xfe8ff000, irq 209, MAC addr 00:03:0D:03:08:AD
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>ipw2100: no version for "struct_module" found: kernel tainted.
>ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 0.38
>ipw2100: Copyright(c) 2003-2004 Intel Corporation
>divert: allocating divert_blk for eth1
>Detected ipw2100 PCI device at 0000:01:02.0, dev: eth1, mem:
>0xFE8FE000-0xFE8FEFFF -> 42a17000, irq: 201
>Bluetooth: Core ver 2.4
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.1
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM ver 1.2
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device 0233e640(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>eth0: no IPv6 routers present
>mtrr: base(0xf0020000) is not aligned on a size(0x800000) boundary
>mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x400000
>Linux video capture interface: v1.00
>bttv: driver version 0.9.12 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 43405 usecs
>intel8x0: clocking to 48000
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>SCSI subsystem initialized
>

Actions: View

Attachments on bug 119301: 98928 | 98929 | 98930 | 98931 | 98932 | 98933 | 98934 | 98935 | 98936 | 98937