Bug 1399186

+++ This bug was initially created as a clone of Bug #1398257 +++

Description of problem:
Volume is still visible under export list #showmount -e localhost even after volume is in stopped state.
Export ID of the nodes are different for the same export volume while performing volume start and stop


Version-Release number of selected component (if applicable):
glusterfs-3.8.4-5.el7rhgs.x86_64

# rpm -qa | grep ganesha
glusterfs-ganesha-3.8.4-5.el7rhgs.x86_64
nfs-ganesha-debuginfo-2.4.1-1.el7rhgs.x86_64
nfs-ganesha-2.4.1-1.el7rhgs.x86_64
nfs-ganesha-gluster-2.4.1-1.el7rhgs.x86_64


How reproducible:

Consistently


Steps to Reproduce:
1.Create and start the volume 

gluster volume create volganesha1 replica 2 10.70.47.3:/mnt/data1/b1 10.70.47.159:/mnt/data1/b1 10.70.46.241:/mnt/data1/b1 10.70.46.219:/mnt/data1/b1/ 10.70.47.3:/mnt/data2/b2 10.70.47.159:/mnt/data2/b2 10.70.46.241:/mnt/data2/b2 10.70.46.219:/mnt/data2/b2/ 10.70.47.3:/mnt/data3/b3 10.70.47.159:/mnt/data3/b3 10.70.46.241:/mnt/data3/b3 10.70.46.219:/mnt/data3/b3/

2.gluster vol set volganesha1 ganesha.enable on

3.showmount -e localhost 

# showmount -e localhost
Export list for localhost:
/volganesha1 (everyone)

4.Checked export id on all four nodes.Export ID was 2
# dbus-send --type=method_call --print-reply --system --dest=org.ganesha.nfsd /org/ganesha/nfsd/ExportMgr org.ganesha.nfsd.exportmgr.ShowExports

5.Stop the volume

6.Check Showmount -e localhost
No volume is exported

7.Again start the same volume volganesha1

8.Check showmount -e localhost.
Volume is exported on all the 4 nodes with ID=2

9.Repeat steps from 5 to 8 for 3 times.Each Time when the volume is started ,Export ID is 2.

10.Stop the volume volganesha1

11.Delete the Volume volganesha1

12.Create and start a new Volume volganesha2

13.gluster vol set volganesha2 ganesha.enable on

14.Check showmount -e localhost.Volume is exported with ID=3 on all the four nodes

15.Stop the volume volganesha2.Check showmount -e localhost.Volume is not there.

16.Again start the same volume volganesha2.Check showmount -e localhost.Volume is exported but with DIFFERENT EXPORT IP.

Out of 4 nodes,three nodes have export ID 3 and one node has export ID as 4.

17.Stop the volume volganesha2.


Actual Result:

After stopping the volume,the volume is still visible in showmount -e localhost on three nodes out of four

Export ID is different on the nodes

Observed the following messages in /var/log/ganesha.log

24/11/2016 15:36:44 : epoch 82a00000 : dhcp46-219.lab.eng.blr.redhat.com : ganesha.nfsd-18193[dbus_heartbeat] glusterfs_create_export :FSAL :EVENT :Volume volganesha2 exported at : '/'
24/11/2016 15:37:58 : epoch 82a00000 : dhcp46-219.lab.eng.blr.redhat.com : ganesha.nfsd-18193[dbus_heartbeat] dbus_message_entrypoint :DBUS :MAJ :Method (RemoveExport) on (org.ganesha.nfsd.exportmgr) failed: name = (org.freedesktop.DBus.Error.InvalidArgs), message = (lookup_export failed with Export id not found)


Expected Result:
After stopping the volume should be unexported successfully.
Export ID should be same in all the 4 nodes when the volume is exported.

--- Additional comment from Red Hat Bugzilla Rules Engine on 2016-11-24 05:56:35 EST ---

This bug is automatically being proposed for the current release of Red Hat Gluster Storage 3 under active development, by setting the release flag 'rhgs‑3.2.0' to '?'. 

If this bug should be proposed for a different release, please manually change the proposed release flag.

--- Additional comment from Manisha Saini on 2016-11-24 07:21:29 EST ---

sosreport present at -

http://rhsqe-repo.lab.eng.blr.redhat.com/sosreports/1398257/