Back to bug 1388063
| Who | When | What | Removed | Added |
|---|---|---|---|---|
| Harish NV Rao | 2016-10-24 11:32:48 UTC | Target Release | 3 | 2 |
| CC | hnallurv | |||
| Red Hat Bugzilla Rules Engine | 2016-10-24 11:32:54 UTC | Target Release | 2 | 3 |
| Paul Cuzner | 2016-10-25 03:59:46 UTC | Status | NEW | ASSIGNED |
| CC | pcuzner | |||
| Paul Cuzner | 2016-10-25 04:59:00 UTC | CC | mchristi | |
| Flags | needinfo?(mchristi) | |||
| Mike Christie | 2016-10-25 16:01:35 UTC | Assignee | shan | pcuzner |
| Flags | needinfo?(mchristi) | |||
| Paul Cuzner | 2016-10-27 05:01:02 UTC | Status | ASSIGNED | ON_QA |
| Ken Dreyer (Red Hat) | 2016-10-27 23:36:37 UTC | Target Release | 3 | 2 |
| CC | kdreyer | |||
| Fixed In Version | ceph-iscsi-config-1.4-1.el7cp ceph-iscsi-config-1.4-1.el7cp | |||
| Tejas | 2016-11-02 09:24:54 UTC | Status | ON_QA | VERIFIED |
| Ken Dreyer (Red Hat) | 2016-11-02 14:48:03 UTC | Status | VERIFIED | POST |
| Jason Dillaman | 2016-11-02 15:46:09 UTC | CC | jdillama | |
| Depends On | 1388557 | |||
| Jason Dillaman | 2016-11-02 15:49:14 UTC | Doc Type | If docs needed, set a value | Known Issue |
| Ken Dreyer (Red Hat) | 2016-11-02 19:00:43 UTC | Blocks | 1383917 | |
| Mike Christie | 2016-11-02 21:08:21 UTC | Doc Text | Cause: The device-mapper-multipath rbd path checker only supports the default cluster name, ceph. Consequence: iSCSI gateway setup will fail during LUN creation. Workaround (if any): On the "seed_monitor" host (as defined in your ceph-iscsi-gw Ansible configuration file), make a symlink from "/etc/ceph/<your cluster name>.conf" to "/etc/ceph/ceph.conf" and also from "/etc/ceph/<your cluster name>.client.admin.keyring" to "/etc/ceph/ceph.client.admin.keyring". Result: The Ansible playbook will find the configuration files it is looking for and will allow device-mapper-multipath rbd path checker to connect to the "ceph" cluster. |
|
| Mike Christie | 2016-11-03 00:29:59 UTC | Doc Text | Cause: The device-mapper-multipath rbd path checker only supports the default cluster name, ceph. Consequence: iSCSI gateway setup will fail during LUN creation. Workaround (if any): On the "seed_monitor" host (as defined in your ceph-iscsi-gw Ansible configuration file), make a symlink from "/etc/ceph/<your cluster name>.conf" to "/etc/ceph/ceph.conf" and also from "/etc/ceph/<your cluster name>.client.admin.keyring" to "/etc/ceph/ceph.client.admin.keyring". Result: The Ansible playbook will find the configuration files it is looking for and will allow device-mapper-multipath rbd path checker to connect to the "ceph" cluster. | Cause: The device-mapper-multipath rbd path checker only supports the default cluster name, ceph. Consequence: iSCSI gateway setup will fail during LUN creation due to the device-multipath-mapper-multipath failure during initialization. The "ansible-playbook ceph-iscsi-gw.yml" command will fail with the error, "Could not find dm multipath device for <image_name>." Workaround (if any): In ceph-iscsi-gw, cluster_name must be set to ceph, and gateway_keyring must be set to ceph.client.admin.keyring. On the "seed_monitor" host (as defined in your ceph-iscsi-gw Ansible configuration file), make a symlink from "/etc/ceph/<your cluster name>.conf" to "/etc/ceph/ceph.conf" and also from "/etc/ceph/<your cluster name>.client.admin.keyring" to "/etc/ceph/ceph.client.admin.keyring". Result: The device-mapper-multipath rbd path checker will be able to connect to clusters not using the default ceph naming, and the ansible-playbook command will succeed during gateway setup. |
| Andrew Schoen | 2016-11-03 01:01:04 UTC | CC | aschoen | |
| Red Hat Bugzilla Rules Engine | 2016-11-03 22:18:06 UTC | Target Release | 2 | 3 |
| Mike Christie | 2016-11-04 04:30:41 UTC | Doc Type | Known Issue | If docs needed, set a value |
| Mike Christie | 2016-11-04 04:31:09 UTC | Doc Text | Cause: The device-mapper-multipath rbd path checker only supports the default cluster name, ceph. Consequence: iSCSI gateway setup will fail during LUN creation due to the device-multipath-mapper-multipath failure during initialization. The "ansible-playbook ceph-iscsi-gw.yml" command will fail with the error, "Could not find dm multipath device for <image_name>." Workaround (if any): In ceph-iscsi-gw, cluster_name must be set to ceph, and gateway_keyring must be set to ceph.client.admin.keyring. On the "seed_monitor" host (as defined in your ceph-iscsi-gw Ansible configuration file), make a symlink from "/etc/ceph/<your cluster name>.conf" to "/etc/ceph/ceph.conf" and also from "/etc/ceph/<your cluster name>.client.admin.keyring" to "/etc/ceph/ceph.client.admin.keyring". Result: The device-mapper-multipath rbd path checker will be able to connect to clusters not using the default ceph naming, and the ansible-playbook command will succeed during gateway setup. | undefined |
| Doc Type | If docs needed, set a value | No Doc Update | ||
| Ken Dreyer (Red Hat) | 2016-11-04 17:16:22 UTC | Status | POST | MODIFIED |
| Target Release | 3 | 2 | ||
| Blocks | 1383917 | |||
| Fixed In Version | ceph-iscsi-config-1.4-1.el7cp ceph-iscsi-config-1.4-1.el7cp | ceph-iscsi-config-1.5-1.el7cp ceph-iscsi-config-1.5-1.el7cp | ||
| Doc Text | undefined | |||
| errata-xmlrpc | 2016-11-04 17:18:18 UTC | Status | MODIFIED | ON_QA |
| Tejas | 2016-11-04 18:26:26 UTC | Status | ON_QA | VERIFIED |
| Doc Text | undefined | |||
| Bara Ancincova | 2016-11-07 09:30:56 UTC | Depends On | 1388557 | |
| errata-xmlrpc | 2016-11-22 18:43:02 UTC | Status | VERIFIED | RELEASE_PENDING |
| errata-xmlrpc | 2016-11-22 23:42:00 UTC | Status | RELEASE_PENDING | CLOSED |
| Resolution | --- | ERRATA | ||
| Last Closed | 2016-11-22 18:42:00 UTC |
Back to bug 1388063